’
OWNER S
MANUAL
282
Keys
and
Scrolls through menu
functions and Phone
Book. Adjusts earpiece
volume during a call.
When held, scrolls
continuously.
Retractable
antenna
(not visible --
extend fully during
calls)
LED indicator
Flashes fast for
incoming calls.
Flashes slowly
when phone is in
service.
CLR
Erases characters or
clears display.
Backsteps one menu
level.
OK
Confirms and
selects choices
on display. Finds
a Phone Book
entry by name.
Profiles
Selects a profile
(group of preset
sound settings).
During a call, adjusts
earpiece volume.
MENU
Enters the menu.
SEND
Dials the phone
number on the
display. Answers a
call.
END
Ends the call. When
not in a call, exits
the current function
and clears the
display. Activates
Keyguard when
0-9, !, and #
Number and
character keys.
pressed and held.
PWR
#
A long press turns the
phone on or off.
A short press stops the
phone’s ringing
Shows the Life Timer
when pressed and
held.
without answering the
call.
Contents
1. For Your Safety . . . . . . . . . . . . . . . . . 1
FCC/Industry Canada Notice . . . . . . . . . . . . . . . . . . . . . 2
Using this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Quick Start . . . . . . . . . . . . . . . . . . . . 3
Opening the phone cover. . . . . . . . . . . . . . . . . . . . . . . . 3
Making your first call. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Changing the Profile (sound settings) . . . . . . . . . . . . . 3
Volume adjustment of earpiece. . . . . . . . . . . . . . . . . . . 3
Using the cover to answer and end calls . . . . . . . . . . . 4
The Ready screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Quick Save (saving Phone Book entries). . . . . . . . . . . . 4
Quick Find (finding Phone Book entries) . . . . . . . . . . . 4
3. Display Indicators . . . . . . . . . . . . . . . 5
4. Battery Information . . . . . . . . . . . . . . 7
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . 10
Important Battery information . . . . . . . . . . . . . . . . . . 10
5. The Basics . . . . . . . . . . . . . . . . . . . . 12
Opening the phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Switching the Phone on and off . . . . . . . . . . . . . . . . . 12
Welcome note. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Selecting a network . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting the earpiece volume . . . . . . . . . . . . . . . . . . 16
Last number redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1-Touch dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Emergency 9 dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Keyguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Selecting the Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
i
Calling card calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PIN calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Voice and text messages. . . . . . . . . . . . . . . . . . . . . . . 22
What is Prepaid Mode?. . . . . . . . . . . . . . . . . . . . . . . . 22
6. The Phone Book . . . . . . . . . . . . . . . . 23
Saving entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Viewing entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using the Notepad memory . . . . . . . . . . . . . . . . . . . . 27
Moving an entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Erasing an entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Editing an entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using the VIP feature . . . . . . . . . . . . . . . . . . . . . . . . . 28
7. Menu features . . . . . . . . . . . . . . . . . 29
Menu summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Accessing the menus. . . . . . . . . . . . . . . . . . . . . . . . . . 30
Phone Book (Menu 1) . . . . . . . . . . . . . . . . . . . . . . . . . 31
Call Log (Menu 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Phone Settings (Menu 3) . . . . . . . . . . . . . . . . . . . . . . 36
Security Settings (Menu 4). . . . . . . . . . . . . . . . . . . . . 41
Call Settings (Menu 5) . . . . . . . . . . . . . . . . . . . . . . . . 42
Lock Phone (Menu 6) . . . . . . . . . . . . . . . . . . . . . . . . . 48
Messages (Menu 7) . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Debit (Menu 8, 282P only) . . . . . . . . . . . . . . . . . . . . . 50
Prepaid (Menu 9, 282P only) . . . . . . . . . . . . . . . . . . . 54
8. Data and Touch Tones . . . . . . . . . . . . 59
Data Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Sending touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Using the Flash function. . . . . . . . . . . . . . . . . . . . . . . 61
9. Network Services . . . . . . . . . . . . . . . 63
Availability of network services . . . . . . . . . . . . . . . . . 63
Calling Line Identification . . . . . . . . . . . . . . . . . . . . . 63
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Message Waiting (Voicemail) . . . . . . . . . . . . . . . . . . . 65
Digital Message Service (Nokia 282 NAMPS only) . . 65
ii
10. Accessories . . . . . . . . . . . . . . . . . . . 68
11. Reference Information . . . . . . . . . . . 73
12. Troubleshooting . . . . . . . . . . . . . . . . 79
13. Technical Information. . . . . . . . . . . . 80
14. Warranty. . . . . . . . . . . . . . . . . . . . . 81
15. Index . . . . . . . . . . . . . . . . . . . . . . . 86
iii
1. For Your Safety
Read these simple guidelines before using
your phone. Failure to comply with these
guidelines may be dangerous or illegal.
For more detailed safety information, see
Road Safety Comes First
Don’t use a hand-held phone while driving;
park the vehicle first.
Switch Off In Hospitals
Follow any regulations or rules. Switch phone
off near medical equipment.
Switch Off On Aircraft
Mobile phones can cause interference. Using
them on aircraft is illegal.
Switch Off When Refueling
Don’t use phone at a refueling point. Don’t
use near fuel or chemicals.
Switch Off Near Blasting
Don’t use the phone where blasting is in
progress. Observe restrictions, and follow any
regulations or rules.
Interference
All wireless phones may get interference
which could affect performance.
Use Sensibly
Use only in the normal position (to ear). Don’t
touch the antenna unnecessarily.
Qualified Service
Only qualified service personnel must install
or repair equipment.
Accessories and Batteries
Use only approved accessories and batteries.
Do not connect incompatible products.
1
For Your Safety
FCC/Industry Canada Notice
Your phone may cause TV or radio interference
(e.g. when using a telephone in close proximity to
receiving equipment). The FCC/Industry Canada
can require you to stop using your telephone if
such interference cannot be eliminated. If you
require assistance, contact your local service
facility.
This device complies with part 15 of the FCC
rules. Operation is subject to the condition that
this device does not cause harmful interference.
Using this Guide
The wireless phone described in this guide is
approved for use in AMPS and NAMPS networks.
A number of features included in this guide are
called Network Services. They are special services
provided by wireless service providers. Before you
can take advantage of any of these Network
Services, you must subscribe to the service(s)
from your home service provider and obtain
instructions for their use.
Accessibility
For information concerning accessibility options
for your Nokia 282, please refer to page 85 of this
manual for Nokia Contact information, or inquire
by TTY at 1-800-246-6542 (1-800-24NOKIA).
2
For Your Safety
2. Quick Start
Opening the phone cover
To prolong the life of your phone, hold it in one
hand while opening the cover with the other hand.
Making your first call
2 Give PWR a long press to switch on your
phone. Wait for the signal indication to appear.
3 Enter the area code (if needed) and the phone
number, then press SEND.
4 To end the call, press END or close the cover.
Note: If you make a mistake entering the phone number,
to clear the last digit give CLR a short press, or to clear
the entire number, give CLR a long press or press END.
Changing the Profile (sound settings)
You can easily change the profile, which is a set
of predefined sound and alert settings. (This is
simpler and quicker than changing these sound
settings using the menu.)
• Press
repeatedly until the profile you want
is next to the pointer, then press and hold the
description of the Profiles.
Note: You cannot change the profile when in a call.
Volume adjustment of earpiece
• When in a call, to increase volume, give
a
a
short press, or to decrease volume give
long press. Or, press the
or
keys.
3
Quick Start
Using the cover to answer and end calls
• You can answer incoming calls by opening the
cover if the Active Cover menu feature is set
to On. (See “Active Cover (Menu 3 12)” on
page 40).
Note: To prolong the life of your phone, hold it in one
hand while opening the cover with the other hand.
• You can end a call by closing the cover.
The Ready screen
When you see the term “Ready screen” in this
manual, it means the phone’s display is free of
phone numbers, names, and menu items. Many of
the functions require that you start with the
“Ready screen”. To do this:
• Give END a (short) press, or CLR a long press.
(Don’t press END to return to idle when in a
call because this will end the call.)
Status indicators such as KEYGUARD ACTIVE,
ROAMING, or the name of the profile you’re using may
appear on the Ready screen and can’t be cleared.
Quick Save (saving Phone Book entries)
1 At the Ready screen, enter the area code (if
needed) then the phone number, then press OK.
2 At the Save Name: prompt, enter the name
then press OK twice.
Note: It’s better to use short names (i.e., no more than 10
characters). Entries with short names and numbers fit on
a single screen in the Phone Book.
Quick Find (finding Phone Book entries)
1 At the Ready screen, press OK.
2 At the Find name: prompt, enter the first
letter(s) of the name then press OK.
4
Quick Start
3. Display Indicators
AB
ABC
Shows which type of system your phone will
use when it is roaming (see also the table
Your phone is using the Home system (see also
the table “System selection and display indica-
You have an active call.
You can enter letters or view names.
You have one or more voice messages waiting.
You have one or more text messages waiting.
Blinks when Messages list is full.
Indicates menu, or Phone Book location num-
ber, or number of unheard voice messages.
and bar indicate the cellular signal strength at
the location where you are using your phone.
and bar indicate the battery charge level.
When the battery is fully charged, the whole
bar is displayed.
Points to an item which may be selected (scroll
to choose another item) - press OK to select.
Indicates overflowing menu items or Phone
Book entries (scroll to view the next or
previous screen).
5
Display Indicators
Signal strength indication
A cellular phone sends and receives radio signals.
As with all radio equipment, the quality of radio
reception depends on the strength of the radio
signal in the area where you are operating your
phone.
The strength of the cellular signal is
shown by the vertical bar on the left-
hand side of the display. The higher the
bar, the stronger the signal at your
present location, and the more likely you
are to get good call quality.
When NO SERVICE is displayed, the
phone is either outside of the cellular
service area or restricted from entering service,
and calls cannot be made or received.
If the signal is poor and you are using the phone
in a building, you may get better reception near a
window.
IMPORTANT! The phone can make and receive calls
only when:
• It is switched on, and
• It is located in the cellular service area, and
the radio signal strength is adequate.
6
Display Indicators
4. Battery Information
Your phone is powered by a rechargeable Lithium-
Ion battery. Use only batteries approved by the
phone manufacturer and recharge your battery only
with the chargers approved by the manufacturer.
Note: A new battery must be charged before use.
Installing the Battery
1
2
3
1 Slide the battery cover down slightly, then lift
it off.
2 Put the battery in the space on the back of the
phone. Align the battery contacts with the
contacts in the phone.
3 Put the battery cover in the guides on the
phone, then slide it into position.
7
Battery Information
Charging the Battery
1 Connect the lead from the charger to the bottom
of your phone, or place the phone in the Compact
Desktop Charging Stand (optional accessory).
for more charging options.
2 Plug the charger into a standard wall outlet.
When charging starts, the
segments of the battery
indicator scroll and the
phone beeps once.
After the segments of the
battery indicator stop scrol-
ling and all segments are displayed, the
battery is fully charged.
Charging times (specified below) depend on
the charger used.
3 Disconnect the charger from the power outlet
and phone.
You can use the phone during charging, but
charging is reduced for the duration of the call.
Note: In a call, charging stops completely if you are
using the Standard Travel Charger (ACP-7U).
If the battery is too hot or cold, the charging may
be interrupted until the battery reaches its nor-
mal operating temperature.
Charging times
The battery charging times shown in the follow-
ing table are approximate.
Standard
TravelCharger
ACP-7U
Rapid Travel Rapid Cigarette
Charger
ACP-9U
Lighter Charger
LCH-9
4 hours
2 hours
2 hours
8
Battery Information
Talk and Standby times
Battery operation times depend greatly on how
you use the phone, as well as on the coverage of
the network and network parameters set by the
wireless service provider. Typical times are shown
in the table.
Talk Time
Standby Time
100 minutes
30 hours
Battery Low warning
The phone says BATTERY
LOW and gives a warning
tone when the battery charge
is low and only a few minutes
of talk time remain.
The repetition rate of the battery low warnings
depends on the remaining battery capacity and
the battery condition.
When the battery charge is too low for the phone
to work, the phone displays RECHARGE BATTERY,
then beeps, then shuts itself off.
Charge the battery as described earlier in this
section.
9
Battery Information
Removing the Battery
1
2
Note: Switch off the phone’s power before removing the
battery!
1 Slide the battery cover down slightly, then lift
it off.
2 Lift the battery out.
Important Battery information
• Use only batteries and chargers approved by
the phone manufacturer.
• When a charger is not in use, disconnect it
from the power source. Do not leave the bat-
tery connected to a charger for longer than a
week, since overcharging may shorten its life.
• If left unused, a fully charged battery may lose
some if its charge over time.
• Never use any charger or battery that is
damaged or worn out.
• Use the battery only for its intended purpose.
• Do not short circuit the battery. Accidental
short circuiting can occur when a metallic
object (e.g. coin, clip or pen) causes direct
10
Battery Information
connection of the + and - terminals of the
battery (metal strips on the side of the
battery), for example, when you carry a spare
battery in your pocket or purse. Short circuit-
ing the terminals may damage the battery or
the connecting object.
• Leaving the battery in hot or cold places, such
as in a closed car in summer or winter condi-
tions, reduces the capacity and lifetime of
the battery. Always try to keep the battery
between 59°F and 77°F (15°C and 25°C).
A phone with a hot or cold battery may tem-
porarily not work, even if the battery is fully
charged, or it may temporarily not charge.
Li-Ion battery performance is particularly
limited in temperatures below 32°F (0°C).
• Temperature extremes affect the ability of
your battery to charge; allow it to cool down
or warm up first.
• When the battery is not in use, store it
uncharged in a cool, dark and dry place.
• The battery is a sealed unit with no service-
able parts. Do not attempt to open the case.
• The battery can be charged and discharged
hundreds of times but will eventually wear
out. When the operating time is shorter than
normal, it is time to buy a new battery.
• Do not dispose of a battery in a fire!
• Dispose of used batteries in accordance with
any local laws and regulations.
11
Battery Information
5. The Basics
Opening the phone
To prolong the life of your phone, hold it in one
hand while opening the cover with the other
hand.
Switching the Phone on and off
• Press the PWR key for about one second.
If Keyguard is active, you need to deactivate it
before you can turn the phone off.
If the display shows LOCKED, press MENU and
enter your 4-digit lock code.
Welcome note
Your dealer may have stored a welcome note in
your phone (such as the dealer’s name). If not,
your phone number is displayed. If you want to
replace the dealer’s welcome note with your own,
Note: The welcome note is specific to your currently
selected phone number.
Selecting a network
Your phone operates on specific networks and
sometimes it must choose which system to use.
This can happen, for example, if you leave the
area where you have signed up for service.
If you want your phone to work only in certain
types of networks (for example, to take advantage
of certain billing agreements between systems),
you can specify this using “Carrier Selection
12
The Basics
Making a call
1 Extend the phone’s antenna fully.
2 Enter the area code (if needed) and the phone
number, then press SEND. If you make a
mistake dialing, press CLR to erase digits one
by one. Press and hold CLR or press END to
clear the whole display.
A phone symbol appears
on the display. The call is
CALL
connected when the
phone number disappears
from the display and CALL
appears.
For international calls: You can enter a ‘+’ at the
beginning of a number by pressing !!. Then enter
the country code and number, then press SEND.
The ‘+’ expands to the international dialing code
prefix.
To dial a number stored in the Phone Book:
From the Ready screen press
or
until the
Phone Book entry is displayed, then press SEND.
NO SERVICE appears and the phone beeps if you
try to make a call when your phone is outside the
cellular service area.
CALL NOT ALLOWED appears if you try to
make a call that is restricted (see “Allowed Calls
(Menu 5 1 2)” on page 45), or the phone is locked.
If you receive a call when you’re trying to make a
call, the incoming call comes through and the
outgoing call is cancelled.
NORMAL POSITION: Hold the phone as you would any
other telephone, with the antenna pointed up and over
your shoulder.
13
The Basics
TIPS ON EFFICIENT OPERATION: Extend your antenna
fully when in calls. As with any other radio transmitting
device, avoid unnecessary contact with the antenna
when the phone is switched on. Contact with the
antenna affects call quality and may cause the phone to
operate at a higher power level than otherwise needed.
WARNING! Do not switch on the phone when wireless
phone use is prohibited or when it may cause interference
or danger.
Ending a call
• Press END, or
• Close the cover, or
• If you’re using the headset (HDC-3P), press
the answer/end button on the headset cord.
Note: If you give END a long press, you’ll activate
Answering a call
• Press SEND, or any key except END or PWR,
or
• Open the cover if Active Cover is On. (See
Note: To prolong the life of your phone, hold it in one
hand while opening the cover with the other hand.
To answer a waiting call (normally indicated by a
beep), press SEND.
Note: Call Waiting is a network feature. You need to
subscribe to it through your service provider.
• To stop the ringing without answering the
call, press PWR briefly or press END.
14
The Basics
• To answer the call while using the headset
(HDC-3P), press the answer/end button on the
headset cord, or press SEND on the keypad.
Make sure the antenna is fully extended during
the call.
Note: If Keyguard is active, a call can only be answered
by pressing SEND, including when you are using the
headset.
When there is an incoming
call CALL flashes on the dis-
play and the LED indicator
CALL
flashes. The phone’s ringing
sound (and vibration)
depends on the Profile you’re using. See “Selecting
You can answer a call any time, even while using
Keyguard, Phone Book or menu functions.
If you don’t answer a call, the message 1
MISSED CALL or ‘n’ MISSED CALLS appears on
the display. Press CLR to clear the display. If you
have subscribed to voicemail, the call will be
transferred to your voice mailbox (see "Message
Or, press OK,
or
to view the Missed Calls
List. The phone automatically stores the caller’s
number (if available) in the Missed Calls list (see
“Missed Calls (Menu 2 3)” on page 35). The list
first tells you the number of new numbers in the
list. Wait a few seconds for the most recent num-
ber to appear or press
to scroll the list.
Calling Line Identification
If you are a subscriber to a network that supports
Calling Line Identification your phone may dis-
play the caller’s number or name when the phone
rings. (The name appears only if the name and
number are stored in the Phone Book). For more
15
The Basics
details, see “Availability of network services” on
Adjusting the earpiece volume
• During a call, press
quickly to increase the
volume, or press and hold
to decrease the vol-
ume. Or, press
or
.
Last number redial
• From the Ready screen, press SEND. The last
number dialed appears. Press SEND again to
initiate the call.
Last 15 Dialed Calls
• From the Ready screen, press SEND, then press
or
repeatedly until you see the number
you want. Then press SEND to dial it.
more information.
Speed dialing
• Enter the number of the Phone Book location
(1-75) where the phone number is stored,
then press SEND.
If the Phone Book location is empty, the message
LOCATION EMPTY appears.
1-Touch dialing
If 1-Touch Dialing is set to On, you can dial the
phone number stored in any of the Phone Book
locations 1-8 by pressing a single key:
• Press the required number key (1-8) for about
two seconds.
Note: Use location 1 for your Voice Mailbox Number.
16
The Basics
Emergency 9 dialing
The 9 Key is reserved for an Emergency Number
that is programmed into your phone by your dealer.
• Press the 9 key for about 2 seconds.
Emergency 9 Dialing must be set On for this to work! See
Note: Official emergency numbers vary by area (e.g., 911
or another official emergency number). However, only
one emergency number is programmed into your phone
to be dialed automatically by Emergency 9 Dialing, and
this may not be the proper number in all circumstances.
Note: Emergency 9 Dialing does not operate when
Keyguard is activated. However, an emergency call can
be made without deactivating Keyguard by entering the
whole emergency number programmed into your phone
and then pressing SEND.
Keyguard
• To activate Keyguard, press END for a few
seconds (or press MENU then !).
• To deactivate Keyguard, press MENU then !.
Keyguard lets you “lock” your phone’s keypad
so that keys don’t accidentally get pressed
(e.g. when the phone is in a pocket or a purse).
KEYGUARD ACTIVE remains (or reappears) on
the display until any key is pressed or Keyguard
is deactivated.
Answering a Call with Keyguard Active
• Press SEND.
During the call, the keypad is automatically unlocked
and the phone can be used normally. After the call
is ended, Keyguard is automatically activated again.
Switching off your phone with Keyguard Active
Open the phone, deactivate Keyguard (press MENU
then !), then switch the phone off as usual.
17
The Basics
Or, if the phone is ringing and Keyguard is active,
you can press and hold PWR to switch off the
phone while it is ringing.
Making an emergency call with keyguard active
• Enter the emergency number preprogrammed
in your phone and press SEND.
The emergency number shows up on the display
after you have entered it completely.
Note: When Keyguard is activated, calls may be possible
to the emergency number programmed into your phone
(e.g., 911 or another official emergency number).
However, Emergency 9 Dialing does not operate.
Note: Keyguard is not a security feature and will not
prevent unauthorized use of your phone.
Selecting the Profile
A profile is a group of preset sound settings. You
can choose the profile that works best for you.
The only changeable profile is My tones. All of the
other profiles are set to the values shown in the
table (and cannot be viewed using the menu). To
change settings in My tones, simply use the menu
or volume control for each item in the profile.
Normal Loud
Silent
Quiet
Car
Profile Profile Profile Profile Profile
Ringing
Options
Ring+ Ring+ N/A
Vibra Vibra
Beep+ Ring
Vibra
Ringing
Volume
Level 4 Level 5 None
None
Level 5
Keypad
Tones
Level 2 Level 3 Off
Level 1 Level 3
Roam
Beep
*
*
Off
Off
Off
*
Message Short
Alert Tone
Long
Vibra
Only
Short
*
Earpiece
Volume
Level 4 Level 5 Level 4 Level 4
18
The Basics
* These items are as you set them using the menu or the
volume control. You can set all of the settings in the My
tones profile.
To select a profile:
1 At the Ready screen, press
.
2 Press
(or use
again repeatedly
or ), to move
the pointer to the profile
you want.
3 Press OK or press and hold
to choose it.
For profiles other than
Normal, the phone displays
the profile you are using.
(Sometimes the profile name
is replaced by a status
message like LOCKED).
Note: When you’re in a call, pressing
changes the
earpiece volume, and you can’t change profiles.
Useful information about the Profile feature
• Settings for all the profiles except My tones
are fixed. You cannot view the settings in the
menu. The values in the menu are only for My
tones.
• If you use the menu to change any of the
profile settings, the profile will automatically
change to My tones, and any changes affect
My tones only.
• The phone remains set to a profile until you
select a different one.
• When you select the profile feature, you exit
any current menu or Phone Book operation.
• If you connect the phone to an Advanced Car
Kit, the Car profile is selected automatically,
and Car appears in the displayed list of
19
The Basics
profiles. When you remove the phone from the
Car Kit, the phone reverts to the profile
selected before you used the Car Kit.
• If a headset is connected to the phone, then
the current profile remains selected, but the
earphone level is adjusted automatically
(and remains selected until the headset is
removed). Don’t connect a headset when the
phone is in the Advanced Car Kit (you will hear
an error tone).
• The Vibra Ringing Option will be disabled when
the phone is connected to a charger or a car kit.
Calling card calls
If you use the phone’s Calling Card storage feature
charge long-distance calls to a calling card. You
won’t need to enter the Calling Card information
when you want to make a card call.
Note: No physical credit cards are needed in order to
direct the call charges to the credit card; however you
must first store and select a Calling Card with Menu 5 2!
To make a calling card call:
1 Enter the phone number.
2 Press SEND for 2 seconds. The phone displays
CARD CALL (and the card name if entered).
The message will change to WAIT FOR TONE,
THEN PRESS ‘OK’.
3 When you hear a tone or voice prompt, press
OK or SEND. The phone may ask you again to
WAIT FOR TONE, THEN PRESS ‘OK’.
4 If you get another tone or voice prompt, press
OK or SEND again.
The call is then made, and the phone displays
CARD CALL and the name of the card (if it is has
a name).
20
The Basics
You can make calling card calls in conjunction
with PIN calls.
PIN calls
‘PIN Call’ is a network security feature that
requires a PIN Code every time you make a call.
You can activate or deactivate it and specify the
numbers in your PIN Code. Please check with
your operator for the availability of PIN Calling in
your network.
Note: If you are using the phone in an area that doesn’t
require PIN dialing, deactivate PIN Call.
Activating PIN call
1 Enter * # 7 4 6 2 2 5 5 # (spells PINCALL).
2 Enter your four-digit PIN
Code, which is provided by
PIN code:
your network operator.
Press OK. The phone briefly
displays PIN CALL ON.
Making PIN Calls
The phone displays PIN CALL.
2 After you hear a tone, press SEND again.
The phone displays SENDING PIN.... If the
message remains on the display, press SEND
again to resend the PIN code. Wait for your
call to be connected.
Note: If you’re in a network that doesn’t support PIN
Calls, but your phone has PIN Call On, the phone still
tries to send a PIN. Press CLR to end the PIN Call attempt.
Note: When the phone is set to PIN CALL ON, a call to
the emergency number programmed into your phone
(e.g., 911 or another official emergency number) will be
dialed as a normal call without the PIN code request.
21
The Basics
Deactivating PIN call
• Follow the steps in “Activating PIN Call”, but
don’t enter your PIN Code at the prompt; just
press OK.
The phone briefly displays PIN CALL OFF.
Voice and text messages
If you subscribe to voicemail, callers can leave
you voice messages which you can recall from
your voice mailbox.
If you have purchased the Nokia 282 NAMPS
version and subscribe to a text message network
service, callers may send you short text messages
that you can read on your phone’s display.
For more details, see “Network Services” on
What is Prepaid Mode?
®
To activate your phone through TRACFONE
prepaid service, call the toll free number on the
card included with this Owner’s Manual.
If you activate your phone through TRACFONE
prepaid service, see “Debit (Menu 8, 282P only)”
on page 50 for information on the features
available.
Important note: You cannot activate your phone
through TRACFONE if you already have an existing
cellular service contract.
Note: If you activate your phone through TRACFONE,
contact TRACFONE Customer Service with questions
regarding any of your phone’s prepaid features.
Or, your service provider may offer prepaid
service compatible with your new Nokia phone.
features that may be available to you. Contact
your service provider for details.
22
The Basics
6. The Phone Book
The Phone Book can store up to 75 phone numbers
and names. It also has a “notepad” where you can
store one additional temporary number and name.
The maximum number of Phone Book entries
depends on how much information you store in
each entry. The more information you store per
entry, the fewer entries you can have. The phone
holds 75 entries if the average entry size is about
10 digits and 12 characters.
This section includes details for using the Phone
Book. You can also use Menu 1 to find, save, edit,
and erase stored Phone Book entries. See “Phone
Saving entries
Quick save
1 At the Ready screen, enter the area code (if
needed) then the phone number, then press OK.
2 At the Save Name: prompt, enter the name
Note: Identical names cannot be stored in the Phone
Book. If you try to store a name that is already stored,
the phone will ask if you want to replace the entry. To do
this, at REPLACE? (followed by the name), press OK.
If you don’t want to replace the contents, re-enter the
information using a slightly different name, then save
again.
Entering names
1 When Save Name: and the
indicator
appear, you can enter letters by pressing the
keypad keys a certain number of times, as
indicated in the table on the next page.
23
The Phone Book
Note: If you keep the name short,
then the entire entry (both name
and number) can fit on one screen.
AB
JOHN
HARRISON
1234567
2
and
move the
cursor. CLR backspaces
(and erases). To clear the whole display, press
and hold CLR.
1
press
2
3
4
5
Key
presses
presses
presses
presses
1
2
3
4
5
6
7
8
9
1
A
D
G
J
1
B
E
1
C
F
I
1
2
3
4
5
6
S
8
Z
1
A
D
G
J
H
K
N
Q
U
X
L
M
P
O
R
V
Y
M
7
T
T
W
9
Moves the cursor to the next space
immediately.
]
#
Adds a space between letters.
Punctuation marks
Press 0 repeatedly until you get the punctuation
mark you want:
- ? !
,
. : “ ‘ & $ (
)
0
The cursor
You can either wait second for the cursor to
move to the next space or you can press ! to
force it to the next space.
24
The Phone Book
Phone Book location 75
This is a special Phone Book location. If you store
a number in location 75, you can make calls to
that number even if the phone is locked. See
Note: Location 75 may not be available if there is no
space remaining in the Phone Book. This can happen if
other locations contain long names and numbers.
Special characters in stored numbers
In stored numbers, you can include a 2.5 second
pause (‘p’), a wait (‘w’), or a link to another Phone
Book location (‘+’). These are used to automate
the sending of Touch Tones.
• To enter a Pause (p), press
AB
!!!. Note that a ‘p’
appears on the display, but
P
this is different from just
keying in the letter ‘p’.
• To enter a Wait (w), press !!!!.
• To enter a link (+) to another location, press
!!. A ‘+’ in the middle of a string links to
another location.
Note: A ‘+’ at the beginning of a number is used for
more information.
Linking two Phone Book locations for long
touch-tone strings:
1 Store the phone number that will be linked
and remember its location number.
2 Store the Touch Tone string in another
location and remember its location number.
3 Recall the phone number from the phone book.
25
The Phone Book
4 Press OK until you see Edit No:. Press !!.
The ‘+’ character is displayed after the phone
number.
5 Enter the location number (one or two digits)
of the Touch Tone string (from Step 2).
Store the new contents (phone number, ‘+’,
and Touch Tone location). When the phone
displays SAVE IN LOCATION? enter the
location number from Step 1 and press OK.
For details on sending Touch Tones, see “Sending touch
Making a call using the two joined locations:
1 Recall the first location and press SEND.
This dials the phone number, but the dialing
stops at the ‘+’ character.
2 When the call is established, press MENU
SEND. The phone will automatically send the
Touch Tone string in the second location
(which is displayed).
Viewing entries
You can look for an entry by its name or location
number, or you can just scroll through all the
stored names and numbers.
Longer entries may be shown
on two or three screens, as
JAMIE
WILLIAMS
OFFICE
indicated by the down ( ) or
up ( ) overflow indicators.
When you see these, press
or
to view the other part of the entry.
With (any part of) the entry
displayed, to make a call to
the number in the entry press
SEND.
0123456789
987654321
26
The Phone Book
Searching by name
1 At the Ready screen, press OK.
2 Find name: and
appear. Enter the first
letter(s) of the name, then
press OK.
3 The nearest match in the
Phone Book will be displayed. From here, press
or to scroll other entries (unless in a call).
Finding an entry by location number
If you know the entry’s location number:
• Enter the one- or two-digit number
(1-75) then press
or
.
For example, to recall the name and number in
location 20, enter 2 0 then press . Keep
pressing the arrow keys to view other phone
book entries.
Scrolling through the whole Phone Book
• From the Ready screen, press
or
repeatedly.
Using the Notepad memory
Saving an entry in the Notepad
• Enter the name and number normally, then
when SAVE IN LOCATION? is displayed, press
# then press OK.
Viewing the entry in the Notepad
• From the Ready screen, press # then
to
view the number.
Note: The number you store in the notepad remains
there until you store another number in the notepad.
27
The Phone Book
Moving an entry
1 Recall the name and number. Press OK.
2 At Edit name: press OK, and at Edit No: press
OK.
3 At SAVE IN LOCATION?, enter the new
location number then press OK. The phone
will display MOVE?.
4 Press OK to move or press CLR to exit without
moving.
Erasing an entry
Editing an entry
Using the VIP feature
You can personalize your
phone so that it rings with a
JOE SMITH
VIP
CALLING
special “fanfare” tone when
you receive a call from one of
three specific numbers that
you tag as “VIP” in the Phone Book. The phone
also displays VIP when ringing.
on “tagging” VIP entries.
If you have selected the Quiet profile, the ringing
increases from Level 1 to Level 5 for VIP ringing
(instead of the usual Beep+Vibra used in the
Quiet profile).
28
The Phone Book
7. Menu features
The phone’s menus and submenus give you access
to many features, including customizing your
phone. Instructions for using the menus follow
the table.
Menu summary
1 Phone Book
4 Security Settings
1
2
3
4
5
6
Find Entry
Save Entry
Edit Entry
Erase Entry
Phone Book Status
VIP List
1
2
3
Change Lock Code
Change Security Code
Restore Factory
Settings
5 Call Settings
1
2
Calling Options
Calling Card**
2 Call log
1
2
3
4
5
Dialed Calls
Received Calls
Missed Calls
Erase all Recent Calls
Call Timers
6 Lock Phone
Prevents outgoing calls
and access to all phone
functions.
7 Messages*
3 Phone Settings
1
2
3
Read Messages
Erase Messages
Message Alert Tone
1
2
3
4
5
6
7
8
9
Ringing Options
Ringing Volume
Ringing Tone
Keypad Tones
Lights
1-touch Dialing
Emergency 9 dialing
Language
8 Debit (TRACFONE only)†
1
Timetank Info
Checksum
9 Prepaid (if available)†
2
1
2
Check Balance
Add Money to
Account
Phone Number
10 Automatic Answer
11 Automatic Redial
12 Active Cover
13 Roam Beep
14 Welcome Note
3
4
Prepaid Card
Save Access Numbers
In Call Menu
Only available during calls.
Give MENU a short press
to access the options
MUTE and SEND DTMF.
*The Messages menu is available on the Nokia 282 NAMPS version
only. Access to the Messages feature depends on network and
subscription. **This menu is not available if Prepaid (Menu 9) is
activated. †Available on 282P only, depending on service provider.
29
Menu features
Accessing the menus
Using the “MENU then OK” method
1 Press MENU to enter the menu.
2 Press
3 Press OK to choose a menu.
If there are submenus: press
or
to scroll through menu items.
4
or
to scroll
through the submenu choices. Press OK to
enter a submenu.
5 The current setting is displayed. Press or
to scroll through the other choices. Press OK
to select one, or press END to exit the menus
without changing anything.
Some menus require you to enter your lock code
or security code.
To backstep a menu level at a time, press CLR. To
exit the Menu, press END or press and hold CLR.
Using the Shortcut method
The menus and submenus are numbered, so you
can access them by their number:
1 Press MENU to enter the menu, then press the
number(s) of the menu you want within 4
seconds. For example, for ‘Phone Settings’
press MENU 3, or for ‘Keypad Tones’ (within
‘Phone Settings’) press MENU 34.
The current setting (if applicable) is displayed.
The menu (or submenu) number is shown in
the top right-hand corner of the display.
2 Press or to scroll through other settings.
Press OK to select a setting or press CLR to
exit the menus without changing the settings.
Note: If you use the shortcut method, the display shows a
‘_’ (briefly) before the menu or submenu number in the
top right-hand corner of the display. Also, menu shortcuts
don’t work in Menu 4 because the security code is required.
30
Menu features
Also, if you use the shortcut method to access Menu 3 1,
there is a 5-second delay before the menu appears. To
bypass this delay, press MENU 3 1 OK OK.
Using the menu during a call
If you press MENU (short press) during a call, the
phone gives you the in-call menu (see “In-call
longer, you access the regular menu and can use
the menu features as you would normally.
Phone Book (Menu 1)
To access Menu 1, press MENU then OK.
Find Entry (Menu 1 1)
After you select this item, the
phone prompts you to enter a
name. Enter the first letter(s)
of the name then press OK
(or "or
to scroll through
the stored entries).
Alternatively, at the Name: prompt, just press
.
Save Entry (Menu 1 2)
With this menu item, the phone prompts you to
enter a name and number. At each prompt, enter
the information requested then press OK. When
the phone asks you to Save in Location, press
OK, or enter another location number then press
OK. The phone displays SAVED and the remaining
available memory.
information about saving entries.
Edit Entry (Menu 1 3)
1
Either:
Recall the entry from the Phone Book first,
then go to step 4 on the next page.
31
Menu features
Or:
Press MENU then OK. Then press
to EDIT ENTRY. Press OK.
to scroll
2 Press
to scroll to Find
Name or Find Loc., then
press OK.
3
Either:
If you selected Find
Name, enter the first letter of the name, then
press OK.
Or:
If you selected Find Loc., enter the location
number (1-75) where the entry is stored (or
press
or to scroll entries), then press OK.
4 The entry is displayed.
If this is the entry you want to edit, press OK;
if not, press or to scroll to the entry you
want to edit, then press OK.
5 Edit Name: (see note after Step 7) and the
name (if it exists) is displayed. If you want to
edit the name, use the CLR key to erase
characters, use
or
to move the cursor,
and enter new characters as required. Press OK.
6 Edit No.: (see note after Step 7) and the
number is displayed. If you want to edit the
number use the CLR key to erase digits, use
or
to move the cursor, and enter new
digits as required. Press OK.
7 At SAVE IN LOCATION?
(you can enter a different
location number if you
REPLACE?
want) press OK. If you did
not change the name, or
the name you have entered matches one
already stored, then REPLACE? will be
displayed; press OK to replace the contents
with the new (edited) name and number.
32
Menu features
Note: The prompts Edit Name: and Edit No.: are
omitted if the name or number occupies more than two
lines on the display.
Erase Entry (Menu 1 4)
Note: Be careful when erasing--it can’t be undone!
In this menu, if you choose
AB
ABC
Erase All, the phone asks you
to confirm. Press OK when
you see ARE YOU SURE?, or
press CLR to exit without
erasing.
One by One
Erase all
If you choose One by One, the phone displays
Erase name:. Either enter the first few letters of
the name then press , or just press
to scroll
through stored entries. When you see the entry
you want to erase, press OK, or press CLR if you
change your mind and do not want to erase.
Phone Book Status (Menu 1 5)
Use this menu item to see the
percentage of memory avail-
able in the Phone Book.
n% OF
MEMORY
AVAILABLE
VIP List (Menu 1 6)
Using this menu, you can make any Phone Book
entry a VIP number (by tagging it), show VIPs,
and remove VIP tags. For more details about this
Note: The name or number you want to tag or untag
must already be stored in the Phone Book.
If you choose Tag as VIP:
Press
or
to select Find
name or Find Loc. then press
OK.
At the Find name: prompt,
enter the first letter(s) of the name, or at the
Find loc: prompt, enter a one-digit or two-digit
33
Menu features
number. Press OK. If necessary, press
or
to
scroll to the entry you want, then press OK.
TAGGED will be displayed briefly, and you will
hear a demonstration ‘fanfare’ ringing tone.
If you choose Show VIPs:
Press
or
to scroll the Phone Book entries
currently tagged as VIP numbers.
If you choose Remove tag:
Press
or
to scroll to the entry you want to
untag, then press OK. TAG REMOVED will be
displayed briefly.
The tagged VIP numbers will be numbered ‘t1’ to
‘t3’ (index number). If you untag an entry,
remaining tagged entries may be renumbered.
If you attempt to enter a fourth VIP number, you
will see the message VIP LIST FULL. If this happens,
remove an existing tag before adding a new tag.
Call Log (Menu 2)
The phone automatically keeps lists of Dialed
Calls, Received Calls, and Missed Calls.
Note that Received Calls and Missed Calls lists are
available only in networks that support Calling Line
Identification.
About all of these lists
• The same number is not stored twice in each
list; e.g. if someone calls you twice, their
number appears only once in the Received
Calls list. Numbers remain in all of the lists
until you erase them with Menu 2 4.
• To dial any of the numbers in the lists, press
SEND while the number is displayed
• To store a number in a list to the Phone Book,
press OK when the number is displayed.
When SAVE IN LOCATION ‘n’ is displayed,
press OK again.
34
Menu features
Dialed Calls (Menu 2 1)
This list contains the last 15
numbers you called or
attempted to call. Each of the
phone numbers in the list has
a number 0L-14L which is shown in the top right
corner of the display; “L” stands for last dialed.
Received Calls (Menu 2 2)
This list contains the callers’ numbers for the last
15 calls you answered.
Each phone number in the list has a number
0A-14A which is shown in the top right corner of
the display; “A” stands for answered.
Note: This list is available only if the network supports this
feature, and the phone receives the callers’ numbers from
the network. Ask your service provider for more details.
Missed Calls (Menu 2 3)
This list contains the callers’ numbers and names
of the last 15 calls you missed.
Each phone number in the list
has a number 0U-14U which
is shown in the top right cor-
ner of the display; “U” stands
for unanswered.
Note: This list is available only if the network supports
Caller ID features. The phone receives the callers’ numbers
from the network. Ask your service provider for more
details.
Erase All Recent Calls (Menu 2 4)
When you select this menu
item, the phone asks you to
confirm your choice, because
the erase cannot be undone!
This erases the Dialed Calls,
Missed Calls, and Received Calls lists.
35
Menu features
Press OK to erase, or press CLR to exit without
erasing.
Call Timers (Menu 2 5)
Once you select this menu item, use to see the
duration of the last call, all calls, and the life
timer; and to reach the option to clear the last
call and all calls timers (life timer cannot be reset).
LAST CALL shows the dura-
tion of the last call in hours,
LAST
CALL
00:00:13
minutes, and seconds for the
phone number you are using.
If you are in a call, the phone
shows the duration of the call in progress.
ALL CALLS shows the total amount of time
spent on calls since the timer was last reset, for
the phone number you are using.
LIFE TIMER shows the total amount of time you
have spent on calls in hours and minutes. This
number cannot be reset. (You can also select Life
Timer by pressing the # key for about 4 seconds.)
CLEAR TIMERS resets all the timers to zero
(except the Life Timer). Note: CLEAR TIMERS
cannot be undone!
Note: The actual invoice for calls by your cellular service
provider may vary, depending upon network features,
rounding-off for billing, taxes and so on.
Phone Settings (Menu 3)
Ringing Options (Menu 3 1)
You can choose how you want the phone to
indicate that there is an incoming call when you
are using the My tones profile:
Ring - phone rings (ring only).
Increasing - ringing gets louder with each
ring.
36
Menu features
Ring+Vibra - phone rings and vibrates.
Beep+Vibra - phone beeps then vibrates.
Beep once - phone beeps once only (no ringing
tones).
Vibrate - phone vibrates only.
Note: This menu sets the ringing options only for the My
the ringing options of the other profiles.
Ringing Volume (Menu 3 2)
With this menu you choose the ringing volume
for the My tones profile. As you scroll through
each of the 5 volume levels, the phone rings so
you can hear each level.
Note: This menu sets the ringing volume only for the My
the ringing volumes of the other profiles.
Ringing Tone (Menu 3 3)
There are 12 different ringing tones to choose
from. As you scroll through each type, the phone
rings so you can hear each one.
Keypad Tones (Menu 3 4)
The phone makes sounds associated with each
key you press. With this menu, you choose
between three volume levels or you can turn the
keypad tones off for the My tones profile.
Note: This menu sets the keypad tones only for the My
the keypad tones of the other profiles.
Note: You can still send Touch Tones even when the
keypad tones are switched off.
Lights (Menu 3 5)
The keypad and phone display have lights to
make them easy to read. This menu allows you
to set the phone's lights On or Off.
37
Menu features
Note: With Keyguard active, lights are off. However, you
if you press the PWR key quickly, lights go on for 15
seconds.
Lights On
The keypad and display lights are on for 15 seconds
after the last keypress, or after you open the
cover.
If the phone is connected to an Advanced Handsfree
Car Kit, the keypad lights remain on permanently
when the cover is open, and the display lights
remain on 15 seconds after the last keypress.
Lights Off
The lights are off. However, they will flash to
indicate an incoming call if the cover is open
and you’ve chosen a quiet ringing option (such as
Beep once).
1-Touch Dialing (Menu 3 6)
With 1-Touch Dialing On, you can dial the
number stored in any of the locations 1 to 8,
by pressing and holding the key (location 1 is
recommended to be used for the Voice Mailbox
Number). For example, a long press of the 5 key
dials the number stored in location 5.
Note: 1-Touch Dialing does not operate when Keyguard
is On, or when a call is already established.
If you press and hold 9, the phone attempts to make a
call to the emergency number pre-programmed into
your phone if you have Emergency 9 Dialing (Menu 3 7)
set to On.
Emergency 9 Dialing (Menu 3 7)
To dial the emergency number programmed in
your phone by your dealer, press and hold the 9
key, if you have set Menu 3 7 to On.
38
Menu features
Language (Menu 3 8)
This menu lets you choose which language you
want the menus and messages to be displayed in:
English, French, Spanish, or Portuguese.
Phone Number (Menu 3 9)
Your phone can have two different telephone
numbers. This menu lets you choose which
telephone number to use.
Note: In order to have two different telephone numbers,
you must subscribe to them through your cellular
operator(s).
Note: If only one phone number is programmed into your
phone, you’ll only see that number in this menu.
The phone can’t use both numbers at the same time and
you can’t change the number during a call.
If your phone is set to your first number, you can only
receive calls via that number. You may be able to
forward calls from your second number to your first
number so you don’t miss any calls, if this service is
available from your cellular service provider. For more
information, please contact your cellular service
provider.
Automatic Answer (Menu 3 10)
Note: This feature applies only if the phone is in a
handsfree car kit, or a headset is connected.
With Automatic Answer set to On, the phone
automatically answers after 4 seconds.
Automatic Redial (Menu 3 11)
Sometimes the cellular network is busy, e.g. there
are too many calls for the network to handle, and
your call can’t go through. You get a SYSTEM
BUSY... message (and sometimes a tone such as a
fast busy signal). If Automatic Redial is set to On,
the phone automatically tries 3 more times to
connect the call. If the call connects, the phone
beeps to notify you.
39
Menu features
Active Cover (Menu 3 12)
With Active Cover set to On, when an incoming
call is alerting, you can answer the call by opening
the cover. To prolong the life of your phone, hold
it in one hand while opening the cover with the
other hand.
Note: You can end a call by closing the cover, regardless
of whether Active Cover is set to On or Off.
Roam Beep (Menu 3 13)
With Roam Beep set to On, you hear a beep if the
roaming status changes (e.g., if the phone roams
from the home system to a non-home system).
Note: This menu sets the roam beep option for the My
tones, Normal, Loud, and Car profiles. Roam Beep is set
to Off for the Silent and Quiet profiles.
Welcome Note (Menu 3 14)
You can create or change the Welcome Note which
is displayed each time you switch on the phone.
1 Press MENU then "until you see PHONE
SETTINGS. Press OK.
2 Press
to scroll to
WELCOME NOTE. Press
OK if you want to create
or change it.
will be displayed,
indicating that you can
enter characters from the
keypad (for details, refer
page 23).
3 Enter the Welcome Note (up to 30 characters).
To correct a mistake (or to erase an existing
note), press CLR (which erases the character
to the left of the cursor). Press
move the cursor left or right.
or "to
40
Menu features
4 When the note is complete, press OK.
The message SAVED will be displayed.
If there is already a Welcome Note, and you
don’t want one, save a blank screen. Your
phone number will then be displayed instead
when you switch on the phone.
Security Settings (Menu 4)
This menu lets you change your phone’s security
and lock codes, which are required for certain
functions. You can also reset the phone’s menus
to their factory settings.
Note: When you try to enter any of the Menu 4 submenus,
you need your security code. Menu shortcuts don’t work
because of this. The default security code is 12345.
When you enter any of the
Menu 4 submenus, the phone
asks for your 5-digit security
code. Enter it and press OK.
Change Lock Code (Menu 4 1)
Note: The phone’s default lock code is 1234.
The lock code is required when you want to lock
your phone. See “Lock Phone (Menu 6)” on
When you enter this menu,
the phone prompts you to
enter a new 4-digit lock code.
Enter it and press OK.
When the phone asks you to
verify your new lock code, type in the new lock
code again and press OK.
Change Security Code (Menu 4 2)
The security code allows access to the lock code
and certain submenus, so it should be kept in a
secret and safe place, separate from the phone.
41
Menu features
When you enter this menu,
the phone prompts you to
enter a new 5-digit security
code. Enter it and press OK.
When the phone asks you to
verify your new security code, key it in again and
press OK.
Restore Factory Settings (Menu 4 3)
This function resets the phone’s menus to their
factory settings.
Note: The lock code and security code are not changed
when you reset the menu settings.
Call Settings (Menu 5)
This menu lets you set up calling restrictions and
store calling card information in your phone.
Calling Options (Menu 5 1)
This menu lets you set your phone so that it can
only make the types of calls you specify, or only
in certain types of networks.
Note: When calls are restricted, calls may be possible to
the emergency number programmed into your phone
(e.g., 911 or another official emergency number) including
calls by Emergency 9 Dialing.
Carrier Selection (Menu 5 1 1)
Your phone uses a carrier network (also called a
cellular system) to make and receive calls.
Generally you sign up for service with a particular
carrier (your cellular service provider). This is
called your “Home system” and usually you want
the phone to use it.
But there may be times when you can’t or don’t
use your Home system (for example when you
travel). Then, there’s usually more than one
network your phone can work in. But which one
42
Menu features
should it work in? The point of the Carrier Selec-
tion menu is to help your phone make the best
choice for you.
A simple fact to know: All cellular systems are
either type “A” or “B”. So your “Home system” is
either an “A” or “B” system. To find out your
system type, ask your cellular service provider.
You need your security code
to enter this menu. Once you
AB
Non-pref.
Any
Home only
have entered the menu, you
can choose the option you
want (described below). Press
to move the pointer to the option you want.
Press OK to select it.
Preferred - Your dealer can program a list of
“preferred” networks into your phone. If your
dealer has done this, when you choose Preferred
your phone looks first for your home system, then
a network in the preferred list, then a network of
the same “type” (A or B) as your home system,
then a network of the opposite “type” as your
home system.
If your dealer has not programmed this list into
your phone, use the Preferred option. The phone
will look first for your home system, then a net-
work of the same “type” as your home system.
Non-Preferred - Your phone will choose a
network that is of a different “type” than your
Home system.
Any - The phone first looks for your home
system, then a network of the same “type” as
your home system, then a network of the
opposite “type” as your home system.
Home Only - The phone only looks for service
on the Home system. It won’t choose any other
network, so if you’re out of your Home system,
you won’t have service (NO SERVICE).
43
Menu features
The following table shows which system the
phone attempts to use, and the phone’s display
indicators, depending on the menu item selected,
and whether or not your dealer has programmed
the phone with a Preferred list of systems.
System selection and display indicators
Does
Order in
which phone
searches the
systems
Displayed Displayed
Menu
item
phone
have
system
name or
message
System
Indicator
(A or B)
selected Preferred
list?
icon
Pre-
Yes
1) Home
system
Solid Blank/
Blank
ferred
home sys-
tem name
2) Preferred
Flash- PRE-
list, in prior- ing
ity or signal
strength
FERRED/
Preferred
system
name
order
3) Home type Blank ROAMING
4) Non-home Blank NON-PREF.
type
No
1) Home
system
Solid Blank/
Home
home sys- letter
tem name
(A or B)
2) Home type Flash- ROAMING
ing
Non-
pre-
n/a
n/a
Non-home
type
Blank NON-PREF. Non-
home
ferred
letter
(A or B)
Any
1) Home
system
Solid Blank/
home sys-
tem name
AB
2) Home type Flash- ROAMING
ing
3) Non-home Blank NON-PREF.
type
Home
Only
n/a
Home system Solid Blank or
home sys-
Blank
tem name
44
Menu features
Allowed Calls (Menu 5 1 2)
You need your security code to enter this menu.
Once you have entered the menu, you can choose
the option you want (described below). Press
to move the pointer to the option you want.
Press OK to select it.
Allow all - There are no
restrictions on outgoing calls.
Nat’l only - You can only
make calls within your own
country; you cannot make
international calls.
Local only - You can only make local calls, or calls
to toll-free numbers beginning with 1800, 1888,
or 1877. You cannot make national calls (prefixed
with 1) or international calls (prefixed with 011).
Mem. only - You can only make outgoing calls to
numbers stored in Phone Book locations 10-14.
Note: You cannot store any numbers in the phone
directory when Mem. only is selected.
Incoming - You can only receive incoming calls;
your phone will not allow outgoing calls.
Calling Card (Menu 5 2)
Note: This option is not available if Prepaid (Menu 9) is
activated.
With this menu you can store calling card infor-
mation for up to 2 cards in your phone. Then you
can make calling card calls without having to
enter the calling card information each time.
To make a calling card call, see “Calling card
Card information may be found on your calling
card. If you need further information about
specific dialing sequences, contact your calling
card company.
45
Menu features
To enter or change calling card information
1 Press MENU then "until you see CALL
SETTINGS. Press OK.
2 You’ll see CALLING CARD
and the currently selected
card. Press OK to change
it.
3 Use
to move the
pointer to None, Card A or Card B, then press
OK. When the phone asks for your security
code, key it in and press OK.
If you select None, the phone briefly displays
NO CARD SELECTED, and no card is selected.
Note: If you’ve already stored card information, and
then later select None, the active card is deselected.
However, stored card information is left intact.
If you select Card A or Card B, and you’ve
never entered information for the card before,
skip to Step 5.
4 If you’ve already entered
information for a Card,
you then have the option
to Select, Edit, or Erase
the card. Use
to move
the pointer to the option you want, and press
OK.
Select chooses this card as the one to use.
The phone briefly displays SELECTED.
Edit allows you to change already-entered
information, described in Steps 5 and 6 below.
Erase erases the stored information. To verify
that you want to do this, press OK at the
ERASE? prompt. Press CLR if you don’t want
to erase the stored information.
46
Menu features
5 If phone prompts you to
SELECT DIALING
SEQUENCE, press OK.
Press
to scroll through
the 4 dialing sequence
options, and press OK to choose one:
Access No. + Phone No. + Card No.
Use for cards that require you to enter a
1-800 or 1-888 access number first, then a
phone number after you hear a tone, then a
card number after you hear another tone.
Access No. + Card No. + Phone No.
Use for cards that require you to enter a
1-800 or 1-888 access number first, then your
card number after you hear a tone, then the
phone number after you hear another tone.
10xxx + Phone No. + Card No.
Use for cards that require you to enter an access
number (beginning with 10 then other digits),
followed by the phone number after you hear a
tone, then a card number after you hear a tone.
0 + Phone No. + Card No.
Use for cards that require you to enter 0, then
the phone number after you hear a tone, then
a card number after you hear a tone.
6 The phone then prompts you for other card
information, which may include: SELECT
PREFIX, Card No:, and Card name:. At each
of these prompts, press OK.
For SELECT PREFIX, use
or
to move the
pointer to the prefix that your calling card
requires you to enter before the phone number.
Then press OK.
For Access No:, Card No:, and Card name:,
enter the information then press OK.
The phone briefly displays CARD READY FOR
USE, and uses the card for which you’ve just
entered details.
47
Menu features
Useful Information about Calling Cards
Remember, to use the automated method of
making calling card calls, you must have entered
all the necessary card details and selected the
card (using this menu). If only the details for one
card are entered, there is no need to use the
Select feature. But, if you then add the details of
another card, the second card will automatically
become the card in use. Only one card can be
active at a time.
You may enter a card name for each card, but
this is optional. This name is only used for card
identification on the phone display, and has no
effect on the sending sequence. ‘Card A’ and
‘Card B’ will be replaced by the names you enter.
Lock Phone (Menu 6)
When you lock your phone, you cannot make
calls, except to the number stored in Phone Book
location 75 and to the emergency number pro-
grammed into your phone. You cannot access the
phone’s Phone Book or menu. You can receive
incoming calls as usual.
LOCKED remains on the display to remind you
that the phone is locked. To call the number
stored in Phone Book location 75 or to the
emergency number programmed into your phone,
dial the number then press SEND.
To unlock the phone, press MENU and the phone
will prompt you for the lock code. Key it in and
press OK.
Messages (Menu 7)
Note: This menu is available on the Nokia 282 NAMPS
version only. The messages feature depends on network
and subscription.
To access Menu 7, press MENU, then" until you
see MESSAGES. Press OK.
48
Menu features
Read Messages (Menu 7 1)
The phone automatically stores the last 20 short
text messages you have received in the Read
Messages list. (You can receive text messages if
the network supports this service, and if you
subscribe to this service - refer to your service
provider for more information). This menu lets
you scroll through and read the stored messages.
Stored messages remain in the phone's memory
when the phone is switched off. The same mes-
sage isn’t stored twice in the list.
If you want to erase a message, use Menu 7 2.
1 Press MENU, then" until
you see MESSAGES. Press
OK.
2 Press" to scroll to READ
MESSAGES. Press OK. The
display will show MESSAGE(S) RECEIVED if
there are new ones, or it will show the first
(read) message in the list if there are no new
ones.
3 Use
or
to scroll to
the message you want to
read; e.g., NEW: CALL
HOME.
NEW denotes an unread
message, whereas OLD would denote a
previously read message.
Each message has a number which shows in
the top right corner of the display. The newest
message is 1. After you have read the last
message, the phone displays ***END***.
Erase Messages (Menu 7 2)
This menu lets you erase any of the stored messages.
Note: This menu erases messages you select, and cannot
be undone!
49
Menu features
Once you enter this menu, use
or
to scroll
to the message you want to erase. Press OK.
When ERASE? is displayed, press OK again.
The phone will briefly display
ERASED. The list of stored
messages is then re-ordered
and the next message is
displayed. If the list is empty
(when you try to erase messages), NO MESSAGES
is displayed.
Message Alert Tone (Menu 7 3)
This menu lets you set the type of alert tone you
hear when you receive a text or voice message.
Note: This menu sets the message alert tone only for the
My tones profile. See “Selecting the Profile” on page 18
for the message alert tone of the other profiles.
Short - causes the phone to beep 3 times when
you receive a text or voice message.
Long - causes the phone to beep for 15 minutes
when you receive a voice or text message. To stop
the beeping, press CLR.
Vibra Only - causes the phone to vibrate when
you receive a voice or text message.
Off - means the phone won’t beep (or vibrate)
when you receive messages.
Debit (Menu 8, 282P only)
If you activate your phone as prepaid through
TRACFONE prepaid service, your phone will have
an additional menu item called DEBIT.
If you activate the prepaid option, your phone
functions the same way as it did before, with
some additional features. These features are listed
and explained in this section.
50
Menu features
To access the Debit menu, press the MENU key,
then press
Press or
twice to access the Debit menu.
to scroll through the menu options.
TIMETANK INFO shows you the amount of
prepaid talk time you have left in your phone.
At the TIMETANK INFO screen, press the OK key,
and your phone displays the number of units
remaining (indicated as U) as well as the date by
which you should redeem another prepaid cellular
card.
CHECKSUM is a customer service only menu
item, used for debit verification.
Adding Units to Your Phone
Each time you want to add units to your phone,
you must purchase another TRACFONE Airtime
Card and then contact TRACFONE prepaid service.
Important note: You must add units to your phone
before the airtime card due date, or your service will be
interrupted and your phone number may be changed.
Switching On/Off
When you first turn your phone on, REMEMBER
AIRTIME CARD DUE and a date appear.
This reminds you that this is the date you must
purchase additional airtime in order to retain
your current phone number and cellular service.
The date automatically updates once you add
units to your phone.
UNITS and the number of units currently in your
phone appear after another few second pause.
This number automatically updates while you are
in a call, at the end of a call, and once you add
units to your phone.
Note: When your phone displays the REMEMBER
AIRTIME message, you can press any key to skip the
subsequent CARD DUE and UNITS messages and ready
the phone for immediate use.
51
Menu features
Making a Call
For complete information on making a call, refer
Once you have placed a call your phone displays
the charge rate of units per minute, as well as a
timer which tracks the duration of the call
expressed in minutes and seconds.
Your phone has a grace period that begins when
you make a call and extends for an amount of
time set by TRACFONE prepaid service. The grace
period exists only on outgoing calls.
During the grace period you are not charged for
the call. Once the grace period expires, the
charge rate of units per minute is replaced by
only the number of units remaining in your
phone (indicated as U).
When there are only ten minutes of talk time left
in your phone, your phone sounds a beep that
continues once a minute. If you hang up before
the amount of time in your phone expires, your
phone continues to beep once a minute during
the next call.
Important Note: If you try to make a call and there are
no units left in your phone, your phone beeps and
displays the message TIMETANK EMPTY.
Ending a Call
For complete information on ending a call, refer
Once you press END, your phone displays the
remaining units (indicated as U) and the duration
of the call expressed in minutes and seconds.
Note: Due to rounding, there may be a difference
between the call time length shown on the screen after
you terminate a call and the call time length shown
under the menu, Call Timers.
52
Menu features
Answering a Call
For complete information on answering a call,
Note: Call Waiting may not be available if your phone is
in prepaid mode.
When you answer a call your phone displays the
charge rate of units per minute as well as a timer
which tracks the duration of the call expressed in
minutes and seconds.
After three seconds the charge rate of units per
minute is replaced by only the number of units
remaining in your phone (indicated as U).
When there are only ten minutes of talk time left
in your phone, your phone sounds a beep that
continues once a minute. If you hang up before
the amount of time in your phone expires, your
phone continues to beep once a minute during
the next call.
Note: If there are no units left in your phone, your phone
will not ring for incoming calls.
Making a Calling Card Call
For complete information on making a calling
Note: While you are in a call, your phone displays the
number of units being used, as well as a timer which
tracks the duration of the call.
PIN Calls
For complete information on making a call with
Once the call is connected, your phone displays
the number of units being used, as well as a timer
which tracks the duration of the call.
53
Menu features
Emergency 9 Dialing
For complete information on 9 key emergency
When you make an emergency call, the amount
of units being used and the duration of the call
are not tracked by your phone.
Important Note: This means you are not charged for 911
calls. Even when there are no units in your phone, you
are able to make 911 calls.
Prepaid (Menu 9, 282P only)
Your service provider may offer prepaid service
compatible with your new Nokia phone. Contact
your service provider for details.
If you activate your phone as prepaid through
your service provider and then activate the
Prepaid menu, your phone will have an additional
menu item called PREPAID.
Your phone functions the same way as it did
before, with some additional features. These fea-
tures are listed and explained in this section.
To activate prepaid feature available through
your service provider, enter the following
sequence: *#7766#.
To deactivate the prepaid feature available
through your service provider, enter the following
sequence: *#77633#.
To access the Prepaid menu, press the MENU key,
then press
menu. Press
options.
to go immediately to the Prepaid
or
to scroll through the menu
Adding Money to Your Prepaid Account
ADD $ TO ACCOUNT allows you to add money
to your prepaid account.
54
Menu features
Saving Your Access Number
Before you can add money to your account, you
must save the correct access number into your
phone. Contact your service provider for the
access number.
1 Press MENU 9 4.
2 At SAVE ACCESS NUMBERS, press OK.
3 Press
once.
4 At ENTER REPLENISH NUMBER, press OK.
5 At Repl. No:, enter the replenish number
given to you by your service provider.
6 Press OK.
Adding Money to Your Account
1 Press MENU 9 2.
2 At Card No:, enter your prepaid card number,
then press OK.
3 When your phone displays ADD $ TO
ACCOUNT, press OK.
4 When you hear the tone (and your phone
displays WAIT FOR TONE, THEN PRESS OK),
press OK.
Checking Your Prepaid Balance
CHECK BALANCE allows you, free of charge, to
check your prepaid balance.
Contact your service provider for the toll-free
balance checking access number, which you must
save in your phone. If you try to check your
balance before the correct number is saved in
your phone, the message NO ACCESS NUMBER
DEFINED displays.
Saving the Balance Checking Number
1 Press MENU 9 4.
55
Menu features
2 At SAVE ACCESS NUMBERS, press OK.
3 At ENTER BALANCE NUMBER, press OK.
4 At Bal No:, enter the balance number given to
you by your service provider.
5 Press OK.
Checking Your Prepaid Balance
Press MENU 9 1.
The balance checking number you saved is auto-
matically dialed.
Prepaid Calling Card
Note: This feature may not be available in all areas.
See your service provider for more information.
PREPAID CARD allows you to save a prepaid card
number into your phone. Contact your service
provider for your prepaid card number.
Note: You can only have one prepaid card number saved
in your phone at a time.
Note: If you activate your phone as prepaid through
your service provider, the Calling Card menu option is
not available.
Saving Your Prepaid Card Number
1 Press MENU 9 3.
2 Scroll to Card and press OK.
3 At Prefix No: enter the prefix number given
to you by your service provider, then press OK.
4 At Card No: enter the card number given to
you by your service provider, then press OK.
5 At Card name: enter the card name of your
choice, then press OK.
Activating Your Prepaid Card Number
1 Press MENU 9 3.
2 Scroll to your prepaid card and press OK.
56
Menu features
3 At Select press OK.
You can also edit or erase your prepaid card
number.
Making a Call
For complete information on making a call, see
1 Enter the number you want to call, then press
and hold SEND until you hear a tone.
2 At the tone, press OK and the card number you
saved is automatically sent to the network.
Ending a Call
For complete information on ending a call, see
• Press END.
PIN Calls
For complete information on making a call with
Emergency 9 Dialing
For complete information on Emergency 9 Dialing,
In-call menu
This is available only when
AB
you’re in a call. To access it,
press MENU quickly. (A
Mute
Send DTMF
longer press of the MENU
key gives you the regular
menu.)
The in-call menu works just like a regular menu -
press or to move the pointer then press OK
to select an option. After you make a choice, the
phone automatically exits the in-call menu.
57
Menu features
Mute - This mutes the phone during a conversa-
tion. The phone displays MUTED. To unmute the
phone, select the Mute option again.
Send DTMF - To send DTMF (Touch Tone) strings
during a call, first recall the stored string from
the Phone Book. Access the in-call menu with a
short press of MENU. Move the pointer to Send
DTMF and press OK. The phone sends the DTMF
(Touch Tone) string. See “Sending touch tones” on
Note: When you’re in the in-call menu, pressing any
key (0-9, *, #, CLR or END) exits the in-call menu.
The phone displays the digit pressed instead.
While the phone is alerting you of an incoming call (and
there are no other calls active or held), the in-call menu
is not available until you answer the call. Similarly, when
you press SEND to initiate a call, until the call is
connected, there is no in-call menu.
58
Menu features
8. Data and Touch Tones
Data Mode
Data Mode can be used when your phone is con-
nected, via a suitable data card and modem, to a
laptop or personal computer. You may then use
your computer to make and receive calls, and to
send and receive data messages such as emails.
Follow these steps before using Data Mode:
1 Ensure your phone is switched on, and that
the battery has enough charge for the
duration of your data calls.
2 Ensure that you are receiving a strong signal
(see signal strength indicator on the display).
3 Ensure that your computer is switched on, and
is fitted with a data card.
4 Connect the data cable to the data card, and
to your phone.
To select Data Mode
• Connect the data cable to your phone (DATA
CARD CONNECTED displays). When in a call,
with the data cable connected, the phone
displays DATA CALL.
In a data call, the keys on the phone don’t work
except for END; when not in a call, all keys work.
Also, the microphone and earpiece don’t work in
a data call.
Important! When you are in Data Mode, do not switch
off the phone. Do not move the phone, or use it in a
moving vehicle (data will be lost if you move from one
cell to another).
To de-select Data Mode
• Disconnect the data cable (DATA CARD
REMOVED displays).
59
Data and Touch Tones
To operate your modem and data card
• Refer to the documentation supplied with
these items.
Sending touch tones
Your phone is a ‘Touch Tone’ phone. Touch Tones
are the sounds your phone makes when you press
the keys. Touch Tones can be used for many auto-
mated phone services such as checking your bank
balance and using voice mailbox options.
Your phone refers to Touch Tones as ‘DTMF’
(Dual Tone Multi Frequency).
Manually sending touch tones
Pressing the keys during a call sends Touch Tones.
During a call, just enter the digits to be sent as
Touch tones.
Automatically sending touch tones
For automatic sending of Touch Tones, you can
store the Touch Tone string within the same
Phone Book location as the access phone number.
Store a pause (p) or wait (w) character between
the phone number and the Touch Tone string.
page 25 for details on storing pause and wait
characters.
The following is an example of a number you
could store in your phone:
This number contains a phone number
(18005551212), a wait character, an access
number (‘1234’), a wait character, and a password
(‘3434’) - 18005551212w1234w3434
When you recall this number from the Phone
Book and press SEND, the phone:
• Dials 18005551212 (the phone number), then:
60
Data and Touch Tones
• ‘Waits’ for you to press SEND again. When
you do, the phone sends the numbers 1234.
• ‘Waits’ for you to press SEND again, then
sends the numbers 3434.
The following example shows storing ‘pause’
characters as well as ‘wait’ characters (Note that
a ‘wait’ character must still be included, as
shown, to separate the phone number from the
following digits):
18005551212w1234p3434
When you recall this number from the Phone
Book and press SEND, the phone:
• Dials 18005551212 (the phone number), then
• ‘Waits’ for you to press SEND again. When
you do, the phone sends the numbers 1234.
It then:
• Pauses for 2.5 seconds, then sends the
numbers 3434.
Note: If the keypad tones have been set to Off, the Touch
Tones will still be sent, but you will not hear them.
Pressing MENU SEND sends a displayed number
as a Touch Tone.
To end the call, press END after the phone sends
the Touch Tones and has returned to the normal
call mode.
Using the Flash function
Your cellular system may offer a flash function
service. This system service lets you accept or
make a second call when you already have a call
in progress (e.g. set up a conference call), or send
other information to the network, such as credit
card numbers.
61
Data and Touch Tones
Pressing SEND sends a displayed number to the
network as a flash, unless it is preceded by a ‘p’
or ‘w’. (In these cases it is sent as a Touch Tone.)
After the phone number has been entered, you
can add extra information which is for ‘flash’
sending to the network.
Contact your service provider for further details.
62
Data and Touch Tones
9. Network Services
Availability of network services
The network services available depend on the
model of your phone, the cellular system (AMPS
or NAMPS) on which it operates, and the services
offered by your cellular service provider.
To be able to use any of the network services, you
need to subscribe to the particular service. The
service may not be available in all cellular service
provider networks. Please contact your local
cellular service provider for further information.
Some services which may be available are listed
below and described briefly in this section:
• Calling Line Identification
• Call Waiting
• Message Waiting
• Voicemail
• Digital Messaging Service, which includes
Short Message Service and Callback Number
Service.
Calling Line Identification
When someone calls you, the
phone can display the caller’s
JOHN
phone number or name (or a
CALLING
text message), with CALLING
flashing.
If the presentation of the caller’s identity is
restricted by the network, or is withheld by the
caller, CALL - CALLER ID BLOCKED or CALL - ID
NOT AVAILABLE may be displayed instead.
The caller’s name will be displayed if it is sent by
the network, or if the number sent matches the
number and name stored in your Phone Book.
63
Network Services
Note: If the last seven digits of an incoming caller’s
number match the last seven digits of a number stored
in the Phone Book, the phone displays the stored
number/name even if the area code or other dialing
prefix is different.
The number is then stored in either the Received
Calls list or the Missed Calls list, depending on
whether you answer the call or not.
Call Waiting
Call Waiting lets you know you have an incoming
call while you already have a call in progress.
When this happens, Calling
Line Identification works as
JOHN
in a normal call; either the
CALLING
caller’s name is displayed or
not, depending on the network.
To answer the waiting call:
1 When you get an incoming call alert (e.g., if
you hear a beep, or see the caller’s number or
name, with CALLING flashing), press SEND.
This answers the second call and puts the first
call on hold.
2 To swap between the two calls, press SEND.
To end the both calls, press END.
If you don’t answer the incoming call, after
approximately 20 seconds the call alert indicators
will stop and the caller’s number (if available)
will be added to the Missed Calls list.
If you have a headset connected, press SEND to
answer an incoming call or to swap calls. If you
press the headset button when a second call
comes in, you’ll end the first call.
To ignore the waiting call without answering it:
• Press CLR.
64
Network Services
Message Waiting (Voicemail)
Message Waiting lets you know you have
unheard voice mail messages in your voice mail-
box. The method of notification varies from one
network to another.
If you receive voicemail:
• the voicemail indicator
lights,
• NEW VOICE MESSAGE or ‘n’ NEW VOICE
MESSAGES may be displayed, indicating the
number (n) of unread messages,
• the index number may show the number of
unread messages, and
• you may hear a message-received tone.
To access your Voice Messages you can:
• Press SEND or OK when NEW VOICE
MESSAGE or ‘n’ NEW VOICE MESSAGES is
displayed (if you’ve stored your voice mailbox
access number in location 1), or
• Call your voicemail access number when it is
convenient for you to do so.
Note: To be able to quick dial your voice mailbox with
the 1key you need to save your voice mailbox access
number in Phonebook location 1 and 1-Touch Dialing
menu must be set to on. See “Saving entries” on page 23
Voicemail systems vary by cellular system; contact your
service provider for details on how to use your particular
voicemail system.
Digital Message Service (Nokia 282 NAMPS only)
When you cannot answer calls the caller or
switchboard can send you a short message using
the Digital Message Service (DMS). The message
can be a short text message, a callback number,
or a note to say you have voicemail.
65
Network Services
When you receive a message:
• the text message indicator
lights.
• the note MESSAGE RECEIVED or ‘n’ MES-
SAGES RECEIVED or a callback number may
be displayed.
• the message alert tone may be heard (to stop
the long tone, press any key except PWR or
or ).
• the message is stored automatically in the
Messages list.
To read a message when MESSAGE RECEIVED
or ‘n’ MESSAGES RECEIVED is displayed:
• Press OK, or
or
.
To scroll other stored messages, press
or
. When at the bottom of the list, press to
go up the list.
To erase a displayed message:
1 Press CLR.
2 When ERASE? is displayed, press OK.
To exit the Messages list:
1 Press CLR twice.
You can also read and erase messages, and set
the Message Alert Tone, using the Messages
menu. For details, see “Messages (Menu 7)” on
page 48 (this menu item is available on the Nokia
282 NAMPS version only).
If the
indicator blinks the Messages List is
full of read or unread messages. If 20 messages
are already stored, when a new message arrives
the oldest is erased automatically.
If the same message is received twice, the most
recent message is stored, but the old message is
erased from the Messages List.
66
Network Services
Short Message Service (SMS)
Callers can send you short pre-defined messages,
such as CALL HOME. Contact your local service
provider for information.
Callback Number Service
Caller’s can send you their callback numbers.
Contact your local service provider for information.
Note: If the number received matches a number and
name stored in the Phone Book the name will be
displayed instead.
To call the number received:
• With the number (and message) displayed,
press SEND.
Some networks use this feature to send voicemail
notification.
67
Network Services
10. Accessories
An extensive range of accessories is available for
your phone. You can select the accessories that
best suit your specific communication needs.
For availability, please check with your local
dealer.
A few practical rules for accessory operation:
• Keep the accessories out of small children's
reach.
• When you disconnect the power cord of any
accessory, grasp and pull the plug, not the
cord.
• Check regularly that all wireless phone equip-
ment in your vehicle is mounted and operat-
ing properly.
• Installation of complex car equipment must
be completed by qualified personnel only.
WARNING!
Use only batteries, chargers and accessories
approved by the phone manufacturer for use
with this particular phone model. The use of
any other types may invalidate any approval or
warranty applying to the phone, and may be
dangerous.
68
Accessories
The chargers and some of the other accessories
available for your phone are described in this
section. Please refer to your dealer for further
information. Also, refer to any accessory options
manual that may have been included in your
sales package for the entire range of Original
Nokia accessories.
Note: When a charger is not in use, disconnect it from
the power source. Do not leave the battery connected to
a charger for longer than a week, since overcharging
may shorten its life. If left unused, a fully charged
battery will discharge itself over time.
BLP-2 Extended Li-Ion Battery
The Extended (900mAh)
battery, useful as a spare or
as a replacement, can be
charged separately in the
Compact Desktop Charging
Stand, or when fitted in the
phone (from any of the
charging options).
Note: When placing the battery in the Charging Stand or
phone, the contacts on the battery must be aligned with
the contacts on the Stand or phone.
For charging times and other battery information, see
ACP-7U Standard Travel Charger
The Standard Travel Charger
is an economical and dura-
ble charging option.
Plug the charger into a wall
outlet, and plug the connec-
tor (on the charger lead)
into the bottom of your
phone. Check the charging status on the phone
display.
69
Accessories
For charging times and other battery information,
Note: If the battery is completely discharged, you cannot
use the phone until it has enough charge to operate.
The Standard Travel Charger is available for
different voltage levels.
ACP-9U Rapid Travel Charger
The extremely light, function-
ally designed Rapid Travel
Charger charges your phone
battery quickly.
Plug the charger into a wall
outlet and plug the connector
(on the charger lead) into the
bottom of your phone. Check
the charging status on the
phone display. Calls can be
made while charging.
For charging times and other battery information,
Operating within a voltage range of 100V-240V
AC, 50Hz-60Hz*, the Rapid Travel Charger is
practically voltage-independent in normal office
and household use. The Rapid Travel Charger can
be used with the CGL-2 Compact Desktop
Charging Stand.
(*Voltage range and operating frequency depend
on model and country.)
LCH-9 Rapid Cigarette Lighter Charger
The Rapid Cigarette
Lighter Charger allows
you to charge your
phone quickly, from
your vehicle battery,
when you travel.
70
Accessories
This small charger's functional design fits well
with most car cigarette lighters.
Charging Times are the same as for the Rapid
Travel Charger ACP-9U. For charging times and
other battery information, see “Battery Informa-
tion” on page 7. Calls can be made while
charging.
A green light indicates that the Rapid Cigarette
Lighter Charger is ready to charge. Check the
charging status on the phone display. The input
voltage is 12 or 24 V DC, negative grounding.
The Rapid Cigarette Lighter Charger can be used
with other accessories available for your phone.
Avoid prolonged charging with the Rapid Cig-
arette Lighter Charger when the car engine is not
running. This may cause the battery of your car
to drain.
Note: In some cars the cigarette lighter socket is not
provided with power when the ignition is switched off.
Verify that the green LED light is lit.
CGL-2 Compact Desktop Charging Stand
The Compact Desktop
Charging Stand holds
both your phone and a
spare battery and charges
both. The phone battery is
charged first, then the
spare battery.
Plug the charger into a wall outlet and plug the
connector (on the charger lead) into the back of
the Compact Desktop Charging Stand. Place your
phone and/or a spare battery in the stand to
begin charging.
Note: When placing the battery in the Charging Stand
(or phone), the contacts on the battery must be aligned
with the contacts on the Stand (or phone).
71
Accessories
The charging status of the phone battery is
shown on the phone display. The charging status
of the spare battery is shown on the LED indicator
on the stand - it will be red when charging, and
green when charged.
For best performance, it is recommended that
you use the Compact Desktop Charging Stand
with the Rapid Travel Charger ACP-9U.
BCP-5 Belt Holster
The Belt Holster lets you eas-
ily wear your phone. Tilt the
phone and place it into the
bottom of the holster, then
press the top in firmly until
you hear a click. To make or
answer a call, remove the
belt holster/phone assembly
from your belt, and use the
phone normally.
When you need to remove the phone from the
holster, gently press the release tab on top of the
Belt Holster away from the phone and tilt the
phone forward.
72
Accessories
11. Reference Information
Important Safety Information
Traffic Safety
Do not use a hand-held telephone while driving a
vehicle. If using a hand-held phone park the vehicle
before conversing.
Always secure the phone in its holder; do not place the
phone on the passenger seat or where it can break
loose in a collision or sudden stop.
The use of an alert device to operate a vehicle’s lights
or horn on public roads is not permitted.
Remember, road safety always comes first!
Operating Environment
Remember to follow any special regulations in force in
any area and always switch off your phone whenever it
is forbidden to use it, or when it may cause interference
or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your ear with
the antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain elec-
tronic equipment may not be shielded against the RF
signals from your wireless phone.
Pacemakers
Pacemaker manufacturers recommend that a minimum
separation of 6 inches (20 cm.) be maintained between
a handheld wireless phone and a pacemaker to avoid
potential interference with the pacemaker. These rec-
ommendations are consistent with the independent
research by and recommendations of Wireless Technology
Research. Persons with pacemakers:
73
Reference Information
•
Should always keep the phone more than 6 inches
(20 cm) from their pacemaker when the phone is
switched on;
•
•
Should not carry the phone in a breast pocket;
Should use the ear opposite the pacemaker to
minimize the potential for interference.
•
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
want to consult your service provider.
Other Medical Devices
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a
physician or the manufacturer of the medical device to
determine if they are adequately shielded from external
RF energy or if you have any questions. Switch off your
phone in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could
be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inade-
quately shielded electronic systems in motor vehicles
(e.g. electronic fuel injection systems, electronic anti-
skid (anti-lock) braking systems, electronic speed
control systems, air bag systems). Check with the
manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer of
any equipment that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices so require.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a potentially
explosive atmosphere and obey all signs and instruc-
tions. Sparks in such areas could cause an explosion or
fire resulting in bodily injury or even death.
74
Reference Information
Users are advised to switch off the phone while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck on
boats; chemical transfer or storage facilities; vehicles using
liquefied petroleum gas (such as propane or butane); areas
where the air contains chemicals or particles, such as grain,
dust or metal powders; and any other area where you
would normally be advised to turn off your vehicle engine.
Vehicles
Only qualified personnel should service the phone, or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty which may apply to the unit.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as the
phone, its parts or accessories.
For vehicles equipped with an air bag, remember that an
air bag inflates with great force. Do not place objects,
including both installed or portable wireless equipment,
in the area over the air bag or in the air bag deployment
area. If in-vehicle wireless equipment is improperly in-
stalled and the air bag inflates, serious injury could result.
Switch off your phone before boarding an aircraft.
The use of wireless telephones in an aircraft may be
dangerous to the operation of the aircraft, may disrupt
the wireless telephone network and may be illegal.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
Emergency Calls
IMPORTANT!
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user- programmed functions which cannot guarantee
75
Reference Information
connection in all conditions. Therefore, you should
never rely solely upon any wireless phone for essential
communications (e.g. medical emergencies).
Remember, to make or receive any calls, the phone
must be switched on and in a service area with ade-
quate signal strength. Emergency calls may not be
possible on all wireless phone networks or when certain
network services and/or phone features are in use.
Check with local service providers.
Making an Emergency Call
1 If the phone is not on, switch it on by giving
the PWR key a long press.
2 Give CLR a long press or press END to clear
the display
3 Enter the emergency number for your present
location (e.g. 911 or other official emergency
number). Emergency numbers vary by location.
4 Press SEND.
If certain features are in use (Keyguard, restricted calls,
etc.), you may first need to turn those features off
before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your wireless phone may be the only
means of communication at the scene of an accident.
Do not cut off the call until given permission to do so.
Radio Frequency (RF) Signals
THIS MODEL PHONE MEETS THE GOVERNMENT'S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radiofrequency (RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy
for the general population. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation
76
Reference Information
of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all per-
sons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6W/kg.* Tests for SAR are conducted using standard
operating positions specified by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is deter-
mined at the highest certified power level, the actual
SAR level of the phone while operating can be well
below the maximum value. This is because the phone is
designed to operate at multiple power levels so as to
use only the power required to reach the network. In
general, the closer you are to a wireless base station
antenna, the lower the power output.
Before a phone model is available for sale to the public,
it must be tested and certified to the FCC that it does
not exceed the limit established by the government-
adopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear) as
required by the FCC for each model. The highest SAR
value for this model phone when tested for use at the
ear is 0.78 W/Kg. While there may be differences
between the SAR levels of various phones and at
various positions, they all meet the government
requirement.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels evaluated
as in compliance with the FCC RF emission guidelines.
SAR information on this model phone is on file with the
FCC and can be found under the Display Grant section
ID GMLNHA-9 or GMLNHA-9S.
___________________________________________
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard incor-
porates a substantial margin of safety to give additional
protection for the public and to account for any variations
in measurements.
77
Reference Information
Care and Maintenance
Your phone is a product of superior design and crafts-
manship and should be treated with care. The sugges-
tions below will help you to fulfill any warranty
obligations and allow you to enjoy this product for
many years. When using your phone, battery, charger,
OR any accessory:
•
•
•
•
Keep it and all its parts and accessories out of small
children’s reach.
Keep it dry. Precipitation, humidity and liquids con-
tain minerals that will corrode electronic circuits.
Do not use or store it in dusty, dirty areas as its
moving parts can be damaged.
Do not store it in hot areas. High temperatures can
shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
•
Do not store it in cold areas. When the phone
warms up (to its normal operating temperature),
moisture can form inside the phone, which may
damage the phone's electronic circuit boards.
•
•
•
Do not attempt to open it. Non-expert handling of
the device may damage it.
Do not drop, knock or shake it. Rough handling can
break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean it. Wipe it with a soft
cloth slightly dampened in a mild soap-and-water
solution.
•
•
Do not paint it. Paint can clog the device’s moving
parts and prevent proper operation.
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications or
attachments could damage the phone and may
violate regulations governing radio devices.
•
•
If the phone, battery, charger, or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
ATM and/or credit cards brought into contact with
the phone's cover may be demagnetized and infor-
mation stored on the card erased. Avoid storage of
ATM and/or credit cards near your phone.
78
Reference Information
12. Troubleshooting
If the power does not come on or stay on:
• Make sure the battery is properly installed and
charged.
• Be sure that the contacts on the battery and
the charging stand are clean.
• Battery charge may be too low for operation.
Check the display and listen for the low bat-
tery warning tones.
If the power comes on, but the phone does not
work:
• If the phone displays NO SERVICE, you’re out
of the service area and you can’t make calls.
You also get this message if you’ve chosen
Home Only in the Carrier Selection menu
(Menu 5 1 1), and you’ve left your Home
system.
• Make sure that the antenna is properly
installed and if your phone has an extendable
antenna, make sure that the antenna is
extended to its full length.
• Check if there is an error message on the
display after switching the phone on. If so,
contact your local dealer.
79
Troubleshooting
13. Technical Information
Weight:
4.5 oz. (127g)
Transmitting power:
Operating voltage:
0.6 watt max ERP
3.6V dc
12V dc for car kit
Frequency band:
824.040 to 848.970MHz (TX)
869.040 to 893.970MHz (RX)
Number of channels:
Phone Book capacity:
823 (NAMPS 2412)
Up to 75 locations (see Note).
Note: The maximum number of Phone Book entries
depends on how much information you store in each
location. See “The Phone Book” on page 23.
Nokia, Nokia Connecting People and the Original Accessories
logos are trademarks of Nokia Corporation and/or its affiliates.
The information contained in this User Guide was written for
Nokia phone NHA-9NA/NHA-9SA.
The right to make changes and improvements to any of the
products described in this guide without prior notice is reserved.
Issue No. 3. © 1998/1999/2000 Nokia Mobile Phones. All rights
reserved.
These commodities are authorized by the U.S. Government for
export only to Canada, Mexico, or the United States. They may
not be resold, diverted, transferred, or otherwise disposed of in
any other country, either in their original form or after being
incorporated through an intermediate process into other end-
items, without the written approval of the U.S. Department of
State.
10/00
Printed in Canada
80
Technical Information
14. Warranty
NOKIA One-Year Limited Warranty
Nokia Mobile Phones, Inc. (“NMP”) warrants that this
cellular phone (“Product”) is free from defects in
material and workmanship that result in Product failure
during normal usage, according to the following terms
and conditions:
1. The limited warranty for the Product extends for ONE
(1) year beginning on the date of the purchase of the
Product.
2. The limited warranty extends to the original
purchaser of the Product (“Consumer”) and is not
assignable or transferable to any subsequent
purchaser/end-user.
3. The limited warranty extends only to Consumers who
purchase the Product in the United States.
4. During the limited warranty period, NMP will repair,
or replace, at NMP's option, any defective parts, or any
parts that will not properly operate for their intended
use with new or factory rebuilt replacement items if
such repair or replacement is needed because of
product malfunction or failure during normal usage.
No charge will be made to the Consumer for any such
parts. NMP will also pay for the labor charges incurred
by NMP in repairing or replacing the defective parts.
The limited warranty does not cover defects in
appearance, cosmetic, decorative or structural items,
including framing, and any non-operative parts. NMP's
limit of liability under the limited warranty shall be the
actual cash value of the Product at the time the
Consumer returns the Product for repair, determined by
the price paid by the Consumer for the Product less a
reasonable amount for usage. NMP shall not be liable
for any other losses or damages. These remedies are the
Consumer’s exclusive remedies for breach of warranty.
5. Upon request from NMP, the Consumer must prove
the date of the original purchase of the Product by a
dated bill of sale or dated itemized receipt.
81
Warranty
6. The Consumer shall bear the cost of shipping the
Product to NMP in Melbourne, Florida. NMP shall bear
the cost of shipping the Product back to the Consumer
after the completion of service under this limited
warranty.
7. The Consumer shall have no coverage or benefits
under this limited warranty if any of the following
conditions are applicable:
a) The Product has been subject to abnormal use,
abnormal conditions, improper storage, exposure to
moisture or dampness, unauthorized modifications,
unauthorized connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper installa-
tion, or other acts which are not the fault of NMP,
including damage caused by shipping.
b) The Product has been damaged from external causes
such as collision with an object, or from fire, flooding,
sand, dirt, windstorm, lightning, earthquake or damage
from exposure to weather conditions, an Act of God, or
battery leakage, theft, blown fuse, or improper use of
any electrical source, or damage caused by the
connection to other products not recommended for
interconnection by NMP.
c) NMP was not advised by the Consumer in writing of
the alleged defect or malfunction of the Product within
fourteen (14) days after the expiration of the applicable
limited warranty period.
d) The Product serial number plate or the accessory
data code has been removed, defaced or altered.
e) The defect or damage was caused by the defective
function of the cellular system or by inadequate signal
reception by the external antenna.
8. If a problem develops during the limited warranty
period, the Consumer shall take the following step-by-
step procedure:
a) The Consumer shall return the Product to the place
of purchase for repair or replacement processing.
82
Warranty
b) If “a” is not convenient because of distance (more
than 50 miles) or for other good cause, the Consumer
shall ship the Product prepaid and insured to:
Nokia Mobile Phones, Inc.
Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL. 32901
c) The Consumer shall include a return address, daytime
phone number and/or fax number, complete description
of the problem, proof of purchase and service agree-
ment (if applicable). Expenses related to removing the
Product from an installation are not covered under this
limited warranty.
d) The Consumer will be billed for any parts or labor
charges not covered by this limited warranty. The Con-
sumer will be responsible for any expenses related to
reinstallation of the Product.
e) NMP will repair or authorize the repair of the Prod-
uct under the limited warranty within 30 days after
receipt of the Product by NMP or an NMP authorized
service center. If NMP cannot perform repair covered
under this limited warranty within 30 days, or after a
reasonable number of attempts to repair the same
defect, NMP at its option, will provide a replacement
Product or refund the purchase price of the Product less
a reasonable amount for usage.
f) If the Product is returned to NMP during the limited
warranty period, but the problem with the Product is not
covered under the terms and conditions of this limited
warranty, the Consumer will be notified and given an
estimate of the charges the Consumer must pay to have
the Product repaired, with all shipping charges billed to
the Consumer. If the estimate is refused, the Product will
be returned freight collect. If the Product is returned to
NMP after the expiration of the limited warranty period,
NMP's normal service policies shall apply and the Con-
sumer will be responsible for all shipping charges.
9. The Product consists of newly assembled equipment
that may contain used components that have been
reprocessed to allow machine compliance with Product
performance and reliability specifications.
83
Warranty
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY,
OR FITNESS FOR A PARTICULAR PURPOSE OR USE,
SHALL BE LIMITED TO THE DURATION OF THE FOREGO-
ING LIMITED WRITTEN WARRANTY. OTHERWISE, THE
FOREGOING LIMITED WARRANTY IS THE CONSUMER'S
SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED. NMP
SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT
LIMITED TO, LOSS OF ANTICIPATED BENEFITS OR
PROFITS, LOSS OF SAVINGS OR REVENUE, PUNITIVE
DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY
ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF
ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWN-
TIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING
CUSTOMERS, AND INJURY TO PROPERTY, RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM BREACH OF THE WARRANTY, BREACH
OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY
OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NMP
KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NMP
SHALL NOT BE LIABLE FOR DELAY IN RENDERING
SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF
USE DURING THE PERIOD THAT THE PRODUCT IS BEING
REPAIRED.
11. Some states do not allow limitation of how long an
implied warranty lasts, so the above one-year warranty
limitation may not apply to you (the Consumer).
Some states do not allow the exclusion or limitation of
incidental and consequential damages, so certain of the
above limitations or exclusions may not apply to you
(the Consumer). This limited warranty gives the
Consumer specific legal rights and the Consumer may
also have other rights which vary from state to state.
12. NMP neither assumes nor authorizes any authorized
service center or any other person or entity to assume
for it any other obligation or liability beyond that which
is expressly provided for in this limited warranty
including the provider or seller of any extended
warranty or service agreement.
84
Warranty
13. This is the entire warranty between NMP and the
Consumer, and supersedes all prior and contemporan-
eous agreements or understandings, oral or written,
and all communications relating to the Product, and no
representation, promise or condition not contained
herein shall modify these terms.
14. This limited warranty allocates the risk of failure of
the Product between the Consumer and NMP. The allo-
cation is recognized by the Consumer and is reflected in
the purchase price of the Product.
15. Any action or lawsuit for breach of warranty must
be commenced within eighteen (18) months following
delivery of the Product.
16. Questions concerning this limited warranty may be
directed to:
Nokia Customer Care Center, USA
Nokia Mobile Phones, Inc.
7725 Woodland Center Boulevard, Suite #150
Tampa, FL 33614
Telephone: 1-888-NOKIA2U (1-888-665-4228)
Facsimile: (1) 813 249-9619
17. The limited warranty period for NMP supplied
attachments and accessories is specifically defined
within their own warranty cards and packaging.
©Nokia is a registered trademark of Nokia Corporation.
85
Warranty
calling card 45
calls 20
15. Index
entering information
about 46
calling line identification
15, 63
Symbols
’+’ (link) character 25
’p’ (pause) character
25, 60
calls
’w’ (wait) character 25, 60
answering 14
automatic answer 39
ending 14
international 13
making 13
making an emergency
call 76
calls lists
Numerics
1-touch dialing 16, 38
9 key. See also
emergency 9 dialing 17
A
active open 40
allowed calls 45
automatic answer 39
automatic redial 39
dialed calls 35
erasing 35
missed calls 35
received calls 35
Car profile 18
carrier selection 42
chargers 8, 69–70
CLR key 13
B
battery 7–11
charge indicator 5
charging 8
charging times 8
disposal 12
fitting 7
removing 10
talk and standby times
9
to edit name or
number 32
to end PIN Call
attempt 21
to exit Menu 30
D
BATTERY LOW 9
data mode 59
dialed calls list 35
digital message service
65
display
indicators 5
DTMF 58, 60
C
call log 34
CALL NOT ALLOWED 13
call timers 36
call waiting 64
callback number service
67
86
Index
messages
alert tone 50
erasing 49
menu 48
reading 49
text message indicator
5
voice and text 22
voicemail indicator 5
missed calls list 35
My tones profile 18
E
emergency 9 dialing
17, 38
emergency calls 17, 76
making 76
with keyguard active 18
F
flash function 61
H
house indicator 5
N
I
network services 63
NO SERVICE 13, 43, 79
Normal profile 18
notepad memory 27
in-call menu 57
indicators
AB 5
ABC 5
O
K
overflow indicator 5
Keyguard 17
keypad tones 37
P
phone book 23–28
editing an entry 31
erasing entries from 33
finding entries in 31
giving an entry VIP
status 28
linking locations 25
location 75 25, 48
location number
indicator 5
maximum number of
locations 23
menu 31
moving an entry 28
notepad 27
saving entries in 23, 31
status of 33
L
language 39
lights 37
lock code 41
lock phone 48
LOCKED 48
Loud profile 18
M
menu
accessing 30
in-call 57
shortcut method 30
summary 29
using during a call 31
message waiting 65
87
Index
phone indicator 5
phone number 39
PIN calls 21
pointer 5
preferred network 43
profile
selecting 18
useful information
about 19
S
safety guidelines 1, 73
security code 41
short message service 67
signal strength 6
indicator 5, 6
Silent profile 18
speed dialing 16
SYSTEM BUSY... 39
Q
T
Quiet profile 18
touch tones 58, 60
R
V
ready screen 4
received calls list 35
RECHARGE BATTERY 9
redial
VIP entry
menu 33
VIP feature 28
voicemail 15, 65
indicator 5
volume
automatic 39
last 15 dialed calls 16
last number 16
REPLACE? 23, 32
restore factory settings
42
earpiece 16, 18
ringing 18, 37
W
ringing
warranty 81
welcome note
menu 40
options 36
tone 37
volume 37
roam beep 40
Para obtener un manual del usuario en español
favor de llamar o enviar un fax al teléfono
1-888-Nokia 2U, fax 813-249-9619.
For alternate formats of this owner's manual, call our
Customer Care center at 1 800 665-4228 (NOKIA 2U).
88
Index
|