DVD-MP12i
MOBILE DVD PLAYER
User manual
Ver. 1.0
TABLE OF CONTENTS
Safety precautions
Precautions
1
2-3
4-5
Identification of controls
When using remote control
Connections
6
7-8
9
Loading and unloading a disc
Turning the power on and off
Switching between DVD and AUX Video Input
Adjusting the volume
10
11
Playing a disc
Playing/pausing
Tuning the sound on and off
Stopping playback
Fast-forwarding/ fast-reversing
Finding the beginning of chapters or tracks
12
13
Playing from the desired location
Chapter/track/title repeat playback
Switching the audio language
14
Switching the angle
Switching the subtitles
15
16
17
Displaying the disc status
Adjusting the sound setting
Changing the default settings(setup)
MP3 instruction
18-22
23
Others
24
Note
Specifications
25
Accessories and Hardware
Service & Support
26
26
SAFETY PRECAUTIONS
+20%
-10%
This digital versatile disc (DVD) video player uses 12V
For future reference, record the model and serial number
(located on the case of the DVD player) in the space provided.
DC.
CAUTION:
THIS DVD VIDEO PLAYER ISA CLASS I LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS DVD VIDEO PLAYER IS HARMFUL TO THE EYES,
DO NOT ATTEMPT TO DISASSEMBLE THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
WARNING : class I laser product - Avoid Long Term viewing of Direct Laser Radiation.
WARNING OF DEW FORMATION
Dew may form on the pickup lens in the following conditions.
- Immediately after a heater has been turned on.
- In a steamy or very humid room.
When the unit is suddenly moved from a cold environment to a warm one.
If dew forms inside this unit, it may not operate properly.
In this case, turn on the power and wait about 2 or 3 hours for the dew to evaporate.
When the unit is used under low temperatures,
the pick up lens might warm up very fast and dew will form.
In this case, turn on the power and wait a while for the dew to evaporate.
1
Precautions
This symbol means important instructions.
Failure to heed them can result in serious injury or death.
Warning
Do not disassemble or alter this unit. Doing so may result in an accident,
fire or electric shock.
Keep small objects such as battery out of the reach of children.
If swallowed, consult a physician immediately.
Use the correct ampere rating when replacing fuses.
Failure to do so may result in fire or electric shock.
Use only in cars with a 12 VOLT negative ground.(Check with your
dealer if you are not sure.) Failure to do so may result in fire, etc.
Do not operate any function that takes your attention away from
safely driving your vehicle. Any function that requires your prolonged
attention should only be performed after coming to a complete stop.
Always stop the vehicle in a safe location before performing these function.
Failure to do so may result in an accident.
Do not watch video while driving. Watching the video may distract the
driver from looking ahead of the vehicle and cause an accident.
Keep the volume at a level where you can still hear outside noise
while driving. Failure to do so may result in an accident.
Use this product for mobile 12V applications. Use for other than
its designed application may result in fire, electric shock or other injury.
Do not place hands, fingers or foreign objects in insertion slots
or gaps. Doing so may result in personal injury or damage to the product.
Do not block vents or radiator panels. Doing so may cause heat to
build up inside and may result in fire.
This symbol means important instructions.
Failure to heed them can result in injury or property damage.
Caution
Insert with the correct battery polarity. When inserting the battery,
be sure to observe proper polarity(+ and- )as instructed. Rupture of
the battery may cause fire or personal injury.
Halt use immediately if a problem appears. Failure to do so may cause
personal injury or damage to the product. Consult a professional mobile
video installer.
2
Precautions
Temperature
Be sure the temperature inside the vehicle is between +55° C(+131° F)
and -5°C(+23°F) before turning your unit on.
Moisture condensation
You may notice the CD playback sound wavering due to condensation.
If this happens remove the disc from the player and wait an hour for
the moisture to evaporate.
Damaged disc
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
Maintenance
If you have problems, do not attempt to repair the unit yourself. Consult a
professional mobile video installer.
Never attempt the following
Do not grip or pull out the disc while it is being pulled back into the player
by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is off.
Inserting discs
Your player accepts only one disc at a time for playback. Do not attempt
to load more than one disc.
Make sure the label side is facing up when you insert the disc.
Playing a disc while driving on a very bumpy road may result in skips.
Irregular shaped discs
Make sure the discs you use in this unit do not have any irregularities.
The outer and inner edges should be round and smooth. Use of irregularly
shaped discs may cause damage to the mechanism.
Installation location
Make sure the unit will not be installed in a location subjected to:
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
3
Identification of controls
See the page in
Front panel
for the details.
Disc slot/
open, close indicator
POWER
button/ indicator
EJECT
button/indicator
PLAY/PAUSE
button/indicator
SKIP
button/indicator
Player/AUX/Monitor indicators
STOP
button/indicator
The button
POWER
EJECT
10
9
Power on/off bypressing this button
To eject a disc
Play/Pause
11
12
12
To stop playback
To locate previous/next chapter or track
Resetting the unit
Press the RESET button with a pointed object,
such as a ballpoint pen, as shown.
Unit will turn off momentary after
the RESET button is pressed.
Note: Pressing the RESET button
will erase some stored contents.
RESET button
4
Identification of controls
Remote Control
EJECT
AV SEL
To locate next chapter or track
3
To change the
playback speed
REPEAT
To locate previous chapter or track
In menu mode, the button(s) of these four
are used to select your desired item.
EJECT button toeject the disc
POWER on/off button
AV SELbutton
To select External/Internal Video
DISPLAY button to displaythe disc status
ANGLE button toselect the cameraangle
Number button
Used to input numbers
3
Button Playing/Pausing
Button to stopplayback
REPEAT button
to play repeatedly
TITLE button
to locate aspecific title chapteror track
MENU Button
to locate aspecific title chapteror track
Joy stick
Goto Button toLocate a locationby entering
its corresponding tracknumber, chapter
number or time
SETUP button
to change thedefault settings
AUDIO Button
to switch theaudio language
SUB button toselect subtitle
MUTE Button
playing with nosound
VOL +/- button
to control thevolume
SEL button
to select theaudio functions
5
When using remote control
Preparing the remote control
Insert battery (3V, CR2025) into the remote control.
Make sure the + side of the battery faces up before closing the cover.
1) Open the cover,
pull the cover as illustrated
2)Insert cell (3V),Close the cover
Operating with the remote control
This section shows you how to use the
remote control. Point the remote control
at the remote sensor and press the buttons.
With about 4m
The remote range: about 4m from the front
of the remote sensor.
(Is) off axis: more than 30L in each direction
of the front of the remote sensor.
Do not expose the remote sensor of the DVD player and the remote control to a strong light source
such as direct sunlight or other illumination. If you do so, you may not be able to operate the DVD
player via the remote control.
Notes on battery
To operate the remote control correctly, follow the instructions below.
Do not insert cell into the remote control in the wrong direction.
Do not charge, heat, open, or short-circuit the cell. Do not throw cell into a fire.
If the remote control does not function correctly or if the operating range becomes reduced,
replace the cell with new one.
Notes on the remote control
Direct the remote control at the remote sensor of the DVD player.
Do not drop or give the remote control a shock.
Do not leave the remote control near an extremely hot or humid place.
Do not spill water or put anything wet on the remote control.
Do not disassemble the remote control.
6
Connections
Front speaker
Front speaker
Amplifier equipped with
a Dolby digital decoder , or
a DTS decoder, or
an MPEG 2 audio decoder
(Sold Separately)
Rear speaker
Center speaker
Rear speaker
Sub woofer
VEDIO INPUT
7 5 ecoabxil
DIGITAL
COAXIAL
R-AUDIO-L
VIDEO
VIDEO
IN
REAR
Remote sensor and remote control
eye jack. Connect the remote control
eye jack to the remote sensor unit.
DC 12V
REMOTE
OUT
FRONT
MON. IN
OUT
FM modulator
or Amplifier
AUDIO OUT
VIDEO OUT
TV or Monitor
RCA input for rear-view camera
To monitor with rear-view camera input
To headrest or ceiling mount monitors
Black: (-) neg. ground input. To vehicle chassis
Brown: (+) pos. reverse wire input (for rear view camera option)
Blue: (+) 300mA max. remote turn-on wire output
Yellow: (+) pos. 12 volt constant input
Red: (+) pos. 12 volt accessory input
Green:
Used to detect the On/Off status of the parking brake.
This lead must be connected to the power supply side of
the parking brake switch.
7
Connections
1 NOTE
Connect
Audio out( audio related, see page 19)
SPDIF/RAW
SPDIF/PCM
RAW DATA VIA SPDIF
PCM DATA VIA SPDIF
Coaxial cable
Audio cable
ANALOG
ANALOG OUTPUT
2 NOTE
1 Refer to the owner's manual for " the connected monitor " as well.
2 Refer to the owner's manual of the connected equipment for additional information.
3 When you connect the DVD player to other equipment, be sure to turn off the power .
4 If you place the DVD near a tuner or radio, the radio broadcast sound might be distorted.
In this case, place the DVD player away from any other tuner or radio.
5 The output sound of the DVD player has a wide dynamic range. Be sure to adjust the
receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by
a sudden high output.
6 Turn off the amplifier before you connect or disconnect the DVD player's power leads.
If you leave the amplifier power on, the speakers may be damaged.
3 NOTE
1. We advise to connect the EX-VIDEO-CON lead.
And so the front display only will be on while detecting the parking brake ON.
Or if the EX-MONITOR-CON and MONITOR VIDEO IN are used,
the front display will be on while backing the car.
2. This product’s REAR VIDEO OUT and VIDEO OUT are for connections of displays
to enable passengers in the rear seats to watch the DVD or Video CD.
Warning
NEVER install the display in a location that enables the Driver to watch the DVD
or Video CD while driving.
This product detects whether your car’s parking brake is engaged or not,
and prevents you from watching a DVD or Video CD on the display connected to
Front Video Out while driving.
Example: When you attempt to watch a DVD, the screen is black. When you park your
car in a safe place and apply the parking brake, the picture appears on the screen.
8
Loading and unloading a disc
Loading and unloading a disc
Turn on the power before loading and unloading discs.
1
Insert the disc with the side
containing words diagrams
facing upwards.
2
Unloading disc
Press EJECT button, the disc is automatically
ejected.
Once the disc is partially inserted, it is
drawn in automatically. Playback starts.
EJECT
EJECT
Notes:
If wrong disc, upside-down discs or dirty discs
have been inserted, “NO DISC ” is displayed.
Remove the disc.
Do not put any objects other than discs into the
disc slot, doing so may cause the player to
malfunction.
Tips
VCD
CD
DVD
MP3
These indicate the discs for which the function can be used.
DVD
VCD
MP3
:You can use this function with DVD discs.
:You can use this function with VIDEO CDs.
:You can use this function with MP3 discs .
:You can use this function with CDs .
CD
About this owner's manual
This owner's manual explains the basic instructions of this DVD player. Some DVD
discs are produced in a manner that allows specific or limited operation during playback.
As such, the DVD player may not respond to all operating commands. This is not a
defect in the DVD player. Refer to the instruction notes of discs.
"
"may appear on the screen during operation.
A "
" means that the operation is not permitted by the DVD player or the disc.
9
Turning the power on and off
Switching between External and Internal Video
Adjusting the volume
Turning the power on and off
1
AV SEL
Press
POWER button
The power turns on.
To turn the power off, Press
button again.
POWER
Play Position Memory Function
Even if you turn power off or switch the ignition
Key to OFF during playback or change the video
source, playback will continue from the point
where playback stopped when the power is
turned ON again.
The play position memory is released if the disc
is removed or the Reset switch is pressed.
Switching between DVD
and AUX Video Input
2
To switch between DVD andAUX Video input,
press the AV SEL on the remote control.
AV SEL
AV SEL
Connect
INTERNAL VIDEO
Using AUDIO and
VIDEO OUT,
Using AUDIO and VIDEO IN,
connect the DVD video player
to a VTR, TV/VTR combination
or video selector
connect the monitor
or audio system
AUX Video Input
3 Adjusting the volume
Press the + button to increase the volume.
Press the - button to decrease the volume.
10
Playing a disc
Playing/pausing
Tuning the sound on and off
VCD
CD
DVD
MP3
1 Playing a disc
Caution
~
With some DVDs, certain operations are disabled.
Such operations are not possible on such DVDs.
The DVD functions described in this manual are
not supported by all instructions for details on the
features supported.
Fingerprints on a disc may adversely affect
playback. If a problem occurs, remove the disc
and check for fingerprints on the playback side.
Clean the disc if necessary.
When using the remote control, be careful to
pressing multiple buttons at the same time may
cause erroneous operation.
VCD menu
Press
button.
Use the number keys(0~9) to select the
desired item, then press ENTER or
Playback starts.
VCD
DVD
MP3
If a menu screen appears
On DVDs and video CDs with playback control
(PBC), menu screen may appear automatically.
If this happens, perform the operation described
below to start playback.
Note: For many discs, the menu screen can
also be displayed by pressing MENU or TITLE.
Or
DVD menu
Use the Joystick or the number keys(0~9) to
select the desired item, then press ENTER or
Note: The menu screen does not appear when
the PBC function is turned off. If this is the
case press MENU to turn on the PBC function.
In PBC off mode, you can use the number keys
to input the desired track also.
Or
Or
Playing/pausing
During playback press
Press
to pause playback.
again to resume playback.
Note: For some discs it is not possible to select
items for the menu to menu screen using the
number buttons (0~9).
Tuning the sound
on and off
VCD
CD
DVD
MP3
Tips
During playback press MUTE , no sound
is played. Press Mute to resume normal
playback with sound.
Using the Number keys
This describes use of the Number keys.
Toinput 16: Press the 1 button and then press the 6 key.
Toinput 28: Press the 2 key and then press the 8 key.
Toinput 108: Press the 1 key and then press the 0 and 8
button.
After the number input, press ENTER or PLAY button to start
the playback.
11
Stopping playback
Fast-forwarding/ fast-reversing
Finding the beginning of chapters or tracks
VCD
CD
DVD
MP3
2 Fast-forwarding/
fast-reversing
During playback press
7(fast-reverse) or8(fast-forward)
Each time you press the7or8button,
the playback speed changes to X1, X2,
X3 , X4 the normal speed
or normal speed.
Press to return to
normal playback.
VCD
CD
DVD
MP3
Notes:
No sound or subtitles are played during
fast-forwarding/fast-reversing of DVDs
or Video CDs.
However, sound is played during fast-
forwarding/fast-reversing of audio CDs.
1Stopping playback
Press the stop button during playback to stop
playback.
Press
during playback.
VCD
CD
DVD
MP3
3 Finding the
beginning of chapters or tracks
Tips
Using the PRE-STOP function(DVD only. )
When the PRE-STOP function is used, the
position at which playback is stopped is
stored in the memory, and playback resumes
from that position.
During playback press9or:
The chapter/track switches each time
the button is pressed,
and playback of the
Press
once during playback.
selected chapter/track
starts.
Or
PRESS PLAY TO CONTINUE is displayed.
Press
in the PRE-STOP mode.
Playback starts from the position at which
it was stopped.
::Press this to start playback from the
beginning of the next chapter or
track.
To cancel the PRE-STOP function
Either press again in the PRE-STOP mode,
eject the disc or turn the power to clear
the memory. Playback will start at the
beginning of the disc.
9:Press this to start playback from the
beginning of the previous chapter or
track.
Note: Some DVDs do not have chapters.
Notes:
For some discs, the position at which playback
was stopped may not be accurate.
For Video CD:
Supplementary explanation
Chapters are divisions of movies or
musical selections on DVDs.
Press
during playback,
1 in PBC off mode, playback stops.
Press PLAY, playback will start at the
beginning of the disc.
Tracks are divisions of movies or musical
selections on video and audio CDs.
2 in PBC on mode, playback stops and press
PLAY then it will be back to main page.
12
Playing from the desired location
Input the chapter,
the title or the time
from which you want
to start playback using
the joystick and the number
keys(0~9).
~
TITLE 02/02 CHAPTER 012/057
TOTAL TITLE NUMBER
CURRENT TITLE
TOTAL CHAPTER NUMBER
CURRENT CHAPTER
(When title 2 is input )
VCD
CD
DVD
TITLE 02/02 CHAPTER 012/057
Playing from
the desired location
Locating a specific location by entering
the track number, the chapter number
or the time.
1
(When chapter 12 is input )
TITLE 01/02 TIME 01:30:00
(When 1 hour, 30 minutes is input as
the elapsed time)
During playback, press GOTO.
GOTO
30:00
DVD
(When 30 minutes is input as
the elapsed time)
TITLE 01/02 CHAPTER 012/057
Press GOTO again
Notes:
TITLE 01/02 TIME_ _:_ _:_ _
Input the hours first, followed by the
minutes, then the seconds.
Press GOTO to cancel the search mode
and resume normal playback.
Some discs may not respond to
this process.
VCD
CD
VCD(PBC OFF)
Some scenes may not be located
precisely as you specified.
This method for accessing specific
locations is available only within the
current title of the DVD video disc or
within the current track of the
VIDEO CD/audio CD.
GOTO
_ _:_ _
Press ENTER
Playback starts from the selected
chapter, track or the time.
13
Chapter/track/title repeat playback
Switching the audio language
VCD
DVD
2Switching the
audio language
On DVDs including multiple audio modes or
multiple audio languages, the audio language
can be switched during playback.
REPEAT
REPEAT
During playback, press AUDIO.
The sound switches between the different
audio modes recorded on the disc each time
the button is pressed.
Notes:
The language selected with the default setting
is set when the power is turned on or the disc
is replaced. If the disc does not include that
language, the disc’s default language is set.
For some discs it is not possible to switch the
audio language during playback.
Chapter/track/title
repeat playback
During playback ,
Press REPEAT
1
REPEAT
Some time may be required for the audio
language to change.
The repeat mode switches each time
the button is pressed.
Video CDs with multiplex audio
During playback, press AUDIO.
DVD
CHAPTER REPEAT ON
TITLE REPEAT ON
REPEAT OFF
The combination of the left and right channels
changes each time the button is pressed.
LEFT VOCAL
RIGHT VOCAL
MONO LEFT
STEREO
MONO RIGHT
VCD
CD
VCD(PBC OFF)
REP - ONE
REP-ALL
REPEAT OFF
14
Switching the angle
Switching the subtitles
DVD
2Switching the subtitles
With DVDs on which multiple subtitle
languages are recorded, the subtitle
language can be switched during playback.
During playback, press SUB.
The subtitle language switches
between the languages recorded
and you also can select whether to
display the subtitles on the disc each
time the button is pressed.
DVD
1Switching the angle
Note:
Some time may be required for the subtitle
to change.
The language selected with the default
setting is replaced. If the disc does not
include that language, the disc’s default
language is set.
With DVDs on which images photographed
from multiple angles are recorded, the angle
can be switched during playback.
During playback, press ANGLE.
For some discs, the subtitles will be
displayed even when this is set to off.
The angle switches between
the angles recorded on the disc
each time the button is pressed.
Switching from the menu
Tips
For some discs, the audio language, angle and
subtitle can be switched from the disc menu.
Note:
Some time may be required for the angle
to change.
Press MENU or TITLE, select the item,
then press ENTER.
Or
15
Displaying the disc status
VCD
CD
Displaying the disc
status
2
Use the procedure described below to display
the status(track number, etc.)of the currently
playing Video CD or Audio CD on the screen.
During playback,
press DISPLAY.
The playback status switches each
time the button is pressed.
TOTAL ELAPSED
xx:xx:xx
PLAY:11
TOTAL:22
TOTAL:22
DVD
Displaying the disc status
Use the procedure described below to display
the status(title number, chapter number, etc.)
of the currently playing DVD on the screen.
1
TOTAL REMAIN
xx:xx:xx PLAY:11
SINGLE ELAPSED
During playback,
press DISPLAY.
The playback status switches each
time the button is pressed.
SINGLE REMAIN
TITLE 01/01 CHAPTER 001/057
xx:xx:xx
OFF
TITLE REMAIN
xx:xx:xx
CHAPTER ELAPSED
xx:xx:xx
CHAPTER REMAIN
xx:xx:xx
the display turns off.
16
Adjusting the sound setting
VCD
CD
DVD
MP3
Adjusting
the sound setting
1
The sound settings can be
changed to suit your personal
preferences and usage.
To select the audio functions as you like:
Press the VOL +,- button
adjust the setting
as you like
Press SEL button on the remote repeatedly
To
until the item you want to adjust appears on the screen
The level changes from
L08~L00 and L00~R08
Balance
BALANCE : L00
Bass
The level changes from -07~+07
BASS
: -00
: -00
Treble
The level changes from -07~+07
ON or OFF
TREBLE
Loudness
LOUDNESS ON
Volume
VOLUME
18
The level changes from 00~36
17
Changing the default settings(setup)
VCD
CD
DVD
MP3
Changing
the default settings(setup)
1
EJECT
Press SETUP during stop.
The setting menu appears.
Press joystick button to move the cursor to
the item, then press ENTER to select the item
you want.
SETUP MENU
MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
GENERAL SETUP
NORMAL/PS
NORMAL/LB
WIDE
AUTO
HI-RES
N-FLICKER
TV DISPLAY
PIC MODE
ON
OFF
ANGLE MARK
EXT AMP
ON
OFF
OSD LANG
ENGLISH
SCR SAVER
ON
OFF
NORMAL/PS
NORMAL/LB
WIDE
NORMAL TV PAN SCAN
NORMAL TV LETTER BOX
WIDE SCREEN TV
TV DISPLAY
PIC MODE
SET TV DISPLAYMODE
AUTO
HI-RES
AUTO MODE
SET PICTURE MODE
ANGLE ON/OFF
HIGH-RESOLUTION MODE
NONFLICKER MODE
N-FLICKER
ANGLE MARK
EXT AMP
TURN EXT AMP ON/OFF
SET OSD LANGUAGE
SCREEN SAVER
OSD LANG
SCR SAVER
18
Changing the default settings(setup)
EJECT
SETUP MENU
MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
SPEAKER SETUP
DOWNMIX
LT/RT
STEREO
DOWNMIX
LOUD SPEAKERS SETUP
LT/RT
SET LT/RTDOWNMIX
STEREO
SET STEREO DOWNMIX
AUDIO SETUP
ANALOG
SPDIF/RAW
SPDIF/PCM
AUDIO OUT
OP MODE
LINE OUT
RF REMOD
STEREO
L-MONO
R-MONO
MIX-MONO
DUAL MONO
FULL
6/8
4/8
2/8
OFF
DYNAMIC
PRO LOGIC
LPCM OUTPUT
OFF
ON
AUTO
LPCM 48K
LPCM 96K
AUDIO OUT
ANALOG
AUDIO RELATED
ANALOG OUTPUT
SPDIF/RAW
SPDIF/PCM
RAW DATA VIA SPDIF
PCM DATA VIA SPDIF
19
Changing the default settings(setup)
EJECT
SETUP MENU
MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
EXIT
SETUP
OP MODE
LINE OUT
OPERATIONAL MODE SETUP
LINE OUT MODE
RF REMOD
TV WITH NO AV INPUT
DUAL MONO
STEREO
L-MONO
DUAL MONO(1+1) SETUP
SET STEREO MODE
SET LEFT MONO MODE
SET RIGHT MONO MODE
SET MIXED MONO MODE
R-MONO
MIX-MONO
FULL DYNAMIC RNG COMPRESSION
DYNAMIC RNG COMPRESSION 7/8
DYNAMIC RNG COMPRESSION
FULL
- -
DYNAMIC RANGE
COMPRESSION
DYNAMIC
6/8
- -
5/8
DYNAMIC RNG COMPRESSION
4/8
- -
2/8
- -
DYNAMIC RNG COMPRESSION 2
DYNAMIC RNG COMPRESSION 3/8
DYNAMIC RNG COMPRESSION
1/8
DYNAMIC RNG COMPRESSION
DYNAMIC RNG COMPRESSION
OFF
OFF
PRO LOGIC
OFF
ON
SET PRO LOGIC ON/OFF
PRO LOGIC OFF
PRO LOGIC ON
PRO LOGIC AUTO
AUTO
LPCM OUTPUT
LPCM 48K
LPCM 96K
SET LPCM TO 48K OR 96K
LPCM OUTPUT 48K
LPCM OUTPUT 96K
20
Changing the default settings(setup)
EJECT
SETUP MENU
MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
CHINA
FRANCE
HONG KONG
JAPAN
TAIWAN
GBR
PREFERENCES
TV TYPE
MULTI
NTSC
PAL
USA
LOCALE
1 G
2
3 PG
4 PG 13
5
6 PG-R
7 NC-17
8 ADULT
NO-PARENTAL
PARENTAL
PASSWORD
CHANGE
RESET
DEFAULTS
SMART NAV
WITH MENU
LOGO
OLD PASSWORD:
MPG LOGO
JPG LOGO
NEW PASSWORD:
CONFIRM PWD:
TV TYPE
LOCALE
SET TV STANDARD
MULTI
NTSC
MULTISYNC TV
NTSC TV
PALTV
PAL
PREFERRED LOCALITY CODE
GRB
UNITED KINGDOM
21
Changing the default settings(setup)
EJECT
SETUP MENU
MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
1 G
2
3 PG
SET TO G, LEVEL 2, PG,
PG13, LEVEL 5, PG-R,
NC-17,ADULT,
PARENTAL
SET PARENTAL CONTROL
4 PG 13
5
OR NO-PARENTAL
6 PG-R
7 NC-17
8 ADULT
NO-PARENTAL
PASSWORD
CHANGE
OLD PASSWORD:
NEW PASSWORD:
CONFIRM PWD:
DEFAULTS
RESET
LOAD FACTORY SETTINGS
PLAYING MP3 WITH MENU
WITH MENU
SMART NAV
SMART NAVTYPE
LOGO
OPEN SCREEN LOGO
MPG LOGO
JPG LOGO
22
MP3 instruction
EJECT
MP3
1MP3 instruction
Insert the MP3 disc then playback starts,
the MENU of elapsed track appears.
SMART
MP3
NAV 1
J&Z
xxx
xxx
xxx
xxx
1
2
3
4
5
ROOT
MP3
MP3
Mp3
MP3
PLAY MODE
REP-ONE
PRESS
9:
To play the preceding or the next track
4 3
In play mode, it starts to fast-forward or fast-revers
To select the track with the number button
Number button
Note: For some discs it is not possible to select
items for the menu to menu screen using the
number buttons (0~9).
4 3
In stop mode, move cursor to PLAY MODE with joy stick
,
pressing joy stick
to change PLAY MODE: SINGLE, REP-ONE,
PLAY MODE
FOLDER, FOLDER REP, DISC SCAN, DISC, DISC REP, RANDOM,
SHUFFLE ON , PROGRAM P0. Select the desired play mode, then
move the cursor back to the track menu and you desired track
with
, finally press PLAY to start playback again.
STATUS DISPLAYED: CHAPTER ELAPSED XX:XX:XX
CHAPTER REMAIN XX:XX:XX
DISPLAY
Playing MP3 disc, the play position memory is not available.
23
Others
In case of difficulty
If operation freezes, the screen goes black or the unit should otherwise not function properly,
try turning the power off then back on. Alternatively, try the following methods in the order
listed until the unit returns to normal playback mode.
1) Turn the car’s ignition OFF and back ON again.
2) Press the RESET button on the face of the unit
This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the
rest of your system is properly connected or consult a professional mobile video installer.
Symptom
Cause
Remedy
Unit does not
operate.
Replace with a fuse of the specified capacity.
Fuse is blown.
Monitor’s power is not turn on. Turn on the monitor’s power
Wait a while(about 1 hour) for the condensation
to dry.
Condensation
Operation is
unstable.
Replace the remote control unit’s battery with
new one.
Remote control unit’s
battery is worn.
Remote control sensor or
transmitter is dirty.
Clean the sensor or transmitter.
No picture is
produced.
Switch to the mode you want to see.
Monitor’s mode is not
switched to the mode you
want to see.
Playback does
not start.
Check the disc and load it with the labeled side
facing upward.
Disc is loaded upside-down.
Clean the disc.
Disc is dirty.
Check if the disc is able to be played back.
A disc not able to playback
with this unit is loaded.
Cancel the parental lock or change the rating
level.
Parental lock is set.
Picture is
unclear or noisy
The picture may be slightly disturbed, but this
is normal.
Disc is being fast-forwarded
or fast-reversed.
Check the battery power and wiring.
The unit may malfunction if the battery power is
under 10.8 volts with a load applied.
Vehicle’s battery power is
weak.
Monitor’s fluorescent tube is
worn.
Replace the monitor’s fluorescent tube.
Image stops
sometimes.
No disc
Replaced with a non-scratched disc.
Disc is scratched.
Load a disc.
No disc is loaded.
Disc is dirty.
Clean the disc.
For some discs or playing modes, certain
operations are not possible. This not a
malfunction.
Not valid
Remote control operation
is not possible.
VIDEO SIGNAL
SYSTEM IS NOT
CORRECT
Change the TV TYPE of the unit(see SET UP).
PAL( or NTSC) disc is loaded.
According to the connection, set ANALOG for
using audio cable, set SPDIF/RAM/PCM for
using coaxial cable. See page 7,8 and 19.
No sound
Select the wrong Audio Out
24
Note
Specifications
Note
Remove this CD
stopper before use.
Apply the paper
cover (supplied) on
the screw hole to
keep out dust.
Remove this CD
stopper before use.
Apply the paper
cover (supplied) on
the screw hole to
keep out dust.
Two black sticking papers
There are 2 mounting screws on the case of the DVD player( as above figure
shows) to protect the unit during shipping.
You need to remove the sticking papers and screws after unpacking this product.
Apply the black sticking papers(supplied)on the screw holes to keep out dust.
Specifications
Audio Audio output (analog):
Audio output
2V ± 0.2V 100kÙ
21V0k¡0.2
Audio output (digital):
Adput(coilxa):0.7V5
0.5V 75Ù
SSgls-im:oerthan90dB ignal-to-noise ratio:
DDyicg:moerthan85dB ynamic range:
DDriol:etshan.08%istortion:
more than 90 dB
more than 85dB
less than 0.08%
Video Video output:
Video output:
1V ± 0.2V 75Ù
1¡0.2V
Resolution:
Rsum:ortah50line
more than 500 lines
+20%
-10%
Power
Power requirement:
Power consumption:
12
V DC , 1.5A
less than 20W
General Dimensions(approx.):
178x50x183mm
(w/h/d) incl. Projecting parts
1.4Kg
Weight:
Normal operating temperature range: 23¡F to131¡F
Design and specifications are subject to change without notice.
The illustrations in this manual may appear different from the
actual product due to printing conditions.
25
Accessories and Hardware
INSTALLATION
Hex bolt M5 x 14
Hex bolt M5 x 6
X 4
X 4
Mounting bracket x 2
Mounting bracket X 1
CABLE
Power cable x 1
Audio/Video Cable x 1
IR sensor x1
Remote control x 1
Lithium Button Cell (3V) x 1
+
3 V
Cigarette lighter cable x 1
Service & Support
In the case of technical problems or support questions please refer to your dealer.
In case of malfunction or technical questions you can also use the direct
manufacturer service center with eMail and telefone hotline. You can find the contact
In this section you can also learn how to use our Manufacturer Repair Service in case
your product should have a defect.
26
|