9243644_6155_en_au.fm Page -9 Wednesday, December 28, 2005 11:28 AM
Nokia 6155 User’s Guide
i
9243644_6155_en_au.fm Page -7 Wednesday, December 28, 2005 11:28 AM
Contents
For your safety............................... vii
About your device ............................... viii
Network services.................................. viii
Shared memory.......................................ix
Last dialled number......................... 10
Conference calling........................... 10
Answer calls.......................................... 10
An incoming call .............................. 10
Adjust the earpiece volume .......... 11
Answer a call with the keypad
locked.................................................. 11
Loudspeaker....................................... 11
Call options........................................ 11
Keyguard................................................ 12
Lock the keypad................................ 12
Unlock the keypad........................... 12
Welcome........................................... x
Getting help............................................. x
Find your phone label........................ x
Nokia support and contact
information........................................... x
1. Phone at a glance........................1
Keys and parts........................................ 1
Standby mode......................................... 2
Quick keys................................................ 2
Indicators and icons ............................. 2
Phone menus .......................................... 3
Scroll method...................................... 3
In-phone help...................................... 4
Lock code security settings................. 4
Go to functions...................................... 5
Choose Go to functions.................... 5
Organise functions............................. 5
3. Text entry...................................13
Standard mode..................................... 13
Text (Abc) ........................................... 13
Numbers (123).................................. 13
Punctuation and special
characters........................................... 13
Predictive text mode .......................... 13
Activate or deactivate .................... 14
Text entry ........................................... 14
Change case and mode...................... 14
4. Messages ....................................15
Text messages....................................... 15
Compose and send........................... 15
Read message ................................... 16
Reply to message............................. 17
Templates........................................... 17
Text message folders....................... 18
Distribution list................................. 19
Delete messages............................... 19
Change sending options................. 20
Change other settings .................... 20
Multimedia messages......................... 21
MMS settings.................................... 22
Voice messages.................................... 26
2. Set up your phone.......................6
Antenna.................................................... 6
Battery...................................................... 6
Remove the back cover .................... 7
Remove the battery........................... 7
UIM card slot....................................... 7
Replace the battery........................... 7
Replace the back cover .................... 8
Charge the battery............................. 8
Turn your phone on or off................... 9
Connect the headset ............................ 9
Make a call.............................................. 9
Keypad................................................... 9
Contacts list....................................... 10
iii
9243644_6155_en_au.fm Page -6 Wednesday, December 28, 2005 11:28 AM
Save voice mailbox number.......... 26 7. Camera........................................39
Call and setup voice mail.............. 27
Listen to voice messages............... 27
Automate voice mail ...................... 27
Clear voice mail icon...................... 28
Web messaging ................................... 28
Take a photo......................................... 39
Record a video clip.......................... 40
Self-timer .......................................... 41
Settings .............................................. 41
8. Gallery ........................................42
Folders.................................................... 42
5. Call register................................29
View missed calls................................ 29
View received calls ............................. 29
View dialled numbers......................... 30
View call times................................. 30
Delete call registers............................ 30
Call duration......................................... 30
Data and fax call duration ............... 31
Minibrowser duration........................ 31
9. Media..........................................44
Media player......................................... 44
Radio....................................................... 44
Turn the radio on and off.............. 45
Recorder ................................................ 46
Record speech or sound................. 46
Options............................................... 46
Media equaliser................................... 47
Activate an equaliser set............... 47
6. Contacts .....................................33
Add new contacts............................... 33
Save contact name and number. 33
Save contact number only............ 33
Save an entry.................................... 33
Save numbers and text items ...... 33
Change default number................. 34
Caller groups..................................... 34
Set up speed dials ........................... 34
Voice tags.............................................. 35
Assign a voice tag to an entry..... 35
Dial a number................................... 36
Voice tags .......................................... 36
Edit contacts list entries................... 36
Delete contacts entries ..................... 37
Access the contacts menu................ 37
Search for a name........................... 38
Configure settings........................... 38
Send and receive contacts ............... 38
Send a business card...................... 38
10. Settings....................................48
Profiles................................................... 48
Personalise a profile ....................... 48
Set a timed profile .......................... 48
Themes................................................... 49
Main display settings......................... 49
Wallpaper .......................................... 49
Screen saver...................................... 49
Power saver....................................... 49
Colour schemes................................ 50
Choose a banner.............................. 50
Backlight time-out.......................... 50
Mini display settings.......................... 50
Wallpaper .......................................... 50
Screen saver...................................... 50
Power saver....................................... 51
Colour schemes................................ 51
Tone settings........................................ 51
Time and date settings...................... 52
Clock.................................................... 52
Date..................................................... 52
Date and time auto-update.......... 52
iv
9243644_6155_en_au.fm Page -5 Wednesday, December 28, 2005 11:28 AM
Call settings .......................................... 52 11. Organiser..................................65
Anykey answer.................................. 52
Preferred carrier ............................... 52
Automatic redial............................... 52
Speed dials......................................... 53
Open fold to answer........................ 53
Calling card........................................ 53
Data or fax calls ............................... 54
Call summary..................................... 54
Ringing tone for no caller ID........ 55
Abbreviated dialling........................ 55
International prefix ......................... 55
Video ringing tone ........................... 55
Phone settings...................................... 55
Phone language................................ 55
Memory status.................................. 55
Automatic keyguard........................ 55
DTMF tones........................................ 56
Start-up tone .................................... 56
Help text activation ........................ 56
Connectivity.......................................... 57
Infrared ............................................... 57
Voice commands and voice tags..... 57
Hands-free operation...................... 58
Enhancement settings........................ 59
Headset............................................... 59
Hands-free operation...................... 59
Charger................................................ 59
Security settings.................................. 60
Phone lock.......................................... 60
Allow numbers.................................. 60
Change lock code............................. 61
Call restrictions................................. 61
Voice privacy ..................................... 62
Application settings............................ 62
Network.................................................. 62
Roaming options .............................. 63
Mode.................................................... 63
Network services.................................. 63
Store a feature code........................ 63
Call diverting..................................... 64
Restore factory settings..................... 64
Alarm clock ........................................... 65
Set or change alarm setting ......... 65
Repeat alarm..................................... 65
Set the alarm tone........................... 65
Snooze time-out .............................. 65
Alarm conditions.............................. 66
Turn an alarm off............................. 66
Calendar................................................. 66
Open..................................................... 66
Go to a date....................................... 66
Note a specific date........................ 66
View notes (day view)..................... 67
Options while viewing a list of
notes.................................................... 67
Send a note........................................ 68
Receive calendar notes................... 68
Notes....................................................... 68
To-do list................................................ 69
Add a to-do note.............................. 69
View a to-do note............................ 69
Calculator.............................................. 70
Currency converter.......................... 70
Countdown timer ................................ 71
Set the timer..................................... 71
Change the time............................... 71
Interrupt the timer .......................... 71
Stopwatch ............................................. 71
Measure time.................................... 72
Operation note.................................. 72
Options................................................ 73
12. Mobile web .............................74
Mobile Internet access....................... 74
Sign on ................................................... 75
Navigate the mobile Internet........... 75
Phone keys......................................... 75
Receive a call while online............ 75
Make an emergency call while
online................................................... 75
Clear the cache and disconnect... 76
v
9243644_6155_en_au.fm Page -4 Wednesday, December 28, 2005 11:28 AM
13. Extras .......................................77
Games..................................................... 77
Collection.............................................. 77
Memory.................................................. 77
14. PC connectivity........................78
USB data transfer ............................... 78
Transfer with Windows Explorer. 78
Nokia PC Suite..................................... 79
15. Enhancements..........................81
16. Battery information ................82
Charging and discharging................. 82
Nokia battery authentication
guidelines.............................................. 83
17. Care and maintenance ............85
18. Additional safety information86
Operating environment.......................86
Medical devices.....................................86
Vehicles....................................................87
Potentially explosive environments.87
Emergency calls.....................................88
Certification information (SAR)........88
MANUFACTURER’S LIMITED
WARRANTY.....................................91
Index ...............................................94
vi
9243644_6155_en_au.fm Page -3 Wednesday, December 28, 2005 11:28 AM
For your safety
SWITCH OFF WHEN
REFUELLING
Do not use the device at a
refuelling point. Do not use
near fuel or chemicals.
Read these simple guidelines. Not
following them may be dangerous or
illegal. Read the complete user guide
for further information.
SWITCH ON SAFELY
Do not switch the device on
when wireless phone use is
prohibited or when it may
cause interference or
danger.
SWITCH OFF NEAR BLASTING
Follow any restrictions.
Do not use the device
where blasting is in
progress.
USE SENSIBLY
Use only in the normal
position as explained in the
product documentation.
Do not touch the antenna
unnecessarily.
ROAD SAFETY COMES FIRST
Obey all local laws. Always
keep your hands free to
operate the vehicle while
driving. Your first
consideration while driving
should be road safety.
QUALIFIED SERVICE
Only qualified personnel
may install or repair this
product.
INTERFERENCE
Do not switch the device on
when wireless phone use is
prohibited or when it may
cause interference or
danger.
ENHANCEMENTS AND
BATTERIES
Use only approved
enhancements and
batteries. Do not connect
incompatible products.
SWITCH OFF IN HOSPITALS
Follow any restrictions.
Switch the device off near
medical equipment.
WATER-RESISTANCE
Your phone is not water-
resistant. Keep it dry.
SWITCH OFF IN AIRCRAFT
Follow any restrictions.
Wireless devices can cause
interference in aircraft.
BACK-UP COPIES
Remember to make back-
up copies or keep a written
record of all important
information.
vii
9243644_6155_en_au.fm Page -2 Wednesday, December 28, 2005 11:28 AM
CONNECTING TO OTHER
DEVICES
■ Network services
When connecting to any
other device, read its user
guide for detailed safety
instructions. Do not
connect incompatible
products.
To use the device you must have
service from a network operator.
Many of the features in this device
depend on features in the wireless
network to function. These network
services may not be available on all
networks or you may have to make
specific arrangements with your
network operator before you can
utilise them. Your network operator
may need to give you additional
instructions for their use and explain
what charges will apply.
EMERGENCY CALLS
Ensure the device is
switched on and in service.
Press the end key as many
times as needed to clear the
display and return to the
main screen. Enter the
emergency number, then
press the call key. Give your
location. Do not end the
call until given permission
to do so.
Some networks may have limitations
that affect how you can use network
services. For instance, some networks
may not support all language-
dependent characters and services.
Your network operator may have
requested that certain features be
disabled or not activated in your
device. If so, they will not appear on
your device menu. Contact your
network operator for more
■ About your device
The wireless devices described in this
guide are approved for use on the
CDMA 800 and 1900, and AMPS.
Contact your network operator for
more information about networks.
information.
When using the features in this device,
obey all laws and respect privacy and
the legitimate rights of others.
Warning: To use any features
in this device, other than the
alarm clock, the device must
be switched on. Do not switch
the device on when wireless
phone use may cause
interference or danger.
viii
9243644_6155_en_au.fm Page -1 Wednesday, December 28, 2005 11:28 AM
■ Shared memory
The following device features may
share memory: contacts; text
messages; photos, images, and tones in
gallery; calendar notes; games; and
applications. Use of one or more of
these features may reduce the memory
available for the remaining features
sharing memory. If your phone displays
a message that the memory is full
when you try to use a shared memory
feature, delete some of the
information or entries stored in the
shared memory features before
continuing. Some of the features, such
as photos, images, and tones in gallery;
text messages; and applications may
have a certain amount of memory
specially allotted to them in addition
to the memory shared with other
features.
ix
9243644_6155_en_au.fm Page 0 Wednesday, December 28, 2005 11:28 AM
Welcome
Congratulations on your purchase of
Nokia support and contact
the Nokia 6155 mobile phone. Your
phone provides many functions
practical for daily use, such as a hands-
free loudspeaker, alarm clock,
calculator, calendar, and more. Your
phone can also connect to a PC, laptop,
or other device using a data cable. To
personalise your phone, you can set
your favourite ring tones.
information
For the latest version of this guide,
downloads, services and additional
information related to your
Nokia product, please visit
www.nokia-asia.com/support or your
local Nokia web site.
Should you still require assistance,
please refer to www.nokia-asia.com/
contactus.
■ Getting help
To check for the nearest Nokia care
center location for maintenance
services, you may like to visit
www.nokia-asia.com/repair.
Find your phone label
If you need help, Nokia Customer Care
is available for assistance.
Before calling, we recommend that
you write down the Electronic serial
number (ESN) and have it available.
The ESN is found on the type label,
which is located beneath the battery
on the back of the phone. See “Remove
the back cover”, p. 7 and “Remove the
battery”, p. 7.
x
9243644_6155_en_au.fm Page 1 Wednesday, December 28, 2005 11:28 AM
P h o n e a t
a
g l a n c e
1. Phone at a glance
•
•
•
Charger port (9)
Pop-Port™ connector (10)
Microphone (11)
■ Keys and parts
•
•
•
•
•
•
•
•
•
Loudspeaker (1)
Voice command key (2)
Volume key (3)
Mini display (4)
Camera lens (5)
Camera flash (6)
Headset connector (7)
Camera and Video key (8)
Infrared (9)
•
•
•
•
•
•
Earpiece port (1)
Display screen (2)
Left selection key (3)
Call key (4)
The voice key functions are as follows:
•
Short press—Answer an incoming
call.
Keypad (5)
•
Long press—Answer or make a
voice call.
Four-way scroll and center
selection key (6)
•
•
Right selection key (7)
Power key and end key (8)
1
9243644_6155_en_au.fm Page 2 Wednesday, December 28, 2005 11:28 AM
P h o n e a t
a
g l a n c e
■ Standby mode
■ Quick keys
Depending on your network operator
and the model number of your phone,
some or all of the following selection
keys may appear in standby mode.
Note: Depending on your
network operator and the
model number of your phone,
some or all of the following
quick keys may appear in
standby mode.
In standby mode, the four-way scroll
key instantly takes you to
frequently-accessed menus:
Scroll up or down to view the contacts
list.
Scroll right to view the calendar or
network operator menu.
The standby mode is home base and
indicates your phone is in the idle
state.
Scroll left to quickly create a text
message.
Signal strength (1)—A higher bar
indicates a stronger network signal.
Press the center selection key to view
the main menu or a selected submenu.
Menu (2)—Press the center selection
key to select this option.
■ Indicators and icons
Go to (3)—Press the left selection key
to select this option.
Depending on your wireless service
provider or network operator and the
model number of your phone, some or
all of the following indicators and
icons may appear in standby mode.
Names(4)—Press the right selection
key to select this option.
Battery level (5)—A higher bar
indicates more power in the battery.
You have a new text or picture
message. See “Text messages”, p. 15.
You have missed a call. See “View
missed calls”, p. 29.
You have new voice messages.
See “Voice messages”, p. 26.
2
9243644_6155_en_au.fm Page 3 Wednesday, December 28, 2005 11:28 AM
P h o n e a t
a
g l a n c e
Your phone keypad is locked.
See “Keyguard”, p. 12.
■ Phone menus
Phone features are grouped according
to function and are accessed through
the main menus. Each main menu
contains submenus and lists from
which you can select or view items and
personalise your phone features.
Your phone is set to the silent
profile. See “Profiles”, p. 48.
The alarm clock is set to on.
See “Alarm clock”, p. 65.
The countdown timer is running.
To access these menus and submenus,
use the scroll method or a shortcut.
The stopwatch timer is running in
the background.
You can change your menu view from
list to grid. Select Menu > Options >
Main menu view > List or Grid.
Integrated hands-free is active.
See “Loudspeaker”, p. 11.
The timed profile is selected.
See “Profiles”, p. 48.
Note: Some features may not
be available, depending on
your network. For more
information, contact your
network operator.
or
An enhancement
is connected to the phone.
See “Enhancement settings”, p. 59.
Voice privacy encryption is active
(or is not active) in the network.
Scroll method
You are in a digital network.
See “Network services”, p. viii.
You can use the four-way
scroll key to scroll up,
down, left, and right
through the options.
You are in an analog network.
See “Network services”, p. viii.
1. In standby mode, select Menu, and
You are in a 1XRTT network.
See “Network services”, p. viii.
scroll through the main menus.
As you scroll through the menus,
the menu number appears in the
upper right corner of the display.
Below the battery level indicator is
a scroll bar with a tab that moves
up or down on the right side of the
display screen as you scroll through
the menus, providing a visual
You are roaming outside your
home network. See “Roaming options”,
p. 63.
Infrared connectivity is activated.
See“Infrared”, p. 57.
3
9243644_6155_en_au.fm Page 4 Wednesday, December 28, 2005 11:28 AM
P h o n e a t
a
g l a n c e
representation of your current
position in the menu structure.
■ Lock code security
settings
2. When you arrive at a menu, press
the center selection key to select
submenus.
Your device has a security option
allowing you to lock your phone with a
code. When the code is set and turned
•
Select Back (the right selection on, no outgoing calls are allowed and
key) to return to the previous
menu.
the menu cannot be accessed without
entering the correct code first. This
prevents unauthorised outgoing calls
or access to any information stored on
your device.
•
Press the end key to return to
standby mode from any menu
or submenu.
The Security option is in the Settings
menu. The first time you access the
Security option, you must enter a lock
code. The default lock code may vary
depending on your wireless service
provider or network operator.
The preset lock code may be the last
five digits of your phone number,
12345 or 00000. If none of these work,
contact your wireless service provider
or network operator for help.
In-phone help
Many features have brief descriptions
(help text) you can view on the display.
To view these descriptions, you must
first activate help text as follows.
In standby mode, select Menu >
Settings > Phone > Help text
activation > On or Off.
Scroll to a feature and wait about 14
seconds. Scroll down to view all of the
description, or select Back to exit.
You must enter the lock code to access
the following Security option:
1. In standby mode, select Menu >
Settings > Security.
2. Enter the lock code, and select OK.
See “Change lock code”, p. 61.
4
9243644_6155_en_au.fm Page 5 Wednesday, December 28, 2005 11:28 AM
P h o n e a t
a
g l a n c e
■ Go to functions
The Go to menu enables you to change
the function of the left selection key
on your phone. With this function, you
can quickly access your most
frequently used functions from the
Go to menu in standby mode.
Choose Go to functions
1. In standby mode, select Go to >
Options > Select options.
2. Scroll up or down to highlight the
desired function.
3. Select Mark to add a function or
Unmark to remove a function.
4. Select Done when you have added
all desired functions.
5. Select Yes to save the changes.
6. In standby mode, select Go to to
display a list of the functions you
selected in step 2.
Organise functions
1. In standby mode, select Go to >
Options > Organise.
2. Scroll up or down to highlight the
function you want to rearrange,
and select Move > Move up, Move
down, Move to top, or Move to
bottom.
3. Select Done > Yes to save the
changes.
5
9243644_6155_en_au.fm Page 6 Wednesday, December 28, 2005 11:28 AM
S e t u p y o u r p h o n e
2. Set up your phone
Note: Do not
■ Antenna
touch the
Your device has a fixed and extendable
antenna
antenna located at the top of the
unnecessarily
phone with the fold closed. Hold the
with the
phone with the antenna area pointed
device
up and over your shoulder.
switched on.
Contact with
the antenna
affects call
quality and may cause the
device to operate at a higher
power level than otherwise
needed. Not touching the
antenna area during a phone
call optimises the antenna
performance and battery life.
■ Battery
Note: Always switch off the
power, and disconnect the
charger and any other device
before removing the cover.
Avoid touching electronic
components while changing
the cover. Always store and
use the device with the cover
attached.
6
9243644_6155_en_au.fm Page 7 Wednesday, December 28, 2005 11:28 AM
S e t u p y o u r p h o n e
Remove the back cover
UIM card slot
1. With the back of the phone facing
you, push down on the back cover.
Your phone has a UIM (CDMA SIM)
card slot built into the mechanics.
However, the UIM is not functional in
this phone model. Avoid placing
anything into the UIM card slot.
2. Slide the back cover toward the
bottom of the phone and remove.
Remove the battery
Replace the battery
1. Insert the battery, gold-coloured
contact end first, into the battery
slot.
After you have removed the back
cover, insert your finger into the finger
grip, and lift the battery from its
compartment.
Note: Always switch off the
device, and disconnect the
charger before removing the
battery.
2. Push down on the other end of the
battery to snap the battery into
place.
7
9243644_6155_en_au.fm Page 8 Wednesday, December 28, 2005 11:28 AM
S e t u p y o u r p h o n e
After a few seconds, the battery
Replace the back cover
indicator in the display starts to
scroll from bottom to top. If the
battery is completely discharged,
it may take a few minutes before
the charging indicator appears on
the display or before any calls can
be made.
1. Set the back cover on the phone
with the cover tabs aligned with
the slots in the phone.
The ACP-12, ACP-9, ACP-8, ACP-7,
and the LCH-12 can also be used to
charge the phone, but must be used
with the CA-44 adaptor included in the
box.
2. Slide the back cover toward the top
of the phone until the back cover is
securely in place.
1. Plug the charger transformer into a
standard ac outlet.
Charge the battery
2. Insert the charger output plug into
the CA-44 adapter jack. Insert the
CA-44 plug into the jack on the
bottom of the phone.
Note:Before you use a charger
with this device, check its
model number. This device is
intended for use when
supplied with power from the
AC-3 or AC-4 charger.
1. Plug the charger transformer into a
standard ac outlet.
2. Insert the charger output plug into
the round jack at the bottom end of
the phone.
Warning: Use only batteries,
chargers, and enhancements
approved by Nokia for use
with this particular model.
The use of any other types
may invalidate any approval
or warranty, and may be
dangerous.
8
9243644_6155_en_au.fm Page 9 Wednesday, December 28, 2005 11:28 AM
S e t u p y o u r p h o n e
With the headset connected, you can
make, answer, and end calls as usual.
■ Turn your phone on
or off
1. To turn your phone on or off, press
and hold the end key on the keypad
for at least 4 seconds.
2. Enter the lock code, if necessary,
and select OK. See “Change lock
code”, p. 61.
Warning: Do not switch the
phone on when wireless
phone use is prohibited or
when it may cause
•
•
Use the keypad to enter numbers.
Press the call key to place a call.
See “Phone at a glance”, p. 1.
interference or danger.
•
Press the end key to end a call.
■ Connect the headset
You can also plug a compatible
headset into the 2.5-mm headset jack
on the right side of your phone to allow
hands-free operation.
See “Enhancement settings”, p. 59.
■ Make a call
Note: Before making or
receiving a call, fully extend
the whip antenna.
1. Plug a compatible Nokia headset
connector into the Pop-Port
Keypad
connector at the bottom end of
1. Enter the phone number and press
the call key. (To delete a character
to the left of the cursor, select
Clear.)
your phone.
mode.
appears in standby
2. Position the headset on your ear.
2. Press the end key to end the call, or
select End call to cancel the call
attempt.
9
9243644_6155_en_au.fm Page 10 Wednesday, December 28, 2005 11:28 AM
S e t u p y o u r p h o n e
Contacts list
1. In standby mode, scroll down to
display your contacts list and
highlight your desired entry.
■ Answer calls
An incoming call
1. With the fold open, press the call
key, or select Answer to answer the
call.
2. Select Details to highlight your
desired number; then select Call.
2. Press the end key to reject the call.
Last dialled number
1. In standby mode, press the call key
to display the last 30 numbers
dialled.
Select Silence to mute the ringing
tone, then Dismiss, or do nothing.
The call is eventually diverted to
voicemail.
2. Scroll to the number (or name) you
want to redial, and press the call
key.
With your phone set to silent in the
profiles menu, select Dismiss to
divert the call to voicemail.
3. With the fold closed, press the
volume key to mute the ringing
tone.
Conference calling
Note: Conference calling is a
network dependant service.
A short press of the voice key
answers an incoming call with the
loudspeaker.
1. Make a call to the first participant.
2. With the first participant on the
By default, your phone answers an
incoming call when you open the fold.
You can change the setting to not
answer the call when the fold opens.
line, select Options > New call.
3. Enter the phone number of the
second participant, or select
Search to retrieve a number from
the contacts list. Select Call. The
first participant is put on hold.
In standby mode, select Menu >
Settings > Call > Answer when fold is
opened > On or Off.
4. When the second participant picks
up, press the call key to connect
the calls.
5. To end the conference call, select
Options > End all calls, or press the
end key.
10
9243644_6155_en_au.fm Page 11 Wednesday, December 28, 2005 11:28 AM
S e t u p y o u r p h o n e
You can use your phone as a
loudspeaker during a call.
Adjust the earpiece volume
Whether in or out of a call, you can
scroll the volume key located on the
left side of your device up or down to
adjust the volume of the earpiece.
When you adjust the volume, a bar
chart indicates the volume level.
•
•
•
To activate the loudspeaker while
in a call with the fold open, select
Loudsp..
To activate the loudspeaker when
answering a call with the fold
closed, press the voice key.
Answer a call with the
keypad locked
To deactivate the loudspeaker
during a call, with the fold open,
select Normal.
To answer a call with the keypad
locked, press the call key with the fold
open. To answer a call with the fold
closed and the keypad locked, press
and hold the voice key to answer with
the loudspeaker. During the call, all
features function as normal. When you
end or reject the call, the keypad
automatically relocks. See “Keyguard”,
p. 12.
The loudspeaker is deactivated
automatically when a call (or a call
attempt) ends or when certain
enhancements are connected.
Call options
Many of the options you can use
during a call are network services.
Check with your network operator for
more information.
When the keypad lock is on, calls still
may be possible to the official
emergency number programmed into
your device. Enter the emergency
number, and press the call key.
1. Select Options during a call to
display the following options:
Loudspeaker or Handset—Activate
or deactivate the loudspeaker
while in a call.
Loudspeaker
New call—Initiate a conference
call. See “Conference calling”,
p. 10.
Warning: Do not hold the
device near your ear when the
loudspeaker is in use, because
the volume may be extremely
loud.
Save—Save a number while in a call
to your contacts list. This option is
available only when entering
numbers during a call.
11
9243644_6155_en_au.fm Page 12 Wednesday, December 28, 2005 11:28 AM
S e t u p y o u r p h o n e
Add to contact—Add a phone
number to an existing contact in
your contacts list while in a call.
This option is available only when
entering numbers during a call.
Lock the keypad
Select Menu with the center selection
key; then press * within 2 seconds.
Unlock the keypad
Select Unlock with the center selection
key; then press * within 2 seconds.
End all calls—Disconnect from all
active calls.
Send DTMF—Enter the numbers,
and select Tones to send the
numbers as tones.
Contacts—View the contacts menu.
Menu—View the phone menu.
2. Select an option to activate the
option or enter its submenu.
■ Keyguard
With keyguard, you can lock the
keypad to prevent keys from being
pressed accidentally. The locked
keypad unlocks when you receive a
call. After the call, the lock
automatically reactivates.
With the keyguard on, calls still may be
possible to the official emergency
number programmed into your phone.
Enter the emergency number, and
press the call key.
12
9243644_6155_en_au.fm Page 13 Wednesday, December 28, 2005 11:28 AM
T e x t e n t r y
3. Text entry
You can use two methods for entering
text and numbers: standard mode and
Numbers (123)
To switch to 123 mode from Abc mode,
press and hold # at any message entry
screen to bring up the Editor settings.
Select Number mode, and the device
returns to the message entry screen
and switches the Abc icon in the upper
left corner of the display to the 123
icon (or back).
predictive text mode. Select Clear to
backspace the cursor and delete a
character. Select and hold Clear to
backspace continuously and delete
characters.
■ Standard mode
Standard mode is the only way to enter
text into the contacts list and to
rename caller groups.
Punctuation and special
characters
While at any text entry screen, press *
to display special characters (press and
hold * if predictive text is on). Press *
again to cycle through all available
characters. Scroll to navigate through
the list of special characters. With a
character highlighted, select Insert to
insert the character into your message.
Text (Abc)
•
Press a key once to insert the first
letter on the key, twice for the
second letter, etc. If you pause
briefly, the last letter in the display
is accepted and your device awaits
the next entry.
•
•
•
•
Press 0 to enter a space, thereby
accepting a completed word.
■ Predictive text mode
Much faster than the standard mode
method, predictive text input enables
you to write messages quickly using
your keypad and the built-in
Press 1 to insert a period into your
message.
Press * to display a complete list of
special characters.
dictionary. In predictive text mode,
your phone predicts the words as you
enter them.
Press and hold # to bring up the
Editor settings (Number mode,
Dictionary on or Dictionary off,
Writing language).
13
9243644_6155_en_au.fm Page 14 Wednesday, December 28, 2005 11:28 AM
T e x t e n t r y
Activate or deactivate
At any text entry screen, select
Options > Dictionary on to activate or
Dictionary off to deactivate.
■ Change case and
mode
Press # to switch between uppercase,
lowercase, and sentence case text. As
you press #, the following icons (not
the descriptions) appear in the upper
left of the display screen:.
Text entry
The following illustration shows your
text entry of the word Nokia in
Uppercase text: standard
predictive text mode. With the English mode is on.
dictionary selected, press each of the
Lowercase text: standard
mode is on.
following number keys once, and the
screen will display Nokia by predicting
the appropriate letter to use based on
your keypad entry:
Sentence case text: standard
mode is on. This option is available only
at the beginning of a sentence.
6
6
5
4
2
Note: You can press # within 2
seconds to switch between
standard mode and predictive
text mode.
•
•
Press 0 to enter a space, and begin
writing the next word.
Uppercase text: predictive
text is on.
If a displayed word is not correct,
press * to see other matches. To
return to the previous word in the
list of matches, select Prev.
Lowercase text: predictive
text is on.
•
If ? appears after a word, select
Spell to add the word to the
dictionary.
Sentence case text:
predictive text is on. This option is
available only at the beginning of a
sentence.
•
•
Press 1 to insert a period into your
message.
Press and hold * to display special
characters. Press * again to cycle
through all available characters.
14
9243644_6155_en_au.fm Page 15 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
4. Messages
If you have subscribed to a message
network service, you can send and
receive messages to compatible
phones also subscribed to a message
service. You can also send and receive
multimedia and e-mail messages if
supported by your network operator.
Also, you can make distribution lists
that contain phone numbers and
names from your contacts list.
Note: When you send a
message, your device may
display Message sent,
indicating your device has sent
the message to the message
center number programmed
into your device. This is not an
indication that the message
has been received at the
intended destination. For more
details about messaging
services, check with your
network operator.
See “Text entry”, p. 13.
When composing text or multimedia
messages, check the number of
characters allowed in the top right
corner of the message. Using Unicode
characters takes up more space. With
Unicode characters in your message,
the indicator may not show the
message length correctly. Before
sending the message, the phone tells
you if the message exceeds the
maximum length allowed for one
message.
■ Text messages
Compose and send
1. In standby mode, select Menu >
Messages > Text messages >
Create message.
To quickly access Create message,
scroll left in standby mode.
2. Compose and send a message using
the keypad.
Important: Exercise caution
opening messages. Messages
may contain malicious
software or otherwise be
harmful to your device or PC.
Depending on the messaging
service enabled, some or all of the
following options are available
while composing your message:
15
9243644_6155_en_au.fm Page 16 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
Sending options > Mark or
Unmark > Urgent, Delivery note,
Callback no., or Signature.
Select Sending options for a single
message. See “Change sending
options”, p. 20.
Dictionary on or Dictionary off—
Turn the predictive text on or off.
Matches—View matches in the
dictionary for the word you want to
use (only available with predictive
text on and when the same set of
key strokes can produce multiple
words).
Clear text—Erase all the text from
the message editor.
Insert Picture—
3. To send the message, select Send
to > Send to number, Send to
distrib. list (if a distribution list has
been created), Send to e-mail or
Send to many.
Insert contact—Insert a name from
your contacts list into your
message.
Insert number—Insert a phone
number or find a phone number in
the contacts list.
4. Enter the recipient’s phone number
or e-mail address or select Search
to retrieve a number or e-mail
address from your contacts list;
select OK.
Save—Select Drafts to save the
message in the drafts folder or
Templates to save the message as
one of your predefined templates
in the templates folder.
Read message
When you receive a message, a
Exit editor—Exits the message
editor.
notification message and
displayed.
are
Use template—Insert a predefined
1. Select Show to read the message or
Exit to dismiss the notification and
read the message later from your
inbox. See “View saved messages”,
p. 18.
template into your message.
Insert smiley—Insert a smiley into
your message.
Insert word or Edit word—Enter or
edit the text of a new word that
might not appear in the predictive
text dictionary (only available with
predictive text on).
2. Scroll up or down to view the
whole message, if necessary.
Insert symbol—Insert a special
character into your message (only
available with predictive text on).
16
9243644_6155_en_au.fm Page 17 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
you receive a message, select
Show.
Options
When reading a text message, select
Options to access some or all of the
following options:
2. Select Reply > Empty screen,
Original text, Template, or one of
the predefined answers; then
compose your reply using the
keypad.
Delete—Discard the message.
Use detail—Access the following three
options:
3. After creating the reply, select
Send. The sender’s phone number
or e-mail is used as the default.
Number—Uses or saves the number.
Select Options > Add to contact, Send
message, or Call.
E-mail address—Lists the e-mail
addresses included in the message
(available only if the message contains
an e-mail address). Select Save to save
the e-mail address as a new phone
book entry or Options > Add to contact
or Send message.
Templates
Templates are short, prewritten
messages you can recall and insert into
new text messages when you are short
on time.
1. In standby mode, select Menu >
Messages > Text messages >
Create message > Options > Use
template.
Web address—Displays if a URL is
included in the message.
Move—Move the message to Archive,
Templates, or a folder you have
created.
2. Select your desired template.
3. Select Send to > Send to number,
Send to many, or Send to distrib. list
(with a distribution list created).
Forward—Forward the message to
another phone number or e-mail
address.
4. Enter the recipient’s phone number
or e-mail address, or select Search
to retrieve a number or e-mail
address from your contacts list;
select Send.
Lock or Unlock—Lock or unlock the
message.
Rename—Edit the title of the message.
A distribution list only contains phone
numbers of recipients and is selected
from a list of predefined groups you
create.
Reply to message
1. In standby mode, select Menu >
Messages > Text messages > Inbox
and your desired message, or when
17
9243644_6155_en_au.fm Page 18 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
templates can be edited and
personalised.
Text message folders
Save messages
My folders—Allows you to organise
You can save drafts of messages or
your messages by creating custom
received messages to an existing folder
folders and saving some of your
or to a folder that you have created.
messages here. Select Options >
1. Open the received message or
Add folder, Rename folder, or
Delete folder to add a custom
folder or rename or delete a folder
create a new message, and select
Options.
2. To save a received message,
select Move > Templates or
Archive.
you have created.
You can only delete folders created
in my folders; the inbox, sent items,
archive, and templates folders are
protected. When deleting a folder,
you are also deleting all messages
in the folder.
3. To save the draft of a message you
have created, select Save > Drafts
or Templates.
View saved messages
1. In standby mode, select Menu >
Messages > Text messages.
Distribution lists—Stores created
distribution lists.
3. When the folder opens, select the
message you want to view.
2. Select the folder containing the
message you want to view:
Inbox—Automatically stores any
incoming messages.
Outbox—Stores messages that
have not been sent
Sent items—Stores messages that
have been sent.
Drafts—Stores messages created as
drafts.
Archive—Stores messages that you
choose to archive, includingunread
ones.
Templates—Stores pictures and
prewritten templates. Preloaded
18
9243644_6155_en_au.fm Page 19 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
Delete a single message
1. In standby mode, select Menu >
Messages > Text messages.
Distribution list
The distribution list enables you to
send messages to a group of contacts.
In standby mode, select Menu >
Messages > Text messages >
Distribution lists.
2. Select the folder containing the
message you want to delete.
3. Highlight the message you want to
delete.
To create a distribution list, select New
list with no list created or Options >
Create new list to create additional
lists. To populate your list, select Add
new and a contact from your contacts
list.
4. Select Options > Delete.
5. Select Yes to delete the message or
No to exit.
Delete all messages in a folder
1. In standby mode, select Menu >
Messages > Text messages >
Delete messages.
To use, rename, or modify a
distribution list, highlight the
distribution list; and select Options >
Send message, Rename list, Clear list,
or Delete list.
2. Select the messages you want to
delete:
All—Deletes all messages in all of
the folders.
Delete messages
If your message memory is full and you
have more messages waiting at the
network, No space for new text
messages appears in standby mode.
You can do the following:
All read—Deletes any messages
that have been read in all of the
folders.
All unread—Deletes any messages
that have not been read in all of
the folders.
•
Read some of the unread messages,
and delete them individually.
3. Select and Mark the folders that
•
Delete messages from some of your
folders.
have messages you want to delete:
Inbox—Deletes all messages from
the inbox folder.
Sent items—Deletes all messages
from the Sent items folder.
Outbox—Deletes all messages from
the outbox folder.
19
9243644_6155_en_au.fm Page 20 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
Drafts—Deletes all messages from
the drafts folder.
options, Mark or Unmark the setting
you want to change:
Archive—Deletes all messages from Urgent—Set the priority of the note as
the archive folder.
urgent.
User defined folders—Deletes all
messages from the user defined
folder.
Delivery note—Send a note to yourself
confirming delivery of the message.
Callback no.—Enter your desired phone
number to send to the recipient as a
callback number, and select OK.
4. Select Done > Yes to empty the
marked folder.
Signature—Create a signature to send
Change sending options
with text messages.
To change sending options for all
future text messages, in standby mode,
select Menu > Messages >
Text messages > Message settings >
Sending options and the setting you
want to change:
Change other settings
In standby mode, select Menu >
Messages > Text messages > Message
settings > Other settings and the
setting you want to change:
Priority > Normal or Urgent —Set the
priority of a note.
Message font size > Small font or
Large font.
Delivery note > On or Off—Send a note
to yourself confirming delivery of the
message.
Message overwriting >Sent itemsonly,
Inbox only, S. items & Inbox, or Off.
Note: When the message
memory is full, your phone
cannot send or receive any
new messages. To free up the
memory, you can select
Message overwriting to make
your phone automatically
replace old messages in the
inbox and sent items folders
when new ones arrive.
Send callback number—Send a callback
number to the recipient. Select Off or
enter your desired phone number to
send to the recipient as a callback
number, and select OK.
Signature—Select On to create a
signature to send with text messages
or Off to turn this feature off.
To change sending options for one
message, in standby mode, select
Menu > Messages > Text messages >
Create message > Options > Sending
Save sent messages > Always save,
Always prompt, or Off.
20
9243644_6155_en_au.fm Page 21 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
Queue msgs. when digital
unavailable > On, On prompt, or Off.
Messages are stored in the outbox
until they can be sent with digital
service.
Copyright protections may prevent
some images, ringing tones, and other
content from being copied, modified,
transferred, or forwarded. This
function is only available if supported
by your service provider or network
operator. For availability and a
subscription to the multimedia
messaging service, contact your
service provider or network operator.
■ Multimedia messages
A multimedia message (MMS) can
contain text, sound, a picture, and a
video clip. Your device supports
Note: Only devices that offer
compatible multimedia
message features can receive
and display multimedia
messages. Multimedia
multimedia messages up to 300 KB.
With the maximum size exceeded, the
device may not be able to receive the
message. Depending on your network,
you may receive a message that
message objects may contain
viruses or otherwise be
includes an Internet address where you
can go to view the multimedia
harmful to your device or PC.
Do not open any attachment if
unsure of the sender’s
message. Pictures are scaled to fit the
display area of the device. Your device
has a multimedia message viewer for
playing messages and a multimedia
folder for storing saved messages.
When you save the multimedia
trustworthiness.
message, you can use the image as a
screen saver or the sound as a ringing
tone unless protected by copyright.
The appearance of a multimedia
message may vary depending on the
receiving device.
Important: Exercise caution
when opening messages.
Messages may contain
viruses or otherwise be
harmful to your device or PC.
21
9243644_6155_en_au.fm Page 22 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
Multimedia messaging supports the
following formats:
MMS settings
Before you can use the multimedia
message feature, you must specify
whether you want to receive message
at all times or only if you are in your
wireless service provider’s or network
operator’s home system. This is a
network service. Check with your
service provider for more information.
•
Picture: JPEG, GIF, animated GIF,
WBMP, BMP, and PNG
•
Sound: SP-MIDI, AAC, AMR audio,
QCELP, monophonic and
polyphonic ringing tones
•
Video: clips in H.263 or MPEG4
format with SubQCIF image size
and AMR or QCELP audio
The default setting of the multimedia
message service is on. The appearance
of a multimedia message may vary
depending on the receiving device.
If a received message contains
unsupported elements, these elements
may be replaced with Object format
not supported.
You cannot receive multimedia
messages if you have a call in progress
or an active browsing session. Because
delivery of multimedia mesages can
fail for a variety of reasons, do not rely
solely upon them for essential
communications.
You can receive MMS notifications at
anytime; whether you can retrieve
MMS depends, as shown in the
following:
•
While in a call or an active
browsing session, you cannot
retrieve multimedia messages.
Allow or block multimedia
reception
You can choose to receive all
messages, block all messages, or
receive messages only when you are in
the network operator’s home network.
In standby mode, select Menu >
Messages > Multimedia messages >
Message settings > Allow multimedia
reception and one of the following:
•
While in a stand-alone application
such as a game or calendar instead
of a browser or voice call, you can
retrieve multimedia messages.
Yes—Allow all incoming messages.
22
9243644_6155_en_au.fm Page 23 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
In home network—Allow incoming
Other MMS settings
messages only if you are in the
network operator’s home system.
This is a network service. Check with
your network operator for more
information.
Other multimedia settings include
saving your messages to Sent items.
In standby mode, select Menu >
Messages > Multimedia messages >
Message settings and one of the
following:
No—Block all incoming messages.
Save sent messages—Select Yes to save
sent multimedia messages to the Sent
items folder or No to discard.
Retrieve or reject multimedia
messages
This setting is unavailable with
multimedia reception blocked.
In standby mode, select Menu >
Messages > Multimedia messages >
Message settings > Incoming multi-
media messages and one of the
following options:
Delivery reports—Select On to be
informed if the message was delivered
or Off to not be informed.
Scale image down—Select Yes or No to
define whether to scale image down.
Default slide timing—Set the default
time in mm:ss format for each slide in
an MMS to remain on the screen.
Retrieve—Automatically retrieve all
messages to your inbox.
Retrieve manually—Enable choosing
from a notification whether to retrieve
a message waiting on the network.
MMS folders
To use and arrange messages, select
Messages > Multimedia messages and
one of the following:
Reject—Reject incoming multimedia
messages.
Inbox—Contains received multimedia
When you receive messages,
Multimedia message received is
displayed.
messages.
Outbox—Contains multimedia
messages which you have sent and are
still waiting to be transmitted, or failed
to be sent out.
Allow or block advertisements
This setting is unavailable with
multimedia reception blocked.
In standby mode, select Menu >
Messages > Multimedia messages >
Message settings > Allow
Sent items—Contains sent multimedia
messages.
Saved items—Contains saved
multimedia messages that you can
send later.
advertisements > Yes or No.
23
9243644_6155_en_au.fm Page 24 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
Delete messages—Deletes messages in
the Inbox, Outbox, Sent items, or Saved
items folder.
Each slide can contain text, one
image, and one sound clip. If the
message contains several slides, to
open the desired slide, select
Previous slide, Next slide, or Slide
list.
Write and send multimedia
messages
1. In standby mode, select Menu >
Messages > Multimedia
You can also add business cards
and calendar notes.
messages > Create message.
5. To set the time interval between
the slides, select Options >Slide
timing. Enter the time interval in
mm:ss format, and select OK.
2. Enter your message text, and select
Options > Insert > Image, Sound
clip, New sound clip, Video clip,
Slide, Business card, or Calendar
note. The list of available folders in
the Gallery is displayed.
6. To move the text to the top or
bottom of the message, select
Options > Place text first or Place
text last (default).
Select Business card to display your
contact lists; select Calendar note
to show the calendar.
7. To insert a name from contacts,
select Options > More options >
Insert contact and the desired
name.
3. Open the desired folder; scroll to
the image, sound clip, or video clip;
and select Options > Insert.
8. To insert a number, select
Options > More options > Insert
number.
The indicator in the message
header shows the available
memory size left for the message.
9. Enter the number or search for it in
Copyright protections may prevent
some images, ringing tones, and
other content from being copied,
modified, transferred, or
contacts, and select OK.
10. To insert a calendar note, select
Options > Insert > Calendar note.
forwarded.
11. To insert a business card, select
Options > Insert > Business card.
4. To add a new page or slide to the
message, select Options > Insert >
Slide. This applies only if there is no
video clip in the message
12. To delete an image, slide, video clip,
or sound clip from the message,
select Options > Delete > Image,
Sound clip, Video clip, or Slide.
24
9243644_6155_en_au.fm Page 25 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
13. To add a subject to the message,
select Options > More options >
Edit subject, enter a subject, and
select OK.
Note: When sending
messages, your device may
display Multimedia message
sent, indicating that the
message has been sent to the
message center number
14. To view the message or slide
presentation before sending it,
select Options > Preview.
programmed into your device.
This is not an indication that
the message has been received
at the intended destination.
For more details about
15. To save the message to Saved
items, select Options > Save.
16. To send the message, select Send
to > Phone number, E-mail
address, or Many.
messaging services, check with
your network operator.
17. Enter the recipient’s number or e-
mail address, or search for it in
contacts; select OK. The message is
moved to the outbox folder to be
sent.
Sent messages are saved in the sent
items folder if you set Save sent
messages to Yes. See “Other MMS
settings”, p. 23. This is not an
indication that the message has been
received at the intended destination.
It takes more time to send a
multimedia message than a text
message. While sending the
multimedia message, your device
Read multimedia messages
When a multimedia message is being
received,
appears animated in the
displays the animated indicator
,
display along with the percentage
display indicating the receiving
progress. With the message fully
and you can use other functions on the
device. If there is an interruption while
sending the message, the device
automatically tries to resend it a few
times. If this fails, the message remains
in the outbox folder, and you can try to
manually resend it later. Check your
outbox folder for unsent messages.
downloaded,
appears in the
display, showing the number of
messages received (with the light
indicator blinking near the bottom of
your antenna).
•
To view the message immediately,
select Show.
•
To view a saved message, select
Menu > Messages > Multimedia
25
9243644_6155_en_au.fm Page 26 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
messages > Saved items, and scroll
to view the message.
Reply to multimedia message
Select Reply or Reply to all to enter a
reply and send it to the original sender
and any other message recipients.
While viewing the message, select Play
to view the entire MMS or Options and
one of the following:
■ Voice messages
View text—View only the text included
in the message.
If you subscribe to voice mail, your
network operator will furnish you with
a voice mailbox number. You need to
save this number to your device to use
voice mail. When you receive a voice
message, your device beeps, displays a
message, or both. If you receive more
than one voice message, your device
shows the number of voice messages
received.
Use detail—
Send to-
Edit Message-
Open image, Open sound clip, or Open
video clip—View or listen to the
corresponding file.
Delete message—Delete the message
you are viewing.
Message details—View the sender’s
name and phone number, the message
center used, reception date and time,
and message size and type.
Save voice mailbox number
Your network operator may have
already saved your voice mailbox
number to your device. Select OK to
leave the number unchanged.
Save image, Save sound clip, or Save
video clip—Save the file to the Gallery.
You must open images, sound clips,
and video clips before you can save
them.
1. In standby mode, select Menu >
Messages > Voice messages >
Voice mailbox number. The voice
mailbox number is displayed.
If
blinks and Multimedia me-mory
2. If the box is empty, enter the voice
mailbox area code and number,
and select OK.
full. view waiting msg. is displayed,
memory for multimedia messages is
full. To view the waiting message,
select Show. Before you can save the
message, delete some of your old
messages. See “Delete messages”,
p. 19.
Call and setup voice mail
1. After you save the voice mailbox
number, in standby mode,
press and hold 1.
26
9243644_6155_en_au.fm Page 27 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
2. When you connect to voice mail
Write down voice mailbox
and the prerecorded greeting
begins, follow the automated
instructions to setup voice mail.
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
Listen to voice messages
After you set up voice mail, in standby
mode, press and hold 1; or select
Menu > Messages > Voice messages >
Listen to voice messages to dial the
voice mailbox number. When you
connect and the prerecorded greeting
begins, follow the automated
instructions to listen to your voice
messages.
3. Write down your interaction with
the recorded promptsstep-by-step.
Keep in mind that each voice mail
service may vary. However, it
should look similar to the following
example:
Dial 8585551212, pause 5 seconds,
press 1, pause 2 seconds, press
1234, and press #.
Phone numbers with
Automate voice mail
dialling codes
You can insert specialcharacters called
dialling codes into phone numbers
such as voice mail, and save the
number to a speed dials location.
Dialling codes instruct the receiving
system to pause, wait, bypass, or
accept the numbers that follow them
in the dialling string. See “Phone
numbers with dialling codes”, p. 27.
Dialling codes instruct the receiving
system to pause, wait, bypass, or
accept the numbers that follow them
in the dialling string. To set up dialling
codes, do the following:
1. In standby mode, select Menu >
Contacts > speed dials.
2. Scroll to an (empty) speed dials
slot, and select Assign.
Voice mail services vary by network
operator. The following instructions
are examples of common operations.
Please check with your network
operator for specific instructions on
using your voice mail service.
3. Enter your mailbox phone number,
including the area code.
Note: If the standard
Telecom New Zealand
mailbox number 083210 is
used, the area code is not
necessary..
27
9243644_6155_en_au.fm Page 28 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
4. Enter any dialling codes as
necessary after the entered phone
number.
w—Waits for you to press the call key
before sending the numbers or codes
that follow.
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice (two times 2.5
seconds) after the voice mailbox
number: 2145551212pp.
Clear voice mail icon
To clear the voice mail icon from the
display, in standby mode, select
Menu > Messages > Voice messages >
Clear voice message icon.
5. Enter any remaining pauses or
other information that enables you
to listen to your messages, and
select OK.
■ Web messaging
Web messaging is a network service.
See “Network services”, p. viii.
6. Enter a name (such as voice mail),
and select OK.
If your network operator supports this
feature, you can use the minibrowser
to check for e-mail messages.
In standby mode, select Menu >
Messages > Minibrowser messages >
Connect.
To dial and listen to your voice mail,
press and hold the assigned speed dials
key in standby mode.
Insert dialling codes
After having entered your desired
phone number, press * repeatedly to
cycle through dialling codes. When the
desired code appears in the display,
pause briefly and the code is inserted
into the dialling string.
The following dialling codes are
available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before
sending any numbers that follow.
+—Replaced by the international
access code.
28
9243644_6155_en_au.fm Page 29 Wednesday, December 28, 2005 11:28 AM
C a l l r e g i s t e r
5. Call register
Call register stores information about
your last 30 missed, received, and
dialled calls respectively and adds the
total duration of all calls. When the
number of calls exceeds the maximum,
the most recent call replaces the
oldest.
■ View missed calls
The missed calls feature does not
function with your device switched off.
Missed calls are calls you have never
answered. To view missed calls, do the
following:
In standby mode, select Menu > Call
register > Missed calls, or with missed
call notification displayed, select List.
Whether viewing missed, received, or
dialled calls, select Options to access
these menu options:
Scroll to a name or number, and select
Options.
Time of call—Displays the date and
time of the call.
Select an option to view or activate.
Send message—Sends a message to the
number.
■ View received calls
Use number—Edits the number and
associates a name with the number.
Received calls are calls that have been
answered.
Save—Enters a name for the number
and saves it to your contacts list.
In standby mode, select Menu > Call
register > Received calls.
Add to contact—Adds a number to a
contact and saves it to your contacts
list (available only with the number
not yet stored in your contacts list).
Scroll to a name or number, and select
Options.
Select an option to view or activate.
Delete—Clears the number from
memory.
Call—Calls the number.
29
9243644_6155_en_au.fm Page 30 Wednesday, December 28, 2005 11:28 AM
C a l l r e g i s t e r
■ View dialled numbers ■ Delete call registers
Dialled calls are previous numbers you You can delete any missed, dialled, or
have dialled from your device.
received calls from your device
memory.
In standby mode, press the call key, or
select Menu > Call register > Dialled
numbers.
In standby mode, select Menu > Call
register > Delete recent calls.
Scroll to a name or number, and select Select the call type you want to clear:
Options.
All, Missed, Received, or Dialled.
Select an option to view or activate.
■ Call duration
View call times
Contact your network operator for the
actual calls and services invoice, which
may vary depending on network
features, rounding off for billing, taxes,
and so forth.
You can make or receive calls to or
from the same number and view up to
five calls displayed with the time each
call occurred. Your device clock must
be set for this feature to work
accurately.
Select Menu > Call register > Call
duration to view the duration of your
last call, all your dialled calls, all your
received calls, all your calls, your life
timer, or to clear your timers. After you
select Clear timers, enter your lock
code, and select OK. See “Change lock
code”, p. 61.
In standby mode, select Menu > Call
register > Missed calls, Received calls,
or Dialled numbers.
Highlight your desired name or
number, and select Options > Time of
call.
Note: All call duration, except
the life timer, are reset to zero
with Clear timers selected.
Scroll down to view the call times from
this number; select Back to return to
the options list.
Note: Some timers, including
the life timer, may be reset
during service or software
upgrades.
30
9243644_6155_en_au.fm Page 31 Wednesday, December 28, 2005 11:28 AM
C a l l r e g i s t e r
Last received data/fax—View the size
To activate the call times on the
display screen, in standby mode, select (KB) of the last received data or fax
Menu > Call register > Call duration > call.
Last call duration > Show call time on
display > On.
All sent data/fax—View the size (KB) of
all sent data and fax calls.
To activate the call timer in standby
mode while in a call, select Details >
Show call time on display > On or Off.
All received data/fax—View the size
(KB) of all received data and fax calls.
Duration of last data/fax call—View the
duration time of the last data or fax
To view the duration of dialled or
received calls placed while in the home
call.
network or while roaming, select
Duration of all data/fax calls—View the
Details > Home or Roaming.
duration time of all calls.
Clear all data/fax registers > OK >
■ Data and fax call
Yes—Clear all data or fax logs.
duration
Data and fax calls are a network
■ Minibrowser duration
Minibrowser is a network service.
See “Network services”, p. viii. If your
service. See “Network services”, p. viii.
If your network operator supports this
feature, you can view the size or
network operator supportsthis feature,
duration of sent or received data and
you can view the size or duration of
fax calls.
sent or received data from the
Note: The actual time invoiced
minibrowser.
for calls and services by your
network operator may vary,
depending on network
Note: The actual time invoiced
for calls and services by your
network operator may vary,
features, rounding off for
depending on network
features, rounding off for
billing, taxes, and so forth.
billing, taxes, and so forth.
In standby mode, select Menu > Call
register > Data/fax calls and one of the
following options:
In standby mode, select Menu > Call
register > Minibrowser calls and one of
the following options:
Last sent data/fax— View the size (KB)
of the last sent data or fax call.
Last sent browser data—View the size
(KB) of the last sent browser data.
31
9243644_6155_en_au.fm Page 32 Wednesday, December 28, 2005 11:28 AM
C a l l r e g i s t e r
Last received browser data—View the
size (KB) of the last received data.
All sent browser data—View the size
(KB) of all sent browser data.
All received browser data—View the
size (KB) of all received browser data.
Last browser session—View the
duration time of the last browser
session.
All browser sessions—View the
duration time of all browser sessions.
Clear all browser registers > OK > Yes
—Clear all browser registers.
32
9243644_6155_en_au.fm Page 33 Wednesday, December 28, 2005 11:28 AM
C o n t a c t s
6. Contacts
The contacts list can hold up to 500
contacts with multiple numbers and
Save an entry
1. In standby mode, select Menu >
Contacts > Names > Options >
Add new.
text notes for each contact. The
amount of numbers and text entries
you can save may vary, depending on
the length and total number of entries
in the contacts list.
2. Enter the name, and select OK.
3. Enter the phone number, and select
OK > Back.
■ Add new contacts
Save numbers and
text items
To access the contacts list in standby
mode, press the right selection key, or
select Menu > Contacts > Names if
the right selection key on your device
has a network operator menu.
You can save different types of phone
numbers and short text items per name
to the contacts list. The first number
you save for any entry is automatically
set as the default number, which you
can always change.
Save contact name
and number
1. In standby mode, scroll down to
display your contacts list, and
highlight the entry to which you
want to add a phone number or
text item.
1. In standby mode, enter the phone
number you want to save.
2. Select Save.
3. Enter the name, and select OK.
2. Select Details > Options > Add
detail > Number (General, Mobile,
Home, Office, or Fax), E-mail
address, Web address, Postal
address, Note, Image, or Tone.
Save contact number only
1. In standby mode, enter the phone
number you want to save.
2. Select and hold Options.
3. Enter the number or text for the
type you have selected, and select
OK.
33
9243644_6155_en_au.fm Page 34 Wednesday, December 28, 2005 11:28 AM
C o n t a c t s
4. To change a number type, highlight
the number, and select Options >
Change type > General, Mobile,
Home, Office, or Fax.
display the following caller group
options:
Group name > Rename group—
Rename the group to your
preference.
Change default number
Group ringing tone—Set the ringing
You can also change which phone
number is the default (primary)
number for the contact entry.
tone for the group.
Group logo > On, Off, or View—Set
the graphic for the caller group.
1. In standby mode, scroll down to
select the contact entry you want
to change, and select Details.
Group members—Add or remove
members from the caller group.
2. Scroll to the number you want to
set as default, and select Options >
Set as default.
Set up speed dials
You can associate any entry in the
contacts list with a key from 2–9.
To dial those entries, press and hold
the assigned key. See “Speed dials”,
p. 52 to activate or deactivate
speed dials.
Caller groups
You can add contacts list entries to any
of five caller groups, and assign a
unique ringing tone or graphic to that
group. This enables you to identify
callers from the group by their unique
ringing tone or graphic.
Assign a key to speed dials
1. In standby mode, select Menu >
Contacts > Speed dials.
2. Scroll to an (empty) speed dials
1. To assign an entry in your contacts
list to a caller group, select your
desired contact entry, and select
Options > Caller groups > Family,
VIP, Friends, Business, Other,
or No group.
slot, and select Assign.
3. Enter the number and a name for
the number, or select Search to
retrieve a number from the
contacts list; select Select.
2. To manage your caller groups,
in standby mode, select Menu >
Contacts > Caller groups > Family,
VIP, Friends, Business, or Other to
If speed dials is off, the device
displays a prompt and asks if you
want to turn speed dials on.
4. Select Yes to activate speed dials.
34
9243644_6155_en_au.fm Page 35 Wednesday, December 28, 2005 11:28 AM
C o n t a c t s
•
Very short names are not accepted.
Use long names and avoid similar
names for different numbers.
Change speed dials numbers
1. In standby mode, select Menu >
Contacts > Speed dials.
Note: Using voice tags may be
difficult in a noisy
environment or during an
emergency, so you should not
rely on voice dialling in all
circumstances.
2. Scroll to the speed dials entry you
want to change, and select
Options > Change.
3. Enter the new number and a name
for the entry, or select Search to
retrieve a number from the
contacts list; select Select.
Assign a voice tag to
an entry
Before you can use voice dialling,
you must first assign a voice tag to the
number.
Delete speed dials numbers
1. In standby mode, select Menu >
Contacts > Speed dials.
2. Scroll to the speed dials entry you
want to delete, and select
1. In standby mode, scroll to the entry
in your contacts list to which you
want to assign a voice tag.
Options > Delete > Yes.
■ Voice tags
You can dial up to 25 stored numbers
using voice dialling.
2. Select Details > Options >
Add voice tag > Start.
3. Speak clearly into the microphone.
Do not select Quit unless you want
to cancel the recording. The device
automatically stops recording, and
saves and replays the voice tag.
Before using voice tags, note the
following:
•
Voice tags are not language-
dependent. They depend on the
speaker’s voice.
appears next to commands that
have voice tags assigned.
•
•
You must say the name exactly as
you said it when you recorded it.
Voice tags are sensitive to
background noise. Record voice
tags, and use them in a quiet
environment.
35
9243644_6155_en_au.fm Page 36 Wednesday, December 28, 2005 11:28 AM
C o n t a c t s
Dial a number
■ Edit contacts list
entries
1. In standby mode, press and hold
the right selection key with the fold
open, or press and hold the voice
key regardless of the fold being
open or closed.
1. In standby mode, select Menu >
Contacts > Names, and scroll to
the entry you want to edit in your
contacts list.
2. When you hear several beeps and
2. Select Details > Options and one of
the following options, which may
vary depending on whether you are
editing a contact listed by phone
number or contact name:
Speak now appears, release the key.
3. Pronounce the voice tag clearly
into the microphone.
When the device finds the voice
tag, Found: appears, and the device
automatically dials the number. If
the device does not locate a
number or recognise the voice tag,
No match found appears.
View—View the phone number of
the contact.
Add detail—Add more details to the
contact: Name (only available with
no name added), Number (General,
Mobile, Home, Office, or Fax),
E-mail address, Web address,
Postal address, Note, Image (only
available with no image added), or
Tone.
Voice tags
1. After you have associated a voice
tag to a contact, select Menu >
Contacts > Voice tags and your
desired voice tag entry.
Edit name, Edit number, Edit detail,
or Change image—Edit an existing
contact name, phone number,
details, or image attached to the
contact.
2. Select Playback, Change, or Delete.
Delete—Delete more details (Delete
number, Delete detail, or Delete
image) or the entire contact entry
(Delete contact) of the contact.
Send message—Create and send
the contact a text message or
multimedia message.
36
9243644_6155_en_au.fm Page 37 Wednesday, December 28, 2005 11:28 AM
C o n t a c t s
Use number—Use or save the
■ Access the contacts
number (available when you select
a contact listed with a contact
name). Select Options to use the
number.
menu
1. In standby mode, select Menu >
Contacts and one of the following
options:
Set as default—Change the default
number of the contact.
Names—View the entries in your
contacts list, and select Details or
Options > Search, Add new, or
Delete contact for your selected
entry.
Change type > General, Mobile,
Home, Office, or Fax—Change the
number type.
Add voice tag or Voice tag—Add a
voice tag to the contact with no
voice tag assigned, or select
Playback, Change, or Delete with a
voice tag assigned.
Settings—Change the contacts list
view or check the memory status of
your device.
Caller groups—View and edit the
properties of any of the caller
groups on the device.
Send bus. card—Send the contact
as a business card to another
device.
Voice tags—Listen to, modify, or
delete a voice tag to a contact in
the contacts list.
Caller groups—Add the contact to
an existing caller group.
Speed dials—View or modify the list
of speed dials numbers.
Speed dials—Add the contact to
your speed dials list.
My number—View your own phone
number.
3. Edit the option to your preference,
and select OK.
Delete all contacts—Delete all
entries in your contacts list.
■ Delete contacts
2. Select an option to activate the
feature or access its submenu.
entries
To delete all entries in your contacts
list, in standby mode, select Menu >
Contacts > Delete all contacts.
37
9243644_6155_en_au.fm Page 38 Wednesday, December 28, 2005 11:28 AM
C o n t a c t s
Search for a name
1. In standby mode, scroll down to
display the contents of your
contacts list.
■ Send and receive
contacts
You can send and receive an entry in
your contacts list using text
messaging, if supported by your
network operator.
2. Press the key corresponding to the
first letter of the name for which
you are searching.
Send a business card
You can send a business card as a text
message to a compatible phone or
other handheld device.
3. Scroll to select a contact, and
select Details to view the details.
Configure settings
1. Highlight your desired entry from
your contacts list, and select
Details > Options > Send bus.
card > Via multimedia, Via text
message or Via infrared. Default
number and All details options
appear only if you have more than
one number or detail saved to the
contact entry.
You can select how the contacts
appear in your contacts list and view
the amount of memory used or
available in your device. In standby
mode, select Menu > Contacts >
Settings > Scrolling view to change
view of name list or Memory status to
view the device memory used and
remaining.
2. Enter the number for your
recipient, or select Search to
retrieve a number from your
contacts list.
3. Select OK and the business card is
sent.
38
9243644_6155_en_au.fm Page 39 Wednesday, December 28, 2005 11:28 AM
C a m e r a
7. Camera
You can take photos and record video
clips with the built-in 1.0 megapixel
camera. The camera lens is on the front
of the device. The camera produces
photos in JPEG format and video clips
in H.263 (SubQCIF) format.
■ Take a photo
You can take a photo with the fold
open or take self portraits with the fold
closed.
1. In standby mode, press the camera
key to activate the camera, or with
the fold open, select Menu >
Camera.
When using the features in this device,
please follow local laws and respect
privacy rights and additional rights of
other people.
2. Select Capture to take the photo.
When taking a photo, a shutter
sound is heard, the photo displays
on the screen, and either a blinking
icon or scrolling indicator displays
as the photo is saved to the Images
folder of Gallery.
After you take a picture or video, you
can attach it to a multimedia message,
send it with MMS, save it as a
wallpaper, save it on a compatible PC
using Nokia PC Suite software. When
you attach a picture to an entry in your
list of contacts, the picture is displayed
when the contact calls you.
To change the camera mode from
still image to video, or video to still
image, select Options and the
mode you want.
If there is not enough memory to take
a new photo, delete old photos or other
files in the Gallery.
3. Select Back to take another photo
or Options and choose from one of
the following:
Video—Change from still image to
video.
Zoom—Zoom in closer before
capturing a photo or get a closer
look at the captured photo; use the
scroll key to navigate around the
photo.
39
9243644_6155_en_au.fm Page 40 Wednesday, December 28, 2005 11:28 AM
C a m e r a
Night mode on or Night mode off—
Set as s. saver—Use a captured
Turn night mode on or off.
photo as a screen saver.
New image—Select to capture a
new photo.
Details—View the Name, Size,
Created, Format, Resolution, or
Copyright of a captured photo.
Flash switched on or Flash switched
off—Turn the flash on or off.
Record a video clip
You can record a video clip up to 12
frames per second (FPS).
Self-timer on—Use the self-timer
to delay capturing a photo for 10
seconds, or set to Self-timer off.
1. In standby mode, select Menu >
Camera > Options > Video >
Img. sequence on—Take a series of
six pictures in sequence, or set to
-Img. sequence off.
Record. While you are recording,
the recording indicator and the
remaining recording time display.
Open Gallery —Open gallery to view
saved images, videos, and
recordings.
2. Select Pause to pause the
recording, Continue to resume the
recording, or Stop to stop the
recording. The device saves the
recording in the video clip folder in
gallery.
Settings—Select options in Image
quality, Video clip quality, Video
clip length, Camera sounds, Self-
timer lights, Default title, Image
and video storage, or Default mode.
3. Select Back to record another video
or select Options and one of the
following:
View previous—View the previous
photo.
Send > Via multimedia or Via
infrared—Send a photo to a
compatible device or PC.
Still image—Go back to standard
photo mode.
Zoom—Zoom in closer before
recording a video or get a closer
look at the recorded video; Scroll to
navigate around the photo.
Attach to contact—Attach an
image to a contact in Names.
Rename—Enter or edit the name of
the captured photo, and select OK.
Mute audio or Unmute—Turn the
sound on or off.
Set contrast—Scroll to adjust the
contrast of the captured photo.
New video clip—
Set as wallpaper—Use a captured
photo for wallpaper.
Set as screen saver—
40
9243644_6155_en_au.fm Page 41 Wednesday, December 28, 2005 11:28 AM
C a m e r a
Flash on/Flash off—Turn the flash
on or off.
Settings
In standby mode, select Menu >
View previous—
Camera >Options >Settings tochange
the settings in the camera mode.
Select one of the following options:
Open Gallery—Go to the video clip
folder of the gallery menu.
Image quality—Define file compression
when saving the image. Select High,
Normal, or Basic. High uses the least
file compression and provides the best
image quality but takes more memory.
Settings—Select options in Image
quality, Video clip quality , Video
clip length, Camera sounds, Self-
timer lights, Default title, Image
and video storage, or Default mode.
Delete—Delete the video clip.
Video clip quality—Define the quality
of a video clip. Select High, Medium, or
Low.
Send—Send the video clip to
another device as a multimedia
message or use IR connectivity.
Video clip length—Select Default (15
seconds) or Maximum (2.5 minutes
depending on conditions). Only video
clips that are default length or shorter
can be sent in a multimedia message.
Rename—Rename the video clip.
Set contrast—Scroll to increase or
decrease contrast of the selected
video.
Default title—Select Automatic to use
a predefined title orMy title to key in or
edit a new title.
Details—View details of the
selected video, such as name, size,
time and date created, length, file
format, and copyright information. Image and video storage—Select the
folder for image storage.
Self-timer
Camera sounds >On or Off—Set
camera sounds.
In standby mode, select Menu >
Camera >Options >Self-timer on to
set a timer and delay capturing a photo
for 10 seconds. Select Start when a
beep sounds. The self-timer runs and
beeps faster when the camera is about
to capture the photo. After the
timeout, the camera takes the photo
and saves it in the images folder of the
gallery menu.
Self-timer lights > On or Off—Set self-
timer lights.
41
9243644_6155_en_au.fm Page 42 Wednesday, December 28, 2005 11:28 AM
G a l l e r y
8. Gallery
You can save pictures, video clips,
Your device has about 14 MB of
recordings, and ringing tones to folders memory for storing files in the Gallery.
in the Gallery and add new folders as
well. You can download images and
tones using MMS, SMS, via infrared,
mobile Internet sites, or Nokia PC
Suite.
This memory is not shared with other
functions, such as contacts. If the
device displays a message that the
memory is full, delete some existing
files before proceeding.
Note: Only compatible devices
offering compatible
multimedia message features
can receive and display
multimedia messages.
■ Folders
1. In standby mode, select Menu >
Gallery > Images, Video clips,
Graphics, Tones, Recordings,
Your device supports a digital rights
management system to protect
content you have acquired. Content
such as a ringing tone, can be
Themes, or a user-created folder.
2. Select Open to view a list of the
files in the folder or Options to
access the following:
protected and associated with certain
usage rules, for example, the number
of usage times or a certain usage
period. Usage rules are defined in the
content activation key that can be
delivered with the content or delivered
separately, depending on your network
operator. You may be able to update
the activation key. Always check the
delivery terms of any content and
activation key before acquiring them,
as they may be subject to a fee.
Delete folder —Delete a folder you
have created. You cannot delete a
preset folder.
Move—Move the selected folder
into another folder. After selecting
Move, scroll to another folder, and
select Move to. You cannot move a
preset folder.
Rename folder—Rename a folder
you have created. You cannot
rename a preset folder.
Copyright protection may prevent
some images, ringing tones, and other
content from being copied, modified,
transferred, or forwarded.
Details—Show the name, size, and
date of creation of the selected
folder.
42
9243644_6155_en_au.fm Page 43 Wednesday, December 28, 2005 11:28 AM
G a l l e r y
Type of view > List with details, List,
or Grid—Determine how to display
the folders and files within them.
Sort—Sort the contents of the
selected folder by name, date,
format, or size.
Add folder—Create a new folder.
Memory status—Check the
available memory for the device
handset.
Activation key list—View the list of
available activation keys. You can
delete activation keys if desired.
43
9243644_6155_en_au.fm Page 44 Wednesday, December 28, 2005 11:28 AM
M e d i a
9. Media
Turn the radio on and off
1. Connect the phone to a compatible
■ Radio
Your phone has an FM radio that also
functions as an alarm clock radio.
To listen to the FM radio on your
phone, connect a compatible music
stand, a 2.5 mm headset, or stereo
headset to the connector on the
bottom of the phone. The FM radio
uses the wire of the headset as an
antenna. A compatible headset needs
to be attached to the device for the FM
radio to function properly.The quality
of a radio broadcast depends on
coverage of the radio station in that
particular area.
headset or music stand.
2. In standby mode, select Menu >
Media > Radio. The channel
location number, the name of the
radio channel (if you have saved
the channel), and the frequency of
the radio channel are displayed.
To use the graphical keys
,
,
, or on the display, scroll
left or right to the desired key, and
select it.
3. If you have already saved radio
channels, select
or
to
Warning: Listen to music at a
moderate level. Continuous
exposure to high volume may
damage your hearing. Do not
hold the device near your ear
when the loudspeaker is in
use, because the volume may
be extremely loud.
scroll to the channel you would like
to listen to.
To select a radio channel location,
briefly press the corresponding
number keys.
4. To turn off the radio, select
Options > Switch off. A long press
on of the end key also turns the
radio off.
44
9243644_6155_en_au.fm Page 45 Wednesday, December 28, 2005 11:28 AM
M e d i a
Options
With the radio on, select Options and
one of the following:
Tune and save a radio channel
You can save a preset station to any
one of 20 locations in memory.
Switch off—Turn off the radio.
1. When the radio is on, select
to change the radio frequency
in 0.1 MHz steps, or select and hold
or
Save channel—Save the current station
to one of 20 locations (only available
with a new station entered).
or
to start the channel
search. Searching stops when a
channel is found.
Channels—Scroll up or down to select
a channel from 20 locations. WIth an
existing channel highlighted, select
Options > Delete channel or Rename
to delete or rename the saved channel.
2. To save the channel, select
Options > Save channel.
To save the channel to a memory
location 1 to 9, press and hold the
corresponding number key while
the radio is playing. To save the
channel in the memory location
from 10 to 20, press briefly 1 or 2
and the desired number key 0 to 9.
Mono output or Stereo output—Listen
to the radio in monaural mode
(default) or in stereo. Stereo output is
available through a stereo
enhancement.
Loudspeaker or Headset—Listen to the
radio through the speakerphone or
through the headset.
3. Enter a name for the channel, and
select OK.
4. Select an (empty) location to save
Set frequency—Manually enter the
frequency of a known radio station.
the channel.
To set the radio frequency, press * and
use the keypad to enter the frequency
of a known radio station.
■ Recorder
This feature enables you to record
pieces of speech or sound with your
device and listen to them later. The
total available time is 3 minutes with
no memos stored. The maximum
length of a recording depends on how
much memory remains available.
In standby mode, select Menu >
Media > Recorder > Record to start
the recording or Recordings list to
To adjust the radio volume, press the
volume up and down keys.
When an application using a browser
connection is sending or receiving
data, it may interfere with the radio.
When you place or receive a call, the
radio automatically mutes. When the
call ends, the radio switches back on.
45
9243644_6155_en_au.fm Page 46 Wednesday, December 28, 2005 11:28 AM
M e d i a
manage the folder you have defined
for recording storage.
■ Media equaliser
The equaliser enhances the sound
quality when using the music player by
amplifying or attenuating frequency
Record speech or sound
1. In standby mode, select Menu >
bands. You can access five preset
equaliser settings (Normal, Pop, Rock,
Jazz, and Classical) and two
personalisable settings.
Media > Recorder > Record.
2. After you hear the recorder start
tone, begin recording speech or
sound.
Activate an equaliser set
In standby mode, select Menu >
Media > Equaliser, scroll to the desired
setting, and select Activate.
3. When you finish recording, select
Stop, and your recording is saved to
the Recordings folder in the
Gallery.
Create a custom equaliser set
1. In standby mode, select Menu >
Media > Equaliser.
Options
After you have saved the recording to
the Recordings folder, from the
standby mode, go to Gallery >
Recordings. Highlight the recording,
and select Open to listen to the
recording using the earpiece; or select
Options and one of the following.
2. Scroll to Set 1 or Set 2, and select
Options > Edit.
Delete—Erase the recording.
Rename—Change the name of the
recording.
Set as ring tone—Use your recording as
a ringtone (a carrier-dependent
feature).
Details—Show the name, size, and date
of creation of the recording.
Send—
Move—
Open in sequence—
46
9243644_6155_en_au.fm Page 47 Wednesday, December 28, 2005 11:28 AM
M e d i a
The selected set appears in the
display with the bar on the far left
highlighted. The bars adjust
frequencies, from the lowest
(the leftmost bar) to the highest
(the rightmost bar). The higher the
indicator on a particular bar, the
more that frequency is amplified.
3. To adjust the lowest frequency,
scroll up and down on the bar.
4. To adjust other frequencies, scroll
left or right to the other bars.
5. Repeat steps 3 and 4 to adjust the
setting for each frequency;
then select Save.
6. To rename the setting, select
Options > Rename, enter a new
name, and select OK.
7. To activate the setting,
select Activate.
47
9243644_6155_en_au.fm Page 48 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
10. Settings
Use this menu to change profiles,
themes, main display settings, mini
Personalise a profile
You can personalise any of the profiles
in various ways.
display settings, tone settings, time
and date settings, call settings, phone
settings, voice commands,
enhancement settings, security
settings, application settings, network
settings, network services, and restore
factory settings.
1. In standby mode, select Menu >
Settings > Profiles.
2. Select the profile you want to
personalise.
3. Select Personalise and the option
you want to personalise.
■ Profiles
Set a timed profile
Profiles define how your device reacts
when you receive a call or message and
how your keypad sounds when you
press a key. You can leave ringing
options, keypad tones, and other
settings for each of the available
profiles at their default setting, or
personalise them to suit your needs.
You can use timed profiles to prevent
missed calls. For example, suppose you
attend an event requiring your device
set to Silent before the event starts,
but you forget to return it to Normal
until long after the event. A timed
profile can prevent missed calls by
returning your device to the default
profile at a time you specify. You can
set timed profiles up to 24 hours in
advance.
Profiles are also available for
enhancements such as the headset and
car kit. See “Enhancement settings”,
p. 59.
1. In standby mode, select Menu >
To activate a profile, in standby mode,
select Menu > Settings > Profiles >
General, Silent, Meeting, Outdoor, or
Pager > Activate.
Settings > Profiles.
2. Select the profile you want to
activate and Timed for timed
expiration.
3. Enter the time in hh:mm format for
the profile to expire, and select OK.
48
9243644_6155_en_au.fm Page 49 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
2. Browse your selected folder
■ Themes
containing the graphics or image
of your desired wallpaper.
A theme contains many elements for
personalising your phone, such as
wallpaper, screen saver, colour
scheme, and a ringing tone.
3. When you arrive at the image of
your choice, select Options > Set as
wallpaper.
Themes automatically loads
4. To select a set of images to rotate
as wallpaper slides, select Select
slide set > Images.
wallpapers, screen savers, ringing
tones and background colours.
Selecting a theme changes your
previous settings. Individual settings
for a theme can be changed in the
settings menu. For example, the colour
scheme can be modified in the main
display menu in settings, without
changing the wallpaper, screen saver
or ringing tone loaded by a theme.
5. To activate or deactivate
wallpaper, in standby mode, select
Menu > Settings > Main display >
Wallpaper > On or Off.
Screen saver
In standby mode, select Menu >
Settings > Main display >
Screen saver > On or Off.
1. To choose the theme of your
display, in standby mode, select
Menu > Settings > Themes >
Select theme > Themes.
Power saver
2. Scroll to a theme, and select
You can turn the power saver on and
off. In standby mode, select Menu >
Settings > Main display > Power
saver > On or Off.
Open > Options > Apply theme.
■ Main display settings
Wallpaper
You can set your device to display a
background picture (wallpaper).
1. In standby mode, select Menu >
Settings > Main display >
Wallpaper > Select wallpaper >
Images, Video clips, Graphics,
Tones, Recordings, Themes, or a
user-created folder > Open.
49
9243644_6155_en_au.fm Page 50 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
Colour schemes
■ Mini display settings
You can change the colour of some
display components in your device,
such as indicators and signal bars.
In standby mode, select Menu >
Settings > Main display > Colour
schemes and the colour scheme of
your choice.
Wallpaper
You can set your device to display a
background picture (wallpaper).
1. In standby mode, select Menu >
Settings > Mini display >
Wallpaper > Select wallpaper >
Images, Video clips, Graphics,
Tones, Recordings, Themes, or a
user-created folder > Open.
Choose a banner
Banner is a carrier-dependent feature.
If your network operator supports this
feature, you can choose whether the
display shows the operator logo when
the phone is in the idle state.
In standby mode, select Menu >
Settings > Main display > Banner >
Default or Personalise.
2. Browse your selected folder
containing the graphics or image
of your desired wallpaper.
3. When you arrive at the image of
your choice, select Options > Set as
wallpaper.
4. To select a set of images to rotate
as wallpaper slides, select Select
slide set > Images.
Backlight time-out
You can choose how long to set the
backlights on. In standby mode, select
Menu > Settings > Main display >
Backlight time-out >15 seconds or
Personalise (to enter the time-out
ranging from 15 seconds to 5 minutes).
5. To activate or deactivate
wallpaper, in standby mode, select
Menu > Settings > Mini display >
Wallpaper > On or Off.
Screen saver
In standby mode, select Menu >
Settings > Mini display >
Screen saver > On, Off, Screen savers
(Image, or Slide set), or Time-out.
Power saver
You can turn the power saver on and
off. In standby mode, select Menu >
50
9243644_6155_en_au.fm Page 51 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
Settings > Mini display > Power
Ringing tone—Select the ringing tone
saver > On or Off.
for incoming calls.
Ringing volume—Set the volume of
Colour schemes
your ringing tone.
You can change the colour of some
display components in your device,
such as indicators and signal bars.
In standby mode, select Menu >
Settings > Mini display > Colour
schemes and the colour scheme of
your choice.
Light indicator > On or Off—Set the
light indicator.
Vibrating alert > On or Off—Set the
vibrating alert.
Message alert tone—Select the tone for
received messages.
Keypad tones—Set the volume of your
keypad tones (or turn them off).
■ Tone settings
Warning tones > On or Off—Set
warning and confirmation tones.
You can adjust the ringing volume,
keypad tones, and more for the active
profile. See “Personalise a profile”,
p. 48 for more information on profile
settings.
Alert for—Define which caller groups
the selected profile will accept or
decline. See “Caller groups”, p. 34.
Select Menu > Settings > Tones and
one of the following:
Incoming call alert—Select how the
device notifies you of an incoming call.
Video ringing tone > On or Off —
Indicate whether to replace the default
audio ringing tone with the selected
video.
Note: When a video ringing
tone is selected, the video is
only displayed on the internal
or main display screen. It is
recommended not to select
Answer when fold is opened
with a video ringing tone.
See “Open fold to answer”,
p. 53.
51
9243644_6155_en_au.fm Page 52 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
If your battery has been removed or
■ Time and date
has discharged outside the digital
network, you may be prompted to
enter the time manually (when the
battery is replaced or recharged, and
you are still outside of the digital
network).
settings
Clock
In standby mode, select Menu >
Settings > Time and date > Clock >
Show clock or Hide clock, Set the time,
Time zone or Time format.
■ Call settings
Date
Anykey answer
In standby mode, select Menu >
Settings > Time and date > Date >
Show date or Hide date, Set the date,
Date format, or Date separator.
Anykey answer enables you to answer
an incoming call. Briefly press any key
except the right selection or end key.
In standby mode, select Menu >
Settings > Call > Anykey answer >
On or Off.
Date and time auto-update
Auto-update is a network service.
See “Network services”, p. viii. If your
network operator supportsthis feature,
you can allow the digital network to
set the clock, which is useful when you
are out of your home area, for instance
when you have traveled to another
network or time zone.
Automatic redial
Occasionally, your network may
experience heavy traffic, resulting in a
fast busy signal when you dial.
With automatic redial activated, your
device redials the number (number of
times is specified by the network), and
notifies you when the network is
available. In standby mode,
In standby mode, select Menu >
Settings > Time and date > Auto-
update of date & time > On, Confirm
first, or Off.
select Menu > Settings > Call >
Automatic redial > On or Off.
If you use the Auto-update of date &
time option while outside your digital
network, you may be prompted to
enter the time manually. Network time
will replace the time and date when
you reenter your digital network.
Speed dials
You can activate or deactivate speed
dials. In standby mode, select Menu >
Settings > Call > Speed dials > On or
Off. See “Set up speed dials”, p. 34.
52
9243644_6155_en_au.fm Page 53 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
Save information
Open fold to answer
1. In standby mode, select Menu >
By default, your phone answers an
incoming call when you open the fold.
You can change the default setting so
your phone does not answer calls with
the fold open. In standby mode, select
Menu > Settings > Call > Answer
when fold is opened > On or Off.
Settings > Call > Calling card.
2. Enter your lock code, and select OK.
See “Change lock code”, p. 61.
3. Scroll to one of the four card
memory locations, and select
Options > Edit > Dialling sequence
and one of the following sequence
types:
Calling card
If you use a calling card for long
distance calls, you can save the calling
card numbers in your device. Your
device can store up to four calling
cards. Contact your calling card
company for more information.
Access no.+ phone no.+ card no.—
Dial the access number, the phone
number, then the card number (and
the PIN, if required).
Access no.+ card no.+ phone no.—
Dial the access number, the card
number (and the PIN, if required),
then the phone number.
Prefix+ phone no.+ card no.—Dial
the prefix (numbers that must
precede the phone number) and
phone number you want to dial,
then the card number (and the PIN,
if required).
4. Enter the required information
(access number or prefix and card
number), and select OK to confirm
your entries.
5. Select Card name, enter the card
name, and select OK.
Make calls
After you have saved your calling card
information in your device, you can
make a call using your calling card.
53
9243644_6155_en_au.fm Page 54 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
1. In standby mode, select Menu >
1. In standby mode, select Menu >
Settings > Call > Calling card.
Settings > Call > Data/fax calls >
Incoming data/fax call and one of
the following options:
2. Enter your lock code, and select OK.
See “Change lock code”, p. 61.
Normal—The device receives
incoming calls as usual.
3. Select your desired calling card.
4. Press the end key to return to
standby mode; then enter the
phone number, including any prefix
(such as 0 or 1) that your calling
card may require when you make a
calling card call. See your calling
card for instructions
Data calls only—The device receives
only data calls.
Fax calls only—The device receives
only fax calls.
2. When finished with receiving the
fax or data call, repeat steps 1 and
2, and select Normal.
5. Press and hold the call key for a few
seconds until Card call is displayed.
Data transfer
6. When you hear the tone or system
You can view the transmission speed
when sending or receiving data and
fax calls. In standby mode, select
Menu > Settings > Call > Data/fax
calls > Data rate display > Graphic
or Off.
message, select OK.
Data or fax calls
Data and fax calling is a network
service. See “Network services”, p. viii.
If your network operator supports this
feature, you can set up the device to
send or receive data and fax calls with
a terminal, such as a PDA or PC,
connected.
Call summary
Your device can display the time spent
on a call when you hang up. In standby
mode, select Menu > Settings > Call >
Call summary > On or Off.
For better performance during data
calls, place the device on a stationary
surface. Do not move the device or
hold it in your hand during a data call.
Ringing tone for no caller ID
You can select a different ringing tone
for calls received with no caller ID. In
standby mode, select Menu >
Settings > Call > Ringing tone for no
caller ID > On or Off.
For more information on connectivity,
refer to the PC/PDA Connectivity Guide
which can be downloaded from the
Nokia website at www.nokia-asia.com.
54
9243644_6155_en_au.fm Page 55 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
1. In standby mode, select Menu >
Settings > Phone > Automatic
keyguard > On or Off.
International prefix
You can store an international dialling
prefix into your device. In standby
mode, select Menu > Settings > Call >
International prefix. In standby mode,
when you enter + (press * twice) at the
beginning of a phone number, your
device automatically inserts the
international dialling prefix that you
have stored after you press the call key.
See “Insert dialling codes”, p. 28.
2. If you select On, Set delay: is
displayed.
3. Enter the delay time (in mm:ss
format), and select OK.
When keyguard is on, it may be
possible to dial the emergency number
programmed into your device.
DTMF tones
■ Phone settings
DTMF tones are the tones that sound
when you press the keys on your device
keypad. You can use DTMF tones for
many automated dial-up services such
as banking and airlines or for entering
your voice mailbox number and
password.
Phone language
The phone language affects the time
and date formats of the clock, alarm
clock, and calendar.
Memory status
DTMF tones are sent during an active
call. You can send them manually from
your device keypad, or send them
automatically by saving them in your
device.
You can view the size of memory
available on your device. In standby
mode, select Menu > Settings >
Phone > Memory status.
You can view the size of memory
available for application installations.
In standby mode, select Menu >
Extras > Memory.
Set type
In standby mode, select Menu >
Settings > Phone > DTMF tones >
Manual DTMF tones and one of the
following options:
Automatic keyguard
You can set the keypad of your device
to lock automatically after a preset
time delay.
Continuous—Set the tone sound for as
long as you press and hold a key.
Fixed—Send tones of the duration you
specify in the DTMF tone length option.
55
9243644_6155_en_au.fm Page 56 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
Off—Turn off tones. No tones are sent
when you press a key.
Set length
You can specify DTMF tone length for
the Fixed option. In standby mode,
select Menu > Settings > Phone >
DTMF tones > DTMF tone length >
Short (0.1 seconds) or Long (0.5
seconds).
Start-up tone
You can select to have a start-up tone
when you first turn on your device.
In standby mode, select Menu >
Settings > Phone > Start-up tone >
On or Off.
Help text activation
Your device displays brief descriptions
for most menu items. When you arrive
at a feature or menu, pause for about
14 seconds, and wait for the help text
to be displayed. If necessary, use the
scroll key to page through the full help
text.
The default setting for help text is On.
However, you can turn help text on or
off. In standby mode, select Menu >
Settings > Phone > Help text
activation > On or Off.
56
9243644_6155_en_au.fm Page 57 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
If data transfer is not started within 2
minutes after the activation of the IR
port, the connection is cancelled and
must be restarted.
■ Connectivity
Infrared
You can set up the phone to receive
data through its IR port. To use an IR
connection, transmission and
Connection indicator
•
When
is shown continuously,
reception must be to or from an IR
compatible phone or device. You can
send or receive data such as business
cards, graphics, images, sound clips,
music files, videos, and calendar notes
to or from a compatible phone or data
device (such as a computer) using the
IR port of your phone.
the IR connection is activated and
your phone is ready to send or
receive data using its IR port.
•
When
blinks, your phone is
trying to connect to the other
device or a connection has been
lost.
Do not point the IR (infrared) beam at
anyone’s eye or allow it to interfere
with other IR devices. This device is a
Class 1 laser product.
■ Voice commands and
voice tags
Before using voice tags, note the
following:
Send and receive data
1. Ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that
there are no obstructions between
the devices.
•
Voice tags are not language-
dependent, but depend on the
speaker’s voice.
•
•
You must say the name exactly as
you said it when you recorded it.
Voice tags are sensitive to
background noise. Record voice
tags, and use them in a quiet
environment.
The preferable distance between
the two devices in an IR connection
is from 3 inches to 3 feet.
2. To activate IR in your phone, select
Menu > Settings > Connectivity >
Infrared.
•
Very short names are not accepted.
Use long names, and avoid similar
names for different numbers.
3. The user of the other device must
activate IR as well.
57
9243644_6155_en_au.fm Page 58 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
Note: Using voice tags may be Activate a voice command
difficult in a noisy
environment or during an
emergency, so you should not
rely on voice dialling in all
1. In standby mode, press and hold
circumstances.
After you have associated a voice tag
with a function in your device, to issue
a command, speak the voice tag.
the right selection key or voice key.
2. With Speak now displayed,
Hands-free operation
pronounce the voice tag clearly
into the microphone.
You can set as many as 16 voice
commands to enable hands-free
operation of certain features in your
device.
With the voice tag found, the device
displays Found:, and plays the
recognised voice tag through the
earpiece. The function you requested is
activated.
Assign a voice tag to a
command
Before using voice commands, you
must first add a voice tag to the device
function.
Options
After you have associated a voice tag
1. In standby mode, select Menu >
to a command, you can select one of
the following options:
Settings > Voice commands.
2. Select the device function you
want to tag: Profiles, Voice
mailbox, Radio, Infrared, Voice
recorder or Call register.
Playback—Listen to the voice
command tag.
Change—Change the voice command.
Delete—Erase the voice command tag.
3. If necessary, select an option
associated with that function.
4. Select Add, and speak the voice tag
clearly into the microphone. Do not
select Quit unless you want to
cancel the recording.
The device replays and saves the
recorded tag. appears next to
commands with voice tags assigned.
58
9243644_6155_en_au.fm Page 59 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
Hands-free operation
Select the option of your choice to
enter the submenu and modify its
settings.
■ Enhancement
settings
The enhancement settings menu is
shown only if the device has been
connected to a compatible
enhancement. In standby mode, select
Menu > Settings > Enhancements >
Headset, Textphone, or Charger.
Default profile—Choose the profile you
want automatically activated with
your device connected to a car kit.
Automatic answer > On or Off—
Answer calls automatically after one
ring with a car kit connected.
Headset
Important: The headset may
affect your ability to hear
sounds around you. Do not
use the headset in situations
that may endanger your
safety.
Note: .Automatic answer will
only be active whilst General
profile is active.
Lights > On or Automatic—Choose to
keep the device lights always on, or to
shut off automatically after several
seconds.
Select the option of your choice to
enter the submenu and modify its
settings.
Charger
Select the option of your choice to
enter the submenu and modify its
settings.
Default profile—Choose the profile you
want automatically activated with a
headset connected.
Automatic answer > On or Off—
Answer calls automatically after one
ring with a headset connected.
Default profile—Choose the profile you
want automatically activated with
your device connected to the charger.
Note: .Automatic answer will
only be active whilst General
profile is active.
Lights >On or Automatic—Choose to
keep the device lights always on, or to
shut off automatically after several
seconds.
59
9243644_6155_en_au.fm Page 60 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
On power-up—Turns on the device
lock feature the next time you turn
the device on.
■ Security settings
When first accessing the security
settings, enter the preset lock code.
The default setting for lock code is
12345. Depending on your wireless
service provider or network operator,
the preset lock code can be a five digit
number such as 12345 or 00000.
If none of these work, contact your
wireless service provider or network
operator for help.
With Lock now selected, you must
enter your lock code before the device
can function normally. With the lock
code accepted, your device functions
normally.
Call not allowed is displayed if you
attempt to place a call with your
device locked. To answer a call with
phone lock on, select Answer, or press
the call key.
Phone lock
The phone lock feature protects your
device from unauthorised outgoing
calls or unauthorised access to
information stored in the device. With
phone lock activated, Phone locked is
displayed each time you turn your
device on or off.
Allow numbers
With phone lock on, the only outgoing
calls you can make are to the
emergency number programmed into
your device (for example, 111 or 000 or
911) or the number stored in the
Allowed no. when phone locked
location:
With the device locked, calls may still
be possible to the official emergency
number programmed into your device.
1. In standby mode, select Menu >
Settings > Security.
1. In standby mode, select Menu >
Settings > Security.
2. Enter the lock code, and select OK.
See “Change lock code”, p. 61.
2. Enter the lock code, and select OK.
See “Change lock code”, p. 61.
3. Select Allowed no.’s (numbers)
when phone locked. With an empty
folder selected, select Assign, and
enter the phone number; or select
Assign > Search to recall the
number from your contacts list.
Select OK.
3. Select Phone lock and one of the
following options:
Off—Immediately turns off the
device lock feature.
Lock now—Immediately turns on
the device lock feature.
60
9243644_6155_en_au.fm Page 61 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
To call the allowed phone number, in
standby mode, scroll down to highlight
the number you want to call, or enter it
on the keypad; press the call key to
place the call.
1. In standby mode, select Menu >
Settings > Security.
2. Enter the lock code, and select OK.
3. Select Change lock code.
4. Enter the new lock code (must be 4
characters in length).
Change lock code
5. Reenter the new lock code for
The preset lock code, by default, is the
last five digits of your phone number.
Depending on your wireless service
provider or network operator, the
preset lock code can be a five digit
number such as 12345 or 00000.
If none of these work, contact your
wireless service provider or network
operator for help.
verification, and select OK.
When changing your lock code, make
sure you store it in a safe place, away
from your device. Avoid entering
access codes similar to emergency
numbers to prevent accidental
emergency calls.
Call restrictions
To ensure the security of your device,
you may want to change the preset
lock code to your own selected five
digit number. Avoid using codes similar
to emergency numbers such as 111 or
000 or 911 to prevent accidental
dialling of the emergency number.
Select call restrictions to block or allow
numbers for incoming and outgoing
calls. With any numbers entered as
allowed numbers, all those entered as
blocked numbers are ignored. With a
number blocked, the phone blocks any
call from it, and send the caller to the
voice mail.
If you enter an incorrect lock code five
times in a row, your device may ask you
for the security code. By default, the
security code is 12345, a five digit
number.
1. In standby mode, select Menu >
Settings > Security.
2. Enter the lock code, and select OK.
Note: With the wrong lock
code entered five times in
succession, your phone will not
accept your correct lock code
for 5 minutes, even if you
power off the device between
incorrect entries.
See “Change lock code”, p. 61.
3. Select Call restrictions.
4. Select the types of calls you want
to restrict:
Restrict outgoing calls—Set
restrictions on making calls.
61
9243644_6155_en_au.fm Page 62 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
Restrict incoming calls—Set
restrictions on receiving calls.
■ Application settings
1. In standby mode, select Menu >
5. Select whether to block or allow
numbers:
Settings > Application settings.
2. Scroll to one of the following
submenus to activate options for
preset or downloaded games or
applications.
Blocked numbers—Set the numbers
the phone can only block, allowing
all the rest.
Allowed numbers—Set the numbers
the phone can only call or receive,
blocking all the rest.
Application sounds > On or Off
Application lights > App. defined or
Default
6. Select one of these options: Select,
Add restriction (unavailable with
memory full), Edit (unavailable with
no number added), or Delete
Application vibration > On or Off
■ Network
(unavailable with no number added). The menu options you see in your
device depend on your network
operator’s network. The network
Note: With restricted calls,
you may still call the official
determines which options actually
emergency number
appear in the device menu. Check with
programmed into your device.
your network operator for more
information.
Voice privacy
The Network menu enables you to
Voice privacy is a network service.
personalise the way your device
See “Network services”, p. viii. If your
chooses a network in which to operate
wireless service provider or network
while you are within or outside of your
operator supports this feature, the
primary or home system. Your device is
voice privacy feature protects the
set to search for the most cost-
privacy of your current phone
effective network. If your device
conversation from other callers placing
cannot find a preferred network, it
phone calls on your same network.
selects a network automatically based
1. In standby mode, select Menu >
on the option you choose in the
Network menu.
Settings > Security.
2. Enter the lock code, and select OK.
See “Change lock code”, p. 61.
3. Select Voice privacy > On or Off.
62
9243644_6155_en_au.fm Page 63 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
Roaming options
You can set your device to roam or
search for another network when you
are not in your home area.
■ Network services
The following features are network
services. See “Network services”, p. viii.
1. In standby mode, select Menu >
Settings > Network > Roaming
options and one of the following
options:
Store a feature code
1. In standby mode, select Menu >
Settings > Network services >
Network feature setting.
Automatic—The device
2. Enter the feature code from your
network operator (for example,
*633), and select OK.
automatically searches for service
in another digital network. With no
service found, the device uses
analog service. The roaming rate
applies when not in the home
service area.
3. Select the type of service that
matches the feature code you
entered (for example, Call divert).
The activated feature code is now
stored in your device, and you are
returned to the Feature code: field.
Continue entering other feature
codes (for example, *633), or press
the end key to return to standby
mode. When you enter a network
feature code successfully, the
feature becomes visible in the
Network services menu.
2. Select OK, if necessary, to confirm
the activation.
Mode
You can choose whether your device
uses digital or analog service.
In standby mode, select Menu >
Settings > Network > Mode and one of
the following service options:
Digital only—The device only works in
digital mode.
63
9243644_6155_en_au.fm Page 64 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
1. In standby mode, select Menu >
Call divert
Settings > Restore settings.
Call divert tells your network to
redirect incoming calls to another
number. Call divert is a network service
and may not work the same in all
networks, so contact your network
operator for availability.
2. Enter the lock code, and select OK.
See “Change lock code”, p. 61.
Note: Depending on your
wireless service provider or
network operator, your device
may sometimes ask you for the
security code (defaulted to
12345) instead of the lock
code.
Activate
The following options may not all
appear in the display. Contact your
network operator for more
information.
1. In standby mode, select Menu >
Settings > Network services > Call
divert > Activate.
2. Enter the number to which your
calls, data, or other information
will be diverted, and select OK.
Cancel
In standby mode, select Menu >
Settings > Network services > Call
divert > Cancel all diverts. Cancel all
diverts may affect your ability to
receive voice mail messages.
Contact your network operator for
specific details.
■ Restore factory
settings
You can reset some of the menu
settings to their original values. Data
that you have entered or downloaded
is not deleted (for example, entries in
your contacts list are not affected).
64
9243644_6155_en_au.fm Page 65 Wednesday, December 28, 2005 11:28 AM
O r g a n i s e r
11. Organiser
Your device contains features to help
organise your everyday life, including
an alarm clock, calendar, notes, to-do
list, calculator, countdown timer, and
stopwatch.
3. Select am or pm (with 12-hour
format selected), and select OK.
Alarm on appears briefly in the
display, and
appears in
standby mode.
Repeat alarm
■ Alarm clock
You can set the alarm to repeat.
In standby mode, select Menu >
Organiser > Alarm clock > Repeat
alarm > On/Off or Repetition days.
Select to choose.
If the alarm time arrives with the
device switched off, the device
switches itself on and starts sounding
the alarm tone. If you select Stop, the
device asks whether you want to
activate the device for calls. Select No
to switch off the device or Yes to make
and receive calls. Do not select Yes
when wireless phone use may cause
interference or danger.
Set the alarm tone
You can set which tone to play when
the alarm sounds. In standby mode,
select Menu > Organiser >
Alarm clock > Alarm tone > Standard,
Radio, or Open Gallery to choose the
tone you want to use.
Set or change alarm setting
The alarm clock depends on the device
clock which sounds an alert anytime
you specify. It even works with the
device turned off.
If you set your alarm to Radio, use an
accessory that supports FM stereo.
1. In standby mode, select Menu >
Organiser > Alarm clock > Alarm
time > On.
Snooze time-out
To set the alarm snooze time, select
Menu > Organiser > Alarm clock >
Snooze time-out > 5 minutes, 10
minutes, 15 minutes, 30 minutes, 60
minutes, or Other (to enter up to 60
minutes snooze time).
2. Enter the time for the alarm in
hh:mm format.
65
9243644_6155_en_au.fm Page 66 Wednesday, December 28, 2005 11:28 AM
O r g a n i s e r
Alarm conditions
Open
When the alarm sounds, your device
beeps, vibrates (if vibrating alert is on
for currently active profile), and the
display lights up.
In standby mode, select Menu >
Organiser > Calendar, or press the
right scroll key. Scroll to move the
cursor in some calendar views.
With the device on, select Stop to shut
the alarm off or Snooze. With Snooze
selected, the alarm stops for 10
minutes, or the selected duration, and
Snooze on appears in the display.
Go to a date
1. In standby mode, select Menu >
Organiser > Calendar > Options >
Go to date.
If you do not press a key, the alarms
stops (snoozes) for 10 minutes, then
sounds again. You can also select
Menu > Organiser > Alarm clock >
Snooze time-out to reset the snooze
time.
2. Enter the date (dd:mm:yyyy),
and select OK.
Note a specific date
You can apply five types of notes to
your calendar. Your device asks for
further information depending on
which note you choose. You also have
the option to set an alarm for any note
you select.
Turn an alarm off
In standby mode, select Menu >
Organiser > Alarm clock >
Alarm time > Off.
1. Enter the date for which you want
to set a reminder. See “Go to a
date”, p. 66.
■ Calendar
The calendar keeps track of reminders,
calls you need to make, meetings, and
birthdays. It can even sound an alarm
for any of these events.
2. From the monthly view (with the
go-to date highlighted), select
Options > Make a note and one of
the following note types:
Monthly view provides an overview of
the selected month and weeks,
enabling you to jump to a specific date.
Any days or dates that appear in bold
font contain calendar notes such as a
meeting or reminder.
Meeting—Enter a subject, location,
and a start and end date and time.
Call—Enter a phone number, a
name, and the date and time.
Birthday—Enter the person’s name,
date and year of birth.
66
9243644_6155_en_au.fm Page 67 Wednesday, December 28, 2005 11:28 AM
O r g a n i s e r
Memo—Enter a subject and a start
Move—Move the note to another
and end date.
date on your calendar.
Reminder—Enter the subject and
date of your reminder.
Repeat—Set the note (except for
birthday note) to recur on a regular
basis (daily, weekly, biweekly,
monthly, and yearly).
You are given the option to set an
alarm.
Go to date—Jump to another date
on your calendar.
3. Enter your note, and select Save.
Go to today—Jump to the current
date on your calendar.
View notes (day view)
After you have created calendar notes,
Send note—Send the note to
another device as a text message or
in calendar-to-calendar format by
way of multimedia messages or
SMS.
you can view them.
1. In standby mode, select Menu >
Organiser > Calendar.
2. Scroll to the date containing the
note that appears in bold type,
and select View.
Copy—Copy the note for you to
paste to another date.
Settings—Set the date and time,
date and time format, the day each
week starts and whether you want
your notes to autodelete after a
specified time.
Options while viewing a list
of notes
1. Select Options while viewing a
day’s note to display the following:
The options listed below are
available while viewing the header
of a note.
Go to to-do list—Jump to the to-do
list on your calendar.
2. Select an option to activate it or
enter its submenu.
Make a note—Create a new note
for the selected date.
Delete—Delete the note.
Edit—Edit the note.
67
9243644_6155_en_au.fm Page 68 Wednesday, December 28, 2005 11:28 AM
O r g a n i s e r
Send a note
Receive calendar notes
1. In standby mode, select Menu >
When you receive a calendar note in
calendar-to-calendar format, your
device displays Calendar note received.
Organiser > Calendar.
2. Scroll to the date that appears in
bold type, containing the note you
want to send, and select View.
•
To view calendar notes, select
Show, and if necessary, scroll to
view the entire message.
3. Scroll to the note you want to send,
and select Options > Send note >
Send as message (Text message or
Multimedia msg.), Via calendar, or
Via infrared.
•
•
To save calendar notes after
viewing, select Options > Save.
To discard calendar notes after
viewing, select Exit or Options >
Discard.
4. If you select Via calendar, enter the
number for the recipient, or select
Search to retrieve a number from
the contacts list; select OK.
When you receive a calendar note
or text message, a message
notification appears in standby
mode. You can save the note in
your calendar and set an alarm for
any date and time.
5. If you select Send as message (Text
message or Multimedia msg.), the
note appears as a text message in
the display.
•
Select Send to > Send to
number, Send to many, or Send
to distrib. list.
■ Notes
You can write and save information in
Notes and send notes using
•
Enter the number for the
recipient, or select Search to
retrieve a number from the
contacts list; select Send.
multimedia or text message.
In standby mode, select Menu >
Organiser > Notes. With no notes
created, select Add note, create your
note, and select Save when done. With
notes already created, highlight the
note you want to use, and select View
to read or Options > Make a note,
Delete, Edit, Send note (Send as
message or Via multimedia), or Delete
all notes.
68
9243644_6155_en_au.fm Page 69 Wednesday, December 28, 2005 11:28 AM
O r g a n i s e r
Send—Send the note to another
device, as a text or multimedia
message, or as a calendar note to
another compatible device.
■ To-do list
Use the to-do list feature to keep track
of your tasks. You can save a note for a
task, select a priority level for the note
and mark it as done when you have
completed it. You can sort the notes by
priority or by date.
Go to calendar—Leave the to-do
list, and go to the calendar.
Save to calendar—Save the to-do
note to a date on your calendar.
Add a to-do note
1. In standby mode, select Menu >
Delete done notes—Delete all the
completed to-do notes.
Organiser > To-do list.
Delete all notes—Delete all the
to-do notes in the list.
2. If there are no notes, select Add
note.
3. View the to-do note, and select
Edit to edit the note or Options to
select from the following:
3. Enter the subject of the to-do note,
and select Save.
Deadline—Set a deadline for the
note, listing any uncompleted
notes if existing.
4. Select High, Medium, or Low
priority.
5. Enter the due date and time to set
the alarm.
Mark note as done or Mark as not
done—Mark a note or task as
completed or not; if completed, no
more reminders will follow.
View a to-do note
1. In standby mode, select Menu >
Delete—Delete the note.
Organiser > To-do list.
Edit priority—Change the priority to
high, medium, or low.
2. Highlight a to-do note, and select
Options and one of the following:
Send—Send the note to another
device, as a text or multimedia
message, or as a calendar note to
another compatible device.
Add—Add another note.
Delete—Delete the note.
Mark note as done or Mark as not
done—Mark a note or task as
completed or not; if completed, no
more reminders will follow.
Go to calendar—Leave the to-do
list, and go to the calendar.
Save to calendar—Save the to-do
note to a date on your calendar.
Sort by deadline—Sort the notes
according to their deadline.
69
9243644_6155_en_au.fm Page 70 Wednesday, December 28, 2005 11:28 AM
O r g a n i s e r
Currency converter
■ Calculator
You can convert foreign currency to
domestic, or vice versa, directly in
standby mode or from the Calculator
menu.
The calculator in your device adds,
subtracts, multiplies, divides,
calculates the square and the square
root, changes the sign of the number
entered, and converts currency values.
Note: When you change base
currency, you must enter the
new rates because all
previously set exchange rates
are set to zero.
Note:Thiscalculator, designed
for simple calculations, has
limited accuracy.
1. In standby mode, select Menu >
1. In standby mode, select Menu >
Organiser > Calculator >
Organiser > Calculator.
2. Enter the first number in the
calculation. Press # for a decimal
point if necessary.
Options > Exchange rate > Foreign
units in domestic units or Domestic
units in foreign units.
To change the sign, select
Options > Change sign, or scroll up
or down.
Foreign units in domestic units—
The number of domestic units cost
to make one unit of foreign
currency.
To perform a square or square root
calculation, select Options >
Square or Square root.
Domestic units in foreign units—
The number of foreign units cost to
make one unit of your domestic
currency.
To cycle through the add (+),
subtract (-), multiply (*), and divide
(/) characters, press *.
2. Enter the exchange rate (press # to
3. Enter the second number in your
calculation.
insert a decimal), and select OK.
3. In standby mode, enter the
4. Select Equals to complete
calculation or Options if more
functions are required.
currency amount to be converted.
4. Select Options > In domestic or In
foreign.
In domestic—converts foreign
currency to domestic currency.
In foreign—converts domestic
currency to foreign currency.
70
9243644_6155_en_au.fm Page 71 Wednesday, December 28, 2005 11:28 AM
O r g a n i s e r
5. If you do not enter an exchange
rate, the device will prompt you to
do so. Select OK. You can edit the
exchange rate at anytime.
displays the timer note, vibrates (if
set), and flashes its lights.
Press any key during the alarm to stop
the alarm. After 30 seconds the timer
alert stops automatically.
■ Countdown timer
The countdown timer in your device
enables you to enter a specific time (up
to 99 hours and 59 minutes). When the
time runs out, your device sounds an
alarm.
Change the time
After you have set the timer, you can
change the time.
1. In standby mode, select Menu >
Organiser > Timer > Change time.
Note: The countdown timer
only works when the device is
on. When you turn off your
device, the timer is no longer
active.
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a
new note; select Start.
Interrupt the timer
After you have set the timer, you can
stop the timer. In standby mode, select
Menu > Organiser > Timer > Stop
timer.
Set the timer
1. In standby mode, select Menu >
Organiser > Timer > Normal timer,
Interval timer, or Settings.
Normal timer measures the
countdown time for tasks that
have one period (timer name).
Interval timer saves sets of
countdown times with more than
one period.
■ Stopwatch
You can use the stopwatch in your
device to track time. The stopwatch
displays time in hours, minutes,
seconds, and fractions of a second in
hh:mm:ss:s format.
2. Enter the time (in hh:mm:ss
format), and select OK.
Using the stopwatch or allowing it to
run in the background when using
other features increases the demand
on battery power and reduces the
battery life.
3. Enter a note for the timer, and
select Start.
appears in standby mode with the
countdown timer set. When the time
runs out, your device sounds an alarm,
71
9243644_6155_en_au.fm Page 72 Wednesday, December 28, 2005 11:28 AM
O r g a n i s e r
Lap and split times
Measure time
To save a time while the clock is
running, select Stop > Save, enter a
name for the measurement, and select
OK. If you do not enter a name, the
total time is used as the default title
for the lap or split time.
1. In standby mode, select Menu >
Organiser > Stopwatch > Split
timing or Lap timing > Start. The
running time is displayed.
Split timing—You can use the split
time function for such things as a
long distance race when you need
to pace yourself. Select Split to
note the lapsed time. The timer
continues to run and the split time
appears below the running time.
To view a saved time, in standby mode,
select Menu > Organiser >
Stopwatch > Show last time or View
times.
To delete a saved time from
Each time you select Split, the new Stopwatch, select View times and the
measured time appears at the
beginning of the list.
time to delete, and select Delete > Yes;
or select Delete times > One by one or
Delete all.
Lap timing—You can use the lap
time function when you want to
track how long it takes to complete Operation note
each cycle or lap. Select Lap to
note the lap time. The clock stops,
then starts immediately from zero.
The lap time appears below the
running time. Each time you select
Lap, the new measured time
If you press the end key and return to
standby mode, the clock continues to
run in the background, and
appears in the upper left corner.
To return to the stopwatch screens, in
standby mode, select Menu >
Organiser > Stopwatch > Continue.
To stop the clock, select Stop.
appears at the beginning of the list.
2. Select Stop to end the timing and
display the total time or Stop >
Options > Start or Reset to
continue or reset timing.
72
9243644_6155_en_au.fm Page 73 Wednesday, December 28, 2005 11:28 AM
O r g a n i s e r
Options
You can choose the following options
when you use the stopwatch:
Continue—Appears when the
stopwatch is working in the
background.
Show last time— Appears when you
have saved a split or lap time and
displays the last time saved.
Split timing—Asks if you want to
discontinue previous timing.
Lap timing—Asks if you want to
discontinue previous timing.
View times—Enables you to browse the
saved times.
Delete times—Enables you to delete
any saved times. You can delete the
saved times one by one or all at once.
73
9243644_6155_en_au.fm Page 74 Wednesday, December 28, 2005 11:28 AM
M o b i l e w e b
12. Mobile web
Minibrowser is a network service.
See “Network services”, p. viii.
■ Mobile Internet
access
Your device has a built-in browser you
Because mobile Internet content is
can use to connect to selected services
on the mobile internet. If your network
device, your network operator is now
operator supports this feature, then
designed to be viewed from your
your mobile Internet service provider
you can view weather reports, check
as well.
news or flight times, view financial
It is likely that your network operator
information, and much more. The web
has created a home page and set up
browser on your device can display
your browser to go to this page when
WAP-based content.
you log on to the mobile Internet. At
your service provider’s home page, you
loaded for sites not affiliated with
may find links to a number of other
Your device may have some bookmarks
Nokia. Nokia does not warrant or
sites.
endorse these sites. If you choose to
It should not be necessary to manually
access them, you should take the same
configure the browser on your device.
precautions, for security or content, as
Normally this is done by your network
you would with any internet site.
operator after you subscribe to the
feature. Contact your network
that the data transmission between
operator if you have problems using
The security icon does not indicate
the gateway and the content server (or
the browser.
place where the requested resource is
stored) is secure. The network operator
secures the data transmission between
the gateway and the content server.
74
9243644_6155_en_au.fm Page 75 Wednesday, December 28, 2005 11:28 AM
M o b i l e w e b
Receive a call while online
If your data connection is not active,
you may still be able to receive a voice
call while using the WAP browser.
■ Sign on
In standby mode, select Menu >Mobile
web > Minibrowser > Connect or the
operator provided menu item.
•
To answer the incoming call, press
the call key.
After a brief pause, your device
attempts to connect to your network
operator’s home page. If you receive an
error message, your device may not be
set up for browsing. Contact your
network operator to make sure that
your device is configured properly.
•
To reject the incoming call, press
the end key (a carrier-dependent
feature).
While in the voice call, you are not able
to load new pages in the browser.
Note: If your data connection
is active, the incoming calls are
automatically diverted tovoice
mail, depending on your
carrier.
■ Navigate the mobile
Internet
Since your device screen is much
smaller than a computer screen,
mobile Internet content is displayed
differently than you may be
accustomed to seeing. This section
contains guidelines for using the keys
to navigate a WAP site.
Make an emergency call
while online
You can end your data connection and
make an emergency call.
1. To close your mobile Internet
connection, press the end key.
Phone keys
•
Press the power key to display the
2. Press the end key as many times as
needed to clear the display and
ready the device for calls.
minibrowser home screen.
•
Scroll up or down to browse the
WAP site.
3. Enter the emergency number for
your present location (for example,
111 or 000 or 911). Emergency
numbers vary by location.
•
•
Select an item.
To enter letters and numbers, press
a key from 0–9.
•
To enter special characters, press *.
4. Press the call key.
75
9243644_6155_en_au.fm Page 76 Wednesday, December 28, 2005 11:28 AM
M o b i l e w e b
Clear the cache and
disconnect
A cache is a memory location that is
used to store data temporarily. If you
have tried to access or have accessed
confidential information requiring
passwords, empty the cache after each
use. The information or services you
have accessed are stored in the cache.
To empty the cache while in the
browser menu, select Navigate >
Advanced > Clear > Cache from the
home page. To clear the cache and
power off your device, press and hold
the power key.
To close your mobile internet
connection while browsing, press the
end key.
76
9243644_6155_en_au.fm Page 77 Wednesday, December 28, 2005 11:28 AM
E x t r a s
13. Extras
Challenge yourself or a friend to one of
the fun games in your device. Some
menus listed are network services.
Contact your network operator for
more information. To download games
or applications, select either the
Games or Collection menu.
Note: Only install applications
from sources that offer
adequate protection against
harmful software.
■ Memory
You can view the size of memory
available for games or application
installations. In standby mode, select
Menu > Extras > Memory.
■ Games
In standby mode, select Menu >
Extras > Games to display the games
on your device.
Note: Only install applications
from sources that offer
adequate protection against
harmful software.
■ Collection
Collections is a network service.
See “Network services”, p. viii. If your
network operatorsupportsthisfeature,
you will find useful applications
pre-installed on your device. Also, you
can manage and download new Java
applications that may be offered by
your network operator.
An application may require a few
seconds to load. When you open an
application, wait for the launch screen
to disappear. At that point, the
application is ready.
In standby mode, select Menu >
Extras > Collection and an application.
77
9243644_6155_en_au.fm Page 78 Wednesday, December 28, 2005 11:28 AM
P C c o n n e c t i v i t y
14. PC connectivity
contents of the folder on your PC
where you have MP3 files, photo
files, or video files stored.
■ USB data transfer
You can transfer data such as music,
photos, and videos from your device to
a compatible PC or from a compatible
PC to your device using a DKU-2 USB
data cable or the CA-53 data cable.
The cable is connected to your device
correctly when the arrowhead points
toward the display screen. Disconnect
the USB data cable from the device to
make a call.
5. Select the files on your PC that you
want to transfer to the device.
6. Drag and drop the files from the
second window into the first
window, and place them in a folder.
7. The files are transferred to the
device and can be played or
accessed by the media player.
If you select files that require more
memory than the memory capacity
of the device, an error note is
displayed. Deselect some of the
files until the selected files fit the
memory.
Transfer with Windows
Explorer
It is possible to use Windows Explorer
to transfer music, photo, and video
files to your device and from your
device to your PC.
8. Disconnect the USB cable.
1. Connect your PC and your device
with a DKU-2 USB cable. Data
enhancement connected is
■ Nokia PC Suite
Nokia PC Suite software is available for
the Nokia 6155 phones. Nokia PC Suite
is a collection of powerful tools that
you can use to manage your device
features and data. Each component is a
separate program that includes online
helps. Nokia PC Suite software,
displayed on your device.
2. Open Windows Explorer.
Your device appears as a local drive
(named by Nokia 6155) with a
drive letter assigned to it.
3. Click on the folders to display a
window that shows the contents of
the folder on the device.
installation instructions, and other
documentation, which are provided
4. Open a second instance of
Windows Explorer, and display the
78
9243644_6155_en_au.fm Page 79 Wednesday, December 28, 2005 11:28 AM
P C c o n n e c t i v i t y
free of charge and can be downloaded Copyright protection may prevent
from the software downloads of the
Nokia web site: www.nokia-asia.com.
some images, ring tones, and other
content from being copied, modified,
transferred, or forwarded.
Some of the features in your device
require network support. Contact your
network operator for availability and
configuration instructions.
•
•
•
Nokia Image Converter makes
images usable for multimedia
messages or wallpapers and
transfers them to your device.
Nokia Sound Converter edits
polyphonic ringing tones to be
compatible with your device and
transfers them to your device.
Nokia Content Copier copies
information or backs up
information from your device to
the PC or to another compatible
Nokia device.
•
•
Nokia Phone Editor sends text
messages and edits the contact
directory and message settings of
your device.
Nokia PC Sync synchronises the
contacts directory and calendar
between your device and a
compatible PC.
•
•
Nokia Connection Manager selects
the connection type between the
PC and the device.
Nokia Phone Browser copies
images and tones from your device
to your PC and vice versa.
79
9243644_6155_en_au.fm Page 80 Wednesday, December 28, 2005 11:28 AM
E n h a n c e m e n t s
15. Enhancements
Check the model number of any
charger before use with this device.
This device is intended for use when
supplied with power from AC-3 or
AC-4.
Power:
•
•
•
•
•
Standard Li-Ion Battery (BL-6C)
Standard Travel Charger (AC-3)
Travel Charger (AC-4)
Mobile Charger (DC-4)
Warning: Use only batteries,
chargers and enhancements
approved by Nokia for use
with this particular model.
The use of any other types
may invalidate any approval
or warranty, and may be
Charger Adapter (CA-44)
dangerous. For availability of
approved enhancements,
please check with your dealer.
A few practical rules about
accessories and enhancements:
•
Keep all accessories and
enhancements out of the reach of
small children.
•
When you disconnect the power
cord of any accessory or
enhancement, grasp and pull the
plug, not the cord.
•
•
Checkregularlythatenhancements
installed in a vehicle are mounted
and are operating properly.
Installation of any complex car
enhancements must be made by
qualified personnel only.
80
9243644_6155_en_au.fm Page 81 Wednesday, December 28, 2005 11:28 AM
B a t t e r y i n f o r m a t i o n
16. Battery information
If the battery is completely discharged,
■ Charging and
it may take a few minutes before the
charging indicator appears on the
display or before any calls can be
made.
discharging
Your device is powered by a
rechargeable battery. The full
performance of a new battery is
achieved only after two or three
complete charge and discharge cycles.
The battery can be charged and
discharged hundreds of times, but it
Use the battery only for its intended
purpose. Never use any charger or
battery that is damaged.
Do not short-circuit the battery.
will eventually wear out. When the talk Accidental short-circuiting can occur
and standby times are noticeably
shorter than normal, replace the
battery. Use only Nokia approved
batteries, and recharge your battery
only with Nokia approved chargers
designated for this device.
when a metallic object such as a coin,
clip, or pen causes direct connection of
the positive (+) and negative (-)
terminals of the battery. (These look
like metal strips on the battery.) This
might happen, for example, when you
carry a spare battery in your pocket or
purse. Short-circuiting the terminals
may damage the battery or the
If a replacement battery is being used
for the first time or if the battery has
not been used for a prolonged period, it
may be necessary to connect the
connecting object.
charger then disconnect and reconnect Leaving the battery in hot or cold
it to begin charging the battery.
places, such as in a closed car in
summer or winter conditions, will
reduce the capacity and lifetime of the
battery. Always try to keep the battery
between 15°C and 25°C (59°F and
77°F). A device with a hot or cold
battery may not work temporarily,
even when the battery is fully charged.
Battery performance is particularly
limited in temperatures well below
freezing.
Unplug the charger from the electrical
plug and the device when not in use.
Do not leave a fully charged battery
connected to a charger, since
overcharging may shorten its lifetime.
If left unused, a fully charged battery
will lose its charge over time.
81
9243644_6155_en_au.fm Page 82 Wednesday, December 28, 2005 11:28 AM
B a t t e r y i n f o r m a t i o n
Do not dispose of batteries in a fire as
they may explode. Batteries may also
explode if damaged. Dispose of
batteries according to local
regulations. Please recycle when
possible. Do not dispose as household
waste.
Authenticate hologram
1. When looking at the hologram on
the label, you should see the Nokia
connecting hands symbol from one
angle and the Nokia Original
Enhancements logo when looking
from another angle.
■ Nokia battery
authentication
guidelines
Always use original Nokia batteries for
your safety. To check that you are
getting an original Nokia battery,
purchase it from an authorised Nokia
dealer, look for the Nokia Original
Enhancements logo on the packaging
and inspect the hologram label using
the following steps:
2. When you angle the hologram left,
right, down, and up, you should see
1, 2, 3, and 4 dots on each side
respectively.
Successful completion of the four
steps is not a total assurance of the
authenticity of the battery. If you have
any reason to believe that your battery
is not an authentic original Nokia
battery, you should refrain from using
it, and take it to the nearest authorised
Nokia service point or dealer for
assistance. Your authorised Nokia
service point or dealer will inspect the
battery for authenticity. If authenticity
cannot be verified, return the battery
to the place of purchase.
3. Scratch the side of the label to
reveal a 20-digit code, for example,
12345678919876543210. Turnthe
battery so that the numbers are
facing upwards. The 20-digit code
reads starting from the number at
the top row followed by the
bottom row.
82
9243644_6155_en_au.fm Page 83 Wednesday, December 28, 2005 11:28 AM
B a t t e r y i n f o r m a t i o n
You should receive a message
indicating whether the code can be
authenticated.
If you need assistance confirming
the battery code, contact your local
Nokia Care Centres listed at
www.nokia-asia.com/
carecentrelocator.
4. Confirm that the 20-digit code is
valid by following the instructions
at www.nokiaoriginals.com/check.
What if your battery is not authentic?
If you cannot confirm that your Nokia
battery with the hologram on the label
is an authentic Nokia battery,
please do not use the battery. Take it to
the nearest authorised Nokia service
point or dealer for assistance. The use
of a battery that is not approved by the
manufacturer may be dangerous and
may result in poor performance and
damage to your device and its
To create a text message enter the
20-digit code, for example,
12345678919876543210, and send to enhancements. It may also invalidate
any approval or warranty applying to
the device.
+44 7786 200276.
To create a text message,
To find out more about original
Nokia batteries, visit
www.nokiaoriginals.com/battery.
•
For countries in Asia Pacific,
excluding India: Enter the 20-digit
code, for example,
12345678919876543210, and
send to +61 427151515.
•
For India only: Enter Battery
followed by the 20-digit battery
code, for example, Battery
12345678919876543210,
and send to 5555.
National and international operator
charges will apply.
83
9243644_6155_en_au.fm Page 84 Wednesday, December 28, 2005 11:28 AM
C a r e a n d m a i n t e n a n c e
17. Care and maintenance
Your device is a product of superior
design and craftsmanship and should
be treated with care. The suggestions
below will help you protect your
warranty coverage.
•
Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and fine
mechanics.
•
•
•
Do not use harsh chemicals,
cleaning solvents, or strong
detergents to clean the device.
•
Keep the device dry. Precipitation,
humidity, and all types of liquids or
moisture can contain minerals that
will corrode electronic circuits. If
your device does get wet, remove
the battery, and allow the device to
dry completely before replacing it.
Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.
Use a soft, clean, dry cloth to clean
any lenses, such as camera,
proximity sensor, and light sensor
lenses.
•
Do not attempt to remove the
battery from the device. Nokia
recommends that you take the
device to the nearest authorised
service facility for replacement of
the battery.
•
Use only the supplied or an
approved replacement antenna.
Unauthorised antennas,
modifications, or attachments
could damage the device and may
violate regulations governing radio
devices.
•
•
Do not use or store the device in
dusty, dirty areas. Its moving parts
and electronic components can be
damaged.
•
•
Use chargers indoors.
Do not store the device in hot
areas. High temperatures can
shorten the life of electronic
devices, damage batteries, and
warp or melt certain plastics.
Always create a backup of data you
want to keep, such as contacts and
calendar notes, before sending
your device to a service facility.
All of the above suggestions apply
equally to your device, battery,
charger, or any enhancement. If any
device is not working properly, take it
to the nearest authorised service
facility for service.
•
Do not store the device in cold
areas. When the device returns to
its normal temperature, moisture
can form inside the device and
damage electronic circuit boards.
•
Do not attempt to open the device
other than as instructed in this
guide.
84
9243644_6155_en_au.fm Page 85 Wednesday, December 28, 2005 11:28 AM
A d d i t i o n a l s a f e t y i n f o r m a t i o n
18. Additional safety information
Your device and its enhancements may
■ Medical devices
contain small parts. Keep them out of
Operation of any radio transmitting
the reach of small children.
equipment, including wireless phones,
may interfere with the functionality of
■ Operating
inadequately protected medical
devices. Consult a physician or the
manufacturer of the medical device to
environment
Remember to follow any special
determine if they are adequately
regulations in force in any area and
shielded from external RF energy or if
always switch off your device when its
you have any questions. Switch off
use is prohibited or when it may cause
your device in health care facilities
interference or danger. Use the device
when any regulations posted in these
only in its normal operating positions.
areas instruct you to do so. Hospitals or
This device meets RF exposure
health care facilities may be using
guidelines when used either in the
equipment that could be sensitive to
normal use position against the ear or
external RF energy.
when positioned at least 2.2 cm (7/
8 inches) away from the body. When a
carry case, belt clip or holder is used
PACEMAKERS
Pacemaker manufacturers recommend
for body-worn operation, it should not
that a minimum separation of 6 inches
contain metal and should position the
(15.3 cm) be maintained between a
device the above-stated distance from
wireless device or phone and a
your body.
pacemaker to avoid potential
In order to transmit data files or
interference with the pacemaker.
messages, this device requires a good
These recommendations are consistent
quality connection to the network. In
with the independent research by and
some cases, transmission of data files
recommendations of Wireless
or messages may be delayed until such
Technology Research. To minimise the
a connection is available. Ensure the
potential for interference, persons with
above separation distance instructions
pacemakers should
are followed until the transmission is
•
always keep the device more than
6 inches (15.3 cm) from their
pacemaker when the device is
switched on
completed.
85
9243644_6155_en_au.fm Page 86 Wednesday, December 28, 2005 11:28 AM
A d d i t i o n a l s a f e t y i n f o r m a t i o n
•
•
not carry the device in a breast
pocket
For vehicles equipped with an air bag,
remember that an air bags inflate with
great force. Do not place objects,
including installed or portable wireless
equipment in the area over the air bag
or in the air bag deployment area. If in-
vehicle wireless equipment is
hold the device to the ear opposite
the pacemaker to minimise the
potential for interference.
If you have any reason to suspect that
interference is taking place, switch off
your device immediately.
improperly installed and the air bag
inflates, serious injury could result.
FCC regulations prohibit using your
wireless device while in the air. The use
of wireless telephones in an aircraft
may be dangerous to the operation of
the aircraft, disrupt the wireless
HEARING AIDS
Some digital wireless devices may
interfere with some hearing aids.
If interference occurs, consult your
service provider.
telephone network, and may be illegal.
■ Vehicles
■ Potentially explosive
RF signals may affect improperly
installed or inadequately shielded
electronic systems in motor vehicles
such as electronic fuel injection
systems, electronic antiskid (antilock)
braking systems, electronic speed
control systems, air bag systems. For
more information, check with the
manufacturer or its representative of
environments
Switch off your device when in any
area with a potentially explosive
atmosphere and obey all signs and
instructions. Potentially explosive
atmospheres include areas where you
would normally be advised to turn off
your vehicle engine. Sparks in such
your vehicle or any equipment that has areas could cause an explosion or fire
been added.
resulting in bodily injury or even death.
Switch off the device at refuelling
points such as near gas pumps at
Only qualified personnel should service
the device, or install the device in a
vehicle. Faulty installation or service
may be dangerous and may invalidate
any warranty that may apply to the
device. Check regularly that all
wireless device equipment in your
vehicle is mounted and operating
properly. Do not store or carry
service stations. Observe restrictions
on the use of radio equipment in fuel
depots, storage, and distribution areas,
chemical plants or where blasting
operations are in progress. Areas with
a potentially explosive atmosphere are
often but not always clearly marked.
They include below deck on boats,
chemical transfer or storage facilities,
vehicles using liquefied petroleum gas
flammable liquids, gases, or explosive
materials in the same compartment as
the device, its parts, or enhancements.
86
9243644_6155_en_au.fm Page 87 Wednesday, December 28, 2005 11:28 AM
A d d i t i o n a l s a f e t y i n f o r m a t i o n
(such as propane or butane), and areas 3. Enter the official emergency
where the air contains chemicals or
particles such as grain, dust or metal
powders.
number for your present location,
and press the call key. Emergency
numbers vary by location
Failure to observe these instructions
may lead to suspension or denial of
telephone services to the offender,
legal action, or both.
If certain features are in use, you may
first need to turn those features off
before you can make an emergency
call. If the device is in an offline or
flight mode you must change the
profile to activate the device function
before you can make an emergency
call. Consult this guide or your service
provider. When making an emergency
call, give all the necessary information
as accurately as possible. Your wireless
device may be the only means of
communication at the scene of an
accident. Do not end the call until
given permission to do so.
■ Emergency calls
Important: Wireless phones,
including this device, operate
using radio signals, wireless
networks, landline networks,
and user-programmed
functions. Because of this,
connections in all conditions
cannot be guaranteed. You
should never rely solely on
any wireless device for
■ Certification
essential communications
like medical emergencies.
information (SAR)
To make an emergency call, make sure THIS DEVICE MEETS INTERNATIONAL
your device is properly charged before
attempting any emergency calls. If
your battery becomes empty, you
cannot receive or make calls, including
emergency calls and must wait a few
minutes after the charging begins to
place your call.
GUIDELINES FOR EXPOSURE TO RADIO
WAVES
Your mobile device is a radio
transmitter and receiver. It is designed
and manufactured not to exceed the
limits for exposure to radio frequency
(RF) recommended by international
1. If the device is not on, switch it on. guidelines (ICNIRP). These limits are
Check for adequate signal strength. part of comprehensive guidelines and
Some networks may require that a
valid UIM (CDMA SIM) card is
properly inserted in the device.
establish permitted levels of RF energy
for the general population.
The guidelines were developed by
independent scientific organisations
through periodic and thorough
evaluation of scientific studies.
The guidelines include a substantial
2. Press the end key as many times as
needed to clear the display and
ready the device for calls.
87
9243644_6155_en_au.fm Page 88 Wednesday, December 28, 2005 11:28 AM
A d d i t i o n a l s a f e t y i n f o r m a t i o n
safety margin designed to assure the
safety of all persons, regardless of age
and health.
* The SAR limit for mobile devices used
by the public is 2.0 W/kg averaged over
10 grams of body tissue. The guidelines
incorporate a substantial margin of
safety to give additional protection for
the public and to account for any
variations in measurements.
SAR values may vary depending on
national reporting requirements and
the network band. For SAR information
in other regions, please look under
product information at
The exposure standard for mobile
devices employs a unit of
measurement known as the Specific
Absorption Rate, or SAR. The SAR limit
stated in the international guidelines is
2.0 watts/kilogram (W/kg)*. Tests for
SAR are conducted using standard
operating positions with the device
transmitting at its highest certified
power level in all tested frequency
bands. Although the SAR is determined
at the highest certified power level, the
actual SAR of the device while
operating can be well below the
maximum value. This is because the
device is designed to operate at
multiple power levels so as to use only
the power required to reach the
network. In general, the closer you are
to a base station, the lower the power
output of the device.
www.nokia.com.
■ Battery information
This section provides information
about battery charging times with the
Travel Charger (AC-4) and the
Standard Travel Charger (AC-3), talk
and standby times. Be aware that the
information in this section is subject to
change. For more information, contact
your service provider.
The highest SAR value for this device
when tested for use at the ear is
0.64 W/kg.
Charging times
The following charging times are
approximate with the BL-6C
Li-Ion battery:
Travel Charger (AC-4): Up to 1 hour 35
minutes
SAR values may vary depending on
national reporting and testing
requirements and the network band.
Use of device accessories and
enhancements may result in different
SAR values. Additional SAR
Standard Travel Charger (AC-3): Up to
3 hours 45 minutes
information may be provided under
product information at
www.nokia-asia.com.
88
9243644_6155_en_au.fm Page 89 Wednesday, December 28, 2005 11:28 AM
A d d i t i o n a l s a f e t y i n f o r m a t i o n
Talk and standby times
Operation times are estimates only and
depend on signal strength, phone use,
network conditions, features used,
battery age and condition (including
charging habits), temperatures to
which the battery is exposed, and other
factors.
Talk time: 3.5 to 4.0 hours (digital)
Standby time: 6 - 10 days
89
9243644_6155_en_au.fm Page 90 Wednesday, December 28, 2005 11:28 AM
MANUFACTURER’S LIMITED WARRANTY
NOTE! This Limited Warranty is in addition to, and does not affect your legal (statutory) rights under your applicable
national laws relating to the sale of consumer products.
Nokia Corporation (“Nokia”) provides this Limited Warranty to person who has purchased the Nokia product(s) included
in the sales package (“Product”).
Nokia warrants to you that during the warranty period Nokia or a Nokia authorised service company will in a
commercially reasonable time remedy defects in materials, design and workmanship free of charge by repairing or,
should Nokia in its absolute discretion deem it necessary, replacing the Product in accordance with this Limited
Warranty (unless otherwise required by law). This Limited Warranty is only valid and enforceable in the country where
you have purchased the Product provided that it is intended for sale in that country.
Warranty Period
The warranty period starts at the time of Product's original purchase by the first end-user. The Product may consist of
several different parts and different parts may be covered by a different warranty period (hereinafter “Warranty
Period”). The different Warranty Periods are:
a) twelve (12) months for the mobile device and accessories (whether included in the mobile device sales package or
sold separately) other than the consumable parts and accessories listed in (b) and (c) below;
b) six (6) months for the following consumable parts and accessories: batteries, chargers, desk stands, headsets,
cables and covers; and
c) ninety (90) days for the media on which any software is provided,e.g. CD-rom, memory card.
As far as your national laws permit, the Warranty Period will not be extended or renewed or otherwise affected due to
subsequent resale, repair or replacement of the Product. However, repaired part(s) will be warranted for the remainder
of the original Warranty Period or for sixty (60) days from the date of repair, whichever is longer.
How to get warranty service
If you wish to make a claim under the Limited Warranty, you may call the Nokia call center (where this is available and
please note national rates apply to calls) and/or where necessary, return your Product or the affected part (if it is not the
entire Product) to a Nokia care center or Nokia designated service location. Information about Nokia care centers, Nokia
designated service locations and Nokia call centers can be found at local Nokia web pages where available.
You must return your Product or the affected part (if it is not the entire Product) to a Nokia care center or Nokia
designated service location before the expiry of the Warranty Period.
When making a Limited Warranty claim you have to present: a) the Product (or affected part thereto), b) the legible and
unmodified original proof of purchase, which clearly indicates the name and address of the seller, the date and place of
purchase, the product type and the IMEI or other serial number.
This Limited Warranty extends only to the original first end-user of the Product and is not assignable or transferable to
any subsequent purchaser/end-user.
What is not covered?
1. This Limited Warranty does not cover user manuals or any third party software, settings, content, data or links,
whether included/downloaded in the Product, whether included during installment, assembly, shipping or at any
other time in the delivery chain or otherwise and in any way acquired by you. To the extent permitted by applicable
law(s), Nokia does not warrant that any Nokia software will meet your requirements, will work in combination with
any hardware or software applications provided by a third party, that the operation of the software will be
uninterrupted or error free or that any defects in the software are correctable or will be corrected.
2. This Limited Warranty does not cover a) normal wear and tear (including, without limitation, wear and tear of
camera lenses, batteries or displays), b) transport costs, c) defects caused by rough handling (including, without
limitation, defects caused by sharp items, by bending, compressing or dropping, etc.), d) defects or damage caused
by misuse of the Product, including use that is contrary to the instructions provided by Nokia (e.g. as set out in the
Product's user guide) and/or e) other acts beyond the reasonable control of Nokia.
90
9243644_6155_en_au.fm Page 91 Wednesday, December 28, 2005 11:28 AM
3. This Limited Warranty does not cover defects or alleged defects caused by the fact that the Product was used with,
or connected to, a product, accessories, software and/or service not manufactured, supplied or authorised by Nokia
or was used otherwise than for its intended use. Defects can be caused by viruses from your or from a third party's
unauthorised access to services, other accounts, computer systems or networks. This unauthorised access can take
place through hacking, password-mining or through a variety of other means.
4. This Limited Warranty does not cover defects caused by the fact that the battery has been short-circuited or by the
fact that the seals of the battery enclosure or the cells are broken or show evidence of tampering or by the fact that
the battery has been used in equipment other than those for which it has been specified.
5. This Limited Warranty does not apply if the Product has been opened, modified or repaired by anyone other than an
authorised service centre, if it is repaired using unauthorised spare parts or if the Product’s serial number, the
mobile accessory date code or the IMEI number has been removed, erased, defaced, altered or are illegible in any
way and this shall be determined in the sole discretion of Nokia.
6. This Limited Warranty does not apply if the Product has been exposed to moisture, to dampness or to extreme
thermal or environmental conditions or to rapid changes in such conditions, to corrosion, to oxidation, to spillage
of food or liquid or to influence from chemical products.
Other important notices
A third party, independent operator provides the SIM card and cellular and/or other network or system on which the
Product operates. Therefore, Nokia will not accept responsibility under this warranty for the operation, availability,
coverage, services or range of the cellular or other network or system. Before the Product can be repaired or replaced,
the operator may need to unlock any SIM-lock or other lock that may have been added to lock the product to a specific
network or operator. Accordingly, Nokia does not accept responsibility for any delays in warranty repairs or for the
inability of Nokia to complete warranty repairs that are caused by the operator's delay or failure to unlock any SIM-lock
or other lock.
Please remember to make back-up copies or keep written records of all important content and data stored in your
Product, because content and data may be lost during repair or replacement of the Product. Nokia, in a manner
consistent with the provisions of the section entitled “Limitation of Nokia's Liability” below, to the extent permitted by
applicable law(s), shall not under any circumstances be liable, either expressly or impliedly, for any damages or losses of
any kind whatsoever resulting from loss of, damage to, or corruption of, content or data during repair or replacement of
the Product.
All parts of the Product or other equipment that Nokia has replaced shall become the property of Nokia. If the returned
Product is found not to be covered by the terms and conditions of the Limited Warranty, Nokia and its authorised
service companies reserve the right to charge a handling fee. When repairing or replacing the Product, Nokia may use
products or parts that are new, equivalent to new or re-conditioned.
Your Product may contain country specific elements, including software. If the Product has been
re-exported from its original destination country to another country, the Product may contain country specific
elements that are not considered to be a defect under this Limited Warranty.
Limitation of Nokia's liability
This Limited Warranty is your sole and exclusive remedy against Nokia and Nokia's sole and exclusive liability in respect
of defects in your Product. However, this Limited Warranty shall neither exclude nor limit i) any of your legal (statutory)
rights under the applicable national laws or ii) any of your rights against the seller of the Product.
This Limited Warranty replaces all other Nokia warranties and liabilities, whether oral, written, (non-mandatory)
statutory, contractual, in tort or otherwise, including, without limitation, and where permitted by applicable law, any
implied conditions, warranties or other terms as to satisfactory quality or fitness for purpose. To the extent permitted by
applicable law(s) Nokia does not assume any liability for loss of or damage to or corruption of data, for any loss of profit,
loss of use of Products or functionality, loss of business, loss of contracts, loss of revenues or loss of anticipated savings,
increased costs or expenses or for any indirect loss or damage, consequential loss or damage or special loss or damage.
To the extent permitted by applicable law, Nokia’s liability shall be limited to the purchase value of the Product. The
above limitations shall not apply to death or personal injury resulting from Nokia’s proven negligence.
91
9243644_6155_en_au.fm Page 92 Wednesday, December 28, 2005 11:28 AM
Statutory obligations
This Limited Warranty must be read subject to any statutory provisions that imply warranties or conditions into this
Limited Warranty that cannot be excluded, restricted or modified or cannot be excluded, restricted or modified except
to a limited extent. If such statutory provisions apply, to the extent to which Nokia is able to do so, its liability under
those provisions will be limited, at its option to, in the case of goods: the replacement of the goods or the supply of
equivalent goods, the repair of the goods, the payment of the cost of replacing the goods or of acquiring equivalent
goods, or the payment of the cost of having the goods repaired; and in the case of services: the supplying of the services
again or the payment of the cost of having the services supplied again.
NOTE! Your Product is a sophisticated electronic device. Nokia strongly encourages you to familiarise yourself with the
user guide and instructions provided with and for the Product. Please also note that the Product might contain high
precision displays, camera lenses and other such parts, which could be scratched or otherwise damaged if not handled
very carefully.
All warranty information, product features and specifications are subject to change without notice.
Nokia Corporation
Keilalahdentie 2-4
FIN-02150 Espoo
Finland
92
9243644_6155_en_au.fm Page 93 Wednesday, December 28, 2005 11:28 AM
Index
A
C
A few practical rules about accessories Calculator 70
and enhancements 81
Abbreviated dialling 55
About your device viii
Activate 64
Activate a voice command 58
Activate an equaliser set 47
Activate or deactivate 14
Alarm clock 65
Alarm conditions 66
Allow numbers 60
Calendar 66
Call and setup voice mail 27
Call diverting 64
Call duration 30
Call register 29
Call restrictions 61
Call settings 52
Call summary 54
Caller groups 34
Calling card 53
Allow or block advertisements 23
Allow or block multimedia
reception 22
Calls
answering 10
in-call options 11
making 9
An incoming call 10
Answer a call with the keypad
locked 11
Camera 39
Cancel 64
Antenna 6
Anykey answer 52
Care and maintenance 85
Certification information (SAR) 88
Change case and mode 14
Change default number 34
Change other settings 20
Change sending options 20
Change speed dials numbers 35
Change time 71
Application settings 62
Assign a key to speed dials 34
Assign a voice tag to a command 58
Assign a voice tag to an entry 35
Authenticate hologram 83
Automate voicemail 27
Automatic redial 52
Charger
connecting 8
information 82
B
times 89
Back cover
Choose a banner 50
Choose Go to functions 5
Clear the cache 76
Clear voice mail icon 28
Collections 77
removing 7
replacing 8
Backlight time-out 50
Backlight timeout 50
Batteries and chargers 82
Battery 6
Colour schemes 50, 51
Compose and send 15
Conference calling 10
Configure settings 38
Connection indicator 57
Connectivity 57
charging 8
charging times 89
information 82, 89
removing 7
replacing 7
Contacts list 10, 33
talk and standby times 90
Battery information 82
Business cards 38
add 33
delete 37
edit 36
93
9243644_6155_en_au.fm Page 94 Wednesday, December 28, 2005 11:28 AM
send 38
H
view 37
Handsfree 59
Countdown timer 71
Create a custom equaliser set 47
Currency converter 70
Hands-free operation 58
Headset 9, 59
Hearing aids 87
Help x
D
Help text 4, 56
Data or fax calls 54
Data transfer 54
Date and time auto-update 52
Date setting 52
I
Indicators and icons 2
Infrared 57
Delete a single message 19
Delete all messages in a folder 19
Delete speed dials numbers 35
Deleting call registers 30
Dial a number 36
Insert dialling codes 28
International prefix 55
Interrupt timer 71
Dialling codes 28
K
Display language 55
Display settings 49, 50
Distribution list 19
Keyguard 12
automatic 55
Keypad 9
DTMF tones 56
Keys and parts 1
E
L
Emergency calls 88
while using wireless Internet 75
with keypad locked 56
Enhancement settings 59
handsfree 59
Languages 55
Lap and split times 72
Last dialed number 10
Listen to voice messages 27
Lock code 61
Lock code security settings 4
Lock the keypad 12
Loudspeaker 11
headset 59
music stand 59
Enhancements 81
ESN x
Extras 77
M
Make calls 54
F
Manufacturer’s limited warranty 91
Measure time 72
Media equaliser 47
Media player 44
Factory settings 64
Feature codes 63
Find your phone label x
Folders 42
Medical devices 86
Memory 55, 77
G
Message folders 18
Messages 15
Gallery 42, 44
Games 77
delete 19
minibrowser messages 28
text messages 15
voice messages 26
Minibrowser 74
Go to a date 66
Go to functions 5
94
9243644_6155_en_au.fm Page 95 Wednesday, December 28, 2005 11:28 AM
Minibrowser duration 32
Minibrowser messages 28
MMS folders 23
Punctuation and special characters 13
Q
MMS settings 22
Mobile web 74
Quick keys 2
Mode 63
Multimedia messages 21
Music stand 59
R
Radio 44
Read message 16
N
Read multimedia messages 25
Receive calendar notes 68
Record a video clip 40
Record speech or sound 46
Repeat alarm 65
Navigate the mobile Internet 75
Network services viii, 63
Nokia battery authentication
guidelines 83
Reply to message 17
Nokia PC Suite 79
Reply to multimedia message 26
Restore factory settings 64
Retrieve or reject multimedia
messages 23
Nokia support and contact
information x
Note a specific date 66
Notes 68
Ringing tone for no caller ID 55
Roaming options 63
Numbers (123) 13
O
S
Open 66
Safety vii
Open fold to answer 53
Operating environment 86
Operation note 72
important safety information 86
Save an entry 33
Save contact name and number 33
Save contact number only 33
Save information 53
Save messages 18
Save numbers and text items 33
Screen saver 49, 50
Scrolling 3
Options 17, 45, 46, 58, 73
Options while viewing a list of notes
67
Organiser 65, 65–69
Other MMS settings 23
P
Search for a name 38
Security settings 60
Self-timer 41
Send a business card 38
Send a note 68
Send and receive data 57
Set
PACEMAKERS 86
PC connectivity 78
Personalise a profile 48
Phone at a glance 1
Phone keys 75
Phone lock 60
change lock code 61
Phone menus 3
time 52
Set length 56
Phone numbers with dialling codes 27 Set or change alarm setting 65
Phone settings 55
Set the alarm tone 65
Potentially explosive environments 87 Set the timer 71
Power saver 49, 51
Predictive text 13
Preferred carrier 52
Profiles 48
Set type 56
Setting up phone 6
Settings 41, 48
Shared memory ix
95
9243644_6155_en_au.fm Page 96 Wednesday, December 28, 2005 11:28 AM
Snooze time-out 65
Speed dial 53
saved messages 18
to-do note 69
Speed dials 34
View notes (day view) 67
Voice dialling 35, 57
Voice messages 26
Voice privacy 62
Voice recorder 46
Voice tags 36
Standard mode 13
Standby mode 2
Start-up tone 56
Stopwatch 71
Voicemail 26
T
Volume
Taking photo 39
adjusting 11
Talk and standby times 90
Templates 17
using the loudspeaker 11
Text (Abc) 13
W
Text entry 13, 14
predictive text 13
standard 13
Wallpaper 49, 50
Wireless Internet 74
make an emergency call 75
receive a call while online 75
sign off 76
Text messages 15
Themes 49
Time and date settings 52
Timed profiles 48
To-do list 69
sign on 75
Write and send multimedia
messages 24
Write down voice mailbox number and
process 27
To-do note
add 69
view 69
Tone settings 51, 62
Transfer with Windows Explorer 78
Tune and save a radio channel 46
Turn an alarm off 66
Turn phone off 9
Turn phone on 9
Turn the radio on and off 45
U
UIM card slot 7
Unlock the keypad 12
USB data transfer 78
V
Vehicles 87
Video ringing tone 55
View
call duration 30
call times 30
data/fax call duration 31
dialled numbers 30
minibrowser duration 31
missed calls 29
received calls 29
96
|