XPRESS
E
5800 ST8000
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
D i s k E x p a n s i o n U n i t
U s e r ' s G u i d e
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Copyright © 1998 Packard Bell NEC, Inc.
Trademarks
nStor and the nStor logo are trademarks or registered trademarks of nStor Corporation, Inc.
TolerANT is a registered trademark of Symbios Logic.
Microsoft® Windows®, and Microsoft® Windows NT™ are registered trademarks or trademarks of
Microsoft Corporation in the United States and/or in other countries.
NetWare and Novell are registered trademarks of Novell,Inc.
SCO UNIX is a registered tademark of Santa Cruz Operations, Inc.
MS-DOS is a registered trademark of Microsoft Corporation.
Mylex is a registered trademark of Mylex Corporation
Other product and company names are registered trademarks and trademarks of their respective holders.
Printed in the United States of America.
PN: 102157
3/98
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Contents
1 Introduction ................................................................1
Welcome .........................................................................1
Features..........................................................................1
Where to Find Answers .....................................................3
Front Panel Components ...................................................4
Operator Control Panel ....................................................4
Power-On LED ................................................................5
Status Indicator LEDs ......................................................6
Alarm Speaker ................................................................7
Door Lock.......................................................................7
Status LEDs ...................................................................7
Activity LEDs ..................................................................8
Rear Panel Components....................................................9
I/O Interface Card ......................................................... 10
Power Cord Connector and Fuse..................................... 10
Internal Components....................................................... 11
Hot Swappable Disk Drives............................................. 12
Power Switch ................................................................ 12
Fault LEDs ................................................................... 13
SAF-TE Card ................................................................ 13
Hot Swappable Cooling Fans .......................................... 13
Hot Swappable Power Supplies....................................... 14
Configuration Modules ................................................... 15
SAF-TE ........................................................................ 16
2 Installation ................................................................ 17
Setup ............................................................................ 17
Guidelines .................................................................... 18
Rack-Mount Subsystem Assembly ................................... 19
Component Installation .................................................. 21
Cabling Configuration ..................................................... 25
Termination .................................................................. 26
Cables ......................................................................... 27
Ultra Wide SCSI Mode ................................................... 28
Other Configurations....................................................... 32
3 Using the DEU........................................................... 33
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Power-On Self Diagnostics .............................................. 33
RAM Read/Write, ROM Checksum, and Register
Read/Write Failures ...................................................... 34
RAM Checksum Failure.................................................. 34
SCSI Bus Access Failure ............................................... 35
LED Descriptions............................................................ 36
Operator Control Panel ................................................... 37
Startup Screens ............................................................ 38
System Status Icon ....................................................... 39
Main Menu.................................................................... 40
Hardware Menu ............................................................. 41
Options Menu ............................................................... 45
Heat Threshold ............................................................. 48
SAFTE CHAIN ID .......................................................... 49
Change Passcode.......................................................... 50
Unlock Options.............................................................. 51
4 Maintenance .............................................................. 53
Replacing a Disk Drive.................................................... 53
Replacing a Power Supply ............................................... 54
Replacing the Cooling Fans ............................................. 56
Replacing the DEU Cabinet ............................................. 58
Replacing a Fuse ........................................................... 59
5 Troubleshooting ....................................................... 61
A Certificate and Agency Information ...................... 65
FCC Radio Frequency Interference Statement ................... 65
Power Cord Selection ..................................................... 67
B Glossary..................................................................... 69
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
C Technical Information ............................................. 73
Specifications ................................................................ 73
Connectors and Jumpers................................................. 75
Connectors ................................................................... 75
Jumpers ....................................................................... 77
D Option Cards............................................................. 85
Introduction ................................................................... 85
Features........................................................................ 86
Quick Install .................................................................. 87
DEU Subsystems Installations ......................................... 88
Setup ........................................................................... 88
Single-Ended Ultra Wide SCSI ........................................ 93
Differential Ultra Wide SCSI ......................................... 105
Default Configurations ................................................. 117
Option Card Specifications ............................................ 118
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
xxxx
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
1 Introduction
Welcome
Con gr a t u la t ion s on t h e pu r ch a se of you r n ew ST8000
Disk E xpa n sion U n it (DE U ). Th e DE U pr ovides a
su per ior fa u lt -t oler a n t n et wor k st or a ge solu t ion in a
su bsyst em -ba sed SAF -TE com plia n t RAID en closu r e.
Th e SAF -TE com plia n t in t er fa ce pr ovides a st a n da r d,
n on -pr opr iet a r y m ea n s for t h e RAID su bsyst em t o
a u t om a t ica lly in t egr a t e wit h per iph er a l pa ck a gin g t h a t
su ppor t s st a t u s sign a ls, h ot swa ppin g dr ives a n d
en closu r e m on it or in g. Com bin ed wit h t h e en t er pr ise-
wide RAID m a n a gem en t soft wa r e, a ddit ion a l levels of
fa u lt t oler a n ce ca n be m a in t a in ed.
Th e DE U is a n eigh t dr ive en closu r e design ed t o
su ppor t a h ost syst em -ba sed a r ch it ect u r e. Th e
a r ch it ect u r e su ppor t s U lt r a Wide SCSI (F a st -20).
Features
Th e followin g a r e m a jor fea t u r es of t h e DE U disk a r r a y
su bsyst em :
R AI D L e v e l s — Su ppor t s RAID levels 0, 1, 3, 5, 10
(1 + 0), 30, a n d 50.
C o n fi g u r a t i o n — Desk side t ower -ba sed syst em a n d
r a ck -m ou n t syst em (fit s in t o a st a n da r d IAE 19-in ch
r a ck a ssem bly). Du a l-Bu s or Sin gle-Bu s
con figu r a t ion m odu les pr ovide for a n “ea sy” P CB
plu g-in ch a n gea ble bu s con figu r a t ion .
D r i v e S u p p o r t — U p t o eigh t 3.5-in ch , h a lf-h eigh t
for m fa ct or , h ot swa ppa ble dr ives t h a t u se SCA-II
t ech n ology. Disk dr ives fea t u r ed in clu de h igh
per for m a n ce 7,200 a n d 10,000 RP M U lt r a SCSI h a r d
disk s.
S c a l a b l e C a p a c i t i e s — Dr ive ca pa cit ies a r e
expa n da ble a n d even fu r t h er expa n sion t h r ou gh
da isy-ch a in in g of m u lt iple ca bin et s.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
H o t S w a p P o w e r S u p p l i e s — Du a l h ot swa ppa ble
power su pplies expa n da ble t o t h r ee, a ll wit h cu r r en t
sh a r in g cir cu it r y. P ower su pply syst em pr ovides
m on it or in g a n d sequ en cin g.
C o o l i n g — Du a l h igh ca pa cit y coolin g fa n s.
N o t i fi c a t i o n s — LE Ds a n d a u dible a la r m s pr ovide
fa ilu r e n ot ifica t ion s.
In side door pa n el F a u lt LE Ds pr ovide dr ive fa ilu r e
iden t ifica t ion .
F r o n t P a n e l — A pa sswor d pr ot ect ed Oper a t or
Con t r ol P a n el (OCP ) for a dm in ist r a t ion con t r ol a n d
m on it or in g fu n ct ion s, in clu din g con t r ol of SCSI ID
set t in gs. An im a t ed OCP icon s for a n “a t -a -gla n ce”
det er m in a t ion of syst em st a t u s.
O p t i o n C a r d s — F u ll su ppor t for Opt ion ca r ds
a va ila ble in Differ en t ia l Con ver t er a n d U lt r a
E xt en der ver sion s pr ovidin g da t a t r a n sfer r a t es u p
t o 40 MBs per secon d. Bot h su ppor t eit h er sin gle or
du a l bu s Differ en t ia l SCSI a n d U lt r a SCSI
a pplica t ion s.
T e r m i n a t i o n — Opt ion ca r ds con figu r ed for
a u t om a t ic SCSI-bu s t er m in a t ion .
R e m o t e /D e l a y S t a r t — A ba ck pla n e ju m per
pr ovides for su bsyst em con t r ol of disk dr ive spin u p
dela y wh en t h e a da pt er does n ot su pply t h is
fea t u r e.
S C S I -t o -S C S I S u p p o r t — Su ppor t for a n U lt r a S2S
RAID Con t r oller pr ovidin g on -boa r d U lt r a SCSI-t o-
U lt r a SCSI RAID pr ocessin g.
L o c k i n g D o o r — A k ey-lock in g fr on t door t h a t
det er s u n a u t h or ized a ccess t o t h e dr ives,
con t r oller s, a n d power swit ch .
S AF -T E — Com plet e su ppor t of SAF -TE v1.0
st a n da r ds (SCSI Accessed F a u lt Toler a n t E n closu r e)
pr ot ocol.
C l u s t e r -R e a d y — Clu st er -r ea dy su bsyst em (r efer
t o t h e U lt r a S2S U ser ’s Gu ide).
O S S u p p o r t — Su ppor t s t h e followin g OS
pla t for m s: N ovell N et Wa r e, Micr osoft ® Win dows
N T™, a n d SCO U N IX com pa t ible.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
S t o r a g e M a n a g e m e n t S o l u t i o n — E n t er pr ise-
wide m a n a gin g a n d m on it or in g soft wa r e.
Where to Find Answers
Wh en you h a ve qu est ion s a bou t you r DE U t h er e a r e
sever a l pla ces you ca n look t o fin d a n swer s. Refer t o
t h e followin g:
I n t h i s g u i d e : Th is u ser ’s gu ide pr ovides det a iled
in for m a t ion for in st a llin g a n d u sin g t h e DE U disk
a r r a y su bsyst em . Th e m a n u a l a ssu m es t h a t t h e
r ea der is a lr ea dy fa m ilia r wit h t h e oper a t in g syst em
en vir on m en t s wh er e t h e DE U will be in st a lled.
S e r v e r C a r e ™ S e r v i c e S u p p o r t P r o g r a m G u i d e :
U se t h is m a n u a l t o loca t e t eleph on e n u m ber s for
cu st om er ser vice, t ech n ica l su ppor t , a n d con dit ion s
of t h e lim it ed wa r r a n t y.
U l t r a S 2S R AI D C o n t r o l l e r U s e r ’s G u i d e :
U se t h is m a n u a l for pr ocedu r es t o in st a ll a n d u se
t h e U lt r a S2S RAID Con t r oller (DAC960SX), t h e
S2S In t er fa ce ca r d, a n d t h e soft wa r e u t ilit y for ea ch
specific oper a t in g syst em .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Front Panel Components
Th e DE U fr on t pa n el com pr ises seven m a jor
com pon en t s: Oper a t or Con t r ol P a n el, P ower -On
In dica t or LE D, St a t u s In dica t or LE Ds, Ala r m Spea k er ,
Door Lock , St a t u s LE Ds, a n d Act ivit y LE Ds.
Operator Control
Panel (OCP)
Speaker
Status Indicator LEDs
Channel Mode LED
Door Lock
Power Supply LED
Fan Status LED
Power-On LED
Status Indicator LEDs
Note: LEDs normally visible
only when illuminated,
shown here for identification.
Activity LEDs
Status LEDs
Operator Control Panel
Th e Oper a t or Con t r ol P a n el (OCP ) pr ovides for t h e
con t r ol a n d m on it or in g ca pa bilit ies of t h e DE U disk
dr ives, power su pplies, fa n s, a n d pr ocessor . F r om t h e
pa n el’s in t er fa ce, t h e u ser ca n ch a n ge SCSI IDs for t h e
dr ives a n d SAF -TE pr ocessor , m on it or t h e ca bin et
t em per a t u r e a n d ch a n ge t h e t em per a t u r e t h r esh old for
t h e m on it or in g syst em .
Ot h er m en u fu n ct ion s pr ovide for viewin g com pon en t
syst em st a t u s, silen cin g t h e a u dible a la r m , est a blish in g
a pa sswor d pr ot ect ion , det er m in in g wh ich fea t u r e ca r ds
h a ve been in st a lled, est a blish in g in t r a -ca bin et
com m u n ica t ion s (m a st er /sla ve) a n d r ea din g fir m wa r e
in for m a t ion .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Th e OCP pr ovides a fou r lin e by t wen t y ch a r a ct er
displa y. Th er e a r e five fu n ct ion k eys for a m en u dr iven
in t er fa ce.
An a n im a t ed icon will a ppea r on a st a t ic displa y a n d
pr ovides a n “a t -a -gla n ce” look a t syst em st a t u s. Wh en a
“h a ppy” a n im a t ed fa ce a ppea r s, a ll syst em s a r e
in dica t in g a n om in a l st a t e. Wh en t h e a n im a t ed fa ce
ch a n ges t o a “sa d” fa ce, t h e syst em in dica t es t h a t a
pr oblem h a s been det ect ed a n d r equ est s you r a t t en t ion .
Th e “power syst em ” st a t u s will displa y t h e t ot a l power
a va ila ble per dr ive slot in r edu n da n t a n d n on -
r edu n da n t m ode. A m a xim u m su ppor t ed va lu e of 30
wa t t s per dr ive ba y is a va ila ble in eit h er m ode. Th e
u ser ca n a lso view in dividu a l power su pply st a t u s a n d
con figu r a t ion s.
Ca bin et t em per a t u r e is m ea su r ed wit h in t h e dr ive ba y
a r ea bet ween dr ive slot s 2 a n d 3, a n d slot s 7 a n d 8. By
sen sin g ca bin et t em per a t u r e in t h ese loca t ion s, t h e
syst em pr ovides t h e m ost sen sit ive m ea su r em en t for
m a xim u m pr ot ect ion . Th e t em per a t u r e is displa yed in
bot h Celsiu s a n d F a h r en h eit . A SAF -TE pr ocessor
m on it or s t h e per for m a n ce of ea ch of t h e fa n s via t a ch
pu lses wh ich t r a ck s t h e speed of ea ch fa n im peller . Th e
OCP displa ys in for m a t ion a bou t t h e speed of ea ch fa n .
F a n speed is con t r olled via t h e in t er n a l ca bin et
t em per a t u r e, r efer en ced fr om t h e u ser -est a blish ed
t em per a t u r e t h r esh old.
Power-On LED
Th e P ower -On LE D sign ifies t h a t t h e DE U syst em h a s
power a pplied.
Status Indicator LEDs
Th er e a r e t h r ee St a t u s In dica t or LE Ds t o a ssist t h e
u ser in det er m in in g t h e cu r r en t st a t e of t h e DE U
su bsyst em . Th e followin g su bsect ion s descr ibe ea ch
LE D.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Channel Mode
Th e Ch a n n el Mode LE D in dica t es t h e st a t u s of t h e
a r r a y su bsyst em by ch a n ges in it s color a n d st a t e.
Wh en illu m in a t ed st ea dy gr een , t h e LE D in dica t es
n or m a l a r r a y a ct ivit ies.
Wh en t h e LE D ch a n ges t o a m ber (fla sh in g or st ea dy) it
in dica t es a bn or m a l a ct ivit ies, for m or e in for m a t ion see
LE D Descr ipt ion s descr ibed la t er in t h is gu ide.
Power Supply Status
Th e P ower Su pply St a t u s LE D in dica t es t h e con dit ion
of t h e power su pplies by ch a n ges in it s color . Th e LE D
will illu m in a t e st ea dy gr een wh en a ll t h e power
su pplies a r e fu n ct ion in g n or m a lly a n d will ch a n ge t o
a m ber if on e of t h e power su pplies sh ou ld fa il. Th e LE D
will a lso swit ch t o a m ber if t h e power syst em is in a
n on -r edu n da n t st a t e. A fa iled com pon en t ca n be
iden t ified via t h e Oper a t or Con t r ol P a n el a n d t h e la ck
of a “DC Good” LE D loca t ed on ea ch power su pply u n it .
Fan Status
Th e F a n St a t u s LE D in dica t es t h e con dit ion of t h e
coolin g fa n s by ch a n ges in it s color . Th e LE D will
illu m in a t e gr een wh en a ll of t h e fa n s a r e fu n ct ion in g
n or m a lly a n d will ch a n ge t o a m ber if a n y of t h e fa n s
sh ou ld fa il.
Wh en a fa iled com pon en t is pr esen t , u se t h e Oper a t or
Con t r ol P a n el t o iden t ify t h e fa iled fa n , see H a r d wa r e
Men u descr ibed la t er in t h is gu ide. Th e fa n s a r e
iden t ified on t h e r ea r door pa n el via pla ca r ded
m a r k in gs.
Alarm Speaker
An a u dible a la r m will sou n d wh en a n y com pon en t ’s
con dit ion ch a n ges t o a n a bn or m a l st a t e. Th e St a t u s
In dica t or LE Ds will pr ovide a gen er a l a r ea of fa ilu r e by
t h e LE D con dit ion (color a n d/or st a t e), a n d t h e fa iled
com pon en t ca n t h en be iden t ified u sin g t h e Oper a t or
Con t r ol P a n el.
To silen ce t h e a la r m , a ccess t h e con t r ol pa n el a n d
select “Tu r n Off Ala r m ”, see Ma in Men u descr ibed la t er
in t h is gu ide.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Door Lock
Th e fr on t door h a s a n in t egr a l lock t h a t a lso ser ves a s
a door h a n dle. In a ddit ion , t h e door lock pr ovides
secu r it y t o det er u n a u t h or ized a ccess t o t h e in t er n a l
com pon en t s. Two k eys a r e pr ovided wit h t h e syst em .
To u n lock t h e door , in ser t t h e k ey a n d t u r n it in a
cou n t er clock wise dir ect ion . To lock t h e door , t u r n t h e
k ey in a clock wise dir ect ion .
Status LEDs
Th er e a r e eigh t St a t u s LE Ds loca t ed in t h e win dows on
t h e fr on t pa n el (for t h e r a ck -m ou n t syst em t h ey a r e t h e
lower set of LE Ds a n d for t h e t ower -ba sed syst em will
be t h e set on t h e left h a n d side).
Th ese LE Ds, in con ju n ct ion wit h a n a ppr oved RAID
con t r oller , will in dica t e t h e st a t u s of t h a t specific disk
dr ive. Th e con dit ion of t h e dr ive is in dica t ed by t h e
LE D’s st a t e (fla sh in g or st ea dy) a n d/or color (a m ber or
gr een ).
F or m or e in for m a t ion on in t er pr et in g t h ese in dica t ion s,
see LE D Descr ipt ion s descr ibed la t er in t h is gu ide.
Activity LEDs
Th er e a r e eigh t Act ivit y LE Ds loca t ed in t h e win dows
on t h e fr on t pa n el (for t h e r a ck -m ou n t syst em t h ey a r e
t h e u pper set of LE Ds a n d for t h e t ower -ba sed syst em
t h ey will be t h e set on t h e r igh t h a n d side). Th ese
LE Ds displa y a specific dr ive’s a ct ivit y, su ch a s r ea ds
or wr it es.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Rear Panel Components
Th e DE U r ea r pa n el com pr ises fou r m a jor com pon en t s:
I/O In t er fa ce ca r ds, power cor d con n ect or m odu le, fu se,
a n d a ccess door s t o power su pplies a n d fa n s.
VHD SCSI
Connector
I/O Interface Card
Power Supply #3
with PSU Cover Plate
PSU “DC Good” LED
Fuse
AC Power Cord
Connector
Rear Door Fastener
Rear Door Panel
AC Power Cord
Retainer
I/O Interface Card
VHD SCSI
Connector
Card Handle
I/O Interface Card
Th e I/O In t er fa ce ca r d m a k es u p t h e con n ect ion fr om
t h e su bsyst em ’s bu s t o t h e RAID con t r oller . Loca t ed on
t h e I/O In t er fa ce ca r d a r e t wo 68-pin ver y h igh den sit y
(VH D) SCSI con n ect or s. Th ey pr ovide t h e in t er fa ce
con n ect ion fr om t h e su bsyst em bu s t o t h e RAID
con t r oller or h ost a da pt er . Th e con n ect or s a r e la beled
Ch a n n el 0 a n d Ch a n n el 1.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Th e I/O In t er fa ce ca r d in cor por a t es bu ilt -in a u t om a t ic
SCSI t er m in a t ion . Wh en t h e da t a ca ble is plu gged in ,
t h e syst em a u t om a t ica lly sen ses t h e con n ect ion a n d
pr ovides t h e r equ ir ed SCSI t er m in a t ion .
Two set s of ju m per s a r e pr ovided on t h e ca r d. On e set
r ou t es Ter m P ower in t h e even t t h a t t h e h ost con t r oller
is n ot pr ovidin g it .
Th e n ext set of ju m per s a ddr esses a specific set of
con t r oller s t h a t u se t h e DE C F a u lt Bu s pr ot ocol. If you
a r e u sin g a DE C syst em wh er e t h e con t r oller u ses t h is
pr ot ocol, you will n eed t o ju m per loca t ion s (ju m per on
bot h pin s) J P 3 a n d J P 4 for ea ch ch a n n el t h a t h a s a n
ext er n a l SCSI ca ble con n ect ed. Th is will disa ble
t er m in a t ion a t t h a t poin t .
If you a r e u sin g a st a n da r d h ost a da pt er t h a t pr ovides
Ter m P ower , n o ch a n ge is r equ ir ed a n d SCSI bu s
t er m in a t ion will occu r a u t om a t ica lly.
Power Cord Connector and Fuse
Th e power cor d con n ect or su pplies t h e AC power t o t h e
DE U t h r ou gh a power cor d con n ect ed t o a con ven t ion a l
t h r ee-h ole gr ou n ded ou t let or power st r ip. A 250V 10
a m p fu se is pr ovided t o pr ot ect t h e syst em fr om a n y
elect r ica l fa u lt .
Internal Components
Th er e a r e seven pr im a r y in t er n a l com pon en t s: disk
dr ives (u p t o eigh t ), F a u lt LE Ds, power swit ch , SAF -TE
ca r d, h ot swa ppa ble coolin g fa n s, h ot swa ppa ble power
su pplies, a n d con figu r a t ion m odu le (Du a l-Bu s or
Sin gle-Bu s).
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Optional Bay for
Ultra S2S RAID Controller
SAF-TE Card
Fault LEDs
Power On/Off
Switch
Hard Disk Drive
Drive Rails
Note: Cover shown cut-away
to illustrate recessed power switch.
I/O Interface Card
Cooling Fan #2
Power Supply #3
with PSU Cover Plate
Cooling Fan #1
Power Supply #2
I/O Interface Card
“DC Good” LED
Power Supply #1
Hot Swappable Disk Drives
Th e DE U u ses h igh per for m a n ce, 3.5-in ch for m fa ct or
h ot swa ppa ble disk dr ives. Th e dr ives a r e design ed t o
oper a t e on Sm a ll Com pu t er Syst em In t er fa ce (SCSI)
a n d a r e SCSI-3/SCSI-2 com m a n d com pa t ible.
E a ch dr ive h a s a n 80-pin Wide Sin gle Con n ect or
At t a ch m en t (SCA-II) in t er fa ce, design ed t o a llow t h e
dr ive t o be h ot plu gged dir ect ly in t o t h e ba ck pla n e.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Th e dr ive m ou n t in g design in cor por a t es a r a il syst em
wit h bu ilt -in con n ect or s m a k in g it possible t o “h ot
swa p” a dr ive wit h ou t sh u t t in g down t h e syst em . Th is
design a llows for ea sy in st a lla t ion wit h m in im a l for ce
a n d la t ch in g clips t o secu r e t h e dr ives in t o pla ce.
N o t e : All dr ives in a n a r r a y sh ou ld be of t h e sa m e
ca pa cit y. If t h e dr ives a r e m ixed, a ll of t h e dr ives in
t h e a r r a y a r e a ssign ed t h e ca pa cit y of t h e sm a llest size
dr ive.
Power Switch
Th e power swit ch is loca t ed in side t h e lock in g fr on t
door a n d con t r ols AC power t o a ll of t h e power su pplies.
Th is posit ion in g of t h e swit ch det er s u n a u t h or ized
u ser s fr om power in g down t h e DE U pr ovided t h e door
is lock ed. Th e swit ch is r ecessed t o pr even t in a dver t en t
a ct iva t ion du r in g ser vice a ct ivit y.
Th e swit ch is la beled wit h a “I” for t h e ON con dit ion
a n d “O” for t h e OF F con dit ion a n d is illu m in a t ed wh en
t h e power is on for ea sy iden t ifica t ion . Depen din g on
t h e or ien t a t ion of t h e su bsyst em (i.e., in t h e r a ck
con figu r a t ion ) t h e “I” la bel will a ppea r a s a — a n d
sh ou ld be in t er pr et ed a s t h e ON con dit ion .
Fault LEDs
Dr ive F a u lt LE Ds a r e pr ovided in side t h e fr on t door t o
a ide in iden t ifyin g t h e fa iled (or pr oblem ) disk dr ive.
Th ese LE Ds a r e a lign ed wit h t h eir r espect ive
dr ive/dr ive ba y. An illu m in a t ed LE D (a m ber ) in dica t es
t h e fa iled or pr oblem dr ive.
SAF-TE Card
Th e SAF -TE ca r d con t a in s t h e con t r ol a n d m on it or in g
elect r on ics for t h e su bsyst em ca bin et . It pr ovides t h e
cen t r a l da t a lin k bet ween t h e en closu r e a n d t h e h ost
syst em .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Loca t ed in t h e t ower -ba sed syst em s’ t op ba y or t h e
r a ck -m ou n t syst em s’ fa r left ba y a r e t wo ca r d slot s. Th e
U lt r a S2S RAID Con t r oller (opt ion a l) a n d t h e SAF -TE
ca r d a r e in st a lled in t h ese t wo slot s. Th e U lt r a S2S
RAID Con t r oller will be in st a lled in t h e u pper m ost (or
fu r t h est left ) slot . Th e SAF -TE ca r d is in st a lled in t h e
n ext slot down or t o t h e r igh t .
Hot Swappable Cooling Fans
Th e coolin g syst em con sist s of t wo h igh -per for m a n ce
fa n s fit t ed t o t h e r ea r pa n el. Th ese fa n s dr a w a ir fr om
a h igh pr essu r e plen u m , a cr oss t h e dr ives a n d
elect r on ics of t h e syst em a n d exh a u st ou t t h r ou gh t h e
r ea r door pa n el.
Th e fa n speed is t h er m a lly con t r olled t o pr ovide
r edu ced oper a t in g n oise levels. In t h e even t of a fa n
fa ilu r e or ca bin et t em per a t u r es a ppr oa ch in g t h e
t h r esh old lim it , t h e r em a in in g fa n will swit ch t o
m a xim u m oper a t in g speed.
Ca bin et t em per a t u r e is m ea su r ed wit h in t h e dr ive ba y
a r ea bet ween dr ive slot s 2 a n d 3, a n d slot s 7 a n d 8. Th e
fa n ’s speed a n d a la r m s a r e k eyed t o t h e h igh er of t h e
t wo t em per a t u r es. Th e SAF -TE pr ocessor m on it or s t h e
Access t h e Oper a t or Con t r ol P a n el t o det er m in e t h e
ca u se a n d fa iled com pon en t . Select “H a r dwa r e Men u ”
fr om t h e Ma in Men u a n d ch oose “Com pon en t St a t u s”,
see Oper a t or Con t r ol P a n el descr ibed la t er in t h is
gu ide. Th e fa n s a r e iden t ified on t h e r ea r door pa n el
u sin g a pla ca r d for “F AN 1” a n d “F AN 2.” F or m or e
in for m a t ion on ch a n gin g a coolin g fa n , see Repla cin g
t h e Coolin g F a n s descr ibed la t er in t h is gu ide.
Hot Swappable Power Supplies
U p t o t h r ee 150 wa t t h ot swa ppa ble power su pplies a r e
in cor por a t ed a s pa r t of a fa u lt -t oler a n t design (N +1
power syst em ). E a ch power su pply h a s cu r r en t sh a r e
cir cu it r y wh ich ba la n ces t h e loa d bet ween in st a lled
power su pplies. In t h e even t of a power su pply fa ilu r e,
t h e loa d is t r a n sfer r ed t o t h e r em a in in g power su pplies
wit h ou t in t er r u pt ion t o t h e DE U n or m a l oper a t ion .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
If a fa ilu r e occu r s, t h e P ower Su pply St a t u s LE D will
illu m in a t e a m ber a n d t h e a u dible a la r m will sou n d. Th e
u ser ca n iden t ify t h e fa iled com pon en t by a ccessin g t h e
OCP a n d viewin g t h e “H a r dwa r e St a t u s.” Th e P SU “DC
Good” LE D will n ot be illu m in a t ed on t h e fa iled power
su pply, see Repla cin g a P ower S u pply descr ibed la t er
in t h is gu ide.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Configuration Modules
Th e DE U is a va ila ble in t wo bu s con figu r a t ion s wh ich
is det er m in ed by t h e con figu r a t ion m odu le in st a lled.
Th e Du a l-Bu s m odu le pr ovides for a split bu s design ,
wh ile t h e Sin gle-Bu s m odu le con n ect s bot h SCSI bu ses
t oget h er t h a t ca n be u sed wh en a ll dr ives a r e r equ ir ed
on on e SCSI bu s.
Th e Sin gle-Bu s m odu le is la r ger in ph ysica l size t h a n
t h e Du a l-Bu s m odu le a n d is ea sily iden t ified by a
descr ipt ion silk -scr een ed on t h e m odu le ca r d. It is
loca t ed on t h e ba ck pla n e pr in t ed cir cu it boa r d a n d is
a ccessed fr om t h e r ea r door pa n el.
Th e con figu r a t ion m odu les a r e in st a lled a t loca t ion J P 1
on t h e ba ck pla n e P CB. Th e con n ect or is k eyed a n d t h e
m odu le will in st a ll on ly on e dir ect ion . F or illu st r a t ion
pu r poses, t h e t ower syst em is u sed t o depict t h e
loca t ion of t h e m odu les.
Backplane PCB
(JP1)
NOTE: The cover is cut
Dual-Bus Module
Single-Bus Module
away to demonstrate
the location of the installed
configuration module.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
SAF-TE
Th e DE U is design ed t o be com plia n t wit h SAF -TE
(SCSI Accessed F a u lt -Toler a n t E n closu r e) specifica t ion
ver sion 1.0. U n der t h is specifica t ion , t h e en closu r e is
im plem en t ed a s a n a ssign a ble SCSI t a r get ID. Th is
a llows st a n da r dized a ler t det ect ion a n d st a t u s
r epor t in g u sin g t h e SCSI bu s a s t h e u n der lyin g
t r a n spor t m ech a n ism .
Disk dr ives, power su pplies, coolin g fa n s a n d
t em per a t u r e a r e con t in u a lly m on it or ed a n d t h ese
con dit ion s a r e t h en r epor t ed over t h e SCSI bu s t o t h e
h ost syst em . Wh en u sed in con ju n ct ion wit h RAID
m a n a gem en t soft wa r e, t h e DE U ca n a ler t t h e u ser or
LAN a dm in ist r a t or of im pen din g or im m in en t
con dit ion s r equ ir in g t h eir a t t en t ion . Th ese a ler t
n ot ifica t ion s ca n be m a de via n et wor k br oa dca st or
elect r on ic pa ges, in a ddit ion t o t h e LE Ds a n d Oper a t or
Con t r ol P a n el a ler t s fou n d on t h e DE U . Th is a llows t h e
a dm in ist r a t or t o r ea ct t o con dit ion s t h a t cou ld n or m a lly
go u n n ot iced u n t il da t a loss.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
2 Installation
Setup
Th e in st a lla t ion of you r DE U disk a r r a y su bsyst em is
essen t ia lly a t h r ee-st ep pr ocess: t h e su bsyst em is set u p
a n d it s com pon en t s in st a lled, t h e ca blin g is com plet ed
ba sed on t h e su ppor t ed con figu r a t ion s, a n d t h e a r r a y is
t h en con figu r ed.
Th e DE U is design ed wit h a n open a r ch it ect u r e t h a t
a llows for m a n y possible com bin a t ion s of ca blin g
sch em es. Du e t o t h e in h er en t lim it a t ion s of sa m plin g
a ll of t h e possible con figu r a t ion s, we will pr ovide a few
of t h e m ost t ypica l ca blin g sch em es a n d im plem en t a t ion
of t h e con figu r a t ion m odu les.
Addit ion a l con figu r a t ion s a r e a va ila ble t h r ou gh t h e u se
of U lt r a E xt en der or Differ en t ia l Con ver t er Opt ion
ca r ds. Refer t o Appen dix D for in for m a t ion specific t o
ea ch ca r d a n d con figu r a t ion .
Th is ch a pt er is divided in t o t wo sect ion s: Set u p a n d
Ca blin g Con figu r a t ion . Th e Set u p sect ion pr ovides t h e
in st r u ct ion s for a ssem blin g t h e r a ck -m ou n t su bsyst em ,
a n d in st a llin g t h e h a r dwa r e com pon en t s (con t r oller s,
disk dr ives, power su pplies, et c.,) for bot h r a ck -m ou n t
a n d desk side t ower -ba sed su bsyst em s.
Th e Ca blin g Con figu r a t ion sect ion con t a in s sa m ples of
ca blin g sch em es a n d con figu r a t ion m odu les. If you r
desir ed con figu r a t ion is n ot sh own in t h e sa m ples, r efer
t o t h e exa m ple m ost sim ila r a n d follow t h e ca blin g
t opology sch em es expa n din g t h e exa m ple t o fit you r
n eeds.
Wh en con figu r in g t h e a r r a y, r efer t o t h e U lt r a S 2S
RAID Con t r oller U ser ’s Gu id e pr ovided wit h you r
con t r oller .
If you a r e set t in g u p a r a ck -m ou n t su bsyst em con t in u e
wit h “Ra ck -Mou n t Su bsyst em Assem bly” descr ibed la t er
in t h is gu ide, ot h er wise sk ip t o “Com pon en t
In st a lla t ion ” a lso descr ibed la t er in t h is gu ide.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Guidelines
Befor e in st a lla t ion , you will n eed t o con sider t h e
followin g:
■ Wh en r efer en cin g a com pon en t on t h e r ea r pa n el it is
a ssu m ed t h e u ser is fa cin g t h e r ea r pa n el a n d wh en
r efer en cin g t h e fr on t pa n el com pon en t s t h e
a ssu m pt ion is t h a t t h e u ser is fa cin g t h e fr on t pa n el.
■ In t er ior t em per a t u r e of t h e r a ck ca bin et sh ou ld be
m a in t a in ed a t a m bien t t em per a t u r es bu t m u st n ot
exceed 117°F (47°C) du r in g n or m a l oper a t ion .
■
Rem ove ea ch piece fr om t h e sh ippin g ca r t on , lea vin g
t h e disk dr ives in t h eir a n t i-st a t ic pr ot ect ive
pa ck a gin g u n t il you a r e r ea dy t o in st a ll t h em . Sa ve
t h e pa ck in g m a t er ia ls in ca se you n eed t o sh ip t h e
DE U .
■
Secu r e a ll ca ble con n ect or s u sin g t h e t h u m b scr ews
(fin ger t igh t on ly).
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Rack-Mount Subsystem Assembly
In st a ll t h e DE U in t o a n y st a n da r d IAE 19" r a ck
ca bin et .
C a u t i o n : E n su r e t h a t t h e loca t ion of t h e DE U does n ot
cr ea t e a n u n st a ble con dit ion wh en in st a lled in t h e r a ck
ca bin et en closu r e.
N o t e : Mou n t t h e su bsyst em in t o t h e r a ck en closu r e
befor e in st a llin g t h e disk dr ives. Th is will r edu ce t h e
weigh t r equ ir ed t o su ppor t du r in g in st a lla t ion .
1 Select a n a ppr opr ia t e loca t ion in you r r a ck ca bin et
for t h e DE U . If you a r e in st a llin g m u lt iple syst em s,
r eview t h e ca blin g con figu r a t ion sect ion la t er in t h is
ch a pt er for you r ca ble sch em e t o det er m in e t h e
opt im u m loca t ion .
Support Bracket
Caged Nut
Screw
Washer
Screw
Caged Nut
Caged Nut
Front Bezel
Screw
Plastic
Washer
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
2 Loca t e t h e t wo su ppor t br a ck et s. Mou n t t h e t wo
br a ck et s t o t h e r a ck ca bin et ver t ica ls u sin g t h e fou r
scr ews, t wo wa sh er s, a n d ca ged n u t s pr ovided. Th e
br a ck et h a s a slot t ed h ole a n d a cou n t er su n k h ole.
Mou n t t h e slot t ed h ole on t h e r ea r ver t ica l. Th e
slot t ed h ole r eceives a “pa n h ea d” scr ew wit h a
wa sh er a n d t h e cou n t er su n k h ole r eceives a “fla t
h ea d” scr ew.
N o t e : Th e ca ged n u t s a r e secu r ed in t o t h e r a ck ca bin et
ver t ica l slot s by in ser t in g on e side of t h e n u t in t o t h e
slot a n d squ eeze wh ile pr essin g t h e opposit e side u n t il
it sn a ps in t o pla ce.
3 In st a ll t h e ca ged n u t s t h a t will secu r e t h e fr on t
bezel in st ep (6) pr ior t o in ser t in g t h e DE U in t o t h e
r a ck a ssem bly.
4 Loca t e t h e t wo “D” h a n dle a ssem blies.
a P osit ion a h a n dle a ssem bly on ea ch h a n dle
m ou n t in g br a ck et loca t ed on t h e sides of t h e
ca bin et . Th e h a n dles a r e u n iver sa l a n d will fit
eit h er side.
b Secu r e t h e h a n dles wit h t h e t wo scr ews pr ovided.
5 Lift t h e DE U u p a n d on t o t h e su ppor t br a ck et s
pr eviou sly in st a lled in st ep 2. Slide t h e DE U t owa r d
t h e r ea r of t h e r a ck ca bin et .
6 Secu r e t h e fr on t bezel t o t h e r a ck ver t ica ls u sin g t h e
fou r scr ews a n d pla st ic wa sh er s pr ovided.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Component Installation
C a u t i o n : Disk dr ives a n d pr in t ed cir cu it boa r d
com pon en t s a r e sen sit ive t o elect r ost a t ic disch a r ge. To
pr even t oper a t in g fa ilu r e or da m a ge, obser ve t h e
followin g: E st a blish a gr ou n d for you r self by u sin g t h e
wr ist gr ou n din g st r a p, or by t ou ch in g t h e m et a l ch a ssis
pr ior t o h a n dlin g or in st a llin g t h e dr ives or pr in t ed
cir cu it boa r d com pon en t s.
1
2
Down you r ser ver or power off you r com pu t er syst em
in pr epa r a t ion for in st a llin g t h e con t r oller .
In st a ll t h e RAID Con t r oller in t o you r h ost com pu t er .
F or specific in st r u ct ion s, r efer t o you r h ost syst em ’s
m a n u a l.
Th e con t r oller m u st be in st a lled in slot 1 of t h e h ost
syst em (m a st er slot ) wh en boot in g fr om t h is
con t r oller .
C a u t i o n : E xer cise ca r e wh en h a n dlin g a n y h a r d disk
dr ive. Do n ot dr op, ja r , or bu m p t h e disk dr ives.
3 Rem ove on e of t h e disk dr ives fr om it s a n t i-st a t ic
pr ot ect ive pa ck a gin g.
4 H oldin g t h e dr ive by it s edges, loca t e t h e Dr ive
La t ch in g Clips a n d pu ll ou t on t h e la t ch es t o u n lock
t h em .
Th e Dr ive La t ch in g Clips a r e pla ced in t h e lock ed
posit ion for sh ippin g pu r poses.
5 In ser t t h e disk dr ive in t o t h e dr ive ba y by a lign in g
it s r a ils in t o t h e dr ive ba y slot s, com pon en t side
t owa r d t h e r igh t on r a ck -m ou n t syst em s or
com pon en t side down on t ower -ba sed syst em s.
Du a l-Bu s m odu le: Th e dr ive slot s a r e split in t o t wo
bu ses: on e bu s con n ect s t h e left or u pper fr on t fou r
dr ive slot s a n d t h e ot h er bu s con n ect s t h e r igh t or
lower fr on t fou r dr ive slot s. Th e Sin gle-Bu s m odu le
con n ect s a ll eigh t dr ive slot s t o on e bu s.
Depen din g on wh ich bu s t h e dr ives will be
con figu r ed t o, begin popu la t in g t h e dr ives st a r t in g
wit h t h e fa r r igh t slot or lowest slot for Ch a n n el 0
a n d t h e fift h dr ive slot for Ch a n n el 1.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Populate drive bays from
the lower (right) slot first.
Upper (left) bay,
four drive slots
Drive Label
Lower (right) bay,
four drive slots
Component side
Sin gle-Bu s m odu le: Begin popu la t in g t h e dr ive wit h
t h e fa r r igh t slot or lowest slot a n d wor k t o you r left
or u p.
6 F u lly sea t t h e dr ive by a pplyin g ligh t pr essu r e wit h
you r t h u m b t o t h e fr on t of t h e dr ive.
7 P r ess t h e Dr ive La t ch in g Clips u n t il t h ey ‘sn a p ‘ in t o
pla ce. Th e dr ive is n ow lock ed in t o posit ion .
8 In st a ll t h e r em a in in g dr ives r epea t in g st eps 3
t h r ou gh 7, u n t il a ll t h e dr ives h a ve been in st a lled,
a s desir ed.
Note: Ver ify t h a t t h e power swit ch on t h e DE U is in
t h e OF F posit ion (O).
9 Con n ect on e en d of t h e power cor d t o t h e power
con n ect or on t h e r ea r pa n el a n d t h e ot h er en d t o a
t h r ee-h ole gr ou n ded ou t let or power st r ip. A U P S is
r ecom m en ded.
10 Refer t o t h e Ca blin g Con figu r a tion sect ion a n d
follow t h e pr ocedu r es t o ca ble you r syst em .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Installing the Third Power Supply
If you will be in st a llin g five (5) or m or e disk dr ives you
will be r equ ir ed t o in st a ll t h e t h ir d power su pply.
N o t e : Th er e is n o n eed t o power off t h e DE U or t h e
com pu t er syst em . Th e power su pplies a r e h ot
swa ppa ble.
1 Loosen t h e t wo scr ews on t h e P ower Su pply #3 cover
pla t e u sin g a fla t -bla de scr ewdr iver a n d r em ove t h e
cover pla t e.
2 Rem ove t h e power su pply fr om it s sh ippin g pa ck a ge.
3 In st a ll t h e t h ir d power su pply by slidin g t h e P SU
in t o t h e ca bin et u n t il it r ea ch es it s lock ed posit ion .
Or ien t t h e su pply a s in dica t ed in t h e illu st r a t ion .
N o t e : U se ca r e wh en in ser t in g t h e power su pply in t o
it s fu lly sea t ed posit ion . Do n ot u se a st r on g for ce t o
sea t t h e P SU in t o it s m a t in g con n ect or .
Power Supply #3
4 Rem ove t h e bla n k in g plu g for t h e LE D on t h e cover
pla t e.
5 Re-in st a ll t h e cover pla t e. Secu r e t h e cover pla t e
wit h t h e t wo scr ews u sin g a fla t -bla de scr ewdr iver
secu r in g t h e power su pply.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Cabling Configuration
Th is sect ion pr ovides t h e r ecom m en ded ca ble
con figu r a t ion s wh en oper a t in g t h e DE U in a specific
m ode.
Th e U lt r a Wide SCSI m ode pr ovides en h a n ced
per for m a n ces wit h da t a t r a n sfer s u p t o 40 MBs per
secon d (20 MH z).
N o t e : Be su r e t o en a ble t h e U lt r a SCSI (F a st -20) m ode
in t h e SCSI Ada pt er Set u p.
Th e DE U su ppor t s t h e Am er ica n N a t ion a l St a n da r d
U lt r a SCSI (F a st -20) pa r a llel in t er fa ce st a n da r ds,
r efer r ed t o a s U lt r a Wide SCSI. Th is st a n da r d is
ba ck wa r d com pa t ible wit h F a st SCSI (SCSI-2 wit h t h e
Wide opt ion ), a lso r efer r ed t o a s F a st Wide SCSI.
Th ese st a n da r ds defin e t h e m ech a n ica l, elect r ica l, a n d
t im in g r equ ir em en t s. In com plia n ce wit h t h ese
in t er fa ce st a n da r ds, cer t a in lim it a t ion s a pply wh en
con sider in g t h e con figu r a t ion , len gt h s of ca blin g, a n d
t er m in a t ion . Th e con figu r a t ion sa m ples a n d ca bles
pr ovided wit h t h e su bsyst em m eet t h e r equ ir em en t s of
t h e specifica t ion s. Modifica t ion s t o a n y of t h ese
va r ia bles ca n h a ve less t h a n desir a ble r esu lt s wh en
oper a t in g a n y SCSI device.
Termination
Ter m in a t ion is r equ ir ed a t bot h en ds of t h e SCSI bu s.
Th er e a r e t wo set s of ju m per s on t h e I/O In t er fa ce ca r d.
On e set of ju m per s r ou t es “Ter m P ower ” in t h e even t
t h a t t h e h ost con t r oller is n ot pr ovidin g it . Th e defa u lt
set t in g is t h e u n ju m per ed con dit ion (ju m per offset on
on e pin on ly). Th e secon d set of ju m per s a ddr esses a
specific set of con t r oller s t h a t u se t h e DE C F a u lt Bu s
pr ot ocol. If you r con t r oller u ses t h is pr ot ocol, you will
n eed t o ju m per (ju m per on bot h pin s) a t loca t ion J P 3
a n d J P 4 on t h e ba ck pla n e for t h e in dica t ed ch a n n el
t h a t will be u sed. A ju m per a t eit h er of t h ese loca t ion s
will disa ble t er m in a t ion a t t h a t poin t on t h e SCSI bu s.
If you a r e u sin g a con t r oller t h a t pr ovides Ter m P ower ,
n o ch a n ge is r equ ir ed a n d SCSI bu s t er m in a t ion will
occu r a u t om a t ica lly.
Th e H ost Con t r oller ca r d pr ovides t er m in a t ion for on e
en d of t h e SCSI bu s, wh ile t h e I/O In t er fa ce ca r d
pr ovides fin a l t er m in a t ion a t t h e ot h er en d of t h e bu s.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
JP3 and JP4
Fault Bus Protocol
Jumpers (Add to
disable termination)
Channel 0 and 1
Term Power Jumpers
I/O Interface Card
Cables
Ca ble len gt h is a n ot h er con sider a t ion wh en con figu r in g
t h e su bsyst em s.
Wh en con sider in g t h e t ot a l len gt h of you r ca blin g
r equ ir em en t s, t h e in t er n a l len gt h of ca bles a n d pr in t ed
cir cu it boa r d t r a ces (k n own a s t h e in t er n a l ca ble
len gt h ) m u st be su bt r a ct ed fr om you r t ot a l ca ble
len gt h . Th e DE U in t er n a l ca ble len gt h is 36 in ch es.
F or U lt r a Wide SCSI, t h e t ot a l SCSI ca ble len gt h is 3
m et er s (118 in ch es) wit h fou r dr ives a n d 1.5 m et er s (59
in ch es) wit h eigh t dr ives. Aft er su bt r a ct in g t h e
in t er n a l len gt h of 36 in ch es t h e r em a in in g ca ble len gt h
is 82 in ch es or a ppr oxim a t ely 6.83 feet (2.08 m et er s) for
fou r dr ives a n d 23 in ch es or a ppr oxim a t ely 1.9 feet (.58
m et er s) for eigh t dr ives.
Beca u se of t h e en h a n cem en t s in t h e DE U , it s possible
t o ext en d beyon d t h e lim it s set for t h in t h e
specifica t ion . H owever , a sym pt om fr om exceedin g t h is
ca ble lim it is a SCSI bu s lock u p or “fr eeze.” If you
exper ien ce a sim ila r pr oblem a n d a r e a wa r e of a
ca blin g lim it issu e, r edu cin g t h e len gt h of ca blin g a n d
r et u r n in g t h e t ot a l len gt h t o wit h in t h e specified lim it
sh ou ld r esolve a n y pr oblem s.
If you h a ve a ca blin g issu e a n d r equ ir e m or e
in for m a t ion , con t a ct Tech n ica l Su ppor t for fu r t h er
a ssist a n ce. Da t a loss is possible u n d er con d it ion s of
S CS I bu s locku p.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
N o t e : Sh ielded da t a ca bles, su ch a s t h ose pr ovided
wit h t h e su bsyst em , m u st be u sed t o pr even t r a dio
fr equ en cy in t er fer en ce. It is r ecom m en ded t h a t you u se
t h e ca bles pr ovided wit h you r syst em . Th ese ca bles
h a ve been t est ed a n d m eet st r in gen t gu idelin es set
for t h by SCSI-3 AN SI specifica t ion s.
Ultra Wide SCSI Mode
Sever a l possible con figu r a t ion s exist for t h e DE U in
U lt r a Wide SCSI m ode. H owever t h is m a n u a l will
discu ss t h e t wo possible con figu r a t ion s u sin g t h e I/O
In t er fa ce ca r d in U lt r a Wide SCSI m ode: du a l-bu s
m odu le in a sin gle ca bin et a n d sin gle-bu s m odu le in a
sin gle ca bin et . Refer t o t h e Appen dix D wh en u sin g t h e
U lt r a E xt en der ca r d.
N o t e : Wh en con figu r in g a du a l-bu s ca bin et , bot h
ch a n n els of t h e H ost Con t r oller a r e con n ect ed t o ea ch
ba n k of dr ives t h r ou gh ea ch ch a n n el on t h e I/O
In t er fa ce ca r d. Wh en con figu r in g t h e sin gle-bu s
ca bin et , on e ch a n n el of t h e H ost Con t r oller con n ect s
bot h ba n k s of dr ives on ly t h r ou gh t h e r igh t or u pper
ch a n n el (Ch a n n el 1) on t h e I/O In t er fa ce ca r d.
Dual-Bus Cabinet
Th is con figu r a t ion pr ovides t wo sepa r a t e SCSI bu s
con n ect ion s t o t h e dr ives.
F r om t h e fr on t , t h e dr ives slot s a r e divided in t o t wo
ba n k s. Th e left or u pper fou r fr on t dr ive slot s, wh ich
a r e con n ect ed t o “Ch a n n el 1” on t h e I/O In t er fa ce ca r d,
a n d t h e r igh t or lower fou r fr on t dr ive slot s a r e
con n ect ed t o “Ch a n n el 0” on t h e I/O In t er fa ce ca r d.
Th e SCSI IDs of t h e dr ives a r e set by SAF -TE ca r d
defa u lt s t o IDs 0, 1, 2, a n d 4, fr om t h e fr on t begin n in g
wit h t h e dr ive loca t ed on t h e r igh t or lower slot of ea ch
ba n k . Th e SCSI IDs ca n be m a n u a lly ch a n ged fr om t h e
OCP , if r equ ir ed. Bot h ba n k s of dr ives will u se t h e
sa m e sequ en ce of SCSI ID n u m ber s wh en t h e Du a l-Bu s
m odu le is in st a lled.
N o t e : SCSI ID 3 is r eser ved for t h e SAF -TE ca r d
pr ocessor .
C a u t i o n : E n su r e t h a t t h e power swit ch is in t h e OF F
(O) posit ion for bot h t h e h ost syst em a n d t h e DE U
su bsyst em befor e con n ect in g a n y ca bles.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
1 Con n ect on e en d of a on e m et er da t a ca ble t o t h e
Ch a n n el #1 con n ect or on t h e U lt r a SCSI Con t r oller .
2 Con n ect t h e ot h er en d of t h e da t a ca ble t o t h e
Ch a n n el 0 SCSI con n ect or on t h e r igh t side or u pper
I/O In t er fa ce ca r d.
3 If r equ ir ed, con n ect on e en d of t h e secon d on e m et er
da t a ca ble t o t h e Ch a n n el #2 con n ect or on t h e U lt r a
SCSI Con t r oller .
4 Con n ect t h e ot h er en d of t h e secon d da t a ca ble t o t h e
Ch a n n el 1 SCSI con n ect or on t h e r igh t side or u pper
I/O In t er fa ce ca r d.
Single Dual-Bus Cabinet Configuration
TOP
Ch 0
Ch 1
I/O Interface
Card
I/O Interface
Card
Ch 1
Ch 2
Ultra SCSI
Controller
Ch 1
Ch 0
Host Computer
N o t e : SCSI t er m in a t ion in t h e DE U is a u t om a t ic a n d
r equ ir es n o u ser con figu r a t ion . Refer t o “Ca blin g
Con figu r a t ion ” descr ibed ea r lier for in for m a t ion on
syst em s u sin g DE C F a u lt bu s pr ot ocol.
5 Tu r n on t h e power t o t h e DE U . Aft er t h e power -on
self-t est h a s com plet ed, St a t u s a n d Ch a n n el Mode
LE Ds will be solid gr een .
6 Access t h e Opt ion s m en u on t h e Oper a t or Con t r ol
P a n el a n d ch oose t h e SAF TE CH AIN ID select ion .
Ch oose t h e “N on e” select ion , r efer t o “SAF TE CH AIN
ID” descr ibed la t er in t h is gu ide.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
7 Aft er set t in g t h e ca bin et iden t ifica t ion s you m u st
power cycle t h e su bsyst em . Obser ve n or m a l power
cyclin g pr eca u t ion s by wa it in g a m in im u m of five (5)
secon ds befor e a ddin g power a ga in .
Th is will r eset t h e SCSI IDs t o a defa u lt set t in g t h a t
pr even t s a SCSI ID con flict u n der n or m a l con dit ion s.
8 P ower u p you r com pu t er syst em a n d r u n t h e
con figu r a t ion pr ogr a m .
Th is com plet es t h e h a r dwa r e in st a lla t ion .
Single-Bus Cabinet
Th e Sin gle-Bu s m odu le lin k s a ll of t h e dr ives in t h e
DE U ca bin et t o a sin gle SCSI bu s. Th is con figu r a t ion
pr ovides t h e u ser wit h a ccess t o t h e dr ives
in depen den t ly or a s a sin gle la r ge a r r a y.
Th e SCSI IDs of t h e dr ives a r e set by SAF -TE ca r d
defa u lt s t o IDs 0 t h r ou gh 9, a n d a r e a ssign ed
sequ en t ia lly begin n in g wit h t h e lowest or fa r r igh t
dr ive.
N o t e : SCSI ID 3 is r eser ved for t h e SAF -TE ca r d
pr ocessor a n d ID 7 r eser ved for t h e RAID con t r oller .
C a u t i o n : E n su r e t h a t t h e power swit ch is in t h e OF F
(O) posit ion for bot h t h e h ost syst em a n d t h e DE U
su bsyst em befor e con n ect in g a n y ca bles.
1 Con n ect on e en d of a on e m et er da t a ca ble t o t h e
Ch a n n el #1 con n ect or on t h e H ost Con t r oller .
2 Con n ect t h e ot h er en d of t h e da t a ca ble t o t h e
Ch a n n el 1 SCSI con n ect or on t h e u pper or r igh t side
I/O In t er fa ce ca r d.
N o t e : Th e Ch a n n el 1 con n ect or loca t ed on t h e u pper or
r igh t side I/O In t er fa ce ca r d is t h e a ct ive con n ect or
wh en t h e Sin gle-Bu s m odu le is in st a lled.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Single-Bus Cabinet Configuration
TOP
Ch 1
Ch 0
I/O Interface
Card
I/O Interface
Card
Ultra SCSI
Controller
Ch 1
Ch 1
Host Computer
Ch 0
N o t e : SCSI t er m in a t ion in t h e DE U is a u t om a t ic a n d
r equ ir es n o u ser con figu r a t ion . Refer t o “Ca blin g
Con figu r a t ion ” descr ibed ea r lier for in for m a t ion on
syst em s u sin g DE C F a u lt bu s pr ot ocol.
3 Tu r n on t h e power t o t h e DE U . Aft er t h e power -on
self-t est h a s com plet ed, St a t u s a n d Ch a n n el Mode
LE Ds will be solid gr een .
4 Access t h e Opt ion s m en u on t h e Oper a t or Con t r ol
P a n el a n d ch oose t h e SAF TE CH AIN ID select ion .
Ch oose t h e “N on e” select ion , r efer t o “SAF TE CH AIN
ID” descr ibed la t er in t h is gu ide.
5 Aft er set t in g t h e ca bin et iden t ifica t ion s you m u st
power cycle t h e su bsyst em . Obser ve n or m a l power
cyclin g pr eca u t ion s by wa it in g a m in im u m of five (5)
secon ds befor e a ddin g power a ga in .
Th is will r eset t h e SCSI IDs t o a defa u lt set t in g t h a t
pr even t s a SCSI ID con flict u n der n or m a l con dit ion s.
6 P ower u p you r com pu t er syst em a n d r u n t h e
con figu r a t ion pr ogr a m .
Th is com plet es t h e h a r dwa r e in st a lla t ion .
N o t e : F or a ddit ion a l con figu r a t ion opt ion s u sin g U lt r a
Wide SCSI, r efer t o Appen dix D.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Other Configurations
Th er e a r e m a n y possible com bin a t ion s of con t r oller s
a n d ca blin g sch em es wh en con figu r in g t h e DE U
su bsyst em s. Th e sa m ple con figu r a t ion s in t h e pr eviou s
sect ion s pr ovide t h e ba sic con figu r a t ion s. H owever , t h e
DE U is ba sed on a n open -a r ch it ect u r e expa n da ble
su bsyst em a n d a llows for cu st om iza t ion t o fit you r
cu r r en t or fu t u r e n eeds.
N o t e : F or a ddit ion a l con figu r a t ion opt ion s wh ile
oper a t in g u n der t h e U lt r a Wide SCSI m ode, r efer t o
Appen dix D.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
3 Using the DEU
Power-On Self Diagnostics
Wh en t h e DE U is power ed on , it will per for m a power
on self-t est (P OST) pr ocedu r e. If n o er r or s a r e det ect ed,
a ll of t h e St a t u s In dica t or LE Ds will illu m in a t e solid
gr een .
Du r in g t h e dia gn ost ic self-t est a con t in u ou s t on e will
sou n d a n d t h e followin g will be obser ved:
Th e Oper a t or Con t r ol P a n el will displa y “Test in g
ROM”, “N VRAM”, a n d “SCSI Access” followed by t h e
st a r t u p m ode scr een a n d t h e St a t u s OK (defa u lt )
scr een , pr ovided n o er r or s a r e det ect ed. Th e St a t u s
In dica t or LE Ds will be a s follows:
F a n St a t u s LE D will be solid a m ber a n d ch a n ge
t o solid gr een
P ower Su pply LE D will be solid gr een
Ch a n n el Mode LE D will be solid a m ber a n d
ch a n ge t o solid gr een
In a ddit ion t o t h e LE D in dica t ion s, t h e P OST pr ocedu r e
ca n be m on it or ed fr om t h e Oper a t or Con t r ol P a n el.
Th e r esu lt s of t h e t est ca n be viewed fr om t h e Oper a t or
Con t r ol P a n el by select in g “H a r dwa r e Men u ” a t t h e
Ma in Men u a n d t h en ch oosin g “P OST Resu lt s”, see
Oper a t or Con t r ol P a n el descr ibed la t er in t h is gu ide.
RAM Read/Write, ROM Checksum, and Register Read/Write
Failures
N o t e : N on e of t h e followin g er r or con dit ion s will
com pr om ise t h e da t a in t egr it y on t h e DE U dr ives.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
An y of t h ese fa ilu r es will gen er a t e t h e followin g:
Ch a n n el Mode LE D will blin k a m ber eigh t t im es a n d
t h e spea k er will sou n d eigh t t on es. Th e Ch a n n el Mode
LE D will ch a n ge t o gr een a n d n or m a l oper a t ion s will be
a t t em pt ed a ft er t h e t on es a r e sou n ded. Th ese fa ilu r es
in dica t e t h a t t h e LE Ds a n d a u dible a la r m fu n ct ion s
m a y n ot be r elia ble.
RAM Rea d/Wr it e F a ilu r e - Th is in dica t es t h a t on e or
m or e byt es of t h e m icr opr ocessor RAM fa iled a
wr it e/r ea d t est .
ROM Ch eck su m F a ilu r e - Th is in dica t es t h a t t h e
m icr opr ocessor ROM fa iled t o gen er a t e t h e pr oper
ch eck su m .
Regist er Rea d/Wr it e F a ilu r e - Th is in dica t es t h a t on e
or m or e of t h e m icr opr ocessor ’s r egist er s h a ve
becom e defect ive.
If t h e er r or s occu r con sist en t ly, t h e DE U n eeds t o be
ser viced. Con t a ct you r ser vice pr ovider .
RAM Checksum Failure
Th e Ch a n n el Mode LE D will a lt er n a t ely blin k gr een
a n d a m ber in defin it ely. Th is in dica t es t h a t t h e
fir m wa r e st or ed in t h e n on -vola t ile RAM h a s becom e
cor r u pt ed a n d n ew fir m wa r e da t a will n eed t o be
down loa ded fr om t h e SCSI bu s t o cor r ect t h is pr oblem .
Con t a ct Tech n ica l Su ppor t .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
SCSI Bus Access Failure
Th e Ch a n n el Mode LE D will blin k a m ber fou r t im es
a n d t h e spea k er will sou n d fou r t on es. Th is in dica t es
t h a t eit h er t h e SCSI con t r oller fa iled t o r espon d t o a
r eset com m a n d or a n ot h er device h a s con t r ol of t h e
SCSI bu s.
N ot e t h a t t h is m a y be ca u sed by ot h er devices h a vin g
con t r ol of t h e bu s a t t h e t im e t h e DE U is power ed ON .
Aft er t h e t on es h a ve sou n ded, t h er e will be a t wo
secon d dela y, a n d t h e m icr opr ocessor will a ga in
a t t em pt t o in it ia lize t h e SCSI con t r oller . Tu r n in g t h e
syst em OF F t h en ON a ga in m a y h elp r esolve t h is
con dit ion . N or m a l oper a t ion s will be im possible wh ile
t h e SCSI con t r oller r em a in s u n r espon sive.
All dr ive LE Ds will be solid gr een r ega r dless of t h e
er r or con dit ion s. Th e DE U n eeds t o be ser viced if t h is
er r or occu r s con sist en t ly a n d is n ot clea r ed by cyclin g
t h e power on t h e DE U . Con t a ct Tech n ica l Su ppor t .
N o t e : Th e DE U will n ot r espon d t o t h e soft wa r e if t h is
er r or occu r s.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
LED Descriptions
Use the following LED description matrix to determine the status of
the DEU LEDs when the SAF-TE card is installed and the RAID
controller is powered on.
SAF-TE LED Matrix
STATUS LEDs
CHANNEL MODE LEDs
AT POWER UP
Steady Green
Steady Green
DRIVE READY
NOT ASSIGNED
Blinking Green
Steady Green
Blinking Green
Blinking Green
Steady Green
Steady Green
Steady Green
Steady Amber
DRIVE READY
ASSIGNED
HOT SPARE READY
ASSIGNED
DRIVE ERROR
NOT ASSIGNED
DRIVE ERROR
ASSIGNED
Blinking Amber
Steady Amber
Steady Amber
Steady Amber
Steady Amber
Steady Amber
ARRAY CRITICAL
REMAINING GOOD DRIVES
HOT SPARE
REBUILD MODE
DRIVE MANUALLY
DISABLED
Blinking Amber
Steady Amber
STATUS LEDs
ASSIGNED TO ARRAY
Steady Green
UNASSIGNED DRIVE
HOT SPARE
Blinking Green
Blinking Green
Off
Blinking Amber
Steady Amber (all drives)
ALL EMPTY BAYS
FAILED DRIVE
REBUILD MODE
CHANNEL MODE LEDs
ARRAY IS FAULT-TOLERANT
ARRAY IS IN REBUILD MODE
Steady Green
Steady Amber
ARRAY HAS A FAILED DRIVE
Steady Amber
FIRMWARE CHECKSUM ERROR
Alternating Amber and Green
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Operator Control Panel
Th e Oper a t or Con t r ol P a n el is u sed t o con t r ol a n d
m on it or t h e power su pplies a n d fa n s. Th e u ser ca n a lso
ch a n ge SCSI IDs for t h e dr ives a n d SAF -TE pr ocessor ,
m on it or t h e ca bin et t em per a t u r e or ch a n ge t h e
t em per a t u r e t h r esh old for t h e m on it or in g syst em .
Ot h er m en u fu n ct ion s pr ovide for viewin g com pon en t
syst em st a t u s, silen cin g t h e a la r m , est a blish in g a
pa sscode t o pr ot ect SCSI ID opt ion s, a n d r ea din g t h e
fir m wa r e.
Appears When
More Options are
Available Above
Menu
Selector
TURN OFF ALARM
Appears When
HARDWARE MENU
More Options are
OPTIONS MENU
Available Below
Moves Menu
Selector Up
Animated
Icon
MENU
ENTER ESCAPE
firmware by lyle
Moves Menu
Selector Down
Selects Menus Option or
Returns to Main Menu
Backs Up One Level
or Cancels Action
Selects the Option
Indicated by Selector
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Startup Screens
Th e followin g a r e sa m ple scr een s t h a t cou ld occu r
du r in g t h e st a r t u p P OST oper a t ion for n or m a l
con dit ion s a n d a bn or m a l con dit ion s:
STARTING DUAL-BUS
CONFIGURATION
STATUS : OK
MENU ENTER ESCAPE
Startup Screen
MENU ENTER ESCAPE
Status OK Screen
Normal Screens
STATUS : HARDWARE
STATUS : HEAT
THRESHOLD EXCEEDED
¸
ERROR
MENU ENTER ESCAPE
MENU ENTER ESCAPE
Temperature Exceeeded Screen
Hardware Error Screen
Abnormal Screens
If on e of t h e er r or s occu r du r in g t h e st a r t u p, you will
h a ve a con t in u ou s t on e fr om t h e a la r m a n d will n eed t o
a ccess t h e Com pon en t St a t u s Men u t o ver ify t h e
su spect ed fa iled com pon en t .
Du r in g n or m a l oper a t ion , a n yt im e on e of t h e r equ ir ed
n u m ber of power su pplies becom es in oper a t ive, you will
r eceive a con t in u ou s a la r m a n d a wa r n in g m essa ge will
a ppea r . Th is m essa ge is sim ply a n ot ifica t ion t h a t t h e
st a t e of t h e power su pply syst em is n o lon ger
r edu n da n t . U se t h e Com pon en t St a t u s m en u t o
det er m in e wh ich power su pply h a s fa iled a n d iden t ify
t h e fa iled u n it by a bsen ce of a “DC Good” LE D on t h e
P SU . Repla ce t h e fa iled com pon en t r et u r n in g t h e
syst em t o a r edu n da n t st a t e.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
If you in st a ll five (5) or m or e dr ives wit h on ly t wo (2)
power su pplies in st a lled, a n a la r m will sou n d, t h e
P ower Su pply LE D will illu m in a t e st ea dy a m ber , a n d
t h e OCP displa y will in dica t e “N on -Redu n da n t P ower .”
In st a ll a t h ir d power su pply a n d t h e displa y will clea r
followed by t h e P ower Su pply LE D will r et u r n t o st ea dy
gr een .
System Status Icon
A fea t u r e of t h e DE U OCP is t h e “a t -a -gla n ce” a n im a t ed
icon t h a t a ppea r s in dica t in g su bsyst em st a t u s. Th e icon
t h a t a ppea r s a ppr oxim a t ely 30 secon ds a ft er a st a t ic
displa y in t h e loca t ion wh er e t h e cu r sor wou ld
n or m a lly be loca t ed.
Th e a n im a t ed icon will h a ve a “h a ppy” fa ce a n d look s
“left a n d r igh t ”, if a ll t h e syst em s a r e oper a t in g
n or m a lly. If a n a bn or m a lit y occu r s wit h in t h e
su bsyst em , t h e icon will ch a n ge t o a “sa d” fa ce
r equ est in g you r a t t en t ion .
Happy Icon
(system nominal)
Sad Icon
(system nominal)
Main Menu
F r om t h e Ma in Men u you ca n select fr om t h e followin g
opt ion s:
■
■
■
Tu r n off t h e a u dible a la r m
Ch oose t h e h a r dwa r e m en u
Ch oose t h e opt ion s m en u
To a ccess t h e Ma in m en u , pr ess t h e <Men u > bu t t on .
U se t h e u p a n d down a r r ow bu t t on s t o m a k e you r
select ion a n d pr ess t h e <E n t er > bu t t on .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
TURN OFF ALARM
HARDWARE MENU
OPTIONS MENU
MENU
ENTER ESCAPE
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Hardware Menu
F r om t h e H a r dwa r e Men u you ca n ch oose fr om t h e
followin g opt ion s:
■
■
■
■
Com pon en t St a t u s
Con figu r a t ion In fo
P OST Resu lt s (P ower -On Self Test )
In t er n a l Tem p
TURN OFF ALARM
HARDWARE MENU
OPTIONS MENU
MENU
ENTER ESCAPE
COMPONENT STATUS
CONFIGURATION INFO
POST RESULTS
INTERNAL TEMP
MENU
ENTER ESCAPE
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Component Status
Th e Com pon en t St a t u s Men u pr ovides a list of t h e
power su pplies a n d fa n s in st a lled in t h e DE U a n d t h eir
cu r r en t st a t u s. Com pon en t st a t u s is eit h er OK,
Missin g, or F a iled. If you r eceive a H a r dwa r e E r r or ,
a ccess t h e Ma in m en u a n d ch oose H a r dwa r e m en u ,
t h en select “Com pon en t St a t u s.”
U se t h e u p/down a r r ow bu t t on s t o view t h e com plet e
list of t h e com pon en t s.
COMPONENT STATUS
CONFIGURATION INFO
POST RESULTS
INTERNAL TEMP
MENU ENTER ESCAPE
PWR SPLY 1...OK
PWR SPLY 2...OK
PWR SPLY 3...MISSING
FAN 1...........FAILED
MENU ENTER ESCAPE
FAN 2...........OK
FAN 1 SPEED..79%
FAN 2 SPEED..79%
BUS CONFIG...SINGLE/DUAL
MENU ENTER ESCAPE
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Configuration Info
Th is select ion pr ovides in for m a t ion a bou t t h e
su bsyst em ’s con figu r a t ion in clu din g su ch it em s a s t h e
in st a lled fea t u r e ca r ds (I/O In t er fa ce, 1-CH Diff
Con ver t er , 2-CH Diff Con ver t er , 1-CH U lt r a E xt en der ,
2-CH U lt r a E xt en der , S2S In t er fa ce [SCSI-t o-SCSI
in t er fa ce]), a n d fir m wa r e in for m a t ion . Slot 1 is t h e
lower / left fea t u r e ca r d slot a n d slot 2 is t h e
u pper /r igh t fea t u r e ca r d slot .
COMPONENT STATUS
POWER STATUS
CONFIGURATION INFO
POST RESULTS
PROD: xxxxx
SAF-TE
SLOT 1 CARD:
I/O INTERFACE
SLOT 2 CARD:
MENU
ENTER ESCAPE
MENU
ENTER ESCAPE
SLOT 1 CARD:
1-CH DIFF CONVERTER
SLOT 2 CARD:
2-CH ULTRA EXTENDER
MENU
ENTER ESCAPE
I/O INTERFACE
RAM REVISION: 0.21
ROM REVISION: 1.05
ID: FFFFFFFFh
MENU
ENTER ESCAPE
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
POST Results
Th is scr een pr ovides a list of t h e dia gn ost ics per for m ed
du r in g t h e st a r t u p power -on self-t est . If a n er r or h a s
occu r r ed it will be displa yed h er e in a ddit ion t o t h e
sequ en ce of LE D blin k s a n d a la r m t on es, see P ower -On
S elf Dia gn ost ics descr ibed ea r lier .
COMPONENT STATUS
POWER STATUS
FW REVISION
POST RESULTS
ROM CHKSUM...OK
RAM CHKSUM...FAILED
RAM R/W.........OK
SCSI BUS 0......OK.
MENU
ENTER
ESCAPE
MENU
ENTER
ESCAPE
RAM R/W. ......OK
SCSI BUS 0 ....OK
SCSI BUS 1 ....OK
PROCESSOR.....OK
MENU
ENTER
ESCAPE
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Internal Temp
Th is scr een displa ys t h e cu r r en t in t er n a l ca bin et
t em per a t u r e (h igh est of t h e t wo sen sor s). To ch a n ge t h e
t em per a t u r e t h r esh old of t h e m on it or in g syst em , see
H ea t T h r esh old descr ibed la t er in t h is gu ide.
POWER STATUS
CONFIGURATION INFO
POST RESULTS
INTERNAL TEMP
CABINET INTERNAL
TEMPERATURE
75 F
/
24 C
MENU
ENTER ESCAPE
MENU
ENTER ESCAPE
Options Menu
Th e Opt ion s Men u pr ovides a ccess t o t h e followin g
m en u s:
■
■
■
■
■
SCSI ID Men u
H ea t Th r esh old
SAF TE Ch a in ID
Ch a n ge P a sscode
U n lock Opt ion s
SCSI ID Menu
F r om t h e SCSI ID Men u you ca n set SCSI IDs for
dr ives a t t a ch ed t o ea ch of t h e SCSI ch a n n els (lower slot
a n d u pper slot ), set t h e DE U (SAF -TE ) pr ocessor ID,
set t h e SCSI ID of t h e U lt r a S2S RAID Con t r oller
(RAID Modu le). SCSI IDs 0 - 15 a r e a va ila ble.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
SCSI ID MENU
HEAT THRESHOLD
SAFTE CHAIN ID
CHANGE PASSCODE
SET LOWER SLOT IDS
SET UPPER SLOT IDS
SET RAID MODULE ID
SET SAFTE ID
MENU
ENTER ESCAPE
MENU
ENTER ESCAPE
Manual ID Selection
You ca n set SCSI IDs m a n u a lly for ea ch gr ou p of
devices fr om a pr e-defin ed t a ble of IDs. Th e cu r r en t ly
set IDs will be fla sh in g. Th e IDs will be a ssign ed
sequ en t ia lly begin n in g wit h t h e lowest device in t h e
gr ou p. Dr ive SCSI IDs ca n n ot be set in dividu a lly.
Ch oose “Set Lower Slot Ids” or “Set U pper Slot Ids” for
t h e a ppr opr ia t e dr ives a n d pr ess t h e E n t er bu t t on .
N o t e : SCSI ID #7 sh ou ld n ot be u sed wh en a U lt r a S2S
RAID Con t r oller is in st a lled.
Wh en select in g IDs m a n u a lly, SCSI ID 3 is n or m a lly
u sed by t h e DE U pr ocessor . Th e SAF TE ca r d ID m a y
u se t h e set t in g “OB” wh ich in dica t es Off Bu s. H owever ,
if SAF TE is off bu s, LE Ds a n d ot h er er r or r epor t in g
will n ot fu n ct ion pr oper ly.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
SET LOWER SLOT IDS
SET UPPER SLOT IDS
SET RAID MODULE ID
SET SAFTE ID
0
0
4
4
5
1
1
5
5
6
2
2
6
6
7
3
4
7
8
8
LOWER 4
MENU
ENTER ESCAPE
MENU
ENTER ESCAPE
Reset Default IDs Selection
Ch oosin g t h e “Reset Defa u lt Ids” opt ion will
a u t om a t ica lly set t h e SCSI IDs t o IDs 0, 1, 2, a n d 4 for
t h e dr ives, a n d ID 3 for t h e pr ocessor . SCSI ID va lu es
for t h e dr ives will be t h e sa m e for bot h SCSI bu s
ch a n n els.
If a n U lt r a S2S RAID Con t r oller is in st a lled t h e SCSI
ID will a u t om a t ica lly be set t o ID # 0.
SET UPPER SLOT IDS
SET RAID MODULE ID
SET SAFTE ID
RESET DEFAULT IDS
ALL SCSI IDS SET
TO DUAL-BUS MODE
(CYCLE POWER TO
EFFECT CHANGES)
MENU
ENTER ESCAPE
MENU
ENTER ESCAPE
N o t e : Wh en t h e “Reset Defa u lt Ids” is select ed or
a n yt im e you ch a n ge a SCSI ID set t in g, you m u st power
t h e DE U OF F a n d ON a t t h a t scr een for t h ose set t in gs
t o t a k e effect . Be su r e t o power OF F t h e h ost com pu t er
pr ior t o cyclin g t h e power on t h e DE U . Ot h er wise, t h e
P CI RAID Con t r oller (if u sed) will “k ill” a ll dr ives in
t h e a r r a y.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Heat Threshold
N o t e : Th e H ea t Th r esh old va lu e is pr e-set a t t h e
fa ct or y a n d sh ou ld n ot be ch a n ged u n less dir ect ed by
Tech n ica l Su ppor t . Th e defa u lt set t in g is 114°F /45°C.
Ch oose t h e H ea t Th r esh old Men u t o ch a n ge t h e
t em per a t u r e va lu e for t h e t em per a t u r e m on it or in g
syst em . If t h e t em per a t u r e exceeds t h e va lu e set h er e,
a “Tem per a t u r e Th r esh old E xceeded” scr een will
a ppea r , see In t er n a l T em p descr ibed ea r lier .
SCSI ID MENU
HEAT THRESHOLD
SAFTE CHAIN ID
CHANGE PASSCODE
MENU
ENTER ESCAPE
ARROWS TO CHANGE
ENTER TO SET
ESC TO EXIT
114 F / 45 C
MENU
ENTER ESCAPE
SAFTE CHAIN ID
Th is opt ion a llows t h e a dm in ist r a t or t o est a blish t h e
in t er ca bin et SAF -TE com m u n ica t ion t o su ppor t a
m a st er a n d sla ve ca bin et s. Th e m a st er ca bin et ca n
r epor t com pon en t fa ilu r e for bot h t h e m a st er ca bin et
a n d u p t o t wo sla ve ca bin et s t o t h e RAID m a n a gem en t
soft wa r e. E a ch ca bin et ’s in dividu a l OCP will fu n ct ion
n or m a lly for t h a t ca bin et ’s com pon en t s.
On ce t h e sla ve ca bin et s h a ve been est a blish ed, t h e
a dm in ist r a t or m u st u se t h e sla ve ca bin et ’s OCP t o
m a n u a lly t a k e t h a t sla ve ca bin et SAF -TE ca r d off bu s,
r efer t o “Ma n u a l ID Select ion ” descr ibed ea r lier .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
1. Ch oose t h e S AF T E CH AIN ID select ion a n d pr ess
t h e <E n t er > bu t t on .
2. U se t h e u p a n d down a r r ow bu t t on s t o ch oose
bet ween t h e opt ion s: n on e, m a st er , sla ve 1, a n d
sla ve 2 a n d pr ess t h e <E n t er > bu t t on .
N o t e : Ch oose N ON E wh en t h e ca bin et is u sed in a
st a n d-a lon e con figu r a t ion or t h e m a st er /sla ve opt ion is
n ot desir ed.
3. You will be pr om pt ed t o cycle t h e power on t h e DE U
for t h e ch a n ges t o t a k e effect .
HEAT THRESHOLD
SAFTE CHAIN ID
CHANGE PASSCODE
UNLOCK OPTIONS
MENU
ENTER ESCAPE
NONE
MASTER
SLAVE 1
SLAVE 2
MENU
ENTER ESCAPE
Change Passcode
Th is opt ion a llows t h e a dm in ist r a t or t o cr ea t e or
ch a n ge a pa sscode t h a t will pr ot ect a ccess t o a ll t h e
it em s u n der t h e select ion s SCSI ID Men u , H ea t
Th r esh old, a n d Ch a n ge P a sscode.
1 U se t h e a r r ow bu t t on s t o ch a n ge t h e code va lu e (0-9)
a n d t h e en t er bu t t on t o m ove fr om on e field t o t h e
n ext .
2 P r ess t h e en t er bu t t on a ft er you h a ve m a de you r
select ion s.
3 You will be pr om pt ed t o pr ess t h e esca pe bu t t on
a ft er t h e pa sscode is ch a n ged for t h e ch a n ge t o t a k e
a ffect . Th e defa u lt code is “0000.”
N o t e : Th e lock will n ot t a k e effect u n t il you h a ve
r et u r n ed t o t h e m a in scr een “St a t u s OK.”
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
HEAT THRESHOLD
SAFTE CHAIN ID
CHANGE PASSCODE
UNLOCK OPTIONS
ENTER NEW PASSCODE
0 0 0 0
MENU
ENTER ESCAPE
MENU
ENTER ESCAPE
PASSCODE CHANGED
(ESCAPE TO CONTINUE)
MENU
ENTER ESCAPE
Unlock Options
Th is opt ion a llows t h e a dm in ist r a t or t o u n lock t h e
it em s fou n d u n der t h e SCSI ID Men u , H ea t Th r esh old,
a n d Ch a n ge P a sscode select ion s. Th is en a bles t h e u ser
t o ch a n ge t h ese va lu es a n d pr ot ect s t h ese va lu es fr om
bein g ch a n ged by t h ose n ot a u t h or ized t o do so.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
HEAT THRESHOLD
SAFTE CHAIN ID
CHANGE PASSCODE
UNLOCK OPTIONS
MENU
ENTER ESCAPE
ENTER 4 DIGIT
PASSCODE
0000
MENU
ENTER ESCAPE
1 Select t h e “U n lock Opt ion s” fr om t h e Opt ion s m en u .
2 U se t h e a r r ow bu t t on s t o ch a n ge t h e code va lu e (0-9)
a n d t h e E n t er bu t t on t o m ove fr om on e field t o t h e
n ext .
3 P r ess t h e E n t er bu t t on a ft er you h a ve m a de you r
select ion s.
You will be pr om pt ed t h a t t h e SCSI ID Men u opt ion s
a r e u n lock ed u n t il you h a ve cycled t h e m en u s ba ck t o
t h e defa u lt “St a t u s OK” scr een . An “u n lock ” icon will
a ppea r in pla ce of t h e cu r sor wh ile t h e opt ion s r em a in
u n lock ed.
OPTIONS WILL REMAIN
UNLOCKED UNTIL YOU
RETURN TO THE
DEFAULT SCREEN
MENU
ENTER
ESCAPE
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
4 Maintenance
Replacing a Disk Drive
C a u t i o n : Dr ives a n d pr in t ed cir cu it boa r d com pon en t s
a r e sen sit ive t o elect r ost a t ic disch a r ge. To pr even t
oper a t in g fa ilu r e or da m a ge, obser ve t h e followin g:
E st a blish a gr ou n d for you r self by u sin g t h e wr ist
gr ou n din g st r a p, or by t ou ch in g t h e m et a l ch a ssis pr ior
t o h a n dlin g or in st a llin g t h e dr ives or pr in t ed cir cu it
boa r d com pon en t s.
N o t e : Th er e is n o n eed t o power OF F t h e DE U or t h e
com pu t er syst em . Th e dr ives a r e h ot swa ppa ble.
1 U n lock a n d open t h e door on t h e DE U ca bin et .
2 Iden t ify t h e fa iled dr ive u sin g t h e St a t u s LE Ds a n d
t h e F a u lt LE D.
3 U sin g you r t h u m bs, a pply a sligh t pr essu r e ou t wa r d
t o r elea se t h e dr ive la t ch clips, u n lock in g t h e fa iled
dr ive a n d r em ove t h e dr ive.
4 Rem ove you r n ew disk dr ive fr om t h e sh ippin g
ca r t on a n d in spect t h e sh ipm en t . Rem ove t h e a n t i-
st a t ic pr ot ect ive pa ck a gin g.
5 H oldin g t h e dr ive by it s edges, loca t e t h e Dr ive
La t ch in g Clips a n d pu ll ou t on t h e la t ch es t o u n lock
t h em . Th e Dr ive La t ch in g Clips a r e pla ced in t h e
lock ed posit ion for sh ippin g pu r poses.
6 In ser t t h e dr ive in t o t h e dr ive ba y by a lign in g it s
r a ils in t o t h e dr ive ba y slot s, com pon en t side t owa r d
t h e r igh t (r a ck ) or down (t ower ). Sea t t h e dr ive by
a pplyin g ligh t pr essu r e wit h you r t h u m b t o t h e fr on t
of t h e dr ive.
7 P r ess t h e Dr ive La t ch in g Clips u n t il t h ey “sn a p” in t o
pla ce.
Replacing a Power Supply
N o t e : Th er e is n o n eed t o power off t h e DE U or t h e
com pu t er syst em . Th e power su pplies a r e h ot
swa ppa ble.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
1 U se t h e Oper a t or Con t r ol P a n el t o iden t ify t h e fa iled
power su pply, r efer t o t h e illu st r a t ion below t o
iden t ify t h e com pon en t s.
Select “H a r dwa r e Men u ” fr om t h e Ma in Men u a n d
ch oose “Com pon en t St a t u s.”
Power Supply #3
Power Supply #2
“DC Good” LED
Power Supply #1
2 Loca t e t h e fa iled com pon en t fr om t h e r ea r pa n el of
t h e DE U . Th e “DC Good” LE D for t h e fa iled power
su pply will be OF F .
3 Loosen t h e r ea r door pa n el a ccess scr ew, u sin g a
fla t -bla de scr ewdr iver .
If you a r e r epla cin g t h e #3 power su pply, loosen t h e
t wo P SU Cover P la t e scr ews. Rem ove t h e cover pla t e
a n d sk ip t o st ep 4.
4 Open t h e pa n el t o ga in a ccess t o power su pplies #1
a n d #2. Th e pa n el is h in ged.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
5 Gr a sp t h e h a n dle of t h e su bject power su pply a n d
pu ll t h e su pply ou t of t h e DE U ca bin et .
6 Rem ove t h e n ew power su pply fr om t h e sh ippin g
ca r t on a n d in spect t h e sh ipm en t . Sa ve t h e pa ck a gin g
m a t er ia l.
7 Slide t h e n ew power su pply in t o t h e ca bin et u n t il it
r ea ch es it s lock ed posit ion . Or ien t t h e su pply in t h e
sa m e m a n n er a s t h e r em oved power su pply. (Air
slot s in t h e P SU ca se fa ce t owa r d t h e cen t er of t h e
ca bin et .)
Th e n ew power su pply’s LE D sh ou ld illu m in a t e.
8 Close t h e r ea r door pa n el. Th e door h a s a la t ch
m ech a n ism t o h old t h e door in t h e open posit ion .
Squ eeze t h e la t ch t o r elea se t h e door a llowin g it t o
be closed.
If you a r e r epla cin g t h e #3 power su pply, r e-in st a ll
t h e P SU Cover P la t e a n d t h en r e-secu r e t h e power
cor d r et a in er .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Replacing the Cooling Fans
N o t e : Th er e is n o n eed t o power off t h e DE U or t h e
com pu t er syst em . Th e coolin g fa n s a r e h ot swa ppa ble.
1 U se t h e Oper a t or Con t r ol P a n el t o iden t ify t h e fa iled
fa n , r efer t o t h e illu st r a t ion below t o iden t ify t h e
com pon en t s.
Fan #2
Power Cable
Fan #2
Fan #1
Power Cable
Fan #1
Door Latch
Fan #1
Power Cable
Select “H a r dwa r e Men u ” fr om t h e Ma in Men u a n d
ch oose “Com pon en t St a t u s.” You m a y n eed t o scr oll
t h r ou gh t h e list wit h t h e a r r ows bu t t on s t o loca t e
t h e fa iled com pon en t .
2 Loosen t h e r ea r door pa n el a ccess scr ew, u sin g a
fla t -bla de scr ewdr iver .
3 Open t h e pa n el t o ga in a ccess t o t h e fa n s. Th e pa n el
is h in ged.
4 Discon n ect t h e fa n ’s power ca ble con n ect or .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
5 Rem ove t h e fa iled fa n by slidin g it ou t fr om t h e door
a ssem bly.
6 Rem ove t h e n ew coolin g fa n fr om t h e sh ippin g ca r t on
a n d in spect t h e sh ipm en t . Sa ve t h e pa ck a gin g
m a t er ia l.
7 Wit h t h e fa n gu a r d fa cin g t owa r d t h e in side of t h e
ca bin et , slide t h e n ew fa n in t o it s h ou sin g.
8 Recon n ect t h e fa n ’s power ca ble con n ect or . Th e
con n ect or is k eyed a n d will in st a ll on ly on e
dir ect ion .
9 Close t h e r ea r door pa n el. Th e door h a s a la t ch
m ech a n ism t o h old t h e door in t h e open posit ion .
Squ eeze t h e la t ch t o r elea se t h e door a llowin g it t o
be closed.
10 Secu r e t h e door wit h t h e a ccess pa n el scr ew.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Replacing the DEU Cabinet
C a u t i o n : Dr ives a n d pr in t ed cir cu it boa r d com pon en t s
a r e sen sit ive t o elect r ost a t ic disch a r ge. To pr even t
oper a t in g fa ilu r e or da m a ge, obser ve t h e followin g:
E st a blish a gr ou n d for you r self by u sin g t h e wr ist
gr ou n din g st r a p, or by t ou ch in g t h e m et a l ch a ssis pr ior
t o h a n dlin g or in st a llin g t h e dr ives or pr in t ed cir cu it
boa r d com pon en t s.
1 Rem ove you r n ew ca bin et fr om t h e sh ippin g ca r t on
a n d in spect t h e sh ipm en t . Sa ve t h e pa ck a gin g
m a t er ia l.
2 Down you r ser ver a n d t u r n off t h e com pu t er syst em .
Tu r n t h e power off t o t h e old DE U ca bin et .
N o t e : N ot e t h e posit ion of t h e da t a ca bles, disk dr ives,
a n d t h e ju m per s on t er m in a t ion in t er fa ce ca r ds pr ior t o
discon n ect in g or r em ovin g t h e it em s. To fa cilit a t e
cor r ect in st a lla t ion , you m a y wa n t t o t a g t h e ca bles
a ppr opr ia t ely. Th e dr ives sh ou ld h a ve a dr ive la bel
loca t ed on t h e fr on t of ea ch dr ive u n it .
3 Rem ove ea ch dr ive n ot in g it s posit ion a n d st or e t h em
in a sa fe loca t ion .
4 Discon n ect t h e da t a a n d power ca bles fr om t h e old
su bsyst em .
5 (Ra ck Mou n t Syst em s On ly) Rem ove t h e DE U fr om
t h e r a ck a ssem bly.
6 (Sin gle-Bu s Modu les On ly) Rem ove t h e Sin gle-Bu s
con figu r a t ion m odu le fr om t h e old ca bin et a n d
in st a ll it in t o t h e n ew ca bin et .
7 (Ra ck Mou n t Syst em s On ly) In st a ll t h e n ew DE U
ca bin et in t o t h e r a ck a ssem bly.
8 If you h a ve a t h ir d power su pply u n it in st a lled in
t h e old ca bin et , r em ove it a n d in st a ll t h e P SU in t o
t h e n ew ca bin et .
9 Recon n ect a n d secu r e t h e power cor d a n d da t a
ca bles.
10 In st a ll t h e dr ives in t o t h e n ew ca bin et in exa ct ly t h e
sa m e or der a s t h ey wer e in t h e old ca bin et .
11 P ower ON t h e n ew DE U su bsyst em .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
12 P ower ON t h e com pu t er syst em or ser ver .
Replacing a Fuse
C a u t i o n : Discon n ect power befor e ch a n gin g t h e fu se.
1 Loca t e t h e fu se h older on t h e r ea r pa n el of t h e DE U .
Fuse Assembly
Power Connector Module
Fuse (250V 10A)
Fuse Holder
2 U sin g a sm a ll coin , t u r n t h e fu se h older cou n t er -
clock wise on e qu a r t er t u r n , r elea sin g t h e h older
fr om it s lock ed posit ion .
3 U sin g t h e t ip of you r fin ger n a il, ea se t h e h older
a wa y fr om t h e u n it .
4 On ce r em oved, sepa r a t e t h e fu se fr om t h e h older .
5 Repla ce t h e fu se wit h on e of iden t ica l t ype a n d
r a t in g (250V 10A).
6 In ser t t h e fu se in t o t h e h older .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
7 In ser t t h e fu se h older in t o t h e u n it a n d secu r e it .
P u sh in wh ile t u r n in g clock wise on e qu a r t er t u r n ,
lock in g it in t o pla ce. Do n ot over t igh t en .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
5 Troubleshooting
Th is ch a pt er pr ovides solu t ion s for som e of t h e
pr oblem s you m a y en cou n t er wh ile u sin g t h e DE U .
Symptom
Reason
Solution
Fails to power on.
Power cord not connected properly. Verify that the power cord is properly
connected to the power module.
Power not available at the outlet.
If the DEU is plugged into a three-hole
grounded outlet, verify if power to the
outlet has been interrupted. This can be
accomplished by testing the outlet with a
known working appliance, like a lamp.
Power switch not in the proper
position.
Be sure that the power switch is in the
“ON” position, labeled “I”.
Faulty fuse.
Replace fuse, see Replacing a Fuse
described earlier in this guide.
Faulty power cord.
Replace power cord.
If the DEU is not responding,
contact your service provider.
Operator Control Panel Possible component failure.
display indicates
“Hardware Error.”
From the Operator Control Panel,
“Hardware Menu” from the Main Menu
and select “Component Status.” Scroll
down through the list to locate the failed
component. Follow the procedures in
the Maintenance chapter to replace the
failed component.
LED and audible alarms Power-on self-test failed.
From the Operator Control Panel,
“Hardware Menu” from the Main Menu
and select “POST Results.” Scroll down
through the list to locate the failed
component, see Power-On Self
Diagnostics described earlier in this
guide.
indicate the system
failed the diagnostic
test.
LED Status
Reason
Solution
Operator Control Panel Cooling fan failure.
display indicates
cabinet temperature
From the Operator Control Panel,
“Hardware Menu” from the Main Menu
and select “Component Status.” Scroll
down through the list to locate the failed
threshold has been
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
exceeded.
component. Follow the procedures in
the Maintenance chapter to replace the
failed component.
Change the temperature threshold
value, see Heat Threshold described
earlier in this guide..
Temperature threshold too low.
Cooling fan vent blocked.
Examine the cooling fan vents for
blockage and clear.
The location chosen for the DEU
probably has poor air circulation.
Choose a better location.
Inadequate ventilation around the
DEU.
Status Indicator LEDs
not functioning properly. connected.
SCSI data cable not properly
Verify that the SCSI data cable is
properly connected to the DEU SCSI-2
connector and to the controller card.
A specific drive’s Status An assigned drive has failed. The
Replace the disk drive and begin
LED is blinking amber
and the Channel Mode
LED is steady amber.
DEU is in a non-fault tolerant mode. rebuilding the array, see Replacing a
Disk Drive described earlier in this
guide.
A specific drive’s Status An assigned drive has failed. The
Replace the failed disk drive (Drive’s
LED is blinking amber,
the remainder of the
drive’s Status LEDs in
that array are steady
amber, and the
DEU is in a non-fault tolerant mode Status LED blinking amber).
and a rebuild operation is in
progress.
Channel Mode LED is
steady amber.
A specific drive’s Status The disk drive is missing. The DEU Insert a disk drive and begin an array
LED is OFF and the
Channel Mode LED is
steady amber.
is in a non-fault tolerant mode.
rebuild, see Replacing a Disk Drive
described earlier in this guide.
A specific drive’s Status A drive has not been assigned into
Assign the drive to an array, refer to the
LED is blinking green
an array or the drive is a hot spare, RAID Utilities User’s Guide.
and the Channel Mode however it is in a ready state.
LED is steady green.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
LED Status
Reason
Solution
Status Indicator LEDs
not functioning properly. connected.
SCSI data cable not properly
Verify that the SCSI data cable is
properly connected to the DEU SCSI-2
connector and to the controller card.
A specific drive’s Status An assigned drive has failed. The
Replace the disk drive and begin
LED is blinking amber
and the Channel Mode
LED is steady amber.
DEU is in a non-fault tolerant mode. rebuilding the array, see Replacing a
Disk Drive described earlier in this
guide.
A specific drive’s Status An assigned drive has failed. The
Replace the failed disk drive (Drive’s
LED is blinking amber,
the remainder of the
drive’s Status LEDs in
that array are steady
amber, and the
DEU is in a non-fault tolerant mode Status LED blinking amber).
and a rebuild operation is in
progress.
Channel Mode LED is
steady amber.
A specific drive’s Status The disk drive is missing. The DEU Insert a disk drive and begin an array
LED is OFF and the
Channel Mode LED is
steady amber.
is in a non-fault tolerant mode.
rebuild, see Replacing a Disk Drive
described earlier in this guide.
A specific drive’s Status A drive has not been assigned into
LED is blinking green
Assign the drive to an array, refer to the
an array or the drive is a hot spare, Ultra S2S RAID Controller User’s Guide.
and the Channel Mode however it is in a ready state.
LED is steady green.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
A Certificate and Agency Information
FCC Radio Frequency Interference Statement
Th is equ ipm en t h a s been t est ed a n d fou n d t o com ply
wit h t h e lim it s for a Cla ss B digit a l device, pu r su a n t t o
P a r t 15 of t h e F CC r u les. Th ese lim it s a r e design ed t o
pr ovide r ea son a ble pr ot ect ion a ga in st h a r m fu l
in t er fer en ce in a r esiden t ia l in st a lla t ion . Th is
equ ipm en t gen er a t es, u ses a n d ca n r a dia t e r a dio
fr equ en cy en er gy, a n d if n ot in st a lled a n d u sed in
a ccor da n ce wit h t h e in st r u ct ion s, m a y ca u se h a r m fu l
in t er fer en ce t o r a dio or t elevision com m u n ica t ion s.
H owever , t h er e is n o gu a r a n t ee t h a t t h e in t er fer en ce
will n ot occu r in a pa r t icu la r in st a lla t ion . If t h is
equ ipm en t does ca u se h a r m fu l in t er fer en ce t o r a dio or
t elevision r ecept ion , wh ich ca n be det er m in ed by
t u r n in g t h e equ ipm en t off a n d on , t h e u ser is
en cou r a ged t o t r y t o cor r ect t h e in t er fer en ce by on e or
m or e of t h e followin g m ea su r es:
■
■
Reor ien t or r eloca t e t h e r eceivin g a n t en n a .
In cr ea se t h e sepa r a t ion bet ween t h e equ ipm en t a n d
r eceiver .
■
■
Con n ect t h e equ ipm en t t o a n ou t let on a cir cu it
ot h er t h a n t h a t t o wh ich t h e r eceiver is con n ect ed.
Con su lt t h e dea ler or a n exper ien ced r a dio/TV
t ech n icia n for h elp.
Th e m a n u fa ct u r er is n ot r espon sible for a n y
in t er fer en ce ca u sed by u n a u t h or ized m odifica t ion s t o
t h is equ ipm en t . It is t h e u ser ’s r espon sibilit y t o cor r ect
su ch in t er fer en ce. You a r e a lso wa r n ed, t h a t a n y
ch a n ges t o t h is cer t ified device will void you r lega l
r igh t t o oper a t e it .
C a u t i o n : Dr ives a n d con t r oller /a da pt er ca r ds descr ibed
in t h is m a n u a l sh ou ld on ly be in st a lled in U L-list ed
a n d CSA cer t ified com pu t er s t h a t give specific
in st r u ct ion s on t h e in st a lla t ion a n d r em ova l of
a ccessor y ca r ds (r efer t o you r com pu t er in st a lla t ion
m a n u a l for pr oper in st r u ct ion s).
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
At t e n t i o n : Les lect eu r s et ca r t es con t r ôleu r s décr it s ici
n e doiven t êt r e m on t és qu e su r des or din a t eu r s
h om ologu és (U L et CSA) et livr és a vec des m a n u els
con t en a n t les in st r u ct ion s d’in st a lla t ion et de r et r a it
des a ccessoir es. Repor t ez-vou s a u m a n u el d’in st a lla t ion
de vot r e or din a t eu r .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Power Cord Selection
■
Th is su bsyst em is in t en ded for in door u se on ly.
■
Th is su bsyst em is in t en ded t o be plu gged in t o a 6A
br a n ch cir cu it in E u r ope.
■
To select t h e pr oper power cor d:
F or 110 Volt Oper a t ion – U se a U L List ed/CSA La beled
cor d set con sist in g of a m in im u m 18 AWG, t ype SVT or
SJ T t h r ee con du ct or cor d, t er m in a t in g in a m olded
con n ect or body h a vin g a n IE C CE E -22 fem a le
con figu r a t ion on on e en d a n d a m olded-on pa r a llel
bla de gr ou n din g t ype a t t a ch m en t plu g r a t ed 15A, 125V
con figu r a t ion (5 - 15P ) a t t h e ot h er en d.
F or 230 Volt Oper a t ion (N or t h Am er ica ) – U se a U L
List ed/CSA La beled cor d set con sist in g of a m in im u m
18 AWG, t ype SVT or SJ T t h r ee con du ct or cor d,
t er m in a t in g in a m olded con n ect or body h a vin g a n IE C
CE E -22 fem a le con figu r a t ion on on e en d a n d a m olded-
on t a n dem bla de gr ou n din g t ype a t t a ch m en t plu g r a t ed
15A, 250V con figu r a t ion (6 - 15P ) a t t h e ot h er en d.
F or 230 Volt Oper a t ion (E u r ope) – U se a cor d set
m a r k ed “H AR”, con sist in g of a H 05VV-F cor d t h a t h a s a
m in im u m 0.75 squ a r e m m dia m et er con du ct or s
pr ovided wit h a n IE C 320 r ecept a cle a n d a m a le plu g
for t h e cou n t r y of in st a lla t ion r a t ed 6A, 250V.
N o t e : Th e su bsyst em a u t om a t ica lly select s t h e pr oper
set t in gs for t h e in pu t volt a ge. Th er efor e, n o a ddit ion a l
a dju st m en t s a r e n ecessa r y t o con n ect t h e u n it t o a n y
in pu t volt a ge wit h in t h e r a n ge m a r k ed on t h e dr ive.
■
Da s La u fwer k sollt e n ich t im F r eien ver wen det
wer den .
■
In E u r opa , sollt e da s La u fwer k a n ein en 6A-
St r om k r eis a n gesch lossen wer den .
■
Zu r Wa h l des k or r ek t en N et zk a bels bea ch t en Sie
bit t e folgen des:
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
230V-Bet r ieb (E u r opa ) – Ver wen den Sie N et zk a bel
der Bezeich n u n g “H AR” die H 05VV-F -Ka bel u n d
ein en Leit u n gsdu r ch m esser von m in dest en s 0,75
m m 2 a u fweisen . Ver Wen den Sie ein e IE C 320-
Bu ch se u n d ein en fü r da s In st a lla t ion sla n d
pa ssen den St eck er , der a u f 6A u n d 250V gesich er t
ist .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
B Glossary
Th e followin g t er m s a r e u sed t h r ou gh ou t t h is m a n u a l
a n d m a y be h elpfu l ba ck gr ou n d in for m a t ion on t h e
t ech n ology.
Asynchronous Operations
Cache Flush
Operations that bear no relationship to each other in time and can
overlap. The concept of asynchronous I/O operations is central to
independent access arrays in throughput-intensive applications.
Refers to an operation where all un-written blocks in a Write-Back
Cache are written to the target disk. This operation is necessary
before powering down the system.
Channel
Refers to one of the SCSI bus connectors on the controllers or
termination interface cards.
Consistency Check
Refers to a process where the integrity of redundant data is verified.
For example, a consistency check of a mirrored drive will make sure
that the data on both drives of the mirrored pair are exactly the same.
For RAID level 3 and 5 redundancy, a consistency check will involve
reading all associated data blocks, computing parity, reading parity,
and verifying that the computed parity matches the read parity.
Disconnect/Reconnect
Disconnect is a function that allows a target SCSI device (typically a
disk drive that received a request to perform a relatively long I/O
operation) to release the SCSI bus so that the controller can send
commands to other devices. When the operation is complete and the
SCSI bus is needed by the disconnected target again, it is
reconnected.
Disk Mirroring
Disk Spanning
Data written to one disk drive is simultaneously written to another disk
drive. If one disk fails, the other disk can be used to run the system
and reconstruct the failed disk.
Several disks appear as one large disk using this technology. This
virtual disk can then store data across disks with ease without the
user being concerned about which disk contains what data. The
subsystem handles this for the user.
Disk Striping
Duplexing
Data is written across disks rather than on the same drive. Segment 1
is written to drive 0, segment 2 is written to drive 1, and so forth until a
segment has been written to the last drive in the chain. The next
logical segment is then written to drive 0, then to drive 1, and so forth
until the write operation is complete.
This refers to the use of two controllers to drive a disk subsystem.
Should one of the controllers fail, the other is still available to provide
disk I/O. In addition, depending how the controller software is written,
both controllers may work together to read and write data
simultaneously to different drives.
Fault-Tolerant
Hot Spare
When something is fault-tolerant it is resistant to failure. A RAID 1
mirrored subsystem, for example, is fault-tolerant because it can still
provide disk I/O if one of the disk drives in a mirrored system fails.
The “Hot Spare” is one of the most important features the controller
provides to achieve automatic, non-stop service with a high degree of
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
fault tolerance. This rebuild operation will be carried out by the
controller automatically when a SCSI disk drive fails.
Logical Drive
Mapping
A set of contiguous chunks of a physical disk. Logical disks are used
in array implementations as constituents of logical volumes or
partitions. Logical disks are normally transparent to the host
environment, except when the array containing them is being
configured.
The conversion between multiple data addressing schemes,
especially conversions between member disk block addresses of the
virtual disks presented to the operating environment by the array
management software.
Mirroring
Refers to the 100% duplication of data on one disk drive to another
disk drive. Each disk will be the mirror image of the other.
Partition
An array virtual disk made up of logical disks rather than physical
ones. Also called logical volume.
Physical Drive
A physical array (or drive) is a collection of physical disks governed by
the RAID management software. A physical drive appears to the host
computer as one or more logical drives.
RAID
(Redundant Array of Independent Disks) An approach to using
multiple low cost drives as a group to improve performance, yet also
provide a degree of redundancy that makes data loss remote.
RAID 0
Block “striping” is provided, yielding higher performance than is
possible with individual drives. This level does not provide any
redundancy.
RAID 1
RAID 10
RAID 3
RAID 30
RAID 5
Drives are paired and mirrored. All data is 100% duplicated on an
equivalent drive.
RAID 10 is a combination of RAID levels 0 and 1. The data is striped
across disks as in RAID 0. Each disk has a mirror disk, as in RAID 1.
Data is striped across several physical drives. For data redundancy
one drive is encoded with rotated XOR redundancy.
Data striping of two or more RAID 3 arrays. RAID level 30 is a
combination of 0 and 3.
Data is striped across several physical drives. For data redundancy
drives are encoded with rotated XOR redundancy.
RAID 50
RAID level 50 is a combination of RAID level 0 and 5.
RAID Controller
This refers to the controller card that routes data to and/ or from the
CPU. Disk array controllers perform all RAID algorithms onboard the
controller.
Rebuild
The regeneration of all data from a failed disk in a RAID level 1, 3, 5,
or 6 array to a replacement disk. A disk rebuild normally occurs
without interruption of application access to data stored on the array
virtual disk.
Rotated XOR Redundancy
This term (also known as “parity”) refers to a method of providing
complete data redundancy while requiring only a fraction of the
storage capacity for redundancy. In a system configured under RAID
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
3 and 5, all data and parity blocks are divided between the drives in
such a way that if any single drive is removed (or fails), the data on it
can be reconstructed using the data on the remaining drives. (XOR
refers to the Boolean “Exclusive-OR” operator.)
SAF-TE
Is the acronym for SCSI Accessed Fault-Tolerant Enclosures. It is a
monitoring and communication specification developed by Conner
(nStor) and Intel for sending and receiving server and storage system
status information via the SCSI bus.
Session
Refers to the period of time between any two consecutive system
shutdowns. System shutdown may be either a power off/on, or a
hardware reset.
SCSI Drive
A disk drive equipped with a small computer system interface (SCSI).
Each disk drive will be assigned a SCSI address (or SCSI ID), which
is a number from 0 to 15. The SCSI address uniquely identifies the
drive on the SCSI bus or channel.
Spanning
Disk spanning allows multiple disk drives to function like one big drive.
Spanning overcomes lack of disk space and simplifies storage
management by combining existing resources or adding relatively
inexpensive resources.
Striping
Disk striping writes data across multiple disks rather than on one disk.
disk striping involves partitioning each drive storage space into stripes
that can vary in size from one sector (1 KB) to several megabytes.
Stripe Order
The order in which SCSI Drives appear within a Physical Pack. This
order must be maintained, and is critical to the controller’s ability to
“Rebuild” failed drives.
Stripe Width
Target ID
Refers to the number of kilobytes per stripe block.
A target ID is the SCSI ID of a device attached to the disk array
controller. Each SCSI channel can have up to sixteen SCSI devices
(target ID from 0 to 15) attached to it.
Write-Through Cache
Write-Back Cache
Refers to a cache writing strategy whereby data is written to the SCSI
Drive before a completion status is returned to the host operating
system. This caching strategy is considered more “secure,” since a
power failure will be less likely to cause loss of data. However, a
Write-Through cache results in a slightly lower performance, in most
environments.
Refers to a caching strategy whereby write operations result in a
completion signal being sent to the host operating system as soon as
the cache (not the disk drive) receives the data to be written. The
target SCSI Drive will receive that data at a more appropriate time, in
order to increase controller performance.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
C Technical Information
Specifications
DEU
Operating Environment
Relative Humidity
Operating/Non-Operating
Power Requirements
40°F to 94°F (+5°C to +34°C)
5% - 95% (non-condensing)
100 - 240 VAC (auto-sensing)
50-60 Hz
6.0 Amperes
3 x 150 watts
Rack Mount System
Dimensions (HxWxD) w/o Handles
Tower-Based System
6.83" x 17.40" x 19.00"
Dimensions (HxWxL)
17.40" x 6.83" x 19.00"
Weight (basic configuration of cabinet includes two
cooling fans)
48.0 lbs. without drives installed
56.6 lbs. with three drives installed
-200 to 10,000 feet
Altitude
Number of Drives Supported
Interface Transfer Rate
Host Interface
8
Up to 40 MB/sec
Fast/Wide SCSI-3
Fast/Wide SCSI-3
Automatic Termination
FCC, Part 15, Class B
EN55022-B
Drive Interface
HDD Termination
Electromagnetic Emissions Requirements (EMI)
Safety Requirements
UL1950
CSA C22.2 #950
TUV/EN60950
DEU (continued)
CE Compliance (EMC)
89/336/EEC EMC Directive
1.0 G, 2 - 50 ms
Shock
Operating
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Non-Operating
20.0 G, 2 - 20 ms
Vibration
Operating
Non-Operating
5 - 500 Hz, 0.25 G (pk to pk)
5 - 500 Hz, 1.0 G (pk to pk)
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Connectors and Jumpers
Th is sect ion pr ovides in for m a t ion a bou t t h e con n ect or
pin ou t s on t h e t er m in a t ion in t er fa ce ca r d a n d ju m per
set t in gs on t h e ba ck pla n e pr in t ed cir cu it boa r d for you r
DE U su bsyst em .
Connectors
Loca t ed on ea ch t er m in a t ion in t er fa ce ca r d a r e t wo
VDH SCSI con n ect or s. Th ey pr ovide t h e in pu t /ou t pu t
in t er fa ce fr om t h e su bsyst em bu s t o t h e RAID
con t r oller or h ost a da pt er ca r d.
VHD/HD 68-pin SCSI
P-Cable Connector
Pin-out
1
34
68
35
Pin
Conductor
Pin
Conductor
Signal Name Number Number
Signal Name Number Number
+DB(12)
+DB(13)
+DB(14)
+DB(15)
+DB(P1)
+DB(0)
+DB(1)
+DB(2)
+DB(3)
+DB(4)
1
1
– DB(12)
– DB(13)
– DB(14)
– DB(15)
– DB(P1)
– DB(0)
– DB(1)
– DB(2)
– DB(3)
– DB(4)
35
36
37
38
39
40
41
42
43
44
Pin
2
2
3
4
3
5
6
4
7
8
5
9
10
6
11
12
7
13
14
8
15
16
9
17
18
10
19
20
Pin
Conductor
Conductor
Signal Name Number Number
Signal Name Number Number
+DB(5)
+DB(6)
11
12
21
23
– DB(5)
– DB(6)
45
46
22
24
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
+DB(7)
+DB(P)
GROUND
DIFFSENS
TERMPWR
TERMPWR
RESERVED
GROUND
+ATT
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
– DB(7)
– DB(P)
GROUND
GROUND
TERMPWR
TERMPWR
RESERVED
GROUND
– ATN
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
GROUND
+BSY
GROUND
– BSY
+ACK
– ACK
+RST
– RST
+MSG
– MSG
+SEL
– SEL
+C/D
– C/D
+REQ
– REQ
+I/O
– I/O
+DB(8)
+DB(9)
+DB(10)
+DB(11)
– DB(8)
– DB(9)
– DB(10)
– DB(11)
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Jumpers
C a u t i o n : J u m per con figu r a t ion t o be per for m ed by
qu a lified ser vice per son n el on ly.
Discon n ect t h e AC power cor d pr ior t o a ccessin g a n y
com pon en t in side t h e r ea r ca bin et .
Loca t ed on t h e ba ck pla n e pr in t ed cir cu it boa r d a r e six
ju m per block s. F r om t h ese ju m per s syst em in t egr a t or s
ca n m a n u a lly con figu r e t h e DE U su bsyst em . To ch a n ge
t h e ju m per set t in g, pu ll t h e ju m per plu g off it s pin (s)
a n d ca r efu lly fit in down on t o t h e pin (s) a s in dica t ed.
Th is a llows t h e u ser t o m a k e r ever sible ch a n ges t o t h e
cir cu it r y on t h e pr in t ed cir cu it boa r d.
Th e ju m per set t in gs a r e k n own a s “open ” or
“u n ju m per ed” a n d “ju m per ed.” Wh en u n ju m per in g t h e
set t in g r em ove t h e ju m per plu g fr om bot h pin s a n d sea t
it over ju st on e of t h e pin s. Th is a llows t h e ju m per plu g
t o be st or ed for la t er u se.
JP3
JP3
JP2
S2S
SCSI
IDs
8
1
8
JP4
S2S
CONFIG
1
JP2
16
SCSI
IDs
1
JP4
J15
J17
J15
4
FAN
1
4
OEM FAN
1
JP5
J17
4
3
REMOTE
DELAY
2 1
JP5
Rear View of Backplane PCB
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
JP2 (SCSI-to-SCSI Configuration)
C a u t i o n : J u m p er con figu r a t ion t o be p er for m ed by
qu a lified s er vice p er s on n el on ly.
Th is ju m per (J P 2) is u sed t o pla ce t h e SCSI-t o-SCSI
RAID con t r oller in a con figu r a t ion t h a t is k n own t o t h e
DE U su bsyst em . Th is pr ocess is a ccom plish ed by
a ddin g ju m per s t o J P 2. Th e ju m per block is a fou r
posit ion du a l-r ow h ea der .
8
S2S
CONFIG
1
JP2
Jumper
Positions SCSI-to-SCSI Settings
1 & 2
3 &4
Reserved.
Add this jumper to place the SCSI-to-SCSI controller into
VT100 mode for the serial channel. Remove the jumper to
place the SCSI-to-SCSI controller into the SLIP port mode.
5 & 6
7 & 8
Add this jumper to place the SCSI-to-SCSI controller into
the Fixed Baud Rate mode for the serial channel. Remove
the jumper to place the SCSI-to-SCSI controller into the
Variable Baud Rate mode for the serial channel.
Add this jumper to place the SCSI-to-SCSI controller in a
Master configuration. Remove the jumper to place the
SCSI-to-SCSI controller in a Slave mode.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
JP3 (SCSI-to-SCSI IDs)
C a u t i o n : J u m p er con figu r a t ion t o be p er for m ed by
qu a lified s er vice p er s on n el on ly.
Th ese ju m per s (J P 3) a r e u sed t o m a n u a lly set t h e SCSI-
TO-SCSI IDs for t h e SCSI-t o-SCSI RAID con t r oller . J P 3
is a n fou r posit ion du a l-r ow h ea der .
JP3
S2S
SCSI
IDs
8
1
Jumper Positions
1 & 2
ON
3 & 4
ON
5 & 6
ON
7 & 8
ON
SCSI-to-SCSI ID Settings
15
14
13
12
11
10
9
OFF
ON
ON
ON
ON
OFF
OFF
ON
ON
ON
OFF
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
OFF
ON
ON
ON
OFF
OFF
ON
ON
OFF
ON
ON
8
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
7
OFF
ON
ON
ON
6
OFF
OFF
ON
ON
5
OFF
ON
ON
4
OFF
OFF
OFF
OFF
3
OFF
ON
ON
2
OFF
OFF
1
OFF
0
JP4 (SCSI ID Settings)
C a u t i o n : J u m p er con figu r a t ion t o be p er for m ed by
qu a lified s er vice p er s on n el on ly.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Th ese ju m per s (J P 4) a r e u sed t o m a n u a lly set t h e SCSI
IDs for a ll of t h e disk dr ive slot s. J P 4 is a n eigh t
posit ion du a l-r ow h ea der .
16
SCSI
IDs
1
JP4
Jumper Positions for Drives 1, 2, 3, and 4 ID Settings
1 & 2
ON
3 & 4
ON
5 & 6
ON
7 & 8
ON
SCSI ID (1, 2, 3, and 4)
0, 1, 2, 3
OFF
ON
ON
ON
ON
0, 1, 2, 4
OFF
OFF
ON
ON
ON
4, 5, 6, 7
OFF
ON
ON
ON
4, 5, 6, 8
OFF
OFF
OFF
OFF
ON
ON
5, 6, 7, 8
OFF
ON
ON
ON
5, 6, 8, 9
OFF
OFF
ON
ON
8, 9, 10, 11
9, 10, 11, 12
10, 11, 12, 13
12, 13, 14, 15
OFF
ON
ON
OFF
OFF
OFF
ON
ON
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Jumper Positions for Drives 5, 6, 7, and 8 ID Settings
9 & 10
ON
11 & 12 13 & 14 15 & 16 SCSI ID (5, 6, 7, and 8)
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
0, 1, 2, 3
OFF
ON
ON
ON
0, 1, 2, 4
OFF
OFF
ON
ON
4, 5, 6, 7
OFF
ON
ON
4, 5, 6, 8
OFF
OFF
OFF
OFF
ON
5, 6, 7, 8
OFF
ON
ON
5, 6, 8, 9
OFF
OFF
ON
8, 9, 10, 11
9, 10, 11, 12
10, 11, 12, 13
12, 13, 14, 15
OFF
ON
OFF
ON
ON
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
JP5 (SCA Remote/Delay Start)
C a u t i o n : J u m p er con figu r a t ion t o be p er for m ed by
qu a lified s er vice p er s on n el on ly.
Th e spin -u p of t h e dr ive slot s is det er m in ed by a ddin g
ju m per s t o J P 5. J P 5 is a t wo posit ion du a l-r ow h ea der .
P osit ion 1 & 2 con t r ol t h e “Dela yed_St a r t ” sign a l a n d
posit ion 3 & 4 con t r ol t h e “Rem ot e_St a r t ” sign a l.
4 3
REMOTE
DELAY
21
JP5
Pins 1 and 2 Pins 3 and 4 Drive Spinup Mode
ON
ON
Motor spins up only on SCSI “start”
commands.
ON
OFF
Motor spins up after a delay of 12
(may vary depending on drive type)
seconds times the numeric SCSI ID
setting of the associated drive.
OFF
OFF
ON
Motor spins up only on SCSI “start”
commands.
OFF
Motor spins up at DC power on.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
J15 (FAN) and J17 (OEM FAN)
C a u t i o n : J u m p er con figu r a t ion t o be p er for m ed by
qu a lified s er vice p er s on n el on ly.
Th er e a r e t wo sepa r a t e fa n con n ect or s t h a t a r e loca t ed
a t J 15 a n d J 17. F a n con n ect or J 15 is u sed wh en a SAF -
TE ca r d is pr esen t in t h e DE U . Wh en t h e fa n s a r e
plu gged in t o J 15, t h e SAF -TE ca r d con t r ols a n d
m on it or s fa n speed.
F a n con n ect or J 17 is u sed in OE M a pplica t ion s wh en
t h er e is n o SAF -TE ca r d in st a lled. F a n con n ect or J 17
su pplies ea ch fa n wit h +12 volt s for fu ll speed
oper a t ion .
J15
4
FAN
1
4
OEM FAN
1
J17
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
D Option Cards
Introduction
Th e U lt r a E xt en der a n d Differ en t ia l Con ver t er Opt ion
ca r ds pr ovide a sin gle solu t ion a llowin g t h e ext en sion
of device con n ect ivit y a n d/or ca ble len gt h of t h e SCSI
bu s for t h e DE U su bsyst em s.
Wh en t h e U lt r a E xt en der ca r d is u sed, t h e cir cu it r y
fu n ct ion s a s a SCSI bu s r epea t er for m u lt iple sin gle-
en ded t o sin gle-en ded ca blin g sch em es wh ile bein g
elect r ica lly isola t ed fr om ea ch ot h er . Wh en t h e
Differ en t ia l Con ver t er ca r d is u sed, t h e cir cu it r y
fu n ct ion s a s a SCSI bu s con ver t er for differ en t ia l t o
sin gle-en ded ca blin g sch em es a ga in wh ile bein g
elect r ica lly isola t ed fr om ea ch ot h er . As SCSI com m a n d
a n d da t a pa sses fr om t h e sou r ce bu s t o t h e loa d bu s,
sign a l filt er in g a n d r e-t im in g a r e em ployed t o m a in t a in
t h e SCSI sign a l.
Th e ca r ds fea t u r e Toler AN T® t ech n ology, wh ich
in clu des a ct ive n ega t ion on t h e SCSI dr iver s a n d in pu t
sign a l filt er in g on t h e SCSI r eceiver s. Act ive n ega t ion
ca u ses t h e SCSI Requ est , Ack n owledge, Da t a , a n d
P a r it y sign a ls t o be a ct ively dr iven h igh r a t h er t h a n
pa ssively pu lled u p by t er m in a t or s. Th e r eceiver
t ech n ology im pr oves da t a in t egr it y in u n r elia ble
ca blin g en vir on m en t s, wh er e ot h er devices wou ld be
su bject t o da t a cor r u pt ion . Th e Toler AN T r eceiver s
filt er t h e SCSI bu s sign a ls t o elim in a t e u n wa n t ed
t r a n sit ion s wit h ou t lon g sign a l dela ys. Th is im pr oved
dr iver a n d r eceiver h elps elim in a t e dou ble clock in g of
da t a , t h e la r gest r elia bilit y issu e wit h SCSI oper a t ion s.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Features
Th e followin g a r e m a jor fea t u r es of t h e Opt ion Ca r ds:
D u a l C o n fi g u r a t i o n s — Bot h ca r ds a va ila ble in
sin gle a n d du a l ch a n n el m odels.
H i g h S p e e d T r a n s fe r s — Asyn ch r on ou s or
syn ch r on ou s da t a t r a n sfer r a t es u p t o 40 MBs wit h
U lt r a Wide SCSI.
N o R e q u i r e d S C S I I D — Does n ot con su m e a SCSI
ID on t h e SCSI bu s.
F a s t -20 S u p p o r t — Com plet e su ppor t for SCSI-3
(F a st -20) a n d ba ck wa r ds com pa t ible wit h SCSI-2
st a n da r ds.
Ac t i v e N e g a t i o n — E m ploys Toler AN T a ct ive
n ega t ion t ech n ology.
E l e c t r i c a l I s o l a t i o n — P r ovides in t er n a l device
pr ot ect ion a ga in st ext er n a lly gen er a t ed n oise on t h e
SCSI bu s.
E x p a n d e d T e c h n o l o g y — E xt en ds U lt r a SCSI
ca ble len gt h s a n d t h e t ot a l n u m ber of U lt r a SCSI
devices.
I n d e p e n d e n t P l a t fo r m — Com plet ely soft wa r e a n d
h ost syst em in depen den t .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Quick Install
Th e followin g pr ocedu r es ou t lin e t h e st eps n ecessa r y t o
set u p you r DE U su bsyst em s. Th ese gu idelin es a r e
gen er a lly for t h ose in dividu a ls wh o don ’t lik e t o r ea d
m a n u a ls.
I n s t a l l t h e D i s k D r i v e s — Open t h e fr on t door of
ea ch ca bin et a n d in ser t t h e disk dr ives. Be su r e
ea ch dr ive sea t s pr oper ly a n d t h e dr ive la t ch es a r e
secu r ed.
I n s t a l l t h e O p t i o n C a r d s — In st a ll t h e cor r ect
Opt ion ca r ds in t h e cor r ect slot for you r
con figu r a t ion .
C o n n e c t t h e C a b l e s — Con n ect t h e da t a a n d
ju m per ca bles. Refer t o DE U Su bsyst em s
In st a lla t ion s la t er in t h is sect ion for t h e su ppor t ed
con figu r a t ion s u n der Sin gle-en ded U lt r a SCSI or
Differ en t ia l SCSI.
C o n fi g u r e y o u r s y s t e m — Ru n you r syst em
con figu r a t ion pr ogr a m t o set u p t h e dr ives, a n d/or
you r RAID soft wa r e con figu r a t ion .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
DEU Subsystem Installations
Setup
Th is sect ion con t a in s t h e pr ocedu r es t o in st a ll a n d
con figu r e t h e U lt r a E xt en der a n d Differ en t ia l
Con ver t er Opt ion ca r ds in you r DE U disk a r r a y
su bsyst em s.
Th e in st a lla t ion is essen t ia lly a t h r ee st ep pr ocess: t h e
ca r ds a r e in st a lled in t h e DE U su bsyst em , t h e ca blin g
is com plet ed ba sed on t h e su ppor t ed con figu r a t ion , a n d
t h e a r r a y is t h en con figu r ed.
Sever a l r u les will a pply wh en ca blin g a n d con figu r in g
m u lt iple ca bin et s in a “m a st er /sla ve” en vir on m en t .
Th e DE U su bsyst em su ppor t s on e “m a st er ”
su bsyst em a n d u p t o t wo “sla ve” su bsyst em s
in t er con n ect ed.
N o m or e t h a n t wo Opt ion ca r ds ca n be in st a lled on
on e SCSI bu s (m a st er / sla ve en vir on m en t ).
Wh en DE U ’s a r e oper a t ed in split bu s m ode (du a l-
bu s m odu le in st a lled), a ll dr ives on on e ch a n n el
fr om on e ca bin et m u st be con n ect ed t o t h e sa m e
ch a n n el on t h e ot h er ca bin et . Ch a n n el 0 dr ives
ca n n ot be con n ect ed t o Ch a n n el 1 dr ives in a n y
con figu r a t ion n or ca n t h e r ever se con dit ion exist .
Wh en im plem en t in g a n U lt r a Wide SCSI
con figu r a t ion , ca ble len gt h s a r e lim it ed t o on e (1)
m et er fr om t h e U lt r a E xt en der ca r d t o t h e n ext
ca bin et .
Sin gle ch a n n el ca r ds m u st be in st a lled in t h e DE U
u pper or r igh t side Opt ion ca r d slot s.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Cabling Configuration
Th e ca blin g con figu r a t ion is divided in t o t wo
su bsect ion s in t h is sect ion , con figu r a t ion s per t a in in g t o
Sin gle-en ded U lt r a Wide SCSI a n d t h ose for
Differ en t ia l U lt r a Wide SCSI. Th ese t wo sect ion s a r e
divided in t o gr ou ps descr ibin g t h e ca bin et /ca blin g
sch em e a n d pr ovide t h e r ecom m en ded ca ble a n d
t er m in a t ion con figu r a t ion s wh en oper a t in g t h e DE U in
a specific m ode.
Ca ble len gt h is a pr im a r y con sider a t ion wh en
con figu r in g t h e su bsyst em s. Th er e a r e differ en t
lim it a t ion s for Sin gle-en ded U lt r a Wide SCSI (F a st -20)
a n d Differ en t ia l U lt r a Wide SCSI.
Ultra Wide SCSI
Accor din g t o SCSI-3 AN SI specifica t ion s (X3T10/1071D)
t h e t ot a l SCSI ca ble len gt h for Sin gle-en ded U lt r a Wide
SCSI is 3 m et er s (118 in ch es) wit h fou r SCSI devices
dist r ibu t ed even ly a cr oss t h e ca ble a n d 1.5 m et er s (59
in ch es) wit h eigh t dr ives dist r ibu t ed even ly a cr oss t h e
ca ble wit h ea ch SCSI device h a vin g a 25 pico fa r a d
loa d. By con t r ollin g t h e SCSI device loa din g a n d
im peda n ce on t h e SCSI bu s, SCSI device spa cin g a n d
ca ble len gt h s ca n va r y a n d be im pr oved. In a st a n da r d
con figu r a t ion , t h e DE U is design ed t o a ccom m oda t e a
t ot a l of n in e SCSI devices in a sin gle ca bin et (eigh t
dr ives a n d on e SAF -TE con t r oller ), a ll con n ect ed t o a
h ost con t r oller u sin g a 1 m et er ca ble. Th e DE U h a s a n
in t er n a l equ iva len t SCSI bu s ca ble len gt h of ju st u n der
1 m et er givin g a n over a ll ca ble len gt h of 2 m et er s
(ext er n a l 1 m et er ca ble plu s t h e in t er n a l 1 m et er
equ iva len t ca ble len gt h ).
Th e n u m ber of SCSI devices a n d ca ble len gt h s on t h e
SCSI bu s ca n a lso be in cr ea sed a n d im pr oved by a ddin g
SCSI bu ffer s t h a t r econ dit ion t h e SCSI sign a ls. Wit h
t h e opt ion a l U lt r a E xt en der ca r d in st a lled in t h e DE U ,
SCSI sign a ls a r e bu ffer ed a n d r econ dit ion ed a llowin g
t h e ext er n a l ca ble len gt h t o be in cr ea sed t o a m a xim u m
of 3 m et er s a n d st ill su ppor t n in e SCSI devices in a
Sin gle-en ded U lt r a SCSI en vir on m en t . Th e U lt r a
E xt en der F ea t u r e ca r d a lso pr ovides t h e DE U wit h t h e
a bilit y t o a dd a secon d ca bin et on t h e sa m e SCSI bu s
su ppor t in g a n a ddit ion a l six SCSI devices for a t ot a l of
sixt een SCSI devices. Th e m a xim u m n u m ber of SCSI
devices su ppor t ed by t h is specifica t ion on a sin gle bu s
is sixt een SCSI devices.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Differential SCSI
Accor din g t o SCSI-3 AN SI specifica t ion s for
Differ en t ia l U lt r a Wide SCSI, t h e t ot a l SCSI ca ble
len gt h is 25 m et er s (984 in ch es). Th e in t er n a l SCSI bu s
of t h e DE U is a Sin gle-en ded bu s a n d t h er efor e a
con ver sion is r equ ir ed wh en in t er fa cin g t o a n ext er n a l
differ en t ia l SCSI bu s.
Th e DE U su ppor t s Differ en t ia l SCSI by u sin g t h e
Differ en t ia l Con ver t er F ea t u r e ca r d. Th is ca r d pr ovides
t h e t er m in a t ion a n d dr iver s n ecessa r y t o in t er fa ce t o a
differ en t ia l SCSI bu s. Th e ext er n a l ca ble len gt h ca n be
u p t o a m a xim u m of 25 m et er s a s descr ibed by t h e
SCSI-3 AN SI specifica t ion s.
A sym pt om of exceedin g t h e ca ble lim it s is a SCSI bu s
lock u p or “fr eeze.” If you exper ien ce a sim ila r pr oblem
a n d a r e a wa r e of a ca blin g lim it issu e, r edu cin g t h e
len gt h of ca blin g a n d r et u r n in g t h e t ot a l len gt h t o
wit h in t h e specified lim it sh ou ld r esolve a n y pr oblem s.
If you h a ve a ca blin g issu e a n d r equ ir e m or e
in for m a t ion , con t a ct you r Ser vice P r ovider for fu r t h er
a ssist a n ce. Da t a loss is possible u n d er con d it ion s of
S CS I bu s locku p.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
N o t e : Sh ielded da t a ca bles, su ch a s t h ose pr ovided
wit h t h e su bsyst em , m u st be u sed t o pr even t r a dio
fr equ en cy in t er fer en ce. It is r ecom m en ded t h a t you u se
t h e ca bles pr ovided wit h you r syst em . Th ese ca bles
h a ve been t est ed a n d m eet st r in gen t gu idelin es set
for t h by t h e SCSI-3 AN SI specifica t ion s.
Guidelines
Befor e in st a lla t ion , you will n eed t o con sider t h e
followin g:
Iden t ify wh ich DE U su bsyst em will be t h e “m a st er ”
su bsyst em a n d wh ich will be t h e “sla ve”
su bsyst em (s). Th e Differ en t ia l Con ver t er a n d U lt r a
E xt en der ca r ds in st a ll differ en t ly for ea ch
con figu r a t ion .
Det er m in e wh ich m ode t h e DE U will be con figu r ed.
Th is in clu des t h e t ype of h ost con t r oller (RAID
Con t r oller – sin gle-en ded or SCSI h ost a da pt er –
differ en t ia l). Also t h e n u m ber of con t r oller s
(a da pt er s) t h a t will be u sed in t h e h ost syst em .
Det er m in e t h e n u m ber su bsyst em s t h a t will be u sed
per con t r oller (a da pt er ). E a ch sect ion pr ovides
dia gr a m s for t h e su ppor t ed con figu r a t ion s u sin g t h e
m in im u m n u m ber of con t r oller ch a n n els.
Ma xim izin g t h e ch a n n els per su bsyst em m a y be
a ccom plish ed by m ixin g su ppor t ed con figu r a t ion
wit h a va ila ble ch a n n els.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Installation Precautions
P lea se obser ve t h e followin g ca u t ion s a n d n ot es pr ior t o
a n d du r in g in st a lla t ion :
P r in t ed cir cu it boa r d com pon en t s a r e sen sit ive t o
elect r ost a t ic disch a r ge. To pr even t oper a t in g fa ilu r e
or da m a ge, obser ve t h e followin g: E st a blish a
gr ou n d for you r self by u sin g t h e wr ist gr ou n din g
st r a p, or by t ou ch in g t h e m et a l ch a ssis pr ior t o
h a n dlin g or in st a llin g t h e pr in t ed cir cu it boa r d
com pon en t s.
E xer cise ca r e wh en h a n dlin g a n y elect r ica l
com pon en t .
Do n ot over t igh t en t h e t h u m b scr ews on t h e fea t u r e
ca r ds a n d ca ble con n ect or s. Secu r e t h em t o fin ger
t igh t on ly.
In t er fa ce a n d fea t u r e ca r ds a r e k eyed a n d will
in st a ll on ly on e wa y.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Single-Ended Ultra Wide SCSI
P r ior t o begin n in g t h e ca blin g, iden t ify t h e
con figu r a t ion for you r in st a lla t ion . N ot e t h e ca r d
loca t ion s in t h e illu st r a t ion s for ea ch con figu r a t ion .
In st a ll you r ca r ds a n d con n ect t h e ca bles ba sed on t h e
pr ocedu r es a n d dia gr a m s sh own . Th e dia gr a m s depict
t h e con figu r a t ion u sin g t h e m in im u m n u m ber of
con t r oller ch a n n els.
Ultra Extender Card
Two Single-Bus Cabinets
Wit h t h is con figu r a t ion , you will h a ve u p t o fou r t een
(14) disk dr ives per con t r oller ch a n n el. Du e t o t h e
fou r t een dr ives per ch a n n el lim it a t ion , t wo disk dr ive
slot s will n ot be a va ila ble.
If you a r e u sin g m u lt iple con t r oller s you ca n expa n d
you r ca pa cit y by u sin g u p t o fou r con t r oller s per CP U
syst em . Refer t o “Defa u lt Con figu r a t ion s” la t er in t h is
sect ion for in for m a t ion on specia l SCSI ID set t in gs.
1 P ower off you r com pu t er syst em or wor k st a t ion .
2 Be su r e t o com plet e t h e “Set u p” a n d “Com pon en t
In st a lla t ion ” sect ion s descr ibed ea r lier in t h is Gu ide.
Th e DE U sh ips fr om t h e fa ct or y wit h I/O In t er fa ce
ca r ds in st a lled in bot h ca r d slot s. Th er efor e du r in g
t h e in st a lla t ion , you m a y be r equ ir ed t o r em ove on e
or bot h I/O In t er fa ce ca r ds.
3 Iden t ify t h e su bsyst em wh ich will be t h e m a st er
ca bin et . Loosen t h e t wo t h u m b scr ews a n d r em ove
t h e I/O In t er fa ce ca r d in st a lled in t h e u pper or r igh t
side ca r d slot of t h e m a st er ca bin et .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Ultra Extender
Option Card
Slave Cabinet
I/O Interface Card
4 In st a ll a sin gle ch a n n el U lt r a E xt en der F ea t u r e ca r d
in t h e u pper or r igh t side ca r d slot wh er e t h e I/O
In t er fa ce ca r d wa s r em oved a n d t igh t en t h e t h u m b
scr ews.
5 Repea t st eps 3 a n d 4 for t h e sla ve #1 ca bin et (secon d
su bsyst em ).
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
TOP Slave #1
Chl #0
TOP Master
Chl #1
Chl #0
Chl #1
1-CH Ultra
1-CH Ultra
Extender Card
SAF-TE Card
Extender Card
SAF-TE Card
I/O Interface Card
I/O Interface Card
Chl #0
Chl #1
Chl #0
Chl #1
Ultra Wide SCSI
Controller
Chl #1
1 meter Ultra Wide SCSI Jumper
Host Computer #1
Available Drive
Unavailable Drive
6 Con n ect on e en d of a 3 m et er da t a ca ble t o t h e
Ch a n n el #1 con n ect or on t h e RAID Con t r oller .
7 Con n ect t h e ot h er en d of t h e da t a ca ble t o t h e
Ch a n n el 1 con n ect or on t h e u pper or r igh t side
sin gle ch a n n el U lt r a E xt en der Opt ion ca r d in st a lled
in t h e m a st er ca bin et .
8 Con n ect on e en d of a 1 m et er ju m per ca ble t o t h e
Ch a n n el 0 con n ect or on t h e lower or left side I/O
In t er fa ce ca r d in t h e m a st er ca bin et .
9 Con n ect t h e ot h er en d of t h e 1 m et er ju m per ca ble t o
t h e Ch a n n el 1 con n ect or on t h e u pper or r igh t side
sin gle ch a n n el U lt r a E xt en der Opt ion ca r d in st a lled
in t h e Sla ve #1 ca bin et .
N o t e : SCSI t er m in a t ion is a u t om a t ic a n d r equ ir es n o
u ser con figu r a t ion .
10 P ower on t h e DE U su bsyst em s. Aft er t h e power -on
self-t est h a s com plet ed, H DD St a t u s a n d Ch a n n el
Mode LE Ds will be solid gr een .
11 Access t h e Opt ion s m en u on t h e Oper a t or Con t r ol
P a n el a n d ch oose t h e SAF TE CH AIN ID select ion .
Set t h e ca bin et iden t it ies of t h e m a st er a n d sla ve
su bsyst em s. Refer t o “SAF TE CH AIN ID” descr ibed
ea r lier in t h is Gu ide.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
12 Aft er set t in g t h e ca bin et iden t ifica t ion s you m u st
power cycle t h e su bsyst em s. Obser ve n or m a l power
cyclin g pr eca u t ion s by wa it in g a m in im u m of five
secon ds befor e a ddin g power a ga in .
Th is will r eset t h e SCSI IDs t o a defa u lt set t in g t h a t
pr even t s a SCSI ID con flict u n der n or m a l con dit ion s,
r efer t o “Defa u lt Con figu r a t ion s” la t er in t h is
sect ion .
13 P ower u p you r com pu t er syst em a n d r u n t h e
con figu r a t ion pr ogr a m .
Th is com plet es t h e set u p a n d con figu r a t ion .
Two Dual-Bus Cabinets
Wit h t h is con figu r a t ion you will h a ve u p t o eigh t (8)
disk dr ives per con t r oller ch a n n els. If you a r e u sin g
m u lt iple RAID Con t r oller s you ca n fu r t h er expa n d you r
ca pa cit y by u sin g u p t o fou r con t r oller s per CP U
syst em .
1 P ower off you r com pu t er syst em or wor k st a t ion .
2 Be su r e t o com plet e t h e “Set u p” a n d “Com pon en t
In st a lla t ion ” sect ion s descr ibed ea r lier in t h is Gu ide.
Th e DE U sh ips fr om t h e fa ct or y wit h I/O In t er fa ce
ca r ds in st a lled in bot h ca r d slot s. Th er efor e du r in g
in st a lla t ion , you m a y be r equ ir ed t o r em ove on e or
bot h I/O In t er fa ce ca r ds.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
3 Iden t ify t h e su bsyst em wh ich will be t h e m a st er
ca bin et . Loosen t h e t wo t h u m b scr ews a n d r em ove
t h e I/O In t er fa ce ca r d in st a lled in t h e u pper or r igh t
side ca r d slot of t h e m a st er ca bin et .
Ultra Extender
Option Card
Master Cabinet
I/O Interface Card
4 In st a ll a t wo-ch a n n el U lt r a E xt en der F ea t u r e ca r d
in t o t h e u pper or r igh t side ca r d slot wh er e t h e I/O
In t er fa ce ca r d wa s r em oved a n d t igh t en t h e t h u m b
scr ews.
5 On t h e su bsyst em t h a t will be t h e sla ve #1 ca bin et ,
r em ove t h e I/O In t er fa ce ca r d by loosen in g t h e t wo
t h u m b scr ews a n d r em ovin g t h e ca r d loca t ed in t h e
lower or left side ca r d slot .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
6 In st a ll a t wo-ch a n n el U lt r a E xt en der F ea t u r e ca r d
in t o t h e em pt y ca r d slot va ca t ed in t h e pr eviou s st ep
a n d t igh t en t h e t h u m b scr ews.
I/O Interface Card
Slave Cabinet
Ultra Extender
Option Card
7 Con n ect on e en d of a 3 m et er da t a ca ble t o t h e
Ch a n n el #1 con n ect or on t h e RAID Con t r oller .
TOP Master
Chl #1
TOP Slave #1
Chl #0
Chl #0
Chl #1
I/O Interface
Card
2-CH Ultra
Extender Card
SAF-TE Card
SAF-TE Card
I/O Interface Card
2-CH Ultra
Extender Card
Chl #0
Chl #1
Chl #0
Chl #1
Chl #1
Ultra Wide SCSI
Chl #2
1 meter Ultra Wide SCSI Jumper
1 meter Ultra Wide SCSI Jumper
Controller
Host Computer #1
8 Con n ect t h e ot h er en d of t h e da t a ca ble t o t h e
Ch a n n el 0 con n ect or on t h e u pper or r igh t side t wo-
ch a n n el U lt r a E xt en der Opt ion ca r d in st a lled in t h e
m a st er ca bin et .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
9 Con n ect on e en d of a 1 m et er ju m per ca ble t o t h e
Ch a n n el 0 con n ect or on t h e lower or left side I/O
In t er fa ce ca r d in t h e m a st er ca bin et .
10 Con n ect t h e ot h er en d of t h e 1 m et er ju m per ca ble t o
t h e Ch a n n el 0 con n ect or on t h e lower or left side
t wo-ch a n n el U lt r a E xt en der ca r d in st a lled in t h e
sla ve #1 ca bin et .
11 Con n ect on e en d of a secon d 3 m et er da t a ca ble t o
t h e Ch a n n el #2 con n ect or on t h e RAID Con t r oller (or
t h e Ch a n n el #1 con n ect or of a secon d sin gle ch a n n el
RAID Con t r oller ).
12 Con n ect t h e ot h er en d of t h e da t a ca ble t o t h e
Ch a n n el 1 con n ect or on t h e u pper or r igh t side t wo-
ch a n n el U lt r a E xt en der ca r d.
13 Con n ect on e en d of a secon d 1 m et er ju m per ca ble t o
t h e Ch a n n el 1 con n ect or on t h e lower or left side I/O
In t er fa ce ca r d in t h e m a st er ca bin et .
14 Con n ect t h e ot h er en d of t h e secon d 1 m et er ju m per
ca ble t o t h e Ch a n n el 1 con n ect or on t h e lower or left
side t wo-ch a n n el U lt r a E xt en der Opt ion ca r d
in st a lled in t h e sla ve ca bin et .
N o t e : SCSI t er m in a t ion is a u t om a t ic a n d r equ ir es n o
u ser con figu r a t ion
15 P ower on t h e DE U su bsyst em s. Aft er t h e power -on
self-t est h a s com plet ed, H DD St a t u s a n d Ch a n n el
Mode LE Ds will be solid gr een .
16 Access t h e Opt ion s m en u on t h e Oper a t or Con t r ol
P a n el a n d ch oose t h e SAF TE CH AIN ID select ion .
Set t h e ca bin et iden t it ies of t h e m a st er a n d sla ve
su bsyst em s. Refer t o “SAF TE CH AIN ID” descr ibed
ea r lier in t h is Gu ide.
17 Aft er set t in g t h e ca bin et iden t ifica t ion s you m u st
power cycle t h e su bsyst em s. Obser ve n or m a l power
cyclin g pr eca u t ion s by wa it in g a m in im u m of five
secon ds befor e a ddin g power a ga in .
Th is will r eset t h e SCSI IDs t o a defa u lt set t in g t h a t
pr even t s a SCSI ID con flict u n der n or m a l con dit ion s,
r efer t o “Defa u lt Con figu r a t ion s” la t er in t h is
sect ion .
18 P ower u p you r com pu t er syst em a n d r u n t h e
con figu r a t ion pr ogr a m .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Th is com plet es t h e set u p a n d con figu r a t ion .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
One Dual-Bus Cabinet and Two Single-Bus Cabinets
Wit h t h is con figu r a t ion you will h a ve u p t o t welve (12)
dr ives per con t r oller ch a n n el. If you a r e u sin g m u lt iple
RAID Con t r oller s you ca n fu r t h er expa n d you r ca pa cit y
by u sin g u p t o fou r con t r oller s per CP U syst em .
1 P ower off you r com pu t er syst em or wor k st a t ion .
2 Be su r e t o com plet e t h e “Set u p” a n d “Com pon en t
In st a lla t ion ” sect ion s descr ibed ea r lier in t h is Gu ide.
Th e DE U sh ips fr om t h e fa ct or y wit h I/O In t er fa ce
ca r ds in st a lled in bot h ca r d slot s. Th er efor e du r in g
in st a lla t ion , you m a y be r equ ir ed t o r em ove on e or
bot h I/O In t er fa ce ca r ds.
3 Iden t ify wh ich su bsyst em will be t h e m a st er
ca bin et . Loosen t h e t wo t h u m b scr ews a n d r em ove
t h e I/O In t er fa ce ca r d in st a lled in t h e lower or left
side ca r d slot of t h e m a st er ca bin et .
I/O Interface Card
Ultra Extender
Option Card
4 In st a ll a t wo-ch a n n el U lt r a E xt en der Opt ion ca r d
in t o t h e lower or left side ca r d slot wh er e t h e I/O
In t er fa ce ca r d wa s r em oved a n d t igh t en t h e t h u m b
scr ews.
5 On t h e su bsyst em t h a t will be t h e sla ve #1 ca bin et ,
r em ove t h e I/O In t er fa ce ca r d by loosen in g t h e t wo
t h u m b scr ews a n d r em ovin g t h e ca r d in t h e u pper or
r igh t side ca r d slot .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
6 In st a ll a t wo-ch a n n el U lt r a E xt en der Opt ion ca r d
in t o t h e em pt y ca r d slot va ca t ed in t h e pr eviou s st ep
a n d t igh t en t h e t h u m b scr ews.
Ultra Extender
Option Card
Slave Cabinet
I/O Interface Card
7 Repea t st eps 5 a n d 6 for t h e sla ve #2 ca bin et (t h ir d
ca bin et ).
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
8 Con n ect on e en d of a 3 m et er da t a ca ble t o t h e
Ch a n n el #1 con n ect or on t h e RAID Con t r oller .
1 meter Ultra Wide SCSI Jumper
1 meter Ultra Wide SCSI Jumper
TOP Master
Chl #0
TOP Slave #1
Chl #0
TOP Slave #2
Chl #0
Chl #1
Chl #1
Chl #1
1-CH Ultra
1-CH Ultra
I/O Inter-
face Card
SAF-TE Card
Extender Card
SAF-TE Card
Extender Card
SAF-TE Card
I/O Inter-
I/O Inter-
Chl #0
2-CH Ultra
Extender Card
face Card
face Card
Ultra Wide SCSI
Data Cable (3 meters)
Chl #1
Chl #0
Chl #1
Chl #0
Chl #1
Chl #1
Chl #2
Ultra Wide SCSI
Controller
Ultra Wide SCSI
Data Cable (3 meters)
Host Computer #1
9 Con n ect t h e ot h er en d of t h e da t a ca ble t o t h e
Ch a n n el 0 con n ect or on t h e lower or left side t wo-
ch a n n el U lt r a E xt en der Opt ion ca r d in st a lled in t h e
m a st er ca bin et .
10 Con n ect on e en d of a 1 m et er ju m per ca ble t o t h e
Ch a n n el 0 con n ect or on t h e u pper or r igh t side I/O
In t er fa ce ca r d in t h e m a st er ca bin et .
11 Con n ect t h e ot h er en d of t h e 1 m et er ju m per ca ble t o
t h e Ch a n n el 1 con n ect or on t h e u pper or r igh t side
sin gle-ch a n n el U lt r a E xt en der Opt ion ca r d in st a lled
in t h e sla veÊ #1 ca bin et .
12 Con n ect on e en d of t h e secon d 3 m et er da t a ca ble t o
t h e Ch a n n el #2 con n ect or on t h e RAID Con t r oller (or
t h e Ch a n n el #1 con n ect or of a secon d sin gle ch a n n el
RAID Con t r oller ).
13 Con n ect t h e ot h er en d of t h e da t a ca ble t o t h e
Ch a n n el 1 con n ect or on t h e lower or left side t wo-
ch a n n el U lt r a E xt en der Opt ion ca r d.
14 Con n ect on e en d of a secon d 1 m et er ju m per ca ble t o
t h e Ch a n n el 1 con n ect or on t h e u pper or r igh t side
I/O In t er fa ce ca r d in t h e m a st er ca bin et .
15 Con n ect t h e ot h er en d of t h e secon d 1 m et er ju m per
ca ble t o t h e Ch a n n el 1 con n ect or on t h e u pper or
r igh t side sin gle-ch a n n el U lt r a E xt en der Opt ion ca r d
in st a lled in t h e sla ve #2 ca bin et .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
N o t e : SCSI t er m in a t ion is a u t om a t ic a n d r equ ir es n o
u ser con figu r a t ion
16 P ower on t h e DE U su bsyst em s. Aft er t h e power -on
self-t est h a s com plet ed, H DD St a t u s a n d Ch a n n el
Mode LE Ds will be solid gr een .
17 Access t h e Opt ion s m en u on t h e Oper a t or Con t r ol
P a n el a n d ch oose t h e SAF TE CH AIN ID select ion .
Set t h e ca bin et iden t it ies of t h e m a st er a n d sla ve
su bsyst em s. Refer t o “SAF TE CH AIN ID” in t h e DE U
U ser ’s Gu ide.
18 Aft er set t in g t h e ca bin et iden t ifica t ion s you m u st
power cycle t h e su bsyst em s. Obser ve n or m a l power
cyclin g pr eca u t ion s by wa it in g a m in im u m of five
secon ds befor e a ddin g power a ga in .
Th is will r eset t h e SCSI IDs t o a defa u lt set t in g t h a t
pr even t s a SCSI ID con flict u n der n or m a l con dit ion s,
r efer t o “Defa u lt Con figu r a t ion s” la t er in t h is sect ion .
19 P ower u p you r com pu t er syst em a n d r u n t h e
con figu r a t ion pr ogr a m .
Th is com plet es t h e set u p a n d con figu r a t ion .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Differential Ultra Wide SCSI
P r ior t o begin n in g t h e ca blin g, iden t ify t h e
con figu r a t ion for you r in st a lla t ion . N ot e t h e ca r d
loca t ion s in t h e illu st r a t ion s for ea ch con figu r a t ion .
In st a ll you r ca r ds a n d con n ect t h e ca blin g ba sed on t h e
pr ocedu r es a n d dia gr a m s sh own . Th e dia gr a m s depict
t h e con figu r a t ion u sin g t h e m in im u m n u m ber of
con t r oller ch a n n els.
Differential Converter Card
Two Single-Bus Cabinets
Wit h t h is con figu r a t ion you will h a ve u p t o fou r t een
(14) disk dr ives per differ en t ia l h ost a da pt er ch a n n el.
Du e t o t h e fou r t een dr ives per ch a n n el lim it a t ion , t wo
disk dr ive slot s will n ot be a va ila ble.
If you a r e u sin g m u lt iple con t r oller s you ca n expa n d
you r ca pa cit y by u sin g u p t o fou r con t r oller s per CP U
syst em . Refer t o “Defa u lt Con figu r a t ion s” la t er in t h is
sect ion for in for m a t ion on specia l SCSI ID set t in gs.
1 P ower off you r com pu t er syst em or wor k st a t ion .
2 Be su r e t o com plet e t h e “Set u p” a n d “Com pon en t
In st a lla t ion ” sect ion s descr ibed ea r lier in t h is Gu ide.
Th e DE U sh ips fr om t h e fa ct or y wit h I/O In t er fa ce
ca r ds in st a lled in bot h ca r d slot s. Th er efor e du r in g
t h e in st a lla t ion , you m a y be r equ ir ed t o r em ove on e
or bot h I/O In t er fa ce ca r ds.
3 Iden t ify t h e su bsyst em wh ich will be t h e m a st er
ca bin et . Loosen t h e t wo t h u m b scr ews a n d r em ove
t h e I/O In t er fa ce ca r d in st a lled in t h e u pper or r igh t
side ca r d slot of t h e m a st er ca bin et .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Differential Converter
Option Card
Master Cabinet
I/O Interface Card
4 In st a ll a sin gle-ch a n n el Differ en t ia l Con ver t er
Opt ion ca r d in t o t h e u pper or r igh t side ca r d slot in
t h e m a st er ca bin et a n d t igh t en t h e t h u m b scr ews.
5 Loosen t h e t wo t h u m b scr ews a n d r em ove t h e I/O
In t er fa ce ca r d in st a lled in t h e u pper or r igh t side
ca r d slot of t h e sla ve #1 ca bin et .
6 In st a ll a sin gle-ch a n n el U lt r a E xt en der Opt ion ca r d
in t o t h e u pper or r igh t side ca r d slot in t h e sla ve #1
ca bin et a n d t igh t en t h e t h u m b scr ews.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Ultra Extender
Option Card
Slave Cabinet
I/O Interface Card
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
7 Con n ect on e en d of a 25 m et er da t a ca ble t o t h e
Ch a n n el #1 con n ect or on t h e differ en t ia l h ost
a da pt er .
TOP Master
Chl #1
TOP Slave #1
Chl #1
Chl #0
Chl #0
1-CH Ultra
1-CH Differential
Extender Card
SAF-TE Card
Converter Card
SAF-TE Card
I/O Interface Card
I/O Interface Card
Chl #0
Chl #1
Chl #0
Chl #1
Differential SCSI
Chl #1
1 meter Ultra Wide SCSI Jumper
Host Adapter
Host Computer #1
Available Drive
Unavailable Drive
8 Con n ect t h e ot h er en d of t h e da t a ca ble t o t h e
Ch a n n el 1 con n ect or on t h e u pper or r igh t side
sin gle-ch a n n el Differ en t ia l Con ver t er Opt ion ca r d
in st a lled in t h e m a st er ca bin et .
9 Con n ect on e en d of a 1 m et er ju m per ca ble t o t h e
Ch a n n el 0 con n ect or on t h e lower or left side I/O
In t er fa ce ca r d in t h e m a st er ca bin et .
10 Con n ect t h e ot h er en d of t h e 1 m et er ju m per ca ble t o
t h e Ch a n n el 1 con n ect or on t h e u pper or r igh t side
sin gle-ch a n n el U lt r a E xt en der Opt ion ca r d in st a lled
in t h e sla ve #1 ca bin et .
N o t e : SCSI t er m in a t ion is a u t om a t ic a n d r equ ir es n o
u ser con figu r a t ion .
11 P ower on t h e DE U su bsyst em s. Aft er t h e power -on
self-t est h a s com plet ed, H DD St a t u s a n d Ch a n n el
Mode LE Ds will be solid gr een .
12 Access t h e Opt ion s m en u on t h e Oper a t or Con t r ol
P a n el a n d ch oose t h e SAF TE CH AIN ID select ion .
Set t h e ca bin et iden t it ies of t h e m a st er a n d sla ve
su bsyst em s. Refer t o “SAF TE CH AIN ID” descr ibed
ea r lier in t h is Gu ide.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
13 Aft er set t in g t h e ca bin et iden t ifica t ion s you m u st
power cycle t h e su bsyst em s. Obser ve n or m a l power
cyclin g pr eca u t ion s by wa it in g a m in im u m of five
secon ds befor e a ddin g power a ga in .
Th is will r eset t h e SCSI IDs t o a defa u lt set t in g t h a t
pr even t s a SCSI ID con flict u n der n or m a l con dit ion s,
r efer t o “Defa u lt Con figu r a t ion s” la t er in t h is
sect ion .
14 P ower u p you r com pu t er syst em a n d r u n t h e
con figu r a t ion pr ogr a m .
Th is com plet es t h e set u p a n d con figu r a t ion .
Two Dual-Bus Cabinets
Wit h t h is con figu r a t ion you will h a ve u p t o eigh t (8)
disk dr ives per con t r oller ch a n n el. If you u se m u lt iple
differ en t ia l h ost a da pt er s you ca n fu r t h er expa n d you r
ca pa cit y.
1 P ower off you r com pu t er syst em or wor k st a t ion .
2 Be su r e t o com plet e t h e “Set u p” a n d “Com pon en t
In st a lla t ion ” sect ion s ea r lier in t h is Gu ide. Th e DE U
sh ips fr om t h e fa ct or y wit h I/O In t er fa ce ca r ds
in st a lled in bot h ca r d slot s. Th er efor e du r in g t h e
in st a lla t ion , you m a y be r equ ir ed t o r em ove on e or
bot h I/O In t er fa ce ca r ds.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
3 Iden t ify wh ich su bsyst em will be t h e m a st er ca bin et .
Loosen t h e t wo t h u m b scr ews a n d r em ove t h e I/O
In t er fa ce ca r d in st a lled in t h e u pper or r igh t
sideca r d slot of t h e m a st er ca bin et .
Differential Converter
Option Card
Master Cabinet
I/O Interface Card
4 In st a ll a Differ en t ia l Con ver t er F ea t u r e ca r d in t o
t h e u pper or r igh t side ca r d slot in t h e m a st er
ca bin et a n d t igh t en t h e t h u m b scr ews.
5 Loosen t h e t wo t h u m b scr ews a n d r em ove t h e I/O
In t er fa ce ca r d in t h e lower or left side ca r d slot in
t h e sla ve #1 ca bin et .
I/O Interface Card
Master Cabinet
Ultra Extender
Option Card
6 In st a ll a t wo-ch a n n el U lt r a E xt en der Opt ion ca r d
in t o t h e lower or left side ca r d slot in t h e sla ve #1
ca bin et a n d t igh t en t h e t h u m b scr ews.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
TOP Master
Chl #1
TOP Slave #1
Chl #0
Chl #0
Chl #1
2-CH Differential
I/O Interface Card
SAF-TE Card
Converter Card
SAF-TE Card
2-CH Ultra
I/O Interface Card
Extender Card
Chl #1
Chl #0
Chl #0
Chl #1
Chl #1
Chl #0
1 meter Ultra Wide SCSI Jumper
1 meter Ultra Wide SCSI Jumper
Chl #1
Chl #21
Differential SCSI
Host Adapter
Host Computer #1
Available Drive
Unavailable Drive
7 Con n ect on e en d of a 25 m et er da t a ca ble t o t h e
Ch a n n el #1 con n ect or on t h e differ en t ia l h ost
a da pt er .
8 Con n ect t h e ot h er en d of t h e da t a ca ble t o t h e
Ch a n n el 1 con n ect or on t h e u pper or r igh t side t wo-
ch a n n el Differ en t ia l Con ver t er Opt ion ca r d in st a lled
in t h e “m a st er ” ca bin et .
9 Con n ect on e en d of a 1 m et er ju m per ca ble t o t h e
Ch a n n el 0 con n ect or on t h e lower or left side I/O
In t er fa ce ca r d in t h e “m a st er ” ca bin et .
10 Con n ect t h e ot h er en d of t h e 1 m et er ju m per ca ble t o
t h e Ch a n n el 0 con n ect or on t h e lower or left side
t wo-ch a n n el U lt r a E xt en der Opt ion ca r d in st a lled in
t h e “sla ve #1” ca bin et .
11 Con n ect on e en d of a secon d 25 m et er da t a ca ble t o
t h e Ch a n n el #2 con n ect or on t h e differ en t ia l h ost
a da pt er .
12 Con n ect t h e ot h er en d of t h a t da t a ca ble t o t h e
Ch a n n el 0 con n ect or on t h e u pper or r igh t side 2-
ch a n n el Differ en t ia l Con ver t er Opt ion ca r d in t h e
“m a st er ” ca bin et .
13 Con n ect on e en d of a secon d 1 m et er ju m per ca ble t o
t h e Ch a n n el 1 con n ect or on t h e lower or left side I/O
In t er fa ce ca r d in t h e “m a st er ” ca bin et .
14 Con n ect t h e ot h er en d of t h e secon d 1 m et er ju m per
ca ble t o t h e Ch a n n el 1 con n ect or on t h e lower or left
side t wo-ch a n n el U lt r a E xt en der Opt ion ca r d
in st a lled in t h e “sla ve #1” ca bin et .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
N o t e : SCSI t er m in a t ion is a u t om a t ic a n d r equ ir es n o
u ser con figu r a t ion .
15 Tu r n on t h e power t o t h e DE U . Aft er t h e power -on
self-t est h a s com plet ed, H DD St a t u s a n d Ch a n n el
Mode LE Ds will be solid gr een .
16 Access t h e Opt ion s m en u on t h e Oper a t or Con t r ol
P a n el a n d ch oose t h e SAF TE CH AIN ID select ion .
Refer t o “SAF TE CH AIN ID” ea r lier in t h is Gu ide.
17 Aft er set t in g t h e ca bin et iden t ifica t ion s you m u st
power cycle t h e su bsyst em s. Obser ve n or m a l power
cyclin g pr eca u t ion s by wa it in g a m in im u m of five
secon ds befor e a ddin g power a ga in .
Th is will r eset t h e SCSI IDs t o a defa u lt set t in g t h a t
pr even t s a SCSI ID con flict u n der n or m a l con dit ion s,
r efer t o “Defa u lt Con figu r a t ion s” la t er in t h is
sect ion .
18 P ower u p you r com pu t er syst em a n d r u n t h e
con figu r a t ion pr ogr a m .
Th is com plet es t h e set u p a n d con figu r a t ion .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
One Dual-Bus Cabinet and Two Single-Bus Cabinets
Wit h t h is con figu r a t ion you ca n cr ea t e a n a r r a y t h a t
con t a in s t welve (12) dr ives per ch a n n el on a
differ en t ia l h ost a da pt er . If you a r e u sin g m u lt iple
differ en t ia l h ost a da pt er s you ca n fu r t h er expa n d you r
ca pa cit y.
1 P ower off you r com pu t er syst em or wor k st a t ion .
2 Be su r e t o com plet e t h e “Set u p” a n d “Com pon en t
In st a lla t ion ” sect ion s descr ibed ea r lier in t h is Gu ide.
Th e DE U sh ips fr om t h e fa ct or y wit h I/O In t er fa ce
ca r ds in st a lled in bot h ca r d slot s.
C a u t i o n : E xer cise ca r e wh en h a n dlin g a n y elect r ica l
com pon en t s.
3 Iden t ify wh ich su bsyst em will be t h e m a st er ca bin et .
Loosen t h e t wo t h u m b scr ews a n d r em ove t h e I/O
In t er fa ce ca r d on t h e lower or left side ca r d slot .
I/O Interface Card
Slave Cabinet
Ultra Extender
Option Card
4 In st a ll a n U lt r a E xt en der Opt ion ca r d in t o t h e lower
or left side ca r d slot a n d t igh t en t h e t h u m b scr ews.
Th e ca r d is k eyed a n d will in st a ll on ly on e wa y,
com pon en t side u p or t o t h e r igh t . Do n ot
over t igh t en t h e t h u m b scr ews.
5 Iden t ify wh ich su bsyst em will be t h e Sla ve #1
ca bin et . Loosen t h e t wo t h u m b scr ews a n d r em ove
t h e I/O In t er fa ce ca r d on t h e u pper or r igh t side ca r d
slot .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
6 In st a ll a t wo-ch a n n el U lt r a E xt en der Opt ion ca r d
in t o t h e u pper or r igh t side ca r d slot a n d t igh t en t h e
t h u m b scr ews.
Ultra Extender
Option Card
I/O Interface Card
7 Repea t st eps 5 a n d 6 for t h e secon d (Sla ve #2)
ca bin et .
1 meter Ultra Wide SCSI Jumper
1 meter Ultra Wide SCSI Jumper
TOP Slave #1
Chl #0
TOP Slave #2
Chl #0
TOP Master
Chl #0
Chl #1
Chl #1
Chl #1
1-CH Ultra
I/O Interface Card
SAF-TE Card
Extender Card
SAF-TE Card
1-CH Ultra
Extender Card
SAF-TE Card
I/O Interface Card
Chl #0
I/O Interface Card
Differential SCSI
Data Cable (25 meters)
Chl #0
Chl #1
Chl #1
Chl #0
Chl #1
2-CH Differential
Converter Card
Chl #1
Differential SCSI
Host Adapter
Chl #2
Host Computer #1
Differential SCSI Data Cable (25 meters)
N o t e : Secu r e t h e ca ble con n ect or s u sin g t h e t h u m b
scr ews (fin ger t igh t on ly).
8 Con n ect on e en d of a 25 m et er da t a ca ble t o t h e
Ch a n n el #1 con n ect or on t h e differ en t ia l h ost
a da pt er .
9 Con n ect t h e ot h er en d of t h e da t a ca ble t o t h e
Ch a n n el 0 con n ect or on t h e lower or left side 2-
ch a n n el Differ en t ia l Con ver t er ca r d in st a lled in t h e
m a st er ca bin et .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
10 Con n ect on e en d of a 1 m et er ju m per ca ble t o t h e
Ch a n n el 0 con n ect or on t h e u pper or r igh t side I/O
In t er fa ce ca r d in t h e m a st er ca bin et .
11 Con n ect t h e ot h er en d of t h e 1 m et er ju m per ca ble t o
t h e Ch a n n el 1 con n ect or on t h e u pper or r igh t side
1-ch a n n el U lt r a E xt en der ca r d in st a lled in t h e sla ve
#2 ca bin et .
12 Con n ect on e en d of t h e secon d 25 m et er da t a ca ble t o
t h e Ch a n n el #2 con n ect or on t h e differ en t ia l h ost
a da pt er .
13 Con n ect t h e ot h er en d of t h e da t a ca ble t o t h e
Ch a n n el 1 con n ect or on t h e lower or left side 2-
ch a n n el Differ en t ia l Con ver t er ca r d.
14 Con n ect on e en d of a secon d 1 m et er ju m per ca ble t o
t h e Ch a n n el 1 con n ect or on t h e u pper or r igh t side
I/O In t er fa ce ca r d in t h e m a st er ca bin et .
15 Con n ect t h e ot h er en d of t h e secon d 1 m et er ju m per
ca ble t o t h e Ch a n n el 1 con n ect or on t h e u pper or
r igh t side 1-ch a n n el U lt r a E xt en der ca r d in st a lled in
t h e sla ve #1 ca bin et .
N o t e : SCSI t er m in a t ion is a u t om a t ic a n d r equ ir es n o
u ser con figu r a t ion .
16 Tu r n on t h e power t o t h e DE U .
17 Aft er t h e power -on self-t est h a s com plet ed, H DD
St a t u s a n d Ch a n n el Mode LE Ds will be solid gr een .
18 Access t h e Opt ion s m en u on t h e Oper a t or Con t r ol
P a n el a n d ch oose t h e SAF TE CH AIN ID select ion .
Refer t o “SAF TE CH AIN ID” ea r lier in t h is Gu ide.
19 Aft er set t in g t h e ca bin et iden t ifica t ion s you m u st
power cycle t h e su bsyst em s. Obser ve n or m a l power
cyclin g pr eca u t ion s by wa it in g a m in im u m of five
secon ds befor e a ddin g power a ga in .
Th is will r eset t h e SCSI IDs t o a defa u lt set t in g t h a t
pr even t s a SCSI ID con flict u n der n or m a l con dit ion s,
r efer t o “Defa u lt Con figu r a t ion s” la t er in t h is
sect ion .
20 P ower u p you r com pu t er syst em a n d r u n t h e
con figu r a t ion pr ogr a m .
Th is com plet es t h e set u p a n d con figu r a t ion .
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Default Configurations
Th e followin g t a ble pr ovides t h e defa u lt SCSI ID
set t in gs t h a t will be set by su bsyst em pr ocessor wh en a
specific con figu r a t ion is ch osen in t h e OCP Men u
opt ion SAF TE CH AIN ID set t in g.
Master
Master
Slave 1
Slave 1
Cabinet -
Dual-Bus
Mode
Slave 2
Slave 2
Cabinet -
Dual-Bus
Mode
Cabinet -
Single-Bus
Mode
Cabinet -
Dual-Bus
Mode
Cabinet -
Single-Bus
Mode
Cabinet -
Single-Bus
Mode
9
8
6
5
4
2
1
0
13
12
11
10
9
8
6
5
13
12
11
10
13
12
11
10
Upper
Bay
4
2
1
0
4
2
1
0
9
8
6
5
9
8
6
5
9
8
6
5
13
12
11
10
Lower
Bay
Wh en t wo sin gle-bu s ca bin et s a r e in st a lled a s a Ma st er
a n d a Sla ve syst em , t wo dr ive slot s will be u n a va ila ble
t o t h e con t r oller . U n der t h is con dit ion you will be
r equ ir ed t o m a n u a lly con figu r e t h ese IDs set t in g. Th e
t wo u pper ba y disk dr ive slot s on t h e Sla ve syst em
sh ou ld be set wit h t h e ID set t in g of “XX.” Th ese t wo
dr ive slot s will t h en be t a k en off bu s.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Option Card Specifications
DEU Ultra Extender Option Card
Operating Environment
Relative Humidity
Power Requirements
Dimensions (HxW)
Weight
40°F to 104°F (+5°C to +40°C)
5 - 95% (non-condensing)
+5VDC, 2.0 A
10.5" x 5.5"
2 lbs.
Altitude
-200 to 6,500 feet
Up to 40 MB/sec
Automatic Termination
Interface Transfer Rate
Termination
DEU Differential Converter Option Card
Operating Environment
Relative Humidity
Power Requirements
Dimensions (HxW)
Weight
40°F to 104°F (+5°C to +40°C)
5 - 95% (non-condensing)
+5VDC, 5.5 A
10.5" x 5.5"
2 lbs.
Altitude
-200 to 6,500 feet
Up to 40 MB/sec
Automatic Termination
Interface Transfer Rate
Termination
Index
A
Activity LEDs, 8
Animated Icon, 39
B
Backplane, 77
C
Cables, 27
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Cabling Configuration, 25
DEU, 89
Change Passcode, 50
Channel Mode LED, 6
Component Installation, 21
Component Status, 42
Components
Activity LEDs, 8
Channel Mode LED, 6
Configuration Modules, 15
Cooling Fans, 13
Door Lock, 7
Fan Status LED, 6
Hot Swappable Disk Drives, 12
I/O Interface Card, 10
Operator Control Panel, 4
Power Cord Connector, 10
Power Supply Status LED, 6
Power Switch, 12
Power-On LED, 5
SAF-TE, 16
SAF-TE Card, 13
Configuration Info, 43
Cooling Fans
Hot Swappable, 13
Replacement, 56
D
DC Good LED, 55
DEU Cabinet
Replacement, 58
DEU Subsystem Installations, 88
Differential Converter
Interface Transfer Rate, 118
Operating Environment, 118
Power Requirements, 118
Two Dual-Bus Cabinets, 109
Two Single-Bus Cabinets, 105
Weight, 118
Differential Converter Card, 43
Differential Ultra Wide SCSI, 105
Dimensions, 73
Door Lock, 7
Drive Latching Clips, 21
Drive Replacement, 53
Dual-Bus Module (Single Cabinet), 28
E
EMC, 74
EMI, 73
Environment
master/slave, 88
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
F
Fan Status LED, 6
Fast SCSI, 25
Fast Wide SCSI, 25
Fast-20, 25
Features, 86
Firmware information, 43
Fuse, 10
Replacement, 59
Fuse type, 60
G
Glossary
Disk Mirroring, 69
Disk Spanning, 69
Disk Striping, 69
Duplexing, 69
Fault-Tolerant, 70
RAID, 70
H
Handle assembly, 20
Hardware Menu, 41
Heat Threshold, 48
Hot Spare, 70
Hot Swappable Disk Drives, 12
I
I/ O Interface Card, 10
Installing
Third Power Supply, 24
Interface Transfer Rate, 73
Internal Temp, 45
J
J15, 83
J17, 83
JP2, 78
JP3, 79
JP4, 80
JP5, 82
Jumpers, 77
L
LED
Channel Mode, 6
Descriptions, 36
Fan Status, 6
Power Supply Status, 6
Logical Drive, 70
M
Manual ID Selection, 46
Mapping, 70
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Master/ slave, 88
Mirroring, 70
N
NVRAM, 33
O
OB (Off Bus), 46
OCP, 37
Operating Environment, 73
Operator Control Panel, 4, 37
Option Cards, 85
Options Menu, 45
Other Configurations, 32
P
Passcode, 50
Physical Drive, 70
POST, 33
POST Results, 44
Power Cord Connector, 10
Power Requirements, 73
Power Supplies, 14
Power Supply
Replacement, 54
Status LED, 6
Power Switch, 12
Power-On LED, 5
R
Rack-Mount Subsystem Assembly, 19
RAM Checksum Failure, 34
Rebuild, 71
Register Read/ Write Failure, 34
Remote/ Delay Start, 2
Replacing a Drive, 53
Replacing a Fuse, 59
Replacing a Power Supply, 54
Replacing the Cooling Fans, 56
Replacing the DEU Cabinet, 58
ROM Checksum, 34
Rules
DEU, 88
S
S2S Interface, 43
SAF-TE, 71
SAFTE CHAIN ID, 49
SCSI Access, 33
SCSI Accessed Fault-Tolerant Enclosure, 16
SCSI Bus Access Failure, 35
SCSI cable length
limits, 27
SCSI ID Menu, 46
SCSI-3 ANSI, 89
Self Test, 33
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
Set Lower Slot IDs, 46
Set Upper Slot IDs, 46
Setup
DEU Installation, 17
DEU Subsystem Installations, 88
Shock, 74
Single-Bus module, 21
Single-Bus Module (Single Cabinet), 30
Specifications, 73, 118
Startup Screens, 38
Status LEDs, 7
Stripe Order, 71
Stripe Width, 71
Striping, 71
System Status Icon, 39
T
Technical Information, 73
Termination, 26
Testing ROM, 33
Third Power Supply, 24
TolerANT technology, 85
Troubleshooting
Fails to Turn On, 61
LEDs Not Functioning, 62, 63
U
Ultra Extender
Interface Transfer Rate, 118
Operating Environment, 118
Power Requirements, 118
Two Single-Bus Cabinets, 93
Weight, 118
Ultra Extender Card, 43
DEU, 93
Ultra SCSI
Dual-Bus Module (Single Cabinet), 28
Fast 20, 25
Ultra Wide SCSI mode, 25
V
VDH SCSI connectors, 75
Vibration, 74
W
Weight, 73
Where to Find Answers, 3
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
102157
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
|