Nokia N79 User Guide
Issue 1
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY
LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITEDTO, THE IMPLIED WARRANTIESOF MERCHANTABILITY AND FITNESS FOR A PARTICULARPURPOSE, ARE MADEIN RELATION
TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME
WITHOUT PRIOR NOTICE.
Reverse engineering of any software in the Nokia device is prohibited to the extent permitted by applicable law. Insofar as this user guide contains
any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties,
damages and liabilities of Nokia's licensors.
The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for
details, and availability of language options.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion
contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry
Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service
facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or
modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
Issue 1
Contents
Safety.........................................................10 Your device.................................................25
About your device.........................................................10 Welcome........................................................................25
Network services...........................................................11 Nokia Switch..................................................................25
Transfer content.........................................................25
Get started.................................................13
Synchronise, retrieve, or send content....................26
Keys and parts (front)...................................................13 Display indicators..........................................................27
Keys and parts (back and sides)..................................14 Shortcuts........................................................................29
Insert SIM card and battery..........................................14 Lock the keypad............................................................29
Switch the device on.....................................................15 Navi™ wheel..................................................................29
Charge the battery........................................................16 Multimedia menu..........................................................30
Attach wrist strap..........................................................16 Mobile Search................................................................31
Antenna locations.........................................................16 Headset..........................................................................32
Volume and loudspeaker control................................32
Get connected............................................18
Offline profile.................................................................33
Fast downloading.........................................................34
Instructions inside - In-device help.............................19
Get started.....................................................................19 Browse the web............................................................35
Nokia support and contact information.....................19 Browser toolbar............................................................37
Additional applications................................................20 Navigate pages..............................................................37
Software updates..........................................................20 Web feeds and blogs....................................................37
Application Update.......................................................21 Widgets..........................................................................38
Settings..........................................................................21 Content search...............................................................38
Access codes..................................................................21 Download and purchase items....................................38
Prolong battery life.......................................................22 Bookmarks.....................................................................39
Free memory.................................................................23 Empty the cache............................................................40
End the connection.......................................................40
Connection security......................................................40 Modify the standby mode............................................55
Web settings..................................................................41 Modify the main menu.................................................56
Connections................................................43 Positioning (GPS)........................................57
Wireless LAN..................................................................43 About GPS.......................................................................57
About WLAN................................................................43 Assisted GPS (A-GPS).....................................................58
WLAN connections......................................................43 Hold your device correctly............................................58
WLAN wizard...............................................................44 Tips on creating a GPS connection..............................59
WLAN internet access points.....................................45 Position requests..........................................................59
Operating modes........................................................45 Landmarks.....................................................................60
Connection manager....................................................45 GPS data.........................................................................60
Active data connections.............................................45
Available WLAN networks..........................................46
Bluetooth connectivity.................................................46
About Bluetooth connectivity...................................46
Settings.......................................................................47
Route guidance..........................................................61
Retrieve position information..................................61
Trip meter...................................................................62
Maps...........................................................63
Security tips................................................................47 About Maps....................................................................63
Send data using Bluetooth connectivity..................47 Browse maps.................................................................64
Pair devices.................................................................48 Download maps............................................................65
Receive data using Bluetooth connectivity.............49 Find a place....................................................................66
Block devices...............................................................49 Extra services for Maps.................................................67
Remote SIM mode......................................................49
USB..................................................................................50
PC connections..............................................................51
Navigation...................................................................68
Traffic information.....................................................69
Guides..........................................................................70
Personalise your device.............................52 Music folder................................................71
Change the look of your device...................................52 Music player...................................................................71
Changeable back cover.................................................53
Audio themes................................................................53
Set tones in Profiles......................................................54
3-D tones........................................................................54
Play a song or a podcast episode.............................71
Music menu.................................................................72
Playlists.......................................................................72
Podcasts......................................................................73
Contents
Home network with music player............................73 Image capture...............................................................88
Transfer music to your device...................................74
Transfer music from PC...........................................74
Transfer with Windows Media Player....................75
Nokia Music Store..........................................................76
FM transmitter...............................................................76
About the FM transmitter..........................................76
Play a song using FM transmitter.............................77
FM transmitter settings.............................................77
Nokia Podcasting..........................................................78
Podcasting settings....................................................78
Still image camera indicators...................................88
Active toolbar.............................................................88
Capture images...........................................................89
Location information.................................................90
After taking a picture.................................................90
Flash.............................................................................91
Scenes..........................................................................91
Capture images in a sequence..................................92
You in the picture—self-timer..................................92
Tips on taking good photographs............................93
Search podcasts..........................................................79 Video recording.............................................................94
Directories...................................................................79
Downloads..................................................................80
Play and manage podcasts........................................80
Video capture indicators...........................................94
Record videos.............................................................94
After recording a video..............................................95
Radio applications........................................................81 Camera settings.............................................................95
FM radio ......................................................................81
Listen to the radio...................................................82
FM radio settings.....................................................83
Still image camera settings.......................................96
Colour and lighting settings......................................96
Video settings.............................................................97
Nokia Internet Radio..................................................83 About Photos.................................................................99
Listen to internet radio stations............................84 View images and videos...............................................99
Favourite stations....................................................84 View and edit file details...........................................100
Search for stations...................................................85 Organise images and videos......................................101
Station directory......................................................85 Active toolbar..............................................................101
Internet radio settings............................................85 Albums.........................................................................101
Tags..............................................................................102
Camera.......................................................87
Slide show....................................................................102
About the camera.........................................................87 TV-out mode................................................................103
Activate the camera......................................................87 Edit images..................................................................104
Image editor.............................................................104
Crop image................................................................104
Reduce red-eye.........................................................104
Useful shortcuts........................................................105
Edit videos...................................................................105
Print images................................................................105
Image print...............................................................105
Printer selection....................................................106
Print preview.........................................................106
Print settings.........................................................106
Print online...............................................................106
Share images and videos online ..............................107
Nokia Video Centre..................................116
View and download video clips.................................116
Video feeds..................................................................117
My videos.....................................................................118
Transfer videos from your PC.....................................118
Video centre settings..................................................118
N-Gage......................................................120
About N-Gage..............................................................120
N-Gage views...............................................................120
Get started...................................................................121
Create a player name...............................................121
Start a game.............................................................122
Track your progress.................................................122
Play with friends......................................................122
Play and manage games............................................122
Edit profile details.......................................................123
Connect with other players........................................123
Find and add friends................................................123
Rate a player.............................................................124
Send messages.........................................................124
N-Gage settings...........................................................125
Gallery......................................................108
Main view.....................................................................108
Sounds..........................................................................108
Streaming links...........................................................109
Presentations..............................................................109
Important security information................................111
Settings for home network........................................111
Set sharing on and define content............................112
View and share media files........................................113
Copy media files..........................................................114
Home synchronisation................................................114
Synchronise media files...........................................114
Synchronisation settings.........................................114
Define incoming files...............................................115
Define outgoing files...............................................115
Messaging................................................126
Messaging main view.................................................126
Write text.....................................................................127
Traditional text input..............................................127
Predictive text input................................................127
Tips on text input.....................................................128
Contents
Change the writing language.................................128 Voice and video mailboxes........................................141
Edit text and lists......................................................128 Answer or decline a call.............................................141
Write and send messages..........................................129 Make a conference call...............................................141
Messaging inbox.........................................................131 Speed dial a phone number.......................................142
Receive messages....................................................131 Call waiting..................................................................142
Multimedia messages..............................................131 Voice dialling...............................................................143
Data, settings, and web service messages............131 Make a video call.........................................................143
Message reader...........................................................132 Options during a video call........................................144
Mailbox.........................................................................132 Answer or decline a video call...................................145
Define the e-mail settings.......................................132 Video sharing..............................................................145
Open the mailbox.....................................................132
Retrieve e-mail messages.......................................133
Delete e-mail messages...........................................134
Disconnect from the mailbox..................................134
Video sharing requirements...................................145
Settings.....................................................................146
Share live video or video clips................................147
Accept an invitation.................................................148
View messages on a SIM card....................................134 Log................................................................................148
Messaging settings.....................................................134
Text message settings.............................................135
Multimedia message settings.................................135
Connection settings..............................................136
Recent calls...............................................................148
Call duration.............................................................148
Packet data...............................................................149
Monitor all communication events........................149
User settings..........................................................137 About internet calls....................................................150
Retrieval settings..................................................138 Activate internet calls.................................................150
Automatic retrieval settings................................138 Make internet calls .....................................................150
Web service message settings................................138 Blocked contacts.........................................................151
Cell broadcast settings.............................................139 Manage internet call services....................................151
Other settings...........................................................139 Internet call settings..................................................151
Make calls.................................................140 Contacts (phonebook)..............................153
Voice calls ...................................................................140 Save and edit names and numbers...........................153
Options during a call...................................................140 Manage names and numbers....................................153
Default numbers and addresses................................153
Quickmanager..........................................................165
Add ringing tones for contacts..................................154 Notes............................................................................165
Copy contacts..............................................................154 Adobe reader...............................................................165
SIM services..................................................................155 Converter.....................................................................166
SIM contacts..............................................................155 Zip manager................................................................166
Fixed dialling............................................................155
Applications folder...................................168
Calculator.....................................................................168
Application manager..................................................168
Install applications and software ..........................169
Remove applications and software........................170
Settings.....................................................................171
Manage contact groups..............................................155
Media folder.............................................157
RealPlayer ...................................................................157
Play video clips.........................................................157
Stream content over the air....................................157
RealPlayer settings...................................................158
Adobe Flash Player......................................................158
Tools folder..............................................172
Licences........................................................................158 File manager................................................................172
Recorder.......................................................................160
About File manager..................................................172
Find and organise files............................................172
Edit memory card.....................................................172
Back up files on a memory card..............................172
Time management...................................161
Clock ............................................................................161
Alarm clock................................................................161 Voice commands.........................................................173
World clock...............................................................161 Sync..............................................................................173
Calendar.......................................................................162 Device manager..........................................................174
Create a calendar entry............................................162 Speech .........................................................................174
Calendar views.........................................................162
Settings....................................................176
General settings..........................................................176
Personalisation settings..........................................176
Enhancement settings.............................................177
Navi wheel settings.................................................178
Sensor settings.........................................................178
Security settings.......................................................179
Manage calendar entries.........................................163
Office folder..............................................164
Quickoffice...................................................................164
Quickword.................................................................164
Quicksheet................................................................164
Quickpoint.................................................................165
Contents
Phone and SIM.......................................................179 Battery and charger information..............................198
Certificate management.......................................180 Nokia battery authentication guidelines.................199
Security module.....................................................181
Restore original settings.........................................181
Positioning settings.................................................182
Phone settings............................................................182
Call settings...............................................................182
Call divert..................................................................183
Authenticate hologram...........................................200
What if your battery is not authentic?...................200
Care and maintenance.............................201
Additional safety information.................203
Call barring................................................................184 Small children..............................................................203
Network settings......................................................184 Operating environment..............................................203
Connection settings....................................................185 Medical devices...........................................................203
Data connections and access points......................185
Access points............................................................186
Implanted medical devices.....................................204
Hearing aids..............................................................204
Create a new access point....................................186 Vehicles........................................................................204
Create access point groups...................................186 Potentially explosive environments.........................205
Packet data access points.....................................187 Emergency calls...........................................................205
WLAN internet access points................................188 CERTIFICATION INFORMATION (SAR)...........................206
Packet data settings................................................189
Index........................................................208
Configurations..........................................................190
Access point name control......................................190
Application settings....................................................191
Troubleshooting......................................192
Nokia original enhancements.................196
Enhancements.............................................................196
Battery..........................................................................196
Battery and charger information.............198
Safety
QUALIFIED SERVICE
Read these simple guidelines. Not following them
maybe dangerous or illegal. Readthe completeuser
guide for further information.
Only qualified personnel may install or
repair this product.
ENHANCEMENTS AND BATTERIES
SWITCH ON SAFELY
Do not switch the device on when wireless
phone use is prohibited or when it may
cause interference or danger.
Use only approved enhancements and
batteries. Do not connect incompatible
products.
ROAD SAFETY COMES FIRST
ENHANCEMENTS
Obey all local laws. Always keep your hands
free to operate the vehicle while driving.
Your first consideration while driving should
be road safety.
Use only approved enhancements. Do not
connect incompatible products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect
performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off
in aircraft, near medical equipment, fuel,
chemicals, or blasting areas.
dry.
About your device
The wireless device described in this guide is approved
for use on the (E)GSM 850, 900, 1800,1900, and UMTS
900, 2100 MHz networks. Contact your service provider
for more information about networks.
10
Safety
When using the features in this device, obey all laws
and respect local customs, privacy and legitimate
rights of others, including copyrights.
Copyright protection may prevent some images, music,
and other content from being copied, modified, or
transferred.
Warning: To use any features in this device,
other than the alarm clock, the device must be
switched on. Do not switch the device on when
wireless device use may cause interference or danger.
The office applications support common features of
Microsoft Word, PowerPoint, and Excel (Microsoft Office
2000, XP, and 2003). Not all file formats can be viewed
or modified.
Remember to make back-up copies or keep a written
record of all important information stored in your
device.
Your device supports several methods of connectivity.
Like computers, your device may be exposed to viruses
and other harmful content. Exercise caution with
messages, connectivity requests, browsing, and
downloads. Only install and use services and other
software from trustworthy sources that offer adequate
security and protection against harmful software, such
as applications that are Symbian Signed or have passed
the Java Verified™ testing. Consider installing antivirus
and other security software on your device and any
connected computer.
Your device may have preinstalled bookmarks and links
for third-party internet sites. You may also access other
third-party sites through your device. Third-party sites
are not affiliated with Nokia, and Nokia does not
endorse or assume liability for them. If you choose to
access such sites, you should take precautions for
security or content.
When connecting to any other device, read its user
guide for detailed safety instructions. Do not connect
incompatible products.
The images in this guide may differ from your device
display.
Network services
To use the device you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on
all networks; other networks may require that you
make specific arrangements with your service provider
before you can use the network services. Using
11
Safety
network services involves transmission of data. Check
with your service provider for details about fees in your
home network and when roaming on other networks.
Your service provider can give you instructions and
explain what charges will apply. Some networks may
have limitations that affect how you can use network
services. For instance, some networks may not support
all language-dependent characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If
so, these features will not appear on your device menu.
Your device may also have a special configuration such
as changes in menu names, menu order, and icons.
Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this
device, such as MMS, web browsing, and e-mail, require
network support for these technologies.
12
Get started
2 — Nokia AV Connector for compatible headsets
and headphones
1 and 9 — Stereo speaker with 3-D sound effect
2 — Zoom/Volume key
3 — Key lock switch for locking and unlocking the
3 — 2-stage capture key for auto-focus, still image
keys
capture, and video recording
4 — Flash and video light
Keys and parts (back and
sides)
5 — Main camera for high resolution (up to 5
megapixels) image capture and video recording
6 — Memory card slot for a compatible microSD card
and Micro USB connector to connect to a compatible
PC
7 — Charger connector
8 — Hole for a wrist strap
Insert SIM card and battery
Always switch the device off and disconnect the
charger before removing the battery.
14
Get started
1. With the back
of the device
facing you,
4. To replace the
cover, direct the
top locking
press and hold
the release
catch toward its
slot, and press
down until the
cover locks into
place.
button and lift
up the cover.
2. Insert the SIM
card into the
card holder.
Remove SIM card
To remove the SIM
Ensure that the
contact area on
the card is facing
down.
card, slide the latch to the direction of the arrow.
3. Insert the
battery.
Switch the device on
1. Press and hold the power key.
15
Get started
may take a while before the charging indicator
starts scrolling.
3. When the battery is fully charged, the charging
indicator stops scrolling. Disconnect the charger
from the device, then from the wall outlet.
2. If the device asks for a PIN
code or lock code, enter it,
and press the left
selection key. The factory
setting for the lock code is
12345. If you forget the
code and your device is
locked, your device will
require service and
Tip: Disconnect the charger from the wall
outlet when the charger is not in use. A
charger that is connected to the outlet
consumes power even when it is not
connected to the device.
additional charges may
apply. For more
information, contact a Nokia Care point or your
device dealer.
Attach wrist strap
1. Remove the back cover.
2. Thread a wrist strap, and tighten it.
3. Replace the cover.
Charge the battery
1. Connect a
compatible
charger to a
wall outlet.
2. Connect the
power cord to
the device. If
the battery is
completely
Antenna locations
antennas. As with any radio transmitting device,
Your device may have internal and external
discharged, it
16
Get started
avoid touching the antenna area unnecessarily
while the antenna is transmitting or receiving.
Contact with such an antenna affects the
communication quality and may cause the device to
operate at a higher power level than otherwise
needed and may reduce the battery life.
1 — Cellular antenna
2 — FM transmitter antenna
3 — Bluetooth and wireless LAN antenna, and GPS
receiver
17
● 2G and 3G networks
● Bluetooth connectivity — to transfer files and
connect to compatible enhancements. See
"Bluetooth connectivity", p. 46.
● Nokia AV connector (3.5 mm) — to connect to
compatible headsets, headphones, or home
stereo sets
● USB data cable — to connect to compatible
devices, such as printers and PCs. See
"USB", p. 50.
● Wireless LAN (WLAN) — to connect tothe internet
and WLAN enabled devices. See "Wireless
LAN", p. 43.
● GPS — to receive transmissions from GPS
satellites to measure your location. See
"Positioning (GPS)", p. 57.
● FM transmitter — to listen to songs in your device
through compatible FM receivers, such as car
radios or home stereosets. See"Playasongusing
FM transmitter", p. 77.
Your device supports the following connectivity
methods:
18
Find help
Tip: To place Help in the main menu, select
Tools > Utilities, highlight Help, and select
Options > Move to folder and the main
menu.
Instructions inside - In-
device help
Your device contains instructions to help you use it.
When an application is open, to access the help text
for the current view, select Options > Help. To
open help from the main menu, select Tools >
Utilities > Help, and the relevant application.
Get started
See the get started guide for keys and parts
information, instructions for setting up the device
and for other essential information.
You can find links to related topics at the end of the
help text. To make the instructions easier to read,
you can change the size of the text. If you click on
an underlined word, a short explanation is
Nokia support and contact
information
displayed. Help uses the following indicators:
shows a link to a related help topic.
shows a link
Check www.nokia-asia.com/support or your local
Nokia website for the latest guides, additional
information, downloads, and services related to
your Nokia product. You may also download free
configuration settings such as MMS, GPRS, e-mail,
and other services for your device model at
www.nokia-asia.com/phonesettings.
to the application being discussed. When you are
reading the instructions, to switch between help
and the application that is open in the background,
press and hold
).
, or select the application link
(
19
Find help
If you need to contact customer service, check the
list of local Nokia Care contact centres at
www.nokia-asia.com/contactus.
with Microsoft Windows 2000, XP, or Vista
operating system, broadband internet access, and
a compatible data cable to connect your device to
the PC.
For maintenance services, check your nearest Nokia
Care point at www.nokia-asia.com/repair.
Warning: If you install a software update,
you cannot use the device, even to make emergency
calls, until the installation is completed and the
device is restarted. Be sure to back up data before
accepting installation of an update.
Additional applications
There are various applications provided by Nokia
and different third-party software developers that
help you do more with your device. These
applications are explained in the guides that are
available on the product support pages of the Nokia
website.
The size of a software update is approximately 5-10
MB using your device and 100 MB using a PC.
The download and installation may take up to 20
minutes with Device manager and up to 30 minutes
with Nokia Software Updater.
To get moreinformationand todownloadtheNokia
Software Updater application, visit www.nokia-
asia.com/softwareupdate or your local Nokia
website.
Nokia mayproduce software updates thatoffer new
features, enhanced functions, and improved
performance. You may be able to request these
updates through the Nokia Software Updater PC
application. Software updates may not be available
for all products or their variants. Not all operators
may endorse the latest software versions available.
If software updates over the air are supported by
your network, you may also be able to request
updates through the device.
Your device may be able to periodically check for
new software updates with Nokia Software
To update the device software, you need the Nokia
Checker. Press
, and select Tools > SW
Software Updater application and a compatible PC
checker.
20
Find help
Tip: To check the software version in your
Settings
device, enter *#0000# in the standby mode.
Your device normallyhas MMS, GPRS, streaming, and
mobile internet settings automatically configured,
based on your network service provider
Application Update
information. You may have settings from your
service providers already installed in your device, or
you may receive or request the settings from the
network service providers as a special message.
You can change the general settings in your device,
such as language, standby mode, display, and
keypad lock settings. See "Settings", p. 176.
Press
, and select Applications > App.
update.
With Application Update, you can check the
available updates for applications and download
them to your device.
After updating your device software using
Application Update, the instructions in the user
guide or the helps may not be up to date.
Access codes
To download the available updates, select
Options > Start update.
If you forget any of the access codes, contact your
service provider.
To unmark updates, scroll to them, and press the
scroll key.
● Personal identificationnumber(PIN) code— This
code protects your SIM card against
To view informationon anupdate, selectOptions >
unauthorised use. The PIN code (4 to 8 digits) is
usually supplied with the SIM card. After three
consecutive incorrect PIN code entries, the code
is blocked, and you need the PUK code to unblock
it.
View details.
To change the settings, select Options >
Settings.
● UPIN code — This code may be supplied with the
USIM card. The USIM card is an enhanced version
21
Find help
of the SIM card and is supported by UMTS mobile
Prolong battery life
phones.
● PIN2 code — This code (4 to 8 digits) is supplied
with some SIM cards, and is required to access
some functions in your device.
Many features in your device increase the demand
on battery power and reduce the battery life time.
To save battery power, note the following:
● Lock code (also known as security code) — The
lock code helps you to protect your device
against unauthorised use. You can create and
change the code, and set the device to request
the code. Keep the new code secret and in a safe
place separate from your device. If you forget the
code and your device is locked, your device will
require service and additional charges may
apply. Formoreinformation, contacta Nokia Care
point or your device dealer.
● Features that use Bluetooth technology, or
allowing such features to run in the background
while using other features, increase the demand
on battery power. Turn Bluetooth technology off
when you do not need it.
● Features that use wireless LAN (WLAN), or
allowing such features to run in the background
while using other features, increase the demand
on battery power. WLAN on your Nokia device
switches off when you are not trying to connect,
not connected to an access point, or not scanning
for available networks. To further reduce battery
consumption, you can specify that your device
does not scan, or scans less often, for available
networks in the background.See "Wireless
LAN", p. 43. When Scan for networks is set to
Never, the WLAN availability icon is not shown
in the standby mode. However, you can still
manually scan for available WLAN networks and
connect to WLAN networks as usual.
● Personal unblocking key (PUK) code and PUK2
code — These codes (8 digits) are required to
change a blocked PIN code or PIN2 code,
respectively. If the codes are not supplied with
the SIM card, contact the operator whose SIM
card is in your device.
● UPUK code — This code (8 digits) is required to
change a blocked UPIN code. If the code is not
supplied with the USIM card, contact the operator
whose USIM card is in your device.
22
Find help
● If you have set Packet data connection to
When available in connection settings, and
there is no packet data coverage (GPRS), the
device periodically tries to establish a packet
data connection. To prolong the operating time
of your device, select Packet data connection >
When needed.
the light sensor that observes lighting conditions
and adjusts the display brightness. Press
, and
select Tools > Settings > General >
Personalisation > Display and Light time-
out or Brightness.
● Leaving applications running in the background
increases the demand on battery power. To close
the applications you do not use, press and hold
, scroll to an application in the list, and press
C.
● The Maps application downloads new map
information when you scroll to new areas on the
map, which increases the demand on battery
power. You can prevent the automatic download
of new maps. See "Maps", p. 63.
Pressing C does not close Music player. To close
Music player, select it from the list and Options >
Exit.
● If the signal strength of the cellular network
varies much in your area, your device must scan
for the available network repeatedly. This
increases the demand on battery power.
● To turn on the power save mode, press the power
key, and select Activate power saving. To turn
off the power save mode, press the power key,
and select Deactivate power saving. You may
not be able to change the settings of certain
applications when the power save mode is
turned on.
network settings, the device searches for the
UMTS network. To only use the GSM network,
press
, and select Tools > Settings >
Phone > Network > Network mode >
GSM.
Free memory
● The backlight of the display increases the
demand on battery power. In the display
settings, you can change the time-out after
which the backlight is switched off, and adjust
To view how much memory different data types
consume, press
, and select Tools > File mgr.,
23
Find help
the desired memory, and Options > Details >
Memory.
To remove data you no longer need, use File
manager or go to the respective application. You
can remove the following:
● Messages in the folders in Messaging and
retrieved e-mail messages from the mailbox
● Saved web pages
● Contact information
● Calendar notes
● Applications shown in Application manager that
you do not need
● Installation files (.sis or .sisx) of applications you
have installed. Transfer the installation files to a
compatible PC.
● Images and video clips in Photos. Back up the
files to a compatible PC using Nokia Nseries PC
Suite.
24
Your device
Nokia Switch
Welcome
Transfer content
When you switch on your device for the first time,
the Welcome application is displayed.
You can use the Switch application to copy content
such as phone numbers, addresses, calendar items,
and images from your previous Nokia device to your
Nokia N79 using Bluetooth connectivity.
Select from the following:
● Sett. wizard — to configure various settings,
such as e-mail. For more information on the
Settings wizard application, see the guides
available at the Nokia product support pages or
your local Nokia website.
The type of content that can be transferred depends
on the model of the device from which you want to
transfer content. If that device supports
synchronisation, you can also synchronise data
between the devices. Your Nokia N79 notifies you if
the other device is not compatible.
● Switch — to transfer content, such as contacts
and calendar entries, from a compatible Nokia
device. See "Transfer content", p. 25.
If the other device cannot be switched on without
a SIM card, you can insert your SIM card in it. When
your Nokia N79 is switched on without a SIM card,
the offline profile is automatically activated, and
transfer can be done.
There may also be a demonstration about your
device available in the Welcome application.
To access the Welcome application later, press
and select Tools > Utilities > Welcome. You can
also access the individual applications from their
menu locations.
,
Transfer content for the first time
1. To retrieve data from the other device for the
first time, on your Nokia N79, select Switch in
25
Your device
the Welcome application, or press
select Tools > Utilities > Switch.
, and
Content is transferred from the memory of the other
device to the corresponding location in your Nokia
N79. The transfer time depends on the amount of
data to be transferred.
2. Select the connection type you want to use to
transfer the data. Both devices must support the
selected connection type.
Synchronise, retrieve, or send
content
3. If you select Bluetooth, connect the two devices.
To have your device search for devices with
Bluetooth connectivity, select Continue. Select
the device from which you want to transfer
Nokia N79. Enter a code (1-16 digits), and select
OK. Enter the same code on the other device, and
select OK. The devices are now paired. See "Pair
devices", p. 48.
After the first transfer, select from the following to
start a new transfer, depending on the model of the
other device:
to synchronise content between your Nokia
N79 and the other device, if the other device
supports synchronisation. The synchronisation is
two-way. If an item is deleted in one device, it is
deleted in both. You cannot restore deleted items
with synchronisation.
Some earlier Nokia devices may not have the
Switch application. In this case, the Switch
application is sent to the other device as a
message. To install the Switch application on the
other device, open the message, and follow the
instructions on the display.
to retrieve content from the other device to your
Nokia N79. With retrieval, content is transferred
from the other device to your Nokia N79. You may
be asked to keep or delete the original content in
the other device, depending on the device model.
4. From your Nokia N79, select the content you
to send content from your Nokia N79 to your
When the transfer has started, you can cancel it
and continue later.
other device
If Switch cannot send an item, depending on the
type of the other device, you can add the item to the
26
Your device
Nokia folder to C:\Nokia or E:\Nokia in your Nokia
N79. When you select the folder to transfer, the
items are synchronised in the corresponding folder
in the other device, and vice versa.
Display indicators
The device is being used in a GSM network
(network service).
Use shortcuts to repeat a transfer
The device is being used in a UMTS network
(network service).
After a data transfer, you can save a shortcut with
the transfer settings to the main view to repeat the
same transfer later.
To edit the shortcut, scroll to it, and select
Options > Shortcut settings. You can, for
example, create or change the name of the shortcut.
A transfer log is shown after every transfer. To view
the log of the last transfer, scroll to a shortcut in the
main view, and select Options > View log.
Handle transfer conflicts
If an item to be transferred has been edited in both
devices, the device attempts to merge the changes
automatically. If this is not possible, there is a
transfer conflict. Select Check one by one, Priority
to this phone, or Priority to other phone to solve
the conflict. For further instructions, select
Options > Help.
You have one or more unread messages in the
Inbox folder in Messaging.
You have received new e-mail in the remote
mailbox.
There are messages waiting to be sent in the
Outbox folder.
You have missed calls.
The ringing type is set to silent, and the message
alert tone and e-mail alert tone are set to off.
A timed profile is active.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network
service).
All calls to the device are diverted to another
number (network service). If you have two phone
lines, a number indicates the active line.
27
Your device
Your phone is connected to a network via
A UMTS packet data connection is active (network
service). indicates the connection is on hold and
that a connection is available.
High-speed downlink packet access (HSDPA) is
supported and active (network service). indicates
the connection is on hold and that a connection
is available. See "Fast downloading", p. 34.
wireless LAN or UMTS (network service) and ready
for an internet call.
A compatible microSD card is in the device.
A compatible headset is connected to the device.
FM transmitter is active but not transmitting.
FM transmitter is active and transmitting.
You have set the device to scan for wireless LANs,
and a wireless LAN is available (network service).
See "About WLAN", p. 43.
A compatible TV out cable is connected to the
device.
A compatible text phone is connected to the
A wireless LAN connection is active in a
device.
network that has encryption.
A data call is active (network service).
A wireless LAN connection is active in a network
that does not have encryption.
A GPRS packet data connection is active (network
service). indicates the connection is on hold and
that a connection is available.
Bluetooth connectivity is on. See "Bluetooth
connectivity", p. 46.
A packet data connection is active in a part of the
network that supports EGPRS (network service).
indicates the connection is on hold and that a
connection is available. The icons indicate that
EGPRS is available in the network, but your device is
not necessarily using EGPRS in the data transfer.
Data is being transmitted using Bluetooth
connectivity. When the indicator is blinking, your
device is trying to connect with another device.
A USB connection is active.
Synchronisation is in progress.
28
Your device
To open a list of last dialled numbers, in the standby
mode, press the call key.
Shortcuts
When in the menus, instead of using the scroll key,
you can use the number keys, #, and * to quickly
access the applications. For example, in the main
menu, press 2 to open Messaging or # to open the
application or folder in the corresponding location
in the menu.
To use voice commands, in the standby mode, press
and hold the right selection key.
To remove an application from the menu, select it,
andpressC. Some applicationsmaynotbe removed.
To switch between open applications, press and
Lock the keypad
hold
. Leaving applications running in the
When the device or keypad is locked, calls may be
possible to the official emergency number
programmed into your device.
background increases the demand on battery
power and reduces the battery life.
To view your multimedia content, press the
multimedia key.
To lock and unlock the keys, use the lock switch at
the top of the device, next to the power key.
To start a web connection (network service), in the
To set the keypad to lock automatically after a time-
standby mode, press and hold 0.
out, press
, and select Tools > Settings >
In many applications, to view the most common
General > Security > Phone and SIM card >
option items ( ), press the scroll key.
Keypad autolock period.
To illuminate the keypad in low-light conditions,
To change the profile, press the power key, and
select a profile.
briefly press the power key.
To switch between the General and Silent profiles,
in the standby mode, press and hold #.
Navi™ wheel
To call your voice mailbox (network service), in the
Hereafter referred to as scroll key.
standby mode, press and hold 1.
29
Your device
Use the Navi wheel to move around the menus and was breathing. To switch off the illumination, press
lists (up, down, left, or right). Press the scroll key to
, and select Tools > Settings > General >
select the action shown on top of the key or to show Navi wheel > Breathing.
the most used options
.
To turn the Navi wheel setting on or off, press
and select Tools > Settings > General > Navi
wheel > Navi wheel.
,
Multimedia menu
With the multimedia menu, you can access your
most frequently used multimedia content. The
selected content is shown in the appropriate
application.
When the Navi wheel setting is switched on in the
settings, you can scroll quickly through Photos,
Music Player, Nokia Video Centre, Contacts, and
Messaging lists, or the multimedia menu.
1. To open or close the
multimedia menu,
press the multimedia
key.
1. Move the tip of your finger
gently around the rim of the
scroll key clockwise or
anticlockwise. Keep moving
your finger until scrolling starts
on the display.
2. To browse the tiles,
scroll left or right, or, if
the Navi wheel setting
is set on, slide your
finger on the rim of the
scroll key.
2. To continue scrolling, slide your
finger around the rim of the
scroll key clockwise or
anticlockwise.
The tiles are the
following:
Sleep mode indicator
● TV & video — View your last watched video
clip, video clips stored on your device, or
access video services.
The inner rim of the Navi wheel
illuminates slowly when the device is in the sleep
mode. The light varies periodically as if the device
30
Your device
● Music — Enter Music player and the Now
Mobile Search
playing view, browse your songs and
playlists, or download and manage podcasts. Press
, and select Search.
● Images — View your most recently taken
images, start a slide show of your images or
video clips, or view media files in albums.
● Maps — View your favourite locations in the
Maps application.
You can also access Mobile Search directly from the
active standby mode, if that has been activated in
the settings.
Use Mobile Search to access internet search engines
and to find and connect to local services, websites,
images, and mobile content. You can also search
content in your device, such as calendar entries, e-
mail, and other messages.
● Internet — View your favourite web links in
the browser.
● Contacts — Add your own contacts, send
messages, or make voice calls. To add a new
contact to an empty position on the list, press
the scroll key, and select a contact. To send a
message, in the multimedia menu, select a
contact, and Options > Send text
Web search (network service)
1. In the Search main view, select Search the
Internet.
2. Select a search engine.
message or Send multimedia msg..
3. Enter your text to search.
4. Press the scroll key to start the search.
My content search
3. To scroll up or down in a tile, press the scroll key
up or down. To select items, press the scroll key.
To change the order of the tiles, select Options >
Arrange tiles.
To search content in your device, in the main view,
enter your text to the search field. The search results
are displayed on the screen as you write.
To return to the multimedia menu from an open
application, press the multimedia key.
31
Your device
To adjust the volume during a call, use the volume
key on the device or, if available, on the headset.
Some headsets have multimedia volume controls
that can only be used to adjust the volume for music
or video playback.
Headset
You can connect a compatible headset or
compatible headphones to your device. You may
need to select the cable mode.
You can also connect a compatible TV-out cable to
the Nokia AV Connector (3.5 mm) of your device.
Warning: When you
use the headset, your ability
to hear outside sounds may
be affected. Do not use the
headset where it can
Do not connect products that create an output
signal as this may cause damage to the device. Do
not connect any voltage source to the Nokia AV
Connector.
endanger your safety.
When connecting any external device or any
headset, other than those approved by Nokia for
use with this device, to the Nokia AV Connector, pay
special attention to volume levels.
Some headsets come in two
parts, a remote control unit
and headphones. A remote
control unit has a
microphone and keys to
Volume and loudspeaker
control
Warning: Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because
the volume may be extremely loud.
answer or end a phone call,
adjust the volume, and play music or video files. To
use the headphones with a remote control unit,
connect the unit to the Nokia AV Connector (3.5 mm)
in the device, then connect the headphones to the
unit.
To make handsfree phone calls, use a headset with
a compatible remote control unit, or use the
microphone on the device.
32
Your device
To increase or decrease the volume level when you When the offline profile is active, you can use your
have an active call or are listening to a sound, use
the volume key.
device without a SIM card.
The built-in loudspeaker
allows you to speak and
listen from a short
Important: In the offline profile you cannot
make or receive any calls, or use other features that
require cellular network coverage. Calls may still be
possible to the official emergency number
programmed into your device. To make calls, you
must first activate the phone function by changing
profiles. If the device has been locked, enter the lock
code.
When you have activated the offline profile, you can
still use the wireless LAN, for example, to read your
e-mail or browse on the internet. Remember to
comply with any applicable safety requirements
when establishing and using a wireless LAN
connection. You can also use Bluetooth connectivity
while in the offline profile.
distance without having to hold the device to your
ear.
To use the loudspeaker during a call, press
Loudsp..
To turn off the loudspeaker, press Handset.
Offline profile
To activate the offline profile, press the power key
briefly, and select Offline. Or, press
, and select
Tools > Profiles > Offline.
The offline profile lets you use the device without
connecting to the wireless network. When you
activate the offline profile, the connection to the
wireless network is turned off, as indicated by in
the signal strength indicator area. All wireless RF
signals to and from the device are prevented. If you
try to send messages, they are placed in the outbox
to be sent later.
To leave the offline profile, press the power key
briefly, and select another profile. The device re-
enables wireless transmissions (providing there is
sufficient signal strength).
33
Your device
Fast downloading
High-speed downlink packet access (HSDPA, also
called 3.5G, indicated by
) is a network service
in UMTS networks and provides high-speed data
downloads. When HSDPA support in the device is
activated and the device is connected to a UMTS
network that supports HSDPA, downloading data
such as messages, e-mail, and browser pages
through the cellular network may be faster. An
"Display indicators", p. 27.
You can activate or deactivate support for HSDPA in
the device settings. See "Packet data
settings", p. 189.
services, contact your service provider.
HSDPA only affects the download speed; sending
data to the network, such as messages and e-mail,
is not affected.
34
Web browser
With the Web browser, you can view hypertext
markup language (HTML) web pages on the internet
as originally designed. You can also browse web
pages that are designed specifically for mobile
devices, and use extensible hypertext markup
language (XHTML), orthe wireless markuplanguage
(WML).
Important: Use only services that you trust
and that offer adequate security and protection
against harmful software.
Important: Only install and use applications
and other software from trusted sources, such as
applications that are Symbian Signed or have
passed the Java Verified™ testing.
If the web page is unreadable or not supported and
garbage code is found while browsing, you can try
to press
, and select Web > Options >
To browse a web page, in the bookmarks view,
Settings > Page > Default encoding, and select
select a bookmark, or enter the address in the field
a corresponding encoding.
(
), and press the scroll key.
To browse the web, you need to have an internet
Some web pages may contain material, such as
graphics and sounds, that requires a large amount
of memory to view. If your device runs out of
memory while loading such a page, the graphics on
the page are not shown.
access point configured in your device.
Browse the web
Press
, and select Web.
To browse web pages without graphics, to save
memory, select Options > Settings > Page >
Load content > Text only.
Shortcut: To start the browser, press and
hold 0 in the standby mode.
35
Web browser
To enter a new web page address you want to visit, To prevent or allow the automatic opening of
select Options > Go to web address.
multiple windows, select Options > Window >
Block pop-ups or Allow pop-ups.
Tip: To visit a web page saved as a bookmark
in the bookmarks view, while browsing, press Shortcuts while browsing
1, and select a bookmark.
● Press 1 to open your bookmarks.
To retrieve the latest content of the page from the
server, select Options > Navigation options >
Reload.
● Press 2 to search for keywords on the current
page.
● Press 3 to return to the previous page.
To save the web address of the current page as a
● Press 5 to list all open windows.
bookmark, select Options > Save as bookmark.
● Press 8 to show the page overview of the current
page. Press 8 again to zoom in and view the
desired section of the page.
To view snapshots of the pages you have visited
during the current browsing session, select Back
(available if History list is set on in the browser
settings and the current page is not the first page
you visit). Select the page you want to go to.
● Press 9 to enter a new web address.
● Press 0 to go to the home page (if defined in
settings).
To save a page while browsing, select Options >
● Press * and # to zoom in or out on the page.
Tools > Save page.
Tip: To return to the standby mode with the
browser open in the background, press
twice or the end key. To return to the browser,
You can save pages and browse them later when
offline. You can also group pages into folders. To
access the pages you have saved, select Options >
Bookmarks > Saved pages.
press and hold
, and select the browser.
To open a sublist of commands or actions for the
page that is open, select Options > Service
options (if supported by the web page).
36
Web browser
When Mini Map is set on in the browser settings and
you scroll through a large web page, Mini Map opens
and shows an overview of the web page you
browse.
Browser toolbar
The browser toolbar helps you select frequently
used functions of the browser.
To set Mini Map on, select Options > Settings >
To open the toolbar, press and hold the scroll key
on an empty spot on a web page. To move within
the toolbar, scroll left or right. To select a feature,
press the scroll key.
General > Mini map > On.
To move in Mini Map, scroll left, right, up, or down.
When you find the desired location, stop scrolling.
Mini Map disappears and leaves you at the selected
location.
In the toolbar, select from the following:
● Frequently used links — View a list of the web
addresses you visit frequently.
When you are browsing a web page that contains a
large amount of information, you can also use Page
overview to view what kind of information the
page contains.
To show the page overview of the current page,
press 8. To find the desired spot on the page, scroll
up, down, left, or right. Press 8 again to zoom in and
view the desired section of the page.
● Page overview — See an overview of the
current web page.
● Find — Search for keywords within the current
page.
● Reload — Refresh the page.
● Subscribe to web feeds (if available) — View a
list of available web feeds on the current web
page, and subscribe to a web feed.
Web feeds and blogs
Navigate pages
Web feeds are xml files on web pages that are used
by the weblog community and news organisations
to share the latest headlines or text, for example,
news feeds. Blogs or weblogs are web diaries. Most
Mini Map and page overview help you navigate web
pages that contain a large amount of information.
37
Web browser
of the web feeds use RSS and Atom technologies. It The default access point for widgets is the same as
is common to find web feeds on web, blog, and wiki in the web browser. When active in the background,
pages.
some widgets may update information
automatically to your device.
The Web application automatically detects if a web
page contains web feeds.
Using widgetsmayinvolvethetransmissionoflarge
amounts of data through your service provider's
network. Contact your service provider for
To subscribe to a web feed, select Options >
Subscribe to web feeds.
information about data transmission charges.
To view the web feeds to which you have
subscribed, in the bookmarks view, select Web
feeds.
Content search
To update a web feed, select it and Options >
To search for keywords, phone numbers, or e-mail
addresses within the current web page, select
Options > Find and the desired option. To go to
the previous match, scroll up. To go to the next
match, scroll down.
Refresh.
To define how the web feeds are updated, select
Options > Settings > Web feeds.
Tip: To search for keywords within the page,
Widgets
press 2.
Your device supports widgets. Widgets are small,
downloadable web applications that deliver
multimedia, news feeds, and other information,
such as weather reports, to your device. Installed
widgets appear as separate applications in the
Applications folder.
Download and purchase
items
You can download items such as ringing tones,
images, operator logos, themes, and video clips.
These items can be provided free of charge, or you
You can download widgets using the Download!
application or from the web.
38
Web browser
can purchase them. Downloaded items are handled
by the respective applications in your device, for
example, a downloaded photo can be saved in
Photos.
Bookmarks
The bookmarks view opens when you open the Web
application. You canselect webaddresses from alist
or from a collection of bookmarks in the Recently
visited pages folder. You can also enter the URL
address of the web page you want to visit directly
into the field ( ).
Important: Only install and use applications
and other software from trusted sources, such as
applications that are Symbian Signed or have
passed the Java Verified testing.
indicates the starting page defined for the
default access point.
To download an item:
1. Select the link.
You can save URL addresses as bookmarks while
browsing on the internet. You can also save
addresses received in messages to your bookmarks
and send saved bookmarks.
2. Select the appropriate option to purchase the
item (for example, Buy).
3. Carefully read all the information provided.
To open the bookmarks view while browsing, press
4. To continue or cancel the download, select the
appropriate option (for example, Accept or
Cancel).
1, or select Options > Bookmarks.
To edit the details of a bookmark, such as the title,
select Options > Bookmark manager > Edit.
When you start a download, a list of ongoing and
completed downloads from the current browsing
session is displayed.
In the bookmarks view, you can also open other
browser folders. The Web application allows you to
save web pages during browsing. In the Saved
pages folder, you can view the content of the pages
you have saved offline.
To modify the list, select Options > Downloads.
In the list, scroll to an item, and select Options to
cancel ongoing downloads, or open, save, or delete
completed downloads.
39
Web browser
Web also keeps track of the web pages you visit
during browsing. In the Recently visited pages
folder, you can view the list of visited web pages.
In Web feeds, you can view saved links to web
feeds and blogs to which you have subscribed. Web
feeds are commonly found on major news
organisation web pages, personal weblogs, online
communities that offer the latest headlines, and
article summaries. Web feeds use RSS and Atom
technologies.
End the connection
To end the connection and view the browser page
offline, select Options > Tools > Disconnect; or
to end the connection and close the browser, select
Options > Exit.
To take the browser to the background, press the
end key once. To end the connection, press and hold
the end key.
To delete the information the network server
collects about your visits to various web pages,
select Options > Clear privacy data > Cookies.
Empty the cache
The information or services you have accessed are
stored in the cache memory of the device.
Connection security
A cache is a memory location that is used to store
data temporarily. If you have tried to access or have
accessed confidential information requiring
passwords, empty the cache after each use. The
information or services you have accessed are
stored in the cache.
If the security indicator ( ) is displayed during a
connection, the data transmission between the
device and the internet gateway or server is
encrypted.
The security icon does not indicate that the data
transmission between the gateway and the content
server (or the place where the requested resource
is stored) is secure. The service provider secures the
data transmission between the gateway and the
content server.
To empty the cache, select Options > Clear
privacy data > Cache.
40
Web browser
Security certificates may be required for some
services, such as banking services. You are notified
if the identity of the server is not authentic or if you
do not have the correct security certificate in your
device. For more information, contact your service
provider.
Page settings
● Load content — Select whether you want to
load images and other objects while browsing. If
you select Text only, to load images or objects
laterduring browsing, selectOptions > Tools >
Load images.
● Screen size — Select between full screen and the
normal view with the options list.
Web settings
● Default encoding — If text characters are not
shown correctly, you can selectanotherencoding
according to language for the current page.
● Block pop-ups — Allow or block automatic
opening of different pop-ups while browsing.
● Automatic reload — If you want the web pages
to be refreshed automatically while browsing,
select On.
Press
, and select Web.
General settings
● Access point — Change the default access point.
Some or all access points may be preset for your
device by your service provider; you may not be
able to change, create, edit, or remove them.
● Homepage — Define the home page.
● Mini map — Set Mini Map on or off. See"Navigate
pages", p. 37.
● Font size — Define the font size that is used for
web pages.
Privacy settings
● Recently visited pages — Enable or disable
automatic bookmark collecting. If you want to
continue saving the addresses of the visited web
pages into the Recently visited pages folder,
but hide the folder from the bookmarks view,
select Hide folder.
● History list — While browsing, to select Back to
see a list of the pages you have visited during the
current browsing session, set History list on.
● Security warnings — Hide or show security
notifications.
● Java/ECMA script — Enable or disable the use of
scripts.
41
Web browser
● Form data saving — If you do not want the data
you enter to different forms on a web page to be
saved and used the next time you open the page,
select Off.
● Cookies — Enable or disable the receiving and
sending of cookies.
Web feed settings
● Automatic updates — Define whether you want
the web feeds to be updated automatically and
how often you want to update them. Setting the
application to retrieve web feeds automatically
may involve the transmission of large amounts
of data through your service provider's network.
Contact your service provider for information
about data transmission charges.
● Acc. point for auto-update — Select the
desired access point for updating. This option is
only available when Automatic updates is on.
42
Connections
Your device offers several options to connect to the ● Operation at 2.4 GHz
internet or to another compatible device or PC.
● Wired equivalent privacy (WEP) with keys up to
128 bits, Wi-Fi protected access (WPA), and
802.1x encryption methods. These functions can
be used only if they are supported by the
network.
Wireless LAN
Your device supports wireless local area network
(WLAN). With WLAN, you can connect your device to
the internet and compatible devices that have
WLAN.
WLAN connections
To use WLAN, you must create an internet access
point (IAP) for WLAN. Use the access point for
applications that need to connect to the internet.
See "WLAN internet access points", p. 45.
About WLAN
To use WLAN, it must be available in the location,
and your device must be connected to the WLAN.
Some WLANs are protected, and you need an access
key from your service provider to connect to them.
Important: Always enable one of the
available encryption methods to increase the
security of your wireless LAN connection. Using
encryption reduces the risk of unauthorised access
to your data.
Features that use WLAN, or that are allowed to run
in the background while using other features,
increase the demand on battery power and reduce
the battery life.
Your device supports the following WLAN features:
● IEEE 802.11b/g standard
A WLAN connection is established when you create
a data connection using a WLAN internet access
43
Connections
point. The active WLAN connection ends when you
end the data connection.
this IAP, select the status and Start Web
browsing.
You can use WLAN during a voice call orwhenpacket
data is active. You can only be connected to one
WLAN access point device at a time, but several
applications can use the same internet access point.
If you select a secured WLAN network, you are asked
to enter the relevant passcodes. To connect to a
hidden network, you must enter the correct
network name (service set identifier, SSID). To
create a new access point for a hidden WLAN, select
New WLAN.
If you are connected to a WLAN, the IAP name is
displayed. To start the web browser using this IAP,
select the status and Continue Web browsing. To
end the connection in the WLAN, select the status
and Disconnect WLAN.
When the device is in the offline profile, you can still
use WLAN (if available). Remember to comply with
any applicable safety requirements when
establishing and using a WLAN connection.
Tip: To check the unique media access control
(MAC) address that identifies your device,
enter *#62209526# in the standby mode.
If WLAN scanning is off and you are not connected
to any WLAN, WLAN scanning off is displayed. To
set scanning on and search for available WLANs,
select the status and press the scroll key.
WLAN wizard
The WLAN wizard helps you to connect to a WLAN
and manage your WLAN connections.
To start a search for available WLANs, select the
status and Search for WLAN. To set WLAN scanning
off, select the status and select WLAN scanning
off.
The WLAN wizard shows the status of your WLAN
connections in the activestandbymode. To viewthe
available options, scroll to the row showing the
status, and select it.
If the search finds WLANs, for example, WLAN
network found is displayed, to create an internet
access point (IAP) and start the web browser using
To access the WLAN wizard application in the menu,
press
, and select Tools > WLAN wiz..
44
Connections
point device, or wireless devices are connected to a
wired LAN through a WLAN access point device.
WLAN internet access points
Press
, and select Tools > WLAN wiz.
In the ad hoc operating mode, devices can send and
Select Options and from the following:
receive data directly with each other.
● Filter WLAN networks — Filter out WLANs in
the list of found networks. The selected networks
are filtered out the next time the application
searches for WLANs.
Connection manager
Active data connections
● Details — View the details of a network shown
in the list. If you select an active connection, the
connection details are displayed.
Press
, and select Tools > Connectivity >
Conn. mgr. > Active data connections.
● Define access point — Create an internet access
point (IAP) in a WLAN.
In the active data connections view, you can see the
open data connections:
● Edit access point — Edit the details of an
data calls
existing IAP.
packet data connections
WLAN connections
You can also use connection manager to create
internet access points. See "Active data
connections", p. 45.
Note: The actual invoice for calls and services
from your service provider may vary, depending on
network features, rounding off for billing, taxes,
and so forth.
To end a connection, select Options >
Disconnect. To close all open connections, select
Options > Disconnect all.
Operating modes
There are two operating modes in WLAN:
infrastructure and ad hoc.
The infrastructure operating mode allows two
kinds of communication: wireless devices are
connected to each other through a WLAN access
45
Connections
To view the details of a connection, select
You can use the connection to send images, video
clips, music and sound clips, and notes, transfer files
from your compatible PC, and print images with a
compatible printer.
Options > Details.
Available WLAN networks
Since devices with Bluetooth wireless technology
communicate using radio waves, they do not need
to be in direct line-of-sight. However, they must be
within 10 metres (33 feet) of each other, although
the connection may be subject to interference from
obstructions such as walls or from other electronic
devices.
Press
, and select Tools > Connectivity >
Conn. mgr. > Available WLAN networks.
The available WLAN view shows a list of WLANs
within range, their network mode (infrastructure or
ad hoc), and signal strength indicator. is shown
for networks with encryption, and
if your device
has an active connection in the network.
This device is compliant with Bluetooth
To view the details of a network, select Options >
Specification 2.0 supporting the following profiles:
Generic Audio/Video Distribution Profile, Advanced
Audio Distribution Profile, Audio/Video Remote
Control Profile, Basic Imaging Profile, Basic Printing
Profile, Dial-up Networking Profile, File Transfer
Profile, Hands-Free Profile, Headset Profile, Human
Interface Device Profile, Object Push Profile, SIM
Access Profile, Synchronization Profile, Serial Port
Profile, and Phonebook Access Profile. To ensure
interoperability between other devices supporting
Bluetooth technology, use Nokia approved
enhancements for this model. Check with the
manufacturers of other devices to determine their
compatibility with this device.
Details.
To create an internet access point in a network,
select Options > Define access point.
Bluetooth connectivity
About Bluetooth connectivity
You can make a wireless connection to other
combatible devices, such as mobile phones,
computers, headsets, and car kits, with Bluetooth
connectivity.
46
Connections
Features using Bluetooth technology increase the
demand on battery power and reduce the battery
life.
● Remote SIM mode — To enable another device,
such as a compatible car kit enhancement, to use
the SIM card in your device to connect to the
network, select On. See "Remote SIM
mode", p. 49.
connectivity.
Security tips
Settings
Press
, and select Tools > Bluetooth.
Press
, and select Tools > Bluetooth.
When you are not using Bluetooth connectivity, to
control who can find your device and connect to it,
select Bluetooth > Off or My phone's visibility >
Hidden.
When you open the application for the first time,
you are asked to define a name for your device. You
can change the name later on.
Select from the following:
Do not pair with or accept connection requests from
an unknown device. This protects your device from
harmful content.
● Bluetooth — To make a wireless connection to
another compatible device, first set Bluetooth
connectivity On, then establish a connection. To
switch off Bluetooth connectivity, select Off.
● My phone's visibility — To allow your device to
be found by other devices with Bluetooth
wireless technology, select Shown to all. To set
a time after which the visibility is set from shown
to hidden, select Define period. To hide your
device from other devices, select Hidden.
● My phone's name — Edit the name shown to
other devices with Bluetooth wireless
Send data using Bluetooth
connectivity
Several Bluetooth connections can be active at a
time. For example, if you are connected to a
compatible headset, you can also transfer files to
another compatible device at the same time.
1. Open the application where the item you want
to send is stored. For example, to send an image
to another compatible device, open Photos.
technology.
47
Connections
2. Select the item and Options > Send > Via
Pair devices
Bluetooth.
To pair with compatible devices and view your
paired devices, in the main view of Bluetooth
connectivity, scroll right.
Devices with Bluetooth wireless technology that
are within range are displayed. Device icons are
as follows:
computer
phone
Before pairing, create your own passcode (1 to 16
digits), and agree with the owner of the other
device to use the same code. Devices that do not
have a user interface have a factory-set passcode.
The passcode is used only once.
1. To pair with a device, select Options > New
paired device. Devices that are within range are
displayed.
audio or video device
other device
To interrupt the search, select Stop.
3. Select the device with which you want to
connect.
2. Select the device, and enter the passcode. The
same passcode must be entered on the other
device as well.
4. If the other device requires pairing before data
can be transmitted, a tone sounds, and you are
asked to enter a passcode. See "Pair
devices", p. 48.
3. Some audio enhancements connect
automatically to your device after pairing.
Otherwise, scroll to the enhancement, and select
Options > Connect to audio device.
When the connection is established, Sending
data is displayed.
Tip: When searching for devices, some
(device address). To find the unique address
of your device, enter *#2820# in the standby
mode.
Paired devices are indicated by in the device
search.
To set a device as authorised or unauthorised, scroll
to the device, and select from the following options:
48
Connections
● Set as authorised — Connections between your
device and the authorised device can be made
without your knowledge. No separate
acceptance or authorisation is needed. Use this
status for your own devices, such as your
compatible headset or PC or devices that belong
to someone you trust. indicates authorised
devices in the paired devices view.
Tip: If your device notifies you that the
memory is full when you try to receive data
through Bluetooth connectivity, change
memory card as the memory where the data
is stored.
Block devices
Press
, and select Tools > Bluetooth.
● Set as unauthorised — Connection requests
from this device must be accepted separately
every time.
To block a device from establishing a Bluetooth
connection to your device, scroll right to open
Paired devices. Select a device you want to block
and Options > Block.
To cancel a pairing, scroll to the device, and select
Options > Delete.
To unblock a device, scroll right to Blocked
devices, select a device, and Options > Delete. To
unblock all blocked devices, select Options >
Delete all.
If you reject a pairing request from another device,
you are asked if you want to block all future
connection requests from this device. If you accept
the query, the remote device is added to the list of
blocked devices.
If you want to cancel all pairings, select Options >
Delete all.
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth
connectivity, a tone sounds, and you are asked if
you want to accept the message. If you accept,
is displayed, and the item is placed in the Inbox
folder in Messaging. Messages received through
Remote SIM mode
Bluetooth connectivity are indicated by
.
Before the remote SIM mode can be activated, the
twodevicesmustbepairedandthepairinginitiated
49
Connections
from the other device. When pairing, use a 16-digit
passcode, and set the other device as authorised.
USB
USB.
Press
, and select Tools > Connectivity >
To use the remote SIM mode with a compatible car
kit enhancement, activate Bluetooth connectivity,
and enable the use of the remote SIM mode with
your device. Activate the remote SIM mode from the
other device.
To have the device ask the purpose of the
connection each time a compatible data cable is
connected, select Ask on connection > Yes.
When the remote SIM mode is on in your device,
Remote SIM mode is displayed in the standby
mode. The connection to the wireless network is
If Ask on connection is set to off or you want to
change the mode during an active connection,
select USB connection mode and from the
following:
turned off, as indicated by
in the signal strength
indicator area, and you cannot use SIM card services
● PC Suite — Use Nokia PC applications such as
Nokia Nseries PC suite, and Nokia Software
Updater.
or features requiring cellular network coverage.
When the wireless device is inthe remote SIM mode,
you can only use a compatible connected
enhancement, such as a car kit, to make or receive
calls. Your wireless device will not make any calls
while in this mode, except to the emergency
numbers programmed into your device. To make
calls from your device, you must leave the remote
SIM mode. If the device is locked, enter the lock code
to unlock it.
● Mass storage — Transfer data between your
device and a compatible PC. Use this mode also
for downloading maps with the Nokia Map
Loader PC application.
● Image transfer — Print images on a compatible
printer.
● Media transfer — Synchronise music with
Windows Media Player.
To leave the remote SIM mode, press the power key,
and select Exit remote SIM mode.
50
Connections
PC connections
You can use your device with a variety of compatible
PC connectivity and data communications
applications. With Nokia Nseries PC Suite you can,
for example, transfer images between your device
and a compatible PC.
For information on Apple Macintosh support and
connecting your device to an Apple Macintosh
device, visit www.nseries.com/mac.
51
Personalise your device
You can personalise your device by changing the
standby mode, main menu, tones, themes, or font
size. Most of the personalisation options, such as
changing the font size, can be accessed through the
device settings.
The themes on a compatible memory card (if
inserted) are indicated by
. The themes on the
memory card are not available if the memory card
is not inserted in the device. If you want to use the
themes saved in the memory card without the
memory card, save the themes in the device
memory first.
Change the look of your
device
To change the layout of the main menu, select Menu
view.
To open a browser connection and download more
themes, in General, select Download themes
(network service). Use only services that you trust
and that offer adequate security and protection
against harmful software.
Press
, and select Tools > Settings >
General > Personalisation > Themes.
Use Themes to change the look of the display, such
as the wallpaper and icons.
To change the theme that is used for all the
To have a wallpaper image or a slide show of
changing images as the background in the standby
mode, select Wallpaper > Image or Slide show.
To change the background of the call bubble shown
applications in your device, select General.
To preview a theme before activating it, select
Options > Preview. To activate the theme, select
Options > Set. The active theme is indicated by
.
when a call comes in, select Call image.
52
Personalise your device
changes all your previous sound settings. If you
want to return to using the default tones, select
audio theme 'Nokia'.
You can change the sounds for different events
individually by selecting one of the sound groups,
for example, Menu events.
To add 3-D effects to the audio theme, select
Options > 3-D ringing tones. See "3-D
tones", p. 54.
To change the language that is used for the
synthesisedvoicetag, selectOptions > SetSpeech
language.
Changeable back cover
When you change the back cover of the device, the
theme on the display changes to match the colour
of the cover.
To change the theme automatically, you must have
a compatible back cover that supports theme
change.
To select, whether you want the theme to change
automatically, press
, and select Tools >
Settings > General > Personalisation >
Themes > Theme switch.
If you have changed the tones of individual events,
you can save the theme by selecting Options >
Save theme.
Audio themes
Press
, and select Tools > Settings >
Set sounds for events
General > Personalisation > Themes > Audio
theme.
To set the sound of an individual event to silent,
open an event group, select the event, and change
it to Silent.
To set a synthesised voice tag as the sound for an
event, open an event group, select the event, and
Speech. Enter the desired text, and press OK.
Speech is not available if you have set Say caller's
name on in Profiles.
In Audio themes, you can select a sound scheme
such as 'Space' to cover all device events, such as
calling, battery low, and mechanical events. The
sounds can be tones, synthesised voice tags, or a
combination of both.
Select the sound scheme you want to use in Active
audio theme. Note that activating an audio theme
53
Personalise your device
In the tones list, select Downloadsounds (network
service) to open a list of bookmarks. You can select
a bookmark and open a connection to a web page
to download more tones.
If you want the caller’s name to be spoken when
your device rings, select Options > Personalise >
Say caller's name > On. The caller’s name must
be found in Contacts.
Set tones in Profiles
Press
, and select Tools > Profiles.
You can use profiles to set and customise the
ringing tones, message alert tones, and other tones
for different events, environments, or caller groups.
To change the profile, select a profile, and
Options > Activate, or press the power key in the
standby mode. Scroll to the profile you want to
activate, and select OK.
To create a new profile, select Options > Create
new.
Tip: To switch between the general and silent
profiles in the standby mode, press and hold
3-D tones
#.
Press
, select Tools > Utilities > 3-D tones.
To modify a profile, scroll to the profile, and select
Options > Personalise. Scroll to the setting you
want to change, and press the scroll key to open the
choices. Tones stored on a compatible memory card
With 3-D tones, you can enable three-dimensional
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
(if inserted) are indicated with
.
To enable the 3-D effects, select 3-D ringing tone
effects > On. To change the ringing tone, select
Ringing tone and the desired ringing tone.
If you want to set a profile to be active a certain
time, select Options > Timed. When the set time
expires, the profile changes back to the previously
To change the 3-D effect that is applied to the
ringing tone, select Sound trajectory and the
desired effect.
active one. When a profile is timed,
is displayed
in the standby mode. The Offline profile cannot be
timed.
To modify the effect, select from the following
settings:
54
Personalise your device
● Trajectory speed — Scroll left or right to adjust theme. The active standby display shows
the speed at which sound moves from one application shortcuts, and
direction to another. This setting is not available events from applications
for all ringing tones.
such as calendar and
player.
● Reverberation — Select the type of echo.
● Doppler effect — Select On to have the ringing
tone sound higher when you are closer to your
device, and lower when you are farther away.
When you get closer to the device, the ringing
tone seems to become higher, and lower when
you move away from it. This setting is not
available for all ringing tones.
To change the selection
key shortcuts or the
default shortcut icons in
the active standby mode,
select Tools > Settings >
General >
Personalisation >
Standby mode >
To listen to the ringing tone with the 3-D effect,
select Options > Play tone. If you enable the 3-D
tones but do not select any 3-D effect, stereo
widening is applied to the ringing tone.
To adjust the ringing tone volume, select Tools >
Profiles > Options > Personalise > Ringing
volume.
Shortcuts. Some shortcuts may be fixed, and you
cannot change them.
To change the clock shown in the standby mode,
press
, and select Applications > Clock >
Options > Settings > Clock type.
You can also change the standby mode background
image or what is shown in the power saver in the
device settings.
Modify the standby mode
Tip: To check whether there are applications
running in the background, press and hold
. To close the applications you do not use,
scroll to an application in the list, and press
To change the look of the standby mode, press
, and select Tools > Settings > General >
Personalisation > Standby mode > Standby
55
Personalise your device
C. Leaving applications running in the
background increases the demand on battery
power.
Modify the main menu
To change the main menu view, in the main menu,
press
and select Tools > Settings >
General > Personalisation > Themes > Menu
view. You can change the main menu to be shown
as Grid, List, Horseshoe, or V-shaped.
To rearrange the main menu, in the main menu,
select Options > Move, Move to folder, or New
folder. You can move applications used less
frequently into folders and place applications that
you use more often into the main menu.
56
Positioning (GPS)
You can use applications such as Maps and GPS data accuracy of location data can be affected by
to find out your location, or measure distances and adjustments to GPS satellites made by the United
coordinates. These applications require a GPS
connection.
States government and is subject to change with
the United States Department of Defense civil GPS
policy and the Federal Radionavigation Plan.
Accuracy can also be affected by poor satellite
geometry. Availability and quality of GPS signals
may be affected by your location, buildings, natural
obstacles, and weather conditions. The GPS receiver
should only be used outdoors to allow reception of
GPS signals.
Any GPS should not be used for precise location
measurement, and you should never rely solely on
location data from the GPS receiver and cellular
radio networks for positioning or navigation.
About GPS
The Global Positioning System (GPS) is a worldwide
radio navigation system that includes 24 satellites
and their ground stations that monitor the
operation of the satellites. Your device has an
internal GPS receiver.
A GPS terminal receives low-power radio signals
from the satellites and measures the travel time of
the signals. From the travel time, the GPS receiver
can calculate its location to the accuracy of metres.
The coordinates in the GPS are expressed in degrees
and decimal degrees format using the international
WGS-84 coordinate system.
The Global Positioning System (GPS) is operated by
the government of the United States, which is solely
responsible for its accuracy and maintenance. The
To enable or disable different positioning methods,
such as Bluetooth GPS, press
, and select Tools >
Settings > General > Positioning >
Positioning methods.
57
Positioning (GPS)
point can be used. Your device asks for the internet
access point when GPS is used for the first time.
Assisted GPS (A-GPS)
Your device also supports Assisted GPS (A-GPS).
A-GPS is a network service.
Hold your device correctly
Assisted GPS (A-GPS) is used to retrieve assistance
data over a packet data connection, which assists in
calculating the coordinates of your current location
when your device is receiving signals from
satellites.
The GPS receiver is located on the back of the device.
When using the receiver, make sure that you do not
cover the antenna with your hand.
When you activate A-GPS, your device receives
useful satellite information from an assistance data
server over the cellular network. With the help of
assisted data, your device can obtain the GPS
position faster.
Your device is preconfigured to use the Nokia A-GPS
service, if no serviceprovider-specific A-GPS settings
are available. The assistance data is retrieved from
the Nokia A-GPS service server only when needed.
You must have an internet access point defined in
the device to retrieve assistance data from the
Nokia A-GPS service over a packet data connection.
Establishing a GPS connection may take from a
couple of seconds to several minutes. Establishing
a GPS connection in a vehicle may take longer.
The GPS receiver draws its power from the device
battery. Using the GPS receiver may drain the
battery faster.
To define an access point for A-GPS, press
, and
select Tools > Settings > General >
Positioning > Positioning server > Access
point. A wireless LAN access point cannot be used
for this service. Only a packet data internet access
58
Positioning (GPS)
If your device has found
satellites, a bar for each
satellite is shown in the
satellite info view. The
longer the bar, the
Tips on creating a GPS
connection
If your device cannot find the satellite signal,
consider the following:
stronger the satellite
signal. When your device
● If you are indoors, go outdoors to receive a better
signal.
has received enough data from the satellite signal
to calculate the coordinates of your location, the bar
turns black.
Initially your device must receive signals from at
least four satellites to be able to calculate the
coordinates of your location. When the initial
calculation has been made, it may be possible to
continue calculating the coordinates of your
location with three satellites. However, the
accuracy is generally better when more satellites
are found.
● If you are outdoors, move to a more open space.
● Ensure that your hand does not cover the GPS
antenna of your device. See "Hold your device
correctly", p. 58.
strength may be affected.
● Some vehicles have tinted (athermic) windows,
which may block the satellite signals.
Check satellite signal status
To check how many satellites your device has found,
and whether your device is receiving satellite
Position requests
signals, press
, and select Tools >
You may receive a request from a network service
to receive your position information. Service
providers may offer information about local topics,
such as weather or traffic conditions, based on the
location of your device.
Options > Satellite status. Or, in the Maps
application, select Options > Map view > GPS
info.
59
Positioning (GPS)
When you receive a position request, a message is
displayed showing the service that is making the
request. Select Accept to allow your position
information to be sent or Reject to deny the
request.
To edit or add information to a saved landmark (for
example, a street address), scroll to a landmark, and
select Options > Edit. Scroll to the desired field,
and enter the information.
You can sort your landmarks into preset categories,
and create new categories. To edit and create new
landmark categories, scroll right in Landmarks, and
select Options > Edit categories.
To add a landmark to a category, scroll to the
landmark in Landmarks, and select Options > Add
to category. Scroll to each category to which you
want to add the landmark, and select it.
To send one or several landmarks to a compatible
device, select Options > Send, and the method.
Your received landmarks are placed in the Inbox
folder in Messaging.
Landmarks
Press
, and select Tools > Connectivity >
Landmarks.
With Landmarks, you can save the position
information of specific locations in your device. You
can sort the saved locations into different
categories, such as business, and add other
information to them, such as addresses. You can use
your saved landmarks in compatible applications,
such as GPS data and Maps.
GPS coordinates are expressed in degrees and
decimal degrees format using the international
WGS-84 coordinate system.
To create a new landmark, select Options > New
landmark. To make a positioning request for your
current location, select Current position. To enter
the position information manually, select Enter
manually.
GPS data
GPS data is designed to provide route guidance
information to a selected destination, position
information about your current location, and
traveling information, such as the approximate
distance to the destination and approximate
duration of travel.
60
Positioning (GPS)
Press
, and select Tools > Connectivity > GPS Route guidance is designed to show the straightest
data.
route and the shortest distance to the destination,
measured in a straight line. Any obstacles on the
route, such as buildings and natural obstacles, are
ignored. Differences in altitude are not taken into
account when calculating the distance. Route
guidance is active only when you move.
To set your trip destination, select Options > Set
destination and a landmark as the destination, or
enter the latitude and longitude coordinates. Select
Stop navigation to clear the destination set for
your trip.
The coordinates in the GPS are expressed in degrees
and decimal degrees format using the international
WGS-84 coordinate system.
To use GPS data, the GPS receiver of your device
must initially receive position information from at
least four satellites to calculate the coordinates of
your location. When the initial calculation has been
made, it may be possible to continue calculating the
coordinates of your location with three satellites.
However, the accuracy is generally better when
more satellites are found.
Retrieve position information
Route guidance
Press
, and select Tools > Connectivity > GPS
data > Position.
Press
, and select Tools > Connectivity > GPS
data > Navigation.
In the position view, you can view the position
information of your current location. An estimate of
the accuracy of the location is displayed.
Start the route guidance outdoors. If started
indoors, the GPS receiver may not receive the
necessary information from the satellites.
To save your current location as a landmark, select
Options > Save position. Landmarks are saved
locations with more information, and they can be
used in other compatible applications and
Route guidance uses a rotating compass on the
device display. A red ball shows the direction to the
destination, and the approximate distance to it is
shown inside the compass ring.
transferred between compatible devices.
61
Positioning (GPS)
Trip meter
The trip meter has limited accuracy, and rounding
errors may occur. Accuracy can also be affected by
availability and quality of GPS signals.
Press
, and select Tools > Connectivity > GPS
data > Trip distance.
Select Options > Start to activate trip distance
calculation, and Stop to deactivate it. The
calculated values remain on the display. Use this
feature outdoors to receive a better GPS signal.
Select Reset to set the trip distance and time and
average and maximum speeds to zero, and to start
a new calculation. Select Restart to set the
odometer and total time to zero.
62
Maps
Options > Tools > Settings > Internet >
Network destination (shown only when you are
online).
About Maps
Press
, and select Maps.
When you browse a map in Maps, the map data for
the area is automatically downloaded to your
device through the internet. A new map is
downloaded only if you scroll to an area which is
not covered by maps already downloaded. Some
maps may be pre-loaded on the memory card in
your device.
With Maps, you can see your current location on the
map, browse maps for differentcities and countries,
searchforaddressesanddifferentpointsofinterest,
plan routes from one location to another, view
traffic details, and save locations as favourites and
send them to compatible devices.
You can also purchase extra services, such as guides,
voice guidance, and a traffic information service.
Maps uses GPS. See "Positioning (GPS)", p. 57. You
can define the positioning methods used with your
device in the device settings. See "Positioning
settings", p. 182. For the most accurate location
information, use either the internal GPS or a
compatible external GPS receiver.
When you use Maps for the first time, you may need
to define an internet access point for downloading
map information for your current location. To
change the default access point later, in Maps, select
You can download more maps to your device using
Nokia Map Loader PC software. See "Download
maps", p. 65.
Tip: You can also download maps by using a
wireless LAN connection.
Downloading maps may involve the transmission of
large amounts of data through your service
provider's network. Contact your service provider
for information about data transmission charges.
If you want the Maps application to establish an
internet connection automatically when you start
63
Maps
the application, in Maps, select Options > Tools >
Settings > Internet > Go online at start-up >
Yes.
To receive a note when your device registers to a
network outside your home cellular network, select
Options > Tools > Settings > Internet >
Roaming warning > On (shown only when you
are online). Contact your network service provider
for details and roaming costs.
Almost all digital cartography is inaccurate and
incomplete to some extent. Never rely solely on the
cartography that you download for use in this
device.
Your current location
To establish a GPS connection and zoom in to your
current location, select Options > My position, or
press 0. If the power saver turns on while the device
is attempting to establish a GPS connection, the
attempt is interrupted.
A GPS indicator
is shown on the display.
One bar is one satellite. When the device tries to find
a satellite, the bar is yellow. When the device
receives enough data from the satellite to establish
a GPS connection, the bar turns green. The more
green bars, the stronger the GPS connection.
When the GPS connection is active, your current
location is indicated on the map with
.
Browse maps
Move and zoom
To move on the map, scroll
up, down, left, or right. The
map is oriented towards
north by default. The
compass rose displays the
orientation of the map and
rotates during navigation
when the orientation
changes.
The map coverage varies by country.
When you open the Maps application, Maps zooms
in to the location that was saved from your last
session. If no position was saved from the last
session, the Maps application zooms in to the
capital city of the country you are in based on the
information the device receives from the cellular
network. At the same time, the map of the location
is downloaded, if it has not been downloaded
during previous sessions.
When you browse the map
64
Maps
on the display, a new map is automatically
downloaded if you scroll to an area which is not
covered by maps already downloaded. These maps
are free ofcharge, but downloading mayinvolve the
transmission of large amounts of data through your
service provider's network. For more information
on data transmission charges, contact your service
provider.
The maps are automatically saved on a compatible
memory card (if inserted and set as the default
maps storage).
To zoom in or out, press * or #. Use the scale bar to
estimate the distance between two points on the
map.
Adjust the map view
To define the metric system used in the maps, select
Options > Tools > Settings > Map > System
of measurement > Metric or Imperial.
To define what kinds of points of interest are shown
on the map, select Options > Tools > Settings >
Map > Categories and the desired categories.
To select whether you want to view maps in 2-D
mode, 3-D mode, as satellite image, or hybrid, select
Options > Map mode > Map, Map 3D,
Satellite, or Hybrid. Satellite images may not be
available for all geographic locations.
To define whether you want the map view to be a
day view or a night view, select Options > Tools >
Settings > Map > Colours > Day mode or Night
mode.
To adjust other internet, navigation, routing, and
general map settings, select Options > Tools >
Settings.
Download maps
When you browse a map on the display in Maps, a
new map is automatically downloaded if you scroll
to an area which is not covered by maps already
downloaded. You can view the amount of
transferred data from the data counter (kB) shown
on the display. The counter shows the amount of
network traffic when you browse maps, create
routes, or search for locations online. Downloading
maps data may involve the transmission of large
amounts of data through your service provider’s
network. Contact your service provider for
information about data transmission charges.
To prevent the device from automatically
downloading maps through the internet, for
65
Maps
example, when you are outside your home cellular information to check the version of map data to be
network, or other map related data required by the downloaded.
extra services, select Options > Tools >
Settings > Internet > Go online at start-up >
No.
After you have installed the PC software to your PC,
to download maps, do the following:
1. Connect your device to the PC by using a
compatible USB data cable. Select Mass
storage as the USB connection mode.
To define how much memory card space you want
to use for saving maps or voice guidance files, select
Options > Tools > Settings > Map >
2. Open Nokia Map Loader in your PC. Nokia Map
Loader checks the version of map data to be
downloaded.
Maximum memory use > Max. memory card
use. This option is available only whena compatible
memory card is inserted and set as the default maps
storage. When the memory is full, the oldest map
data is deleted. The saved maps data can be deleted
using Nokia Map Loader PC software.
3. Select the maps or voice guidance files you want,
and download and install them to your device.
Tip: Use Nokia Map Loader to save on mobile
data transfer fees.
Nokia Map Loader
Nokia Map Loader is PC software that you can use to
download and install maps from the internet to a
compatible memory card. You can also use it to
download voice files for turn-by-turn navigation.
Find a place
To search for a location or point of interest by
keyword, in the main view, enter the name of the
place or the desired keyword in the search field, and
select Search.
To use Nokia Map Loader, you must first install it to
a compatible PC. You can download the PC software
from the internet at www.nokia.com/maps. Follow
the instructions on the screen.
You must use the Maps application and browse
maps at least once before using Nokia Map Loader.
Nokia Map Loader uses the Maps history
To import a location address from your contact
information, select Options > Select from
Contacts.
66
Maps
To use a location on the map, for example, as a
starting point for a nearby search, to plan a route,
view its details, or start navigation (extra service),
press the scroll key, and select the desired option.
To browse through places and attractions by
categories in your area, select Options > Search,
and a category. If you search by an address, you
must enter the city and country. You can also use an
address you have saved to a contact card in
Contacts.
To save a location as a favourite place, in the desired
location, press the scroll key, select Add to My
places, enter a name for the place, and select OK.
You can also save the location to a route or a
collection. To view your saved places, select
Options > Favourites > My places.
the active toolbar or the options menu, and the
method.
To view your browsing history, places you have
viewed on a map, and routes and collections you
have created, select Options > Favourites, and
the desired option.
Plan a route
To plan a route to a destination, scroll to the desired
destination, press the scroll key, and select Add to
route. The location is added to the route.
To add more locations to the route, select
Options > Add route point. The first selected
stopover is the starting point. To change the order
of the stopovers, press the scroll key, and select
Move.
To send a saved place to a compatible device, in the
Places view, press the scroll key, and select Send. If
you send the place in a text message, the
information is converted to plain text.
To take a screen shot of your location, select
Options > Tools > Save map screen shot. The
screen shot is saved in Photos. To send the screen
shot, open Photos, and select the send option from
Extra services for Maps
You can purchase a licence and download different
kinds of guides, such as city and travel guides, for
different cities to your device. You can also purchase
a licence for a turn-by-turn Drive & Walk navigation
service with voice guidance, and a traffic
information service to use it in Maps. A navigation
licence is region specific (region selected when
67
Maps
purchasing the licence), and it can be used only on card or have the amount charged to your phone bill
the selected area. The downloaded guides are
automatically saved to your device.
The licence you purchase for a guide or navigation
can be transferred to another device, but the same
licence can only be active in one device at a time.
(if supported by your cellular network service
provider).
Drive navigation
To purchase a Drive & Walk navigation service,
select Options > Extras > Drive & Walk.
To view and update your licences, select Options >
When you use drive navigation for the first time,
you are prompted to select the language of the
voice guidance and download the voice guidance
files of the selected language. You can also
download voice guidance files using Nokia Map
Loader. See "Download maps", p. 65.
Extras > My licenses.
Traffic and guide information and related services
are generated by third parties independent of
Nokia. The information may be inaccurate and
incomplete to some extent and is subject to
availability. Never rely solely on the
To change the language later, in the Maps main
view, select Options > Tools > Settings >
Navigation > Voice guidance and a language,
and download the voice guidance files for the
selected language.
aforementioned information and related services.
Downloading and using extra services may involve
the transmission of large amounts of data through
your service provider’s network. Contact your
service provider for information about data
transmission charges.
Walk navigation
To purchase a Walk navigation service, select
Options > Extras > Walk.
Navigation
Walk navigation differs from drive navigation in
many ways: The walking route ignores any possible
limitations to car navigation, such as one-way
streets and turn restrictions, and includes areas
To purchase a Drive & Walk navigation service with
voice guidance or Walk navigation only, select
Options > Extras > Drive & Walk or Walk. You
can pay for the service through an accepted credit
68
Maps
such as pedestrian zones and parks. It also
Some keypad keys correspond to the options in the
prioritises walkways and smaller roads, and omits
view. For example, press 2 to repeat a voice
highways and motorways. The length of a walking command, 3 to switch between day mode and night
route is limited to a maximum of 50 kilometres (31 mode, and 4 to save the current place.
miles) and the travelling speed to a maximum of 30
km/h (18 miles/h). If the speed limit is exceeded,
Traffic information
navigation stops and is resumed once the speed is
To purchase a licence for a real-time traffic
back within limits.
information service, select Options > Extras >
Turn-by-turn navigation or voice guidance are not
available for Walk navigation. Instead, a big arrow
shows the route and a small arrow at the bottom of
the screen points directly to destination. Satellite
view is only available for Walk navigation.
Traffic info. The service provides information
about traffic events that may affect your travel.
Downloading extra services may involve the
transmission of large amounts of data through your
service provider’s network. Contact your service
provider for information about data transmission
charges.
Navigate to the desired destination
To start navigation to the desired destination with
GPS, select any location on the map or in a results
list, and Options > Drive to or Walk to.
To view information about traffic events that can
cause delays or prevent you from reaching the
destination, select Options > Traffic info. The
events are shown on the map as warning triangles
and line indicators. You can useautomaticrerouting
to avoid them.
To switch between different views during
navigation, scroll left or right.
To stop navigation, press Stop.
To select navigation options, press Options during
navigation. If driving navigation is active, a menu
view with various options is displayed.
To view more information about an event and the
possible rerouting options, press the scroll key.
To update the traffic information, select Update
traffic info. To define how often the traffic
69
Maps
information is updated automatically, select
Options > Tools > Settings > Navigation >
Traffic info update.
the amount charged to your phone bill (if supported
by your cellular network service provider).
To confirm the purchase, select OK twice. To receive
To automatically create an alternative route in case a confirmation of the purchase through e-mail,
of a traffic event that would cause delays or prevent enter your name and e-mail address, and select
you from reaching the destination, select
Options > Tools > Settings > Navigation >
Reroute due to traffic > Automatic.
OK.
Guides
To purchase and download different kinds of
guides, such as city and travel guides, for different
cities to your device, select Options > Extras >
Guides.
The guides provide information about attractions,
restaurants, hotels, and otherpointsofinterest. The
guides must be downloaded and purchased before
use.
To browse a downloaded guide, on the My guides
tab in Guides, select a guide and a subcategory (if
available).
To download a new guide to your device, in Guides,
select the desired guide and Download > Yes. The
purchase process starts automatically. You can pay
for the guides using an accepted credit card or have
70
Music folder
Play a song or a podcast episode
Music player
To open Music player, press
, and select Music >
Music player.
Warning: Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because
the volume may be extremely loud.
Music player supports files formats such as AAC, AAC
+, eAAC+, MP3, and WMA. Music player does not
necessarily support all features of a file format or all
the variations of file formats.
You can also use Music player to listen to podcast
episodes. Podcasting is the method for delivering
audio or video content over the internet using
either RSS or Atom technologies for playback on
mobile devices and PCs.
You can transfer music from other compatible
devices to your device. See "Transfer music to your
device", p. 74.
Tip: You can access the Music player from the
multimedia menu.
You may have to refresh the music and podcast
libraries after you have updated the songor podcast
to the library, in the Music player main view, select
Options > Refresh library.
To play a song or a podcast episode, do the
following:
1. Select categories to navigate to the song or
podcast episode you want to hear. If the Navi
wheel setting is set on in the settings, to browse
the lists, slide your finger on the rim of the scroll
key .
71
Music folder
To pause playback, press the scroll key; to resume,
press the scroll key again. To stop playback, scroll
down.
To modify the balance and stereo image or to
enhance bass, select Options > Audio settings.
To view a visualisation during playback, select
To fast forward or rewind, press and hold the scroll Options > Show visualisation.
key to the right or left.
To return to the standby mode and leave the player
To go to the next item,
scroll right. To return to
the beginning of the item,
scroll left. To skip to the
previous item, scroll left
again within 2 seconds
after a song or podcast has
started.
playing in the background, press the end key, or to
switch to another open application, press and hold
.
To close the player, select Options > Exit.
Music menu
Press
, and select Music > Music player.
The music menu shows the available music. To view
all songs, sorted songs, playlists, or podcasts in the
music menu, select the desired option.
To switch random play
(
) on or off, select
Options > Shuffle.
When the Music player is playing in the background,
to open the Now playing view, press and hold the
multimedia key.
To repeat the current item ( ), all items ( ), or
to switch repeat off, select Options > Repeat.
If you play podcasts, shuffle and repeat are
automatically switched off.
Playlists
To adjust the volume, press the volume key.
Press
, and select Music > Music player.
To modify the tone of the music playback, select
To view and manage playlists, in the music menu,
Options > Equaliser.
select Playlists.
72
Music folder
To view details of the playlist, select Options >
To remove a song from a playlist, select Options >
Remove. This does not delete the song from the
device; it only removes it from the playlist.
To reorder songs in a playlist, scroll to the song you
want to move, and select Options > Move. To grab
songs and drop them to a new position, use the
scroll key.
Playlist details.
Create a playlist
1. Select Options > Create playlist.
2. Enter a name for the playlist, and select OK.
3. To add songs now, select Yes; or to add the
songs later, select No.
4. If you select Yes, select artists to find the songs
you want to include in the playlist. Press the
scroll key to add items.
Podcasts
Press
, and select Music > Music player >
Podcasts.
To show the song list under an artist title, scroll
The podcast menu displays the podcasts available
right. To hide the song list, scroll left.
in the device.
5. When you have made your selections, select
Podcast episodes have three states: never played,
partially played, and completely played. If an
episode is partially played, it plays from the last
playback position the next time it is played. If an
episode is never played or completely played, it
plays from the beginning.
Done.
If a compatible memory card is inserted, the
playlist is saved to the memory card.
To add more songs later, when viewing the playlist,
select Options > Add songs.
To add songs, albums, artists, genres, and
Home network with music player
composers to a playlist from the different views of
the music menu, select an item and Options > Add
to playlist > Saved playlist or New playlist.
You can play content stored in your Nokia device
remotely on compatible devices in a home network.
You can also copy files from your Nokia device to
other devices that are connected to the home
73
Music folder
network. Home network must be configured first.
See "About home network", p. 110.
● Microsoft Windows XP operating system (or
later)
● A compatible version of the Windows Media
Player application. You can get more detailed
information about Windows Media Player
compatibility from your device's product pages
on the Nokia website.
Play a song or a podcast remotely
1. Press
, and select Music > Music player.
2. Select categories to navigate to the song or
podcast episode you want to hear. Slide your
finger around the rim of the scroll key to browse
the lists.
● Nokia Nseries PC Suite 2.1 or later
Windows Media Player 10 may cause playback
delays to WMDRM technology protected files after
they have been transferred to your device. Check
Microsoft support website for a hotfix to Windows
Media Player 10 or get a newer compatible version
of Windows Media Player.
3. Select the desired song or podcast and
Options > Play > Via home network.
4. Select the device in which the file is played.
Copy songs or podcasts wirelessly
To copy or transfer media files from your device to
another compatible device in a home network,
select a file and Options > Copy to home
network. Content sharing does not have to be
switched on in the home network settings. See "Set
sharing on and define content", p. 112.
Transfer music from PC
You can use the following methods to transfer
music:
● To view your device on a PC as a mass memory
device where you can transfer any data files,
make the connection with a compatible USB data
cable or Bluetooth connectivity. If you are using
a USB cable, select Mass storage as the
Transfer music to your device
You can transfer music from a compatible PC or
other compatible devices using a compatible USB
data cable or Bluetooth connectivity.
connection mode. A compatible memory card
must be inserted in the device.
PC requirements for music transfer:
74
Music folder
● To synchronise music with Windows Media
Player, connect a compatible USB data cable and
select Media transfer as the connection mode.
A compatible memory card must be inserted in
the device.
To change the default USB connection mode, press
, and select Tools > Connectivity > USB >
USB connection mode.
3. Drag and drop songs to the Sync List on the
right.
You can see the amount of available memory in
your device above the Sync List.
4. To remove songs or albums, select an item in the
Sync List, right-click, and select Remove from
list.
5. To start the synchronisation, click Start Sync.
Transfer with Windows Media Player
Automatic synchronisation
Music synchronisation functions may vary between
different versions of the Windows Media Player
application. For more information, see the
corresponding Windows Media Player guides and
help. The following instructions are for Windows
Media Player 11.
1. To activate the automatic synchronisation
function in Windows Media Player, click the
Sync tab, select Nokia Handset > Set Up
Sync..., and check the Sync this device
automatically check box.
2. Select the playlists you want to synchronise
automatically in the Available playlists pane,
and click Add.
Manual synchronisation
With manual synchronisation, you can select the
songs and playlists that you want to move, copy, or
remove.
The selected items are transferred to the
Playlists to sync pane.
1. After your device is connected with Windows
Media Player, select your device in the
navigation pane on the right, if more than one
device is connected.
3. To finalise the setup for automatic
synchronisation, click Finish.
When the Sync this device automatically check
box is checked and you connect your device to the
PC, the music library in your device is automatically
2. In the left navigation pane, browse the music
files on your PC which you want to synchronise.
75
Music folder
updated based on the playlists you select for
synchronisation in Windows Media Player. If no
playlists have been selected, the whole PC music
library is selected for synchronisation. If there is not
enough free memory in your device, Windows
Media Player selects manual synchronisation
automatically.
Nokia Music Store settings
The availability and appearance of the music store
settings may vary. The settings may also be
predefined and not editable. If the settings are not
predefined, you may be asked to select the access
point to use when connecting to the music store. To
select the access point, select Default access
point.
To stop automatic synchronisation, click the Sync
tab, and select Stop Sync to 'Nokia Handset'.
In the music store, you may be able to edit the
settings by selecting Options > Settings.
Nokia Music Store
FM transmitter
In the Nokia Music Store (network service) you can
search, browse, and purchase music to download to
your device. To purchase music, you first need to
register for the service.
About the FM transmitter
The availability of this feature may vary by country.
To check the Nokia Music Store availability in your
Some countries may restrict the use of the FM
transmitter. Before using the feature in a foreign
country, see www.nseries.com/fmtransmitter to
check if use is permitted.
country, visit music.nokia.com.
To access the Nokia Music Store, you must have a
valid internet access point in the device.
With the FM transmitter, you can play songs in your
device through any compatible FM receiver, such as
a car radio or a home stereo system.
To open Nokia Music Store, press
, and select
Music > Music store.
To find more music in different categories of the
music menu, select Options > Find in Music
store.
The operating distance of the FM transmitter is up
to a maximum of 3 metres (10 feet). The
76
Music folder
transmission may be subject to interference due to 4. To activate the FM transmitter, set FM
obstructions, suchaswalls, otherelectronicdevices,
or from public radio stations. The FM transmitter
may cause interference to nearby FM receivers
operating on the same frequency. To avoid
transmitter to On, and enter a frequency that is
free from other transmissions. For example, if
the frequency 107.8 MHz is free in your area and
you tune your FM receiver to it, you must also
tune the FM transmitter to 107.8 MHz.
interference, always search for a free FM frequency
on the receiver before using the FM transmitter.
5. Tune the receiving device to the same frequency,
The FM transmitter cannot be used at the same time
as the FM radio of your device.
and select Options > Exit.
To adjust the volume, use the volume function in
the receiving device. Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing.
The operating frequency range of the transmitter is
from 88.1 to 107.9 MHz.
When the transmitter is on and transmitting sound,
is displayed in the standby mode. If the
To deactivate the FM transmitter, select Options >
transmitter is on, but not transmitting anything,
is displayed and a periodic tone sounds. If the
transmitter is not transmitting anything for several
minutes, it switches off automatically.
FM transmitter, and set FM transmitter to Off.
If music is not played for several minutes, the
transmitter switches off automatically.
FM transmitter settings
Play a song using FM transmitter
Press
, and select Music > FM transmitter.
To play a song stored in your device through a
compatible FM receiver, do the following:
To activate the FM transmitter, select FM
transmitter > On.
1. Press
, and select Music > Music player.
To set a frequency manually, select Frequency and
2. Select a song or a playlist to be played.
enter the desired value.
3. In the Now playing view, select Options > FM
transmitter.
77
Music folder
To list the previously used frequencies, select
● Default access point — Select the access point
to define your connection to the internet.
● Search service URL — Define the podcast search
service to be used in searches.
Options > Last frequencies.
Nokia Podcasting
Download settings
With the Nokia Podcasting application (network
service), you can search, discover, subscribe to, and
download podcasts over the air, and play, manage,
and share audio and video podcasts with your
device.
To edit the download settings, press
, and select
Music > Podcasting > Options > Settings >
Download.
Define the following:
● Save to — Define the location where you want
to save your podcasts.
Podcasting settings
● Update interval — Define how often podcasts
are updated.
Before using Nokia Podcasting, set your connection
and download settings.
● Next update date — Define the date of the next
automatic update.
The recommended connection method is WLAN.
Check with your service provider for terms and data
service fees before using other connections. For
example, a flat rate data plan can allow large data
transfers for one monthly fee.
● Next update time — Define the time of next
automatic update.
Automatic updates only occur if a specific default
access point is selected and Nokia Podcasting is
running. If Nokia Podcasting is not running, the
automatic updates are not activated.
Connection settings
To edit the connection settings, press
, and
● Download limit (%) — Define the size of the
memory that is used for podcast downloads.
● If limit exceeds — Define what to do if the
downloads exceed the download limit.
select Music > Podcasting > Options >
Settings > Connection.
Define the following:
78
Music folder
Setting the application to retrieve podcasts
To start a new search, select Options > New
automatically may involve the transmission of large search.
amounts of data through your service provider’s
To go the website of the podcast, select Options >
network. Contact your service provider for
Open web page (network service).
information about data transmission charges.
To see the details of a podcast, select Options >
To restore the default settings, select Options >
Description.
Restore default in the settings view.
To send selected podcasts to another compatible
device, select Options > Send.
Search podcasts
Search helps you to find podcasts by keyword or
title.
Directories
Directories help you to find new podcast episodes
to which to subscribe.
The search engine uses the podcast search service
you set up in Podcasting > Options > Settings >
Connection > Search service URL.
To open directories, press
, and select Music >
Podcasting > Directories.
To search for podcasts, press
, select Music >
Contents of the directories change. Select the
desired directory folder to update it (network
service). The colour of the folder changes, when the
update is complete.
Podcasting > Search, and enter the desired
keywords.
Tip: Search looks for podcast titles and
keywords in descriptions, not specific
episodes. General topics, such as football or
hip-hop, usually give better results than a
specific team or artist.
Directories can include top podcasts listed by
popularity or themed folders.
To open the desired folder topic, select it and
Open. A list of podcasts is displayed.
To subscribe to marked channels and add them to
your podcasts, select Subscribe. You can also add a
podcast by selecting one.
79
Music folder
To subscribe to a podcast, select the title, and
manage, download, and play episodes in
Update. After you have subscribed to episodes of a Podcasts.
podcast, you can download, manage, and play them
To see the podcasts you have subscribed to, select
in the podcasts menu.
Podcasting > Podcasts.
To add a new directory or folder, select Options >
New > Web directory or Folder. Select a title, URL
of the .opml (outline processor markup language)
file, and Done.
To see individual episode titles (an episode is a
particular media file of a podcast), select the
podcast title.
To start a download, select the episode title. To
download or to continue to download selected or
marked episodes, select Download. You can
To edit the selected folder, web link, or web
directory, select Options > Edit.
To import an .opml file stored on your device, select download multiple episodes at the same time.
Options > Import OPML file. Select the location of
To play a portion of a podcast during download or
the file, and import it.
after partial downloading, select the podcast and
To send a directory folder as a multimedia message Options > Play preview.
or using Bluetooth connectivity, select the folder
Fully downloaded podcasts can be found in the
Podcasts folder, but are not shown until the library
is refreshed.
and Options > Send.
When you receive a message with an .opml file
using Bluetooth connectivity, open the file to save
the file into the Received folder in directories. Open
the folder to subscribe to any of the links to add to
your podcasts.
Play and manage podcasts
To display the available episodes from the selected
podcast, in Podcasts, select Open. Under each
episode, you see the file format, the size of the file,
and time of the upload.
Downloads
After you have subscribed to a podcast, from
directories, search, or by entering a URL, you can
80
Music folder
When the podcast is fully downloaded, to play the
To open the website of the podcast (network
service), select Options > Open web page.
full episode, select it and Play.
To update the selected podcast or marked podcasts, Some podcasts provide the opportunity to interact
for a new episode, select Options > Update.
with the creators by commenting and voting. To
connect to the internet to do this, select Options >
View comments.
To stop the updating, select Options > Stop
update.
To add a new podcast by entering the URL of the
podcast, select Options > New podcast. If you do
not have an access point defined or if during packet
data connection you are asked to enter a user name
and password, contact your service provider.
Radio applications
Radio or Internet radio.
Press
, select Music > Radio, and Visual
To edit the URL of the selected podcast, select
FM radio
Options > Edit.
You can use the radio as a traditional FM radio and
automatically tune into and save stations. If you
tune into stations that offer the Visual Radio service
(network service), you will see information related
to the radio programme on the display.
The radio supports Radio Data System (RDS)
functionality. Radio stations supporting RDS may
display information, such as the name of the
station. If activated in the settings, RDS also
attempts to scan foran alternative frequency for the
currently playing station, if the reception is weak.
To delete a downloaded podcast or marked
podcasts from your device, select Options >
Delete.
To send the selected podcast or marked podcasts to
another compatible device as .opml files as a
multimedia message or by Bluetooth connectivity,
select Options > Send.
To update, delete, and send a group of selected
podcasts at once, select Options > Mark/
Unmark, mark the desired podcasts, and select
Options to choose the desired action.
81
Music folder
When you open the radio for the first time, a wizard To adjust the volume, use the volume key.
helps you to save local radio stations (network
service).
Warning: Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because
the volume may be extremely loud.
If you cannot access the Visual Radio service, the
operators and radio stations in your area may not
support Visual Radio.
Listen to the radio
To listen to the radio using the loudspeaker, select
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for
the FM radio to function properly.
Options > Activate loudspeaker.
To view available stations based on location, select
Options > Station directory (network service).
To save the station to which you are currently tuned
to your station list, select Options > Save
station.
Press
, and select Music > Radio > Visual
Radio.
The quality of the radio broadcast depends on the
To open the list of your saved stations, select
coverage of the radio station in that particular area.
Options > Stations.
You can make a call or answer an incoming call
while listening to the radio. The radio is muted
when there is an active call.
To return to the standby mode while listening to the
FM radio in the background, select Options > Play
in background.
To start a station search, select
or
.
View visual content
To change the frequency manually, select
Options > Manual tuning.
To check availability and costs and to subscribe to
the service, contact your service provider.
If you have saved radio stations in your device, to
go to the next or previous saved station, select
or
.
82
Music folder
To view available visual content when listening to
a saved station that has a visual service ID, select
Options > Start visual service.
service. You do not need an access point to use
the application as an FM radio.
● Current region — Select the region where you
currently are. This setting is displayed only if
there is no network coverage when you start the
application.
Saved stations
To open the list of your saved stations, select
Options > Stations.
Your device can display the identity name of the FM
station to which you are tuned if the name is being
transmitted by the station.
To listen to a saved station, select Options >
Station > Listen. To view available visual content
for a station with Visual Radio service, select
Options > Station > Start visual service.
Nokia Internet Radio
To change station details, select Options >
With the Nokia Internet Radio application (network
service), you can listen to available radio stations
on the internet. To listen to radio stations, you must
have a WLAN or packet data access point defined in
your device. Listening to the stations may involve
the transmission of large amounts of data through
your service provider's network. The recommended
connection method is WLAN. Check with your
service provider for terms and data service fees
before using other connections. For example, a flat
rate data plan can allow large data transfers for a
set monthly fee.
Station > Edit.
FM radio settings
Press
, and select Music > Radio > Visual
Radio > Options > Settings
● Alternative frequencies — To automatically
search foralternative frequenciesif thereception
is weak, select Auto scan on.
● Auto-start service — To start Visual Radio
automatically when you select a saved station
that offers Visual Radio service, select Yes.
● Access point — Select the access point used for
the data connection when using Visual radio
83
Music folder
To adjust the volume, use the volume key.
To view station information, select Options >
Station information (not available if you have
saved the station manually).
If you are listening to a station saved in your
favourites, scroll left or right to listen to the
previous or next saved station.
Listen to internet radio stations
Press
, and select Music > Radio > Internet
radio.
Warning: Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because
the volume may be extremely loud.
Favourite stations
To listen to a radio station on the internet, do the
To view and listen to your favourite stations, press
, and select Music > Radio > Internet
radio > Favourites.
following:
1. Select a station from your favourites or the
station directory, or search stations by their
name from the Nokia Internet Radio service.
To add a station manually to favourites, select
Options > Add station manually. Enter the web
address of the station and a name that you want to
appear in the favourites list.
To add a station manually, select Options >
Add station manually. You can also browse for
station links with the Web application.
Compatible links are automatically opened in
the Internet Radio application.
To add the currently playing station to favourites,
select Options > Add to Favourites.
To view station information, to move a station up
or down in the list, or to delete a station from the
favourites, select Options > Station and the
desired option.
2. Select Listen.
The Now playing view opens displaying
information about the currently playing station
and song.
To view only stations beginning with particular
letters or numbers, start entering the characters.
Matching stations are displayed.
To stop the playback, pressthe scroll key; to resume,
press the scroll key again.
84
Music folder
● Browse by genre — View the available radio
station genres.
Search for stations
To search for radio stations in the Nokia Internet
Radio service by their name, do the following:
● Browse by language — View the languages in
which there are stations broadcasting.
● Browse by country — View the countries in
which there are stations broadcasting.
● Top stations — View the most popular stations
in the directory.
1. In the application main view, select Search.
2. Enter a station name or the first letters of it in
the search field, and select Search.
Matching stations are displayed.
To listen to a station, select it, and Listen.
Internet radio settings
Press
, and select Music > Radio > Internet
To save a station to your favourites, select it, and
radio > Options > Settings.
Options > Add to Favourites.
To select the default access point to connect to the
network, select Default access point and from the
available options. SelectAlways ask if you want the
device to ask for the access point every time you
open the application.
To make another search, select Options > Search
again.
Station directory
Press
, and select Radio > Internet radio >
Station directory.
To change the connection speeds for different
The station directory is maintained by Nokia. If you connection types, select from the following:
want to listen to internet radio stations outside the
directory, add station information manually or
browse for station links on the internet with the
Web application.
● GPRS connection bitrate — for GPRS packet
data connections
● 3G connection bitrate — for 3G packet data
connections
Select how you want the available stations to be
● Wi-Fi connection bitrate — for WLAN
connections
sorted:
85
Music folder
The quality of the radio broadcast depends on the
selected connection speed. The higher the speed,
the better the quality. To avoid buffering, use the
highest quality only with high speed connections.
86
Camera
You can send imagesandvideoclipsinamultimedia
message, as an e-mail attachment, or byusing other
connection methods, such as Bluetooth
About the camera
Your Nokia N79 has two cameras. The main, high-
resolution camera, is on the back of the device. The
secondary, lower resolution camera is on the front.
You can use both cameras to capture images and
record videos.
Your device supports an image capture resolution
of 2592x1944 pixels. The image resolution in this
guide may appear different.
The images and video clips are saved in Photos.
See "Photos", p. 99. The produced images are in
the JPEG format. Video clips are recorded in the
MPEG-4 file format with the .mp4 file extension, or
in the 3GPP file format with the .3gp file extension
(sharing quality). See "Video settings", p. 97.
To free memory for new images and video clips,
USB data cable, for example, and remove the files
from your device. The device informs you when the
memory is full. You can then free up memory in the
current storage or change the memory in use.
connectivity or a wireless LAN connection. You can
also upload them to a compatible online album. See
" Share images and videos online ", p. 107.
Activate the camera
To activate the main camera, open the lens cover.
To activate the main camera when the lens cover is
already open and the camera is active in the
background, press and hold the capture key.
To close the main camera, close the lens cover.
Keep a safe distance when using the flash. Do not
use the flash on people or animals at close range.
Do not cover the flash while taking a picture.
87
Camera
7 — GPS signal indicator. See "Location
information", p. 90.
Image capture
Still image camera indicators
Active toolbar
The still image camera viewfinder displays the
following:
The active toolbar provides you with shortcuts to
different items and settings before and after
capturing an image or recording a video. Scroll to
items, and select them by pressing the scroll key.
Youcan also definewhentheactivetoolbarisvisible
on the display.
The settings in the active toolbar return to the
default settings after you close the camera.
To view the active toolbar before and after
capturing an image or recording a video, select
Options > Show toolbar. To view the active
toolbar only when you need it, select Options >
Hide toolbar. To activate the active toolbar when
it is hidden, press the scroll key. The toolbar is
visible for 5 seconds.
1 — Capture mode indicator
2 — Active toolbar (not displayed during image
capture). See "Active toolbar", p. 88.
3 — Battery charge level indicator
4 — Image resolution indicator
In the active toolbar, select from the following:
5 — Image counter (the estimated number of
images you can capture using the current image
quality setting and memory)
to switch between the video mode and the
image mode
to select the scene
6 — The device memory ( ) and memory card (
)
indicators, which show where images are saved
to switch the video light on or off (video mode
only)
88
Camera
to select the flash mode (images only)
Capture images
to activate the self-timer (images only). See "You
When capturing an image, note the following:
in the picture—self-timer", p. 92.
● Use both hands to keep the camera still.
to activate the sequence mode (images only).
See "Capture images in a sequence", p. 92.
● The quality of a digitally zoomed image is lower
than that of a nonzoomed image.
to select a colour effect
● The camera goes into the battery saving mode if
there are no keypresses for a moment. To
continue capturing images, press the capture
key.
to show or hide the viewfinder grid (images
to adjust white balance
To capture an image, do the following:
to adjust the exposure compensation (images
only)
1. If the camera is in the video mode, select the
image mode from the active toolbar.
to adjust sharpness (images only)
to adjust contrast (images only)
2. To lock the focus on an object, press the capture
key halfway down (main camera only, not
available in landscape or sport scene. See "Active
toolbar", p. 88.). A green locked focus indicator
appears on the display. If the focus was not
locked, a red focus indicator appears. Release
the capture key, and press it halfway down
again. You can also capture an image without
to adjust light sensitivity (images only)
The icons change to reflect the current setting.
See "After taking a picture", p. 90. See "After
recording a video", p. 95. The active toolbar in
Photos has different options. See "Active
toolbar", p. 101.
89
Camera
3. To capture an image,
press the capture key.
Do not move the
To add location information to all captured
material, in Camera, select Options > Settings >
Record location > Yes.
device before the
Location information indicators at the bottom of
image is saved and the
final image appears on
the screen.
the display:
●
— Location information unavailable. GPS
stays on in the background for several minutes.
If a satellite connection isfoundandtheindicator
To zoom in or out when
capturing an image, use
the zoom key in your device.
To activate the front camera, select Options > Use
secondary camera. To capture an image, press the
scroll key. To zoom in or out, scroll up or down.
changes to
within that time, all the images
and video captured during that time are tagged
based on the received GPS positioning
information.
●
— Location information is available. Location
information is added to the file details.
To leave the camera open in the background and
See "Still image camera settings", p. 96.
use other applications, press
. To return to the
camera, press and hold the capture key.
Files with location information are indicated by
in the Photos application.
Location information
After taking a picture
You can automatically add capture location
information to the file details of the captured
material. For example, in the Photosapplicationyou
can then view the location where an image was
captured.
After you take a picture, select from the following
options in the active toolbar (available only if Show
captured image is enabled in the still image
camera settings):
● If you do not want to keep the image, select
Delete ( ).
90
Camera
● To send the image using a multimedia message,
e-mail, or other connection methods, such as
Bluetooth connectivity, press the call key, or
select Send ( ). See "Write and send
messages", p. 129.
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not
use the flash on people or animals at close range.
Do not cover the flash while taking a picture.
If you are in a call, select Send to caller ( ).
The camera of your device has a dual LED flash for
● To add the image to an album, select Add to
low light conditions.
album
Select the desired flash mode from the active
toolbar: Automatic ( ), Red-eye ( ), On ( ), and
Off ( ).
● To view information about the image, select
Details
● To send the image to a compatible online album,
select
Scenes
account for an album). See " Share images and
Scenes are only available in the main camera.
videos online ", p. 107.
A scene helps you to find the right colour and
lighting settings for the current environment. The
settings of each scene have been set according to a
certain style or environment.
To zoom in an image after taking it, select
Options > Go to Photos to open the image, and
use the zoom key on the side of your device.
To use the image as wallpaper in the active standby
The default scene in the image mode is Auto, and
in the video mode Automatic (both indicated with
).
Options > Assign to contact.
To change the scene, in the active toolbar, select
To return to the viewfinder to capture a new image,
Scene modes and a scene.
press the capture key.
91
Camera
To make your own scene suitable for a certain
environment, scroll to User defined, and select
Options > Change. In the user defined scene you
can adjust different lighting and colour settings. To
copy the settings of another scene, select Based on
scene mode and the desired scene. To save the
changes and return to the scenes list, press Back.
To activate your own scene, scroll to User
images, select Cancel. The number of images taken
depends on the available memory.
The captured images are shown in a grid on the
display. To view an image, press the scroll key. If you
used a time interval, only the last captured image is
shown on the display. You can view the other
images in the Photos application.
You can also use the sequence mode with the self-
defined, press the scroll key, and select Select.
timer.
To return to the sequence mode viewfinder, press
the capture key.
Capture images in a sequence
The sequence mode is available only in the main
camera.
To switch off the sequence mode, in the active
toolbar, select Sequence mode > Single shot.
To set the camera to capture images in sequence (if
enough memory is available), in the active toolbar,
select Sequence mode.
To start capturing images in a quick sequence,
selectBurst, and press and hold the capturekey. The
device captures images until you release the key or
You in the picture—self-timer
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you
can include yourself in the picture.
until the memory runs out. If you press the capture To set the self-timer delay, in the active toolbar,
key briefly, the device captures six image in a
sequence.
select Self timer > 2 seconds, 10 seconds, or 20
seconds.
To capture two or more images in defined intervals, To activate the self-timer, select Activate. The
select the desired time interval. To capture the
images, press the capture key. To stop capturing
device beeps when the timer is running and the
quadrangle blinks just before the image capture.
92
Camera
The camera takes the picture after the selected
delay elapses.
camera, or the subject, when these conditions
cannot be met. Move the camera closer to the object
to take clearer portraits.
To switch off the self-timer, in the active toolbar,
Depth
select Self timer > Off.
Tip: In the active toolbar, select Self timer >
2 seconds to keep your hand steady when
taking a picture.
When shooting landscapes and sceneries, add
depth to your pictures by placing objects in the
foreground. If the foreground object is too close to
the camera, it may be blurred.
Tips on taking good photographs
Lighting conditions
Picture quality
Changing the source, amount, and direction of light
can change photographs dramatically. Here are
some typical lighting conditions:
Use the appropriate picture quality. The camera has
several picture quality modes. Use the highest
setting to make sure that the camera produces the
best picture quality available. Note however, that
better picture quality requires more storage space.
For multimedia message (MMS) and e-mail
● Light source behind the subject. Avoid placing
your subject in front of a strong light source. If
the light source is behind the subject or visible in
the display, the resulting picture may have weak
contrast, may be too dark, and may contain
unwanted light effects.
attachments it may be necessary to use the smallest
picture quality mode optimised for MMS sending.
You can define the quality in the camera settings.
See "Still image camera settings", p. 96.
● Sidelit subject. Strong side light gives a dramatic
effect but may be too harsh, resulting in too
much contrast.
● Light source in front of the subject. Harsh
sunlight may cause the subjects to squint their
eyes. The contrast may also be too high.
Background
Use a simple background. For portraits and other
pictures with people, avoid having your subject in
front of a cluttered, complex background that may
distract attention from the subject. Move the
93
Camera
● Optimal lighting is found in situations where
6 — Video quality indicator. To change this setting,
there is plenty of diffused, soft light available, for select Options > Settings > Video quality.
example, on a bright, partially cloudy day or on
7 — Video clip file type
8 — Available recording time. When you are
recording, the current video length indicator also
shows the elapsed and remaining time.
Video recording
9 — The location to which the video clip is saved.
Video capture indicators
10 — GPS signal indicator. See "Location
The video viewfinder displays the following:
information", p. 90.
To display all viewfinder indicators, select
display only the video status indicators, and during
the recording, the time remaining, zoom bar when
zooming, and the selection keys.
Record videos
1. If the camera is in the image mode, select the
video mode from the active toolbar.
1 — Capture mode indicator
2. To start recording, press the capture key. The red
2 — Video stabilisation on indicator See "Video
settings", p. 97.
3 — Audio mute on indicator
recording and do not press any key within one
minute, the recording stops.
4 — Active toolbar (not displayed during recording).
See "Active toolbar", p. 88.
5 — Battery charge level indicator
94
Camera
To zoom in or out of the subject, use the zoom
key in your device.
4. To stop recording, press the capture key. The
video clip is automatically saved in Photos. The
maximum length of a video clip is approximately
30 seconds with sharing quality and 90 minutes
with other quality settings.
To activate the front camera, select Options > Use
secondary camera. To start recording a video,
press the scroll key. To zoom in or out, scroll up or
down.
messages", p. 129. See "Send data using
Bluetooth connectivity", p. 47. This option is not
available during a call. You may not be able to
send video clips saved in the MPEG-4 file format
in a multimedia message.
You can also send the video clip to a person you
are talking to. Select Send to caller ( ) (only
available during a call).
● To add the video clip to an album, select Add to
album
● To view information about the video clip, select
Details
After recording a video
● To upload the video clip to a compatible online
an account for a compatible online album). See "
Share images and videos online ", p. 107.
After you record a video clip, select from the
following options in the active toolbar (available
only if Show captured video is set to On in the
video settings):
● To return to the viewfinder to record a new video
● To immediately play the video clip you just
clip, press the capture key.
recorded, select Play ( ).
● If you do not want to keep the video, select
Camera settings
Delete ( ).
There are two kinds of settings for the camera:
setup settings and main settings. The setup settings
return to the default settings after you close the
camera, but the main settings remain the same
● To send the video clip using a multimedia
message, e-mail, or other connection methods,
such as Bluetooth connectivity, press the call key,
or select Send ( ). See "Write and send
95
Camera
until you change them again. To adjust the setup
settings, use the options in the active toolbar. See
"Colour and lighting settings", p. 96. To change
the main settings, in the image or video mode,
select Options > Settings.
allows the zoom increments to be smooth and
continuous between digital and extended digital
zoom, On (paused) allows the zoom increments
to pause at the digital and extended digital step
point, and Off allows a limited amount of zoom
while retaining the image resolution. Use the
extended zoom only when getting closer to the
subject is more important than the final image
quality. The overall quality of a digitally zoomed
image is always lower than that of an unzoomed
image.
Still image camera settings
To change the main settings, in the image mode,
● Image quality — Set the resolution (main
camera only). The better the image quality, the
more memory the image consumes.
● Capture tone — Set the tone that sounds when
you capture an image.
● Add to album — Save the image to an album in
Photos.
● Memory in use — Select where to store your
images.
● Record location — To add GPS location
coordinates to each image file, select Yes.
ReceivingaGPSsignalmaytaketimeorthesignal
may not be available. See "Location
● Rotate image — Select whether you want
images that are captured when the device is held
upright to be rotated when you open them in
Gallery.
information", p. 90.
● Restore camera settings — Restore the camera
settings to default values.
view the captured image after it is taken or to
continue image capturing immediately.
● Default image name — Define the default
name for the captured images.
Colour and lighting settings
In the active toolbar, select from the following:
● Extended digital zoom — The setting is only
available in the main camera. On (continuous)
● Flash mode ( ) (image only) — Select the
desired flash mode.
96
Camera
● Colour tone ( ) — Select a colour effect.
● Switch video light on or Switch video light off
— Switch the video light on or off (video mode
only).
The setup settings are shooting-mode specific.
Switching between the modes does not reset the
defined settings.
The setup settings return to the default settings
● White balance ( ) — Select the current
lighting condition. This allows the camera to
reproduce colours more accurately.
when you close the camera.
If you select a new scene, the colour and lighting
settings are replaced by the selected scene. You can
change the setup settings after selecting a scene if
needed.
● Exposure compensation ( ) (image only) — If
you are shooting a dark subject against a very
light background, such as snow, adjust the
exposure to +1 or +2 to compensate for the
background brightness. For light subjects
against a dark background, use -1 or -2.
● Sharpness ( ) (image only) — Adjust the
sharpness of the image.
Video settings
To change the main settings, in the video mode,
select Options > Settings and from the following:
● Video quality — Set the quality of the video clip.
Select Sharing, if you want to send the video clip
using a multimedia message. The clip is recorded
with QCIF resolution, in 3GPP format, and the size
is limited to 300 kB (approximately 30 seconds).
You may not be able to send video clips saved in
the MPEG-4 format in a multimedia message.
● Record location — To add GPS location
coordinates to each file, select Yes. Receiving the
GPS signal may take time or the signal may not
be available. See "Location information", p. 90.
● Video stabilisation — Reduce the effects of the
camera shaking when recording a video.
● Contrast ( ) (image only) — Adjust the
difference between the lightest and darkest
parts of the image.
● Light sensitivity ( ) (image only) — Increase
the light sensitivity in low light conditions to
avoid too dark images.
The screen display changes to match the settings
you make.
The available settings vary depending on the
selected camera.
97
Camera
● Audio recording — Select whether to record
sound.
● Add to album — Add the recorded video clip to
an album in Photos.
● Show captured video — Select to view the first
frame of the recorded video clip after the
recording stops. To view the entire video clip,
select Play from the active toolbar (main camera)
or Options > Play (secondary camera).
● Default video name — Enter the default name
for captured video clips.
● Memory in use — Select where you want to
store your video clips.
● Restore camera settings — Restore the camera
settings to default values.
98
Photos
To copy or move files to another memory location,
select a file, Options > Move and copy, and from
the available options.
About Photos
Press
, select Photos and from the following:
● Captured — to show all the photos and videos
you have taken
View images and videos
● Months — to show photos and videos
categorised by the month they where taken
● Albums — to show the default albums and those
you have created
Press
, select Photos and one of the following:
● All — View all images and videos.
● Captured — View images captured and video
● Downloads — View downloaded video clips and
video clips saved in Video centre.
● Tags — to show tags you have created for each
item
● Downloads — to show items and videos
downloaded from the web or received via MMS
or email
Images and video clips can also be sent to you in a
multimedia message, as an e-mail attachment, or
through Bluetooth connectivity. To be able to view
a received image or video clip in Photos, you must
first save it.
● All — to view all items
● Share online — to post photos or videos to the
web
Files stored on your compatible memory card (if
inserted) are indicated with
.
To open a file, press the scroll key. Video clips open
and play in Video centre. See "Nokia Video
Centre", p. 116.
99
Photos
for later printing, select Options > Add to
The images and
albumPrint later.
video clip files are
in a loop and
ordered by date
View and edit file details
and time. The
number of files is
To view and edit image or video properties, select
displayed. To
Options > Details and from the following:
browse the files
"Tags", p. 102.
one by one, scroll
left or right. To browse files in groups, scroll up or
down. Or, if the Navi wheel setting is activated, to
browse the files, slide your finger on the rim of the
scroll key.
● Description — To add a free-form description
of the file, select the field.
● Location — This field displays the GPS location
information, if available.
To open a file, press the scroll key. When an image
opens, to zoom in the image, press the zoom key on
the side of your device. The zooming ratio is not
stored permanently.
● Title — This field contains a thumbnail image of
the file and the current file name. To edit the
name, select the field.
● Albums — Displays in which albums the current
file is located.
To edit a video clip or an image, select Options >
Edit. See "Edit images", p. 104.
● Resolution — Displays the size of the image in
pixels.
To see where an image marked with
was
captured, select Options > Show on map.
● Usage rights — Select View to view the DRM
rights of this file. See "Licences", p. 158.
To print your images on a compatible printer, or to
store them on a compatible memory card (if
inserted) for printing, select Options > Print. See
"Image print", p. 105. To move images to an album
100
Photos
To hide the toolbar, select Options > Hide icons.
To activate the active toolbar when it is hidden,
press the scroll key.
Organise images and videos
You can organise files in Photos as follows:
Select from the following:
● To view items in the Tags view, add tags to
them.See "Tags", p. 102.
to play the selected video clip
to send the selected image or video clip
● To view items by months, select Months.
● To create an album to store items, select
to upload the selected image or video clip to a
compatible online album (only available if you have
set up an account for a compatible online album).
See " Share images and videos online ", p. 107.
Albums > Options > New album.
To add an image or a video clip to an album in
Photos, select the item and Add to album from the
active toolbar. See "Albums", p. 101.
to add the selected item to an album
To delete an image or video clip, select the image
to manage tags and other properties of the
and Delete from the active toolbar.
selected item
to delete the selected image or video clip
Active toolbar
The active toolbar is available only when you have
Albums
With albums, you can conveniently manage your
images and video clips. To view the albums list in
Photos, select Albums in the main view.
In the active toolbar, scroll up or down to different
items, and select them by pressing the scroll key.
The available options vary depending on the view
you are in and whether you have selected an image
or a video clip.
To create a new album in the albums view, select
Options > New album.
To add a picture or a video clip to an album in
Photos, scroll to a picture or video clip, and select
101
Photos
Options > Add to album. A list of albums opens.
Select the album to which you want to add the
picture or video clip. The item you added to the
album is still visible in Photos.
To remove a file from an album, open the album,
scroll to the file, and select Options > Remove
from album.
assigned to. Select a tag to view all the images
associated with the tag.
To assign a tag to an image, select an image and
select Options > Add tags.
To remove an image from a tag, open a tag and
select Options > Remove from tag.
Slide show
Tags
To view your images as a slide show, select an
image and Options > Slide show > Start > Play
forwards or Play backwards to start the slide
show. The slide show starts from the selected file.
Use tags to categorize media items in Photos. You
can create and delete tags in Tag manager. Tag
manager shows the tags currently in use and the
number of items associated with each tag.
To view only the selected images as a slide show,
select Options > Mark/Unmark > Mark to mark
images, and Options > Slide show > Start >
Play forwards or Play backwards to start the slide
show.
To open Tag manager, select an image or video clip
and select Options > Details > Tag manager.
To create a tag, select Options > New tag.
To view the list in most frequently used order, select
Select from the following:
Options > Most used.
● Continue — to resume the slide show, if paused
To view the list in alphabetical order, select
● End — to close the slide show
Options > Alphabetical.
To browse the images, scroll left or right.
To see the tags you have created, select Tags in the
Photos main view. The size of the tag name
corresponds to the number of items the tag is
102
Photos
Before starting the slide show, adjust theslide show 1. Connect a Nokia Video Connectivity Cable to the
settings. Select Options > Slide show >
video input of a compatible TV.
Settings, and from the following:
2. Connect the other end of the Nokia Video
Connectivity Cable to the Nokia AV Connector of
your device.
● Music — to add sound to the slide show.
● Song — to select a music file from the list
● Delay between slides — to adjust the tempo
of the slide show
3. You may need to select the cable mode.
4. Press
, select Gallery and browse for the file
● Transition — to make the slide show move
smoothly from one slide to another, and zoom in
and out in the images randomly
you want to view.
The images are
shown in the
To adjust the volume during the slide show, use the
image viewer,
and the video
clips are played
in Video centre.
volume key in your device.
TV-out mode
All audio,
To view the captured images and video clips on a
compatibleTV, useaNokiaVideoConnectivityCable.
including the
active calls, stereo video clip sound, key tone, and
ringing tone is routed to the TV when the Nokia
Video Connectivity Cable is connected to the device.
You can use the device microphone normally.
Before viewing the images and video clips on TV,
you may need to configure the TV-out settings for
the applicable TV system and TV aspect ratio. See
"Enhancement settings", p. 177.
For all applications other than the folders in
Photos, the TV screen displays what is displayed on
the screen of your device.
You cannot use the TV as the camera viewfinder in
TV-out mode.
To watch images and video clips on TV, do the
following:
The opened image is displayed in full-screen on the
TV. When you open an image in the thumbnail view
103
Photos
while it is viewed on the TV, zooming in is not
available.
resolution; and add effects, text, clip art, or a frame
to the picture.
When you open a highlighted video clip, Video
centre starts playing the video clip on the device
display and the TV screen. See "RealPlayer
", p. 157.
Crop image
To crop an image, select Options > Apply
effect > Crop, and a predefined aspect ratio from
You can view images as a slide show on TV. All items the list. To crop the image size manually, select
in an album or marked images are displayed on the Manual.
If you select Manual, a cross appears in the upper
"Slide show", p. 102.
left corner of the image. Use the scroll key to select
The quality of the TV image may vary due to
the area to crop, and select Set. Another cross
appears in the lower right corner. Again select the
area to be cropped. To adjust the first selected area,
select Back. The selected areas form a rectangle
that forms the cropped image.
different resolution of the devices.
If you select a predefined aspect ratio, select the
upper left corner of the area to be cropped. To resize
the highlighted area, use the scroll key. To freeze
the selected area, press the scroll key. To move the
area within the picture, use the scroll key. To select
the area to be cropped, press the scroll key.
Edit images
Image editor
To edit the pictures after taking them or the ones
already saved in Photos, select Options > Edit. The
image editor opens.
Reduce red-eye
To open a grid where you can select different edit
Apply effect . You can crop and rotate the image;
adjust the brightness, colour, contrast, and
To reduce red-eye in an image, select Options >
Apply effect > Red eye reduction.
104
Photos
Move the cross onto the eye, andpress thescroll key. To edit video clips in Photos, scroll to a video clip,
A loop appears on the display. To resize the loop to select Options > Edit, and from the following:
fit the size of the eye, use the scroll key. To reduce
the redness, press the scroll key. When you have
finished editing the image, press Done.
● Merge — to add an image or a video clip to the
beginning or the end of the selected video clip
● Change sound — to add a new sound clip, and
to replace the original sound in the video clip.
● Add text — to add text to the beginning or the
end of the video clip
To save the changes and return to the previous
view, press Back.
● Cut — to trim the video and mark the sections
Useful shortcuts
you want to keep in the video clip
You can use the following shortcuts when editing
images:
To take a snapshot of a video clip, in the cut video
view, select Options > Take snapshot. In the
thumbnail preview view, press the scroll key, and
select Take snapshot.
● To view a full-screen image, press *. To return to
the normal view, press * again.
● To rotate an image clockwise or
counterclockwise, press 3 or 1.
Print images
● To zoom in or out, press 5 or 0.
● To move on a zoomed image, scroll up, down,
Image print
left, or right.
To print images with Image print, select the image
you want to print, and the print option in Photos,
camera, image editor, or image viewer.
Edit videos
Use Image print to print your images using a
compatible USB data cable, or Bluetooth
connectivity. You can also print images using
wireless LAN. If a compatible memory card is
The video editor supports .3gp and .mp4 video file
formats, and .aac, .amr, .mp3, and .wav audio file
formats. It does not necessarily support all features
of a file format or all the variations of file formats.
105
Photos
inserted, you can store the images to the memory
card, and print them using a compatible printer.
You can only print images that are in .jpeg format.
The pictures taken with the camera are
automatically saved in .jpeg format.
Print preview
After you select the printer, the selected images are
displayed using predefined layouts.
To change the layout, scroll left or right to browse
through the available layouts for the selected
printer. If the images do not fit on a single page,
scroll up or down to display the additional pages.
Printer selection
To print images with Image print, select the image
and the print option in Photos, camera, image
editor, or image viewer.
Print settings
The available options vary depending on the
capabilities of the printing device you selected.
When you use Image print for the first time, a list of
available compatible printers is displayed. Select a
printer. The printer is set as the default printer.
To set a default printer, select Options > Default
printer.
To use a printer compatible with PictBridge,
connect the compatible data cable before you select
the printoption, and check thatthe datacable mode
is set to Image print or Ask on connection. See
"USB", p. 50. The printer is automatically displayed
when you select the print option.
To select the paper size, select Paper size, the size
of paper from the list, and OK. Select Cancel to
return to the previous view.
Print online
If the default printer is not available, a list of
With Print online, you can order prints of images
online directly to your home or to a store where you
can pick them up. You can also order different
products with the selected image, such as mugs or
mouse pads. The available products depend on the
service provider.
available printers is displayed.
To change the default printer, select Options >
Settings > Default printer.
106
Photos
For more information on the application, see the
guides available at the Nokia product support pages
or your local Nokia website.
To upload a file from Photos to the online service,
press
, and select Photos. Select an album, scroll
to the desired file, and select Options > Send >
Post to web, or select the file and from the active
toolbar.
For more information on the application and
compatible service providers, see the Nokia product
support pages or your local Nokia website.
Share images and videos
online
You can share images and video clips in compatible
online albums, weblogs, or in other compatible
online sharing services on the web. You can upload
content, save unfinished posts as drafts and
continue later, and view the content of the albums.
The supported content types may vary depending
on the service provider.
To share images and videos online, you must have
an account with an online image sharing service.
You can usually subscribe to such a service on the
web page of your service provider. Contact your
service provider for more information.
Using this service may involve the transmission of
large amounts of data through your service
provider's network. Contact your service provider
for information about data transmission charges.
The recommended connection method is WLAN.
107
Gallery
To access your images, video clips, and songs, or
Files stored on your compatible memory card (if
store and organise sound clips and streaming links, inserted) are indicated with
.
press
, and select Applications > Media >
To open a file, press the scroll key. Video clips, RAM
files, and streaming links open and play in Video
centre, and music and sound clips in Music player.
To copy or move files to the memory card (if
inserted) or to device memory, select a file and
Gallery.
Main view
Press
, and select Applications > Media >
Gallery, and from the following:
● Photos
— to view images and videos in
Photos. See "About Photos", p. 99.
● Video clips — to view videos in Video centre
player", p. 71.
Sounds
This folder contains all the sounds you have created
with the Recorder application or downloaded from
the web.
● Sound clips
— to listen to sound clips
● Streaming links
streaming links
— to view and open
To listen to sound files, press
, select
Applications > Media > Gallery > Sound clips
scroll key.
● Presentations
— to view presentations
You can browse and open folders and copy and
move items to folders. You can also create albums
and copy and add items to albums. See
"Albums", p. 101.
To fast-forward or rewind, scroll right or left.
108
Gallery
To download sounds, select the download link.
To rotate the image 90 degrees clockwise or
counterclockwise, press 1 or 3, respectively. To
rotate the image 45 degrees, press 7 or 9.
To switch between full and normal screen, press *.
Streaming links
To open streaming links, press
, and select
Applications > Media > Gallery > Streaming
links. Select a link, and press the scroll key.
To add a new streaming link, select Options >
New link.
Presentations
With presentations, you can view SVG (scalable
vector graphics) files, such as cartoons and maps.
SVG images maintain their appearance when
printed or viewed with different screen sizes and
resolutions.
To view SVG files, press
, and select
Applications > Media > Gallery >
Presentations. Scroll to an image, and select
Options > Play. To pause playing, select
Options > Pause.
To zoom in, press 5. To zoom out, press 0.
109
Home network
stored in your Nokia N79 using a DLNA certified
home stereo system, controlling the playlists and
volume levels directly from your Nokia N79. You can
also view images captured with the camera of your
Nokia N79 on a compatible TV screen, all controlled
with the Nokia N79 over WLAN.
The home network uses the security settings of the
WLAN connection. Use the home network feature in
a WLAN infrastructure network with a WLAN access
point device and encryption enabled.
About home network
Your device is compatible with Universal Plug and
Play (UPnP) and certified by Digital Living Network
Alliance (DLNA). You can use a wireless LAN (WLAN)
access point device or a WLAN router to create a
home network. Then you can connect compatible
UPnP devices that support WLAN to the network.
Compatible devices may be your mobile device, a
compatible PC, sound system, or television, or a
compatible wireless multimediareceiverconnected
to a sound system or a television.
To use the WLAN function of your device in a home
network, you must have a working WLAN home
connection setup and have other UPnP enabled
home devices to connect to the same home
network. See "Wireless LAN", p. 43.
You can share and synchronise media files in your
mobile device with other compatible UPnP devices
using the home network. To enable the home
network functionality and manage the settings,
press
, and select Tools > Connectivity >
Home media. You can also use the home network
to view, play, and copy compatible media files to
and from your mobile device. See "View and share
media files", p. 113.
After setting up your home network you can share
photos, music, and video with your friends and
family at home. You are also able to store your
media to a media server or retrieve media files from
a compatible home server. You can play music
Your device is connected to the home network only
if you accept a connection request from another
compatible device, or select the option to view,
110
Home network
for other devices.
accept connection requests from an unknown
device.
If you use WLAN in a network that does not have
encryption, switch off sharing your files with other
devices, or do not share any private media files. See
"Settings for home network", p. 111.
Important security
information
When you configure your WLAN home network,
enable an encryption method on your access point
device, then on the other devices you intend to
connect to your home network. Refer to the
Settings for home network
To share media files saved in Photos with other
UPnP compatible and DLNA certified devices
through WLAN, you must create and configure your
WLAN home internet access point, then configure
the settings for home network in the Home media
application. See "WLAN internet access
secret and in a safe place separate from the devices.
You can view or change the settings of the WLAN
internet access point in your device. See "Access
points", p. 186.
points", p. 45.See "Connection settings", p. 185.
If you use the ad hoc operating mode to create a
home network with a compatible device, enable
one of the encryption methods in WLAN security
mode when you configure the internet access
point. See "Connection settings", p. 185. This step
reduces the risk of an unwanted party joining the
ad hoc network.
The options related to home network are not
available in applications before the settings in the
Home media application have been configured.
When you access the Home media application for
the first time, the setup wizard opens and helps you
define the home network settings for your device.
To use the setup wizard later, in the Home media
main view, select Options > Run wizard, and
follow the instructions on the display.
to connect to it and the home network. Do not
111
Home network
To connect a compatible PC to the home network,
on the PC, you must install the related software. You
get the software from the CD-ROM or DVD-ROM
supplied with your device, or you can download it
from the device support pages on the Nokia
website.
Set sharing on and define
content
Select Tools > Connectivity > Home media >
Share content and from the following:
● Contentsharing — Allow or deny sharing media
files with compatible devices. Do not set content
sharing on before you have configured all the
other settings. If you set content sharing on, the
other UPnP compatible devices in the home
network can view and copy your files you have
selected for sharing in Images & video, and use
playlists you have selected in Music. If you do not
want the other devices to access your files, set
content sharing off.
Configure settings
To configure the settings for home network, select
Tools > Connectivity > Home media >
Options > Settings and from the following:
● Home access point — Select Always ask if you
want the device to ask for the home access point
every time you connect to the home network,
Create new to define a new access point that is
used automatically when you use the home
network, or None. If your home network does
not have WLAN security settings enabled, you get
a security warning. You can continue and switch
the WLAN security on later; or cancel defining the
access point and first switch on the WLAN
security. See "Access points", p. 186.
● Images & video — Select media files for sharing
with other devices, or view the sharing status of
images and videos. To update the content of the
folder, select Options > Refresh content.
● Music — Select playlists for sharing with other
devices, or view the sharing status and content
of playlists. To update the content of the folder,
select Options > Refresh content.
● Device name — Enter a name for your device
that is shown to the other compatible devices in
the home network.
● Copy to — Select the memory where you want
to save copied media files.
112
Home network
Show media files stored in the other device
View and share media files
To show media files that are stored on another
home network device in your device (or in a
compatible TV, for example), do the following:
To share your media files with other UPnP
compatible devices in the home network, set
content sharing on. See "Set sharing on and define
content", p. 112. If content sharing is off in your
device, you can still view and copy the media files
stored in another home network device if it is
allowed by the other device.
1. Press
, and select Tools > Connectivity >
Home media > Browse home. Your device
starts the search of other compatible devices.
Device names start to appear on the display.
2. Select a device from the list.
Show media files stored in your device
3. Select the type of media you want to view from
the other device. The available file types depend
on the features of the other device.
To show your images, videos, and sound clips in
another home network device, such as a compatible
To search files with different criteria, select
Options > Find. To sort the found files, select
Options > Sort by.
1. In Photos, select an image or a video clip; or in
Gallery, select a sound clip, and Options >
Show via home network.
4. Select the media file or folder you want to view.
2. Select a compatible device in which the media
file is shown. The images are shown both in the
other home network device andyourdevice, and
the video clips and sound clips are played only
in the other device.
5. Press thescroll key, andselect Play or Show, and
On device or Via home network.
6. Select the device in which you want to show the
file.
To adjust the volume when playing a video or sound
clip, scroll left or right.
To stop sharing the media file, select Back or Stop
(available when playing videos and music).
113
Home network
Tip: You can print images saved in Photos
that your mobile device is within range of your
home WLAN and the home network has been set up.
through a home network with a UPnP
compatible printer. See "Image
print", p. 105. Content sharing does not have
to be switched on.
To set up home synchronisation, select
>
Tools > Connectivity > Home media > Home
sync, and complete the wizard.
To run the wizard later, in Home synchronisation
Copy media files
main view, select Options > Run wizard.
To manually synchronise content in your mobile
device with content in your home devices, select
Sync now.
To copy or transfer media files from your device to
another compatible device, such as a UPnP
compatible PC, select a file in Photos and Options >
Move and copy > Copy to home network or
Move to home net.. Content sharing does not have
to be switched on.
Synchronisation settings
To change the synchronisation settings, select
Options > Synchronisation settings, and from
the following:
To copy or transfer files from the other device to
your device, select a file in the other device and the
desired copying option from the options list.
Content sharing does not have to be switched on.
● Synchronisation — Set automatic or manual
synchronisation.
● Source devices — Select the source devices for
synchronisation.
Home synchronisation
● Memory in use — View and select the memory
used.
Synchronise media files
● Memory manager — To be informed when the
device is running out of memory, select Ask
when full.
You can synchronise the media files in your mobile
device with those in your home devices. Make sure
114
Home network
To browse files in a specific category in your device,
Define incoming files
select a file type and Options > Show files.
To define andmanage lists for incoming mediafiles,
To create a predefined or customised list for
press
, and select Tools > Connectivity >
incoming files, select Options > New list.
Home media > Home sync > From home >
Options > Open.
To change the priority order of the lists, select
Options > Change priority. Select the list you
want to move andGrab, move the list to the new
location, and select Drop to place it there.
To define the kinds of files you want to transfer to
your device, select them from the list.
To edit the transfer settings, select Options >
Edit and from the following:
Define outgoing files
● List name — Enter a new name for the list.
● Shrink images — Shrink images to save
memory.
To specify which types of files in your device to
synchronise with your home media devices and
how to synchronise them, press
, and select
● Amount — Define the maximum number or
total size of the files.
Tools > Connectivity > Home media > Home
sync > To home > Options > Open. Select the
media type, Options, corresponding settings, and
from the following:
● Starting with — Define the download order.
● From — Define the date of the oldest file you
want to download. Only available for images and
video clips.
● Target devices — Select target devices to
synchronise with or disable synchronisation.
● Keep on phone — Select Yes to keep the media
content in your device after synchronisation.
With images, you can also select whether to keep
the original or a scaled version of it in your
device. Selecting the original size consumes
more memory.
● Until — Define the date of the latest file you
want to download. Only available for images and
video clips.
For music files you can also specify the genre, artist,
album, and track you want to download, and the
source device used for downloading.
115
Nokia Video Centre
download and stream video clips over the air from
compatible internet video services using packet
data or WLAN. You can also transfer video clips from
a compatible PC to your device and view them in
Video Centre.
Using packet data access points to download videos
may involve the transmission of large amounts of
data through your service provider's network.
Contact your service provider for information about
data transmission charges.
With Nokia Video Centre (network service), you can 2. To connect to a service,
select Video directory
and the desired video
service from the service
catalogue.
Tip: You can access
the video services on
the TV & video tile in
the multimedia
menu.
View a video clip
Your device may have predefined services.
Service providers may provide free content or
charge a fee. Check the pricing in the service or from
the service provider.
To browse the content of
installed video services, select Video feeds.
To select a video clip, use the scroll key. The content
of some video services is divided into categories; to
browse video clips, select a category. To search for
a video clip in the service, select Video search.
Search may not be available in all services.
View and download video
clips
To view information about the selected video clip,
Connect to video services
select Options > Video details.
1. Press
, and select Video centre.
116
Nokia Video Centre
Some video clips can be streamed over the air, but
others must be first downloaded to your device. To
download a video clip, select Options >
Video feeds
The content of the installed video services is
distributed using RSS feeds. You can view and
manage your feeds in Video feeds.
Download. Downloads continue in the background
if you exit the application. The downloaded video
clips are saved in My videos. To stream a video clip
or view a downloaded one, select Options >
Play. When the video clip is playing, to control the
video player, use the scroll key and the selection
keys. To adjust the volume, press the volume key.
To check your current feed subscriptions, select
Options > Feed subscriptions.
To refresh the content of all feeds, select Options >
Refresh feeds.
To subscribe to new feeds, select Options > Add
feed. Select Via Video directory to select a feed
from the services in the video directory, or Add
manually to add a video feed address.
Schedule downloads
Setting the application to download video clips
automatically may involve the transmission of large
amounts of data through your service provider's
network. Contact your service provider for
information about data transmission charges. To
schedule an automatic download for video clips in
a service, select a category and Options >
Schedule downloads. Video centre automatically
downloads new video clips daily at the time you
define.
To view the videos available in a feed, scroll to it,
and press the scroll key.
To view information about a video, select
Options > Feed details.
To update the contents of the current feed, select
Options > Refresh list.
To manage your account options for a given feed, if
To cancel scheduled downloads for a category,
available, select Options > Manage account.
selectManualdownload as the download method.
To remove a feed from your subscriptions, select
Options > Remove feed. You may not be able to
remove some preinstalled feeds.
117
Nokia Video Centre
My videos
Transfer videos from your PC
My videos is a storage place for all videos in the
Video centre application. You can list downloaded
videos and video clips recorded with the device
Transfer your own video clips to Video centre from
compatible devices using a compatible USB data
cable. Video centre will display only the video clips
camera in separate views. To open My videos, press which are in a format supported by your device.
, and select Video centre > My videos.
1. To view your device on a PC as a mass memory
device where you can transfer any data files,
make the connection with a USB data cable.
To open folders and view video clips, use the scroll
key. To control the video player when the video clip
is playing, use the scroll key and the selection keys.
To adjust the volume, press the volume key.
2. Select Mass storage as the connection mode. A
compatible memory card needs to be inserted in
the device.
To turn sound on or off, select Options > Mute or
Unmute.
3. Select the video clips you want to copy from your
PC.
To view file details, select Options > Video
4. Transfer the video clips to E:\My Videos in the
details.
memory card.
To play a downloaded video clip in the home
network, select Options > Show via home
network. Home network must be configured first.
See "About home network", p. 110.
The transferred video clips appear in the My
videos folder in Video centre. Video files in other
folders of your device are not displayed.
To move video clips to other folders in your device,
select Options > Move to folder.
Video centre settings
Settings and from the following:
To create a new folder, select New folder.
In the Video centre main view, select Options >
To move video clips to a compatible memory card,
select Options > Move to memory card.
118
Nokia Video Centre
● Video service selection — Select the video
services you want to appear in Video centre. You
can also view the details of a video service.
● Default access points — Select Always ask or
User-defined to choose the access points used
for the data connection. Using packet data access
points to download files may involve the
transmission of large amounts of data through
your service provider's network. Contact your
service provider for information about data
transmission charges.
● Parental control — Activate the parental lock
for video services, if the service provider has set
age limits for videos.
● Thumbnails — Select whether to download and
view thumbnail images in video feeds.
119
N-Gage
All N-Gage services, where connection to N-Gage
servers is required, such as game file downloading,
game purchase, online games, multiplayer gaming,
creating a player name, chat, and messaging,
involve transmission of large amounts of data.
About N-Gage
N-Gage is a mobile gaming platform available for a
range of compatible Nokia mobile devices. You can
access N-Gage games, players, and content through
the N-Gage application on your device. You can also
download games and access some features on your
computer at www.n-gage.com.
With N-Gage, you can download and buy games,
and play them by yourself or with friends. You can
download game trials to try out new games, and
buy the ones you like. N-Gage also provides a way
to keep in touch with other players, and to track and
share your scores and other gaming achievements.
You can also use WLAN if available. You also need
the connection to access online features such as
downloading games, game licenses, multiplayer
gaming, or chat. You also need the connection to
participate in online or multiplayer games, or to
send messages to other players.
Your service provider will charge for data transfer.
For more information about data transfer plans,
contact your mobile service provider.
N-Gage views
The N-Gage application consists of five different
parts.
Home opens when you start the N-Gage
application. You can start playing or resume the
game you played last, check your current N-Gage
points, find more games, read your messages, or
connect with an N-Gage friend who is available to
play.
In My games, you can play and manage games
you have downloaded to your device. You can install
and delete games, rate and review games you have
120
N-Gage
played, and recommend them to your N-Gage
friends.
In My profile, you can manage your profile
information and details, and keep a record of your
N-Gage gaming history.
In Myfriends, you can invite otherN-Gage players
to your friends list, and see if they are online and
available to play. You can also send messages to
your N-Gage friends.
In Showroom, you can find information about
N-Gage games, including screenshots and player
reviews. You can also try out new games by
downloading game trials, or enhance your gaming
experience with game extras for games already on
your device.
also need a player name to transfer your profile
details and N-Gage points to another device.
When you start the N-Gage application and connect
to the N-Gage service for the first time, you are
prompted to create an N-Gage player name. You can
connect to the network, for example, by setting
your availability by selecting Options > Set
Availability > Available to Play.
If you already have an N-Gage player name, select I
have an account, and enter your user name and
password to log in.
To create a new player name:
1. Select Register New Account.
2. Enter your date of birth, desired player name,
and password. If the player name is already in
use, N-Gage suggests a list of available similar
names.
Get started
3. To register your player name, enter your details,
read and accept the terms and conditions, and
select Register.
Create a player name
You can download, purchase, and play games
without a player name, but creating one is
recommended. A player name enables you to
participate in the N-Gage community, connect with
other players, and share your gaming
You can also create your player name on the N-Gage
website at www.n-gage.com.
When you have created a player name, edit your
settings and personal information in the private tab
in My profile.
achievements, recommendations, and reviews. You
121
N-Gage
Data transfer charges may apply for player name
creation on your device.
Play and manage games
To play and manage the games downloaded and
installed on your device, select My Games. The
games are sorted by the last-played date with the
most recent first.
Start a game
To start playing the game you last played, go to
Home, and select Start Game.
There are five possible types of games in My games:
To resume a paused game, select Options >
● Full games — These are games you have
purchased with a full licence. There may be
several licence types available, depending on the
game and your region.
Resume Game.
Track your progress
To view your current N-Gage points, go to Home,
● Trial games — These are full game files to which
you have access only for a limited time or which
have limited content. When the trial expires, you
must purchase a licence to unlock the full game
and select Track My Progress.
Play with friends
To connect with N-Gage players on your friends list
and to invite them to a game, select Play With
Friends. N-Gage suggests a friend to play with
based on your previous gaming history and the
availability of your N-Gage friends.
● Demo games — These are smaller sections of the
game with only a very limited set of features and
levels. These games are marked with a demo
banner.
To find a different friend to play with, select
● Full expired — These are games that you have
purchased with a limited licence, which is now
expired. These games are marked with a clock
and an arrow.
Options > View My Friends.
This item is not displayed if your friends list is
empty. See "Connect with other players", p. 123.
● Not available — These are full games which you
have removed, or which you have downloaded
122
N-Gage
but the installation was not completed. These
games are shown as unavailable in the games
list. Also, games installedon thememorycardare
shown as unavailable when the memory card has
been removed.
If a game extra has been downloaded but not fully
installed, the respective game graphic is also
unavailable and the game cannot be played until
the game extra has been installed.
● Device Model — The model number of your
device. This is defined automatically and cannot
be edited.
● Show Location — Select whether to display
your city and country in your public profile. You
can change your location in the private tab.
After you update your profile, log in to the service
with your player name to ensure that the changes
you made to your profile are synchronised with the
N-Gage server.
Edit profile details
Connect with other players
To edit your public profile details, select Options >
Edit Profile, open the public tab, and select from
the following:
To connect with other N-Gage players and to
manage your Friends list, go to My friends. You can
search for a particular N-Gage player, invite them to
your Friends list, and then see which of your friends
are online and available to play. You can also send
and receive private messages and game
recommendations.
● Icon — Add an image to represent you. When
you change the icon, N-Gage shows a list of all
the images in your device Gallery that can be
used as the icon. Select the image you want from
the list, or use the search to find it.
● Motto — Add a short personal message. To edit
the text, select Change.
Find and add friends
● Favorite Game(s) — Enter the names of your
favourite games.
To invite an N-Gage player to your friends list, enter
the player's player name to the Add a Friend field
in the friends list. Add a message to the invitation,
if needed. To send the invitation, select Send. If the
123
N-Gage
player accepts the invitation, the player appears on a player a rating from one to five stars. The rating
your friends list.
If you do not have any N-Gage friends and want to
meet other players, go to N-Gage Arena at www.n-
gage.com, and visit the chatrooms and forums.
you give affects the player’s reputation in the
community.
Send messages
In My Friends, you can exchange private messages
with players in your Friends List. If your Friend is
currently logged in to the N-Gage service, the Friend
can respond to your message and you can chat one-
on-one, similar to instant messaging.
View friend information
To view information about a friend, such as the
played games, scroll to the player on your friends
list. You must be online and connected to the N-
Gage service to see the current online status of your
friends.
To view new messages received from an N-Gage
Friend, scroll to the friend on your Friends list, and
select Options > View Message. Read messages
are deleted automatically when you exit N-Gage.
To view Game recommendations, select Options >
View Recommendation. Game recommendations
are deleted automatically a week after you receive
them.
The indicator next to the player name shows the
friend’s availability.
You can send private messages to your N-Gage
friends even if you are unavailable or offline.
Sort the friends list
To send a message to a N-Gage Friend, scroll to the
Friend on your Friends List, and select Options >
Send Message. The maximum size of a Private
Message is 115 characters. To send the message,
select Submit.
To sort your friends by availability, player name, or
N-Gage points, select Options > Sort Friends By.
You need a GPRS, 3G, or wireless LAN connection to
To rate a player, scroll to the player on your friends
be able to use the messaging feature. Data transfer
list, and selectOptions > Rate Player. Youcan give
124
N-Gage
charges may apply. For more information, contact
your mobile service provider.
credit card number, for faster purchasing in the
future.
N-Gage settings
To change your N-Gage settings, select Options >
Edit Profile and scroll to the Private tab. To edit the
settings throughout the N-Gage application, select
Options > N-Gage Settings.
Select from the following:
● Player Name — You can edit the Player Name
only until you log in to the network for the first
time. After that, you cannot edit it.
● Personal Settings — You can define personal
details, which are not shown in your public
profile, and subscribe to the N-Gage newsletter.
You can also define whether you want to receive
notifications from your N-Gage Friends while you
are playing games.
● Connection Settings — You can allow N-Gage
to connect to the network automatically when
needed, and define your preferred access point
and the data transfer limit that triggers an alert.
● Account Details — Your purchase preferences.
When you purchase a game, you are asked if you
want to save your billing details, including your
125
Messaging
Only devices that have compatible features can
receive and display multimedia messages. The
appearance of a message may vary depending on
the receiving device.
or view your previously retrieved e-mail
messages offline.
●
●
Drafts — Draft messages that have not been
sent are stored here.
Sent — The last messages that have been
sent, excluding messages sent using Bluetooth
connectivity, are stored here. You can change the
number of messages to save in this folder.
Outbox — Messages waiting to be sent are
temporarily stored in the outbox, for example,
when your device is outside network coverage.
Reports — You can request the network to
send you a delivery report of the text messages
and multimedia messages you have sent
(network service).
Messaging main view
Press
, and select Messaging (network service).
●
●
To create a new message, select New message.
Messaging contains the following folders:
●
Inbox — Received messages, except e-mail
and cell broadcast messages, are stored here.
My folders — Organise your messages into
folders.
●
To enter and send service requests (also known as
USSD commands), such as activation commands for
network services, to your service provider, select
Options > Service commands in the Messaging
main view.
Tip: To avoid rewriting messages that you
send often, use texts in the Templates folder
in My folders. You can also create and save
your own templates.
●
New mailbox — Connect to your remote
Cell broadcast (network service) allows you to
mailbox to retrieve your new e-mail messages,
receive messages on various topics, such as
126
Messaging
weather or traffic conditions, from your service
provider. For available topics and relevant topic
numbers, contact your service provider. In the
Messaging main view, select Options > Cell
broadcast.
If the next letter is located on the same key as the
present one, wait until the cursor appears (or scroll
right to end the time-out period), and enter the
letter.
To insert a space, press 0. To move the cursor to the
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent
cell broadcast reception.
next line, press 0 three times.
Predictive text input
With predictive input, you can enter any letter with
a single keypress. Predictive text input is based on
a built-in dictionary to which you can add new
words.
Write text
Your device supports traditional text input and
predictive text input. With predictive text, you can
enter any letter with a single keypress. Predictive
text input is based on a built-in dictionary to which
you can add new words.
1. To turn predictive text input on or off in the
general settings, press
, and select Tools >
Settings > General > Personalisation >
Language > Predictive text.
When you write text,
is displayed when you
2. To write the desired word, press the keys 2–9.
Press each key only once for one letter. For
example, to write "Nokia" when the English
dictionary is selected, press 6 for N, 6 for o, 5 for
k, 4 for i, and 2 for a.
write text using traditional text input and
when using predictive text input.
Traditional text input
Press a number key (1–9) repeatedly until the
desired character appears. There are more
characters available for a number key than are
printed on the key.
The word suggestion changes after each
keypress.
127
Messaging
3. When you finish writing the word correctly,
scroll right to confirm it, or press 0 to add a
space.
use predictive text input, press 1, and then *
repeatedly.
To open a list of special characters, press and hold
If the word is not correct, press * repeatedly to
view the matching words the dictionary has
found one by one.
*.
Tip: To select several special characters from
the special characters list, press 5 after each
highlighted character.
If the ? character is shown after the word, the
word is not in the dictionary. To add a word to
the dictionary, select Spell, enter the word using
traditional text input, and select OK. The word is
added to the dictionary. When the dictionary is
full, a new word replaces the oldest added word.
Change the writing language
When you are writing text, you can change the
writing language. For example, if you are writing
text using a non-Latin alphabet and want to write
Latin characters, such as e-mail or web addresses,
you may need to change the writing language.
4. Start writing the next word.
Tips on text input
To change the writing language, select Options >
Writing language and a writing language that
uses Latin characters.
After changing the writing language, for example,
if you press 6 repeatedly to reach a specific
character, changing the writing language gives you
access to characters in a different order.
To insert a number in the letter mode, press and
hold the desired number key.
To switch between the different character modes,
press #.
To delete a character, press C. To delete more than
one character, press and hold C.
The most common punctuation marks are available
Edit text and lists
under 1. To scroll them through one by one, if you
use traditional text input, press 1 repeatedly. If you To copy and paste text, while pressing and holding
#, scroll left or right to highlight text. To copy the
128
Messaging
text to the clipboard, while still holding #, select
Copy. To insert the text into a document, press and
hold #, and select Paste.
The wireless network may
limit the size of MMS
messages. If the inserted
picture exceeds this limit
the device may make it
smaller so that it can be
sent by MMS.
Check the size limit of e-
mail messages with your
service provider. If you
attempt to send an e-mail
message that exceeds the
To mark an item in a list, scroll to it, and press #.
To mark multiple items in a list, press and hold #
while you scroll up or down. To end the selection,
stop scrolling, and release #.
Write and send messages
Press
, and select Messaging.
Before you can create a multimedia message or
write an e-mail, you must have the correct
connection settings in place. See "Define the e-mail
settings", p. 132.
size limit of the e-mail server, the message is left in
the Outbox folder, and the device attempts to
resend it periodically. Sending an e-mail requires a
data connection, and continuous attempts to
resend the e-mail may increase your phone bill. In
the Outbox folder, you can delete such a message,
or move it to the Drafts folder.
1. Select New message > Message to send a text
or multimedia message (MMS), Audio
message to send a multimedia message that
includes one sound clip, or E-mail to send an e-
mail message.
2. In the To field, press the scroll key to select
recipients or groups from contacts, or enter the
129
Messaging
recipient’s phone number or e-mail address. To 8. To send the message, select Options > Send,
add a semicolon (;) that separates the recipients,
or press the call key.
press *. You can also copy and paste the number
or address from the clipboard.
Note: The message sent icon or text on your
device screen does not indicate that the message is
received at the intended destination.
Your device supports text messages beyond the
limit for a single message. Longer messages are
sent as twoor more messages. Yourserviceprovider
may charge accordingly. Characters with accents or
other marks, and characters from some language
options, take up more space, and limit the number
of characters that can be sent in a single message.
You may not be able to send video clips that are
saved in the MP4 file format or that exceed the size
limit of the wireless network in a multimedia
message.
3. In the Subject field, enter the subject of the e-
mail. To change the fields that are visible, select
Options > Message header fields.
4. In the message field, write the message. To
insert a template or note, select Options >
Insert > Insert text > Template, or Note.
5. To add a media object to a multimedia message,
select Options > Insert content, the object
type or source, and the desired object. To insert
a business card, slide, note, or some other file to
the message, select Options > Insert
content > Insert other.
6. To capture an image or record a video clip or
sound for a multimedia message, select
Options > Insert > Insert image > New,
Insert video clip > New, or Insert sound
clip > New.
Tip: You can combine images, video, sound,
and text to a presentation and send it in a
multimedia message. Start to create a
multimedia message, and select Options >
Insert > Insert presentation. The option is
shown only if MMS creation mode is set to
Guided or Free. See "Multimedia message
settings", p. 135.
7. To add an attachment to an e-mail, select
Options and the attachment type. E-mail
attachments are indicated by
.
130
Messaging
When you open a multimedia message ( ), you
may see an image and a message. is shown if
Messaging inbox
sound is included, or
if video is included. To play
Receive messages
the sound or the video, select the indicator.
To see the media objects that have been included
in the multimedia message, select Options >
Objects.
If the message includes a multimedia presentation,
is displayed. To play the presentation, select the
indicator.
Press
, and select Messaging > Inbox.
In the Inbox folder, indicates an unread text
message, an unread multimedia message,
an
unread audio message, and
data received
through Bluetooth connectivity.
When you receive a message,
and 1 new
message are shown in the standby mode. To open
the message, select Show. To open a message in
Inbox, scroll to it, and press the scroll key. To reply
to a received message, select Options > Reply.
Data, settings, and web service
messages
Your device can receive many kinds of messages
that contain data, such as business cards, ringing
tones, operator logos, calendar entries, and e-mail
notifications. You may also receive settings from
your service provider or company information
management department in a configuration
message.
Multimedia messages
Important: Exercise caution when opening
messages. Messages may contain malicious
software or otherwise be harmful to your device or
PC.
You may receive a notification that a multimedia
message is waiting in the multimedia message
centre. To start a packet data connection to retrieve
the message to your device, select Options >
Retrieve.
To save the data from the message, select
Options and the corresponding option.
Web service messages are notifications (for
example, news headlines) and may contain a text
131
Messaging
message or a link. For availability and subscription,
contact your service provider.
Mailbox
Define the e-mail settings
Message reader
Tip: To define your mailbox settings, press
, and select Messaging > Mailboxes.
With Message reader you can listen to text,
multimedia, and audio messages and e-mail.
To use e-mail, you must have a valid internet access
point (IAP) in the device and define your e-mail
settings correctly. See "Access points", p. 186. See
"E-mail settings", p. 136.
To change the message reading settings in the
"Speech ", p. 174.
You must have a separate e-mail account. Follow
the instructions given by your remote mailbox and
internet service provider (ISP).
If you select New mailbox in the Messaging main
view and have not set up your e-mail account, you
are prompted to do so. To start creating the e-mail
settings with the mailbox guide, select Start.
To listen to new messages or e-mail, in the standby
mode, press and hold the left selection key until
Message reader starts.
To listen to messages from your Inbox or e-mail
from your Mailbox, select a message and Options >
Listen. To stop the reading, press the end key.
To pause and continue the reading, press the scroll
key. To skip to the next message, scroll right. To
replay the current message or e-mail, scroll left. To
skip to the previous message, scroll left in the
beginning of the message. To adjust the volume,
scroll up or down.
To view the current message or e-mail in text
format without the sound, select Options >
View.
When you create a new mailbox, the name you give
to the mailbox replaces New mailbox in the
Messaging main view. You can have up to six
mailboxes.
Open the mailbox
Press
, and select Messaging and a mailbox.
132
Messaging
When you open the mailbox, the device asks if you 1. When you have an open connection to a remote
want to connect to the mailbox (Connect to
mailbox, select Options > Retrieve e-mail >
New to retrieve all new messages, Selected to
retrieve all messages from the mailbox.
mailbox?).
To connect to your mailbox and retrieve new e-mail
headings or messages, select Yes. When you view
messages online, you are continuously connected
to a remote mailbox using a data connection.
To stop retrieving messages, select Cancel.
2. To close the connection and view the e-mail
messages offline, select Options >
Disconnect.
To view previously retrieved e-mail messages
offline, select No.
3. To open an e-mail message, press the scroll key.
If the e-mail message has not been retrieved and
you are offline, you are asked if you want to
retrieve this message from the mailbox.
To create a new e-mail message, select New
message > E-mail in the Messaging main view or
Options > Create message > E-mail in your
mailbox. See "Write and send messages", p. 129.
To view e-mail attachments, open the message, and
select the attachment field indicated by . If the
indicator is unavailable, the message has not been
retrieved to the device; select Options >
Retrieve.
To retrieve e-mail messages automatically, select
Options > E-mail settings > Automatic
retrieval. See "Automatic retrieval
settings", p. 138.
Press
, and select Messaging and a mailbox.
If you are offline, select Options > Connect to start
a connection to the remote mailbox.
Important: Exercise caution when opening
messages. Messages may contain malicious
software or otherwise be harmful to your device or
PC.
Setting the device to retrieve e-mail automatically
may involve the transmission of large amounts of
data through your service provider's network.
133
Messaging
Contact your service provider for information about
data transmission charges.
Disconnect from the mailbox
When you are online, to end the data connection to
the remote mailbox, select Options >
Disconnect.
Delete e-mail messages
Press
, and select Messaging and a mailbox.
To delete the contents of an e-mail message from
the device while still retaining it in the remote
mailbox, select Options > Delete. In Delete e-
mail from:, select Phone only.
View messages on a SIM card
Press
, and select Messaging.
Before you can view SIM messages, you must copy
The device mirrors the e-mail headings in the
remote mailbox. Although you delete the message
content, the e-mail heading stays in your device. If
you want to remove the heading as well, you must
first delete the e-mail message from your remote
mailbox, then make a connection from your device
to the remote mailbox again to update the status.
To delete an e-mail from the device and the remote
mailbox, select Options > Delete > Phone and
server.
them to a folder in your device.
1. In the Messaging main view, select Options >
SIM messages.
2. Select Options > Mark/Unmark > Mark or
Mark all to mark messages.
3. Select Options > Copy. A list of folders opens.
4. To start copying, select a folder and OK. To view
the messages, open the folder.
To cancel deleting an e-mail from the device and
server, scroll to an e-mail that has been marked to
be deleted during the next connection , and
select Options > Restore.
Messaging settings
The settings may be preconfigured in your device,
or you may receive them in a message. To enter
settings manually, fill in all fields marked with Must
be defined or an asterisk.
134
Messaging
Some or all message centres or access points may
be preset for your device by your service provider,
to convert text messages into these other
formats.
and you may not be able to change, create, edit, or ● Preferred connection — Select the connection
remove them.
to use.
● Reply via same centre — Select whether you
want the reply message to be sent using the
same text message centre number (network
service).
Text message settings
Press
, and select Messaging > Options >
Settings > Text message.
Select from the following:
Multimedia message settings
● Message centres — View a list of all text
message centres that have been defined.
● Message centre in use — Select which message
centre to use to deliver text messages.
Press
, and select Messaging > Options >
Settings > Multimedia message.
Select from the following:
● Character encoding — To use character
conversion to another encoding system when
available, select Reduced support.
● Image size — Define the size of the image in a
multimedia message.
● MMS creation mode — If you select Guided, the
device informs you if you try to send a message
that may not be supported by the recipient. If you
select Restricted, the device prevents you from
sending messages that may not be supported. To
include content in your messages without
notifications, select Free.
● Receive report — Select whether the network
sends delivery reports on your messages
(network service).
● Message validity — Select how long the
message centre resends your message if the first
attempt fails (network service). If the message
cannot be sent within the validity period, the
message is deleted from the message centre.
● Message sent as — Contact your service
provider to learn if your message centre is able
● Access point in use — Select which access point
is used as the preferred connection.
● Multimedia retrieval — Select how you want
to receive messages. To receive messages
135
Messaging
automatically in your home cellular network,
cannot be sent within this time period, the
message is deleted from the message centre.
select Auto in home netw.. Outside your home
cellular network, you receive a notification that
there is a message to retrieve in the multimedia
message centre.
E-mail settings
Manage mailboxes
Outside your home cellular network, sending and
Press
, and select Messaging > Options >
receiving multimedia messages may cost you more.
Settings > E-mail.
If you select Multimedia retrieval > Always
automatic, your device automatically makes an
active packet data connection to retrieve the
message both in and outside your home cellular
network.
To select which mailbox you want to use to send e-
mail, select Mailbox in use and a mailbox.
To remove a mailbox and its messages from your
device, select Mailboxes, scroll to the desired
mailbox, and press C.
To create a new mailbox, in Mailboxes, select
Options > New mailbox. The name you give to
the new mailbox replaces New mailbox in the
Messaging main view. You can have up to six
mailboxes.
● Allow anonymous msgs. — Select whether you
want to reject messages from an anonymous
sender.
● Receive adverts — Define whether you want to
receive multimedia message advertisements.
● Receive reports — Select whether you want the
status of the sent message to be shown in the log
(network service).
Select Mailboxes and a mailbox to change the
connection settings, user settings, retrieval
settings, and automatic retrieval settings.
● Deny report sending — Select whether you
want to prevent your device from sending
delivery reports of received messages.
● Message validity — Select for how long the
message centre resends your message if the first
attempt fails (network service). If the message
Connection settings
Press
, and select Messaging > Options >
Settings > E-mail > Mailboxes, a mailbox, and
Connection settings.
136
Messaging
To edit the settings for the e-mail you receive, select To edit the settings for the e-mail you send, select
Incoming e-mail, and from the following:
Outgoing e-mail and from the following:
● User name — Enter your user name given to you ● My e-mail address — Enter the e-mail address
by your service provider.
given to you by your service provider.
● Password — Enter your password. If you leave
this field blank, you are prompted for the
password when you try to connect to your
remote mailbox.
● Outgoing mail server — Enter the IP address or
host name of the mail server that sends your e-
mail. You may only be able to use the outgoing
server of your service provider. Contact your
service provider for more information.
● Incoming mail server — Enter the IP address
or host name of the mail server that receives your
e-mail.
The settings for User name, Password, Access
point in use, Security, and Port are similar to the
ones in Incoming e-mail.
● Access point in use — Select an internet access
point (IAP). See "Access points", p. 186.
● Mailbox name — Enter a name for the mailbox.
● Mailbox type — Defines the e-mail protocol that
This setting cannot be changed.
User settings
Press
, and select Messaging > Options >
Settings > E-mail > Mailboxes, a mailbox, and
User settings.
Select from the following:
● Security — Select the security option used to
secure the connection to the remote mailbox.
● Port — Define a port for the connection.
● APOP secure login (for POP3 only) — Use with
the POP3 protocol to encrypt the sending of
passwords to the remote e-mail server while
connecting to the mailbox.
● My name — Enter your own name. Your name
replaces your e-mail address in the recipient’s
device when the recipient’s device supports this
function.
● Sendmessage —Define how e-mailissent from
your device. Select Immediately for the device
to connect to the mailbox when you select Send
message. If you select During next conn., e-
137
Messaging
mail is sent when the connection to the remote
Automatic retrieval settings
mailbox is available.
Press
, and select Messaging > Options >
● Send copy to self — Select whether you want
to send a copy of the e-mail to your own mailbox.
● Include signature — Select whether you want
to attach a signature to your e-mail messages.
● New e-mail alerts — Select whether you want
to receive the new e-mail indications (a tone, a
note, and a mail indicator) when new mail is
received.
Settings > E-mail > Mailboxes, a mailbox, and
Automatic retrieval.
Select from the following:
● E-mail notifications — To automatically
retrieve the headings to your device when you
receive new e-mail in your remote mailbox,
select Auto-update or Only in home netw..
● E-mail retrieval — To automatically retrieve the
headings of new e-mail messages from your
remote mailbox at defined times, select
Retrieval settings
Press
, and select Messaging > Options >
Settings > E-mail > Mailboxes, a mailbox, and
Enabled or Only in home netw.. Define when
Retrieval settings.
and how often the messages are retrieved.
Select from the following:
E-mail notifications and E-mail retrieval cannot
be active at the same time.
● E-mail retrieval — Define which parts of the e-
mail are retrieved: Headers only, Size limit
(POP3), or Msgs. & attachs. (POP3).
Setting the device to retrieve e-mail automatically
may involve the transmission of large amounts of
data through your service provider's network.
Contact your service provider for information about
data transmission charges.
● Retrieval amount — Define how many new e-
mail messages are retrieved to the mailbox.
● IMAP4 folder path (for IMAP4 only) — Define
the folder path for folders to be subscribed.
● Folder subscriptions (for IMAP4 only)
— Subscribe to other folders in the remote
mailbox, and retrieve content from those folders.
Web service message settings
Press
, and select Messaging > Options >
Settings > Service message.
138
Messaging
Select whether you want to receive service
messages. If you want to set the device to
automatically activate the browser and start a
network connection to retrieve content when you
receive a service message, select Download
messages > Automatically.
Other settings
Press
, and select Messaging > Options >
Settings > Other.
Select from the following:
● Save sent messages — Select whether you
want to save a copy of the text messages,
multimedia messages, or e-mail that you send to
the Sent folder.
Cell broadcast settings
Check the available topics and related topic
numbers with your service provider.
● Number of saved msgs. — Define how many
sent messages are saved to the sent folder at a
time. When the limit is reached, the oldest
message is deleted.
Press
, and select Messaging > Options >
Settings > Cell broadcast.
Select from the following:
● Memory in use — Select the memory where you
want to save your messages.
● Reception — Select whether you want to
receive cell broadcast messages.
● Language — Select the languages in which you
want to receive messages: All, Selected, or
Other.
● Topic detection — Select whether the device
automatically searches for new topic numbers,
and saves the new numbers without a name to
the topic list.
139
Make calls
Voice calls
Options during a call
1. In the standby mode, enter the phone number,
including the area code. To remove a number,
press C.
To adjust the volume during a call, use the volume
key on the side of your device. You can also use the
scroll key. If you have set the volume to Mute, select
Unmute first.
For international calls, press * twice for the +
character (which replaces the international
access code), and enter the country code, area
code (omit the leading zero if necessary), and
phone number.
To send an image or a video clip in a multimedia
message to the other participant of the call, select
Options > Send MMS (in UMTS networks only). You
can edit the message and change the recipient
before sending. Press the call key to send the file to
a compatible device (network service).
2. To make the call, press the call key.
3. To end the call (or to cancel the call attempt),
To put an active voice call on hold while answering
another incoming call, select Options > Hold. To
switch between the active and the held call, select
Options > Swap.
press the end key.
Pressing the end key always ends a call, even if
another application is active.
To make a call from Contacts, press
, and select
To send DTMF tone strings (for example, a
Contacts. Scroll to the desired name, or enter the
first letters of the name to the search field. To call
the contact, press the call key. If you have saved
several numbers for a contact, select the desired
number from the list, and press the call key.
password), select Options > Send DTMF. Enter the
DTMF string or search for it in Contacts. To enter a
wait character (w) or a pause character (p), press *
repeatedly. To send the tone, select OK. You can add
140
Make calls
DTMF tones to the phone number or DTMF fields in
a contact card.
To change the phone number of your voice or video
mailbox, press
, and select Tools > Utilities >
Call mailbox, a mailbox, and Options > Change
number. Enter the number (obtained from your
network service provider), and select OK.
Tip: When you have only one active voice call,
to put the call on hold, press the call key. To
activate the call, press the call key again.
During an active call, to route the sound from the
handset to the loudspeaker, select Options >
Activate loudspeaker. If you have attached a
compatible headset with Bluetooth connectivity, to
route the sound to the headset, select Options >
Activate handsfree. To switch back to the handset,
select Options > Activate handset.
Answer or decline a call
To answer the call, press the call key.
To mute the ringing tone of an incoming call, select
Silence.
If you do not want to answer a call, press the end
key. If you activate the Call divert > Voice calls >
If busy function in phone settings to divert calls,
declining an incoming call also diverts the call.
To end an active call and replace it by answering the
waiting call, select Options > Replace.
If you have several calls active, to end them all,
select Options > End all calls.
When you select Silence to mute the ringing tone
of an incoming call, you can send a text message
without rejecting the call, informing the caller that
you cannot answer the call. Select Options > Send
message. To setupthisoption andwriteastandard
text message, select Tools > Settings > Phone >
Call > Reject call with message.
Many of the options that you can use during a voice
call are network services.
Voice and video mailboxes
To call your voice or video mailbox (network
services, video mailbox available only in the UMTS
network), press and hold 1 in the standby mode,
and select Voice mailbox or Video mailbox.
Make a conference call
141
Make calls
1. Make a call to the first participant.
Speed dial a phone number
2. To make a call to another participant, select
To activate the feature, press
, and select
Options > New call. The first call is put on hold.
Tools > Settings > Phone > Call > Speed
3. When the new call is answered, to join the first
participant in the conference call, select
Options > Conference.
dialling.
To assign a phone number to one of the number
keys (2-9), press
, and select Tools > Utilities >
To add a new person to the call, repeat step 2,
and select Options > Conference > Add to
conference. Your device supports conference
calls between a maximum of six participants,
including yourself.
Speed dial. Scroll to the key to which you want to
assign the phone number, and select Options >
Assign. 1 is reserved for the voice or video mailbox,
and for starting the web browser.
To call in the standby mode, press the assigned key
To have a private conversation with one of the
participants, select Options > Conference >
Private. Select a participant, and select
and the call key.
Private. The conference call is put on hold on
your device. The other participants can still
continue the conference call. After you finish the
private conversation, select Options >
Call waiting
You can answer a call while you have another call in
progress. To activate call waiting, select Settings >
Phone > Call > Call waiting (network service).
Conference to return to the conference call.
To answer the waiting call, press the call key. The
To drop a participant, select Options >
Conference > Drop participant, scroll to the
participant, and select Drop.
first call is put on hold.
To switch between the two calls, select Swap. To
connect an incoming call or a call on hold with an
active call and to disconnect yourself from the calls,
select Options > Transfer. To end the active call,
4. To end the active conference call, press the end
key.
142
Make calls
press the end key. To end both calls, select
When you use voice dialling, the loudspeaker is in
use. Hold the device at a short distance away when
you say the voice tag.
Options > End all calls.
1. To start voice dialling, in the standby mode,
press and hold the right selection key. If a
compatible headset with the headset key is
attached, press and hold the headset key to start
voice dialling.
2. A short tone sounds, and Speak now is
displayed. Say clearly the name or nickname that
is saved on the contact card.
3. The device plays a synthesised voice tag for the
recognised contact in the selected device
language, and displays the name and number. If
you do not want to call that contact, select
Next within 2.5 seconds to view a list of other
matches or Quit to cancel voice dialling.
Voice dialling
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on
the speaker’s voice, so do not need to record voice
tags in advance. The device creates a voice tag for
the entries in contacts, and compares the spoken
voice tag to it. The voice recognition in the device
adapts to the main user’s voice to recognise the
voice commands better.
The voice tag for a contact is the name or nickname
that is saved on the contact card. To listen to the
synthesised voice tag, open a contact card, and
select Options > Voice tag details > Play voice
tag.
If several numbers are saved under the name, the
device selects the default number if it has been set.
If not, the device selects the first available number
in a contact card.
Make a call with a voice tag
Note: Using voice tags may be difficult in a
noisy environment or during an emergency, so you
should not rely solely upon voice dialling in all
circumstances.
Make a video call
When you make a video call (network service), you
can see a real-time, two-way video between you
143
Make calls
and the recipient of the call. The live video image,
or video image captured by the camera in your
device is shown to the video call recipient.
To be able to make a video call, you must have a
USIM card and be in the coverage of a UMTS network.
For availability of and subscription to video call
services, contact your network service provider.
A video call can only be made between two parties.
The video call can be made to a compatible mobile
device or an ISDN client. Video calls cannot be made
while another voice, video, or data call is active.
The secondary camera on the front is used by
default for video calls. Starting a video call may
take a while. Waiting for video image is
shown. If the call is not successful (for example,
video calls are not supported by the network, or
the receiving device is not compatible), you are
asked if you want to try a normal call or send a
text or multimedia message instead.
The video call is active when you see two video
images, and hear the sound through the
loudspeaker. The call recipient may deny video
sending ( ), in which case you only hear the
sound and may see a still image or a grey
background graphic.
Icons
You are not receiving video (the recipient is not
sending video or the network is not transmitting it).
3. To end the video call, press the end key.
You have denied video sending from your
device. To send a still image instead, select Tools >
Settings > Phone > Call > Image in video
call.
Options during a video call
To change between showing video or hearing only
Even if you denied video sending during a video call, sound, select Options > Enable, or Disable and
the call is still charged as a video call. Check the
pricing with your service provider.
the desired option.
To use the main camera to send video, select
Options > Use main camera. To switch back to
the secondary camera, select Options > Use
secondary camera.
1. To start a video call, enter the phone number in
the standby mode, or select Contacts and a
contact.
2. Select Options > Call > Video call.
144
Make calls
To take a snapshot of the video you are sending,
To answer the video call, press the call key. Allow
select Options > Send snapshot. Video sending is video image to be sent to caller? is displayed. To
paused and the snapshot is shown to the recipient. start sending live video image, select Yes.
The snapshot is not saved. Press Cancel to resume
If you do not activate the video call, you only hear
sending video.
the sound of the caller. A grey screen replaces the
To zoom your image in or out, select Options >
video image. To replace the grey screen with a still
image captured by the camera in your device, select
Tools > Settings > Phone > Call > Image in
video call.
Zoom.
To route the audio to a compatible headset with
Bluetooth connectivity attached to your device,
select Options > Activate handsfree. To route the To end the video call, press the end key.
audio back to the loudspeaker of your device, select
Options > Activate handset.
Video sharing
To change the video quality, select Options >
Use video sharing (network service) to send live
video or a video clip from your mobile device to
another compatible mobile device during a voice
call.
The loudspeaker is active when you activate Video
sharing. If you do not want to use the loudspeaker
for the voice call while you share video, you can also
use a compatible headset.
Video preference. Normal quality is framerate 10
fps. Use Clearer detailfor small, static details. Use
Smoother motion for moving images.
To adjust the volume during a video call, use the
volume key on the side of the device.
Answer or decline a video
call
Video sharing requirements
When a video call arrives,
is displayed.
Video sharing requires a UMTS connection. For more
information on the service, UMTS network
145
Make calls
availability, and fees associated with using this
service, contact your service provider.
Person-to-person connection settings
A person-to-person connection is also known as a
Session Initiation Protocol (SIP) connection. The SIP
profile settings must be configured in your device
before you can use video sharing. Ask your service
provider for the SIP profile settings, and save them
in your device. Your service provider may send you
the settings or give you a list of the needed
parameters.
To use video sharing you must do the following:
● Ensure that your device is set up for person-to-
person connections.
● Ensure you have an active UMTS connection and
are within UMTS network coverage. If you move
outside the UMTS network during a video sharing
session, the sharing stops while your voice call
continues.
To add a SIP address to a contact card:
1. Press
, and select Contacts.
● Ensure that both the sender and recipient are
registered to the UMTS network. If you invite
someone to a sharing session and the recipient’s
device is not within UMTS network coverage,
does not have video sharing installed, or person-
to-person connections set up, the recipient does
not receive invitations. You receive an error
message that indicates that the recipient cannot
accept the invitation.
2. Open the contact card (or start a new card for
that person).
3. Select Options > Add detail > Share video.
4. Enter the SIP address in the format
username@domainname (you can use an IP
address instead of a domain name).
If you do not know the SIP address for the
contact, you can use the phone number of the
recipient, including the country code, to share
video (if supported by the network service
provider).
Settings
To set up video sharing, you need person-to-person
and UMTS connection settings.
UMTS connection settings
To set up your UMTS connection:
146
Make calls
● Contact your service provider to establish an
Sharing beginsautomatically whenthe recipient
accepts the invitation.
agreement for you to use the UMTS network.
● Ensure that your device UMTS access point
Options during video sharing
connection settings are configured properly.
to zoom the video (available for sender only)
to adjust the brightness (available for sender
Share live video or video clips
only)
During an active voice call, select Options > Share
or
or
to mute or unmute the microphone
to switch the loudspeaker on and off
video:
1. To share live video during the call, select Live
to switch to full screen mode (available for
video.
receiver only)
To share a video clip, select Recorded clip and
3. To end the sharing session, select Stop. To end
the voice call, press the end key. When you end
the call, video sharing also ends.
the clip you want to share.
You may need to convert the video clip into a
suitableformat to be able to shareit. IfClip must
be converted for sharing. Continue? is shown,
select OK.
To save the live video you shared, select Save when
prompted. The shared video is saved in Photos.
2. Your device sends the invitation to the SIP
address. If the recipient has several SIP
addresses or phone numbers including the
country code saved in Contacts, select the
desired address or number. If the SIP address or
phone number of the recipient is not available,
enter the address or number of the recipient
including the country code, and select OK to
send the invitation.
If you access other applications while you are
sharing a video clip, the sharing is paused. To return
to the video sharing view and to continue sharing,
in the active standby mode, select Options >
Continue.
147
Make calls
Accept an invitation
Recent calls
You cannot receive invitations when you are
outside UMTS network coverage.
Press
, and select Tools > Log.
To view missed, received, and dialled voice calls,
When someone sends you a video sharing
select Recent calls. The device registers missed and
invitation, your device rings and the sender's name received calls only if the network supports these
or SIP address are displayed. To accept the
functions, the device is switched on, and within the
invitation, select Accept.
network service area.
To reject the invitation, select Reject, or press the
end key. Pressing the end key also ends the voice
call. The sender receives a message that you
rejected the invitation.
To clear all recent call lists, select Options > Clear
recent calls. To clear one of the call registers, open
the register you want to erase, and select
Options > Clear list. To clear an individual event,
open a register, scroll to the event, and press C.
When you receive a video clip, to mute the sound of
the clip, select Mute.
Call duration
To end video sharing, select Stop. Video sharing
Press
, and select Tools > Log.
also ends if the active voice call ends.
To view the approximate duration of received and
dialled calls, select Call duration.
Log
The log stores information about the
Note: The actual invoice for calls and services
from your service provider may vary, depending on
network features, rounding off for billing, taxes,
and so forth.
communication history of the device. The device
registers missed and received calls only if the
network supports these functions, the device is
switched on, and within the network service area.
To clear call duration timers, select Options >
Clear timers. For this you need the lock code.
148
Make calls
mailbox, multimedia messaging centre, or web
Packet data
pages are shown as packet data connections.
Press
, and select Tools > Log.
To add an unknown phone number from the log to
To check the amount of data sent and received
during packet data connections, select Packet
data. For example, you may be charged for your
packet data connections by the amount of data sent
and received.
your contacts, select Options > Save to Contacts.
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls
register, and messaging delivery reports
permanently, select Options > Clear log. Select
Yes to confirm. To remove a single event from one
of the recent calls logs, press C.
Monitor all communication
events
To set the log duration, select Options >
Settings > Log duration. If you select No log, all
the log contents, recent calls register, and
messaging delivery reports are permanently
deleted.
Press
, and select Tools > Log > Recent
calls.
Icons in the log are as follows:
Incoming
Tip: In the details view, you can copy a phone
number to the clipboard, and paste it into a
text message, for example. Select Options >
Use number > Copy.
Outgoing
Missed communication events
To open the general log where you can monitor all
voice calls, text messages, or data and wireless LAN
connections registered by the device, scroll right.
Subevents, such as a text message sent in morethan
one part and packet data connections, are logged
as one communication event. Connections to your
To view how much data is transferred and how long
a certain packet data connection lasts, scroll to an
incoming or outgoing event indicated by Pack., and
select Options > View details.
149
Internet calls
To connect to an internet call service, your device
must be in a network service area.
About internet calls
With the internet call service (network service), you
can make and receive calls over the internet.
Internet calls can be established between
1. To activate your internet call service, open
Contacts.
2. Scroll to the internet calls tab, and select
computers, between mobile phones, and between
a VoIP device and a traditional telephone.
Options > Activate service.
To search for available wireless LAN connections,
To be able to use the service, you must subscribe to
select Options > Search for WLAN.
the service, and have a user account.
Tip: When you have activated an internet call
service, you can make an internet call from all
applications where you can make a regular
voice call.
To make or receive an internet call, you must be in
the service area of a wireless LAN, and connected to
an internet call service.
Activate internet calls
Make internet calls
To make or receive internet calls, contact your
service provider to receive the internet call
connection settings. When the settings have been
installed, a new tab for internet calls appears in
Contacts.
When you have activated the internet call feature,
you can make an internet call from all applications
where you can make a regular voice call, such as
Contacts or the Log. For example, in Contacts, scroll
to the desired contact, and select Options > Call >
Internet call.
150
Internet calls
To make an internet call in the standby mode, enter
the phone number or internet address, and press
the call key.
To make an internet call to an internet address that
does not start with a digit, press any number key
when the device is in the standby mode, then press
# for a few seconds to clear the display and to
switch the device from the number mode to the
letter mode. Enter the internet address, and press
the call key.
Manage internet call services
To view or edit internet communication settings,
select Connectivity > Net settings and from the
following:
● Add new service — to add a new internet call
service
● Advanced settings — to view or edit advanced
call settings
Internet call settings
Blocked contacts
To view or edit internet call settings, select
Options > Contacts. Scroll to the internet calls tab,
and select Options > Settings .
Blocked contacts are prevented from seeing your
online status.
Select from the following:
To add contacts to your blocked contacts list, select
the contact and Options > Block contact.
● Service connectivity — Select the destination
settings for internet call connectivity, and edit
destination details.
To unblock a contact, scroll to it, and select
Options > Unblock. When you unblock a contact,
you allow the contact to see your online status.
To change a destination, scroll to the service, and
select Change.
To see your blocked contacts, open Contacts. Scroll
to the internet calls tab, and select Options > View
blocked list.
● Availability requests — Select whether to
automatically accept all incoming presence
requests without a confirmation query.
151
Internet calls
● Service information — To view technical
information about the selected service.
● Advanced settings — Set advanced settings for
the service, such as security settings.
152
Contacts (phonebook)
In Contacts, you can save and update contact
information, such as phone numbers, home
addresses, or e-mail addresses of your contacts. You
can add a personal ringing tone or a thumbnail
image to a contact card. You can also create contact
groups, which allow you to send text messages or
e-mail to many recipients at the same time.
Manage names and numbers
To add a contact to a group, select Options > Add
to group (shown only if you have created a group).
To check to which groups a contact belongs, select
the contact and Options > Belongs to groups.
To delete a contact card, select a card, and press C.
To delete several contact cards at the same time,
select Options > Mark/Unmark to mark the
desired contact cards, and press C to delete.
Save and edit names and
numbers
To send contact information, select a card,
1. Press
, and select Contacts > Options >
Options > Send, and the desired option.
New contact.
To listen to the voice tag assigned to the contact,
select a contact card and Options > Voice tag
details > Play voice tag.
2. Fill in the fields that you want, and select Done.
To edit contact cards, scroll to a contact, and select
Options > Edit. You can also search for the desired
contact by entering the first letters of the name to
the search field.
Default numbers and
addresses
To attach an image to a contact card, open the
contact card, and select Options > Add image. The
image is shown when the contact calls.
Press
, and select Contacts.
153
Contacts (phonebook)
You can assign default numbers or addresses to a
contact card. In this way if a contact has several
numbers or addresses, you can easily call or send a
message to the contact to a certain number or
address. The default number is also used in voice
dialling.
3. Select the ringing tone you want to use.
When a contact or group member calls you, the
device plays the selected ringing tone (if the caller’s
phone number is sent with the call and your device
recognises it).
To remove the ringing tone, select Default tone
1. In the contacts list, select a contact.
from the list of ringing tones.
2. Select Options > Defaults.
3. Select a default to which you want to add a
Copy contacts
number or an address, and select Assign.
When you open Contacts for the first time, the
device asks if you want to copy names and numbers
from the SIM card to your device.
4. Select a number or an address you want to set
as a default.
The default number or address is underlined in the
contact card.
To start copying, select OK.
If you do not want to copy the SIM contacts to your
device, select Cancel. The device asks if you want to
view the SIM contacts in the contacts directory. To
view the contacts, select OK. Contacts opens, and
you can see names stored on your SIM card marked
Add ringing tones for
contacts
Press
, and select Contacts.
with
.
To define a ringing tone for a contact or a contact
group:
1. Press the scroll key to open a contact card or go
to the groups list, and select a contact group.
2. Select Options > Ringing tone.
154
Contacts (phonebook)
When fixed dialling is activated, calls may be
SIM services
possible to the official emergency number
programmed into your device.
For availability and information on using SIM card
services, contact your SIM card vendor. This may be
the service provider or other vendor.
To view the list of fixed dialling numbers, select
Options > SIM numbers. This option is only
shown if supported by your SIM card.
SIM contacts
To add new numbers to the fixed dialling list, select
To add the names and numbers stored on the SIM
card to the contacts list in Contacts, select
Options > Settings > Contacts to display > SIM
memory. You can add and edit SIM contacts, or call
them.
Options > New SIM contact.
When you use fixed dialling, packet data
connections are not possible, except when sending
text messages over a packet data connection. For
this, the message centre number and the recipient’s
phone number must be included on the fixed
dialling list.
The numbers you save in Contacts are not
automatically saved to your SIM card. To save
numbers to the SIM card, in Contacts, select a
contact and Options > Copy > SIM memory.
Manage contact groups
Fixed dialling
Create contact groups
To restrict calls from your device to selected phone
numbers, in Contacts, select Options > Fixed dial
contacts. You need your PIN2 code to activate and
deactivate fixed dialling or edit your fixed dialling
contacts.
1. In Contacts, scroll right to open the groups list.
2. Select Options > New group.
3. Write a name for the group or use the default
name, and select OK.
4. Select the group and Options > Add
members.
155
Contacts (phonebook)
5. Scroll to a contact, and press the scroll key to
mark each contact you want to add.
6. Select OK.
To rename a group, select Options > Rename,
enter the new name, and select OK.
Remove members from a group
1. In the groups list, select the group you want to
modify.
2. Scroll to the contact, and select Options >
Remove from group.
3. To remove the contact from the group, select
Yes.
156
Media folder
● Send — Send a file using a multimedia message,
e-mail, or other connection methods, such as
Bluetooth connectivity.
RealPlayer
With RealPlayer, you can play video clips or stream
media files over the air without saving them to the
device first.
RealPlayer supports files with extensions such as .
3gp, .mp4, or .rm. However, RealPlayer does not
necessarily support all file formats or all the
variations of file formats.
● Use video — Assign a video to a contact or set
it as a ringing tone.
● Mark/Unmark — Mark items in the list to send
or delete multiple items at the same time.
● View details — View details of the selected
item, such as format, resolution, and duration.
● Settings — Edit the settings for video playback
and streaming.
Play video clips
Press
, and select Applications > Media >
Stream content over the air
RealPlayer.
Many service providers require you to use an
internet access point (IAP) for your default access
point. Other service providers allow you to use a
WAP access point.
To play a saved media file, select Video clips, a clip,
and Play.
To list previously played files, in the application
main view, select Recently played.
In RealPlayer, you can only open an rtsp:// URL
address. However, RealPlayer plays a .ram file if you
open an HTTP link to it in a browser.
To adjust the volume, use the volume key.
After you select a media file, select Options and
from the following:
157
Media folder
To stream content over the air (network service), in
RealPlayer or Photos, select a streaming link saved
in the Streaming links folder. You can also receive
a streaming link in a text message or multimedia
message, or open a link on a web page. Before live
content begins streaming, your device connects to
the site and starts loading the content. The content
is not saved in your device.
Advanced settings
To edit the advanced settings, in the settings view,
select Streaming > Network > Options >
Advanced settings.
To select the bandwidth used for a network, select
the network setting and the desired value.
To edit the bandwidth yourself, select User
defined.
RealPlayer settings
Press
, and select Applications > Media >
Adobe Flash Player
RealPlayer.
Press
, and select Applications > Media >
You may receive RealPlayer settings in a special
message from the service provider. For more
information, contact your service provider.
Select Options > Settings and from the following:
Flash Player.
Use Adobe Flash Player to view, play, and interact
with compatible flash files made for mobile devices.
To open a flash file, select it, and Open.
● Video — Select whether video clips are played
in full screen or in the normal view, and whether
the clips are automatically repeated after they
finish playing.
Licences
● Streaming — Select whether to use a proxy
server, change the default access point, and set
the port range used when connecting. Contact
your service provider for the correct settings.
To view digital rights licences, press
, and select
Applications > Media > Licences.
Digital rights management
Content owners may use different types of digital
rights management (DRM) technologies to protect
158
Media folder
their intellectual property, including copyrights.
This device uses various types of DRM software to
access DRM-protected content. With this device you device memory is formatted. You may also lose the
can access content protected with WMDRM 10, OMA activation keys and the content if the files on your
DRM 1.0, and OMA DRM 2.0. If certain DRM software device get corrupted. Losing the activation keys or
fails to protect the content, content owners may ask the content may limit your ability to use the same
that such DRM software's ability to access new DRM- content on your device again. For more
protected content be revoked. Revocation may also information, contact your service provider.
prevent renewal of such DRM-protected content
already in your device. Revocation of such DRM
software does not affect the use of content
protected with other types of DRM or the use of non-
DRM-protected content.
Digital rights management(DRM)protectedcontent
comes with an associated activation key that
defines your rights to use the content.
If your device has OMA DRM-protected content, to
back up both the activation keys and the content,
use the backup feature of Nokia Nseries PC
Suite.Other transfer methods may not transfer the
activation keys which need to be restored with the
content for you to be able to continue the use of
OMA DRM-protected content after the device
memory is formatted. You may also need to restore
the activation keys in case the files on your device
get corrupted.
Some activation keys may be connected to a specific
SIM card, and the protected content can be accessed
only if the SIM card is inserted in the device.
In the main view, select from the following:
● Valid licences — View licences that are
connected to media files or whose validity period
has not begun.
● Invalid licences — View licences that are not
valid; the time period for using the media file is
exceeded or there is a protected media file in the
device but no connected activation key.
● Not in use — View licences that have no media
files connected to them in the device.
To buy more usage time for a media file, select an
invalid licence and Options > Get new licence
(web service messages must be enabled). See "Web
service message settings", p. 138.
159
Media folder
To view details of an activation key, scroll to it, and
press the scroll key.
Recorder
Press
, and select Applications > Media >
Recorder.
With Recorder, you can record voice memos and
telephone conversations.
The recorder cannot be used when a data call or
GPRS connection is active.
To record a telephone conversation, open Recorder
during a voice call. Both parties hear a tone every 5
seconds during recording.
160
Time management
To change the time, date, and clock type settings,
Clock
select Options > Settings.
Alarm clock
To automatically update the time, date, and time
zone information to your device (network service),
in the settings, select Automatic time update >
On.
Press
, and select Applications > Clock.
To view your active and inactive alarms, scroll right
to the alarm tab. To set a new alarm, select
Options > New alarm. Define the repetition, if
World clock
needed. When an alarm is active,
is shown.
Press
, and select Applications > Clock.
To turn off the sounding alarm, select Stop. To stop
the alarm for a certain time period, select Snooze.
If your device is switched off when an alarm is due,
your device switches itself on and starts sounding
the alarm tone.
To view the time in different locations, scroll right
to the world clock tab. To add locations to the list,
select Options > Add location. You can add a
maximum of 15 locations to the list.
To set your current location, scroll to a location, and
select Options > Set as current location. The
location is displayed in the clock main view, and the
time in your device is changed according to the
selected location. Ensure that thetime is correct and
matches your time zone.
Tip: To define the time period after which the
alarm soundsagain when you setittosnooze,
select Options > Settings > Alarm snooze
time.
To cancel an alarm, select Options > Remove
alarm.
161
Time management
2. Fill in the fields. To set an alarm, select Alarm >
Calendar
On, and enter the alarm time and date.
To add a description for an entry, select
Create a calendar entry
Options > Add description.
Press
, and select Applications > Calendar.
3. To save the entry, select Done.
1. To add a new calendar
entry, scroll to the
desired date, and select
Options > New
Tip: In the day, week, or month calendar
view, press any key (1-0). An appointment
entry opens, and the characters you enter are
added to the subject field. In the to-do view,
a to-do note entry opens.
entry and one of the
following:
When the calendar alarm sounds, select Silence to
turn off the sound. The reminder text stays on the
screen. To stop the calendar alarm, select Stop. To
set the alarm to snooze, select Snooze.
● Meeting — to
remind you of an
appointment that
has a specific date
and time
Tip: To define the time period after which the
● Meeting request
calendar alarm sounds again when you set it
— to create and send a new meeting request.
You must have a mailbox set up for sending
requests. See "Manage mailboxes", p. 136.
● Memo — to write a general entry for a day
● Anniversary — to remind you of birthdays
or special dates (entries are repeated
annually)
to snooze, press
, and select
Applications > Calendar > Options >
Settings > Alarm snooze time.
Calendar views
To change the starting day of the week or the view
that is shown when you open the calendar, select
Options > Settings. In the settings, you can also
● To-do — to remind you of a task that must
be done by a specific date
162
Time management
modify the calendar alarm tone, alarm snooze time,
and the title for the week view.
To go to a certain date, select Options > Go to
date. To jump to today, press #.
To switch between the month view, week view, day
view, and to-do view, press *.
To send a calendar note to a compatible device,
select Options > Send.
If the other device is not compatible with
Coordinated Universal Time (UTC), the time
information of received calendar entries may not be
displayed correctly.
Manage calendar entries
To delete several events at a time, go to the month
view, andselect Options > Deleteentry > Before
date or All entries.
To mark a task as completed, scroll to it in the to-do
view, and select Options > Mark as done.
You can synchronise your calendar with a
compatible PC using Nokia Nseries PC Suite. When
creating a calendar entry, set the desired
synchronisation option.
163
Office folder
Quickword
Quickoffice
With Quickword, you can view Microsoft Word
documents with your device.
With the Quickoffice applications, you can
view .doc, .xls, .ppt, .pps, and .txt documents and
download software. Not all file formats or features
are supported. Apple Macintosh is not supported.
Quickword supports documents saved in .doc
and .txt formats created with Microsoft Word 97,
2000, XP, and 2003. Not all variations or features of
the file formats are supported.
To upgrade to a version of Quickword that supports
editing, when you have a file open, select
Options > Updates and upgrades. The upgrade
To view a file, press
, and select Applications >
Office > Quickoffice. Select the location from
which you want to view files, browse to the desired
folder, and select a file.
The files open in the respective applications
depending on the file format.
To download software using Quickmanager, in the
main view, select Quickmanager; or, when
browsing files, scroll to the Quickmanager tab.
Quicksheet
With Quicksheet, you can view Microsoft Excel files
with your device.
If you experience problems with the Quickoffice
applications, visit www.quickoffice.com, or send e-
mail to [email protected].
Quicksheet supports spreadsheet files in .xls format
created with Microsoft Excel 97, 2000, XP, or 2003.
Not all variations or features of the file formats are
supported.
164
Office folder
To upgrade to a version of Quicksheet that supports
editing, when you have a file open, select
Options > Updates and upgrades. The upgrade
is chargeable.
Notes
Notes.
Press
, and select Applications > Office >
To write a note, start entering the text. The note
Quickpoint
editor opens automatically.
With Quickpoint, you can view Microsoft
PowerPoint presentations with your device.
To open a note, scroll to it, and select Open.
To send a note to other compatible devices, select
Quickpoint supports presentations saved in .ppt
and .pps formats created withMicrosoft PowerPoint
2000, XP, and 2003. Not all variations or features of
the file formats are supported.
Options > Send.
To delete a note, press C.
Tip: To delete several notes, select Options >
Mark/Unmark to mark the notes, and press
To upgrade to a version of Quickpoint that supports
editing, when you have a file open, select
Options > Updates and upgrades. The upgrade
is chargeable.
C.
To synchronise or to define synchronisation
settings for a note, select Options >
Synchronisation > Start or Settings.
Quickmanager
With Quickmanager, you can download software,
including updates, upgrades, and other useful
applications. You can pay for the downloads by
phone bill or credit card.
Adobe reader
Press
, and select Applications > Office >
Adobe PDF.
With Adobe reader, you can read PDF documents
with your device; search for text in the documents;
165
Office folder
modify settings, such as zoom level and page views; currency is Home. The rate of the base currency is
and send PDF files using e-mail.
always 1.
1. Select Options > Currency rates.
2. The default name for the currency items is
Foreign. To rename a currency, select
Options > Rename currency.
Converter
Press
, and select Applications > Office >
Converter.
3. Add the exchange rates for the currencies, and
With Converter, you can convert measures from one
press Done.
unit to another.
4. In the second Unit field, select the currency to
The converter has limited accuracy, and rounding
errors may occur.
which you want to convert.
5. In the first Amount field, enter the value you
want to convert. The otherAmount field changes
automatically to show the converted value.
1. In the Type field, select the measure you want to
use.
2. In first Unit field, select the unit from which you
want to convert.
To change the base currency, select Options >
Currency rates, a currency and Options > Set as
base currency.
3. In the next Unit field, select the unit to which you
want to convert.
When you change base currency, you must enter
new exchange rates because all previously set
exchange rates are cleared.
4. In the first Amount field, enter the value you
want to convert. The otherAmount field changes
automatically to show the converted value.
Convert currency
Zip manager
Select Type > Currency. Before you can make
currency conversions, you must select a base
currency and add exchange rates. The default base
Press
, and select Applications > Office >
Zip.
166
Office folder
With Zip manager, you can create new archive files
to store compressed .zip files; add single or multiple
compressed files or directories to an archive; set,
clear, or change the archive password for protected
archives; and change settings, such as compression
level and file name encoding.
167
Applications folder
switching off the device does not clear the memory.
You can recall the last saved result the next time you
open the Calculator application.
Calculator
Press
, and select Applications > Calculator.
This calculator has limited accuracy and is designed
for simple calculations.
Application manager
To make a calculation, enter the first number of the
calculation. Select a function such as add or subtract
from the function map. Enter the second number of
the calculation, and select =.
With Application manager, you can see the software
packages installed in your device. You can view
details of installed applications, remove
applications, and define installation settings.
The calculator performs operations in the order
they are entered. The result of the calculation
remains in the editor field and can be used as the
first number of a new calculation.
To save theresults ofa calculation, select Options >
Memory > Save. The saved result replaces the
previously stored result in the memory.
Press
, and select Applications > App. mgr..
You can install two types of applications and
software to your device:
● J2ME applications based on Java technology with
the extension .jad or .jar
● Other applications and software suitable for the
Symbian operating system with the
extension .sis or .sisx
To retrieve the results of a calculation from the
memory and use them in a calculation, select
Options > Memory > Recall.
Only install software specifically designed for your
device: Nokia N79. Software providers will often
To view the last saved result, select Options > Last
result. Exiting the Calculator application or
168
Applications folder
refer to the official model number of this product:
N79-1.
● To view the application type, version number,
and the supplier or manufacturer of the
application, select Options > View details.
Install applications and software
To display the security certificate details of the
application, in Details:, scroll to Certificates:,
and select View details. See "Certificate
management", p. 180.
● If you install a file that contains an update or
repair to an existing application, you can only
restore the original application if you have the
original installation file or a full backup copy of
the removed software package. To restore the
original application, remove the application, and
install the application again from the original
installation file or the backup copy.
You can transfer installation files to your device
from a compatible computer, download them
during browsing, or receive them in a multimedia
message, as an e-mail attachment, or using other
connectivity methods, such as Bluetooth
connectivity. You can use Nokia Application Installer
in Nokia PC Suite to install an application to your
device.
Icons in Application manager indicate the
following:
.sis or .sisx application
The .jar file is required for installing Java
applications. If it is missing, the device may ask
you to download it. If there is no access point
defined for the application, you are asked to
select one. When you are downloading the .jar
file, you may need to enter a user name and
password to access the server. You obtain these
from the supplier or manufacturer of the
application.
Java application
application not fully installed
application installed in the memory card
Important: Only install and use applications
and other software from trusted sources, such as
applications that are Symbian Signed or have
passed the Java Verified testing.
To install an application or software:
Before installation, note the following:
169
Applications folder
1. To locate an installation file, press
, and
application with antivirus functionality could affect
select Applications > App. mgr.. Alternatively, performance and operation or cause the device to
search installation files using File manager, or
open a message in Messaging > Inbox that
contains an installation file.
stop functioning.
After you install applications to a compatible
memory card, installation files (.sis, .sisx) remain in
thedevicememory. Thefiles mayuselargeamounts
of memory and prevent you from storing other files.
To maintain sufficient memory, use Nokia Nseries
PC Suite to back up installation files to a compatible
PC, then use the file manager to remove the
installation files from the device memory. If the .sis
file is a message attachment, delete the message
from the Messaging inbox.
2. In Application manager, select Options >
Install. In other applications, scroll to the
installation file, and select it to start the
installation.
During installation, the device shows
information about the progress of the
installation. If you install an application without
a digital signature or certification, the device
displays a warning. Continue installation only if
you are sure of the origin and contents of the
application.
Remove applications and
software
To start an installed application, locate it in the
menu, and select it. If the application does not have
a default folder defined, it is installed in the
Applications folder in the main menu.
Press
, and select Applications > App. mgr..
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
If you remove software, you can only reinstall it if
you have the original software package or a full
backup of the removed software package. If you
remove a software package, you may no longer be
able to open documents created with that software.
To see which software packages are installed or
removed and when, select Options > View log.
Important: Your device can only support one
antivirus application. Having more than one
170
Applications folder
If another software package depends on the
software package that you removed, the other
software package may stop working. Refer to the
documentation of the installed software package
for details.
Settings
Press
, and select Applications > App. mgr..
Select Options > Settings and from the following:
● Software installation — Select whether
Symbian software that has no verified digital
signature can be installed.
● Online certificate check — Select to check the
online certificates before installing an
application.
● Default web address — Set the default address
used when checking online certificates.
Some Java applications may require that a message
be sent or a network connection be made to a
specific access point to download extra data or
components. In the Application manager main
view, scroll to an application, and select Options >
Open to change settings related to that specific
application.
171
Tools folder
To sort files, select Options > Sort by, and the
File manager
desired category.
Press
, and select Tools > File mgr..
Edit memory card
About File manager
These options are available only if a compatible
memory card is inserted in the device.
With File manager, you can browse, manage, and
open files on your device, memory card, or a
compatible external drive.
To rename or format a memory card, select
Options > Memory card options.
To map or delete drives, or to define settings for a
compatible remote drive connected to your device,
select Options > Remote drives.
To password protect a memory card,
selectOptions > Memory card password.
To remove the memory card safely without any loss
The available options depend on the memory you
of data, select Options > Remove memory card.
select.
Back up files on a memory card
Find and organise files
To back up files, select the file types you want to
back up on a memory card, and Options > Back up
now. Ensure that your memory card has enough
free memory for the files that you have chosen to
back up.
To find a file, select Options > Find. Enter a search
text that matches the file name.
To move and copy files and folders, or to create new
folders in the memory, select Options >
Organise, and the desired option.
172
Tools folder
● Synthesiser — to switch on or off the
Voice commands
synthesiser that plays recognised voice tags and
commands in the selected device language
● Playback volume — to adjust the playback
volume for the voice commands
Press
, and select Tools > Utilities > Voice
comm..
You can use enhanced voice commands to control
● Recognition sensitivity — to adjust how easily
the synthesiser recognises speech. If the
sensitivity is set too high, it may not accept
commands because of background noise.
● Command verification — to select whether the
spoken command is accepted manually, by voice,
or automatically
your device. See "Voice dialling", p. 143.
To activate enhanced voice commands to start
applications and profiles, press and hold the right
selection key in the standby mode.
To use enhanced voice commands, press and hold
the right selection key in the standby mode, and
speak a voice command. The voice command is the
name of the application or profile displayed in the
list.
● Remove voice adapts. — to reset voice
recognition learning, for example, when the
main user of the device has changed
To edit the voicecommands, in the Voicecommands
or a profile, and Edit.
Sync
Press
, and select Tools > Sync.
To listen to the synthesised voice tag, select
Sync enables you to synchronise your notes,
calendar entries, text and multimedia messages,
browser bookmarks, or contacts with various
compatible applications on a compatible computer
or on the internet.
Options > Playback.
To remove a voice command that you added
manually, select Options > Remove voice
command.
Select Options > Settings and from the following:
You may receive synchronisation settings in a
special message from your service provider.
173
Tools folder
A synchronisation profile contains the necessary
settings for synchronisation.
include connection and other settings used by
different applications in your device.
Scroll to a server profile, and select Options and
When you open the application, the default or
previously used sync profile is displayed. To modify
the profile, scroll to a sync item and select Mark to
include it in the profile or Unmark to leave it out.
from the following:
● Start configuration — Connect to the server
and receive configuration settings for your
device.
To manage sync profiles, select Options and the
● New server profile — Create a server profile.
desired option.
To delete a server profile, scroll to it, and press C.
To synchronise data, select Options >
Synchronise. To cancel synchronisation before it
finishes, select Cancel.
Speech
With Speech, you can set the language, voice, and
voice properties for the message reader.
Device manager
Press
, and select Tools > Utilities > Device
Press
, and select Tools > Utilities > Speech.
mgr..
To set the language for the message reader, select
Language. To download additional languages to
your device, select Options > Download
languages.
Use Device manager to connect to a server and
receive configuration settings for your device, to
create new server profiles, or to view and manage
existing server profiles.
Tip: When you download a new language,
you must download at least one voice for that
language.
You may receive server profiles and different
configuration settings from your service providers
and company information management
To set the speaking voice, select Voice. The voice
department. These configuration settings may
depends on the selected language.
174
Tools folder
To set the speaking rate, select Speed.
To set the speaking volume, select Volume.
To view details of a voice, scroll right to the voice
tab, scroll to the voice, and select Options > Voice
details. To listen to a voice, scroll to the voice, and
select Options > Play voice.
To delete languages or voices, scroll to the item and
select Options > Delete.
Message reader settings
To change the message reader settings, scroll to the
Settings tab, and define the following:
● Language detection — turn automatic reading
language detection on or off.
● Continuous reading — turn continuous
reading of all selected messages on or off.
● Speech prompts — select whether the message
reader inserts prompts in messages.
● Audio source — select whether you want to
listen to the message through the loudspeaker
or the device.
175
Some settings may be preset for the device by your Voice commands opens the settings for the Voice
service provider, and you may not be able to change commands application. See "Voice
them.
commands", p. 173.
Tones allows you to change the tones of the
calendar, clock, and currently active profile.
Display
General settings
In general settings, you can edit the general
settings of your device or restore the device to
original default settings.
● Light sensor — Scroll left or right to adjust the
light sensor that observes the lighting conditions
and adjusts the brightness of the display. The
light sensor may cause the display to flicker in
low light.
You can adjust time and date settings also in the
clock. See "Clock ", p. 161.
● Font size — Adjust the size of the text and icons
on the display.
Personalisation settings
● Power saver time-out — Select the time-out
period after which the power saver is activated.
● Welcome note / logo — The welcome note or
logo is displayed briefly each time you switch on
the device. Select Default to use the default
image, Text to write a welcome note, or Image
to select an image from Photos.
Press
, and select Tools > Settings >
General > Personalisation.
mode, and general functions of your device.
Themes allows you to change the look of the
display.
● Light time-out — Select a time-out after which
the backlight of the display is switched off.
176
Settings
Standby mode
● Phone language — Change the language of the
display text in your device. This also affects the
format used for date and time and the separators
used, for example, in calculations. Automatic
selects the language according to the
● Shortcuts — Assign shortcuts to the selection
keys to be used in the standby mode and select
which applications are shown in the active
toolbar.
information on your SIM card. After you change
the language, the device restarts.
If the active standby is set off, you can assign
keypad shortcuts for the different presses of the
scroll key.
● Writing language — Change the writing
language. This affects the characters available
when writing text and the predictive text
dictionary used.
● Change Menu view — Select Horizontal icon
bar to view a horizontal toolbar and the content
from different applications on the screen. Select
Vertical icon bar to view a vertical toolbar on
the screen. The content from different
applications is hidden. To display the content,
select a shortcut and press the scroll key left.
Select Basic to switch off active toolbar.
● Operator logo — This setting is only available
if you have received and saved an operator logo.
Select Off if you do not want the logo to be
shown.
● Predictive text — Set predictive text input on
or off for all editors in the device. The predictive
text dictionary is not available for all languages.
Enhancement settings
Press
, and select Tools > Settings >
General > Enhancement.
Some enhancement connectors indicate which type
of enhancement is connected to the device. See
"Display indicators", p. 27.
Language
The available settings depend on the type of
enhancement. Select an enhancement and from the
following:
Changing the settings for the phone language or
writing language affects every application in your
device until you change these settings again.
177
Settings
● Default profile — Set the profile that you want
activated each time you connect a certain
compatible enhancement to your device.
● Automatic answer — Select whether you want
the device to answer an incoming call
automatically after 5 seconds. If the ringing type
is set to Beep once or Silent, automatic answer
is disabled.
Navi wheel settings
Press
, and select Tools > Settings >
General > Navi wheel.
Navi wheel
When the Navi wheel setting is set on, you can
browse through files and lists in certain
applications by sliding your finger on the rim of the
scroll key. When the Navi wheel setting is set off, to
move up, down, left, or right, press the scroll key in
the desired direction.
● Lights — Set whether lights remain on after the
time-out.
TV-out settings
To change the settings for a TV-out connection,
Breathing
select TV-Out and from the following:
The rim around the Navi wheel illuminates slowly
● Default profile — Set the profile that you want
activated each time you connect a Nokia Video
Connectivity Cable to your device.
when the device is in sleep mode. To switch off the
illumination, press
, and select Tools >
Settings > General > Navi wheel >
● TV screen size — Select the aspect ratio of the
TV: Normal or Widescreen for widescreen TVs.
● TV system — Select the analogue video signal
system that is compatible with your TV.
Breathing.
Sensor settings
In most applications, the display rotates
● Flicker filter — To improve image quality on the
screen of your TV, select On. The flicker filter may
not diminish image flicker on all TV screens.
automatically between the portrait and landscape
modes based on the orientation of the device.
To change the setting for automatic display
rotation, select Settings > General > Sensor
178
Settings
settings > Turning control and whether you
contact a Nokia Care point or your service
want the display to rotate automatically.
provider. See "Access codes", p. 21.
Avoid using access codes similar to the
emergency numbers to prevent accidental
dialling of the emergency number.
To ensure that the automatic display rotation
works, hold the device in an upright position.
Automatic rotation does not work if you change the
display rotation setting manually in an application.
When you exit the application, automatic rotation
is activated again.
● Keypad autolock period — Select whether the
keypad is locked when your device has been idle
for a certain period of time.
Tip: To lock or unlock the keypad
manually, press the left selection key, then
*.
Security settings
Phone and SIM
● Phone autolock period — To avoid
unauthorised use, you can set a time-out after
which the device automatically locks. A locked
device cannot be used until the correct lock code
is entered. To turn off the autolock period, select
None.
Press
, and select Tools > Settings >
General > Security > Phone and SIM card and
from the following:
● PIN code request — When active, the code is
requested each time the device is switched on.
Deactivating the PIN code request may not be
allowed by some SIM cards.
Tip: To lock the device manually, press the
power key. A list of commands opens.
Select Lock phone.
● PIN code, PIN2 code, and Lock code — You can
change the PIN code, PIN2 code, and lock code.
These codes can only include the numbers from
0 to 9.
In the offline or flight profiles, you may need to
unlock the device and change to the calling profile
before making a call.
If you forget the PIN or the PIN2 code, contact
● Lock if SIM card changed — You can set the
device to ask for the lock code when an unknown
SIM card is inserted into your device. The device
your service provider. If you forget the lock code,
179
Settings
maintains a list of SIM cards that are recognised malicious software and be sure of the authenticity
as the owner’s cards.
of software when downloading and installing
software.
● Closed user group — You can specify a group
of people to whom you can call and who can call
you (network service).
Important: Even if the use of certificates
makes the risks involved in remote connections and
software installation considerably smaller, they
must be used correctly in order to benefit from
increased security. The existence of a certificate
does not offer any protection by itself; the
certificate manager must contain correct,
authentic, or trusted certificates for increased
security to be available. Certificates have a
restricted lifetime. If "Expired certificate" or
"Certificate not valid yet" is shown, even if the
certificate should be valid, check that the current
date and time in your device are correct.
When calls are limited to closed user groups, calls
may be possible to the official emergency number
programmed into your device.
● Confirm SIM services — You can set the device
to display confirmation messages when you are
using a SIM card service (network service).
Certificate management
Press
, and select Tools > Settings >
General > Security > Certificate management.
Digital certificates do not guarantee safety; they are
used to verify the origin of software.
View certificate details—check authenticity
In the certificate management main view, you can
see a list of authority certificates that are stored in
your device. Scroll right to see a list of personal
certificates, if available.
You can only be sure of the correct identity of a
server when the signature and the validity period
of a server certificate have been checked.
You are notified if the identity of the server is not
authentic or if you do not have the correct security
certificate in your device.
Digital certificates should be used if you want to
connect to an online bank or another site or remote
server for actions that involve transferring
confidential information. They should also be used
if you want to reduce the risk of viruses or other
To check certificate details, scroll to a certificate,
and select Options > Certificate details. The
180
Settings
validity of the certificate is checked, and one of the ● App. installation: Yes — The certificate is able
following notes may be displayed:
to certify the origin of a new Java™ application.
● Certificate not trusted — You have not set any
Select Options > Edit trust setting to change the
application to use the certificate.
value.
● Expired certificate — The certificate validity
period has ended.
Security module
● Certificate not valid yet — The certificate
validity period has not yet begun.
Press
, and select Tools > Settings >
General > Security > Security module.
● Certificate corrupted — The certificate cannot
To view or edit a security module(if available), scroll
be used. Contact the certificate issuer.
to it, and press the scroll key.
Change the trust settings
To view detailed information about a security
module, scroll to it, and select Options > Security
details.
Before changing any certificate settings, you must
make sure that you really trust the owner of the
certificate and that the certificate really belongs to
the listed owner.
Restore original settings
Scroll to an authority certificate, and select
Options > Trust settings. Depending on the
certificate, a list of the applications that can use the
selected certificate is shown. For example:
Press
, and select Tools > Settings >
General > Factory settings.
You can reset some of the settings to their original
values. To do this, you need the lock code.
● Symbian installation: Yes — The certificate is
able to certify the origin of a new Symbian
operating system application.
After resetting, the device may take a longer time
to power on. Documents and files are unaffected.
● Internet: Yes — The certificate is able to certify
servers.
181
Settings
To define in which format the coordinate
information is shown in your device, select
Coordinate format, and the desired format.
Positioning settings
Press
, and select Tools > Settings >
General > Positioning.
Positioning methods
Phone settings
● Integrated GPS — Use the integrated GPS
receiver of your device.
In phone settings, you can edit settings related to
phone calls and network.
● Assisted GPS — Use Assisted GPS (A-GPS) to
receive assistance data from an assistance data
server. See "Assisted GPS (A-GPS)", p. 58.
● Bluetooth GPS — Use a compatible external GPS
receiver with Bluetooth connectivity.
Call settings
Press
, and select Tools > Settings > Phone >
Call.
● Network based — Use information from the
● Send my caller ID — You can set your phone
number to be displayed to (Yes) or hidden from
(No) the person to whom you are calling, or the
value may be set by your service provider when
you make a subscription (Set by network)
(network service).
cellular network (network service).
Positioning server
To define an access point, and positioning server for
server may be preset by your service provider, and
you may not be able to edit the settings.
● Send my internet call ID — You can set your
internet caller ID to be displayed to or hidden
from the person to whom you are calling.
● Call waiting — To be alerted for incoming calls
(network service) while you are in a call, select
Activate. To check whether the function is
activated, select Check status.
Notation settings
To select which measurement system you want to
use for speeds and distances, select Measurement
system > Metric or Imperial.
182
Settings
● Internet call waiting — To be notified of a new
incoming internet call while you have a call in
progress, select Activated.
dialled by pressing and holding the key. See
"Speed dial a phone number", p. 142.
● Anykey answer — Select On, and you can
answer an incoming call by briefly pressing any
keypad key, except the power key.
● Internet call alert — To be alerted for incoming
internet calls, select On. If you select Off, you are
not alerted, but you receive a notification if you
missed a call.
● Line in use — This setting (network service) is
shown only if the SIM card supports two
subscriber numbers, that is, two phone lines.
Select which phone line you want to use for
making calls and sending text messages. Calls on
both lines can be answered irrespective of the
selected line. If you select Line 2 and have not
subscribed to this network service, you are not
able to make calls. When line 2 is selected, is
shown in the standby mode.
● Reject call with message — To send a text
message to a caller informing why you could not
answer the call, select Yes.
● Message text — Write a text to be sent in a text
message when you reject a call.
● Image in video call — If video is not sent during
a video call, you can select a still image to be
displayed instead.
● Line change — To prevent line selection
(network service), select Disable if supported by
your SIM card. To change this setting, you need
the PIN2 code.
● Automatic redial — Select On, and your device
makes a maximum of 10 attempts to connect the
call after an unsuccessful call attempt. To stop
automatic redialling, press the end key.
● Show call duration — Activate this setting if
you want the length of a call to be displayed
during the call.
Call divert
Press
, and select Tools > Settings > Phone >
● Summary after call — Activate this setting if
you want the length of a call to be displayed after
the call.
Call divert.
Call divert allows you to divert incoming calls to
your voice mailbox or another phone number. For
details, contact your service provider.
● Speed dial — Select On, and the numbers
assigned to the number keys (2 to 9) can be
183
Settings
To activate call divert, select Activate. To check
option is active (Check status). Call barring affects
whether the option is active, select Check status.
all calls, including data calls.
Several diverting options can be active at the same
Internet call barring
To select whether anonymous calls are allowed
from the internet, set Anonymous call barring on
or off.
time. When all calls are diverted,
the standby mode.
is shown in
Call barring and call diverting cannot be active at
the same time.
Network settings
Call barring
Your device can automatically switch between the
GSM and UMTS networks. The GSM network is
indicated with in the standby mode. The UMTS
Press
, and select Tools > Settings > Phone >
Call barring.
network is indicated with
.
Call barring (network service) allows you to restrict
the calls that you make or receive with the device.
For example, you can restrict all outgoing
Press
, and select Tools > Settings > Phone >
Network and from the following:
international calls or incoming calls when you are
abroad. To change the settings, you need the
barring password from your service provider.
● Network mode — Select which network to use.
If you select Dual mode, the device uses the GSM
or UMTS network automatically, according to the
network parameters and the roaming
Call barring and call diverting cannot be active at
the same time.
agreements between the wireless service
providers. For details and roaming costs, contact
your network service provider. This option is
shown only if supported by the wireless service
provider.
When calls are barred, calls may be possible to
certain official emergency numbers.
Voice call barring
Select the desired barring option, and set it on
A roaming agreement is an agreement between
(Activate) or off (Deactivate), or check whether the
two or more service providers to enable the users
184
Settings
of one service provider to use the services of
other service providers.
Data connections and access
points
● Operator selection — Select Automatic to set
the device to search for and select one of the
available networks, or Manual to manually
select the network from a list. If the connection
to the manually selected network is lost, the
device sounds an error tone and asks you to
reselect a network. The selected network must
have a roaming agreement with your home
cellular network.
Your device supports packet data connections
(network service), such as GPRS in the GSM network.
When you use your device in GSM and UMTS
networks, multiple data connections can be active
at the same time, and access points can share a data
connection. In the UMTS network, data connections
remain active during voice calls.
You can also use a WLAN data connection. Only one
connection in one wireless LAN can be active at a
time, but several applications can use the same
internet access point.
● Cell info display — Set the device to indicate
when it is used in a cellular network based on
microcellular network (MCN) technology and to
activate cell info reception.
required. You can define different kinds of access
points, such as the following:
Connection settings
● MMS access point to send and receive multimedia
In connection settings, you can edit access points
and other connectivity settings.
messages
● Internet access point (IAP) to send and receive e-
You can also edit settings for Bluetooth connectivity
in the Bluetooth connectivity application. See
"Settings", p. 47.
mail and connect to the internet
service provider for the service you want to access.
For availability and subscription to packet data
connection services, contact your service provider.
You can also edit settings for data cable connections
in the USB application. See "USB", p. 50.
185
Settings
To edit the settings of an access point, open one of
the access point groups, select an access point and
Edit. Follow the instructions from your service
provider.
Access points
Create a new access point
Press
, and select Tools > Settings >
Connection > Destinations.
● Connection name — Enter a name for the
connection.
You may receive access point settings in a message
from a service provider. Some or all access points
may be preset for your device by your service
provider, and you may notbeabletochange, create,
edit, or remove them.
● Data bearer — Select the data connection type.
Depending on the data connection you select, only
certain setting fields are available. Fill in all fields
marked with Must be defined or with a red *. Other
fields can be left empty, unless your service provider
has instructed otherwise.
When you open one of the access point groups (
,
,
,
), you can see the access point types:
To use a data connection, your service provider
must support this feature, and if necessary, activate
it for your SIM card.
indicates a protected access point
indicates a packet data access point
indicates a WLAN access point
Create access point groups
Tip: You can create internet access points in
Press
, and select Tools > Settings >
a wireless LAN with the WLAN wizard.
Connection > Destinations.
To create a new access point, select New access
point. The device asks to check for available
connections. After the search, connections that are
already available are shown and can be shared by a
new access point. If you skip this step, you are asked
to select a connection method and to define the
settings needed.
Some applications allow you to use access point
groups for network connection.
To avoid selecting a single access point every time
the device makes a network connection, you can
create a group that contains various access points
to connect to that network and define the order in
which the access points are used.
186
Settings
For example, you can add wireless LAN (WLAN) and ● Access point name — You obtain the access
packet data access points toan internetaccesspoint
group and use the group for browsing the web. If
you give WLAN the highest priority, the device
connects to the internet through WLAN if available
and through packet data if not.
point name from your service provider.
● User name — The user name may be needed to
make a data connection, and is usually provided
by the service provider.
● Prompt password — If you must enter the
password every time you log in to a server, or if
you do not want to save your password in the
device, select Yes.
To create a new access point group, select
Options > Manage > New destination.
To add access points to an access point group, select
the group and Options > New access point. To
copy an existing access point from another group,
select the group, an existing access point, and
Options > Organise > Copy to other dest..
● Password — A password may be needed to
make a data connection and is usually provided
by the service provider.
● Authentication — Select Secure to always send
your password encrypted or Normal to send
your password encrypted when possible.
● Homepage — Depending on the access point
you are setting up, enter the web address or the
address of the multimedia message centre.
To change the priority order of access points within
a group, select an access point and Options >
Organise > Change priority.
Packet data access points
Select Options > Advanced settings and from the
Press
, and select Tools > Settings >
following:
Connection > Destinations > New access
point, and follow the instructions on the screen. Or,
open one of the access point groups, select an
access point marked with , and select Edit.
● Network type — Select the internet protocol
type to transfer data to and from your device. The
other settings depend on the selected network
type.
● Phone IP address (for IPv4 only) — Enter the IP
address of your device.
Follow the instructions from your service provider.
Select from the following:
187
Settings
● DNS addresses — Enter the IP addresses of the ● WLAN network mode — Select Ad-hoc to
primary and secondary DNS servers, if required
by your service provider. To obtain these
addresses, contact your internet service
provider.
create an ad hoc network and to allow devices to
send and receive data directly; a WLAN access
point device is not needed. In an ad hoc network,
all devices must use the same WLAN network
name.
● Proxy server address — Enter the address of
the proxy server.
● WLAN security mode — Select the encryption
used: WEP, 802.1x (not for ad hoc networks), or
WPA/WPA2. If you select Open network, no
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network
supports them.
● Proxy port number — Enter the port number
of the proxy server.
WLAN internet access points
Press
, and select Tools > Settings >
Connection > Destinations > New access
point, and follow the instructions on the screen. Or,
open one of the access point groups, select an
access point marked with , and select Edit.
To enter the settings for the selected security mode,
select WLAN security settings.
Security settings for WEP
● WEP key in use — Select the wired equivalent
privacy (WEP) key number. You can create up to
four WEP keys. The same settings must be
entered on the WLAN access point device.
● Authentication type — Select Open or
Shared for the authentication type between
your device and the WLAN access point device.
● WEP key settings — Enter WEP encryption
(length of the key), WEP key format (ASCII or
Hexadecimal), and WEP key (the WEP key data
in the selected format).
Follow the instructions from your WLAN service
provider.
● WLAN network name — Select Enter
manually or Search for networks. If you select
an existing network, WLAN network mode and
WLAN security mode are determined by the
settings of its access point device.
● Network status — Define whether the network
name is displayed.
188
Settings
Security settings for 802.1x and WPA/WPA2
● Ad-hoc channel (only for Ad-hoc) — To enter a
channel number (1-11) manually, select User
defined.
● WPA/WPA2 — Select the means of
authentication: EAP to use an extensible
authentication protocol (EAP) plug-in, or Pre-
shared key to use a password. Complete the
appropriate settings:
● Proxy server address — Enter the address for
the proxy server.
● Proxy port number — Enter the proxy port
number.
● EAP plug-in settings — Enter the settings as
your service provider instructs.
Packet data settings
● Pre-shared key — Enter a password. The
same password must be entered on the WLAN
access point device.
Press
, and select Tools > Settings >
Connection > Packet data.
● WPA2 only mode — Only WPA2 enabled devices
are allowed to establish a connection in this
mode.
The packet data settings affect all access points
using a packet data connection.
● Packet data connection — If you select When
available and you are in a network that supports
packet data, the device registers to the packet
data network. Starting an active packet data
connection (for example, to send and receive e-
mail) is quicker. If there is no packet data
coverage, the device periodically tries to
establish a packet data connection. If you select
When needed, the device uses a packet data
connection only if you start an application or
action that needs it.
Advanced WLAN settings
Select Options > Advanced settings and from the
following:
● IPv4 settings — Enter the IP address of your
device, the subnet IP address, the default
gateway, and the IP addresses of the primary and
secondary DNS servers. Contact your internet
service provider for these addresses.
● IPv6 settings — Define the type of DNS address.
189
Settings
● Accesspoint — The accesspointnameisneeded Session Initiation Protocol (SIP) settings are needed
for certain network services using SIP. You may
receive the settings in a special text message from
your service provider. You can view, delete, or
create these setting profiles in SIP settings.
to use your device as a packet data modem to a
compatible computer.
● High speed packet access — Enable or disable
the use of HSDPA (network service) in UMTS
networks.
Configurations
Wireless LAN settings
Press
, and select Tools > Settings >
Connection > Configurations.
Press
, and select Tools > Settings >
Connection > Wireless LAN.
You may receive trusted server settings from your
service provider in a configuration message. You
can save view or delete these settings in
configurations.
● Show WLAN availability — Select whether
is displayed in the standby mode when a wireless
LAN is available.
● Scan for networks — If you set Show WLAN
availability to Yes, select how often the device
searches for available wireless LANs and updates
the indicator.
Access point name control
Press
, and select Tools > Settings >
Connection > APN control.
To view advanced settings, select Options >
Advanced settings. Changing wireless LAN
advanced settings is not recommended.
With the access point name control service, you can
restrict packet data connections and allow your
device to use only certain packet data access points.
This setting is only available if your SIM card
SIP settings
supports the access point control service.
Press
, and select Tools > Settings >
To set the control service on or off or to change the
allowed access points, select Options and the
corresponding option. To change the options, you
Connection > SIP settings.
190
Troubleshooting
Q: What is my password for the lock, PIN, or
PUK codes?
Q: Why do missing, discoloured, or bright
dots appear on the screen every time I turn
on my device?
A: The default lock code is 12345. If you forget the
lock code, contact your device dealer. If you forget
a PIN or PUK code, or if you have not received such
a code, contact your network service provider. For
information about passwords, contact your access
point provider, for example, a commercial internet
service provider (ISP) or network service provider.
A: This is a characteristic of this type of display.
Some displays may contain pixels or dots that
remain on or off. This is normal, not a fault.
Q: Why can't my device establish a GPS
connection?
A: Find more information about GPS, GPS receiver,
satellite signals, and location information in this
user guide. See "Positioning (GPS)", p. 57.
Q: How do I close an application that is not
responding?
A: Press and hold
. To close an application, scroll
Q: Why can’t I find my friend’s device while
to it, and press C . Pressing C does not close Music
player. To close Music player, select it from the list,
and Options > Exit.
using Bluetooth connectivity?
A: Check that both devices are compatible, have
activated Bluetooth connectivity, and are not in
hidden mode. Check also that the distance between
the two devices is not over 10 metres (33 feet) and
that there are no walls or other obstructions
between the devices.
Q: Why do images look smudgy?
A: Ensure that the camera lens protection windows
are clean.
192
Troubleshooting
Q: Why can’t I end a Bluetooth connection?
Q: Why can't I see my compatible PC in my
device in the home network?
A: If another device is connected to your device, you
can end the connection from the other device or
deactivate Bluetooth connectivity in your device.
A: If you are using a firewall application in your
compatible PC, check that it allows home media
server to use the external connection (you can add
Home media server to the firewall application's
exceptions list). Check from the firewall settings
that the firewall application allows traffic to the
following ports: 1900, 49152, 49153, and 49154.
Some WLAN access point devices have a built-in
firewall. In such cases, check that the firewall in the
access point device does not block traffic to the
following ports: 1900, 49152, 49153, and 49154.
Check that the WLAN settings are the same in your
device and compatible PC.
Press
, and select Tools > Bluetooth >
Bluetooth > Off.
Q: Why can’t the other device see the files
stored on my device in the home network?
A: Make sure that you have configured the home
network settings, content sharing is turned on in
your device, and the other device is UPnP
compatible.
Q: What can I do if my home network
connection stops working?
Q: Why can't I see a wireless LAN (WLAN)
access point even though I know I'm within
its range?
A: The WLAN access point may use a hidden service
set identifier (SSID). You can only access networks
and have created a WLAN internet access point for
A: Switch off the wireless LAN (WLAN) connection
from your compatible PC and your device, and
switch it on again. If this does not help, restart your
compatible PC and your device. If the connection
still does not work, reconfigure the WLAN settings
in both your compatible PC and device. See
"Wireless LAN", p. 43.See "Connection
settings", p. 185.
193
Troubleshooting
Q: How do I switch wireless LAN (WLAN) off
on my Nokia device?
Q: How can I save my data before deleting it?
A: To save data, use Nokia Nseries PC Suite to
synchronise with or to make a back-up copy of all
data to a compatible computer. You can also send
data using Bluetooth connectivity to a compatible
device. You can also store data on a compatible
memory card.
A: The WLAN on your Nokia device switches off
another access point, or not scanning for available
networks. To further reduce battery consumption,
you can specify that your Nokia device does not
scan, or scans less often, for available networks in
the background. WLAN switches off in between
background scans.
Q: What do I do if the memory is full?
A: Delete items from the device memory or mass
memory. If your device displays the note Not
enough memory to perform operation. Delete
some data first. or Memory low. Delete some
data from phone memory. when you are deleting
several items at the same time, delete items one by
one, beginning with the smallest items. See "Free
memory", p. 23.
To change the background scan settings:
1. Press
, and select Tools > Settings >
Connection > Wireless LAN.
2. To increase the background scan time interval,
adjust the time in Scan for networks. To stop
background scans, select Show WLAN
availability > Never.
Q: Why can’t I select a contact for my
message?
3. To save your changes, press Back.
When Show WLAN availability is set to
Never, the WLAN availability icon is not shown
in the standby mode. However, you can still
manually scan for available WLAN networks, and
connect to WLAN networks as usual.
A: The contact card does not have a phone number,
an address, or an e-mail address. Press
, select
Contacts, the relevant contact, and edit the contact
card.
194
Troubleshooting
on your compatible PC. For further information on
how to use Nokia Nseries PC Suite, see the Nokia
Nseries PC Suite help or visit the Nokia support
pages.
Q: How can I end the data connection when
the device starts a data connection again and
again?
A: The device may be trying to retrieve a multimedia
message from the multimedia message centre. To
stop the device from making a data connection,
Q: Can I use my device as a fax modem with
a compatible PC?
A: You cannot use your device as a fax modem.
However, with call diverting (network service), you
can divert incoming fax calls to a fax number.
press
, and select Messaging > Options >
Settings > Multimedia message > Multimedia
retrieval and Manual to have the multimedia
messaging centre save messages to be retrieved
later, or Off to ignore all incoming multimedia
messages. If you select Manual, you receive a
notification when you have a new message in the
multimedia message centre. If you select Off, the
device does not make any network connections
related to multimedia messaging. To set the device
to use a packet data connection only if you start an
application or action that needs it, press
, and
select Tools > Settings > Connection > Packet
data > Packet data connection > When
needed. If this does not help, switch the device off,
and switch it on again.
Q: Why do I have problems connecting the
device to my PC?
A: Ensure that you have the latest version of Nokia
Nseries PC Suite and that it is installed and running
195
Nokia original enhancements
● When you disconnect the power cord of any
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
accessory or enhancement, grasp and pull the
plug, not the cord.
● Check regularly that enhancements installed in a
vehicle are mounted and are operating properly.
● Installation of any complex car enhancements
An extensive range of
enhancements is available for
your device. Please visit
www.nokia-asia.com/
enhancements for more
details.
must be made by qualified personnel only.
Battery
Type
Talk time
Standby
For availability of the enhancements, please check
BL-6F
Up to 210/330
Up to 406/372
hours (WCDMA/
GSM)
with your local dealer.
minutes
(WCDMA/GSM)
Enhancements
Important: Battery talk and standby times
are estimates only and depend on signal strength,
network conditions, features used, battery age and
condition, temperatures to which battery is
exposed, use in digital mode, and many other
reach of small children.
196
Nokia original enhancements
factors. The amount of time a device is used for calls
will affect its standby time. Likewise, the amount of
time that the device is turned on and in the standby
mode will affect its talk time.
197
Battery and charger information
If a battery is being used for the first time or if the
Battery and charger
information
battery has not been used for a prolonged period,
it may be necessary to connect the charger, then
disconnect and reconnect it to begin charging the
battery. If the battery is completely discharged, it
may take several minutes before the charging
indicator appears on the display or before any calls
can be made.
Your device is powered by a rechargeable battery.
The battery intended for use with this device is
BL-6F . Nokia may make additional battery models
available for this device. This device is intended for
use when supplied with power from the following
chargers: AC-5, AC-8, DC-1, DC-8, DC-9 . The exact
charger model number may vary depending on the
type of plug. The plug variant is identified by one of
the following: E, EB, X, AR, U, A, C, or UB.
Always switch the device off and disconnect the
charger before removing the battery.
Unplug the charger from the electrical plug and the
device when not in use. Do not leave a fully charged
battery connected to a charger, since overcharging
may shorten its lifetime. If left unused, a fully
charged battery will lose its charge over time.
The battery can be charged and discharged
hundreds of times, but it will eventually wear out.
When the talk and standby times are noticeably
shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your
battery only with Nokia approved chargers
designated for this device. Use of an unapproved
battery or charger may present a risk of fire,
explosion, leakage, or other hazard.
Always try to keep the battery between 15°C and
25°C (59°F and 77°F). Extreme temperatures reduce
the capacity and lifetime of the battery. A device
with a hot or cold battery may not work
temporarily. Battery performance is particularly
limited in temperatures well below freezing.
198
Battery and charger information
Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object such as
a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the
battery. (These look like metal strips on the
battery.) This might happen, for example, when you
carry a spare battery in your pocket or purse. Short-
circuiting the terminals may damage the battery or
the connecting object.
Do not dispose of batteries in a fire as they may
explode. Batteries may also explode if damaged.
Dispose of batteries according to local regulations.
Please recycle when possible. Do not dispose as
household waste.
Do not dismantle, cut, open, crush, bend, deform,
puncture, or shred cells or batteries. In the event of
a battery leak, do not allow the liquid to come in
contact with the skin or eyes. In the event of such a
leak, flush your skin or eyes immediately with
water, or seek medical help.
Do not modify, remanufacture, attempt to insert
foreign objects into the battery, or immerse or
expose it to water or other liquids.
battery has been damaged, take it to a service
centre for inspection before continuing to use it.
Use the battery only for its intended purpose. Never
use any charger or battery that is damaged. Keep
your battery out of the reach of small children.
Nokia battery
authentication guidelines
Always use original Nokia batteries for your safety.
To check that you are getting an original Nokia
battery, purchase it from an authorised Nokia
dealer, and inspect the hologram label using the
following steps:
Successful completion of the steps is not a total
assurance of the authenticity of the battery. If you
have any reason to believe that your battery is not
an authentic, original Nokia battery, you should
refrain from using it, and take it to the nearest
authorised Nokia service point or dealer for
assistance. Your authorised Nokia service point or
dealer will inspect the battery for authenticity. If
authenticity cannot be verified, return the battery
to the place of purchase.
Improper battery use may result in a fire, explosion,
or other hazard. If the device or battery is dropped,
especially on a hard surface, and you believe the
199
Battery and charger information
device and its enhancements. It may also invalidate
any approval or warranty applying to the device.
Authenticate hologram
1. When you look at the
hologram on the label, you
should see the Nokia
To find out more about original Nokia batteries,
visit www.nokia-asia.com/batterycheck.
connecting hands symbol
from one angle and the Nokia
Original Enhancements logo
when looking from another
angle.
2. When you angle the
hologram left, right, down
and up, you should see 1, 2, 3
and 4 dots on each side
respectively.
What if your battery is not
authentic?
If you cannot confirm that your Nokia battery with
the hologram on the label is an authentic Nokia
battery, please do not use the battery. Take it to the
nearest authorised Nokia service point or dealer for
assistance. The use of a battery that is not approved
by the manufacturer may be dangerous and may
result in poor performance and damage to your
200
Care and maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your
warranty coverage.
● Do not attempt to open the device other than as
instructed in this guide.
● Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and
fine mechanics.
● Keep the device dry. Precipitation, humidity, and
all types of liquids or moisture can contain
minerals that will corrode electronic circuits. If
your device does get wet, remove the battery,
and allow the device to dry completely before
replacing it.
● Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the device.
● Do not paint the device. Paint can clog the
moving parts and prevent proper operation.
● Use a soft, clean, dry cloth to clean any lenses,
such as camera, proximity sensor, and light
sensor lenses.
● Do not use or store the device in dusty, dirty
areas. Its moving parts and electronic
components can be damaged.
● Use only the supplied or an approved
replacement antenna. Unauthorised antennas,
modifications, or attachments could damage the
device and may violate regulations governing
radio devices.
● Do not store the device in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
● Do not store the device in cold areas. When the
device returns to its normal temperature,
moisture can form inside the device and damage
electronic circuit boards.
● Use chargers indoors.
● Always create a backup of data you want to keep,
such as contacts and calendar notes.
201
Care and maintenance
● To reset the device from time to time for
optimum performance, power off the device and
remove the battery.
These suggestions apply equally to your device,
battery, charger, or any enhancement. If any device
is not working properly, take it to the nearest
authorised service facility for service.
202
Additional safety information
Parts of the device are magnetic. Metallic materials
Small children
may be attracted to the device. Do not place credit
cards or other magnetic storage media near the
device, because information stored on them may be
erased.
Your device and its enhancements may contain
small parts. Keep them out of the reach of small
children.
Medical devices
Operating environment
Operation of any radio transmitting equipment,
including wireless phones, may interfere with the
functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of
the medical device to determine if they are
This device meets RF exposure guidelines when
used either in the normal use position against the
ear or when positioned at least 1.5 centimetres (5/8
inch) away from the body. When a carry case, belt
clip, or holder is used for body-worn operation, it
should not contain metal and should position the
device the above-stated distance from your body.
adequately shielded from external RF energy or if
you have any questions. Switch off your device in
health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
To transmit data files or messages, this device
requires a quality connection to the network. In
some cases, transmission of data files or messages
may be delayed until such a connection is available.
Ensure the above separation distance instructions
are followed until the transmission is completed.
203
Additional safety information
Implanted medical devices
Hearing aids
Manufacturers of medical devices recommend that Some digital wireless devices may interfere with
a minimum separation of 15.3 centimetres (6
inches) should be maintained between a wireless
device and an implanted medical device, such as a
pacemaker or implanted cardioverter defibrillator,
to avoid potential interference with the medical
device. Persons who have such devices should:
● Always keep the wireless device more than 15.3
centimetres (6 inches) from the medical device
when the wireless device is turned on.
● Not carry the wireless device in a breast pocket.
some hearing aids. If interference occurs, consult
your service provider.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles such as electronic fuel injection systems,
electronic antiskid (antilock) braking systems,
electronic speed control systems, and air bag
systems. For more information, check with the
manufacturer, or its representative, of your vehicle
or any equipment that has been added.
● Hold the wireless device to the ear opposite the
medical device to minimise the potential for
interference.
Only qualified personnel should service the device
or install the device in a vehicle. Faulty installation
or service may be dangerousand mayinvalidate any
warranty that may apply to the device. Check
● Turn the wireless device off immediately if there
is any reason to suspect that interference is
taking place.
● Read and follow the directions from the
regularly that all wireless device equipment in your
vehicle is mounted and operating properly. Do not
store or carry flammable liquids, gases, or explosive
materials in the same compartment as the device,
its parts, or enhancements. For vehicles equipped
with an air bag, remember that air bags inflate with
great force. Do not place objects, including installed
manufacturer of their implanted medical device.
If you have any questions about using your wireless
device with an implanted medical device, consult
your health care provider.
204
Additional safety information
or portable wireless equipment in the area over the potentially explosive atmosphere are often, but not
air bag or in the air bag deployment area. If in-
vehicle wireless equipment is improperly installed
always, clearly marked. They include below deck on
boats, chemical transfer or storage facilities and
and the air bag inflates, serious injury could result. areas where the air contains chemicals or particles
such as grain, dust, or metal powders. You should
check with the manufacturers of vehicles using
liquefied petroleum gas (such as propane or
butane) to determine if this device can be safely
used in their vicinity.
Using your device while flying in aircraft is
prohibited. Switch off your device before boarding
an aircraft. The use of wireless teledevices in an
aircraft may be dangerous to the operation of the
aircraft, disrupt the wireless telephone network,
and may be illegal.
Emergency calls
Potentially explosive
environments
Important: This device operates using radio
signals, wireless networks, landline networks, and
user-programmed functions. If your device
supports voice calls over the internet (internet
calls), activate both the internet calls and the
cellular phone. The device will attempt to make
emergency calls over both the cellular networks and
through your internet call provider if both are
activated. Connections in all conditions cannot be
guaranteed. You should never rely solely on any
wireless device for essential communications like
medical emergencies.
Switch off your device when in any area with a
potentially explosive atmosphere, and obey all
signs and instructions. Potentially explosive
atmospheres include areas where you would
normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Switch off
the device at refuelling points such as near gas
pumps at service stations. Observe restrictions on
the use of radio equipment in fuel depots, storage,
and distribution areas; chemical plants; or where
blasting operations are in progress. Areas with a
To make an emergency call:
205
Additional safety information
1. If the device is not on, switch it on. Check for
adequate signal strength. Depending on your
device, you may also need to complete the
following:
CERTIFICATION INFORMATION
(SAR)
This mobile device meets guidelines for
exposure to radio waves.
● Insert a SIM card if your device uses one.
● Remove certain call restrictions you have
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits for
exposure to radio waves recommended by
international guidelines. These guidelines were
developed by the independent scientific
organisation ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
The exposure guidelines for mobile devices employ
a unit of measurement known as the Specific
Absorption Rate or SAR. The SAR limit stated in the
ICNIRP guidelines is 2.0 watts/kilogram (W/kg)
averaged over 10 grams of tissue. Tests for SAR are
conducted using standard operating positions with
the device transmitting at its highest certified
powerlevel in all tested frequencybands. The actual
SAR level of an operating device can be below the
maximum value because the device is designed to
use only the power required to reach the network.
That amount changes depending on a number of
factors such as how close you are to a network base
activated in your device.
● Change your profile from offline or flight
profile mode to an active profile.
2. Press the end key as many times as needed to
clear the display and ready the device for calls.
3. Enter the official emergency number for your
present location. Emergency numbers vary by
location.
4. Press the call key.
When making an emergency call, give all the
necessary information as accurately as possible.
Your wireless device may be the only means of
communication at the scene of an accident. Do not
end the call until given permission to do so.
206
Additional safety information
station. The highest SAR value under the ICNIRP
guidelines for use of the device at the ear is 1.40 W/
kg.
Use of device accessories and enhancements may
result in different SAR values. SAR values may vary
depending on national reporting and testing
requirements andthe network band. AdditionalSAR
information may be provided under product
information at www.nokia.com.
207
Index
date 161
security 47
sending data 47
settings 47
A
switching on/off 47
bookmarks 39
brightness, display 176
browser
accessories
See enhancements
177
B
back cover
bookmarks 39
browsing pages 35, 37
cache memory 40
downloads 38
security 40
changing 53
active toolbar 90
in camera 88
backing up device
memory 172
in Photos 101
backlight time-out 176
battery
address book
settings 41
See contacts
blogs 37
widgets 38
alarm clock 161
antennas 16
C
cable connection 50
cache memory 40
calculator 168
calendar 162
call log 149
device address 48
device visibility 47
low memory 49
pairing devices 48
receiving data 49
application manager 168
applications 168
updating 21
call waiting 142
calls 140
answering 141
208
Index
clipboard, copying to 128
clock 55, 161
currency
conference 141
duration of 148
internet calls 150
recording 160
converter 166
computer connections 51
conference calls 141
configuration
customer service 19
D
data connections
cable 50
settings 182
camera
contacts
device manager 174
PC connectivity 51
synchronisation 173
date and time 161
declining calls 141
device manager 174
dialled numbers 148
dismissing calls 141
display settings 176
DLNA 110
colour 96
flash 91
image quality 96
imaging mode 89
indicators 88
copying 154
default information 153
deleting 153
lighting 96
editing 153
location information 90
options 90
groups 155
images in 153
scenes 91
names and numbers 153
ringing tones 154
saving 153
document applications 164
downloads 38
self-timer 92
certificates 180
character encoding 128
charts
DRM (digital rights
management) 158
duration of calls 148
converter 166
E
copying text to
e-mail messages 132
clipboard 128
end all calls option 143
enhancement settings 177
copyright protection 158
spreadsheet 164
209
Index
Excel, Microsoft 164
internet calls 150
activating 150
blocking contacts 151
making 150
H
headset 32
F
help application 19
factory settings,
Flash Player 158
FM radio 81
settings 151
internet connection 35
See also browser
internet radio
favourites 84
FM transmitter 76
playing songs 77
settings 77
listening 84
settings 114
settings 85
HSDPA (high-speed downlink
station directory 85
packet access) 34
font settings 176
J
I
G
J2ME Java application
support 168
IAPs (internet access
points) 45
gallery
sounds 108
Java scripts/
images
streaming links 109
games 120
applications 168
sharing online 107
K
GPS
keyguard 29, 179
keypad 29, 179
System) 57
L
applications 169
internet call services
managing 151
landmarks 60
grid view of menus 56
language settings 177
licences 158
210
Index
light settings 176
list view of menus 56
location information 57
lock code 21
memory
N-Gage views 120
Navi wheel 29
navigation tools 57
network settings 184
news feeds 37
Nokia contact
clearing 23
web cache 40
messages
locking
information 19
Nokia original
e-mail 132
enhancements 196
multimedia 131
settings 134
M
notes 165
mailbox
O
e-mail 132
voice 141
offline mode 33
video 141
operator logo 177
voice 141
MMS (multimedia message
service) 129, 131
multimedia menu 30
131
main menu 56
Maps 63
options menu for calls 140
outbox, message 126
P
music player 71
radio 81
packet data connection
access point settings 187
counters 149
music player 71
streaming 157
voice recorder 160
meeting notes 162
meetings, setting up 162
memo notes 162, 165
settings 189
page overview 37
PDF reader 165
N
personal certificates 180
personalisation 52, 176
phonebook
N-Gage 120
settings 125
211
Index
predictive text entry
mode 127
recording
See contacts
photographs
See camera
Photos
active toolbar 95
calls 160
presentations
sounds 160
recording video clips 94
red-eye removal 104
redial feature 183
rejecting calls 141
remote mailbox 132
remote SIM mode 49
ringing tones 54
roaming 184
multimedia 165
presentations,
multimedia 109, 131
photos
editing 104
red-eye 104
profiles
tags 102
offline restrictions 33
proxy settings 188
PUK codes 21
viewing 99
S
PictBridge 106
PIN code 21
scenes, image and video 91
screen settings 176
scroll key 29
punctuation, text entry 128
PIN2 code 21
playing
Q
Quickmanager 165
Quickpoint 165
Quicksheet 164
Quickword 164
security
messages 132
podcasting
certificates 180
web browser 40
WEP 188
downloads 80
playing 80
WPA 189
security code 21
security module 181
self-timer, camera 92
sensor
searching 79
Radio
settings 78
settings 83
positioning information 57
positioning settings 182
power saver 176
PowerPoint, Microsoft 165
radio 81
RDS (Radio Data System) 81
RealPlayer 157
settings 178
sent messages folder 126
212
Index
service commands 126
service messages 131
setting wizard 25
settings
speaker phone 32
special characters, text
entry 128
personalisation 176
podcasting 78
positioning 182
RealPlayer 158
SIP 190
Speech 174
speed dialling 142
standby mode 55, 177
streaming links 109
streaming media 157
support 19
access point name
control 190
standby 177
call divert 183
calls 182
tv-out 178
WLAN internet access
points 188
Symbian applications 168
synchronisation
settings 114
synchronisation of data 173
camera 95
shared video 145
shooting modes, camera 91
signature, digital 180
SIM card
certificates 180
configuration 190
display 176
T
text entry 127
text messages
FM radio 83
receiving and reading 131
replying to 131
FM transmitter 77
messages 134
sending 129
settings 135
SMS (short message
service) 129
SIM messages 134
themes 52, 53
Navi wheel 178
network 184
time and date 161
time zone settings 161
time-out for backlight 176
software applications 168
software update 20
songs 71
packet data 189
packet data access
points 187
sounds 53
213
Index
tones 54
video clips
Z
ring settings 54
shared 145
zip manager 166
zooming 90, 95
video settings 97
voice calls
settings 176
toolbar 88, 101
TV configuration 178
tv-out mode 103
U
W
unlocking keypad 29, 179
UPIN code 21
wallpaper 52
web connection 35
web logs 37
UPnP (Universal Plug and Play
architecture) 110
week settings, calendar 162
welcome 25
UPUK code 21
USB cable connection 50
WEP 188
widgets 38
Word, Microsoft 164
world clock 161
WPA 189
Video Centre 116
Video centre
downloading 116
viewing 116
wrist strap 16
214
|