6. CONT. / SINGLE BUTTON
Press this button to switch the single and continues play mode.The select mode is indicated on the
LCD.In SINGLE mode, after each track,the unit pauses the beginning of the next track in
continues mode,the unit plays all tracks.
7. PROG BUTTON
In STOP mode, you can program several tracks (20 tracks max):
- Press the STOP button to enter in the stop mode
- Press the PROG button to enter in the program mode
- Use the skip track buttons to choose the track you want to listen then press the prog button to
enter you choice.
- Use one more time the skip track buttons to choose the track you want to listen then press the
PROG button to enter you choice.
- Repeat the operation to select all the track you want to listen
- Press the PLAY / PAUSE button to start the playback
8. OUT BUTTON ( LOOP BUTTON )
When you press this button, you set the end point of the seamless loop and you start the loop. To
finish the loop, press again this button.
9. TRACK SELECT BUTTONS
Pressing 0-9 buttons allows you direct access to select tracks from the CD。
10. RELOOP BUTTON ( LOOP SYSTEM )
This button is used to start the last saved loop. To finish the loop, press the reloop button.
11. SKIP I<< BUTTON
This button selects the last track to be played。
12. CUE BUTTON
The CUE function allows the CD to be played from the memorized point any numbers of times,
with the unit in pause mode. Press the CUE button to set up the memorized CUE point and then
the CUE button blinks.
13. +10 BUTTON
Use this button to forward 10 tracks in one press.
14. PLAY / PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from
pause to play.
15. SKIP >>I BUTTON
Use this button to select the next track to be played
16. PITCH CONTROL
Use this control slider to increase or decrease the speed playback。
17. PITCH BEND +/- BUTTON
When each of the two CD Players is Playing,the pitch bend function allows the position of the
BASS beat to be matched after the pitch has been adjusted。
18. PITCH BUTTON
If you push this button, the adjustment of the pitch control is available。
19. DISPLAY
This LCD Display indicates track Numbers,Time,Remain,pitch,Single,Continue and Time Bar。.
20. DISC-TRAY
To enter the disc, please refer to the explanations under 6.2 CD-tray.
3
21. OPEN/CLOSE BUTTON
The Disc Is placed on this tray pressing the Disc tray open/close buttons will open or close the tray
22. SEARCH BUTTON
Pressed the button to switch the function of jog dial between SEARCH and PITCH BEND, when
the indicator LED is light, dial the jog for quick search forward and backward, when the indicator
LED is off, dial the jog for pitch bend function, lf the jog is unmoved for 8 seconds, the indicator is
off, and the jog is for pitch bend function.
Connection :
23. LINE OUT 1-2
The audio for each CD player is output from these jacks. Connect to the line input of the mixer.
24. AC INPUT CONNECTTING POWER
Use this selector to choose the good power supply. (Several countries have another power supply)
25. AC CORD
Connect the power cord into an AC wall outlet with the proper AC voltage
26. CONNECTOR PORTS
The 8 PIN Termination permits the connection the control unit to the main unit
4
WARRANTY CONDITIONS
PLYE PRO equipment is covered by a 1-year warranty on parts and labor except for Crossfaders (90
days).
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by PLYE PRO are allowed to work on the equipment. Warranty becomes
void when other service technicians open the equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
PLYE PRO will return the goods by pre-paid mail during the first year of warranty; thereafter the
mailing cost is to be paid by the recipient
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal
use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
SPECIFICATIONS:
Anti-Shock Buffer Memory:
Range of adjustments:
Power supply:
40 seconds
+/- 16%
~115 / 230V, 50/60Hz,
Player : 482x90x255mm
Controller : 482x132x80mm
Dimensions :
5
6
|