Vinotemp VT 50SBW User Manual

A P R O U D H E R I T A G E O F E X P E R I E N C E & Q U A L I T Y  
W i n e C e l l a r  
V T - 5 0 S B W  
I n s t r u c t i o n  
M A N U A L  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
1
800.777.8466  
General Operating Instructions:  
Remove all packaging and labels from your wine cellar. Be sure that all parts  
have been included before discarding any packaging materials. You may want  
to keep the box and packing materials for use at a later date.  
Upon receipt of unit and inspection, the supply cord must be replaced if it is  
damaged. Contact our customer service at 1-800-777-8466.  
Let the unit rest, UNPLUGGED for 24 hours once you have it placed in  
your home.  
Please fully read the instruction manual.  
Please read and follow all safety rules  
and operating instructions before using.  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
3
800.777.8466  
TABLE OF CONTENTS  
TEMPERATURE CONTROL  
Setting the temperature control (presets):...............................................8  
Setting the temperature control (manually); ............................................8  
REVERSAL OF DOOR SWING…………………………………………………………………………………………. 10  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
4
800.777.8466  
PARTS AND SPECIFICATIONS  
1. Double-pane window  
2. Grill  
3. Adjustable levelling legs  
4. Shelf  
5. Cabinet  
6. PVC Cover  
7. LED Indicator  
8. Light Switch  
9. Temperature Adjustment  
Type  
1 Temp  
Item Number  
Bottle Capacity  
VT-50SBW  
Approx. 50  
Dimension (HxWxD)  
34.3”×23.9”×22.6”  
Weight  
153.9 Lbs  
2.0Kw.h/24h  
R134a  
Power Consumption  
Cooling System  
Ambient Temp  
86.5°F  
Temperature Range  
4565°F  
Rated Voltage  
Rated Frequency  
Input Power  
115V  
60Hz  
130W  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
5
800.777.8466  
 
IMPORTANT SAFETY INSTRUCTIONS  
When using an electrical appliance, basic precautions should be followed to  
reduce the risk of fire, electric shock, and personal injury.  
1. Use this appliance only as described in this manual. Other users are not  
recommended, as it may cause fire, electric shock or personal injury.  
2. This product is intended for household and commercial use.  
3. To protect against electric shock, do not immerse unit, plug or cord in  
water or other liquids.  
4. Keep away from children.  
5. Unplug from the outlet when not in use, when moving from one location  
to another or before cleaning.  
6. To disconnect the appliance, grip the plug and pull it from the wall outlet.  
Never pull by the cord.  
7. Do not operate the appliance in the presence of explosive and/or  
flammable fumes.  
8. Do not place the appliance or any of its parts near an open flame,  
cooking or other heating appliance.  
9. Do not operate the appliance with a damaged cord or plug. If the  
product malfunctions, or if it is dropped or damaged in any manner, do  
not use.  
10. The use of attachments is not recommended and may be hazardous.  
11. Place the unit on a dry level surface.  
12. Unit is not designed for use in a garage or basement.  
13. Do not operate if the housing is removed or damaged.  
14. A loose fit between the AC outlet (receptacle) and plug may cause  
overheating and a distortion of the plug. Contact a qualified electrician  
to replace loose or worn outlet.  
15. This appliance is designed to be built-in (fully recessed) or free standing.  
16. The wine cellar is intended for use in a controlled ambient location such  
that the ambient temperature does not exceed 90°F (32°C) .  
17. Locate the unit away from direct sunlight and sources of heat (stove,  
heater radiator, etc.). Direct sunlight will affect/alter the outside color of  
the appliance.  
WARNING: To reduce the risk of fire, electric shock or personal injury,  
unplug or disconnect the appliance from the power supply before  
servicing.  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
6
800.777.8466  
 
CORD INSTRUCTIONS  
For your protection, this unit is equipped with a  
3-conductor cord set that has a molded 3-prong  
grounding-type plug, and should be used in  
combination with a properly connected  
grounding-type outlet as shown in figure A.  
OPERATING INSTRUCTIONS  
1. Place your wine cellar on a flat surface that is strong enough to support  
the unit when fully loaded.  
2. This wine cellar is designed to be built-in (fully recessed) or free  
standing.  
3. Do not place heavy objects on top of the unit.  
4. Do not place the unit in a moist place or display in direct sunlight.  
5. Do not place the unit next to a major appliance that emits large  
amounts of heat, such as a dishwasher, microwave, toaster oven, oven  
or barbecue, etc.  
6. Do not plug unit into the same outlet as a refrigerator or microwave.  
7. The unit’s cooling system operates efficiently with an ambient  
temperature of less than 90°F (32°C). Do not install in a garage or  
basement.  
8. Gently place/slide the racks in the wine cellar.  
9. Determine the best setting to use: refer to the temperature guides for  
appropriate serving (see pages 8). An easy reference guide for serving  
temperatures is also found on the inside door.  
10. Place bottles inside the cooler.  
11. Plug the power cord into a standard electrical outlet.  
Important: When using the wine cellar for the first time, allow at least  
24 hours for the internal temperature to adjust properly, Make sure  
there are at least 3 to 5 bottles in the unit.  
ALWAYS REMOVE ALL BOTTLES BEFORE MOVING THE WINE CELLAR  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
7
800.777.8466  
 
TEMPERATURE CONTROL  
Important note: In order to operate efficiently, thermoelectric products  
should be in an environment with an ambient temperature of less than  
90°F (32°C).  
Setting the temperature control (presets):  
For your convenience, The Wine cellar is programmed at storing temperature.  
The temperature pre-set by the manufacturer is 54oF (12oC). The indicator  
shows the temperature of 54oF (12oC).To change the preset temperature in the  
wine cellar, simply press the Preset button until the desired number appears.  
The following sections about storing and serving wines will advise the optimal  
temperature for your wine.  
Setting the temperature control (manually);  
You can manually adjust the temperature. Simply press the (-) button on the  
control panel to decrease the temperature and the (+) button to increase the  
temperature inside the wine cellar. The temperature range is from 45°F (7°C)  
to 65°F (18°C).  
The electronic control and digital display provide an attractive method to  
control temperature. The upper zone will be approximately 8-9 °F (4.4-5oC)  
warmer and the lower zone will be approximately 8-9°F (4.4-5oC) cooler than  
the middle section. The fluctuation of temperature display is normal, fluctuation  
range is about -5 oF~5°F (-2.8oC~2.8oC).  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
8
800.777.8466  
WINE RACK REMOVAL / INSTALLATION  
To prevent damaging the door gasket, make sure to have the door all  
the way opened when pulling shelves out of the rail compartment.  
1. Remove any bottles stored on the racks.  
2. Pull the racks out flatly and press the button in each side. (See figure 1)  
3. Push the racks into sliders. (See figure 2)  
NOTE: As there is a rack equipped with LED indicator. We advice you do  
not remove this rack.  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
9
800.777.8466  
 
REVERSAL OF DOOR SWING  
The door of the wine cellar could be opened either from the left or right side.  
The wine cellar, factory is installed from the left side.  
If you want to reverse the open direction of door, please do as follows:  
1. Disconnect the power, take out all the wines and lay the wine cellar back  
on the ground. Please remember when finished reversing the door, not to  
power up the unit for 24 hours to allow the coolants to settle in the  
compressor.  
2. Remove top hinge cover. Use the special screw driver to remove the three  
screws on the top hinge, then lift up the door to take the door off.  
3. Remove the support wheel on the left bracket.  
4. Unscrew the two screws and remove the grill.  
5. Use the special screw driver to unscrew the six screws on the right  
downward door axis and left bracket.  
5. Install the right bracket and left downward door axis.  
6. Remove the door handle, and fix it on the right of the door, please do as  
following:  
a. Pull the gasket with hand, then you can see four screws (Two screws  
are on the upper of door, and other two screws are on the lower of  
door).  
b. Remove these fixing four screws on the door handle.  
c. Remove the handle, and fix it on the other side of the door. Screw  
four screws on the other side of door. Then embed the gasket to the  
door.  
8. Reinstall the door.  
9. Install the top hinge on the other side.  
10. Screw back in place the top hinge cover, grill and screw covers.  
11. Install the support wheel on the right bracket.  
12. You now have the door fully installed on your desired side.  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
10  
800.777.8466  
CLEANING AND CARE  
Always unplug the wine cellar before cleaning.  
Do not use benzene, scrubbing brushes or chemical cleaners as these will  
damage the unit.  
Use only a mild, nonabrasive cleanser to clean the exterior of the cabinet.  
Clean the stainless steel door and handle by wiping with a warm water  
and baking soda solution. The solution should be about 2 tablespoons of  
baking soda to a quart of water.  
Wash the racks with a mild detergent solution.  
Always dry all the parts with a clean dry cloth before plugging the wine  
cellar back into the receptacle.  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
11  
800.777.8466  
 
TROUBLESHOOTING  
SYMPTOM  
Vibrations  
POSSIBLE CAUSE  
Check to make sure the wine cellar is on a level surface.  
The wine cellar is not on a level surface.  
The racks are out of position.  
The bottle is too long.  
The door will not  
close properly.  
Fan is always  
running.  
This is simply a function of the cooling system. The lower  
the setting, the more the fan will run. If the room is  
warmer than 90°F(32°C), it will run more.  
The unit has been designed to run continuously when  
operation at the lower temperatures.  
Unit has no  
power.  
Check the wall outlet for power. Make sure the outlet is not  
controlled by a wall switch.  
Make sure the cooling vents are not obstructed.  
The room may be too hot. If the ambient temperature is  
90°F(32°C) or higher, the unit can have difficulty chilling  
adequately on the white wine setting.  
The inside  
temperature  
does not seem  
correct.  
When using the unit for the first time, it can take up to 24  
hours to reach the desired temperature.  
It may not be plugged into the wall socket.  
Make sure the wall socket it functional by testing another  
electrical appliance in the power socket.  
The unit does  
not operate.  
Make sure there are at least 3 to 5 bottles in the unit. Allow  
at least 24 hours for the internal temperature to adjust.  
If the room temperature is above 90°F(32°C), the unit will  
not get below 51°F(11°C). Humidity does not affect the  
cooling ability of the unit.  
To achieve accurate temperature control, the unit should  
not be used of operated in any of the following locations:  
o In a sunny place  
Power is ON but  
the unit will not  
cool.  
o In a room with poor air circulation such as a garage near  
another heat-producing appliance such as a dishwasher,  
oven or refrigerator.  
o With an outlet shared with a refrigerator, as the  
refrigerator will drain power from the wine cellar.  
o In a cabinet or closet.  
Make sure the cooling vents are not obstructed.  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
12  
800.777.8466  
 
The unit can be manually set using the + and - symbols.  
Temperature range is 45°F(7°C) to 65°F(18°C).  
The unit uses about as much energy as a 10-watt light  
bulb.  
Note  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
13  
800.777.8466  
LIMITED WARRANTY:  
Vinotemp International (“Seller”) and the person or entity that acquires these goods from Seller (“Purchaser”) hereby  
fully agree to the following terms and conditions of the sale: Shipping fees are the responsibility of the Purchaser  
whether freight prepaid or freight collect. Seller assumes no responsibility for the goods sold to the Purchaser once  
the goods have left the Seller’s premises, including, but not limited to, late delivery by the moving carrier, or for events  
caused by any difficulty carrier incurs in attempting to fit the goods into the Purchaser’s place of business or residence  
due to the size of the goods or otherwise. Purchaser assumes all responsibility for delivery, payment of freight, access,  
measurement, installation, hook-up, wiring, moving and storage of the goods. The transportation of all goods is subject  
to the terms and conditions which the moving carrier imposes on Purchaser including, but not limited to, additional  
charges imposed per flight of stairs, and/or additional charges resulting from the carrier’s inability to safely and/or  
adequately use the building elevator to lift the goods to an upper floor. Any claim for damages incurred during  
shipment by the carrier of the goods are insured and handled directly with the carrier. Any damages due to  
manufacture defects will be handled directly with Vinotemp International, subject to the limited warranty.  
All sales are final, and unless authorized in writing by the Seller, Purchaser may not return the goods, under any  
circumstance. If Purchaser refuses to accept the goods, under any circumstance, the Purchaser is liable for the return  
and cost of freight both ways, and if Seller does take back the goods, there will be a restocking charge that is 35% of  
the purchase price of the goods. Custom Cabinet and Racking are non returnable. Purchaser must notify Seller of non-  
conforming goods within four days of delivery, after which time all goods are deemed accepted. If an order has been  
placed and production has started, cancellation of your order will be a 15% charge.  
If Purchaser tenders payment with a check that has insufficient funds (NSF), or stops payment on a check or credit card  
for any reason, Purchaser agrees to pay for all costs associated with the Seller’s connection or litigation of such a claim,  
including without limitation extra damages, court costs and attorneys’ fees. Finance charges begin the date of invoice.  
Collection fees plus NSF fee of 50$ will be added to your invoice, which you agree to promptly pay. Title to the goods  
does not pass until payment is received in full by Seller and Seller retains a security interest in the goods until they are  
paid for in full.  
LIMITED WARRANTY: Seller warrants that the goods will be free of defects in materials and workmanship as follows:  
Furniture style (wood) wine units: all cooling unit parts for a period of 5 (five) years; cabinetry and labor (uninstalled)  
for a period of 12 (twelve) months from date of sale, removal and re-installation of unit is not included in warranted  
labor. For the metal cabinet wine, beverage, refrigerator and freezer units: parts and labor for cooling system and  
cabinetry for a period of 12 (twelve) months from date of sale, removal and re-installation of unit is not included in  
warranted labor. For a scratch and dent or refurbished unit, warranty is 3 months from your dated invoice (parts for  
function only, not cosmetic). Thermoelectric Units: 90 (ninety) days from the date of sale. (This includes Wine Coolers,  
Beer Dispensers and Refrigerators). Cigar Humidors and Racking Systems are not warranted. Split Systems and  
installed products are parts only for 1 year, no labor. There is no warranty on parts purchased separately. Purchaser’s  
exclusive remedy is limited, at Seller’s option; to repair or replace defective part[s] with either new or factory  
reconditioned part[s]. Purchaser is responsible for shipping the unit pre-paid to designated facility and Seller will pay  
return shipping charges in the continental United States for items repaired under warranty within 12 (twelve) months  
from date of sale. Since the natural variation in texture, density, grain, color, tone and shade of wood is unavoidable;  
Seller does not guarantee the texture, color, tone or shade of the wood: nor does seller guarantee the colorfastness of  
wood or against peeling, chipping, cracking or scratching. Note: Unfinished wood is subject to warping; all wood  
surfaces must be sealed before placing cellar into service. Improper placement of the unit will void the warranty. This  
limited warranty does not cover damage due to such things as accident, misuse, abuse, mishandling, neglect, acts of  
God, fires, earthquakes, floods, high winds, government, war, riot or labor trouble, strikes, lockouts, delay of carrier,  
unauthorized repair, or any other cause beyond the control of the Seller, whether similar or dissimilar to the foregoing.  
Seller is not responsible for any damages caused to Seller’s property resulting from the good. This limited warranty  
applies only inside the Continental US. (Alaska, Puerto Rico and Hawaii are not warranted).  
With Wine Mate products, if the customer calls and the product is “defective”, you must obtain a letter from your  
qualified refrigeration technician at the customers cost, to verify that the unit was installed properly, with proper  
ventilation and the unit is truly malfunctioning due to manufacture defect.  
Purchaser understands and acknowledges that the goods sold here are wine cellars, cigar humidors, and/or other  
similar units which house wine or cigars. Purchaser assumes all risk of using these units, including risk of spoilage,  
humidity variations, temperature variations, leaks, fire, water damage, mold, mildew, dryness and similar and any  
other perils that might occur.  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
14  
800.777.8466  
 
Seller is not responsible for incidental or consequential damages, and there are no warranties, expressed or implied,  
which extend beyond the Limited Warranty described above. The implied warranties of merchantability and of fitness  
for a particular purpose are hereby expressly disclaimed. Some states do not allow the exclusion of incidental or  
consequential damages, or a waiver of the implied warranties of fitness and/or merchantability, so the above limitations  
may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from  
state to state.  
In the event of any dispute between Seller and Purchaser arising out of or relating to these terms and conditions or to  
the goods sold generally, Purchaser must first file a written claim with Seller within ten days of the occurrence giving  
rise to the claim and wait an additional thirty days for a response before initiating any legal action. The sale and all  
terms are subject to California law. Any legal proceeding arising out of or relating to these terms and conditions or to  
the goods sold generally shall be brought solely and exclusively in the County of Los Angeles. In no event may  
Purchaser initiate any legal proceeding more than six months after the occurrence of the event giving rise to the  
dispute.  
The above terms and conditions are the only ones governing this transaction and Seller makes no oral representations  
of any kind. These Terms and Conditions can only be modified in writing, signed by both Purchaser and Seller. 04/08  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
15  
800.777.8466  
SERVICE & IMPORTANT NOTICE  
Upon receipt of unit and inspection, the supply cord must be replaced if it is  
damaged. Contact our customer service at 1-800-777-8466.  
The Manufacturer has a policy of continuous improvement on its products  
and reserves the right to change materials and specifications without notice.  
WARNING  
Please do not place the unit within reach of children.  
For adult use only.  
Contact [email protected] with any questions or visit:  
17621 South Susanna Road,  
Rancho Dominguez, California 90221  
info@vinotemp. com - Fax 310. 886. 3310  
16  
800.777.8466  
 

Yamaha 3D Blu ray Player BD S473BL User Manual
TRENDnet 1000BASE LX User Manual
Toshiba TEC MA 1400 100 User Manual
SV Sound SVS Sound Car Speaker PB12 NSD User Manual
Soundstream Technologies 5.2 User Manual
Sony WM EX900 User Manual
Sony TRV25TRV27 User Manual
Sony HANDYCAM HDR CX100 User Manual
Sony Cyber shot DSC G1 User Manual
Sony CDX L600X User Manual