Roberts Radio CRD 37 User Manual

CRD-37

DAB / FM RDS / CD Clock radio with MP3 / WMA playback facility

Please read this manual before use

CRD-37 Clock radio features

The Roberts CRD-37 Clock radio provides the following features in an

attractive compact unit.

Radio

The CRD-37 can receive DAB and FM (with RDS) wavebands.

The CRD-37 plays audio CDs (can also play CDR, CD-RW discs).

CD-MP3/WMA

The CRD-37 plays MP3 and WMA ﬁles which have been recorded to

CDR or CD-RW discs.

CD Bookmark

The CRD-37 has a CD Bookmark feature which allows CD playback

to resume from the track and time position reached when the unit was

previously put into standby mode.

Clock

Automatic clock setting from DAB or FM RDS broadcasts.

Headphone output

A standard 3.5mm headphone socket is provided for private listening.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Controls

(Front)

1. On/Off button

6. Display button

16. Snooze button

11. Volume control

2. Dimmer button

7. Intro / Repeat button

8. Function button

9. Menu button

17. Tuning / Skip Up button

18. Tuning / Skip Down button

12. Memory / Album Up button

13. LCD display

3. Alarm / Autoscan button

4. Sleep button

14. Stop button

15. Play / Pause / Select button

5. Prog / Random button

10. Memory / Album Down button

Controls

(Rear view)

19. Wire DAB/FM aerial

20. DC in socket

21. Headphone socket

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Using the clock radio for the ﬁrst time

1. Place your clock radio on a ﬂat surface.

2. Fully extend the wire aerial located on the rear of your clock radio. The

wire should be fully extended and positioned for optimum reception.

3. Insert the adaptor plug into the DC socket located on the rear of your

clock radio.

4. Plug the adaptor into a standard 13amp mains socket outlet.

IMPORTANT: The mains adaptor is used as the means of connecting

theclockradiotothemainssupply.Themainssocketusedfortheclock

radiomustremainaccessibleduringnormaluse.Inordertodisconnect

the clock radio from the mains completely, the mains adaptor should

be removed from the mains socket outlet completely.

5. Whenyourclockradioisﬁrstswitchedonthedisplaywillshow"Setting

Clock" and a station search will be performed automatically.

6. When stations have been found, the clock information will appear on

the display. Press the Display button to toggle between showing the

time only or showing both the date and time.

7. If no stations have been found "Clock not set" will be displayed. It may

thenbenecessarytorelocateyourclockradiotoapositiongivingbetter

reception. You should then carry out an autoscan to ﬁnd stations as

described on page 9.

Operating your clock radio - DAB

1. Fully extend the wire aerial.

2. If your clock radio is in standby mode, press the On/Off button to

switch on your clock radio.

3. Press and release the Function button to select DAB. The display

will show "DAB" and then " Now tuning" for a few seconds.

4. If this is the ﬁrst time the clock radio is used a quick scan of UK Band

III DAB channels may be carried out (the scan is normally performed

automatically when the clock is ﬁrst set - page 5). If the clock radio has

been used before, the last used station will be selected. If new radio

stations are found, they will be added to the stored list of stations.

5. When ﬁrst switched on, the ﬁrst station in the list of stations found will

be played. The display will show the station name in the ﬁrst line of

the display and other information in the second line.

6. If the station list is still empty after the scan operation your clock radio

will display "Station not available".

7. If no signals are found it may be necessary to relocate your clock radio

to a position giving better reception, and then repeat the scan using

the AutoScan facility (page 9).

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Selecting a station - DAB

1. The top line of the display shows the name of the station currently

selected.

2. Press the Tuning Up or Down buttons to scroll through the list of

available stations on the lower line of the display. Stop pressing the

Tuning buttons when you ﬁnd the station that you wish to hear.

3. Press and release the Select button to select the station. The display

may show "Now tuning" while your clock radio ﬁnds the new station.

4. Adjust the Volume to the required settings.

Note: If after selecting a station the display continues to show "Station

not available" it may be necessary to relocate your clock radio to a

position giving better reception.

Secondary services - DAB

1. Certainradiostationshaveoneormoresecondaryservicesassociated

with them. If a station has a secondary service associated with it the

display will show ">>" next to the station name on the station list. The

secondary service will then appear immediately after the primary

service as you press the Tuning Up button.

2. Press and release the Select button to select the station.

Display modes - DAB

Your radio has seven display modes:-

1. Press the Display button to cycle through the various modes.

a. Scrolling text

Displays scrolling text messages such

as artist/track name, phone in number,

etc.

b. Programme type

Displays the programme type information

for the station currently being received.

e.g. Pop, Classic, News, etc.

c. Multiplex Name

d. Time and date

Displays the name of the DAB multiplex

to which the current station belongs.

Displays the current time and date.

e. Channel & frequency Displays channel number and frequency

for the currently tuned DAB multiplex.

f. Bit rate/audio type

g. Signal error

Displays the digital bit rate and audio

type.

Displays signal error level for the station

currently being received.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Finding new stations - DAB

As time passes new stations may become available. To ﬁnd new stations

proceed as follows:-

1. Press and release the Alarm/Auto Scan button. The display will

show "Scanning". Your clock radio will perform a scan of the UK DAB

frequencies. As new stations are found the station counter on the

right-hand side of the display will increase and stations will be added

to the list.

2. To carry out a full scan of the entire DAB Band III frequencies press

and hold down the Alarm/Auto Scan button for more than 2 seconds

and then release. The display will show "Scanning". As new stations

are found the station counter on the right-hand side of the display will

increase and stations will be added to the list.

Manual Tuning - DAB

Manual tuning allows you to tune directly to the various DAB Band III

channels. UK DAB stations are located in the range 11B to 12D.

1. Press and release the Menu button until the display shows "Station

order".

2. Press the Tuning Up or Down buttons until "Manual tune" appears

on the display. Press and release the Select button.

2,3

3. Press the Tuning Up or Down buttons to select the required DAB

channel.

2,3

4. Press and release the Select button. The clear unﬁlled rectangle

in the indicator graph shows the minimum signal strength needed

for good DAB reception. The bars will go up and down showing the

changing signal strength as you adjust the wire aerial or your clock

radio's position.

2,4,5

5. Press and release the Select button to return to normal tuning

mode.

Signal strength display - DAB

1. Press and release the Select button. The lower line of the display

shows signal strength. Position your clock radio and angle the wire

aerial for best reception using the signal strength display as a guide.

The strongest signal is indicated with the largest number of black

rectangles on the signal strength display.

1,2

2. Theclearunﬁlledrectangleindicatesminimumsignallevelrequiredfor

satisfactory reception. Press and release the Select button to return

to the previous display mode.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Dynamic Range Control (DRC) settings - DAB only

Dynamic Range Control (also known as DRC) can make quieter sounds

easiertohearwhenyourradioisusedinanoisyenvironment.Thisfunction

is only available for the DAB waveband.

1. Press the On/Off button to switch on your clock radio.

2. Press and release the Menu button until "Station order" appears on

the display.

3. Press and release the Tuning Up or Down buttons until the display

shows "DRC value".

4. Press and release the Select button to enter adjustment mode. The

top line of the display will show the currently applied DRC setting.

5. Press and release the Tuning Up or Down buttons to select the

3,5

required DRC setting (default is 0) .

DRC 0 DRC is switched off, Broadcast DRC will be ignored.

DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.

DRC 1 DRC is set as sent by broadcaster.

3,5

6. PressandreleasetheSelectbuttontoconﬁrmthesetting.Thedisplay

4,6

will return to radio mode.

Note: Not all DAB broadcasts are able to use the DRC function. If the

broadcast does not support DRC, then the DRC setting in the clock radio

will have no effect.

Operating your radio - Search tuning FM

1. Fully extend the wire aerial and press the On/Off button to switch on

your clock radio.

2. Press and release the Function button until the FM band is

selected.

3. Press the Tuning Up button and then press the Alarm/Auto scan

button.Yourclockradiowillscanfromthecurrentlydisplayedfrequency

direction upwards and will stop scanning when it ﬁnds a station of

sufﬁcient strength.

4. The display will show the frequency of the signal which has been

found. If RDS information is available, after a few seconds the display

will show the radio station name. The display will also show "St" and

"RDS" on the upper line if the station is received with stereo and RDS

information.

3,6

5. To ﬁnd other stations press and hold the Alarm/Autoscan button as

above.

6. To scan the FM band in a downwards direction (high frequency to low

frequency) press the Tuning Down button and then press Alarm/Auto

scan button.

7. When the end of the waveband is reached your radio will recommence

tuning from the opposite end of the waveband.

8. Adjust the Volume to the required settings.

9. To switch off your clock radio press the On/Off button.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Manual tuning - FM

1. Press the On/Off button to switch on your clock radio.

2. Press and release the Function button as needed to select the FM

waveband.

3. Fully extend the wire aerial for FM reception.

4. Repeatedly press the Tuning Up and Down buttons to tune to a

station. The frequency will change in steps of 50kHz. Pressing and

holdingoneofthebuttonswilladvancethefrequencyselectionseveral

times each second.

5. When the end of the waveband is reached the radio will recommence

tuning from the opposite end of the waveband.

6. Set the Volume to the desired settings.

7. To switch off your clock radio press the On/Off button.

Display modes - FM

On FM the bottom line of the display can be set to any of the following

modes:-

1. Press the Display button to cycle through the various modes.

a. Scrolling text

Displays scrolling text messages such

as artist/track name, phone in number

etc.

b. Programme Type

Displays programme type for the station

currently being listened to

e.g. Pop, Classic, News, etc.

c. Time and date

d. Frequency

Displays the current time and date.

Displays the frequency of the station

being listened to.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Presetting stations

There are 20 memory presets available. There are 10 on each of the DAB

and FM wavebands.

1. Press the On/Off button to switch on your clock radio.

2. Tune to the required station as previously described.

3. Press the Prog/Random button, the display will show "Preset" with

"01" ﬂashing.

4. Use the Memory Up or Down buttons to select the desired preset

number under which you wish to store the station.

5. Press the Prog/Random button again. The display will show, for

example, "Preset 1 saving" and then "Preset 1 saved". The station

will be stored under the chosen preset. Repeat this procedure for the

other presets as needed.

6. Stations stored in preset memories may be overwritten by following

the above procedure.

Recalling a preset station

1. Press the On/Off button to switch on your clock radio.

2. Select the required waveband by pressing the Function button.

3. Press the Memory Up or Down buttons to select the desired preset

number.

4. Your clock radio will tune to the station stored in preset memory.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Compact discs

Use only Digital Audio CDs which have the

symbol.

Never write on a CD or attach any sticker to the CD. Always hold the CD

at the edge and store it in its box after use with the label facing up.

To remove dust and dirt, breathe on the CD and wipe it with a soft, lint free

cloth in a straight line from the centre towards the edge.

Cleaning agents may damage the CD.

Do not expose the CD to rain, moisture, sand or to excessive heat. (e.g

from heating equipment or in motor cars parked in the sun).

CD-R/CD-RW discs

Your CRD-37 can playback CDDA format audio CD-R/CD-RW discs that

have been ﬁnalised* upon completion of recording.

Your CRD-37 may fail to playback some CD-R/CD-RW discs due to poor

recording and wide variation in quality of the CD-R/CD-RW disc.

*Finalising enables a CD-R/CD-RW disc to playback on audio players

such as your CRD-37.

WARNING

CLASS 1 LASER PRODUCT means that the laser's construction makes

it inherently safe so that the legally prescribed maximum permissible

radiation values can never be exceeded.

Caution: Using any equipment or devices other than those described and

speciﬁed in these operating instructions, or tampering with the unit in any

way, can result in dangerous exposure to radiation.

MP3 / WMA CD Mode

The CRD-37 is able to play CD-R and CD-RW discs containing MP3 or

WMA ﬁles.

InMP3/WMAmodetheterms"album"and"ﬁle"areveryimportant."Album"

corresponds to a folder on a PC, "File " to an audio track in MP3 or WMA

format. The clock radio reads MP3 or WMA ﬁles with a maximum of 255

ﬁles per folder.An MP3 or WMACD may not contain more than 512 ﬁles or

albums in total. MP3 or WMA ﬁles must be created with an audio sample

rate of 44.1kHz (this is normal for ﬁles created from CD audio content).

Both MP3 and WMA ﬁles may be recorded on to the same media.

When burning CD-R and CD-RWs with audio ﬁles, various problems may

arise which could lead to interference in playback. This can be caused

by faulty software or hardware settings in your PC or by the CD being

used. Should such problems arise, contact the customer services of your

CD burner or software manufacturer or look for relevant information, for

exampleontheinternet.WhenyouaremakingaudioCDs,observealllegal

guidelines and ensure that the copyright of third parties is not infringed.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Inserting a CD

1. To open the CD compartment, lift up the CD door.

2. Put the CD on the spindle until it clicks into place and then gently close

the CD compartment by pushing the cd door back into position.

Playing a CD

1. Press the On/Off button to switch on your clock radio.

2. Press the Function button to choose CD as the input source.

The CD player will scan the contents of the CD and "READING" will

appear on the display.

Audio CD: the total number of tracks and total playing time will then

be displayed.

MP3 / WMA CD: The total number of ﬁles and folders then be

displayed.

3. Press the Play/Pause/Select button to start playback. The display

will show the ﬁrst track number and the play symbol . The radio will

also show:

Audio CD: The current track number and elapsed playing time.

MP3/WMACD:Thecurrentﬁlenumberfor3seconds,beforechanging

to show the ﬁle name, ID3 tag and the elapsed playing time.

4. Adjust the Volume to the required settings.

5. To pause playback press the Play/Pause/Select button. The pause

symbol will show on the display.

Audio CD: The current track number and the elapsed playing time will

be shown on the display.

5,6

MP3 / WMACD:The ﬁle name with ID3 tag scrolls, the elapsed playing

time will be shown on the display.

6. To continue playback press the Play/Pause/Select button again.

7. To stop playback, press the Stop button once.

CD Bookmark

TheCDBookmarkfeatureallowsyoutostoptheplaybackofaCDandthen

to continue playback from the same point at a later time. Even if you put

the clock radio into Standby mode or change the radio function, the next

CD play operation will start from the point where playback was previously

stopped. Note that if mains power is removed and restored the Bookmark

setting will be cancelled and the CD will then play from the beginning.

1. When the CD is playing, press the Stop button once. The display will

then show:

Audio CD: The current track number and "Resume".

MP3 / WMA CD: The ﬁle number and "Resume".

You can then put the radio into standby or select an alternative function.

2. If you wish to cancel the Bookmark function, either press the Stop

button a second time when the radio is in CD mode, or simply take

out the CD.

3. To take out the CD, lift up the CD door on the unit. The CD door should

only be opened when the CD player is in stop mode.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Selecting a track

1. Audio CD: While the CD is playing, press either the Skip Up or Down

buttons to change the desired track. You can also skip to a wanted

track when the player is in stop mode. Press the Play/Pause/Select

button to play the selected track.

2. MP3 / WMA CD: While the CD is playing, press either the Memory/

Album Up or Down buttons to change to the desired album / folder,

then press either the Skip Up or Down buttons to change to the

desired track. You can also skip albums or tracks when the player is in

stop mode. Press the Play/Pause/Select button to play the selected

track.

Search function

1. While the CD is playing, press and hold down either the Skip Up or

Down button. Release the button when the desired part of the track

is reached.

CD repeat mode

1. Whilst the CD is playing press the Intro/Repeat button. The radio will

step through the following options:

Audio CD: Repeat 1

Repeat ALL

Normal Play

Repeat

MP3 / WMA CD: Repeat 1

ALL Normal Play

Repeat Album

2. The display will show the currently selected repeat mode.

CD Intro mode

1. When in the stop mode, press the Intro/Repeat button once to play

the ﬁrst 10 seconds of each of the tracks on the disc. "Intro" appears

on the display.

2. To cancel the Intro mode, press the Intro/Repeat button.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

CD Random play

1. While the CD is playing, press the Prog/Random button to play all

tracks on the CD in random order. "RAND" will appear on the display.

The tracks are played in random order until all tracks have been

played.

1,2

2. PresstheProg/Randombuttonagaintoreturntonormalplay."RAND"

will disappear from the display.

Creating a play list (Program Play - audio CD only)

By programming the player you can play up to 20 tracks in any desired

order.

1. Whilst the CD is in Stop mode, press the Prog/Random button. The

display will show "P-01".

Audio CD: Select the ﬁrst track using the Skip Up or Down buttons.

"PROG" will ﬂash on the display. Store this track by pressing the

Prog/Random button.

2. Repeat the above steps until you have completed your program.

3. Press the Play/Pause/Select button to commence play of selected

tracks.

Note: Programme play is available on original Audio CDs, and CDDA

audio on CD-R or CD-RW discs only. MP3 / WMAplayback cannot be

programmed.

Checking and Editing a programme

Whilst the CD is in stop mode, you can check and edit the program.

1. Press the Prog/Random button repeatedly. The display will show

the play list that you have have already programmed.

2. You can edit the playlist. When the desired track that you want to edit

is reached, follow the procedure for creating a playlist page 23.

Erasing a programme

1. Press the Stop button when in programme mode to erase the

programme. Programmes are also erased by putting the radio into

to standby or radio mode.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Alarm mode

Your clock radio has four alarms which can be set to wake you by radio

(FM or DAB), CD or beep type alarm. Each alarm can be set to sound:

Once only

Everyday

Monday to Friday

Monday to Saturday

Saturday to Sunday

The alarms can only be set with the radio in standby mode. In the event

of a power failure the alarm settings will be retained for up to 24 hours.

Note: If no buttons are pressed for 10 seconds, the clock radio will exit the

alarm setup. To exit the alarm menu at any time press the Menu button.

1,3

1. Press and hold the Alarm button for 3 seconds. "Alarm" appears

with "1" ﬂashing on the display.

2. Press the Skip Up or Down buttons to select between Alarm 1 to

2,4

3. Press the Alarm button to enter the Alarm setup.

4. The hours digits will ﬂash on the display. Press the Skip Up or Down

buttonstoselectthedesiredalarmhour, thenpresstheAlarmbutton

to conﬁrm the setting.

5. The minute digits will ﬂash on the display. Press the Skip Up or Down

buttons to select the desired alarm minute.

6. Press the Alarm button to conﬁrm the setting and to enter the alarm

day option menu. You can select between once, daily, Mon-Fri, Mon-

Sat and Sat-Sun.

Display

Once

(Once) - Will sound at one time only

Mon-Sun

Mon-Fri

Mon-Sat

Sat-Sun

(Daily)

(1-5)

(1-6)

(6-7)

- Will sound every day

- Will sound every weekday

- Will sound from Monday to Saturday

- Will sound only on weekends

7,9

7. Press the Skip Up or Down buttons to select the desired Alarm day

option.

8. Press the Alarm button to conﬁrm the alarm day setting and to enter

the alarm mode selection menu.

8,9

9. Press the Skip Up or Down buttons to select the desired alarm

mode. You can choose between OFF, BUZZER, DAB, CD and FM.

Then press the Alarm button to conﬁrm the setting. When the alarm

mode is set to "OFF" the alarm will be disabled.

10. Then "Snooze 5 minutes" will be shown on the display. Press the

Skip Up or Down buttons to select the desired snooze timer from

5, 10,15 and 20 minutes. Then press the Alarm button to conﬁrm the

setting.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

11. When the clock radio display is set to show both time and date the

alarm symbol will appear if an alarm is set. To toggle between the

large time display and the time and date display press the Display

button.

Note: When the alarm is set to wake by radio, the last used station will be

switched on at the alarm time. The radio alarm volume will be the volume

previously listened to when setting up the alarm.

Whenthealarmactivates,thevolumewillstartfromminimumandincrease

in level every 2-3 seconds. The alarm will sound for 90 minutes unless

cancelled.

Make sure that a CD has been inserted when choosing CD as the alarm

mode. If a CD is not present at the alarm time, the buzzer alarm will be

used instead.

View the alarm time

1. Repeatedly press the Alarm button to view the time settings for

Alarm 1 to Alarm 4.

To cancel the alarm

1. Whileanalarmissoundingitcanbecancelledfor24hoursbypressing

the On/Off button.

2. To permanently cancel an alarm, enter the alarm setup menu for the

alarm that you wish to cancel, and set the alarm mode to the "OFF"

option (see step 9 on the preceding page).

Sleep function

Your clock radio can be set to turn off after a preset time has elapsed.

The sleep setting can be adjusted between 0 and 90 minutes in 10 minute

increments.

1. To set the desired sleep time, press the Sleep button to enter the

sleep setup. "Sleep 90" will be displayed.

2. Repeatedly press the Sleep button to adjust the sleep countdown

timer to the desired duration, ranging from 0-90 minutes in 10 minute

increments. The sleep timer will be set to the displayed time.

2,3

If the clock radio is in standby mode when the Sleep button is ﬁrst

pressed then it will be switched on for the selected time. If the radio

is already on, then it will simply switch off after the selected time.

3. During the sleep timer countdown period, press the Sleep button

to view the remaining time as needed or to change the sleep timer

setting.

4. Your clock radio will switch off after the preset sleep time has

elapsed.

5. To cancel the sleep function and switch off the radio before the preset

time has elapsed, press the On/Off button or the Snooze button.

To cancel the sleep timer and leave the radio switched on, repeatedly

press and release the Sleep button to set the sleep timer to 0

minutes.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Snooze

1. When the alarm sounds, pressing the Snooze button will silence the

alarm for the number of minutes speciﬁed for that particular alarm.

2. The snooze setting can be adjusted between 5, 10, 15 and 20 minutes

in 5 minute increments in the Alarm settings (see pages 25-27).

Dimmer

1. Press the Dimmer button to change the backlight illumination level

between high, low and off settings.

Clock display

When in Standby your clock radio has two display modes, time or time

and date combined.

1. If your clock radio is switched on, press the On/Off button to switch

your clock radio to the standby mode.

2. To toggle between the two display modes press the Display

button.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Software version

The software display cannot be altered and is just for your reference.

1. To view which software version your clock radio has ensure your clock

radio is in DAB mode and press the Menu button to enter the menu

setup.

2. Press the Skip Up or Down buttons until "SW Version" together with

the Version number appears on the display.

System Reset

If your radio fails to operate correctly, or some digits on the display are

missing or incomplete, carry out the following procedure.

1. While in DAB or FM mode press and hold the Menu button until the

display shows "Press SELECT to conﬁrm reset".

2. Press and release the Select button to select system reset.

A full reset will be performed and the station list together with any preset

stations will be erased.

Incaseofmalfunctionduetoelectrostaticdischarge,justresettheproductto

resumenormaloperation.Itmaybenecessaryinsomecasestodisconnect

the mains power and then reconnect after 10 seconds.

In case of malfunction due to electrical fast transient (Burst), just reset the

product (reconnect of power source may be required) to resume normal

operation.

Headphone socket

1. A 3.5mm Headphone Socket is provided on the rear of your clock

radio for use with headphones to permit private listening. Inserting a

plug automatically mutes the internal loudspeakers.

2. Adjust the volume on the clock radio as needed.

Pleasebeawarethatthesensitivityofheadphonescanvarywidely.We

therefore recommend setting volume to a low level before connecting

headphones to the clock radio.

IMPORTANT:Excessivesoundpressurefromearphonesandheadphones

can cause hearing loss.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

IMPORTANT:

General

•

The mains adaptor is used as the means of connecting the clock

radio to the mains supply. The mains socket used for the clock radio

must remain accessible during normal use. In order to disconnect the

clock radio from the mains completely, the mains adaptor should be

removed from the mains socket outlet completely.

Do not allow this clock radio to be exposed to water, steam or sand. Do

not leave your radio where excessive heat could cause damage. It is

recommended that the DAB band be used wherever possible as better

results in terms of quality and freedom from interference will usually be

obtained than on the FM band.

•

The clock radio shall not be exposed to dripping or splashing and that

no objects ﬁlled with liquids, such as vases, shall be placed on the

radio.

•

The name plate is located on the underside of your clock radio.

It is recommended to operate the product such that there is a minimum

distance (10cm recommended) to adjacent objects in order to ensure

good ventilation.

The ventilation of the product should not be restricted by covering it or

its ventilation openings with items such as newspapers, table-cloths,

curtains etc.

•

No naked ﬂame sources such as lighted candles should be placed on

the product.

It is recommended to avoid using or storing the product at extremes

of temperature. Avoid leaving the unit in cars, on window sills in direct

sunlight etc.

•

The clock radio must be used in a moderate climate.

Speciﬁcations

Circuit features

Loudspeakers

Power Requirements

2 x 78mm

Mains

AC 230 volts, 50Hz

only

Output power

Frequency Coverage

DAB

87.5-108MHz

174.928 - 239.200MHz

Headphone socket

Aerial System

3.5mm dia

Wire aerial

DAB

The Company reserves the right to amend the speciﬁcation without notice.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Notes

......................................................................................................................................................................................................

Notes

......................................................................................................................................................................................................

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Notes

......................................................................................................................................................................................................

Guarantee

This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component

breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free

of charge.

The guarantee does not cover:

1. Damage resulting from incorrect use.

2. Consequential damage.

3. Receivers with removed or defaced serial numbers.

Procedure:

Any claim under this guarantee should be made through the dealer from whom the instrument was purchased. It is likely that your Roberts' dealer

will be able to attend to any defect quickly and efﬁciently but should it be necessary the dealer will return the instrument to the Company’s service

department for attention. In the event that it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please contact

Roberts Radio Technical Services at the address shown overleaf.

These statements do not affect the statutory rights of a consumer.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

ROBERTS RADIO TECHNICAL SERVICES

97-99 Worton Road

Isleworth Middlesex

TW7 6EG

Technical Helpline :- 020 8758 0338 (Mon-Fri during ofﬁce hours)

Website: http://www.robertsradio.co.uk

Issue 1

Sony DVP C675D User Manual
Sony CDX GT212 User Manual
SIIG 104 0561C User Manual
SIIG 04 0288E User Manual
Seagate ST960822A User Manual
Seagate Pipeline HD ST3320413CS User Manual
Seagate DB353 SERIES ST3400820SCE User Manual
Samsung Genoa User Manual
Research In Motion Blackberry Cell Phone 9860 User Manual
Onkyo CS 420 User Manual