Samsung SGH T639 User Manual

SGH-T639 Series  
P O R T A B L E Q u a d - B A N D  
M O B I L E  
P H O N E  
User Guide  
Please read this manual before operating your  
phone, and keep it for future reference.  
T639_UVGF3_CH_080107_F12  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE  
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE  
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF  
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT  
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE  
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE  
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE  
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR  
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY  
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,  
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF  
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
T639_UVGF3_CH_080107_F12  
Table of Contents  
4
Table of Contents  
5
6
SIM Card Information  
Section 1: Getting Started  
Topics Covered  
This section describes the first steps to operating your phone.  
SIM Card Information  
When you subscribe for 3G cellular network services, you receive a plug-in USIM  
(Universal Subscriber Identity Module) card loaded with your subscription details,  
such as your PIN, and available optional services.  
Install and charge the phone  
1. If necessary, power-off the phone by holding down the  
key until the  
power-off image displays.  
2. Remove the battery by pressing the battery lock down and slide the battery  
cover away, as shown.  
3. Carefully lift the battery cover away from the bottom of the phone.  
Getting Started  
7
           
4. Lift and remove the battery.  
Inserting the SIM card  
Important!: The plug-in SIM card and its contacts can be easily damaged by scratches or bending. Use  
caution when inserting or removing the card and keep all SIM cards out of reach of children.  
Make sure the gold contacts of the card are face down, then slide the SIM card into  
the socket.  
Inserting the Memory Card  
Your phone is supports an optional memory card (microSD™). The memory card is  
designed to use with this mobile phone and other devices. You can store information  
on this memory card such as music, pictures, video or other files.  
8
     
SIM Card Information  
1. Lift up the memory card cover, located on the right side of the phone as  
shown. Make sure the microSD’s gold contact pins face downward.  
d Cover  
Memory Car  
Correct  
2. The following is the incorrect method for inserting the Memory Card.  
Memory Card Cover  
Incorrect  
3. Gently push the microSD card into the slot until you hear a click sound.  
Note: The click indicates that the card is secured in the slot.  
4. To remove the memory card, push the card further into the slot and then  
release. the card ejects itself from the slot. You will hear the click sound  
when the card releases.  
Installing the Battery  
1. Align the battery tabs with the slots at the bottom of the phone.  
2. Press the battery down until it clicks into place. Make sure that the battery  
is properly installed before switching on the phone.  
Getting Started  
9
   
3. With the battery in position on the phone, place the cover back on the  
handset and slide it in until it clicks.  
Charging a Battery  
Your phone is powered by a rechargeable Li-ion battery. Use the travel adaptor to  
charge the battery, and use only Samsung approved batteries and chargers.  
Note: You must fully charge the battery before using your phone for the first time. A fully discharged battery  
requires up to 4 hours of charge time.  
Warning!: For connection to an electrical supply not located in the U.S., you must use an adaptor of the  
proper configuration for the power outlet. Use of the wrong adaptor could damage your phone  
and void your warranty.  
10  
   
SIM Card Information  
1. Plug the connector of the travel adaptor into the jack on the side of the  
phone.  
+
Warning!: The previous illustration displays the incorrect method for connecting the charger. If attempted,  
damage to the accessory port will occur therefore voiding the phone’s warranty.  
2. Plug the adaptor into a standard AC wall outlet.  
3. When charging is finished, first unplug the adapter’s power plug from the  
AC wall outlet and then disconnect the travel adapter’s connector from the  
phone.  
4. Remove the adapter from the phone by gently pulling the connector out.  
Warning!: Failure to unplug the travel adapter before you remove the battery, can cause the phone to  
become damaged.  
Getting Started 11  
Low Battery Indicator  
When the battery is weak and only a few minutes of talk time remain, a warning tone  
sounds, the “Low battery” message repeats at regular intervals on the display, and  
the empty battery icon  
blinks. The backlight turns off to conserve the  
remaining battery power.  
If the battery level becomes too low, the phone automatically turns off. Recharge  
your battery.  
Turning the Phone On or Off  
1. Open the phone.  
2. Press and hold the  
key until the phone power-on screen displays.  
Note: Do not turn on the phone when mobile phone use is prohibited.  
3. If the phone asks you to enter a password, enter a password and press the  
Confirm  
soft key or the  
key. For further details, see "Change  
The phone searches for your network and after finding it, the Idle mode  
displays. Now, you can make or receive calls.  
Note: The display language is preset to Automatic at the factory. To change the language, use the  
Language menu. For further details, see "Phone settings" on page 118.  
4. When you wish to switch off the phone, press and hold the  
key until  
the power-off image displays.  
Note: You must store the voicemail server number before accessing the server. Your service provider can  
give you the number.  
Setting Up Your Voice Mail  
To access you voice mail from your keypad, use the following steps:  
1. Open the phone to access your keypad.  
2. In Idle mode, press and hold the  
key.  
3. Follow the voice mail prompts to access messages.  
12  
         
Setting Up Your Voice Mail  
Accessing Your Voice Mail  
1. In Idle mode, press the Menu  
soft key to access Menu mode.  
2. Highlight Call records and press the Select  
(Left) soft key or the  
key.  
3. Highlight Voice mail and press the Select  
(Left) soft key or the  
key.  
4. Highlight Connect to voice mail and press the Select  
or the key.  
(Left) soft key  
Tip: Press the  
key to quickly access Voice Mail.  
5. When connected, follow the voice prompts from the voice mail center.  
Changing the Voice Mail Name and Number  
Your SIM card gives you default service number of the voice mail center. However,  
you may need to change the number. Use the following procedures to change your  
voice mail number.  
1. In Idle mode, press the Menu  
soft key to access Menu mode.  
2. Highlight Call records and press the Select  
(Left) soft key or the  
key.  
3. Highlight Voice mail and press the Select  
(Left) soft key or the  
key.  
4. Highlight Voice mail number and press the Select  
the key.  
(Left) soft key or  
5. Press the Edit softkey.  
6. Highlight Name and press and press  
to delete the current name from  
the Voice Service and then use your keypad to enter a replacement name.  
-OR-  
7. Highlight Center address and press  
to delete the current Voice Mail  
Number number.  
8. Enter your new Voice Server number and press the Save soft key or the  
key to save this new number.  
9. Press the  
key to return to Idle mode.  
Getting Started 13  
   
Section 2: Understanding Your Phone  
Topics Covered  
Help  
This section outlines some key features of your phone. It also displays the screen  
and the icons that are displayed when the phone is in use.  
Features of Your Phone  
Your phone is lightweight, easy-to-use and offers many significant features. The  
following list outlines a few of the features included in your phone.  
User friendly, menu driven access to features and options.  
Bluetooth  
Camera and camcorder  
Instant Messaging capability  
Featured applications provide alarms, calendar, calculator, voice notes, converter,  
timer, stopwatch, synchronizer, and world time.  
File viewer  
Name card  
Picture Message  
Multimedia capability (with included Media player)  
Photo caller ID  
Speakerphone capability  
Web browser  
14  
       
Open View of Your Phone  
Open View of Your Phone  
The following illustrations show the main elements of your phone:  
17. Earpiece  
1. Display  
2. Navigation  
keys  
16. OK (Select) key  
15. Soft key (right)  
3. Soft key (left)  
14. Shortcut key  
4. Headset jack/  
Adapter jack  
13. Power on/off/Menu Exit key  
12. Clear key  
5. Volume key  
6. t-zone key  
7. Send key  
11. Alphanumeric keypad  
10. Microphone  
8. Voicemail key  
9. Special function  
keys  
Keys  
The following list correlates to the open and front view illustrations.  
1. Display: This screen displays all the information needed to operate your  
phone.  
2. Navigation keys: This key allows you to scroll through phone menu  
options and provides a shortcut to phone functions from standby mode.  
3. Soft key (Left): Performs the functions indicated by the screen text on the  
bottom of the display.  
4. Headset jack/Adapter jack: Allows you to plug in the travel adapter  
(power), PC connection cable (data transfer), and optional headset for safe,  
convenient, hands-free conversations.  
5. Volume key: Allows you to adjust the ringer volume in standby mode or  
adjust the voice volume during a call. The volume key can also be used to  
scroll up or down to navigate through the different menu options. To mute  
the ringer during an incoming call, press the volume key up or down.  
When the phone is closed, press and hold these keys to toggle the display  
on or off. This key is also used when the Music Player is active.  
Understanding Your Phone 15  
   
6. t-zone key: In Idle mode, acts as a t-zone shortcut key.  
7. Send key: Allows you to place or receive a call. In standby mode, press the  
key once to access the Recent Call log. If you press and hold the key down,  
you initiate the most recent call from the Recent Call log.  
8. Voicemail key: Press and hold the  
key to automatically dial your  
voicemail.  
character for calling  
to display the Symbol  
9. Special Function keys: Asterisk enters the  
features. In text mode, press and hold  
characters.  
character for calling  
features. In text entry mode, press to toggle to the different text modes.  
Pound/Space key-enters the pound  
Press and hold the  
text mode, the  
to toggle from Silent profile to Normal profile. In  
key places a space between characters.  
10. Microphone: The Microphone allows the other callers to hear you clearly  
when you are speaking to them.  
11. Alphanumeric keypad: Use these keys to enter numbers, letters and  
some special characters. When in Idle mode, press and hold the  
key to  
access your voicemail server or press and hold  
International call prefix.  
to enter an  
12. Clear key: Deletes characters from the display when you are in text entry  
mode. Deletes items when in an application. When in a main menu, press  
to return to the previous menu.  
13. Power on/off/Menu Exit key: Ends a call. Press and hold this key for a  
few seconds to power your phone On or Off. While in the main menu, it  
returns the phone to standby mode and cancels you input. When you  
receive an incoming call, press to reject call.  
14. Shortcut key: Opens the application switch window which allows you to  
select from a group of different applications without having to exit from the  
currently active application.  
15. Soft key (Right): Performs the functions indicated by the screen text on  
the bottom of the display.  
16. OK (Select) key: Allows you to accept the choices offered when navigating  
through a menu.  
17. Earpiece: Used to listen to audio from your phone.  
16  
Closed View of Your Phone  
Closed View of Your Phone  
1. Camera lens  
4. Memory card slot  
3. Camera key  
2. Front LCD  
Keys  
The following list correlates to the open and front view illustrations.  
1. Camera lens: The camera lens is used for taking photos.  
2. Front LCD: Your phone has an external display on the front of the phone. It  
indicates when you have an incoming call or message. It also displays  
date, time, reception, battery power, and any icons associated with alerts,  
such as messages, or a set alarm.  
3. Camera key: While in Idle mode, holding down this key for a few seconds  
launches an on screen menu which provides access to the Camera or  
Video recorder. While in camera mode, this key allows you take/snap a  
picture.  
4. Memory card slot: Used to install an optional microSD™ (memory) card  
for additional data storage.  
Back Light  
A back light illuminates the display and the keypad when you press any key or open  
the phone. It turns off when no keys are pressed within a given period of time,  
and/or dims the light, depending on the settings in the Backlight Time menu.  
Understanding Your Phone 17  
           
Internal Display Layout  
The display has 3 areas:  
Icons  
Apr. 4  
Wed.  
10:58  
Text and graphics area  
T-Mobile  
Phonebook  
Menu  
Soft key function indicators  
Icons  
Displays the received signal strength. The greater the number  
of bars, the stronger the signal.  
Shows the level of your battery. The more bars you see, the  
more power you have remaining.  
Displays when the phone’s profile is set to Normal. This  
indicates that the phone’s incoming Alert Type is set to melody.  
This audio icon is accompanied on screen by the Driving icon.  
Note: The default phone profile is Normal.  
Displays when the phone’s profile is set to Silent. In this case,  
the speaker is muted and the phone only vibrates.  
Displays when the phone’s profile is set to Driving. In this case,  
the speaker is active. In this case, the speaker is active and  
launches the currently selected ringtone or melody when the  
associated notification is activated. This icon is accompanied  
on screen by the Audio icon.  
18  
   
Internal Display Layout  
Displays when the phone’s profile is set to Outdoor. In this case,  
the speaker is active, the volume settings are raised to their  
highest levels, and any currently active ringtones or melodies  
are activated.  
Displays when an incoming call Alert Type is set to Airplane.  
This indicates that the phone’s incoming Alert Type allows you  
to use many of your phone’s features, such as Games, Music,  
Voice Memos, etc., but you cannot send or receive any calls or  
access online information.  
Displays when Bluetooth wireless technology is active. When  
transferring data, this icon blinks red and blue.  
Displays when a Bluetooth wireless headset is active and  
in use.  
Displays when the phone is synchronizing data with the  
network.  
Displays the first time your phone synchronizes with  
the network.  
Displays when a call is in progress.  
Displays when you there is no network coverage available.  
When you are out of the service area, you cannot make or  
receive voice calls.  
Displays when your incoming phone calls are forwarded to  
another number.  
Displays when a new voice mail is received.  
Displays when a new voice note is received.  
Displays when a new text message is received.  
Displays when a new picture message is received.  
Understanding Your Phone 19  
Displays when a push-messages is received from the  
WAP server.  
Displays when a new Over the Air (OTA) software update file is  
received.  
Displays after your memory card is inserted.  
H
Displays when you are connected to a PC via a USB port.  
Displays when you are browing the internet with a Personal  
Computer.  
Displays when you are connected to a secured web page.  
Displays when an alarm is set on your phone.  
Selecting Functions and Options  
Your phone offers a set of functions that can be customized for your ease and  
specific needs. These functions are arranged in menus and sub-menus, accessed  
using the two soft keys. Each menu and sub-menu allows you to view and alter the  
settings of a particular function.  
In some functions, you may be asked for a password or PIN. Enter the code and  
press the Select  
(Left) soft key or the  
key.  
When you access a list of options, your phone highlights the currently active option.  
If, however, there are only two options, such as On/Off or Enable/Disable, your  
phone highlights the option that is not currently active, so that you can select it  
directly.  
Selecting Options  
To view the various functions and options available and to select the one you want:  
Press the appropriate soft key.  
To select the function displayed or the option highlighted, press the Select  
(Left) soft key or the  
key.  
To view the next function or highlight the next option on a list, press the Down  
Navigation key or the key on the left side of the phone.  
20  
   
Command Keys  
To move back to the previous function or option on a list, press the Up Navigation  
key or the key on the left side of the phone.  
To move back up one level in the menu structure, press the Back soft key.  
To exit the menu structure without changing the settings, press the  
key.  
Command Keys  
Functions for the soft keys are defined by what appears above each in the display.  
There are two soft keys, the left soft key  
and the right soft key  
.
Corresponding  
Right Softkey selection  
Corresponding  
Left Softkey selection  
Menu  
Phonebook  
Right Softkey  
Left Softkey  
Soft Keys  
The roles of the soft keys vary depending on the function you are currently using; the  
labels on the bottom line of the display just above each key indicate their current  
role.  
Left Soft Key  
Some functions of the left soft key are as follows.  
In the Idle mode, press the Menu  
When in a menu mode the left soft key  
Right Soft Key  
soft key to open the Menu screen.  
function is Select.  
Some functions of the right soft key are as follows.  
When in a menu mode the right soft key function is Back.  
Understanding Your Phone 21  
           
Clear Key  
The CLR key  
is used to erase or clear numbers, text, or symbols from the  
display. You can also use  
mode from any menu.  
to return to a previous menu or to return to standby  
If you enter an incorrect character, briefly press  
character.  
to backspace (and delete) the  
To erase the entire sentence, press and hold  
.
To back up one menu level, briefly press  
.
End Key  
The End key  
is used to turn on/off your phone, disconnect calls, and return to  
the standby mode.  
Press and hold the End key  
Briefly press once to disconnect a call.  
to return to standby mode from any menu, or to cancel the last input.  
to turn on your phone.  
Press  
Send Key  
The Send key  
is used to answer calls, dial calls, and to recall the last number(s)  
dialed, received, or missed.  
Press  
once to answer calls.  
Enter a number and briefly press  
to make a call.  
Briefly press  
your phone.  
in standby mode to display a list of recent calls to and from  
Press  
Press  
twice in standby mode to call the most recent number.  
to pick up a waiting call.  
Help  
Help is designed to work with t-zones to show you some of the unique features of  
your phone. You can search help files on the fly while traveling, at home or  
anywhere, using help.wap.t-mobile.com.  
1. In Idle mode, press the Menu  
2. Using the Navigation keys, scroll to the Help icon. Press the Select  
(Left) soft key or the key.  
soft key to access the Menu mode.  
3. The T-Mobile Help menu is then displayed with the following options  
available:  
• Browse Help Topics: this option gives you a list of different topics from which  
you can select.  
22  
         
Help  
• Enter a Search: this option allows you to search based on a keyword.  
• My Account: this option provides you with account specific information such as  
your current status, current activity, Bill Summary, Plan & Services, Voicemail  
Settings, Find a Retail Store, and FAQ’s & Info.  
• About: this option offers general information about T-Mobile Help including  
concept and site design, copyright information, and contact email address.  
To access the browser options menu:  
Press the Options (Left) soft key.  
Note: The menus may vary, depending on your t-zones subscription.  
For more information on browser options, see "Selecting and Using Menu Options"  
Understanding Your Phone 23  
24  
Section 3: Call Functions  
Topics Covered  
This section describes how to make or answer a call. It also includes the features  
and functionality associated with making or answering a call.  
Making a Call  
When the Idle mode displays, enter the area code and phone number, and press the  
key.  
Note: When you activate the Auto Redial option in the Voice Call menu, the phone automatically redials up  
to 10 times when the person does not answer the call or is already on the phone.  
Making an International Call  
1. Press and hold the  
key. The + character appears.  
2. Enter the country code, area code, and phone number, then press the  
key.  
Correcting an Entered Number  
Use the following steps to correct a mis-typed entry when dialing.  
1. After entering a number:  
Press the  
To clear another digit in the number, press the Left or Right Navigation key until  
the cursor is immediately to the right of the digit to clear. Press the key.  
key to clear the last digit displayed.  
To enter a missing digit press the Left or Right Navigation key until the cursor is  
in position and enter the digit.  
To clear the whole display, press and hold the  
2. Press the key to return to the Idle mode.  
key. The Idle mode displays.  
24  
           
Answering a Call  
Ending a Call  
When you want to finish your call, briefly press the  
Redialing the Last Number  
key.  
All incoming, outgoing and missed calls are listed in the All Calls Menu. If the  
number or caller is listed in your Phonebook, the name associated displays.  
To access the All calls menu:  
1. From the Idle mode, press the Menu  
soft key. Use the navigation keys  
to highlight Call records and press the Select  
(Left) soft key or the  
key.  
2. Highlight the All calls option by pressing the Up and Down Navigation  
keys and press the Select (Left) soft key or the key.  
Tip: From the Idle mode, press the  
key to display a list of the most recent numbers used in the order  
you dialed or received them.  
3. Use the Up and Down Navigation keys to scroll through the numbers until  
the number you want highlights.  
4. To dial the number, highlight the number and press the  
key.  
Making a Call from the Phonebook  
You can store phone numbers that you use regularly on the SIM card or in the  
phone’s memory. These entries are collectively called the Phonebook.  
Once you store a number in the Phonebook, you can dial it by pressing a few keys  
using the Speed Dial feature.  
Answering a Call  
When a call is received the phone rings and displays the caller’s phone number, or  
name if stored in the Phonebook.  
1. From the Idle mode press the  
key or the Accept  
soft key to  
answer the incoming call.  
If the Any key option in the Call Settings menu is activated, you can press  
any key to answer a call except for the  
key.  
key and the Reject  
soft  
If the Active flip option in the Call Settings menu is activated, you can  
answer the call simply by opening the phone.  
Call Functions 25  
         
Note: To reject an incoming call, press and hold the Volume keys on the left side of the phone before  
opening the phone. A quick press of side volume key silences the ringer on an incoming call.  
2. Press the  
key to return to Idle mode.  
Note: You can answer a call while using the Phonebook or menu features. After ending the call, the phone  
returns to the function screen you were using.  
All Calls  
The phone stores the numbers of the calls you’ve dialed, received, or missed in the  
All calls menu. If the number or caller is listed in your Phonebook, the associated  
name displays.  
Viewing Missed Calls  
The number of calls you missed displays on both the Idle mode and the front panel  
LCD. To view the number details, use the following steps:  
1. If the phone is closed, open the phone.  
2. From the Idle mode, press the Menu  
soft key. Use the navigation keys  
to highlight Call records and press the Select  
(Left) soft key or the  
key.  
3. Highlight Missed calls by pressing the Up or Down Navigation key and  
press the Select (Left) soft key or the key.  
Note: If there is a voicemail sent by the same number, the associated icons display.  
4. Press the Up or Down Navigation key to scroll through the list of missed  
calls.  
5. Press the Left or Right Navigation key to move to another call type.  
Viewing the Details of a Missed Call  
To view the details of a selected missed call, use the following steps:  
1. Press the View soft key. All call types display.  
2. Press the Up or Down Navigation key to scroll through the list of missed  
calls.  
3. Select the missed call and press the Options  
(Left) soft key.  
26  
       
All Calls  
4. Highlight Details by pressing the Up or Down Navigation key and press the  
key.  
Tip: Highlighting the contact name or number and pressing the  
key twice displays the call details.  
Returning a Missed Call  
To return a missed call number, use the following steps:  
1. Press the View soft key. All call types display.  
2. Press the Up or Down Navigation key to scroll through the list of missed  
calls.  
3. Select the missed call and press the Options  
4. Highlight Copy to dialing screen by pressing the Up or Down Navigation  
key and press the key.  
5. Press the key to dial the missed call.  
(Left) soft key.  
Saving a Missed Call to your Phonebook  
To save the missed call entry to your Phonebook, use the following steps:  
1. Press the View soft key. All call types display.  
2. Select the missed call by pressing the Up or Down Navigation key and  
press the Options  
3. Use the navigation keys to highlight Save to phonebook and press the  
Select (Left) soft key or the key.  
4. Highlight the type of information you are saving to the phone, New or  
Update and press the Select (Left) soft key or the key.  
(Left) soft key.  
Sending a Message to a Missed Call  
To send a text message or attachment to a missed call entry, use the following  
steps:  
1. Immediately after missing a call, press the View soft key.  
2. Press the Options  
3. Press the Right navigation key and select Messages then press the  
Select (Left) soft key, or the key.  
4. At the “Message” screen, press Down Navigation key.  
(Left) soft key and select Send Message.  
Call Functions 27  
     
5. Use the Alphanumeric keys to type in a message or press the Options  
(Left) soft key. to also Insert and Add items such as an: Image, Sound,  
or Video.  
6. Press the Send soft key when you are finished.  
Deleting a Missed Call  
To delete a missed call entry, use the following steps:  
1. Immediately after missing a call, press the View soft key.  
2. Press the Options  
3. Press the Right navigation key and select Selected then press the  
Select (Left) soft key, or the key.  
(Left) soft key and select Delete.  
4. At the “Delete?” prompt, press either the Yes soft key to confirm deletion  
or No to cancel.  
Note: You can press the  
key at any time to exit the Missed Call feature.  
Call Time  
1. From the Idle mode, press the Menu  
soft key. Use the navigation keys  
to highlight Call records and press the Select  
(Left) soft key or the  
key.  
2. Highlight All calls by pressing the Up or Down Navigation key then press  
the Select (Left) soft key or the key.  
3. Highlight the desired number or contact name and press the  
key.  
The Call Time displays on the screen.  
Silent Mode  
Silent mode is convenient when you wish to stop the phone from making noise, in a  
theater for example.  
In Idle mode, press and hold the  
on” message appears on screen. The  
key until the phone vibrates, the “Silent Profile  
Silent mode icon displays on the screen.  
In Silent mode, your phone’s speakers are muted. The phone vibrates and lights up  
the external LCD display or just light the external LCD display depending on the  
settings of the Silent Phone Settings feature.  
To exit and reactivate the previous sound settings, press and hold the  
until “Normal Profile on” displays. The Vibrate icon no longer displays.  
key again  
28  
         
Options During a Call  
Options During a Call  
Your phone provides a number of control functions that you can use during a call.  
Adjusting the Call Volume  
During a call, if you want to adjust the earpiece volume, use the Volume keys on the  
left side of the phone.  
Press the  
key to increase the volume level and the key to decrease the level.  
In Idle mode, you can also adjust the ringer volume using these same keys.  
Putting a Call on Hold  
You can place the current call on hold whenever you want. You can also make  
another call while you have a call in progress if your network supports this service.  
To put a call on hold:  
1. While on a call, press the left Options  
(Left) soft key.  
2. Highlight Hold and press the Select  
(Left) soft key. The call is on hold.  
3. You can reactivate the call whenever you want, by pressing the Resume  
soft key.  
To make a call while you have a call in progress:  
1. Place the current call on hold using the previous procedures.  
2. Enter the new phone number that you wish to dial or look it up in the  
Phonebook.  
3. Press the  
key to dial the second call. Once connected, both calls are  
displayed on the screen.  
When you have an active call and a call on hold, you may switch between the two  
calls, changing the one on hold to active and placing the other on hold.  
To switch between the two calls:  
1. Press the left soft key Options.  
2. Highlight Swap and press the Select  
(Left) soft key. The current call  
(#2) is placed on hold and the previous call on hold (#1) is reactivated so  
that you can continue conversing with that person.  
3. Press the  
key to end the currently selected call.  
Call Functions 29  
       
To end a call:  
1. Press the Options (Left) soft key.  
2. Highlight End and press the Select  
3. Highlight the call you wish to end (Active Call, Held Call, or All Calls) and  
press the Select (Left) soft key.  
4. Press the key to end the remaining call.  
(Left) soft key.  
Using the Speakerphone Key  
1. During a call, press the speaker on  
key.  
2. Use the volume keys (located on the left side of your phone) to adjust the  
volume.  
In Call Options  
1. During a call, press the Options  
(Left) soft key to access the following:  
• Mute: Temporarily switches your phone’s microphone off, so the other person  
cannot hear you.  
• Hold: Places the current call on hold.  
• New Call: Places the current call on hold and then allows you to enter and dial  
another number.  
• Phonebook: Accesses your Phonebook information.  
• Save to Phonebook: Saves or updates a contact to the Phonebook.  
• Messages: Creates and sends a new SMS message.  
• Whisper mode on/off: Increases the microphone sensitivity level so that you  
do not have to speak louder to so the other party can hear.  
• Mute keys: Silences/mutes the key tones when on the call. To turn this feature  
off (unmute the keypad), return to this option and select Send keys.  
• Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the contacts  
you selected. These DTMF tones are sent as a group. The DTMF tones are the  
tones used in phones for tone dialling, sounding when you press the number  
keys. This option is helpful for entering a password or an account number when  
you call an automated system, like a banking service.  
• View contact details: Displays contact details for the contact engaged in this  
conversation.  
• Calendar: Temporarily accesses your calendar while still maintaining the current  
call active.  
• Notes: Associates a note with the current phone number.  
• End call: Allows you to end the current call.  
30  
   
Options During a Call  
If you are in a multi-party call, the following options also display.  
• Join: Joins all of the calls you established with your phone (both active and  
on hold).  
• Swap: Places the current call on hold and then activates the previous call.  
• End: Allows you to end the current call.  
2. When you want to finish, end each call normally by pressing the  
key.  
Muting or Sending Key Tones  
These options allow you to turn the key tones off or on. If the Silent Profile option is  
selected, your phone does not transmit the DTMF (Dual Tone Multi-Frequency) tones  
of the keys, which allows you to press keys without hearing annoying key tones  
during a call.  
Note: To communicate with answering machines or computerized telephone systems, the Normal Profile  
option must be selected.  
Switching off the Microphone (Mute)  
You can temporarily switch your phone’s microphone off, so that the other person  
cannot hear you.  
Example: You wish to say something to person in the room, but do not want the person on the phone to  
hear you.  
During a call, to switch the microphone off temporarily:  
1. Press the  
Mute. Unmute displays.  
2. Press the  
Unmute to deactivate the Mute function.  
Searching for a Number in Phonebook  
You can search for a number in Phonebook during a call.  
1. Press the Options  
2. Press the Down key to highlight the Phonebook option.  
3. Press the Select (Left) soft key or the key.  
(Left) soft key.  
4. Highlight the Phonebook entry by using the Up or Down Navigation key.  
-OR-  
5. Enter the first few letters of the contact into the Search field which then  
highlights the closest match in the Phonebook list.  
Call Functions 31  
     
6. To view the highlighted entry, press the  
View soft key.  
For further details about the Phonebook feature, see "Finding a Phonebook Entry"  
Call Waiting  
The Call Waiting feature allows you to answer an incoming call while you have a call  
in progress. If Call Waiting is supported by the network, and you have set the Call  
Waiting Menu to Activate; you are notified of an incoming call by a call waiting  
tone.  
To answer a call while you have a call in progress:  
1. Press the  
key or the Accept soft key to answer the incoming call. The  
first call is automatically put on hold.  
2. To switch between the two calls, press the left Options  
(Left) soft key  
and highlight Swap.  
To end a call on hold:  
1. Press the Options  
(Left) soft key or the  
key  
2. Select the End call option and press the Select  
(Left) soft key or the  
key.  
3. To end the current call, press the  
key.  
Note: Join: Joins all of the calls you established with your phone (both active and on hold).  
Swap: Places the current call on hold and then activates the previous call.  
3-Way Calling (Party Line)  
The 3-Way or Multi-Line feature allows you to answer a series of incoming calls,  
place them on hold, and if this service is supported by the network, and join all of the  
calls together the Call Waiting Menu to Activate. You are notified of an incoming  
call by a call waiting tone.  
To answer a call while you have a call in progress:  
1. Press the  
key or the Accept soft key to answer the first incoming call.  
2. Press the  
key or the Accept soft key to answer the consecutive  
incoming calls. The previous call is then automatically put on hold.  
3. To Join the first two calls, press the left Options  
(Left) soft key and  
highlight Join.  
4. Press the  
key to end the current call.  
32  
 
Changing the Text Input Method  
Section 4: Entering Text  
Topics Covered  
This section outlines how to select the desired text input mode when entering  
characters into your phone. This section also describes how to use the T9 predictive  
text entry system to reduce the amount of key strokes associated with entering text.  
Changing the Text Input Method  
The Text Input option switches the key entry functions from an T9 Alphabet,  
ABC (Alphabet), Numeric Mode, and Symbols Mode.  
T9 Input Method (T9EAb, T9EAB, T9Eab)  
This input method allows you to enter words with only one keystroke per letter. Each  
key on the keypad has more than one letter; for example, pressing the 5 key can  
enter J, K, or L. However, the T9 method automatically compares the series of  
keystrokes you make with an internal linguistic dictionary to determine the most  
likely word, thus requiring far fewer keystrokes than the traditional Alphabet mode.  
The T9 EAb method makes the initial character an uppercase while the remaining  
characters are left as lowercase. The T9 EAB method all characters uppercase. The  
T9 Eab method makes all characters lowercase.  
ABC (Alphabet) Input Method (abc, Abc, ABC)  
This input method allows you to enter letters by pressing the key labeled with the  
letter you want. Press the key once, twice, three, or four times until it displays.  
The abc method makes all characters of the word lowercase. The Abc method  
makes the initial character an uppercase while the remaining characters are left as  
lowercase. The ABC method makes all characters of the word uppercase.  
Entering Text 33  
             
123  
The numeric mode allows you to enter numbers.  
SYM  
The symbols mode allows you to enter symbols, such as punctuation marks.  
The text input mode indicator displays on the screen when you are in a field that  
allows you to enter characters (such as in a text message).  
1. To change the text input mode, press the  
key until the desired text  
input mode displays.  
2. Choose from the following options:  
T9: T9EAb (completed words are initial uppercase), T9EAB (completed  
words are all uppercase) or T9Eab (completed words are all lowercase).  
ABC: abc (all lowercase), Abc (completed words are initial uppercase) and  
ABC (all uppercase).  
Numeric (123): configures the keypad to use only numbers in a text  
message.  
Symbols (SYM): provides an on screen table which allows you to select  
from the list of available symbols associated to each keypad.  
Note: Press and hold the  
key to toggle the T9 and Text modes from initial uppercase to all uppercase  
to all lowercase. Symbol mode: press the number key corresponding to the symbol you want to  
enter. Use the Up and Down Navigation keys to scroll through the available symbols. Press the  
Cancel soft key to exit.  
Using the T9 Input Method  
T9 Predictive Text input method is based on a built-in dictionary.  
Enter a Word in T9 Mode  
1. In T9 method, begin entering a word by pressing the 2 to 9 keys. Press  
each key only once for each letter. The built-in dictionary lists words that  
match the keystrokes you entered.  
2. Example: To enter “Hello”, press  
,
,
,
,
The word that you are typing appears in the display. It may change with  
each key that you press.  
34  
         
Using the Alphabet Input Method  
3. Enter the whole word before editing or deleting the keystrokes.  
4. When the word displays correctly, go to step 5.  
If the word doesn’t display correctly, press the  
key to display  
alternative word choices for the keys that you have pressed.  
Example: Both “Of” and “Me” have the  
choice first.  
and  
keys. The phone displays the most commonly used  
5. Insert a space by pressing the  
key and start entering the next word.  
Adding a New Word into the T9 Dictionary  
1. After pressing the keys corresponding to the word you want to add, press  
the  
key to display the alternative words.  
2. When the last alternative word displays, Spell displays in the lower left  
corner of the screen. Press the Spell soft key.  
3. Enter the word you want to add using the ABC mode.  
4. Press the Add soft key or the  
key.  
The word is added to the T9 dictionary and becomes the first word for the  
associated keypress series.  
Note: This feature may not be available for some languages.  
To enter periods, hyphens, colons, or parenthesis, press the  
key. T9 mode  
applies grammar rules to ensure that correct punctuation is used.  
To shift case in T9 mode, press the  
Capital lock, and Lower case.  
key. There are 3 cases: Initial capital,  
You can move the cursor by using the Left and Right navigation keys. To delete  
letters, press the  
key. Press and hold the  
key to clear the display.  
Using the Alphabet Input Method  
To use the ABC Alphabet input method press the  
to  
keys to enter your text.  
1. Press the key labeled with the letter you want:  
Once for the first letter  
Twice for the second letter, and so on  
2. Select the other letters in the same way.  
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or  
a different letter on the same key, just wait for a few seconds for the cursor to move to the right  
automatically, and then select the next letter.  
Entering Text 35  
   
Keys  
By default, the first letter of an entry is capitalized and all consecutive letters are  
kept in lowercase (unless the Shift key is used). After a character is entered, the  
cursor automatically advances to the next space after two seconds or when you  
enter a character on a different key.  
Characters scroll in the following order (lowercase characters shown in  
parentheses):  
P Q R S Π Σ Ψ 7 p q r s β Σ Ψ 7  
T U V Ü Θ 8 t u v ü ù 8  
. @ , ? ! ‘ - : ) ( ; / _ + & 1  
A B C Ä Å Æ Ç 2 a b c ä à å æ ç 2  
W X Y Z Ξ 9 w x y z Ξ 9  
D E F É ΔΦ 3 d e f è é Φ 3  
G H I Γ 4 g h i ì Γ 4  
0 (inserts space when held)  
Symbol (press and hold to switch  
to Symbol mode)  
J K L Λ 5 j k l Λ 5  
Shift (Toggles Lower/Uppercase)  
M N O Ñ Ö Ø Ω 6 m n o ñ ö ò ø Ω 6  
36  
Using the Numeric Input Method  
Using the Numeric Input Method  
The Numeric mode enables you to enter numbers into a text message. Press the  
keys corresponding to the digits you want to enter.  
Using the Symbols Input Method  
The Symbol input method enables you to insert symbols and punctuation marks into  
text.  
1. To enter symbol mode press the  
key until SYM displays in the lower  
right corner of the display.  
2. Use the Navigation keys to select an on screen symbol group.  
3. To select a symbol from that group, press the corresponding number key.  
4. To clear the symbol(s), press the  
this key returns the display to the previous mode.  
5. To return to your message, press the key.  
key. When the input field is empty,  
Entering Text 37  
       
Section 5: Menu Navigation  
Topics Covered  
This section explains the menu navigation for your phone. It also includes an outline  
of all the available menus associated with your phone.  
Menu Navigation  
Menus and sub-menus can be accessed by scrolling through them using the  
Navigation keys or by using the shortcut keys.  
Accessing a Menu Function by Scrolling  
1. In Idle mode, press the Menu  
soft key to access Menu mode.  
2. Scroll using the Navigation keys to reach a main menu, Settings for  
example. Press the Select  
(Left) soft key or the  
key to enter the  
menu.  
3. If the menu contains sub-menus, Phone settings for example, you can  
access them by first highlighting the option and then by pressing the  
Select  
(Left) soft key or the  
key. If the menu you have selected  
contains further options, repeat this step.  
4. To scroll through these menus, press either the Up or Down Navigation key  
or the Volume key (located on the left side of your phone). Press the  
Select  
5. To return to the previous menu level, press the Back soft key, the  
6. To exit the menu without changing the settings, press the key.  
(Left) soft key, or the  
key to make your selection.  
key.  
38  
       
Menu Outline  
Using Shortcuts  
Numbered menu items, such as menus, sub-menus, and options can be quickly  
accessed by using their shortcut numbers. In Menu mode, Main Menus can be  
accessed by pressing the number keys (1 to 0) corresponding to their location on the  
screen.  
Example: Accessing the Language menu.  
1. Press the Menu  
soft key.  
2. Press the  
3. Press the  
4. Press the  
5. Press the  
key for Settings.  
key for Phone settings.  
key for Language.  
key to display the list of available languages.  
Menu Outline  
The following list shows the menu structure and indicates the number assigned to  
each option.  
1: Voice notes  
2: Call records  
2.1: All calls  
2.2: Missed calls  
2.3: Incoming calls  
2.4: Outgoing calls  
2.5: Voice mail  
2.6: Speed dial  
2.7: Delete all  
2.8: Call time  
3: t-zones  
3.1: Go to homepage  
3.2: Enter URL  
3.3: Bookmarks  
3.4: Saved pages  
3.5: History  
3.6: Advanced  
3.6.1: Clear cache  
Menu Navigation 39  
     
3.6.2: Empty cookies  
3.6.3: Cookie options  
3.6.4: Preferences  
3.6.5: About browser  
4: IM  
4.1: Sign on  
4.2: Saved conversations  
4.3: Offline conversations  
4.4: Settings  
4.4.1: Choose your community  
4.4.2: Community settings**  
4.5: Help  
4.5.1: Service provider info  
4.5.2: Help text  
4.5.2.1: Sign up  
4.5.2.2: Sign on  
4.5.2.3: Buddies  
4.5.2.4: Sending IMs  
4.5.2.5: Receiving IMs  
4.5.2.6: Privacy  
4.5.2.7: Away  
5: Messages  
5.1: Create new  
5.1.1: Message  
5.1.2: Share picture  
5.1.3: Voice note  
5.2: Inbox  
5.3: Sentbox  
5.4: Outbox  
5.5: Drafts  
5.6: My folders  
5.7: Templates  
5.7.1: Text templates  
5.7.2: Picture message templates  
5.8: Delete all  
40  
Menu Outline  
5.9: Messages settings  
5.9.1: Text message  
5.9.1.1: Common settings  
5.9.1.2: Text message center settings  
5.9.2: Picture message  
5.9.2.1: Sending options  
5.9.2.2: Receiving options  
5.9.2.3: Auto resize image  
5.9.2.4: Creation mode  
5.9.2.5: Default style  
5.9.3: Broadcast message*  
5.9.4: Voice mail  
5.9.5: Push message  
5.9.5.1: Receiving option  
5.9.5.2: Service loading  
5.0: Memory status  
6: Fun & Apps  
6.1: Media player  
6.2: Camera  
6.3: Sounds  
6.4: Images  
6.5: Videos  
6.6: Music  
6.7: Games  
6.8: Other files  
6.9: Memory status  
7: Help  
8: Organizer  
8.1: Alarm  
8.1.1: Wake-up alarm  
8.1.2: Alarm 1  
8.1.3: Alarm 2  
8.1.4: Alarm 3  
8.1.5: Alarm 4  
8.1.6: Auto power-up  
Menu Navigation 41  
8.2: Calendar  
8.3: Tasks  
8.4: Notes  
8.5: Calculator  
8.6: Tip calculator  
8.7: World time  
8.8: Sychronization  
8.8.1: Sync now  
8.8.2: View log  
8.8.3: Sync Settings  
8.8.4: About sync  
8.9: Unit conversion  
8.9.1: Currency  
8.9.2: Length  
8.9.3: Weight  
8.9.4: Volume  
8.9.5: Area  
8.9.6: Temperature  
8.0: Timer  
8.*: Stopwatch  
9: Settings  
9.1: Sound Profiles  
9.2: Display settings  
9.2.1: Main display  
9.2.1.1: Wallpaper  
9.2.1.2: Greeting message  
9.2.1.3: Main menu style  
9.2.1.4: Pop up list menu  
9.2.1.5: Dialing display  
9.2.1.5.1: Font type  
9.2.1.5.2: Font size  
9.2.1.5.3: Font color  
9.2.1.5.4: Background color  
9.2.2: Front display  
9.2.2.1: Greeting message  
42  
Menu Outline  
9.2.2.2: Font color  
9.2.3: Light settings  
9.2.3.1: Brightness  
9.2.3.2: Backlight time  
9.2.3.3: Keypad light  
9.3: Shortcut key  
9.4: Time & date  
9.5: Phone settings  
9.5.1: Language  
9.5.2: Own number  
9.5.2.1: Default number  
9.6: Call settings  
9.6.1: All calls  
9.6.1.1: Show my number  
9.6.1.2: Auto Block  
9.6.1.3: Answering mode  
9.6.1.4: Show caller ID  
9.6.1.5: Call status tones  
9.6.1.6: Alerts on call  
9.6.2: Voice call  
9.6.2.1: Call forwarding  
9.6.2.2: Call barring  
9.6.2.3: Call waiting  
9.6.2.4: Auto redial  
9.7: Connectivity  
9.7.1: Bluetooth  
9.7.1.1: Turn Bluetooth On/Off  
9.7.1.2: My devices  
9.7.1.3: My visibility  
9.7.1.4: My phone name  
9.7.1.5: Security modes  
9.7.1.6: Features  
9.7.1.6.1: Headset  
9.7.1.6.2: Handsfree  
9.7.1.6.3: Bluetooth stereo headset  
9.7.1.6.4: Serial port  
9.7.1.6.5: Dial up  
Menu Navigation 43  
9.7.1.6.6: Basic printing  
9.7.1.6.7: File transfer  
9.7.1.6.8: Object push  
9.7.1.7: Help  
9.7.2: Network selection  
9.7.2.1: Search now  
9.7.2.2: Default setup  
9.8: Synchronization  
9.8.1: Sync now  
9.8.2: View log  
9.8.3: Sync settings  
9.8.4: About sync  
9.9: Application settings  
9.9.1: Messages settings  
9.9.1.1: Text message  
9.9.1.1.1: Common settings  
9.9.1.1.2: Text message center settings  
9.9.1.2: Picture message  
9.9.1.2.1: Sending options  
9.9.1.2.2: Receiving options  
9.9.1.2.3: Auto resize image  
9.9.1.2.4: Creation mode  
9.9.1.2.5: Default style  
9.9.1.3: Broadcast message*  
9.9.1.4: Voice mail  
9.9.1.5: Push message  
9.9.1.5.1: Receiving option  
9.9.1.5.2: Service loading  
9.9.2: Camera settings  
9.9.3: Camcorder settings  
9.9.4: Media player settings  
9.9.5: Calendar settings  
9.9.5.1: Starting day  
9.9.5.2: Default view mode  
9.9.6: Phonebook management  
9.9.6.1: Speed dial  
44  
Menu Outline  
9.9.6.2: Save new contacts to  
9.9.6.3: View contacts from  
9.9.6.4: Own number  
9.9.6.5: Service number  
9.9.6.6: Memory status  
9.0: Security  
9.0.1: Phone lock  
9.0.2: PIN lock  
9.0.3: Lock applications  
9.0.4: FDN mode  
9.0.5: Change phone password  
9.0.6: Change PIN code  
9.0.7: Change PIN2 code  
9.*: Software Update  
9.0.1: Continue Update  
9.#: Reset settings  
9.13: Memory settings  
9.0.13.1: Clear memory  
9.0.13.2: Memory status  
* Displays only if supported by your SIM card.  
**The IM menu settings determine your Default Community Setting  
Menu Navigation 45  
Section 6: Understanding Your Phonebook  
Topics Covered  
This section allows you to manage your daily contacts by storing their name and  
number in your Phonebook. Phonebook entries can be sorted by name, entry, or  
group.  
Note: When storing an Phonebook entry into your SIM card, note that only the Name, Address, and slot  
location are saved. To save additional information for a particular contact, such as notes, e-mail,  
dates, etc.., it is important to save that Contact into your phone’s onboard memory.  
Using Contacts List  
Dialing a Number from Phonebook  
Once you have stored phone numbers in the Phonebook, you can dial them easily  
and quickly by either using their SIM card location number or by using the Search  
field to locate the entry.  
Finding a Phonebook Entry  
You can store phone numbers and their corresponding names onto your SIM card  
and phone’s onboard memory. They are physically separate but are used as a single  
entity, called the Phonebook.  
Depending on your particular SIM card, the maximum number of phone numbers the  
SIM card can store may differ.  
46  
             
Phonebook Entry Options  
1. When the Idle mode displays, press the Phonebook (Right) soft key.  
2. Enter the first few letters of the name in the Contacts field.  
The Phonebook entries are then listed, starting with the first entry  
matching your input.  
3. To select a different entry, press the Up or Down Navigation key until the  
entry you want is highlighted.  
4. Once you locate the entry, press the  
key to dial the number, or press  
the Options (Left) soft key to access the Phonebook entry options.  
Phonebook Entry Options  
While accessing any Phonebook entry, press the Options  
(Left) soft key to use  
the options for the entry.  
The following options are available:  
• Add new contact: adds a new entry to either your Phone or SIM card.  
• View: provides you with details about that contact entry. Press the Back (Right)  
soft key to return to the Phoenbook listing.  
• Call: dials the selected phone number.  
• Send message: sends a message, shares a picture, or sends a Voice note to  
the selected entry.  
• Edit: edits the properties of an entry such as: Name, Category, Group, or  
location. Press the  
key to save your changes.  
• Delete: deletes either a selected Phonebook entry or multiple entries from a  
target location such as the Phone and/or SIM card.  
• Send name card via: sends your name card attached to a message or to a  
Bluetooth enabled device.  
• My name card: maintains your content information (such as name, phone  
number(s), Caller ID, etc.)  
• Assign speed dial: sets the speed dial key for this entry.  
• Copy to Phone/SIM: copies the selected contact information or multiple  
contacts’ information from the SIM to the phone or from your phone to your SIM.  
• Move to Phone/SIM: moves the selected contact information or multiple  
contacts’ information from the SIM to the phone or from your phone to your SIM.  
Understanding Your Phonebook 47  
 
• FDN Contacts: Fixed Dialling Number mode restricts your outgoing calls  
and SMS calls to a limited set of phone numbers. When this feature is  
enabled, you can make calls only to phone numbers stored on the SIM  
FDN list.  
• Print via Bluetooth: sends the selected contact entry information to a  
Bluetooth compatible printer.  
Management: manages the following:  
- Speed dial  
- Save new contacts to  
- View contacts from  
- Own number  
- Service number  
- Memory status  
Adding a New Contact  
Use the following procedures to store a new contact to your Phone or SIM Card.  
Storing a Number in the Phone’s Memory  
The default storage location for saving phone numbers to your phonebook is your  
phone’s built-in memory. You can also save your numbers to your SIM card or setup  
a default location so that whenever a new phonebook entry is created, you are  
prompted to choose between Phone or SIM card. For information on how to change  
your SIM card can be copied later to your phone’s memory.  
1. When the Idle mode displays, enter the phone number.  
2. Press the Options  
3. Scroll to Save to Phonebook by pressing the Up or Down navigation key  
then press Select (Left) soft key or the key.  
4. Select the type (New or Update) and press the Select  
the key.  
(Left) soft key.  
(Left) soft key or  
5. From the Select type screen, select from the following category types:  
• Mobile - private: assigns the number entered as a Private Mobile entry.  
• Mobile - business: assigns the number entered as a Business Mobile entry.  
• Landline - private: assigns the number entered as a Private Landline entry.  
• Landline - business: assigns the number entered as a Business Landline  
entry.  
• Fax: assigns the number entered as a Fax entry.  
• Etc.: classifies the entry as a miscellaneous type.  
6. Enter the desired information and press the Options  
(Left) soft key.  
48  
       
Adding a New Contact  
7. Enter alphanumeric characters into each of the available fields:  
• First name: enters a first name for this entry.  
• Last name: enters a Last name for this entry.  
• Display name: enters a display name for this entry which then appears when  
you receive a call from this contact.  
• Phone Number: maintains or alters the currently entered phone number.  
• Number Type: enters an additional landline-private number to this entry.  
• Contact E-mail: enters a contact E-mail address for this entry.  
• Group: assigns this contact to group. Press the  
groups. Use the Up or Down Navigation keys to select a group. Press the  
Select (Right) soft key or the key to save your selection.  
• Caller ID: sets a graphic to the Caller ID for this contact. Press the Options  
(Left) soft key or the key to access the Fun & Apps menu.  
• Ringtone: chooses a ringtone for this contact information. Press the Options  
(Left) soft key or the key to access the Fun & Apps menu.  
key to display available  
• Instant Messaging: allows you to create an instant message.  
• Notes: Associates a note with the current phone number. Press the Options  
(Left) soft key, highlight Save or press the  
key to save the information  
for this entry.  
8. Press the Options soft key or the  
this entry.  
key to save the information for  
Storing a Number in the SIM Card  
Note: When storing an Phonebook entry into your SIM card, note that only the Name, Address, and slot  
location are saved. To save additional information for a particular contact, such as notes, e-mail,  
dates, etc.., it is important to save that Contact into your phone’s onboard memory.  
1. When the Idle mode displays, enter the phone number.  
2. Press the Options  
3. Scroll to Save to Phonebook by pressing the Up or Down navigation key  
then press Select (Left) soft key or the key.  
4. Select the type (New or Update) and press the Select  
the key.  
(Left) soft key.  
(Left) soft key or  
Understanding Your Phonebook 49  
 
5. From the Select type screen, select one of the following category types to  
associate with the phone number you entered:  
• Mobile - private: assigns the number entered as a Private Mobile entry.  
• Mobile - business: assigns the number entered as a Business Mobile entry.  
• Landline - private: assigns the number entered as a Private Landline entry.  
• Landline - business: assigns the number entered as a Business Landline  
entry.  
• Fax: assigns the number entered as a Fax entry.  
• Etc.: classifies the entry as a miscellaneous type.  
6. Enter the desired information and press the Options  
(Left) soft key.  
7. Select Save and press the Select  
(Left) soft key or the key.  
The information saves by default to the Phone’s memory.  
8. Highlight the newly created contact and press the Options  
(Left)  
soft key.  
9. Select Copy to SIM and press the Select  
(Left) soft key or the  
key.  
10. Press the  
key to return to the Idle mode.  
Dialing a Number from the SIM Card using the  
Location Number  
1. In Idle mode, enter the location number for the phone number you want to  
dial and press the key.  
The contact entry information displays.  
Note: If you cannot remember a location number, you must go into the Contact list menu in the Phonebook  
2. Press the Up or Down Navigation key to find other numbers on the list.  
3. Select the contact entry from the list and press the Call  
Note: The location number is the three-digit entry displayed on the screen.  
Managing Phonebook Entries  
(Left) soft key.  
You can copy, delete, and view the memory status for the Phone and SIM entries on  
your phone.  
50  
     
Synchronizing your Phonebook  
Default Saving  
The Save new contacts to option allows you to choose where your contacts are  
saved. The following options are available:  
• Phone memory: new phonebook contacts are saved to your phone. Your  
phone comes with the default set to Phone memory.  
• SIM memory: new phonebook contacts are saved to your SIM card.  
• Always ask: you are prompted to choose between Phone or SIM Card  
whenever you save a new contact.  
Default Viewing  
The View contacts from option allows you to choose where your contacts are  
viewed. The following options are available:  
• All: displays all the contacts stored in both the phone’s and SIM’s memory.  
• Phone memory: new phonebook contacts are automatically saved and viewed  
from the Phone memory.  
• SIM memory: new phonebook contacts are viewed from the SIM card.  
Synchronizing your Phonebook  
This feature allows you to back up (synchronize) your Phonebook information stored  
on your handset with your T-Mobile account on the network.  
Phonebook is wirelessly synchronized on your device using Microsoft Exchange  
Server and PC Studio.  
To synchronize your Phonebook with the TMobile network:  
1. In Idle mode, press the Menu  
2. Select Organizer and press the Select  
3. Highlight Synchronization by pressing the Up or Down Navigation key  
(Left) soft key.  
(Left) soft key or the  
key.  
and press the Select  
(Left) soft key or the  
key.  
4. Highlight Sync Settings and press the Select  
(Left) soft key or the  
key.  
5. Highlight Contacts and press the  
key to place a check mark next to  
the Contacts selection.  
6. Press the Save soft key.  
The PIM sync screen redisplays.  
Understanding Your Phonebook 51  
   
7. Select the Sync now option and press the Select  
(Left) soft key or the  
key.  
8. When the “Synchronization will start” message displays, press the  
Continue soft key.  
9. Press the  
key to return to the Idle mode.  
My name card  
My Name Card allows you to create a virtual business card. Once completed, you  
can send the card to recipients as a V-card attachment.  
1. In Idle mode, press the Phonebook (Right) soft key.  
2. Press the Options (Left) soft key, scroll to My name card by pressing the  
Up or Down Navigation key and press the Select  
(Left) soft key or the  
key.  
3. Enter information in each of the fields as desired. Use the navigation key to  
move between fields, then use the keypad to enter information.  
4. Press the  
key to save.  
5. Press the  
key to return to the Idle mode.  
Sending a name card  
This feature allows you to send a message to the selected entry which contains  
Phonebook entry information. This is sent as either a message or via Bluetooth.  
Sending via Message  
1. In Idle mode, press the Phonebook (Right) soft key.  
2. Press the Options  
3. Press the Right navigation key and select Message then press the  
Select (Left) soft key or the key.  
(Left) soft key and select Send name card via.  
4. Enter the Contact phone number in the text field and press the Down  
navigation key.  
The cursor blinks inside the blank text field.  
5. Type your message and then press the Send  
6. Press the key to return to the Idle mode.  
Sending via Bluetooth  
1. In Idle mode, press the Phonebook (Right) soft key.  
soft key.  
2. Press the Options  
(Left) soft key and select Send name card via.  
3. Press the Right navigation key and select Bluetooth then press the  
Select  
(Left) soft key or the  
key.  
52  
 
Speed Dial  
4. Highlight Selected or Multiple by pressing the Up or Down navigation key  
to indicate who receives this message and press the Select  
key or the key.  
(Left) soft  
The handset searches and locates the available Bluetooth devices.  
5. Select the device type from the list by pressing the Up and Down  
navigation key then press the Select  
6. Press the key to return to the Idle mode.  
Speed Dial  
(Left) soft key or the  
key.  
Once you have stored phone numbers from your Phonebook list, you can set up to  
8-speed dial entries and then dial them easily whenever you want, simply by  
pressing the associated numeric key.  
In Idle mode, press and hold key (2-9) to speed dial the phone number  
assigned to this key.  
Setting Up Speed Dial Entries  
1. When the Idle mode displays, press the Phonebook (Right) soft key.  
2. Press the Options  
the Select  
(Left) soft key and select Management and press  
(Left) soft key or the  
key.  
3. Highlight Speed dial and press the Select  
(Left) soft key or the  
key.  
4. Select the key in which you wish to assign the speed-dialing number (from  
the 2 to 9 keys), and press the Options  
(Left) soft key, highlight Add  
and press the Right navigation key.  
5. Select Contacts or FDN contacts and press the Select  
or the key.  
6. Select a contact from the list and press the Select  
the key.  
(Left) soft key  
(Left) soft key or  
Note: Memory location 1 is reserved for your Voice mail server number.  
Changing a Number Assigned to a Key  
1. When the Idle mode displays, press the Phonebook (Right) soft key.  
2. Press the Options  
the Select  
(Left) soft key and select Management and press  
(Left) soft key or the  
key.  
3. Highlight Speed dial and press the Select  
(Left) soft key or the  
key.  
Understanding Your Phonebook 53  
   
4. Select the key in which you wish to reassign the speed-dialing number  
(from the 2 to 9 keys), and press the Options  
(Left) soft key, highlight  
Change and press the Right navigation key.  
5. Select Contacts or FDN contacts and press the Select  
or the key.  
6. Select a contact from the list and press the Select  
the key.  
(Left) soft key  
(Left) soft key or  
7. After the Change speed dial? screen appears, press the Yes soft key to  
save the new speed dial entry and overwrite the previous information.  
8. Press the  
key to return to Idle mode.  
Deleting Speed Dial Entries  
1. When the Idle mode displays, press the Phonebook (Right) soft key.  
2. Press the Options  
the Select  
(Left) soft key and select Management and press  
(Left) soft key or the  
key.  
3. Highlight Speed dial and press the Select  
(Left) soft key or the  
key.  
4. Select the key in which you wish to delete the speed-dialing number (from  
the 2 to 9 keys), and press the Options  
Remove and press the Select  
(Left) soft key, highlight  
key.  
(Left) soft key or the  
5. At the “Remove?” screen appears, press the Yes soft key to delete the  
speed dial entry.  
6. Press the  
key to return to Idle mode.  
FDN Mode  
FDN (Fixed Dialing Number) mode, if supported by your SIM card, restricts your  
outgoing calls and messages to a limited set of phone numbers. When this feature is  
enabled, you can make calls only to phone numbers stored in the FDN list on the SIM  
card.  
The following options are available:  
• Off: you can call any number.  
• On: you can only call the phone numbers stored in the SIM FDN list.  
You must enter your PIN2 password.  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.  
54  
   
FDN Mode  
Copying an Entry to the Phone  
You can copy a SIM entry to the Phone by using the Duplicate option. When you copy  
entries to the phone, duplicate entries are created.  
1. When the Idle mode displays, press the Phonebook (Right) soft key.  
2. Select an entry which currently resides on the phone.  
If the entry’s associated Group graphic has a SIM location icon on it, then the  
entry already exists on the SIM card. This is the type you can duplicate.  
If the entry’s associated Group image does not have a SIM location icon, then  
this entry currently also exists on the phone.  
3. Press the Options  
the Right navigation key to select Selected then press the Select  
(Left) soft key or the key.  
4. Press the key to return to Idle mode.  
(Left) soft key, highlight Copy to phone, and press  
Note: Options are available for phone entries that are not available when stored to the SIM card. For details  
Copying an Entry to the SIM  
You can copy a Phone entry to the SIM by using the Duplicate option. When you copy  
entries to the phone, duplicate entries are created.  
1. When the Idle mode displays, press the Phonebook (Right) soft key.  
2. Select an entry which currently resides on the phone.  
If the entry’s associated Group graphic has a SIM location icon on it, then the  
entry already exists on the SIM card.  
If the entry’s associated Group image does not have a SIM location icon, then  
this entry currently exists on the phone.  
3. Press the Options  
(Left) soft key, highlight Copy to SIM, and press the  
(Left)  
Right navigation key to select Selected then press the Select  
soft key or the  
4. Press the  
key.  
key to return to Idle mode.  
Deleting All of the Phonebook Entries  
You can delete All, Phone, SIM, and SIM (FDN) entries from your phone’s memory.  
1. When the Idle mode displays, press the Phonebook (Right) soft key.  
2. Press the Options  
(Left) soft key, highlight Delete, and press the  
Right navigation key.  
Understanding Your Phonebook 55  
   
3. Highlight Multiple, by pressing the Up or Down navigation key and press  
the Select (Left) soft key or the key.  
4. Choose the location of the Phonebook entries you wish to delete (Phone,  
SIM, or Phone & SIM), press the Select  
(Left) soft key or the  
key.  
5. Highlight Phone & SIM and press the  
key.  
A checkmark displays adjacent to every entry in the list. You can remove  
the check mark by pressing the key again.  
6. Press the Delete soft key to delete the entries from the selected memory  
location.  
7. At the Delete? confirm screen, press the Yes soft key to continue, or the  
No soft key to cancel.  
8. Enter the password and press the Confirm soft key or the  
9. Press the key to return to Idle mode.  
Checking the Memory Status  
key.  
You can check how many names and numbers are stored in the Phonebook, in both  
SIM card and the phone memory. You can also see the capacity of both memories.  
1. When the Idle mode displays, press the Phonebook (Right) soft key.  
2. Press the Options  
(Left) soft key.  
3. Highlight Management and press the Select  
(Left) soft key or the  
key.  
4. Scroll to Memory status by pressing the Up or Down Navigation key and  
press the Select (Left) soft key or the key.  
The Phone, SIM and FDN status displays.  
5. Press the  
key to return to Idle mode.  
Using the Service Dialing Numbers  
You can view the list of Service Dialing Numbers (SDN) assigned by your service  
provider. These numbers include emergency numbers, customer service numbers  
and directory inquiries.  
1. When the Idle mode displays, press the Phonebook (Right) soft key.  
2. Press the Options  
the key.  
(Left) soft key, highlight Management, and press  
56  
   
FDN Mode  
3. Scroll to Service number by pressing the Up or Down Navigation key and  
press the  
key.  
The available service numbers are listed on the Service number display  
screen.  
4. Scroll through the numbers by using the Up or Down Navigation key.  
5. To dial the number displayed, press the  
6. Press the key to return to Idle mode.  
key.  
Note: This menu is available only when your SIM card supports Service Dialing Numbers.  
Understanding Your Phonebook 57  
Section 7: t-zones  
Topics Covered  
Your phone is equipped with a WAP (Wireless Application Protocol) browser which  
allows you to access the Internet. This section explains how to access the WAP  
services of your service provider and navigate the WAP browser.  
Accessing the t-zones Homepage  
1. In Idle mode, press the  
key to launch the WAP browser.  
-OR-  
Press the Menu  
(Left) soft key to access menu mode, highlight  
t-zones and press the Select  
(Left) soft key or the  
key.  
2. Select Go to Homepage and press the Select  
(Left) soft key or the  
key. Your phone connects to the network and loads the Internet  
homepage. The content of the start-up homepage contains the following  
selections:  
• Search: enters a test string into the field and then searches the t-zones  
database for matches. Once you enter a word, press the Right  
Navigation key to select the Search button and press the  
begin your search.  
key to  
• My Account: provides access to a listing of your most recent purchases  
and available product (services). From the My Account screen, highlight  
Current Activity and press the  
key to begin.  
58  
   
Accessing the t-zones Homepage  
• Hot picks: provides a list of the most popular web page topics.  
Highlight a link from the list and press the  
web page.  
key to navigate to that  
• Music & Sounds: provides a list of HiFi Ringers®, MegaTones®,  
CallerTunes®, Voices & Sounds, Promotions, and information about  
Music & Sounds as well as Subscription information. Highlight a link  
from the list and press the  
key to navigate to that web page.  
• Games: (your plan must include the T-Mobile game download service  
for this option to be active.)  
Note: Prior to using this service you must agree to the terms of the service agreement and setup the service  
on your handset at http://www.t-mobile.com/plans.  
• Wallpaper: provides a link to download images to use for wallpaper on  
your phone’s screen. You can also choose STylePaperTM, a selection of  
wallpaper that you can customize by adding your name or other text.  
Highlight a link from the list and press the  
web page.  
key to navigate to that  
• Messaging: offers a list of messaging plans to purchase. The  
messaging center allows you to access a variety of web-based  
messaging services and applications. Highlight a service from the list  
and press the  
key to begin using the service.  
Note: Prior to using this service you must agree to the terms of the service agreement and setup the  
service on your handset at http://www.t-mobile.com/plans.  
• Web & Applications: displays a list of T-MobileWeb, My Album and  
Applications to purchase. Highlight a service from the list and press the  
key to begin using the service.  
• 411 & More: displays a selectable list of services (such as Person  
Lookup, Business Lookup, Movie Times, Sport Scores, Weather, and  
Horoscope) that, when selected, connects you to a live 411 operator.  
3. To scroll through the screen, use the Up and Down Navigation keys.  
4. Press the  
key to exit the browser at any time.  
t-zones 59  
Entering a URL  
There are several ways to access a WAP site:  
Selecting a link on the browser  
Entering a URL address manually; use the Go to URL option on the browser menu  
list.  
Using Bookmarks  
While navigating through either the Internet or the t-zones pages, you can bookmark  
a site to quickly and easily access it at a future time. The URL addresses of the  
bookmarked sites are stored in the Favorites folder, where you can either use the  
6-preset URL addresses and store your own favorite URL addresses.  
Accessing a WAP Site Using Bookmarks  
1. When the Idle mode displays, press the Menu  
soft key.  
2. Highlight t-zones and press the Select  
(Left) soft key or the  
(Left) soft key.  
key.  
key.  
3. Select Bookmarks and press the Select  
4. Highlight a bookmark item on the Bookmark list.  
5. Press the Options  
(Left) soft key to select Go to or press the  
Storing a URL Address as a Bookmark  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
2. Select t-zones and press the Select  
(Left) soft key or the  
(Left) soft key.  
key.  
3. Select Bookmarks and press the Select  
4. Press the Options (Left) soft key, highlight Enter URL and press the  
Select (Left) soft key or the key.  
5. Enter the URL address and press the Down Navigation key to highlight the  
Add bookmark checkbox.  
Tip: Use can use the  
@
key to cycle through available symbols and choose the . (period) and  
the (at) needed for most website addresses.  
6. Press the  
key to display a check mark in the Add bookmark checkbox  
and press the Go to soft key.  
7. Press the  
key to return to Idle mode.  
60  
   
Saved pages  
Editing Bookmarks  
1. From the Bookmarks list, select the bookmark you want to change.  
2. Press the Options  
the Select  
(Left) soft key. Highlight Edit bookmark and press  
(Left) soft key or the  
key.  
3. Change the address and the name, as you would when storing a new one.  
4. Press the Save soft key.  
5. Press the  
key to return to Idle mode.  
Deleting Bookmarks  
1. From the Bookmarks list, select the bookmark you want to delete.  
2. Press Options  
(Left) soft key. Highlight Delete and press the Right  
Navigation key.  
3. Highlight Selected and press the Select  
(Left) soft key or the  
key.  
4. At the Delete? prompt press the Yes soft key to confirm the deletion.  
5. Press the  
key to return to Idle mode.  
Saved pages  
This option displays a list of the pages that were saved while navigating the browser.  
Using your History  
The History list provides you with a list of the most recently visited web sites. These  
entries can be used to return to previously unmarked web pages.  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
2. Highlight t-zones and press the Select  
(Left) soft key or the  
(Left) soft key or the  
key.  
key.  
3. Highlight History and press the Select  
4. Use the Up or Down Navigation key to highlight an entry from the list.  
5. Press the Options (Left) soft key. Highlight Go to and press the Select  
(Left) soft key or the key.  
6. Press the key to exit from the browser.  
Clearing the Cache  
The cache is the phone’s temporary memory in which the most recently accessed  
web pages are stored. You can clear the cache at anytime.  
1. When the Idle mode displays, press the Menu  
soft key.  
2. Highlight t-zones and press the Select (Left) soft key or the  
key.  
t-zones 61  
         
3. Highlight Advanced and press the Select  
(Left) soft key or the  
(Left) soft key or the  
key.  
4. Select Clear Cache and press the Select  
key.  
5. Press the Yes soft key or the  
key to confirm the deletion.  
6. Press the  
key to return to Idle mode.  
Clearing the Cookies  
A cookie is a small file which is placed on your phone by a web site during  
navigation. In addition to containing some site-specific information, it can also  
contain some personal information (such as a username and password) which can  
pose a security risk if not properly managed. You can clear this cookies from your  
phone at any time.  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
2. Highlight t-zones and press the Select  
(Left) soft key or the  
(Left) soft key or the  
key.  
3. Highlight Advanced and press the Select  
key.  
4. Select Empty cookies and press the Select  
(Left) soft key or the  
key.  
5. Press the Yes soft key or the  
key to confirm the deletion.  
6. Press the  
key to return to Idle mode.  
Cookie Options  
This option determines whether you Accept or Reject all cookies placed on your  
phone during web site navigation. You can also select the option to Prompt you to  
accept or reject cookies each time you navigate the web.  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
2. Highlight t-zones and press the Select  
(Left) soft key or the  
(Left) soft key or the  
key.  
3. Highlight Advanced and press the Select  
key.  
4. Select Cookie options and press the Select  
(Left) soft key or the  
key.  
5. Highlight Accept all, Reject all or Prompt and press the Select  
(Left) soft key.  
6. Press the  
key to return to Idle mode.  
62  
 
Preferences  
Preferences  
This option changes the settings for the web browser to suit your preferences.  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
2. Highlight t-zones and press the Select  
(Left) soft key or the  
(Left) soft key or the  
key.  
3. Highlight Advanced and press the Select  
key.  
4. Select Preferences and press the Select  
(Left) soft key or the  
key.  
5. Select from the following options:  
Run JavaScript  
Display images  
Play sound  
6. Press the  
key to return to Idle mode.  
About browser  
Navigating with the WAP Browser  
1. To scroll through browser items, press the Up or Down Navigation keys.  
2. To select a browser item, highlight a NetFront entry and press the key  
or press the Options (Left) soft key and choose Select.  
3. To return to the previous page, press the key, or press the  
Options (Left) soft key and choose Back.  
4. To access the browser menu list, press the Menu  
(Left) soft key.  
(Left) soft key  
5. To return to the start-up homepage, press the Menu  
and select the Home option.  
Entering Text in the WAP Browser  
When you are prompted to enter text, the currently active text input mode is  
indicated on the screen. To change the text input mode, press the  
more times.  
key one or  
The following modes are available:  
• Upper-Case Alphabet Mode (ABC): allows you to enter upper-case  
characters.  
• Lower-Case Alphabet Mode (abc): allows you to enter lower-case  
characters.  
t-zones 63  
   
Note: You can enter symbols in upper or lower case alphabet mode by pressing the  
key.  
T9 Mode (T9): allows you to enter characters by pressing one key per letter. In this  
mode, you can use only the 0 key to display alternative words. To change case,  
press the * key.  
Number Mode (123): allows you to enter numbers.  
Symbol Mode (Sym): allows you to enter symbols.  
Selecting and Using Menu Options  
Various menus are available when you are using the WAP Browser to navigate the  
Wireless Web.  
To access a menu option, press the Menu  
(Left) soft key. A menu list displays.  
Note: The menus may vary, depending on your version of the WAP Browser.  
The following options are available:  
Go: navigates Forward (next sequenced web page) or Backward (to the previously  
visited web page) through pages in your browsing history.  
Reload: reloads the current page with updated information.  
Desktop view: changes the display mode of the browser.  
Page size: changes the page size of the displayed web page (Large, Normal, or Small).  
Go to homepage: takes you back at any time to the homepage of the Wireless  
Web service provider.  
Add to Bookmarks: bookmarks the current page and marks it as a favorite site.  
View bookmarks: accesses and displays the bookmarks assigned as favorite web  
pages.  
Send URL: send the URL of the current page via either a message or to another  
party via a Bluetooth device.  
Enter URL: allows you to manually enter the URL address of a WAP site. After  
entering an address, press the OK soft key to go there directly.  
Copy URL: send the URL of the current page to another party as an attachment to  
a message.  
Save: saves either the image of the current web page or the current page itself.  
Saved Pages: access the list of web pages you have saved.  
History: displays the list of web pages you have recently accessed.  
64  
 
About browser  
Advanced: allows you to change the following settings for the browser.  
Clear Cache: deletes the information stored in the cache. The cache stores the  
most recently accessed pages.  
Empty Cookies: delete cookies. Cookies are pieces of personal information sent to  
a web server while navigating the web.  
Cookie Options: sets whether or not cookies are stored on your phone. If you  
select Prompt, the phone will ask you to save the cookies on every page requiring  
cookies.  
Preferences: changes the settings for the web browser to suit your preference.  
Certificates: accesses certificate information from your phone.  
Page Details: displays the properties for the currently active web page.  
About Browser: displays the access version and copyright information about the  
browser.  
t-zones 65  
Section 8: Messages  
Topics Covered  
This section describes how to send or receive different types of messages. It also  
includes the features and functionality associated with messages.  
Types of Messages  
Your phone provides the following message types:  
Text messages  
Picture messages  
Voicemail  
Push message  
Voice notes  
IM messages  
66  
       
Creating and Sending New Messages  
Creating and Sending New Messages  
Text Messages  
The Short Message Service (SMS) allows you to send and receive short text  
messages to and from other mobile phones. To use this feature, you must subscribe  
to your service provider’s message service.  
The Message icon ( ) displays when you receive new text messages. When the  
memory is full, an error message displays and you cannot receive any new  
messages. Use the Delete option in each message box to delete obsolete messages.  
1. When the Idle mode displays, press the Menu  
2. Select Messages and press the Select (Left) soft key or the  
3. Using the Up or Down Navigation key, highlight Create new and press the  
Select (Left) soft key or the key.  
4. Select Message and press the Select  
(Left) soft key.  
key.  
(Left) soft key or the  
key.  
5. Enter a phone number in the contact field and press the Down navigation  
key to access the text field and begin creating your text message.  
Save as Template  
This options saves the current text message to the current list of preset message  
templates, such as (Out of Office, I’m in a meeting...).  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
2. Select Messages and press the Select  
(Left) soft key or the  
(Left) soft key or the  
key.  
3. Scroll to Templates and press the Select  
key.  
4. Highlight Text templates and press the Select  
(Left) soft key or the  
key.  
5. Press the Options  
Select  
(Left) soft key, select Add new and press the  
(Left) soft key or the  
key.  
6. Enter the text for the new template into the field and press the Options  
(Left) soft key.  
7. Select Save to templates and press the Select  
(Left) soft key or the  
key.  
The new text displays in the Messages templates list.  
Messages 67  
   
Picture Messages  
This menu allows you to use the Picture Message Service.  
Picture Messages is a message service that provides delivery of personal picture  
messages from phone to phone or from phone to e-mail.  
In addition to the familiar text content of text messages, picture messages can  
contain images, graphics, voice, and audio clips. A Picture Messages message is a  
multimedia presentation in a single file. It is not a text file with attachments.  
The Picture Message icon (  
) displays when you receive a new picture message.  
Using the Picture Messages feature, your phone can receive and send messages  
that contain multimedia files, such as photos, sounds and images you downloaded  
from the Internet and recorded voice notes. This function is available only if it is  
supported by T-Mobile. Only phones that offer multimedia Messages features can  
receive and display picture messages.  
Sending a Picture or Video Message  
This menu allows you to create a new multimedia message and send to one or  
multiple destinations.  
1. When the Idle mode displays, press the Menu  
2. Select Messages and press the Select (Left) soft key or the  
3. Using the Up or Down Navigation key, highlight Create new and press the  
Select (Left) soft key or the key.  
(Left) soft key.  
key.  
4. Select Share picture and press the Select  
(Left) soft key or the  
key.  
Take picture  
1. Adjust the image by aiming the camera at the subject.  
2. Press the key.  
3. At the Send to My Album? prompt, press the Yes soft key (to save the  
picture in My Album) or press the Options soft key and select Send to.  
The Recipients screen displays.  
4. If you selected Send to, enter the Recipient phone number in the To field  
and press the Send  
key.  
68  
Creating and Sending New Messages  
Get from Fun & Apps  
1. Scroll to the Images or Videos folder and press the Select  
key or the key.  
2. Highlight an image or video name from the folder and press the Select  
(Left) soft key or the key.  
(Left) soft  
3. Enter a contact phone number in the contact field and press the Send  
soft key.  
Picture Messages Options  
Prior to sending the Picture message file, press the Options  
(Left) soft key to  
access the following options:  
• Preview: displays a preview of the Picture message prior to sending.  
• Insert: inserts a predefined Text template, Text emoticon, Phonebook entry, or  
Bookmark into the message.  
-
Add item: inserts an Image, Sound or Video.  
-
Create item: temporarily exits from the current message and allows you to  
create either a new photo, video clip, or audio clip for your current text message.  
Text template: allows you to insert one of the preset message templates to the  
text, such as (Out of Office, I’m in a meeting..).  
Text emoticon: adds an a emotion (created by phone characters) to your  
message. An example would be: which creates a :-) “happy face”.  
Phonebook: adds the contact information for an entry from Phonebook directly  
to your message.  
-
-
-
-
Bookmarks: allows you to add a web address from your Favorites list of Internet  
sites to the message.  
• Add recipients: updates the recipient list by appending it with information form  
either your Recent Call Log, Contacts list, or Group entries.  
-
-
-
Recent log: displays a brief list of recently dialed phone numbers from which to  
choose. Press the key to add a selected number to your message’s  
recipients list field. This entry can later be appended prior to sending the  
message.  
Contacts: inserts additional recipients from your Phonebook by using your Up  
and Down Navigation keys to select those entries you wish to add. Press the  
key to place a checkmark next to those entries then press the Done softkey to  
return to the message.  
Groups: inserts additional Group members from your Phonebook by using your  
Up and Down Navigation keys to select those entries you wish to add.  
-
-
My Album: adds the recipients to My Album.  
My Journal: adds the recipients to My Journal.  
Add page: allows you to add a text page to your picture message.  
Messages 69  
• Input language: allows you to change the input language to English, Français  
or Español.  
• Edit style: allows you to edit the style of this page or all the pages in the picture  
message. You can also edit the Background color, Page duration, Font color, and  
Font style when you select the All pages option.  
• Add subject: allows you to add a subject field to the picture message.  
• Add attachment: allows you to add either a file, card, or other information such  
as a calendar entry, task, or note.  
-
-
-
-
-
-
-
-
-
-
File: allows you to insert an audio, graphic, or video clip to your message as an  
attached file.  
Name card: allows you to insert the contact information for an entry from the  
Phonebook directly to your message as an attached file.  
Appointment: allows you to insert an Appointment entry from your calendar  
directly to your message as an attached file.  
Anniversary: allows you to insert an Anniversary entry from your calendar  
directly to your message as an attached file.  
Private: allows you to insert a Private entry from your calendar directly to your  
message as an attached file.  
Holiday: allows you to insert a Holiday entry from your calendar directly to your  
message as an attached file.  
Important: allows you to insert an entry from your calendar tagged as Important  
directly to your message as an attached file.  
Tasks: allows you to insert an entry from your calendar tagged as a Task directly  
to your message as an attached file.  
Notes: allows you to insert a presaved Note (text) directly to your message as an  
attached file.  
Bookmarks: allows you to add a web address from your Bookmarks list of  
Internet sites as an attachment to the message.  
Sending options:  
-
Priority: you can select the priority level of your messages.  
-
Expiration: select the length of time you wish the message to remain on the  
MMS server.  
-
-
Delivery: you can set a time delay before the phone sends your messages.  
Request delivery report: when this option is enabled, the network informs  
you whether or not your message was delivered.  
-
-
Request read report: when this option is enabled, your phone sends a  
request for a reply along with your message to the recipient.  
Keep a copy: you specify whether you want to keep a copy of the sent  
messages on your phone.  
Save to Drafts: allows you to save the picture message in the Drafts folder.  
70  
Voicemail  
Save to Templates: allows you to save the picture message as a picture  
template.  
4. Scroll to locate the desired file and press the Select  
(Left) soft key or  
the  
key.  
Note: A picture message should only be sent to a phone which can support the receipt and display of this  
message type.  
5. Press the Send key when finished then press the  
key to return to the  
Idle mode.  
Voicemail  
Changing the Voice Mail Name and Number  
Your SIM card gives you a default service number for the voice mail center; however,  
you may need to change the number. Use the following procedures to change your  
voice mail number.  
1. In Idle mode, press the Menu  
2. Highlight Messages and press Select  
3. Highlight Messages settings and press the Select  
the key.  
(Left) soft key.  
(Left) soft key or the  
key.  
(Left) soft key or  
4. Highlight Voice mail and press the Select  
(Left) soft key or the  
key.  
5. Press the Edit softkey.  
6. Highlight Name to edit the Voice Server Name and press  
to delete the  
current name; then use your keypad to enter a replacement name.  
-OR-  
7. Highlight Center address to edit the Voice Mail Number and press  
to  
delete the current number.  
8. Enter your new Voice Server number and press the Save soft key or the  
key to save this new number.  
9. Press the  
key to return to Idle mode.  
Push Messages  
A Push message is a way of delivering content (e.g. images, ringtones, etc.) to  
mobile phones that are WAP enabled. Push messages don’t send the content in the  
text message, rather the mobile phone is directed where to retrieve the content. For  
Messages 71  
       
Voice Notes  
In this menu, you can record a voice note of up to one minute long and then  
immediately send it via Picture or Multimedia messaging.  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
2. Select Voice notes and press the Select  
(Left) soft key or the  
key.  
3. Press the Record (Left) soft key and begin recording your Voice note.  
Note: If the recording time expires, the message is automatically saved to Voice List.  
4. Press the Stop (Right) soft key to stop the recording or pause the recording  
by pressing the  
key.  
5. Press the Options  
(Left) soft key to display the following options:  
• Send to: sends your voice note to a recipient or list of recipients.  
• Play: plays the memo.  
• Re-record: discards the current memo and begin another session.  
• Set default destination: removes or replaces the default destination for this  
voice note.  
• Set as: sets the audio file as a voice call ringtone, caller ringtone or an alarm  
tone.  
6. Press the Send soft key when you are finished.  
The Recipients menu displays.  
7. Enter the recipient information and press the Send soft key.  
Note: Your Voice Notes automatically save to the Sounds folder unless you specify another location.  
8. Press the  
key to exit.  
Using Instant Messenger (IM)  
The Instant Messenger function allows you to send and receive instant messages  
using AIM, ICQ, Windows Live, and Yahoo communities. You must first create a  
default community account before accessing it on your phone. To access your  
default community session settings, use the following steps:  
Creating a Default Community  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
(Left) soft key or the key.  
(Left) soft key or the key.  
2. Highlight IM, and press the Select  
3. Select Settings and press the Select  
72  
   
Retrieving New Messages  
4. Highlight Choose your community and press the Select  
key or the key.  
5. Highlight a community, AIM, ICQ, Windows Live, or Yahoo! and press the  
Select (Left) soft key or the key.  
(Left) soft  
6. Sign on to your IM account.  
Signing on to your IM Account  
Although each account type differs, the initial sign in procedure is common to all  
supported types. Before beginning the sign in procedure, you must complete the  
previous procedures for selecting your default IM Community.  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
key.  
2. Highlight IM, and press the Select (Left) soft key or the  
3. Navigate through the menu selections depending on the selected  
community.  
Retrieving New Messages  
While text messages from other phones are delivered directly to your phone, Picture  
(multimedia) messages are stored in the Inbox of the message server and the server  
alerts you to new messages. Therefore you need to retrieve new messages to your  
phone and read them on the phone.  
Locating a Message  
1. In Idle mode, press the Menu  
2. Press the Select  
(Left) soft key and highlight Messages.  
(Left) soft key or the  
key.  
3. Highlight Inbox and press the Select  
(Left) soft key. The message list  
opens.  
The icons on the left of the number indicates the message type.  
: indicates a new Voice note message  
: indicates a new Text message (saved to SIM card)  
: indicates a new Text message (saved to Phone)  
: indicates a new Picture message  
: indicates a new Push message  
Messages 73  
 
Retrieving a Voice Note  
Voice Notes are attachments to Picture Messages. When you receive a Voice Note,  
the Picture Message icon displays in the Inbox.  
1. In Idle mode, press the Menu  
2. Highlight the Sounds icon and press the  
3. Highlight the Voicemsg.amr and press the Options (Left) soft key.  
(Left) soft key and highlight Fun & Apps.  
key.  
4. Select Play and press the Select  
(Left) soft key or the  
key to listen  
to the Voice note.  
Voice Note Options  
While viewing the Voice Note file, press the Options  
options:  
(Left) soft key to access the  
Play: plays the selected Voice note.  
Send via: sends the selected Voice note as a message or to a Bluetooth enabled  
device.  
Move: moves the Selected or Multiple voice note(s) to the Phone or Memory card.  
Copy: copies the Selected or Multiple Voice note(s) to the Phone or Memory card.  
Delete: deletes the Selected, Multiple, or All saved voice notes.  
Rename: renames the selected Voice note.  
Create folder: creates a folder for the selected Voice note and places the Voice  
note in the folder.  
Sort by: sorts Voice notes by, Date, Type, Name, or Size.  
Bluetooth visibility: allows a Bluetooth enabled device to see the Selected or  
Multiple Voice Notes on your handset.  
Lock: protects the Voice note from deletion.  
Properties: shows you information about the Voice note, such as size, format,  
duration, forwarding, time and date the message was created, and the location of  
the Voice message file.  
Retrieving a Text Message  
When a new Text message comes in, the display (in Idle mode) shows a new  
Message notification icon ( ) along with the available sender’s information.  
1. In Idle mode, press the Menu  
(Left) soft key.  
2. Highlight Messages and press the Select  
(Left) soft key or the  
key.  
74  
Retrieving New Messages  
3. Highlight Inbox and press the Select  
(Left) soft key. The message list  
opens.  
The icons on the left of the number indicates the message type.  
4. Use the Up or Down Navigation keys to select the message.  
5. Press the  
key to open and read the message.  
key to return to Idle mode.  
6. Press the  
Text Message Options  
While viewing the content of a message, press the Options  
(Left) soft key to  
access the following message options:  
Reply via Message/Share picture/Voice note: replies to the currently selected  
text message.  
Forward: forwards the selected text message to another recipient.  
Call back: dials the phone number of the sender of the text message.  
Delete: deletes the selected text message from the Inbox.  
Move to phone/SIM: moves the selected text message to the phone or SIM  
depending on the default setting.  
Move to My folder: moves the selected text to My folder.  
Save to Phonebook: saves the selected text message recipient information to the  
Phonebook.  
Save as template: saves the selected text message as a template.  
Print via Bluetooth: sends the contents of the selected text message to a  
Bluetooth enabled printer.  
Lock: locks the message to protect it from deletion.  
Retrieving a Picture Message  
When a new Picture message is delivered, the screen displays the Picture Message  
icon (  
) and a text notification along with the sender’s number.  
1. In Idle mode, press the Menu (Left) soft key.  
2. Highlight Messages and press the Select  
(Left) soft key or the  
key.  
3. Highlight Inbox and press the Select  
(Left) soft key. The message list  
opens.  
The icons on the left of the number indicates the message type.  
4. Select a picture message from the list.  
Messages 75  
5. Press the Options  
Select  
(Left) soft key, highlight Properties, and press the  
(Left) soft key or the  
key to view brief information about  
the message, such as the sender’s number, the message size, and the  
subject.  
If you want to view the message later in the Inbox, press the Back (Right)  
soft key.  
6. To view the message, highlight View, and press the Select  
key or the key.  
7. To play the message, press the  
To pause the audio/video clip, press the  
To stop the audio/video clip press the Stop soft key.  
(Left) soft  
key.  
key.  
8. To scroll through the message (if additional text page were added), press  
the Up or Down key.  
9. Press the  
key to return to Idle mode.  
Note: You can also access messages by navigating to your Inbox (Menu > Messages).  
Retrieving a Picture Message  
1. In Idle mode, press the Menu  
(Left) soft key.  
2. Highlight Messages and press the Select  
(Left) soft key or the  
key.  
3. Highlight Inbox and press the Select  
(Left) soft key. The message list  
opens.  
The icons on the left of the number indicates the message type.  
4. Select a Picture message from the list and press the Select  
(Left) soft  
key or the  
key.  
Picture Message Options  
While viewing the picture message, press the Options  
the following message options:  
(Left) soft key to access  
Play: displays or plays the current picture message.  
Reply via Message/Share picture/Voice note: replies to the currently selected  
picture message.  
Reply to All: replies to all recipients of the message.  
Forward: forwards the message to another person.  
Call Back: calls the sender of the message.  
Delete: deletes the message.  
76  
Retrieving New Messages  
Move to My Folders: moves the message to the phone’s My Folder location.  
Save as Template: saves the message as a template for this message type. This  
template can be used to save time during the creation of the next similar message.  
Save Items: saves the Picture content to My Album.  
Save to Phonebook: saves the recipient or sender’s information from the  
message to your Phonebook on either the Phone or SIM.  
Print via Bluetooth: sends the contents of the message to a Bluetooth compatible  
printer.  
Lock: locks the message by using the phone’s password to access the contents.  
Properties: displays some of the file properties for the message such as: sender,  
date/time, file size, priority, etc.  
Retrieving a Push Message  
A Push message is a way of delivering content (e.g. images, ringtones, etc.) to  
mobile phones that are WAP enabled. With a Push message you don't actually send  
the content in the text message, you direct the mobile phone where to retrieve it.  
1. Select a Push message from the list and press the Options  
(Left)  
soft key.  
The following options display:  
• View: displays the Push Message text.  
• Delete: deletes the selected, multiple, or all Push messages.  
• Move to My folders: moves the selected, multiple, or all Push messages  
to My folders.  
• Sort by: sorts the Inbox messages by Date, Name, Type, Size, Subject,  
or by messages that are Locked/Unlocked.  
2. Highlight the View option and press the Select  
(Left) soft key or the  
key to review the message contents.  
While reading the message, you may choose the following options by pressing the  
Options (Left) soft key:  
Open URL: displays the website on your WAP browser.  
Properties: displays the URL details.  
Delete: deletes the selected message.  
Move to My folders: once a folder is created in the My folders menu, this option  
moves the selected Push message to the named folder.  
Messages 77  
   
Push Message Options  
Receiving Option: you can specify whether to turn push message reception On  
or Off.  
Service Loading: you can specify whether to load this service:  
Always  
Prompt  
Never  
Using Message Templates  
Your phone has message templates (both Text and Picture templates) which are  
retrievable when creating a message. You can change the templates as your  
preferences or send a message immediately.  
1. In Idle mode, press the Menu  
(Left) soft key.  
2. Highlight Messages and press the Select  
(Left) soft key or the  
key.  
3. Highlight the Templates option and press the Select  
the key.  
4. Highlight a template type (Text or Picture message) and press the  
Select (Left) soft key or the key.  
5. Use the Up or Down Navigation Keys to select a current template message  
and press the Options (Left) soft key to access the following options:  
(Left) soft key or  
• Send: send a message using the template.  
• Add new: adds a new template.  
• Edit: changes the currently Selected template.  
• Delete: deletes the currently Selected or All templates.  
6. Press the  
key to return to Idle mode.  
Deleting all messages  
You can delete the messages in each message folder(s) individually or all at one  
time. You can also delete all of your messages at one time.  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
2. Highlight Messages, and press the Select  
(Left) soft key or the  
key.  
3. Highlight Delete all and press the Select  
(Left) soft key or the  
key.  
4. Use the Up or Down Navigation key to highlight the message folder(s) you  
want to delete.  
78  
   
Messages Settings  
5. Press the  
key to mark the folder for deletion.  
• All: selects all of the list items and marks each one for content deletion.  
• Inbox: selects the Inbox folder and mark its files for deletion.  
• Sentbox: selects your Sent folder and marks its files for deletion.  
• Outbox: selects your Outbox folder and marks its files for deletion.  
• Drafts: selects the saved Drafts and marks its files for deletion.  
• My folders: selects any created folders and marks them for deletion.  
To view the contents in each folder, use the Right key to display the  
folder’s contents or use the Left key to close the folder’s contents.  
Select All to delete all of the messages in all folders.  
6. Press the Delete soft key. At the “Delete?” confirmation, press the Yes  
soft key or the  
key to confirm your deletion.  
7. Press the  
key to return to Idle mode.  
Messages Settings  
You can set up various options for using messaging services.  
1. From the Idle mode, press the Menu  
(Left) soft key.  
(Left) soft key or the  
2. Highlight Messages, and press the Select  
key.  
3. Highlight Messages settings and press the Select  
the key.  
(Left) soft key or  
4. Select the type of messages you want to change.  
• Text messages  
• Picture message  
• Broadcast message  
• Voice mail  
• Push message  
5. Press the Select  
(Left) soft key or the  
key.  
Messages 79  
   
Text Message  
The following options are available:  
Common settings: sets the following options:  
Reply path: allows the recipient of your message to send you a reply message  
using your message center, if your network supports this service.  
Delivery report: allows you to activate or deactivate the report function. When this  
function is activated, the network informs you whether or not your message was  
delivered.  
Text message center settings: sets the default method of text message  
transmission used by the Text message center. The options are:  
T-Mobile  
Text message center 2  
Text message center 3  
Text message center 4  
Picture Message  
The following options are available:  
Sending Options:  
• Priority: you can select the priority level of your messages.  
• Expiration: select the length of time you wish the message to remain on the  
MMS server.  
• Delivery: you can set a time delay before the phone sends your messages.  
• Message size: displays the size of the selected message.  
• Request delivery report: when this option is enabled, the network informs  
you whether or not your message was delivered.  
• Request read report: when this option is enabled, your phone sends a  
request for a reply along with your message to the recipient.  
• Keep a copy: you specify whether you want to keep a copy of the sent  
messages on your phone.  
Add my name card: attaches your name card to the Picture message.  
Receiving Options:  
This option specifies the category of messages you want to receive and allows you  
to set the following:  
• Send delivery report: when this option is enabled, the phone informs the  
network whether or not your message was received.  
• Send read report: when this option is enabled, your phone sends a  
notification back to the recipient indicating that your message was received.  
• Reject unknown: automatically rejects messages with a category of  
unknown.  
80  
Broadcast Messages (SIM Card Dependent)  
• Reject advertisement: automatically rejects messages with a category of  
advertisement.  
Auto resize image  
No resize  
100 KB  
300 KB  
Creation mode  
Restricted  
Warning  
Free  
Default style  
Font color  
Font style  
Background color  
Page duration  
Broadcast Messages (SIM Card Dependent)  
This network service allows you to receive text messages on various topics, such as  
the weather or traffic.  
Please contact T-Mobile's customer service center for further details.  
Voice Mail  
The following options are available:  
Voice mail: specifies the default phone number used for access of phone’s remote  
voicemail.  
Push Message  
Receiving Option: you can specify whether to turn push message reception  
On or Off.  
Service Loading: you can specify whether to load this service:  
Always  
Prompt  
Never  
Messages 81  
   
Memory Status  
You can check the amount of the memory used and the memory remaining for Inbox,  
Sentbox, Outbox, Drafts, and My folders. The display shows the total space including  
the used and free space. You can also view how much space is currently occupied  
by each message box.  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
2. Highlight Messages, and press the Select  
(Left) soft key or the  
key.  
3. Highlight Memory Status and press the Select  
(Left) soft key or the  
key.  
4. Use your Up and Down Navigation keys to select a particular folder for  
review.  
5. Press the Select  
(Left) soft key or the  
key. The contents of that  
folder are then listed.  
6. Press the  
key to return to Idle mode.  
82  
 
Media Player  
Section 9: Fun & Apps  
Topics Covered  
This section outlines the various applications that are available on your phone.  
Media Player  
This feature allows you to access both local and streaming music, video, or playlists  
and then play them through a built in Media Player.  
You can add music files, or play music stored in your playlist.  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
2. Select Fun & Apps and press the Select  
(Left) soft key or the  
key.  
3. Highlight Media player and press the  
4. Highlight the All music, Recent music, or Most played music folder and  
press the key.  
key.  
5. Select a music file from the list, press the Options  
(Left) soft key and  
select one of the following options:  
• Play via: Play the selected music through the Phone or through a Bluetooth  
stereo headset.  
Fun & Apps 83  
         
• Add to playlist: adds the selected music or multiple music files to the  
current playlist.  
• Lock: locks the selected music file to protect it from deletion.  
• Properties: displays the file properties for the selected music file such as  
Size, Format, Duration, whether forwarding is possible, Date and Time of  
creation, and Location of the file.  
• Player settings: changes the music player settings for the Repeat mode,  
Shuffle, Visualization type, Volume and Show controller.  
-
Repeat: replays the entries in a selected playlist. Options include: Off, Repeat  
1, Repeat all (continually plays the music files listed in the current playlist (in  
sequence) until this option is disabled).  
-
-
Shuffle: randomly play songs from a selected playlist. Options include: On  
(enable this feature), or Off (disable this feature).  
Visualization type: changes the visual display on the music player’s main  
screen. Options include Disco lights or Rainbow pulse.  
-
-
Volume: changes the music player’s volume level. Options are: Mute, or 1-14.  
Show controller: displays the controller on the screen.  
When the music player displays, use the following icons to assist with functionality  
and navigation.  
Up Navigation key directly accesses the Current playlist.  
Down Navigation key stops the playback of the music file.  
Left Navigation key begins playback at the beginning of  
the currently selected music file.  
Right Navigation key begins playing the next song in the  
current playlist.  
toggles between playback and pause for the currently  
selected music file.  
displays the Music player menu options.  
returns to the previous menu or function.  
84  
Camera  
Camera  
Using the camera/camcorder module in your phone, you can take photos or video  
clips of people or events while on the move. Additionally, you can send photos  
and video clips to other people in a Picture Messages message or set a wallpaper or  
caller ID image.  
Using the Camera  
Taking Photos  
Note: When taking a photo in direct sunlight or in bright conditions, shadows may appear on the photo.  
1. When the Idle mode displays, press the key.  
2. Adjust the image by aiming the camera at the subject.  
3. Press the  
key to take the photo.  
4. Once the photo is taken, press the Options  
(Left) soft key and select  
Send to in order to attach the photo directly to a message.  
Note: Your camera produces photos in JPEG format. The number that appears in the upper-right of the  
screen indicates the current number of pictures were saved to the selected media and an approximate  
number of total pictures which can be taken at the current image size.  
5. Or before taking the photo, press the Options  
(Left) soft key to access  
camera options.  
Camera Options  
Take picture: takes a picture and saves it to the Images folder and asks if you  
want to save to My Album.  
Shooting mode: takes a photo in various modes. Once you change the mode, the  
corresponding indicator appears at the top right of the display.  
• Single shot: takes a single photo and allows you view it before returning to the  
shooting mode. Press the Select  
(Left) soft key to set the camera to either:  
-
Take and send  
-
Take and return  
• Multi-shot: takes a succession of consecutive photos. Press the Select  
(Left) soft key to set the number of shots to either:  
-
-
-
6 Shots  
9 Shots  
15 Shots  
Fun & Apps 85  
         
• Mosaic style: takes up to four photos and then groups them together into a  
single final photo. Press the Select  
mosaic photos to either:  
(Left) soft key to set the size of these  
-
2x2  
-
3x3  
Effects: allows you to select a custom color tone for your photo. Choose from the  
following Effects Mode:  
• No effects: automatically adjusts the picture for the best quality available.  
• Black & White: removes all color and displays the picture as black and white.  
• Sepia: adds a sepia tint to the picture. This is the common orange tint that was  
popular in early photography.  
• Negative: changes the image to a negative image display.  
Frames: allows you to select a custom frame border for your photo. Choose from  
one of the 21 available frames.  
Timer: sets a time delay before the camera takes the photo.  
Off  
3 seconds  
5 seconds  
10 seconds  
Default destination: removes or changes the default destination.  
Record video: switches from taking a photo to shooting a video clip using the  
camera’s camcorder setting.  
Go to Images: allows you to access the list of taken photos. Press the Options  
(Left) soft key to view the following options for these graphics:  
• View: displays the photo.  
• Send to My Album: sends the graphic to My Album.  
• Send via: attaches the graphic to a message or sends it to a Bluetooth device.  
• Set as: sets the currently selected graphic to display on the Main Display, or  
assigned to a Caller ID.  
• Move: moves either a Selected or Multiple graphics to one of the  
Fun & Apps (Phone) folders.  
• Copy: makes a copy of the Selected or Multiple graphics and then send it to one  
of the Fun & Apps (Phone) folders.  
• Delete: deletes either Selected or Multiple graphics.  
• Default destination: removes or changes the default destination.  
• Rename: renames either Selected or Multiple graphics.  
• Create folder: creates a new folder and then populate it with either Selected or  
Multiple graphics from the list.  
• Sort by: sorts the list of graphics by either: Date, Type, Name, or Size.  
86  
           
Using the Camera  
• Bluetooth visibility: enables or disables graphics visibility to Bluetooth  
devices.  
• Print via: prints the selected graphic either by a USB or Bluetooth printer.  
• Lock: locks the photo.  
• Properties: displays the properties of a photo.  
Camera settings: allows you to customize your camera settings. Choose the  
following options:  
• Size: sets the image size to 1280 x 1024, 800 x 600, 640 x 480, 320 x 240  
or 240 x 180. The icon for the selected image size appears on the capture  
screen.  
• Quality: selects the picture quality setting. Choose Superfine, Fine, Normal,  
Low, or Economy.  
• Display: allows you to choose between Actual screen, Full screen &  
Guideline, Full screen & Indicator, or Full screen.  
• Scene program: sets the lighting for the photos. Choose Normal or Night-  
time landscape.  
• Exposure metering: determines the light exposure needed for Matrix or Spot  
metering.  
• Shutter sound: selects a shutter tone sound when taking a photo.  
• White balance: sets the white balance for the camera. Choose Auto,  
Daylight, Cloudy, Incandescent, or Fluorescent.  
• Default storage: sets a default storage location for the photos taken on your  
phone. Choose Phone or Memory card.  
• Default name: sets a default prefix name for the photos taken on your phone.  
Camera shortcuts: displays the shortcut keys associated when using the camera.  
6. Press the Back soft key to return to the picture viewer.  
7. You can use the keypad to quickly change the camera options using the  
camera shortcut keys.  
Fun & Apps 87  
 
Camera Shortcuts  
Shortcut keys allow you to change options using your keypad, Navigation keys, and  
Volume key in capture mode. The following options are available.  
take a photo.  
zooms in or out (Up/Down). Not allowed if the picture  
size is set to its maximum value.  
adjusts the image brightness (Left/Right).  
switches the handset between camera and camcorder  
mode.  
changes the image size.  
changes the image quality.  
changes the camera shooting mode.  
changes the color tone of the photo.  
within the camera mode, this loads frame option #21  
on screen.  
sets a time delay (Off, 3, 5, or 10 seconds).  
switches to the Photo Album.  
adds a quadrant overlay to help you position your shot.  
Camera Options after a Photo is Taken  
After you take a photo, you can use various options by pressing the Options  
(Left) soft key. Highlight an option and press the Select  
(Left) soft key or the  
key. The following options are available:  
Viewfinder: exits from the picture options menu and returns to the camera’s  
viewfinder.  
88  
 
Using the Camera  
Send to: displays the Recipients screen.  
Edit message: displays a Picture message screen so you can edit the message prior  
to sending this photo.  
Delete: deletes the selected photo.  
Set as: sets the photo as your wallpaper on your Main Display or set the photo as a  
Caller ID for a contact.  
Default destination: removes or replaces the default destination for this photo.  
Edit picture: edits the picture by bringing up a set of options consisting of:  
Save as  
Effects (Black and White, Sepia, Negative, Milky, Lighting, Crayon Pastel,  
Oil Paint, Blur, Despeckle, or Sharpen)  
Partial effects (Partial Blur or Redeye Repair)  
Adjust (Brightness, Contrast, or Color)  
Transform (Resize, Rotate, or Flip)  
Crop  
Insert ( Frames, Cliparts, Emoticon or Text)  
Set as (myFaves icon, Wallpaper, or assign it to a Caller ID)  
Send via (Messages or Bluetooth)  
Print via (USB or Bluetooth)  
Rename: renames the current photo.  
Go to Images: navigates to the Images folder so you can move or copy this photo.  
Lock: locks this photo to protect it from deletion.  
Properties: displays the Size, Format, Resolution, Forwarding status, date and time  
the photo was created, and Location of this photo.  
Accessing the Photos Folder  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
2. Highlight Fun & Apps, and press the Select  
(Left) soft key or the  
key.  
3. Highlight Images and press the  
key.  
-OR-  
4. Scroll to the My Album folder and press the  
key.  
5. Use the Up or Down Navigation key to select a photo.  
6. Press the Select  
(Left) soft key or the  
key to display the photo.  
Fun & Apps 89  
Using the Camcorder  
Shooting Video  
Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you provide your  
subject with sufficient light by putting the light source behind you.  
1. When the Idle mode displays, press the key.  
2. Press the Options  
the Select  
(Left) soft key and select Record video then press  
(Left) soft key or the  
key.  
3. Before filming the video, press the Options  
(Left) soft key to access  
camcorder options.  
4. Adjust the image by aiming the camera at the subject.  
5. Press the key to begin shooting video.  
6. Press the Pause soft key to stop the recording.  
-OR-  
7. Press the  
Videos folder.  
key to stop the recording and save the video file to your  
8. Once the file saves, press the  
key to play back your video for review.  
Camcorder Options  
1. Press the  
key to access the camcorder options.  
• Record video: records a video segment.  
• Effects: sets a custom color tone for your video. Choose from the following  
Effects Mode.  
-
-
-
No effects: automatically adjusts the picture for the best quality available.  
Black & White: removes all color and display the picture as black and white.  
Sepia: adds a sepia tint to the picture. This is the common orange tint that was  
popular in early photography.  
-
Negative: changes the image to a negative image display.  
• Timer: sets a time delay before the camcorder begins to shoot video.  
-
-
-
-
Off  
3 seconds  
5 seconds  
10 seconds  
Take picture: switches from shooting a video clip to taking a photo.  
• Go to Videos: accesses the list of videos stored within the Video folder. Press  
the Options  
(Left) soft key to view the following options for these clips:  
-
Play: plays the video clip.  
90  
                 
Using the Camcorder  
-
-
-
Send via: attaches the multimedia file to a message or send it to a Bluetooth  
device.  
Move: moves either a Selected or Multiple videos to one of the My Album  
(Phone) folders.  
Copy: copies the Selected or Multiple videos and then sends it to one of the My  
Album (Phone) folders.  
-
-
-
Delete: deletes either Selected or Multiple multimedia videos.  
Rename: renames either Selected or Multiple videos.  
Create folder: creates a new folder and then populates it with either Selected  
or Multiple multimedia files from the list.  
-
-
Sort by: sorts the list of files by either: Date, Type, Name, or Size.  
Bluetooth visibility: enables Selected or Multiple videos visibility to Bluetooth  
devices.  
-
-
Lock: locks the video file to prevent deletion.  
Properties: displays the properties of a video file.  
• Camcorder settings: customizes your camcorder settings. Choose from the  
following options:  
-
Recording mode: sets the maximum allowable recording time. Choose  
Limit for Picture message, 10 Seconds, 30 Seconds, or For full  
memory.  
-
-
Size: sets the video size. Choose 176 x 144 or 128 x 96.  
Quality: selects the video quality setting. Choose Fine, Normal, Low, or  
Economy.  
-
-
-
-
Audio recording: allows you to choose whether to use audio in your video.  
Choose between On or Off (microphone is muted).  
White balance: sets the white balance for the camcorder. Choose Auto,  
Daylight, Cloudy, Incandescent, or Fluorescent.  
Default storage: sets a default storage location for the videos shot by your  
phone. Choose Phone or Memory Card.  
Default name: sets a default prefix name for the videos shot by your phone.  
• Camcorder shortcuts: displays the shortcut keys associated when using the  
camcorder.  
2. Press the Back (Right) soft key to return to the picture viewer.  
3. You can use the keypad to quickly change the camera options using the  
camera shortcut keys.  
Note: For more information about Camera Shortcut Keys see "Camcorder Shortcuts" on page 92.  
Fun & Apps 91  
   
Camcorder Shortcuts  
Shortcut keys allow you to change options using your keypad, Navigation keys, and  
Volume key in capture mode. The following options are available.  
shoots video.  
zooms in or out (Up/Down).  
adjusts the image brightness (Left/Right).  
switches the handset between camera and  
camcorder mode.  
changes the video size.  
changes the video quality.  
changes the recording mode.  
changes the effects used on the video.  
within the camcorder mode, this toggles the  
microphone On/Off (mute).  
sets a time delay (Off, 3, 5, or 10 seconds).  
opens the Video folder where the videos are stored.  
Camcorder Options after a Video is Taken  
After you shoot a video, you can use various options by pressing the Options  
(Left) soft key. Highlight an option and press the Select  
key. The following options are available:  
(Left) soft key or the  
Play: uses the Media Player to view the video segment.  
Send via: attaches the video file to a message or sends it to a Bluetooth device.  
Viewfinder: exits from the camcorder options menu and returns to the camcorder’s  
viewfinder.  
Delete: deletes either Selected or Multiple videos.  
92  
 
Sounds  
Rename: renames either Selected or Multiple videos.  
Go to videos: accesses the list of videos stored within the Video folder.  
Lock: locks the video file to prevent deletion.  
Bluetooth visibility: enables Selected or Multiple videos visibility to Bluetooth devices.  
Properties: displays the properties for this video file.  
Player settings: adjusts the Media Player’s playback Volume level (0-14) and either shows or  
hides the controller.  
Accessing the Video Folder  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
2. Highlight Fun & Apps, and press the Select  
(Left) soft key or the  
key.  
3. Highlight Videos and press the  
key.  
4. Use the Up or Down Navigation key to select a video file.  
5. To play the video, press the  
key. The file plays in the Media Player  
application.  
Using the Video  
When you are finished creating the video, use the Video Controller to playback the  
video or control the sound, lighting or volume while playing the video. For more  
Sounds  
In this menu, you can view the list of sounds downloaded from the web server or  
received in multimedia messages. You can set a downloaded sound as the current  
ring tone.  
Note: When downloading MegaTones® or HiFi Ringers TM, charges may apply.  
The following options are available:  
More HiFi Ringers  
Using the More HiFi Ringers option on the sounds list, you can access the web site  
preset by T-Mobile and download new HiFi Ringers.  
More MegaTones  
Using the More MegaTones option on the sounds list, you can access the web site  
preset by T-Mobile and download new MegaTones.  
Fun & Apps 93  
       
Music & Sounds  
Using the Music & Sounds option on the sounds list, you can access the web site  
preset by T-Mobile and download new Ringers, Tones, tunes, and Voices & Sounds.  
Images  
In this menu, you can view the list of images downloaded from the web server or  
received in messages. You can set a downloaded image as the current background  
image.  
The following options are available:  
More Wallpapers  
Using the More Wallpapers option, you can access the web site preset by T-Mobile  
and download new images.  
Note: When downloading Wallpapers, charges may apply.  
My Album  
My Album is a private online picture album that you can use to store and share  
pictures, videos, voice messages, and text.  
Use the following procedures to access My Album.  
Note: When accessing My Album, charges may apply.  
1. When the Idle mode displays, press the Menu  
(Left) soft key.  
2. Select Fun & Apps and press the Select  
(Left) soft key or the  
key.  
3. Highlight Images and press the Select  
(Left) soft key or the  
(Left) soft key or the  
key.  
key.  
4. Select My Album and press the Select  
The browser is launched and the T-Mobile Web page displays.  
5. Select the My Albums Menu link and press the Select (Left) soft key  
or the key.  
6. Photos sent to this folder are stored in the Inbox Album. Press the  
Select  
(Left) soft key to view the photos.  
7. Press the  
key to exit t-zones and return to the Idle mode.  
94  
   
Videos  
My Journal  
Make notes in My Journal, your online diary and Weblog. Keep it private to store your  
personal memories, or send e-mails to invite people to view and comment on your  
Journal.  
Note: When accessing My Journal, charges may apply. Contact T-Mobile customer service for more  
information.  
Default Images  
In this menu you can review the photos you’ve taken. Highlight a photo and press the  
Options  
(Left) soft key to choose from the following options:  
View: allows you to view the selected photo or image.  
Set as: sets the selected photo as Wallpaper or assigns it to a Caller ID.  
Take picture: uses the camera to take a photo.  
Create folder: creates a new folder to store images.  
Sort by: sorts the list of files by either: Date, Type, Name or Size.  
Properties: displays the properties for this image file.  
Videos  
In this menu, you can view a list of videos downloaded from the web server or  
received in multimedia messages. You can select a video clip from your Videos folder  
by scrolling to the video you want to view, highlighting a video and pressing the  
Options  
(Left) soft key to choose from the following options:  
Play: plays the selected video.  
Send via: sends the video via Picture message or to a Bluetooth device.  
Move: moves the selected or multiple videos to another location (for example, to  
the top of the menu) or into another, user-selected folder.  
Copy: copies the selected or multiple videos to another location (for example, to  
the top of the menu) or into another, user-selected folder.  
Delete: deletes the selected video or all downloaded videos.  
Rename: changes the name of the selected video.  
Record video: begins recording a new video.  
Create folder: creates a new folder and then places the newly recorded video  
inside the folder.  
Sort by: sorts the videos in this folder by Date, Type, Name or Size.  
Bluetooth Visibility: turns Bluetooth Visibility On or Off.  
Fun & Apps 95  
   
Lock: locks the video to protect it from deletion.  
Properties: displays the properties for this video file.  
Music  
In this menu you can review the Music you’ve downloaded. Highlight a music file and  
press the Options  
(Left) soft key to choose from the following options:  
Play: plays the selected music file.  
Send via: sends the music file via Picture message or to a Bluetooth device.  
Set as: myFaves ringtone, Voice call ringtone, Caller Ringtone, Alarm tone.  
Move: moves the selected or multiple videos to another location (for example, to  
the top of the menu) or into another, user-selected folder.  
Copy: copies the selected or multiple music files to another location (for example,  
to the top of the menu) or into another, user-selected folder.  
Delete: deletes the selected music file or all downloaded music files.  
Rename: changes the name of the selected video.  
Add to playlist: adds the selected music file to the current playlist.  
Create folder: creates a new folder and then places the music file inside  
the folder.  
Sort by: sorts the music files in this folder by Date, Type, Name or Size.  
Bluetooth visibility: turns Bluetooth Visibility On or Off.  
Lock: locks the music file to protect it from deletion.  
Properties: displays the size, format, duration, and forwarding information for this  
music file.  
Games  
You can download MIDlets (Java applications that run on mobile phones) from  
various sources using t-zones and store them in your phone as MIDlet files.  
When you access the Games menu, the list of default games displays. Once you  
download games, they are added to the list.  
Note: When downloading games, charges may apply. MIDlet game options differ depending on the selected  
MIDlet.  
MIDlet Options  
1. In the Games Menu, scroll to the MIDlet you want and press the  
Options  
(Left) soft key.  
The following options are available:  
96  
     
Other files  
• Start: starts the MIDlet.  
• Delete: deletes the selected MIDlet, multiple MIDLets, or All midlets.  
• Rename: renames the select MIDlet.  
• Lock: locks the MIDlet to protect it from deletion.  
• Properties: shows information about the MIDlet, such as file size, version,  
supplier, date and time created, description of the MIDlet, and the location where  
it is stored.  
2. Press the Back (Right) soft key or the  
key to exit and return to the  
Games list.  
Other files  
In this menu you can view or store other types of files without corruption, various  
document files and files stored in the phone’s memory, or on a memory card.  
Available file formats are Microsoft Word, Adobe PDF, Plain text, and several other  
file formats.  
Highlight a file and press the Options  
(Left) soft key to choose from the  
following options:  
Full screen view: displays a full screen view of the page.  
Zoom: magnifies (zooms in) or reduces the view (zooms out).  
Fit to screen: page, width, height.  
Go to: navigates to the previous page, next page, first page, or last page.  
Rotate: rotates the page from landscape to portrait view and vice versa.  
Screen panning: allows you to navigate the screen to see sections of the file  
hidden from view.  
Hide/Show controller: displays the media controller.  
Search: searches for keyword text strings.  
Delete: deletes the selected text.  
Bluetooth visibility: turns Bluetooth Visibility On or Off.  
Lock: locks the file to protect it from deletion.  
Properties: displays the file size, format, forwarding, created, and location.  
FileViewer shortcuts: displays the shortcut keys used for FileViewer.  
Send via bluetooth: sends the currently selected file via a Bluetooth enabled  
device.  
Memory status  
You can view the amount of memory being used on the Phone or Memory Card and  
memory remaining for Sounds, Images, Videos, Music, Games or Other files.  
Fun & Apps 97  
   
Section 10: Organizer  
Topics Covered  
This section outlines the various applications that are available on your phone.  
Organizer  
The Organizer allows you to set alarms, schedule appointments, view the calendar,  
createTasklists,createnotes,performsimplemathcalculations,calculatetips,check  
world time, synchronize your phone with the T-Mobile network, perform unit  
conversions, set a timer, and use a stopwatch.  
Alarm  
This feature allows you to:  
set up to 5 alarms to ring at specified times.  
set the phone to switch on automatically and ring the alarm even if the phone is  
switched off.  
98  
       
Alarm  
The following options are available:  
Wake-up alarm: the alarm rings to wake you up in the morning.  
Alarm 1: set the day, time, and tone for this alarm.  
Alarm 2: set the day, time, and tone for this alarm.  
Alarm 3: set the day, time, and tone for this alarm.  
Alarm 4: set the day, time, and tone for this alarm.  
Auto power-up: automatically powers up the phone at a specified time.  
To set the alarm:  
1. Highlight the Alarms option by pressing the Up or Down Navigation key  
then press the Select (Left) soft key or the key.  
2. Highlight the Wake-up alarm option then press the key.  
3. Highlight Alarm activation, press the Right Navigation key, press the  
key.  
4. Scroll down using the Down Navigation key and select from the following  
options:  
• Alarm time: allows you to enter the Hour, Minutes and AM or PM time for this  
alarm.  
• Alarm type: Melody is the default selection. Press the Options  
key and select Change to view a list of other options.  
(Left) soft  
• Alarm tone: displays the Fun & Apps menu and allows you to select an alarm  
tone from the Sounds or Music folder. Press the Options  
select Change to view a list of other options.  
(Left) soft key and  
• Alarm volume: use the Left or Right Navigation key to decrease or increase  
the alarm volume.  
• Alarm day: press the Options  
(Left) soft key and select Change to view a  
list of other options. Use the Up or Down Navigation key to highlight an occurrence  
of the day(s) you wish your alarm to sound. Press the  
key to select the day  
entry. Press the OK soft key to save your settings.  
• Snooze: sets the number of times this alarm type repeats (1 minute, 3 minutes, 5  
minutes, 7 minutes, or 10 minutes).  
• Repeat: sets the number of times the snooze alarm repeats (1 time, 2 times, 3  
times, 5 times, or 10 times).  
5. Press the Options  
(Left) soft key then select the Save option and  
(Left) soft key or the key.  
press the Select  
6. Press the  
key to return to Idle mode.  
Note: Your phone is preset to a 12-hour format. To change the time format, see "Time & date" on page  
Organizer 99  
7. To stop the alarm when it rings, press the OK soft key, Volume keys,  
key, key, or key.  
Calendar  
With the Calendar feature, you can:  
consult the calendar by month, week, or day.  
set schedules and note anniversaries, holidays, or other important dates.  
set an alarm to act as a reminder, if necessary.  
check your memory status.  
When you select the Calendar menu, the following options are available:  
Month view  
When you select this option, the calendar displays the selected month with the  
current date highlighted.  
The calendar displays the following icons when an event is scheduled:  
Appointment  
Anniversary  
7
Holiday  
Important  
Private  
Calendar Options  
The following options are available when you press the Options  
(Left) soft key:  
View: displays the events scheduled for the selected date.  
View mode: displays the Day view or Week view of the selected day.  
Create: creates an Appointment, Anniversary, Holiday or other event.  
Go to: displays the Today view or allows you to enter a Date to view.  
Event list: this option allows you view a list of all currently active events by type  
(Appointment, Anniversary, Holiday, Important, or Private).  
Delete: deletes all events for a Selected date, Periods of time, or This month. You  
can also delete All events.  
100  
   
Calendar  
Settings:  
• Starting day: determines the first day of the week for the calendar (Sunday or  
Monday).  
• Default view mode: determines the default view, Month, Week or Day.  
Missed alarm event: displays any missed alarm events.  
Memory status: displays a list of the different Calendar event categories along  
with the memory allocation for each.  
Week view  
When you select this option, the calendar displays the selected week with the  
current date and time highlighted. The following options are available when you  
press the Options  
(Left) soft key:  
View: displays the selected day.  
View Mode: displays the Day view or Month view of the selected day.  
Create: creates an Appointment, Anniversary, Holiday or other event.  
Go to: displays the Today view or allows you to enter a Date to view.  
Event list: this option allows you view a list of all currently active events by type  
(Appointment, Anniversary, Holiday, Important, or Private).  
Delete: deletes all events for a Selected date, Periods of time, or This month. You  
can also delete All events.  
Settings:  
• Starting day: determines the first day of the week for the calendar (Sunday  
or Monday).  
• Default view mode: determines the default view, Month, Week or Day.  
Missed alarm event: displays any missed alarm events.  
Memory status: displays a list of the different Calendar event categories along  
with the memory allocation for each.  
Day view  
When you select this option, you are taken to the Day view of the selected day with  
any events listed. The following options are available when you press the Options  
(Left) soft key:  
View: displays the selected day.  
Create: creates an Appointment, Anniversary, Holiday or other event.  
Send via: sends the selected event as an attachment in a message or to a  
Bluetooth enabled device.  
Organizer 101  
View mode: displays the Week view or Month view of the selected month.  
Event list: this option allows you view a list of all currently active events by type  
(Appointment, Anniversary, Holiday, Important, or Private).  
Delete: deletes all events for a Selected date, Periods of time, or This month. Also  
deltes Previous data. You can also delete All events.  
Save to Fun&Apps: saves the selected event to the Fun&Apps folder.  
Print via Bluetooth: prints to a Bluetooth enabled printer.  
Settings:  
• Starting day: determines the first day of the week for the calendar (Sunday or  
Monday).  
• Default view mode: determines the default view, Month, Week or Day.  
Missed alarm event: displays any missed alarm events.  
Memory status: displays a list of the different Calendar event categories along  
with the memory allocation for each.  
Tasks  
This feature allows you to enter a list of tasks.  
1. Highlight the Tasks option and press the Select  
(Left) soft key or the  
(Left) soft key or the  
key.  
2. Press the Options  
(Left) soft key.  
3. Highlight the Create option and press the Select  
key.  
4. Enter the title of the task in the Title text box then press the Down soft key.  
5. Enter the text for the task in the Task text box.  
6. Press the Options  
the Select  
Your Task list saves to the Calendar.  
Tasks Options  
(Left) soft key, select the Save option, then press  
(Left) soft key or the  
key.  
While accessing the Tasks, press the Options  
(Left) soft key to use the options  
for the entry.  
The following options are available:  
• View: allows you to view the selected task.  
• Create: creates a new task.  
• Send via: attaches the task to a message or sends it to a Bluetooth  
device.  
• Done: marks this task as completed.  
102  
   
Tasks  
• Sort by: sorts the tasks list by tasks that are Done, by their Due date, or  
Priority.  
• Delete: deletes the selected task.  
• Save to Fun&Apps: saves the selected task to the Fun&Apps folder.  
• Print via Bluetooth: sends the task to a Bluetooth compatible printer.  
• Missed alarm event: displays any missed alarm events.  
• Memory status: displays a list of the different Calendar event  
categories along with the memory allocation for each.  
Editing the Task List  
When you select the Task list menu, the current contents display with a status check  
box and a priority marker.  
If the item is completed, a check displays in the check box.  
Items are ranked in priority (1-3) and display a red triangle with the priority number  
inside.  
1. To mark an item Done, highlight the item and press the Options  
soft  
key.  
2. Highlight the Done option and press the Select  
(Left) soft key or the  
key.  
The status check box next to the item displays a check mark.  
3. To edit other fields for this item, highlight the item and press the Options  
soft key.  
4. Highlight the View option and press the Select  
(Left) soft key or the  
soft key.  
key.  
5. Scroll to the item you wish to change and press the Options  
6. Highlight the Edit option and press the Select  
(Left) soft key or the  
key.  
7. Enter the new information and press the Options  
soft key.  
8. Press Save and press the Select (Left) soft key or the key.  
9. Press the key to return to Idle mode.  
Organizer 103  
Appointment Events  
This option allows you to schedule Appointments in your calendar. You can also set  
an alarm to remind you of the appointment.  
1. While viewing the Calendar, press the Options  
2. Highlight the Create option and press the Right Navigation key.  
3. Select Appointment from the menu and press the Select (Left) soft  
key or the key.  
soft key.  
4. Enter the occasion in the Title text box then press the Down Navigation  
key.  
5. Continue to enter other information including Details, Start date, Start time,  
End date, End time, and Location.  
6. Highlight Alarm and press the  
key to enter a check mark and activate  
the Alarm option.  
7. Press the Options  
option then press the Select  
Your Appointment saves to the Calendar.  
8. Press the key to return to Idle mode.  
Anniversary and Birthday Events  
soft key when you are finished, select the Save  
(Left) soft key or the key.  
This option allows you to record Anniversaries and Birthdays in your calendar. You  
can also set an alarm to remind you of important anniversaries.  
1. While viewing the Calendar, press the Options  
soft key.  
2. Highlight the Create option and press the Right Navigation key.  
3. Select Anniversary and press the Select  
(Left) soft key or the  
key.  
4. Enter the occasion in the Title text box then press the Down Navigation  
key.  
5. To create a Birthday event, highlight the Details field, press the Options  
soft key and select Birthday from Contacts.  
104  
Tasks  
6. The contacts that contain Birthday information display on the screen.  
7. Scroll to the contact whose birthday you wish to add to the calendar and  
press the Select (Left) soft key or the key.  
Note: The contact that contains the Birthday event field in their contact information must be saved to the  
Phone before you can create a Birthday event.  
8. Continue to enter other information including Details, Date, Alarm, and  
whether or not to Repeat every year.  
9. Press the Options  
option then press the Select  
Your Anniversary information saves to the Calendar.  
10. Press the key to return to Idle mode.  
Holiday Events  
1. While viewing the Calendar, press the Options  
2. Highlight the Create option and press the Right Navigation key.  
3. Select Holiday from the menu and press the Select (Left) soft key or  
the key.  
soft key when you are finished, select the Save  
(Left) soft key or the key.  
soft key.  
4. Enter the occasion in the Title text box then press the Down Navigation  
key.  
5. Continue to enter other information including Details, and Date.  
6. Highlight Repeat every year and press the  
key to enter a check mark  
and activate the repeating holiday event.  
7. Press the Options  
option then press the Select  
Your Holiday event saves to the Calendar.  
8. Press the key to return to Idle mode.  
Important Event  
1. While viewing the Calendar, press the Options  
2. Highlight the Create option and press the Right Navigation key.  
3. Select Important from the menu and press the Select (Left) soft key  
or the key.  
soft key when you are finished, select the Save  
(Left) soft key or the key.  
soft key.  
4. Enter the occasion in the Title text box then press the Down Navigation  
key.  
Organizer 105  
5. Continue to enter other information including Details, Start date, Start time,  
End date, End time, and Location.  
6. Highlight Alarm and press the  
key to enter a check mark and activate  
the Alarm option.  
7. Press the Options  
option then press the Select  
Your Important event saves to the Calendar.  
8. Press the key to return to Idle mode.  
Private Event  
1. While viewing the Calendar, press the Options  
2. Highlight the Create option and press the Right Navigation key.  
3. Select Private from the menu and press the Select (Left) soft key or  
the key.  
soft key when you are finished, select the Save  
(Left) soft key or the key.  
soft key.  
4. Enter the occasion in the Title text box then press the Down Navigation  
key.  
5. Continue to enter other information including Details, Start date, Start time,  
End date, End time, and Location.  
6. Highlight Alarm and press the  
key to enter a check mark and activate  
the Alarm option.  
7. Press the Options  
option then press the Select  
Your Private event saves to the Calendar.  
8. Press the key to return to Idle mode.  
Viewing the Event List  
1. While viewing the Calendar, press the Options  
soft key when you are finished, select the Save  
(Left) soft key or the key.  
soft key.  
2. Highlight the Event list option and press the Right Navigation key.  
3. Select the type of event you wish to view and press the Select  
(Left)  
soft key or the  
key.  
The list of events for the selected type displays on the Calendar menu  
screen.  
106  
Notes  
Missed alarm event  
You can check on all of the events that you missed.  
1. Highlight the Missed event alarm option and press the Select  
(Left)  
key.  
soft key or the  
key.  
2. To view an event information, highlight an event and press the  
The missed alarm event information displays.  
3. To acknowledge and remove the event, press the Confirm soft key or the  
key.  
The event is removed from the Missed event alarm menu.  
Memory status  
This menu item shows the number of calendar events and how much memory  
remains for additional events. The events are broken down by Appointment,  
Anniversary, Holiday, Important, and Private.  
Notes  
This option allows you to create a note to attach and send in a message or send to  
another Bluetooth device, save to the Fun&Apps folder, or print using a Bluetooth  
compatible printer.  
1. Highlight the Notes option and press the Select  
(Left) soft key or the  
key.  
2. Press the Options soft key, select Create and press the Select  
soft key or the key.  
(Left)  
3. Enter the note in the text field. For more information, refer to "Entering  
4. Press the Options  
soft key, select Save and press the Select  
(Left) soft key or the  
key.  
Notes Options  
While accessing any Notes entry, press the Options  
soft key to use the options  
for the entry.  
The following options are available:  
View: displays a list of notes.  
Create: creates a note.  
Send via: attaches the graphic to a message or sends it to a Bluetooth device.  
Delete: deletes the currently selected Note.  
Organizer 107  
 
Save to Fun&Apps: saves the note to the FUN & Apps folder.  
Print via Bluetooth: sends the note to a Bluetooth compatible printer.  
Memory status: displays the number of notes and how much memory remains for  
additional notes.  
Calculator  
With this feature, you can use the phone as a calculator. The calculator provides the  
basic arithmetic functions; addition, subtraction, multiplication, and division.  
1. Enter the first number using the numeric keys.  
2. Enter the operation for your calculation by pressing the Left, Right, Up or  
Down Navigation key according to the illustration on the display. The  
(Left) soft key is used for the decimal or left and right brackets. The  
key  
moves the cursor left one position and the  
one position.  
key moves the cursor right  
3. Enter the next number.  
4. To view the result, press the = soft key or the  
Repeat steps 1 to 4 as many times as required.  
key.  
Tip Calculator  
This feature allows you to enter data about your meal and then displays the amount  
of tip to pay.  
World time  
This feature allows you to find out what time it is another part of world, using the  
Left and Right Navigation keys.  
The timeline displays automatically in your city. Press the Left or Right Navigation  
key to scroll to other cities and view the time for that location in the world.  
Synchronization  
This feature allows you to back up (synchronize) Contact information, Schedules,  
Tasks, and Notes, stored on your phone with your T-Mobile account on the network.  
Each time you edit contact information your phone automatically synchronizes with  
the web Address Book.  
Important!: Synchronization is a service offered to T-Mobile customers. Charges may apply.  
108  
             
Synchronization  
Sync now  
Once you determine the information you want to synchronize, this feature allows you  
to synchronize with the T-Mobile network.  
1. When the Idle mode displays, press the Menu  
2. Scroll to Organizer using the Navigation keys and press the Select  
(Left) soft key or the key.  
soft key.  
3. Highlight Synchronization and press the Select  
(Left) soft key or the  
key.  
4. Highlight Sync now and press the Select  
(Left) soft key or the  
key.  
5. The information synchronizes with the T-Mobile network and a  
confirmation dialog displays when finished.  
6. Press the  
View log  
This feature creates a log of the synchronization activity for viewing.  
1. When the Idle mode displays, press the Menu soft key.  
2. Scroll to Organizer using the Navigation keys and press the Select  
(Left) soft key or the key.  
key to return to Idle mode.  
3. Highlight Synchronization and press the Select  
(Left) soft key or the  
key.  
4. Highlight View log and press the Select  
(Left) soft key or the  
key.  
5. The screen default displays the Contacts sync log.  
6. Press the Right Navigation key to view the logs for Schedule, Task, and  
Note.  
7. Press the Back soft key when you are finished viewing the log.  
8. Press the  
key to return to Idle mode.  
Organizer 109  
Sync Settings  
This feature allows you to synchronize the Contacts, Schedules, Tasks and Notes to  
the T-Mobile network account.  
1. When the Idle mode displays, press the Menu  
2. Scroll to Organizer using the Navigation keys and press the Select  
(Left) soft key or the key.  
soft key.  
3. Highlight Synchronization and press the Select  
(Left) soft key or the  
key.  
4. Highlight Sync Settings and press the Select  
(Left) soft key or the  
key.  
5. Highlight the item you want to synchronize and press the  
key to place  
a check mark next to the item.  
6. Press the Save  
soft key to return to the PIM sync screen.  
7. Press the  
key to return to Idle mode.  
About sync  
This feature displays information about how the synchronization feature works and  
provides a URL for more specific synchronization information.  
Press the More Info soft key to launch the t-zones synchronization information.  
Note: Your t-zones feature must be activated by T-Mobile for this feature to work.  
Unit Conversion  
The conversion menu provides the following conversion categories:  
Currency: converts from one countries currency to another.  
Length: converts from one unit of measure to another.  
Weight: converts from one unit of weight to another.  
Volume: converts from one unit of volume to another.  
Area: converts from one unit of area to another.  
Temperature: converts from one unit of temperature to another.  
110  
   
Timer  
To convert a length, weight, volume, area, or temperature, do the following:  
1. Scroll to the conversion feature you wish to use and press the Select  
(Left) soft key or the  
key.  
2. Highlight the quantity you want converted by pressing the Left and Right  
Navigation key.  
Tip: To include a decimal point, press the  
key.  
3. Use the Up, Down, Left, and Right navigation keys to select the From and  
To units of measure for the quantity you want converted.  
4. Enter the quantity of the length, weight, volume, area, or temperature in  
the text box just below the From unit of measure.  
The conversion displays in the text box below the to unit of measure.  
5. Press the Back soft key to return to the Unit conversion menu.  
6. Press the  
Timer  
You can use this menu to set a timer. To enable the Timer, use the following options:  
key to return to Idle mode.  
1. Highlight the Timer option then press the Select  
(Left) soft key or the  
key.  
2. Press the Set soft key to enter the length of time.  
3. Enter the time and press the OK  
(Left) soft key.  
4. Press the  
key to start the timer. Press the  
key again to stop  
the timer.  
Stopwatch  
This feature allows you to use a stopwatch. Press the  
key to start the  
stopwatch. Press the Reset soft key to erase all stopwatch times recorded.You can  
maintain up to 50 separate lap times.  
Organizer 111  
       
Section 11: Changing Your Settings  
Topics Covered  
This section explains the sound and phone settings for your phone. It includes  
display settings, security settings, and extra settings associated with your phone.  
Profiles  
Sound Profiles  
You can customize various sound settings.  
1. When the Idle mode displays, press the Menu  
soft key.  
2. Select Settings and press the Select  
(Left) soft key or the  
key.  
3. Select Sound Profiles and press the Select  
(Left) soft key or the  
key. Use the Down Navigation key to scroll through the following list  
of available options:  
112  
           
Sound Profiles  
Normal  
To access the available options for this calling profile, press the Options  
key. Highlight Edit and press the Select (Left) soft key or the key. Use the  
soft  
Left and Right Navigation keys to move between the various tabs. This menu allows  
you to alter the audio settings for the following categories:  
Incoming Call: edits the properties for audio alert used for incoming phone calls.  
• Call alert type: selects the way in which the selected ringtone plays to notify  
you of an incoming call. Options include:  
-
Melody: the phone plays a melody.  
-
Increasing melody: the phone plays the melody at increasing volume levels  
during each consecutive ring.  
-
-
-
Vibration then melody: the phone vibrates and then plays the melody.  
Vibration and melody: the phone vibrates and also plays the melody.  
Vibration and increasing melody: the phone vibrates and then plays the  
melody at increasing volume levels during each consecutive ring.  
• Voice call ringtone: allows you to select a ringtone from your Fun & Apps folder  
which contains not only the default phone ringtones, but also any new ringtones  
which were downloaded from the Internet.  
• Ringtone volume: selects the volume for the Normal ringtone for incoming calls.  
• Auto reply: sets up an automatic text reply for incoming calls.  
New Messages: edits the properties for audio alert used for newly received  
messages.  
• Message alert type: selects the way in which the selected ringtone plays to  
notify you of an incoming call. Options include the use of either the Mute,  
Melody, Vibration, or a combination of the latter two.  
-
-
-
-
Melody: the phone sounds the selected melody.  
Vibration: the phone vibrates.  
Vibration and Melody: the phone vibrates and also plays the melody.  
Mute: the alert is muted.  
• Message alert tone: allows you to select either a Use effect tone (Message  
tone 1-5) or a personalized Use my alert tone from your Fun & Apps folder which  
contains not only the default phone tones, but also any new tones which have been  
downloaded from the Internet.  
Changing Your Settings 113  
             
• Message alert repetition: selects whether the message alert tone is used to  
notify you of a new message only Once or Periodic until you open the message.  
• Alert tone volume: selects the volume at which the tone plays. This range is  
from 1 - 7.  
Phone Sounds: allows you to edit the properties for phone’s audio properties while  
it is set to this mode  
• Keypad tone: selects what tone plays when the keypad keys are pressed.  
Options include the Beep or Xylophone.  
• Power on type: selects what tone plays when the phone is powered On.  
Options include a Melody, Vibration, Vibration and melody, or Mute.  
• Power off type: selects what tone plays when the phone is powered Off.  
Options include a Melody, Vibration, Vibration and melody, or Mute.  
• Phone sound volume: selects the volume at which the keypad tone plays.  
This range is from 0 - 7.  
Note: To save any changes made to this profile’s parameters, press the Options  
Save and press the Select (Left) soft key.  
soft key. Highlight  
Other Available Profiles  
The phone can be set to additional audio profiles which are available via the Profiles  
menu. Although each profile has similarities, they are each preset to use different  
audio parameters for incoming phone call alerts, message alerts, and phone usage.  
The Silent profile causes the speaker to mute and the phone only  
vibrates and displays information on its front panel LCD. This icon is  
accompanied on screen by the Vibrate icon.  
Notes: The Silent profile can also be activated by pressing and holding the  
key. An on screen message  
notifies you that the new Silent profile is now active. To deactivate this profile, press and hold the  
again.  
key  
The Driving profile keeps the speaker is active. In this case, the speaker  
is active and launches the currently selected ringtone or melody  
when the associated notification is activated. This icon is accompanied  
on screen by the Audio icon.  
The Outdoor profile keeps the speaker active, the volume settings are  
raised to their highest levels, any currently active ringtones or melodies  
are activated, and the phone’s vibrate feature is activated. This icon is  
accompanied on screen by the Vibrate/Audio icon.  
114  
                 
Display Settings  
The Airplane profile allows you to use many of your phone’s features,  
such as Games, Music, Notepad, Voice Memos, etc., but you cannot  
send or receive any calls or access online information. This icon is  
accompanied on screen by the Mute icon.  
Airplane mode  
Airplane Mode allows you to use many of your phone’s features, such as Games,  
Voice Notes, etc., when you are in an airplane or in any other area where making or  
receiving calls or data is prohibited. When your phone is in Airplane Mode, it cannot  
send or receive any calls or access online information.  
To turn on the Airplane feature:  
Highlight the Airplane option and press the  
Display Settings  
In this menu, you can change various settings for the display or backlight.  
1. When the Idle mode displays, press the Menu soft key.  
2. Select Settings and press the Select (Left) soft key or the  
key.  
key.  
3. Select Display Settings and press the Select  
(Left) soft key or the  
key.  
Use the Down Navigation key to scroll to and set the following options:  
Main display  
Wallpaper: selects from either the preloaded wallpapers found in the Fun & Apps  
folder or photographs which were either taken with the camera or downloaded from  
the Internet. Press the Up or Down Navigation keys to make your selection. Press the  
Select  
(Left) soft key or the  
key to make your selection.  
Greeting message: enters the text which appears on the screen then the phone  
powers on.  
Main menu style: selects whether the phone’s menus are presented in either a Grid  
menu style of List menu style. Press the Up or Down Navigation keys to make your  
selection. Press the Save  
(Left) soft key or the  
key to make your selection.  
Pop up list menu: selects whether the to activate pop up menus. Press the Up or  
Down Navigation keys to make your selection. Choose from On or Off. Press the Save  
soft key or the  
key to make your selection.  
Dialing display: selects the properties of those items which are part of the display such  
as Font and Color:  
Changing Your Settings 115  
                   
• Font type: selects the font to display. Press the Left or Right Navigation keys to  
make your selection. Choose from Normal, Quill pen, or Sticky note. Press the Save  
soft key or the  
key to make your selection.  
• Font size: selects a size for the selected font. Press the Left or Right Navigation  
keys to make your selection. Choose from Large, Medium, or Small. Press the Save  
soft key or the  
key to make your selection.  
• Font color: selects a color for the selected font. Press the Left or Right Navigation  
keys to make your selection. Choose from Basic, Monochrome, Rainbow, or Gradation.  
Press the Save soft key or the  
key to make your selection.  
• Background Color: selects a color for the background screen. Press the Left or  
Right Navigation keys to make your selection. Choose from the available colors. Press  
the Save soft key or the  
key to make your selection.  
Front display  
Greeting Message: enters the text that displays on the phone’s LCD screen when it  
powers on.  
Font color: sets the color for the text that displays on the phone’s LCD screen when it  
powers on. Color selections are: Blue, Red, and (user-defined) Color 1-4.  
Light settings  
Brightness: adjusts the display brightness for the LCD to see it better in different  
lighting conditions. Press the Left or Right Navigation keys to adjust the brightness.  
Press the Save soft key or the  
key to make your selection.  
Backlight time: selects the amount of time for the backlight to remain on and the  
length of time for the actual dimming to occur. Press the Up or Down Navigation keys to  
make your selection. For On choose from either 10 seconds, 30 seconds, 1 minute,  
3 minute or 10 minutes. For Dim choose from either Off, 5 seconds, 30 seconds,  
1 minute or 3 minutes. Press the Save soft key or the  
key to make your  
selection.  
Keypad light: determines when to use the keypad light. Press the Up or Down  
Navigation keys to make your selection. Choose from either Use at any time, or Use at  
custom time. Press the Save soft key or the  
key to make your selection.  
Shortcut key  
This option allows you to customize the Shortcut key so when you press the key you  
automatically navigate (shortcut) to your favorite application. You can modify the  
shortcut key any time.  
116  
                     
Time & date  
Time & date  
This menu allows you to change the current time and date displayed. You can also  
find out what time it is in another part of the world.  
1. When the Idle mode displays, press the Menu  
soft key.  
2. Select Settings and press the press the Select  
(Left) soft key or the  
key.  
3. Select Time & date and press the Select  
(Left) soft key or the  
key. The following options are available. Use the Down Navigation key  
to scroll to and set options:  
• Time Zone Updating: selects whether the time zone information update is:  
Automatic (which greys-out all other options), Manual only, or Prompt first.  
• Home Zone: enters the assign your current time zone based upon Greenwich  
Mean Time. Major cities in each zone are displayed upon selection. Use the Left  
or Right Navigation key to select a new zone. Press the  
(Left) soft key to save the new selection.  
soft key or the  
Tip: You can also choose to activate Daylight Savings Time within the Home Zone menu option.  
• Time: enters the current time using your keypad. Press the Left or Right  
Navigation key to enter the hour, minute and select AM or PM. Press the Save  
soft key or the  
key to save the new selection.  
• Date: enters the current date using your keypad. Press the Left or Right  
Navigation key to navigate between the month, day, or year fields. Press the  
Save soft key or the  
key to save the new selection.  
• Time format: changes the time format to 12 hours or 24 hours. Use the Left  
or Right Navigation key to select between the two options. Press the Save soft  
key to save the new selection.  
• Date format: changes the date format. Press the  
key to activate the  
option. Use the Up or Down Navigation key to select between the different  
options. Press the OK soft key to change the format. Press the Save soft key to  
save the new selection.  
Note: Automatic updates of time and date do not change the time you set for alarm settings or calendar  
memos.  
Changing Your Settings 117  
                 
Phone settings  
To customize the settings of your phone use the following steps:  
1. When the Idle mode displays, press the Menu  
soft key.  
(Left) soft key or the  
(Left) soft key or the  
2. Select Settings and press the Select  
key.  
3. Select Phone Settings and press the Select  
key.  
The following options are available. Use the Down Navigation key to scroll  
to and set options:  
• Language: selects a display language. You can set the Screen text Language  
or the Input Mode.  
-
Screen Text: selects the phone text. Use the Up or Down Navigation key to  
highlight your selection. Press the OK softkey or the key to make your  
selection. Press the Save soft key to save your new selection. Options include  
Automatic, English, Français and Español.  
-
Input T9: sets the language used when entering text into the phone. Use the Up  
or Down Navigation key to highlight your selection. Press the OK softkey or the  
key to make your selection. Press the Save soft key to save your new  
selection. Options include:  
English: changes the selected phone language to English.  
Français: changes the selected phone language to French.  
Español: changes the selected phone language to Spanish.  
• Own Number: enters a name and number into your phone for easy referral.  
Call Settings  
This menu allows you to change the actions taken by the phone when dialing and  
receiving calls.  
1. When the Idle mode displays, press the Menu  
soft key.  
2. Select Settings and press the Select  
(Left) soft key or the  
(Left) soft key or the  
key.  
3. Select Call Settings and press the Select  
key. The following options are available. Use the Down Navigation key  
to scroll to and set options:  
118  
                 
Call Settings  
All calls  
This allows you to configure some common high level parameters used by the phone  
for most types of calls.  
Show my number: selects how your ID is handled when an outgoing call is initiated.  
Use the Up or Down Navigation key to highlight your selection. Press the  
key to  
make your selection. Press the Save soft key to save your new selection. Options  
include:  
• By network: uses the default network information to identify you to the other  
party.  
• Send: sends your phone number and name to the other party.  
• Hide: hides your identifying information from the other party.  
Auto Block: enables a phone feature which allows you to automatically reject calls  
from a list of contacts. Use the Left or Right Navigation key to toggle the activation of  
this feature. Select Block List and press the  
key to access the list of rejected  
numbers. Press the Options (Left) soft key to select an entry from the list of  
press the Add new soft key to create a new phone entry. Press the OK soft key or the  
key to make your selection. Press the Save soft key to save your new selection.  
Answering mode: selects how your phone answers incoming calls. Use the Up or  
Down Navigation key to highlight your selection. Press the  
key to make your  
selection. Press the Save soft key to save your new selection. Options include:  
• Normal: answers an incoming call by pressing either the Accept soft key or  
the  
key.  
• Any key: answers an incoming call by pressing any key on your phone.  
• Active flip: answers an incoming call by just opening the phone.  
Show caller ID: selects whether your phone displays the caller ID information for the  
incoming call. Use the Left or Right Navigation key to toggle the activation of this  
feature. Press the  
key to make your selection. Press the Save soft key to save  
your new selection. Options include:  
• Activation On/Off: sets whether your phone displays the caller ID for the  
incoming call.  
• with cover display: displays the caller ID on the front LCD.  
Call status tones: activates an alert tone for one of three available status categories.  
Use the Up or Down Navigation key to highlight your selection. Press the  
key to  
make your selection. Press the Save soft key to save your new selection. Options  
include:  
• Call connect tone: activates an alert tone when the connection is made.  
• Minute minder: activates an alert tone which sounds every minute the call  
is active.  
• Call end tone: activates an alert tone when the a connection is terminated.  
Changing Your Settings 119  
                       
Alerts on call: activates an alert tone for new messages being received during an  
active call. Use the Up or Down Navigation key to highlight your selection. Press the  
key to make your selection. Press the Save soft key to save your new selection.  
Options include:  
• Off/On: toggles the activation of this feature. Selecting Off prevents a new  
message alert from sounding while you are on an active call. Selecting On allows  
an alert tone to sound if you receive a new message during an active call.  
Voice Call  
This allows you to configure those phone parameters associated to voice calls.  
Call forwarding: enables incoming calls to reroute to a number that you specify. Use  
the Up or Down Navigation key to highlight your selection. Press the  
key to make  
your selection. Press the Select  
Options include:  
(Left) soft key to save your new selection.  
• Always: forwards Voice Calls. Press the Select  
(Left) soft key and either  
soft key to select a number  
enter the phone number or press the Options  
from your Phonebook. Once you select a number, press the Options  
key and select to either Activate/Deactivate this feature.  
soft  
• If busy: forwards Voice Calls to a designated number instead of your voice mail  
number if you are on another phone call. Press the Select  
(Left) soft key  
soft key to select  
and either enter the phone number or press the Options  
a number from your Phonebook. Once you select a number, press the Options  
soft key and select to either Activate/Deactivate this feature.  
• If no reply: forwards Voice Calls to a designated number instead of your  
voicemail number when there is no answer on your phone. Press the  
Select  
(Left) soft key and either enter the phone number or press the  
soft key to select a number from your Phonebook. Once you  
Options  
select a number, press the Options  
Activate/Deactivate this feature.  
soft key and select to either  
• If out of reach: forwards Voice Calls to a designated number instead of your  
voicemail number when you are not in an area covered by your service provider  
or when your phone is switched off. Press the Select  
(Left) soft key and  
(Left) soft key to select  
either enter the phone number or press the Options  
a number from your Phonebook. Once you select a number, press the  
Options  
soft key and select to either Activate/Deactivate this feature.  
• Cancel all: cancels all Call Forwarding features. Press the Select  
soft key to activate this feature.  
(Left)  
Call barring: allows you to restrict specific types of incoming and outgoing calls on  
your phone. This is useful if you allow someone to use your phone for a short period  
of time.  
120  
               
Connectivity  
Call waiting: informs you when someone is trying to reach you during another call.  
Press the  
key to make your selection. Press the Select  
(Left) soft key to save  
your new selection. Options include:  
• Activate: activates this feature for all Voice Calls. Press the Options  
key to select this option.  
soft  
• Deactivate: deactivates this feature for all Voice Calls. Press the Options  
soft key to select this option.  
• Check Status: checks the status of this feature for all Voice Calls. Press the  
Options soft key to select this option.  
Auto redial: automatically redials the last number if the call was either cut off or you  
were unable to connect. Press the key to make your selection. Press the Save soft  
key to save your new selection. Options include:  
• Off: keeps the phone from automatically redialing the last number if the call was  
disconnected or the call was cut off.  
• On: causes the phone to automatically redial the last number if the call was  
disconnected or the call was cut off.  
Connectivity  
The Connectivity Settings allow you to manage the settings associated with the  
connection types available to your phone, including, Bluetooth, or Network  
connectivity.  
1. When the Idle mode displays, press the Menu  
soft key.  
2. Select Settings and press the Select  
(Left) soft key or the  
key.  
3. Select Connectivity and press the Select  
(Left) soft key or the  
key. Use the Down Navigation key to scroll to and set the Bluetooth or  
Network selection options.  
Configuring your Phone’s Bluetooth Connection  
About Bluetooth  
Bluetooth is a short-range wireless communications technology capable of  
exchanging information over a distance of about 30 feet without requiring a  
physical connection.  
Unlike infrared, you don't need to line up the devices to beam information with  
Bluetooth. If the devices are within a range of one another, you can exchange  
information between them, even if they are located in different rooms.  
The Bluetooth wireless technology settings menu provides the ability to view and  
change the device name, show the visibility, and set the security for the device.  
Changing Your Settings 121  
                   
Turn Bluetooth On/Off  
When the Bluetooth is turned on, you can use the Bluetooth features available. When  
the Bluetooth is turned off, you cannot send or receive information via Bluetooth.  
This option allows you to turn Bluetooth On or Off. Make a selection and press the  
Select  
(Left) soft key or the  
key.  
Note: To save battery life or in situations where Bluetooth use is prohibited, such as airline traveling, you  
can turn off the Bluetooth wireless technology headset.  
My devices  
This option allows you to search and discover new Bluetooth devices.  
1. From the Bluetooth menu items, highlight My devices and press the  
Select  
2. To search for the Bluetooth device(s), highlight Search new device and  
press the Select (Left) soft key or the key.  
Connecting to a Bluetooth Device  
1. From the Device list, highlight the device and press the Select  
soft key or the key.  
2. Enter the PIN for the device.  
(Left) soft key or the  
key.  
(Left)  
If connecting to a Bluetooth wireless device consult your Bluetooth device  
user manual for your assigned PIN.  
If connecting to another handset, enter the same user-defined PIN on both  
handsets.  
Note: The first time you try to pair with a handset, you and the owner of the other handset must enter the  
same PIN. Once the handsets are paired, you do not need to use the PIN again.  
3. Press the Select  
(Left) soft key or the  
key.  
4. If you are unable to pair with the device a popup appears in the display.  
Press the Yes soft key to retry.  
122  
           
Connecting to a Bluetooth Device  
Configuring your Phone’s Bluetooth Visibility  
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its  
phone name and status. This can be useful if you are attempting to connect  
additional Bluetooth devices. Allowing your phone to promote its visibility can pose a  
security risk and incite unauthorized connection. This feature should be paired with a  
Bluetooth security option.  
1. Highlight the option (On/Off) and Select  
(Left) soft key or the  
key.  
Configuring your Phone’s Bluetooth Phones Name  
When your phone’s Bluetooth visibility is turned On, it identifies itself using the name  
entered into this text field. This name can be altered by selecting the pre-existing  
text and selecting a new text string in its place. This feature should be paired with a  
Bluetooth security option.  
1. Press the  
key to erase the previous name.  
2. Use the phone’s keypads to enter a new name. The default input entry  
method is Abc, where the initial character is Uppercase and each  
consecutive character in that same word is left as lowercase text.  
3. Press the Save soft key or the  
key to save the new name.  
Configuring your Phone’s Bluetooth Security Modes  
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its  
phone name and status. This transmission can pose a security risk and incite  
unauthorized connection to your phone. It is recommended that you active your  
phone’s Bluetooth security.  
1. Highlight the option (On/Off) and press the Select  
(Left) soft key or the  
key.  
Bluetooth Features  
Actually, the Bluetooth specification is a protocol that describes how the short-range  
wireless technology works, whereas individual profiles describe the services  
supported by individual devices. Profiles reduce the chance of integration with other  
devices.  
Your phone supports the following profile services:  
Headset: enables both outgoing and incoming calls.  
Handsfree: enables both outgoing and incoming calls.  
Bluetooth stereo headset: enables outgoing and incoming calls via a headset  
equipped with stereo headsets.  
Serial port: establishes data communication via a Serial Port connection.  
Changing Your Settings 123  
       
Dial up: configures the phone as a dial up modem for access to the Internet.  
Basic printing: configures the phone to use Bluetooth technology to enable basic  
printing from the phone. This is useful to print received text message or contact  
information.  
File transfer: configures the phone to transfer data wirelessly to a target device.  
Object push: configures the phone to wirelessly transfer information about Pushes.  
Help  
Help is designed to work with t-zones to show you some of the unique features of  
your phone. You can search help files on the fly while traveling, at home or  
anywhere, using help.wap.t-mobile.com.  
1. In Idle mode, press the Menu  
2. Using the Navigation keys, scroll to the Help icon. Press the Select  
(Left) soft key or the key.  
soft key to access the Menu mode.  
3. The T-Mobile Help menu displays the following options:  
• VoiceMail Help: this options allows you to view the Help topics for VoiceMail  
services.  
• Search: this option allows you to search based on a keyword.  
To access the browser options menu:  
Press the Options  
(Left) soft key.  
Note: The menus may vary, depending on your t-zones subscription.  
Synchronization  
This feature allows you to back up (synchronize) Contact information, Schedules,  
Tasks, and Notes, stored on your phone with your T-Mobile account on the network.  
Each time you edit contact information your phone automatically synchronizes with  
the web Address Book.  
Important!: Synchronization is a service offered to T-Mobile customers. Charges may apply.  
Sync Settings  
This feature allows you to synchronize the Contacts, Schedules, Tasks and Notes to  
the T-Mobile network account.  
1. When the Idle mode displays, press the Menu  
soft key.  
124  
       
Synchronization  
2. Scroll to Organizer using the Navigation keys and press the Select  
(Left) soft key or the key.  
3. Highlight Synchronization and press the Select  
(Left) soft key or the  
key.  
4. Highlight Sync Settings and press the Select  
(Left) soft key or the  
key.  
5. Highlight the item you want to synchronize and press the  
key to place  
a check mark next to the item.  
6. Press the Save  
soft key to return to the PIM sync screen.  
7. Press the  
key to return to Idle mode.  
Sync now  
Once you establish the information you want to synchronize, this feature allows you  
to synchronize with the T-Mobile network.  
1. When the Idle mode displays, press the Menu  
2. Scroll to Organizer using the Navigation keys and press the Select  
(Left) soft key or the key.  
soft key.  
3. Highlight Synchronization and press the Select  
(Left) soft key or the  
key.  
4. Highlight Sync now and press the Select  
(Left) soft key or the  
key.  
5. The information synchronizes with the T-Mobile network and a  
confirmation dialog displays when finished.  
6. Press the  
key to return to Idle mode.  
Viewing the synchronization log  
This feature creates a log of the synchronization activity for viewing.  
1. When the Idle mode displays, press the Menu  
2. Scroll to Organizer using the Navigation keys and press the Select  
(Left) soft key or the key.  
soft key.  
3. Highlight Synchronization and press the Select  
(Left) soft key or the  
key.  
4. Highlight View log and press the Select  
(Left) soft key or the key.  
5. The screen default displays the Contacts sync log.  
Changing Your Settings 125  
6. Press the Right Navigation key to view the logs for Schedule, Task,  
and Note.  
7. Press the Back soft key when you are finished viewing the log.  
8. Press the  
key to return to Idle mode.  
About sync  
This feature displays information about how the synchronization feature works and  
provides a URL for more specific synchronization information.  
Press the More Info soft key to launch the t-zones synchronization  
information.  
Note: Your t-zones feature must be activated by T-Mobile for this feature to work.  
Application Settings  
The Application Settings feature allows you to configure the functional parameters  
for most of the on board applications. These applications are described in more  
detail within other sections of this manual.  
1. When the Idle mode displays, press the Menu  
soft key.  
2. Select Settings and press the Select (Left) soft key or the  
key.  
3. Select Application Settings and press the Select  
(Left) soft key or the  
key.  
4. Select the type of application which you want to change.  
• Camera settings (page 87)  
• Camcorder settings (page 91)  
• Media player settings (page 84)  
• Calendar settings (page 102)  
• Phonebook management (page 50)  
5. Press the Select  
(Left) soft key or the  
key.  
Security  
The Security feature enables you to restrict the use of your phone by the others and  
to restrict the types of calls.  
Various codes and passwords are used to protect the features of your phone.  
1. When the Idle mode displays, press the Menu  
soft key.  
2. Select Settings and press the Select (Left) soft key or the  
key.  
126  
         
Security  
3. Select Security and press the Select  
(Left) soft key or the  
key.  
The following options are available. Use the Up or Down Navigation key to  
scroll to and set options.  
Phone Lock  
When the Phone lock feature is enabled, the phone is locked and you must enter the  
4- to 8-digit phone password each time the phone is switched on. To change the  
phone password, see "Change Phone Password" on page 128. Once the correct  
password is entered, you can use the phone until you switch it off. The following  
options are available:  
Off: you are not asked to enter the phone password when you switch on the phone.  
On: you are required to enter the phone password when you switch on the phone.  
PIN Lock  
When the PIN Lock feature is enabled, you must enter your PIN each time you switch  
on the phone. Consequently, any person who does not have your PIN cannot use  
your phone without your approval.  
Note: Before disabling the PIN Lock feature, you must enter your PIN.  
The following options are available:  
Off the phone connects directly to the network when you switch it on.  
On: you must enter the PIN each time the phone is switched on.  
Lock Applications  
Using this menu, you can lock the following categories:  
All lock  
Messages  
Fun & Apps  
Call records  
Phonebook  
Calendar  
Notes  
IM  
Tasks  
Once you lock the contents, you must enter the phone’s password to access the  
associated menus.  
Changing Your Settings 127  
     
FDN mode  
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict  
your outgoing calls to a limited set of phone numbers.  
The following options are available:  
Off: you can call any number.  
On: you can only call phone numbers stored in Phone book. You must enter your  
PIN2. The following options are available:  
Full length entries or wild cards can be entered in to the FDN list.  
A full length number with a specific contact name can be entered into the FDN list.  
Wildcard entries allow a range of numbers to dial with a single entry: ex. 555 – All  
dialed numbers that begin with 555 are allowed. Numbers that do not match the  
conditions in the FDN list are restricted.  
Note: Entering an asterisk (*) is not required for wild card entries.  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.  
Change Phone Password  
The Change phone password feature allows you to change your current phone  
password to a new one. You must enter the current password before you can specify  
a new one.  
Once you enter a new password, you are asked to confirm it by entering it again.  
Change PIN Code  
This feature allows you to change your current PIN, provided that the PIN Lock  
feature is enabled. You must enter the current PIN before you can specify a new one.  
Once you enter a new PIN, you are asked to confirm by entering the PIN a second  
time.  
Change PIN2 Code  
The Change PIN2 feature allows you to change your current PIN2 to a new one. You  
must enter the current PIN2 before you can specify a new one. Once you enter a new  
PIN2, you are asked to confirm by entering the PIN2 a second time.  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.  
128  
         
Software Update  
Software Update  
The Software Update feature enables you to use your phone to connect to the  
network and upload any new phone software directly to your phone.  
1. When the Idle mode displays, press the Menu  
soft key.  
2. Select Settings and press the Select (Left) soft key or the  
key.  
3. Select Software Update and press the Select  
(Left) soft key or the  
key.  
4. Press the  
instructions.  
key to continue the update process and follow the on screen  
Reset settings  
You can easily reset your phone to its default settings. To reset your phone:  
1. When the Idle mode displays, press the Menu soft key.  
2. Select Settings and press the Select (Left) soft key or the  
(Left) soft key or the  
key.  
3. Select Reset settings and press the Select  
key.  
4. Use the Up or Down Navigation key to scroll to and set options. The  
following options are available:  
• All  
• Phone settings  
• Display settings  
• Sound profiles  
• Alarm  
5. Press the  
key to make your selection and press the OK soft key.  
6. Enter your phone password, if prompted and press the Confirm soft key.  
7. At the “Reset Settings?prompt, press the Yes soft key to reset, or the  
No soft key to cancel. Once your phone is reset to its default settings for  
those selected options, it restarts in order to incorporate the new settings.  
Changing Your Settings 129  
       
Memory settings  
You can easily check the amount of memory being used for storing data, such as Fun  
& Apps, Messages, Phonebook, Calendar, Tasks, Notes, and Activate key. You can  
also delete any selected information from your phone:  
1. When the Idle mode displays, press the Menu  
soft key.  
2. Select Settings and press the Select (Left) soft key or the  
key.  
3. Select Memory settings and press the Select  
(Left) soft key or the  
key.  
4. The following options are available. Use the Up or Down Navigation key to  
scroll to and set options. Choose from the following:  
• Clear memory  
• Memory status  
Clearing Memory  
1. Highlight Clear Memory and press the Select  
(Left) soft key or the  
key.  
2. Highlight All and press the  
key to select all available categories.  
You can remove the check mark by pressing the  
places a checkmark adjacent to every entry in the list.  
-OR-  
twice. Selecting All  
3. Highlight a specific category and press the  
key to select it.  
4. Press the OK soft key.  
5. Enter your password (if applicable) and press the Confirm soft key.  
Depending on your phone’s security settings, you may be asked to enter  
your password a second time.  
6. At the Clear? confirm screen, press the Yes soft key to continue, or the No  
soft key to cancel.  
7. Press the  
key to return to Idle mode.  
130  
     
Memory settings  
Checking the Memory Status  
1. Highlight Memory Status and press the Select  
(Left) soft key or the  
(Left) soft key or the  
key.  
2. Highlight the storage category and the Select  
key. Choose from one of the following categories:  
• Shared memory  
• Messages  
• Fun & Apps  
• Calendar  
Tasks  
• Notes  
Phonebook  
3. Press the Up or Down navigation key to select the entry and press the  
Select  
(Left) soft key to view the contents of a category’s memory.  
4. Press the  
key to return to Idle mode.  
Changing Your Settings 131  
 
Section 12: Health and Safety Information  
Topics Covered  
This section outlines the safety precautions associated with using your phone. These  
safety precautions should be followed to safely use your phone.  
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
Your wireless phone is a radio transmitter and receiver. It is designed and  
manufactured not to exceed the exposure limits for radio frequency (RF) energy set  
by the Federal Communications Commission (FCC) of the U.S. government.  
132  
     
Health and Safety Information  
These FCC exposure limits are derived from the recommendations of two expert  
organizations, the National Counsel on Radiation Protection and Measurement  
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,  
the recommendations were developed by scientific and engineering experts drawn  
from industry, government, and academia after extensive reviews of the scientific  
literature related to the biological effects of RF energy.  
The exposure limit set by the FCC for wireless mobile phones employs a unit of  
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of  
the rate of absorption of RF energy by the human body expressed in units of watts  
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit  
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a  
substantial margin of safety to give additional protection to the public and to account  
for any variations in measurements.  
SAR tests are conducted using standard operating positions accepted by the FCC  
with the phone transmitting at its highest certified power level in all tested frequency  
bands. Although the SAR is determined at the highest certified power level, the  
actual SAR level of the phone while operating can be well below the maximum value.  
This is because the phone is designed to operate at multiple power levels so as to  
use only the power required to reach the network. In general, the closer you are to a  
wireless base station antenna, the lower the power output.  
Before a new model phone is available for sale to the public, it must be tested and  
certified to the FCC that it does not exceed the exposure limit established by the  
FCC. Tests for each model phone are performed in positions and locations (e.g. at  
the ear and worn on the body) as required by the FCC. For body worn operation, this  
phone has been tested and meets FCC RF exposure guidelines when used with an  
accessory that contains no metal and that positions the handset a minimum of  
1.5 cm from the body. Use of other accessories may not ensure compliance with FCC  
RF exposure guidelines.  
The FCC has granted an Equipment Authorization for this mobile phone with all  
reported SAR levels evaluated as in compliance with the FCC RF exposure  
guidelines. The maximum SAR values for this model phone as reported to the FCC  
are:  
Head: 1.470 W/Kg.  
Body-worn: 0.417 W/Kg.  
Health and Safety Information 133  
SAR information on this and other model phones can be viewed on-line at  
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model  
phone, this site uses the phone FCC ID number which is usually printed somewhere  
on the case of the phone.  
Sometimes it may be necessary to remove the battery pack to find the number. Once  
you have the FCC ID number for a particular phone, follow the instructions on the  
website and it should provide values for typical or maximum SAR for a particular  
phone. Additional product specific SAR information can also be obtained at  
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its customers to recycle  
Samsung mobile phones and genuine Samsung accessories.  
UL Certified Travel Adapter  
The Travel Adapter for this phone has met applicable UL safety requirements. Please  
adhere to the following safety instructions per UL guidelines.  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS  
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW  
THESE INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT  
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS  
POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR  
HORIZONTAL OR FLOOR MOUNT POSITION.  
Consumer Information on Wireless Phones  
The U.S. Food and Drug Administration (FDA) has published a series of Questions  
and Answers for consumers relating to radio frequency (RF) exposure from wireless  
phones. The FDA publication includes the following information:  
134  
     
Consumer Information on Wireless Phones  
What kinds of phones are the subject of this update?  
The term wireless phone refers here to hand-held wireless phones with built-in  
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless  
phones can expose the user to measurable radio frequency energy (RF) because of  
the short distance between the phone and the user's head. These RF exposures are  
limited by Federal Communications Commission safety guidelines that were  
developed with the advice of FDA and other federal health and safety agencies.  
When the phone is located at greater distances from the user, the exposure to RF is  
drastically lower because a person's RF exposure decreases rapidly with increasing  
distance from the source. The so-called "cordless phones," which have a base unit  
connected to the telephone wiring in a house, typically operate at far lower power  
levels, and thus produce RF exposures well within the FCC's compliance limits.  
Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any health problems are  
associated with using wireless phones. There is no proof, however, that wireless  
phones are absolutely safe. Wireless phones emit low levels of radio frequency  
energy (RF) in the microwave range while being used. They also emit very low levels  
of RF when in the stand-by mode. Whereas high levels of RF can produce health  
effects (by heating tissue), exposure to low level RF that does not produce heating  
effects causes no known adverse health effects. Many studies of low level RF  
exposures have not found any biological effects. Some studies have suggested that  
some biological effects may occur, but such findings have not been confirmed by  
additional research. In some cases, other researchers have had difficulty in  
reproducing those studies, or in determining the reasons for inconsistent results.  
What is FDA's role concerning the safety of wireless  
phones?  
Under the law, FDA does not review the safety of radiation-emitting consumer  
products such as wireless phones before they can be sold, as it does with new drugs  
or medical devices. However, the agency has authority to take action if wireless  
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to  
the user. In such a case, FDA could require the manufacturers of wireless phones to  
notify users of the health hazard and to repair, replace or recall the phones so that  
the hazard no longer exists.  
Health and Safety Information 135  
Although the existing scientific data do not justify FDA regulatory actions, FDA has  
urged the wireless phone industry to take a number of steps, including the following:  
Support needed research into possible biological effects of RF of the type emitted  
by wireless phones;  
Design wireless phones in a way that minimizes any RF exposure to the user that  
is not necessary for device function; and  
Cooperate in providing users of wireless phones with the best possible information  
on possible effects of wireless phone use on human health.  
FDA belongs to an interagency working group of the federal agencies that have  
responsibility for different aspects of RF safety to ensure coordinated efforts at the  
federal level. The following agencies belong to this working group:  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency working group  
activities, as well.  
FDA shares regulatory responsibilities for wireless phones with the Federal  
Communications Commission (FCC). All phones that are sold in the United States  
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA  
and other health agencies for safety questions about wireless phones.  
FCC also regulates the base stations that the wireless phone networks rely upon.  
While these base stations operate at higher power than do the wireless phones  
themselves, the RF exposures that people get from these base stations are typically  
thousands of times lower than those they can get from wireless phones. Base  
stations are thus not the primary subject of the safety questions discussed in this  
document.  
136  
Consumer Information on Wireless Phones  
What are the results of the research done already?  
The research done thus far has produced conflicting results, and many studies have  
suffered from flaws in their research methods. Animal experiments investigating the  
effects of radio frequency energy (RF) exposures characteristic of wireless phones  
have yielded conflicting results that often cannot be repeated in other laboratories. A  
few animal studies, however, have suggested that low levels of RF could accelerate  
the development of cancer in laboratory animals. However, many of the studies that  
showed increased tumor development used animals that had been genetically  
engineered or treated with cancer-causing chemicals so as to be pre-disposed to  
develop cancer in absence of RF exposure. Other studies exposed the animals to RF  
for up to 22 hours per day. These conditions are not similar to the conditions under  
which people use wireless phones, so we don't know with certainty what the results  
of such studies mean for human health.  
Three large epidemiology studies have been published since December 2000.  
Between them, the studies investigated any possible association between the use of  
wireless phones and primary brain cancer, glioma, meningioma, or acoustic  
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of  
the studies demonstrated the existence of any harmful health effects from wireless  
phones RF exposures. However, none of the studies can answer questions about  
long-term exposures, since the average period of phone use in these studies was  
around three years.  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
A combination of laboratory studies and epidemiological studies of people actually  
using wireless phones would provide some of the data that are needed. Lifetime  
animal exposure studies could be completed in a few years. However, very large  
numbers of animals would be needed to provide reliable proof of a cancer promoting  
effect if one exists. Epidemiological studies can provide data that is directly  
applicable to human populations, but ten or more years' follow-up may be needed to  
provide answers about some health effects, such as cancer. This is because the  
interval between the time of exposure to a cancer-causing agent and the time  
tumors develop - if they do - may be many, many years. The interpretation of  
epidemiological studies is hampered by difficulties in measuring actual RF exposure  
during day-to-day use of wireless phones. Many factors affect this measurement,  
such as the angle at which the phone is held, or which model of phone is used.  
Health and Safety Information 137  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology Program and with groups of  
investigators around the world to ensure that high priority animal studies are  
conducted to address important questions about the effects of exposure to radio  
frequency energy (RF).  
FDA has been a leading participant in the World Health Organization international  
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result  
of this work has been the development of a detailed agenda of research needs that  
has driven the establishment of new research programs around the world. The  
Project has also helped develop a series of public information documents on EMF  
issues.  
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal  
Cooperative Research and Development Agreement (CRADA) to do research on  
wireless phone safety. FDA provides the scientific oversight, obtaining input from  
experts in government, industry, and academic organizations. CTIA-funded research  
is conducted through contracts to independent investigators. The initial research will  
include both laboratory studies and studies of wireless phone users. The CRADA will  
also include a broad assessment of additional research needs in the context of the  
latest research developments around the world.  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
If there is a risk from these products - and at this point we do not know that there is  
- it is probably very small. But if you are concerned about avoiding even potential  
risks, you can take a few simple steps to minimize your exposure to radio frequency  
energy (RF). Since time is a key factor in how much exposure a person receives,  
reducing the amount of time spent using a wireless phone will reduce RF exposure.  
If you must conduct extended conversations by wireless phone every day, you  
could place more distance between your body and the source of the RF, since the  
exposure level drops off dramatically with distance. For example, you could use a  
headset and carry the wireless phone away from your body or use a wireless  
phone connected to a remote antenna.  
Again, the scientific data do not demonstrate that wireless phones are harmful. But if  
you are concerned about the RF exposure from these products, you can use  
measures like those described above to reduce your RF exposure from wireless  
phone use.  
138  
Consumer Information on Wireless Phones  
What about children using wireless phones?  
The scientific evidence does not show a danger to users of wireless phones,  
including children and teenagers. If you want to take steps to lower exposure to  
radio frequency energy (RF), the measures described above would apply to children  
and teenagers using wireless phones. Reducing the time of wireless phone use and  
increasing the distance between the user and the RF source will reduce RF  
exposure.  
Some groups sponsored by other national governments have advised that children  
be discouraged from using wireless phones at all. For example, the government in  
the United Kingdom distributed leaflets containing such a recommendation in  
December 2000. They noted that no evidence exists that using a wireless phone  
causes brain tumors or other ill effects. Their recommendation to limit wireless  
phone use by children was strictly precautionary; it was not based on scientific  
evidence that any health hazard exists.  
Do hands-free kits for wireless phones reduce  
risks from exposure to RF emissions?  
Since there are no known risks from exposure to RF emissions from wireless  
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free  
kits can be used with wireless phones for convenience and comfort. These systems  
reduce the absorption of RF energy in the head because the phone, which is the  
source of the RF emissions, will not be placed against the head. On the other hand, if  
the phone is mounted against the waist or other part of the body during use, then  
that part of the body will absorb more RF energy. Wireless phones marketed in the  
U.S. are required to meet safety requirements regardless of whether they are used  
against the head or against the body. Either configuration should result in  
compliance with the safety limit.  
Do wireless phone accessories that claim to shield  
the head from RF radiation work?  
Since there are no known risks from exposure to RF emissions from wireless  
phones, there is no reason to believe that accessories that claim to shield the head  
from those emissions reduce risks. Some products that claim to shield the user from  
RF absorption use special phone cases, while others involve nothing more than a  
metallic accessory attached to the phone. Studies have shown that these products  
generally do not work as advertised. Unlike "hand-free" kits, these so-called  
"shields" may interfere with proper operation of the phone. The phone may be  
forced to boost its power to compensate, leading to an increase in RF absorption.  
Health and Safety Information 139  
In February 2002, the Federal trade Commission (FTC) charged two companies that  
sold devices that claimed to protect wireless phone users from radiation with  
making false and unsubstantiated claims. According to FTC, these defendants  
lacked a reasonable basis to substantiate their claim.  
What about wireless phone interference with  
medical equipment?  
Radio frequency energy (RF) from wireless phones can interact with some electronic  
devices. For this reason, FDA helped develop a detailed test method to measure  
electromagnetic interference (EMI) of implanted cardiac pacemakers and  
defibrillators from wireless telephones. This test method is now part of a standard  
sponsored by the Association for the Advancement of Medical instrumentation  
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and  
many other groups, was completed in late 2000. This standard will allow  
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from  
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary  
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This  
standard specifies test methods and performance requirements for hearing aids and  
wireless phones so that no interference occurs when a person uses a compatible  
phone and a compatible hearing aid at the same time. This standard was approved  
by the IEEE in 2000.  
FDA continues to monitor the use of wireless phones for possible interactions with  
other medical devices. Should harmful interference be found to occur, FDA will  
conduct testing to assess the interference and work to resolve the problem.  
Additional information on the safety of RF exposures from various sources can be  
obtained from the following organizations (Updated 12/1/2006):  
FCC RF Safety Program:  
Environmental Protection Agency (EPA):  
Occupational Safety and Health Administration's (OSHA):  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
140  
Road Safety  
International Commission on Non-Ionizing Radiation Protection:  
National Radiation Protection Board (UK):  
US Food and Drug Administration  
Road Safety  
Your wireless phone gives you the powerful ability to communicate by voice, almost  
anywhere, anytime. But an important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility. When using your wireless  
phone behind the wheel of a car, practice good common sense and remember the  
following tips:  
1. Get to know your wireless phone and its features, such as speed dial and  
redial. If available, these features help you to place your call without taking  
your attention off the road.  
2. When available, use a hands-free device. If possible, add an additional  
layer of convenience and safety to your wireless phone with one of the  
many hands free accessories available today.  
3. Position your wireless phone within easy reach. Be able to access your  
wireless phone without removing your eyes from the road. If you get an  
incoming call at an inconvenient time, let your voice mail answer it for you.  
4. Let the person you are speaking with know you are driving; if necessary,  
suspend the call in heavy traffic or hazardous weather conditions. Rain,  
sleet, snow, ice and even heavy traffic can be hazardous.  
5. Do not take notes or look up phone numbers while driving. Jotting down a  
"to do" list or flipping through your address book takes attention away  
from your primary responsibility, driving safely.  
6. Dial sensibly and assess the traffic; if possible, place calls when you are  
not moving or before pulling into traffic. Try to plan calls when your car will  
be stationary. If you need to make a call while moving, dial only a few  
numbers, check the road and your mirrors, then continue.  
Health and Safety Information 141  
 
7. Do not engage in stressful or emotional conversations that may be  
distracting. Make people you are talking with aware you are driving and  
suspend conversations that have the potential to divert your attention from  
the road.  
8. Use your wireless phone to call for help. Dial 9-1-1 or other local  
emergency number in the case of fire, traffic accident or medical  
emergencies. Remember, it is a free call on your wireless phone!  
9. Use your wireless phone to help others in emergencies. If you see an auto  
accident, crime in progress or other serious emergency where lives are in  
danger, call 9-1-1 or other local emergency number, as you would want  
others to do for you.  
10. Call roadside assistance or a special non-emergency wireless assistance  
number when necessary. If you see a broken-down vehicle posing no  
serious hazard, a broken traffic signal, a minor traffic accident where no  
one appears injured, or a vehicle you know to be stolen, call roadside  
assistance or other special non-emergency number.  
"The wireless industry reminds you to use your phone safely when driving."  
For more information, please call 1-888-901-SAFE, or visit our web-site  
Important!: If you are using a handset other than a standard numeric keypad, please call 1-888-901-7233.  
Provided by the Cellular Telecommunications & Internet Association.  
Responsible Listening  
Caution!: Avoid potential hearing loss.  
Damage to hearing occurs when a person is exposed to loud sounds over time. The  
risk of hearing loss increases as sound is played louder and for longer durations.  
Prolonged exposure to loud sounds (including music) is the most common cause of  
preventable hearing loss. Some scientific research suggests that using portable  
audio devices, such as portable music players and cellular telephones, at high  
volume settings for long durations may lead to permanent noise-induced hearing  
loss. This includes the use of headphones (including headsets, earbuds, and  
Bluetooth or other wireless devices). Exposure to very loud sound has also been  
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to  
sound and distorted hearing.  
142  
 
Responsible Listening  
Individual susceptibility to noise-induced hearing loss and potential hearing problem  
varies. Additionally, the amount of sound produced by a portable audio device varies  
depending on the nature of the sound, the device settings, and the headphones that  
are used. As a result, there is no single volume setting that is appropriate for  
everyone or for every combination of sound, settings and equipment.  
You should follow some commonsense recommendations when using any portable  
audio device:  
Set the volume in a quiet environment and select the lowest volume at which you  
can hear adequately.  
When using headphones, turn the volume down if you cannot hear the people  
speaking near you or if the person sitting next to you can hear what you are  
listening to.  
Do not turn the volume up to block out noisy surroundings. If you choose to listen  
to your portable device in a noisy environment, you noise-cancelling headphones  
to block out background environmental noise. By blocking background  
environment noise, noise cancelling headphones should allow you to hear the  
music at lower volumes than when using earbuds.  
Limit the amount of time you listen. As the volume increases, less time is required  
before you hearing could be affected.  
Avoid using headphones after exposure to extremely loud noises, such as rock  
concerts, that might cause temporary hearing loss. Temporary hearing loss might  
cause unsafe volumes to sound normal.  
Do not listen at any volume that causes you discomfort. If you experience ringing in  
your ears, hear muffled speech or experience any temporary hearing difficulty  
after listening to your portable audio device, discontinue use and consult your  
doctor.  
You can obtain additional information on this subject from the following sources:  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Voice: (800) 222-2336  
Internet: www.audiology.org  
Health and Safety Information 143  
National Institute on Deafness and Other Communication Disorders  
National Institutes of Health  
31 Center Drive, MSC 2320  
Bethesda, MD 20892-2320  
Voice: (301) 496-7243  
Internet: http://www.cdc.gov/niosh/topics/noise/default.html  
National Institute for Occupational Safety and Health  
Hubert H. Humphrey Bldg.  
200 Independence Ave., SW  
Washington, DC 20201  
Voice: 1-800-35-NIOSH (1-800-356-4647)  
Internet: http://www.cdc.gov/niosh/topics/noise/default.html  
Operating Environment  
Remember to follow any special regulations in force in any area and always switch  
your phone off whenever it is forbidden to use it, or when it may cause interference  
or danger. When connecting the phone or any accessory to another device, read its  
user's guide for detailed safety instructions. Do not connect incompatible products.  
As with other mobile radio transmitting equipment, users are advised that for the  
satisfactory operation of the equipment and for the safety of personnel, it is  
recommended that the equipment should only be used in the normal operating  
position (held to your ear with the antenna pointing over your shoulder if you are  
using an external antenna).  
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from radio frequency (RF) signals.  
However, certain electronic equipment may not be shielded against the RF signals  
from your wireless phone. Consult the manufacturer to discuss alternatives.  
144  
   
Using Your Phone Near Other Electronic Devices  
Implantable Medical Devices  
A minimum separation of six (6) inches should be maintained between a handheld  
wireless phone and an implantable medical device, such as a pacemaker or  
implantable cardioverter defibrillator, to avoid potential interference with the device.  
Persons who have such devices:  
Should ALWAYS keep the phone more than six (6) inches from their implantable  
medical device when the phone is turned ON;  
Should not carry the phone in a breast pocket;  
Should use the ear opposite the implantable medical device to minimize the  
potential for interference;  
Should turn the phone OFF immediately if there is any reason to suspect that  
interference is taking place.  
Should read and follow the directions from the manufacturer of your implantable  
medical device. if you have any questions about using your wireless phone with  
such a device, consult your health care provider.  
Hearing Aids  
Some digital wireless phones may interfere with some hearing aids. In the event of  
such interference, you may wish to consult your hearing aid manufacturer to discuss  
alternatives.  
Other Medical Devices  
If you use any other personal medical devices, consult the manufacturer of your  
device to determine if it is adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this information. Switch your phone  
off in health care facilities when any regulations posted in these areas instruct you to  
do so. Hospitals or health care facilities may be using equipment that could be  
sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic  
systems in motor vehicles. Check with the manufacturer or its representative  
regarding your vehicle. You should also consult the manufacturer of any equipment  
that has been added to your vehicle.  
Posted Facilities  
Switch your phone off in any facility where posted notices require you to do so.  
Health and Safety Information 145  
Potentially Explosive Environments  
Switch your phone off when in any area with a potentially explosive atmosphere and  
obey all signs and instructions. Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death.  
Users are advised to switch the phone off while at a refueling point (service station).  
Users are reminded of the need to observe restrictions on the use of radio equipment  
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting  
operations are in progress.  
Areas with a potentially explosive atmosphere are often but not always clearly  
marked. They include below deck on boats, chemical transfer or storage facilities,  
vehicles using liquefied petroleum gas (such as propane or butane), areas where the  
air contains chemicals or particles, such as grain, dust or metal powders, and any  
other area where you would normally be advised to turn off your vehicle engine.  
Emergency Calls  
This phone, like any wireless phone, operates using radio signals, wireless and  
landline networks as well as user-programmed functions, which cannot guarantee  
connection in all conditions. Therefore, you should never rely solely on any wireless  
phone for essential communications (medical emergencies, for example).  
Remember, to make or receive any calls the phone must be switched on and in a  
service area with adequate signal strength. Emergency calls may not be possible on  
all wireless phone networks or when certain network services and/or phone features  
are in use. Check with local service providers.  
To make an emergency call:  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present location (for example, 911  
or other official emergency number). Emergency numbers vary by location.  
3. Press the  
key.  
If certain features are in use (call barring, for example), you may first need to  
deactivate those features before you can make an emergency call. Consult this  
document and your local cellular service provider.  
When making an emergency call, remember to give all the necessary information as  
accurately as possible. Remember that your phone may be the only means of  
communication at the scene of an accident; do not cut off the call until given  
permission to do so.  
146  
   
FCC Notice and Cautions  
Restricting Children's access to your Phone  
Your phone is not a toy. Children should not be allowed to play with it because they  
could hurt themselves and others, damage the phone or make calls that increase  
your phone bill.  
FCC Notice and Cautions  
FCC Notice  
The phone may cause TV or radio interference if used in close proximity to receiving  
equipment. The FCC can require you to stop using the phone if such interference  
cannot be eliminated.  
Vehicles using liquefied petroleum gas (such as propane or butane) must comply  
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,  
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA  
02269, Attn: Publication Sales Division.  
Cautions  
Any changes or modifications to your phone not expressly approved in this  
document could void your warranty for this equipment, and void your authority to  
operate this equipment. Only use approved batteries, antennas and chargers. The  
use of any unauthorized accessories may be dangerous and void the phone warranty  
if said accessories cause damage or a defect to the phone.  
Although your phone is quite sturdy, it is a complex piece of equipment and can be  
broken. Avoid dropping, hitting, bending or sitting on it.  
Other Important Safety Information  
Only qualified personnel should service the phone or install the phone in a vehicle.  
Faulty installation or service may be dangerous and may invalidate any warranty  
applicable to the device.  
Check regularly that all wireless phone equipment in your vehicle is mounted and  
operating properly.  
Do not store or carry flammable liquids, gases or explosive materials in the same  
compartment as the phone, its parts or accessories.  
For vehicles equipped with an air bag, remember that an air bag inflates with great  
force. Do not place objects, including both installed or portable wireless equipment  
in the area over the air bag or in the air bag deployment area. If wireless  
equipment is improperly installed and the air bag inflates, serious injury could  
result.  
Health and Safety Information 147  
   
Switch your phone off before boarding an aircraft. The use of wireless phone in  
aircraft is illegal and may be dangerous to the aircraft's operation.  
Failure to observe these instructions may lead to the suspension or denial of  
telephone services to the offender, or legal action, or both.  
Product Performance  
Getting the Most Out of Your Signal Reception  
The quality of each call you make or receive depends on the signal strength in your  
area. Your phone informs you of the current signal strength by displaying a number  
of bars next to the signal strength icon. The more bars displayed, the stronger the  
signal.  
If you're inside a building, being near a window may give you better reception.  
Understanding the Power Save Feature  
If your phone is unable to find a signal after searching, a Power Save feature is  
automatically activated. If your phone is active, it periodically rechecks service  
availability or you can check it yourself by pressing any key.  
Anytime the Power Save feature is activated, a message displays on the screen.  
When a signal is found, your phone returns to standby mode.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it's turned on, it  
receives and transmits radio frequency (RF) signals. When you use your phone, the  
system handling your call controls the power level. This power can range from 0.006  
watts to 0.2 watts in digital mode.  
Maintaining Your Phone's Peak Performance  
For the best care of your phone, only authorized personnel should service your  
phone and accessories. Faulty service may void the warranty.  
There are several simple guidelines to operating your phone properly and  
maintaining safe, satisfactory service.  
If your phone is equipped with an external antenna, hold the phone with the  
antenna raised, fully-extended and over your shoulder.  
Do not hold, bend or twist the phone's antenna, if applicable.  
Do not use the phone if the antenna is damaged.  
If your phone is equipped with an internal antenna, obstructing the internal  
antenna could inhibit call performance.  
Speak directly into the phone's receiver.  
148  
 
Availability of Various Features/Ring Tones  
Avoid exposing your phone and accessories to rain or liquid spills. If your phone  
does get wet, immediately turn the power off and remove the battery. If it is  
inoperable, call Customer Care for service.  
Availability of Various Features/Ring Tones  
Many services and features are network dependent and may require additional  
subscription and/or usage charges. Not all features are available for purchase or use  
in all areas. Downloadable Ring Tones may be available at an additional cost. Other  
conditions and restrictions may apply. See your service provider for additional  
information.  
Battery Standby and Talk Time  
Standby and talk times will vary depending on phone usage patterns and conditions.  
Battery power consumption depends on factors such as network configuration,  
signal strength, operating temperature, features selected, frequency of calls, and  
voice, data, and other application usage patterns.  
Battery Precautions  
Avoid dropping the cell phone. Dropping it, especially on a hard surface, can  
potentially cause damage to the phone and battery. If you suspect damage to the  
phone or battery, take it to a service center for inspection.  
Never use any charger or battery that is damaged in any way.  
Do not modify or remanufacture the battery as this could result in serious safety  
hazards.  
If you use the phone near the network's base station, it uses less power; talk and  
standby time are greatly affected by the signal strength on the cellular network  
and the parameters set by the network operator.  
Follow battery usage, storage and charging guidelines found in the user’s guide.  
Battery charging time depends on the remaining battery charge and the type of  
battery and charger used. The battery can be charged and discharged hundreds of  
times, but it will gradually wear out. When the operation time (talk time and  
standby time) is noticeably shorter than normal, it is time to buy a new battery.  
If left unused, a fully charged battery will discharge itself over time.  
Use only Samsung-approved batteries and recharge your battery only with  
Samsung-approved chargers. When a charger is not in use, disconnect it from the  
power source. Do not leave the battery connected to a charger for more than a  
week, since overcharging may shorten its life.  
Health and Safety Information 149  
     
Do not use incompatible cell phone batteries and chargers. Some Web sites and  
second-hand dealers, not associated with reputable manufacturers and carriers,  
might be selling incompatible or even counterfeit batteries and chargers.  
Consumers should purchase manufacturer or carrier recommended products and  
accessories. If unsure about whether a replacement battery or charger is  
compatible, contact the manufacturer of the battery or charger.  
Misuse or use of incompatible phones, batteries, and charging devices could result  
in damage to the equipment and a possible risk of fire, explosion, leakage, or other  
serious hazard.  
Extreme temperatures will affect the charging capacity of your battery: it may  
require cooling or warming first.  
Do not leave the battery in hot or cold places, such as in a car in summer or winter  
conditions, as you will reduce the capacity and lifetime of the battery. Always try to  
keep the battery at room temperature. A phone with a hot or cold battery may  
temporarily not work, even when the battery is fully charged. Li-ion batteries are  
particularly affected by temperatures below 0 °C (32 °F).  
Do not place the phone in areas that may get very hot, such as on or near a  
cooking surface, cooking appliance, iron, or radiator.  
Do not get your phone or battery wet. Even though they will dry and appear to  
operate normally, the circuitry could slowly corrode and pose a safety hazard.  
Do not short-circuit the battery. Accidental short-circuiting can occur when a  
metallic object (coin, clip or pen) causes a direct connection between the + and -  
terminals of the battery (metal strips on the battery), for example when you carry a  
spare battery in a pocket or bag. Short-circuiting the terminals may damage the  
battery or the object causing the short-circuiting.  
Do not permit a battery out of the phone to come in contact with metal objects,  
such as coins, keys or jewelry.  
Do not crush, puncture or put a high degree of pressure on the battery as this can  
cause an internal short-circuit, resulting in overheating.  
Dispose of used batteries in accordance with local regulations. In some areas, the  
disposal of batteries in household or business trash may be prohibited. For safe  
disposal options for Li-Ion batteries, contact your nearest Samsung authorized  
service center. Always recycle. Do not dispose of batteries in a fire.  
150  
Care and Maintenance  
Care and Maintenance  
Your phone is a product of superior design and craftsmanship and should be treated  
with care. The suggestions below will help you fulfill any warranty obligations and  
allow you to enjoy this product for many years.  
Keep the phone and all its parts and accessories out of the reach of small children.  
Keep the phone dry. Precipitation, humidity and liquids contain minerals that will  
corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an electric shock to  
you or damage to the phone.  
Do not use or store the phone in dusty, dirty areas, as its moving parts may be  
damaged.  
Do not store the phone in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store the phone in cold areas. When the phone warms up to its normal  
operating temperature, moisture can form inside the phone, which may damage  
the phone's electronic circuit boards.  
Do not drop, knock or shake the phone. Rough handling can break internal circuit  
boards.  
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the  
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water  
solution.  
Do not paint the phone. Paint can clog the device's moving parts and prevent  
proper operation.  
Do not put the phone in or on heating devices, such as a microwave oven, a stove  
or a radiator. The phone may explode when overheated.  
If your phone is equipped with an external antenna, use only the supplied or an  
approved replacement antenna. Unauthorized antennas or modified accessories  
may damage the phone and violate regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working properly, take it to  
your nearest qualified service facility. The personnel there will assist you, and if  
necessary, arrange for service.  
Health and Safety Information 151  
 
Section 13: Warranty Information  
Topics Covered  
Standard Limited Warranty  
What is Covered and For How Long? SAMSUNG  
TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original  
purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are  
free from defects in material and workmanship under normal use and service for the  
period commencing upon the date of purchase and continuing for the following  
specified period of time after that date:  
Phone  
1 Year  
1 Year  
Batteries  
Leather Case/ Pouch  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon proper use of  
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage  
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or  
electromechanical stress, or modification of any part of Product, including antenna,  
or cosmetic damage; (b) equipment that has the serial number removed or made  
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched  
or damaged due to normal use; (d) malfunctions resulting from the use of Product in  
conjunction with accessories, products, or ancillary/peripheral equipment not  
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,  
operation, maintenance, installation, or adjustment; (f) installation, maintenance,  
and service of Product, or (g) Product used or purchased outside the United States or  
Canada.  
152  
       
Standard Limited Warranty  
This Limited Warranty covers batteries only if battery capacity falls below 80% of  
rated capacity or the battery leaks, and this Limited Warranty does not cover any  
battery if (i) the battery has been charged by a battery charger not specified or  
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery  
are broken or show evidence of tampering, or (iii) the battery has been used in  
equipment other than the SAMSUNG phone for which it is specified.  
What are SAMSUNG's Obligations? During the applicable warranty period,  
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to  
Purchaser, any defective component part of Product. To obtain service under this  
Limited Warranty, Purchaser must return Product to an authorized phone service  
facility in an adequate container for shipping, accompanied by Purchaser's sales  
receipt or comparable substitute proof of sale showing the date of purchase, the  
serial number of Product and the sellers' name and address. To obtain assistance on  
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.  
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.  
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts  
or components when repairing any Product or replace Product with a rebuilt,  
reconditioned or new Product. Repaired/replaced leather cases, pouches and  
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced  
Product will be warranted for a period equal to the remainder of the original Limited  
Warranty on the original Product or for 90 days, whichever is longer. All replaced  
parts, components, boards and equipment shall become the property of SAMSUNG.  
If SAMSUNG determines that any Product is not covered by this Limited Warranty,  
Purchaser must pay all parts, shipping, and labor charges for the repair or return of  
such Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET  
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE  
PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION  
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR  
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,  
INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR  
PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
Warranty Information  
153  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED  
THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,  
SPECIFICATION OR CONTRACT PERTAINING THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO  
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO  
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY  
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY  
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY  
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW  
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY  
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY  
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE  
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF  
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,  
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR  
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM  
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED  
BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR  
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME  
STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL  
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY  
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU  
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO  
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN  
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S  
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL  
OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR  
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE  
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS  
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS  
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE  
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.  
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE  
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY  
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE  
154  
Standard Limited Warranty  
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR  
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR  
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER  
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY  
BE.  
This Limited Warranty allocates risk of Product failure between Purchaser and  
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the  
limitations of liability contained in this Limited Warranty. The agents, employees,  
distributors, and dealers of SAMSUNG are not authorized to make modifications to  
this Limited Warranty, or make additional warranties binding on SAMSUNG.  
Accordingly, additional statements such as dealer advertising or presentation,  
whether oral or written, do not constitute warranties by SAMSUNG and should not be  
relied upon.  
Precautions for Transfer and Disposal  
If data stored on this device is deleted or reformatted using the standard methods,  
the data only appears to be removed on a superficial level, and it may be possible for  
someone to retrieve and reuse the data by means of special software.  
To avoid unintended information leaks and other problems of this sort, it is  
recommended that the device be returned to Samsung’s Customer Care Center for  
an Extended File System (EFS) Clear which will eliminate all user memory and return  
all settings to default settings. Please contact the Samsung Customer Care Center  
for details.  
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center in  
order to provide this service at no charge. If the warranty has expired on the device, charges  
may apply.  
Customer Care Center:  
1000 Klein St.  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
Warranty Information  
155  
Samsung Telecommunications America, LLC  
1301 East Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG (726-7864)  
Important!: If you are using a handset other than a standard numeric keypad, dial the numbers listed  
in brackets.  
Phone: 1-888-987-HELP (4357)  
©2007 Samsung Telecommunications America. All rights reserved.  
No reproduction in whole or in part allowed without prior written approval.  
Specifications and availability subject to change without notice.  
156  
C
Index  
Calendar 100  
Call Alert Type 113  
Call Forwarding  
Always 120  
A
Accessing a Menu Function 38  
Activation of Bluetooth 122  
My Devices 122  
If Busy 120  
If No Reply 120  
If Out of Reach 120  
Call Functions 24  
Adjusting the Call Volume 29  
Answering a Call 25  
Correcting the Number 24  
Making a Call 24  
Recent Calls 26  
Redialing Last Number 25  
Silent Mode 28  
Address Book  
Searching for a Number 31  
Airplane Profile 115  
All Calls  
Alerts On Call 120  
Answering Mode 119  
Call Status Tones 119  
Show My Number 119  
Alphabet mode (ABC and abc) 33  
Answering Mode  
Call Settings  
Any Key 119  
All Calls 119  
Normal 119  
Applications  
Media Player 83  
Auto Reply 113  
Voice Calls 120  
Call Status Tones  
Call Connect Tone 119  
Call End Tone 119  
Minute Minder 119  
Call Time 28  
B
Battery  
Call Waiting 32  
Activate 121  
charging 10  
installing 9  
low indicator 12  
removing 7  
Check Status 121  
Deactivate 121  
Camcorder Options 90  
Camcorder Shortcuts 91  
Effects 90  
Bluetooth  
About 121  
Features 123  
Searching for new devices  
Turning Bluetooth On and Off  
Go to Video 90  
Record Video 90  
Settings 91  
Take Photo 90  
Camera  
Take Pictures 85  
Camera key 17  
Broadcast Messages 81  
157  
 
Camera lens 17  
Camera Options 85  
E
Editing Bookmarks 61  
End key 22  
Ending a Call 25  
Entering Text 33  
Default destination 86  
Effects 86  
Frames 86  
Go to Images 86  
Record Video 86  
Settings 87  
Changing the Text Entry Mode  
Using Alphabet Mode 35  
Using Numbers 37  
Using Symbols 37  
Using T9 Mode 34  
Shooting mode 85  
Timer 86, 90  
Camera Shortcuts  
Shortcut Keys 88  
Charging battery 10  
Clear key 22  
Clearing Memory 130  
Command Keys 21  
Configuring  
F
FDN (Fixed Number) Mode 54  
File Manager 83  
Front Display  
Greeting Message 116  
Front LCD 17  
Your Phone’s Bluetooth Name  
Fun & Apps 83  
Functions and Options 20  
Your Phone’s Bluetooth  
Security 123  
Your Phone’s Bluetooth  
Visibility 123  
G
Games 96  
Getting Started 7  
USIM card information 7  
Voicemail 12  
Connecting to a Bluetooth Device 122  
Connectivity 121  
D
H
Health and Safety Information 132  
Help 22, 124  
Deleting Bookmarks 61  
Dialing a Number  
Address Book 46  
Display  
HiFi Ringers 93  
icons 18  
I
Display Settings 115  
Front Display (LCD) 116  
Light Settings 116  
Main Display 115  
Driving Profile 114  
Icons, description 18  
In Call Options 30  
Inserting  
Memory card 8  
158  
Installing  
Battery 9  
International Call 24  
Memory card slot 17  
Memory Status 131  
Menu Navigation 38  
Menu Outline 39  
Message Alert Repetition 114  
Message Alert Tone 113  
Message Alert Type 113  
Messages 66  
K
Key Tones  
Muting 31  
Keypad Tones 114  
Messaging  
Types of Messages 66  
Missed Call  
L
Language  
Input T9 118  
Call Back 27  
Deleting 28  
Details 26  
Screen Text 118  
Left soft key 21  
Light Settings  
Saving the Number 27  
Send Message 27  
Viewing 26  
Backlight Time 116  
Brightness 116  
Keypad Light 116  
Low battery indicator 12  
Mute 31  
My Album 94  
My Journal 95  
M
Main Display  
N
Background Color 116  
Dialing Display 115  
Font Color 116  
Font Size 116  
Font Type 116  
Greeting Message 115  
Main menu style 115  
Pop Up List Menu 115  
Wallpaper 115  
Normal Profile 113  
Incoming Call 113  
New Messages 113  
Phone Sounds 114  
Number mode 33, 34  
Numeric 34  
O
Options  
Making a Call  
During a Call 29  
Putting a Call on Hold 29  
Organizer 98  
Phonebook 25  
Managing the Phonebook  
Copying an entry to the Phone  
MegaTones 93  
Memory Card  
Calculator 108  
Calendar 100  
Stopwatch 111  
Synchronize 108, 124  
Tasks 102  
Inserting 8  
159  
Timer 111  
Connectivity 121  
Unit Conversion 110  
World time 108  
Outdoor Profile 114  
Display Settings 115  
Memory Settings 130  
Phone Settings 118  
Reset Settings 129  
Security 126  
Software Update 129  
Sound Profiles 112  
Time & Date 117  
P
Phone  
icons 18  
Turning on/off 12  
Phone Settings  
Language 118  
Shooting Video 90  
Shortcuts 39  
Show Number  
Own Number 118  
Power Off Type 114  
Power On Type 114  
Push Message  
creating 71  
Push message  
By Network 119  
Hide 119  
Send 119  
Silent Profile 114  
Soft Keys 21  
Sound Settings 112  
Other Profiles 114  
Speakerphone Key 30  
Speed Dial  
Setting Up Entries 53  
Standard Limited Warranty  
Stopwatch 111  
Storing a Number  
Phonebook 48, 49  
Storing a number  
Phone’s Memory 48  
USIM Card 49  
retrieving from Inbox 77  
R
S
Right soft key 21  
Security 126  
Change PIN Code 128  
Change PIN2 Code 128  
Change the Phone Password  
FDN Mode 128  
Lock Applications 127  
Phone Lock 127  
PIN Lock 127  
Symbols 34  
Security Settings 126  
Send key 22  
Service Dialing Numbers 56  
Settings 112  
T
T9 Mode  
enter a word 34  
T9 mode 33  
Text Input Method  
Changing 33  
Application Settings 126  
Bluetooth 121  
Call Settings 118  
Text Messages 67  
160  
Time & Date  
Date Format 117  
V
Voice Calls  
Home Zone 117  
Set Date 117  
Set Time 117  
Time Format 117  
Time Zone Updating 117  
Auto Redial 121  
Call barring 120  
Call Forwarding 120  
Call Waiting 121  
Voice Mail 13  
Timer 111  
Changing Name and Number  
Travel adapter 10  
Turning on/off  
phone 12  
Voice Note  
creating 72  
U
W
Understanding Your Address book  
Adding a New Contact 48  
Understanding Your Phone 14  
Features of Your Phone 14  
Front View of Your Phone 17,  
Warranty Information 152  
Open View of Your Phone 15  
Understanding Your Phonebook 46  
Using Contacts List 46  
USIM 7  
USIM card  
installing 8  
Using Management  
Checking the Memory Status  
Deleting all of the Phone book  
Entries 55  
Using the Camcorder 90  
161  

Teac DV 28E V User Manual
Sony XE370 User Manual
SimpleTech Zeus Ultra User Manual
Seagate U8TM FAMILY ST313021A User Manual
Seagate SAVVIO ST9300405SS User Manual
Radio Shack 65 717 User Manual
Radio Shack 02A02 User Manual
Philips Coffeemaker HD7810 User Manual
Philips CD 911 User Manual
Onkyo DX 7355 User Manual