Bosch Appliances Computer Accessories 1200 User Manual

1200 and 1400 Series iSCSI Disk Arrays  
DLA-AIO  
de Software Manual  
nl  
Softwarehandleiding  
en Software Manual  
pl  
pt  
ru  
zh  
Instrukcja obsługi oprogramowania  
Manual do software  
Руководство для программного обеспечения  
es  
fr  
it  
Manual del software  
Manuel du logiciel  
Manuale del software  
ソフトウェアマニュアル  
软件手册  
ja  
|
3
de  
en  
es  
fr  
Software Manual  
Software Manual  
Manual del software  
Manuel du logiciel  
Manuale del software  
it  
ja  
ソフトウェアマニュアル  
nl  
pl  
pt  
ru  
Softwarehandleiding  
Instrukcja obsługi oprogramowania  
Manual do software  
Руководство для программного обеспечения  
zh  
软件手册  
| |  
4
|
| |  
1200 und 1400 Series iSCSI Disk Arrays  
Inhaltsverzeichnis | de  
5
Inhaltsverzeichnis  
Kurzinformation  
Systemüberblick  
Übersicht über iSCSI  
iSCSI-Netzwerkkomponenten  
Microsoft iSCSI-Softwareziel-Komponenten  
Konfigurieren des Systems  
Windows Update deaktivieren  
Konfigurieren der Windows-Firewall für das iSCSI-Softwareziel  
iSCSI-Ziele konfigurieren  
iSCSI-Ziele erzeugen  
Einfaches Volume erzeugen  
Virtuellen Datenträger erzeugen  
iSCSI LUN Einstellungen verändern  
Bosch Sicherheitssysteme GmbH  
Software Manual  
Doc | V1 | 2010.09  
 
6
de | Kurzinformation  
1200 und 1400 Series iSCSI Disk Arrays  
1
Kurzinformation  
Die werksseitig voreingestellte IP-Adresse des Gerätes: 10.10.10.10 am ersten Port.  
Alle Bosch DLA Series Disk Arrays sind vorkonfiguriert mit werksseitig voreingestellten IP-  
Adressen und mit werksseitig voreingestellten iSCSI-Einstellungen.  
Die werksseitig voreingestellten iSCSI-Einstellungen sind optimiert fur die Nutzung mit VRM.  
Nur erfahrene Archivierungssystemadministratoren sollten Änderungen an diesen  
Einstellungen vornehmen. Die folgenden Konfigurationsschritte müssen nur dann befolgt  
werden, wenn VRM nicht verwendet wird, oder wenn die werksseitigen Voreinstellungen nicht  
geeignet sind für eine andere Bosch iSCSI-Anwendung.  
Das Microsoft Windows Storage Server 2008-Betriebssystem bietet eine Benutzeroberfläche  
für die Servererstkonfiguration, einheitliche Verwaltung von Speichervorrichtungen, einfache  
Einrichtung und Verwaltung von Speicher und freigegebenen Ordnern sowie Unterstützung für  
das Microsoft iSCSI-Softwareziel. Es ist speziell auf die Bereitstellung optimaler Leistung für  
an das Netzwerk angeschlossenen Speicher (Network Attached Storage, NAS) abgestimmt.  
Windows Storage Server 2008 bietet erhebliche Verbesserungen im Bereich der Freigabe- und  
Speicherverwaltung sowie integrierte Komponenten und Funktionen zur Verwaltung von  
Speichervorrichtungen.  
Doc | V1 | 2010.09  
Software Manual  
Bosch Sicherheitssysteme GmbH  
 
1200 und 1400 Series iSCSI Disk Arrays  
Systemüberblick | de  
7
2
Systemüberblick  
Mit dem Microsoft iSCSI-Softwareziel in Windows Storage Server 2008 können Sie iSCSI-Ziele  
erstellen und verwalten, virtuelle Datenträger erstellen und verwalten sowie die  
Unterstützung von Sicherung und Wiederherstellung mit Snapshots implementieren.  
Hinweis  
Das Microsoft iSCSI-Softwareziel ist auf allen Bosch DLA Modellen vorinstalliert und  
vorkonfiguriert. Wenn es nicht mit Ihrer Speichervorrichtung installiert oder bereitgestellt  
wurde, wenden Sie sich an den Hersteller der Speichervorrichtung, um Informationen zum  
Erhalt des Microsoft iSCSI-Softwareziels zu erhalten.  
2.1  
Übersicht über iSCSI  
Zur Aktivierung eines Datenträgercontrollers für die Kommunikation mit Laufwerken stehen  
mehrere Protokolle zur Verfügung, beispielsweise ATA (SATA) und SCSI (SAS). Bei diesen  
Protokollen handelt es sich um vordefinierte Standards, mit denen festgelegt wird, wie  
Befehle (z. B. Lese- und Schreibanforderungen) verpackt und zwischen dem Controller und  
dem Laufwerk gesendet werden. Das iSCSI-Protokoll erweitert die SCSI-Standards durch die  
Kapselung von SCSI-Befehlen in TCP/IP-Paketen. Diese Befehle werden über ein TCP/IP-  
Netzwerk gesendet, sodass Server auf Speicher in einem Storage Area Network (SAN)  
zugreifen können. Dies vereinfacht die Implementierung und die zentrale Verwaltung von  
konsolidiertem Speicher einschließlich der zentralen Sicherung und Remotewiederherstellung  
von Systemen.  
2.1.1  
iSCSI-Netzwerkkomponenten  
Ein iSCSI-Netzwerk umfasst drei Komponenten:  
iSCSI-Ziel  
Das iSCSI-Ziel dient zur Bereitstellung von Speicher wie auch lokal verbundene Datenträger.  
Der Zugriff auf diesen Speicher erfolgt jedoch nicht lokal, sondern über ein Netzwerk. Diese  
Funktionalität wird in Windows Storage Server 2008 mit dem Microsoft iSCSI-Softwareziel  
bereitgestellt.  
iSCSI-Initiator  
Der iSCSI-Initiator wird in einigen Fällen auch als Client bezeichnet. Das iSCSI-Ziel stellt den  
Speicher für den iSCSI-Initiator bereit, der als Datenträgercontroller für die vom Ziel  
gehosteten Datenträger fungiert.  
Speicherstruktur  
Hierbei handelt es sich um ein IP-basiertes (Internetprotokoll) Netzwerk, das zur Verbindung  
zwischen iSCSI-Ziel und iSCSI-Initiator dient. Die Speicherstruktur ist normalerweise ein  
Gigabit-LAN (Local Area Network, lokales Netzwerk).  
2.1.2  
Microsoft iSCSI-Softwareziel-Komponenten  
Das Microsoft iSCSI-Softwareziel-Paket umfasst drei Komponenten:  
Microsoft iSCSI-Softwareziel – Mit dieser Komponente können Sie virtuelle Datenträger  
und iSCSI-Ziele erstellen und verwalten sowie die Sicherung und Wiederherstellung von  
iSCSI-Zielen auf Basis von Snapshots ermöglichen.  
VSS-Hardwareanbieter – Der VSS-Hardwareanbieter (Volume Shadow Copy Service,  
Volumeschattenkopie-Dienst) wird auf dem Initiatorcomputer installiert und bietet  
zusammen mit dem VSS-Dienst anwendungskonsistente Snapshots von virtuellen iSCSI-  
Datenträgern auf Computern mit dem Microsoft iSCSI-Softwareziel.  
VDS-Hardwareanbieter – Der VDS-Hardwareanbieter (Virtual Disk Service, Dienst für  
virtuelle Datenträger) wird auf einem Initiatorcomputer installiert und ermöglich die  
Bosch Sicherheitssysteme GmbH  
Software Manual  
Doc | V1 | 2010.09  
       
8
de | Systemüberblick  
1200 und 1400 Series iSCSI Disk Arrays  
Verwaltung virtueller Datenträger auf einer Speichervorrichtung mit dem Microsoft iSCSI-  
Softwareziel durch für VDS geeignete Anwendungen.  
Hinweis  
Der Microsoft iSCSI-Initiator kann keine Verbindung mit einem Microsoft iSCSI-Softwareziel  
herstellen, das auf demselben Computer ausgeführt wird. Bosch iSCSI Disk Arrays, die auf  
Windows Storage Server 2008 basieren, verwenden nur die iSCSI-Ziel-Funktionalität. Die  
Bosch All-In-One Speicherlösungen, die eine Bosch-Anwendung auf einem Speicher-Array  
laufen lassen, stellen ihren eigenen iSCSI-Initiator bereit. Jeder iSCSI-Initiator kann sich zum  
selben Ziel verbinden.  
Doc | V1 | 2010.09  
Software Manual  
Bosch Sicherheitssysteme GmbH  
1200 und 1400 Series iSCSI Disk Arrays  
Konfigurieren des Systems | de  
9
3
Konfigurieren des Systems  
Diese Kapitel stellt Information bereit für die Vorbereitung des iSCS-Gerätes vor seinem  
Einsatz. Diese Aufgaben wurden bereits auf einem iSCSI-Gerät durchgeführt, das sie  
erworben haben, da alle Bosch DLA iSCSI Disk Arrays vorinstalliert und vorkonfiguriert  
ausgeliefert werden. Wenn Sie aber Festplatten, die nicht RAID-geschützt waren, auf einem  
iSCSI-Gerät wechseln, müssen Sie einige dieser Konfigurationsaufgaben erneut ausführen.  
3.1  
3.2  
Windows Update deaktivieren  
So deaktivieren Sie Windows Update:  
1. Öffnen Sie Server Manager.  
2. Im Abschnitt Security Information klicken Sie auf Configure Updates, klicken Sie auf  
Change Settings, und wählen Sie Never check for updates.  
3. Klicken Sie OK.  
Konfigurieren der Windows-Firewall für das iSCSI-Softwareziel  
Sie müssen die Windows-Firewall konfigurieren, um den dafür benötigten  
Netzwerkdatenverkehr zuzulassen. In der folgenden Tabelle sind die erforderlichen Ports  
aufgeführt.  
Port oder Anwendung  
TCP 3260  
Beschreibung  
Microsoft iSCSI-Softwareziel-Dienst. Dieser Port stellt  
den primären Zugriff auf das Microsoft iSCSI-  
Softwareziel bereit.  
TCP 135  
UDP 138  
Remoteprozeduraufruf (RPC). Dieser Port ist für den  
Component Object Model (COM)-Datenverkehr  
erforderlich.  
NetBIOS-Datagrammdienst. Diese Ausnahme ist in  
der Regel für die Rolle Datei- und Druckdienste  
bereits vorhanden, muss ggf. aber manuell  
hinzugefügt werden.  
%windir%\System32\Wintarget.exe  
Microsoft iSCSI-Softwareziel-Dienst  
%windir%\System32\WTStatusProxy Microsoft iSCSI-Softwareziel-Statusproxy  
.exe  
Hinweis  
Möglicherweise treten RPC-Fehler (Remote Procedure Call, Remoteprozeduraufruf) auf, wenn  
Sie versuchen, ein Microsoft iSCSI-Softwareziel remote zu verwalten, dafür aber die  
Ausnahme der Windows-Firewall für WTStatusProxy.exenicht konfiguriert haben.  
In der folgenden Tabelle sind die Ausnahmen der Windows-Firewall aufgeführt, die auf dem  
iSCSI-Initiatorcomputer eingerichtet werden sollten.  
Anwendungsausnahme  
Beschreibung  
%windir%\System32\Wtvds.exe  
Der VDS-Hardwareanbieter für das Microsoft  
iSCSI-Softwareziel  
So fügen Sie eine eingehende Filterregel für ein Programm hinzu:  
1. Öffnen Sie die Windows-Firewall mit erweiterter Sicherheit. Erweitern Sie im Server-  
Manager den Knoten Konfiguration, erweitern Sie Windows-Firewall mit erweiterter  
Sicherheit, und klicken Sie dann auf Eingehende Regeln.  
Bosch Sicherheitssysteme GmbH  
Software Manual  
Doc | V1 | 2010.09  
     
10 de | Konfigurieren des Systems  
1200 und 1400 Series iSCSI Disk Arrays  
2. Klicken Sie im Bereich Aktionen auf Neue Regel.  
3. Klicken Sie unter Welchen Regeltyp möchten Sie erstellen? auf Programm und dann auf  
Weiter.  
4. Klicken Sie auf Durchsuchen, navigieren Sie zum Ordner %windir%\System32, und  
klicken Sie auf Wintarget.exe. Klicken Sie auf Öffnen und dann auf Weiter.  
5. Klicken Sie auf Verbindung zulassen und dann auf Weiter.  
6. Wählen Sie die Netzwerkorte aus, für die diese Regel gelten soll (Standardeinstellung ist  
Domäne, Privat und Öffentlich). Klicken Sie auf Weiter.  
7. Geben Sie im Feld Name einen beschreibenden Namen für die Regel ein. Für die  
Programmregel für Wintarget.exe können Sie beispielsweise Microsoft iSCSI-  
Softwarezieldienst eingeben. Klicken Sie auf Fertig stellen.  
So fügen Sie eine eingehende Filterregel für einen Port hinzu:  
1. Öffnen Sie die Windows-Firewall mit erweiterter Sicherheit. Erweitern Sie im Server-  
Manager den Knoten Konfiguration, erweitern Sie Windows-Firewall mit erweiterter  
Sicherheit, und klicken Sie dann auf Eingehende Regeln.  
2. Klicken Sie im Bereich Aktionen auf Neue Regel.  
3. Klicken Sie unter Welchen Regeltyp möchten Sie erstellen? auf Port und dann auf  
Weiter.  
4. Wählen Sie das Protokoll für die Regel aus, entweder TCP oder UDP. Klicken Sie unter  
Betrifft diese Regel alle lokalen oder nur einen bestimmten lokalen Port? auf  
Bestimmte lokale Ports, und geben Sie die entsprechende Portnummer ein.  
5. Klicken Sie auf Verbindung zulassen und dann auf Weiter.  
6. Wählen Sie die Netzwerkorte aus, für die diese Regel gelten soll (Standardeinstellung ist  
Domäne, Privat und Öffentlich). Klicken Sie auf Weiter.  
7. Geben Sie im Feld Name einen beschreibenden Namen für die Regel ein. Für den RPC-  
Datenverkehr an Port 135 können Sie beispielsweise Remoteprozeduraufruf eingeben.  
Klicken Sie auf Fertig stellen.  
So konfigurieren Sie die Windows Firewall-Einstellungen auf der Befehlszeile mit dem  
folgenden Besipielskript:  
1. netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-TCP-3260" dir=in action=allow protocol=TCP  
localport=3260  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-TCP-135" dir=in action=allow protocol=TCP localport=135  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-UDP-138" dir=in action=allow protocol=UDP localport=138  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service" dir=in action=allow  
program="%SystemRoot%\System32\WinTarget.exe" enable=yes  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service Status Proxy" dir=in action=allow  
program="%SystemRoot%\System32\WTStatusProxy.exe" enable=yes  
Doc | V1 | 2010.09  
Software Manual  
Bosch Sicherheitssysteme GmbH  
1200 und 1400 Series iSCSI Disk Arrays  
iSCSI-Ziele konfigurieren | de  
11  
4
iSCSI-Ziele konfigurieren  
Die Datenträger, die Sie mit dem iSCSI-Softwareziel erzeugen, sind virtuelle iSCSI  
Datenträger, die als Dateien im virtuellen Harddisk-Format (VHD) vorliegen.  
Führen Sie die folgenden Aufgaben durch, um Ihre iSCSI-Ziele zu konfigurieren:  
4.1  
iSCSI-Ziele erzeugen  
1. Klicken Sie auf Start und klicken Sie dann Server Manager.  
2. Erweitern Sie Storage, erweitern Sie Microsoft iSCSI Software Target, und dann klicken  
Sie auf iSCSI Targets.  
3. Klicken Sie mit der rechten Maustaste iSCSI Targets, und klicken Sie dann auf Create  
iSCSI Targets.  
Das Create iSCSI Target Wizard Dialogfeld wird angezeigt.  
4. Klicken Sie auf Next>.  
5. Im Feld iSCSI target name, geben Sie den gewünschten Namen ein.  
Geben Sie eine Beschreibung für das neue iSCSI-Ziel ein, wenn gewünscht.  
Klicken Sie auf Next>.  
6. Im Feld IQN identifier geben Sie *ein.  
Bosch Sicherheitssysteme GmbH  
Software Manual  
Doc | V1 | 2010.09  
     
12 de | iSCSI-Ziele konfigurieren  
1200 und 1400 Series iSCSI Disk Arrays  
7. Klicken Sie auf Next>.  
8. Klicken Sie auf Finish.  
Das iSCSI-Ziel wird zur Liste iSCSI Targets des Server Manager hinzugefügt.  
Note: Nur ein iSCSI-Ziel muss erzeugt werden, weil alle LUNS in einer Zielkonfiguration  
sich befinden müssen.  
4.2  
Einfaches Volume erzeugen  
1. Starten Sie Server Manager.  
2. Erweitern Sie Storage, und dann klicken Sie auf Disk Management.  
Doc | V1 | 2010.09  
Software Manual  
Bosch Sicherheitssysteme GmbH  
   
1200 und 1400 Series iSCSI Disk Arrays  
iSCSI-Ziele konfigurieren | de  
13  
3. Klicken Sie mit der rechten Maustaste auf Disk 1, und klicken Sie auf Online.  
4. Klicken Sie mit der rechten Maustaste auf den nicht-zugeordneten Platz auf dem  
dynamischen Datenträger, auf dem Sie das einfache Volume erzeugen wollen, und dann  
klicken Sie auf New Simple Volume.  
5. Im New Simple Volume Wizard klicken Sie auf Next>.  
6. In der Dialogbox Specify Volume Size, lassen Sie die Voreinstellungen unverändert und  
klicken auf Next>.  
7. In der Dialogbox Assign Drive Letter or Path , geben Sie den gewünschten  
Laufwerksbuchstaben an und klicken auf Next>.  
Bosch Sicherheitssysteme GmbH  
Software Manual  
Doc | V1 | 2010.09  
14 de | iSCSI-Ziele konfigurieren  
1200 und 1400 Series iSCSI Disk Arrays  
8. In der Dialogbox Format Partition, aktivieren Sie Format this volume with the following  
settings.  
In der Liste File system, wählen Sie NTFS.  
In der Liste Allocation unit size, wählen Sie 64K.  
Im Feld Volume label, geben Sie eine Beschreibung ein für das neue Volume.  
Aktivieren Sie Perform a quick format.  
Klicken Sie auf Next>.  
Die letzte Dialogbox vom New Simple Volume Wizard wird angezeigt.  
9. Prüfen Sie Ihre Angaben, und klicken Sie Finish.  
4.3  
Virtuellen Datenträger erzeugen  
1. Starten Sie Server Manager.  
2. Erweitern Sie Storage, erweitern Sie Microsoft iSCSI Software Target, erweitern Sie  
iSCSI Targets, und dann klicken Sie dann mit der rechten Maustaste auf Ihr bereits  
hinzugefügtes iSCSI-Ziel.  
Doc | V1 | 2010.09  
Software Manual  
Bosch Sicherheitssysteme GmbH  
   
1200 und 1400 Series iSCSI Disk Arrays  
iSCSI-Ziele konfigurieren | de  
15  
3. Klicken Sie auf Create Virtual Disk for iSCSI Target.  
4. Im Create Virtual Disk Wizard klicken Sie auf Next>.  
5. In der Dialogbox File, geben Sie einen voll qualifizierten Dateinamen ein. Geben Sie  
unbedingt auch die Erweiterung .vhd. ein  
6. Klicken Sie auf Next>.  
Bosch Sicherheitssysteme GmbH  
Software Manual  
Doc | V1 | 2010.09  
16 de | iSCSI-Ziele konfigurieren  
1200 und 1400 Series iSCSI Disk Arrays  
7. In der Dialogbox Size, geben Sie die Größe des neuen virtuellen Datenträgers in MB ein.  
Um die Festplatte optimal auszunutzen, geben Sie den Wert des Feldes Currently  
available free space multpliziert mit 1024 ein.  
Hinweis:  
Die Größe der .vhdDatei ist identisch mit der Größe der LUN und darf 2 TB nicht  
überschreiten, weil die BVIP-Firmware eine LUN-Größe bis zu 2 TB unterstützt.  
8. Klicken Sie auf Next>.  
Der virtuelle Datenträger ist erzeugt.  
Mit der Anleitung, die in diesem Kapitel beschrieben wird, können Sie soviele weitere  
Datenträger erzeugen bis die Kapazität der physikalischen Festplatte erschöpft ist.  
Der Disk Array ist nun erfolgreich konfiguriert, und Sie können ihn für die jeweilige iSCSI-  
Anwendung verwenden.  
4.4  
iSCSI LUN Einstellungen verändern  
Wenn Sie Ihre LUN Einstellungen ändern müssen, müssen Sie die LUNs zuerst löschen und sie  
danach erneut konfigurieren.  
So löschen Sie eine LUN:  
1. Starten Sie Server Manager.  
2. Klicken Sie mit der rechten Maustaste auf den virtuellen Datenträger (=LUN) und klicken  
Sie auf Delete Virtual Disk.  
3. Klicken Sie auf Yes zum Bestätigen der folgenden Warnmeldung.  
4. Um die Kapazität tatsächlich freizugeben, löschen Sie die .vhdDatei manuell im  
Windows Explorer.  
Nun können Sie Ihre LUNs konfigurieren wie beschrieben in den Abschnitten 4.1 - 4.3 .  
Doc | V1 | 2010.09  
Software Manual  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Table of Contents | en  
17  
Table of Contents  
Short Information  
System Overview  
iSCSI Overview  
iSCSI Network Components  
Microsoft iSCSI Software Target Components  
Configuring the system  
Disabling Windows Update  
Configuring Windows Firewall for iSCSI Software Target  
Configuring iSCSI targets  
Creating an iSCSI target  
Creating a simple volume  
Creating a virtual disk  
Modifying iSCSI LUN settings  
Bosch Sicherheitssysteme GmbH  
Software Manual  
Doc | V1 | 2010.09  
 
18 en | Short Information  
1200 and 1400 Series iSCSI Disk Arrays  
1
Short Information  
The default IP address of the device is: 10.10.10.10 on first port  
All Bosch DLA Series disk arrays are preconfigured with a default IP address and with default  
iSCSI settings.  
Default iSCSI settings are optimized for use with VRM. Only an experienced storage  
administrator should make changes to these settings. The following configuration steps are  
only required if VRM is not in use, or if the default setting are not appropriate for another  
Bosch iSCSI application.  
Microsoft Windows Storage Server 2008 operating systems provide a user interface for initial  
server configuration, unified storage appliance management, simplified setup and  
management of storage and shared folders, and support for Microsoft iSCSI Software Target.  
It is specially tuned to provide optimal performance for network-attached storage. Windows  
Storage Server 2008 provides significant enhancements in share and storage management  
scenarios, as well as integration of storage appliance management components and  
functionality.  
Doc | V1 | 2010.09  
Software Manual  
Bosch Sicherheitssysteme GmbH  
 
1200 and 1400 Series iSCSI Disk Arrays  
System Overview | en  
19  
2
System Overview  
With the Microsoft iSCSI Software Target in Windows Storage Server 2008, you can create  
and manage iSCSI targets, create and manage virtual disks for storage, and implement backup  
and recovery support by using snapshots.  
Note  
The Microsoft iSCSI Software Target is pre installed and pre configured on all Bosch DLA  
models. If it is not installed or provided together with your storage appliance, contact your  
storage appliance manufacturer for information about acquiring the Microsoft iSCSI Software  
Target.  
2.1  
iSCSI Overview  
Several protocols, such as ATA (SATA) and SCSI (SAS), are available for enabling a disk  
controller to communicate with disk drives. These protocols are predefined standards that  
determine how commands, such as read and write requests, are packaged and sent between  
the controller and disk drive. The iSCSI protocol extends the SCSI standards by encapsulating  
SCSI commands in TCP/IP packets. These commands are sent over a TCP/IP network, which  
enables servers to access storage on a storage area network (SAN). This facilitates  
implementation and centralized management of consolidated storage, including centralized  
backup and remote system recovery.  
2.1.1  
iSCSI Network Components  
In an iSCSI network, there are three components:  
iSCSI target  
The iSCSI target provides storage, similar to the disk drives of locally attached storage, but  
accessed over a network instead of locally. This functionality is provided in Windows Storage  
Server 2008 by the Microsoft iSCSI Software Target.  
iSCSI initiator  
The iSCSI initiator is sometimes referred to as the client. The iSCSI target provides the  
storage to the iSCSI initiator, which acts as a disk controller for the disks that are hosted by  
the target.  
Storage fabric  
This is an Internet Protocol (IP)-based network that connects the iSCSI target to the iSCSI  
initiator. The storage fabric is typically a gigabit local area network (LAN).  
2.1.2  
Microsoft iSCSI Software Target Components  
The Microsoft iSCSI Software Target package comprises three components:  
Microsoft iSCSI Software Target – This component lets you create and manage virtual  
disks, create and manage iSCSI targets, and provide backup and recovery of iSCSI  
targets through snapshots.  
Volume Shadow Copy Service (VSS) Hardware Provider – The VSS Hardware Provider is  
installed on the initiator computer and works with the VSS service to provide application  
consistent snapshots of iSCSI virtual disks on the computer that runs the Microsoft iSCSI  
Software Target.  
Virtual Disk Service (VDS) Hardware Provider – The VDS Hardware Provider is installed  
on an initiator computer and lets VDS-aware applications manage virtual disks on a  
storage appliance running the Microsoft iSCSI Software Target.  
Bosch Sicherheitssysteme GmbH  
Software Manual  
Doc | V1 | 2010.09  
       
20 en | System Overview  
1200 and 1400 Series iSCSI Disk Arrays  
Note  
The Microsoft iSCSI Initiator cannot connect to a Microsoft iSCSI Software Target that runs  
on the same computer. The Bosch iSCSI disk arrays based on Microsoft Windows Storage  
Server 2008 do only use the iSCSI target functionality. The Bosch All-in-one storage solutions  
running a Bosch application on the storage array provide their own iSCSI Initiator which can  
connect to the same target.  
Doc | V1 | 2010.09  
Software Manual  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Configuring the system | en  
21  
3
Configuring the system  
This chapter provides information on preparing the iSCSI device before usage. These tasks  
have already been performed on an iSCSI device that you just have purchased as all Bosch  
DLA disk arrays come pre-installed and pre-configured. But if you change hard disks that were  
not RAID protected on an iSCSI device, you must again perform some of these configuration  
tasks.  
3.1  
3.2  
Disabling Windows Update  
To disable Windows Update:  
1. Open Server Manager.  
2. In the Security Information section, click Configure Updates, click Change Settings and  
click to check Never check for updates.  
3. Click OK.  
Configuring Windows Firewall for iSCSI Software Target  
You must configure the Windows Firewall to allow the necessary network traffic to pass. The  
following table lists the required ports.  
Port or application  
TCP 3260  
Description  
Microsoft iSCSI Software Target Service. This port  
provides the primary access to the Microsoft iSCSI  
Software target.  
TCP 135  
UDP 138  
Remote Procedure Call (RPC), this port is required for  
Component Object Model (COM) communication.  
NetBIOS Datagram Service, this exception should already  
exist for File and Print Service role, but may need to be  
added manually if not present.  
%windir%\System32\Wintarg Microsoft iSCSI Software Target Service  
et.exe  
%windir%\System32\WTStatu Microsoft iSCSI Software Target status proxy  
sProxy.exe  
Note  
You may receive remote procedure call (RPC) errors when trying to remotely manage a  
Microsoft iSCSI Software Target if you do not configure the Windows Firewall exception for  
WTStatusProxy.exe.  
The following table contains the Windows Firewall exceptions that should be made on the  
iSCSI initiator computer.  
Application exception  
Description  
%windir%\System32\Wtvds.exe  
The Microsoft iSCSI Software Target VDS Hardware  
Provider  
To add an inbound filter rule for a program:  
1. Open Windows Firewall with Advanced Security. In Server Manager, expand  
Configuration, expand Windows Firewall with Advanced Security, and then click  
Inbound Rules.  
2. In the Actions pane, click New Rule.  
3. Under What type of rule would you like to create, click Program, and then click Next.  
Bosch Sicherheitssysteme GmbH  
Software Manual  
Doc | V1 | 2010.09  
     
22 en | Configuring the system  
1200 and 1400 Series iSCSI Disk Arrays  
4. Click Browse, browse to the %windir%\System32folder, and then click Wintarget.exe.  
Click Open and then click Next.  
5. Click Allow the connection, and then click Next.  
6. Select the network locations that should be bound to this rule (the default is Domain,  
Private, and Public). Click Next.  
7. Under Name, type a descriptive name for the rule. For example, type Microsoft iSCSI  
Software Target Service for the program rule for Wintarget.exe. Click Finish.  
To add an inbound filter rule for a port:  
1. Open Windows Firewall with Advanced Security. In Server Manager, expand  
Configuration, expand Windows Firewall with Advanced Security, and then click  
Inbound Rules.  
2. In the Actions pane, click New Rule.  
3. Under What type of rule would you like to create, click Port, and then click Next.  
4. Select the protocol for this rule, either TCP or UDP. Under Does this rule apply to all  
local ports or specific local ports, click Specific local ports and type in the appropriate  
port number.  
5. Click Allow the connection, and then click Next.  
6. Select the network locations that should be bound to this rule (the default is Domain,  
Private, and Public). Click Next.  
7. Under Name, type a descriptive name for the rule. For example, type Remote Procedure  
Call for the RPC communication on TCP port 135. Click Finish.  
To configure Window Firewall settigs from command line with the following sample script:  
1. netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-TCP-3260" dir=in action=allow protocol=TCP  
localport=3260netsh advfirewall firewall add rule name="Microsoft iSCSI  
Software Target Service-TCP-135" dir=in action=allow protocol=TCP  
localport=135  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-UDP-138" dir=in action=allow protocol=UDP localport=138  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service" dir=in action=allow  
program="%SystemRoot%\System32\WinTarget.exe" enable=yesnetsh  
advfirewall firewall add rule name="Microsoft iSCSI Software Target  
Service Status Proxy" dir=in action=allow  
program="%SystemRoot%\System32\WTStatusProxy.exe" enable=yes  
Doc | V1 | 2010.09  
Software Manual  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Configuring iSCSI targets | en  
23  
4
Configuring iSCSI targets  
The disks you create by using iSCSI Software Target are iSCSI virtual disks, which are files in  
the fixed virtual hard disk (VHD) format.  
You must perform the following tasks to configure your iSCSI targets:  
4.1  
Creating an iSCSI target  
1. Click Start and click Server Manager.  
2. Expand Storage, expand Microsoft iSCSI Software Target, and then click iSCSI Targets.  
3. Right-click iSCSI Targets and click Create iSCSI Targets.  
The Create iSCSI Target Wizard dialog box is displayed.  
4. Click Next>.  
5. In the iSCSI target name field, type the desired name.  
Type a description of the new iSCSI target if desired.  
Click Next>.  
6. In the IQN identifier field type *.  
Bosch Sicherheitssysteme GmbH  
Software Manual  
Doc | V1 | 2010.09  
     
24 en | Configuring iSCSI targets  
1200 and 1400 Series iSCSI Disk Arrays  
7. Click Next>.  
8. Click Finish.  
The iSCSI target is added in the iSCSI Targets list of the Server Manager.  
Note: Only one iSCSI target needs to be created as all LUNs should be put in one target  
configuration.  
4.2  
Creating a simple volume  
1. Start Server Manager.  
2. Expand Storage and then click Disk Management.  
Doc | V1 | 2010.09  
Software Manual  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Configuring iSCSI targets | en  
25  
3. Right-click Disk 1 and click Online.  
4. Right-click the unallocated space on the dynamic disk on which you want to create the  
simple volume, and then click New Simple Volume.  
5. In the New Simple Volume Wizard, click Next>.  
6. In the Specify Volume Size dialog box, leave the default settings unchanged and click  
Next>.  
7. In the Assign Drive Letter or Path dialog box, enter the desired drive letter and click  
Next>.  
8. In the Format Partition dialog box, click to check Format this volume with the following  
settings.  
In the File system list, select NTFS.  
In the Allocation unit size list, select 64K.  
In the Volume label field, type a description for the new volume.  
Click to check Perform a quick format.  
Click Next>.  
The final dialog box of the New Simple Volume Wizard is displayed.  
Bosch Sicherheitssysteme GmbH  
Software Manual  
Doc | V1 | 2010.09  
26 en | Configuring iSCSI targets  
1200 and 1400 Series iSCSI Disk Arrays  
9. Check your settings and click Finish.  
4.3  
Creating a virtual disk  
1. Start Server Manager.  
2. Expand Storage, expand Microsoft iSCSI Software Target, expand iSCSI Targets and  
then right-click your already added iSCSI target.  
3. Click Create Virtual Disk for iSCSI Target.  
4. In the Create Virtual Disk Wizard, click Next>.  
Doc | V1 | 2010.09  
Software Manual  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Configuring iSCSI targets | en  
27  
5. In the File dialog box, type a fully qualified filename. Do also use the extension .vhd.  
6. Click Next>.  
7. In the Size dialog box, type the size of the new virtual disk in MB. For the maximum value  
type the value of the Currently available free space field multiplied with 1024.  
Note:  
The size of the .vhdfile equals the size of the LUN and must not exceed 2TB as the BVIP  
firmware supports a LUN size of up to 2TB.  
8. Click Next>.  
The virtual disk is created.  
With the procedure described in this chapter you can add as many further disks until the  
physical hard disk capacity is exhausted.  
The disk array now is successfully configured and you can use it for the respective iSCSI  
applications.  
4.4  
Modifying iSCSI LUN settings  
When you must change your LUN settings, you must first delete the LUNs and then  
reconfigure them.  
To delete a LUN:  
1. Start Server Manager.  
Bosch Sicherheitssysteme GmbH  
Software Manual  
Doc | V1 | 2010.09  
   
28 en | Configuring iSCSI targets  
1200 and 1400 Series iSCSI Disk Arrays  
2. Right-click the virtual disk (=LUN) and click Delete Virtual Disk.  
3. Click Yes to confirm the following warning message.  
4. To actually free the capacity, delete the .vhdfile manually in Windows Explorer.  
Now you can reconfigure your LUNs according to sections 4.1 - 4.3 .  
Doc | V1 | 2010.09  
Software Manual  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Índice | es  
29  
Índice  
Información abreviada  
Descripción del sistema  
Descripción de iSCSI  
Componentes de red iSCSI  
Componentes de Microsoft iSCSI Software Target  
Configuración del sistema  
Desactivación de Windows Update  
Configuración del Firewall de Windows para iSCSI Software Target  
Configuración de destinos iSCSI  
Creación de un destino iSCSI  
Creación de un volumen simple  
Creación de un disco virtual  
Modificación de la configuración de LUN de iSCSI  
Bosch Sicherheitssysteme GmbH  
Manual del software  
Doc | V1 | 2010.09  
 
30 es | Información abreviada  
1200 and 1400 Series iSCSI Disk Arrays  
1
Información abreviada  
La dirección IP predeterminada del dispositivo es 10.10.10.10 en el primer puerto.  
Todos los arrays de discos Serie DLA de Bosch vienen configurados con una dirección IP y  
unos ajustes iSCSI predeterminados.  
Los ajustes iSCSI predeterminados están optimizados para utilizarlos con VRM. Estos ajustes  
sólo deberá cambiarlos un administrador de almacenamiento debidamente cualificado. Los  
siguientes pasos de configuración sólo son necesarios si no se utiliza ningún VRM o si la  
configuración predeterminada no es la adecuada para otra aplicación iSCSI de Bosch.  
El sistema operativo Microsoft Windows Storage Server 2008 proporciona una interfaz para la  
configuración inicial del servidor, así como gestión unificada de dispositivos de  
almacenamiento, configuración y gestión simplificadas de almacenamiento y carpetas  
compartidas y compatibilidad con Microsoft iSCSI Software Target. Está específicamente  
ajustado para proporcionar un rendimiento óptimo para el almacenamiento en red. Windows  
Storage Server 2008 proporciona unas mejoras significativas en cuanto a gestión de  
almacenamiento y recursos compartidos, así como para la integración de los componentes y  
funciones de gestión de dispositivos de almacenamiento.  
Doc | V1 | 2010.09  
Manual del software  
Bosch Sicherheitssysteme GmbH  
 
1200 and 1400 Series iSCSI Disk Arrays  
Descripción del sistema | es  
31  
2
Descripción del sistema  
Con Microsoft iSCSI Software Target en Windows Storage Server 2008, puede crear y  
gestionar destinos iSCSI, crear y gestionar discos virtuales para almacenamiento e  
implementar soporte de copias de seguridad y recuperaciones mediante el uso de capturas.  
Nota  
Microsoft iSCSI Software Target está preinstalado y preconfigurado en todos los modelos  
DLA de Bosch. Si no está instalado o no se proporciona junto a su dispositivo de  
almacenamiento, póngase en contacto con el fabricante del dispositivo para obtener  
información sobre cómo adquirir Microsoft iSCSI Software Target.  
2.1  
Descripción de iSCSI  
Existen varios protocolos, como ATA (SATA) y SCSI (SAS), que permiten que un controlador  
de discos se comunique con las unidades de disco. Estos protocolos son estándares  
predefinidos que determinan la forma en que los comandos, como las solicitudes de lectura y  
escritura, se empaquetan y envían entre el controlador y la unidad de disco. El protocolo  
iSCSI mejora los estándares de SCSI, al encapsular los comandos SCSI dentro de paquetes  
TCP/IP. Estos comandos se envían a través de una red TCP/IP, lo que permite a los servidores  
tener acceso al almacenamiento mediante una red SAN (red de área de almacenamiento). Eso  
facilita la implementación y la gestión centralizadas del almacenamiento consolidado, copia  
de seguridad centralizada y recuperación remota del sistema incluidas.  
2.1.1  
Componentes de red iSCSI  
En una red iSCSI, existen tres componentes:  
Destino iSCSI  
El destino iSCSI proporciona un almacenamiento similar al de las unidades de disco del  
almacenamiento conectado en local, pero el acceso se realiza a través de una red, en vez de  
localmente. Esta función se ofrece en Windows Storage Server 2008 a través de Microsoft  
iSCSI Software Target.  
Iniciador iSCSI  
Al iniciador iSCSI se le suele llamar «el cliente». El destino iSCSI proporciona el  
almacenamiento para el iniciador iSCSI, que hace las veces de controlador de discos para los  
discos alojados en el destino.  
Estructura del almacenamiento  
Se trata de una red basada en el Protocolo de Internet (IP), que conecta los destinos iSCSI al  
iniciador iSCSI. La estructura de almacenamiento suele constar de una red de área local  
(LAN) Gigabit.  
2.1.2  
Componentes de Microsoft iSCSI Software Target  
El paquete Microsoft iSCSI Software Target consta de estos tres componentes:  
Microsoft iSCSI Software Target: este componente permite crear y gestionar discos  
virtuales, crear y gestionar destinos iSCSI y realizar copias de seguridad y recuperaciones  
de los destinos iSCSI a través de capturas.  
Volume Shadow Copy Service (VSS) Hardware Provider: se instala en el equipo  
iniciador y funciona con el servicio VSS para proporcionar capturas coherentes de la  
aplicación de los discos virtuales iSCSI en el equipo sobre el que se ejecuta Microsoft  
iSCSI Software Target.  
Virtual Disk Service (VDS) Hardware Provider: se instala en un equipo iniciador y  
permite que las aplicaciones compatibles con VDS gestionen los discos virtuales de un  
dispositivo de almacenamiento en el que se ejecute Microsoft iSCSI Software Target.  
Bosch Sicherheitssysteme GmbH  
Manual del software  
Doc | V1 | 2010.09  
       
32 es | Descripción del sistema  
1200 and 1400 Series iSCSI Disk Arrays  
Nota  
El software Microsoft iSCSI Initiator no puede conectarse a un Microsoft iSCSI Software  
Target que se ejecute en el mismo ordenador. Los arrays de discos iSCSI de Bosch basados  
en Microsoft Windows Storage Server 2008 utilizan exclusivamente la función de destino  
iSCSI. Las soluciones de almacenamiento «todo en uno» de Bosch que ejecutan una  
aplicación Bosch en el array de almacenamiento proporcionan su propio iniciador iSCSI, que  
se puede conectar al mismo destino.  
Doc | V1 | 2010.09  
Manual del software  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Configuración del sistema | es  
33  
3
Configuración del sistema  
En este capítulo se facilita información sobre cómo preparar el dispositivo iSCSI antes de  
utilizarlo. Estas tareas ya se han realizado sobre el dispositivo iSCSI que acaba de adquirir, ya  
que todos los arrays de discos DLA de Bosch se entregan preinstalados y preconfigurados. No  
obstante, si cambia discos duros que no contaban con protección RAID en un dispositivo  
iSCSI, tendrá que volver a realizar algunas de las siguientes tareas de configuración.  
3.1  
3.2  
Desactivación de Windows Update  
Para desactivar Windows Update:  
1. Abra Server Manager.  
2. En la sección Security Information, haga clic en Configure Updates, Change Settings y,  
a continuación, haga clic para seleccionar Never check for updates.  
3. Haga clic en OK.  
Configuración del Firewall de Windows para iSCSI Software  
Target  
Deberá configurar el Firewall de Windows para que permita el paso del tráfico de red  
necesario. La siguiente tabla indica los puertos necesarios.  
Puerto o aplicación  
TCP 3260  
Descripción  
Microsoft iSCSI Software Target Service. Este puerto  
proporciona el acceso principal a Microsoft iSCSI Software  
Target.  
TCP 135  
UDP 138  
Llamada a procedimiento remoto (RPC); este puerto es  
necesario para la comunicación de modelo de objetos  
componentes (COM).  
NetBIOS Datagram Service; esta excepción ya debería  
existir para la función de servicios de archivo e impresión,  
pero puede que sea necesario agregarla de forma manual,  
si no está presente.  
%windir%\System32\Wintarg Microsoft iSCSI Software Target Service.  
et.exe  
%windir%\System32\WTStatu Proxy del estado de Microsoft iSCSI Software Target  
sProxy.exe  
Nota  
Cuando intente gestionar de forma remota un Microsoft iSCSI Software Target, puede que  
reciba un error de llamada a procedimiento remoto (RPC) si no configura primero la  
excepción del Firewall de Windows para WTStatusProxy.exe.  
La siguiente tabla contiene las excepciones de Firewall de Windows que debería establecer  
en el equipo iniciador de iSCSI.  
Excepción de aplicación  
Descripción  
%windir%\System32\Wtvds.exe  
Microsoft iSCSI Software Target VDS Hardware  
Provider  
Bosch Sicherheitssysteme GmbH  
Manual del software  
Doc | V1 | 2010.09  
     
34 es | Configuración del sistema  
1200 and 1400 Series iSCSI Disk Arrays  
Para agregar una regla de filtro de entrada para un programa:  
1. Abra el Firewall de Windows con seguridad avanzada. En Administrador de servidores,  
expanda Configuración, Firewall de Windows con seguridad avanzada y, a  
continuación, haga clic en Reglas de entrada.  
2. En el panel Acciones, haga clic en Nueva regla.  
3. En ¿Qué tipo de regla desea crear?, haga clic en Programa y, a continuación, haga clic  
en Siguiente.  
4. Haga clic en Examinar, diríjase hasta la carpeta %windir%\System32y, a continuación,  
haga clic en Wintarget.exe. Haga clic en Abrir y, a continuación, en Siguiente.  
5. Haga clic en Permitir la conexión y, a continuación, haga clic en Siguiente.  
6. Seleccione las ubicaciones de red que deberían ir vinculadas a esta regla (las opciones  
predeterminadas son Dominio, Privada y Pública). Haga clic en Siguiente.  
7. En Nombre, escriba un nombre descriptivo para la regla. Por ejemplo, escriba Microsoft  
iSCSI Software Target Service para la regla de programa de Wintarget.exe. Haga clic en  
Finalizar.  
Para agregar una regla de filtro de entrada para un puerto:  
1. Abra el Firewall de Windows con seguridad avanzada. En Administrador de servidores,  
expanda Configuración, Firewall de Windows con seguridad avanzada y, a  
continuación, haga clic en Reglas de entrada.  
2. En el panel Acciones, haga clic en Nueva regla.  
3. En ¿Qué tipo de regla desea crear?, haga clic en Puerto y, a continuación, haga clic en  
Siguiente.  
4. Seleccione el protocolo correspondiente a esta regla (TCP o UDP). En ¿Se aplica esta  
regla a todos los puertos locales o a unos puertos locales específicos?, haga clic en  
Puertos locales específicos y escriba el número de puerto correspondiente.  
5. Haga clic en Permitir la conexión y, a continuación, haga clic en Siguiente.  
6. Seleccione las ubicaciones de red que deberían ir vinculadas a esta regla (las opciones  
predeterminadas son Dominio, Privada y Pública). Haga clic en Siguiente.  
7. En Nombre, escriba un nombre descriptivo para la regla. Por ejemplo, escriba Llamada a  
procedimiento remoto para la comunicación RPC en el puerto TPC 135. Haga clic en  
Finalizar.  
Para configurar los ajustes del Firewall de Windows desde la línea de comandos con el  
siguiente procedimiento de muestra:  
1. netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-TCP-3260" dir=in action=allow protocol=TCP  
localport=3260netsh advfirewall firewall add rule name="Microsoft iSCSI  
Software Target Service-TCP-135" dir=in action=allow protocol=TCP  
localport=135  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-UDP-138" dir=in action=allow protocol=UDP localport=138  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service" dir=in action=allow  
program="%SystemRoot%\System32\WinTarget.exe" enable=yesnetsh  
advfirewall firewall add rule name="Microsoft iSCSI Software Target  
Service Status Proxy" dir=in action=allow  
program="%SystemRoot%\System32\WTStatusProxy.exe" enable=yes  
Doc | V1 | 2010.09  
Manual del software  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Configuración de destinos iSCSI | es  
35  
4
Configuración de destinos iSCSI  
Los discos que se crean mediante iSCSI Software Target son discos virtuales iSCSI que son  
archivos en el formato de disco duro virtual fijo.  
Para configurar los destinos iSCSI, deberá realizar las siguientes tareas:  
4.1  
Creación de un destino iSCSI  
1. Haga clic en Inicio y haga clic en Administrador de servidores.  
2. Expanda Almacenamiento, Microsoft iSCSI Software Target y, a continuación, haga clic  
en Destinos iSCSI.  
3. Haga clic con el botón derecho del ratón en Destinos iSCSI y haga clic en Crear destino  
iSCSI.  
Aparecerá el cuadro de diálogo del Asistente para crear destino iSCSI.  
4. Haga clic en Siguiente>.  
5. En el campo Nombre de destino iSCSI, escriba el nombre deseado.  
Escriba una descripción del nuevo destino iSCSI, si lo desea.  
Haga clic en Siguiente>.  
6. En el campo Identificador IQN, escriba *.  
Bosch Sicherheitssysteme GmbH  
Manual del software  
Doc | V1 | 2010.09  
     
36 es | Configuración de destinos iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
7. Haga clic en Siguiente>.  
8. Haga clic en Finalizar.  
El destino iSCSI se agrega a la lista Destinos iSCSI del Administrador de servidores.  
Nota: sólo es necesario crear un destino iSCSI, ya que todos los LUN (números de unidad  
lógica) deberán ponerse en una configuración de destino.  
4.2  
Creación de un volumen simple  
1. Inicie Administrador de servidores.  
2. Expanda Almacenamiento y, a continuación, haga clic en Administración de discos.  
Doc | V1 | 2010.09  
Manual del software  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Configuración de destinos iSCSI | es  
37  
3. Haga clic con el botón derecho del ratón sobre Disco 1 y haga clic en En línea.  
4. Haga clic con el botón derecho del ratón sobre el espacio sin asignar del disco dinámico  
en el que desee crear el volumen simple, y a continuación haga clic en Nuevo volumen  
simple.  
5. En el Asistente para nuevo volumen simple, haga clic en Siguiente>.  
6. En el cuadro de diálogo Especificar el tamaño del volumen, deje la configuración  
predeterminada sin cambios y haga clic en Siguiente>.  
7. En el cuadro de diálogo Asignar letra de unidad o ruta de acceso, introduzca la letra que  
desea asignar a la unidad de disco y haga clic en Siguiente>.  
8. En el cuadro de diálogo Formatear la partición, haga clic para seleccionar la opción  
Formatear este volumen con la configuración siguiente:.  
En la lista Sistema de archivos, seleccione NTFS.  
En la lista Tamaño de unidad de asignación, seleccione 64 KB.  
En el campo Etiqueta de volumen, escriba una descripción para el nuevo volumen.  
Haga clic para seleccionar Dar formato rápido.  
Haga clic en Siguiente>.  
Aparecerá el cuadro de diálogo final del Asistente para nuevo volumen simple.  
Bosch Sicherheitssysteme GmbH  
Manual del software  
Doc | V1 | 2010.09  
38 es | Configuración de destinos iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
9. Compruebe la configuración y haga clic en Finalizar.  
4.3  
Creación de un disco virtual  
1. Inicie Administrador de servidores.  
2. Expanda Almacenamiento, Microsoft iSCSI Software Target, expanda Destinos iSCSI y,  
a continuación, haga clic con el botón derecho del ratón al destino iSCSI que ya ha  
agregado.  
3. Haga clic en Crear disco virtual para destino iSCSI.  
4. En el Asistente para crear disco virtual, haga clic en Siguiente>.  
Doc | V1 | 2010.09  
Manual del software  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Configuración de destinos iSCSI | es  
39  
5. En el cuadro de diálogo Archivo, escriba un nombre de archivo completo. Asegúrese de  
utilizar también la extensión .vhd.  
6. Haga clic en Siguiente>.  
7. En el cuadro de diálogo Tamaño, escriba el tamaño del nuevo disco virtual, expresado en  
MB. Para el valor máximo, escriba el valor del campo Espacio libre actualmente  
disponible:, multiplicado por 1024.  
Nota:  
El tamaño del archivo .vhdes igual al tamaño del LUN, y no puede superar los 2 TB, ya  
que el firmware BVIP es compatible con un tamaño de LUN máximo de 2 TB.  
8. Haga clic en Siguiente>.  
Se ha creado el disco virtual.  
Mediante el procedimiento descrito en este capítulo, podrá agregar tantos discos  
adicionales como desee, hasta que se haya agotado la capacidad del disco duro físico.  
El array de discos está ahora configurado correctamente y puede utilizarlo para las  
respectivas aplicaciones iSCSI.  
4.4  
Modificación de la configuración de LUN de iSCSI  
Cuando tenga que cambiar la configuración de LUN, primero deberá eliminar los LUN y volver  
a configurarlos después.  
Para eliminar un LUN:  
1. Inicie Administrador de servidores.  
Bosch Sicherheitssysteme GmbH  
Manual del software  
Doc | V1 | 2010.09  
   
40 es | Configuración de destinos iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
2. Haga clic con el botón derecho del ratón en el disco virtual (=LUN) y haga clic en Eliminar  
disco virtual.  
3. Haga clic en para confirmar el mensaje de advertencia que aparecerá a continuación.  
4. Para liberar realmente la capacidad, elimine manualmente el archivo .vhddesde el  
Explorador de Windows.  
Ahora puede reconfigurar los números de unidad lógica según se indica en las secciones  
4.1 - 4.3 .  
Doc | V1 | 2010.09  
Manual del software  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Table des matières | fr  
41  
Table des matières  
Informations essentielles  
Présentation du système  
Présentation de la technologie iSCSI  
Composants d'un réseau iSCSI  
Composants de Microsoft iSCSI Software Target  
Configuration du système  
Désactivation de Windows Update  
Configuration du pare-feu Windows pour iSCSI Software Target  
Configuration des cibles iSCSI  
Création d'une cible iSCSI  
Création d'un volume simple  
Création d'un disque virtuel  
Modifications des paramètres LUN iSCSI  
Bosch Sicherheitssysteme GmbH  
Manuel du logiciel  
Doc | V1 | 2010.09  
 
42 fr | Informations essentielles  
1200 and 1400 Series iSCSI Disk Arrays  
1
Informations essentielles  
L'adresse IP par défaut du périphérique est 10.10.10.10 sur le premier port.  
Toutes les unités de disques de la série DLA de Bosch sont préconfigurées à l'aide d'une  
adresse IP et de paramètres iSCSI par défaut.  
Les paramètres iSCSI par défaut sont optimisés pour une utilisation avec VRM. Seul un  
administrateur de stockage expérimenté est autorisé modifier ces paramètres. La procédure  
de configuration ci-dessous n'est requise que si vous n'utilisez pas VRM ou si les paramètres  
par défaut ne sont pas appropriés à l'utilisation d'une autre application iSCSI de Bosch.  
Le système d'exploitation Microsoft Windows Storage Server 2008 offre une interface  
utilisateur unique pour la configuration initiale du serveur, la gestion unifiée des dispositifs de  
stockage, la configuration et la gestion simplifiées des dossiers de partage et de stockage et  
la prise en charge de Microsoft iSCSI Software Target. Il est spécialement configuré pour  
permettre aux systèmes de stockage en réseau d'atteindre des performances optimales.  
Windows Storage Server 2008 apporte des améliorations considérables en termes de gestion  
du stockage et du partage, mais aussi en termes d'intégration des composants et des  
fonctionnalités de gestion des dispositifs de stockage.  
Doc | V1 | 2010.09  
Manuel du logiciel  
Bosch Sicherheitssysteme GmbH  
 
1200 and 1400 Series iSCSI Disk Arrays  
Présentation du système | fr  
43  
2
Présentation du système  
Grâce au logiciel Microsoft iSCSI Software Target intégré à Windows Storage Server 2008,  
vous pouvez créer et gérer des cibles iSCSI, créer et gérer des disques de stockage virtuels et  
mettre en œuvre des fonctions de sauvegarde et de restauration à l'aide d'instantanés.  
Remarque  
Le logiciel Microsoft iSCSI Software Target est préinstallé et préconfiguré sur tous les  
modèles DLA de Bosch. S'il n'est pas installé ou fourni avec votre dispositif de stockage,  
contactez son fabricant pour savoir comment vous procurer Microsoft iSCSI Software Target.  
2.1  
Présentation de la technologie iSCSI  
Plusieurs protocoles, comme ATA (SATA) et SCSI (SAS), permettent la communication entre  
un contrôleur de disques et des disques durs. Ces protocoles correspondent à des normes  
établies qui déterminent la manière dont les commandes, telles que les requêtes de lecture et  
d'écriture, sont groupées et envoyées du contrôleur aux disques durs. Le protocole iSCSI se  
montre plus abouti que la norme SCSI en encapsulant les commandes SCSI dans des  
paquets TCP/IP. Ces commandes sont transmises via un réseau TCP/IP, ce qui permet aux  
serveurs d'accéder aux ressources de stockage d'un réseau de stockage (SAN). Il est ainsi  
plus facile de mettre en œuvre et de gérer de manière centralisée une solution de stockage  
consolidée, y compris la sauvegarde centralisée et la restauration de systèmes distants.  
2.1.1  
Composants d'un réseau iSCSI  
Un réseau iSCSI comporte trois composants :  
Cible iSCSI  
La cible iSCSI constitue une ressource de stockage similaire aux disques durs utilisés pour un  
stockage local, mais à laquelle vous accédez via un réseau. Cette fonctionnalité est fournie  
sous Windows Storage Server 2008 par le logiciel Microsoft iSCSI Software Target.  
Initiateur iSCSI  
L'initiateur iSCSI est souvent désigné en tant que client. La cible iSCSI fournit les ressources  
de stockage à l'initiateur iSCSI, qui sert de contrôleur de disque aux disques durs hébergés  
par la cible.  
Réseau de stockage  
Il s'agit d'un réseau IP (protocole Internet) qui connecte la cible iSCSI à l'initiateur iSCSI. Le  
réseau de stockage est en général un réseau local (LAN) Gigabit.  
2.1.2  
Composants de Microsoft iSCSI Software Target  
La solution Microsoft iSCSI Software Target comporte trois composants :  
Microsoft iSCSI Software Target : ce composant vous permet de créer et de gérer des  
disques virtuels, de créer et de gérer des cibles iSCSI et de sauvegarder et de restaurer  
les cibles iSCSI à l'aide d'instantanés.  
Fournisseur de matériel VSS (Volume Shadow Copy Service) : installé sur l'ordinateur  
initiateur, le fournisseur de matériel VSS utilise le service VSS pour fournir des  
instantanés cohérents d'une application à l'autre des disques virtuels iSCSI de  
l'ordinateur qui exécute Microsoft iSCSI Software Target.  
Fournisseur de matériel VDS (Virtual Disk Service) : installé sur un ordinateur initiateur,  
le fournisseur de matériel VDS permet aux applications compatibles VDS de gérer les  
disques virtuels d'un dispositif de stockage exécutant Microsoft iSCSI Software Target.  
Bosch Sicherheitssysteme GmbH  
Manuel du logiciel  
Doc | V1 | 2010.09  
       
44 fr | Présentation du système  
1200 and 1400 Series iSCSI Disk Arrays  
Remarque  
Un initiateur Microsoft iSCSI ne peut pas se connecter à une cible Microsoft  
iSCSI Software Target exécutée sur le même ordinateur. Les unités de disques durs iSCSI de  
Bosch utilisés sous Microsoft Windows Storage Server 2008 fonctionnent uniquement avec la  
fonctionnalité de cible iSCSI. Les solutions de stockage tout-en-un de Bosch exécutant une  
application Bosch sur l'unité de stockage possèdent leur propre initiateur iSCSI, capable de  
se connecter à la même cible.  
Doc | V1 | 2010.09  
Manuel du logiciel  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Configuration du système | fr  
45  
3
Configuration du système  
Ce chapitre explique comment préparer le périphérique iSCSI avant de l'utiliser. Ces tâches  
ont déjà été effectuées sur le périphérique iSCSI que vous venez d'acheter, puisque toutes les  
unités de disques durs DLA de Bosch sont préconfigurées et les logiciels nécessaires  
préinstallés. Cependant, si vous remplacez des disques durs sans protection RAID sur un  
périphérique iSCSI, vous devez effectuer à nouveau certaines de ces tâches de configuration.  
3.1  
3.2  
Désactivation de Windows Update  
Pour désactiver Windows Update :  
1. Ouvrez Server Manager.  
2. Dans la section Security Information, cliquez sur Configure Updates, cliquez sur Change  
Settings, puis cochez la case Never check for updates.  
3. Cliquez sur OK.  
Configuration du pare-feu Windows pour iSCSI Software Target  
Vous devez configurer le pare-feu Windows de manière à permettre le transfert des données  
nécessaires via le réseau. Le tableau suivant répertorie les ports devant être configurés.  
Port ou application  
TCP 3260  
Description  
Service Microsoft iSCSI Software Target. Ce port permet  
l'accès principal à la cible Microsoft iSCSI Software Target.  
TCP 135  
UDP 138  
RPC (Remote Procedure Call). Ce port est nécessaire à la  
communication COM (Component Object Model).  
Service de datagramme NetBIOS. Cette exception existe  
en général déjà (pour le service Classer et imprimer) ; dans  
le cas contraire, il est nécessaire de l'ajouter  
manuellement.  
%windir%\System32\Wintarg Service Microsoft iSCSI Software Target  
et.exe  
%windir%\System32\WTStatu Proxy d'état de Microsoft iSCSI Software Target  
sProxy.exe  
Remarque  
Si vous ne configurez pas d'exception du pare-feu Windows pour WTStatusProxy.exe, vous  
risquez de recevoir un message d'erreur RPC lorsque vous tenterez de gérer une cible  
Microsoft iSCSI Software Target à distance.  
Le tableau suivant répertorie les exceptions devant être créées dans le pare-feu Windows de  
l'ordinateur initiateur iSCSI.  
Exception d'application  
Description  
%windir%\System32\Wtvds.exe  
Fournisseur de matériel VDS de la cible Microsoft  
iSCSI Software Target  
Pour ajouter une règle de filtrage des données entrantes d'un programme :  
1. Ouvrez les fonctions avancées de sécurité du pare-feu Windows. Dans Gestionnaire de  
serveur, développez Configuration, développez Pare-feu Windows avec fonctions  
avancées de sécurité, puis cliquez sur Règles de trafic entrant.  
2. Dans le volet Actions, cliquez sur Nouvelle règle.  
Bosch Sicherheitssysteme GmbH  
Manuel du logiciel  
Doc | V1 | 2010.09  
     
46 fr | Configuration du système  
1200 and 1400 Series iSCSI Disk Arrays  
3. Sous Quel type de règle voulez-vous créer ?, cliquez sur Programme, puis cliquez sur  
Suivant.  
4. Cliquez sur Parcourir, naviguez jusqu'au dossier %windir%\System32, puis cliquez sur  
Wintarget.exe. Cliquez sur Ouvrir, puis cliquez sur Suivant.  
5. Cliquez sur Autoriser la connexion, puis cliquez sur Suivant.  
6. Sélectionnez les emplacements réseau auxquels s'applique cette règle (Domaine, Privé et  
Public par défaut). Cliquez sur Suivant.  
7. Sous Nom, donnez un nom descriptif à la règle. Par exemple, saisissez Service Microsoft  
iSCSI Software Target pour la règle correspondant au programme Wintarget.exe.  
Cliquez sur Terminer.  
Pour ajouter une règle de filtrage sur un port :  
1. Ouvrez les fonctions avancées de sécurité du pare-feu Windows. Dans Gestionnaire de  
serveur, développez Configuration, développez Pare-feu Windows avec fonctions  
avancées de sécurité, puis cliquez sur Règles de trafic entrant.  
2. Dans le volet Actions, cliquez sur Nouvelle règle.  
3. Sous Quel type de règle voulez-vous créer, cliquez sur Port, puis cliquez sur Suivant.  
4. Sélectionnez le protocole approprié pour cette règle (TCP ou UDP). Sous Cette règle  
s'applique-t-elle à tous les ports locaux ou à des ports locaux spécifiques ?, cliquez sur  
Ports locaux spécifiques, puis saisissez le numéro du port concerné.  
5. Cliquez sur Autoriser la connexion, puis cliquez sur Suivant.  
6. Sélectionnez les emplacements réseau auxquels s'applique cette règle (Domaine, Privé et  
Public par défaut). Cliquez sur Suivant.  
7. Sous Nom, donnez un nom descriptif à la règle. Par exemple, saisissez RPC pour les  
communications RPC sur le port TCP 135. Cliquez sur Terminer.  
Pour configurer les paramètres du pare-feu Windows à partir d'une ligne de commande à  
l'aide du script suivant :  
1. netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-TCP-3260" dir=in action=allow protocol=TCP  
localport=3260netsh advfirewall firewall add rule name="Microsoft iSCSI  
Software Target Service-TCP-135" dir=in action=allow protocol=TCP  
localport=135  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-UDP-138" dir=in action=allow protocol=UDP localport=138  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service" dir=in action=allow  
program="%SystemRoot%\System32\WinTarget.exe" enable=yesnetsh  
advfirewall firewall add rule name="Microsoft iSCSI Software Target  
Service Status Proxy" dir=in action=allow  
program="%SystemRoot%\System32\WTStatusProxy.exe" enable=yes  
Doc | V1 | 2010.09  
Manuel du logiciel  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Configuration des cibles iSCSI | fr  
47  
4
Configuration des cibles iSCSI  
Les disques que vous créez à l'aide du logiciel iSCSI Software Target sont des disques  
virtuels iSCSI, c'est-à-dire des fichiers au format VHD (disque dur virtuel fixe).  
Pour configurer les cibles iSCSI, procédez comme suit :  
4.1  
Création d'une cible iSCSI  
1. Cliquez sur Démarrer, puis cliquez sur Gestionnaire de serveur.  
2. Développez Stockage, développez Microsoft iSCSI Software Target, puis cliquez sur  
Cibles iSCSI.  
3. Cliquez avec le bouton droit de la souris sur Cibles iSCSI, puis cliquez sur Créer une  
cible iSCSI.  
La boîte de dialogue Assistant Création d'une cible iSCSI s'affiche.  
4. Cliquez sur Suivant>.  
5. Dans le champ Nom de la cible iSCSI, saisissez le nom de votre choix.  
Vous pouvez également saisir une description de la nouvelle cible iSCSI.  
Cliquez sur Suivant>.  
6. Dans le champ Identifiant IQN, saisissez *.  
Bosch Sicherheitssysteme GmbH  
Manuel du logiciel  
Doc | V1 | 2010.09  
     
48 fr | Configuration des cibles iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
7. Cliquez sur Suivant>.  
8. Cliquez sur Terminer.  
La cible iSCSI est ajoutée à la liste Cibles iSCSI du gestionnaire de serveur.  
Remarque : il suffit de créer une seule cible iSCSI, puisque tous les LUN doivent être  
rassemblés sur une seule et même configuration cible.  
4.2  
Création d'un volume simple  
1. Démarrez le Gestionnaire de serveur.  
2. Développez Stockage, puis cliquez sur Gestion des disques.  
Doc | V1 | 2010.09  
Manuel du logiciel  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Configuration des cibles iSCSI | fr  
49  
3. Cliquez avec le bouton droit de la souris sur Disque 1, puis cliquez sur En ligne.  
4. Cliquez avec le bouton droit de la souris sur l'espace libre du disque dynamique sur  
lequel vous souhaitez créer le volume simple, puis cliquez sur Nouveau volume simple.  
5. Dans l'Assistant Création d'un volume simple, cliquez sur Suivant>.  
6. Dans la boîte de dialogue Spécifier la taille du volume, conservez les paramètres par  
défaut, puis cliquez sur Suivant>.  
7. Dans la boîte de dialogue Attribuer une lettre de lecteur ou de chemin d'accès, indiquez  
la lettre de volume de votre choix, puis cliquez sur Suivant>.  
8. Dans la boîte de dialogue Formater une partition, cochez la case Formater ce volume  
avec les paramètres suivants.  
Dans la liste Système de fichiers, sélectionnez NTFS.  
Dans la liste Taille d'unité d'allocation, sélectionnez 64K.  
Dans le champ Nom de volume, saisissez une description du nouveau volume.  
Cochez la case Effectuer un formatage rapide.  
Cliquez sur Suivant>.  
La dernière boîte de dialogue de l'Assistant Création d'un volume simple s'affiche.  
Bosch Sicherheitssysteme GmbH  
Manuel du logiciel  
Doc | V1 | 2010.09  
50 fr | Configuration des cibles iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
9. Vérifiez que les paramètres sont exacts, puis cliquez sur Terminer.  
4.3  
Création d'un disque virtuel  
1. Démarrez le Gestionnaire de serveur.  
2. Développez Stockage, développez Microsoft iSCSI Software Target, développez  
Cibles iSCSI, puis cliquez avec le bouton droit de la souris sur la cible iSCSI que vous  
avez ajoutée.  
3. Cliquez sur Créer un disque virtuel pour la cible iSCSI.  
4. Dans l'Assistant Création d'un disque virtuel, cliquez sur Suivant>.  
Doc | V1 | 2010.09  
Manuel du logiciel  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Configuration des cibles iSCSI | fr  
51  
5. Dans la boîte de dialogue Fichier, saisissez un nom de fichier complet. Ajoutez  
l'extension .vhd.  
6. Cliquez sur Suivant>.  
7. Dans la boîte de dialogue Taille, saisissez la taille du nouveau disque virtuel en Mo. Pour  
la valeur maximale, saisissez la valeur du champ Espace libre disponible actuel en la  
multipliant par 1 024.  
Remarque :  
La taille du fichier .vhdest égale à la taille du LUN et ne peut dépasser 2 To, car le  
firmware BVIP prend uniquement en charge les LUN d'une taille de 2 To maximum.  
8. Cliquez sur Suivant>.  
Le disque virtuel est créé.  
La procédure décrite dans ce chapitre vous permet d'ajouter autant de disques que vous  
le souhaitez dans la limite de l'espace disponible sur le disque dur.  
La configuration de l'unité de disques durs étant terminée, vous pouvez désormais  
l'utiliser pour les applications iSCSI appropriées.  
4.4  
Modifications des paramètres LUN iSCSI  
Lorsque vous devez modifier vos paramètres LUN, vous devez commencer par supprimer les  
LUN et les configurer de nouveau.  
Pour supprimer un LUN :  
1. Démarrez le Gestionnaire de serveur.  
Bosch Sicherheitssysteme GmbH  
Manuel du logiciel  
Doc | V1 | 2010.09  
   
52 fr | Configuration des cibles iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
2. Cliquez avec le bouton droit de la souris sur le disque virtuel (LUN), puis cliquez sur  
Supprimer le disque virtuel.  
3. Cliquez sur Oui pour confirmer la lecture de l'avertissement suivant.  
4. Pour réellement libérer la capacité de stockage, supprimez manuellement le fichier .vhd  
à l'aide de l'Explorateur Windows.  
Vous pouvez à présent reconfigurer vos LUN comme indiqué dans les sections 4.1 - 4.3 .  
Doc | V1 | 2010.09  
Manuel du logiciel  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Sommario | it  
53  
Sommario  
Informazioni sintetiche  
Panoramica sistema  
Panoramica iSCSI  
Componenti di rete iSCSI  
Componenti di Destinazione Software iSCSI Microsoft  
Configurazione del sistema  
Disattivazione di Windows Update  
Configurazione di Windows Firewall per Destinazione Software iSCSI  
Configurazione delle destinazioni iSCSI  
Creazione di una destinazione iSCSI  
Creazione di un volume semplice  
Creazione di un disco virtuale  
Modifica delle impostazioni LUN iSCSI  
Bosch Sicherheitssysteme GmbH  
Manuale del software  
Doc | V1 | 2010.09  
 
54 it | Informazioni sintetiche  
1200 and 1400 Series iSCSI Disk Arrays  
1
Informazioni sintetiche  
L'indirizzo IP predefinito del dispositivo è: 10.10.10.10 sulla prima porta  
Tutti i dischi array Bosch della serie DLA sono preconfigurati con un indirizzo IP predefinito e  
impostazioni iSCSI predefinite.  
Le impostazioni iSCSI predefinite sono ottimizzate per l'uso con VRM. Tali impostazioni  
devono essere modificate solo da amministratori esperti addetti all'archiviazione. Le seguenti  
fasi relative alla configurazione sono necessarie solo se il VRM non è utilizzato oppure se le  
impostazioni predefinite non sono appropriate per un'altra applicazione iSCSI di Bosch.  
I sistemi operativi di Microsoft Windows Storage Server 2008 offrono un'interfaccia utente  
per la configurazione iniziale del server, gestione unificata dei dispositivi di archiviazione,  
semplice configurazione e gestione di cartelle condivise e archiviazione, nonché il supporto di  
Destinazione Software iSCSI Microsoft. Ciò rappresenta la soluzione ideale per fornire  
prestazioni ottimali per l'archiviazione con connessione in rete. Windows Storage Server 2008  
offre notevoli miglioramenti relativi alla gestione di condivisione e archiviazione, nonché  
l'integrazione di funzionalità e componenti per la gestione dei dispositivi di archiviazione.  
Doc | V1 | 2010.09  
Manuale del software  
Bosch Sicherheitssysteme GmbH  
 
1200 and 1400 Series iSCSI Disk Arrays  
Panoramica sistema | it  
55  
2
Panoramica sistema  
Grazie a Destinazione Software iSCSI Microsoft in Windows Storage Server 2008 è possibile  
creare e gestire destinazioni iSCSI, creare e gestire dischi virtuali per l'archiviazione, nonché  
implementare il supporto di backup e ripristino tramite l'utilizzo di istantanee.  
Nota  
Destinazione Software iSCSI Microsoft è preinstallato e preconfigurato in tutti i modelli DLA  
di Bosch. Nel caso in cui non risulti installato o fornito insieme al dispositivo di archiviazione,  
contattare il produttore del dispositivo stesso per informazioni su come ottenere  
Destinazione Software iSCSI Microsoft.  
2.1  
Panoramica iSCSI  
Diversi protocolli, come ATA (SATA) e SCSI (SAS), sono disponibili per abilitare la  
comunicazione di un controller dischi con le unità disco rigido. Tali protocolli rappresentano  
standard predefiniti che stabiliscono le modalità relative ai pacchetti e all'invio di comandi,  
come le richieste di lettura e scrittura, tra il controller e l'unità disco rigido. Il protocollo iSCSI  
estende gli standard SCSI incapsulando i comandi SCSI in pacchetti TCP/IP. Tali comandi  
vengono inviati tramite una rete TCP/IP, che consente ai server di accedere all'archiviazione  
nelle reti SAN (Storage Area Network). Ciò semplifica l'implementazione e la gestione  
centralizzata di archiviazione consolidata, inclusi il backup centralizzato e il ripristino del  
sistema in remoto.  
2.1.1  
Componenti di rete iSCSI  
Una rete iSCSI è formata da tre componenti:  
Destinazione iSCSI  
La destinazione iSCSI fornisce l'archiviazione, in modo simile alle unità disco rigido  
dell'archiviazione collegata a livello locale, ma con accesso tramite una rete invece che locale.  
Questa funzionalità viene fornita in Windows Storage Server 2008 tramite Destinazione  
Software iSCSI Microsoft.  
Iniziatore iSCSI  
A volte ci si riferisce all'iniziatore iSCSI come il client. La destinazione iSCSI fornisce  
l'archiviazione all'iniziatore iSCSI, il quale funge da controller dischi per i dischi presenti nella  
destinazione.  
Struttura dell'archiviazione  
Si tratta di una rete basata su protocollo Internet (IP) che collega la destinazione iSCSI  
all'iniziatore iSCSI. La struttura dell'archiviazione è di solito una rete LAN (Local Area  
Network) Gigabit.  
2.1.2  
Componenti di Destinazione Software iSCSI Microsoft  
Il pacchetto Destinazione Software iSCSI Microsoft comprende tre componenti:  
Destinazione Software iSCSI Microsoft – Questo componente consente di creare e  
gestire dischi virtuali, creare e gestire destinazioni iSCSI nonché fornire il backup e il  
ripristino di destinazioni iSCSI tramite l'utilizzo di istantanee.  
Provider hardware Servizio Copia Shadow del volume (VSS) – Il componente Provider  
hardware VSS è installato sul computer iniziatore e funziona con il servizio VSS per  
fornire nell'applicazione istantanee costanti dei dischi virtuali iSCSI sul computer che  
esegue Destinazione Software iSCSI Microsoft.  
Provider hardware Servizio dischi virtuali (VDS) – Il componente Provider hardware  
VDS è installato sul computer iniziatore e consente alle applicazioni che riconoscono VDS  
Bosch Sicherheitssysteme GmbH  
Manuale del software  
Doc | V1 | 2010.09  
       
56 it | Panoramica sistema  
1200 and 1400 Series iSCSI Disk Arrays  
di gestire i dischi virtuali su un dispositivo di archiviazione che esegue Destinazione  
Software iSCSI Microsoft.  
Nota  
L'iniziatore Microsoft iSCSI non può collegarsi a Destinazione Software iSCSI Microsoft in  
esecuzione sullo stesso computer. I disk array iSCSI di Bosch basati su Microsoft Windows  
Storage Server 2008 utilizzano soltanto la funzionalità di destinazione iSCSI. Le soluzioni di  
archiviazione all-in-one di Bosch che eseguono un'applicazione Bosch su un array di  
archiviazione forniscono il proprio iniziatore iSCSI che può collegarsi alla stessa destinazione.  
Doc | V1 | 2010.09  
Manuale del software  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Configurazione del sistema | it  
57  
3
Configurazione del sistema  
Questo capitolo contiene informazioni sulla preparazione del dispositivo iSCSI prima dell'uso.  
Su un dispositivo iSCSI appena acquistato, tali operazioni sono già state eseguite in quanto  
tutti i disk array DLA di Bosch vengono forniti preinstallati e preconfigurati. Tuttavia, se si  
sostituiscono dischi rigidi non dotati di protezione RAID su un dispositivo iSCSI, è necessario  
eseguire nuovamente alcune delle operazioni di configurazione.  
3.1  
3.2  
Disattivazione di Windows Update  
Per disattivare Windows Update:  
1. Aprire Server Manager.  
2. Nella sezione Security Information, fare clic su Configure Updates, fare clic su Change  
Settings e infine fare clic per selezionare Never check for updates.  
3. Fare clic su OK.  
Configurazione di Windows Firewall per Destinazione Software  
iSCSI  
È necessario configurare Windows Firewall per consentire il passaggio del traffico di rete  
necessario. Nella tabella di seguito sono elencate le porte richieste.  
Porta o applicazione  
TCP 3260  
Descrizione  
Servizio Destinazione Software iSCSI Microsoft. Questa  
porta fornisce l'accesso primario a Destinazione Software  
iSCSI Microsoft.  
TCP 135  
UDP 138  
Chiamata a procedura remota (RPC, Remote Procedure  
Call). Questa porta è richiesta per le comunicazioni COM  
(Component Object Model).  
Servizio datagrammi NetBIOS. Questa eccezione deve  
essere già presente per il ruolo del Servizio di gestione file  
e di stamp ma, in caso contrario, potrebbe essere  
necessario aggiungerla manualmente.  
%windir%\System32\Wintarg Servizio Destinazione Software iSCSI Microsoft  
et.exe  
%windir%\System32\WTStatu Proxy stato di Destinazione Software iSCSI Microsoft  
sProxy.exe  
Nota  
Quando si tenta di gestire in remoto Destinazione Software iSCSI Microsoft, è possibile  
ricevere errori RPC, se non è stata configurata l'eccezione di Windows Firewall per  
WTStatusProxy.exe.  
Nella tabella di seguito sono riportate le eccezioni di Windows Firewall da configurare sul  
computer iniziatore iSCSI.  
Eccezione applicazione  
Descrizione  
%windir%\System32\Wtvds.exe  
Provider hardware VDS di Destinazione Software  
iSCSI Microsoft  
Bosch Sicherheitssysteme GmbH  
Manuale del software  
Doc | V1 | 2010.09  
     
58 it | Configurazione del sistema  
1200 and 1400 Series iSCSI Disk Arrays  
Per aggiungere una regola filtro in entrata per un programma:  
1. Aprire Windows Firewall con protezione avanzata. In Server Manager, espandere  
Configurazione, espandere Windows Firewall con protezione avanzata, quindi fare clic  
su Regole in entrata.  
2. Nel riquadro Azioni, fare clic su Nuova regola.  
3. In Selezionare il tipo di regola che si desidera creare, fare clic su Programma, quindi  
fare clic su Avanti.  
4. Fare clic su Sfoglia, individuale la cartella %windir%\System32, quindi fare clic su  
Wintarget.exe. Fare clic su Apri, quindi fare clic su Avanti.  
5. Fare clic su Consenti la connessione, quindi fare clic su Avanti.  
6. Selezionare i percorsi di rete che devono essere inclusi in questa regola (l'impostazione  
predefinita è Dominio, Privata e Pubblica). Fare clic su Avanti.  
7. In Nome, digitare un nome descrittivo per la regola. Ad esempio, digitare Servizio  
Destinazione Software iSCSI Microsoft per la regola per programma di Wintarget.exe.  
Fare clic su Fine.  
Per aggiungere una regola filtro in entrata per una porta:  
1. Aprire Windows Firewall con protezione avanzata. In Server Manager, espandere  
Configurazione, espandere Windows Firewall con protezione avanzata, quindi fare clic  
su Regole in entrata.  
2. Nel riquadro Azioni, fare clic su Nuova regola.  
3. In Selezionare il tipo di regola che si desidera creare, fare clic su Porta, quindi fare clic  
su Avanti.  
4. Selezionare il protocollo per questa regola, TCP oppure UDP. In Selezionare se applicare  
la regola a tutte le porte locali o a porte locali specifiche, fare clic su Porte locali  
specifiche e digitare il numero di porta appropriato.  
5. Fare clic su Consenti la connessione, quindi fare clic su Avanti.  
6. Selezionare i percorsi di rete che devono essere inclusi in questa regola (l'impostazione  
predefinita è Dominio, Privata e Pubblica). Fare clic su Avanti.  
7. In Nome, digitare un nome descrittivo per la regola. Ad esempio, digitare Chiamata a  
procedura remota per la comunicazione RPC sulla porta TCP 135. Fare clic su Fine.  
Per configurare le impostazioni di Window Firewall dalla riga di comando con lo script di  
esempio riportato di seguito:  
1. netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-TCP-3260" dir=in action=allow protocol=TCP  
localport=3260netsh advfirewall firewall add rule name="Microsoft iSCSI  
Software Target Service-TCP-135" dir=in action=allow protocol=TCP  
localport=135  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-UDP-138" dir=in action=allow protocol=UDP localport=138  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service" dir=in action=allow  
program="%SystemRoot%\System32\WinTarget.exe" enable=yesnetsh  
advfirewall firewall add rule name="Microsoft iSCSI Software Target  
Service Status Proxy" dir=in action=allow  
program="%SystemRoot%\System32\WTStatusProxy.exe" enable=yes  
Doc | V1 | 2010.09  
Manuale del software  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Configurazione delle destinazioni iSCSI | it  
59  
4
Configurazione delle destinazioni iSCSI  
I dischi creati utilizzando Destinazione Software iSCSI sono dischi virtuali iSCSI, i quali sono  
file nel formato VHD (Virtual Hard Disk) fisso.  
Per configurare le destinazioni iSCSI, è necessario effettuare le seguenti operazioni:  
4.1  
Creazione di una destinazione iSCSI  
1. Fare clic su Start e quindi su Server Manager.  
2. Espandere Archiviazione, espandere DestinazioneSoftware iSCSI Microsoft, quindi fare  
clic su Destinazioni iSCSI.  
3. Fare clic con il pulsante destro del mouse su Destinazioni iSCSI, quindi fare clic su Crea  
destinazioni iSCSI.  
Viene visualizzata la finestra di dialogo di Creazione guidata destinazione iSCSI.  
4. Fare clic su Avanti>.  
5. Nel campo Nome destinazione iSCSI, digitare il nome che si desidera.  
Se si desidera, digitare una descrizione della nuova destinazione iSCSI.  
Fare clic su Avanti>.  
6. Nel campo Identificatore IQN, digitare *.  
Bosch Sicherheitssysteme GmbH  
Manuale del software  
Doc | V1 | 2010.09  
     
60 it | Configurazione delle destinazioni iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
7. Fare clic su Avanti>.  
8. Fare clic su Fine.  
La destinazione iSCSI viene aggiunta nell'elenco Destinazioni iSCSI di Server Manager.  
Nota: è necessario creare una sola destinazione iSCSI, in quanto tutti i LUN devono  
essere inclusi in una configurazione della destinazione.  
4.2  
Creazione di un volume semplice  
1. Avviare Server Manager.  
2. Espandere Archiviazione, quindi fare clic su Gestione disco.  
Doc | V1 | 2010.09  
Manuale del software  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Configurazione delle destinazioni iSCSI | it  
61  
3. Fare clic con il pulsante destro del mouse su Disco 1 e fare clic su Online.  
4. Fare clic con il pulsante destro del mouse sullo spazio non assegnato del disco dinamico  
sul quale si desidera creare il volume semplice, quindi fare clic su Nuovo volume  
semplice.  
5. In Creazione guidata nuovo volume semplice, fare clic su Avanti>.  
6. Nella finestra di dialogo Specifica dimensione volume, non modificare le impostazioni  
predefinite e fare clic su Avanti>.  
7. Nella finestra di dialogo Assegna lettera o percorso unità, immettere la lettera dell'unità  
desiderata e fare clic su Avanti>.  
8. Nella finestra di dialogo Formatta partizione, fare clic per selezionare Formatta questo  
volume con le impostazioni seguenti.  
Nell'elenco File system, selezionare NTFS.  
Nell'elenco Dimensioni unità di allocazione, selezionare 64 K.  
Nel campo Etichetta volume, digitare una descrizione per il nuovo volume.  
Fare clic per selezionare Esegui formattazione veloce.  
Fare clic su Avanti>.  
Viene visualizzata la finestra di dialogo finale di Creazione guidata nuovo volume  
semplice.  
Bosch Sicherheitssysteme GmbH  
Manuale del software  
Doc | V1 | 2010.09  
62 it | Configurazione delle destinazioni iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
9. Verificare le impostazioni e fare clic su Fine.  
4.3  
Creazione di un disco virtuale  
1. Avviare Server Manager.  
2. Espandere Archiviazione, espandere Destinazione Software iSCSI Microsoft, espandere  
Destinazioni iSCSI e quindi fare clic con il pulsante destro del mouse sulla destinazione  
iSCSI già aggiunta.  
3. Fare clic su Crea disco rigido virtuale per destinazione iSCSI.  
4. In Creazione guidata disco rigido virtuale, fare clic su Avanti>.  
Doc | V1 | 2010.09  
Manuale del software  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Configurazione delle destinazioni iSCSI | it  
63  
5. Nella finestra di dialogo File, digitare un nome file completo. Utilizzare anche l'estensione  
.vhd.  
6. Fare clic su Avanti>.  
7. Nella finestra di dialogo Dimensione, digitare la dimensione del nuovo disco virtuale in  
MB. Per il valore massimo, digitare il valore del campo Spazio attualmente disponibile  
moltiplicato per 1.024.  
Nota  
La dimensione del file .vhdè uguale alla dimensione del LUN e non deve superare i 2 TB  
in quanto il firmware BVIP supporta una dimensione LUN massima di 2 TB.  
8. Fare clic su Avanti>.  
Il disco virtuale è stato creato.  
Con la procedura descritta in questo capitolo, è possibile aggiungere ulteriori dischi fino  
all'esaurimento della capacità fisica del disco rigido.  
Il disk array è a questo punto configurato correttamente ed è possibile utilizzarlo per le  
rispettive applicazioni iSCSI.  
4.4  
Modifica delle impostazioni LUN iSCSI  
Quando si devono modificare le impostazioni LUN, è necessario prima eliminare i LUN e  
quindi riconfigurarli.  
Per eliminare un LUN:  
1. Avviare Server Manager.  
Bosch Sicherheitssysteme GmbH  
Manuale del software  
Doc | V1 | 2010.09  
   
64 it | Configurazione delle destinazioni iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
2. Fare clic con il pulsante destro del mouse sul disco virtuale (=LUN) e fare clic su Elimina  
disco virtuale.  
3. Fare clic su per confermare il messaggio di avviso che segue.  
4. Per liberare realmente spazio e aumentare la capacità, eliminare manualmente il file .vhd  
in Esplora risorse.  
A questo punto, è possibile riconfigurare i LUN in base a quanto indicato nelle sezioni  
4.1 - 4.3 .  
Doc | V1 | 2010.09  
Manuale del software  
Bosch Sicherheitssysteme GmbH  
| ja  
65  
1200 and 1400 Series iSCSI Disk Arrays  
目次  
お知らせ  
システムの概要  
iSCSI の概要  
iSCSI ネットワークコンポーネント  
Microsoft iSCSI Software Target のコンポーネント  
システムの設定  
Windows Update を無効にする  
iSCSI Software Target 用に Windows ファイアウォールを構成する  
iSCSI ターゲットの設定  
iSCSI ターゲットの作成  
シンプルボリュームの作成  
仮想ディスクの作成  
iSCSI LUN 設定の変更  
Bosch Sicherheitssysteme GmbH  
ソフトウェアマニュアル  
Doc | V1 | 2010.09  
 
66 ja | お知らせ  
1200 and 1400 Series iSCSI Disk Arrays  
1
お知らせ  
デバイスの最初のポートのデフォルト IP アドレスは、10.10.10.10 です  
すべての Bosch DLA シリーズディスクアレイは、デフォルト IP アドレスおよびデフォルト iSCSI  
設定であらかじめ設定されています。  
デフォルト iSCSI 設定は、VRM との併用に最適化されています。経験豊富なストレージ管理者のみ  
が、この設定を変更してください。下記の設定手順は、VRM を使用していない場合、またはデフォ  
ルト設定が別の Bosch iSCSI アプリケーションに適していない場合に限って必要となります。  
Microsoft Windows Storage Server 2008 オペレーティングシステムは、サーバーの初期設定用のユ  
ーザーインターフェース、ストレージアプライアンスの統一管理、ストレージおよび共有フォルダ  
ーの簡便な設定と管理、そして Microsoft iSCSI Software Target のサポートを提供します。このオペ  
レーティングシステムは、ネットワークに接続したストレージでパフォーマンスが最適になるよう  
に特別に調整されています。Windows Storage Server 2008 は、共有とストレージの管理の状況、ス  
トレージアプライアンス管理コンポーネントおよび機能の統合で大きく拡張されています。  
Doc | V1 | 2010.09  
ソフトウェアマニュアル  
Bosch Sicherheitssysteme GmbH  
 
システムの概要 | ja  
67  
1200 and 1400 Series iSCSI Disk Arrays  
2
システムの概要  
Windows Storage Server 2008 の Microsoft iSCSI Software Target を使用すると、iSCSI ターゲット  
を作成して管理したり、ストレージの仮想ディスクを作成して管理したり、スナップショットを使  
用してバックアップとリカバリーをサポートしたりすることができます。  
注:  
Microsoft iSCSI Software Target はべての Bosch DLA モデルであらかじめインストールされて設  
定済みになっています。インストールされていない、またはストレージアプライアンスに付属して  
いない場合は、Microsoft iSCSI Software Target の取得方法について、ストレージアプライアンスの  
製造元にお問い合せください。  
2.1  
iSCSI の概要  
ディスクコントローラーがディスクドライブと通信できるように、ATA (SATA)や SCSI (SAS)  
などのいくつかのプロトコルを使用できます。これらのプロトコルは、READ/WRITE 要求などのコ  
マンドをパッケージ化して、コントローラーとディスクドライブ間で送信する方法を決定する、定  
義済み規格です。iSCSI プロトコルでは、SCSI コマンドが TCP/IP パケットにカプセル化されるよ  
う SCSI 規格が拡張されています。これらのコマンドは TCP/IP ネットワークで送信されるので、サ  
ーバーはストレージエリアネットワーク (SAN)でストレージにアクセスできます。これによっ  
て、一元的なバックアップおよびリモートシステムリカバリーを含めて、統合されたストレージの  
実現と一元管理が容易になります。  
2.1.1  
iSCSI ネットワークコンポーネント  
iSCSI ネットワークには、次の 3 つのコンポーネントがあります。  
-
iSCSI ターゲット  
ローカルに接続したストレージのディスクドライブのようなストレージを提供しますが、ローカル  
ではなくネットワーク経由でアクセスします。この機能は、Windows Storage Server 2008 の  
Microsoft iSCSI Software Target で提供されます。  
-
iSCSI イニシエーター  
クライアントと呼ばれることもあります。iSCSI ターゲットは iSCSI イニシエーターにストレージを  
提供し、iSCSI イニシエーターはターゲットによって提供されるディスクのディスクコントローラー  
のように動作します。  
-
ストレージファブリック  
インターネットプロトコル (IP)に基づくネットワークであり、iSCSI ターゲットを iSCSI イニシ  
エーターに接続します。ストレージファブリックは、一般的にギガビットローカルエリアネットワ  
ーク (LAN)です。  
2.1.2  
Microsoft iSCSI Software Target のコンポーネント  
Microsoft iSCSI Software Target パッケージは、次の 3 つのコンポーネントから構成されています。  
-
Microsoft iSCSI Software Target – このコンポーネントにより、仮想ディスクを作成して管理し  
たり、iSCSI ターゲットを作成して管理したり、スナップショットによって iSCSI ターゲット  
のバックアップとリカバリーを提供したりすることができます。  
-
ボリュームシャドウコピーサービス (VSS)ハードウェアプロバイダー – イニシエーターのコ  
ンピューターにインストールされ、VSS サービスと連動して、Microsoft iSCSI Software Target  
を実行しているコンピューターで iSCSI 仮想ディスクのアプリケーション整合性スナップショ  
ットを提供します。  
-
仮想ディスクサービス (VDS)ハードウェアプロバイダー – イニシエーターのコンピューター  
にインストールされ、VDS 対応アプリケーションが、Microsoft iSCSI Software Target を実行  
しているストレージアプライアンスで仮想ディスクを管理できるようにします。  
Bosch Sicherheitssysteme GmbH  
ソフトウェアマニュアル  
Doc | V1 | 2010.09  
       
68 ja | システムの概要  
1200 and 1400 Series iSCSI Disk Arrays  
注:  
Microsoft iSCSI イニシエーターは、同一コンピューターで実行されている Microsoft iSCSI Software  
Target に接続できません。Microsoft Windows Storage Server 2008 に基づく Bosch iSCSI ディスク  
アレイは、iSCSI ターゲット機能のみを使用します。ストレージアレイで Bosch アプリケーション  
を実行する Bosch のオールインワンストレージソリューションは、同一ターゲットに接続できる独  
自の iSCSI イニシエーターを提供します。  
Doc | V1 | 2010.09  
ソフトウェアマニュアル  
Bosch Sicherheitssysteme GmbH  
システムの設定 | ja  
69  
1200 and 1400 Series iSCSI Disk Arrays  
3
システムの設定  
この章では、使用前に iSCSI デバイスを準備する方法について説明します。すべての Bosch DLA デ  
ィスクアレイは、事前インストールと設定がされた状態なので、購入したばかりの iSCSI デバイス  
ではこれらの作業はすでに実施済みです。しかし、iSCSI デバイスで RAID 保護されていないハード  
ディスクを変更した場合は、再度これらの設定作業の一部を実施しなければならないことがありま  
す。  
3.1  
Windows Update を無効にする  
Windows Update を無効にするには、次の手順に従います。  
1. Server Manager を開きます。  
2. Security Information セクションで Configure Updates をクリックしてから Change Settings を  
クリックし、Never check for updates をクリックしてオンにします。  
3. OK をクリックします。  
3.2  
iSCSI Software Target 用に Windows ファイアウォールを構成する  
必要なネットワークトラフィックが通過できるように、Windows ファイアウォールを構成する必要  
があります。必要なポートを次の表に示します。  
ポートまたはアプリケーション  
TCP 3260  
説明  
Microsoft iSCSI Software Target サービス。このポートは、  
Microsoft iSCSI Software Target へのプライマリアクセスを提  
供します。  
TCP 135  
UDP 138  
リモートプロシージャコール (RPCこのポートは、コンポ  
ーネントオブジェクトモデル (COM)通信に必要となりま  
す。  
NetBIOS データグラムサービス。この例外はファイルおよび印  
刷サービスの役割のためにすでに存在するはずですが、存在し  
ない場合は手動で追加する必要があります。  
%windir%\System32\Wintarg Microsoft iSCSI Software Target サービス  
et.exe  
%windir%\System32\WTStatu Microsoft iSCSI Software Target ステータスプロキシ  
sProxy.exe  
注:  
Windows ファイアウォール例外を WTStatusProxy.exe用に設定していない場合は、Microsoft  
iSCSI Software Target をリモート管理しようとすると、リモートプロシージャコール (RPC)エラ  
ーが発生することがあります。  
次の表では、iSCSI イニシエーターコンピューターで許可する必要がある Windows ファイアウォー  
ルの例外について説明します。  
アプリケーション例外  
説明  
%windir%\System32\Wtvds.exe  
Microsoft iSCSI Software Target の VDS ハードウェア  
プロバイダー  
プログラムの着信フィルタールールを追加するには、次の手順に従います。   
1. [セキュリティが強化された Windows ファイアウォール]を開きます。サーバーマネージャー  
[構成]に続けて [セキュリティが強化された Windows ファイアウォール]を展開し、  
[受信の規則]をクリックします。  
2. [操作]枠で [新しい規則]をクリックします。  
Bosch Sicherheitssysteme GmbH  
ソフトウェアマニュアル  
Doc | V1 | 2010.09  
     
70 ja | システムの設定  
1200 and 1400 Series iSCSI Disk Arrays  
3. [どの種類の規則を作成しますか?][プログラム]をクリックし[次へ]をクリックし  
ます。  
4. [参照]をクリックし、 %windir%\System32フォルダーに移動して、Wintarget.exe をクリ  
ックします。 [開く]をクリックし[次へ]をクリックします。  
5. [接続を許可する]をクリックし[次へ]をクリックします。  
6. このルールに拘束されるネットワークロケーションを選択します (デフォルトはドメイ  
プライベートパブリック]です[次へ]をクリックします。  
7. ルールの内容について説明するような名前を [名前]に入力します。たとえば、Wintarget.exe  
のプログラムルールにはMicrosoft iSCSI Software Target Service」と入力します。 [完了]  
をクリックします。  
ポートの着信フィルタールールを追加するには、次の手順に従います。  
1. [セキュリティが強化された Windows ファイアウォール]を開きます。サーバーマネージャー  
[構成]に続けて [セキュリティが強化された Windows ファイアウォール]を展開し、  
[受信の規則]をクリックします。  
2. [操作]枠で [新しい規則]をクリックします。  
3. [どの種類の規則を作成しますか?][ポート]をクリックし[次へ]をクリックします。  
4. このルールのプロトコルとして、TCP または UDP を選択します。 [すべてのローカルポート  
と特定のローカルポートのどちらにこの規則を適用しますか?][特定のローカルポート]  
をクリックし、適切なポート番号を入力します。  
5. [接続を許可する]をクリックし[次へ]をクリックします。  
6. このルールに拘束されるネットワークロケーションを選択します (デフォルトはドメイ  
プライベートパブリック]です[次へ]をクリックします。  
7. ルールの内容について説明するような名前を [名前]に入力します。たとえば、TCP ポート  
135 の RPC 通信にはRemote Procedure Call」と入力します。 [完了]をクリックします。  
次のサンプルスクリプトを使用してコマンドラインから Windows ファイアウォールを設定するに  
は、次の手順に従います。  
1. netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-TCP-3260" dir=in action=allow protocol=TCP  
localport=3260netsh advfirewall firewall add rule name="Microsoft iSCSI  
Software Target Service-TCP-135" dir=in action=allow protocol=TCP  
localport=135  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-UDP-138" dir=in action=allow protocol=UDP localport=138  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service" dir=in action=allow  
program="%SystemRoot%\System32\WinTarget.exe" enable=yesnetsh  
advfirewall firewall add rule name="Microsoft iSCSI Software Target  
Service Status Proxy" dir=in action=allow  
program="%SystemRoot%\System32\WTStatusProxy.exe" enable=yes  
Doc | V1 | 2010.09  
ソフトウェアマニュアル  
Bosch Sicherheitssysteme GmbH  
iSCSI ターゲットの設定 | ja  
71  
1200 and 1400 Series iSCSI Disk Arrays  
4
iSCSI ターゲットの設定  
iSCSI Software Target を使用して作成したディスクは iSCSI 仮想ディスクであり、固定容量仮想ハ  
ードディスク (VHD)形式になっているファイルです。  
iSCSI ターゲットを設定するには、次のタスクを実行する必要があります。  
-
-
-
-
4.1  
iSCSI ターゲットの作成  
1. [スタート]をクリックし[サーバーマネージャー]をクリックします。  
2. [ストレージ]に続けて [Microsoft iSCSI Software Target]を展開し[iSCSI ターゲット]  
をクリックします。  
3. [iSCSI ターゲット]を右クリックし[iSCSI ターゲットの作成]をクリックします。  
[iSCSI ターゲットの作成ウィザード]ダイアログボックスが表示されます。  
4. [次へ >]をクリックします。  
5. [iSCSI ターゲット名]フィールドに、目的の名前を入力します。  
-
-
必要に応じて、新しい iSCSI ターゲットの説明を入力します。  
[次へ >]をクリックします。  
6. [IQN 識別子]フィールドに、 *と入力します。  
Bosch Sicherheitssysteme GmbH  
ソフトウェアマニュアル  
Doc | V1 | 2010.09  
     
72 ja | iSCSI ターゲットの設定  
1200 and 1400 Series iSCSI Disk Arrays  
7. [次へ >]をクリックします。  
8. [完了]をクリックします。  
iSCSI ターゲットが、サーバーマネージャーの [iSCSI ターゲット]リストに追加されます。  
注意:すべての LUN は 1 つのターゲット設定になるので、作成する必要がある iSCSI ターゲッ  
トは 1 つのみです。  
4.2  
シンプルボリュームの作成  
1. サーバーマネージャーを起動します。  
2. [ストレージ]を展開し[ディスクの管理]をクリックします。  
Doc | V1 | 2010.09  
ソフトウェアマニュアル  
Bosch Sicherheitssysteme GmbH  
   
iSCSI ターゲットの設定 | ja  
73  
1200 and 1400 Series iSCSI Disk Arrays  
3. [ディスク 1]を右クリックし[オンライン]をクリックします。  
4. シンプルボリュームを作成するダイナミックディスクで、割り当てられていない領域を右クリ  
ックし[新しいシンプルボリューム]をクリックします。  
5. [新しいシンプルボリュームウィザード][次へ >]をクリックします。  
6. [ボリュームサイズの指定]ダイアログボックスでデフォルト設定を変更せずに [次へ >]を  
クリックします。  
7. [ドライブ文字またはパスの割り当て]ダイアログボックスで、目的のドライブ文字を入力し、  
[次へ >]をクリックします。  
8. [パーティションのフォーマット]ダイアログボックスで [このボリュームを次の設定でフォ  
ーマットする]をクリックしてオンにします。  
-
-
-
-
-
[ファイルシステム]リストで [NTFS]を選択します。  
[アロケーションユニットサイズ]リストで [64K]を選択します。  
[ボリュームラベル]フィールドに、新しいボリュームの説明を入力します。  
[クイックフォーマットする]をクリックしてオンにします。  
[次へ >]をクリックします。  
[新しいシンプルボリュームウィザード]という最後のダイアログボックスが表示されます。  
Bosch Sicherheitssysteme GmbH  
ソフトウェアマニュアル  
Doc | V1 | 2010.09  
74 ja | iSCSI ターゲットの設定  
1200 and 1400 Series iSCSI Disk Arrays  
9. 設定を確認し[完了]をクリックします。  
4.3  
仮想ディスクの作成  
1. サーバーマネージャーを起動します。  
2. [ストレージ[Microsoft iSCSI Software Target[iSCSI ターゲット]の順に展開し、す  
でに追加してある iSCSI ターゲットを右クリックします。  
3. [iSCSI ターゲット用の仮想ディスクの作成]をクリックします。  
4. [仮想ディスクの作成ウィザード][次へ >]をクリックします。  
Doc | V1 | 2010.09  
ソフトウェアマニュアル  
Bosch Sicherheitssysteme GmbH  
   
iSCSI ターゲットの設定 | ja  
75  
1200 and 1400 Series iSCSI Disk Arrays  
5. [ファイル]ダイアログボックスで、ファイルの完全修飾名を入力します。拡張子は .vhdに  
してください。  
6. [次へ >]をクリックします。  
7. [サイズ]ダイアログボックスで、新しい仮想ディスクのサイズを MB 単位で入力します。最  
大値にするには[現在の空き領域]フィールドに 1024 を掛けた値を入力します。  
注意:  
.vhdファイルのサイズは LUN のサイズと等しくして、2TB を超えないようにする必要があり  
ます。BVIP ファームウェアがサポートする最大 LUN サイズは 2TB であるためです。  
8. [次へ >]をクリックします。  
仮想ディスクが作成されます。  
この章で説明した手順を使用し、物理ハードディスク容量を使い切るまで、さらに多くのディ  
スクを追加できます。  
これで、ディスクアレイが正常に設定され、それぞれの iSCSI アプリケーションに使用できる  
ようになりました。  
4.4  
iSCSI LUN 設定の変更  
LUN 設定を変更する必要があるときは、LUN を削除してから再設定する必要があります。  
LUN を削除するには、次の手順に従います。  
1. サーバーマネージャーを起動します。  
Bosch Sicherheitssysteme GmbH  
ソフトウェアマニュアル  
Doc | V1 | 2010.09  
   
76 ja | iSCSI ターゲットの設定  
1200 and 1400 Series iSCSI Disk Arrays  
2. 仮想ディスク (=LUN)を右クリックし[仮想ディスクの削除]をクリックします。  
3. 表示される警告メッセージを確認し[はい]をクリックします。  
4. 容量を実際に解放するには、Windows エクスプローラーで .vhdファイルを手動で削除しま  
す。  
これで、セクション 4.1 - 4.3 に従って、LUN を再設定できるようになりました。  
Doc | V1 | 2010.09  
ソフトウェアマニュアル  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Inhoudsopgave | nl  
77  
Inhoudsopgave  
Beknopte informatie  
Systeemoverzicht  
Overzicht iSCSI  
Onderdelen iSCSI-netwerk  
Onderdelen Microsoft iSCSI Software Target  
Configuratie van het systeem  
Windows Update uitschakelen  
Windows Firewall configureren voor iSCSI Software Target  
iSCSI-doelen configureren  
iSCSI-doel maken  
Eenvoudig volume maken  
Virtuele schijf maken  
LUN-instellingen iSCSI aanpassen  
Bosch Sicherheitssysteme GmbH  
Softwarehandleiding  
Doc | V1 | 2010.09  
 
78 nl | Beknopte informatie  
1200 and 1400 Series iSCSI Disk Arrays  
1
Beknopte informatie  
Het standaard IP-adres van het apparaat is: 10.10.10.10 op de eerste poort  
Alle Bosch DLA serie disk-arrays zijn vooraf geconfigureerd met een standaard IP-adres en  
standaard iSCSI-instellingen.  
Standaard iSCSI-instellingen zijn geoptimaliseerd voor gebruik met VRM. Alleen een ervaren  
opslagbeheerder mag wijzigingen doorvoeren aan deze instellingen. De volgende  
configuratiestappen zijn alleen nodig wanneer VRM niet wordt gebruikt of wanneer de  
standaard instellingen niet geschikt zijn voor een andere Bosch iSCSI-applicatie.  
Microsoft Windows Storage Server 2008 besturingssystemen hebben een gebruikersinterface  
voor initiële serverconfiguratie, universeel beheer van opslagapparaten, eenvoudige  
configuratie, eenvoudig beheer van opslag en gedeelde mappen en ondersteuning voor  
Microsoft iSCSI Software Target. Het systeem is speciaal afgestemd voor optimale prestaties  
voor op netwerk aangesloten opslag. Windows Storage Server 2008 zorgt voor aanzienlijke  
verbeteringen met betrekking tot scenario's voor deeldoeleinden en opslagbeheer en de  
integratie van onderdelen en functionaliteiten voor beheer van opslagapparaten.  
Doc | V1 | 2010.09  
Softwarehandleiding  
Bosch Sicherheitssysteme GmbH  
 
1200 and 1400 Series iSCSI Disk Arrays  
Systeemoverzicht | nl  
79  
2
Systeemoverzicht  
Met Microsoft iSCSI Software Target in Windows Storage Server 2008 kunt u iSCSI-doelen en  
virtuele schijven voor opslag maken en beheren en ondersteuning voor back-up en herstel  
implementeren door gebruik te maken van momentopnamen.  
Opmerking  
Microsoft iSCSI Software Target is vooraf geïnstalleerd en geconfigureerd op alle Bosch DLA-  
modellen. Als het niet is geïnstalleerd of meegeleverd bij het opslagapparaat, neem dan  
contact op met de fabrikant van het opslagapparaat voor informatie over het verkrijgen van  
Microsoft iSCSI Software Target.  
2.1  
Overzicht iSCSI  
Er zijn verschillende protocollen zoals bijvoorbeeld ATA (SATA) en SCSI (SAS) beschikbaar om  
te zorgen dat de schijfcontroller kan communiceren met schijfstations. Deze protocollen zijn  
vastgelegde standaarden die bepalen hoe opdrachten zoals bijvoorbeeld lees- en  
schrijfverzoeken worden verpakt en verstuurd tussen de controller en het schijfstation. Het  
iSCSI-protocol zorgt voor uitbreiding van de SCSI-standaarden door SCSI-opdrachten in te  
sluiten in TCP/IP-pakketten. Deze opdrachten worden verstuurd via een TCP/IP-netwerk,  
waardoor servers toegang hebben tot opslag op een Storage Area Network (SAN). Dit maakt  
implementatie en gecentraliseerd beheer van geconsolideerde opslag mogelijk inclusief  
gecentraliseerde backup en systeemherstel op afstand.  
2.1.1  
Onderdelen iSCSI-netwerk  
Een iSCSI-netwerk bevat drie onderdelen:  
iSCSI-doel  
Het iSCSI-doel biedt opslag (te vergelijken met de schijfstations van lokaal aangesloten  
opslag), maar toegang vindt plaats via een netwerk en niet lokaal. Deze functionaliteit wordt  
in Windows Storage Server 2008 geleverd door Microsoft iSCSI Software Target.  
iSCSI-initiator  
De iSCSI-initiator wordt soms ook wel de client genoemd. Het iSCSI-doel zorgt voor de opslag  
naar de iSCSI-initiator, die werkt als schijfcontroller voor de schijven met het doel als host.  
Opslagsysteem  
Dit is een netwerk gebaseerd op het Internet Protocol (IP) voor verbinding van het iSCSI-doel  
met de iSCSI-initiator. Het opslagsysteem is over het algemeen een Gigabit Local Area  
Network (LAN).  
2.1.2  
Onderdelen Microsoft iSCSI Software Target  
Het Microsoft iSCSI Software Target pakket omvat drie onderdelen:  
Microsoft iSCSI Software Target – Met behulp van dit onderdeel kunt u virtuele schijven  
en iSCSI-doelen maken en beheren en zorgen voor back-up en herstel van iSCSI-doelen  
door gebruik te maken van momentopnamen.  
Volume Shadow Copy Service (VSS) Hardware Provider – De VSS Hardware Provider is  
geïnstalleerd op de computer van de initiator en werkt met de VSS-service om te zorgen  
voor momentopnamen van iSCSI virtuele schijven (consistent met de applicatie) op de  
computer met Microsoft iSCSI Software Target.  
Virtual Disk Service (VDS) Hardware Provider – De VDS Hardware Provider is  
geïnstalleerd op een computer van de initiator en laat VDS-bewuste applicaties virtuele  
schijven beheren op een opslagapparaat met Microsoft iSCSI Software Target.  
Bosch Sicherheitssysteme GmbH  
Softwarehandleiding  
Doc | V1 | 2010.09  
       
80 nl | Systeemoverzicht  
1200 and 1400 Series iSCSI Disk Arrays  
Opmerking  
De Microsoft iSCSI-initiator kan niet worden aangesloten op een Microsoft iSCSI Software  
Target die op dezelfde computer draait. De Bosch iSCSI disk-arrays gebaseerd op Microsoft  
Windows Storage Server 2008 maken alleen gebruik van de functionaliteit iSCSI-doel. De  
Bosch alles-in-één-opslagoplossingen met een Bosch applicatie op de disk-array beschikken  
over een eigen iSCSI-initiator die kan worden verbonden met hetzelfde doel.  
Doc | V1 | 2010.09  
Softwarehandleiding  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Configuratie van het systeem | nl  
81  
3
Configuratie van het systeem  
Dit hoofdstuk bevat informatie over de voorbereiding van het iSCSI-apparaat alvorens het in  
gebruik te nemen. Deze taken zijn reeds uitgevoerd op een iSCSI-apparaat dat u net heeft  
aangeschaft, omdat alle Bosch DLA disk-arrays voorgeïnstalleerd en voorgeconfigureerd  
worden geleverd. Als u echter op een iSCSI-apparaat harde schijven vervangt zonder RAID-  
beveiliging, dan moet u opnieuw enkele configuratietaken uitvoeren.  
3.1  
3.2  
Windows Update uitschakelen  
Windows Update uitschakelen:  
1. Open Server Manager.  
2. Klik in het gedeelte Security Information op Configure Updates en Change Settings en  
klik om Never check for updates in te schakelen.  
3. Klik op OK.  
Windows Firewall configureren voor iSCSI Software Target  
De Windows Firewall moet worden geconfigureerd voor doorgang van het benodigde  
netwerkverkeer. In de volgende tabel staan de benodigde poorten vermeld.  
Poort of applicatie  
TCP 3260  
Beschrijving  
Microsoft iSCSI Software Target Service. Deze poort wordt  
gebruikt voor de primaire toegang tot Microsoft iSCSI  
Software Target.  
TCP 135  
UDP 138  
Remote Procedure Call (RPC), deze poort wordt gebruikt  
voor Component Object Model (COM) communicatie.  
NetBIOS Datagram Service, deze uitzondering moet reeds  
bestaan voor de rol File and Print Service, maar moet  
wellicht handmatig worden toegevoegd als deze niet  
aanwezig is.  
%windir%\System32\Wintarg Microsoft iSCSI Software Target Service  
et.exe  
%windir%\System32\WTStatu Statusproxy Microsoft iSCSI Software Target  
sProxy.exe  
Opmerking  
U kunt wellicht Remote Procedure Call (RPC) fouten ontvangen als u probeert op afstand een  
Microsoft iSCSI Software Target te beheren wanneer u de Windows Firewall uitzondering niet  
heeft geconfigureerd voor WTStatusProxy.exe.  
De volgende tabel bevat de Windows Firewall uitzonderingen die moeten worden  
doorgevoerd op de computer van de iSCSI-initiator.  
Applicatie-uitzondering  
Beschrijving  
%windir%\System32\Wtvds.exe  
De VDS Hardware Provider van Microsoft iSCSI  
Software Target  
Een binnenkomende filterregel toevoegen voor een programma:  
1. Open Windows Firewall with Advanced Security (Windows Firewall met geavanceerde  
beveiliging) Vouw in Server Manager (Serverbeheer) Configuration (Configuratie) en  
Windows Firewall with Advanced Security (Windows Firewall met geavanceerde  
beveiliging) uit en klik op Inbound Rules (Regels voor binnenkomende verbindingen).  
Bosch Sicherheitssysteme GmbH  
Softwarehandleiding  
Doc | V1 | 2010.09  
     
82 nl | Configuratie van het systeem  
1200 and 1400 Series iSCSI Disk Arrays  
2. Klik in het deelvenster Actions (Acties) op New Rule (Nieuwe regel).  
3. Klik onder What type of rule would you like to create (Welk regeltype wilt u maken?) op  
Program (Programma) en klik vervolgens op Next (Volgende).  
4. Klik op Browse (Bladeren), navigeer naar de map %windir%\System32en klik op  
Wintarget.exe. Klik op Open (Openen) en vervolgens op Next (Volgende).  
5. Klik op Allow the connection (De verbinding toestaan)en klik vervolgens op Next  
(Volgende).  
6. Selecteer de netwerklocaties die aan deze regel moeten worden gebonden (de  
standaardinstelling is Domain (Domein), Private (Privé) en Public (Openbaar)). Klik op  
Next (Volgende).  
7. Voer onder Name (Naam) een beschrijvende naam voor de regel in. Voer bijvoorbeeld  
Microsoft iSCSI Software Target Service in voor de programmaregel voor Wintarget.exe.  
Klik op Finish (Voltooien).  
Een binnenkomende filterregel toevoegen voor een poort:  
1. Open Windows Firewall with Advanced Security (Windows Firewall met geavanceerde  
beveiliging) Vouw in Server Manager (Serverbeheer) Configuration (Configuratie) en  
Windows Firewall with Advanced Security (Windows Firewall met geavanceerde  
beveiliging) uit en klik op Inbound Rules (Regels voor binnenkomende verbindingen).  
2. Klik in het deelvenster Actions (Acties) op New Rule (Nieuwe regel).  
3. Klik onder What type of rule would you like to create (Welk regeltype wilt u maken?) op  
Port (Poort) en klik vervolgens op Next (Volgende).  
4. Selecteer het protocol voor deze regel (TCP of UDP). Klik onder Does this rule apply to  
all local ports or specific local ports (Is deze regel van toepassing op alle lokale poorten  
of op bepaalde lokale poorten?) op Specific local ports (Specifieke lokaal) en voer het  
betreffende poortnummer in.  
5. Klik op Allow the connection (De verbinding toestaan)en klik vervolgens op Next  
(Volgende).  
6. Selecteer de netwerklocaties die aan deze regel moeten worden gebonden (de  
standaardinstelling is Domain (Domein), Private (Privé) en Public (Openbaar)). Klik op  
Next (Volgende).  
7. Voer onder Name (Naam) een beschrijvende naam voor de regel in. Voer bijvoorbeeld  
Remote Procedure Call in voor de RPC-communicatie via TCP-poort 135. Klik op Finish  
(Voltooien).  
Window Firewall instellingen configureren vanaf de opdrachtregel met het volgende  
voorbeeldscript:  
1. netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-TCP-3260" dir=in action=allow protocol=TCP  
localport=3260netsh advfirewall firewall add rule name="Microsoft iSCSI  
Software Target Service-TCP-135" dir=in action=allow protocol=TCP  
localport=135  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-UDP-138" dir=in action=allow protocol=UDP localport=138  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service" dir=in action=allow  
program="%SystemRoot%\System32\WinTarget.exe" enable=yesnetsh  
advfirewall firewall add rule name="Microsoft iSCSI Software Target  
Service Status Proxy" dir=in action=allow  
program="%SystemRoot%\System32\WTStatusProxy.exe" enable=yes  
Doc | V1 | 2010.09  
Softwarehandleiding  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
iSCSI-doelen configureren | nl  
83  
4
iSCSI-doelen configureren  
De schijven die u maakt met behulp van iSCSI Software Target zijn iSCSI virtuele schijven  
(bestanden in het vaste formaat Virtual Hard Disk (VHD)).  
U moet de volgende taken uitvoeren om de iSCSI-doelen te configureren:  
4.1  
iSCSI-doel maken  
1. Klik op Start en op Server Manager.  
2. Vouw Storage en Microsoft iSCSI Software Target uit en klik op iSCSI Targets.  
3. Klik met de rechtermuisknop op iSCSI Targets en klik op Create iSCSI Targets.  
Het dialoogvenster Create iSCSI Target Wizard wordt weergegeven.  
4. Klik op Next>.  
5. Voer in het veld iSCSI target name de gewenste naam in.  
Voer indien nodig een beschrijving van het nieuwe iSCSI-doel in.  
Klik op Next>.  
6. Voer in het veld IQN identifier *in.  
Bosch Sicherheitssysteme GmbH  
Softwarehandleiding  
Doc | V1 | 2010.09  
     
84 nl | iSCSI-doelen configureren  
1200 and 1400 Series iSCSI Disk Arrays  
7. Klik op Next>.  
8. Klik op Finish.  
Het iSCSI-doel wordt toegevoegd aan de lijst iSCSI Targets van de Server Manager.  
Opmerking: Er hoeft slechts één iSCSI-doel te worden gemaakt, omdat alle LUN's in  
dezelfde doelconfiguratie moeten worden ondergebracht.  
4.2  
Eenvoudig volume maken  
1. Start Server Manager.  
2. Vouw Storage uit en klik op Disk Management.  
Doc | V1 | 2010.09  
Softwarehandleiding  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
iSCSI-doelen configureren | nl  
85  
3. Klik met de rechter muisknop op Disk 1 en klik op Online.  
4. Klik met de rechter muisknop op de niet-toegewezen ruimte op de dynamische schijf  
waarop u het eenvoudige volume wilt maken en klik op New Simple Volume.  
5. Klik in de New Simple Volume Wizard, op Next>.  
6. Laat in het dialoogvenster Specify Volume Size de standaard instellingen ongewijzigd en  
klik op Next>.  
7. Voer in het dialoogvenster Assign Drive Letter or Path de gewenste schijfletter in en klik  
op Next>.  
8. Schakel in het dialoogvenster Format Partition het selectievakje Format this volume  
with the following settings in.  
Selecteer in de lijst File system NTFS.  
Selecteer in de lijst Allocation unit size 64K.  
Voer in het veld Volume label een beschrijving in voor het nieuwe volume.  
Schakel het selectievakje Perform a quick format in.  
Klik op Next>.  
Het laatste dialoogvenster van de New Simple Volume Wizard wordt weergegeven.  
Bosch Sicherheitssysteme GmbH  
Softwarehandleiding  
Doc | V1 | 2010.09  
86 nl | iSCSI-doelen configureren  
1200 and 1400 Series iSCSI Disk Arrays  
9. Controleer de instellingen en klik op Finish.  
4.3  
Virtuele schijf maken  
1. Start Server Manager.  
2. Vouw Storage, Microsoft iSCSI Software Target en iSCSI Targets uit en klik met de  
rechter muisknop op het reeds toegevoegde iSCSI-doel.  
3. Klik op Create Virtual Disk for iSCSI Target.  
4. Klik in de Create Virtual Disk Wizard op Next>.  
Doc | V1 | 2010.09  
Softwarehandleiding  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
iSCSI-doelen configureren | nl  
87  
5. Voer in het dialoogvenster File een volledig gekwalificeerde bestandsnaam in. Gebruik  
tevens de extensie .vhd.  
6. Klik op Next>.  
7. Voer in het dialoogvenster Size het aantal MB's in van de nieuwe virtuele schijf. Voer voor  
de maximale waarde de waarde van het veld Currently available free space in  
vermenigvuldigd met 1024.  
Opmerking:  
Het formaat van het .vhdbestand is gelijk aan het formaat van de LUN en mag niet meer  
zijn dan 2TB, omdat de BVIP-firmware een LUN-formaat ondersteunt van maximaal 2TB.  
8. Klik op Next>.  
De virtuele schijf is gemaakt.  
Aan de hand van de in dit hoofdstuk beschreven procedure kunt u een willekeurig aantal  
schijven toevoegen tot de fysieke capaciteit van de harde schijf is bereikt.  
De disk-array is nu succesvol geconfigureerd en u kunt deze gebruiken voor de  
bijbehorende iSCSI-applicaties.  
4.4  
LUN-instellingen iSCSI aanpassen  
Als de LUN-instellingen moeten worden gewijzigd, moeten de LUN's eerst worden verwijderd  
en vervolgens worden geconfigureerd.  
Een LUN verwijderen:  
1. Start Server Manager.  
Bosch Sicherheitssysteme GmbH  
Softwarehandleiding  
Doc | V1 | 2010.09  
   
88 nl | iSCSI-doelen configureren  
1200 and 1400 Series iSCSI Disk Arrays  
2. Klik met de rechter muisknop op de virtuele schijf (=LUN) en klik op Delete Virtual Disk.  
3. Klik op Yes om de volgende waarschuwingsmelding te bevestigen.  
4. Om de capaciteit daadwerkelijk vrij te maken moet u het .vhdbestand handmatig  
verwijderen in Windows Explorer.  
U kunt nu de LUN's opnieuw configureren aan de hand van hoofdstuk 4.1 - 4.3 .  
Doc | V1 | 2010.09  
Softwarehandleiding  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Spis treści | pl  
89  
Spis treści  
Informacje podstawowe  
Przegląd systemu  
iSCSI – przegląd  
Składniki sieci iSCSI  
Składniki oprogramowania Microsoft iSCSI Software Target  
Konfigurowanie systemu  
Wyłączanie usługi Windows Update  
Konfigurowanie zapory systemu Windows na potrzeby programu iSCSI Software Target  
Konfigurowanie lokalizacji docelowych iSCSI  
Tworzenie lokalizacji docelowej iSCSI  
Tworzenie woluminu prostego  
Tworzenie dysku wirtualnego  
Modyfikowanie ustawień LUN iSCSI  
Bosch Sicherheitssysteme GmbH  
Instrukcja obsługi oprogramowania  
Doc | V1 | 2010.09  
 
90 pl | Informacje podstawowe  
1200 and 1400 Series iSCSI Disk Arrays  
1
Informacje podstawowe  
Domyślny adres IP urządzenia to 10.10.10.10 na pierwszym porcie  
Wszystkie macierze dyskowe Bosch serii DLA są konfigurowane fabrycznie przy użyciu  
domyślnego adresu IP i domyślnych ustawień iSCSI.  
Domyślne ustawienia iSCSI są zoptymalizowane pod kątem używania z oprogramowaniem  
VRM. Zmiany tych ustawień powinien wykonywać tylko doświadczony administrator urządzeń  
pamięci masowej. Poniższe czynności konfiguracyjne są wymagane tylko, jeżeli nie jest  
stosowane oprogramowanie VRM lub jeżeli ustawienia domyślne nie są odpowiednie dla  
innego zastosowania macierzy Bosch iSCSI.  
W systemie operacyjnym Microsoft Windows Storage Server 2008 dostępne są rozwiązania w  
zakresie interfejsu użytkownika do wstępnej konfiguracji serwera, ujednoliconego zarządzania  
urządzeniami pamięci masowych, uproszczonej konfiguracji i zarządzania przechowywanymi  
danymi i folderami udostępnionymi, a także obsługi oprogramowania Microsoft iSCSI  
Software Target. Jest on specjalnie dostosowany do zapewnienia optymalnego działania  
pamięci masowej podłączonej przez sieć. System Windows Storage Server 2008 oferuje  
znaczne ulepszenia w zakresie zarządzania udostępnianiem i danymi, a także integracji  
składników i funkcji zarządzania urządzeniami pamięci masowych.  
Doc | V1 | 2010.09  
Instrukcja obsługi oprogramowania  
Bosch Sicherheitssysteme GmbH  
 
1200 and 1400 Series iSCSI Disk Arrays  
Przegląd systemu | pl  
91  
2
Przegląd systemu  
Oprogramowanie Microsoft iSCSI Software Target w systemie Windows Storage Server 2008  
umożliwia tworzenie lokalizacji docelowych iSCSI i zarządzanie nimi, tworzenie dysków  
wirtualnych do przechowywania danych i zarządzanie nimi oraz obsługę kopii zapasowych i  
odzyskiwania za pomocą migawek.  
Uwaga  
Oprogramowanie Microsoft iSCSI Software Target jest wstępnie zainstalowane i  
skonfigurowane na wszystkich modelach urządzeń pamięci masowej Bosch DLA. Jeżeli  
oprogramowanie nie jest zainstalowane ani dostarczone z danym urządzeniem pamięci  
masowej, należy skontaktować się z jego producentem odnośnie możliwości uzyskania  
oprogramowania Microsoft iSCSI Software Target.  
2.1  
iSCSI – przegląd  
Dostępne są protokoły, takie jak ATA (SATA) i SCSI (SAS), umożliwiające przesyłanie danych  
między kontrolerem i dyskami. Protokoły te stanowią zdefiniowane standardy określające  
sposób łączenia w pakiety poleceń, takich jak żądania zapisu i odczytu, oraz ich transmisji  
między kontrolerem i dyskiem. Protokół iSCSI stanowi rozszerzenie standardów SCSI ze  
względu na zawarcie poleceń SCSI w pakietach TCP/IP. Pakiety te są przesyłane przez sieć  
TCP/IP, dzięki czemu serwery mogą uzyskiwać dostęp do sieci pamięci masowej (SAN –  
storage area network). Ułatwia to wdrażanie i centralne zarządzanie połączonymi  
urządzeniami pamięci masowej z uwzględnieniem centralnego tworzenia kopii zapasowych i  
zdalnego odzyskiwania systemu.  
2.1.1  
Składniki sieci iSCSI  
Na sieć iSCSI składają się trzy elementy:  
Lokalizacja docelowa iSCSI  
Lokalizacja docelowa iSCSI zapewnia przestrzeń do przechowywania danych, podobnie jak  
dyski urządzenia pamięci masowej podłączonego lokalnie, lecz dostępną przez sieć. Funkcja  
ta jest dostępna w systemie Windows Storage Server 2008 dzięki zastosowaniu  
oprogramowania Microsoft iSCSI Software Target.  
Inicjator iSCSI  
Inicjator iSCSI nazywany jest również klientem. Lokalizacja docelowa iSCSI zapewnia  
przestrzeń do przechowywania danych dla inicjatora iSCSI, który służy za kontroler dysków  
hostowanych przez lokalizację docelową.  
Sieć szkieletowa pamięci masowej  
Jest to sieć oparta na protokole IP umożliwiająca połączenie lokalizacji docelowej iSCSI z  
inicjatorem iSCSI. Sieć szkieletowa pamięci masowej to zwykle gigabitowa sieć lokalna (LAN –  
local area network).  
2.1.2  
Składniki oprogramowania Microsoft iSCSI Software Target  
Pakiet Microsoft iSCSI Software Target zawiera trzy składniki:  
Microsoft iSCSI Software Target – ten składnik umożliwia tworzenie i zarządzanie  
dyskami wirtualnymi oraz lokalizacjami docelowymi iSCSI, a także obsługę kopii  
zapasowych i odzyskiwania lokalizacji docelowych iSCSI za pomocą migawek.  
Volume Shadow Copy Service (VSS) Hardware Provider – oprogramowanie VSS  
Hardware Provider jest instalowane na komputerze-inicjatorze i współpracuje z usługą  
VSS w celu zapewnienia spójnych migawek dysków wirtualnych iSCSI na komputerze z  
oprogramowaniem Microsoft iSCSI Software Target.  
Bosch Sicherheitssysteme GmbH  
Instrukcja obsługi oprogramowania  
Doc | V1 | 2010.09  
       
92 pl | Przegląd systemu  
1200 and 1400 Series iSCSI Disk Arrays  
Virtual Disk Service (VDS) Hardware Provider – oprogramowanie VDS Hardware  
Provider jest instalowane na komputerze-inicjatorze i umożliwia aplikacjom obsługującym  
VDS zarządzanie dyskami wirtualnymi urządzenia pamięci masowej z oprogramowaniem  
Microsoft iSCSI Software Target.  
Uwaga  
Inicjator Microsoft iSCSI nie może się łączyć z oprogramowaniem Microsoft iSCSI Software  
Target uruchomionym na tym samym komputerze. Macierze dyskowe Bosch iSCSI oparte na  
systemie Microsoft Windows Storage Server 2008 korzystają wyłącznie z funkcji lokalizacji  
docelowych iSCSI. W zintegrowanych rozwiązaniach pamięci masowej Bosch z macierzami  
dyskowymi, na których działają aplikacje Bosch, dostępny jest oddzielny inicjator iSCSI  
umożliwiający nawiązanie połączenia z tą samą lokalizacją docelową.  
Doc | V1 | 2010.09  
Instrukcja obsługi oprogramowania  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Konfigurowanie systemu | pl  
93  
3
Konfigurowanie systemu  
W tym rozdziale zawarto informacje dotyczące czynności przygotowujących urządzenia iSCSI  
do użytkowania. Bezpośrednio po zakupieniu urządzenia iSCSI nie ma potrzeby wykonywania  
tych czynności, ponieważ wszystkie macierze dyskowe Bosch DLA są dostarczane z fabrycznie  
zainstalowanym i skonfigurowanym oprogramowaniem. Jednak niektóre operacje związane z  
konfiguracją należy wykonać ponownie po wymianie dysków twardych bez zabezpieczeń RAID  
w urządzeniu iSCSI.  
3.1  
3.2  
Wyłączanie usługi Windows Update  
Aby wyłączyć usługę Windows Update:  
1. Otwórz Server Manager.  
2. W sekcji Security Information kliknąć kolejno Configure Updates, Change Settings, a  
następnie zaznaczyć opcję Never check for updates.  
3. Kliknąć przycisk OK.  
Konfigurowanie zapory systemu Windows na potrzeby  
programu iSCSI Software Target  
Zaporę systemu Windows należy skonfigurować w taki sposób, aby umożliwić przepływ  
odpowiedniego ruchu w sieci. Poniższa tabela zawiera listę wymaganych portów.  
Port lub aplikacja  
TCP 3260  
Opis  
Usługa Microsoft iSCSI Software Target. Ten port  
zapewnia podstawowy dostęp do programu Microsoft  
iSCSI Software Target.  
TCP 135  
UDP 138  
Remote Procedure Call (RPC) – ten port jest wymagany do  
komunikacji typu Component Object Model (COM).  
NetBIOS Datagram Service – ten wyjątek powinien już  
istnieć dla roli Usługi plików i drukowania. Jeżeli nie jest  
obecny, konieczne może być jego ręczne dodanie.  
%windir%\System32\Wintarg Usługa Microsoft iSCSI Software Target  
et.exe  
%windir%\System32\WTStatu Proxy stanu usługi Microsoft iSCSI Software Target  
sProxy.exe  
Uwaga  
W przypadku próby zdalnego zarządzania programem Microsoft iSCSI Software Target, bez  
wcześniejszego skonfigurowania wyjątku zapory systemu Windows dla elementu  
WTStatusProxy.exe, mogą wystąpić błędy zdalnego wywołania procedury (RPC).  
Poniższa tabela zawiera wyjątki zapory systemu Windows, które należy skonfigurować na  
komputerze-inicjatorze iSCSI.  
Wyjątek dotyczący aplikacji  
Opis  
%windir%\System32\Wtvds.exe  
Microsoft iSCSI Software Target VDS Hardware  
Provider  
Aby dodać regułę filtra ruchu przychodzącego dla programu:  
1. Otworzyć okno Zapora systemu Windows z zabezpieczeniami zaawansowanymi. W oknie  
Menedżer serwera rozwinąć kolejno węzły Konfiguracja i Zapora systemu Windows z  
Bosch Sicherheitssysteme GmbH  
Instrukcja obsługi oprogramowania  
Doc | V1 | 2010.09  
     
94 pl | Konfigurowanie systemu  
1200 and 1400 Series iSCSI Disk Arrays  
zabezpieczeniami zaawansowanymi, a następni kliknąć pozycję Reguły ruchu  
przychodzącego.  
2. W okienku Akcje kliknąć pozycję Nowa reguła.  
3. W obszarze Regułę jakiego typu chcesz utworzyć? kliknąć opcję Program, a następnie  
kliknąć przycisk Dalej.  
4. Kliknąć przycisk Przeglądaj, przejść do folderu %windir%\System32, a następnie kliknąć  
pozycję Wintarget.exe. Kliknąć przycisk Otwórz, a następnie Dalej.  
5. Kliknąć opcję Zezwalaj na połączenie, a następnie kliknąć przycisk Dalej.  
6. Wybrać lokalizacje sieciowe, których powinna dotyczyć ta reguła (opcje wybrane  
domyślnie to Domena, Prywatne i Publiczne). Kliknąć przycisk Dalej.  
7. W polu Nazwa wpisać opisową nazwę reguły. Na przykład wpisać Usługa Microsoft iSCSI  
Software Target dla reguły programu Wintarget.exe. Kliknąć przycisk Zakończ.  
Aby dodać regułę filtra ruchu przychodzącego dla portu:  
1. Otworzyć okno Zapora systemu Windows z zabezpieczeniami zaawansowanymi. W oknie  
Menedżer serwera rozwinąć kolejno węzły Konfiguracja i Zapora systemu Windows z  
zabezpieczeniami zaawansowanymi, a następni kliknąć pozycję Reguły ruchu  
przychodzącego.  
2. W okienku Akcje kliknąć pozycję Nowa reguła.  
3. W obszarze Regułę jakiego typu chcesz utworzyć? kliknąć opcję Port, a następnie  
kliknąć przycisk Dalej.  
4. Wybrać protokół dla tej reguły: TCP lub UDP. W obszarze Czy ta reguła dotyczy  
wszystkich portów lokalnych, czy określonych portów lokalnych? kliknąć opcję  
Określone porty lokalne w wpisać odpowiedni numer portu.  
5. Kliknąć opcję Zezwalaj na połączenie, a następnie kliknąć przycisk Dalej.  
6. Wybrać lokalizacje sieciowe, których powinna dotyczyć ta reguła (opcje wybrane  
domyślnie to Domena, Prywatne i Publiczne). Kliknąć przycisk Dalej.  
7. W polu Nazwa wpisać opisową nazwę reguły. Na przykład wpisać Zdalne wywołanie  
procedury w przypadku komunikacji RPC przez port TCP 135. Kliknąć przycisk Zakończ.  
Aby skonfigurować ustawienia zapory systemu Windows z poziomu wiersza poleceń przy  
użyciu następującego przykładowego skryptu:  
1. netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-TCP-3260" dir=in action=allow protocol=TCP  
localport=3260netsh advfirewall firewall add rule name="Microsoft iSCSI  
Software Target Service-TCP-135" dir=in action=allow protocol=TCP  
localport=135  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-UDP-138" dir=in action=allow protocol=UDP localport=138  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service" dir=in action=allow  
program="%SystemRoot%\System32\WinTarget.exe" enable=yesnetsh  
advfirewall firewall add rule name="Microsoft iSCSI Software Target  
Service Status Proxy" dir=in action=allow  
program="%SystemRoot%\System32\WTStatusProxy.exe" enable=yes  
Doc | V1 | 2010.09  
Instrukcja obsługi oprogramowania  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Konfigurowanie lokalizacji docelowych iSCSI | pl  
95  
4
Konfigurowanie lokalizacji docelowych iSCSI  
Dyski tworzone przy użyciu programu iSCSI Software Target to wirtualne dyski iSCSI, czyli  
pliki w stałym formacie wirtualnego dysku twardego (VHD – virtual hard disk).  
W celu skonfigurowania lokalizacji docelowych iSCSI należy wykonać następujące czynności:  
4.1  
Tworzenie lokalizacji docelowej iSCSI  
1. Kliknąć przycisk Start i polecenie Menedżer serwera.  
2. Rozwinąć kolejno węzły Magazyn i Microsoft iSCSI Software Target, a następnie kliknąć  
pozycję Obiekty docelowe iSCSI.  
3. Kliknąć prawym przyciskiem myszy pozycję Obiekty docelowe iSCSI i kliknąć polecenie  
Utwórz lokalizacje docelowe iSCSI.  
Zostanie wyświetlone okno dialogowe Kreator tworzenia obiektów docelowych iSCSI.  
4. Kliknąć przycisk Dalej >.  
5. W polu Nazwa obiektu docelowego iSCSI wpisać odpowiednią nazwę.  
Można również wpisać opis nowej lokalizacji iSCSI.  
Kliknąć przycisk Dalej >.  
6. W polu Identyfikator IQN wpisać *.  
Bosch Sicherheitssysteme GmbH  
Instrukcja obsługi oprogramowania  
Doc | V1 | 2010.09  
     
96 pl | Konfigurowanie lokalizacji docelowych iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
7. Kliknąć przycisk Dalej >.  
8. Kliknąć przycisk Zakończ.  
Lokalizacja docelowa iSCSI zostanie dodana do listy Obiekty docelowe iSCSI w  
Menedżerze serwera.  
Uwaga: należy utworzyć tylko jedną lokalizację docelową iSCSI, ponieważ wszystkie  
obiekty LUN powinny się znajdować w jednej konfiguracji docelowej.  
4.2  
Tworzenie woluminu prostego  
1. Uruchomić Menedżer serwera.  
2. Rozwinąć węzeł Magazyn, a następnie kliknąć pozycję Zarządzanie dyskami.  
Doc | V1 | 2010.09  
Instrukcja obsługi oprogramowania  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Konfigurowanie lokalizacji docelowych iSCSI | pl  
97  
3. Kliknąć prawym przyciskiem myszy opcję Dysk 1, a następnie opcję Online.  
4. Kliknąć prawym przyciskiem myszy nieprzydzielone miejsce na dysku dynamicznym, na  
którym ma zostać utworzony wolumin prosty, a następnie kliknąć opcję Nowy wolumin  
prosty.  
5. W oknie Kreator nowych woluminów prostych kliknąć przycisk Dalej>.  
6. W oknie dialogowym Określ rozmiar woluminu pozostawić ustawienia domyślne bez  
zmian i kliknąć przycisk Dalej>.  
7. W oknie dialogowym Przypisz literę dysku lub ścieżkę wprowadzić odpowiednią literę  
dysku i kliknąć przycisk Dalej>.  
8. W oknie dialogowym Formatuj partycję kliknąć opcję Formatuj ten wolumin z  
następującymi ustawieniami, aby ją zaznaczyć.  
Na liście System plików zaznaczyć pozycję NTFS.  
Na liście Rozmiar jednostki alokacji wybrać pozycję 64 K.  
W polu Etykieta woluminu wpisać opis nowego woluminu.  
Zaznaczyć opcję Wykonaj szybkie formatowanie.  
Kliknąć przycisk Dalej >.  
Zostanie wyświetlone końcowe okno dialogowe narzędzia Kreator nowych woluminów  
prostych.  
Bosch Sicherheitssysteme GmbH  
Instrukcja obsługi oprogramowania  
Doc | V1 | 2010.09  
98 pl | Konfigurowanie lokalizacji docelowych iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
9. Sprawdzić ustawienia i kliknąć przycisk Zakończ.  
4.3  
Tworzenie dysku wirtualnego  
1. Uruchomić Menedżer serwera.  
2. Rozwinąć kolejno węzły Magazyn, Microsoft iSCSI Software Target i Obiekty docelowe  
iSCSI, a następnie kliknąć prawym przyciskiem myszy dodaną już lokalizację docelową  
iSCSI.  
3. Kliknąć opcję Utwórz dysk wirtualny dla obiektu docelowego iSCSI.  
4. W oknie dialogowym Kreator tworzenia dysku wirtualnego kliknąć przycisk Dalej>.  
Doc | V1 | 2010.09  
Instrukcja obsługi oprogramowania  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Konfigurowanie lokalizacji docelowych iSCSI | pl  
99  
5. W oknie dialogowym Plik wpisać pełną nazwę pliku. Należy wprowadzić również  
rozszerzenie .vhd.  
6. Kliknąć przycisk Dalej >.  
7. W oknie dialogowym Rozmiar wpisać rozmiar nowego dysku wirtualnego (w MB). Aby  
uzyskać jak największą wartość, wprowadzić wartość z pola Dostępne wolne miejsce  
pomnożoną przez 1024.  
Uwaga:  
Rozmiar pliku .vhdjest równy rozmiarowi obiektu LUN i nie może przekraczać 2 TB, jako  
że oprogramowanie układowe BVIP obsługuje obiekty LUN o maksymalnym rozmiarze  
2 TB.  
8. Kliknąć przycisk Dalej >.  
Zostanie utworzony dysk wirtualny.  
Procedura opisana w tym rozdziale umożliwia dodawanie kolejnych dysków aż do  
momentu wyczerpania się miejsca na dysku twardym.  
Macierz dyskowa została pomyślnie skonfigurowana i można jej używać do odpowiednich  
zastosowań iSCSI.  
4.4  
Modyfikowanie ustawień LUN iSCSI  
Jeżeli zachodzi konieczność zmiany ustawień LUN, należy najpierw usunąć obiekt LUN i  
ponownie je skonfigurować.  
Aby usunąć obiekt LUN:  
1. Uruchomić Menedżer serwera.  
Bosch Sicherheitssysteme GmbH  
Instrukcja obsługi oprogramowania  
Doc | V1 | 2010.09  
   
100 pl | Konfigurowanie lokalizacji docelowych iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
2. Kliknąć prawym przyciskiem myszy dysk wirtualny (=LUN), a następnie polecenie Usuń  
dysk wirtualny.  
3. Kliknąć przycisk Tak, aby potwierdzić wyświetlony komunikat ostrzegawczy.  
4. Aby zwolnić pojemność, usunąć ręcznie plik .vhdw Eksploratorze Windows.  
Teraz można zmienić konfigurację obiektu LUN zgodnie z sekcjami 4.1 - 4.3 .  
Doc | V1 | 2010.09  
Instrukcja obsługi oprogramowania  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Índice | pt 101  
Índice  
Informação resumida  
Vista geral do sistema  
Descrição geral do iSCSI  
Componentes da rede iSCSI  
Componentes do Microsoft iSCSI Software Target  
Configurar o sistema  
Desactivar a actualização do Windows  
Configurar a firewall do Windows para o iSCSI Software Target  
Configurar os destinos iSCSI  
Criar um destino iSCSI  
Criar um volume simples  
Criar um disco virtual  
Modificar as definições LUN do iSCSI  
Bosch Sicherheitssysteme GmbH  
Manual do software  
Doc | V1 | 2010.09  
 
102 pt | Informação resumida  
1200 and 1400 Series iSCSI Disk Arrays  
1
Informação resumida  
O endereço IP predefinido do dispositivo é 10.10.10.10 na primeira porta  
Todos os conjuntos de discos da série DLA da Bosch estão pré-configurados com um  
endereço IP predefinido e pré-definições iSCSI.  
As pré-definições iSCSI estão optimizadas para utilização com sistema VRM. Unicamente um  
administrador de armazenamento experiente deverá alterar estas definições. Os seguintes  
passos de configuração apenas são necessários se o sistema VRM não estiver a ser utilizado  
ou se as pré-definições não forem adequadas para outra aplicação iSCSI da Bosch.  
Os sistemas operativos do servidor de armazenamento do Windows 2008 da Microsoft  
fornecem uma interface do utilizador para a configuração inicial do servidor, gestão unificada  
de aplicações de armazenamento, configuração simples e gestão de armazenamento e de  
pastas partilhadas, e suporte para o Microsoft iSCSI Software Target. Está especialmente  
configurado para proporcionar um desempenho optimizado em armazenamento ligado à rede.  
O servidor de armazenamento do Windows 2008 oferece melhorias significativas em  
contextos de gestão de partilha e de armazenamento, assim como a integração de  
componentes e funcionalidades de gestão de aplicações de armazenamento.  
Doc | V1 | 2010.09  
Manual do software  
Bosch Sicherheitssysteme GmbH  
 
1200 and 1400 Series iSCSI Disk Arrays  
Vista geral do sistema | pt 103  
2
Vista geral do sistema  
Com o Microsoft iSCSI Software Target no servidor de armazenamento do Windows 2008,  
pode criar e gerir destinos iSCSI, criar e gerir discos virtuais para armazenamento, e  
implementar suporte para cópias de segurança e recuperação através de imagens paradas.  
Nota  
O Microsoft iSCSI Software Target vem pré-instalado e pré-configurado em todos os modelos  
DLA da Bosch. Se não vier instalado ou fornecido com a sua aplicação de armazenamento,  
contacte o fabricante para obter informações sobre como adquirir o Microsoft iSCSI Software  
Target.  
2.1  
Descrição geral do iSCSI  
Estão disponíveis diversos protocolos, tais como o ATA (SATA) e o SCSI (SAS), que permitem  
que um controlador de disco comunique com as unidades de disco. Estes protocolos são  
normas predefinidas que determinam de que forma os comandos, tais como pedidos de  
leitura e escrita, são encapsulados e enviados entre o controlador e a unidade de disco. O  
protocolo iSCSI alarga as normas SCSI ao encapsular comandos SCSI em pacotes TCP/IP.  
Estes comandos são enviados através de uma rede TCP/IP, que permite que os servidores  
acedam ao armazenamento numa rede de área de armazenamento (SAN). Isto facilita a  
implementação e a gestão centralizada de armazenamento consolidado, incluindo cópia de  
segurança centralizada e recuperação por sistema remoto.  
2.1.1  
Componentes da rede iSCSI  
Numa rede iSCSI, existem três componentes:  
Destino iSCSI  
O destino iSCSI proporciona armazenamento similar ao das unidades de disco de  
armazenamento ligadas localmente, mas com acesso através de uma rede em vez de  
localmente. Esta funcionalidade é fornecida pelo servidor de armazenamento do Windows  
2008 através do Microsoft iSCSI Software Target.  
Iniciador iSCSI  
Muitas vezes, o iniciador iSCSI é referido como sendo o cliente. O destino iSCSI proporciona  
armazenamento ao iniciador iSCSI, que age como controlador de discos para os discos  
hospedados no destino.  
Estrutura de armazenamento  
Trata-se de uma rede baseada num Protocolo de Internet (IP) que liga o destino iSCSI ao  
iniciador iSCSI. A estrutura de armazenamento é normalmente uma rede local (LAN) de  
gigabits.  
2.1.2  
Componentes do Microsoft iSCSI Software Target  
O pacote do Microsoft iSCSI Software Target é constituído por três elementos:  
Microsoft iSCSI Software Target – Este componente permite-lhe criar e gerir discos  
virtuais, criar e gerir destinos iSCSI e fornecer cópias de segurança e recuperação de  
destinos iSCSI através de imagens paradas.  
Fornecedor de hardware Volume Shadow Copy Service (VSS) – O fornecedor de  
hardware VSS vem instalado no computador iniciador e funciona com o serviço VSS para  
fornecer imagens paradas consistentes de discos virtuais iSCSI no computador que  
executa o Microsoft iSCSI Software Target.  
Fornecedor de hardware Virtual Disk Service (VDS) – O fornecedor de hardware VDS  
vem instalado num computador iniciador e permite que aplicações que reconhecem VDS  
Bosch Sicherheitssysteme GmbH  
Manual do software  
Doc | V1 | 2010.09  
       
104 pt | Vista geral do sistema  
1200 and 1400 Series iSCSI Disk Arrays  
administrem discos virtuais numa aplicação de armazenamento que execute o Microsoft  
iSCSI Software Target.  
Nota  
Não é possível ligar o iniciador iSCSI da Microsoft a um Microsoft iSCSI Software Target que  
esteja a ser executado no mesmo computador. Os conjuntos de discos iSCSI da Bosch com  
base no servidor de armazenamento do Windows 2008 da Microsoft utilizam apenas a  
funcionalidade de destino iSCSI. As soluções de armazenamento tudo-em-um da Bosch que  
executem uma aplicação Bosch no conjunto de armazenamento fornecem o seu próprio  
iniciador iSCSI que se pode ligar ao mesmo destino.  
Doc | V1 | 2010.09  
Manual do software  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Configurar o sistema | pt 105  
3
Configurar o sistema  
Este capítulo providencia informações sobre como preparar o dispositivo iSCSI antes da sua  
utilização. Estas tarefas já foram executadas no dispositivo iSCSI que acaba de comprar, uma  
vez que todos os conjuntos de discos DLA da Bosch vêm pré-instalados e pré-configurados.  
No entanto, se alterar discos rígidos não protegidos por RAID num dispositivo iSCSI, terá de  
efectuar novamente algumas destas tarefas de configuração.  
3.1  
3.2  
Desactivar a actualização do Windows  
Para desactivar a actualização do Windows:  
1. Abrir Server Manager.  
2. Na secção Security Information , clique em Configure Updates, clique em Change  
Settings e clique para confirmar Never check for updates.  
3. Clique em OK.  
Configurar a firewall do Windows para o iSCSI Software Target  
Deverá configurar a firewall do Windows para permitir a passagem do tráfego de rede  
necessário. A seguinte tabela apresenta uma lista das portas necessárias.  
Porta ou aplicação  
TCP 3260  
Descrição  
Microsoft iSCSI Software Target Service. Esta porta  
providencia acesso primário ao Microsoft iSCSI Software  
target.  
TCP 135  
UDP 138  
Chamada de procedimento remoto (RPC). Esta porta é  
necessária para comunicação do Component Object Model  
(COM).  
Serviço de datagrama NetBIOS. Esta excepção já deverá  
existir para as funções de Ficheiro e Serviço de Impressão,  
mas poderá ter de ser adicionado manualmente caso não  
exista.  
%windir%\System32\Wintarg Microsoft iSCSI Software Target Service  
et.exe  
%windir%\System32\WTStatu Estado proxy do Microsoft iSCSI Software Target  
sProxy.exe  
Nota  
Poderá receber erros de chamada de procedimento remoto (RPC) ao tentar gerir  
remotamente o Microsoft iSCSI Software Target se não configurar a excepção de firewall do  
Windows para WTStatusProxy.exe.  
A seguinte tabela apresenta as excepções de firewall do Windows que devem ser  
estabelecidas no computador do iniciador iSCSI.  
Excepção da aplicação  
Descrição  
%windir%\System32\Wtvds.exe  
O fornecedor de hardware VDS do Microsoft iSCSI  
Software Target  
Para adicionar uma regra de filtragem de entrada para um programa:  
1. Abra a firewall do Windows com segurança avançada. No Gestor de servidores, expanda  
a Configuração, expanda Firewall do Windows com segurança avançada e depois clique  
em Regras de entrada.  
Bosch Sicherheitssysteme GmbH  
Manual do software  
Doc | V1 | 2010.09  
     
106 pt | Configurar o sistema  
1200 and 1400 Series iSCSI Disk Arrays  
2. No painel de Acções, clique em Nova regra.  
3. Em Que tipo de regra deseja criar, clique em Programa e depois clique em Seguinte.  
4. Clique em Procurar, procure na pasta %windir%\System32, e depois clique em  
Wintarget.exe. Clique em Abrir e depois em Seguinte.  
5. Clique em Autorizar a ligação e depois clique em Seguinte.  
6. Escolha os locais da rede que devem submeter-se a esta regra (o predefinido é Domínio,  
Privado e Público). Clique em Seguinte.  
7. Em Nome, introduza um nome descritivo para a regra. Por exemplo, introduza Microsoft  
iSCSI Software Target Service para a regra de programa para Wintarget.exe. Clique em  
Concluir.  
Para adicionar uma regra de filtragem de entrada para uma porta:  
1. Abra a firewall do Windows com segurança avançada. No Gestor de servidores, expanda  
a Configuração, expanda Firewall do Windows com segurança avançada e depois clique  
em Regras de entrada.  
2. No painel de Acções, clique em Nova regra.  
3. Em Que tipo de regra deseja criar, clique em Porta e depois clique em Seguinte.  
4. Escolha o protocolo para esta regra, TCP ou UDP. Em Esta regra aplica-se a todas as  
portas locais ou a portas locais específicas?, clique em Portas locais específicas e  
introduza o respectivo número da porta.  
5. Clique em Autorizar a ligação e depois clique em Seguinte.  
6. Escolha os locais da rede que devem submeter-se a esta regra (o predefinido é Domínio,  
Privado e Público). Clique em Seguinte.  
7. Em Nome, introduza um nome descritivo para a regra. Por exemplo, introduza Chamada  
de Procedimento Remoto para a comunicação RPC na porta TPC 135. Clique em  
Concluir.  
Para configurar as definições da firewall do Windows a partir da linha de comando com a  
seguinte amostra de script:  
1. netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-TCP-3260" dir=in action=allow protocol=TCP  
localport=3260netsh advfirewall firewall add rule name="Microsoft iSCSI  
Software Target Service-TCP-135" dir=in action=allow protocol=TCP  
localport=135  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-UDP-138" dir=in action=allow protocol=UDP localport=138  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service" dir=in action=allow  
program="%SystemRoot%\System32\WinTarget.exe" enable=yesnetsh  
advfirewall firewall add rule name="Microsoft iSCSI Software Target  
Service Status Proxy" dir=in action=allow  
program="%SystemRoot%\System32\WTStatusProxy.exe" enable=yes  
Doc | V1 | 2010.09  
Manual do software  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Configurar os destinos iSCSI | pt 107  
4
Configurar os destinos iSCSI  
Os discos que criar através do iSCSI Software Target são discos virtuais iSCSI, que consistem  
em ficheiros no formato de disco rígido virtual (VHD) fixo.  
Deve executar as seguintes tarefas para configurar os seus destinos iSCSI:  
4.1  
Criar um destino iSCSI  
1. Clique em Iniciar e clique em Gestor de servidores.  
2. Expanda Armazenamento, expanda Microsoft iSCSI Software Target e depois clique em  
Destinos iSCSI.  
3. Clique com o botão direito em Destinos iSCSI e clique em Criar destinos iSCSI.  
A caixa de diálogo do Assistente de criação de destinos iSCSI é apresentada.  
4. Clique em Seguinte>.  
5. No campo nome de destino iSCSI, introduza o nome pretendido.  
Se pretendido, introduza a descrição do novo destino iSCSI.  
Clique em Seguinte>.  
6. No campo identificador IQN introduza *.  
Bosch Sicherheitssysteme GmbH  
Manual do software  
Doc | V1 | 2010.09  
     
108 pt | Configurar os destinos iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
7. Clique em Seguinte>.  
8. Clique em Concluir.  
O destino iSCSI é adicionado à lista de destinos iSCSI do Gestor de servidores.  
Nota: apenas é necessário criar um destino iSCSI, uma vez que todos os LUNs devem ser  
colocados numa configuração de destino.  
4.2  
Criar um volume simples  
1. Inicie o Gestor de servidores.  
2. Expanda Armazenamento e depois clique em Gestão do Disco.  
Doc | V1 | 2010.09  
Manual do software  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Configurar os destinos iSCSI | pt 109  
3. Clique com o botão direito em Disco 1 e clique em Online.  
4. Clique com o botão direito no espaço não atribuído do disco dinâmico no qual deseja  
criar o volume simples e depois clique em Novo volume simples.  
5. No Assistente de novo volume simples, clique em Seguinte>.  
6. Na caixa de diálogo Especificar tamanho de volume, mantenha as pré-definições e clique  
em Seguinte>.  
7. Na caixa de diálogo Atribuir letra ou caminho da unidade, introduza a letra da unidade  
pretendida e depois clique em Seguinte>.  
8. Na caixa de diálogo Formatar partição, clique para confirmar Formatar este volume com  
as seguintes definições.  
Na lista de Sistema de ficheiros, seleccione NTFS.  
Na lista de Tamanho de unidade de atribuição, seleccione 64 K.  
No campo Etiqueta de volume, introduza uma descrição para o novo volume.  
Clique para confirmar Efectuar uma formatação rápida.  
Clique em Seguinte>.  
A caixa de diálogo final do Assistente de novo volume simples é apresentada.  
Bosch Sicherheitssysteme GmbH  
Manual do software  
Doc | V1 | 2010.09  
110 pt | Configurar os destinos iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
9. Confirme as suas definições e clique em Concluir.  
4.3  
Criar um disco virtual  
1. Iniciar o Gestor de servidores.  
2. Expanda Armazenamento, expanda Microsoft iSCSI Software Target, expanda destinos  
iSCSI e depois clique com o botão direito no destino iSCSI que já adicionou.  
3. Clique em Criar disco virtual para destino iSCSI.  
4. No Assistente de criação de disco virtual, clique em Seguinte>.  
Doc | V1 | 2010.09  
Manual do software  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Configurar os destinos iSCSI | pt 111  
5. Na caixa de diálogo Ficheiro, introduza um nome de ficheiro totalmente qualificado.  
Utilize também a extensão .vhd.  
6. Clique em Seguinte>.  
7. Na caixa de diálogo Tamanho, introduza o tamanho do novo disco virtual em MB. Para o  
valor máximo, introduza o valor do Espaço livre actualmente disponível multiplicado por  
1024.  
Nota:  
O tamanho do ficheiro .vhdé igual ao tamanho do LUN e não pode ultrapassar 2 TB, uma  
vez que o BVIP firmware suporta um tamanho de LUN até 2 TB.  
8. Clique em Seguinte>.  
O disco virtual foi criado.  
Com o procedimento descrito neste capítulo poderá adicionar a quantidade de discos  
que pretender até atingir a capacidade física máxima do disco duro.  
O conjunto de discos foi agora configurado com sucesso e poderá utilizá-lo para as  
respectivas aplicações iSCSI.  
4.4  
Modificar as definições LUN do iSCSI  
Quando tiver de alterar as suas definições LUN, terá primeiro de eliminar os LUNs e só depois  
reconfigurá-los.  
Para eliminar um LUN:  
1. Inicie o Gestor de servidores.  
Bosch Sicherheitssysteme GmbH  
Manual do software  
Doc | V1 | 2010.09  
   
112 pt | Configurar os destinos iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
2. Clique com o botão direito no disco virtual (=LUN) e clique em Eliminar disco virtual.  
3. Clique em Sim para confirmar a seguinte mensagem de aviso.  
4. Para libertar capacidade de forma efectiva, elimine o ficheiro .vhdmanualmente no  
Windows Explorer.  
Agora poderá reconfigurar os seus LUNs de acordo com as secções 4.1 - 4.3 .  
Doc | V1 | 2010.09  
Manual do software  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Содержание | ru 113  
Содержание  
Краткая информация  
Обзор системы  
Обзор iSCSI  
Компоненты iSCSI-сети  
Компоненты Microsoft iSCSI Software Target  
Настройка системы  
Отключение Центра обновления Windows  
Настройка брандмауэра Windows для iSCSI Software Target  
Настройка получателей iSCSI  
Создание получателя iSCSI  
Создание простого тома  
Создание виртуального диска  
Изменение параметров iSCSI LUN  
Bosch Sicherheitssysteme GmbH  
Руководство для программного обеспечения  
Doc | V1 | 2010.09  
 
114 ru | Краткая информация  
1200 and 1400 Series iSCSI Disk Arrays  
1
Краткая информация  
IP-адрес устройства по умолчанию: 10.10.10.10 на первом порту  
Во всех дисковых массивах серии Bosch DLA предварительно настроены IP-адрес по  
умолчанию и стандартные параметры iSCSI.  
Стандартные параметры iSCSI оптимизированы для использования с диспетчером  
видеозаписи (VRM). Только опытный администратор системы хранения данных должен  
изменять эти параметры. Описанные ниже действия по настройке требуются, только если  
не используется диспетчер видеозаписи или если стандартные настройки не подходят для  
другого iSCSI-приложения Bosch.  
Операционные системы Microsoft Windows Storage Server 2008 предоставляют интерфейс  
пользователя для исходной настройки сервера, унифицированного управления  
устройствами хранения данных, упрощенной настройки и управления хранилищем и  
общими папками, а также для поддержки Microsoft iSCSI Software Target. Он специально  
настроен для обеспечения оптимальной производительности подключенного к сети  
хранилища данных. Windows Storage Server 2008 предоставляет значительные улучшения  
в отношении сценариев управления общим доступом и хранением, а также интеграции  
компонентов управления и функциональных возможностей устройств хранения данных.  
Doc | V1 | 2010.09  
Руководство для программного обеспечения  
Bosch Sicherheitssysteme GmbH  
 
1200 and 1400 Series iSCSI Disk Arrays  
Обзор системы | ru 115  
2
Обзор системы  
Microsoft iSCSI Software Target в Windows Storage Server 2008 позволяет создавать  
получателей iSCSI и управлять ими, создавать и управлять виртуальными дисками  
хранилища, а также реализовывать поддержку резервного копирования и  
восстановления, используя снимки.  
Замечание  
Служба Microsoft iSCSI Software Target предварительно установлена и настроена на всех  
моделях Bosch DLA. Если она не установлена или не предоставлена вместе с вашим  
устройством хранения данных, обратитесь к производителю своего устройства хранения  
данных за информацией о получении Microsoft iSCSI Software Target.  
2.1  
Обзор iSCSI  
Для обмена данными между дисковым контроллером и жесткими дисками доступно  
несколько протоколов, таких как ATA (SATA) и SCSI (SAS). Эти протоколы являются  
предварительно определенными стандартами, которые определяют упаковку и пересылку  
между контроллером и жестким дисками таких команд, как запросы чтения и записи.  
Протоколы iSCSI расширяют стандарты SCSI путем инкапсуляции SCSI-команд в TCP/IP-  
пакетах. Такие команды отправляются по TCP/IP-сети, которая предоставляет серверам  
доступ к хранилищам в сетях хранения данных. Это облегчает реализацию  
консолидированного хранилища и централизованное управление им, включая  
централизованное резервное копирование и удаленное восстановление системы.  
2.1.1  
Компоненты iSCSI-сети  
В iSCSI-сети имеется три компонента.  
Получатель iSCSI  
Получатель iSCSI предоставляет хранилище, подобное жестким дискам подключенного  
локально хранилища, но с доступом по сети, а не локально. В Windows Storage Server  
2008 эта функциональная возможность предоставляется службой Microsoft iSCSI Software  
Target.  
Инициатор iSCSI  
Инициатор iSCSI иногда называется клиентом. Получатель iSCSI предоставляет  
хранилище инициатору iSCSI, который для дисков получателя действует как дисковый  
контроллер.  
Фабрика хранения  
Это сеть на основе протокола Internet Protocol (IP), связывающая получателя iSCSI и  
инициатора iSCSI. Фабрика хранения обычно представляет собой гигабитную локальную  
сеть.  
2.1.2  
Компоненты Microsoft iSCSI Software Target  
Пакет Microsoft iSCSI Software Target содержит три компонента.  
Microsoft iSCSI Software Target: этот компонент позволяет создавать виртуальные  
диски и управлять ими, создавать получателей iSCSI и управлять ими, а также  
обеспечивает резервное копирование и восстановление получателей iSCSI с  
помощью снимков.  
Поставщик оборудования службы теневого копирования тома: этот компонент  
установлен на компьютере инициатора и работает со службой теневого копирования  
тома для обеспечения согласованных снимков виртуальных дисков iSCSI на  
компьютере с Microsoft iSCSI Software Target.  
Bosch Sicherheitssysteme GmbH  
Руководство для программного обеспечения  
Doc | V1 | 2010.09  
       
116 ru | Обзор системы  
1200 and 1400 Series iSCSI Disk Arrays  
Поставщик оборудования службы виртуальных дисков: данный компонент  
установлен на компьютере инициатора и позволяет поддерживающим данную службу  
приложениям управлять виртуальными дисками устройства хранения с Microsoft  
iSCSI Software Target.  
Замечание  
Инициатор iSCSI Майкрософт не может подключаться к службе Microsoft iSCSI Software  
Target, которая выполняется на том же компьютере. Дисковые массивы iSCSI компании  
Bosch, основанные на Microsoft Windows Storage Server 2008, используют только  
функциональные возможности получателя iSCSI. Универсальные системы хранения  
Bosch, для дискового массива которых выполняется приложение Bosch, предоставляют  
собственные инициаторы iSCSI, способные подключаться к тому же самому целевому  
компьютеру.  
Doc | V1 | 2010.09  
Руководство для программного обеспечения  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Настройка системы | ru 117  
3
Настройка системы  
В этой главе предоставляется информация о подготовке данного iSCSI-устройства к  
использованию. Эти задачи уже выполнены для только что приобретенного iSCSI-  
устройства, так как все дисковые массивы Bosch DLA поставляются предварительно  
установленными и настроенными. Однако в случае изменения в iSCSI-устройстве жестких  
дисков без защиты RAID может потребоваться выполнение некоторых из таких задач  
настройки.  
3.1  
3.2  
Отключение Центра обновления Windows  
Порядок отключения Центра обновления Windows  
1. Откройте Server Manager.  
2. В разделе Security Information выберите Configure Updates, Change Settings и  
установите флажок Never check for updates.  
3. Нажмите OK.  
Настройка брандмауэра Windows для iSCSI Software Target  
Требуется настроить брандмауэр Windows, чтобы разрешить прохождение необходимого  
сетевого трафика. В приведенной ниже таблице перечисляются все требуемые порты.  
Порт или приложение  
TCP 3260  
Описание  
Служба Microsoft iSCSI Software Target. Данный порт  
предоставляет основной доступ к службе Microsoft iSCSI  
Software Target.  
TCP 135  
UDP 138  
Удаленный вызов процедур (RPC), этот порт требуется  
для связи COM (Component Object Model).  
Служба датаграмм NetBIOS, это исключение уже должно  
быть задано для роли "Служба доступа к файлам и  
принтерам", однако если его нет, данное исключение  
необходимо добавить вручную.  
%windir%\System32\Wintarg Служба Microsoft iSCSI Software Target  
et.exe  
%windir%\System32\WTStatu Прокси-сервер состояния Microsoft iSCSI Software  
sProxy.exe  
Target  
Замечание  
При попытке удаленного управления службой Microsoft iSCSI Software Target могут  
возникать ошибки удаленного вызова процедур, если в брандмауэре Windows не  
настроить исключение для WTStatusProxy.exe.  
Ниже приводится таблица исключений брандмауэра Windows, которые необходимо  
настроить на компьютере инициатора iSCSI.  
Исключение приложения  
Описание  
%windir%\System32\Wtvds.exe  
Поставщик оборудования службы виртуальных  
дисков Microsoft iSCSI Software Target  
Порядок добавления правила фильтра входящего трафика для программы  
1. Откройте брандмауэр Windows в режиме повышенной безопасности. В диспетчере  
сервера разверните Конфигурация, Брандмауэр Windows в режиме повышенной  
безопасности, а затем щелкните Правила входящих.  
Bosch Sicherheitssysteme GmbH  
Руководство для программного обеспечения  
Doc | V1 | 2010.09  
     
118 ru | Настройка системы  
1200 and 1400 Series iSCSI Disk Arrays  
2. На панели Действия нажмите кнопку Создать правило.  
3. В разделе Правило какого типа вы хотите создать выберите Программа, а затем  
нажмите кнопку Далее.  
4. Нажмите кнопку Обзор, перейдите к папке %windir%\System32, а затем щелкните  
Wintarget.exe. Нажмите кнопку Открыть, а затем — Далее.  
5. Выберите Разрешить подключение, а затем нажмите кнопку Далее.  
6. Выберите сетевые места, которые должны быть связаны с данным правилом (по  
умолчанию это "Домен", "Частный" и "Публичный"). Нажмите кнопку Далее.  
7. В поле Имя введите описательное имя для данного правила. Например, введите  
Служба Microsoft iSCSI Software Target для правила для программы Wintarget.exe.  
Нажмите кнопку Готово.  
Порядок добавления правила фильтра входящего трафика для порта  
1. Откройте брандмауэр Windows в режиме повышенной безопасности. В диспетчере  
сервера разверните Конфигурация, Брандмауэр Windows в режиме повышенной  
безопасности, а затем щелкните Правила входящих.  
2. На панели Действия нажмите кнопку Создать правило.  
3. В разделе Правило какого типа вы хотите создать выберите Порт, а затем нажмите  
кнопку Далее.  
4. Выберите протокол для данного правила, TCP или UDP. В разделе Применять это  
правило ко всем локальным портам или к определенным локальным портам  
выберите Определенные локальные порты и введите соответствующий номер  
порта.  
5. Выберите Разрешить подключение, а затем нажмите кнопку Далее.  
6. Выберите сетевые места, которые должны быть связаны с данным правилом (по  
умолчанию это "Домен", "Частный" и "Публичный"). Нажмите кнопку Далее.  
7. В поле Имя введите описательное имя для данного правила. Например, введите  
Удаленный вызов процедур для обмена RPC через TCP-порт 135. Нажмите кнопку  
Готово.  
Порядок настройки параметров брандмауэра Windows из командной строки с  
помощью следующего примера сценария:  
1. netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-TCP-3260" dir=in action=allow protocol=TCP  
localport=3260netsh advfirewall firewall add rule name="Microsoft iSCSI  
Software Target Service-TCP-135" dir=in action=allow protocol=TCP  
localport=135  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-UDP-138" dir=in action=allow protocol=UDP localport=138  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service" dir=in action=allow  
program="%SystemRoot%\System32\WinTarget.exe" enable=yesnetsh  
advfirewall firewall add rule name="Microsoft iSCSI Software Target  
Service Status Proxy" dir=in action=allow  
program="%SystemRoot%\System32\WTStatusProxy.exe" enable=yes  
Doc | V1 | 2010.09  
Руководство для программного обеспечения  
Bosch Sicherheitssysteme GmbH  
1200 and 1400 Series iSCSI Disk Arrays  
Настройка получателей iSCSI | ru 119  
4
Настройка получателей iSCSI  
Диски, создаваемые с помощью iSCSI Software Target, — виртуальные диски iSCSI,  
представляющие собой файлы в фиксированном формате виртуальных жестких дисков  
(VHD).  
Для настройки получателей iSCSI необходимо выполнить указанные ниже действия.  
4.1  
Создание получателя iSCSI  
1. Нажмите кнопку Пуск и выберите Диспетчер сервера.  
2. Разверните Хранилище, Microsoft iSCSI Software Target, а затем выберите  
Получатели iSCSI.  
3. Правой кнопкой мыши щелкните Получатели iSCSI и выберите Создать получателей  
iSCSI.  
Откроется диалоговое окно Мастер создания целей iSCSI.  
4. Нажмите кнопку Далее>.  
5. В поле Имя конечного объекта iSCSI введите требуемое имя.  
При необходимости введите описание нового получателя iSCSI.  
Нажмите кнопку Далее>.  
6. В поле Идентификатор IQN введите *.  
Bosch Sicherheitssysteme GmbH  
Руководство для программного обеспечения  
Doc | V1 | 2010.09  
     
120 ru | Настройка получателей iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
7. Нажмите кнопку Далее>.  
8. Нажмите кнопку Finish.  
Получатель iSCSI добавляется в список Получатели iSCSI диспетчера сервера.  
Примечание. Необходимо создать только один получатель iSCSI, так как все номера  
LUN следует ввести в конфигурацию одного получателя.  
4.2  
Создание простого тома  
1. Запустите Диспетчер сервера.  
2. Разверните узел Хранилище, а затем выберите Управление дисками.  
Doc | V1 | 2010.09  
Руководство для программного обеспечения  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Настройка получателей iSCSI | ru 121  
3. Правой кнопкой мыши щелкните Диск 1 и выберите пункт В сети.  
4. Правой кнопкой мыши щелкните невыделенное пространство динамического диска,  
на котором требуется создать простой том, а затем нажмите кнопку Создать простой  
том.  
5. В диалоговом окне Мастер создания простых томов нажмите кнопку Далее>.  
6. В диалоговом окне Указание размера тома оставьте настройки по умолчанию без  
изменения и нажмите кнопку Далее>.  
7. В диалоговом окне Назначение буквы диска или пути введите нужную букву диска и  
нажмите кнопку Далее>.  
8. В диалоговом окне Форматирование раздела выберите Форматировать данный  
том следующим образом.  
В списке Файловая система выберите NTFS.  
В списке Размер кластера выберите 64K.  
В поле Метка тома введите описание нового тома.  
Установите флажок Быстрое форматирование.  
Нажмите кнопку Далее>.  
Откроется последнее диалоговое окно мастера создания простых томов.  
Bosch Sicherheitssysteme GmbH  
Руководство для программного обеспечения  
Doc | V1 | 2010.09  
122 ru | Настройка получателей iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
9. Проверьте свои настройки и нажмите кнопку Готово.  
4.3  
Создание виртуального диска  
1. Запустите Диспетчер сервера.  
2. Разверните узлы Хранилище, Microsoft iSCSI Software Target, Получатели iSCSI, а  
затем правой кнопкой мыши щелкните запись уже добавленного получателя iSCSI.  
3. Выберите команду Создать виртуальный диск для получателя iSCSI.  
4. В мастере создания виртуального диска нажмите кнопку Далее>.  
Doc | V1 | 2010.09  
Руководство для программного обеспечения  
Bosch Sicherheitssysteme GmbH  
   
1200 and 1400 Series iSCSI Disk Arrays  
Настройка получателей iSCSI | ru 123  
5. В диалоговом окне Файл введите полностью определенное имя файла. Также  
обязательно используйте расширение .vhd.  
6. Нажмите кнопку Далее>.  
7. В диалоговом окне Размер укажите размер нового виртуального диска в МБ. Для  
получения максимального значения введите в поле Доступное в данный момент  
свободное место значение, умноженное на 1024.  
Примечание:  
размер файла .vhdравен размеру LUN и не должен превышать 2 ТБ, так как  
микропрограмма BVIP поддерживает размер LUN до 2 ТБ.  
8. Нажмите кнопку Далее>.  
Виртуальный диск создан.  
Описанная в данной главе процедура позволяет добавить любое количество  
дополнительных дисков, пока не исчерпается емкость физического жесткого диска.  
Теперь дисковый массив успешно настроен и его можно использовать в  
соответствующих приложениях iSCSI.  
4.4  
Изменение параметров iSCSI LUN  
Чтобы изменить параметры LUN, сначала необходимо удалить LUN, а затем их заново  
настроить.  
Порядок удаления LUN  
1. Запустите Диспетчер сервера.  
Bosch Sicherheitssysteme GmbH  
Руководство для программного обеспечения  
Doc | V1 | 2010.09  
   
124 ru | Настройка получателей iSCSI  
1200 and 1400 Series iSCSI Disk Arrays  
2. Правой кнопкой мыши щелкните имя виртуального диска (=LUN) и выберите команду  
Удалить виртуальный диск.  
3. Нажмите кнопку Да, чтобы подтвердить появившееся предупреждение.  
4. Чтобы действительно освободить место на диске, вручную удалите файл .vhdв  
проводнике Windows.  
Теперь LUN можно заново настроить в соответствии с разделами 4.1 4.3 .  
Doc | V1 | 2010.09  
Руководство для программного обеспечения  
Bosch Sicherheitssysteme GmbH  
| zh 125  
1200 and 1400 Series iSCSI Disk Arrays  
目录  
简要信息  
系统概述  
iSCSI 概述  
iSCSI 网络组建  
Microsoft iSCSI Software Target 组件  
配置系统  
禁用 Windows Update  
配置 iSCSI Software Target 的 Windows 防火墙  
配置 iSCSI 目标  
创建一个 iSCSI 目标  
创建一个简单卷  
创建一个虚拟磁盘  
修改 iSCSI LUN 设置  
Bosch Sicherheitssysteme GmbH  
软件手册  
Doc | V1 | 2010.09  
 
126 zh | 简要信息  
1200 and 1400 Series iSCSI Disk Arrays  
1
简要信息  
设备的默认 IP 地址是:第一个端口为 10.10.10.10  
所有博世 DLA 系列磁盘阵列都使用默认 IP 地址和默认 iSCSI 设置进行了预先配置。  
对默认 iSCSI 设置进行优化,以便与 VRM 一起使用。只允许经验丰富的存储管理员对这些设置进行更  
改。只有在 VRM 停用,或者在默认设置不适合另一博世 iSCSI 应用程序的情况下,才需要采取以下配  
置步骤。  
Microsoft Windows Storage Server 2008 操作系统提供了初始服务器设置的用户界面、统一的存储设  
备管理、简化的存储和共享文件夹的安装和管理,并对 Microsoft iSCSI Software Target 提供支持。该  
软件进行了专门调整,以便为网络接入存储提供最佳性能。Windows Storage Server 2008 在共享和存  
储管理情景中有了明显增强,并集成了存储设备管理组件和功能性。  
Doc | V1 | 2010.09  
软件手册  
Bosch Sicherheitssysteme GmbH  
 
系统概述 | zh 127  
1200 and 1400 Series iSCSI Disk Arrays  
2
系统概述  
在 Windows Storage Server 2008 中使用 Microsoft iSCSI Software Target,可以创建和管理 iSCSI 目  
标,创建和管理用于存储的虚拟磁盘,以及使用快照实施备份和恢复支持。  
所有博世 DLA 型号均已预安装和预配置 Microsoft iSCSI Software Target。如果您的存储设备没有安装  
或提供该产品,请联系您的存储设备制造商,咨询有关获取 Microsoft iSCSI Software Target 的信息。  
2.1  
iSCSI 概述  
您可通过诸如 ATA (SATA)和 SCSI (SAS)等多个协议实现磁盘控制器与磁盘驱动器之间的通信。这  
些协议是预先定义的标准,它们确定了在控制器和磁盘驱动器之间打包和发送命令 (例如读取和写入  
请求)的方式。iSCSI 协议通过将 SCSI 命令封装在 TCP/IP 数据包中,扩展了 SCSI 标准。这些命令  
是通过 TCP/IP 网络发送的,从而使服务器能够访问存储局域网络 (SAN) 上的存储内容。这便于整合  
存储的实施和集中管理,包括集中备份和远程系统的恢复。  
2.1.1  
iSCSI 网络组建  
在 iSCSI 网络中,有三个组件:  
-
iSCSI 目标  
iSCSI 目标提供类似于本地接入存储的磁盘驱动器,但要通过网络访问 (而非本地访问此功能由  
Microsoft iSCSI Software Target 通过 Windows Storage Server 2008 提供。  
-
iSCSI 启动程序  
iSCSI 启动程序有时称作客户端。iSCSI 目标将为 iSCSI 启动程序提供存储空间,它将起到该目标所控  
制磁盘的磁盘控制器的作用。  
-
存储构架  
这是一种基于互联网协议 (IP) 的网络,能将 iSCSI 目标连接到 iSCSI 启动程序。存储构架通常是一种  
千兆位局域网 (LAN)。  
2.1.2  
Microsoft iSCSI Software Target 组件  
Microsoft iSCSI Software Target 包包括三个组件:  
-
Microsoft iSCSI Software Target – 借助该组件,您将能够创建和管理虚拟磁盘、创建和管理  
iSCSI 目标,并通过快照提供 iSCSI 目标的备份和恢复。  
-
Volume Shadow Copy Service (VSS) Hardware Provider – VSS Hardware Provider 安装在启动  
程序计算机上,并配合 VSS 服务一起工作,从而在运行 Microsoft iSCSI Software Target 的计算  
机上提供 iSCSI 虚拟磁盘的应用一致性快照。  
-
Virtual Disk Service (VDS) Hardware Provider – VDS Hardware Provider 安装在启动计算机上,  
允许 VDS 相关应用程序在运行 Microsoft iSCSI Software Target 的存储设备上管理虚拟磁盘。  
Microsoft iSCSI 启动程序不能连接到在同一计算机上运行的 Microsoft iSCSI Software Target 中。基于  
Microsoft Windows Storage Server 2008 的博世 iSCSI 磁盘阵列只能使用 iSCSI 目标功能。在存储阵  
列上运行博世应用程序的博世全能存储解决方案,提供属于自己的 iSCSI 启动程序,并通过其连接到  
同一个目标。  
Bosch Sicherheitssysteme GmbH  
软件手册  
Doc | V1 | 2010.09  
       
128 zh | 配置系统  
1200 and 1400 Series iSCSI Disk Arrays  
3
配置系统  
本章提供了有关使用前准备 iSCSI 设备的信息。这些任务已经在您所购买的 iSCSI 设备上完成,因为  
所有博世 DLA 磁盘阵列都已经预安装和预配置。但是如果您更换了 iSCSI 设备上没有受到 RAID 保护  
的硬盘,则必须再次执行一些这类配置任务。  
3.1  
3.2  
禁用 Windows Update  
要禁用 Windows Update 的步骤:  
1. 打开 Server Manager。  
2. 在 Security Information 部分,依次单击 Configure Updates Change Settings,然后单击选中  
Never check for updates。  
3. 单击 OK。  
配置 iSCSI Software Target 的 Windows 防火墙  
您必须配置 Windows 防火墙,以便让必要的网络流量通过。下表列出了所需的端口。  
端口或应用  
TCP 3260  
说明  
Microsoft iSCSI Software Target 服务。该端口提供了对  
Microsoft iSCSI Software target 的主要访问路径。  
TCP 135  
UDP 138  
远程程序调用 (RPC),组件对象模型 (COM) 通信需要该端口。  
NetBIOS 数据报服务,此例外应该已经存在于文件和打印服务功  
能中,若不存在,则可能需要手动添加。  
%windir%\System32\Wintarg Microsoft iSCSI Software Target 服务  
et.exe  
%windir%\System32\WTStatu Microsoft iSCSI Software Target 状态代理  
sProxy.exe  
在未配置 Windows 防火墙例外的情况下对 Microsoft iSCSI Software Target 进行远程管理时,可能会  
收到远程程序调用 (RPC) 错误 WTStatusProxy.exe。  
下表包含了应在 iSCSI 启动程序计算机上设置的 Windows 防火墙例外。  
应用程序例外  
说明  
%windir%\System32\Wtvds.exe  
Microsoft iSCSI Software Target VDS Hardware  
Provider  
要为程序添加入站过滤规则:  
1. 打开具有高级安全性的 Windows 防火墙。在 Server Manager 中,展开 Configuration,展开  
Windows Firewall with Advanced Security,然后单击 Inbound Rules。  
2. 在 Actions 面板中,单击 New Rule。  
3. 在 What type of rule would you like to create 下,单击 Program,然后单击 Next。  
4. 单击 Browse,浏览至 %windir%\System32文件夹,然后单击 Wintarget.exe。单击 Open,然  
后单击 Next。  
5. 单击 Allow the connection,然后单击 Next。  
6. 选择应绑定到该规则的网络位置 (默认为域、私人和公共 )。单击 Next。  
7. 在 Name 下,输入该规则的描述性名称。例如,为用于 Wintarget.exe 的程序规则输入 Microsoft  
iSCSI Software Target Service。单击 Finish。  
要为端口添加入站过滤规则:  
1. 打开具有高级安全性的 Windows 防火墙。在 Server Manager 中,展开 Configuration,展开  
Windows Firewall with Advanced Security,然后单击 Inbound Rules。  
Doc | V1 | 2010.09  
软件手册  
Bosch Sicherheitssysteme GmbH  
     
配置系统 | zh 129  
1200 and 1400 Series iSCSI Disk Arrays  
2. 在 Actions 面板中,单击 New Rule。  
3. 在 What type of rule would you like to create 下,单击 Port,然后单击 Next。  
4. 选择用于该规则的协议:TCP 还是 UDP。在 Does this rule apply to all local ports or specific  
local ports 下,单击 Specific local ports 并输入适当的端口号。  
5. 单击 Allow the connection,然后单击 Next。  
6. 选择应绑定到该规则的网络位置 (默认为域、私人和公共 )。单击 Next。  
7. 在 Name 下,输入该规则的描述性名称。例如,为 TCP 端口 135 上的 RPC 通信输入 Remote  
Procedure Call。单击 Finish。  
要通过以下样本从命令行配置 Window 防火墙设置:  
1. netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-TCP-3260" dir=in action=allow protocol=TCP  
localport=3260netsh advfirewall firewall add rule name="Microsoft iSCSI  
Software Target Service-TCP-135" dir=in action=allow protocol=TCP  
localport=135  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service-UDP-138" dir=in action=allow protocol=UDP localport=138  
netsh advfirewall firewall add rule name="Microsoft iSCSI Software  
Target Service" dir=in action=allow  
program="%SystemRoot%\System32\WinTarget.exe" enable=yesnetsh  
advfirewall firewall add rule name="Microsoft iSCSI Software Target  
Service Status Proxy" dir=in action=allow  
program="%SystemRoot%\System32\WTStatusProxy.exe" enable=yes  
Bosch Sicherheitssysteme GmbH  
软件手册  
Doc | V1 | 2010.09  
130 zh | 配置 iSCSI 目标  
1200 and 1400 Series iSCSI Disk Arrays  
4
配置 iSCSI 目标  
您使用 iSCSI Software Target 所创建的磁盘是 iSCSI 虚拟磁盘,它们实际上是固定的虚拟硬盘 (VHD)  
格式的文件。  
必须执行以下任务来配置 iSCSI 目标:  
-
-
-
-
4.1  
创建一个 iSCSI 目标  
1. 单击 Start,然后单击 Server Manager。  
2. 依次展开 Storage Microsoft iSCSI Software Target,然后单击 iSCSI Targets。  
3. 右键单击 iSCSI Targets,然后单击 Create iSCSI Targets。  
此时 Create iSCSI Target Wizard 对话框将会显示。  
4. 单击 Next>。  
5. 在 iSCSI target name 字段中,键入所需的名称。  
-
-
如果需要,输入新 iSCSI 目标的描述。  
单击 Next>。  
6. 在 IQN identifier 字段键入 *。  
Doc | V1 | 2010.09  
软件手册  
Bosch Sicherheitssysteme GmbH  
     
配置 iSCSI 目标 | zh 131  
1200 and 1400 Series iSCSI Disk Arrays  
7. 单击 Next>。  
8. 单击 Finish。  
在 Server Manager 的 iSCSI Targets 列表中添加 iSCSI 目标。  
注:只需创建一个 iSCSI 目标,因为所有 LUN 都会在一个目标配置中输入。  
4.2  
创建一个简单卷  
1. 启动 Server Manager。  
2. 展开 Storage,然后单击 Disk Management。  
Bosch Sicherheitssysteme GmbH  
软件手册  
Doc | V1 | 2010.09  
   
132 zh | 配置 iSCSI 目标  
1200 and 1400 Series iSCSI Disk Arrays  
3. 右键单击 Disk 1 并单击 Online。  
4. 右键单击您希望创建简单卷的动态磁盘上的未分配空间,然后单击 New Simple Volume。  
5. 在 New Simple Volume Wizard 中,单击 Next>。  
6. 在 Specify Volume Size 对话框中,保留默认设置,然后单击 Next>。  
7. 在 Assign Drive Letter or Path 对话框中,输入所需的驱动器字母,然后单击 Next>。  
8. 在 Format Partition 对话框中,单击以选中 Format this volume with the following settings。  
-
-
-
-
-
File system 列表中,选择 NTFS。  
Allocation unit size 列表中,选择 64K。  
Volume label 栏中,输入新卷的描述。  
单击以选中 Perform a quick format。  
单击 Next>。  
此时 New Simple Volume Wizard 的最终对话框将会显示。  
Doc | V1 | 2010.09  
软件手册  
Bosch Sicherheitssysteme GmbH  
配置 iSCSI 目标 | zh 133  
1200 and 1400 Series iSCSI Disk Arrays  
9. 选中您的设置并单击 Finish。  
4.3  
创建一个虚拟磁盘  
1. 启动 Server Manager。  
2. 依次展开 StorageMicrosoft iSCSI Software Target iSCSI Targets,然后右键单击您已经添  
加的 iSCSI 目标。  
3. 单击 Create Virtual Disk for iSCSI Target。  
4. 在 Create Virtual Disk Wizard 中,单击 Next>。  
Bosch Sicherheitssysteme GmbH  
软件手册  
Doc | V1 | 2010.09  
   
134 zh | 配置 iSCSI 目标  
1200 and 1400 Series iSCSI Disk Arrays  
5. 在 File 对话框中,输入完全合格的文件名。也请使用扩展名 .vhd。  
6. 单击 Next>。  
7. 在 Size 对话框中,输入新的虚拟磁盘的大小 (以 MB 为单位为了获得最大值,请键入  
Currently available free space 字段中的值,该值乘以 1024 即得到最大值。  
注:  
文件的大小 .vhd等于 LUN 的大小,且不得超过 2TB,因为 BVIP 固件支持 LUN 的大小最大为  
2TB。  
8. 单击 Next>。  
虚拟磁盘已经创建。  
使用本章中所述的程序,在物理硬盘容量用尽之前,您可以添加尽可能多的磁盘。  
现在您成功配置了磁盘阵列,可以将其用于相应的 iSCSI 应用程序。  
4.4  
修改 iSCSI LUN 设置  
更改 LUN 设置时,必须先删除这些 LUN,然后才能重新配置。  
要删除 LUN:  
1. 启动 Server Manager。  
Doc | V1 | 2010.09  
软件手册  
Bosch Sicherheitssysteme GmbH  
   
配置 iSCSI 目标 | zh 135  
1200 and 1400 Series iSCSI Disk Arrays  
2. 右键单击虚拟磁盘 (=LUN),然后单击 Delete Virtual Disk。  
3. 单击 Yes,确认以下警告消息。  
4. 要实际释放容量,请手动删除 Windows 资源管理器中的 .vhd文件。  
现在您可以根据 4.1 - 4.3 部分的说明重新配置 LUN。  
Bosch Sicherheitssysteme GmbH  
软件手册  
Doc | V1 | 2010.09  
136 zh | 配置 iSCSI 目标  
1200 and 1400 Series iSCSI Disk Arrays  
Doc | V1 | 2010.09  
软件手册  
Bosch Sicherheitssysteme GmbH  
Bosch Sicherheitssysteme GmbH  
Werner-von-Siemens-Ring 10  
85630 Grasbrunn  
Germany  
www.boschsecurity.com  
© Bosch Sicherheitssysteme GmbH, 2011  

Nokia 3300 User Manual
Nokia 3285 User Manual
Nokia 3155i User Manual
LG Electronics Chocolate User Manual
GE 169101 User Manual
DeLonghi Coffee Maker emk6 User Manual
Cecilware VAE J1 User Manual
Capresso 112 User Manual
Blackberry 8707v User Manual
Apple HV356T User Manual