Nokia Mobile Phones, Inc.
6200 Courtney Campbell Causeway, Ste.900
Tampa, FL 33607
(
) or
Telephone: 1-888-NOKIA2U 1-888-665-4228
(813) 288-3800
Facsimile: (813) 287-6612
TTY Users: 1-800-24NOKIA (1-800-246-6542)
OWNER’S
Printed in Canada
9352105 N1243
MANUAL
Keys
Fixed
(Power key)
Press and hold to turn your phone on
or off.
antenna
Do not
Nokia 6185
attempt to
extend or
remove!
User Guide
Version 2 May, 1999
Earpiece
Press the scroll
keys up or down
during a call to
adjust the lis-
tening volume.
(Softkeys)
Their current
function is dis-
played above
the key; these
labels change
when accessing
the various
(Scroll keys)
Scroll through
menus, sub-
menus, and the
phone book.
Press and hold
for continuous
scrolling.
phone features.
Menu
Names
Push this key to
end a phone
call or to return
to the start
screen.
Use this key to
dial and answer
phone calls.
Press to select
upper or lower
case letters
when editing
text. Press and
hold while
or
is
Press this key to
select special
characters when
entering text and
numbers.
displayed to
enter numbers
rather than
letters.
Use this key to enter an empty
space between letters when
entering text.
Indicators and Icons
You have an active call.
The phone is waiting for you to enter numbers or text.
You have turned off your phone’s keypad tones,
warning tones, message alert tones, and set your
ringing tone to Silent.
Keyguard has been activated to help prevent any
accidental keypresses.
.
You have one or more voice messages waiting.
You have one or more unread text messages waiting.
Digital service is available.
Your phone is roaming outside of your home system/
area.
Any characters you enter will be upper-case letters or
numbers. Press the # key to switch letter case.
Any characters you enter will be lower-case letters or
numbers. Press the # key to switch letter case.
Appears when you press and hold the # key while
editing text. Only numbers can be entered while in
this mode.
The alarm clock is set.
Your phone is ready to place or receive a data call.
You have a reminder in your calendar to do something
(appears only on Calendar display).
You have a reminder in your calendar that it’s
someone’s birthday (appears only on Calendar
display).
You have a reminder in your calendar to call someone
(appears only on Calendar display).
You have a reminder in your calendar of a meeting
(appears only on Calendar display).
Table of Contents
Safety At A Glance . . . . . . . . . . . . . . . . . . . . . . 1
Getting Connected. . . . . . . . . . . . . . . . . . . . . . . 3
Attaching your battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Charging your new battery . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Removing the battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Important Battery Information . . . . . . . . . . . . . . . . . . . . . . . 6
Cool Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using Your Phone. . . . . . . . . . . . . . . . . . . . . . . . 8
What is the ‘start screen’?. . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Navigating tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Scrolling through the main menu. . . . . . . . . . . . . . . . . . . . . 9
Menu & submenu numbering . . . . . . . . . . . . . . . . . . . . . . . 10
Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Help Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Summary of Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Switching the phone on and off . . . . . . . . . . . . . . . . . . . . . 13
Getting a strong signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Keyguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Your Phone A to Z . . . . . . . . . . . . . . . . . . . . . . 17
ABC/abc mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Access codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
All calls timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Automatic answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Automatic redial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Call forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Call restrictions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Call timers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Call waiting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
iv
Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Calling card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Clear call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Clear timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Conference call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Current call timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Data and fax calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Dialed calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Earpiece volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Emergency calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Entering text and numbers . . . . . . . . . . . . . . . . . . . . . . . . . .35
Fax calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Inbox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
In-call menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Keypad tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Last number redial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Life timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Listen to voice messages. . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Manual touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Memory status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Message alert tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
NAM selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
NAM update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Network feature setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
One-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Paging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Personal Tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Phone book. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Phone lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Received calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Restore factory settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Restrict calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Ringing options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Ringing tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Ringing volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Scrolling view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Security settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Security code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Send own caller ID with next call . . . . . . . . . . . . . . . . . . . . 63
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Storing a name & number . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
System Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Text messages & paging . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Touch tone length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Touch tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Unlocked phone number . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Vibrating alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Voice mailbox number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Voice messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Warning and game tones. . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Welcome note. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Data and Fax Calls. . . . . . . . . . . . . . . . . . . . . . 77
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Configuring your data or fax software . . . . . . . . . . . . . . . . 78
To start a data or fax call. . . . . . . . . . . . . . . . . . . . . . . . . . . 78
To receive a data or fax call. . . . . . . . . . . . . . . . . . . . . . . . . 79
Manual selection of incoming data/fax calls. . . . . . . . . . . 79
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Chargers & Other Accessories . . . . . . . . . . . . . . . . . . . . . . . 83
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . 85
Reference Information. . . . . . . . . . . . . . . . . . . 86
Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . 91
v
vi
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NOKIA One-Year Limited Warranty . . . . . . . . . . . . . . . . . . .92
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
vii
1. Safety At A Glance
Read these simple guidelines before using your
phone. Failure to comply with these guidelines may
be dangerous or illegal.
For more detailed safety information, “Important
Safety Information” on page 86.
Road Safety Comes First
Don’t use a hand-held phone while driving; park the
vehicle first.
Switch Off In Hospitals
Switch off your phone when near medical
equipment. Follow any regulations or rules in force.
Switch Off On Aircraft
Mobile phones can cause interference. Using them
on aircraft is illegal.
Switch Off When Refueling
Do not use the phone at a refueling point. Do not use
near fuels or chemicals.
Switch Off Near Blasting
Do not use the phone where blasting is in progress.
Observe restrictions, and follow any regulations or
rules in force.
Interference
All mobile phones may get interference which could
affect performance.
Use Sensibly
Use only in the normal position (to ear). Avoid
unnecessary contact with the antenna when phone
is on.
Qualified Service
Only qualified service personnel may install or repair
cellular phone equipment.
1
Accessories and Batteries
2. Getting Connected
Use only approved accessories and batteries. Do not
connect incompatible products.
This section will help you understand the ins and outs of
charging and using your battery.
FCC/Industry Canada Notice
Attaching your battery
Your phone may cause TV or radio interference (e.g. when using a
telephone in close proximity to receiving equipment). The FCC/
Industry Canada can require you to stop using your telephone if
such interference can not be eliminated. If you require assistance,
contact your local service facility.
Simply place the battery
in the grooves on the
back of your phone. Then
slide the battery upward
until it clicks.
This device complies with part 15 of the FCC rules. Operation is
subject to the condition that this device does not cause harmful
interference.
Note: Use only those
batteries approved by the
phone manufacturer and
recharge your battery only
with the chargers approved
by the manufacturer.
Using this Guide
The wireless phone described in this guide is approved for use in
CDMA/AMPS networks.
A number of features included in this guide are called Network
Services. They are special services provided by wireless service
providers. Before you can take advantage of any of these Network
Services, you must subscribe to the service(s) from your home
service provider and obtain instructions for their use.
See “Important Battery Information” on page 6.
Charging your new battery
Your phone can be used with either a rechargeable Li-Ion
or NiMH battery. Note that a new battery’s full
performance is achieved only after two or three complete
charge and discharge cycles.
Disclaimer
It’s possible that you may not be able to activate your phone on
all wireless systems. Please see your service provider for details.
With your phone powered
on or off, connect the lead
from the charger to the
bottom of your phone.
You can also place your
phone on the charging
stand (with the stand
connected to a standard
120V AC outlet via either the ACP-7U or ACP-9U AC/DC
adaptors).
When the battery begins charging, your phone will beep
once and the battery strength indicator on the right side
of the display will begin to scroll after a few seconds.
2
3
If your phone displays Not charging, charging is
Charging times depend on the type of battery and
charger used.
suspended. Check that the battery is connected only to an
approved charging device. If the battery is very hot or
cold, wait for a while; charging will automatically resume
after the battery is restored to its normal operating
temperature. If charging still fails, contact your dealer.
For approximate charging and operating times, see “Batteries” on
page 81.
Can you make calls while charging?
When a charger is not in use, disconnect it from the power
source. Do not leave the battery connected to a charger for
longer than a week, since overcharging may shorten its life.
Yes, you can. But your battery may not charge while a call
is in progress (depending on which charger you are
using). Charging should resume once you end the call.
Important: If left unused, a fully charged battery will
discharge itself over time.
See "Chargers & Other Accessories" on page 83 for more
information.
Discharging NiMH batteries
When is a good time to charge?
A NiMH battery lasts longer and performs better if you
fully discharge it from time to time. To discharge the
battery, leave your phone switched on until the battery is
drained. The phone will display several messages that the
battery is low and that you need to recharge it; just
ignore them.
Actually, you can charge anytime. If you have a NiMH
battery, you should allow it to completely discharge once
in a while.
When your phone beeps once and displays Battery low,
you only have a couple of minutes of talk time remaining.
The repetition rate of these battery-low warnings depend
on the remaining battery capacity and the battery
condition. These warnings are more frequent when you’re
in a call.
You can also use the battery discharge feature of any
approved accessory available for your phone. Do not
attempt to discharge the battery by any means other
than those just described.
Note: The phone will not give you the warning tone under certain
conditions. See “Warning and game tones” on page 75.
Removing the battery
Once all the power has drained from your battery, you’ll
hear three beeps with the message Recharge battery on
your display. At this point, your phone will switch itself
off and you’ll need to recharge your battery.
Note: Switch off the phone before removing the battery!
1. Press and hold the
button at the top
of the battery.
When is charging complete?
2. Slide the battery
toward the bot-
When the charge indicators stop scrolling, your
phone is considered fully charged. However, a
slight increase in charge may occur if your phone
is left connected to the charger for a couple more
hours. This is called “trickle charge” or
“maintenance charge.”
tom of the phone.
3. Lift the battery off
the phone.
4
5
Important Battery Information
Cool Features
•
The battery can be charged and discharged hundreds of
times but it will eventually wear out. When the operating
time (talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
All the features in your phone are cool. It’s just that some
are cooler than others!
For example, did you know that you can lock the keys on
your phone to prevent accidental key presses and phone
calls? Or that you can call someone with the touch of a
single button? You can also stop your phone from ringing
without even answering the call.
•
Use only batteries approved by the phone manufacturer
and recharge your battery only with the chargers
approved by the manufacturer. When a charger is not in
use, disconnect it from the power source. Do not leave the
battery connected to a charger for longer than a week,
since overcharging may shorten its life. If left unused a
fully charged battery will discharge itself over time.
These are just some of the many Cool Features you’ll find
in your phone. Look for the
owner’s manual to find them.
icon throughout this
•
•
(NiMH batteries only) For optimal operation, discharge the
battery from time to time by leaving your phone switched
on until it turns itself off. You can also use the battery
discharge feature of any approved accessory available for
your phone. Do not attempt to discharge the battery by
any other means.
Temperature extremes will affect the ability of your
battery to charge: allow it to cool down or warm up first.
•
•
Use the battery only for its intended purpose.
Never use any charger or battery which is damaged or
worn out.
•
•
Do not short circuit the battery. Accidental short
circuiting can occur when a metallic object (coin, clip, or
pen) causes direct connection of the + and - terminals of
the battery (metal strips on the back of the battery), for
example when you carry a spare battery in your pocket or
purse. Short circuiting the terminals may damage the
battery or the connecting object.
Leaving the battery in hot or cold places, such as in a
closed car in summer or winter conditions, will reduce the
capacity and lifetime of the battery. Always try to keep
the battery between 59º F and 77º F (15º C and 25º C). A
phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. NiMH
batteries’ performance is particularly limited in
temperatures below 14º F (-10º C). Li-Ion batteries’
performance is particularly limited in temperatures below
32º F (0º C).
•
•
Do not dispose of batteries in a fire!
Dispose of used batteries in accordance with any local
regulations.
6
7
Scroll key
3. Using Your Phone
Your phone has a scroll key located just below your
display. It has two arrows on it that look like s and t .
Press the scroll key up or down to navigate through your
phone’s menus and submenus. You can also use it to
scroll through names and numbers in your phone book.
The first few days you have your phone, play with it to
learn how the menu and submenu system works. The
more you learn how to access these menus and
submenus, the more fun you’ll have with your phone.
Also, when editing names and numbers (e.g. numbers in
your phone book), you may notice a cursor flashing
within the name or number. Pressing the scroll key up or
down moves the cursor within the text, allowing you to
insert letters, numbers, or special characters via the
keypad.
This section describes the different methods of using your
phone menus and submenus.
What is the ‘start screen’?
The start screen appears when you first turn your phone
on, in its idle state.
See “Entering text and numbers” on page 35 for more details.
Anytime you want to get to the start screen, press
except during a call (unless you want to hang up).
,
Scroll bar
CAUTION: If you press
when the phone is
When you access your phone’s menu and
submenus, you will notice a scroll bar at the far
right of the screen. This bar indicates where you
are in the menu structure; each “tab” on the bar
represents a different menu item.
requesting input (for example, a setting, phone number,
name, etc.), the phone displays the start screen, the input
is not saved, and the option is not selected.
Navigating tools
For example, press Menu once. The scroll bar appears
with the first (top) tab displayed. A different tab appears
each time you press the t or s key to move up and down
through the menu structure. The scroll bar works the
same way with submenus.
Softkeys
Your phone has two softkeys that
appear below the display. Their
current function is indicated by the
words appearing above them.
Simply press the corresponding key
under the choice you wish to select.
Scrolling through the main menu
Press Menu at the start screen. Then press t or s to
reach the desired menu item.
This illustration shows the phone at the start screen. The
start screen always displays Menu on the left and Names
on the right. Menu allows you to access your phone’s
menus and submenus. Names allows you to access your
phone book.
Press Select, Optionsor OK (whichever appears) to enter
submenus and to choose options.
Press Exit to exit the present menu or Back to go back
one level.
See “Using Shortcuts” on page 10 and “Personal Tone” on page 50.
8
9
Menu & submenu numbering
Summary of Menu Items
01Messages
01-1Text Messages
01-1-1 Inbox
When you scroll to a menu or submenu, the menu
number and/or submenu number appears on the display
above the scroll bar. If you become familiar with these
numbers, you can use them as shortcuts for accessing
different menus.
01-1-2 Saved
01-1-3 Erase all
01-2Voice messages
For example, when you scroll to Menu 2 (Call log) the
number 2 appears in the top right-hand corner of the
display. If you scroll to menu 4 (Settings), submenu 3
(Security settings), your phone will display 4-3 in the
top right-hand corner.
01-2-1 Listen to voice messages
01-2-2 Voice mailbox number
01-3Welcome Note
2 Call log
2-1 Missed calls
2-2 Received calls
2-3 Dialed calls
2-4 Clear call lists
2-4-1 All
See “Summary of Menu Items” on page 11 for a list of your phone’s
features along with their menu locations.
Also, see “Using Shortcuts” on page 10.
2-4-2 Missed
2-4-3 Received
2-4-4 Dialed
Using Shortcuts
Now that you know about shortcuts, use them as a quick
and easy way to access a menu without having to scroll
through other menus.
2-5 Call timers
2-5-1 Last call
2-5-2 All calls
Press Menu, then menu number, then submenu number.
For example, press Menu, then 2, then 2 again to access
the dialed calls feature (Menu 2-2).
2-5-3 Life timer
2-5-4 Clear timers
3 Profiles
Press the menu and submenu numbers within a couple of
seconds of each other when using this method.
3-1 Normal (the following options appear in all profiles)
3-1-1 Select
3-1-2 Customize
For a summary of your phone’s menu structure, see “Summary of
Menu Items” on page 11.
3-1-2-1 Ringing options
3-1-2-2 Ringing volume
3-1-2-3 Ringing tone
3-1-2-4 Vibrating alert
3-1-2-5 Keypad tones
3-1-2-6 Warning and game tones
3-1-2-7 Message alert tone
3-1-2-8 Lights (appears only in Car)
Help Text
If you’re not sure how a feature works, wait just a few
seconds and help text will automatically appear for most
of your phone’s features. Press More to see the next page
of the text or Back to exit the help text. After a while, the
help text will disappear by itself.
3-1-2-9 Automatic answer
(appears only in Car and Headset)
3-1-3 Rename (not available in Normal, Car, or Headset)
3-2 Silent
3-3 Meeting
10
11
3-4 Outdoor
3-5 Pager
4. The Basics
3-6 Car (appears only after phone is connected to a car kit once)
3-7 Headset (appears only after connected to a headset once)
You have purchased a powerful phone, with lots of
features. Read this section for some very basic
information on how to use your phone.
4 Settings
4-1 Call settings
4-1-1 Emergency key 9
A more comprehensive description of your phone is
covered in “Your Phone A to Z” starting on page 17.
4-1-2 Automatic redial
4-1-3 Calling card
Switching the phone on and off
4 2 Phone settings
4-2-1 Clock
Press and hold the
phone on or off.
key for two seconds to switch the
4-2-2 Alarm clock
4-2-3 Touch tones
4-2-4 Restore factory settings
4-2-5 Language
Switching off with the
key
Quickly press the
highlighted) then press OK.
key (Switch off! will appear,
4 3 Security settings
4-3-1 Restrict calls
4-3-2 Access codes
TIPS ON EFFICIENT OPERATION: As with any other radio
transmitting device, do not touch the antenna unnecessarily when
the phone is switched on. Contact with the antenna affects call
quality and may cause the phone to operate at a higher power level
than otherwise needed.
4 4 Network services
4-4-1 Call forwarding *
4-4-2 Call waiting *
4-4-3 Send own caller ID with next call *
4-4-4 Network feature setting
4-4-5 NAM selection
WARNING! Do not switch on the phone when wireless phone use is
prohibited or when it may cause interference or danger.
4-4-6 NAM update (not available in some systems)
* These items will not appear in your phone until they are
activated with Network feature setting. See “Network
feature setting” on page 47 for details.
See “Safety At A Glance” on page 1 for more information.
Getting a strong signal
5 System
Your phone operates on radio waves, and the quality of
radio reception depends on the strength of the radio
signal in your area. This radio coverage is maintained by
a wireless network and the quality of calls on a wireless
phone depends on the strength of the wireless radio
signal.
5-1 Automatic
5-2 SemiAuto A (will not appear in some systems)
5-3 SemiAuto B (will not appear in some systems)
5-4 Home area
6 Games
6-1 Memory
6-2 Snake
6-3 Logic
6-4 Dice
If your phone does not detect service at power up, the
message Searching for service will be displayed. The
phone will continue to search for available service for 15
minutes, at which time it will display No service if none
is found.
7 Calculator
8 Calendar
9 Keyguard
Note: The phone will not work in analog mode while searching for
digital service.
12
13
Checking signal strength
Answering a call
When at the start screen (see page 10) or in a
call, the strength of the radio signal is
indicated by the signal indicators on the left
side of your phone’s display. These indicators
will move up as the strength of the signal
increases and down as it decreases.
Press any key except
or
Note: If Keyguard is on (see
next paragraph), only
answers calls.
Tip: You can stop your phone from ringing without
answering the call. Press
when the phone rings to
Increasing your phone’s signal may be easy. Try moving
your phone slightly, or move towards a window if you’re
calling from inside a building.
mute the ringing.
You can still answer the call if Call or the name of the
person who is calling is still flashing on your display.
If you don't wish to answer the call, it will be forwarded
to your voice mailbox (provided you have a voice mail
subscription).
Making a call
Your cellular phone does not have a dial tone. Simply
enter the phone number (including area code, as needed)
and press
Keyguard
NORMAL POSITION: Hold the phone as you would any other
telephone with the antenna pointed up and over your shoulder.
This feature helps to prevent
accidental key presses (e.g. when
your phone is in your pocket, in your
purse) by disabling your keypad.
Editing a number on display
If you make a mistake while entering a number to dial,
press s to move the cursor to the left and t to move it
to the right. Press Clear to delete the character to the left
of the cursor.
If any keys are pressed while
Keyguard is activated, Press Unlock and then * will
display.
Activating Keyguard
Dialing a phone number stored in the phone book
There are three different ways to activate Keyguard. Keys
View stored names and numbers by pressing t or s from
locked will appear on the display when activated.
the start screen (see page 8), then press
•
Press and hold
(not available during an active call)
until Keys locked appears
Calling card calls
See “Calling card” on page 27.
•
•
Press Menu
Press Menu 9 at the start screen
Emergency calls
Deactivating Keyguard
See “Emergency calls” on page 34.
There are two different ways to deactivate Keyguard.
Ending a call
•
•
Press Unlock, then
Press
Press and hold
press OK
until Unlock keys? appears, then
14
15
Answering a call with Keyguard active
5. Your Phone A to Z
Only the
key will answer the call. After you end the
call, Keyguard automatically becomes active again.
ABC/abc mode
This allows you to enter upper and lower case alphanumeric
characters into your phone. This is necessary for entering
names and numbers into your phone book, as well as
editing any existing alphanumeric characters.
Some notes about Keyguard
•
Calls may be possible to the emergency number programmed
into your phone (e.g. 911 or other official emergency num-
ber). The number is displayed only after you have keyed in its
last digit. Press
) to initiate the call.
See “Entering text and numbers” on page 35 for more information.
•
•
The Emergency key 9 will not work with Keyguard enabled.
You must deactivate Keyguard prior to turning off your
phone.
Access codes
This is a security feature that allows you access to certain
phone features.
•
•
Pressing the
key quickly turns lights on for 15 seconds.
Keyguard is automatically turned off when the phone is con-
nected to a car kit. Keyguard is automatically re-enabled
when removed from a car kit.
See “Lock code” on page 43 and “Security code” on page 62.
Alarm clock
Ending a Call
Press
The alarm clock uses your phone’s
clock and can be set in advance to
sound an alert at a designated time.
Note: To clear any characters from the display, press
again.
You can also turn your phone off
after you’ve set the alarm. Your phone will automatically
wake up and sound the alarm at the specified time.
The volume for the alarm clock is determined by the
current ringing volume.
Note: If you have selected the Silentor Meetingprofile, your alarm
will only beep once. The best profile to use while using the alarm
clock is Normal or Outdoor, unless these have been modified from
their original settings or renamed.
For more information on profiles, see page 55. Also, see “Clock” on
page 30 for information on your phone’s clock.
Setting the alarm clock
1. Press Menu 4-2-2 (Settings - Phone settings -
Alarm clock)
2. Enter time you wish to set alarm (e.g. enter 07:00 to
set the alarm to 7:00; remember if your clock is
24-hour or am/pm). Existing digits will be replaced
with the new alarm time.
16
17
3. Press OK
Note: Step 4 appears only if you have selected am/pm format;
Automatic answer
This is a setting found in your phone’s profile settings,
under the Car and Headset profiles (see page 55). When
this feature is turned on, your phone answers incoming
voice calls after one ring.
see “Selecting time format” on page 31 for more information.
4. Select either am or pm and press OK
When the alarm goes off
Note: Car and Headset profiles will not appear in your phone
until you have connected an approved handsfree car kit or a
headset to your phone at least once.
Press Stop to shut off the alarm.
Snoozing
Activating automatic answer
Press Snooze
1. Press Menu 3 (Profiles)
The alarm will go off again in 10 minutes. If you let the
phone alarm for 1 minute without pressing a key, it stops
alarming for 10 minutes then starts again.
2. Your phone lists each profile. Use t to highlight
either the Car or Headset profile and press Options.
Note: Car and Headset will not appear in the list unless the
phone has already been connected to a car kit or headset.
If you turn off the phone
If you turn off the phone and the alarm is set, the phone
switches itself on at alarm time, then the alarm sounds.
3. Highlight Customize and press OK. Scroll to
Automatic answer, then press Select again.
To shut off the alarm, press any key except Snooze.
The phone displays Keep the phone on? Press Yes
to keep it on or No to switch it off.
4. Press t to On and press OK.
Note: This feature will not function with data calls.
Note: If you do not make a selection after 1 minute, the
phone will automatically shut itself off.
Automatic redial
This feature attempts to redial numbers that are busy due
to the wireless network. It will not redial numbers to a
busy party.
If you press Snooze, the phone turns itself off for 10
minutes, then back on to sound the alarm.
REMEMBER! Do not switch on the phone when wireless phone use
is prohibited, or when it may cause interference or danger.
Your phone will redial the number you’re trying to call up
to 3 times after you hear a quick, busy signal. Press
to stop the call attempts.
Turning the alarm clock off
Press Menu 4-2-2 (Settings - Phone settings - Alarm
clock), then scroll to Off and press OK.
Activating automatic redial
Press Menu 4-1-2 (Settings - Call settings - Automatic
redial), then press t or s to On and press OK
All calls timer
This feature keeps track of the approximate time you
have spent on all calls with your phone.
See “Call timers” on page 25.
18
19
Using the calendar
Calculator
1. Press Menu 8 (Calendar)
Your phone’s calculator adds,
subtracts, multiplies, and divides.
2. If you are not in a digital network, you will be
prompted to set your phone’s time and date
Remember! Your phone must be switched
on to use this feature. Do not switch on
the phone when wireless phone use is
When your phone prompts you for the time with
hh:mm, enter the time in hours and minutes
(using two-digit fields), then press OK
prohibited or when it may cause interference or danger.
Time format (24-hour or am/pm) is set using the Clock.
See “Clock” on page 30.
Using the calculator
1. Press Menu 7 (Calculator)
When your phone prompts you for the date with
mm/dd/yyyy, enter the month and day (using two-
digit fields) and year (using a four-digit field), then
press OK.
2. With the screen that contains a “0”, enter the first
number in the calculation (press # for decimal point)
3. To add, press * (+ appears)
To subtract, press ** (- appears)
To multiply, press *** (* appears)
To divide, press **** ( / appears)
To insert a decimal, press the # key
Tip: Use t to move the cursor right ands to move it left.
When you enter a digit, it writes over the number to the
right of the cursor.
3. Your phone now displays the current day. You can
4. Enter the second number
also scroll to different days by pressing t or s .
Repeat these steps as needed. If you need to erase any
mistakes, press Clear to clear one number at a time.
4. Once you’re at the date you want, press Options.
Then use t to highlight the option you want, and
press Select. The options are:
5. Press Options. With Equals highlighted, press OK
Note: You can also choose Add, Subtract, Multiply, and
Divide from the list of options.
Option 1: View day
With this option, you can view the notes of the day
currently on display.
Calendar
The calendar helps you keep track
of appointments, birthdays or
meetings. It can even sound an
alarm when it’s time for you to
make a call or go to a meeting.
Use t to scroll through the notes. Each note allows you
to choose the following Options:
Erase clears the note from your calendar.
Edit gives you the same prompts you got when you made
the note.
Remember! Your phone must be switched on to use this feature.
Do not switch on the phone when wireless phone use is prohibited
or when it may cause interference or danger.
Move gives you the date prompt so you can move the
note to another date.
Note: Your phone must remain on to use the calendar’s alarm
feature. If your phone is off, the alarm will not sound at its
scheduled time.
20
21
Note: Before you can activate this feature, you should first store
the feature code given to you by your service provider. Otherwise,
this feature may not appear in the menu or function properly.
Option 2: Make note
With this option, you’ll need to choose Reminder, Call,
Meeting, or Birthday. Your phone will prompt you for
more information depending on which one you choose.
You can also set an alarm for any calendar note.
However, you can use the feature code manually, if you choose, by
including the feature code in front of the phone number to which
you wish to forward your calls (e.g. *72 555 1212).
See “Entering text and numbers” on page 35 for help with entering
information at the Subject: prompt.
See “Network feature setting” on page 47 for more details.
Note: If the code you store is not correct, the Call fowarding
feature will not work.
Note: When the alarm goes off, you can press Postpone or OK.
Press OK to shut off the alarm.
1. Press Menu 4-4-1 (Settings - Network services -
Call forwarding)
Option 3: Erase notes
With this option, you’ll need to choose which notes to
erase. If you choose all the notes for the day currently on
display (Of chosen day), or One by one (for all notes in
the calendar), your phone presents each note to you with
the option Erase or Back.
2. Scroll to desired call forwarding feature
(see options below)
3. Press Select
4. Highlight Activate and press OK
5. Enter phone number at Number: (or press Search to
If you choose All at once, your phone will delete all cal-
endar notes. When prompted to confirm the erase, press
Yes or No.
locate number in phone book) and press OK
6. Your phone will attempt to call the network to
confirm the feature code you entered in Menu 4-4-4
(see “Network feature setting” on page 47)
Option 4: View all
This allows you to view the notes of the entire calendar.
Use t or s to scroll through the notes. Calendar
memory empty will appear if there are no notes in the
calendar.
7. Once the feature code had been confirmed, the
feature is activated
Call forwarding options
Forward all calls forwards all incoming calls.
Option 5: Go to date
Enter the date you wish to go to.
Forward if busy forwards calls only when you’re on the
phone.
Option 6: Set the date
Enter the day and month (using two-digit fields) and year
Forward if not answered forwards calls if you don’t
answer.
(using a four-digit field), then press OK.
Forward if out of reach forwards calls if you are out of
the serving wireless network.
Call forwarding
Cancel all call forwarding cancels all call forwarding
options you have made active.
This network service is used to forward incoming calls to
another number so you won’t miss an important call.
Check with your service provider for details.
22
23
Call log
Call settings
This feature automatically keeps
This feature allows you to access and activate some of your
phone’s features.
track of numbers you’ve dialed,
numbers that have called you, and
the amount of time you’ve spent on
calls.
Using call settings
1. Press Menu 4-1 (Settings - Call settings)
2. Press t to reach one of the following options, then press
Using call log
1. Press Menu 2 (Call log)
Select
4-1-1 Emergency key 9 - See page 34.
4-1-2 Automatic redial - See page 19.
4-1-3 Calling card - See page 27.
2. Press t to reach one of the following options, then
press Select or OK
2-1 Missed calls - See page 45.
2-2 Received calls - See page 56.
2-3 Dialed calls - See page 33.
2-4 Clear call lists - See page 29.
2-5 Call timers - See page 25.
Call timers
Your phone automatically keeps track
of the approximate amount of time
you’ve spent in calls.
1. Press Menu 2-5 (Call log - Call
Tip: You can dial any of the phone numbers by pressing
timers)
while the number is on the display.
2. Scroll repeatedly to access the following options
Last call displays call duration of last call.
Call log options
When you access Dialed calls, Received calls, or Missed
calls and press Options, a list of options will appear.
Note: Current call timer can be accessed by pressing Details while
using the Last call timer. See page 32 for details.
All calls displays call duration of all calls made since
timers have last been reset (see page 30 for details on how to
clear call timers).
Call time shows the date and time when the call was first
connected (if clock has been set)
Use number allows you to view the number stored in the
call log, save it in your phone book, or dial the number by
Life timer shows duration of all calls; this can not be
reset (see page 42).
pressing
.
Clear timers clears all call timers except the Life timer
(see page 30).
Save allows you to save the number into your phone book.
Erase will erase the number from the call list.
Call durations are for the currently-selected NAM (phone
number). Your phone has separate timers for each NAM your
phone uses.
Call restrictions
Note: The actual time invoiced for calls by your service provider may
vary, depending upon items such as network features, rounding off for
billing, and taxes.
This feature allows you to restrict incoming and outgoing
calls to and from certain numbers.
See “Restrict calls” on page 57 for details.
See “NAM selection” on page 46 for details on NAM.
24
25
When Caller ID is active, your phone may display the
caller’s phone number. The caller’s name may also display
if their name and number has been stored in the phone
book or if the wireless network supports it.
Call waiting
If you have subscribed to call waiting, your phone will
beep during a call to let you know you have an incoming
call. Your phone may also display the incoming caller’s
identification
Call or Call-caller ID unavailable will display when the
wireless network doesn’t recognize the calling number.
Also, Call-caller ID blocked may display if the calling
party has blocked caller ID.
See “Call forwarding” on page 22 for details on caller ID.
Answering an incoming call with call waiting
Note: If you have stored a number more than once in your phone
book, and that number is stored each time with a different name,
then a name will not appear when someone calls from that
number.
Press
Swapping between two calls
Press
See “Personal Tone” on page 50 for details on your phone book.
Ending the calls
Calling card
Press
to end both calls
If you wish to use a calling card for
long distance calls, you must first
store your calling card information
into your phone. Your phone can
store up to four calling cards.
Activating call waiting
You can also activate this feature with your phone;
simply ask your service provider for the feature code,
store it into your phone, then activate it.
Note: This feature may not appear in your phone’s menu or
function properly until the feature code has been stored.
Storing a calling card
1. Press Menu 4-1-3 (Settings - Call settings - Calling
See “Network feature setting” on page 47 for more details.
card)
1. Press Menu 4-4-2 (Settings - Network services -
2. Press t or s to desired calling card, press Options
3. Press t or s to Edit, press OK
Call waiting)
2. Press t to Activate (or select Cancel to cancel)
4. Enter security code and press OK
3. Press OK
See “Security code” on page 62 for details on your phone’s security
code.
4. Your phone will attempt to call the network to
confirm the feature code you entered in Menu 4-4-4
(see “Network feature setting” on page 47)
5. Press Select at the Dialing sequence prompt. Use
the following chart to determine the dialing
sequence required by your long distance provider.
Then press t or s to select the appropriate
sequence for your card.
5. Once the feature code has been confirmed, the
feature is activated.
Caller ID
Press Select to confirm your choice.
This is a network service that helps identify incoming
calls. Contact your service provider for details.
26
27
3. Press t or s to highlight Select and press OK
4. Enter security code at Security code:, press OK
5. Your phone will display Card ready for use
Select this
dialing
sequence:
If you use a
calling card from:*
You typically are required to:
MCI, AT&T True
Choice, Sprint
Canada, Unitel
Dial 1-800 access number, then Access no.
+ phone no.
+ card no.
phone number, then card num-
ber (+ PIN if required)
Making calling card calls
networkMCI,
WorldPhone MCI
Dial 1-800 access number, then Access no.
Enter the phone number, including any prefix (such as 0
or 1) that your calling card may require when you make a
calling card call. See your calling card for instructions.
+ card no.
card number (+ PIN if required),
then phone number
+ phone no.
GTE, PacBell, AT&T, Dial the prefix (any numbers
Stentor
Prefix
+ phone no.
+ card no.
Press and hold
for a few seconds until your phone
that must precede the phone
number) and phone number
you want to dial, then card
number, (then PIN, if required)
displays Card call.
When you see Wait for tone, then press OK, listen for
the tone, then press OK. When you see Wait for tone,
press OK again, listen for the tone, then press OK.
*These calling cards are frequently used with these dialing sequences.
However, they may vary and are subject to change at the phone
company’s discretion.
Note: This procedure may not apply to all calling card options pro-
grammed into your phone. Please look at the back of your calling
card or contact your long distance company for more information.
Note: The order of the steps to follow may vary, depending on which
dialing sequence your card uses.
6. Enter access number when prompted for the calling
card’s access number (usually the 1-800 number listed
on the back of the calling card), press OK
Change lock code
This feature allows you to change your lock code.
See “Changing your lock code” on page 43.
Note: You can also retrieve the access number from your phone book if
it has already been stored. Simply pressSearch, then t or s to find the
number.
Change security code
7. Enter card number and/or PIN when prompted to enter
calling card number and personal identification number,
then press OK. Press OK again at Save changes?
This feature allows you to change your security code.
See “Changing your security code” on page 62.
8. Press t or s to display Card name and press Select.
Enter card name using your phone’s keypad, then press
OK.
Clear call lists
This feature will clear all dialed numbers, as well as
numbers of answered calls and missed calls. You can not
undo this operation, so be careful.
See “Entering text and numbers” on page 35 if you need help on entering
the card name
Also, see “Call log” on page 24.
Choosing a calling card to use
1. Press Menu 4-1-3 (Settings - Call settings - Calling
1. Press Menu 2-4 (Call log - Clear call lists)
2. Highlight either All, Missed, Received, or Dialed
and press OK (All will clear all call lists, while the
others clear their respective call lists)
card)
2. Press t or s to desired card, press Options
28
29
Selecting time format
Clear timers
If you choose am/pm format, you will notice a small
indicator that appears to the right of the displayed time.
If the indicator is at the top, it’s in am; if on the bottom,
it’s in pm.
This feature clears all call timers (except for the life timer)
for the currently-selected NAM.
See “Call timers” on page 25 for more details.
1. Press Menu 2-5-4 (Call log - Call timers - Clear
1. Press Menu 4-2-1 (Settings -Phone settings -Clock)
2. Press t to Time format and press Select
3. Press t to either 24-hour or am/pm
4. Press OK
timers)
2. Enter security code at Security code: and press OK
Careful: Clearing call timers can not be undone. If you are using the
call timers to log or track the amount of time you are using your
phone, you may wish to record the call timers before you erase them.
Note: The life timer can not be reset. See “Life timer” on page 42 for
details.
If the time is not automatically available because you are
outside of the digital network, or you wish to revert back
to the wireless system’s time, do the following:
Clock
Setting the network clock
1. Press Menu 4-2-1 (Settings -Phone settings -Clock)
You can program your phone’s clock
two different ways: you can either
use the time and date information
that’s provided by the wireless
system, or you can set it yourself
with your own time.
2. Press t to Time settings, press Select
3. Observe the text: Set by network, press Select
again
If you choose Set by network, your phone will display
Time is set.
You can also choose to hide the clock if you prefer.
Note: Your phone also features an alarm clock. See page 17 for
details.
Note: If you use the Set by network option while outside your
digital network, you will be prompted to enter your own time
(see above). Network time will replace the time you set once you
re-enter your digital network.
By default, the date and time is automatically set to your
phone by your wireless system. If you wish to override the
system clock, do the following:
Note: If your battery has been removed or has drained outside the
digital network, you will be prompted to enter your own time only
if the battery is replaced or recharged while still outside of the
digital network (see above).
Setting your own time
1. Press Menu 4-2-1 (Settings -Phone settings -Clock)
2. Press t to Time settings, press Select
Displaying or hiding the clock
1. Press Menu 4-2-1 (Settings -Phone settings -Clock)
3. Press t to Set clock, press Select again
4. Enter the current time, then press OK (time will
2. Press t to either Hide clock or Display clock (only
appear in hh:mm)
one will display depending on the current setting)
5. Enter the current date, then press OK (date will
3. Press Select
appear in mm/dd/yyyy)
30
31
Note: As with all call timers, the actual time invoiced for calls by
your service provider may vary, depending upon items such as
network features, rounding off for billing, and taxes.
Conference call
This feature allows you to add a third party to a call.
Note: This feature may not be available in all wireless systems.
See your service provider for details and availability.
Customize profiles
This feature allows you to customize individual profiles.
Making a conference call
See “Profiles” on page 55 for details.
1. While in a call, enter the second phone number and
press
Data and fax calls
Note: You can also make a third party call using the in-call
menu. While in a call, press Options and scroll to New call.
Enter the number you wish to call and then press OK.
Your phone can function as a fax/modem when
connected to your PC or laptop computer via the optional
data cable. You must also have the appropriate fax or
data software installed and configured to send and
receive data or faxes. (See "Data and Fax Calls" on page 77 for
more information).
2. Once the third party answers, press
to connect
all three parties
3. Press
party. Press
again if you wish to disconnect the third
to drop both parties.
Recalling a number from the phone book during
a conference call
1. During the call, press Options
2. Press t or s to Names and press OK
3. Press Select at Search
Dialed calls
Your phone automatically stores the
last 10 numbers you’ve dialed.
1. Press Menu 2-2 (Call log -
Dialed calls)
4. Enter name and press OK, or just press t or s to
2. Press t or s
scroll through the phone book
3. Press
to dial the number you wish to call
5. Press
You can also access the last 10 dialed numbers if you press
once, then press t or s to scroll through the list.
Current call timer
Also, see “Call log” on page 24 for details on other call lists.
This feature displays the running elapsed time on your
screen while a call is active. Once the call has ended,
simply press any key to clear the display (the display will
also clear automatically after 10 seconds).
Dialed calls options
See “Call log options” on page 24.
Also, see “Call timers” on page 25.
Earpiece volume
Activating the current call timer
You can adjust the listening volume of your phone’s
earpiece by pressing t or s to decrease or increase the
volume.
Press Menu 2-5 (Call log - Call timers) and press Details.
With Current call timer displayed, press Select, scroll to
On, and press OK
See “Volume” on page 74 for details.
32
33
Activating Emergency key 9
Emergency calls
Press Menu 4-1-1 (Settings - Call settings - Emergency
key 9), scroll to On to activate or Off to cancel, then
press OK.
1. If the phone is not on, switch it on
2. Key in the emergency number for your present loca-
tion (e.g. 911 or other official emergency number).
Emergency numbers vary by location.
IMPORTANT!
3. Press
Official emergency numbers vary by location (e.g. 911). Only one
emergency number is programmed into your phone to be dialed
automatically by Emergency key 9, which may not be the proper
number in all circumstances.
IMPORTANT!
This phone, like any cellular phone, operates using radio signals,
cellular and landline networks, as well as user-programmed
functions which can not guarantee connection in all conditions.
Therefore, you should never rely solely upon any cellular phone for
essential communications (e.g., medical emergencies).
Entering text and numbers
You can enter text and/or numbers when storing
information into your phone via your phone’s keypad.
When you see the letter you wish to enter, simply press
the key associated with that letter until it appears on the
display (numbers also appear).
Remember, to make or receive any calls, the phone must be switched
on and in a service area with adequate cellular signal strength.
Emergency calls may not be possible on all cellular phone networks
or when certain network services and/or phone features are in use.
Check with local cellular service providers.
ABC mode
If certain features are in use (keyguard, restrict calls, etc.), you may
first need to turn those features off before you can make an
emergency call. Consult this document and your local cellular
service provider.
When you need to enter letters into your phone, it will
automatically switch over to
mode.
Your phone displays the
icon to indicate that your
When making an emergency call, remember to give all the neces-
sary information as accurately as possible. Remember that your
cellular phone may be the only means of communication at the
scene of an accident - do not cut off the call until given permission
to do so.
phone is in ABC mode. It also displays when you are
viewing names rather than numbers.
When
Key
is displayed, you can enter these characters:
Characters
Key
Characters
.,’?!-1
PQRS7
Emergency key 9
With this feature on, the phone attempts to make an
ABC2
DEF3
GHI4
JKL5
TUV8
emergency call when you press 9, then
. The phone
WXYZ9
dials the emergency number pre-programmed into your
phone.
Enters an empty space, 0
(See below for details)
Note: You can also dial an emergency call by pressing and holding
9 until the phone indicates it is attempting to make an emergency
call. However, this method does not work when Keyguard is active
or when the phone is connected to a modem.
MNO6
Changes letter case;
long press toggles
between ABC/abc and
123 mode
Note: This feature is disabled while playing games, using the
calculator, or while editing (e.g. phone book entries, calendar, etc.).
34
35
While you’re editing a name, the s key will move the
cursor to the left, and t will move it to the right. Press
Clear to correct any mistakes.
Special Characters (for storing & calling numbers)
The following special characters are helpful when you
store numbers to your phone book (see page 50). Simply
press the
key once or repeatedly, and the
If you wish to enter an empty space between characters,
press 0 for each space.
following characters can be stored within the number
sequence.
abc mode (Changing letter case)
Press the # key to switch between upper and lower case
(p) creates a pause when a number is dialed; the
digits located to the right of the “p” are automati-
cally sent as touch tones after a 2.5 second pause
(see page 70).
letters. The
icon will switch to
to indicate
you are using lower case.
(w) creates a “wait” when a number is dialed. The
“w” makes your phone wait for you to press Send or
, then it sends the digits located to the right of
the “w” as touch tones (see page 70).
123 mode
When storing names to the phone book, you can enter a
number within a name at any time. Simply press that
particular number key a few times until it appears, or
press and hold the key for the same result.
You can add as many special characters as you need in a
single number sequence. These characters can not be
However, you can do this more quickly by accessing the
mode, without having to scroll through each letter
to access the number you wish to enter.
entered while in
mode.
Erase all (text messages)
Simply press the # key for about 2 seconds while in
You can erase all read text messages quickly and easily
from the text messages menu (Menu 01-1).
mode and the
only numbers can be entered. Letters can not be entered
unless your phone is in mode.
icon will appear. While in this mode,
See “Erasing all text messages” on page 69 for complete details.
Press the # key again for a couple of seconds if you wish
to deactivate the mode.
Erase options for your phone book
See “Erasing stored names & numbers” and “Erasing your entire
phone book” on page 53.
Special characters (for storing names)
When in
mode (see page 17), you can press the
Fax calls
key and a collection of special characters will
appear. You can use these characters to help when
storing names in your phone book. Simply press t or s
to highlight the one you wish to use and press Insert.
Your phone can function as a fax/modem when
connected to your PC or laptop computer via the optional
data cable. You must also have the appropriate fax
software installed and configured to send and receive
data or faxes. See “Data and Fax Calls” on page 77 for more
information.
. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = [ ] ¥
TIP: If you wish to access a special character that appears
toward the end of this list, press s for quicker access.
Also, you can access the . , ‘ ? ! - characters quickly by
pressing the
key while in
mode.
36
37
To copy a figure from a previously accepted guess row,
start scrolling with the 4 key, move the cursor to the
desired figure in the normal way and accept the selection
with the 5 key.
Games
You have four exciting games to choose from in your phone.
Press Menu 6 to choose one of the following games:
REMEMBER! Your phone must be switched on to use this function.
Do not switch on the phone when wireless phone use is prohibited
or when it may cause interference or danger.
Once you think you have the right combination, press the
* key. The result is presented as a set of marks over the
row. A correct figure in the right place gives a full mark;
a correct figure in the wrong place gives a half mark.
Memory
The game ends when all the figures are correct and in the
right place.
Reveal pictures to find pairs in as few tries as possible.
Move the cursor with the 2 (up), 4 (left), 6 (right), and 8
(down) keys.
Dice
Press the 5 key to reveal pictures. Press the # key to jump
right over revealed pictures or move from bottom right to
top left. Press the * key to jump left over revealed
pictures or move from top left to bottom right. Once
found, pairs stay visible.
Use this to play other games that require a set of dice if
one isn’t available. Use the Level option to set the
number of dice, up to six. You can roll, lock, and unlock
each die as many times as you wish.
When you start a new game, the dice roll for a couple of
seconds and then stop. Use the 4 (left) and 6 (right) keys
to select a die. Press the 5 key to lock or unlock the
selected die.
Snake
Feed the snake with as many goodies as possible and
watch it grow. Use keys 2 (up), 4 (left), 6 (right), and 8
(down) to turn the snake toward food. The snake can only
turn 90 degrees at a time.
Press * to roll the unlocked dice again.
Game options
When you select a game, you can choose from the
following submenus:
The longer the snake’s tail grows, the higher the score.
Using a higher level of difficulty increases the snake’s
speed but also increases the point value for each goodie.
If the snake hits its own tail or the surrounding wall, the
game is over.
Level allows you to choose the level of difficulty, except
for Dice, which selects the number of dice you wish to
play with.
You can also try using keys 1 (up and left), 3 (up and
right), 7 (down and left), and 9 (down and right) to
control the snake’s direction.
New game starts a new game.
Top score will display the selected game’s highest score
ever played with your phone (does not appear in Logic or Dice).
Logic
Find a secret combination of figures. Available figures are
shown at the top of the display before you accept the first
guess row. Use the 2, 4 and 8 keys to move the cursor and
the 5 key to select the figure.
Instructions will describe how the game is played.
Last view may appear in the options list when the game
ends.
Continue may appear in the options list if the game is
interrupted (e.g. an incoming call).
38
39
Note that if you choose the Silent profile, keypad tones
will be turned off.
Inbox
When you receive a text message, it’s stored in the Inbox. Your
phone will display Message received, along with the text
message icon, and you will hear a tone (depending on the message
alert tone; see page 44). Press the Read softkey to read messages.
Setting the keypad tones
1. Press Menu 3 (Profiles)
2. Your phone lists each profile. Use t to highlight the
Please see “Text messages & paging” on page 67 for more details on this
feature.
profile you want and press Options.
3. Highlight Customize and press OK. Press t to
In-call menu
Keypad tones and press Select
While you’re in a call, you may notice thatOptions appears on
your display. Pressing this key will access you to the in-call
menu, which allows you access to certain features while you
have a call active.
4. Press t to scroll through the options; your phone
plays a sample of each. Press OK for the one you
want.
Language
When you access the in-call menu, you may notice the
following choices:
Because many wireless phone
customers speak English as a second
language, your phone allows you to
choose your phone’s displayed
language.
Mute Allows you to mute the microphone; if your microphone
is already muted, Mute will change to End mute (see
“Microphone” on page 45)
Touch tones Allows you to manually enter a touch tone string
or search for one in your phone book (see “Phone book” on
page 51)
Choosing a language for your phone
1. Press Menu 4-2-5 (Settings - Phone settings -
Menu Allows you access to your phone’s menu
Language)
Names Allows you access to your phone book (see “Phone book”
on page 51)
2. Use t or s to select the language you wish to use
and press OK
New call Allows you to place the call to the third party when
making a conference call (see "Conference call" on page 32)
You can choose from English, French, Spanish, Portuguese,
Hebrew, Chinese (simplified), or Chinese (traditional).
Keyguard
Last call timer
This feature disables the keypad to protect against accidental
keypresses.
This feature displays the duration of your last call.
See “Call timers” on page 25.
See “Keyguard” on page 15 for more details.
Last number redial
Keypad tones
When you want to call your last dialed number,
This is one of the settings in your phone’s profiles (see page 55).
It sets the volume of the tone you hear when you press your
phone’s keys.
Press
, then
again
Note: You must be at the start screen before you press
40
41
Letter case
Listen to voice messages
You can change from upper to lower case when entering
letters into your phone.
This feature allows you to access your voice messages.
See “Voice messages” on page 73 for complete details.
See “abc mode (Changing letter case)” on page 36 for more details.
Lock code
Life timer
You’ll need the lock code to activate and deactivate
Phone Lock (see page 53), or to change your lock code. The
default lock code is 1234. If you enter an incorrect lock
code five times in a row, your phone will prompt you for
the security code (see page 62).
The life timer displays the approximate total time of all
calls dialed and received with your phone (in hours and
minutes only). The life timer can not be reset and is used
in conjunction with your phone’s warranty.
Press Menu 2-5-3 (Call log - Call timers - Life timer) to
view your phone’s life timer.
Changing your lock code
In a lock code, only numeric characters are accepted.
Note: The actual time invoiced for calls by your service provider
may vary, depending upon items such as network features,
rounding off for billing, and taxes.
1. Enter Menu 4-3-2-3 (Settings - Security settings -
Access codes - Change lock code)
Also, see “Call timers” on page 25.
2. Enter lock code at Enter lock code: and press OK
3. Enter new lock code, press OK
Lights
4. Verify new lock code, press OK
This is one of the settings in your phone’s Car profile (see
page 55). This feature determines whether the lights are
on only when you use your phone, or if they are on at all
times. This setting works only when your phone is
connected to a car kit.
Note: When you change your lock code, make sure you store it in a
safe place, away from your phone. Avoid entering access codes
similar to emergency numbers to prevent accidental emergency
calls.
1. Press Menu 3 (Profiles)
Manual touch tones
2. Your phone lists each profile. Use t to highlight the
This setting determines how long touch tones are
produced as you press the keys on the keypad. Note that
touch tones are sometimes called DTMF tones.
profile you want and press Options.
Note: Car will not appear in the list until the phone has been
connected to a car kit at least one time.
See “Touch tone length” on page 70 for details.
3. Highlight Customize and press OK. Press t to
highlight Lights and press Select.
Setting manual touch tones
4. Use t to scroll through your choices and press OK
Press Menu 4-2-3-1 (Settings - Phone settings - Touch
tones - Manual touch tones) and highlight one of the
following options, then press OK.
If you select Automatic, your phone’s lights are turned
off within fifteen seconds if no keys are pressed. If On is
selected, then the lights will remain on the entire time
your phone is connected to the car kit.
Continuous means the tone sounds for as long as
you press and hold the key.
42
43
Fixed sets the tone length to .1 second, regardless
4. Use t to scroll through your choices (your phone
of how long you press the key.
plays samples) and press OK.
Off turns the tones off, and no tones will be sent
when you press the keys.
Microphone
You can mute and unmute your phone’s microphone
while a call is in progress. During a call, your phone’s
softkeys change from Names and Menu to Options and
Mute.
Memory status
This feature allows you to see how many free and in-use
memory locations are in your directory.
Also, see “Phone book” on page 51.
Muting and unmuting your phone
Press Names, scroll to Options and press Select. Then
scroll to Memory status and press Select again.
You can mute the phone’s microphone during a call;
simply press Mute. To unmute the microphone, press
Unmute.
Messages
If these texts are not available, press Options, scroll to
Mute or End mute and press Select.
This feature allows you to access your voice and text
messages, as well as composing your own welcome note.
Muting and unmuting also affect the microphones of any
accessories connected to the phone.
Using messages
1. Press Menu 01 (Messages)
Missed calls
2. Press t to reach one of the following options, then
If Caller ID is available, your phone will keep track of the
last 10 calls you have missed if you weren’t around to
answer the call. You can even find out what time they
called.
press Select
1-1 Text messages - See page 67.
1-2 Voice messages - See page 73.
1-3 Welcome note - See page 76.
Missed calls will appear in your phone only if it was
turned on and in a service area when the call was missed.
Message alert tone
If the display says ‘Missed call’
This is one of the settings in your phone’s profiles (see
page 55). It sets the tone that your phone makes when you
get a text message.
Press List. To call back the displayed number, press
Press Exit to go back to the start screen.
.
Missed call options
Also, see “Text messages & paging” on page 67.
See “Call log options” on page 24.
1. Press Menu 3 (Profiles)
2. Your phone lists each profile. Use t to highlight the
Checking the missed calls list anytime
profile you want and press Options.
Press Menu 2-1 (Call log - Missed calls), then scroll
through the list.
3. Highlight Customize and press OK. Press t to high-
light Message alert tone, then press Select.
44
45
provider.
When the Forward if not answered option in the Call
Forwarding feature (see page 22) is selected, your phone will
not treat the forwarded calls as missed calls.
In some cases, when you try to connect to your service
provider, the following message may appear on the
display before the call is initiated.
Also, see “Call log” on page 24 for details on other call lists.
'Lock' prevents the service provider from changing
the lock code. 'Unlock' allows the provider to
change the code and restrict others from
activating the phone.
NAM selection
The Number Assignment Module (NAM) is the phone’s storage
location containing the assigned phone number(s) and other
system information. This information is entered by your
service provider when programming your phone when your
phone is first activated.
If this happens, select the appropriate selection for your
phone. If you don’t want your service provider to change
your lock code, select Lock. If you want to allow your
service provider to change your code to prevent other
service providers from activating your phone, press Unlock.
In most systems, your phone can be activated in up to 2
different service areas (e.g. one in Dallas and another in
Chicago), each giving your phone a different phone number or
account.
If you wish to do neither and want to return to the start
screen, press and hold
.
Only one number can be active at a time. When you select a
phone number, you’re also selecting which system you’re
using as your home system (see “System Selection” on page 64).
The first phone number displayed with this menu is the
currently selected number.
Note: This feature may not be available in all systems. Please con-
tact your service provider for details about the availability of this
feature.
Network feature setting
Note: It may not be necessary to have two NAMs for your phone if your
service provider has service or roaming agreements for each area in
which you wish to use your phone. Contact your service provider for
details.
Call forwarding (page 22), Call waiting (page 26) and Send
own caller ID with next call (page 63) are network services
available through your service provider or dealer.
When you subscribe to any of these services, your service
provider or dealer gives you a separate feature code to
activate each service. Deactivation codes are used to
deactivate each service.
Selecting the NAM for your phone
1. Press Menu 4-4-5 (Settings - Network services - NAM
selection),
Once you store the appropriate code in your phone, the
service appears as a menu item. You can then use the
menu to activate and deactivate these services.
2. Use t or s to select the phone number you want to use
and press OK.
Note: You need at least one active number to make calls. You can not
change from one NAM to another during a call.
Note: These feature codes may already be stored in your phone by
your service provider. Check with your service provider to confirm
if these codes are already configured in your phone.
NAM update
Note: If your phone has more than one phone number
programmed, any feature codes stored will apply only to your
primary phone number, or NAM 1.
The Number Assignment Module (NAM) update feature may
appear in your phone. It allows you to easily activate or
reactivate your phone without having to go to your service
46
47
Storing feature codes
dial location using your phone’s keys 2 through 8.
1. Press Menu 4-4-4 (Settings - Network services -
Note: Keys 1 and 9 are used exclusively for dialing your voice mailbox
(see page 73) and for attempting emergency calls (see page 88) to the
emergency number programmed into your phone (e.g. 911 or other offi-
cial emergency number). Press and hold either of these keys to initiate
the appropriate call.
Network feature setting)
2. At Feature code:, enter the feature code or deacti-
vation code received from your dealer (e.g. *74,
*740, etc.), press OK
Assigning one-touch dial locations
1. Press Names, scroll to 1-touch dialing and press Select
3.
t
to the service that the code applies to and press
Select
4.
t
to suboption, then Select (Repeat step as
2. Scroll to next available empty location, (empty) will
required, based on number of suboptions)
appear, then press Assign
(Use step four only for call forwarding options)
3. Scroll to select desired name and press Select
5.
t
to Activate or Cancel, then press OK
4. Repeat as necessary
Network services
Calling a number using one-touch dialing
Press and hold the key (2 through 8) for a few seconds to call
the number in the corresponding one-touch dial location. You
Some of the features in this menu are network services
that require a subscription. See your service provider for
details and availability.
can also press the key and then
if you prefer.
4-4-1 Call forwarding * - See page 22.
Your phone recalls the phone number from the memory,
displays it briefly, then dials it.
4-4-2 Call waiting * - See page 26.
4-4-3 Send own caller ID with next call * -
See page 63.
Changing numbers in one-touch dial list
With this feature, you can assign a different number to any
one-touch dial location.
4-4-4 Network feature setting - See page 47.
4-4-5 NAM selection - See page 46.
4-4-6 NAM update - See page 46.
1. Press Names, scroll to 1-touch dialing and press Select
2. Scroll to the location you wish to change and press
* These features will not appear in the menu unless they are acti-
vated using Network feature setting. See “Network feature
setting” on page 47 for details.
Options
3. Scroll to Change, then press Select
4. Scroll through phone book to select new number and
press Select
One-touch dialing
This feature allows you to make phone calls quickly and
easily with the touch of a button.
Erasing one-touch dial locations
1. Press Names, scroll to 1-touch dialing and press Select
You must store names and numbers in your phone book
(see page 52) before you can use this feature. Then you
can assign a name from the phone book to a one-touch
2. Scroll to the location you wish to erase and press
Options
48
49
3. Scroll to Erase, press Select, then press OK at
3. Scroll to Personal tones, then press Select
Erase?
4. Scroll to Default and press OK
Paging
Phone book
You can receive pages with your phone.
You can store up to 200 numbers and associated names
in your phone’s memory. These numbers are right at your
fingertips for easy dialing.
See “Text messages & paging” on page 67.
Personal Tone
Things to know about the phone book:
This feature allows you to assign special ringing tones to
phone numbers already stored in your phone book. So
when your phone rings, you’ll be able to quickly identify
who’s calling.
Stored numbers may be up to 32 digits long.
Stored names may be up to 16 characters long.
You can not store identical names into your phone
(e.g., John, John); make sure you use unique names
in your phone book (e.g., John H., John W.). If you
try to use a name that already exists, Replace? will
be displayed, followed by the currently stored name.
Press OK to replace the existing entry or Back to
return to the previous screen.
Your phone will also display an icon to identify that this
person is in the personal tones list. You can assign as
many as 20 names & numbers to the list.
Keep in mind that caller ID must be available and active
in your phone in order to use this feature.
Note: If you have selected the Silent profile, your phone will not
ring when someone in your personal tone list calls.
Accessing the phone book
Press Names, scroll to desired submenu and press Select.
Assigning a personal ringing tone to a name &
number
About the submenus
The phone book has several submenus from which you
can choose.
1. In your phone book, locate the person you wish to
add to the personal tone list.
2. With that person’s name or number highlighted,
Search allows you to search for a specific name.
Add new allows you to enter new names and numbers.
Edit lets you edit the current phone book entry.
press Details and then Options
3. Scroll to Personal tones, then press Select
4. Scroll through the list of ringing tones that are dis-
played and press OK when you make your choice
Options lets you choose your scrolling view, as well as to
show memory status.
Removing a name & number from the list
1-touch dialing allows you to assign up to seven one-
1. In your phone book, locate the person you wish to
touch dial locations (see page 48 for details).
remove to the personal tones list
Erase all lets you erase every name and number in your
phone book. You can erase one name and number at a
time by pressing Details, then Options when viewing a
2. With that person’s name or number highlighted,
press Details and then Options
50
51
name already in the phone book.
Recalling numbers by name
Own Number displays your own phone number.
At the start screen, press Names (or just press t or s ).
Then press the number on the keypad with the
corresponding first letter of the name you wish to call.
Keep pressing to get to the next letter on that key.
Storing a name & number
1. Press Names
You can also recall numbers by name by pressing Names,
then press Select at Search. Enter the name of the
person you wish to recall and press OK.
2. Scroll to Add new and press
Select
3. Enter name using the keypad
(use # to switch between
Note: If you only entered the first letter of the name and there are
several names beginning with the same letter, press t or s until
the desired name appears.
upper and lower case) and press OK
You can also press the
key to insert any special
Erasing stored names & numbers
1. Recall stored name
characters (see page 36 for a list of special characters)
4. Enter phone number and press OK
2. Press Details, then press Options
3. Highlight Erase, then press Select, then OK
Note: You can not undo Erase functions, so be careful!
Also, see “Entering text and numbers” on page 35 and “Quick save”
on page 64.
Changing a number stored with a name
1. Recall stored name, then press Details to view
Erasing your entire phone book
1. Press Names
number
2. Press Options, scroll to Edit and press Select
2. Scroll to Erase all and press Select
3. Press OK at Are you sure?
4. Enter security code at Security code:
5. Press OK
3. Press OK while name is displayed, unless you wish to
change it. If so, press and hold Clear, re-enter name
and press OK
4. Press and hold Clear to erase number or use the t
and s keys to edit
Warning: This feature will erase your entire phone book, which can
not be undone!
5. Enter new number
6. Press OK to save new number
Phone lock
Recalling names & numbers
This feature protects your phone from unauthorized
outgoing calls or unauthorized access to information
stored in the phone.
At the start screen, press t or s to view names in
directory. Then scroll to the person you wish to call and
press
dialed to confirm).
to dial the number (phone will display number
With phone lock activated, Phone locked will be
displayed each time you turn your phone on or off. You
will be prompted for your lock code when you press either
52
53
Names or Menu (Call not allowed will be displayed if
you attempt to place a call while phone is locked). Once
your lock code has been accepted, your phone will
function normally.
Profiles
You can adjust and customize your
phone to whatever environment you
find yourself in (e.g. shopping, a
movie, etc.). Each profile uses its
predefined settings to determine
Activating and deactivating phone lock
Press Menu 4-3-2-1 (Settings - Security settings -
Access codes - Phone lock). Enter the lock code then
press OK. Then scroll to On or Off, and press OK.
Complete the phone lock activation or deactivation by
turning your phone off and back on.
your phone’s ringing volume, ringing tone, message alert
tone, keypad tones, warning tones, etc., for a number of
different environments.
These settings can be changed at any time, and each
profile can be selected in a matter of seconds.
When your phone is locked, calls may be possible to the
emergency number programmed into your phone (e.g.
911 or other official emergency number) including calls
with Emergency key 9 (page 34).
Note: Restore factory settings (see page 57) will reset any changes
made in profiles back to the factory defaults. The default setting is
Normal.
You can also store a number in the Unlocked phone
number location, which allows you to call this number
even though your phone is locked (See page 72 for details).
Accessing profiles
Press Menu 3
Selecting a profile
Quickly press the
profiles. Then press t or s to choose another profile and
Answering a call with phone lock on
key to view a list of the available
Press any key except
and
press OK.
Phone settings
When you select a profile other than Normal, it will
appear on the start screen.
Phone settings allows you access to other phone features
such as an alarm clock and your phone’s language.
This only allows you to select a profile; you can not
customize them here. Keep reading to learn how to
customize a profile.
Using phone settings
Press Menu 4-2 (Settings - Phone settings), then scroll
to one of the following options, then press Select:
Customizing profiles and other options
4-2-1 Clock - See page 30.
Press Menu 3 (Profiles) and scroll to desired profile, then
4-2-2 Alarm clock - See page 47.
4-2-3 Touch tones - See page 70.
4-2-4 Restore factory settings - See page 57.
4-2-5 Language - See page 41.
press Options.
Once Options is selected,Select, Customize andRename
may appear as your choices. Once you have selected and
highlighted one of these items, press OK. If you wish to
go back to the main menu, press Back.
Select activates the profile.
54
55
Customize allows you to customize a profile by
changing its settings. When you reach one of the
following settings within a profile, press Select.
Once you make your choice within that setting,
press OK.
Received calls options
See “Call log options” on page 24.
Restore factory settings
You can reset the settings of many of your phone’s
features to factory defaults (as in a new phone).
• Ringing options
• Ringing volume
• Ringing tone
Restoring factory settings
Press Menu 4-2-4 (Settings - Phone settings - Restore
factory settings), enter security code and press OK.
• Vibrating alert
• Keypad tones
Note: Your phone book, timers, language selection, security code
and lock codes are not reset. However, any profiles you have mod-
ified will reset when you restore your settings. Plus, if you are using
your phone’s clock [versus using the network provided clock] it will
reset as well.
• Warning and game tones
• Message alert tone
•
•
Lights (appears only in Car)
Automatic answer (appears only in Car and Headset)
Rename allows you to rename certain profiles.
Renaming profiles
Note: Car and Headset will not appear in the profiles list unless
your phone has been connected to a car kit or a headset. However,
they will remain in the menu once connected for the first time.
See “Profiles” on page 55.
Restrict calls
Note: When you change a setting in any profile, it only affects that
profile and will not change your phone’s normal settings.
This feature allows you to restrict incoming and outgoing
calls. Outgoing and incoming calls are restricted from a
list of restrictions that you create yourself.
Renaming profiles
1. Press Menu 3 (Profiles)
Restricting incoming & outgoing calls
2. Scroll to desired profile, then press Options
3. Scroll to Rename and press OK
4. Enter new name and press OK again
Note: Normal, Car, and Headset profiles can not be renamed.
Upon selecting Restrict outgoing calls or Restrict
incoming calls from the menu, you are presented with 2
options:
Select allows you to select call restrictions from the
outgoing calls list.
Received calls
Add restriction allows you to create your own list of
outgoing call restrictions.
If Caller ID is available, this feature shows you the phone
numbers of the 10 most recent calls you’ve answered.
Once you have accessed Add restriction and have added
at least one restriction, the following options will be
added to the menu for that option:
Press Menu 2-2 (Call log - Received calls), then t
to scroll the numbers.
Edit allows you to edit an existing outgoing call restriction.
Also, see “Call log” on page 24 for details on other call lists.
56
57
Erase will erase any existing outgoing call restrictions.
Selecting call restrictions
1. Press Menu 4-3-1 (Settings - Security settings -
Note: When calls are restricted, calls may be possible to the
emergency number programmed into your phone (e.g. 911 or other
official emergency numbers). However, Emergency key 9 may not
operate depending on the type of restriction you choose.
Restrict calls)
2. Scroll to Restrict outgoing calls or Restrict
incoming calls and press Select
3. Enter the security code and press OK
Adding outgoing & incoming call restrictions
You can add up to 10 restrictions for outgoing calls, and
15 for incoming calls. The maximum number of
characters you can enter for each restriction is 15.
4. Scroll to Select and press OK
5. Scroll to each restriction you wish to use and press
Mark; press Unmark to deactivate existing restrictions
1. Press Menu 4-3-1 (Settings - Security settings -
6. Press Back and then press Yes at Save changes?
Restrict calls)
2. Scroll to Restrict outgoing calls or Restrict
Editing call restrictions
1. Press Menu 4-3-1 (Settings - Security settings -
incoming calls and press Select
Restrict calls)
3. Enter the security code and press OK
2. Scroll to Restrict outgoing calls or Restrict
Note: The message “Caller ID must be available” will display
prior to creating an incoming call restriction.
incoming calls and press Select
4. Press t or s to Add restriction to create an
3. Enter the security code and press OK
4. Scroll to Edit and press OK
outgoing or incoming call restriction and press OK
5. Enter the number string you wish to restrict and
5. Scroll to the restriction you wish to edit, press OK
press OK, for example:
Note: If no name has been entered for a restriction, the
restricted number will be displayed.
If you wish to restrict all calls that begin with 1,
enter 1
6. Press and hold Clear to erase entire number, then
enter the new characters. Or use t or s to move the
cursor to the desired location and delete a character
or insert additional characters. Press OK when
finished.
If you wish to restrict all calls that begin with 1972,
enter 1972
If you wish to restrict all calls that begin with 214,
enter 214
7. Edit name if desired using same procedure as above
6. If you wish to enter a name for the call restriction,
enter the name using your phone’s keypad, then
press OK. If a name is not entered, the number that
is restricted will appear in place of the name.
Erasing call restrictions
1. Press Menu 4-3-1 (Settings - Security settings -
Restrict calls)
Note: When creating a new restriction, that restriction is
automatically selected (enabled) at the time it is saved.
2. Scroll to Restrict outgoing calls or Restrict
incoming calls and press Select
3. Enter the security code and press OK
58
59
4. Scroll to Erase and press OK
2. Your phone lists each profile. Use t to highlight the
profile you want and press Options.
5. Scroll to the restriction you wish to erase, press OK
6. Press OK again to erase restriction
3. Highlight Customize and press OK. Press t to
Ringing tone, then press Select.
Note: The All calls option cannot be erased and therefore does not
appear in the list of restrictions to be deleted.
4. Press t to scroll through the options. After you hear
the tone you wish to use, press OK.
Ringing options
Ringing volume
This is one of the settings in your phone’s profiles (see
page 55). It allows you to choose whether or not your
phone rings, beeps, or remains silent when someone calls
you. This feature does not affect incoming text message
alert tones (see page 67).
This feature, which is found within your phone’s profile
settings, allows you to adjust your phone’s ringing
volume.
See “Volume” on page 74 for details.
Selecting ringing options
1. Press Menu 3 (Profiles)
Saved
This is where saved text messages are stored.
2. Your phone lists each profile. Use t to highlight the
See “Text messages & paging” on page 67 for details.
profile you want and press Options.
3. Highlight Customize and press OK. Press t to
Scrolling view
Ringing options, then press Select.
You have three different options on how you can view the
phone book. Your choices are:
4. Highlight either Ring, Ascending, Ring once, Beep
once or Silent and press OK
Name list shows all stored names in a scrolling list. Three
names will appear at any given time. To view other names
in the directory, scroll back and forth through the list
using t or s . Name list is the default setting.
Note: The Ascending ringing option plays the selected ringing tone
at a low volume, then gradually increases in intensity with each
ring.
Name+number displays individual names and numbers
stored in your directory. Only one name will display on
your screen at a time, with the corresponding phone
number. Use t or s to view other names.
Ringing tone
This is one of the settings in your phone’s profiles (see
page 55). It allows you to choose one of the many ringing
tones your phone uses for incoming voice calls.
Name only shows individual names only on a full screen
display. To view other names, use t or s . You can view
the corresponding phone number by pressing Details,
then t or s .
If you set Ringing Options (see page 59) to Silent or Beep
once, ringing tones are automatically disabled; however,
incoming calls can still be received.
Selecting ringing tones
Selecting your scrolling view
1. Press Menu 3 (Profiles)
1. Press Names
60
61
press OK (must be five digits)
2. Scroll to Options, then press Select
4. Enter new security code again at Verify new
3. Press Select at Scrolling view
security code:, press OK
4. Press t or s to select either Name list, Name+number,
5. Phone will display Security code changed
or Name only, then press OK
Note: If you have changed your security code and don’t remember
the new code, contact your service provider. Once you have
changed your security code, the default setting is no longer valid.
Security settings
This menu includes the following security features:
4-3-1 Restrict calls - See page 57.
4-3-2 Access codes - See page 17.
Send own caller ID with next call
In most service areas, when you call someone your name
will be presented to his/her caller ID (if they subscribe).
This feature allows you to block their caller ID (your
number will not be displayed) when you call them. This
feature works on a per-call basis. Contact your service
provider for more details.
The Access codes submenu includes Phone lock (page 53),
Unlocked phone number (page 72), Change lock code
(page 43), and Change security code (page 62).
Security code
Please be aware of the following:
Your phone will prompt you for a five digit security code for
certain features. These features can be used only after the
correct security code has been successfully entered.
•
This feature is only effective when calling to a number that
is equipped with Caller ID.
•
This feature is available only when supported by the
wireless network, and may not function if you are roaming.
Note: When entering your security code, ***** will appear on the display
to keep others from viewing your code.
Note: Before you can activate this feature, you should first store
the feature code given to you by your service provider. Otherwise,
this feature may not appear in the menu or function properly.
Check with your service provider to confirm if the feature code has
been pre-programmed for you. See “Network feature setting” on
page 47 for more details.
If you make a mistake entering the code, erase the last entered
digit by pressing Clear (or press and hold Clear to delete all
the digits on your display). Then enter the correct code or press
Back to exit the current feature.
If you enter an incorrect security code (Code error will appear)
five times in a row, your phone won’t accept any entries for
the next five minutes.
1. Press Menu 4-4-3 (Settings - Network services -
Send own caller ID with next call)
2.
t
to Yes (to show your number) or No (to not show
Your phone’s default security code is 12345. It’s highly
recommended that you change this code at once, write it down,
and store it in a safe place away from your phone.
it) and press OK
3. Enter the number you wish to call (or press Search
to retrieve the number from the phone book and
press OK), then press OK
Changing your security code
4. Your phone will attempt to call this number with the
feature code you stored in Menu 4-4-4 (see “Network
feature setting” on page 47)
1. Press Menu 4-3-2-4 (Settings - Security settings -
Access codes - Change security code)
2. Enter security code and press OK
3. Enter new security code at Enter new security code:,
62
63
primary or “home” system. How your phone will handle
being out of your home area can significantly affect the
types and amounts of additional charges you may incur.
Settings
This main menu allows you access to other features.
See these individual entries for more information.
4-1 Call settings - See page 24.
Service Types
4-2 Phone settings - See page 54.
In each wireless service area there are usually two service
providers, referred to as type A and type B.
4-3 Security settings - See page 62.
4-4 Network services - See page 48.
When you first set up your wireless service account, your
service provider will inform you of which system you will
be using (e.g. type A). This is your home system. The other
system (e.g. type B) is known as a non home-type system.
Storing a name & number
You can save names and numbers in the Phone book.
Either use the method described in “Storing a name &
number” on page 52 or the “quick save” method
described below.
Roaming
Roaming is a term used to indicate that your phone is not
in its home area. When you place or receive calls while
roaming, you are actually using another service provider’s
system to complete your call. Therefore, calls made or
received while roaming are usually more expensive than
calls made in your home area.
Quick save
Enter the phone number and press Save. Enter a name at
Name: if you wish (optional), then press OK.
Note: To save the number without entering a name, press and hold
Save for 2 seconds. The number will appear at the end of your
phone book list.
Roaming indicators
When your phone begins roaming, it displays Roaming. If
roaming in a non-preferred system, your phone will also
display Roaming and a D will appear at the top of the
display.
Also, see “Entering text and numbers” on page 35.
Synchronization
Your phone supports synchronization of its phone book
with many popular Personal Information Manager (PIM)
programs (e.g. Lotus Organizer, Microsoft Outlook,
Symantic ACT!) by using 3rd party software.
System choices
Your phone will automatically attempt calls using a
preferred system. If your phone fails to find a preferred
system, then it will use the selection you have chosen
with this feature.
Synchronization of contacts and phone numbers between
your phone and PC will also require the optional DAU-9P
serial cable. Check with your local Nokia dealer for the
availability of these products.
Note: Before making modifications to your system selection setup,
contact your service provider to ascertain how these changes may
affect your phone bill.
Automatic means your phone will attempt calls to a
hometype system before trying to use a non home-type
system.
System Selection
The System menu (Menu-5) allows you to modify how
your phone will work when you are outside of your
64
65
SemiAuto A means your phone will attempt calls to
system A unless a home or preferred system is available.
roaming charges. Check with your service provider to
maximize use of this feature.
Note: This text may not appear in some systems.
In non-preferred systems, normal roaming charges are
determined by the host system. Your phone is designed to
select a system most favorable to you concerning the cost
of the call and reception quality.
SemiAuto B means your phone will attempt calls to
system B unless a home or preferred system is available.
Note: This text may not appear in some systems.
Note: When roaming in some systems, you may need to have a
roaming agreement in order to place a call. If no roaming
agreement has been arranged, a network operator may interrupt
and request information on how you intend to pay for the call.
Home area means your phone cannot roam at all. Your
phone will display No Service when you travel outside of
your home area.
If you have more than one phone number
Custom menu
The currently-selected NAM in your phone determines
which system is your current home system.
Depending on your service provider, the options displayed
for the System menu may include the following:
See “NAM selection” on page 46 for more details.
Automatic means your phone will attempt calls to a
hometype system before trying to use a non home-type
system.
Text messages & paging
When you subscribe to the text messaging network
service, you can receive text messages and pages with
your phone. See your service provider for details and
availability.
[Service Provider’s Name] means your phone will
attempt calls via your service provider’s system only. If
your service provider’s system is unavailable, your phone
will display No service.
Analog means your phone will attempt to place a call
using an available analog system.
Text message options
Inbox is where incoming messages are received and
stored. All new, unread messages are kept here.
Which system should you choose?
Saved is where all saved, read messages are kept here.
By default, your phone is set to automatically search for
the most cost-effective system when you are outside of
your home area. For example, if your home system is type
A and you are roaming, your phone will automatically try
to use the local hometype system (the type A system in
your current location). The type B system would be a non
home-type system.
Erase all allows you to erase all text messages. However,
unread text messages will not be erased.
Receiving text messages
The maximum length of a received text message is about
250 characters. Your phone has space to receive up to 30
text messages, depending on the length of each one.
However, in an area where no home or preferred systems
are available, use this menu to manually choose which
system your phone uses.
Note: Text messages that you receive with your phone may appear
different at times, due to messages that originate in networks
other than your own. This does not affect the use of your phone in
any way.
By setting your phone to use a home-type or a preferred
system, it’s possible for you to receive discounted
66
67
Also, the maximum length of a text message may depend on the
network’s capabilities. See your service provider for additional text
messaging information.
Erasing a text message
1. With the message on the display, press Options
2. Scroll to Erase and press OK
When you receive a text message
Text messages are shown in the order that they were
received, in their order of priority.
3. Press OK again at Erase message?
Erasing all text messages
New emergency message indicates that the message or
page received was sent by someone via the service
provider. Emergency messages are sent only in situations
where life and/or property are in immediate danger.
Emergency messages are listed first and will override all
other messages.
1. Press Menu 01-1-5 (Messages - Text messages -
Erase all)
2. Scroll to the desired option:
All messages will erase all messages that have been
read from both the Inbox and Saved folder.
Urgent messages are also high priority messages,
although emergency messages have higher priority.
Inbox will erase only those messages in your Inbox
that have been read.
Message received indicates the existence of an unread
message or page. If more than one message exists, the
number of received messages will be displayed, followed
by the messages or pages in the order they were received.
Saved will erase messages in the Saved folder.
3. Enter your security code and press OK
Receiving a page
Your phone will display Message received. The message
will display Call:, followed by the name or number of the
person who paged you. Names will appear only if that
person has been stored in the phone book.
Reading text messages
With Message received displayed,
1. Press Read and scroll to new message
2. Press Read again
Calling someone back
The message along with the phone number must be
visible on your phone’s screen. While the text message is
displayed,
Reading options
Press Options while a text message is displayed to access
the following reading options.
1. Press Options
Erase will erase the message.
2. Select Use number, then press OK
Save will save the message to the Saved folder.
Use number captures the telephone number displayed in
the incoming text message, permitting you to either save
the number in your phone book (see “Phone book” on
page 51), or place a call to the number (see “Calling someone
back” on page 69).
To quickly call back a number in a message
Press
while the message (including the phone
number) is displayed. After the number has been dis-
played on the screen for 3 seconds, the call will be
placed.
68
69
Note: If more than one number is on the display, the numbers are
displayed in a list. Simply select the phone number you want to call
You can store a whole digit sequence in your phone book
and send it as touch tones for frequently-used strings of
numbers.
and press
. If no numbers are found, your phone will display
No number found.
Sending a touch tone string
When your phone’s memory is full
Make sure Menu 4-2-3-1 (Settings - Phone settings -
Touch tones - Manual touch tones) is not set to Off.
During a call,
When you have an incoming text message and your
phone’s memory is full, one or more messages, of lowest
priority, will automatically be deleted in order to receive
the new text message.
1. Press Options
If the message memory is still full, your phone will display
No space: read messages. You can clear this notification
by pressing OK.
2. Scroll to Touch tones and press OK
3. Enter touch tone string or recall string from the
phone book and press OK
Note: Messages are usually deleted from your Inbox. An incoming
emergency message may delete messages from your Saved folder.
Note: Use caution when sending confidential information over the
air when using DTMF tones in analog mode.
Touch tone length
Storing touch tone strings with phone numbers
1. Enter the phone number (e.g. your office voice
This feature determines the length of each touch tone
when they are sent automatically.
mailbox)
2. Press *** (p) or **** (w)
Short sets the tone length to .1 second. Long sets the
tone length to .5 second.
3. Enter the touch tone string (e.g. voice mailbox
password)
You can set the touch tone length by pressing Menu
4 2 3 2 (Settings - Phone settings - Touch tones - Touch
tone length).
4. Store the number as you normally would
Note: See “Special Characters (for storing & calling numbers)” on
page 37 for details on “p” and “w” characters.
Touch tones
When you dial this number, your phone first dials the
phone number, then waits (because of the “w” character)
for you to press Send. Your phone then sends your
password.
Your phone can generate various sounds, called touch
tones, when the keys are pressed. These are also known
as DTMF tones.
Touch tones can be used for many automated, over-the-
phone services such as checking bank balances, airline
arrival and departure times, and using voice mailbox
options. Touch tones can be sent only when a call is active.
If you include a “p” character instead of a “w”, your phone
pauses for 2.5 seconds, then automatically sends your
password as touch tones.
Linking phone numbers with touch tone strings
Storing touch tone strings
This feature allows you to store a phone number in one
phone book location and link it to another phone book
location that contains a touch tone string.
Store touch tone strings the same way you store phone
numbers (see page 52).
70
71
First, you must store the touch tone string into a phone
book location and then assign it a one-touch dialing
location (see “One-touch dialing” on page 48).
At the start screen, press t or s once, then
can manually enter the phone number as it is stored and
press
or you
.
1. Enter the phone number you wish to link with the
touch tone string.
Vibrating alert
2. Press * twice (you should have a + character next to
This is one of the settings in your phone’s profiles (see page 55).
Your phone has an internal vibrating feature, so you can set
your phone to vibrate when you receive a voice call.
the phone number.
3. Enter the one-touch dialing location where the
touch tone string is stored (e.g. if the string is stored
in location 2, then enter 2)
Activating vibrating alert
1. Press Menu 3 (Profiles)
4. Press Save and then enter the name that corre-
sponds with the phone number (this is optional)
2. Your phone lists each profile. Use t to highlight the
profile you want and press Options.
5. Press OK
3. Highlight Customize and press OK. Press t to reach
When you wish to call this number, make the call as you
normally would. Then, when you wish to send the touch
tone string, simply press OK.
Vibrating alert, then press Select.
4. Use t to highlight On or Off and press OK. If you choose
On, your phone will vibrate even if you have set Ringing
options (see page 59) to Silent.
Unlocked phone number
Note: The vibrating alert does not work when your phone is connected to
any charger or car kit. Also, if you have chosen the Ring once option for
the profile you’re using, the vibrating alert will only vibrate once when
your phone rings.
When the phone lock is on, no calls can be made. But if
you store a number in the unlocked phone number
location, you can make a call to that number while the
phone is locked.
See “Phone lock” on page 53 for details on phone lock.
Voice mailbox number
Storing the unlocked phone number
This number dials your voice mailbox.
1. Press Menu 4-3-2-2 (Settings - Security settings -
See “Voice messages” in next section.
Access codes - Unlocked phone number)
2. Enter lock code and press OK
Voice messages
3. Enter phone number at Number: (or press Search
Voice mail is a network service that may require a subscription
from your service provider.
and scroll through the phone book)
4. Press OK
Once everything is set up for your voice mailbox (see below),
your phone will notify you when you receive a voice message.
Calling the unlocked phone number
Note: Your phone must be locked via the phone lock to use this
feature.
New voice message will appear on the display along with the
icon, and you’ll hear a short beep. Your phone will
display the number of voice messages if you’ve received more
than one.
72
73
Setting up your voice mailbox
If an accessory like a headset or a car kit, or one with its own
loudspeaker, is connected to your phone, the scroll keys will
adjust the volume for that accessory.
Before you can retrieve any voice messages, you need to
store your voice mailbox number. Your service provider
usually gives this number to you.
Note: Using the scroll keys to adjust earpiece volume functions only
during phone calls.
When you’re ready to store your voice mailbox number,
press Menu 01-2-2 (Messages - Voice messages -
Voice mailbox number). Then enter your voice mailbox
phone number and press OK. This number can be up to 32
digits long and is used until it’s changed. So if your phone
number changes, you may need to change your voice
mailbox number along with it.
Ringing volume
This is one of the settings in your
phone’s profiles (see page 55). It sets the
default ringing volume for incoming
voice calls and message alert tones.
Setting the ringing volume
Greetings, passwords, and prompts
1. Press Menu 3 (Profiles)
These may vary in different wireless systems. So if you
need information about how to record your greeting or
how to store your password, contact your service
provider. You’ll also need to contact them on how to
listen to voice messages once you’re connected to your
voice mailbox.
2. Your phone lists each profile. Use t to highlight the
profile you want and press Options.
3. Highlight Customize and press OK. Press t to Ringing
volume, then press Select.
4. Press t to scroll through the options. When you hear the
volume level you wish to use, press OK.
Listening to your voice messages
If New voice message is displayed, just press Listen and
follow the prompts. If you’d rather listen to your
messages later, press Exit.
Warning and game tones
This is one of the settings in your phone’s profiles (see page 55).
Warning and game tones include those sounds your phone
makes for conditions such as errors, confirmations, power on,
battery low, and recharge battery, or sounds made during
game play.
You can listen to messages anytime if you press and hold
the 1 key (or press 1, then
). Calling voice mailbox
will appear on the display. Or if you prefer, you can access
your voice mailbox by pressingMenu 01-2-1 (Messages -
Voice messages - Listen to voice messages).
Turning warning tones on and off
Volume
1. Press Menu 3 (Profiles)
You can adjust the ringing volume and earpiece volume
with your phone.
2. Your phone lists each profile. Use t to highlight the
profile you want and press Options.
3. Highlight Customize and press OK. Press t to Warning
Earpiece volume
and game tones, then press Select.
While in a phone call, you can adjust the listening volume
for your phone’s earpiece. The top scroll key increases
while the bottom one decreases the volume.
4. Use t to highlight On or Off and press OK
74
75
Welcome note
6. Data and Fax Calls
You can program a welcome note into your phone to
display a message when you first turn it on (e.g. hello,
your name, a reminder, etc.). The maximum length is 36
characters.
Your phone can function as a fax/modem when
connected to your PC or laptop computer via the optional
DLR-3 Data Cable (available through your local Nokia
dealer). You must also have the appropriate fax or data
software installed and configured to send and receive
data or faxes through your phone.
1. Press Menu 01-3 (Messages - Welcome note)
2. Enter new message or edit an existing one
3. Press Options
Can I receive a data or fax call while a voice call
is in progress?
4. Press t to Save or Erase and press OK
The welcome note displays each time your phone is
switched on. Characters you enter are added to the left of
the cursor. Press Clear to delete characters to the left of the
cursor. Press t or s to move the cursor right or left.
Yes. Your phone will display either Data call or Fax call,
depending on the type of incoming call. If no cable is
connected, the phone will display Fax call, connect data
cable or Data call, connect data cable. If you have Caller
ID, the caller’s name or number will also be displayed.
See “Entering text and numbers” on page 35 for details.
You must first terminate the voice call, then launch the
appropriate data or fax software and allow the software
to accept the incoming call.
Can I receive other calls while a data or fax call
is in progress?
No. The caller will receive a busy signal.
Can I place a voice call while a data or fax call is
in progress?
No. If a voice call is attempted while a data or fax call is
in progress, the phone will display End data call? Press
End to end the data call or Back to return to the data or
fax call in progress.
Getting started
Make sure your phone is connected to your computer via
the optional DLR-3 Data Cable and your computer
recognizes the new hardware.
See the installation and configuration instructions supplied with
the DLR-3 cable for more information.
76
77
Configuring your data or fax software
To receive a data or fax call
Once properly connected and configured, your PC will
recognize your phone as an external standard fax/modem.
However, your fax or data software may already be
configured to use the existing PCMCIA or internal modem.
Your phone must be connected to your PC via the data
cable.
1. The appropriate data or fax software must be run-
ning. Consider setting your data or fax software to
automatically answer incoming calls so you can
receive them while away from your PC.
Before you can use your phone to send and receive data
or faxes, you must reconfigure your fax or data software
so that it uses your phone rather than your existing
modem. You may consider creating a separate set of
dialing properties to use when your phone is connected,
rather than changing any existing settings.
2. Your phone will display either Data call or Fax call,
depending on the type of incoming call.
3. Terminate the data call from your data software; fax
calls typically terminate automatically.
Please refer to the documentation or online help files for
your data or fax application when creating new dialing
configurations, or modifying existing settings.
Note: Avoid terminating a call by pressing your phone’s
key.
This may cause your data or fax application to temporarily lock up
and could cause loss of data.
To start a data or fax call
Manual selection of incoming data/fax calls
Note: The restrict calls feature may affect any data/fax calls you
attempt. If you experience problems, check your call restrictions.
See page 57 for details.
Certain service providers require that you preset your
phone to receive the incoming data or fax call, rather
than having the phone automatically detect the call type.
1. Initiate a data or fax call using your data or fax
Check with your service provider to see if “pre-arrangement” of
data and/or fax calls is necessary.
software configured for your phone.
2. When trying to connect to the network, the phone
displays Connecting... Once connected, the text
Data call (or Fax call) remains on the display for the
duration of the data or fax call.
Most popular data and fax programs allow you to send
additional initialization commands to the modem when
the program is launched, or when the modem is
instructed to receive a call. You will need to modify your
phone’s modem configuration in the data or fax software
so that it sends the following special initialization string
to the modem:
3. Terminate the data call from your data software; fax
calls typically terminate automatically.
Note: Avoid terminating a call by pressing your phone’s
key.
This may cause your data or fax application to temporarily lock up
and could cause loss of data.
To preset your phone to receive a data call:
Note: Data or fax calls cannot be initiated using your phone’s
keypad. All data and fax calls must be initiated using the data or
fax software.
AT+CSP=1
To preset your phone to receive a fax call:
AT+CSP=2
78
79
You should only have to make this modification once;
these settings typically are saved as a part of your data or
fax program’s settings. Please refer to the documentation
or online help files for your data or fax application when
modifying your modem’s initialization string.
7. Accessories
If you want to enhance your phone’s functionality, an
extensive range of accessories is available for you. You
can select any of these items to help accommodate your
specific communication needs. For availability of these
and other accessories, contact your service provider.
When the software has sent the proper command to your
phone, the phone will display Ready for data reception
or Ready for fax reception momentarily, along with
either a d or f status indicator at the start screen.
Once your phone is preset for either data or fax reception,
you cannot receive incoming voice calls. You must either
remove the data cable or turn the phone’s power off and
back on to restore normal voice call reception.
A few practical rules for accessory operation:
Keep all accessories out of reach of small children.
When you disconnect the power cord of any acces-
sory, grasp and pull the plug, not the cord.
Check regularly that any vehicle-installed acces-
sories are mounted and are operating properly.
Installation of any complex car accessories must be
made by qualified personnel only.
Use only batteries, chargers and accessories approved by the
phone manufacturer for use with this particular phone model.
The use of any other types may invalidate any approval or warranty
applying to the phone, and may be dangerous.
See page 6 for important battery usage information.
For availability of approved accessories, please check with your
authorized Nokia dealer.
Batteries
The following table shows battery options that are
available for your phone, charging times with the Rapid
Travel Charger (ACP-9U) and the Standard Travel Charger
(ACP-7U), talk times, and standby times. Consult your
service provider for more information.
80
81
Charging Times
Chargers & Other Accessories
The following chargers and other accessories are
available for your phone; please see your dealer for
details. Also, refer to the accessories brochure that was
included in your sales package for the entire line of Nokia
Original Accessories.
ACP-7U
Charger
ACP-9U
Charger
Battery Option
BLS-2 Extended Battery Li-Ion 900 mAh
BMS-2S Extended Battery NiMH 900 mAh
4 hrs
4 hrs
5 hrs
2 hrs
1 hr 30 min
3 hrs 30 min
Standard Travel Charger
(ACP-7U)
BLS-4 Ultra Extended Battery Li-Ion
1500 mAh
This lightweight (187g) and
durable AC charger can be
used with all battery options.
Note: The times displayed above are approximate and will allow
your battery to obtain approximately 80% of its capacity. At this
time, the battery scroll bars on your phone’s display will stop
scrolling. If you wish to obtain 100% battery capacity, please
allow another two hours to “trickle” or “ maintenance” charge.
To use the Standard Travel
Charger, plug it into a wall
outlet and connect the lead
from the charger to the base
Standby and Talk Times
of your phone. The charger can also be used together with
the Compact Desktop Charging Stand (DCH-8).
Digital
Talk Time
Analog
Talk Time
Battery Option
Standby Time
BLS-2 Extended
Battery Li-Ion
900 mAh
2 hrs to
2 hrs 55 min
40 min to
1 hr 25 min
70 to 110 hrs (dig)
10 to 15 hrs (ana)
Rapid Travel Charger (ACP-9U)
This lightweight (100g) AC charger
can be used with all battery options.
Calls can be made during charging,
even with a fully discharged battery.
BMS-2S Extended
Battery NiMH
900 mAh
2 hrs to
2 hrs 55 min
40 min to
1 hr 25 min
70 to 110 hrs (dig)
10 to 15 hrs (ana)
To use the Rapid Travel Charger
(ACP-9U), plug it into a standard
120V AC wall outlet, and connect the
lead from the charger to the base of
your phone.
BLS-4 Ultra
Extended Battery 4 hrs 50 min
3 hrs 20 min to 1 hr 10 min to 115 to 180 hrs (dig)
2 hrs 25 min 15 to 23 hrs (ana)
Li-Ion
1500 mAh
Note: The times shown are approximate. Battery operation times
vary according to signal conditions, network parameters set by the
service provider, and how you use your phone.
The charger can also be used together with the optional
Compact Desktop Charging Stand (DCH-8). Approximate
charging times for discharged batteries are shown at the
beginning of this section.
Note: Dispose of used batteries in accordance with any
local regulations.
82
83
Rapid Cigarette Lighter Charger (LCH-9)
8. Troubleshooting
You can charge
your phone’s
What if charging fails?
battery from your
vehicle battery by
using the Rapid
Cigarette Lighter
Charger (LCH-9).
If your phone displays Not charging, charging is
suspended. Make sure the battery is connected to an
approved charging device and that the battery is at room
temperature. Extreme temperatures, hot or cold, can
affect your battery’s performance and prevent charging.
Calls are possible during charging. A green light indicates
the charger is ready for charging (when not charging) or
finished charging (if it has been charging). The battery
charging times are the same as those for the Rapid Travel
Charger (ACP-9U)
If charging still fails, disconnect the charger from your
phone. Then reconnect the charger to your phone and
retry. If you still experience charging problems, contact
your dealer and, if necessary, bring your phone in to have
it serviced. Also remember to bring in your battery and
charger.
The input voltage range is from 11 to 32V DC, negative
grounding. Avoid prolonged charging with the Rapid
Cigarette Lighter Charger (LCH-9) when the car engine is
not running; this may cause the battery of your car to
drain. Note also that in some cars the cigarette lighter
plug is not provided with electricity if the ignition is not
switched on.
No service
If you’re outside the wireless service area, No service will
display on your phone. No calls can be made or received,
including emergency calls.
Compact Desktop Charging Stand (DCH-8)
What if the call doesn’t go through?
Used together with the
Your phone can make and receive calls only when it’s
switched on and in the wireless network’s service area.
No service means that you’re probably outside the
wireless service area. No calls can be made or received.
See “Checking signal strength” on page 14.
Standard Travel Charger
(ACP-7U) or the Rapid Travel
Charger (ACP-9U), the
Compact Desktop Charging
Stand (DCH-8) is an
Check call restrictions means calls to the phone number
you tried to call are restricted (see “Restrict calls” on
page 57), or your phone is locked (see “Phone lock” on
page 53).
economical choice when you
need your phone close at hand.
With the battery still attached, place your phone in the
charging stand to begin charging your phone’s battery.
Note: Check with your service provider for information about when
you need to dial a ‘1’ and/or an area code in addition to the number.
Charging is indicated by the scrolling battery bars on the
right side of your phone’s display. When the scrolling
stops, the battery is approximately 80% charged.
If you make a mistake dialing
To get a fully charged battery, leave your phone in the
charging stand for a couple of hours after the scrolling
stops.
Press Clear to delete the last character entered, or press
and hold Clear to delete all characters entered.
84
85
•
•
Should not carry the phone in a breast pocket;
9. Reference Information
Should use the ear opposite the pacemaker to minimize the
potential for interference.
Important Safety Information
•
If you have any reason to suspect that interference is
taking place, switch off your phone immediately.
Traffic Safety
Hearing Aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may want to consult
your service provider.
Do not use a hand-held telephone while driving a vehicle.
If using a hand-held phone park the vehicle before conversing.
Always secure the phone in its holder; do not place the phone on
the passenger seat or where it can break loose in a collision or
sudden stop.
The use of an alert device to operate a vehicle’s lights or horn on
public roads is not permitted.
Other Medical Devices
Operation of any radio transmitting equipment, including cellular
phones, may interfere with the functionality of inadequately
protected medical devices. Consult a physician or the
Remember, road safety always comes first!
manufacturer of the medical device to determine if they are
adequately shielded from external RF energy or if you have any
questions. Switch off your phone in health care facilities when
any regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equipment that
could be sensitive to external RF energy.
Operating Environment
Remember to follow any special regulations in force in any area
and always switch off your phone whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user’s guide for detailed safety instructions. Do not
connect incompatible products.
Vehicles
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the equipment
should only be used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles (e.g. electronic fuel
injection systems, electronic anti-skid (anti-lock) braking
systems, electronic speed control systems, air bag systems). Check
with the manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone.
Posted Facilities
Switch your phone off in any facility where posted notices so
require.
Potentially Explosive Atmospheres
Pacemakers
Switch off your phone when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Pacemaker manufacturers recommend that a minimum
separation of 6 inches (20 cm.) be maintained between a
handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research.
Persons with pacemakers:
Users are advised to switch off the phone while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
•
Should always keep the phone more than 6 inches (20 cm)
from their pacemaker when the phone is switched on;
86
87
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats;
chemical transfer or storage facilities; vehicles using liquefied
petroleum gas (such as propane or butane); areas where the air
contains chemicals or particles, such as grain, dust or metal
powders; and any other area where you would normally be
advised to turn off your vehicle engine.
Making an Emergency Call
1. If the phone is not on, switch it on
2. Key in the emergency number for your present loca-
tion (e.g. 911 or other official emergency number).
Emergency numbers vary by location.
3. Press
If certain features are in use (keyguard, restrict calls, etc.), you may
first need to turn those features off before you can make an
emergency call. Consult this document and your local cellular
service provider.
Vehicles
Only qualified personnel should service the phone, or install the
phone in a vehicle. Faulty installation or service may be dangerous
and may invalidate any warranty which may apply to the unit.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your wireless phone may be the only means of communication at
the scene of an accident - do not cut off the call until given
permission to do so.
Check regularly that all wireless phone equipment in your vehicle
is mounted and operating properly.
Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment, in the area over the air
bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates, serious
injury could result.
Radio Frequency (RF) Signals
Your wireless handheld portable telephone is a low power radio
transmitter and receiver. When it is ON, it receives and also sends
out radio frequency (RF) signals.
In August, 1996, the Federal Communications Commission (FCC)
adopted RF exposure guidelines with safety levels for handheld
wireless phones. Those guidelines are consistent with safety
standards previously set by both U.S. and international standards
bodies:
Switch off your phone before boarding an aircraft. The use of
wireless telephones in an aircraft may be dangerous to the
operation of the aircraft, disrupt the wireless telephone network
and may be illegal.
Failure to observe these instructions may lead to the suspension
or denial of telephone services to the offender, or legal action, or
both.
ANSI C95.1 (1992)*, NCRP Report 86 (1986)*, ICNIRP (1996)*.
Those standards were based on comprehensive and periodic
evaluations of the relevant scientific literature. For example, over
120 scientists, engineers, and physicians from universities,
government health agencies and industry reviewed the available
body of research to develop the ANSI Standard (C95.1).
Emergency Calls
IMPORTANT!
The design of your phone complies with the FCC guidelines (and
those standards).
This phone, like any wireless phone, operates using radio signals,
wireless and landline networks as well as user-programmed
functions which can not guarantee connection in all conditions.
Therefore, you should never rely solely upon any wireless phone
for essential communications (e.g. medical emergencies).
*American National Standards Institute, National Council on
Radiation Protection and Measurements; International
Commission on Non-Ionizing Radiation Protection.
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone features
are in use. Check with local service providers.
88
89
Care and Maintenance
10. Technical Data
Your phone is a product of superior design and craftsmanship and
should be treated with care. The suggestions below will help you
to fulfill any warranty obligations and allow you to enjoy this
product for many years. When using your phone, battery, charger,
OR any accessory:
Wireless System
Dual-Band CDMA and AMPS
Weight
142.5 g (5.0 oz.) with BLS-2
900 mAh Li-Ion Battery
129 cc (7.9 cu. in.)
Size
•
•
•
•
Keep it and all its parts and accessories out of small
children’s reach.
Frequency Range
Lowband
824.04 - 848.97 MHz (TX)
869.04 - 893.97 MHz (RX)
1850.04 - 1909.92 MHz (TX)
1930.08 - 1989.96 MHz (RX)
200mW (digital)
~300mW (analog)
3.6 V nominal
850 mAh max.
Keep it dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
Highband
Do not use or store it in dusty, dirty areas as its moving
parts can be damaged.
Transmitter Output
Do not store it in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and warp or
melt certain plastics.
Battery Voltage
Charging current
Operating Temperature -30°C to + 60°C
(-22°F to + 140°F)
•
Do not store it in cold areas. When the phone warms up (to
its normal operating temperature), moisture can form inside
the phone, which may damage the phone's electronic circuit
boards.
Number of Channels 832 lowband; 1150 highband
•
•
•
Do not attempt to open it. Non-expert handling of the
device may damage it.
Number of NAMs
Memory Locations
Memory Capacity
2
200
Do not drop, knock or shake it. Rough handling can break
internal circuit boards.
Alpha: 16 characters per location
Numeric: 32 digits per location
56 Kbps (ITU V .90)
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean it. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
Data transmission
Fax
Group 3 Send/Receive (14.4k bps)
•
•
Do not paint it. Paint can clog the device’s moving parts and
prevent proper operation.
Note: Although the 6185 is capable of data transmission rates up
to 56 Kbps, your actual transmission rate may vary, due to your
service provider’s network. Please check with your service provider
for actual data transmission rates.
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications or attachments could
damage the phone and may violate regulations governing
radio devices.
USA
NOKIA MOBILE PHONES – 6200 Courtney Campbell Causeway,
Suite 900, Tampa, FL 33607
Tel: 1-888-NOKIA2U (1-888-665-4228)
TTY Users: 1-800-24NOKIA (1-800-246-6542)
•
If the phone, battery, charger, or any accessory is not work-
ing properly, take it to your nearest qualified service facility.
The personnel there will assist you, and if necessary, arrange
for service.
CANADA
NOKIA PRODUCTS LTD. – 575 Westney Rd. South,
Ajax, Ontario L1S 4N7. Tel: (905) 427-6654
The information contained in this phone was written for dual-
mode CDMA and AMPS phones. The right to make changes and
improvements to any of the products described in this guide
without prior notice is reserved.
Issue No. 2 9352105
Printed in Canada
05/99
©1999 Nokia Mobile Phones. All rights reserved.
90
91
b) The Product has been damaged from external causes such as
collision with an object, or from fire, flooding, sand, dirt,
windstorm, lightning, earthquake or damage from exposure to
weather conditions, an Act of God, or battery leakage, theft,
blown fuse, or improper use of any electrical source, or damage
caused by the connection to other products not recommended for
interconnection by NMP.
11. Warranty
NOKIA One-Year Limited Warranty
Nokia Mobile Phones, Inc. (“NMP”) warrants that this cellular
phone (“Product”) is free from defects in material and
workmanship that result in Product failure during normal usage,
according to the following terms and conditions:
c) NMP was not advised by the Consumer in writing of the alleged
defect or malfunction of the Product within fourteen (14) days
after the expiration of the applicable limited warranty period.
1. The limited warranty for the Product extends for ONE (1) year
beginning on the date of the purchase of the Product.
d) The Product serial number plate or the accessory data code has
been removed, defaced or altered.
2. The limited warranty extends to the original purchaser of the
Product (“Consumer”) and is not assignable or transferable to any
subsequent purchaser/end-user.
e) The defect or damage was caused by the defective function of
the cellular system or by inadequate signal reception by the
external antenna.
3. The limited warranty extends only to Consumers who purchase
the Product in the United States.
8. If a problem develops during the limited warranty period, the
Consumer shall take the following step-by-step procedure:
4. During the limited warranty period, NMP will repair, or replace,
at NMP's option, any defective parts, or any parts that will not
properly operate for their intended use with new or factory rebuilt
replacement items if such repair or replacement is needed
because of product malfunction or failure during normal usage.
No charge will be made to the Consumer for any such parts. NMP
will also pay for the labor charges incurred by NMP in repairing
or replacing the defective parts. The limited warranty does not
cover defects in appearance, cosmetic, decorative or structural
items, including framing, and any non-operative parts. NMP's
limit of liability under the limited warranty shall be the actual
cash value of the Product at the time the Consumer returns the
Product for repair, determined by the price paid by the Consumer
for the Product less a reasonable amount for usage. NMP shall not
be liable for any other losses or damages. These remedies are the
Consumer’s exclusive remedies for breach of warranty.
a) The Consumer shall return the Product to the place of purchase
for repair or replacement processing.
b) If “a” is not convenient because of distance (more than 50
miles) or for other good cause, the Consumer shall ship the
Product prepaid and insured to:
Nokia Mobile Phones, Inc.
Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL. 32901
c) The Consumer shall include a return address, daytime phone
number and/or fax number, complete description of the problem,
proof of purchase and service agreement (if applicable).
Expenses related to removing the Product from an installation are
not covered under this limited warranty.
5. Upon request from NMP, the Consumer must prove the date of
the original purchase of the Product by a dated bill of sale or
dated itemized receipt.
d) The Consumer will be billed for any parts or labor charges not
covered by this limited warranty. The Consumer will be
responsible for any expenses related to reinstallation of the
Product.
6. The Consumer shall bear the cost of shipping the Product to
NMP in Melbourne, Florida. NMP shall bear the cost of shipping
the Product back to the Consumer after the completion of service
under this limited warranty.
e) NMP will repair or authorize the repair of the Product under the
limited warranty within 30 days after receipt of the Product by
NMP or an NMP authorized service center. If NMP cannot perform
repair covered under this limited warranty within 30 days, or after
a reasonable number of attempts to repair the same defect, NMP
at its option, will provide a replacement Product or refund the
purchase price of the Product less a reasonable amount for usage.
7. The Consumer shall have no coverage or benefits under this
limited warranty if any of the following conditions are applicable:
a) The Product has been subject to abnormal use, abnormal
conditions, improper storage, exposure to moisture or dampness,
unauthorized modifications, unauthorized connections,
unauthorized repair, misuse, neglect, abuse, accident, alteration,
improper installation, or other acts which are not the fault of
NMP, including damage caused by shipping.
92
93
f) If the Product is returned to NMP during the limited warranty
period, but the problem with the Product is not covered under the
terms and conditions of this limited warranty, the Consumer will
be notified and given an estimate of the charges the Consumer
must pay to have the Product repaired, with all shipping charges
billed to the Consumer. If the estimate is refused, the Product will
be returned freight collect. If the Product is returned to NMP after
the expiration of the limited warranty period, NMP's normal
service policies shall apply and the Consumer will be responsible
for all shipping charges.
13. This is the entire warranty between NMP and the Consumer,
and supersedes all prior and contemporaneous agreements or
understandings, oral or written, and all communications relating
to the Product, and no representation, promise or condition not
contained herein shall modify these terms.
14. This limited warranty allocates the risk of failure of the
Product between the Consumer and NMP. The allocation is
recognized by the Consumer and is reflected in the purchase price
of the Product.
15. Any action or lawsuit for breach of warranty must be
commenced within eighteen (18) months following delivery of
the Product.
9. The Product consists of newly assembled equipment that may
contain used components that have been reprocessed to allow
machine compliance with Product performance and reliability
specifications.
16. Questions concerning this limited warranty may be directed
to:
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS
FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE
DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY.
OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE
CONSUMER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NMP SHALL NOT
BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF
Nokia Customer Service
6200 Courtney Campbell Causeway, Ste. 900
Tampa, FL 33607
Telephone: 1-888-NOKIA2U (1-888-665-4228)
or (813) 288-3800
Facsimile: (813) 287-6612
TTY Users: 1-800-24NOKIA (1-800-246-6542)
ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR
REVENUE, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR
ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY
SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS
OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO
PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE
PRODUCT OR ARISING FROM BREACH OF THE WARRANTY,
BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY
OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NMP KNEW OF
THE LIKELIHOOD OF SUCH DAMAGES. NMP SHALL NOT BE LIABLE
FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED
WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE
PRODUCT IS BEING REPAIRED.
17. The limited warranty period for NMP supplied attachments
and accessories is specifically defined within their own warranty
cards and packaging.
*Nokia is a registered trademark of Nokia Corporation.
11. Some states do not allow limitation of how long an implied
warranty lasts, so the above one-year warranty limitation may
not apply to you (the Consumer). Some states do not allow the
exclusion or limitation of incidental and consequential damages,
so certain of the above limitations or exclusions may not apply to
you (the Consumer). This limited warranty gives the Consumer
specific legal rights and the Consumer may also have other rights
which vary from state to state.
12. NMP neither assumes nor authorizes any authorized service
center or any other person or entity to assume for it any other
obligation or liability beyond that which is expressly provided for
in this limited warranty including the provider or seller of any
extended warranty or service agreement.
94
95
Current call timer 32
Games 38
One-touch dialing 48
Profiles 54
Recalling numbers by
name 52
12. Index
C
F
Calculator 20
Fax and data calls 33
Fax calls 77
Calendar 20
Call forwarding 22
Call log 24
Clearing call lists 29
Dialed calls 33
Missed calls 45
Received calls 56
Call restrictions 57
Call settings 25
Call timers 25
A
Configuring software 78
Getting started 77
Manual selection 79
Prearranged 79
Receiving 78
Access codes 17
Lock code 43
Security code 62
Accessories 81
Batteries 81
Restrict calls 57
Text messages 67
Vibrating alert 73
Current call timer 32
Custom menu 66
Starting a call 78
Chargers 83
Alarm Clock
G
Power off 18
Setting 17
Snooze 18
Games 38
D
Getting connected 3
All calls timer 18
Clearing call timers 30
Current call timer 32
Life timer 42
Data and fax calls 33
Data calls 77
Alarm clock 17
All calls timer 18
Answering a call 15
Automatic answer 19
Automatic redial 19
I
Configuring software 78
Getting started 77
Manual selection 79
Prearranged 79
Receiving 78
Inbox 40
In-call menu 40
Call waiting 26
Caller ID 26
Calling card 27
Making calling card calls
29
Storing calling cards 27
Care and maintenance 90
Charging 3
K
Keyguard 15
Activating Keyguard 15
Deactivating Keyguard
15
B
Starting a call 78
Dialed calls 33
Basics 13
Answering a call 15
Ending a call 14
Getting a strong signal
13
Making a call 14
Switching phone on and
off 13
Keypad tones 40
E
Earpiece volume 74
Editing
Chargers 83
When is a good time to
charge? 4
When is charging
complete? 4
L
Languages 41
Last number redial 41
Life timer 42
Lights 42
123 mode 36
ABC mode 35
Special characters 36
Emergency calls 34, 88
Emergency key 9 34
Emergency key 9 34
Ending a call 14
Entering letters and
numbers 35
Batteries 81
Clear call lists 29
Clear timers 30
Clock 30
Alarm clock 17
Conference calls 32
Cool features 7
Alarm clock 17
Calendar 20
Attaching the battery 3
Charging the battery 3
Charging times 82
Discharging batteries 5
Important battery infor-
mation 6
Removing the battery 5
Standby and talk times
82
Lock code 43
Changing your lock code
43
Phone lock 53
M
Erasing names and numbers
53
Making a call 14
Making calling card calls 29
Manual touch tones 43
Memory status 44
Call log 24
CLI ringing tones 50
Conference calls 32
96
97
Menu and submenu
numbering 10
Message alert tone 44
Messages 44
Microphone 45
Muting and unmuting 45
Missed calls 45
Accessing profiles 55
Customizing profiles 55
Keypad tones 40
Lights 42
Message alert tone 44
Renaming profiles 56
Ringing options 60
Ringing tones 60
Ringing volume 75
Selecting profiles 55
Vibrating alert 73
Warning and game tones
75
Scroll bar 9
Scroll key 9
TTY contact information 91
U
Scrolling view 61
Security code 62, 62
Changing your security
code 62
Security settings 62
Send caller ID 63
Service Types 65
Setting time (manual) 30
Setting time (network) 31
Settings 64
Signal strength 13
Softkeys 8
Special characters (names)
36
Unlocked phone number 72
Use number 24
Using your phone 8
Navigating tools 8
Menu and submenu
numbering 10
Scroll bar 9
N
NAM Selection 46
NAM update 46
Scroll key 9
Softkeys 8
Network feature setting 47
Network services
Call Forwarding 22
Call Waiting 26
V
Vibrating alert 73
Voice messages 73
Greetings, passwords,
and prompts 74
Listening to your voice
messages 74
Q
Quick saving numbers 64
Caller ID 26
Conference calls 32
Text messages 67
Voice messages 73
Special characters
(numbers) 37
Storing a calling card 27
Storing names and numbers
52
R
Ready screen 8
Recalling names and
numbers 52
Recalling numbers by name
52
Received calls 56
Redialing
Last number redial 41
Reference information 86
Restoring factory settings
57
Restrict calls 57
Ringing options 60
Ringing tones 60
Ringing volume 75
Roaming 65
O
Setting up your voice
mailbox 74
Volume 74
One-touch dialing 48
Quick save 64
P
Summary of menu items 11
Switching phone on and off
13
Synchronization 64
System choices 65
System selection 64
Roaming 65
Paging 67
Earpiece volume 74
Ringing volume 75
Receiving a page 69
Phone book 51
Erasing names and
numbers 53
W
Warning and game tones 75
Welcome note 76
Recalling names and
numbers 52
Recalling numbers by
name 52
Scrolling view 61
Storing names and
numbers 52
Y
T
Your phone A to Z 17
Technical data 91
Text messages 67
Erasing text messages 69
Inbox 40
Roaming indicators 65
Phone lock 53
Lock code 43
Unlocked phone number
72
Phone settings 54
Profiles 54
S
Receiving text messages
67
Touch tones 70
Manual touch tones 43
Touch tone length 70
Troubleshooting 85
Safety
At a glance 1
Important safety
information 86
Using this guide 2
98
99
NOTES
100
|