User Guide
The wireless phone described in this guide is approved for use in GSM 1900
networks.
Copyright information
Part No. 9359860,
© 2000 Nokia Mobile Phones. All rights reserved.
Printed in Canada 06/00
Nokia, Nokia Connecting People and the Original Accessories logos are
trademarks of Nokia Corporation and/or its affiliates.
US Patent No 5818437 and other pending patents. T9 text input software
Copyright (C) 1999. Tegic Communications, Inc. All rights reserved.
The information contained in this Owner’s Manual was written for Nokia
phone NSB-7. The right to make changes and improvements to any of the
products described in this guide without prior notice is reserved.
These commodities are authorized by the U.S. Government for export only to
Canada, Mexico, or the United States. They may not be resold, diverted,
transferred, or otherwise disposed of in any other country, either in their
original form or after being incorporated through an intermediate process into
other end-items, without the written approval of the U.S. Department of
State.
FCC/Industry Canada Notice
Your phone may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry
Canada can require you to stop using your telephone if such interference
cannot be eliminated. If you require assistance, contact your local service
facility.
This device complies with part 15 of the FCC rules. Operation is subject to the
condition that this device does not cause harmful interference.
Check the signal
Contents
Documentation
strength..............................16
Advanced calling
options................................17
Adjust the earpiece
Accessing this guide
volume during a call.......17
Redial the last-dialed
number...................................18
Dial any of the 10
last-dialed numbers........18
Preparing your phone
About indicators
numbers .......................... 25
[ i ]
Use special characters
numbers..............................27
Save the voice mailbox
number...................................35
Work with two
Save a name and
number................................28
Save a name and number
while in a call ...................28
If your phone book
phone lines........................35
Listen to your voice
messages ...............................35
is full....................................29
Find names in the
phone book............................29
Edit (revise) names and
numbers................................30
Erase names and
numbers .................................30
Erase stored names and
numbers..............................30
Erase your entire
phone book........................30
Switch between internal
memory...............................31
features........................... 37
Mute/unmute the
microphone....................... 41
[ ii ]
status...................................44
Activate automatic
group...................................53
Remove names from
redial....................................45
Save calling card
information........................45
Make a calling
card call..............................47
Add a voice tag to a
phone book entry.............47
Make a call using voice
recognition ........................48
Assign a number to a
a caller group....................53
Assign a ringing tone
to a caller group..............53
If you have two phone
lines.....................................55
Show call timer
during calls........................55
Remove a call cost
limit.....................................56
1-touch dial key...............50
Call a 1-touch dial
number................................51
Change 1-touch dialing
numbers................................51
Erase 1-touch dialing
numbers..............................51
Make an international
call...........................................51
[ iii ]
language ................................63
text input...........................75
Using predictive
text input...........................75
Predictive text
input tools.........................76
Save messages in
the outbox.........................79
Resend a message from
the outbox ............................80
Read new text
Lock the keypad
(Keyguard) .............................66
Turn fixed dialing
messages now .................. 81
Read new text
messages later.................. 81
Change settings for
some messages.................83
Change common
on or off..............................70
Add numbers to the
fixed dialing list ...............70
messages............................84
Send picture messages
Save your message
center number ..................74
[ iv ]
Receive a data or
messages............................86
options................................86
assistant...........................87
Send/receive calendar
fax call................................95
Prepare the devices for
infrared connection........96
Receive data via the
IR port.................................96
Send data via the
IR port.................................96
Check the status of
an IR connection .............96
Print phone book
notes....................................90
Turn off the alarm
clock ....................................91
Send a business card
using IR...............................92
View a received
business card.....................92
Save a viewed
entries.................................97
business card.....................93
Delete a viewed
business card.....................93
Notification of received
ringing tone ......................99
Listen to received
[ v ]
ringing tones.................. 100
color covers..................... 110
Chargers and other
ringing tones.................. 100
accessories..........................113
Batteries, chargers, and
Important safety
information........................ 103
Operating
questions (FAQ)............ 117
environment................... 103
Potentially explosive
Warranty....................... 121
Make an Emergency
Call.....................................107
Radio Frequency (RF)
Signals.............................. 108
[ vi ]
• For your safety
This section provides various safety guidelines. Read this
information before using your mobile phone (which will now be
referred to as “phone”). Failure to comply with these guidelines
could prove either dangerous or illegal. For more detailed safety
Road safety comes first
Don’t use a phone while driving. Park the vehicle first.
Switch off in hospitals
Switch off your phone when you are in a hospital or when you are
near medical equipment. Follow any regulations or rules that are
in force.
Switch off on aircraft
Donot use phones on airplanes as this can cause interference with
the navigational equipment. Also, the use of phones on airplanes
is illegal.
Switch off when refueling
Donot use the phone at a refueling point or near fuel or chemicals
of any kind.
Switch off near blasting
Do not use the phone where blasting is in progress. Observe
restrictions and follow any regulations or rules that are in force.
Interference
All phones are susceptible to interference, which could affect
performance. This could impede the making of an emergency call.
Use sensibly
Use only in the normal position (to ear). Avoid unnecessary
contact with the antenna when the phone is on.
Qualified service
Only qualified service personnel can install or repair cellular
phone equipment.
[ 1 ]
Accessories and batteries
Use only approved accessories and batteries. Do not connect
incompatible products.
Connecting to other devices
When connecting to any other device, read its user’s guide for
detailed safety instructions. Do not connect incompatible
products. Remember to make backup copies of all important data.
Making calls
Make sure the phone is switched on and in service. Enter the
phone number, including the area code, then press
. To end
a call press
. To answer a call press
.
Emergency calls
Make sure the phone is switched on and in service. If the word
Clear appears on the screen above the right selection key, press
and hold it to clear the display. Enter the emergency number, then
press
so.
. Give your location. Do not end the call until told to do
Infrared precautions
Do not point the infrared (IR) beam at anyone’s eyes or allow it to
interfere with other IR devices.
• Your phone’s label
can find the phone’s label on the back portion of the phone. This label
includes various information about the phone, such as the model number.
your service provider you might be asked for this information. Therefore,
do not remove the phone’s label.
[ 2 ]
Welcome
1. Welcome
Congratulations on your purchase of a Nokia 8290 mobile phone. You are
now on your way to using a new and exciting tool. However, before you
use your phone, read this chapter. It provides information you need for
using this guide and for contacting Nokia.
• Using this guide
For clarity, this guide uses various icons and terms. These icons and terms
Additionally, the guide describes various network services features,
Documentation conventions
This guide uses various types of texts to indicate specific items. These are
called documentation conventions. The table below lists and describes
these conventions:
Convention
italic
Description
Indicates emphasized text.
Example: You cannot use your phone without this
card.
bold
Indicates one of the following items:
•
Text displayed on your phone’s screen.
Example: Select or Silent.
•
•
Special text such as Notes and Warnings.
A Web link. Example: The Nokia World Wide Web
site at www.nokia.com.
[ 3 ]
Terms
This guide uses the following terms:
• Press means to briefly press and release a button.
• Press xxx means to press the selection key that is below xxx.
• Cross references appear as "see page x."
• Press and hold means to press and hold a button for 1 to 3 seconds
(depending on the feature being used), then release the button.
• Accessing this guide online
The latest version of this User guide may be available on the Nokia World
Wide Web site at www.NokiaUSA.com. Go to English and Spanish User’s
Manuals, and then perform a search to access this documentation.
[ 4 ]
Welcome
• Network services
A number of features known as network services are described in this
guide. These are special services to which your wireless service provider
can give you access.
These services include the following:
•
•
•
•
•
Voice privacy
•
•
•
•
Call forwarding
Call waiting
Send own number
Service command editor
List of own numbers
News and info services
Cell info display
Notifications on SIM update • Caller ID
Before you can take advantage of these network services features, you
must subscribe to them through your service provider.
Your service provider will give you instructions on how to use these
network services. This guide will tell you when you need to contact your
service provider for more step-by-step information.
Whenever this guide talks about a network services feature, the text will
not only tell you that this is a network services feature, but will also
++
display this icon after the first mention of the feature within a chapter.
Note: Some networks might not support all language-dependent
characters and/or services.
[ 7 ]
• Contacting Nokia
The Nokia Customer Service department is available to provide you with
help or more information. Before you contact this department, however,
please have the following information available:
•
•
The phone’s model number • The phone’s IMEI (serial) number
Your Zip code
To find the model and serial number, you have to remove the battery. Refer
procedure.
Finally, if you are calling about any type of phone accessory, please have
the accessory available. For example, if you are calling about a headset,
please have it handy. This way, if you are asked a specific question about
the accessory, it will be available for quick reference.
Customer Service, USA
Nokia Mobile Phones
7725 Woodland Center Boulevard, Suite 150
Tampa, FL 33614
Tel: 1-888-NOKIA2U (1-888-665-4228)
or (1) 813-880-5850
Fax: (1) 813-249-9619
TTY: 1-800-24NOKIA (1-800-246-6542)
Customer Service, Canada
Nokia Products Ltd.
575 Westney Rd. South
Ajax, Ontario L1S 4N7
Tel: (1) 905-427-6654
[ 8 ]
Before you begin
2. Before you begin
Before you begin using your phone, you need to perform several tasks. This
section tells you how to complete these tasks.
• Preparing your phone for use
To prepare your phone, you need to perform several steps, which are
described in the following subsections:
Install the SIM card
1
Switch off the phone.
2
With the back of the phone facing
you, press the top of the back cover
and the back cover release button,
then slide the back cover off.
3
Lift out the battery.
[ 9 ]
4
5
Align the SIM card:
O
Beveled corner on the right
Gold contact area downward.
O
Insert the SIM card.
Notes about SIM cards
• Keep all miniature SIM cards out of the reach of small children.
• The SIM card and its contacts are easily damaged by scratches or
bending, so be careful when handling, inserting, or removing the card.
• You must remove the battery to access the SIM card. Always make sure
that the phone is switched off before you remove the battery.
Install the battery
1
Place the battery in the
compartment with the label side
facing up and the golden contact
area aligned with the contact
prongs.
2
3
Slide the battery into place.
Slide the cover back into place
Charge the battery
1
Connect the lead from the charger
to the bottom of the phone.
[ 10 ]
Before you begin
2
Connect the charger to a standard
wall outlet. The battery power
indicator (or battery bar) appears on
the screen and starts scrolling. If the
phone is on, Charging appears also.
Battery bar
Note: If the battery is completely
empty, it might take a few
minutes before the battery bar appears on the screen.
Tip: You can use the phone while it’s charging.
3
When the battery bar stops scrolling, the battery charge is complete.
Battery full appears also, if the phone is on.
Note: The charging time depends on the charger and battery that you
use. For example, the charging time for the BLB-2 battery with
the ACP-8U charger is about 1 hour and 40 minutes.
4
Disconnect the charger from the phone.
Remove the battery
1
Switch off the phone.
2
Press the top of the back cover and the back cover release button,
then slide off the cover.
3
Lift out the battery.
[ 11 ]
3. About your phone
• Switch on your phone
• Press and hold power for more than
a second.
The phone might ask for a Personal
Identification (PIN) code or a
security code. See “PIN and PUK
codes” on page 66 for more
information.
Warning! Do not switch on
the phone in places where wireless phone use is prohibited or
where the use of the phone could cause interference or danger.
Tip: As with any other radio
transmitting device, do not
touch the antenna unnecessarily
when the phone is switched on.
Contact with the antenna affects
call quality and might cause the
phone to operate at a higher
power level than needed.
[ 12 ]
About your phone
• About the Start screen
When you turn on your phone, the first
screen that appears is the Start screen.
In the middle of the Start screen, you see
information indicating which wireless
networkyourphone uses. Thisinformation
canvarybetweenphones. Otherindicators
and icons appear on this Start screen
and are described in the next section.
About indicators and icons
On your phone, you have two types of identifiers: indicators and icons.
Indicators
Indicators show the status of something. The phone uses three types of
indicators:
• Signal strength indicator: Shows the strength of the signal to your
phone.
• Battery power indicator: Shows how much
power is left in your phone’s battery.
• Volume indicator: Shows the earpiece
volume level. Adjust the volume level with
the earpiece volume buttons on the left
side of the phone (see “Adjust the earpiece
[ 13 ]
Icons
Icons are graphical representations of a specific item or situation. For
example, this icon
appears when you have a voice message waiting
to be heard. (Some systems use a different method.)
The rest of this section shows examples of each icon that can appear on
your phone and tells you what these icons indicate.
Line 1 is selected for outgoing calls.
Line 2 is selected for outgoing calls.
You have an active call.
You have one or more new voice messages.
You have one or more new text messages.
(If blinking, text message memory is full.)
Keyguard is on. Your phone will not accept any key presses.
The alarm clock is set.
The Silent profile is selected.
Incoming voice calls are being forwarded to another number.
You have forwarded all voice calls received on line 1.
You have forwarded all voice calls received on line 2.
You have forwarded all voice calls received on lines 1 and 2.
The phone is ready for you to enter a response.
Characters entered will be uppercase letters.
Press
to switch letter case.
[ 14 ]
About your phone
Characters entered will be lowercase letters.
Press to switch letter case.
Characters entered will be numbers. (When entering letters, switch to
numbers by pressing and holding .)
You are in “special character” mode. Select a character, then press
Use. (When entering letters, switch to special characters by pressing
the
key.)
You are in predictive text mode.
You are in predictive text mode. Characters entered will be
uppercase letters. Press
to switch letter case.
You are in predictive text mode. Characters entered will be
lowercase letters. Press to switch letter case.
You are in predictive text mode. Characters entered will be
numbers.
Indicates the current call.
Indicates a call on hold.
[ 15 ]
4. Making and answering
calls
This chapter tells you how to make and receive calls and how to adjust
certain options.
• Make a call
Check the signal strength
The signal indicator on the left side of your phone’s screen
shows the strength of the network radio signal. The indicator
scrolls as the signal strength increases and decreases. To get
the strongest signal, try moving your phone slightly. If you’re
inside a building, move toward a window.
Use the keypad
1
Enter the area code and phone
number.
2
Press
.
Hold the phone as you would any other
telephone, with the antenna pointed up
and over your shoulder.
Tip: As with any other radio transmitting device, do not touch the
antenna when the phone is switched on. Contact with the antenna
affects call quality and may cause the phone to operate at a higher
power level than otherwise needed.
Warning: Do not switch on the phone when wireless phone use is
prohibited or when it may cause interference or danger.
[ 16 ]
Making and answering calls
Use the phone book
1
From the Start screen, press
you want.
or
and scroll to the number
2
Press
to make the call.
Tip: To skip ahead quickly in the list, press the number key that matches
the first letter of the name.
Advanced calling options
Adjust the earpiece volume during a
call
• To increase the volume of a call, press the upper part of
the volume key.
• To decrease the volume, press the lower part of the
volume key.
If an accessory with its own loudspeaker is connected to your phone, the
volume keys adjust the volume for that accessory.
• End a call
• Press
.
• Answer a call
When someone calls you, the phone alerts you (see “Ringing options” on
• To answer, press any key except Decline or
.
[ 17 ]
++
Caller ID
This is a network service that helps identify incoming calls. Contact your
service provider for details
When Caller ID is active, your phone may display the caller’s phone number.
The caller’s name may also appear, if their name and number have been
network supports it.
• Reject a call
• Press Decline.
• Redial the last-dialed number
• Press
twice.
Dial any of the 10 last-dialed numbers
1
2
3
Press
Scroll to the number you want to redial.
Press again.
.
[ 18 ]
The menu
5. The menu
Your phone offers an extensive range of functions that are grouped in
menus and submenus. Access these menus with the selection keys and
scroll keys, or by entering the appropriate shortcut number.
• Using the menus
Selection keys
Below the screen, you will find two
selection keys. Their functions depend on
the text above the keys.
For example, in this screen, the word
Menu appears above the selection key.
Press the key to enter the menu function.
Similarly, press the key under Names to
access phone book functions.
Selection keys
Scroll keys
Use the scroll keys, located just
below the screen, to scroll
through your phone’s menus and
phone book.
Scroll keys
[ 19 ]
Scroll bar
While using your phone’s menus, a scroll
bar appears at the far right of the screen.
This bar indicates where you are in the
menu. Each numbered “tab” on the bar
represents a different menu item.
For example, press Menu once. The scroll
bar appears with the first (top) tab
displayed. A different tab appears each time you press
or
.
Help text
Many menu items have brief help text. To view the help text, scroll to the
menu item and wait for about 15 seconds. Press More to see the next
page of the text or Back to exit.
• Menu shortcuts
When you scroll to a menu item, the
menu number appears on the screen
above the scroll bar. If you learn some
of these menu numbers, you can use
them to quickly get to different features
instead of having to scroll to them
through the menu.
• To use a shortcut, press Menu and then the menu number.
• For faster access, press Menu, then 0, then the menu number. This is
faster access only if Menu 10 is active.
For example, to get to Alarm Clock, press Menu 0 4 1.
[ 20 ]
The menu
• List of menu shortcuts
Here is an abbreviated list of menu items and their menu shortcuts. Later
chapters tell you how to work with the menus and explain their functions.
Note: Some items may not appear due to the SIM card configuration
and service available.
1
Messages
1
2
3
4
5
Inbox
Outbox
Write messages
Picture messages
Message settings
1
Set 1 (up to five sets may appear)
1
2
3
4
Message center number
Messages sent as
Message validity
Rename this set
2
Common
1
2
Delivery reports
Reply via same center
6
7
8
News & info service
Service command editor
Fax or data call
1
2
3
4
Fax and data
Also voice
Fax mailbox
Data mailbox
9
Voice messages
1
2
Listen to voice messages
Voice mailbox number
[ 21 ]
2
Call log
1
2
3
4
5
Missed calls
Received calls
Dialed calls
Clear call lists
Call timers
1
Last call
1
Current call
2
3
4
5
All calls
Received calls
Dialed calls
Clear timers
6
7
Call costs
1
2
3
Last call cost
All calls cost
Clear counters
Call cost settings
1
2
Call cost limit
Show costs in
3
Profiles
1
Normal
1
2
Select
Customize
1
2
3
4
5
6
7
Ringing options
Ringing tone
Ringing volume
Vibrating alert
Message alert tone
Keypad tones
Warning and game tones
2
3
4
5
Silent
Meeting
Outdoor
Pager
[ 22 ]
The menu
6
7
Car
1
Lights
2
Auto answer
Headset
4
Settings
1
2
3
4
Alarm clock
Clock
Auto update of date and time
Call settings
1
2
3
4
5
6
Automatic redial
Calling card
Closed user group
Send own caller ID when calling
Call waiting
Line for outgoing calls (see your service provider)
5
6
Phone settings
1
2
3
4
5
6
7
Language
Cell info display
List of own numbers
System selection
Touch tone length
Notifications on SIM update
Restore factory settings
Security settings
1
2
3
4
5
SIM card security
Phone security
Call restrictions
Fixed dialing
Change access codes
1
2
3
4
Change PIN code
Change PIN2 code
Change security code
Change restriction password
[ 23 ]
5
Forwarding (see your service provider)
1
2
3
4
5
6
7
8
Forward all voice calls
Forward if busy
Forward if not answered
Forward when phone off or no coverage
Forward when not able to take calls
Forward all fax calls
Forward all data calls
Cancel all call forwarding
6
Games
1
2
3
4
Memory
Snake
Logic
Rotation
7
8
9
Calculator
Calendar
Infrared
10 SIM services (if supported by your SIM
card and service provider))
[ 24 ]
Entering letters and numbers
6. Entering letters and
numbers
You can enter letters and numbers into your phone for a person’s name
and phone number, writing a text message, and so on. There are two ways
to do this:
• Standard text input, for making entries in the phone book, entering
calendar notes, and renaming caller groups
• Predictive text input, for writing text messages and picture messages.
See “Using predictive text input” on page 75 for more information
• Standard text input
ABC mode
This is the default mode. The ABC icon
appears as visual confirmation.
1
Find the key that has the letter you
want to enter.
2
Press it as many times as needed for
the letter to appear on the screen.
For example, to enter the name John:
Press
Press
Press
Press
J
O
H
N
[ 25 ]
Depending on the selected display language, the following characters
may be available.
Key
1
Characters
. ,’ ? ! - 1
Key
7
Characters
PQRS7
TUV8
2
ABC2
DEF3
GHI4
JKL5
8
3
9
WXYZ9
4
0
space, 0
5
*
Changes letter case
6
MNO6
#
Note: Some networks may not support all language-dependent
characters.
Enter spaces and punctuation
• To enter a space, press
once.
• To enter punctuation, press
want appears.
repeatedly until the character you
Erase mistakes
If you make a mistake:
• Press Clear to erase that character.
• Press Clear as needed to erase more than one character, or press and
hold Clear to erase the entire field of characters.
Change letter case
• To switch between uppercase and lowercase letters, press
.
The ABC icon switches to abc, showing you are using lowercase letters.
[ 26 ]
Entering letters and numbers
123 mode
To enter numbers, you can:
• Press and hold
and switch to 123 mode. Your phone displays the
icon. Press the appropriate number key to enter a number.
OR
• While in ABC mode, press and hold the corresponding number key until
the number appears.
As with the ABC mode, if you make a mistake
• Press Clear to erase that character.
• To switch back to the ABC mode, press and hold
again.
Use special characters in names and phone
numbers
In ABC mode
1
Press and hold
characters available:
. A screen appears with the following special
&
. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = ¤
¥
2
Use scroll keys to select the character you want, then press Insert.
In 123 mode:
You can access the following special characters only in 123 mode:
Use this character to send command strings to the network. Contact
your service provider for details.
*
+
p
Use this character as a prefix for dialing international numbers.
Use this character to create a pause that occurs when dialing a
number. Numbers entered to the right of this special character are
automatically sent as touch tones after a 2.5-second pause.
w
This character creates a wait; digits to the right of the w are not sent
until you press
.
[ 27 ]
7. Phone book
Use the phone book to store names and phone numbers.
• A phone book entry can consist of a number only, a name and number,
or a name only.
• Names are saved in the phone book memory and/or SIM memory. If
you try to save a name that already exists, the phone asks if you want
to replace the existing name.
• Save names and numbers
Save a name and number
1
Enter the phone number and press
Save.
2
Enter a name, then press OK.
Save a number only
1
Enter the phone number.
2
Press and hold Save.
The number is saved in your phone book. You can add a name to it later.
Save a name and number while in a call
1
2
3
Press Options.
Scroll to Names, then press Select.
Scroll to Add entry, then press Select.
[ 28 ]
Phone book
4
5
Enter the name, then press OK.
Enter the phone number, then press OK.
If your phone book is full
If your phone book is full, you can save the phone number to another
memory or replace an existing entry.
• Scroll to the entry you want to replace, then press OK.
• Find names in the phone book
From the Start screen
• Press
or
.
OR
Press Names. Search appears highlighted.
• Press the number key that matches the first letter of the name.
While in a call
1
Press Options.
2
Scroll to Names and press Select.
Search is highlighted.
3
Press the number key that matches the first letter of the name.
OR
4
5
Press Select.
When the box appears, enter the name and press OK. You can enter
just the first few letters of the name, then press OK. Your phone will
show the closest matching name.
[ 29 ]
• Edit (revise) names and numbers
At the Start screen:
1
2
3
4
Recall the stored name, press Details, then press Options.
Scroll to Edit, then press Select.
Edit the name, then press OK.
Edit the number, then press OK.
• Erase names and numbers
Erase stored names and numbers
At the Start screen:
1
2
3
Recall a stored name.
Press Details, then Options.
Highlight Erase, then press Select, then OK.
Note: You cannot undo Erase functions, so be careful!
Erase your entire phone book
Caution! This feature erases your entire phone book and can’t be undone!
1
2
3
4
Press Names.
Scroll to Erase and press Select.
Scroll to Erase all and press Select.
Scroll to the memory (Phone or SIM card) you want to erase, then
press Select.
5
6
When you see Are you sure?, press OK.
When the Security code: prompt appears, enter your security code
and press OK.
[ 30 ]
Phone book
• Two types of memory
Your phone has both phone memory and SIM card memory. You can save
names and numbers in either memory. The internal phone memory can
store up to 250 names and numbers. The amount of names and numbers
you can store in SIM card memory is dependent on SIM card capacity.
Please check with your SIM card provider or carrier.
Switch between internal memory and SIM
memory
1
2
3
4
At the Start screen, press Names.
Scroll to Options, then press Select.
Scroll to Memory in use, then press Select.
Scroll to SIM card or Phone, then press OK.
Note: Whenever you insert a SIM card for the first time, or if you insert
a different SIM card, SIM card memory is automatically selected.
++
• Call log
This network feature automatically keeps
track of numbers you’ve dialed, numbers
that have called you, and the time you’ve
spent in calls.
[ 31 ]
Look up dialed calls
Your phone saves the last 10 numbers
you’ve dialed.
1
2
Press Menu 2 3.
Scroll to the number you want to see
information about.
3
To dial the number, press
other options, press Options (see
; for
Look up received calls
Your phone saves the phone numbers of the 10 most recent calls you’ve
answered, if the caller’s number was available.
1
2
3
Press Menu 2 2.
Scroll to the number you want to see information about.
To dial the number, press
; for other options, press Options
Check for missed calls
Your phone saves the numbers and names (if available) of the last 10
callers that have tried unsuccessfully to reach you.
The screen tells you how many calls were missed. If the caller’s name and
number are stored in memory, that information appears.
After missing a call
1
Press List.
If you have missed more than one call, you can scroll through the list
of numbers.
2
3
To dial the displayed number, press
.
For other options, press Options. (See “Options in call lists” on next
page for more information.)
[ 32 ]
Phone book
4
To exit, press Back.
At any time
1
2
3
4
Press Menu 2 1.
Scroll to the number you want to see information about.
To dial the number, press
.
For other options, press Options (see “Options in call lists” below).
Options in call lists
When you view the missed calls, received calls, or dialed calls list and
press Options, a list of options appears on your phone’s screen.
Call time shows the date and time of the last call. Use the scroll keys to
scroll through up to five recent call dates/times for the displayed phone
number.
Edit number allows you to edit the displayed number and save it with a
name to your phone book.
Save allows you to enter a name for the number and save both to your
phone book.
Erase erases the number from the call list.
View number displays the phone number if the caller’s name is stored in
the phone book.
Clearing call lists
This feature clears all the missed, received, and dialed call lists.
1
2
Press Menu 2 4.
Scroll to All, Missed, Dialed, or Received, then press OK.
Note: Missed, received, and dialed calls lists are also erased when you
change the phone security setting (see “Security features” on
page 66) or when you use a SIM card that is not one of the five
most recent cards used with the phone.
[ 33 ]
++
8. Voice mail
Voice mail is a network feature that enables those who call you to leave
a voice message.
Note: You can use voice mail with either one or two phone lines.
When you receive a voice message, your phone lets you know by beeping,
displaying an icon on the screen, or showing a text message. The method
of notification depends upon your carrier.
Additionally, if you receive more than one voice mail message, your phone
may display the number of messages that you have received. Finally, if you
have subscribed to two different phone lines, the message would indicate
the line to which the message was addressed.
However, even though your phone notifies you of a message, the voice
mail feature is independent of your phone’s software. To use voice mail,
you must have:
• A voice mail subscription
• A voice mailbox number
• A temporary password
These items are provided by your service provider. Your service provider
should also tell you how to record a greeting for your voice mailbox and
how to change the temporary password.
After you obtain this information from your service provider, you must
then save the voice mailbox number to your phone. Refer to “Save the
After you have saved your voice mailbox number, refer to “Listen to your
Note: If you have difficulty using the voice mail feature, contact your
service provider.
[ 34 ]
Voice mail++
• Save the voice mailbox number
1
2
Press Menu 1 9 2.
Enter your voice mailbox number, then press OK.
Note: The number can be up to 32 digits long.
Work with two phone lines
If your particular SIM card supports it, your phone can have two phone
lines. Your service provider can tell you if your SIM card allows the use of
this feature and give you access to two phone lines.
If you decide to use two phone lines, you can select one of the two lines
for outgoing calls, but you can still answer calls on both lines.
If you use two phone lines, you will be given a voice mailbox number for
each line. You need to save each phone line’s voice mailbox number
separately.
To do this, first select the outgoing line and save its voice mailbox number.
Then, select the other line and save its number.
• Listen to your voice messages
If there’s a notification message on your screen, you can get your voice
messages using any of the following methods:
• If you’ve saved your voice mailbox number in your phone, press and
hold
to call your voice mailbox.
• Press
to call your voice mailbox and follow the directions
provided.
• Call your voice mailbox number as you would any other telephone
number, then follow the directions provided.
[ 35 ]
9. Profiles
The profiles feature lets you adjust and customize the phone’s ringing
tones for different events, environments, and caller groups. There are five
profiles available:
• Normal
• Silent
• Meeting
• Outdoor
• Pager
Normal is the default setting, but it is easy to switch to another profile.
Note: Two additional profiles, Car and Headset, appear only after these
accessories are connected to the phone for the first time.
• Select profiles
1
Press Menu 3.
2
Scroll to the profile you want.
Press Options. Select is highlighted.
Press OK.
3
4
OR
• To access the profiles directly, press and release
until the desired
profile is highlighted, then press OK.
For example, to keep your phone from ringing, select the Silent profile.
If you want your phone to ring loudly, select the Outdoors profile.
Note: You can customize the profiles and even rename them, except
Normal, Car, or Headset. See “Customizing your phone” on page 58
for more information.
[ 36 ]
Advanced calling features
10. Advanced calling features
• Active call options
++
Use call waiting
This network service lets you receive an incoming call when you’re already
in a call. (Contact your service provider for availability.) The phone beeps
to let you know of the incoming call.
Activate/cancel call waiting
1
2
3
Press Menu 4 4 5.
Scroll to Activate or Cancel.
Press OK.
Confirm call waiting status
1
2
3
Press Menu 4 4 5.
Press Select.
Scroll to Status and press OK.
The display shows Active: Voice calls. Scroll to check the status of
other features such as fax or asynchronous data services.
Answer a waiting call
1
Your phone signals when you have a
call waiting.
2
Press
to put the current call on
hold and answer the waiting call.
OR
Press Options, then press Select.
[ 37 ]
Reject a waiting call
You can just let the phone ring, or follow the steps below.
• Press Decline,
OR
1
2
Press Options and scroll to Reject.
Press Select.
Switch between calls
• Press
or Swap.
The icon represents the active call and the
icon represents the call
on hold.
End the active call
• Press
.
The held call becomes active.
OR
1
Press Options and scroll to End active call.
2
Press Select.
Third call waiting
If you have both an active and a held call and a third call is waiting,
choose one of the following options.
Drop an active call to answer the waiting call
• Press
.
The held call is unaffected.
End the active call and held call to answer the waiting call
1
2
3
Press Options.
Scroll to End all calls.
Press Select.
[ 38 ]
Advanced calling features
Use in-call options
During a call, press Options to see the In-call menu. Your choices are:
Choice
Hold or
What it does
Holds or releases a call.
Unhold
New call
Makes a call when you have a call in progress.
Touch tones Sends touch tones.
End all calls Ends all calls.
Names
Menu
Mute
Switches you to the phone book.
Switches you to the menu.
Mutes a call.
Put a call on hold
1
2
To put a call on hold, press Hold.
To return to the call, press Unhold.
Make a new call
1
Enter the second phone number, or recall it from the phone book.
Press
2
.
OR
1
Press Options.
2
Scroll to New call, then press Select.
Enter the second phone number, or recall it from the phone book.
Press Call.
3
4
With either method, the first call is automatically put on hold.
[ 39 ]
Switch between two calls in progress
• Press
or Swap.
The icon represents the active call and the
icon represents the call
on hold.
End the active call
• Press
.
The held call becomes the active call.
Send touch tones
When you press the keys during a call, your phone generates sounds
known as touch tones. Use touch tones to access many automated, over-
the-phone services such as voice mail, checking airline arrival/departure
times, and bank balances.
Note: You must be on an active call to send touch tones.
Set touch-tone length
1
2
3
Press Menu 4 5 5.
Scroll to Short (1/10 second) or Long (1/2 second)
Press OK.
Save touch tone strings
A touch-tone string is a series of tones in a certain sequence. Use touch
tone strings to send and receive information with your phone. For example,
you can save your office voice mailbox number along with your password
for easy access to your messages.
Store touch tone strings the same way you save phone numbers (see “Save
For frequently used strings of numbers, you can save an entire sequence
of digits in your phone book and send it as a touch tone string.
[ 40 ]
Advanced calling features
Send a touch tone string
1
2
3
Press Options.
Scroll to Touch tones and press OK.
Enter a touch tone string or recall a touch tone string from the phone
book and press OK.
End all calls
1
Press Options.
2
Scroll to End all calls, then press Select.
Access the phone book
This option appears in the menu as Names.
1
2
Press Options.
Scroll to Names and press Select. Now all your phone book functions
Access menus
• Scroll to Menus and press OK to access any of your phone’s menus.
Mute/unmute the microphone
You can mute and unmute your phone’s microphone while a call is in
progress. The difference between mute and hold is that mute lets you
hear the other caller.
1
2
3
Press Options.
Scroll to Mute, then press Select.
To unmute the microphone, press Unmute.
Muting and unmuting also affects the microphones of any accessories
connected to the phone.
[ 41 ]
++
Conference calls
This network service allows you to make conference calls with your phone.
Check with your service provider for details.
Make a conference call
1
2
3
Make a normal call to the first person.
Press Options and scroll to New call.
Press Select, recall or dial the number of the next party you want to
include, then press Call.
4
5
6
7
After the other party answers, press Options.
Scroll to Conference, then press Select.
To add other parties to the call, repeat steps 2 through 5.
To end the conference call, press
.
Have a private conversation with a participant
1
2
While in a conference call, press Options.
Scroll to Private, then press Select.
A list of the participants appears.
3
Scroll to the person you want to speak with, then press OK.
The other participants can continue talking with each other.
To rejoin the conference call, press Options.
Scroll to Conference, then press Select.
4
5
Drop a participant from the conference call
1
2
While in a conference call, press Options.
Scroll to Private, then press Select.
A list of the participants appears.
3
Scroll to the person you want to drop, then press OK.
The other participants can continue talking with each other.
Press Options.
4
5
Scroll to End active call, then press Select.
[ 42 ]
Advanced calling features
++
Transfer a call
When you have one active and one held call, you can connect the two
calls and disconnect yourself from the call.
Note: Your network must support this feature.
• During a call, press Options, scroll to Transfer, then press Select.
++
• Call forwarding
This network service lets you forward
your incoming calls to another phone
number.
Note: If you have subscribed to a
second phone line, call
forwarding works separately for
each line. Make sure you have
selected the line you want before you set up any call forwarding.
The following icons appear on your phone’s screen:
Incoming voice calls are being forwarded to another number.
You have forwarded all voice calls that are received on line 1.
You have forwarded all voice calls that are received on line 2.
You have forwarded all voice calls that are received on lines 1 and 2.
Activate call forwarding
1
Press Menu 5.
Scroll to one of the following options:
5 1 Forward all voice calls
Forwards all voice calls without ringing.
5 2 Forward if busy
5 3 Forward if not answered
[ 43 ]
5 4 Forward when phone off or no coverage
5 5 Forward when not able to take calls
Combines the previous three types, and lets you choose a delay
time between 5 and 30 seconds.
5 6 Forward all fax calls
5 7 Forward all data calls
5 8 Cancel all call forwarding
Press Select.
2
3 Activate is highlighted; press OK.
4
Select Voice Mail
OR
Select Other number.
5
If you choose Other number, enter the phone number to which you
want to forward calls, then press OK.
You can press Number to see if you entered the phone number
correctly.
Cancel call forwarding
1
2
Press Menu 5 1.
Scroll to Cancel and press OK.
Note: Canceling all call forwarding may also cancel any automatic
forwarding of calls to voice mail that your service provider has
activated for you. Also, this option may cancel your call forwarding
service. Contact your service provider for details.
Check call forwarding status
1
2
3
Press Menu 5.
Scroll to the call forwarding option you want to check.
Scroll to Status, then press OK.
[ 44 ]
Advanced calling features
Note: Status is not available for Forward when not able to take calls.
You can press Number to see which phone number the calls are being
forwarded to.
• Automatic redial
This feature redials the number you’re trying to call up to ten times.
Note: Automatic redial will not work while you make or answer another
call.
Activate automatic redial
1
2
3
Press Menu 4 4 1.
Scroll to On, then press OK.
Press and hold Back to return to the Start screen.
If the number you dial is busy, your phone immediately redials the number.
If it is still busy, your phone will redial the number up to nine more times.
• Calling card
You can store two calling card numbers in your phone’s memory.
Save calling card information
1
Press Menu 4 4 2.
2
Scroll to the calling card information you want to change, then press
Options.
3
4
5
Scroll to Edit, then press OK.
Enter your security code, then press OK.
At Dialing sequence, press Select. Scroll to the dialing sequence your
card uses (see chart on the next page) then press Select.
[ 45 ]
Use for cards
that require you to:
Cards using
this sequence
Dialing sequence
Access no.
+ Phone no.
+ Card no.
Dial the 1-800 access number, MCI, AT&T True
then phone number, then card Choice, Sprint
number (+ PIN if required).
Canada, Unitel
Access no.
+ Card no.
+ Phone no.
Dial the 1-800 access number, networkMCI,
then card number (+ PIN if
WorldPhone MCI
required), then phone number.
Prefix
+ Phone no.
+ Card no.
Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number (then PIN, if required).
GTE, PacBell, AT&T,
Stentor
Note: The order of the following steps may vary, depending on which
dialing sequence your card uses.
6
Enter the access number (usually the 1-800 number listed on the back
of the calling card), then press OK.
7
8
9
Enter the card number and/or PIN, then press OK.
Your phone displays Save changes? Press OK.
Scroll to Card name: and press Select.
10 Enter the card name, then press OK.
Choose a calling card
1
Press Menu 4 4 2.
2
Scroll to the card you want to use, then press Options.
3 Select is highlighted; press OK.
4
Enter your security code, then press OK.
[ 46 ]
Advanced calling features
Make a calling card call
1
Enter the phone number, including any prefix (such as 0 or 1) that your
calling card may require. See your calling card for instructions.
2
3
Press and hold
until your phone displays Card call.
Your phone displays Wait for tone, then press OK. Wait for the tone,
then press OK.
4
Your phone displays Wait for tone, press OK again. Wait for the tone,
then press OK.
This procedure may not work with all calling cards. Follow the directions
on the back of your calling card or contact your long distance company
for more information.
• Use Voice dialing
Your phone’s voice dialing feature lets you dial a number using your voice.
Before using this feature, you need to create entries in the phone book so
you can associate a "voice tag" with the name you wish to dial.
Add a voice tag to a phone book entry
To create entries in the phone book, see “Save names and numbers” on
page 28. By this time you should be familiar with the phone book. If not,
1
2
3
4
At the Start screen, scroll to the name you want to give a voice tag.
Press Details, then Options, and scroll to Add voice tag.
Press Select. The phone displays Press Start, then speak after tone.
Press Start.
You hear several beeps, and Please speak now appears. If you’re using
the headset, release the button.
5
Speak clearly into the microphone.
[ 47 ]
Note: Do NOT press Quit when you’re finished.
The phone automatically stops recording and then saves and replays the
voice tag.
If recording is not successful, your phone displays Voice system error.
Press Options, scroll to Add voice tag, and repeat steps 3 - 5.
Warning: Do not rely only on a voice tag for dialing emergency numbers.
In emergencies, stress causes changes in your voice, which
may keep the phone from recognizing the command.
Notes about voice tags
• Voice tags are not language dependent. Any clearly spoken word or
phrase can serve as a voice tag.
• It’s easier for the phone to differentiate between long, unique voice
tags. For example you might want to record a person’s first and last
names rather than only the first name.
• Voice tags must be shorter than 2 seconds.
• Voice tags are sensitive to background noise. For best results, record
them in a quiet environment.
• If you delete a name, any associated voice tag is also deleted.
• The recording process stops automatically. Pressing Quit aborts the
recording attempt.
Make a call using voice recognition
1
Hold the phone up to your ear, then press
and hold Names.
When you hear several beeps and Please
speak now appears, release the button.
Note: If you have the optional headset
attached, press and hold the headset
button, then when the phone beeps and
Please speak now appears, release the
button.
[ 48 ]
Advanced calling features
2
3
Pronounce the voice tag clearly into the microphone. Searching
appears. When the phone finds the voice tag, Found appears, and the
phone automatically dials the number.
If the phone does not locate a number, No match found. Try again?
appears.
Press Yes to try again or Exit to cancel and return to the Start screen.
Note: If you’re using the headset and the phone does not locate the
number, you will hear an error tone and No match found
appears. To start voice dialing again, press and hold the
headset button immediately after the error tone.
Play back a voice tag
1
Press Names and scroll to Voice tags.
2
Press Select, then scroll to the name with the voice tag you want to
hear.
3
Press Options, select Playback, and press OK.
Change a voice tag
1
Press Names and scroll to Voice tags.
2
Press Select, then scroll to the name with the voice tag you want to
change.
3
4
5
Press Options, scroll to Change, and press OK.
The phone displays Press Start, then speak after tone.
Press Start.
The phone repeats your voice tag, and Voice tag saved appears.
6
Erase a voice tag
1
Press Names and scroll to Voice tags.
[ 49 ]
2
3
Press Select, then scroll to the name with the voice tag you want to
change.
Press Options, scroll to Erase, and press OK.
Erase voice tag? appears.
4
Press OK to erase the voice tag.
• 1-touch dialing
Assign a name and number to a 1-touch dial location so that when you
press this key, the associated number automatically dials.
Note: The first nine numbers stored in SIM memory are automatically
stored in keys 1 through 9 as 1-touch dial numbers. You can
assign new numbers to the keys, but the names and numbers
must be already stored in the phone book. Refer to “Phone book”
on page 28 for more information.
Key 1 can be set up to access your voice mail. Check with your
service provider for details. Also, any key can be set up to dial
emergency numbers such as 911.
Assign a number to a 1-touch dial key
1
Press Names and scroll to 1-touch dialing.
2
Press Select. Key 1 appears.
If Assign appears, Key 1 does not have a
phone number assigned to it. If Options
appears, then the number shown is
assigned to Key 1.
3
4
Press Assign. A list of names appears.
Scroll to the phone book entry you want to assign to this key, press
OK, and Options appears.
Now you can edit the number if needed.
[ 50 ]
Advanced calling features
Call a 1-touch dial number
• Press and hold the appropriate key, or press the key then press
The phone dials the number.
.
1-touch dialing for key 1
• If your phone is set up for voice mail, you can press and hold
your phone dials voice mail.
and
.
• If you assign a 1-touch number to key 1, press
The phone dials the 1-touch number.
, then press
Change 1-touch dialing numbers
1
2
3
4
Press Names.
Scroll to 1-touch dialing and press Select.
Scroll to the key that you want to change and press Options.
Scroll to Change and press Select.
A list of names appears.
5
Scroll to the new name you want to assign to this key and press OK.
Erase 1-touch dialing numbers
1
2
3
4
5
Press Names.
Scroll to 1-touch dialing and press Select.
Scroll to the key that you want to erase and press Options.
Scroll to Erase and press Select.
Press OK to confirm.
• Make an international call
1
Press
twice to enter the
international dialing prefix (+).
2
Enter the country code, area code, and
phone number, and press
.
[ 51 ]
• Use the phone book
To use phone book menus, begin at the Start screen and press Names.
Then, scroll through the menus to select a particular menu or option.
Option
Search
Action
Searches for a specific name.
Enters a new name and number.
Add entry
Erase
Erases names/numbers. You can choose to erase
individual names/numbers, or you can erase all
information at one time.
Copy
Copies names/numbers between your phone and SIM
card.
Options
Chooses the memory source (SIM card or internal),
phone book view, and shows the memory status.
1-touch dialing Assigns up to nine 1-touch dial locations. Refer to
“1-touch dialing” on page 50 for more information.
Voice tags
Programs voice-activated dialing
Caller groups
Renames or changes the ringing tone for a caller
group.
• Caller groups
You can create groups of names in your phone book and give each group
a different ringing tone. When someone from that group calls, you’ll know
because of the ringing tone.
[ 52 ]
Advanced calling features
Add names to a caller group
The name you add to a caller group must first be stored in the phone book.
1
2
3
4
From the Start screen, scroll to the name or number you want.
Press Details, then press Options.
Scroll to Caller groups and press Select.
Scroll to the group you want to give this name to and press Select.
Remove names from a caller group
1
Follow steps 1 through 3 above.
2
Scroll to No group and press Select.
Assign a ringing tone to a caller group
1
2
3
4
5
From the Start screen, press Names.
Scroll to Caller groups and press Select.
Scroll to the group you want and press Select.
Scroll to Group ringing tone and press Select.
Scroll to the tone you want to hear when anyone from this group calls
you and press OK.
Tip: You can set your phone to ring only when people from certain caller
groups call you, and to be silent for all other call groups. See the
Rename a caller group
You can rename any call group with a name of your own.
1
2
3
Follow steps 1 through 3 above.
Scroll to Rename group and press Select.
Enter the group name, then press OK.
[ 53 ]
Assign group graphics
Each caller group has a graphic (picture) associated with it. When you get
a call from someone whom you have assigned to a caller group, the graphic
associated with that group flashes on the screen.
To turn the graphic on for a caller group:
1
2
3
Press Names, scroll to Caller groups, and press Select.
Scroll to the name of the group and press Select.
Scroll to Group graphic and press Select.
Note: To see the group graphic before you select it, scroll to View graphic
and press Select. Press Back to return to the menu.
4
Scroll to On and press Select.
To turn the graphic off, follow the steps above, but scroll to Off in the last
step.
Send a graphic to someone else
1
2
3
Follow steps 1 through 3 above.
Scroll to Send graphic.
Enter the phone number or scroll to find it in your phone book, then
press OK.
View a received graphic
1
When you receive a graphic from someone else, Group graphic
received appears.
2
Press Options and then choose Show to see the graphic, Save to save
it (you must choose which caller group gets the new graphic), or
Discard to discard it.
[ 54 ]
Advanced calling features
• Call timers
The phone automatically tracks the
amount of time you’ve spent on calls.
If you have two phone
lines
If you have subscribed to a second phone line (see “Work with two phone
lines” on page 35), call timers are separate for each of your phone lines.
When you view call timers, the call timers that are shown are for the
currently selected outgoing line. However, if you view call timers while
you are in a call, the call timers that are shown are for the line you are
using at that moment.
View the call duration
1
2
Press Menu 2 5.
Scroll to Last call, Received calls, Dialed calls or All calls.
Reset call timers to 0
1
2
3
Press Menu 2 5.
Scroll to Clear timers, then press OK.
Enter your security code, then press OK again.
Show call timer during calls
1
2
Press Menu 2 5.
Scroll to Last call, then press Details.
Current call is displayed.
Press Select.
3
4
Scroll to On, then press OK.
During a call, the amount of time spent in that call is displayed.
[ 55 ]
Note: The actual time invoiced for calls by your service provider may vary,
depending on network features, rounding-off for billing, and so
forth.
• Use call cost limits
This feature helps you limit the amount of money you spend on your
mobile phone bills. When the limit you set is reached, no calls can be
made except for emergency calls.
Note: The actual time invoiced for calls by your service provider may vary,
depending on network features, rounding-off for billing, and so forth.
Set a call cost limit
1
2
Press Menu 2 7 1.
OK.
3
4
Scroll to Set, then press OK.
Enter the number of charging units or dollars, then press OK.
Tip: Press # to insert a decimal point.
The number of remaining units is shown when the screen is clear.
Remove a call cost limit
1
2
Follow steps 1 and 2 above.
Scroll to Off, then press OK.
++
• Show call costs
This network service allows you to check the cost of the last or current
call, or the total cost of all calls that you have made or received since the
counters were last reset. To choose whether call costs are shown in
Note: The actual invoice for calls and services from your service provider
may vary, depending upon network features, taxes, and so forth.
[ 56 ]
Advanced calling features
View call costs
1
Press Menu 2 6.
2
Scroll to Last call cost (cost of last call, or current call if applicable)
or All calls cost (cost of all calls since counters were last reset).
Clear call cost counters
1
2
3
Press Menu 2 6.
Scroll to Clear counters, then press OK.
Enter your PIN2 code, then press OK.
++
• Show costs in
This feature allows you to choose whether you want to show call costs
and set call cost limits in charging units or in dollars. (If you choose
charging units, contact your wireless service provider for information
about the cost of a charging unit.) This feature appears only if supported
by your service provider and SIM card.
1
2
3
Press Menu 2 7 2.
Scroll to Currency or Units, then press Select.
If you selected Currency:
•
•
Enter the unit price, then press OK.
Enter the currency name, then press OK.
4
If you chose Units, call costs and call cost limits are measured in
charging units as agreed to by your service provider.
[ 57 ]
11. Customizing your phone
• Profiles
Profiles let you set your phone’s sound settings to whatever environment
you find yourself in, whether it’s a meeting or a soccer game. Each profile
contains settings for your phone’s ringing option, ringing tone, ringing
volume, vibrating alert, message alert tone, keypad tones, and warning
and game tones. Just pick the profile that suits your current environment:
Normal, Silent, Outdoor, Meeting, or Pager.
Note: The Car and Headset profiles do not appear until you attach these
accessories for the first time.
You can modify the settings in each profile, and (except for the Normal,
Car, and Headset profiles) you can rename them.
Select a profile
1
2
Press Menu 3.
Scroll to the profile you want to use (for example, Normal) and press
Options.
3
Scroll to Select, then press OK.
Customize the profile
1
2
3
Press Menu 3.
Scroll to the profile you want to customize (for example, Normal).
Press Options.
[ 58 ]
Customizing your phone
4
Scroll to Customize, then press OK.
The customize options appear.
Ringing option
Ringing tone
Ringing volume
Vibrating alert
Message alert tone
Keypad tones
Warning and game tones
Automatic answer
Lights (Appears after
connecting Car
Ringing options
Choose how a profile notifies you of an
incoming call.
Profile =
1
Scroll to one of the following, and
press OK.
Kit first time)
Ring: The phone rings.
Ascending: The ringing volume starts low and increases with
successive rings.
Ring once: The phone rings once.
Beep once: The phone makes a short beep.
Caller groups: Sets the phone to ring only if the call is from a person
who belongs to the selected group(s). Scroll to the group(s) you want
and press Mark to select or Unmark to deselect them.
Silent: The phone sounds no tone. Keypad tones, warning and game
tones, and message alert tones are turned off, and the
icon
appears at the top of the screen.
2
Press Back, then Yes to save or No to ignore the changes.
Ringing tone
Your phone comes programmed with 35 ringing tones. Also, there are
slots available for downloading up to five more ringing tones.
1
2
Press Menu 3.
Scroll to the profile for which you want to set the ringing tones, and
press Options.
3
4
Highlight Customize and press OK.
Scroll to Ringing tone, then press Select.
[ 59 ]
5
6
Scroll to the tone you want, then pause to hear a sample of the tone.
Press OK to select the tone or continue scrolling to select a different
tone.
Ringing volume
This feature sets the ringing volume for
incoming voice calls and message alert
tones.
1
2
Press Menu 3.
Scroll to the profile whose ringing
volume you want to set, then press
Options.
3
4
5
Scroll to Customize, then press OK.
Scroll to Ringing volume, then press Select.
Scroll to the volume level you wish to use, then pause to hear a sample
of the volume.
6
Press OK to select the volume or continue scrolling to select a
different volume.
Note: If you select Level 5, you see a note stating VERY LOUD RINGING.
Press OK to confirm the setting. Also when you select Level 5,
the phone starts ringing at Level 4, then ascends to Level 5.
Vibrating alert
Your phone has an internal vibrating mechanism. No special battery is
needed to make the phone vibrate when someone calls you.
1
2
Press Menu 3.
Scroll to the profile for which you want to set the vibrating alert, and
press Options.
3
4
Highlight Customize and press OK.
Scroll to Vibrating alert, then press Select.
[ 60 ]
Customizing your phone
5
Scroll to On or Off and press OK.
If you choose On, your phone vibrates even if you have set Ringing
Message alert tone
This option sets the tone your phone makes when you get a text message.
1
2
Press Menu 3.
Scroll to the profile whose message alert tone you want to set, then
press Options.
3
4
5
Scroll to Customize, then press OK.
Scroll to Message alert tone, then press Select.
Scroll through the tones until you hear one you like, then press OK.
Keypad tones
This option sets the volume of the tone you hear when you press the
phone’s keys.
1
2
Press Menu 3.
Scroll to the profile whose keypad tones you want to set, then press
Options.
3
4
5
Scroll to Customize, then press OK.
Scroll to Keypad tones, then press Select.
Scroll through the choices until you hear the level you want, then
press OK.
Warning and game tones
Warning tones are sounds your phone makes for conditions such as errors,
confirmations, power on, battery low, and recharge battery. Game tones
sound while you are playing one of the phone’s games.
1
2
Press Menu 3.
Scroll to the profile for which you want to set the warning tones, then
press Options.
[ 61 ]
3
4
5
Scroll to Customize and press OK.
Scroll to Warning tones, then press Select.
Scroll to On or Off, then press OK.
Rename a profile
1
Press Menu 3.
2
Scroll to the profile you want to rename and press Options.
Note: Remember, you cannot rename the Normal, Car, or Headset
profiles.
3
4
Scroll to Rename and press OK.
Enter the new profile name, then press OK.
Accessory profiles
Headset and Car profiles
When you connect your phone to an approved headset or car kit, the
phone automatically selects the Headset or Car profile. These profiles do
not appear in the phone’s menu until you connect the accessory. Also, you
cannot choose a different profile while these accessories are connected.
Your phone remembers any changes you make to the sound settings while
the headset or car kit is connected, and uses them again the next time you
use that accessory.
Set for automatic answer
This profile lets your phone answer incoming calls after just one ring.
Note: This profile is available only when your phone is connected to a
headset or to an approved car kit. This feature does not function
with data calls.
1
2
Press Menu 3.
Scroll to Car or Headset, then press Options.
[ 62 ]
Customizing your phone
3
4
5
Choose Customize and press OK.
Scroll to Automatic Answer, then press Select.
Scroll to On and press OK.
Set up car profile
If you are using your phone with an approved car kit, you can set lights to
On (lights stay on) or Automatic (after 15 seconds, lights turn off until
the next key is pressed, phone rings, etc.).
• Restore factory settings
You can use Menu 4 5 7 to reset some of the phone settings to their
original values. You must enter the security code.
Note: Restoring factory settings does not erase your phone book.
However, it does erase all customized settings you may have
entered.
• Choose the display language
You can choose your phone’s display
language.
1
2
Press Menu 4 5 1.
Scroll to the language you want,
then press OK.
• Set up the clock
Your phone has an internal clock that can
be displayed on the Start screen. It also
[ 63 ]
Set the clock
1
Press Menu 4 2 2.
2
Enter the current time, using two digits for both hours and minutes.
OR
Enter hours and minutes in 24-hour format.
Press OK.
3
4
Select am or pm and press OK.
Note: If you entered the time in the 24-hour format, am and pm do
not appear.
If this is the first time you have set the clock, the phone asks you to enter
the date. Enter the date in mmddyyyy format and press OK.
Select the time format
1
2
3
Press Menu 4 2 3.
Scroll to 24-hour or am/pm.
Press OK.
Display the clock
This feature lets you continuously display the time on the Start screen.
1
2
Press Menu 4 2.
Scroll to Hide clock or Display clock (only one choice appears,
depending on the current setting).
3
Press Select.
[ 64 ]
Customizing your phone
++
Set automatic update of date and time
If this feature is supported by your wireless service provider, it automatically
updates the clock in your phone in accordance with the current time zone.
Press Menu 4 3 and choose:
• On: Updates the date and time automatically.
• Confirm first: Requires you to confirm that you want the update.
• Off: Prevents the date and time from being automatically updated.
[ 65 ]
12.Security features
• Lock the keypad (Keyguard)
The keypad lock (Keyguard) disables your
keypad to prevent accidental key presses
(for example, when your phone is in your
pocket or purse).
Note: Keyguard does not prevent
unauthorized use of your
phone.
• To lock the keys, press Menu, then
.
• To unlock the keys, press Unlock, then
.
Note: Connecting your phone to a car kit automatically disables Keyguard.
• PIN and PUK codes
The following table summarizes how different types of security codes are
used in your phone.
For more
information
Code
Purpose
Security code Required by several phone
See entries for call
features. If phone security is timers, calling card,
on, the phone requests the
security code the first time
you use it after installing a
new SIM card.
phone book, and
phone security.
[ 66 ]
Security features
For more
information
Code
Purpose
PIN code
every time the phone is
turned on.
PIN2 code
Required by several phone
features.
See entries for show
call costs, call cost
limit, fixed dialing,
and PIN and PIN2
codes.
System
password
PIN codes
The PIN (Personal Identity Number) and PIN2 codes are 4- to 8-digit
numbers that usually come from your service provider along with the SIM
card. Use the PIN code to protect your phone and SIM card against
unauthorized use. The PIN2 code activates some of your phone’s
When the phone requires the PIN or PIN2 code, it displays Enter PIN code:
or Enter PIN2 code:.
• Enter the code then press OK.
Change your PIN or PIN2 code
You can change your PIN or PIN2 code to any 4- to 8-digit number.
1
2
3
4
Press Menu 4 6 5, then press Select.
Enter the current PIN code and press OK.
Enter the new PIN code and press OK.
Enter the new PIN code again to verify, and press OK.
[ 67 ]
Note: If you make a mistake while entering the code, Code Error appears.
Start again at step 2 and be careful to enter the correct code. If you
enter the wrong code three times in a row, the PIN code is blocked.
Set SIM card security
This feature sets your phone to ask for the PIN code each time the phone
is switched on and prevents unauthorized use of your phone.
1
2
3
Press Menu 4 6 1.
Enter the PIN code supplied by your service provider, and press OK.
Press (up or down) to highlight On and press OK.
To turn off this feature, repeat steps 1 through 3 above, but highlight Off
in step 3.
Note: If you enter the wrong PIN or PIN2 code three times in a row, the
SIM card is automatically blocked or you cannot activate the
function. See "PUK codes" below to unblock the codes.
PUK codes
The PUK (Personal Unblocking Key) and PUK2 codes are 4- to 8-digit codes
that also usually come from your service provider along with the SIM card.
The PUK code unblocks a blocked PIN code, and the PUK2 code unblocks
a blocked PIN2 code.
Unblock a PIN code
1
Press Menu 4 6 5, then press Select.
Change PIN code appears.
2
3
To unblock the PIN2 code, press (down) to select Change PIN2 code.
Press Select.
PIN code blocked appears.
4
Enter the PUK code, then press OK.
[ 68 ]
Security features
Note: If you enter a wrong PUK code ten times in a row, the SIM card
becomes invalid and you must contact your service provider for a
new card.
5
6
Enter the new PIN code, then press OK.
Enter the new PIN code again to verify, and press OK.
Note: You cannot change the PUK or PUK2 code, so keep a record
of them in a safe place. If you lose them, contact your service
provider.
If you try to change the PIN2 code, and you enter a wrong
PUK2 code ten times in succession, you can’t use functions
requiring the PIN2 code. Contact your service provider for a
new card.
• Security code
You need the security code to access some security features. When the
phone requires the security code, it displays Security code:
• Enter the code then press OK.
If you enter an incorrect security code five times in a row, the phone will
not accept the correct code for 5 minutes.
This code comes with your phone. The default security code is 12345. To
change the security code:
1
2
3
4
5
Press Menu 4 6 5.
Scroll to Change security code and press Select.
Enter the current security code, then press OK.
Enter the new security code, then press OK.
Enter the security code again to verify, then press OK.
Keep the code secret and in a safe place, separate from the phone.
[ 69 ]
• Fixed dialing
If supported by your SIM card, this feature lets you restrict your outgoing
calls to phone numbers included in the fixed dialing list or beginning with
the same digit(s) as an entry in the list.
Remember, If you turn fixed dialing on and don’t have any numbers in the
fixed dialing list, you can’t make any calls!
Note: When fixed dialing is set to on, calls may be possible to certain
emergency numbers in some networks (such as 911 or other
official emergency numbers).
Turn fixed dialing on or off
1
2
3
Press Menu 4 6 4.
Scroll to On or Off, then press OK.
Enter your PIN2 code, then press OK.
Add numbers to the fixed dialing list
1
2
3
4
5
6
Press Menu 4 6 4.
Scroll to Numbers, then press OK.
Scroll to Add, then press Select.
Enter your PIN2 code and press OK.
Enter a name to go with the restricted phone number, then press OK.
Enter the phone number you want to restrict, then press OK.
Repeat steps 3 through 6 for each number you want to add to the list.
++
• Restricting calls
This is a network service that lets you restrict the calls your phone can
make and receive. Check with your service provider for details.
Note: When calls are restricted, calls may be possible to certain
emergency numbers in some networks (such as 911 or other
official emergency number).
[ 70 ]
Security features
Turn on call restrictions
1
Press Menu 4 6 3.
2
Scroll through the types of calls you can restrict, and press Select
when you see the one you want.
Outgoing calls: Calls cannot be made.
International calls: Calls cannot be made to foreign countries.
International except to home country: When abroad, calls can be
made only within the current country and to your home country (that
is, the country where your home network operator is located.)
Incoming calls: Calls cannot be received.
Incoming calls if roaming: Calls cannot be received outside your home
area.
Cancel all call restrictions: Turns off all call restrictions. Calls can be
made and received in the usual way.
Note: If you selected Cancel all call restrictions, the following steps are
not available. Also, you can cancel call restrictions on each
option, allowing restrictions on other options to stay in force.
3
Scroll to one of the following options:
Activate: Enter the restriction password and press OK.
Cancel: Enter the restriction password and press OK.
Status: The phone lists the call types with call restriction active.
Press OK.
4
For more information about your restriction password, see “Restricting
[ 71 ]
++
• Set up a closed user group
This network service specifies the group of people to whom you can call
and who can call you. Preset resets the phone to use a user group that the
SIM card owner has agreed upon with the service provider.
Note: When calls are limited to closed user groups, calls may be possible
to certain emergency numbers in some networks (such as 911 or
other official emergency number).
[ 72 ]
Select a system
13.Select a system
You can select how your phone chooses a wireless network, as there may
be more than one available. The selection you make stays active until you
change it or change the SIM card.
1
2
Press Menu 4 5 4.
Scroll to Automatic or Manual, then press Select.
• Automatic: The phone automatically selects one of the available
systems.
• Manual: The phone searches for available systems and then lists
them. Scroll to the one you want, then press Select. The phone looks
for a network and displays the result. If you lose connection while in
Manual mode, the phone asks you to select a network again.
[ 73 ]
++
14.Text messages
The text message network service allows you to send short text messages
to other phones that have text message capability. You can also ask the
service provider to convert the message to other formats such as email
and fax.
• Set up text messaging
Before you can send and receive text messages, you must:
• Have a text message subscription through your service provider.
• Know your text message center number.
• Save your text message center number in your phone.
Save your message center number
1
Press Menu.
The Messages menu appears.
Press Select.
2
3
4
Scroll to Message settings, then press Select.
Choose the set of message settings you want to use (the first one is
the default), then press Select.
Message center number appears.
Press Select.
5
6
Enter your message center number, then press OK.
[ 74 ]
Text messages++
• Writing messages
Using standard text input
When you select this mode, the ABC icon appears as visual confirmation.
1
2
Find the key that has the letter you want to enter.
Press it as many times as needed for the letter to appear on the screen.
For example, to enter the name John:
Press
Press
Press
Press
J
O
H
N
See “Standard text input” on page 25 for more information.
Using predictive text input
Predictive text input is the default mode. This method allows you to write
text using a built-in dictionary. You can also add new words to the
dictionary. With predictive text input, you only need to press each number
key once for each letter.
For example, to write Nokia with the English dictionary selected:
(for N)
(for o)
(for k)
(for i)
(for a)
The display shows the above words for each key pressed.
Since the displayed word changes after each key stroke, disregard the
word until you have keyed in all the characters.
[ 75 ]
Predictive text input tools
-
Use for word entry. Press each key only once for each
letter.
Press to view the next matching word if the underlined
word is not the word you intended.
Spell
Press to add a new word to the dictionary.
Press once to accept a word and add a space.
Press and hold to enter a number.
that you can input numbers.
indicates
Press to change the character case.
indicates
uppercase.
indicates lowercase.
Press to select predictive input or standard text input.
and
,
indicate standard text input.
, and indicate predictive text
input.
Clear
160
Press once to delete the character to the left of the
cursor.
Press once to add a punctuation mark. To change the
underlined symbol, press
desired symbol appears.
repeatedly until the
Maximum number of characters available. Appears in
the top right corner of the screen and counts down for
each character added.
[ 76 ]
Text messages++
Select a language and turn on predictive text input
1
2
3
4
Press Menu, then press Select.
Scroll to Write messages, then press Select.
Press Options, scroll to Dictionary, then press OK.
Scroll to the language you want, then press OK.
T9 dictionary activated appears.
Turn off predictive text input
•
To switch from predictive text input to traditional text input, repeat
steps 1 through 3 above, then select Dictionary off.
OR
•
While writing the message, press
text input and standard text input.
to switch between predictive
Write with predictive text input
1
Press each key once for each letter.
For example, to write “hello” press
,
,
,
,
.
• Do not pay attention to the word
on the screen until you have
finished writing the word.
• Refer to the character counter in the top right of the screen.
The counter shows how many characters are available.
• Press Clear to delete a character.
• Press
to change the character case.
• Press and hold the respective number key to insert a number.
• Press
to insert a punctuation mark. If it is not correct, press
repeatedly to find the desired punctuation mark.
[ 77 ]
• To insert a symbol, press and
hold . The symbol screen
appears. Select the desired
symbol and press Insert.
2
When you have finished writing,
check the underlined word to see if it
is the word you intended to write.
If the word is correct
• Insert a punctuation mark, if needed. Then press
to confirm
the word, enter a space, and begin writing the next word.
If the word is not correct
• Press
repeatedly until the desired word appears, then press
to confirm the word.
OR
• Press Options, scroll to Matches, then press OK.
• Scroll to the correct word and press Use.
• Start writing the next word.
Note: When you enter a period to end a sentence, the phone switches
to mode so the that the first letter in the next word will be
uppercase.
If the ? character appears after the word
The word you intended to write is not in the dictionary.
• To add the word to the dictionary press Spell. See “Adding the
desired word to the match list.”
Add the desired word to the match list
If no matches are found in the predictive text input mode, you can add
the word to the dictionary.
1
Press
repeatedly until Spell appears in place of Options.
[ 78 ]
Text messages++
Press Spell and enter the word(s) using standard text input
2
3
Press OK to save the word(s).
Insert numbers
1
To add a number to the message, press and hold
appears.
until
2
Key in the desired numbers, then press and hold
ABC mode.
to return to
Insert symbols
1
Press and
hold until the symbol screen appears.
OR
Press Options and scroll to Insert symbol.
2
Select the desired symbol and press Insert.
Write compound words
1
Write the first part of the word and press
to accept it.
to enter
2
Write the last part of the compound word and press
the word in memory.
Save messages in the outbox
When you write a text message, it’s a good idea to save it in the outbox.
Then if there is a message delivery problem, you can easily resend the
message.
1
2
While writing the message, press Options.
Scroll to Save, then press OK.
Send the text message
1
Press Menu 1 3.
Write messages appears briefly, followed by the message screen.
[ 79 ]
2
Enter a message of up to 160 characters.
The number of available characters appears in the top right corner of
the screen.
3
4
Once you have finished writing, press Options, scroll to Send, then
press OK.
Enter or recall the recipient’s phone number, then press OK.
Sending message appears.
When the message is successfully sent, Message sent appears.
Note: If you need to exit while writing the message, press
anytime. Later, press Menu 1 3 to return and finish writing the
message. If you turn off the phone without saving the message,
the message will be lost.
• Resend a message from the outbox
Messages in the outbox have one of two icons in front of them. The
icon in front of a message heading shows that you have attempted to
send the message to the text message center. The
have not yet tried to send the message.
icon shows that you
1
2
3
4
Scroll to the message, then press Read.
Press Options.
Scroll to Forward and press OK.
Press Options.
Send appears already highlighted.
Press OK.
5
6
Enter the number and press OK to send the message.
[ 80 ]
Text messages++
• Read text messages
Read new text messages now
When you receive a text message, the phone displays Message received
and the
indicator, and makes a sound (depending on the “Message
1
2
To read the message, press Read.
This takes you to the Inbox, with the new message selected.
Press Read again to read the message.
Read new text messages later
1
When you receive a text message, press Exit.
2
Later when you want to read the message, press Menu 1 1 1.
A list of message headers is displayed. The
header indicates that a message has been read. The
that a message has not yet been read.
icon in front of the
icon indicates
3
4
Scroll to the message you want, then press Read.
If the message is long, use the scroll keys to scroll through the
message.
The text of the message is followed by the sender’s name or phone
number, reception date, and time
• Erase a message
1
2
While reading the message, press Options.
Scroll to Erase, then press OK.
Your phone asks you to confirm that you want to erase the message.
Press OK.
3
[ 81 ]
• Reply to a message
1
2
3
4
Press Options.
Scroll to Reply, then press OK.
Enter your message, then press Options.
Scroll to Send, then press OK.
The phone displays the return number.
Edit the number if needed, then press OK.
5
• Forward a message
1
2
Press Options.
Scroll to Forward, then press OK.
The message text appears.
3
4
Edit the message if necessary, then press Options.
Send appears already highlighted.
Press Send.
The Number box appears.
5
Enter the recipient’s phone number, then press OK.
OR
•
Press Search to recall a stored name and phone number, then
press OK.
•
Press OK again to confirm.
• Retrieve a number
You can save or dial a phone number that is included in a message.
Press Options.
1
[ 82 ]
Text messages++
2
3
Scroll to Use number, then press OK.
If more than one number is shown, scroll to the one you want, then
press OK.
The phone displays the number on the screen. You can dial it or save it as
if you had entered it yourself.
• Message settings
You can specify some of the ways your phone handles text messages.
Depending on your SIM card, you can have up to five “sets” of settings—
for example, one for email messages, one for pages, one for faxes, and
so on.
Change settings for some messages
1
2
3
Press Menu 1 5.
Scroll to the set you want to change the settings for, then press Select.
Scroll to one of these options:
Message center number: Get this number from your wireless service
provider. Enter the message center phone number and press OK, or
press Search to get the number from your phone book (if it is saved
there).
Messages sent as: Scroll to Text, Fax, Page, or E-mail, then press OK.
(In order to receive a converted message, the recipient needs to have
the appropriate terminal device.)
Message validity: The amount of time that messages should be stored
at the message center while the network attempts to deliver them.
Choose a time, then press OK.
Rename this set: Enter a new name for this set of message settings,
then press OK.
4
Press Select.
[ 83 ]
Change common settings for all messages
1
2
3
Press Menu 1 5.
Scroll to Common, then press Select.
Scroll to Delivery reports or Reply via same center, then press Select.
Delivery reports: Scroll to Yes or No, then press OK. Yes means that
the network tries to send delivery reports for the messages you send.
Reply via same center: The network tries to route the reply to this text
message through your own message center.
• Message storage
The inbox and outbox share a given amount of memory in your SIM card.
When this memory is full and there is no more room to store messages, the
message indicator blinks. If you are sent a text message when the memory
is full, the phone displays the message No space: message waiting. You
should delete one or more old messages to make room for the new message.
The network waits and resends the message at a later time.
Note: Depending on your SIM card, the inbox and outbox can contain a
total of up to 50 messages.
• Picture messages
Using Menu 1 4, you can send picture messages with your phone.
There are several images included in your phone, and also space for
one additional picture. All images can be replaced or deleted.
Note: Picture messaging must be supported by your service provider.
Send picture messages
1
Press Menu, then Select.
2
Scroll to Picture Messages and press Select.
[ 84 ]
Text messages++
Scroll to the picture you want to send, then press View.
3
The picture appears. To choose a different picture, press Back, scroll
to another picture, then press View.
4
5
Press Options and scroll to Forward.
Recall or enter the phone number to which you want to send the
picture message.
Note: The phone number you choose must be able to receive picture
messages.
6
Press OK.
Send picture messages with text
1
2
3
Press Menu, then Select.
Scroll to Picture Messages and press Select.
Scroll to the picture you want to send, then press View.
The picture appears. To choose a different picture, press Back, scroll
to another picture, then press View.
4
5
Press Options, scroll to Edit text, and press Select.
Write a message (up to 121 characters) to go along with the picture,
then press Options.
Note: You can use predictive text input or standard text input to
write the message. See “Using predictive text input” on page
75 for more information.
6
7
Scroll to Send picture and press OK.
Enter the phone number to which you want to send the picture
message and press OK.
Sending picture message appears, followed by Picture message sent.
Note: The phone number you choose must be able to receive
picture messages.
[ 85 ]
Receive picture messages
1
2
3
When your phone displays Picture message received, press View and
the message appears.
If the picture has a text message with it, scroll up or down to see the
entire message.
Press Save to keep the picture message, or press Back and Exit to
delete it.
Other picture message options
Erase: Deletes the picture you select.
Use number: Automatically lets you save any phone number included in
the text of the picture message.
Details: Shows the phone number of the person who sent you that picture
message.
[ 86 ]
Your personal digital assistant
15.Your personal digital
assistant
• Calendar
The calendar keeps track of reminders,
calls you need to make, meetings, and
birthdays. It can even sound an alarm
when it’s time for you to make a call or go
to a meeting.
Warning: Your phone must be switched
on to use this function. Do not
switch on the phone when wireless phone use is prohibited or
when it may cause interference or danger.
View the calendar
• Press Menu 8.
Enter the date
1
Press Options, scroll to Set the date, and press Select.
2
Enter the current month and day in mmddyyyy format, then press OK.
(Example: Enter December 31, as 12312000).
Date is set appears.
Enter the time
• Enter the time in hhmm format or in 24-hour format.
[ 87 ]
View the calendar
Press Menu 8 to see the current day’s calendar screen.
View day notes
This option allows you to view, erase, edit, move, and send notes made for
the selected day. Use the scroll keys to scroll through notes. Options
available while viewing a note are Erase, Edit, Move (to another date),
Send note to send the note, and Send via IR to copy the note to another
compatible phone using the infrared port.
Make note
With this option, you can choose from four note types: Reminder, Call,
Meeting, or Birthday. Your phone asks you for more information
depending on which one you choose.
1
2
3
4
5
Press Options, scroll to Make note, then press Select.
Scroll to the desired note type (for example, Reminder) and press OK.
Enter a subject for the reminder and press OK.
Enter the date for the reminder in mmddyyyy format and press OK.
When Set an alarm for the note? appears, choose Yes or No.
If you choose Yes:
• Enter the date for the alarm, then press OK.
• Enter the time for the alarm, then press OK.
• Choose am or pm, and press OK.
Calendar note saved appears briefly, and then the current day’s
calendar screen appears.
If you choose No:
• Calendar note saved appears briefly, and the current day’s
calendar screen appears.
[ 88 ]
Your personal digital assistant
When you set calendar notes for the displayed date, the appropriate
icon(s) appear in the lower right-hand corner:
Birthday reminder
Meeting reminder
Call reminder
Other reminder
Erase notes
1
Scroll to Erase notes and press Select.
2
Scroll to Of chosen day, One by one, or All at once, then press OK.
Of chosen day: Displays each note for the current day so you can delete the
notes individually. Press Erase to delete the note, or press the scroll keys
to view other notes.
One by one: Displays notes in chronological order, with birthdays first, so
you can delete them individually. Press Erase to delete the note, or press
the scroll keys to view other notes.
All at once: Allows you to delete all calendar notes at once. The phone
asks you to confirm your decision before erasing the notes.
View all notes
This option lets you scroll through all stored notes. Birthday notes appear
first in chronological order, followed by other notes, also in chronological
order.
Go to date
This option takes you directly to the specified date instead of scrolling.
• Enter a date in mmddyyyy format, then press OK.
Set the date
This option allows you to set the current date in your phone.
• Enter the date in mmddyyyy format, then press OK.
[ 89 ]
Send/receive calendar notes
When someone sends you a note, your phone displays Calendar note
received. You can save the note in your calendar and work with it in the
same way as any other note in your calendar, including setting an alarm.
For information on sending calendar notes, see “Send information via IR”
View received calendar notes
Caution: If you press Exit, the calendar note will be deleted!
1
When your phone displays Calendar note received, press Options.
Show is selected.
Press OK.
2
3
Scroll through the note.
Save received calendar notes
1
After viewing the calendar note, press Back.
2
Scroll to Save, then press OK
Discard viewed calendar notes
• After viewing the calendar note, press Back, then press Back again.
• Alarm clock
The alarm clock feature is based on your
phone’s internal clock and sounds an alert
at a time you specify. It even works if you
switch the phone off!
Set the alarm clock
1
Press Menu 4 1.
[ 90 ]
Your personal digital assistant
2
3
4
Enter the alarm time in hhmm format.
Press OK.
Select either am or pm and press OK.
The
icon appears at the top of the screen as a reminder.
Note: Step 4 is necessary only if you have selected am/pm format.
Manage the alarm
Phone on
• Press Stop to shut off the alarm.
OR
• Press Snooze.
The alarm stops and sounds again in 5 minutes.
Note: If you let the alarm sound for 1 minute without pressing a key, it
stops for 5 minutes, and then sounds again.
Phone off
The phone switches itself on at alarm time, and then the alarm sounds.
If you press Stop, the phone displays Activate phone for calls? Press Yes
to keep it on or No to switch it off.
Warning: Do not switch on the phone when wireless phone use is
prohibited or when it may cause interference or danger.
Turn off the alarm clock
1
Press Menu 4 1.
2
Scroll to Off and press OK.
[ 91 ]
• Business cards
Your phone can send or receive electronic business cards consisting of a
name and phone number. You can save received business cards to your
phone book.
Send a business card
1
2
3
4
5
6
Recall the name from your phone book.
Press Details, if shown, or skip to Step 3.
Press Options.
Scroll to Send bus. card.
Press Select.
Enter or recall the phone number to which you want to send the
business card.
7
Press OK.
Send a business card using IR
1
2
3
4
5
Recall the name from your phone book.
Press Details, if shown, or skip to Step 3.
Press Options.
Scroll to Send via IR and press Select.
Activate the IR port on the receiving phone.
The phone sends the business card through its IR port.
View a received business card
When you receive a business card, the phone displays Business card
received.
Note: If you press Exit at any time before saving the business card, the
business card will be deleted!
[ 92 ]
Your personal digital assistant
1
2
When your phone displays Business card received, press Options.
Show is selected.
Press OK to read the information.
Save a viewed business card
1
After viewing the business card, press Back, scroll to Save, then press
OK.
2
3
At the Name: prompt, edit the name if you want to, then press OK.
At the Number: prompt, edit the number if you want to, then press OK.
Delete a viewed business card
After viewing the business card, press Back, then press Exit.
• PC Suite
With the PC Suite you can write text messages or manage your phone’s
memory on a compatible PC. You can add, delete, and copy names and
phone numbers in the PC Suite and then transfer the revised data to your
phone via the infrared port.
The setup software allows installation on any compatible PC running
Windows 95/98. You can download the PC Suite and get more
information at www.nokia.com.
• Calculator
Your phone’s calculator adds, subtracts,
multiplies, divides, and converts between
currencies.
Warning: Your phone must be switched
on to use this function. Do not
switch on the phone when
wireless phone use is
prohibited or when it may cause interference or danger.
[ 93 ]
Use the calculator
1
2
Press Menu 7.
Enter the first number in the calculation.
• Press
mistakes.
to enter a decimal point and press Clear to erase any
• To add, press
once (+ appears)
twice (- appears)
• To subtract, press
• To multiply, press
• To divide, press
three times (∗ appears)
four times ( / appears)
3
4
5
Enter the second number, repeating steps as needed.
Press Options. Equals is selected.
Press OK.
Convert currency
Set the exchange rate
1
2
3
Press Menu 7, then press Options.
Scroll to Exchange rate, then press OK
Scroll to How many home units to a foreign unit (to enter the number
of domestic units to a foreign unit) or How many foreign units to a
home unit (to enter the number of foreign units to a domestic unit).
4
5
6
Press OK.
Enter the exchange rate (press
to enter a decimal point).
Press OK.
Convert a currency amount
1
2
3
Enter the amount to be converted.
Press Options.
Scroll to In home curr. to convert to domestic units or In foreign curr.
to convert to foreign units.
4
Press OK.
[ 94 ]
Your phone and other devices
16.Your phone and other
devices
++
• Fax and data calls
The phone can send and receive data through the PC Suite for 8290
application (network service). For more details, refer to the documentation
supplied with your PC Suite for 8290 and communications applications.
Make a fax or data call
1
From the Messages menu, select Fax and data or Also voice and press
OK.
Also voice allows you to switch from voice mode to data (or fax) mode
during a call.
2
3
Enter or recall the desired phone number and press OK.
If you selected Also voice in step 1, to switch between voice and data/
fax mode during a call, press Options, select Voice Mode or Data
Mode (or Fax Mode), and press OK.
4
After the transmission, end the call by pressing
.
Receive a data or fax call
You can answer a data or fax call in the usual way, even when the phone
keypad is locked.
• Send information via IR
You can set up your phone to receive data through its infrared (IR) port.
To use an IR connection, the device with which you want to establish a
connection must be IrDA compliant.
[ 95 ]
Prepare the devices for infrared connection
•
•
•
The IR ports of the two devices must point at each other.
There must be no obstructions between the two devices.
The two devices must be within 2 feet of each other.
Receive data via the IR port
To receive data from another compatible phone:
1
2
3
Make sure that the two devices are ready for the IR connection.
Select the Infrared menu to activate the IR port for data reception.
Have the user of the sending phone select the desired function to start
data transfer.
If data transfer is not started within 45 seconds, the connection is
cancelled and will have to be restarted.
Send data via the IR port
On a PC provided with an appropriate application, you can:
•
•
•
•
•
Send a caller group graphic via IR.
Copy and print names and numbers from the phone book.
Print a text message on a compatible printer.
Send a calendar note via IR.
Print a calendar note on a compatible printer.
Check the status of an IR connection
The status of an IR connection is indicated by
.
•
When
is displayed continuously, there is an IR connection
between your phone and the other device.
•
When
blinks, your phone is trying to establish a connection with
the other device or a connection has been lost.
• When
is not displayed, no IR connection exists.
[ 96 ]
Your phone and other devices
• Print using IR
You can print stored text messages or phone book entries using any
printer set up for printing through an IR port.
Print text messages
1
Press Menu, then press Select.
2
Scroll to where the text message is stored (inbox or outbox) and press
Select.
3
4
5
Scroll to the message you want to print and press Read.
Press Options and scroll to Print via IR.
Align the phone’s IR port with the printer’s IR port.
Note: Be sure the phone is within 2 feet of the printer’s IR port and
that there are no obstructions between the printer’s IR port
and the phone’s IR port.
6
Press OK. When the message is successfully transmitted to the printer,
the phone displays Message printed.
Print phone book entries
1
2
3
4
Recall the name/number you want to print.
Press Details, then press Options.
Scroll to Print via IR.
Align the phone’s IR port with the printer’s IR port.
Note: Be sure the phone is within 2 feet of the printer’s IR port and
that there are no obstructions between the printer’s IR port
and the phone’s IR port.
5
Press Select.
When the name/number is successfully transmitted to the printer, the
phone displays Business card printed.
[ 97 ]
17.Fun and games
• Games
Challenge yourself or a friend to the four fun games in your phone.
Warning: Your phone must be switched on to use this function. Do not
switch on the phone when wireless phone use is prohibited or
when it may cause interference or danger.
Snake
Feed the snake with as many goodies as possible and watch it grow. Use
keys 2, 4, 6, and 8 to turn the snake toward food. The longer the snake’s
tail grows, the higher your score. If the snake runs into its own tail or the
surrounding wall, the game is over.
Start a two-player game
Snake can be played as a two-player game using the IR ports of two
phones.
Before starting a two-player game, make sure that the IR ports of the two
devices are pointing at each other and that the IR connection is activated.
Both players need to start the same game on their phones.
Logic
Find the secret combination of figures in a column. Possible figures are
shown at the top of the screen. Press the 5 key repeatedly to select a figure
and the 2, 4, and 8 keys to move the cursor. Once you think you have the
right combination, press the
key. The result appears as a set of marks
above the column. A correct figure in the right place gets a full mark; a
correct figure in the wrong place gets a half mark. The game ends when the
correct figures are in the right place.
Tip: To copy a figure from the previous column, move the cursor over it
using the 2, 4, or 8 key, then press the 5 key.
[ 98 ]
Fun and games
Memory
Memory is like the old card game in which you lay cards face down on the
floor and try to turn up matching pairs.
Move the cursor with the 2, 4, 6, and 8 keys. Press the 5 key to reveal a
card. Press the # key to jump to the right over revealed cards, or move
from the bottom right of the screen to the top left. Press the
key
to jump to the left over revealed cards, or move from the top left of the
screen to the bottom right. Once you match two cards, they remain
“turned up.”
Rotation
Arrange the numbers in numerical order starting from 1. Rotate the
numbers inside the frame counterclockwise with the 1 key and clockwise
with the 3 key. Move the frame to another position with keys 2, 4, 6,
and 8.
++
• Download ringing tones
You can download up to five ringing tones to replace the Personal entries
in your list of ringing tones. For details about this network service, contact
your wireless service provider.
Notification of received ringing tone
When your phone receives a ringing tone, it displays Ringing tone
received.
[ 99 ]
Listen to received ringing tones
Note: If you press Exit at any time before saving the ringing tone, the
ringing tone will be deleted!
1
When your phone displays Ringing tone received, press Options.
Playback is selected.
2
Press OK.
The phone plays the ringing tone.
Save received ringing tones
1
2
3
After listening to the ringing tone, press OK.
Scroll to Save, then press OK.
Choose which ringing tone you want to replace (either an empty
Personal place holder, if any are remaining, or a previously downloaded
tone), then press OK.
The tone is saved to your list of ringing tones.
Discard received ringing tones
If you don’t want to save the ringing tone, press Exit without saving it, or
scroll to Discard, then press OK.
[ 100 ]
Reference information
18.Reference information
• Batteries, chargers, and
accessories
This section provides information about the phone’s batteries, accessories,
and chargers. Be aware that the information in this section is subject to
change as the batteries, chargers, and accessories change.
This phone is intended for use when supplied with power from an ACP-7U,
an ACP-8U, LCH-8 or an LCH-9 charger. Other usage could invalidate any
approval given to this apparatus and might be dangerous.
Warning! When you purchase batteries, chargers, and accessories
for your phone, use only batteries, chargers, and accessories that
have received approval from the phone’s manufacturer. The use of
any other type of phone-related hardware may invalidate any approval or
warranty applying to the phone, and could also be dangerous. For availability
of approved batteries, chargers, and accessories, check with your dealer.
Note: For information on how to charge and recharge your battery, refer
When the battery is fully charged, the indicator will tell you that
the battery is fully charged.
When you are not using a charger, disconnect it from the power source.
Do not leave the battery connected to a charger for more than a week,
since overcharging could shorten its life span. If left unused, a fully-
charged battery will discharge itself over time.
Temperature extremes can affect the ability of your battery to charge.
Therefore, allow it to cool down or warm up before trying to charge it.
[ 101 ]
When the battery is running out of power and your phone only has a few
minutes of talk time remaining, a warning tone sounds and the Battery
low message appears briefly. When no more talk time is left, a warning
tone is sounded and the phone switches itself off.
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object, like a coin, a clip, or a pen causes a direct
connection of the + and - terminals of the battery, which are metal strips
on the back of the battery.
An example of short-circuiting could occur if you carry a spare battery in
your pocket or purse, where the battery could come into contact with
objects such as a coin. Short-circuiting could damage either the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in either
summer or winter conditions, will reduce the capacity and lifetime of the
battery. Always try to keep the battery between 15°C and 25°C (59°F and
77°F).
A phone with a hot or cold battery might not work temporarily, even if the
battery is fully charged. The performance of Li-Ion batteries is particularly
limited in temperatures below 0°C (32°F).
The following list provides guidelines that you can follow:
•
When the operating time (talk time and standby time) is noticeably
shorter than normal, buy a new battery.
•
•
•
Use the battery only for its intended purpose.
Never use any charger or battery that is damaged and/or worn out.
Batteries must be recycled or disposed of properly. Do not dispose of
batteries by putting them in fire!
•
When you disconnect the power cord of any accessory, grasp and pull
the plug, not the cord.
[ 102 ]
Reference information
• Important safety information
This section provides additional safety information. A brief overview of
Traffic safety
Do not use a handheld telephone while driving a vehicle. Always park the
vehicle before using the phone.
After completing your phone conversation, always secure the phone back
into its holder; do not place the phone on the passenger seat or place it
where it can break loose in a collision or during a sudden stop.
Note: The use of an alert device to operate a vehicle’s lights or horn on
public roads is not permitted.
Remember: Safety—Your most important call.
Operating environment
Remember to follow any special regulations that are in force in any area,
and always switch off your phone wherever it is forbidden to use it.
Otherwise, the use of your phone could cause interference or danger.
When connecting the phone or any accessory to another device, read the
associated user guide first and obtain detailed safety instructions.
Note: Do not connect incompatible products.
As with other mobile radio transmitting equipment, you are advised that,
for the satisfactory operation of the equipment and for the safety of
personnel, it is recommended that the phone should only be used in the
normal operating position. This position is when the phone is held to your
ear with the antenna pointing over your shoulder.
Electronic devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, certain electronic equipment might not be shielded
against the RF signals from your wireless phone. The following four
subsections provide more information about this topic.
[ 103 ]
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of
6 inches (20 cm) should be maintained between a handheld wireless
phone and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent research by
and recommendations of Wireless Technology Research. Persons with
pacemakers:
•
Should always keep the phone more than 6 inches (20 cm) from their
pacemakers when the phone is switched on.
•
•
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimize the potential
for interference.
Note: If you have any reason to suspect that interference is taking
place, switch off your phone immediately.
Hearing aids
Some digital wireless phones could interfere with some hearing aids. In
the event of such interference, you might want to consult your service
provider.
Other medical devices
Operation of any radio transmitting equipment, including cellular phones,
could interfere with the functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of the medical device to
determine if they are adequately shielded from external RF energy. Also
contact these authorities if you have any questions.
Switch off your phone in health care facilities or where any posted
regulations instruct you to do so. Hospitals or health care facilities could
be using equipment that is sensitive to external RF energy.
[ 104 ]
Reference information
Vehicles
RF signals could improperly affect installed or inadequately shielded
electronic systems in motor vehicles. These could include electronic
fuel injection systems, electronic anti-skid (anti-lock) braking systems,
electronic speed control systems, or air bag systems.
Check with the manufacturer or its representative regarding your vehicle.
You should also consult the manufacturer of any equipment that has been
added to your vehicle.
Posted facilities
Switch your phone off in any facility where posted notices so require.
Potentially explosive atmospheres
Switch off your phone if you are in any area that has a potentially explosive
atmosphere, and obey all signs and instructions. Sparks in such areas could
cause an explosion or fire, resulting in bodily injury or even death.
You are advised to switch off the phone while at a refueling point (service
station). And, you are reminded of the need to observe restrictions regarding
the use of radio equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often—but not always—
clearly marked. These areas include the following: below deck on boats;
chemical transfer or storage facilities; vehicles using liquefied petroleum
gas (such as propane or butane); areas where the air contains chemicals
or particles, such as grain, dust, or metal powders; and any other area
where you would normally be advised to turn off your vehicle engine.
Vehicles
Only qualified personnel should service the phone or install the phone in
a vehicle. Faulty installation or service could be dangerous and might
invalidate any warranty that could apply to the unit.
[ 105 ]
Regularly check that all wireless phone equipment in your vehicle is
mounted and operating properly.
Do not store or carry flammable liquids, gases, or explosive materials in
the same compartment as the phone, its parts, or its accessories.
For vehicles equipped with an air bag, remember that an air bag inflates
with great force. Do not place objects, including both the installed or the
portable wireless equipment, in the area over the air bag or in the air bag
deployment area. If the in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
Switch off your phone before boarding an aircraft. The use of wireless
telephones in an aircraft may be dangerous to the operation of the
aircraft, may disrupt the wireless telephone network, and may be illegal.
Failure to observe these instructions could lead to the suspension or the
denial of telephone services to the offender, or it could result in legal
action, or both scenarios could apply.
• Emergency calls
IMPORTANT!
This phone, like any wireless phone, operates using radio signals,
wireless and landline networks, and user-programmed functions.
Because of this, connections in all conditions cannot be guaranteed.
Therefore, you should never rely solely on any wireless phone for essential
communications (for example, medical emergencies).
Remember, to make or receive any calls, the phone must be switched on and
be used in a service area that has adequate signal strength. Emergency calls
might not be possible on all wireless phone networks or when certain
network services and/or phone features are in use. Check with local service
providers.
[ 106 ]
Reference information
Always make sure that your phone is properly charged before attempting
any emergency calls. If you allow your battery to become empty, you will be
unable to receive or make calls, including emergency calls. You must then
wait a few minutes after the charging begins to place any emergency calls.
Make an Emergency Call
1
If the phone is not on, switch it on.
Some networks may require that a valid SIM card is properly inserted
in the phone.
2
3
Enter the emergency number for your present location (for example,
911 or any other official emergency number—emergency numbers vary
by location).
Press
.
If certain features are in use (Keyguard, fixed dialing, restrict calls, and so
on), you might first need to turn those features off before you can make
an emergency call. Consult this document and your local cellular service
provider.
When making an emergency call, remember to give all of the necessary
information as accurately as possible. Remember that your wireless phone
might be the only means of communication at the scene of an accident—
do not terminate the call until given permission to do so.
[ 107 ]
Radio Frequency (RF) Signals
Your wireless handheld portable telephone is a low-power radio
transmitter and receiver. When it is ON, it receives and sends out radio
frequency (RF) signals.
In August 1996, the Federal Communications Commission (FCC) adopted
RF exposure guidelines that included safety levels for handheld wireless
phones. Those guidelines are consistent with safety standards previously
set by both U.S and international standards bodies:
• ANSI C95.1 (1992)*, NCRP Report 86 (1986)*, ICNIRP (1996)*, and
RSS-102 issue 1.
Those standards were based on comprehensive and periodic evaluations
of the relevant scientific literature. For example, over 120 scientists,
engineers, and physicians from universities, government health agencies,
and industry reviewed the available body of research to develop the ANSI
Standard (C95.1).
The design of your phone complies with the FCC guidelines (and those
standards).
For body worn operation, to maintain compliance with FCC RF exposure
guidelines, use only Nokia approved accessories. When carrying the phone
while it is on, attach the phone to the specific Nokia belt-clip or place the
phone in the specific Nokia carrying cases that have been tested for
compliance.
Use of non-Nokia-approved accessories may violate FCC RF exposure
guidelines and should be avoided.
*American National Standards Institute, National Council on Radiation
Protection and Measurements; International Commission on Non-
Ionizing Radiation Protection.
[ 108 ]
Reference information
Care and maintenance
Your phone is a product of superior design and craftsmanship and should
be treated with care. The suggestions below will help you to fulfill any
warranty obligations and allow you to enjoy this product for many years.
When using your phone, battery, charger, or any accessory:
• Keep it and all its parts and accessories out of the reach of small
children.
• Keep it dry. Precipitation, humidity, and liquids contain minerals that
will corrode electronic circuits.
• Do not use or store it in dusty, dirty areas as its moving parts can be
damaged.
• Do not store it in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store it in cold areas. When the phone warms up to its normal
operating temperature, moisture can form inside the phone, which
could damage the phone's electronic circuit boards.
• Do not attempt to open it. Non-expert handling of the device could
damage it.
• Do not drop, knock or shake it. Rough handling can break internal
circuit boards.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean it. Wipe it with a soft cloth that has been slightly dampened in
a mild soap-and-water solution.
• Do not paint it. Paint can clog the device’s moving parts and prevent
proper operation.
If the phone, battery, charger, or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
[ 109 ]
• Accessories
If you want to enhance your phone’s functionality,
a range of accessories is available for you. You can
select any of these items to help accommodate
your specific communication needs. For availability
of these and other accessories, contact your service
provider.
A few practical rules for accessory
operation
• Keep all accessories out of reach of small children.
• When you disconnect the power cord of any accessory, grasp and pull
the plug, not the cord.
• Check regularly that any vehicle-installed accessories are mounted
and are operating properly.
• Installation of any complex car accessories must be made by qualified
personnel only.
Use only batteries, chargers, and accessories that have been approved by
the phone manufacturer. The use of any other types could invalidate any
approval or warranty applying to the phone, and could be dangerous.
battery usage information.
Nokia Xpress-on™ color covers
Your phone’s Xpress-on cover is available in several fashion colors.
Extra covers may be purchased from your authorized Nokia dealer.
• Always store the phone with the cover attached.
• Before changing the cover, always switch off the phone and disconnect
the phone from the charger or any other device.
[ 110 ]
Reference information
Remove the cover
1
Using a coin, press the colored tab on
the top of the phone.
2
Slide the cover forward.
Remove the keypad
1
Removethekeypadfrom
the back of the cover.
2
Place the keypad into
the back of the new
cover.
Replace the cover
1
Place the bottom of the new cover
against the bottom of the phone.
Make sure both sets of plastic tabs
line up with their slots, as shown at
right.
2
Close the cover and snap it shut all the
way around the edge of the phone.
[ 111 ]
• Batteries
This section provides information about the phone’s batteries. Be aware
that the information in this section is subject to change.
Note: This is a lithium ion (Li-Ion) battery. Dispose of used batteries in
accordance with any local regulations.
The tables shown in this section provide information about battery
options that are available for your phone, charging times with the Rapid
Travel Charger (ACP-8U), the Standard Travel Charger (ACP-7U), talk
times, and standby times. Consult your service provider for more
information.
Note: The charging times listed in the next section are approximate.
Charging Times
Battery option
ACP-7U Charger ACP-8U Charger
2 hrs 25 min 1 hr 40 min
BLB-2 Li-ion Battery 650 mAh
Note: The times displayed above allow your battery to obtain
approximately 80% of its capacity. When this happens, the
battery scroll bars on your phone’s screen stop scrolling. If you
want to obtain 100% battery capacity, allow another 2 hours for
a “trickle” or “maintenance” charge.
Standby and Talk Times
Battery option
Digital
talk time
Standby time
BLB-2 Li-ion Battery
650 mAh
2 hrs to
3 hrs 20 min
50 to 150 hrs
Note: The above times are approximate. Battery operation times vary
according to signal conditions, network parameters that are set
by the service provider, temperature, and how you use your phone.
[ 112 ]
Reference information
• Chargers and other accessories
This section provides information about the phone’s chargers and
accessories. Be aware that the information in this section is subject to
change as the chargers and accessories change.
The chargers and accessories that are described in this section are
available for your phone. Contact your dealer for details. Also, refer to the
accessories brochure that was included in your sales package for the entire
line of Nokia Original Accessories.
Note: When a charger is not in use, disconnect it from the power
source. Do not leave the battery connected to a charger for longer
than a week, since overcharging the battery could shorten its life
span. If left unused, a fully charged battery will discharge itself
over time.
Standard Travel Charger (ACP-7U)
This is a lightweight (187g) and durable AC
charger.
To use the Standard Travel Charger, plug it into a
wall outlet and connect the lead from the charger
to the base of your phone.
Rapid Travel Charger (ACP-8U)
This is a lightweight (100g) and durable AC charger.
Calls can be made during charging, even with a fully
discharged battery.
To use the Rapid Travel Charger (ACP-8U), plug it into a
standard 120V or 220V AC wall outlet, and connect the
lead from the charger to the base of your phone.
The charger can also be used together with the optional
Desktop Charging Stand. Approximate charging times
[ 113 ]
Rapid Cigarette Lighter Charger (LCH-9)
You can charge your phone’s battery from
your vehicle battery by using the Rapid
Cigarette Lighter Charger (LCH-9). You can
also use this lightweight charger with the
Desktop Charging Stand.
Calls are possible during charging. A green
light indicates that the charger is ready for charging (when not charging)
or finished charging (if it has been charging). The battery charging times
are the same as those for the Rapid Travel Charger (ACP-8U).
The input voltage range is from 11 to 32V DC, negative grounding. Avoid
prolonged charging with the Rapid Cigarette Lighter Charger (LCH-9)
when the car engine is not running; this could cause your car battery to
drain. Note also, that in some cars, the cigarette lighter plug is not
provided with electricity if the ignition is not switched on.
Compact Desktop Charging Stand (DCV-1B)
Used together with the Standard Travel
Charger (ACP-7U) or the Rapid Travel Charger
(ACP-8U), the Desktop Charging Stand is an
economical choice when you need your phone
close at hand, always ready for calls.
This charging stand allows you to charge your
phone’s battery in an upright, obtainable position on your desk.
[ 114 ]
20.Troubleshooting
This section provides a table that lists some of the most commonly
encountered problems and provides possible solutions.
Problem
Possible cause
Possible solution
My phone isn’t
charging.
The charger and the
phone are not properly charger to the phone.
connected.
Securely connect the
The charger is not
properly plugged in.
Make sure that the
charger is plugged in
correctly.
My phone isn’t
making/answering
calls.
The battery is not
charged.
Charge the battery.
The signal strength is
poor.
If you are indoors, move
toward a window.
I can’t listen to my
voice messages.
You don’t have voice
mail service.
Call yourwirelessservice
provider.
You have not set up your Call yourwirelessservice
voice mailbox with your provider.
service provider.
voice mail number in
your phone.
The voice mail number Call yourwirelessservice
you have saved is
incorrect.
provider.
You have forgotten your Call yourwirelessservice
password or are entering provider.
it incorrectly.
[ 116 ]
Frequently asked questions (FAQ)
21. Frequently asked
questions (FAQ)
This section lists and answers the questions that you most frequently ask.
Where necessary, the answers refer you to the appropriate section within
this guide.
Note: Some of the answers tell you to use menu shortcuts. For a
complete listing of these shortcuts, refer to “List of menu
Q. Why doesn’t the phone answer a call when I press any keys?
A. Make sure the keypad is not locked. Then you can press any key -
except
or Decline - to answer a call.
Q. How do I unlock my phone?
A. Press Menu 4 6 1, enter your PIN code, and press OK. Scroll to Off and
press OK.
Q. How do I lock my phone?
A. Press Menu 4 6 1, enter your PIN code, and press OK. Scroll to On and
press OK.
Q. What is my lock code?
A. The lock code enables you to lock your phone, thus preventing
someone else from using it. The default lock code is 1234 (depending
on your service provider). However, it is suggested that you change
this code immediately.
[ 117 ]
Q. What is my security code?
A. The default security code is 12345. However, it is suggested that you
change this code immediately. Certain features can be used only after
the correct security code has been successfully entered.
Q. How do I lock the keypad?
A. Press Menu
.
Q. How do I unlock the keypad?
A. Press Menu
.
Q. How do I make the ringing louder?
Q. How do I change the ringing tone?
Q. How do I store my voice mailbox number?
A. Press Menu 1 9 2. Enter your voice mailbox number, then press OK.
This number can be up to 32 digits long.
This voice mailbox number is valid unless your phone number
changes. If your phone number changes, you will have to save a new
voice mailbox number.
information.
[ 118 ]
Frequently asked questions (FAQ)
Q. How do I call my voice mailbox number (retrieve voice messages)?
When your phone alerts you to new voice messages, press Listen and
follow the prompts. If you’d rather listen later, press Exit.
To listen to your voice messages at a later time, perform one of the
following actions:
•
If you’ve saved your voice mailbox number in your phone, press
and hold to call your voice mailbox.
•
Call your voice mailbox number as you would any other telephone
number, then follow the directions provided.
See “Voice mail++” on page 34 for more information.
Q. How do I find my phone’s model number?
A. Turn off your phone, then remove the battery from the back of the
phone. Read the sticker that is inside and you will find, after the word
Model, your phone’s model number.
Q. How do I redial the last-dialed number?
A. Press
Q. How do I assign a key to 1-touch dialing?
A. Press Names, scroll to 1-touch dialing, and press Select.
Scroll to the number you want to assign a 1-touch dial number and
press Assign.
Note: If you have numbers saved in SIM memory, the first nine
numbers are stored automatically stored in keys 1through 9
as 1-touch dial numbers.
Scroll to the phone book entry that you want to assign to this key and
press Select.
Repeat these steps as many times as necessary. Refer to “1-touch
dialing” on page 50 for more information.
[ 119 ]
Q. How do I find out how many memory locations the phone has?
A. Press Names and scroll to Options.
Press Select.
Scroll to Memory status and press Select again. A message appears
that says Phone: xx free, xx in use where xx indicates the amount of
memory locations. Scroll to see SIM card memory status.
Q. How do I find my phone’s IMEI number?
A. Turn your phone off, open the rear sliding cover, then remove the
battery. Your phone’s IMEI number is printed on the sticker inside the
battery cover, under the first bar code. Or press
.
06
Q. How can I change the contrast of my phone’s display?
A. The contrast of your phone’s display is fixed and cannot be changed.
[ 120 ]
NOKIA One-Year Limited Warranty
22.NOKIA One-Year
Limited Warranty
Nokia Mobile Phones, Inc. (“NMP”) warrants that this cellular phone
(“Product”) is free from defects in material and workmanship that result
in Product failure during normal usage, according to the following terms
and conditions:
1. The limited warranty for the Product extends for ONE (1) year beginning
on the date of the purchase of the Product.
2. The limited warranty extends to the original purchaser of the Product
(“Consumer”) and is not assignable or transferable to any subsequent
purchaser/end-user.
3. The limited warranty extends only to Consumers who purchase the
Product in the United States.
4. During the limited warranty period, NMP will repair, or replace, at
NMP's option, any defective parts, or any parts that will not properly
operate for their intended use with new or factory rebuilt replacement
items if such repair or replacement is needed because of product
malfunction or failure during normal usage. No charge will be made to the
Consumer for any such parts. NMP will also pay for the labor charges
incurred by NMP in repairing or replacing the defective parts. The limited
warranty does not cover defects in appearance, cosmetic, decorative or
structural items, including framing, and any non-operative parts. NMP's
limit of liability under the limited warranty shall be the actual cash value
of the Product at the time the Consumer returns the Product for repair,
determined by the price paid by the Consumer for the Product less a
reasonable amount for usage. NMP shall not be liable for any other losses
or damages. These remedies are the Consumer’s exclusive remedies for
breach of warranty.
[ 121 ]
5. Upon request from NMP, the Consumer must prove the date of the
original purchase of the Product by a dated bill of sale or dated itemized
receipt.
6. The Consumer shall bear the cost of shipping the Product to NMP in
Melbourne, Florida. NMP shall bear the cost of shipping the Product back
to the Consumer after the completion of service under this limited
warranty.
7. The Consumer shall have no coverage or benefits under this limited
warranty if any of the following conditions are applicable:
a) The Product has been subject to abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper installation, or other acts
which are not the fault of NMP, including damage caused by shipping.
b) The Product has been damaged from external causes such as collision
with an object, or from fire, flooding, sand, dirt, windstorm, lightning,
earthquake or damage from exposure to weather conditions, an Act of
God, or battery leakage, theft, blown fuse, or improper use of any
electrical source, or damage caused by the connection to other products
not recommended for interconnection by NMP.
c) NMP was not advised by the Consumer in writing of the alleged defect
or malfunction of the Product within fourteen (14) days after the
expiration of the applicable limited warranty period.
d) The Product serial number plate or the accessory data code has been
removed, defaced or altered.
e) The defect or damage was caused by the defective function of the
cellular system, by inadequate signal reception by the external antenna,
or by viruses or other software problems introduced into the Product.
8. Nokia does not warrant uninterrupted or error-free operation of the
Product. If a problem develops during the limited warranty period, the
Consumer shall take the following step-by-step procedure:
[ 122 ]
NOKIA One-Year Limited Warranty
a) The Consumer shall return the Product to the place of purchase for
repair or replacement processing.
b) If “a” is not convenient because of distance (more than 50 miles) or for
other good cause, the Consumer shall ship the Product prepaid and
insured to:
Nokia Mobile Phones, Inc.
Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL 32901
c) The Consumer shall include a return address, daytime phone number
and/or fax number, complete description of the problem, proof of
purchase and service agreement (if applicable). Expenses related to
removing the Product from an installation are not covered under this
limited warranty.
d) The Consumer will be billed for any parts or labor charges not covered
by this limited warranty. The Consumer will be responsible for any
expenses related to reinstallation of the Product.
e) NMP will repair or authorize the repair of the Product under the limited
warranty within 30 days after receipt of the Product by NMP or an NMP
authorized service center. If NMP cannot perform repair covered under
this limited warranty within 30 days, or after a reasonable number of
attempts to repair the same defect, NMP at its option, will provide a
replacement Product or refund the purchase price of the Product less a
reasonable amount for usage.
f) If the Product is returned to NMP during the limited warranty period,
but the problem with the Product is not covered under the terms and
conditions of this limited warranty, the Consumer will be notified and
given an estimate of the charges the Consumer must pay to have the
Product repaired, with all shipping charges billed to the Consumer. If the
estimate is refused, the Product will be returned freight collect. If the
Product is returned to NMP after the expiration of the limited warranty
period, NMP's normal service policies shall apply and the Consumer will
be responsible for all shipping charges.
[ 123 ]
9. The Product consists of newly assembled equipment that may contain
used components that have been reprocessed to allow machine
compliance with Product performance and reliability specifications.
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF
THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE
FOREGOING LIMITED WARRANTY IS THE CONSUMER'S SOLE AND
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED. NMP SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF
ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE,
PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED
EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR
FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING
CUSTOMERS, AND INJURY TO PROPERTY, RESULTING FROM THE PURCHASE
OR USE OF THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY,
BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL
OR EQUITABLE THEORY, EVEN IF NMP KNEW OF THE LIKELIHOOD OF SUCH
DAMAGES. NMP SHALL NOT BE LIABLE FOR DELAY IN RENDERING
SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE
PERIOD THAT THE PRODUCT IS BEING REPAIRED.
11. Some states do not allow limitation of how long an implied warranty
lasts, so the above one-year warranty limitation may not apply to you (the
Consumer). Some states do not allow the exclusion or limitation of
incidental and consequential damages, so certain of the above limitations
or exclusions may not apply to you (the Consumer). This limited warranty
gives the Consumer specific legal rights and the Consumer may also have
other rights which vary from state to state.
12. NMP neither assumes nor authorizes any authorized service center or
any other person or entity to assume for it any other obligation or liability
beyond that which is expressly provided for in this limited warranty
including the provider or seller of any extended warranty or service
agreement.
[ 124 ]
NOKIA One-Year Limited Warranty
13. This is the entire warranty between NMP and the Consumer, and
supersedes all prior and contemporaneous agreements or understandings,
oral or written, and all communications relating to the Product, and no
representation, promise or condition not contained herein shall modify
these terms.
14. This limited warranty allocates the risk of failure of the Product
between the Consumer and NMP. The allocation is recognized by the
Consumer and is reflected in the purchase price of the Product.
15. Any action or lawsuit for breach of warranty must be commenced
within eighteen (18) months following delivery of the Product.
16. Questions concerning this limited warranty may be directed to:
Nokia Customer Service
7725 Woodland Center Blvd., Ste. 150
Tampa, FL 33614
Telephone: 1-888-NOKIA2U (1-888-665-4228)
Facsimile: (813) 287-6612
TTY Users: 1-800-24NOKIA (1-800-246-6542)
17. The limited warranty period for NMP supplied attachments and
accessories is specifically defined within their own warranty cards and
packaging.
©Nokia is a registered trademark of Nokia Corporation.
[ 125 ]
C
23. Index
calculator 93
calendar 87
call costs features 56
call forwarding 43
call log 31
Numerics
1-touch dialing
call timers 55
assigning a number 50
call a 1-touch number 51
change a 1-touch number 51
erase a 1-touch number 51
call waiting 37
caller groups
add names 53
assign ringing tone 53
graphics 54
A
remove names 53
rename 53
active call options
activate/cancel call waiting 37
answer a waiting call 37
call waiting 37
end the active call 38
reject a waiting call 38
switch between calls 38
third call waiting 38
answer a call 17
caller ID 18
calling card calls
choose a calling card 46
make a calling card call 47
save calling card information 45
clock
alarm 90
display the clock 64
set the clock 63
conference calls 42
contact Nokia 8
convert currency 94
automatic redial 45
B
battery
charge 10
install 10
business cards
deleting 93
saving 93
sending 92
viewing 92
D
display language 63
downloading ringing tones 99
[ 126 ]
Index
E
L
emergency calls 106
END key 17
label 2
lights
entering letters and numbers
special characters 27
standard text input 25
car profile 63
lock codes
PIN codes 67
PUK codes 68
F
fixed dialing 70
M
make a call 16
make an international call 51
memory 31
G
games 98
menus
list of items 21
selecting a menu 19
missed calls 32
I
in-call options
access menus 41
access the phone book 41
conference calls 42
end all calls 41
N
network services 7
make a new call 39
mute the microphone 41
put a call on hold 39
send touch tones 40
infrared
P
phone book
edit names and numbers 30
erase names and numbers 30
find names 29
printing 97
receiving information 95
sending information 96
phone book menus 52
save names and numbers 28
picture messages
sending 84
K
sending with text 85
viewing 86
keys and features
back 5
power key 5
Press 51
bottom 6
front 5
left side 6
[ 127 ]
profiles
customizing 58
renaming 62
selecting 36
U
user groups 72
R
V
redial last number 18
reject a call 18
vibrating alert 60
voice dialing
restore factory settings 63
add a voice tag 47
change a voice tag 49
erase a voice tag 49
make a call with voice
recognition 48
S
safety guidelines 1
scroll bar 20
scroll keys 19
security code 66
selection keys 19
SIM card 9
play back a voice tag 49
voice mail
listen to your messages 34
save the mailbox number 35
volume
system select 73
earpiece 13
T
keypad tones 58
ringing 60
talk key 16
text messages
erasing 81
W
warning and game tones 61
warranty 121
forwarding 82
reading 81
welcome note 3
replying 82
resending 80
sending 79
set up 74
writing with predictive
text input 75
writing with standard
input 75
touch tones 40
[ 128 ]
NOTES
[ 129 ]
NOTES
[ 130 ]
NOTES
[ 131 ]
Para obtener un manual del usuario en español favor de
llamar o enviar un fax al teléfono 1-888-NOKIA2U,
fax 813-249-9619.
[ 132 ]
|