251391176_myC-x_couv-en.qxd 18/11/03 17:14 Page 1
*251391176*
SAGEM SA
Mobile Phones Division
Le Ponant de Paris - 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCE
SAGEM SA - Société anonyme à directoire et conseil de surveillance
capital : 33 300 000 € - 562 082 909 RCS PARIS
You have just bought a mobile phone and we
congratulate you on your choice.
Your phone will allow you to use different
international networks (GSM 900 MHz and DCS
1800 MHz) depending on the roaming agreements
between the operators.
We would like to remind you that this phone is
approved to European standards.
To get the most out of using your phone, we
recommend that you read this manual carefully and
keep it handy for future reference if needed.
WARNING
According to the configuration of the networks and
associated subscriptions, certain functions may not
be available (usually indicated by *).
Compatibility of your SIM card
Your phone is compatible with SIM 3V
cards only.
Make sure your SIM card is compatible with your
phone. If an incompatible SIM card is inserted, a
message will be displayed when switching on your
phone. For further information, contact your Operator.
The SAGEM logo and trademark are the property of
SAGEM SA.
AT is a registered trademark of Hayes Microcomputer products
Inc.
Hayes is a registered trademark of Hayes Microcomputer
Products Inc.
T9™ Text Input is a registered trademark of ©Tegic
Communications Inc.
T9 is licensed under one or more of the following U.S.
Patents: 5,818,437, 5,953,541, 5,187,480, 5,945,928,
6,011,554 and additional patents are pending worldwide.
1
myC-1_en_00.pmd
1
22/12/2003, 16:16
Conformance Document
SAGEM SA declare under its sole responsibility that
the product Dual Band GSM/DCS Type myC-1
conforms to the requirements of the following EEC
directives:
EEC Directive 1999/5/CE
Safety
EMC
EN 60950: 2000
EN 301 489-1
EN 301 489-7
Network
3GPP TS 51.010-1 v5.3.0 selected
with GCF-CC v3.11.1 included
Requirements GT01 v 4.7.0
TBR 19 Edition 5
TBR 20 Edition 3
TBR 31 Edition 2
TBR 32 Edition 2
EN 301 511
Health
EN 50360
EN 50361
2
myC-1_en_00.pmd
2
22/12/2003, 16:16
Functions at a glance
Switch on
Press
.
Call
Dial the number then press
.
Answer
Press
.
Hang up
Press
.
Switch off
Press
(long press).
Lock and unlock the keyboard from the standby
screen
Press ∗ then OK.
Redial last number
Press
twice.
Make a call from a number stored in the directory
By name: enter the first letter of the name, press
scroll down the list to find your correspondent, then
,
press
to call.
By location in the directory: enter the location number
then press ∗ to call.
3
myC-1_en_00.pmd
3
22/12/2003, 16:16
Menus at a glance
Enter using
or
Ringing and beeps
Volume and choice of music
Navigate using
and
Confirm using OK
Quit or return to the previous menu using C
Call groups
Personalised ringing tone
Vibrate
According to the configuration of the networks
and associated subscriptions, certain functions
may not be available (indicated by *).
Silent mode
Beeps
Controls
Customization
The phone menus will appear as listed below:
Select language
Automatic response
Network selection
Setting time/date
Display contrast
Converting currencies
Active flip
Services
Directory
Directory menu
Sort by location
Create record
Call groups
Security
Available memory
Personal numbers
Quit
PIN number
Phone code
Confidentiality messages
Text messages
Write new...
Accessories
Call services
Call forwarding
View last numbers
Duration of calls (*)
Display numbers
Double call
Calculator
Alarm
Timer
Game
Automatic redial
Blacklist
Voice mail number
Local information (*)
4
myC-1_en_00.pmd
4
22/12/2003, 16:16
Glossary
Outgoing call
Incoming call
SIM card
A call made from your phone.
A call received by your phone.
The card containing your subscription and access rights to services. The
detachable part is the “micro-SIM”.
PIN
The personal code linked to your SIM card.
Phone code
The phone code is a secret code intended to protect the phone in case of
theft.
IMEI
The identification number of your phone.
SMS or EMS
Short Message Service or Extended Message Service: sending and receipt
of text messages and melodies.
Service provider
or operator
Company which manages the network subscription.
5
myC-1_en_00.pmd
5
22/12/2003, 16:16
Contents
Presentation of the phone ............................ 8
Function keys ................................................ 9
Alphanumeric keyboard ................................ 9
Key 1 ........................................................... 10
Key ∗ ........................................................... 10
Display ........................................................ 10
Messages ...................................................... 24
Receiving a message.................................. 24
Editing a message using Easy
Message T9™ ............................................. 27
Options for messages in the list .................. 30
Calls .............................................................. 31
Forwarding voice calls ................................ 31
Viewing the list of the last numbers used ... 32
Monitoring the duration of calls (*) .............. 32
Display numbers ......................................... 32
Authorising double call ............................... 34
Configuring automatic redial ....................... 34
Blacklist ....................................................... 34
Voice mail number ...................................... 35
Local information distribution ...................... 35
Placing calls on hold ................................... 35
Getting started ............................................. 12
Information on the SIM card ....................... 12
Installing the SIM card ................................ 13
Charging the battery ................................... 14
Switching on/switching off, starting up ........ 15
Setting Time and Date ................................ 15
Searching for a network .............................. 16
Switching off ................................................ 16
Menu access ............................................... 17
Deleting characters ..................................... 17
Initial communication .................................. 18
Making a call ............................................... 18
Receiving a call ........................................... 18
Volume control ............................................ 18
Ending a call ............................................... 18
Ringing tones ............................................... 36
Volume and choice of music ....................... 36
Call groups .................................................. 36
Personalised ringing tone ........................... 36
Setting the vibrator ...................................... 37
Selecting silent mode .................................. 37
Setting the beeps ........................................ 38
Setting the battery beep ............................. 38
Directory ....................................................... 19
Directory display ......................................... 19
Storing a number ........................................ 19
Deleting a number ...................................... 20
Call groups .................................................. 20
Sorting ........................................................ 22
Sending a short message to a stored
number ........................................................ 22
Directory memory space ............................. 23
Displaying personal numbers ..................... 23
Making a call with a stored number ............ 23
Controls ........................................................ 39
Customizing your phone ............................. 39
Selecting the display language ................... 39
Select the type of response ........................ 40
Selecting the network ................................. 40
Setting the time and date ............................ 41
Controlling screen contrast ......................... 41
Converting currencies ................................. 42
Active flip ..................................................... 42
6
myC-1_en_00.pmd
6
22/12/2003, 16:16
Contents
Security ......................................................... 43
Changing the PIN number .......................... 43
Changing the phone code .......................... 43
Accessories .................................................. 45
Calculator .................................................... 45
Setting the alarm ......................................... 45
Setting the timer .......................................... 46
Game ............................................................. 47
Available accessories ................................. 48
Available accessories ................................. 48
Upkeep........................................................ 48
Battery ......................................................... 48
Maintenance menu ..................................... 48
Recommendations ....................................... 49
Technical Characteristics ........................... 53
Troubleshooting ........................................... 55
7
myC-1_en_00.pmd
7
22/12/2003, 16:16
Presentation of the phone
1 - Ear phone/Speaker
2 - High definition graphics screen
3 - Programmable left key
4 - Programmable Central key
5 - Programmable right key
6 - Scrolling arrows
1
7 - Stop - End call - Cancel
8 - Operate/Call - Validate
9 - Battery charging
10 - Microphone
WARNING!
During a call, mind you do not obstruct the
microphone with your hand.
2
11
4
5
8
6
3
OK
C
7
DEF3
ABC
2
1
6
MNO
4GHI
7PQRS
JKL
5
WXYZ9
TUV
8
+
0
10
9
8
myC-1_en_01present.pmd
8
23/12/2003, 12:54
Presentation of the phone
Function keys
Switch off – Reject a call – Hang up
Switch on – Call a number – Receive a call
C
Short press: Return to the previous menu – Delete a
character
Long press: Exit menu mode – Complete deletion of
the entry
OK
—
Confirm
- Programmable keys for direct access to the
functions that you have selected
- Volume control during conversation (left key —:
lower, right key — : louder)
- Contextual action
and
Entry and scrolling through the menus.
Alphanumeric keyboard
Made up of 12 keys: 0 to 9, ∗ and #.
To obtain a letter, press successively on the relevant
key until the desired number or letter appears.
Punctuation marks and special symbols are obtained
by a long press on the # key.
9
myC-1_en_01present.pmd
9
22/12/2003, 16:17
Presentation of the phone
Key 1
A long press on key 1 allows you to access the
voicemail service.
Key ∗
A long press on key ∗ allows you to activate or
deactivate the silent mode.
Display
The high definition graphics screen enables you to
read messages easily. Various icons inform you
about the status of functions.
Battery charge indicator (black if charged, clear if
discharged)
Received signal strength indicator (maximum
strength: 5 bars)
The R letter indicates if the network found does not
correspond to the subscription
If flashes, the phone is searching for a network
Call in progress
Permanent call forwarding
Silent mode
Receipt of messages and presence of messages not
read.
Flashing: voice messages present.
10
myC-1_en_01present.pmd
10
22/12/2003, 16:17
Presentation of the phone
The three keys located under the screen are
allocated to actions described at the bottom of the
screen just above the key, each time it is necessary.
For example:
Confirm Pressing the right key confirms the current
function.
11
myC-1_en_01present.pmd
11
22/12/2003, 16:17
Getting started
Information on the SIM card
SIM card
To use your phone, you have a small card called a
SIM card. In addition to all of the information
necessary for the network, this card contains other
information that you can modify:
This card must be handled and stored
with care in order to avoid excessive
stresses or scratches that would damage
it. If your SIM card is lost, contact your
Operator or Service Provider
• secret codes (PIN - Personal Identification Number)
• directory
immediately.
• mini-messages
Note: Do not leave you SIM card within
the reach of small children.
• functioning of specific services.
Your phone is compatible with the different SIM cards
provided by the Operators.
It is compatible with SIM/WIM cards (cards which
contain in addition the WIM module (Wireless Identity
Module).
12
myC-1_en_02Getting started.pmd
12
22/12/2003, 16:17
Getting started
Installing the SIM card
1
Switch off your phone and disconnect the charger.
The SIM card is inserted beneath the phone’s
battery.
1 Turn the phone over and remove the rear cover by
pushing the lock button and inserting the nail in the
notch.
2
2 Take off the rear cover integrating the battery.
3 Slide the SIM card under the retaining plate, with
the gold-plated contacts facing towards the phone
and the cut-off corner pointed as shown on the
drawing in the phone.
3
4
4 Replace the cover by clicking in first the upper part
then the lower part.
5 Push the lock button to close your phone.
5
13
myC-1_en_02Getting started.pmd
13
22/12/2003, 16:17
Getting started
Charging the battery
Your phone is powered by a rechargeable battery. A
new battery must be charged for at least 4 hours
before it is used for the first time. It will reach its
nominal capacity after several usage cycles.
When your battery has run down, the phone displays
it and cuts out.
To recharge your battery:
Connect the charger to a wall outlet.
Connect the end of the charging cable to the bottom
of your phone.
Warning
The phone will start charging. The battery charging
indicator indicates the charge.
There is a risk of explosion if the
battery is incorrectly replaced or
disposed of in fire.
Charging stops by itself.
Unplug the cable.
Do not short-circuit.
The battery does not contain any
components that can be changed by
you.
It is possible that during charging, the battery may
heat up slightly; this is normal.
Do not attempt to open the battery
case.
Only use the correct chargers and
batteries as shown in the
manufacturer’s catalogue.
Spent batteries must be collected at
the appropriate sites.
You are advised to remove the battery
if you intend to leave your phone
unused for a long period.
14
myC-1_en_02Getting started.pmd
14
22/12/2003, 16:17
Getting started
Switching on/switching off,
starting up
Control of the PIN code
If your phone displays SIM absent,
press
(long press) to switch off your
To switch on your phone:
phone and check that your SIM card is
correctly positioned.
Press
to switch on your phone.
If access to the SIM card is protected by a secret
code, the phone will ask you to enter your PIN code.
Warning
PIN code
If the wrong PIN code is entered three
times in a row, the card will be locked.
To unlock your card:
This is the personal code for your SIM card. You may
be asked to enter this code when the instruction: Pin
number? appears after you switch on your phone.
- enter **05*
- enter the PUK code (Personal
Unlocking Key) provided by your
Network Operator and confirm,
Enter the code of between 4 and 8 digits given to you
by your operator. These digits will not be displayed
on the screen for security reasons.
- enter your PIN code and confirm,
Press # or OK or on right key to confirm.
- enter your PIN code again and
confirm.
Setting Time and Date
The first time the phone is used, the time and date
After 5 or 10 times (depending on SIM
card type), the SIM card will be
permanently locked. Contact your
Operator or your Service Provider to
obtain a new card.
will need to be set.
If the battery has completely run down or been taken
out, you will be asked to confirm the time and date.
Setting the time
Set the time either by typing it in or by using the
scrolling arrows to alter the numbers already
displayed.
15
myC-1_en_02Getting started.pmd
15
22/12/2003, 16:19
Getting started
Setting the date
Set the date either by typing it in numerically or by
using the scrolling arrows to alter the display.
When the time and date are correct, confirm with the
OK key.
Searching for a network
The phone then searches for a network on which it
can communicate:
Network indicator
The indicator of the level of
network signal received enables
you to visualise the quality of
reception. If it shows less than
three bars, look for better
reception to make your call in
good conditions.
If it finds one, the name of the network appears on
the screen.
You are ready to make or receive a call.
If the R letter and a network name are displayed,
calls can be made.
If the R letter is displayed without any network name,
only emergency services will be accessible (police,
ambulance, fire brigade).
If the
flashes, the phone will keep searching. No
network is available.
Switching off
Hold down the
displayed.
key until the end message is
Release the key. The phone switches off.
16
myC-1_en_02Getting started.pmd
16
22/12/2003, 16:17
Getting started
Menu access
The menu functions permit you to verify or modify the
various functions of your phone to adapt it to your
needs.
Direct access to menus
To directly access a menu, press
then enter the number of the selected
menu.
Press the scrolling arrows
menu.
or
to access the
Scroll through the menu using the scrolling arrows
then press OK to access the selected menu.
Each time you want to confirm an action, press OK.
To abandon an action, press C.
To exit the menu mode, press and hold C.
Deleting characters
You can cancel an entry error:
Press quickly on C to delete the last character.
17
myC-1_en_02Getting started.pmd
17
22/12/2003, 16:17
Initial communication
Making a call
The network is displayed.
International call
Dial the number.
Press 0 (long press) to display + then
dial the country code without waiting for
a tone, then the number you require.
Press
.
During the call, flashes on the screen, and tones
may signal the establishment of a connection.
Receiving a call
Emergency services
When you receive a call:
Depending on the operator, you can
contact the emergency services with or
without a SIM card or when the
keyboard is locked. It is sufficient to be
in a zone served by a network.
Press
then speak.
The caller’s number is displayed when it is presented
to the network.
All incoming and outgoing call numbers are
registered in the list of the last calls.
To call the international emergency
service, dial 112 then press
.
Other emergency service numbers may
exist, depending on the country.
Volume control
Increase or decrease the volume during a
conversation by pressing the left or right key.
Ending a call
Press
.
The end of call message appears on the screen.
18
myC-1_en_03comm.pmd
18
22/12/2003, 16:17
Directory
Directory display
You can store the telephone numbers that you call
regularly:
The quantity of phone numbers stored
in the SIM card directory varies
depending on the capacity of the card.
Your Operator or your Service
Provider can provide you with this
information.
- in the SIM card,
- in the phone itself.
Different icons will inform you of the directory location
where the number is stored when you search for it:
SIM card directory
Your phone’s directory
SIM card pre-set directory.
Storing a number
In the Directory menu, select Create record.
Confirm by pressing OK.
Enter the name (the number of accepted characters
depends on the SIM card used). Confirm.
It is advisable to store numbers in
their international format (+, country
code, and number). You can verify the
contents of a record and modify it by
selecting the required name.
Enter the number including the area code, if
necessary (up to 20 characters). Confirm.
You can enter spaces in the number (displayed as
commas “,”) by pressing (long press) on ∗ or #. The
figures entered after a space are processed in a
DTMF sequence (usable after a number).
If necessary, select the call group to which you want
to assign this number.
Depending on the available space, you can select the
storage location of the number entered: SIM card or
phone itself.
When sorting by location, pressing on
the ∗ key launches a search for the
first available location; pressing on #
returns to the start of the list.
19
myC-1_en_04Directory.pmd
19
22/12/2003, 16:17
Directory
Deleting a number
To delete the contents of a directory location, select
the name using the scrolling arrows. Confirm by
pressing OK. Select Delete, then confirm.
Call groups
You are also able to classify contacts recorded in the
directory into Call Groups.
To each of these groups you attribute certain
characteristics (icon, ringing tone, vibrator, etc.).
Creating a group
Groups are defined by default in your phone.
In order to look up their characteristics, display a list
of the groups - Directory/Directory menu/Call
groups menu.
Using the scrolling arrows, choose a group and press
OK. You are then able to look up or alter its
characteristics or to erase the group.
To create a new group:
Go into Directory/Directory menu/Call groups.
Choose Create group.
Enter a name and confirm.
Choose an icon using the scrolling arrows and
confirm.
Choose a ring tone, then choose a vibrator mode,
and confirm.
20
myC-1_en_04Directory.pmd
20
22/12/2003, 16:17
Directory
The selection of a call group is made when entering
a number into the directory, or when modifying a
number you have already saved.
Activate the Call Groups function
If you want the characteristics of the groups to apply
If call groups are not enabled, you
cannot attach correspondents to
groups.
to each call:
Go into Directory/Directory menu/Call groups.
Choose Activate groups.
Tick the box and confirm.
The calls received from contacts who do not belong
to a Call group use the parameters provided in the
Ringing and beeps menu.
Available memory
To ascertain the number of groups which can still be
created:
Go into Directory/Directory menu/Call groups/
Group menu.
Choose Available memory.
The first number shows the number of groups which
can still be created, and the second shows the
maximum number of groups.
Looking up a group
Select the group to be looked up and press OK.
Choose See group. The screen presents the name,
the icon, and the choice of vibrator mode of the
group.
If there are contacts attached to this group, press the
right key to view the list of these ones.
21
myC-1_en_04Directory.pmd
21
22/12/2003, 16:17
Directory
Modifying a group
Select the group to be modified, and press OK.
Choose Modify.
Carry out the wanted modifications.
Confirm by OK.
Deleting a group
Select the group to be deleted, and press OK.
Choose Delete.
Confirm by OK.
Sorting
Directory menu enables you to sort the stored
numbers by name or location; for the latter, the free
locations are indicated in the list.
Sending a short message to a stored
number
Select the recipient scrolling using the scrolling
arrows and confirm using OK. Select Send message
and confirm using OK.
Compose your text message.
Press OK. Select Send and confirm using OK. The
recipient number is displayed.
Send your message using the right key.
22
myC-1_en_04Directory.pmd
22
22/12/2003, 16:17
Directory
Directory memory space
In Directory menu, select Available memory.
Confirm using OK.
The screen will display the amount of available space
on the SIM card and on the phone itself.
Displaying personal numbers
Using Directory menu/Personal numbers menu,
you can create records for your own numbers in
order to be able to consult them.
Making a call with a stored number
Here are all the ways you can call a correspondent,
whose number you have saved in the directory, from
the standby screen:
1) Enter the number under which you have saved
your correspondent’s details, and then press on ∗
(rapid dial).
2) Enter the number under which you have saved
your correspondent’s details, and then press on #.
Your correspondent’s number is displayed, at
which point you can modify or add to the number.
Press on
to make the call.
23
myC-1_en_04Directory.pmd
23
22/12/2003, 16:17
Messages
Receiving a message
Several types of message may be received:
Access to this service depends on the
network. For more information, consult
your Operator or your Service Provider.
• text messages
• melodies.
When you receive a message, the phone beeps (the
beep is selected using the menu Ringing and
beeps/Volume and Choice of music/Messages).
The
icon is displayed on your phone screen.
This icon remains on screen until the messages have
been read. When the icon flashes, the memory is full.
The receipt of melodies can take several minutes.
Messages inform you of the downloading progress.
Ask your operator about downloading
melody messages.
At any time, you can:
• hide that screen by pressing the left key (e.g. to
make a call or access other information on your
phone),
• or cancel the download in progress by pressing the
right key.
Go into the Text messages menu to access the list
of messages received.
Unread messages are in bold.
24
myC-1_en_05messages.pmd
24
22/12/2003, 16:17
Messages
Meaning of the symbols at the top of the
screen
This symbol indicates a text message that has been
written. If this symbol is flashing, it means that the
message has not been sent.
This symbol indicates a message that has been
received. If this symbol is flashing, it means that the
message has not yet been read.
Meaning of the symbols in front of each message
Text messages
Melodies.
Actions possible for a message received
Select a message.
By pressing the left key, you can read a text
message, view it or listen to it.
Press the left key (Options), to view the options
available, which vary according to the type of
message received:
• read it
• delete it
• reply
• forward it to another person
• consult the available memory
• delete all the read messages
• delete all the messages
• choose a sending option
• enter the number of the messaging centre
• save as for personalised ringing melodies.
25
myC-1_en_05messages.pmd
25
22/12/2003, 16:17
Messages
Saving a melody in your phone
A melody is saved in the Ringing and beeps/
Personalised ringing tone menu.
If you have just listened to it, press the right key.
or
Select it in the list and choose the Save option by
pressing the left key (Options).
The space required as well as the space available in
the phone are indicated.
If the maximum number of melodies or the maximum
capacity has been reached, you will be asked if you
wish to delete some melodies or replace an existing
melody with the new one.
This sign placed in front of a melody indicates that it
can be deleted and will free enough memory space
to save the new one.
9
This sign placed in front of a melody indicates that it
can be deleted but will not free enough memory
space to save the new one.
26
myC-1_en_05messages.pmd
26
22/12/2003, 16:17
Messages
Editing a message using Easy
Message T9™
The Easy Message T9™ function helps you to easily
T9™ mode is activated as soon as you
create or modify a message.
enter messages.
Select the Text messages/Write new... menu and
press OK.
Language
Selecting the editing language
By default, the language used is that
which is activated on the phone’s menu
display (or English if a language not
supported by Easy Message T9™ is
selected in the menu).
Select Options by pressing the left key; scroll down
to languages and press OK, then scroll down to the
required Language and press OK.
Using T9 mode
Press the key corresponding to the letter required,
compose the word by continuing to press the keys
corresponding to the different letters, without
worrying about the display, until the whole word is
entered: it will appear in negative, white on black.
If the word proposed corresponds to the one you are
looking for, press 0 to confirm it, create a space and
go on to the next word.
As you go along, depending on the
keys pressed, the software looks in a
dictionary for the corresponding words
that are most frequently used.
It is possible that there are several words in the
dictionary that contain the same sequence of keys
pressed. If the word that appears is not the one you
want, press the central key to scroll through the
words present in the dictionary, corresponding to this
sequence of keys. When you find the word you want,
press 0 to confirm, type a space and go on to the
next word.
27
myC-1_en_05messages.pmd
27
22/12/2003, 16:17
Messages
If the word that you want does not appear in the
dictionary, several additional modes allow you to vary
the nature of the words entered.
Additional entry modes
The right key selects one mode or another.
The 123 mode inserts numbers.
The ABC mode enters words that do not exist in the
dictionary or in another language. To obtain a letter,
press successively on the relevant key until the
desired number or letter appears.
The # key allows you to enter symbols. You will see
a page of symbols (there are several pages available
by scrolling up or down) corresponding to the
numbers 0 to 9. To select one of these, simply press
the corresponding number key, ie, 6 for “{“. After the
symbol has been entered in the text, the phone
reverts to the previous mode.
The scrolling arrows keys allow you to access to
several symbol lists.
Capital letters
You can type capital letters, by pressing the ∗ key
before entering the relevant character. The following
characters will automatically return to lowercase.
Words in capital letters
You can also choose to type a whole word in capital
letters by pressing twice on the ∗ key before entering
the word. It is possible to return to lower case mode
by pressing once on the ∗ key.
28
myC-1_en_05messages.pmd
28
22/12/2003, 16:17
Messages
Punctuation marks
Punctuation marks are obtained by using either the
1 key (except in 123 mode), or using the Insert
symbols mode (quick access using # key).
Accented characters
Accented characters are automatically generated in
the word in Easy Message T9™ mode. In ABC
mode, press successively on the key until the
accented character appears.
Options available when writing a message
Press the left key (Options) to view the various
actions available:
The number of messages stored in the
SIM card changes depending on the
SIM card capacity; contact your
Operator or your Service Provider for
further information.
• Send your message
• Store your message
• Languages: T9 mode can be used in different
languages
- Scroll to the required language and press OK, the
T9 mode will use this selected language.
• De-activate Zoom
• Cancel.
29
myC-1_en_05messages.pmd
29
22/12/2003, 16:17
Messages
Options for messages in the list
When a message has been selected from the list of
messages, pressing the left key (Options) displays
the following actions:
• read it
• send it
• delete it
• zoom/Deactivate zoom
• modify it.
When sending a long message, the
When Write new... has been selected from the list of
messages, press the left key (Options) to:
number next to the icon
indicates
the number of calls required to send
the message.
• find out how much memory is available
• delete the messages that have been read
• delete all the messages
• select a send option (acknowledgement, reply
given, period of validity, message format)
• enter the message centre number.
30
myC-1_en_05messages.pmd
30
22/12/2003, 16:17
Calls
Forwarding voice calls
Depending on your subscription, this service allows
you to transfer incoming calls to another number or a
mailbox.
Look out for incompatibilities; for more
information, consult your Operator or
your Service Provider.
Scroll through the menu to activate the type of
forwarding that you require:
• Forward all voice calls: all incoming calls are
forwarded to a number you define
• Forward all conditional calls
• Forward calls when your line is busy
• Forward calls when there is no answer on your
extension after a period that you can define by
answering the questions on the menu
• Forward calls when your phone is unavailable,
outside of network coverage or switched off.
Enter the number to which you want to forward your
calls. If necessary, include the area code you would
use if you were calling the number from your phone.
The forwarding number to the
messaging centre depends on the
subscription type.
Confirm by pressing the rightand key.
A message on the screen confirms that forwarding
has been activated.
You can also cancel all types of forwarding.
You can view the status of a type of call forwarding in
order to verify whether it is active or not. This
function is also useful for controlling the number to
which your calls are forwarded. The information
supplied is provided by the network.
Warning
Cancellations of forwarding can cause
particular reactions in certain networks.
31
myC-1_en_06Calls.pmd
31
22/12/2003, 16:17
Calls
For services specific to a network,
such as mailboxes, short dialling is
only valid when covered by the
particular network. You may possibly
prefer an international number.
Viewing the list of the last numbers
used
You can consult the list of the last numbers used
(outgoing and incoming if available).
This memory is linked to the phone
and not to the SIM card.
To redial a number:
Select from the list using the scrolling arrows.
Several options are available for this
number: store it in your directory, send
it a short message, delete it. You can
also delete the whole list of numbers.
Make the call by pressing on
.
Shortcut: from the standby screen, press on
.
Monitoring the duration of calls (*)
On the Counters menu you can view the duration of
the last call and all calls made since the last deletion.
This data is purely indicative and does
not represent proof. The metering
criteria for the network can be
appreciably different (indivisible
minutes, etc.).
The Delete durations menu enables you to delete
the duration of the last call and reset to zero the total
calls counter.
The Display of duration menu enables you to select
the duration display during a call.
Display numbers
This menu permits you to see the status of the
display numbers function for:
• your identity (phone number)
• the identity of the person calling you.
32
myC-1_en_06Calls.pmd
32
22/12/2003, 16:17
Calls
Anonymous mode
You can decide whether the person you are calling is
given your phone number or not.
• Preset: the phone network default mode.
• No:
you do not wish to use the anonymous
mode and the person you are calling will
know your number.
• Yes:
you wish to use the anonymous mode and
the person you are calling cannot know
your number.
Your number
• On outgoing calls you can check that your phone
number is displayed on the phone of the person
you are calling (CLIR).
• On incoming calls, you can check that the
telephone number of a phone to which you are
transferring calls will appear on the phone of a
person calling you (COLR).
Caller’s Number
• On outgoing calls, you can see the phone number
to which your call is being transferred (COLP) if the
person you are calling has authorised his or her
identity to be displayed by deactivating the COLR
option.
• On incoming calls, when it is activated, this function
displays on your phone the phone number of the
person calling (CLIP). This function is only possible
if the caller has authorised his identity to be
displayed by deactivating his CLIR option.
33
myC-1_en_06Calls.pmd
33
22/12/2003, 16:17
Calls
Authorising double call
(Service depending on the operator)
Call waiting
During a call, a special tone can inform you that
another caller is trying to reach you. The caller’s
number - and name, if stored - is displayed on the
screen.
You can activate, deactivate and view
the status of the call waiting service in
order to check whether it is active or
not.
During a call, when pressing the central key, the left
key changes function and gives access to different
possibilities of actions with this call.
Configuring automatic redial
You can activate automatic redial either by default or
on demand.
Blacklist
The blacklist is used to limit failures on automatic
calls (calls generated by the automatic redial
function).
When several automatic calls failed with a number
(number busy or unknown), this number is put in the
blacklist and no automatic call will be done with this
number any more until you delete it from the
blacklist.
Note: this function does not apply to the calls
performed manually.
34
myC-1_en_06Calls.pmd
34
22/12/2003, 16:17
Calls
Voice mail number
To program a special permanent call number, type in
this number and confirm.
This number is used when calling the voice mail
centre with the programmable keys.
Local information distribution
This menu allows you to activate and select reception
of information distributed by the network.
Placing calls on hold
(Service depending on the operator)
Warning
During a call, you can put the current call on hold by
pressing OK.
In this case, pressing
ends all calls.
During a call, when pressing the central key, the left
key changes function and enables you to access
different options for the call.
35
myC-1_en_06Calls.pmd
35
22/12/2003, 16:17
Ringing tones
Volume and choice of music
You can set your phone to ring on receiving calls
and/or messages.
There are numerous tunes available
(including a “silent ringing tone”) and
several volume levels including a
crescendo.
You can, during adjustment, listen to the melody
selected or not: activate or deactivate by pressing the
central key; the symbol
appears barred or not.
Select the ringing tone required using the scrolling
arrows.
Press the right key to move on to the next section.
Select the volume required for using the phone with
the scrolling arrows (from 1 to 4 and + for the volume
crescendo) and confirm using OK.
Press the right key to move on to the next section.
Select the volume required for using the hands free
car or pedestrian kit with the scrolling arrows (from 1
to 4 and + for the volume crescendo) and confirm
using OK.
Call groups
See chapter Directory for all the functions about call
groups.
Personalised ringing tone
You have the option of creating a personalised call
tune. A help menu, accessible by pressing the right
key, will guide you.
If you have saved melodies received by message
(see Messages chapter), they will appear in that
menu.
36
myC-1_en_07ringtones.pmd
36
22/12/2003, 16:17
Ringing tones
You can then modify the selected melody (if the
copyright allows it), listen to it or select one of the
following options:
• change its title
• send it by message to another person (if it is not
Copyright protected)
• consult its memory capacity
• consult the available memory
• delete the selected melody
• delete all melodies.
Setting the vibrator
Wherever you require your calls to
arrive discreetly, you can use the
vibrator or select the silent mode.
Using the scrolling keys, select one of the following
options: inactive vibrate, only vibrate, vibrate then
ring.
Confirm by pressing the right key.
Selecting silent mode
If you want the ringing tone of your phone to be
replaced by the vibrator and the beeps to be
suppressed (except for the alarm tone), tick the box
and confirm by pressing OK.
Silent mode is automatically
deactivated when the hands free car
kit is connected as well as when the
phone is switched on/off.
You can also activate/deactivate the silent mode by
holding down the ∗ key.
This mode is indicated by the symbol on the
screen.
37
myC-1_en_07ringtones.pmd
37
22/12/2003, 16:17
Ringing tones
Setting the beeps
Different controls are available:
You can select the tones produced by
your keypad: Beep, DTMF (musical
keys) or non active tones (in this last
case, when you press your keyboard,
it does not make a noise).
Setting the keypad tones
Select the tone required using the scrolling arrows
and confirm (press the right key).
Setting the network tone
If you want your phone to give a warning beep when
it locates a network on which it can communicate:
Tick the box and confirm by pressing OK.
Setting the battery beep
If you want your phone to give a warning beep when
battery is low capacity:
Tick the box and confirm by pressing OK.
38
myC-1_en_07ringtones.pmd
38
22/12/2003, 16:17
Controls
Customizing your phone
Installing the energy saving mode
In order not to use the phone’s screen light and
thereby increase its operating time:
In the Customization/Energy saving menu, check
No light and press OK to confirm.
Configuring the idle mode
In the Customization/Screen Saver menu, use the
The frequency of display of the screen
saver has a direct impact on the
phone's operating capacity. For optimal
operating capacity, set the maximum
interval.
scrolling arrows to select the screen saver.
Personalising the welcome screen (greeting
message)
You can personalise the welcome screen of your
phone by typing a text. Confirm by pressing OK.
Programmable keys
You can give a function of each of the three
programmable keys.
Selecting the display language
You can select the language in which you wish your
phone display to operate:
Select Automatic
The display language will be that of your SIM card (if
available).
Otherwise select the language of your choice using
the scrolling arrows and confirm by pressing OK.
39
myC-1_en_08settings.pmd
39
22/12/2003, 16:17
Controls
Select the type of response
You can reply to a phone call:
- either automatically, if you have ticked the
Automatic ans. box and confirmed by pressing OK
- or by pressing any numeric key if you have ticked
the Any key and confirmed by pressing OK.
Selecting the network
Network
Every SIM subscription card can store an ordered list
of preferred networks.
When your home network is not
accessible (abroad, for example), your
phone automatically searches for
another available and authorised
network in the order of preference
indicated by the list on the SIM card.
If the list has not been programmed, or if none of the
networks on the list are available or authorised, the
phone searches for an authorised network providing
the highest level of signal.
If none of the available network is authorised, you
can use your phone to make emergency calls only
until a network connection can be re-established.
If no network is available, your phone continues to
search for one.
In all cases, the phone searches for its home network
first.
Available networks
This menu enables you to start a search for all
available networks at the present location and to
display them.
You can choose a manual selection for
a network search.
Use the scrolling arrows to scroll the available
networks and confirm the one wanted (press the right
key).
40
myC-1_en_08settings.pmd
40
22/12/2003, 16:17
Controls
Preferred networks
To program a list of preferred networks into your
SIM card:
Use the scrolling arrows to select from the list.
Confirm.
If the network is not on the list, select the country
code then the network code (ask the organisation
from which you obtained the SIM card).
Setting the time and date
Setting time/date/Control menu
Set the hours and minutes by pressing on the
corresponding numbers or by scrolling through the
values using the
or
arrows.
Press the right key to go to the next setting.
Set the day, month and year.
Press OK to confirm.
Setting time/date/Display menu
Use the scrolling arrows to select the type of clock to
be displayed on the screen or to display no clock.
Press OK to confirm.
Controlling screen contrast
Control screen contrast using the scrolling arrows,
and confirm by pressing OK.
41
myC-1_en_08settings.pmd
41
22/12/2003, 16:17
Controls
Converting currencies
This menu enables you to convert one currency into
another. Using the scrolling arrows, you can select:
Rapid exchange
If you tick the Rapid exchange box, the converter
will operate on the standby screen, enter the digits
required and use the scrolling arrows to perform a
conversion.
Exchange rate
Enter the conversion rate corresponding to the two
selected currencies.
Currencies
Enter the symbols of the two currencies to convert. A
long press on C returns to the beginning of the line to
enter them (if the symbols are already entered).
Active flip
By default, calls are answered by opening the flip
and you will just need to close it to hang up. That
facility can be deactivated.
This menu allows you to modify these settings:
- on opening: this menu enables you to activate or
not the option of taking the call by opening the flip.
- on closing: this menu enables you to activate or not
the option of hanging up by closing the flip.
42
myC-1_en_08settings.pmd
42
22/12/2003, 16:17
Security
Changing the PIN number
Warning
You can change your PIN number:
If the wrong PIN code is entered three
times in a row, the card will be locked.
To unlock your card, call the
To the question: Old pin number ?, enter your old
PIN code and confirm (press the right key).
To the question: New pin number ?, enter your new
PIN code (a number between 4 and 8 digits) and
confirm by pressing OK.
organisation which issued your card
for guidance in unlocking it.
If your SIM card is permanently
locked, contact your Operator or your
Service Provider to obtain a new card.
To the question: Verify pin numb. ?, enter your new
PIN code a second time to verify and confirm by
pressing OK.
Checking the PIN number
You can activate your PIN number so that it is
requested and checked every time the phone is
switched on, so that if the phone is lost or stolen,
your SIM card cannot be used:
To the question: Pin number ?: enter your PIN
number and confirm (press the right key).
Tick the box Pin num. control and confirm by
pressing OK.
Changing the phone code
The Phone code menu enables you to activate the
phone code so that it is requested and checked each
time the phone is switched on, in the case of a
different SIM card being used.
The phone code is a secret code,
intended to protect the phone in the
event of theft. It is linked automatically
to the SIM card present on activation.
If the incorrect code is entered, the time interval
between each attempt increases, making use
impossible.
43
myC-1_en_09security.pmd
43
22/12/2003, 16:17
Security
To change the phone code, you must first check that
it is active (Control phone code menu).
To activate:
To the question: Phone code?, enter 0000 and
confirm (press the right key).
Tick the Phone control box and confirm by
pressing OK.
To deactivate:
To the question: Phone code?, enter your code
(possibly changed) and confirm (press the right key).
Do not tick the Phone control box and confirm by
pressing OK: it will reset the code to 0000.
Once the phone code is activated, you can modify it:
To the question: Old phone code?, enter your old
phone code and confirm (press the right key).
To the question: New phone code? enter your new
phone code (a number of between 4 and 8 digits)
and confirm by pressing OK.
To the question: Verif. phone code? enter your new
phone code a second time to verify it and confirm by
pressing OK.Confidentiality messages
The function Confidentiality messages allows you
to delete automatically the numbers recorded in the
Call Services menu and the text messages that are
in the phone's memory when a new SIM card is
inserted. This function is activated/deactivated in the
menu Confidentiality messages.
44
myC-1_en_09security.pmd
44
22/12/2003, 16:17
Accessories
Calculator
You can operate the calculator using the following
keys:
right key
Add
central key
Subtract
Multiply
Divide
∗
#
OK
C
Equals
Delete
Long press on:
Decimal point
∗ or # or @ or right key
right key
Monetary operations if there is no calculation in
progress
(See chapter Controls)
Monetary conversion
From the standby screen, you can convert a currency
into another according to the settings chosen
(calculator right key) or menu (Controls/Currency
converter).
Setting the alarm
To use your phone as an alarm clock:
The alarm function is represented on
the screen by the symbol
.
Using the numbers or the scrolling arrows, set the
alarm time.
Permanent flashing of this symbol
indicates that an alarm time has been
programmed but the date and time
clock has not been initialised.
Press the right key to go to the next item.
Set the minutes.
Tick the box and confirm by pressing OK.
45
myC-1_en_10accessories.pmd
45
22/12/2003, 16:17
Accessories
The ringer is stopped by pressing any key; the alarm
remains programmed.
The alarm function remains active when the phone is
switched off. It is not affected by silent mode.
Setting the timer
The same procedure is applied as for the alarm
function, but in this case you start a time clock
running against a defined value. The phone must
remain switched on.
46
myC-1_en_10accessories.pmd
46
22/12/2003, 16:17
Game
One game is available. The presentation menu
guides you on how best to use it.
47
myC-1_en_11games.pmd
47
22/12/2003, 16:17
Available accessories
Available accessories
Different accessories are available on your phone:
• Additional batteries
• Additional chargers.
Warning
Do not connect/disconnect the special
socket on your phone during a call.
Upkeep
Clean your phone using a soft slightly damp non
fluffy cloth.
Battery
After a long period of non use (several months),
when the charger is being connected, the unit might
not switch on.
Warning
Certain chemical products can damage
plastic. Do not use aerosols, certain
special cleaning products, corrosive
products, solvents, alcohol and
detergents.
In this case:
Disconnect the charger, wait a few seconds, and plug
it in again.
It may be necessary to repeat this several times.
Maintenance menu
This menu contains information that you could be
asked for to perform specific operations. If they are
required, you will be shown how to find information
you need.
48
myC-1_en_12acess-upkeep.pmd
48
22/12/2003, 16:17
Recommendations
Recommendations
The use of your phone is controlled by safety
regulations intended to protect both the user and his/
her environment.
CE marking on the unit conforms to
directives 1999/5/EC, 89/336/CEE and
73/23/CEE.
Electrical safety
Only use the appropriate chargers contained in the
manufacturer’s catalogue. Using another charger
could be dangerous and will invalidate the
manufacturer’s warranty.
The main plug socket must be easily accessible. The
main voltage should correspond to that given on the
manufacturer’s plate on the charger.
Airplane safety
In an airplane, your phone must be switched off to
ensure that it does not interfere with the planes
systems.
Its use is illegal and you could be prosecuted or
banned from using cellular networks in the future if
you do not abide by these regulations.
Areas containing combustibles
It is advisable to switch your phone off in the vicinity
of gas stations.
Regulations limit the use of radio equipment in
chemical factories, gas depots and any area where
there are mines. You are advised to abide by these
rules.
49
myC-1_en_13recommendations.pmd
49
22/12/2003, 16:17
Recommendations
Road safety
Except in an emergency, never use your phone when
driving. Always keep your eyes on the road when you
are driving.
To make a call, pull to the side of the road, then
make your call. Abide by the current laws.
Warning
Ensure that no part of your body is
permanently close to the aerial unless
there is a metal screen (e.g.: a vehicle
roof, …).
The phone must be shielded sufficiently from
electronic equipment in the vehicle. It gives off micro-
waves, which may affect the operation of such
equipment.
Installation of your phone in a vehicle must only be
performed by qualified personnel.
Non ionising radiation
To obtain maximum satisfaction from your phone, use
it in a vertical position. Your personal safety can only
be improved by doing so.
Electronic medical equipment
Your phone emits radio waves that could possible
interfere with electronic medical equipment, for
example an auditory prosthesis, heart pacemakers…
Your doctor or the manufacturer of the medical item
will be able to advise you on whether your phone
could cause such interference.
In hospitals, the phone must be switched off.
50
myC-1_en_13recommendations.pmd
50
22/12/2003, 16:17
Recommendations
General precautions
Do not attempt to open your phone and repair it
yourself. The manufacturer cannot be held
responsible for any damage/accident that may result
from this.
Any work carried out by non-authorised personnel
will invalidate your warranty.
Do not use your phone in damp areas (bathroom,
swimming pool…). Protect it from liquids and other
moisture.
Do not expose your phone to extreme temperatures
from - 10°C to + 55°C.
Do not leave your phone within the reach of small
children (certain removable parts may be accidentally
ingested).
Use your phone with original accessories, or your
warranty will be rendered invalid.
The physicochemical processes created by chargers
impose temperature limits when charging the battery.
Your phone automatically protects the batteries in
extreme temperatures.
Removing the battery may mean that the time is lost.
You are strongly advised not to connect your phone
to the charger if it doesn’t contain a battery.
To avoid the risk of demagnetisation, do not let
electronic devices close to your phone for a long
time.
51
myC-1_en_13recommendations.pmd
51
22/12/2003, 16:17
Recommendations
SAGEM SA cannot be hold responsible for the
contents of messages, programs and downloadable
object and for the direct or indirect damage which
may be cause to the user of the phone or the phone
itself.
Note on downloading facilities
Your mobile may allow you to download ringtones. You must
check that these objects are free of copyright. SAGEM is not
responsible for the content of downloaded objects.
Some of these objects may contain data which may cause
malfunction or loss of data within your mobile phone (ie, a
virus).
For this reason, SAGEM declines all responsibility for (1) the
reception of data that has been downloaded or loss of said
data, (2) the consequences on the operation of the mobile
phone and (3) damage resulting from the reception of said
downloaded data or loss of said data. Moreover, SAGEM
draws attention to the fact that problems caused by the
reception of downloaded data that does not comply with
SAGEM’s specifications are not covered by the guarantee.
Consequently, the cost of diagnosing and repairing mobile
phones affected by said downloaded data will be charged to
customers.
The software program developed by SAGEM remains the
exclusive property of SAGEM SA. It is therefore highly
prohibited to modify, translate, de-compile or disassemble this
software program or any part thereof.
52
myC-1_en_13recommendations.pmd
52
22/12/2003, 16:17
Technical Characteristics
Weight: 78 g
Size: 86 x 44 x 20 mm
Original battery: Lithium Ion 550 mAh or 680 mAh
(depending on model)
Battery life calls/standby: up to 4 h/280 h
The technical characteristics of the product are subject to
change without notice.
This mobile phone complies with European requirements
regarding exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the limits for
exposure to radio frequency (RF) energy recommended
by the Council of the European Union and ICNIRP. These
limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population.
The guidelines were developed by independent scientific
organisations through periodic and thorough evaluation of
scientific studies. The limits include a substantial safety
margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones employs a unit
of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit recommended by the Council of
the European Union and the ICNIRP is 2.0 W/kg*.
*
The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over 10 g of tissue.
The limit incorporates a substantial margin of safety to
give additional protection for the public and to account
for any variations in measurements. SAR values may
vary in different regions on the world, depending on
national reporting requirements and the network band.
53
myC-1_en_14charactech.pmd
53
22/12/2003, 16:17
Technical Characteristics
Tests for SAR have been conducted using standard
operating positions with the phone transmitting at its
highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to
reach the network. In general, the closer you are to a
base station antenna, the lower the output.
Before a phone model is available for sale to the public,
compliance with the European R&TTE directive must be
shown. This directive includes as one essential
requirement the protection of the health and the safety for
the user and any other person.
This highest SAR value for this model phone when tested
for compliance against the standard was: 1.12 W/kg.
While there may be differences between the SAR levels
of various phones and and at various positions, they all
meet the EU requirements for RF exposure.
Advice for limiting exposure to radiofrequency (RF) fields:
For individuals concerned about limiting their exposure to
RF fields, the World Health Organization (WHO) provides
the following advice:
Precautionary measures: Individuals: Present scientific
information does not indicate the need for any special
precautions for the use of mobile phones. If individuals
are concerned, they might choose to limit their own or
their children’s’ RF exposure by limiting the length of calls,
or using «hands-free» devices to keep mobile phones
away from the head and body. Further information on this
subject can be obtained from the WHO home page http://
54
myC-1_en_14charactech.pmd
54
22/12/2003, 16:17
Troubleshooting
Problem - Situation
The phone does not turn on
Actions
Remove the battery and then replace it.
or
Connect the phone to the charger (check that this is
plugged in) for approximately 5 minutes.
No network recognised
Remove the SIM card. Check that there is no dust or
grit in the SIM slot. Replace the SIM card being sure
to push it right up to the stop point.
Calls to a messaging service or voice
server do not get through
Check in the Ringing and beeps/Tones menu that the
box is ticked.
Unable to turn the phone on
Charge the phone for 15 minutes before turning it on.
Check the battery charging indicator:
cycling: charging normally
not cycling: disconnect the charger, re-connect and
then check the battery charging indicator: if it is still
not cycling, disconnect the charger and re-connect
several times.
If the battery is still not charging, contact the after
sales service.
When the battery charging indicator is continuously
on, the battery is fully charged.
Error message:
BATTERY STATUS NOT KNOWN
The battery pack is not recognised by the phone.
Check that the battery pack is correctly fitted in the
phone.
Error message: LOW BATTERY
This message is displayed when the battery charge is
too low. The phone turns off automatically. Charge
the phone.
55
myC-1_en_15dépannage.pmd
55
22/12/2003, 16:17
Troubleshooting
Problem - Situation
Error message: SIM NOT PRESENT
Actions
Check that the SIM card has been inserted correctly.
Examine the SIM card. If it is damaged, contact your
mobile phone operator sales point. If the message is
still displayed, contact the after sales service.
Error message: INCORRECT PIN
Error message: SIM BLOCKED
The PIN has been incorrectly entered. If the PIN is
entered incorrectly three times, the SIM card is
blocked.
The PIN has been incorrectly entered three times.
Use your Personal Unblocking Key (PUK) to unblock
the SIM card.
Enter:
**05*PUK*PIN*PIN#
PUK: your PUK code supplied by your mobile phone
operator.
PIN: your PIN code.
After 10 (or 5 depending on the type of SIM card)
unsuccessful attempts, the SIM card is blocked
permanently. You must then contact your mobile
phone operator to get a new card.
Error message: SIM LOCKED
The mobile phone operator may require certain types
of SIM card to be used. This message indicates that
the SIM card is not accepted.
Remove the SIM card and turn the phone on again. If
you get the SIM not present error message, check
with your phone dealer whether your SIM card is
compatible. Otherwise, contact the after sales
service.
56
myC-1_en_15dépannage.pmd
56
22/12/2003, 16:17
Troubleshooting
Problem - Situation
The phone display does not change
Actions
Press a key. If nothing is displayed, check the
position of the SIM card. If the problem continues,
contact the after sales service.
No connection made
Check the form of the number called.
Check that there is at least one field strength dot
showing. If R is displayed but there is no mobile
phone operator name, only emergency calls are
allowed.
Check that you have not used all your credit with the
mobile phone operator.
Check that the SIM card provides the service you
required and that it has not expired.
Check and, if necessary, disable the outgoing call
lock.
The network is saturated. Please try later.
If you still have problems getting a connection,
contact the Hotline.
Unable to receive calls
Try to make a call to check that the phone and the
network are operational.
Check and, if necessary, disable the permanent call
redirection (permanent call redirection icon
displayed).
Check and, if necessary, disable the incoming call
lock.
If you still have problems receiving calls, contact the
Hotline.
57
myC-1_en_15dépannage.pmd
57
22/12/2003, 16:17
Troubleshooting
Problem - Situation
Cannot send messages
Actions
Check that the SIM card provides this service.
Check that the message server is correctly set up.
Try to make a call to check that the phone and the
network are operational.
Try sending the message later.
No voice box
Check that the SIM card provides this service.
Set up the redirection to the voice box using the
information provided by the mobile phone operator.
58
myC-1_en_15dépannage.pmd
58
22/12/2003, 16:17
ꢀ
myC-1_Notes.pmd
59
22/12/2003, 16:17
ꢀ
myC-1_Notes.pmd
60
22/12/2003, 16:17
|