User Guide
Keys
Retractable
antenna
(pull here to
extend it)
(Power key)
Press and hold to turn your phone on
or off.
Earpiece
Press the scroll
keys up or down
during a call to
adjust the lis-
tening volume.
(Softkeys)
Their current
function is dis-
played above
the key; these
labels change
whenaccessing
the various
(Scroll keys)
Scroll through
menus, sub-
menus, and the
phone book.
Press and hold
for continuous
scrolling.
phone features.
Menu
Names
Push this key to
end a phone
call or to return
to the start
screen.
Use this key to
dial and answer
phone calls.
Press to select
upper or lower
case letters
when editing
text. Press and
hold while
or
is
Press this key to
select special
characters when
entering text and
numbers.
displayed to
enter numbers
rather than
letters.
Use this key to enter an empty
space between letters when
entering text.
Indicators and Icons
You have an active call.
The phone is waiting for you to enter numbers or text.
You have turned off your phone’s keypad tones,
warning tones, message alert tones, and set your
ringing tone to Silent.
Keyguard has been activated to help prevent any
accidental keypresses.
.
You have one or more voice messages waiting.
You have one or more unread text messages waiting.
Digital service is available.
Your phone is roaming outside of your home system/
area.
Any characters you enter will be upper-case letters or
numbers. Press the
key to switch letter case.
Any characters you enter will be lower-case letters or
numbers. Press the key to switch letter case.
Appears when you press and hold the
key while
editing text. Only numbers can be entered while in
this mode.
The alarm clock is set.
Your phone is ready to place or receive a data call.
You have a reminder in your calendar to do something
(appears only on Calendar display).
You have a reminder in your calendar that it’s
someone’s birthday (appears only on Calendar
display).
You have a reminder in your calendar to call someone
(appears only on Calendar display).
You have a reminder in your calendar of a meeting
(appears only on Calendar display).
Table of Contents
i
ii
iii
14. Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
iv
1. Safety At A Glance
Read these simple guidelines before using your
phone. Failure to comply with these guidelines may
be dangerous or illegal.
Note: For more detailed safety information,
Road Safety Comes First
Don’t use a hand-held phone while driving; park the
vehicle first.
Switch Off In Hospitals
Switch off your phone when near medical
equipment. Follow any regulations or rules in force.
Switch Off On Aircraft
Mobile phones can cause interference. Using them
on aircraft is illegal.
Switch Off When Refueling
Do not use the phone at a refueling point. Do not use
near fuels or chemicals.
Switch Off Near Blasting
Do not use the phone where blasting is in progress.
Observe restrictions, and follow any regulations or
rules in force.
Interference
All mobile phones may get interference which could
affect performance.
Use Sensibly
Use only in the normal position (to ear). Avoid
unnecessary contact with the antenna when phone
is on.
Qualified Service
Only qualified service personnel may install or repair
cellular phone equipment.
Accessories and Batteries
Use only approved accessories and batteries. Do not
connect incompatible products.
1
FCC/Industry Canada Notice
Your phone may cause TV or radio interference (for example,
when using a telephone in close proximity to receiving
equipment). The FCC/Industry Canada can require you to stop
using your telephone if such interference cannot be eliminated.
If you require assistance, contact your local service facility.
This device complies with part 15 of the FCC rules. Operation is
subject to the condition that this device does not cause harmful
interference.
Using this Guide
The wireless phone described in this guide is approved for use in
AMPS 800, CDMA 800, and CDMA 1900 networks.
A number of features included in this guide are called Network
Services. They are special services provided by wireless service
providers. Before you can take advantage of any of these Network
Services, you must subscribe to the service(s) from your home
service provider and obtain instructions for their use.
Disclaimer
It’s possible that you may not be able to activate your phone on
all wireless systems. Please see your service provider for details.
2
2. Getting Connected
This section will help you understand the ins and outs of
charging and using your battery.
Attaching your battery
Simply place the battery
in the grooves on the
back of your phone. Then
slide the battery upward
until it clicks.
Note: Use only those
batteries approved by
the phone manufacturer
and recharge your
battery only with the
chargers approved by the manufacturer.
Charging your new battery
Your phone can be used with either a rechargeable Li-Ion
or NiMH battery. Note that a new battery’s full performance
is achieved only after two or three complete charge and
discharge cycles.
With your phone powered
on or off, connect the lead
from the charger to the
bottom of your phone.
You can also place your
phone on the charging
stand (with the stand
connected to a standard
120V AC outlet via either the ACP-7U or ACP-9U AC/DC
adaptors).
When the battery begins charging, your phone will beep
once and the battery strength indicator on the right side
of the display will begin to scroll after a few seconds.
3
If yourphone displays Not charging, charging issuspended.
Check that the battery is connected only to an approved
charging device. If the battery is very hot or cold, wait for
a while; charging will automatically resume after the
battery is restored to its normal operating temperature.
If charging still fails, contact your dealer.
When a charger is not in use, disconnect it from the power
source. Do not leave the battery connected to a charger for
longer than a week, since overcharging may shorten its life.
Important: If left unused, a fully charged battery will
discharge itself over time.
When is a good time to charge?
Actually, you can charge anytime. If you have a NiMH
battery, you should allow it to completely discharge once
in a while.
When your phone beeps once and displays Battery low,
you only have a couple of minutes of talk time remaining.
The repetition rate of these battery-low warnings depend
on the remaining battery capacity and the battery
condition. These warnings are more frequent when you’re
in a call.
Note: The phone will not give you the warning tone under
certain conditions. See “Warning and game tones”
Once all the power has drained from your battery, you’ll
hear three beeps with the message Recharge battery on
your display. At this point, your phone will switch itself
off and you’ll need to recharge your battery.
When is charging complete?
When the charge indicators stop scrolling, your
phone is considered fully charged. However, a
slight increase in charge may occur if your phone
is left connected to the charger for a couple more
hours. This is called “trickle charge” or
“maintenance charge.”
4
Charging times depend on the type of battery and
charger used.
For approximate charging and operating times, see
Can you make calls while charging?
Yes, you can. But your battery may not charge while a call
is in progress (depending on which charger you are
using). Charging should resume once you end the call.
information.
Discharging NiMH batteries
A NiMH battery lasts longer and performs better if you
fully discharge it from time to time. To discharge the
battery, leave your phone switched on until the battery is
drained. The phone will display several messages that the
battery is low and that you need to recharge it; just
ignore them.
You can also use the battery discharge feature of any
approved accessory available for your phone. Do not
attempt to discharge the battery by any means other
than those just described.
Removing the battery
Note: Switch off the phone before removing the battery!
1. Press and hold the
button at the top
of the battery.
2. Slide the battery
toward the bot-
tom of the phone.
3. Lift the battery off
the phone.
5
Important Battery Information
•
The battery can be charged and discharged hundreds
of times but it will eventually wear out. When the
operating time (talk time and standby time) is
noticeably shorter than normal, it is time to buy a
new battery.
•
Use only batteries approved by the phone manufac-
turer and recharge your battery only with the chargers
approved by the manufacturer. When a charger is
not in use, disconnect it from the power source.
Do not leave the battery connected to a charger for
longer than a week, since overcharging may shorten
its life. If left unused a fully charged battery will
discharge itself over time.
•
•
(NiMH batteries only) For optimal operation, discharge
the battery from time to time by leaving your phone
switched on until it turns itself off. You can also use
the battery discharge feature of any approved acces-
sory available for your phone. Do not attempt to dis-
charge the battery by any other means.
Temperature extremes will affect the ability of your
battery to charge: allow it to cool down or warm up
first.
•
•
Use the battery only for its intended purpose.
Never use any charger or battery which is damaged
or worn out.
•
Do not short circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip, or pen) causes direct connection of the + and -
terminals of the battery (metal strips on the back of
the battery), for example when you carry a spare
battery in your pocket or purse. Short circuiting the
terminals may damage the battery or the connecting
object.
6
•
Leaving the battery in hot or cold places, such as in a
closed car in summer or winter conditions, will reduce
the capacity and lifetime of the battery. Always try
to keep the battery between 59º F and 77º F (15º C
and 25º C). A phone with a hot or cold battery may
temporarily not work, even when the battery is fully
charged. NiMH batteries’ performance is particularly
limited in temperatures below 14º F (-10º C). Li-Ion
batteries’ performance is particularly limited in
temperatures below 32º F (0º C).
•
•
Do not dispose of batteries in a fire!
Dispose of used batteries in accordance with any
local regulations.
Cool Features
All the features in your phone are cool. It’s just that some
are cooler than others!
For example, did you know that you can lock the keys on
your phone to prevent accidental key presses and phone
calls? Or that you can call someone with the touch of a
single button? You can also stop your phone from ringing
without even answering the call.
These are just some of the many Cool Features you’ll find
in your phone. Look for the
owner’s manual to find them.
icon throughout this
7
3. Using Your Phone
The first few days you have your phone, play with it to
learn how the menu and submenu system works. The
more you learn how to access these menus and submenus,
the more fun you’ll have with your phone.
This section describes the different methods of using your
phone menus and submenus.
What is the ‘start screen’?
The start screen appears when you first turn your phone
on, in its idle state.
Anytime you want to get to the start screen, press
except during a call (unless you want to hang up).
,
CAUTION: If you press
when the phone is requesting
input (for example, a setting, phone number, name, etc.),
the phone displays the start screen and the input is not
saved.
Navigating tools
Softkeys
Your phone has two softkeys that
appear below the display. Their
current function is indicated by
the words appearing above them.
Simply press the corresponding key
under the choice you wish to select.
This illustration shows the phone at the start screen.
The start screen displays Menu on the left and Names
on the right. Menu allows you to access your phone’s
menus and submenus. Names allows you to access your
phone book.
8
Scroll key
Use the scroll key to navigate through your phone’s
menus and submenus. You can also use it to scroll
through names and numbers in your phone book.
Also, when editing names and numbers (for example,
numbers in your phone book), you may notice a cursor
flashing within the name or number. Pressing the scroll
key up or down moves the cursor within the text,
allowing you to insert letters, numbers, or special
characters via the keypad.
more details.
Scroll bar
When you access your phone’s menu and submenus,
you will notice a scroll bar at the far right of the
screen. This bar indicates where you are in the
menu structure; each “tab” on the bar represents a
different menu item.
For example, press Menu once. The scroll bar appears
with the first (top) tab displayed. A different tab appears
each time you press
or
to move up and down
through the menu structure. The scroll bar works the
same way with submenus.
Scrolling through the main menu
At the start screen, press Menu. Then scroll to the desired
menu item.
Press Select, Options or OK (whichever appears) to enter
submenus and to choose options.
Press Exit or Quit to exit the present menu or Back to go
back one level.
Tip: Pressing the
key returns you to the start
screen.
9
Menu and submenu numbering
When you scroll to a menu or submenu, the menu number
and/or submenu number appears on the display above
the scroll bar. If you become familiar with these numbers,
you can use them as shortcuts for accessing different
menus.
For example, when you scroll to Menu 2 (Call log) the
number 2 appears in the top right-hand corner of the
display. If you scroll to Menu 4 (Settings), submenu 3
(Security settings), your phone will display 4-3 in the
top right-hand corner.
with their menu locations.
Using Shortcuts
Now that you know about shortcuts, use them as a quick
and easy way to access a menu without having to scroll
through other menus. For example, to display the Dialed
calls menu (shortcut 2-3), press Menu
Note: When entering a shortcut that begins with “1”, you
must first press followed by “1” and any other
number(s). For example, to display the Inbox menu
(0-1-1-2), press Menu
.
.
When entering a shortcut, don’t wait more than a
moment between each key press.
For a summary of your phone’s menu structure, see
Help Text
If you’re not sure how a feature works, wait just a few
seconds and help text will automatically appear for most
of your phone’s features. Press More to see the next page
of the text or Back to exit the help text. After a while, the
help text will disappear by itself.
10
Summary of Menu Items and Shortcuts
Messages................................................................................................ 0-1
Text messages...............................................................................0-1-1
Write new1...............................................................................0-1-1-1
Inbox...........................................................................................0-1-1-2
Outbox1 .....................................................................................0-1-1-3
Saved..........................................................................................0-1-1-4
Erase...........................................................................................0-1-1-5
All read............................................................................0-1-1-5-1
All in inbox.....................................................................0-1-1-5-2
All in outbox..................................................................0-1-1-5-3
All saved..........................................................................0-1-1-5-4
Voice messages............................................................................0-1-2
Listen to voice messages....................................................0-1-2-1
Voice mailbox number.........................................................0-1-2-2
Clear voice message icon1.................................................0-1-2-3
Welcome note..............................................................................0-1-3
1 - Availability depends on your arrangement with your service
provider.
Call log..........................................................................................................2
Missed calls........................................................................................ 2-1
Received calls................................................................................... 2-2
Dialed calls......................................................................................... 2-3
Clear call lists................................................................................... 2-4
All......................................................................................................2-4-1
Missed.............................................................................................2-4-2
Received.........................................................................................2-4-3
Dialed..............................................................................................2-4-4
Call timers........................................................................................... 2-5
Last call ..........................................................................................2-5-1
All calls ...........................................................................................2-5-2
Life timer .......................................................................................2-5-3
Clear timers ..................................................................................2-5-4
Profiles..........................................................................................................3
Normal1................................................................................................. 3-1
Select...............................................................................................3-1-1
Customize......................................................................................3-1-2
Ringing options................................................................3-1-2-1
Ringing volume ................................................................3-1-2-2
Ringing tone ......................................................................3-1-2-3
Vibrating alert ...................................................................3-1-2-4
Keypad tones .....................................................................3-1-2-5
Warning and game tones.............................................3-1-2-6
Message alert tone..........................................................3-1-2-7
Lights ....................................................................................3-1-2-8
Automatic answer ...........................................................3-1-2-9
Rename ..........................................................................................3-1-3
11
Silent ......................................................................................................3-2
Meeting ................................................................................................3-3
Outdoor.................................................................................................3-4
Pager.......................................................................................................3-5
Handsfree............................................................................................3-6
Headset.................................................................................................3-7
1 - Menu items that appear under the Normal profile also
appear under all other profiles, but the second digit of the
shortcut differs. For example, the shortcut for the Ringing
options menu item for the Normal profile is 3121; for the
Silent profile, the shortcut is 3221.
Settings.........................................................................................................4
Call settings.......................................................................................4-1
Emergency key 9........................................................................ 4-1-1
Automatic redial........................................................................ 4-1-2
Calling card.................................................................................. 4-1-3
Anykey answer ........................................................................... 4-1-4
Minibrowser confirmation1 .................................................. 4-1-5
Incoming data/fax call ............................................................ 4-1-6
Phone settings..................................................................................4-2
Clock............................................................................................... 4-2-1
Alarm clock.................................................................................. 4-2-2
Touch tones ................................................................................. 4-2-3
Restore factory settings......................................................... 4-2-4
Language...................................................................................... 4-2-5
Security settings.............................................................................4-3
Restrict calls................................................................................ 4-3-1
Access codes ............................................................................... 4-3-2
Network services............................................................................4-4
Voice privacy1 ............................................................................. 4-4-1
Call forwarding2 ........................................................................ 4-4-2
Call waiting2................................................................................ 4-4-3
Send own caller ID with next call2..................................... 4-4-4
Network feature setting......................................................... 4-4-5
NAM selection............................................................................ 4-4-6
NAM update1 .............................................................................. 4-4-7
Automatic update of service1 .............................................. 4-4-8
1 - Availability depends on your arrangement with your service
provider.
2 - This menu item will not appear until the feature has been
12
System1 .........................................................................................................5
Home only
Automatic A
Automatic B
Analog
1 - The list of menu items may differ according to service
provider.
Games.............................................................................................................6
Memory................................................................................................. 6-1
Snake...................................................................................................... 6-2
Logic........................................................................................................ 6-3
Dice.......................................................................................................... 6-4
Calculator...................................................................................................7
Calendar.......................................................................................................8
Minibrowser1 ...........................................................................................9
1 - Availability depends on your arrangement with your service
provider.
Keyguard....................................................................................................10
13
4. The Basics
You have purchased a powerful phone, with lots of features.
Read this section for some very basic information on how
to use your phone.
A more comprehensive description of your phone is
Switching the phone on and off
Press and hold the
phone on or off.
key for two seconds to switch the
Switching off with the
key
Quickly press the
key (Switch off! will appear,
highlighted) then press OK.
Warning: Do not switch on the phone when wireless phone
use is prohibited or when it may cause interference
or danger.
information.
Getting a strong signal
For best results, fully extend the antenna. Your phone
operates on radio waves, and the quality of radio reception
depends on the strength of the radio signal in your area.
This radio coverage is maintained by a wireless network
and the quality of calls on a wireless phone depends on
the strength of the wireless radio signal.
Note: TIP ON EFFICIENT OPERATION: As with any other
radio transmitting device, do not touch the antenna
unnecessarily when the phone is switched on.
Contact with the antenna affects call quality and
may cause the phone to operate at a higher power
level than otherwise needed.
If your phone does not detect service at power up, the
message Searching for service will be displayed.
The phone will continue to search for available service for
14
15 minutes, at which time it will display No service if
none is found. The phone will periodically continue to
search for service.
Note: The phone will not work in analog mode while
searching for digital service.
Checking signal strength
call, the strength of the radio signal is indicated
by the signal indicators on the left side of your
phone’s display. These indicators will move up
as the strength of the signal increases and
down as it decreases.
Increasing your phone’s signal may be easy. Try moving
your phone slightly, or move towards a window if you’re
calling from inside a building.
Making a call
Your cellular phone does not have a dial tone. Simply
enter the phone number (including area code, as needed)
and press
. Hold the phone as you would any other
telephone, with the antenna pointed up and over your
shoulder.
Editing a number on display
If you make a mistake while entering a number to dial,
press
to move the cursor to the left and
to move it
to the right. To delete the character to the left of the
cursor, press Clear. To delete all characters, press and hold
Clear.
Dialing a phone number stored in the phone book
View stored names and numbers by pressing
or
Calling card calls
15
Emergency calls
Ending a call
Press
Answering a call
Press any key except
or
.
Note: This assumes that Anykey
answer (Menu 4-1-4) is set to
On and Keyguard (see next
paragraph) is not activated.
If keygaurd is activated, you must press
answer the call.
to
If you don't wish to answer the call, it will be forwarded
to your voice mailbox (if you have a voice mail subscription).
To stop your phone from ringing, press
. While the
name of the person who is calling and the message
calling is still displayed, you can still answer the call.
Keyguard
This feature helps to prevent
accidental key presses (for example,
when your phone is in your pocket
or purse) by disabling your keypad.
If any key is pressed while Keyguard
is activated, a message appears: Press Unlock and then *.
Activating Keyguard
•
Press and hold
until Keys locked appears
(if you do this during a call, the call will end), OR...
•
•
•
Press Menu , OR...
Press Menu 1-0, OR...
At the start screen, press Menu, scroll to
Keyguard, then press Select
When activated, the message Keys locked appears.
16
Deactivating Keyguard
•
Press Unlock, then
, OR...
•
Press and hold
until Unlock keys? appears,
then press OK
Answering a call with Keyguard active
Only the
key will answer the call. After you end the
call, Keyguard automatically becomes active again.
Some notes about Keyguard
• Calls may be possible to the official emergency num-
ber (for example, 911) programmed into your phone.
The number is displayed only after you have keyed in
its last digit. To initiate the call, press
.
• The Emergency key 9 will not work with Keyguard
enabled.
• You must deactivate Keyguard prior to turning off
your phone.
• Pressing the
for 15 seconds.
key quickly turns the display lights on
• When the phone is connected to a handsfree device
(other than a headset), keyguard is automatically
turned off . When disconnected from the device, it
is automatically turned on.
Ending a Call
Press
.
Note: To clear any characters from the display, press
again.
17
5. Your Phone A to Z
ABC/abc mode
This allows you to enter upper and lower case alphanumeric
characters into your phone. This is necessary for entering
names and numbers into your phone book, as well as
editing any existing alphanumeric characters.
information.
Access codes
This is a security feature that allows you access to certain
phone features.
Alarm clock
The alarm clock uses your phone’s
clock and can be set in advance to
sound an alert at a designated time.
You can also turn your phone off
after you’ve set the alarm. Your phone will automatically
wake up and sound the alarm at the specified time.
The volume for the alarm clock is determined by the
current ringing volume.
Note: If you have selected the Silent or Meeting profile,
your alarm will only beep once. The best profile
to use while using the alarm clock is Normal or
Outdoor, unless these have been modified from
their original settings or renamed.
phone’s clock.
Setting the alarm clock
1. Press Menu 4-2-2 (Settings - Phone settings -
Alarm clock).
18
2. Enter time you wish to set alarm (for example, enter
07:00 to set the alarm to 7:00; remember if your
clock is 24-hour or am/pm). Existing digits will be
replaced with the new alarm time.
3. Press OK.
Note: Step 4 appears only if you have selected am/pm
format. See “Selecting time format” on page 32
for more information.
4. Select either am or pm and press OK.
When the alarm goes off
Press Stop to shut off the alarm.
Snoozing
Press Snooze.
The alarm will go off again in 10 minutes. If you let the
phone alarm for 1 minute without pressing a key, it stops
alarming for 10 minutes then starts again.
If you turn off the phone
If you turn off the phone and the alarm is set, the phone
switches itself on at alarm time, then the alarm sounds.
To shut off the alarm, press any key except Snooze.
The phone displays Keep the phone on? Press Yes to
keep it on or No to switch it off.
Note: If you do not make a selection after 1 minute, the
phone will automatically shut itself off.
If you press Snooze, the phone turns itself off for 10
minutes, then back on to sound the alarm.
REMEMBER! Do not switch on the phone when wireless
phone use is prohibited, or when it may cause interference
or danger.
Turning the alarm clock off
Press Menu 4-2-2 (Settings - Phone settings - Alarm
clock), then scroll to Off and press OK.
19
All calls timer
This feature keeps track of the approximate time you
have spent on all calls with your phone.
Anykey answer
This feature allows you to answer an incoming call by
pressing any key except
or . The default setting
for this feature is On. To enable or disable Anykey answer,
press Menu 4-1-4.
Automatic answer
This is a setting found in your phone’s profile settings,
When this feature is turned on, your phone answers
incoming voice calls after one ring.
Note: Handsfree and Headset profiles will not appear in
your phone until you have connected an approved
handsfree device or a headset to your phone at least
once.
Activating automatic answer
1. Press Menu 3 (Profiles).
2. Your phone lists each profile. Scroll to highlight the
Handsfree or Headset profile, then press Options.
Note: Handsfree and Headset will not appear in the list
unless the phone has already been connected to a
handsfree device or headset.
3. Highlight Customize and press OK. Scroll to
Automatic answer, then press Select again.
4. Scroll to On and press OK.
Note: This feature will not function with data calls.
Automatic redial
This feature attempts to redial numbers that are busy due
to the wireless network. It will not redial numbers to a
busy party.
20
Your phone will redial the number you’re trying to call up
to 3 times after you hear a quick, busy signal. Press Quit
or
to stop the call attempts.
Activating automatic redial
Press Menu 4-1-2 (Settings - Call settings - Automatic
redial), then scroll to On and press OK.
Calculator
Your phone’s calculator adds,
subtracts, multiplies, and divides.
Warning: Your phone must be
switched on to use this feature.
Do not switch on the phone when
wireless phone use is prohibited or when it may cause
interference or danger.
Using the calculator
1. Press Menu 7 (Calculator).
2. With the screen that contains a “0”, enter the first
number in the calculation (press # for decimal point).
3. To add, press ∗ (+ appears)
To subtract, press ∗∗ (- appears)
To multiply, press ∗∗∗ (* appears)
To divide, press ∗∗∗∗ ( / appears)
To insert a decimal, press the # key
4. Enter the second number.
Repeat these steps as needed. To clear one digit at a time,
press Clear. To clear all digits, press and hold Clear.
5. Press Options. With Equals highlighted, press OK.
Note: You can also choose Add, Subtract, Multiply, and
Divide from the list of options.
21
Calendar
The calendar helps you keep track
of appointments, birthdays or
meetings. It can even sound an
alarm when it’s time for you to
make a call or go to a meeting.
Warning: Your phone must be switched on to use this
feature. Do not switch on the phone when
wireless phone use is prohibited or when it may
cause interference or danger.
Note: Your phone must remain on to use the calendar’s
alarm feature. If your phone is off, the alarm will
not sound at its scheduled time.
Using the calendar
1. Press Menu 8 (Calendar).
2. If you are not in a digital network, you will be
prompted to set your phone’s time and date.
When your phone prompts you for the time with
hh:mm, enter the time in hours and minutes
(using two-digit fields), then press OK.
Note: Time format (24-hour or am/pm) is set using the
Clock. See “Clock” on page 32.
When your phone prompts you for the date with
mm/dd/yyyy, enter the month and day (using two-
digit fields) and year (using a four-digit field), then
press OK.
Tip: Use the scroll keys to move the cursor left and right.
When you enter a digit, it writes over the number to the
right of the cursor.
3. Your phone now displays the current day. You can
also scroll to different days.
4. Once you’re at the date you want, press Options.
Then scroll to highlight the option you want, and
press Select. The options are:
22
Option 1: View day notes
With this option, you can view the notes of the day
currently on display. (If there are no notes associated
with the day, No notes for selected day appears.)
Scroll through the notes. Each note allows you to
choose the following Options:
Erase clears the note from your calendar.
Edit gives you the same prompts you got when you made
the note.
Move gives you the date prompt so you can move the
note to another date.
Option 2: Make note
With this option, you’ll need to choose Reminder, Call,
Meeting, or Birthday. Your phone will prompt you for
more information depending on which one you choose.
You can also set an alarm for any calendar note.
help with entering information at the Subject:
prompt.
Note: When the alarm goes off, you can press Postponeor
OK. Press OK to shut off the alarm.
Option 3: Erase notes
With this option, you’ll need to choose which notes to
erase. If you choose all the notes for the day currently on
display (Of chosen day), or One by one (for all notes in
the calendar), your phone presents each note to you with
the option Erase or Back.
If you choose All at once, your phone will delete all
calendar notes. When prompted to confirm the erase,
press Yes or No.
Option 4: View all notes
This allows you to view the notes of the entire calendar.
Scroll through the notes. Calendar memory empty will
appear if there are no notes in the calendar.
23
Option 5: Go to date
Enter the date you wish to go to.
Option 6: Set the date
Enter the day and month (using two-digit fields) and year
(using a four-digit field), then press OK.
Note: This option is necessary only if network date and
Call forwarding
This network service is used to forward incoming calls to
another number so you won’t miss an important call.
Check with your service provider for details.
Before you can activate this feature, you should first
store the feature code given to you by your service
provider. Otherwise, this feature may not appear in the
menu or function properly.
However, you can use the feature code manually, if you
choose, by including the feature code in front of the
phone number to which you wish to forward your calls
(for example, *72 555 1212).
If the code you store is not correct, the Call forwarding
feature will not work.
1. Press Menu 4-4-2 (Settings - Network services -
Call forwarding).
2. Scroll to desired call forwarding feature
(see options below).
3. Press Select.
4. Highlight Activate and press OK.
5. Enter phone number at Number: (or press Search to
locate number in phone book) and press OK.
6. Your phone will attempt to call the network to confirm
the feature code you entered in Menu 4-4-5 (see
7. Once the feature code had been confirmed, the
feature is activated.
24
Call forwarding options
Forward all calls forwards all incoming calls.
Forward if busy forwards calls only when you’re on the
phone.
Forward if not answered forwards calls if you don’t
answer.
Forward if out of reach forwards calls if you are out of
the serving wireless network.
Cancel all call forwarding cancels all call forwarding
options you have made active.
Call log
This feature automatically keeps
track of numbers you’ve dialed,
numbers that have called you, and
the amount of time you’ve spent on
calls.
Using call log
1. Press Menu 2 (Call log).
2. Scroll to one of the following options, then press
Select or OK.
Tip: You can dial any of the phone numbers by pressing
while the number is on the display.
Call log options
When you access Dialed calls, Received calls, or Missed
calls and press Options, a list of options will appear.
Call time shows the date and time when the call was first
connected (if clock has been set).
25
Use number allows you to view the number stored in the
call log, save it in your phone book, or dial the number by
pressing
.
Save allows you to save the number into your phone book.
Erase will erase the number from the call list.
Call restrictions
This feature allows you to restrict incoming and outgoing
calls to and from certain numbers.
Call settings
This feature allows you to access and activate some of
your phone’s features.
Using call settings
1. Press Menu 4-1 (Settings - Call settings).
2. Scroll to one of the following options, then press
Select.
Call timers
Your phone automatically keeps
track of the approximate amount
of time you’ve spent in calls.
1. Press Menu 2-5 (Call log -
Call timers)
2. Scroll repeatedly to access the following options
Last call displays the duration of the last call.
26
Note: Current call timer can be accessed by pressing
Details while using the Last call timer. See page 34
for details.
All calls displays call duration of all calls made since
on how to clear call timers).
Life timer shows duration of all calls; this cannot be
Clear timers clears all call timers except the Life
Call durations are for the currently-selected NAM (phone
number). Your phone has separate timers for each NAM
your phone uses.
Note: The actual time invoiced for calls by your service
provider may vary, depending upon items such as
network features, rounding off for billing, and taxes.
Call waiting
If you have subscribed to call waiting, your phone will
beep during a call to let you know you have an incoming
call. Your phone may also display the incoming caller’s
identification
Answering an incoming call with call waiting
Press
.
Swapping between two calls
Press
.
Ending the calls
Press
to end both calls.
Activating call waiting
You can also activate this feature with your phone;
simply ask your service provider for the feature code,
store it into your phone, then activate it.
27
Note: This feature may not appear in your phone’s menu
or function properly until the feature code has been
stored.
details.
1. Press Menu 4-4-3 (Settings - Network services -
Call waiting).
2. Scroll to Activate (or select Cancel to cancel).
3. Press OK.
4. Your phone will attempt to call the network to confirm
the feature code you entered in Menu 4-4-5 (see
5. Once the feature code has been confirmed, the
feature is activated.
Caller ID
This is a network service that helps identify incoming
calls. Contact your service provider for details.
When Caller ID is active, your phone may display the
caller’s phone number. The caller’s name may also display
if their name and number has been stored in the phone
book or if the wireless network supports it.
Call or Call-caller ID unavailable will display when the
wireless network doesn’t recognize the calling number.
Also, Call-caller ID blocked may display if the calling
party has blocked caller ID.
Note: If you have stored a number more than once in your
phone book, and that number is stored each time
with a different name, then a name will not appear
when someone calls from that number.
phone book.
28
Calling card
If you wish to use a calling card for
long distance calls, you must first
store your calling card information
into your phone. Your phone can
store up to four calling cards.
Storing a calling card
1. Press Menu 4-1-3 (Settings - Call settings - Calling
card).
2. Scroll to the desired calling card, then press Options.
3. Scroll to Edit, press OK.
4. Enter security code and press OK.
phone’s security code.
5. Press Select at the Dialing sequence prompt. Use
the following chart to determine the dialing sequence
required by your long distance provider. Scroll to the
appropriate sequence for your card.
Press Select to confirm your choice.
Select this
If you use a
calling card from:*
You typically are required to:
dialing
sequence:
MCI, AT&T True
Choice, Sprint
Canada, Unitel
Dial 1-800 access number, then Access no.
+ phone no.
+ card no.
phone number, then card num-
ber (+ PIN if required)
networkMCI,
WorldPhone MCI
Dial 1-800 access number, then Access no.
+ card no.
card number (+ PIN if required),
then phone number
+ phone no.
GTE, PacBell, AT&T, Dial the prefix (any numbers
Prefix
+ phone no.
+ card no.
Stentor
that must precede the phone
number) and phone number
you want to dial, then card
number, (then PIN, if required)
Note: *These calling cards are frequently used with these
dialing sequences. However, they may vary and are
subject to change at the phone company’s discretion.
Note: The order of the steps to follow may vary, depending
on which dialing sequence your card uses.
29
6. Enter access number when prompted for the calling
card’s access number (usually the 1-800 number
listed on the back of the calling card), press OK.
Note: You can also retrieve the access number from your
phone book if it has already been stored. Simply
press Search, then scroll to find the number.
7. Enter card number and/or PIN when prompted to
enter calling card number and personal identification
number, then press OK. Press OK again at Save
changes?
8. Scroll to display Card name and press Select. Enter
card name using your phone’s keypad, then press OK.
need help on entering the card name.
Choosing a calling card to use
1. Press Menu 4-1-3 (Settings - Call settings - Calling
card).
2. Scroll to the desired card, then press Options.
3. Scroll to highlight Select and press OK.
4. Enter security code at Security code:, press OK.
5. Your phone will display Card ready for use.
Making calling card calls
Enter the phone number, including any prefix (such as 0
or 1) that your calling card may require when you make a
calling card call. See your calling card for instructions.
Press and hold
for a few seconds until your phone
displays Card call.
When you see Wait for tone, then press OK, listen for
the tone, then press OK. When you see Wait for tone,
press OK again, listen for the tone, then press OK.
Note: This procedure may not apply to all calling card
options programmed into your phone. Please look
at the back of your calling card or contact your long
distance company for more information.
30
Change lock code
This feature allows you to change your lock code.
Change security code
This feature allows you to change your security code.
Clear call lists
This feature will clear all dialed numbers, as well as
numbers of answered calls and missed calls. You cannot
undo this operation, so be careful.
1. Press Menu 2-4 (Call log - Clear call lists).
2. Highlight either All, Missed, Received, or Dialed
and press OK (All will clear all call lists, while the
others clear their respective call lists).
Note: When the Dialed calls list is cleared, the shortcut
list (the list that appears when you press
a scroll key) is also cleared.
and
Clear timers
This feature clears all call timers (except the life timer) for
the currently-selected NAM. The list of the last 10 dialed
numbers is also cleared (this is the list that appears when
you press
then
).
1. Press Menu 2-5-4 (Call log - Call timers - Clear
timers)
2. Enter security code at Security code: and press OK
Caution: Clearing call timers cannot be undone. If you are
using the call timers to log or track the amount of
time you are using your phone, you may wish to
record the call timers before you erase them.
page 45 for details.
31
Clock
Your phone contains a real-time
clock that can be set two different
ways: the clock can use the time and
date information provided by the
wireless system, or it can be set
manually.
The clock will display the current time and date on the
start screen. You can also choose to hide the clock if you
for details.
By default, the clock gets its information from the wireless
network. If you wish to override the network clock, do the
following:
Manually setting the clock
1. Press Menu 4-2-1 (Settings - Phone settings - Clock).
2. Scroll to Time settings, then press Select.
3. Scroll to Set clock, then press Select.
4. Enter the current time. For example, to enter 7:30,
enter 0730. Press OK.
5. Scroll to am or pm, then press OK.
Selecting time format
If you choose am/pm format, you will notice a small
indicator that appears to the right of the displayed time.
If the indicator is at the top, it’s in am; if on the bottom,
it’s in pm.
1. Press Menu 4-2-1 (Settings - Phone settings- Clock).
2. Scroll to Time format and press Select.
3. Scroll to either 24-hour or am/pm.
4. Press OK.
If you wish to revert back to the wireless system’s time,
do the following:
32
Allowing the network to set the clock
1. Press Menu 4-2-1 (Settings - Phone settings- Clock).
2. Scroll to Time settings, press Select.
3. Observe the text: Set by network, press Select again.
If you choose Set by network, your phone will display
Time is set.
Note: If you use the Set by network option while outside
your digital network, you will be prompted to enter
your own time (see above). Network time will replace
the time and date you set once you re-enter your
digital network.
Note: If your battery has been removed or has drained
outside the digital network, you will be prompted to
enter your own time only if the battery is replaced
or recharged while still outside of the digital
network (see above).
Displaying or hiding the clock
1. Press Menu 4-2-1 (Settings - Phone settings- Clock).
2. Depending on the current settings, either Hide time/
day or Show time/day will be highlighted.
3. Press Select.
Conference call
This feature allows you to add a third party to a call.
Note: This feature may not be available in all wireless
systems. See your service provider for details and
availability.
Making a conference call
1. While in a call, enter the second phone number and
press
.
Note: You can also make a third party call using the
in-call menu. While in a call, press Options and
scroll to New call. Enter the number you wish to
call and then press OK.
33
2. Once the third party answers, press
to connect
all three parties.
3. Press
party. Press
again if you wish to disconnect the third
to drop both parties.
Recalling a number from the phone book during
a conference call
1. During the call, press Options.
2. Scroll to Names and press OK.
3. Press Select at Search.
4. Enter name and press OK, or just scroll through the
phone book.
5. Press
.
Current call timer
This feature displays the running elapsed time on your
screen while a call is active. Once the call has ended,
simply press any key to clear the display (the display will
also clear automatically after 10 seconds).
Activating the current call timer
Press Menu 2-5 (Call log- Call timers) and press Details.
With Current call timer displayed, press Select, scroll to
On, and press OK.
Note: As with all call timers, the actual time invoiced for
calls by your service provider may vary, depending
upon items such as network features, rounding off
for billing, and taxes.
Customize profiles
This feature allows you to customize individual profiles.
34
Custom Tone
This feature allows you to assign a special ringing tone to
an entry in your phone book. When that person calls you,
you’ll be able to quickly identify the person based on the
special tone you hear.
•
•
•
In order to use this feature, Caller ID must be
available and active in your phone.
You can assign a custom tone to as many as 20
entries in your phone book.
If you have selected the Silent profile (Menu 3),
your phone will not ring with a normal tone or a
custom tone.
1. In your phone book, find the entry to which you want
to assign the custom ringing tone.
2. Press Details, then Options (or, if the scrolling view
for your phone book is set to Name+number, just
press Options).
3. Scroll to Custom tone, then press Select.
4. Scroll through the list of ringing tones until the
desired tone is highlighted.
•
•
If you wait a moment while a tone is highlighted,
you’ll hear the tone.
To “remove” the custom tone from the entry, select
Default.
5. Press OK.
Data and fax calls
Note: This feature is available only if your service provider’s
network supports data and fax calls. Data and fax
calls may also require that you subscribe to these
additional services. Please check with your service
provider before sending or receiving data or fax calls.
35
Your phone can function as a fax/modem when connected
to your PC or laptop computer via the optional data cable.
You must also have the appropriate fax or data software
installed and configured to send and receive data or faxes.
Dialed calls
Your phone automatically stores the
last 10 numbers you’ve dialed.
1. Press Menu 2-3 (Call log -
Dialed calls).
2. Scroll until the number appears.
3. Press
to dial the number.
You can also access the last 10 dialed numbers if you press
once, then scroll through the list.
Dialed calls options
Earpiece volume
During a call, you can adjust the listening volume of your
phone’s earpiece by pressing
or
.
Emergency calls
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press
.
Note: Your phone changes to emergency call mode. If you
choose to exit this mode, emergency operators may
not be able to contact you. Keep your phone in
emergency call mode until emergency personnel
arrive on the scene. In emergency call mode, some
menu items may not be available.
36
4. To exit emergency call mode, at the start screen, press
Exit. When the question Restore normal service?
appears, press OK.
IMPORTANT!
This phone, like any cellular phone, operates using radio
signals, cellular and landline networks, as well as user-
programmedfunctionswhich cannotguarantee connection
in all conditions. Therefore, you should never rely solely
upon any cellular phone for essential communications
(for example, medical emergencies).
Remember, to make or receive any calls, the phone must
be switched on and in a service area with adequate
cellular signal strength.
Emergency calls may not be possible on all cellular phone
networks or when certain network services and/or phone
features are in use. Check with local cellular service
providers.
If certain features are in use (keyguard, restrict calls, etc.),
you may first need to turn those features off before you
can make an emergency call. Consult this document and
your local cellular service provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your cellular phone may be the only
means of communication at the scene of an accident -
do not cut off the call until given permission to do so.
Emergency key 9
With this feature on, the phone attempts to make an emer-
gency call when you press 9, then
. The phone dials
the emergency number pre-programmed into your phone.
Note: You can also dial an emergency call by pressing and
holding 9 until the phone indicates it is attempting
to make an emergency call (unless Keyguard is ac-
tivated). This feature is also disabled while playing
games, using the calculator, or editing (such as when
using the Minibrowser or editing a phone book entry).
37
Activating Emergency key 9
Press Menu 4-1-1 (Settings - Call settings - Emergency
key 9), scroll to On to activate or Off to cancel, then
press OK.
Entering text and numbers
Note: If you’re able to send mobile messages from your
phone, you can use the predictive text input method
to write the message. See ‘Predictive text input’ on
You can enter text and/or numbers when storing infor-
mation into your phone via your phone’s keypad. When
you see the letter you wish to enter, simply press the key
associated with that letter until it appears on the display
(numbers also appear).
ABC mode
When you need to enter letters into your phone, it will
automatically switch over to
mode.
Your phone displays the
icon to indicate that your
phone is in ABC mode. It also displays when you are
viewing names rather than numbers.
When
is displayed, you can enter these characters:
Key
Characters
Key
Characters
. , ’ ? ! @ - 1
PQRS7
ABC2
DEF3
GHI4
JKL5
TUV8
WXYZ9
<space>, 0
(See below for details)
MNO6
Changes letter case
(ABC/abc); long press
toggles between letter
mode (ABC/abc) and
number mode (123)
38
While you’re editing a name,
moves the cursor to the
left, and moves it to the right. To clear the character
to the left of the cursor, press Clear. To clear all characters,
press and hold Clear.
To enter a space, press
.
ABC/abc mode (Changing letter case)
Press the # key to switch between upper and lower case
letters. The
icon will switch to
to indicate you
are using lower case.
123 mode
When storing names to the phone book, you can enter a
number within a name at any time. Simply press that
particular number key a few times until it appears, or
press and hold the key for the same result.
However, you can do this more quickly by accessing the
mode, without having to scroll through each letter
to access the number you wish to enter.
Simply press the
or
key for about 2 seconds while in
icon will appear. While
mode and the
in this mode, only numbers can be entered. Letters cannot
be entered unless your phone is in mode.
Press the # key again for a couple of seconds if you wish
to deactivate the mode.
Special characters (for storing names)
While in
a commonly used special character ( . , ‘ ? @ - ) by
pressing
until the character appears.
To display a list of all special characters, press
.
Scroll to highlight the character, then press Insert.
. , ? ! : ; - + # *
( ) ‘ “ _ @ & $ £ %
/ < > ¿ ¡ § = [ ] ¥
Tip: To quickly highlight a special character that appears
toward the end of the list, press
.
39
Special Characters
(for storing and calling numbers)
The following special characters are helpful when you
press the
key once or repeatedly, and the following
characters can be stored within the number sequence.
(p) creates a pause when a number is dialed; the
digits located to the right of the “p” are automati-
cally sent as touch tones after a 2.5 second pause
(w) creates a “wait” when a number is dialed.
The “w” makes your phone wait for you to press
Send or
, then it sends the digits located to the
You can add as many special characters as you need in a
single number sequence.
Erasing mobile messages
You can erase all mobile (text) messages quickly and
easily from the Text messages menu (Menu 0-1-1-5).
Erase options for your phone book
Fax calls
Note: This feature is available only if your service provider’s
network supports data and fax calls. Data and fax
calls may also require that you subscribe to these
additional services. Please check with your service
provider before sending or receiving data or fax calls.
Your phone can function as a fax/modem when connected
to your PC or laptop computer via the optional data cable.
You must also have the appropriate fax software installed
and Fax Calls” on page 93 for more information.
40
Games
You have four exciting games to choose from in your phone.
Press Menu 6 to choose one of the following games:
Note: REMEMBER! Your phone must be switched on to
use this function. Do not switch on the phone when
wireless phone use is prohibited or when it may
cause interference or danger.
Memory
Reveal pictures to find pairs in as few tries as possible.
Move the cursor with the 2 (up), 4 (left), 6 (right), and 8
(down) keys.
Press the 5 key to reveal pictures. Press the
jump right over revealed pictures or move from bottom
right to top left. Press the key to jump left over
key to
revealed pictures or move from top left to bottom right.
Once found, pairs stay visible.
Snake
Feed the snake with as many goodies as possible and
watch it grow. Use keys 2 (up), 4 (left), 6 (right), and 8
(down) to turn the snake toward food. The snake can only
turn 90 degrees at a time.
The more goodies the snake eats, the higher the score.
Using a higher level of difficulty increases the snake’s
speed but also increases the point value for each goodie.
If the snake hits its own tail or the surrounding wall, the
game is over.
You can also try using keys 1 (up and left), 3 (up and right),
7 (down and left), and 9 (down and right) to control the
snake’s direction.
Logic
Find a secret combination of figures. Available figures are
shown at the top of the display before you accept the first
guess row. Use the 2, 4 and 8 keys to move the cursor and
the 5 key to select the figure.
41
To copy a figure from a previously accepted guess row,
start scrolling with the 4 key, move the cursor to the
desired figure in the normal way and accept the selection
with the 5 key.
Once you think you have the right combination, press the
key. The result is presented as a set of marks over
the row. A correct figure in the right place gives a full
mark; a correct figure in the wrong place gives a half mark.
The game ends when all the figures are correct and in the
right place.
Dice
Use this to play other games that require a set of dice if
one isn’t available. Use the Level option to set the number
of dice, up to six. You can roll, lock, and unlock each die
as many times as you wish.
When you start a new game, the dice roll for a couple of
seconds and then stop. Use the 4 (left) and 6 (right) keys
to select a die. Press the 5 key to lock or unlock the
selected die.
Press
to roll the unlocked dice again.
Game options
When you select a game, you can choose from the
following submenus:
Level allows you to choose the level of difficulty, except
for Dice, which selects the number of dice you wish to
play with.
New game starts a new game.
Top score will display the selected game’s highest score
ever played with your phone (does not appear in Logic
or Dice).
Instructions will describe how the game is played.
Last view may appear in the options list when the game
ends.
Continue may appear in the options list if the game is
interrupted (for example, by an incoming call or when
you press
).
42
Inbox
When you receive a mobile message, it’s stored in the
Inbox. Your phone will display Message received, along
with the mobile message icon, and you will hear a tone
(unless you are in a call). Press the Read softkey to read
In-call menu
While you’re in a call, you may notice that Optionsappears
on your display. Pressing this key will access you to the
in-call menu, which allows you access to certain features
while you have a call active.
When you access the in-call menu, you may notice the
following choices:
Mute Allows you to mute the microphone; if your micro-
phone is already muted, Mute will change to End mute
Touch tones Allows you to manually enter a touch tone
Menu Allows you access most of your phone’s menu.
New call Allows you to place the call to the third party
page 33).
Keyguard
This feature disables the keypad to protect against
accidental keypresses.
Keypad tones
This is one of the settings in your phone’s profiles
when you press your phone’s keys.
Note that if you choose the Silent profile, keypad tones
will be turned off.
43
Setting the keypad tones
1. Press Menu 3 (Profiles).
2. Your phone lists each profile. Scroll to the profile
you want and press Options.
3. Highlight Customize and press OK. Scroll to Keypad
tones and press Select.
4. Scroll through the options; your phone plays a sample
of each tone. Press OK for the one you want.
Language
Because many wireless phone
customers speak English as a
second language, your phone
allows you to choose your
phone’s displayed language.
Choosing a language for your phone
1. Press Menu 4-2-5 (Settings - Phone settings -
Language).
2. Scroll to the language you wish to use and press OK.
Last call timer
This feature displays the duration of your last call.
Last number redial
When you want to call your last dialed number,
Press
, then
again.
Note: You must be at the start screen before you press
.
Letter case
You can change from upper to lower case when entering
letters into your phone.
page 39 for more details.
44
Life timer
The life timer displays the approximate total time of all
calls dialed and received with your phone (in hours and
minutes only). The life timer cannot be reset and is used
in conjunction with your phone’s warranty.
Press Menu 2-5-3 (Call log - Call timers - Life timer) to
view your phone’s life timer.
Note: The actual time invoiced for calls by your service
provider may vary, depending upon items such as
network features, rounding off for billing, and taxes.
Lights
This is one of the settings in your phone’s Handsfree profile
are on only when you use your phone, or if they are on at
all times. This setting works only when your phone is
connected to a handsfree device.
1. Press Menu 3 (Profiles).
2. Your phone lists each profile. Scroll to the profile
you want and press Options.
Note: Handsfreewill not appear in the list until the phone
has been connected to a handsfree device at least
one time.
3. Highlight Customize and press OK. Scroll to Lights
and press Select.
4. Scroll through your choices and press OK.
If you select Automatic, your phone’s lights are turned
off within fifteen seconds if no keys are pressed. If On is
selected, then the lights will remain on the entire time
your phone is connected to the handsfree device.
Listen to voice messages
If you have a voice mail account with your service provider,
this feature allows you to access your voice messages.
45
Lock code
You’ll need the lock code to activate and deactivate Phone
lock code is 1234 (or the last four digits of your phone
number, depending on your service provider). If you enter
an incorrect lock code five times in a row, your phone will
Changing your lock code
In a lock code, only numeric characters are accepted.
1. Enter Menu 4-3-2-3 (Settings - Security settings -
Access codes - Change lock code).
2. Enter lock code at Enter lock code: and press OK.
3. Enter new lock code, press OK.
4. Verify new lock code, press OK.
Note: When you change your lock code, make sure you
store it in a safe place, away from your phone. Avoid
entering access codes similar to emergency numbers
to prevent accidental emergency calls.
Manual touch tones
This setting determines how long touch tones are produced
as you press the keys on the keypad. Note that touch
tones are sometimes called DTMF tones.
Setting manual touch tones
Press Menu 4-2-3-1 (Settings - Phone settings - Touch
tones - Manual touch tones) and highlight one of the
following options, then press OK.
Continuous means the tone sounds for as long as
you press and hold the key.
Fixed sets the tone length to .1 second, regardless
of how long you press the key.
Off turns the tones off, and no tones will be sent
when you press the keys.
46
Memory status
This feature allows you to see how many free and in-use
memory locations are in your directory.
Press Names, scroll to Options and press Select. Then
scroll to Memory status and press Select again.
Messages
This feature allows you to access your voice and mobile
(text) messages, as well as composing your own welcome
note.
Using messages
1. Press Menu, then Select.
2. Scroll to one of the following options, then press
Select.
Message alert tone
This is one of the settings in your phone’s profiles
when you get a mobile (text) message.
1. Press Menu 3 (Profiles).
2. Your phone lists each profile. Scroll to the profile
you want and press Options.
3. Highlight Customize and press OK. Scroll to Message
alert tone, then press Select.
4. Scroll through your choices (your phone plays samples)
and press OK.
47
Microphone
You can mute and unmute your phone’s microphone while
a call is in progress. During a call, your phone’s softkeys
change from Menu and Names to Options and Mute.
Muting and unmuting your phone
You can mute the phone’s microphone during a call; simply
press Mute. To unmute the microphone, press Unmute.
If these texts are not available, press Options, scroll to
Mute or End mute and press Select.
Muting and unmuting also affect the microphones of any
accessories connected to the phone.
Minibrowser
Note: This feature is available only if your service provider's
network supports wireless internet access. Your
service provider may also require that you subscribe
to this additional service. For more information,
contact your service provider.
About the Minibrowser
Warning: Your phone must be switched on to use the
Minibrowser. Do not switch on the phone when
wireless phone use is prohibited.
Warning: Emergency Key 9 is disabled while you are in a
Minibrowser session.
The Minibrowser lets you browse the internet for information
such as stock quotes and weather. Browsing via the phone
is not like browsing using a PC. Site providers usually present
only the critical aspects of their site to wireless phone
users, so they have removed most graphics.
When you start the Minibrowser and connect to a network,
two icons appear in the display:
Minibrowser icon (you are in a Minibrowser session)
Active call icon (you are being billed accordingly)
48
After a certain period of inactivity, the Minibrowser
disconnects from the network. For this reason, you may
find that you are billed for several network connections
within a single session. This is normal and is designed to
minimize your bill. Rates will vary according to your
billing plan.
When the Minibrowser disconnects from the network, the
active call icon (
) disappears, but the Minibrowser
icon ( ) remains. While you are in the Minibrowser you
can still access pages stored in memory without being
connected to the Internet. However, if you navigate to a
page that is not stored in memory, a new Minibrowser
session begins and you'll be billed accordingly.
Launching the Minibrowser
The first time you launch the Minibrowser, you go through
a security setup process that takes 3 to 5 minutes (follow
the on-screen prompts).
1. From the start screen, press Menu, then scroll to
Minibrowser. The following message appears to re-
mind you that you may be billed for the connection
time. (You can disable this message. See ‘Disable
Browsing may
incur charges.
Continue?
(Yes)
(No)
2. Press Yes. After a few seconds, the Home Page appears.
(Your menu may vary according to your service
provider.)
Home Page
1 News
2 Yahoo!
3 Weather
4 Finance
5 Web site
Note: To end the Minibrowser session at any time, press
and hold
.
49
Minibrowser menu
While in the Minibrowser, press and release
(power key)
to display the Minibrowser menu:
Help - Show a help page for the current site (accessible
from some pages).
Home - Return to the Home page.
Bookmark page - Set a bookmark for the current page.
Show URL - Show the web address (Uniform Resource
Locator) for the current page.
Restart - Return to the Home page and delete all stored
pages.
Version - Show the version of Minibrowser software.
Advanced - Change server and encryption settings.
Exit Minibrowser - Exit the Minibrowser.
Switch off! - Turn off the phone.
About web page content
The following items may appear on web pages:
•
•
•
•
numbered options (some options may not be numbered)
links (embedded in content)
input fields for text or numbers
simple text
Navigating in the Minibrowser
Scroll through the menus and contents of a page
Press
(scroll key) to scroll through the menus and
contents of a page and to see the content of pages that
do not fit on one screen. To scroll quickly, press and hold
the scroll key.
Go back (previous page)
To go back to a previous page, press
.
50
Go to the Home Page
•
Press
repeatedly to move back through previously
viewed pages until the Home Page appears.
•
OR, press and release
to display the Minibrowser
menu, scroll to Home, then press OK.
Activate an item (for example, a link)
•
Press the appropriate number key on your phone’s
keypad (if the item on the page is numbered).
•
OR, scroll to the item, then press the appropriate
softkey (for example, to activate a link).
Softkeys
To navigate to different screens or select special
functions, use the softkeys. The function of each softkey
can change with each page and depends on each
highlighted item.
(Left softkey) - Usually selects the highlighted item,
but its function may change depending on what you
are doing.
(Right softkey) - Usually selects a secondary option
or displays a menu of secondary options.
Links
Links usually appear as items in a numbered list.
Depending on its type, when activated, a link will:
•
•
take you to another page or site
make a phone call (Some sites support this feature. When
you make the call, the browser connection terminates,
but the page you were viewing is stored in memory. After
you end the call, the page you were viewing is displayed
again and you can continue browsing.)
Activate a link
1. Move the cursor until the desired link is highlighted.
2. Press the appropriate softkey. (If the link is a phone
number, in some cases, you can also press
make the call.)
to
51
Bookmarks
You can set a bookmark for a web page so that you can
quickly go to that page later. (You may also be able to set
bookmarks via a personal account at your service provider's
web site.)
Set a bookmark
1. Go to the page for which you want to set a bookmark.
2. Press and release . The Minibrowser menu appears.
3. Scroll to Bookmark page, then press Select. (A mes-
sage may appear asking you to confirm this action.)
Go to a bookmarked page
1. From the Home Page, scroll to Bookmarks, then press
Select. A list of your bookmarks appears.
2. Select the bookmark that represents the page you
want go to, then press Select.
Tip: A number is associated with each bookmark in the
bookmark list. To quickly go to a bookmark, press and
hold the appropriate number key.
End the Minibrowser session
•
Press and hold
OR, Display the Home Page (If the Home Page is not
currently displayed, press repeatedly until it is
. Exit Minibrowser? appears.
.
•
displayed.) Press
Press Exit.
•
OR, press and release . Select Exit Minibrowser.
Disable Minibrowser confirmations
You can specify whether or not you want your phone to
confirm your choice to connect to the web or exit the
Minibrowser session.
1. Press Menu 4-1-5. The following options appear:
•
On connection - Before connecting to the web,
your phone prompts you to confirm your choice.
52
•
•
On exit - Before exiting the Minibrowser session,
your phone prompts you to confirm your choice.
Both - Your phone prompts you to confirm your
choice before connecting to the web and before
exiting the Minibrowser session.
•
Never - Your phone never prompts you to confirm
your choice.
2. Scroll to the appropriate option, then press OK.
Tip: To prevent unintentional exiting of the Mini-
browser session (such as when pressing repeatedly
to move back through previously viewed pages),
select Both or On exit. This will ensure that a
confirmation message appears before exiting.
Note: If you press and hold
, the Minibrowser session
ends without confirmation, regardless of the
Minibrowser confirmation setting.
Missed calls
If Caller ID is available, your phone will keep track of the
last 10 calls you have missed if you weren’t around to
answer the call. You can even find out what time they
called.
Missed calls will appear in your phone only if it was turned
on and in a service area when the call was missed.
If the display says ‘Missed call’
Press List. To call back the displayed number, press
.
Press Exit to go back to the start screen.
Note: Number will be displayed only if caller ID is available.
Missed call options
Checking the missed calls list anytime
Press Menu 2-1 (Call log - Missed calls), then scroll
through the list.
53
When the Forward if not answered option in the Call
will not treat the forwarded calls as missed calls.
call lists.
Mobile messaging
NAM selection
The Number Assignment Module (NAM) is the phone’s
storage location containing the assigned phone number
and other system information. This information is entered
by your service provider when programming your phone
when your phone is first activated.
In most systems, your phone can be activated in up to 2
different service areas (for example, one in Dallas and
another in Chicago), each giving your phone a different
phone number or account.
Only one number can be active at a time. When you select
a phone number, you’re also selecting which system you’re
page 73). The first phone number displayed with this
menu is the currently selected number.
Note: It may not be necessary to have two NAMs for your
phone if your service provider has service or roaming
agreements for each area in which you wish to use
your phone. Contact your service provider for details.
Selecting the NAM for your phone
1. Press Menu 4-4-6 (Settings - Network services -
NAM selection).
2. Scroll until the phone number you want to use
appears and press OK.
Note: You need at least one active number to make calls.
You cannot change from one NAM to another
during a call.
54
NAM update
The Number Assignment Module (NAM) in your phone
contains your assigned phone number(s) and other
system information that your service provider entered
during activation. The NAM update feature allows you to
easily activate or reactivate your phone without having
to go to your service provider. Updating the system
information in the NAM may improve your phone’s
coverage and performance.
Depending on your service provider, your phone is either
automatically updated or you can manually initiate an
update. During updating, the message Updating service...
and the active call indicator
may appear.
Automatic NAM update
While your phone’s power is turned on, the network
periodically initiates automatic updating. Depending on
your service provider, you can choose to deactivate
automatic updating. To deactivate automatic updating,
press Menu 4-4-8 (Settings - Network services -
Automatic update of service) and select No.
Manual NAM update
Usually, you manually update your phone after talking
with yourservice provider's customer service representative.
To manually initiate an update, press Menu4-4-7 (Settings
- Network services - NAM update) and select OK.
Note: In some cases, when you try to connect to your
service provider, the following message may appear on
the display before the call is initiated.
'Lock' prevents the service provider from changing
the lock code. 'Unlock' allows the provider to change
the code and restrict others from activating the phone.
If this happens, select the appropriate selection for your
phone. If you don’t want your service provider to change
your lock code, select Lock. If you want to allow your service
provider to change your code to prevent other service
providers from activating your phone, press Unlock.
55
If you wish to do neither and want to return to the start
screen, press and hold
.
Note: This feature may not be available in all systems.
Please contact your service provider for details
about the availability of this feature.
Network feature setting
services available through your service provider or dealer.
When you subscribe to any of these services, your service
provider or dealer gives you a separate feature code to
activate each service. Deactivation codes are used to
deactivate each service.
Once you store the appropriate code in your phone, the
service appears as a menu item. You can then use the
menu to activate and deactivate these services.
Note: These feature codes may already be stored in your
phone by your service provider. Check with your
service provider to confirm if these codes are
already configured in your phone.
Note: If your phone has more than one phone number
programmed, any feature codes stored will apply
only to your primary phone number, or NAM 1.
Storing feature codes
1. Press Menu 4-4-5 (Settings - Network services -
Network feature setting).
2. At Feature code:, enter the feature code or deacti-
vation code received from your dealer (for example,
∗74 or ∗740), press OK.
3. Scroll to the service that the code applies to and
press Select.
4. Scroll to suboption, then Select (Repeat step as
required, based on number of suboptions).
(Use step four only for call forwarding options.)
5. Scroll to Activate or Cancel, then press OK.
56
Network services
Some of the features in this menu are network services
that require a subscription. Contact your service provider
for details and availability.
* These features will not appear in the menu unless they
work feature setting” on page 56 for details.
One-touch dialing
This feature allows you to make phone calls quickly and
easily with the touch of a button.
You must store names and numbers in your phone book
can assign a name from the phone book to a one-touch
dial location using your phone’s keys 2 through 8.
Some service providers may also program a third
key for their use (for example, a Customer Service
phone number).
Assigning one-touch dial locations
1. Press Names, scroll to 1-touch dialing and press
Select.
2. Scroll to next available empty location, (empty) will
appear, then press Assign.
3. Scroll to select desired name and press Select.
4. Repeat as necessary
57
Calling a number using one-touch dialing
Press and hold the key (2 through 8) for about two seconds
to call the number in the corresponding one-touch dial
location. You can also press the key and then
prefer.
if you
Your phone recalls the phone number from the memory,
displays it briefly, then dials it.
Changing numbers in one-touch dial list
With this feature, you can assign a different number to
any one-touch dial location.
1. Press Names, scroll to 1-touch dialing and press
Select.
2. Scroll to the location you wish to change and press
Options.
3. Scroll to Change, then press Select.
4. Scroll through phone book to select new number
and press Select.
Erasing one-touch dial locations
1. Press Names, scroll to 1-touch dialing and press
Select.
2. Scroll to the location you wish to erase and press
Options.
3. Scroll to Erase, press Select, then press OK at Erase?
Paging
If your service provider supports paging, you can receive
pages with your phone. A page is a special type of mobile
Phone book
About the phone book
The phone book lets you quickly make a call by selecting
a name from a list of up to 200 entries. An entry consists
58
of a name and phone number. You can also associate an
email address with an entry, for use when addressing a
mobile message.
Adding an entry to the phone book
Tip: To quickly create an entry, simply enter a phone number
at the start screen, press Save, then go to step 3.
1. Press Names.
2. Scroll to Add new, then press
Select.
3. Enter a name (16 characters
maximum), then press OK.
Note: You can’t associate the same name with two different
entries: for example, Johnand John. Instead, create
entries for John H and John W. If you try to use a
name that already exists, Replace? <name of
existing entry> appears. To replace the existing
entry, press OK. To return to the previous screen,
press Back.
4. Enter a phone number (32 digits maximum), then
press OK.
Note: When you remove the battery, entries are NOT lost;
they are retained in memory.
Associating an email address with an entry
You can associate an email address with an entry in your
phone book. Later, when addressing a mobile message,
you can quickly enter the email address by selecting the
name in your phone book.
1. At the start screen, display the list of phone book en-
tries by pressing
try.
, then scroll to a phone book en-
2. Press Details, then Options (or, if the scrolling view
for your phone book is set to Name+number, just
press Options).
59
3. Scroll to E-mail, then press Select.
4. Enter the email address (48 characters maximum),
then press OK.
The presence of an email symbol (@) in the top right
corner of the screen indicates that an email address is
associated with the highlighted entry.
Accessing the phone book
To quickly display the list of entries in your phone book:
1. Display the start screen (press and hold
2. Press
or . Scroll in either direction.
).
Finding a name in the phone book
There are two ways to find a name in your phone book:
Scroll - At the start screen, press or to view a list
of names in the phone book. Scroll to the desired name.
•
Tip: To quickly scroll to a name, press the appropriate number key.
For example, to quickly scroll to Mom (the letter M), press
. To scroll to Nancy (the letter N), press
twice.
•
Search - Press Names. The menu item Searchappears
highlighted by default. Press Select. Enter the desired
name. Press OK. If you entered only the first letter of
the name and several names begin with the same
letter, scroll until the desired name appears.
Calling a number in the phone book
1. Highlight the name in the list of phone book entries.
2. Press
. Your phone dials the number associated
with the name and displays the dialed number on
the screen.
Phone book options
To display a list of phone book options, press Names.
Scroll to one of the following items, then press Select.
•
Search allows you to search for a name.
60
•
•
Add new allows you to add an entry (name and phone
number) to your phone book.
Options lets you choose the format of your scrolling
view and check the status of your phone book
memory (the number of entries you have created).
•
•
•
1-touch dialing (speed dialing) allows you to assign
a phone number to a one-touch dial location. See
Erase all lets you erase every name and number in
your phone book. See ‘Erasing all entries from the
Own Number displays your own phone number.
Editing a name and number
1. Highlight the name in the list of phone book entries.
2. Press Details, then Options (or, if the scrolling view
for your phone book is set to Name+number, just
press Options).
3. Edit appears highlighted by default. Press Select.
4. Edit the name, then press OK.
5. Edit the number, then press OK.
Editing an email address
1. Highlight the name in the list of phone book entries.
2. Press Details, then Options (or, if the scrolling view
for your phone book is set to Name+number, just
press Options).
3. Scroll to E-mail, then press Select.
4. Edit the email address, then press OK.
Erasing one entry from the phone book
Note: This procedure cannot be undone.
1. Highlight the name in the list of phone book entries.
61
2. Press Details, then Options (or, if the scrolling view
for your phone book is set to Name+number, just
press Options).
3. Scroll to Erase, then press Select.
4. A confirmation message appears: Erase?.
5. Press OK.
Erasing all entries from the phone book
Note: Performing this procedure erases your entire phone
book! This procedure cannot be undone.
1. Press Names.
2. Scroll to Erase all, then press Select. A confirmation
message appears: Are you sure?.
3. Press OK.
4. Enter your security code, then press OK.
Phone lock
This feature protects your phone from unauthorized
outgoing calls or unauthorized access to information
stored in the phone.
With phone lock activated, Phone locked will be displayed
each time you turn your phone on or off. You will be
prompted for your lock code when you press either Names
or Menu (Call not allowed will be displayed if you attempt
to place a call while phone is locked). Once your lock code
has been accepted, your phone will function normally.
Activating and deactivating phone lock
Press Menu 4-3-2-1 (Settings - Security settings -
Access codes - Phone lock). Enter the lock code then
press OK. Then scroll to On or Off, and press OK.
Complete the phone lock activation or deactivation by
turning your phone off and back on.
When your phone is locked, calls may be possible to an
official emergency number (for example, 911) programmed
into your phone including calls with Emergency key 9
62
You can also store a number in the Unlocked phone
number location, which allows you to call this number
Answering a call with phone lock on
Press any key except
and
.
Note: This assumes that Anykey answer (Menu 4-1-4) is
set to On.
Phone settings
Phone settings allows you access to other phone features
such as an alarm clock and your phone’s language.
Using phone settings
Press Menu 4-2 (Settings - Phone settings), then scroll
to one of the following options, then press Select:
Profiles
You can adjust and customize your
phone to whatever environment
you find yourself in (for example,
shopping mall, movie theater, etc.).
Each profile uses its predefined
settings to determine your phone’s ringing volume,
ringing tone, message alert tone, keypad tones, warning
tones, etc., for a number of different environments.
These settings can be changed at any time, and each
profile can be selected in a matter of seconds.
changes made in profiles back to the factory defaults.
The default setting is Normal.
63
Selecting a profile
Quickly press the
key to view a list of the available
profiles. Scroll to the profile and press OK.
When you select a profile other than Normal, it will
appear on the start screen.
This only allows you to select a profile; you cannot
customize them here. Keep reading to learn how to
customize a profile.
Customizing profiles and other options
Press Menu 3 (Profiles) and scroll to desired profile, then
press Options.
Once Optionsis selected, Select, Customizeand Rename
may appear as your choices. Once you have selected and
highlighted one of these items, press OK. If you wish to
go back to the main menu, press Back.
Select activates the profile.
Customize allows you to customize a profile by changing
its settings. When you reach one of the following set-
tings within a profile, press Select. Once you make your
choice within that setting, press OK.
• Ringing options
• Ringing volume
• Ringing tone
• Vibrating alert
• Keypad tones
• Warning and game tones
• Message alert tone
• Lights (appears only in Handsfree)
• Automatic answer (appears only in Handsfreeand
Headset)
Rename allows you to rename certain profiles.
Note: Handsfreeand Headset will not appear in the profiles
list unless your phone has been connected to a
handsfree device or a headset. However, they will
remain in the menu once connected for the first time.
64
Note: When you change a setting in any profile, it only
affects that profile and will not change your phone’s
normal settings.
Renaming profiles
1. Press Menu 3 (Profiles).
2. Scroll to desired profile, then press Options.
3. Scroll to Rename and press OK.
4. Enter new name and press OK again.
Note: Normal, Handsfree, and Headset profiles cannot
be renamed.
Received calls
If Caller ID is available, this feature shows you the phone
numbers of the 10 most recent calls you’ve answered.
Press Menu 2-2 (Call log - Received calls), then scroll
the list of numbers.
call lists.
Received calls options
Restore factory settings
You can reset the settings of many of your phone’s
features to factory defaults (as in a new phone).
Restoring factory settings
Press Menu 4-2-4 (Settings - Phone settings - Restore
factory settings), enter your phone’s security code and
press OK.
Note: Your phonebook, timers, language selection, security
code and lock codes are not reset. However, any
profiles you have modified will reset when you
restore your settings. Plus, if you are using your
phone’s clock [versus using the network provided
clock] it will reset as well.
65
Renaming profiles
Restricting calls
This feature allows you to restrict incoming and outgoing
calls based on a list of phone numbers that you create.
Note: When calls are restricted, calls may be possible to
the emergency number programmed into your phone
(forexample, 911 or other officialemergencynumbers).
However, Emergency key 9 may not operate depending
on the type of restriction you choose.
Adding a call restriction
You can add up to 10 restrictions for outgoing calls, and
15 for incoming calls. The maximum number of characters
you can enter for each restriction is 15.
1. Press Menu 4-3-1 (Settings - Security settings -
Restrict calls).
2. Scroll to Restrict outgoing calls or Restrict
incoming calls and press Select.
3. Enter the security code and press OK.
Note: The message “Caller ID must be available” will
display prior to creating an incoming call
restriction.
4. Scroll to Add restriction to create an outgoing or
incoming call restriction and press OK.
5. Enter the number string you wish to restrict and
press OK, for example:
If you wish to restrict all calls that begin with 1,
enter 1.
If you wish to restrict all calls that begin with 1972,
enter 1972.
If you wish to restrict all calls that begin with 214,
enter 214.
66
6. If you wish to enter a name for the call restriction,
enter the name using your phone’s keypad, then
press OK. If a name is not entered, the number that
is restricted will appear in place of the name.
Note: When creating a new restriction, that restriction is
automatically selected (enabled) at the time it is
saved.
Selecting a call restriction
1. Press Menu 4-3-1 (Settings - Security settings -
Restrict calls).
2. Scroll to Restrict outgoing calls or Restrict
incoming calls and press Select.
3. Enter the security code and press OK.
4. Scroll to Select and press OK.
5. Scroll to each restriction you wish to use and press
Mark; press Unmark to deactivate existing restrictions.
6. Press Back and then press Yes at Save changes?.
Editing a call restriction
1. Press Menu 4-3-1 (Settings - Security settings -
Restrict calls).
2. Scroll to Restrict outgoing calls or Restrict
incoming calls and press Select.
3. Enter the security code and press OK.
4. Scroll to Edit and press OK.
5. Scroll to the restriction you wish to edit, press OK.
Note: If no name has been entered for a restriction,
the restricted number will be displayed.
6. Edit the restriction, then press OK.
7. Edit name if desired using same procedure as above.
Erasing a call restriction
1. Press Menu 4-3-1 (Settings - Security settings -
Restrict calls).
67
2. Scroll to Restrict outgoing calls or Restrict incoming
calls and press Select.
3. Enter the security code and press OK.
4. Scroll to Erase and press OK.
5. Scroll to the restriction you wish to erase, press OK.
6. Press OK again to erase restriction.
Note: The All calls option cannot be erased and therefore
does not appear in the list of restrictions to be deleted.
Ringing options
This is one of the settings in your phone’s profiles
your phone rings, beeps, or remains silent when someone
calls you. This feature does not affect incoming mobile
(text) message alert tones or incoming data/fax calls
Selecting ringing options
1. Press Menu 3 (Profiles).
2. Your phone lists each profile. Scroll to the profile
you want and press Options.
3. Highlight Customize and press OK. Scroll to Ringing
options, then press Select.
4. Highlight either Ring, Ascending, Ring once, Beep
once or Silent and press OK.
Note: The Ascending ringing option plays the selected
ringing tone at a low volume, then gradually
increases in intensity with each ring.
Ringing tone
This is one of the settings in your phone’s profiles
ringing tones your phone uses for incoming voice calls.
Beep once, ringing tones are automatically disabled;
however, incoming calls can still be received.
68
Selecting ringing tones
1. Press Menu 3 (Profiles).
2. Your phone lists each profile. Scroll to the profile you
want and press Options.
3. Highlight Customize and press OK. Scroll to Ringing
tone, then press Select.
4. Scroll through the options. After you hear the tone
you wish to use, press OK.
Ringing volume
This feature, which is found within your phone’s profile
settings, allows you to adjust your phone’s ringing volume.
Saved
This is where saved mobile (text) messages are stored.
Scrolling view
You have three different options on how you can view the
phone book. Your choices are:
Name list shows all stored names in a scrolling list. Three
names will appear at any given time. To view other names
in the directory, scroll the list. Name list is the default
setting.
Name+number displays individual names and numbers
stored in your directory. Only one name will display on
your screen at a time, with the corresponding phone
number. Scroll to view other names.
Name only shows individual names only on a full screen
display. Scroll to view other names. To view the corre-
sponding phone number, press Details, then scroll the list.
Selecting your scrolling view
1. Press Names.
69
2. Scroll to Options, then press Select.
3. Press Select at Scrolling view.
4. Scroll to Name list, Name+number, or Name only,
then press OK.
Security settings
This menu includes the following security features:
Security code
Your phone’s default security code is 12345. It’s highly
recommended that you change this code at once, write it
down, and store it in a safe place away from your phone.
Note: If you have changed your security code and don’t
remember the new code, contact your service
provider. Once you have changed your security
code, the default setting is no longer valid.
Your phone will prompt you for a five digit security code
for certain features. These features can be used only after
the correct security code has been successfully entered.
Note: When entering your security code, ***** will appear
on the display to keep others from viewing your code.
If you make a mistake entering the code, erase the last
entered digit by pressing Clear (or press and hold Clear
to delete all the digits on your display). Then enter the
correct code or press Back to exit the current feature.
If you enter an incorrect security code (Code error will
appear) five times in a row, your phone won’t accept any
entries for the next five minutes.
70
Changing your security code
1. Press Menu 4-3-2-4 (Settings - Security settings -
Access codes - Change security code).
2. Enter security code and press OK.
3. Enter new security code at Enter new security
code:, press OK (must be five digits).
4. Enter new security code again at Verify new
security code:, press OK.
5. Phone will display Security code changed.
Send own caller ID with next call
In most service areas, when you call someone, their caller
ID system allows them to see your name and phone
number. Your phone is set to automatically allow this
information to be seen. Before you make a call, you can
choose to prevent this information from being seen.
This is sometimes referred to as “blocking caller ID”.
Warning: While roaming, you may not be able to block
caller ID.
Note: Before you can activate this feature, you should
first store the feature code given to you by your
service provider. Otherwise, this feature may not
appear in the menu or function properly. Check with
your service provider to confirm if the feature code
has been pre-programmed for you. See “Network
feature setting” on page 56 for more details.
This feature works on a per-call basis, so you must
perform this procedure before each call that you make in
order to block caller ID for that call.
1. Press Menu 4-4-4 (Settings - Network services -
Send own caller ID with next call).
2. Highlight Yes (to show your number) or No (to not
show it) and press OK.
3. Enter the number you wish to call (or press Search
to retrieve the number from the phone book), then
press OK. Press OK again.
71
4. Your phone will attempt to call this number with the
feature code you stored in Menu 4-4-5 (see “Network
Settings
This main menu allows you access to other features.
See these individual entries for more information.
Storing a name and number
You can save names and numbers in the Phone book.
Either use the method described in “Adding an entry to
the phone book” on page 59 or the “quick save” method
described below.
Quick save
Enter the phone number and press Save. Enter a name at
Name: if you wish (optional), then press OK.
Note: To save the number without entering a name, press
and hold Save for 2 seconds. The number will appear
at the end of your phone book list.
Synchronization
Your phone supports synchronization of its phone book
with many popular Personal Information Manager (PIM)
programs (for example, Lotus Organizer, Microsoft Outlook,
Symantec ACT!) by using 3rd party software.
Synchronization of contacts and phone numbers between
your phone and PC will also require the optional DAU-9P
serial cable. Check with your local Nokia dealer for the
availability of these products.
72
System selection
About selecting a system
The System menu (Menu 5) allows you to customize the
way your phone chooses a system in which to operate
while you are “roaming” (using your phone outside of
your primary or “home” system). Your choice of a system
affects the type and amount of charges you incur. By
default, your phone is set to automatically search for the
most cost-effective system while roaming. If your phone
can’t find a preferred system, it uses a system based on
the option you choose in the System menu.
Note: Before selecting an item in the System menu, contact
your service provider to find out how your selection
will affect your service charges.
Roaming
Roaming is the condition of using your phone outside of
its home area. While roaming, another service provider’s
system handles your call, so the service rate for the call is
usually greater than the rate for calls made within your
home area. While roaming, the word Roaming and the
roaming indicator ( ) appear on the start screen.
Note: In some systems, you may need to have a roaming
agreement in order to place a call. If no roaming
agreement has been arranged, a network operator
may interrupt and request information on how you
intend to pay for the call.
Service Types
In each wireless service area there are usually two service
providers referred to as type A and type B. When you first
set up your wireless service account, your service provider
will inform you of which system you will be using (usually
type B). This is your home system. The other system (for
example, type A) is known as a non home-type system.
73
System choices
Note: If you have more than one phone number (NAM),
your choice affects only the currently selected
Note: System choices may differ according to service
provider.
•
Home only - Your phone cannot roam. This means you
can make and receive calls in your home area only.
While roaming, No Service appears and you will not
be able to make or receive calls.
•
•
Automatic A - Your phone searches for system A. If
system A is not available, it searches for an available
analog system.
Automatic B - For most service providers, this is the
default selection. Your phone searches for system B. If
system B is not available, it searches for an available
analog system.
•
Analog - Your phone searches for an available analog
system. If an analog system is not available, No Service
appears. While Analog is selected, if you power your
phone off and back on, your phone will automatically
be reset to Automatic B.
Text messaging
Touch tone length
This feature determines the length of each touch tone
when they are sent automatically.
Short sets the tone length to .1 second. Long sets the
tone length to .5 second.
You can set the touch tone length by pressing Menu
4-2-3-2 (Settings - Phone settings - Touch tones -
Touch tone length).
74
Touch tones
Your phone can generate various sounds, called touch
tones, when the keys are pressed. These are also known
as DTMF tones.
Touch tones can be used for many automated, over-the-
phone services such as checking bank balances, airline
arrivalanddeparture times,andusing voice mailboxoptions.
Touch tones can be sent only during an active voice call.
Storing touch tone strings
Store touch tone strings the same way you store phone
You can store a whole digit sequence in your phone book
and send it as touch tones for frequently-used strings of
numbers.
Sending a touch tone string
Make sure Menu 4-2-3-1 (Settings - Phone settings -
Touch tones - Manual touch tones) is not set to Off.
During a call,
1. Press Options.
2. Scroll to Touch tones and press OK.
3. Enter touch tone string or recall string from the
phone book and press OK.
Note: Use caution when sending confidential information
over the air when using DTMF tones in analog mode.
Storing touch tone strings with phone numbers
1. Enter the phone number (for example, your office
voice mailbox).
2. Press ∗∗∗ (p) or ∗∗∗∗ (w).
3. Enter the touch tone string (for example, voice mail-
box password).
4. Store the number as you normally would.
numbers)” on page 40 for details on “p” and “w”
characters.
75
When you dial this number, your phone first dials the
phone number, then waits (because of the “w” character)
for you to press Send. Your phone then sends your
password.
If you include a “p” character instead of a “w”, your phone
pauses for 2.5 seconds, then automatically sends your
password as touch tones.
Unlocked phone number
When the phone lock is on, no calls can be made. But if you
store a number in the unlocked phone number location,
you can make a call to that number while the phone is locked.
lock.
Storing the unlocked phone number
1. Press Menu 4-3-2-2 (Settings - Security settings -
Access codes - Unlocked phone number).
2. Enter lock code and press OK.
3. Enter phone number at Number: (or press Search
and scroll through the phone book).
4. Press OK.
Note: Saving a new unlocked phone number will overwrite
the old one.
Calling the unlocked phone number
Note: Your phone must be locked via the phone lock to use
this feature.
•
At the start screen, press
press
OR, manually enter the phone number as it is
stored and press
or
once, then
.
•
.
76
Vibrating alert
This is one of the settings in your phone’s profiles (see
page 63). Your phone has an internal vibrating feature, so
you can set your phone to vibrate when you receive a
voice call.
Activating vibrating alert
1. Press Menu 3 (Profiles).
2. Your phone lists each profile. Scroll to the profile
you want and press Options.
3. Highlight Customize and press OK. Scroll to Vibrating
alert, then press Select.
4. Scroll to On or Off and press OK. If you choose On,
your phone will vibrate even if you have set Ringing
Note: The vibrating alert does not work when your phone
is connected to any charger or handsfree device.
Also, if you have chosen the Ring once option for the
profile you’re using, the vibrating alert will only
vibrate once when your phone rings.
Voice mailbox number
This number dials your voice mailbox.
Voice messages
Voice mail is a network service that may require a
subscription from your service provider.
Once everything is set up for your voice mailbox (see next
page), your phone will notify you when you receive a voice
message.
New voice message will appear on the display along with
the
icon, and you’ll hear a short beep. Your phone
will display the number of voice messages if you’ve
received more than one.
77
Setting up your voice mailbox
Before you can retrieve any voice messages, you need to
store your voice mailbox number. Your service provider
usually gives this number to you.
When you’re ready to store your voice mailbox number,
press Menu 0-1-2-2 (Messages - Voice messages -
Voice mailbox number). Then enter your voice mailbox
phone number and press OK. This number can be up to 32
digits long and is used until it’s changed. So if your phone
number changes, you may need to change your voice
mailbox number along with it.
Note: Some service providers automatically pre-program
this number into your phone. You will only be able
to view (and not change) this number.
Greetings, passwords, and prompts
These may vary in different wireless systems. So if you
need information about how to record your greeting or
how to store your password, contact your service provider.
You’ll also need to contact them on how to listen to voice
messages once you’re connected to your voice mailbox.
Listening to your voice messages
If New voice message is displayed, just press Listen and
follow the prompts. If you’d rather listen to your messages
later, press Exit.
You can listen to messages anytime if you press and hold
the 1 key (or press 1, then
). Calling voice mailbox
will appear on the display. Or if you prefer, you can access
your voice mailbox by pressing Menu 0-1-2-1 (Messages -
Voice messages - Listen to voice messages).
Voice message notification
A caller who leaves you a voice message can specify a
message priority level if the network supports this
feature:
•
New voice message - This is a normal priority
message; it can be sent by anyone.
78
•
•
Urgent voice mail - The person who sends this kind
of message is requesting an immediate reply. This kind
of message can be sent by anyone.
Emergency voice mail - This kind of message can be
sent only by a network operator or person in authority
when life of property is threatened.
New voice message notifications overwrite older ones,
regardless of priority level. For example, if Emergency
voice mail is displayed and you receive a new voice
message of normal priority, the emergency message
notification will disappear and the New voice message
notification will be displayed.
Clearing the voice message icon
In most networks, the voice message icon will automatically
be cleared a few seconds after listening to your last new
message. If the network in which you are currently using
your phone does not automatically clear the voice message
icon, you can manually clear the icon. To clear the icon,
press Menu 0-1-2-3 (Messages - Voice messages -
Clear voice message icon), then press Clear.
Voice privacy
Note: Availability of this feature depends on your
arrangement with your service provider and the
network’s ability to support the feature.
Some service provider’s networks can encrypt the signal
transmitted during a phone call to ensure others are
unable to listen to your conversation. By default, the
voice privacy setting on your phone is set to Off. To turn
it on, press Menu 4-4-1 (Settings - Network services -
Voice privacy). Scroll to On, then press OK.
During a call, if voice privacy is lost, your phone sounds
two short beeps.
Volume
You can adjust the ringing volume and earpiece volume
with your phone.
79
Earpiece volume
While in a phone call, you can adjust the listening volume
for your phone’s earpiece. The top scroll key increases
while the bottom one decreases the volume.
If an accessory like a headset or a handsfree device, or
one with its own loudspeaker, is connected to your phone,
the scroll keys will adjust the volume for that accessory.
Note: Using the scroll keys to adjust earpiece volume
functions only during phone calls.
Ringing volume
This is one of the settings in your
sets the default ringing volume for
incoming voice calls and message
alert tones.
Setting the ringing volume
1. Press Menu 3 (Profiles).
2. Your phone lists each profile. Scroll to the profile
you want and press Options.
3. Highlight Customize and press OK. Scroll to Ringing
volume, then press Select.
4. Scroll through the options. When you hear the
volume level you wish to use, press OK.
Warning and game tones
This is one of the settings in your phone’s profiles
sounds your phone makes for conditions such as errors,
confirmations, power on, battery low, and recharge
battery, or sounds made during game play.
Turning warning tones on and off
1. Press Menu 3 (Profiles).
2. Your phone lists each profile. Scroll to the profile
you want and press Options.
80
3. Highlight Customize and press OK. Scroll to
Warning and game tones, then press Select.
4. Scroll to On or Off and press OK.
Welcome note
You can program a welcome note into your phone to
display a message when you first turn it on (for example,
hello, your name, a reminder, etc.). The maximum length
is 36 characters.
1. Press Menu 0-1-3 (Messages - Welcome note).
2. Enter new message or edit an existing one.
3. Press Options.
4. Scroll to Save or Erase and press OK.
The welcome note appears each time your phone is switched
on. Characters you enter are added to the left of the cursor.
To delete characters to the left of the cursor, press Clear.
To move the cursor, press
or
.
details.
81
6. Receiving mobile messages
Note: You can receive mobile messages if you have
subscribed to the mobile messaging service offered by
your service provider and the network in which you are
using your phone supports mobile messaging.
About mobile messages
You can receive a message in the form of text that
appears on your phone’s screen. Messages are managed
by your service provider’s message center. The person who
sends you a message usually sends it via another phone
(one which allows the user to send and receive mobile
messages) or through email on the internet.
A message consists of a header and a body. The header
may contain the sender’s address and the date that the
message was sent. The body contains the main part of the
message. If you receive a message that was sent via
email, the message subject (title) may appear at the
beginning of the message.
Messages are stored in folders:
•
•
•
Inbox - Messages (whether read or unread) that
you have neither erased nor saved.
Outbox - Messages that you sent (if supported by
your service provider).
Saved - Messages that you have saved.
The sender may assign a priority level to their message:
•
Urgent
•
Emergency - Sent only by a network operator.
Your phone can store as many as 60 messages (memory
is shared by all folders). However, memory is shared by
both folders. The total number of stored messages depends
on message length.
If your phone’s memory is full when you receive a mobile
(text) message, one or more existing messages will
automatically be deleted to make room for the new
82
message. The priority level assigned to the received
message determines which message is deleted:
•
Normal (non-emergency) messages - When a
normal message is received, the oldest read
message in the Inbox is deleted.
•
Emergency messages - When an emergency
message is received, existing messages are deleted
in the following order:
- oldest read message in the Inbox
- oldest message in the Saved folder
- oldest unread message in the Inbox
If No space: message waiting or a similar notification
message appears, delete one or more old messages to
make room for the new message. The network will resend
the message later.
When you receive a mobile message
When you receive a mobile message, the mobile message
icon
appears and Message received (or New
emergency message) is displayed. Depending on the
message alert tone setting, a tone may sound. See
To read the message, press Read. The Inbox appears with
the new message selected. Press Read again. If necessary,
scroll down to read the entire message. At the end of the
message, scroll further to view the sender’s name or phone
number and the date and time the message was received.
When you’ve seen the last new message, the
icon
disappears. While reading a message, you have several
Options:
•
Erase deletes the message. Press OK to confirm
the deletion or Back to cancel.
•
Use number calls a phone number if it was
included in the message. If more than one number
was included, a list of numbers is displayed.
Choose one and press Call.
•
Save sends the message to the Saved folder.
83
•
•
Save address allows you to save the sender's email
address into your phone book.
Use web link allows you to direct the Minibrowser
to a web address (URL) that appears in the body of
the message. (Availability of the Minibrowser
depends on your arrangement with your service
provider.)
Erasing mobile messages
To erase the message you’re reading, press Options, Erase.
To erase multiple messages, press Menu 0-1-1-5. Press
Select. Choose the type of message to erase.
84
7. Sending mobile messages
Note: You can send mobile (text) messages if you have
subscribed to the mobile messaging service offered by
your service provider and the network in which you are
using your phone supports mobile messaging.
About mobile messages
You can use your phone to send mobile messages that
can be addressed to email addresses and phone numbers.
The recipient typically receives your message via:
•
•
•
a phone that supports mobile messaging
a pager
the internet (through an email client)
Message folders
Message are stored in folders:
•
•
•
Inbox - Messages that you have received (whether
read or unread) and that you have neither deleted
nor saved.
Outbox - Messages that you have sent (or that
you have created then saved, intending to send
later).
Saved - Messages that were in the Inbox or
Outbox and which you saved.
Predictive text input
When composing a message, you can use the predictive
text input method to quickly enter text. See ‘Predictive
Templates
A template is a predefined, commonly used sentence that
you can quickly insert into a message. See ‘Templates’ on
85
Message priority levels
You can assign an urgent priority level to a mobile
message. An icon or message should then appear on the
recipient’s phone (or other device) to indicate the high
priority level of your message.
Delivery notification
When you send a message, you can request to be notified
when the recipient receives the message. This notification
is called a delivery note. If you addressed the message to
more than one recipient, a separate delivery note appears
for each recipient.
Creating a mobile message
There are different ways to create a mobile message:
•
•
•
•
Write a new, blank message
Reply to a received message
Resend a message from the Outbox
Forward a message
Writing a new, blank message
1. Press Menu 0-1-1-1 (Messages - Text messages -
Write new). Select the type of message to send.
3. Press Options, then select Edit message. Edit (write)
your message. The terms writing and editing both
refer to the process of entering text into a mobile
4. To send the message, press Options, then select Send.
Tip: If message delivery fails, you can resend the message.
Replying to a message
1. Read the message to which you want to reply.
•
If you just received the message and a notification
appears on the screen, go to the next step.
86
•
If the message is in the Saved folder, press Menu
0-1-1-4 (Messages - Text messages - Saved).
Scroll to the message.
2. Press Read.
3. Press Options, Reply (or Reply w/ copy if you want
your reply to include a copy of the original message
followed by the text of your reply).
4. Select the type of message for your reply.
Resending a message
1. In the Outbox, read the message that you want to
resend.
2. Press Options, then Resend. Settings such as Urgency
and Delivery note that you chose for the original
message are retained.
Forwarding a message
Messages in the Inbox or Saved folder can be forwarded.
1. Read the message that you want to forward.
2. Press Options, scroll to Forward, then press Select.
Addressing a mobile message
If the Recipient(s) field is empty, press Back to exit the
message. If one or more characters is present:
•
•
Press and release Clear to delete one character
Press and hold Clear to delete all characters
To address a mobile message, enter as many as 5 email
addresses in the Recipient(s) field. The maximum number
of characters allowed in each email address is 48. A counter
in the top right corner of the screen indicates the remaining
number of characters allowed in the entire Recipient(s)
field.
If the recipient’s name is listed in the phone book and an
email address is associated with their name, you can
quickly enter their email address by searching for their
name in the phone book. (See “Associating an email
address with an entry” on page 59.) To enter an email
address from the phone book, press Options, then Search.
87
When entering an address manually, you can quickly
enter the @ symbol by pressing
repeatedly until it
appears.
When addressing multiple recipients, separate each address
with a comma. If you use the Search feature, a comma is
automatically entered after each address. To manually
enter a comma, press
appears, OR press
repeatedly until the comma
, then select a comma from the list
of special symbols.
Editing a mobile message
Caution: While editing a message, if you accidentally
press and hold Clear, all text within your message will be
deleted.
A message can contain 88 characters. A counter in the
top right corner of the screen indicates the number of
remaining characters that you can enter. You can use
two different methods to enter text into the message:
•
•
Traditional text input
Predictive text input
Traditional text input
information.
Predictive text input
Note: The predictive text feature is based on a built-in
dictionary. Your phone includes several different
language versions of this dictionary. Although your
phone may be able to display a given language on
the screen, it does not necessarily contain a
predictive text dictionary of that same language.
Using the traditional text input method requires that you
press some keys more than once. For example, to enter
the letter “c”, you must press 2 2 2. When using predictive
text input, your phone “guesses” which word you are
typing, requiring that you press a key only once for each
letter you enter.
88
Activating predictive text input
Before you can use the predictive text input method,
you must activate the feature. While editing a message,
press Options, Dictionary, then choose any language.
The predictive text input method is now available for use
when editing.
Changing the language of the dictionary
While editing a message, press Options, Dictionary, then
choose a language.
Writing words
When you begin editing a message, the predictive text
icon (
) appears at the top of the display, indicating
that the phone is in predictive text input mode (the default
mode). If the icon does not appear, predictive text input
has been deactivated. To turn it on, press Options,
Dictionary, then choose the desired input language.
To write a word, press each key only once for each letter
of the word. For example, to write hello, press:
The characters that you enter appear underlined. The word
changes after each keystroke, so try not to pay attention
to how the word appears on the display until you have
pressed all of the keys.
When you finish writing the word, check to ensure that
the word is correct. If the word is correct, enter a space
(press
) and write the next word. If the word is
incorrect and is underlined:
•
•
Press
repeatedly until the desired word appears.
OR, press Options, Matches. Your phone displays a list
of words. Choose a word from the list, then press Use
or press Back to exit and return to the message editor.
If the ? character appears after the word, there are no
more words in the dictionary that correspond to your key
presses. At this point, you can add the word to the
dictionary by pressing Spell.
89
Writing compound words
To quickly write a compound word (for example, bluejay):
1. Write the first part (blue).
2. Press
(do not enter a space). The underline
disappears from the first part.
3. Write the second part (jay).
Deleting characters
To delete one character to the left of the cursor, press Clear.
To delete all characters in the message, press and hold
Clear.
Changing the method of text input and the case
of letters
Press
(traditional
that you enter (sentence case Ab c , upper case
repeatedly to change the method of text input
or predictive ) and the case of letters
, or
). he phone cycles through the following
lower case
modes:
•
•
•
•
Predictive text input, sentence case:
Predictive text input, lower case:
Traditional text input, upper case:
Traditional text input, lower case:
Tip: If you don’t want to use predictive text input mode
at all, you may want to deactivate it. (You can reactivate
page 91. This will keep you from having to cycle through
all four modes.
Entering numbers
To enter one or just a few numbers, press and hold the
respective number key. To enter many numbers, change to
number entry mode (
) and enter the numbers as
usual. To change to number entry mode, press and hold
, OR, press Options, Insert number.
90
Inserting special characters
To insert a special character (such as a punctuation mark),
press and hold
To quickly insert a period (.), press
, OR press Options, Insert symbol.
. To quickly insert
double dashes (--) or three ellipses (...), press
a few
times.
Adding a word to your personal dictionary
If your phone’s dictionary does not contain a word, you
can add it to your personal dictionary. If the ? character
appears after the word, press Spell. (OR, at any time while
editing, press Options, Insert word.) Enter the word using
traditional text input, and press OK. If your personal
dictionary is full, the new word replaces the oldest added
word.
Deactivating predictive text input mode
To deactivate the predictive text feature, while editing a
message, press Options, Dictionary, Dictionary off.
Templates
Note: Templates are available only in English.
While you’re editing a message, press Options, then
select Add template. Select a template:
1. Call me at [ ]. (phone number/time/place)
2. I’ll call you at [ ]. (time/place)
3. Meet me at [ ]. (time/place)
4. I’ll be there at [ ]. (time)
5. I’ll be [ ] minutes late. (number of minutes)
6. I’m running late.
7. I’m on my way.
8. Meeting cancelled.
9. Meeting changed to [ ]. (time/place)
10. Appointment cancelled.
11. I love you!
12. Thank you!
13. I’m sorry.
14. Call at your convenience.
15. Please call ASAP.
91
Brackets ([ ]) in a template represent a value that you can
specify. (The value is not retained for future use; you enter
the value each time you use the template.) If you select a
template that contains brackets, you’ll be prompted to
enter a value. You can edit the template text after you
insert it into your message.
Sending a mobile message
When you’re done editing your message, to send it:
•
•
Press
.
OR, press Options, then Send.
If the network can’t send your message, a warning note
should appear.
Erasing mobile messages
To erase the message you’re reading, press Options, Erase.
To erase multiple messages, press Menu 0-1-1-5. Choose
the type of message to erase.
92
8. Data and Fax Calls
Note: This feature is available only if your service provider’s
network supports data and fax calls. Data and fax
calls may also require that you subscribe to these
additional services. Please check with your service
provider before sending or receiving data or fax calls.
Your phone can function as a fax/modem when connected
to your PC or laptop computer via the optional DLR-3
Data Cable (available through your local Nokia dealer).
You must also have the appropriate fax or data software
installed and configured to send and receive data or faxes
through your phone.
Can I receive a data or fax call while a voice call
is in progress?
Yes. Your phone will display either Data call or Fax call,
depending on the type of incoming call. If no cable is
connected, the phone will display Fax call, connect data
cable or Data call, connect data cable. If you have Caller
ID, the caller’s name or number will also be displayed.
You must first terminate the voice call, then launch the
appropriate data or fax software and allow the software
to accept the incoming call.
Can I receive other calls while a data or fax call
is in progress?
No. The caller will receive a busy signal.
Can I place a voice call while a data or fax call is
in progress?
No. If a voice call is attempted while a data or fax call is
in progress, the phone will display End data call? End the
data or fax call from your computer’s software, or press
Back to return to the data or fax call in progress. Even if
a data or fax call is not in progress (data is not being
transferred), you cannot place a voice call if the data
cable is connected to the phone.
93
Getting started
Make sure your phone is connected to your computer via
the optional DLR-3 Data Cable and your computer
recognizes the new hardware.
See the installation and configuration instructions
supplied with the DLR-3 cable for more information.
Configuring your data or fax software
Once properly connected and configured, your PC will
recognize your phone as an external fax/modem. However,
your fax or data software may already be configured to use
the existing PCMCIA or internal modem.
Before you can use your phone to send and receive data
or faxes, you must reconfigure your fax or data software
so that it uses your phone rather than your existing
modem. You may consider creating a separate set of
dialing properties to use when your phone is connected,
rather than changing any existing settings.
Please refer to the documentation or online help files for
your data or fax application when creating new dialing
configurations, or modifying existing settings.
To start a data or fax call
Note: The restrict calls feature may affect any data/fax
calls you attempt. If you experience problems,
1. Initiate a data or fax call using your data or fax
software configured for your phone.
2. When trying to connect to the network, the phone
displays Connecting... Once connected, the text
Data call (or Fax call) remains on the display for the
duration of the data or fax call.
3. Terminate the data call from your data software; fax
calls typically terminate automatically.
Note: Avoid terminating a call by pressing your phone’s
key. This may cause your data or fax application
to temporarily lock up and could cause loss of data.
94
Note: Data or fax calls cannot be initiated using your
phone’s keypad. All data and fax calls must be
initiated using the data or fax software.
Note: Any touch tones (DTMF tones) needed for calling
cards, special long-distance access numbers, etc.
must be programmed into the dialing string.
To receive a data or fax call
Your phone must be connected to your PC via the data
cable.
1. The appropriate data or fax software must be run-
ning. Consider setting your data or fax software to
automatically answer incoming calls so you can
receive them while away from your PC.
2. Receive you receive a call, Data call or Fax call
appears and an alert sounds.
3. Terminate the data call from your data software; fax
calls typically terminate automatically.
Note: Avoid terminating a call by pressing your phone’s
key. This may cause your data or fax application
to temporarily lock up and could cause loss of data.
Manual selection of incoming data/fax calls
Certain service providers require that you preset your
phone to receive the incoming data or fax call, rather
than having the phone automatically detect the call type.
Note: Check with your service provider to see if “pre-
arrangement” of data and/or fax calls is necessary.
Most popular data and fax programs allow you to send
additional initialization commands to the modem when
the program is launched, or when the modem is instructed
to receive a call. You will need to modify your phone’s
modem configuration in the data or fax software so that
it sends the following special initialization string to the
modem:
95
To preset your phone to receive a data call:
AT+CSP=1
To preset your phone to receive a fax call:
AT+CSP=2
You should only have to make this modification once;
these settings typically are saved as a part of your data or
fax program’s settings. Please refer to the documentation
or online help files for your data or fax application when
modifying your modem’s initialization string.
When the software has sent the proper command to your
phone, the phone will display Ready for data reception
or Ready for fax reception momentarily, along with
either a d or f status indicator at the start screen.
Once your phone is preset for either data or fax reception,
you cannot receive incoming voice calls. You must either
remove the data cable or turn the phone’s power off and
back on to restore normal voice call reception.
96
9. Accessories
If you want to enhance your phone’s functionality, an
extensive range of accessories is available for you. You
can select any of these items to help accommodate your
specific communication needs. For availability of these
and other accessories, contact your service provider.
A few practical rules for accessory operation:
Keep all accessories out of reach of small children.
When you disconnect the power cord of any accessory,
grasp and pull the plug, not the cord.
Check regularly that any vehicle-installed accessories
are mounted and are operating properly.
Installation of any complex car accessories must be
made by qualified personnel only.
Note: Use only batteries, chargers and accessories
approved by the phone manufacturer for use with
this particular phone model. The use of any other
types may invalidate any approval or warranty
applying to the phone, and may be dangerous.
Note: For availability of approved accessories, please
check with your authorized Nokia dealer.
Batteries
Several batteries are available for use in your phone:
•
•
•
BLS-2N Extended Battery Li-Ion 900 mAh
BLS-4 Ultra Extended Battery Li-Ion 1500 mAh
BMS-2S Extended Battery NiMH 900 mAh
97
The battery model number is on the battery label which
is visible when the battery is removed from the phone.
Charging Time (Hours)
Battery
Charging Configuration
BLS-2N BLS-4 BMS-2S
Charger connected to phone
ACP-7U charger
4.0
2.0
2.0
5.0-6.0
3.5
4.0
1.5
1.5
ACP-9U charger
LCH-9 charger
3.5
Using charger and DCH-8
ACP-7U charger
4.0
2.0
5.0-6.0
3.5
4.0
1.5
ACP-9U charger
Using charger and DCH-9
ACP-7U charger
Front slot full, rear slot empty
Rear slot full, front slot empty
Both slots full*
4.0
6.5
8.5
5.5
12.0
15.75
4.0
6.5
8.5
ACP-9U charger
Front slot full, rear slot empty
Rear slot full, front slot empty
Both slots full*
2.0
4.0
3.5
8.0
1.5
4.0
5.25
10.5
5.25
* The battery in the rear slot will not begin charging until the
battery in the front slot is fully charged.
Note: Times are approximate. Charging for the specified
time will charge the battery to about 80% capacity.
At 80% capacity, the battery scroll bars on your
phone’s display stop scrolling. To obtain 100%
charge, allow another two hours to “trickle-charge”
the battery.
98
Standby and Talk Times
Digital
Battery Option
Analog
Talk Time
Standby Time
Talk Time
BLS-2N Extended
Battery Li-Ion
900 mAh
2 hrs to
2 hrs 55 min
40 min to
1 hr 25 min 10 to 15 hrs (ana)
70 to 110 hrs (dig)
BMS-2S Extended
Battery NiMH
900 mAh
2 hrs to
2 hrs 55 min
40 min to
1 hr 25 min 10 to 15 hrs (ana)
70 to 110 hrs (dig)
BLS-4 Ultra
Extended Battery 4 hrs 50 min
3 hrs 20 min to 1 hr 10 min to 115 to 180 hrs (dig)
2 hrs 25 min 15 to 23 hrs (ana)
Li-Ion
1500 mAh
Note: The times shown are approximate, and represent a
range for either standby or talk times (not a combi-
nation of both). Battery operation times vary accord-
ing to signal conditions, network parameters set by
the service provider, and how you use your phone.
Note: Dispose of used batteries in accordance with local
regulations.
Chargers and other accessories
The following chargers and other accessories are available
for your phone; please see your dealer for details. Also,
refer to the accessories brochure that was included in your
sales package for the entire line of Nokia Original
Accessories.
Standard Travel Charger
(ACP-7U)
This lightweight (187g) and durable
AC charger can be used with all
battery options.
To use the Standard Travel Charger,
plug it into a wall outlet and
connect the lead from the charger to the base of your
phone. The charger can also be used together with the
Compact Desktop Charging Stand (DCH-8).
99
Rapid Travel Charger (ACP-9U)
This lightweight (100g) AC charger can
be used with all battery options. Calls
can be made during charging, even
with a fully discharged battery.
To use the Rapid Travel Charger
(ACP-9U), plug it into a standard
120V AC wall outlet, and connect
the lead from the charger to the
base of your phone.
The charger can also be used together with the optional
Compact Desktop Charging Stand (DCH-8). Approximate
charging times for discharged batteries are shown at the
beginning of this section.
Rapid Cigarette Lighter Charger (LCH-9)
You can charge your phone’s
battery from your vehicle
battery by using the Rapid
Cigarette Lighter Charger
(LCH-9).
Calls are possible during
charging. A green light indicates the charger is ready for
charging (when not charging) or finished charging (if it
has been charging). The battery charging times are the
same as those for the Rapid Travel Charger (ACP-9U)
The input voltage range is from 11 to 32V DC, negative
grounding. Avoid prolonged charging with the Rapid
Cigarette Lighter Charger (LCH-9) when the car engine is
not running; this may cause the battery of your car to
drain. Note also that in some cars the cigarette lighter
plug is not provided with electricity if the ignition is not
switched on.
100
Desktop Charging Stand (DCH-8)
Used together with the
Standard Travel Charger
(ACP-7U) or the Rapid Travel
Charger (ACP-9U), the
Compact Desktop Charging
Stand (DCH-8) is an
economical choice when you
need your phone close at hand.
With the battery still attached, place your phone in the
charging stand to begin charging your phone’s battery.
Charging is indicated by the scrolling battery bars on the
right side of your phone’s display. When the scrolling
stops, the battery is approximately 80% charged.
To get a fully charged battery, leave your phone in the
charging stand for a couple of hours after the scrolling
stops.
Compact Desktop Charging Stand (DCH-9)
Compatible with all
battery options, the
Compact Desktop
Charging Stand can be
used with the Standard
Travel Charger (ACP-7U)
or the Rapid Travel
Charger (ACP-9U). The
Compact Desktop Charging Stand provides mounting for
both the phone and a spare battery. Plug the charger into
a wall outlet and connect the connector to the back of
the Compact Desktop Charging Stand. Place your phone
and/or a spare battery in the stand to begin battery
charging.
When the phone is charging, no lights are displayed on
the stand (unless a spare battery is being charged, too);
check the charging status of the phone battery on your
phone’s screen.
101
Charging moves to the rear slot once the front battery is
100% charged.
When the spare battery is charging, check the status
indicator on the left side of the charging stand. A red
light indicates that the battery is charging; a green light
indicates that the battery is charged to at least 80% of
its capacity.
The phone has the built-in intelligence to maintain the
battery, so there is no need for a discharge feature on the
stand.
102
10. Troubleshooting
What if charging fails?
If your phone displays Not charging, charging is suspended.
Make sure the battery is connected to an approved charging
device and that the battery is at room temperature. Extreme
temperatures, hot or cold, can affect your battery’s
performance and prevent charging.
If charging still fails, disconnect the charger from your
phone. Then reconnect the charger to your phone and
retry. If you still experience charging problems, contact
your dealer and, if necessary, bring your phone in to have
it serviced. Don’t forget your battery and charger.
No service
If you’re outside the wireless service area, No service will
display on your phone. No calls can be made or received,
including emergency calls.
What if the call doesn’t go through?
Your phone can make and receive calls only when it’s
switched on and in the wireless network’s service area.
No service means that you’re probably outside the
wireless service area. No calls can be made or received.
Check call restrictions means calls to the phone number
page 62).
Note: Check with your service provider for information
about when you need to dial a ‘1’ and/or an area
code in addition to the number.
If you make a mistake dialing
Press Clear to delete the last character entered, or press
and hold Clear to delete all characters entered.
103
11. Reference Information
Important Safety Information
Traffic Safety
Do not use a hand-held telephone while driving a vehicle.
If using a hand-held phone park the vehicle before conversing.
Always secure the phone in its holder; do not place the phone on
the passenger seat or where it can break loose in a collision or
sudden stop.
The use of an alert device to operate a vehicle’s lights or horn on
public roads is not permitted.
Remember, road safety always comes first!
Operating Environment
Remember to follow any special regulations in force in any area
and always switch off your phone whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user’s guide for detailed safety instructions. Do not
connect incompatible products.
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the equipment
should only be used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from radio frequency
(RF) signals. However, certain electronic equipment may not be
shielded against the RF signals from your wireless phone.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation
of 6 inches (20 cm.) be maintained between a handheld wireless
phone and a pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with the
independent research by and recommendations of Wireless
Technology Research. Persons with pacemakers:
•
Should always keep the phone more than 6 inches (20 cm)
from their pacemaker when the phone is switched on;
•
•
Should not carry the phone in a breast pocket;
Should use the ear opposite the pacemaker to minimize the
potential for interference.
•
If you have any reason to suspect that interference is taking
place, switch off your phone immediately.
104
Hearing Aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may want to consult
your service provider.
Other Medical Devices
Operation of any radio transmitting equipment, including cellular
phones, may interfere with the functionality of inadequately
protected medical devices. Consult a physician or the manufacturer
of the medical device to determine if they are adequately shielded
from external RF energy or if you have any questions. Switch off
your phone in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF
energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles (for example, electronic fuel
injection systems, electronic anti-skid (anti-lock) braking systems,
electronic speed control systems, air bag systems). Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices so
require.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire resulting in
bodily injury or even death.
Users are advised to switch off the phone while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats;
chemical transfer or storage facilities; vehicles using liquefied
petroleum gas (such as propane or butane); areas where the air
contains chemicals or particles, such as grain, dust or metal
powders; and any other area where you would normally be
advised to turn off your vehicle engine.
105
Vehicles
Only qualified personnel should service the phone, or install the
phone in a vehicle. Faulty installation or service may be dangerous
and may invalidate any warranty which may apply to the unit.
Check regularly that all wireless phone equipment in your vehicle
is mounted and operating properly.
Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment, in the area over the air
bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates, serious
injury could result.
Switch off your phone before boarding an aircraft. The use of
wireless telephones in an aircraft may be dangerous to the
operation of the aircraft, disrupt the wireless telephone network
and may be illegal.
Failure to observe these instructions may lead to the suspension
or denial of telephone services to the offender, or legal action, or
both.
Emergency Calls
IMPORTANT!
This phone, like any wireless phone, operates using radio signals,
wireless and landline networks as well as user-programmed
functions which cannot guarantee connection in all conditions.
Therefore, you should never rely solely upon any wireless phone
for essential communications (for example, medical emergencies).
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone features
are in use. Check with local service providers.
Making an Emergency Call
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press
.
106
Note: If certain features are in use (keyguard, restrict calls, etc.),
you may first need to turn those features off before you can
make an emergency call. Consult this document and your
local cellular service provider.
When making an emergency call, remember to give all the necessary
information as accurately as possible. Remember that your
wireless phone may be the only means of communication at the
scene of an accident - do not cut off the call until given
permission to do so.
Radio Frequency (RF) Signals
THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS
FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed the emission limits for exposure
to radiofrequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. These limits are part of
comprehensive guidelines andestablishpermitted levels of RF energy
for the general population. The guidelines are based on standards
that were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed to assure
the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted
using standard operating positions specified by the FCC with the
phone transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is because
the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the
closer you are to a wireless base station antenna, the lower the
power output.
Before a phone model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for
each model. The highest SAR value for this model phone when
tested for use at the ear is 1.41 W/kg and when worn on the body,
as described in this users guide, is 1.34 W/kg. (Body-worn
measurements differ among phone models, depending upon
available accessories and FCC requirements). While there may be
differences between the SAR levels of various phones and at
various positions, they all meet the government requirement.
107
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID: GMLNSD-3AW.
For body worn operation, to maintain compliance with FCC RF
exposure guidelines, use only Nokia approved accessories. When
carrying the phone while it is on, use the specific Nokia belt-clip
that has been tested for compliance.
Use of non-Nokia-approved accessories may violate FCC RF
exposure guidelines and should be avoided.
________________________________________________
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and
to account for any variations in measurements.
108
Care and Maintenance
Your phone is a product of superior design and craftsmanship and
should be treated with care. The suggestions below will help you
to fulfill any warranty obligations and allow you to enjoy this
product for many years. When using your phone, battery, charger,
OR any accessory:
•
•
•
•
Keep it and all its parts and accessories out of small children’s
reach.
Keep it dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
Do not use or store it in dusty, dirty areas as its moving parts
can be damaged.
Do not store it in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and warp or
melt certain plastics.
•
Do not store it in cold areas. When the phone warms up (to its
normal operating temperature), moisture can form inside the
phone, which may damage the phone's electronic circuit
boards.
•
•
•
Do not attempt to open it. Non-expert handling of the device
may damage it.
Do not drop, knock or shake it. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean it. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
•
•
Do not paint it. Paint can clog the device’s moving parts and
prevent proper operation.
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications or attachments could
damage the phone and may violate regulations governing
radio devices.
•
If the phone, battery, charger, or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
109
12. Technical Data
Wireless System
Weight
Dual-Band CDMA and AMPS
142.5 g (5.0 oz.) with BLS-2N
900 mAh Li-Ion Battery
129 cc (7.9 cu. in.)
Size
Frequency Range
Lowband
824.04 - 848.97 MHz (TX)
869.04 - 893.97 MHz (RX)
1850.04 - 1909.92 MHz (TX)
1930.08 - 1989.96 MHz (RX)
3.6 V nominal
Highband
Battery Voltage
Charging current
850 mAh max.
Operating Temperature -30°C to + 60°C
(-22°F to + 140°F)
Number of Channels 832 lowband; 1150 highband
Number of NAMs
Memory Locations
Memory Capacity
2
200
Alpha: 16 characters per location
Numeric: 32 digits per location
14.4 kbps
Data transmission
Fax
Group 3 Send/Receive (14.4* kbps)
Note: * Although your phone is capable of data transmission rates
up to 56 Kbps, your actual transmission rate may vary, due to your
service provider’s network. Please check with your service provider
for actual data transmission rates.
Nokia, Connecting People and the Original Accessories logos are
trademarks of Nokia Corporation and/or its affiliates.
The information contained in this phone was written for dual-
mode CDMA and AMPS phones.
The right to make changes and improvements to any of the products
described in this guide without prior notice is reserved.
©2000 Nokia Mobile Phones. All rights reserved.
These commodities are authorized by the U.S. Government for
export only to Canada, Mexico, or the United States. They may not
be resold, diverted, transferred, or otherwise disposed of in any other
country, either in their original form or after being incorporated
through an intermediate process into other end-items, without the
written approval of the U.S. Department of State.
Part No. 9360095 Issue No. 1
Printed in Canada
10/00
110
13. Warranty
NOKIA One-Year Limited Warranty
Nokia Mobile Phones, Inc. (“NMP”) warrants that this cellular
phone (“Product”) is free from defects in material and workmanship
that result in Product failure during normal usage, according to
the following terms and conditions:
1. The limited warranty for the Product extends for ONE (1) year
beginning on the date of the purchase of the Product.
2. The limited warranty extends to the original purchaser of the
Product (“Consumer”) and is not assignable or transferable to any
subsequent purchaser/end-user.
3. The limited warranty extends only to Consumers who purchase
the Product in the United States.
4. During the limited warranty period, NMP will repair, or replace,
at NMP's option, any defective parts, or any parts that will not
properly operate for their intended use with new or factory rebuilt
replacement items if such repair or replacement is needed
because of product malfunction or failure during normal usage.
No charge will be made to the Consumer for any such parts. NMP
will also pay for the labor charges incurred by NMP in repairing
or replacing the defective parts. The limited warranty does not
cover defects in appearance, cosmetic, decorative or structural
items, including framing, and any non-operative parts. NMP's
limit of liability under the limited warranty shall be the actual
cash value of the Product at the time the Consumer returns the
Product for repair, determined by the price paid by the Consumer
for the Product less a reasonable amount for usage. NMP shall not
be liable for any other losses or damages. These remedies are the
Consumer’s exclusive remedies for breach of warranty.
5. Upon request from NMP, the Consumer must prove the date of
the original purchase of the Product by a dated bill of sale or
dated itemized receipt.
6. The Consumer shall bear the cost of shipping the Product to
NMP in Melbourne, Florida. NMP shall bear the cost of shipping
the Product back to the Consumer after the completion of service
under this limited warranty.
7. The Consumer shall have no coverage or benefits under this
limited warranty if any of the following conditions are applicable:
a) The Product has been subject to abnormal use, abnormal
conditions, improper storage, exposure to moisture or dampness,
unauthorized modifications, unauthorized connections,
unauthorized repair, misuse, neglect, abuse, accident, alteration,
improper installation, or other acts which are not the fault of
NMP, including damage caused by shipping.
111
b) The Product has been damaged from external causes such as
collision with an object, or from fire, flooding, sand, dirt, windstorm,
lightning, earthquake or damage from exposure to weather
conditions, an Act of God, or battery leakage, theft, blown fuse, or
improper use of any electrical source, or damage caused by the
connection to other products not recommended for
interconnection by NMP.
c) NMP was not advised by the Consumer in writing of the alleged
defect or malfunction of the Product within fourteen (14) days
after the expiration of the applicable limited warranty period.
d) The Product serial number plate or the accessory data code has
been removed, defaced or altered.
e) The defect or damage was caused by the defective function of
the cellular system, by inadequate signal reception by the
external antenna, or by viruses or other software problems
introduced into the Product.
8. Nokia does not warrant uninterrupted or error-free operation
of the Product. If a problem develops during the limited warranty
period, the Consumer shall take the following step-by-step
procedure:
a) The Consumer shall return the Product to the place of purchase
for repair or replacement processing.
b) If “a” is not convenient because of distance (more than 50
miles) or for other good cause, the Consumer shall ship the
Product prepaid and insured to:
Nokia Mobile Phones, Inc.
Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL 32901
c) The Consumer shall include a return address, daytime phone
number and/or fax number, complete description of the problem,
proof of purchase and service agreement (if applicable). Expenses
related to removing the Product from an installation are not
covered under this limited warranty.
d) The Consumer will be billed for any parts or labor charges not
covered by this limited warranty. The Consumer will be responsible
for any expenses related to reinstallation of the Product.
e) NMP will repair or authorize the repair of the Product under the
limited warranty within 30 days after receipt of the Product by
NMP or an NMP authorized service center. If NMP cannot perform
repair covered under this limited warranty within 30 days, or after
a reasonable number of attempts to repair the same defect, NMP
at its option, will provide a replacement Product or refund the
purchase price of the Product less a reasonable amount for usage.
112
f) If the Product is returned to NMP during the limited warranty
period, but the problem with the Product is not covered under the
terms and conditions of this limited warranty, the Consumer will
be notified and given an estimate of the charges the Consumer
must pay to have the Product repaired, with all shipping charges
billed to the Consumer. If the estimate is refused, the Product will
be returned freight collect. If the Product is returned to NMP after
the expiration of the limited warranty period, NMP's normal
service policies shall apply and the Consumer will be responsible
for all shipping charges.
9. The Product consists of newly assembled equipment that may
contain used components that have been reprocessed to allow
machine compliance with Product performance and reliability
specifications.
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS
FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE
DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY.
OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE
CONSUMER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NMP SHALL NOT
BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF ANTICIPATED
BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, PUNITIVE
DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED
EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE
EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY
THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO
PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE
PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH
OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL
OR EQUITABLE THEORY, EVEN IF NMP KNEW OF THE LIKELIHOOD
OF SUCH DAMAGES. NMP SHALL NOT BE LIABLE FOR DELAY IN
RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF
USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.
11. Some states do not allow limitation of how long an implied
warranty lasts, so the above one-year warranty limitation may
not apply to you (the Consumer). Some states do not allow the
exclusion or limitation of incidental and consequential damages,
so certain of the above limitations or exclusions may not apply to
you (the Consumer). This limited warranty gives the Consumer
specific legal rights and the Consumer may also have other rights
which vary from state to state.
12. NMP neither assumes nor authorizes any authorized service
center or any other person or entity to assume for it any other
obligation or liability beyond that which is expressly provided for
in this limited warranty including the provider or seller of any
extended warranty or service agreement.
113
13. This is the entire warranty between NMP and the Consumer,
and supersedes all prior and contemporaneous agreements or
understandings, oral or written, and all communications relating
to the Product, and no representation, promise or condition not
contained herein shall modify these terms.
14. This limited warranty allocates the risk of failure of the
Product between the Consumer and NMP. The allocation is
recognized by the Consumer and is reflected in the purchase price
of the Product.
15. Any action or lawsuit for breach of warranty must be
commenced within eighteen (18) months following delivery of
the Product.
16. Questions concerning this limited warranty may be directed
to:
Nokia Customer Care Center, USA
7725 Woodland Center Blvd., Ste. 150
Tampa, FL 33614
Telephone: 1-888-NOKIA2U (1-888-665-4228)
or (813) 288-3800
Facsimile: (813) 249-9619
TTY Users: 1-800-24NOKIA (1-800-246-6542)
17. The limited warranty period for NMP supplied attachments
and accessories is specifically defined within their own warranty
cards and packaging.
©Nokia is a registered trademark of Nokia Corporation.
114
Call forwarding 24
Call log 25
14. Index
Clearing call lists 31
Dialed calls 36
Missed calls 53
Received calls 65
Call restrictions 66
Call settings 26
Call timers 26
A
Access codes 18
Lock code 46
Security code 70
Accessories 97
Batteries 97
Chargers 99
All calls timer 20
Clearing call timers 31
Current call timer 34
Life timer 45
Call waiting 27
Caller ID 28
Alarm Clock
Power off 19
Setting 18
Snooze 19
Alarm clock 18
All calls timer 20
Answering a call 16
Automatic answer 20
Automatic redial 20
Blocking 71
Send own caller ID 71
Calling card 29
Making calling card
calls 30
Storing calling cards 29
Care and maintenance 109
Charging 3
Chargers 99
When is a good time to
charge? 4
When is charging
complete? 4
B
Basics 14
Answering a call 16
Ending a call 16
Getting a strong signal 14
Making a call 15
Switching phone on and
off 14
Batteries 97
Attaching the battery 3
Charging the battery 3
Charging times 98
Discharging batteries 5
Important battery
information 6
Removing the battery 5
Standby and talk times 99
Blocking
Clear call lists 31
Clear timers 31
Clock 32
Alarm clock 18
Conference calls 33
Cool features 7
Alarm clock 18
Calendar 22
Call log 25
Caller ID 71
CLI ringing tones 35
Conference calls 33
Current call timer 34
Games 41
C
Calculator 21
Calendar 22
One-touch dialing 57
115
Profiles 63
I
Restrict calls 66
Vibrating alert 77
Current call timer 34
Inbox 43
In-call menu 43
K
D
Keyguard 16
Data and fax calls 35
Data calls 93
Configuring software 94
Manual selection 95
Prearranged 95
Receiving 95
Activating Keyguard 16
Deactivating Keyguard 17
Keypad tones 43
L
Languages 44
Last number redial 44
Life timer 45
Lights 45
Starting a call 94
Dialed calls 36
Lock code 46
Changing your lock code
E
Earpiece volume 80
Editing
123 mode 39
Phone lock 62
M
ABC mode 38
Making a call 15
Making calling card calls 30
Manual touch tones 46
Memory status 47
Menu and submenu
numbering 10
Special characters 39
Emergency key 9 37
Emergency key 9 37
Ending a call 16
Entering letters and
numbers 38
Message alert tone 47
Messages 47
messages
mobile 82
receiving mobile 82
Microphone 48
Muting and unmuting 48
Minibrowser 48
Missed calls 53
mobile messages 82
Erasing names and
F
Fax and data calls 35
Fax calls 93
Configuring software 94
Manual selection 95
Prearranged 95
Receiving 95
N
Starting a call 94
NAM Selection 54
NAM update 55
Names
G
Games 41
Adding to phone book 59
Getting connected 3
116
Network feature setting 56
Network services
Call Forwarding 24
Call Waiting 27
R
Ready screen 8
Received calls 65
Redialing
Caller ID 28
Last number redial 44
Reference information 104
Restoring factory settings 65
Restrict calls 66
Ringing options 68
Ringing tones 68
Ringing volume 80
Roaming 73
Conference calls 33
Voice messages 77
Numbers
Adding to phone book 59
O
One-touch dialing 57
P
Roaming indicators 73
Phone book 58
Adding a name 59
Erasing names and
numbers 62
S
Safety
At a glance 1
Scrolling view 69
Phone lock 62
Lock code 46
Important safety
information 104
Using this guide 2
Scroll bar 9
Unlocked phone
number 76
Scroll key 9
Phone numbers
Adding to phone book 59
Phone settings 63
Profiles 63
Scrolling view 69
Security code 70
Changing your security
code 71
Customizing profiles 64
Keypad tones 43
Lights 45
Security settings 70
Service Types 73
Setting time (manual) 32
Setting time (network) 33
Settings 72
Signal strength 14
Softkeys 8
Special characters (names)
Special characters
(numbers) 40
Storing a calling card 29
Storing names and numbers
Quick save 72
Message alert tone 47
Renaming profiles 65
Ringing options 68
Ringing tones 68
Ringing volume 80
Selecting profiles 64
Vibrating alert 77
Warning and game
tones 80
Q
Quick saving numbers 72
117
Switching phone on
and off 14
Synchronization 72
System choices 74
System selection 73
Roaming 73
V
Vibrating alert 77
Voice messages 77
Greetings, passwords,
and prompts 78
Listening to your voice
messages 78
Setting up your voice
mailbox 78
T
Text messages
Volume 79
Earpiece volume 80
Ringing volume 80
Inbox 43
Touch tones 75
Manual touch tones 46
Touch tone length 74
Troubleshooting 103
W
Warning and game tones 80
Welcome note 81
Y
U
Your phone A to Z 18
Unlocked phone number 76
Use number 26
Using your phone 8
Navigating tools 8
Menu and submenu
numbering 10
Scroll bar 9
Scroll key 9
Softkeys 8
118
NOTES
119
NOTES
120
NOTES
121
Para obtener un manual del usuario en español favor de
llamar o enviar un fax al teléfono 1-888-NOKIA2U,
fax 813-249-9619.
122
|