XO1915BT
MADE IN CHINA
In-Dash Mobile Video System
Warnings and Precautions
Warnings
1Only connect the unit to a 12V power supply with negative grounding.
2
3
Never install the unit where the operation for safety driving is restrained.
Never use the video display function in the front when driving to prevent the violation of laws
regulations and also to reduce the risk of traffic accident except using for rear view video camera.
4
5
Never expose the unit, amplifier, speakers to moisture or water to prevent electronic sparks or fires.
Please don't change the fuse in the power cord without professional guidance, improper fuse may
cause damage to this using unit or even cause fire.
6
7
Please power off the unit at once and send it back to the after-sales service center or the dealer/
distributor yo purchased from if one of the following symptoms is found:
(a)NO audio output; (b)NO image output;(c)Water or other obstacle enters the unit; (d)Smoking;
(e)Peculiar smell.
To ensure safe driving, please adjust the volume to a safe and comfort level in case of emergency
situations.
2
Warnings and Precautions
Precautions
Never disassemble or adjust the unit without any professional guide. For details, please consult any professional car shop/
dealer for inquiry.
1
2
If the front panel or the TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to wipe off the spot.
Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or decoloration to the
applicant.
3
4
5
If any abnormal behavior of the unit is found, please refer to trouble shooting guide of this manual. If no relevant information is
found , please press the [RESET] key on the front panel to resume factory default.
If you have parked the car in hot or cold weather for a long time, please wait until the temperature in the car becomes normal
before operating the unit.
Using in-car heater in low temperature environment may result in beads coagulate inside the unit. DO NOT use the unit in this
situation, eject the disc and wipe off the bead on the disc. If the unit still does'tnwork after a few hours, please contact with
after-sales service center.
6
7
8
No fierce impact to the LCD monitor when it is in open position for preventing the damage to any mechanisms inside.
To prevent the damage to the screen, avoid touching it with sharp objects.
The monitor employs auto motorizing mechanism, please don't push, pull, or swivel the monitor manually to prevent damage
to any mechanisms inside.
9
To provide a clear demonstration and an alternative for easy understanding to the operation of this unit, graphic illustrations
are used. However, these illustrations are some different from the actual images displayed in the unit.
10 During operation the unit," "is displayed if the particular operation is not available or illegal.
11 Operate the unit correctly according to this manual to prevent. Unnecessary problem. The guarantee wo'nt be valid if the
problem is caused by inappropriate operation.
3
Electric Connection
VIDEO IN
(YELLOW)
(YELLOW)
Warning
BACK A CAR VIDEO IN
TV ANTENNA PLUG
Without TV tuner,
without this wire.)
Before installation, pls make
conference to the chart.
Breaking wire: The unit will
without displayif not connect
with the breaking wire.
(
(RED) AUX RIGHT IN
(WHITE)
AUX LEFT IN
SUBWOOFER
BROWN
10
FM/AM antenna input
Fuse(10A)
Orange
(WHITE)
FRONT LEFT RCA OUT
Gray
Gray
Gray
(RED)
FRONT RIGHT RCA OUT
Light wire
(YELLOW)
VIDEO OUT
White
Gray
Brown
Pink
Brake detecting wire
Back car detecting wire
To front left speaker
To front right speaker
Front.L
White/Black
Gray
Remote control for amplifier.
Blue
Front.R
Rear.L
Connect control for antenna
Gray/Black
Green
Ignition key
switch
Ignition wire(Red)
Battery wire(Yellow)
To rear left speaker
To rear right speaker
Green/Black
Purple
Car fuse box
(Main fuse)
Rear.R
Ground wire(Black) (To car chassis)
Purple/Black
Battery
4
Installation
Before installing the receiver, fit it in the suitable place of
your car. Then connect the corresponding speakers and
electrical connections. When your system is operated properly,
follow the instructions installation
INSTALL THE UNIT
1)Install the bracket
2)Bend over some slices to secure the
installation of bracket inside of dash.
3)To avoid shake of the receiver, make
2)Bend over the slices
sure to install the fixation strap behind
(supplied)
1) Adapter
(not supplied)
the receiver.
Slices
(supplied)
REMOVE THE UNIT
Insert the keys into the small gaps in
the right and left sides of the unit at
the same time. Link the keys to the
slices and then pull out the unit lightly
to remove it from your car, and then
pull out the connection plugs.
3) Two keys for releasing
the unit (supplied)
5
General Features
13
12
11
10
2
1
APS/
MENU
BAND
CLK/ /AF
ST/RPT/TA
PUSH
ENTER
SOURCE
MUTE/PTY
MIC
VOL
6
7
8
3
4
5
9
Note: This unit doesn't have RDS function,
AF/TA/PTY neither.
14
15 16
6
Remote Control
General Features
2
1
13
12
11
10
Loading and replacing the battery
APS/
MENU
BAND
CLK/ /AF
ST/RPT/TA
PUSH
ENTER
SOURCE
MUTE/PTY
MIC
VOL
Pull out
3
4
5
6
7
8
9
1
2
3
4
5
Remove Panel: Press[ ]to remove the panel.
MENU Button: System setting.
BAND Button: Band switch.
SOURCE Button : Play source switch.
Four Directions Button: Select the menu through up/down/
Notes of remote control using:
1)Aim the remote controller at the remote sensor on the unit.
2)Remove the battery from the remote control or insert a
battery insulator if the battery has not been used for a
month or longer.
left/right direction.
6
ST/RPT/TA Button: Sound track switch/Repeat/
Traffic Broadcast.
MIC.
MUTE/PTY Button: Mute/Program style.
USB Port.
3)DO NOT store the remote control under direct sunlight
or in high temperature environment, or it may not function
properly.
4)The battery can work for 6 months under normal condition.
If the remote control can't work, please change the battery.
5)Use(button shaped) lithium battery(CR-2025)only.
6)DO NOT recharge, disassemble, heat or expose the battery
in fire.
7)Insert the battery in proper direction according to the(+)
and ( - ) poles.
8)Store the battery in a place where children cannot reach to
avoid risk of accident.
7
8
9
10
10
APS/
Button: Play/Pause/Reception Scan.
11
12
13
CLK/ /AF Button: Clock/Stop/Reception Scan.
TFT-LCD screen.
VOL Button.
SD Slot.
14
15
16
Reset Button.
[
]Button: To eject the DISC.
7
Remote Control
2 [BAND/RDM] Button: Band switch/Play randomly
[APS/PRG] Button: Scan/Program
Button and Function
[ST/RPT] Button: Stereo switch/Repeat
PWR
Mute
SRC
REC
Sub-T
1
2
[
[
]Button: Play/Pause
]Button: Stop
3
R/L
N/P
Band
RDM
Language
Angle
[Setup] Button: Menu setting
[Title] Button: Title Menu
7
6
SEL
APS
PRG
[ENTER] Button: Play/Confirm
[ ][ ][ ][ ]Button: Up/down/left/right button
CLK
EQ
S T
RPT
AF
[
] Button: Ring on
[OSD/ Id3] Button: Screen Display/ Id3 information
] Button: Ring off
4
3
Enter
TA
[
[0~9]Button:0~9
[GOTO] Button: GOTO search
[RO/SN] Button: Radio scan
5
6
7
Setup
Title
PBC
PTY
2
3
1
ABC
DEF
4
5
[AF] Button: Search stations automatically
[TA] Button: Traffic broadcast
[PTY] Button: Program style
4
5
6
OSD
I D3
GHI
JKL
MNO
7
8
9
PQRS
WXYZ
TUV
[
[
]Button: Forward/Next chapter
]Button: Rewind/Last chapter
0
RO/SN
#
Goto
*
10+
[+/-]Button: Increase/recluce volume
[SEL] Button: System setting
[CLK] Button: Clock display
[EQ] Button: Sound effect
Note: Remote picture just for confernce.
[N.P/ANGLE] Button: Video switch/Angel Adjustment
[R.L/LANGUAGE] Button: Left/right sound track switch
dialogue language.
[PWR] Button: Power
1
[REC/Sub-T]Button: Transfer recording/Language switch
[MUTE] Button: Mute
[SRC] Button: Play source switch
Note: This unit doesn't have RDS function, AF/TA/PTY neither.
This unit doesn't have bluetooth function, [ ]/[ ] neither.
8
Play operation
MENU
/APS
MUTE
Press this button to turn off volume and again to resume.
Note: If the unit does not have this function, please skip it.
APS/
MENU
CLK/ /AF
ST/RPT/TA
PUSH
ENTER
SRC/PWR
BAND
SOURCE
VOL
Press [SRC] button shortly will turn the unit on. Hold [SRC]
button down will turn the unit off.
MUTE/PTY
MIC
NOTE: When the power is on, press [SRC] button will show the
following picture, touch the certain icon to select the exact function
needed.
SRC/PWR
VOL
MUTE/PTY
CLK/
CLK: In reception state, press this button will display the time,
but can not adjust the time.(Time adjust, turn to P12,
system setting.)
Gray icon can not use.
NOTE:
In the play mode, press[
again to stop.
]button once to pause, press it
:
Press [SRC] button to switch the following if the unit is without
touch function.
Note: If the unit does not have this function, please skip it.
RADIO
AUX
USB
SD
DVD
TV
Eject
EJECT:
Press[
] to eject the disc.
About 10 seconds after the disc ejected ,if not
taken out, the disc will be absorbed in again.
NOTE:
Volume
Increasing Volume:
Rotate the VOL button in counterclockwise direction.
Decreasing Volume:
PLAY/PAUSE
Play/pause:
Press [APS/
] button to play or pause.
NOTE:
Press [VOLUME] button can play too.
Rotate the VOL button in anticlockwise direction.
9
Play operation
Insert DVD/VCD/CD disc, touchscreen will show menu as follows:
Insert MP3 disc, and TFT will show the menu as follows:
Note: Without touch function, with this display.
1-001_______MP3
2-002_______MP3
3-004_______MP3
XXXXX________XXX
XXXXX________XXX
XXXXX________XXX
01
Note: Because the different situation of Disc REC, some of the CD-R,
CD-RW,DVD-R,DVD-RW,DVD+R,DVD+RW Disc may can not be readed.
And the Disc without final treatment can not be readed too. Regarding the
final treatment, please make conference to the guide of REC set or
REC manual.
In this menu, the menu on the right side is the sub-menu.
[ ]
You can press
[ ]
tu button to select the file and items
you like.
R/L
R/L:
Select chapter or section: In the DVD mode,press [
/
] to
In VCD/CD/DVD mode, press [R/L]on the screen or remote
control to switch among mono L mono R or stereo.
choose the last chapter; press [ / ] to choose the next chapter.
Forward: Hold [
Rewind: Hold [
/
/
] button down;
] button down.
TIT
Repeat
In play mode, press [TIT] on the screen or remote control to
back to the title menu, and re-select the items needed.
Title:
Repeat: In the play mode, press[ RPT ] on the screen or on the
remote control to transit among the following status.
ESC
Esc:
REP ONE
REP DIR
REP ALL
REP OFF
In play mode, press this button to exit the playing.
10
USB/SD operation
Inserting the SD/ MMC card
APS/
Press the OPEN button on the panel.
MENU
CLK/ /AF
ST/RPT/TA
PUSH
ENTER
Remove the panel.
BAND
Insert the SD/MMC card into SD/MMC compartment on the
inner side. Then the playing mode will be changed into SD
mode automatically. The first card track playback will start.
SOURCE
VOL
MUTE/PTY
MIC
USB
Inner panel:
Play operation
PLAY/PAUSE:
Press the open button on the front panel to flip it down.
1
Press [
] button to play or pause.
,
Select:
Under USB or SD play mode, press[
tracks.
] button to select
REPEAT:
Press [ST/RPT] button to repeat the playing.
1. Disc slot
3
4
2
2. Eject button
3. SD card slot
4. RESET button
REP ONE
REP DIR
REP ALL
REP OFF
BAND:
Press [BAND] button to play the disc randomly.
Inserting the USB device
Insert the USB device into the USB slot on the front panel.
Then the playing mode will be changed into USB mode
automatically. The first USB device track playback will start.
RDM OFF
RDM ON
11
System setting
MENU
Video setup
ENTER MENU:
Press[ MENU ]button
Bright Color Contrast Tint
Video mode:
VIDEO AUDIO SYSTEM
Menu operation
Clicks on the menu option
Vmode
STAN
BRIGHT
COLOR
CONTRAST
TINT
13
14
Press[
Press [
] to adjust.
] to confirm and exit.
USER
SOFT
ESC
14
BRIG
15
15
VMODE
STAN
ESC
Audio setup
Audio setup Bass Treble Balance Fader
setup between 0~14.
Audio mode:
Menu operation
Video
Audio System
Clicks on the menu option
EQ setting
BASS
0
0
0
Press[
Press [
] to adjust.
] to confirm and exit.
TREBLE
BALANCE
FADER
EQ
NORM
CLAS
ROCK
POP
ESC
NORM
ESC
System setup
Loud ON and OFF
Beep ON and OFF
System mode:
Menu operation
Video
Audio System
Clicks on the menu option
TOPIC: can set the receive topic as RED /YELLOW
BLUE /GREEN .
LOUD
OFF
Press[
Press [
] to adjust.
] to confirm and exit.
BEEP
ON
GREEN
OFF
ESC
TOPIC
Time Display ON and OFF
TIME DISP
TIME ADJ
00:00
Time Adjust press [
then press [ ]or [
] or[
]button to setup.
] button to select hour/minute
ESC
12
TV tuner
Channel Selection
[
[
](CHANNEL):up
](CHANNEL):down
APS/
MENU
CLK/ /AF
PUSH
ENTER
BAND
ST/RPT/TA
Direct Channel Selection
(Only for remote control)
SOURCE
VOL
MUTE/PTY
MIC
Enter a channel number by pressing [0]to[9].
SOURCE
Without touch function, without these icons.
TV
TV tuner
AMS
ESC
Preparation:
To receive TV broadcasts, install the TV antenna.
For receiving TV broadcasts, stop your car where there is no
obstacle to broadcast reception around.
TV Scanning:
Press [SRC] button or touch [AMS] can scan and store TV
program automatically.
Channel Search
Press the [ APS ] button can search and store TV station
automatically.
Note: If the unit does not have this function, pls skip this page.
13
Bluetooth
Paring
The Bluetooth is wireless mode of transmission in short distance.
Through Bluetooth function, the DVD unit establishes connection
with Bluetooth handset. And then, these units can realize mutually
contrdling and file transfering.
Phone set pairing step as follows:
A: Turn on Bluetooth, then
touch On/Off icon to turn
on this function.
NO.2
B: Turn on handset's Bluetooth
function .
Choose the Bluetooth Mode
Method :
A: Press the [SOURCE] button, to
return to main menu..
C: When the mobile phone
set finds the signal, input
pairing number. Initial Pairing Code No. 0000
B:Exhales the main menu, choose
the Bluetooth to enter the
D: After pairing, TFT screen shows pairing succeed and
quit the pairing.
Bluetooth mode.
NO.1
Working mode of Bluetooth
Bluetooth has the following functions:
A: Paring
Make DVD Bluetooth function as handse'ts
facility through pairing.
NO.1
BLUETOOTH-ON
PASSWORD-0000
CONNECTTING...
B: Connecting
After connecting with the handset,
you can operate the mobile phone through DVD unit
(such as H,F, call, call record etc.)
NO.2
14
Bluetooth
Answering
Making phone call
After connecting, you can make phone call through remote
control, touch screen or phone numbers record.
Answering function operate as follows:
A: After connecting, the unit
can use the telephone function.
A: Making mobile phone call
After making phone call, the screen will display
making phone call.
B: When there is a phone call,
the Bluetooth will switch to
phone function and display the
calling number.
B: Making touch screen call
Input the numbers on the screen, press [
the numbers;
] icon can correct
C: Touch Transfer icon can
switch to phone answer mode.
Touch it again can return to
Bluetooth function of the unit.
Press [
Press[
] icon to make phone call;
] icon to cancel or hang up.
1357846****
1357846****
1357846****
Note: If the unit does not have this function, pls skip it.
15
Radio Operation
ST/RPT/TA
BAND
APS
Band tuner
Manual tune:
Long press[
Long press[
]button can adust to higher frequency.
]button can adjust to lower frequency.
APS/
MENU
CLK/ /AF
PUSH
ENTER
BAND
Automatically tune:
ST/RPT/TA
SOURCE
VOL
MUTE/PTY
MIC
Short press[
]/[ ]button can search higher frequency and
stop when get one ,long Press[
station.
]/[
]button can store the
Short press[
]/[ ]button can search lower frequency and
AF MUTE/PTY
stop when get one , long press[ ]/[ ]button can store the
station.
BAND
Press BAND button to select among three FM or two AM bands.
(FM1-FM2-FM3-AM1-AM2)
AS/PS
Search Stations
FM 01
FM 02
FM 03
Long press [
] button for more than 3 seconds can
/APS
search stations and store them in 1-6,FM1,FM2,FM3 and
Am1,Am2 automatically.
AM 02
AM 01
Scan Stations
Press [
ST
] button can scan and play every stored
/APS
Stereo
station for about three seconds, if you want to listen to the
recently station, pls press the button to stop scanning.
6 stations can be stored in each FM1,FM2,FM3 and Am1,
Am2 at most.
Press [ST] button, switch between [ MO] and [ST].While
receiving the signal,[ST] back light turns blue.
Loc/DX
Long press [ST], switch between LOC and DX.
Select Stations
Note: If the unit does not have this function, please skip it.
Press[
]or[
] button can select 1-6 stations.
16
Radio Operation
Accessories
External view
External view
AF(Alternative Frequency)
........ Number of items
........ Number of items
Turn "AF",the unit will switch to the stronger signal of the
same station automatically.
1
2
3
............1
............2
............1
TA(Traffic announcement)
Press TA, the unit will prior to seek the traffic information. If the
machine receives the traffic information, it will choose this
signal and quit other radio signal or CD program. If press TA
again, other program will recover and the traffic information
program will quit.
PTY(Program type)
Turn on PTY , then press PTY and 1-6 buttons to
choose one certain program style . After this, the unit will scan
the same style programs automatically. Such as select News
programs. The unit will only scan News programs.
Among AF, TA and PTY, TA has the absolute priority to be chosen.
The use of any accessories except of those provided might result
in damage to the unit .Make sure only to use the accessories
shipped with the unit ,as shown above.
Note: If the unit is without RDS function, pls skip this page.
17
Troubleshooting
What appears to be trouble is not always serious. Please check the following points before calling a service center.
Familiar characters and their meanings
Characters
Causes
Remedies
Clean the disc or change the disc.
Insert the disc correctly.
Insert a disc.
Disc is too dirty.
Disc is inserted upside down.
No disc in the unit.
NO Disc
Disc is extreme dirty.
Clean the disc or change the disc.
Insert the disc correctly.
Bad Disc
Disc is inserted upside down.
The disc is not compatible with
the unit.
Unkown Disc
Region Error
Clean the disc.
Clean the disc.
The disc's region code is not the
same as the unit's.
18
Troubleshooting
General problems
Symptoms
Causes
Remedies
Install a new fuse with correct rating.
Install a new fuse with correct rating.
Reset the unit.
The fuse of the unit has been broken.
The unit cannot be
powered on.
The fuse of car battery has been broken.
False operations and etc.
Battery has been exhausted.
Change the battery.
Remote controller does
not work.
Battery is not installed correctly.
Install the battery correctly.
Correct the connection according to(Electrical
Connections Overall Diagram).
Audio output connection is not correct.
Adjust the volume to the optimum level.
Check the speakers.
The volume level is set to the minimum level.
The speakers have been damagedl.
No sound comes out or
it's hard to hear.
Adjust the balance of audio channel outputs. Please
refer to (Audio control).
The audio channel outputs are not balanced.
The speaker cord is contacted with the
bodywork.
Use insulating cord for connection.
Use original copy disc.
Piratic disc is used.
The speakers power rating does not fit into
the unit output power.
Change the speakers.
Poor sound quality or
sound distortion.
Correct the connection according to(Electrical
Connections Overall Diagram).
The speakers are connected incorrectly.,
The speaker cord is contacted with the
bodywork.
Use insulating cord for connection.
User preset information is
lost when ACC is off.
Correct the connection according to(Electrical
Connections Overall Diagram).
ACC and BATT are connected incorrectly.
19
Troubleshooting
TFT Monitor
Symptoms
Causes
Remedies
No image appears on the
monitor and warning
information is shown at
all times.
Correct the connection according to
(Electrical Connections Overall Diagram).
Incorrect connection of Breaking wire.
The color system of DVD disc is not
suited with the monitor.
Adjust the color system of the DVD disc
or the monitor.
The actual color system is not the same
as the marked color system on the label
for some piratic discs.
Use original copy disc.
Abnormal display like
as pulsatile stripes on
the image and on.
Change the video cord.
The video cord is broken.
The video cord is not connected correctly.
Connect the video cord correctly.
Turn off the power and then turn on the
power again, or change to other playing
source and then go back.
Characters are
abnormal.
False operations.
20
Troubleshooting
Radio Tuner
Symptoms
Causes
Remedies
Correct the connection according to
(Electrical Connections Overall Diagram).
Auto antenna is not extended completely.
It's hard to receive
stations.
Correct the connection according to
(Electrical Connections Overall Diagram).
Auto antenna is not connected with the unit firmly.
LOCAL function is on.
Close the LOCAL function.
Mp3 playback
Symptoms
Causes
Remedies
Change the disc.
Disc is scratched.
Disc is too dirty or wet.
Clean the disc.
Disc cannot be played
back.
Clean the pickup with cleaning disc.
The pickup is dirty.
Disc is inserted upside down.
Insert the disc correctly.
Change the disc.
Disc is scratched.
Disc is too dirty or wet.
Clean the disc.
Interruption occurred during
playback.
Change the disc.
Some contents are damaged.
Disc is not recorded correctly.
Record the disc again.
MP3's name cannot
be displayed correctly.
Use the regular characters.
The name of Mp3 is not regular.
21
Troubleshooting
DVD player
Symptoms
Causes
Remedies
Disc cannot be inserted.
There is a disc in the unit already.
Eject the disc then insert another one.
Change the disc.
Disc is scratched.
Clean the disc.
Disc is too dirty or wet.
The pickup is dirty.
Clean the pickup with cleaning disc.
Change the disc.
Disc cannot be played back.
Disc is not compatible with the unit.
Parental lock class is too high.
Disc is inserted up side down..
Change the parental lock class.
Insert the disc correctly.
The disc 's region code is not the same
as the unit 's.
Change the disc.
Subtitle cannot be shown.
Change another disc containing subtitle files.
There is no subtitle file in the disc.
There is only one audio language/subtitle
in the disc.
Change another disc containing multi-language
audio or subtitle.
Audio language/subtitle
cannot be changed.
There is just one view angle in the disc.
Change another disc containing multi-angle.
Select another segment to play back.
View angle cannot be
changed.
Multi-angle view is not available for the
segment playing back now.
The unit is compatible with copy system; hence
some discs contained the informationof copying
prohibited cannot be played back.
The disc is protected by the copyright.
The disc does not support PBC.
Image distortion.
PBC is invalid when playing
back VCD.
Change another disc with PBC function.
Close PBC function.
Repeat playback or GOTO search
is invalid when playing back VCD.
PBC is on..
22
Specifications
Specifications subject to change without notice.
DISPLAY UNIT
RECEIVING FREQUENCY FIGURE
FREQUENCY
Liquid crystal panel..............................................3.0 inches
Panel weight ..............................................................157g
Number of pixels............................................22,4640 pixels
Display method........................Transparent color filter format
Drive method.........................................................LTPSTFT
Light source.....................................................internal light
(built-in small fluorescent lamp)
Auto
Stepping
KHZ
Tiny
Stepping
KHZ
BAND
AREA
RANGE HZ
87.5-108.0M
522-1620K
100
FM
AM
50
9
EUROPE
9
87.5-107.9M
530-1710K
FM
AM
FM
AM
200
10
200
10
AMERICA
87.5-108.0M
100
10
100
10
SOUTHA MERICA
GENERAL
520-1620K
87.5-108.0M
65.0-74.0M
522-1620K
100
10
9
50
1
FM
2
Operating power................................. ..12 Volts DC, negative
ground
RUSSIA
10
9
FM3
AM
%10THD output wiring.........................Designed for using four
speakers only front and rear
channels cannot be combined
in use with 2speakers.
Load impedance..................................compatible 4 to 8 ohm
speakers
Fuses............................................................ ..........10 amp
Dimensions......................... 187mm(L)x170mm(W)x50mm(H)
Weight.....................................................................1.92Kgs
23
1 Year Limited Manufacturer Warranty -
XO Vision warrants to the original retail purchaser of this product that should this product have any defect,
under normal conditions, such defect(s) will be repaired or replaced with new or reconditioned product
(at the Company's option) without charge for parts and repair labor.
If said product is out of stock, XO Vision has the option to replace it with a similar product or issue a refund at our discretion.
This warranty only covers manufacturer defects and must be returned to company in original condition.
Proof of Purchase is required. This Warranty does not cover the costs incurred for installation, removal, product damages
(i.e. discs, tapes, etc.) or reinstallation of the product.
This warranty is void if company deems the unit to have been damaged through modification, improper installation,
negligence, misuse, or tampering with the Serial number and/or bar code of the unit. This warranty is a limited warranty
for repair/replacement of product if it falls under the above conditions. XO Vision is never responsible for more than the
purchase price of the product.
XO Vision encourages customers to contact the retailer first and only then contact XO Vision for warranty support.
Customer is responsible for shipping the product to us; we cover shipping back to the customer.
In your email, please include the model number, date and place of purchase and the problem. Thank you for purchasing XO Vision.
OWNER'S MANUAL
Before installation and operating the unit please read
this manual thoroughly and retain
it for future reference
|