Blu-ray Disc™/DVD Player
BDX2150KU/BDK21KU
Owner’s Manual
Important Safety Information
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, andthe
point where they exit from the apparatus.
SAFETY PRECAUTIONS
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
CAUTION: VISIBLE LASER RADIATION WHEN
OPEN. DO NOT STARE INTO BEAM.
used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
AVIS
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
WARNING:TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with an arrowhead symbol,
within the equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
or has been dropped.
ADDITIONAL SAFETY INSTRUCTIONS
15. Do not overload wall outlets;extension cords, or integral
convenience receptacles as this can result in a risk of
fire or electric shock.
16. Never expose the apparatus to dripping or splashing or
place items such as vases, aquariums, any other item
filled with liquid, or candles on top of the unit.
17. Keep your fingers well clear of the disc tray as it is
closing.Neglecting to do so may cause serious personal
injury.
The exclamation point within the equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in this
owner’s manual.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSETHIS APPLIANCE
TORAINORMOISTURE.DANGEROUSHIGHVOLTAGES
ARE PRESENT INSIDE THE ENCLOSURE. DO
NOT OPEN THE CABINET. REFER SERVICING TO
QUALIFIED PERSONNEL ONLY.
18. Do not place anything on top of this unit.
19. Do not place the apparatus on amplifiers or equipment
that may produce heat.
20. Never block or cover the slots or openings in the unit.
Never place the unit: 1) on a bed, sofa, rug or similar
surface; 2) too close to drapes, curtains, or walls; or 3)
in a confined space such as a bookcase, built-in cabinet,
or any other place with poor ventilation.
The symbol for Class II
(Double lnsulation)
The slots and openings are provided to protect the
unit from overheating and to help maintain reliable
operation.
21. Do not use a cracked, deformed, or repaired disc.These
discs are easily broken and may cause serious personal
injury and apparatus malfunction.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong.The wide
blade or the third prong is provided for your safety. If
22. If the apparatus should emit smoke or an unusual odor,
immediately disconnect the power cord from the wall
outlet. Wait until the smoke or smell stops, then ask
your dealer for a check and repair. Neglecting to do so
may cause fire.
23. During thunderstorms, do not touch the connecting
cables or the apparatus.
24. Warning:To prevent spread of fire, keep candles or other
open flames away from this product at all times.
25. Mains plug is used as disconnect device and it should
remain readily operable during intended use. In order
to disconnect the apparatus from the mains completely,
the mains plug should be disconnected form the mains
socket outlet completely.
3
Important Safety Information
CAUTION:
On Placement
•
•
To prevent direct exposure to laser beam, do not try to
open the enclosure.Visible and invisible laser radiation
when open and interlocks defeated. DO NOT STARE
INTO BEAM.
Do not use this unit in places which are extremely hot,
cold, dusty or humid.
•
Do not restrict the air flow of this unit by placing it
somewhere with poor air flow, by covering it with a
cloth, or by placing it on bedding or carpeting.
Be sure to remove the disc and unplug the AC power
cord from the outlet before carrying the unit.
•
Use of controls or adjustments or performance of
procedures other than those specified may result in
hazardous radiation exposure.
•
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
On Safety
•
Do not handle the AC power cord with wet hands and
do not put your fingers or objects into the unit.
When connecting or disconnecting the AC power
cord, grip the plug and not the cord itself. Pulling the
cord may damage it and create a hazard.
Warning: Batteries shall not be exposed to excessive heat
such as sunshine, fire or the like.
•
FCC Information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
The party responsible for compliance to these rules is:
Toshiba America Information Systems, Inc.
•
When you are not going to use the unit for a long
period of time, disconnect the AC power cord.
On Condensation
•
When left in a heated room where it is warm and
damp, water droplets or condensation may form
inside the equipment. When there is condensation
inside the unit, the unit may not function normally. Let
the unit stand for 1-2 hours before turning the power
on or gradually heat the room and allow the unit to dry
before use.
9740 Irvine Blvd., Irvine, CA 92618.
Ph: 1-800-631-3811
Note:This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
On Recycling
•
This unit’s packaging materials are
recyclable and can be reused. Please
dispose of any materials in accordance
with your local recycling regulations.
Batteries should never be thrown away
or incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.
•
Products that earn the ENERGY STAR®
prevent greenhouse gas emissions by
meeting strict energy efficiency guidelines
set by the U.S. Environmental Protection
Agency and the U.S. Department of Energy.
ENERGY STAR and the ENERGY STAR
mark are registered U.S. marks.
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
-
-
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated with
minimum distance 20cm between the radiator and your
body.
This class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
WARNING: Changes or modifications to this unit not
expressly approved by Toshiba, or parties authorized by
Toshiba, could void the user’s authority to operate the
equipment.
4
Supplied Accessories
Remote Control with Batteries (AAA x 2) .............. x 1
Owner’s Manual..................................................... x 1
Quick Start Guide.................................................. x 1
“DVD” is a trademark of DVD Format / Logo Licensing
Corporation.
HDMI Cable(only included for BDK21KU model) .. x 1
Symbols Used in this Manual
x.v.Color and x.v.Color logo are registered trade-
marks of Sony Corporation.
To specify for which media type each function is, we put
the following symbols at the beginning of each item to
operate.
Symbol
Description
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
Description refers to BD-video and BD-
RE / BD-R recorded in BDMV format
Description refers to DVD-video
Description refers to Audio CD / DTS-CD
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
Description refers to DVD-RW/-R with
AVCHD files
Description refers to BD-RE/-R, DVD-
RW/-R and CD-RW/-R
Description refers to BD-RE/-R, DVD-
RW/-R and CD-RW/-R
Description refers to BD-RE/-R, DVD-
RW/-R and CD-RW/-R
Blu-ray
Disc™,
Blu-ray™,
BD-Live™
and
If you do not find any of the symbols listed above under
the function heading, the operation is applicable to all
media.
BONUSVIEW™ and the logos are trademarks of the
Blu-ray Disc Association.
Trademark Information
BLOCKBUSTER name, design and related marks are
trademarks of Blockbuster L.L.C. © All rights reserved.
Netflix is a registered trademark of Netflix Inc.
VUDU is a trademark of VUDU, Inc.
CinemaNow is a registered trademark of Best Buy, Inc.
YouTube is a registered trademark of Google, Inc.
Pandora is a registered trademark of Pandora Media,
Inc.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories.
Picasa is a trademark of Google, Inc.
Windows Media and theWindows logo are trademarks
or registered trademarks of Microsoft Corporation in
the United States and/or other countries.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,392,195; 7,272,567; 7,333,929; 7,212,872 & other
U.S. and worldwide patents issued & pending. DTS-
HD, the Symbol, & DTS-HD and the Symbol together
are registered trademarks & DTS-HD Master Audio
Oracle and Java are registered
trademarks of Oracle and/or its
affiliates. Other names may be
trademarks of their respective
owners.
|
includes software. © DTS, Inc. All Rights Reserved.
Essential is
a
trademark of DTS, Inc. Product
5
Features
Blu-ray Disc™
x.v.Color®
You can enjoy Blu-ray Disc™ which is capable of storing
five times more data than a conventional DVD.
This unit supports playback of video contents on discs
recorded with “x.v.Color” technology. To watch this video
content with the “x.v.Color”, a TV or other display device
supporting both video image reproduction using the
“x.v.Color” standard and capable of manually switching its
color setting is required.Please refer to the owner’s manual
of your display device for further information.
BD-Java
With some Blu-ray Disc™ which support Java applications,
you can enjoy the interactive functions such as games or
interactive menus.
Easy and simple connection to your HDTV via
HDMI®
BD-Live™
BD-Live™ (BD-ROM version 2 Profile 2.0) that allows
interactive functions to be used when this unit is connected
to the Internet in addition to the BONUSVIEW function.The
various functions differ depending on the disc.
Connect this unit to your HDTV with one single HDMI (High-
Definition Multimedia Interface) cable. It is recommended
to use a High Speed HDMI Cable for better compatibility.
The high definition video output signal will be transferred
to your HDTV without conversion to analog signals, so you
will get excellent picture and sound quality.
Full high-definition video playback
Watch movies in the highest picture quality available
for your HDTV. This unit offers full high-definition video
playback up to 1080p resolution for an amazing viewing
experience. A highly detailed picture and increased
sharpness delivers a more true-to-life picture.
Thanks to other multiple outputs, you can also easily
connect to your home theater system or amplifier.
HDMI® CEC (Consumer Electronics Control)
This unit supports HDMI CEC, which allows integrated
system control over HDMI and is part of the HDMI
standard.
DVD Upconversion for enhanced picture quality
Your current DVD will look even better than before thanks
to video upconversion. Upconversion will increase the
resolution of standard definition DVD to high definition up
to 1080p over an HDMI connection. The picture will be
less jagged and more realistic for a near high-definition
experience.
This function may not work properly on some devices.
HDMI 1080p/24F output (Blu-ray Disc™ only)
This unit is equipped with a feature which can provide
the smooth movement in the playback of film originated
material with the frame rate of 24 frames per second with
progressive scan.(Available only when theTV is connected
by an HDMI cable and compatible with 1080p/24F frame
input.)
Enjoy your content on different kinds of media
Full backwards compatibility with Blu-ray Disc™, DVD and
CD ensures that you can continue to enjoy your current
audio-video collection. Additionally, you can view JPEG
digital pictures or listen to MP3 or Windows Media™
Audio music files.
Copyright protection system
To play back the digital video images of a Blu-ray Disc™
/ DVD via an HDMI connection, it is necessary that
both the unit and the TV (or an AV amplifier) support
a copyright protection system called HDCP (high-
bandwidth digital content protection system). HDCP is
copy protection technology that comprises data encryption
and authentication of the connected AV device. This unit
supports HDCP. Please read the operating instructions of
your TV (or AV amplifier) for more information.
PIP (BONUSVIEW™)
Some BD-videos have the PIP function which enables you
to display the secondary video in the primary video. You
can call up the secondary video by pressingBONUSVIEW
whenever the scene contains the secondary video.
Pop-up menu
Some BD-video have pop-up menu which is a navigation
menu that can be called up and be operated on the TV
screen without interrupting the playback.You can call up the
pop-up menu by pressing POP/TOP or MENU.Contents in
the pop-up menu vary depending on the disc.
Playing back AVCHD files
This unit supports playback of AVCHD format files (new
format for high definition video camcorders) recorded on
disc. Your high definition personal archive is playable in
HD quality.
6
Identification of Controls
Front Panel
1
2
3 4
5
6
7
1. Disc tray
6. PLAY
button
2. Power indicator
3. Remote sensor
7. POWER button
•
Press to turn on the unit, or to turn the unit into
the standby mode. (To completely turn off the
unit, you must unplug the AC power cord.)
4. OPEN/CLOSE
5. STOP button
button
Rear Panel
1
2
3
4
5
1. AC power cord
4. USB Port
Use to connect a USB flash drive/wireless LAN
adapter (not included).
5. LAN terminal
Use to connect a network equipment with LAN
cable.
•
Connect to a standard AC outlet to supply power
to this unit.
•
•
Unplug this cord from the AC outlet to completely
turn off the unit.
•
2. COAXIAL DIGITAL AUDIO OUT jack
•
Use to connect an AV receiver / amplifier, Dolby
Digital / DTS decoder or other device with a
coaxial digital audio input jack using a coaxial
digital audio cable.
3. HDMI OUT jack
•
Use to connect a TV with an HDMI compatible
port via an HDMI cable.
*
HDMI connection is required. Cables are
not included for BDX2150KU model. Analog
connection is not supported.
7
Identification of Controls
Remote Control
No. Item
Description
POWER
OPEN/CLOSE Press to open or close the disc
tray.
1
2
3
1
13
14
Press to display the search
menu.
GOTO
During playback, press to fast
reverse the playback.
REV
•
During playback, press once
to return to the beginning
of the current title, chapter,
track or file.
GOTO
Clear
2
15
16
HOME MENU MENU BONUS VIEW POP/TOP
•
•
During playback, press twice
to return to the previous title,
chapter, track or file.
4
SKIP
REV
PLAY
STOP
FWD
During the JPEG playback,
press to return to the previous
file.
17
18
19
20
3
4
5
SKIP
SKIP
INFO
PAUSE
STEP
Press to pause playback.
PAUSE
STEP
SLOW
Press to advance one frame.
Press to play back the disc in
slow motion.
5
SLOW
INFO
Press
information.
to
display
disc
21
OK
Press to return to the previous
menu.
6
7
RETURN
RETURN
NETFLIX
Press to turn random function
on or off for Audio CD, MP3 or
WMA disc.
6
22
23
RANDOM
ANGLE
Press to select a viewing angle
if multiple angles are available
on the disc.
RANDOM ANGLE
PIC RESOLUTION
8
7
8
9
10
24
25
26
27
SUB AUDIO 2nd. SUB 2nd. AUDIO
A-B REPEAT
SUB
Press to display the subtitle
menu.
9
(SUBTITLE)
11
12
10
AUDIO
Use to select the audio mode.
Press to play back a defined
section between point A and B
repeatedly.
11
12
A-B
SE-R0402
Press to toggle between
various repeat modes.
REPEAT
POWER
Press to turn on the unit, or to
turn the unit into the standby
mode. (To completely turn off
the unit, you must unplug the
power cord.)
13
8
Identification of Controls
No. Item
Description
In playback mode, use to adjust
picture quality according to
your preference (Actual effect
to picture may vary depending
on TV.):
•
In playback mode, press
GOTO, then press the
number buttons to enter a
title, chapter, track, time or
file number.
Number but-
tons
25
PIC
14
15
•
E.P.M (Enhanced Picture
Mode):The picture is sharper
with enhanced color.
•
In menu mode, press to enter
the parental code password.
•
Sharpness
CLEAR
Press to clear an input error.
In PIP mode, press to turn the
audio for the secondary video
on or off.
Press to display the Connected
in home menu.
HOME MENU
MENU
26
27
2nd. AUDIO
Press to display disc menu.
In PIP mode, press to turn
the subtitle for the secondary
video on or off.
2nd. SUB
Press to switch picture-in-
picture feature on or off (only
applicable to BD-video which
supports the PIP function).
(SUBTITLE)
BONUSVIEW
16
Installing batteries
•
During
Blu-ray
playback, press to open
Disc
a
Install the batteries (AAAx2) matching the polarity indicated
inside battery compartment of the remote control.
menu that lets you control
Blu-ray Disc playback.
POP/TOP
Open the cover.
•
During DVD playback, press
to open the DVD menu (if
available).
1
During playback, press to fast
forward the playback.
17
18
FWD
Press to start playback or
resume playback.
PLAY
Insert batteries.
•
During playback, press to skip
to the next title, chapter, track
or file.
2
19
SKIP
•
During the JPEG playback,
press to go to the next file.
20
21
Press to stop playback.
STOP
Make sure to match the + and – on the batteries to
the marks indicated in the battery compartment.
Press to select items or
settings.
/
/
/
Press to confirm or select
menu items.
Close the cover.
OK
3
Caution: Never throw batteries into a fire.
Notes:
Press to use Netflix service
directly. (Make sure your Blu-
ray Disc™ player is correctly
connected to the internet and
network settings are properly
configured.)
22
NETFLIX
•
•
Do not mix different battery types or combine used
batteries with new ones.
If the remote control does not operate correctly, or if
the operating range becomes reduced, replace both
batteries with new ones.
•
Press to select items
on some Blu-ray Disc™
contents.
RED / GREEN
/ BLUE /YEL-
LOW
•
If the batteries are dead or if you will not be using the
remote control for a long time, remove the batteries
to prevent battery acid from leaking into the battery
compartment.
23
24
•
When file list / thumbnail list
is shown, press to switch
between pages.
Press to select the video
resolution in full stop mode.
RESOLUTION
9
Identification of Controls
Operating with the remote control
* Do not expose the remote sensor of the Blu-ray Disc™
player to a strong light source such as direct sunlight
or other illumination. If you do so, you may not be able
to operate the Blu-ray Disc™ player via the remote
control.
Point the remote control at the remote sensor
and press the buttons.
Notes:
•
Direct the remote control at the remote sensor of the
Blu-ray Disc™ player.
•
When using the remote control, press the buttons at
intervals of about 1 second to ensure the correct mode
of operation.
POWER
•
•
Do not drop or give the remote control a shock.
Do not leave the remote control near an extremely hot
or humid place.
•
Do not spill water or put anything wet on the remote
control.
Distance: About 5 m from the front of the remote
sensor.
•
•
Do not open the remote control.
Angle:
About 30° in each direction of the front of the
remote sensor.
If the remote control is not going to be used for a long
time, remove the battery to avoid damage caused by
battery leakage corrosion.
Connections
Connecting to a TV using an HDMI® cable
This connection provides better picture quality and supports up to 1080i/1080p, 1080p/24F resolution.
Connect a HDMI cable from the HDMI output jack on this product to the HDMI input jack on the TV.
High
Definition
TV
HDMI Cable
(only included for
BDK21KU model)
HDMI IN
HDMI OUT
Notes:
•
HDMI connection is required. Cables are not included for BDX2150KU model. Analog connection is not
supported.
•
Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the
connector are matched.
•
•
When using a non-HDCP compatible TV, the image will not display properly.
An HDMI cable carries both video and audio signals. If you want to use TV speakers, you do not need to make an
additional audio connection if you are using an HDMI cable.
10
Connections
Connecting to a digital amplifier/AV receiver
Route the sound from this player to other device to enhance audio output.
•
•
Connect a coaxial cable from the COAXIAL DIGITAL jack on this product to the COAXIAL jack on the device.
If your AV receiver or amplifier has an HDMI jack, you can also connect the HDMI cable to HDMI IN jack on your AV
receiver or amplifier.
AV receiver / amplifier
DIGITAL AUDIO INPUT
COAXIAL
digital audio coaxial cable
(not included)
Connecting to network
Your Blu-ray Disc™ player can be connected to your home network:
•
By connecting an Ethernet cable to the ETHERNET jack on the rear of your player and to a wired hub or router. Using
a wired network provides the best performance, because the attached devices connect directly to the network and
are not subject to radio frequency interference.
Connecting your player to a wired router
•
Connect an Ethernet cable (CAT5 or better with RJ45 connector) to the ETHERNET jack on the back of your player
and to an Ethernet jack on a hub or broadband router.
Hub or broadband router
Networking equipment
(modem, etc.)
Notes:
•
Do not connect a modular
p h o n e c a bl e t o t h e
ETHERNET jack.
WAN
LAN
1
LAN
•
When plugging or unplugging
the cable, hold the connector
on the end of the cable.
When unplugging, do not
pull on the cable.Press down
the lock tab and pull the
connector out of the jack.
Because there are various
connection configurations,
follow the instructions from
your telecommunication
carrier or Internet service
provider.
5
4
3
2
LAN cable
LAN cable
•
Internet
LAN
11
Connections
Connecting your player to a wireless access point or router (Need the optional Wi-Fi unit which is sold
separately)
Your Blu-ray Disc™ player can also be connected to network with a Wireless access point.
1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the
USB port on the rear panel of the Blu-ray Disc™ Player, and set the wireless network options.
2. After the Wi-Fi device is inserted into the USB port, press
enter.
(For detailed information, please refer to the user guide for WLM-10UB1 or WLM-10NB1.)
/
to select “Network” from Settings, and press OK to
Notes:
•
•
•
This unit is compatible with TOSHIBA’s Wireless
LAN Adapter only.
Model name: WLM-10UB1 or WLM-10NB1
You must use a wireless IP sharer that supports
IEEE 802.11 a/b/g/n. (n is recommended for
stable operation of the wireless network.)
Wireless LAN, in its nature, may cause
interference, depending on the use condition
(AP performance, distance, obstacle, interference
by other radio devices, etc.).
USB
•
•
Set the wireless IP sharer to Infrastructure mode.
Ad-hoc mode is not supported.
Wireless access point
Modem Port
When applying the security key for the AP
(wireless IP sharer), only the following is
supported.
1) Authentication Mode : WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES
For models without built-in Wi-Fi®, BD-Live™
is only supported via Ethernet so when using
single USB port for internet access, BD-Live™
will not be available.
Wireless LAN
Adapter
•
Modem Cable
Connecting a USB Flash Drive
A USB flash drive provides an additional memory to
software upgrade and enjoy BD-Live™ bonus content.
You can also enjoy playing back MP3/WMA/JPEG files
stored in the USB flash drive.
Inserting a USB flash drive into the USB port on the back
of Blu-ray Disc™ player until it clicks.
Notes:
•
•
Connect only a USB flash drive to the USB port on this product.
If you cannot easily insert the USB flash drive, you may have
inserted it incorrectly. Try to turnover the device and then insert
again.
USB
•
•
Do not remove the USB flash drive during playback.
BD-Live™: Access to BD-Live™ requires use of USB flash drive
(not included) installed in the USB port.For additional information
regarding the access to BD-Live™, see page 21 of the manual.
TOSHIBA does not guarantee 100% compatibility with all USB
flash drives.
USB Flash Drive
•
CAUTION: If you want to enjoy BD-Live™ bonus content, you should
connect a USB flash drive to USB port, and an Ethernet cable to the
ETHERNET jack on the back of your player and to an Ethernet jack on
a hub or broadband router.
12
Playback
Information on Playback
Before you start playing back a disc, read the following
information.
Unplayable Discs and Files
The following discs will not be played back in this unit.
•
•
•
•
•
•
•
•
•
•
•
CD-ROM
CD-I (compact disc-interactive)
DVD-RAM
VSD (video single disc)
DVD-audio
HD DVD
VIDEO CD
Unfinalized disc
Playable Discs and Files
This unit is compatible to play back the following discs
/ files.
To play back a disc / file, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos.
SACD
Other disc types are not guaranteed to play back.
Blu-ray Disc™ / DVD containing DivX® files.
Blu-ray Disc™ / DVD hybrid disc (played back as a BD-
video only)
Playable discs
Blu-ray Disc™
Logos
•
•
Blu-ray Disc™ that contains AVCHD files
DVD-RW/-R recorded in non compatible recording
format.
Super Audio CD - Only the sound on the CD layer can
be heard. The sound on the high-density Super Audio
CD layer cannot be heard.
Playability of dual discs are not guaranteed.
Multi session disc
Multi border disc
- BD-ROM (single / dual layer)
- BD-RE (single / dual layer)
(Recorded in BDMV format)
- BD-R (single / dual layer)(Re-
corded in BDMV format) (Un-
closed discs may not be played
back.)
•
•
•
•
DVD-ROM
DVD-RW
DVD-R
Region Codes
This unit has been designed to play back BD-video with
region “A” and DVD-video with region “1” or “ALL”. You
cannot play back BD-video or DVD-video that are labeled
for other regions.Look for the symbols on the right on your
BD-video or DVD-video.
If these region symbols do not appear on your BD-video
or DVD-video, you cannot play back the disc in this unit.
The letter or number inside the globe refers to region of
the world. A BD-video or DVD-video labeled for a specific
region can only be played back in the unit with the same
region code.
CD-DA (audio CD)
CD-RW
CD-R
DTS-CD
-
BD-video
Playable files
Media
AVCHD
DVD-RW/-R
MP3
DVD-video
BD-RE/-R, DVD-
RW/-R, CD-RW/-R
Windows MediaTM Audio
JPEG
Color System
BD-video and DVD-video are recorded in different color
systems throughout the world. The most common color
system is NTSC (which is used primarily in the United
States and Canada).
•
This unit cannot playback the disc contents protected
by Windows Media™ Digital Rights Management
(DRM).
13
Playback
Structure of Disc Contents
Place the disc on the disc tray.
The contents of Blu-ray Disc™ / DVD / AVCHD are
generally divided into titles. Titles may be further
subdivided into chapters.
3
With the playback side
down
TM
Blu-ray Disc / DVD / AVCHD
title 1 title 2
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
4 Press OPEN/CLOSE to close the disc tray.
Playback starts.
Audio CD is divided into tracks.
If you insert a Blu-ray disc or a DVD that
contains a top menu, a menu may appear. Use
audio CD
track 3
track 1
track 2
track 4
track 5
/
then press OK to start playback.
/
/
to select the title you want to view,
•
You may need to press the POP/TOP or MENU
button to display disc menu (depending on the
actual Blu-ray disc or DVD.)
Data discs or USB flash drives containing MP3 / WMA
/JPEG are divided into folders, and the folders are
subdivided into files.
To start playback in stop mode
Press PLAY.
MP3 / WMA / JPEG
folder (group) 2
file 4
folder (group) 1
file 1
To pause playback (still mode)
file 2
file 3
file 5
Press PAUSE during playback.
To resume normal playback, press the PLAY button.
• The sound is muted during still mode.
To stop playback
Press STOP. The home menu is displayed.
For Blu-ray discs, press
then press OK to start playback at the beginning of
/
to select BD-ROM,
the disc.
Basic Playback
Preparations
For DVDs/audio CDs, press
normal playback.
PLAY to resume
•
When you want to view a disc, turn on the TV and select
the video input connected to the Blu-ray Disc™ player.
• Depending on the disc, playback starts where it
stopped or at the beginning of the disc.
• If you press
completely. To stat playback again, press
Playback starts at the beginning of the disc.
STOP twice, playback stops
PLAY.
CAUTION:
Keep your fingers well clear of the disc tray as itis closing.
Neglecting to do so may cause serious personal injury.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Press the POWER button.
1
POWER
Be sure to press the OPEN/CLOSE
button to close the disc tray after you
remove the disc.
The Blu-ray Disc™ player
turns on.
To turn the power off
Press POWER button to turn the unit off.
Press OPEN/CLOSE.
2
The disc tray opens.
14
Playback
Variable Speed Playback
Locating a Desired Section
You can play discs at various speeds, and resume playback
from the location where you stopped playback.
Normally, Blu-ray discs and DVDs are divided into titles,
and the titles are sub-divided into chapters. Audio CDs
are divided into tracks.You can quickly locate any specific
title, chapter, or track.
Playing in fast reverse / forward directions
Locating a title using the pop/top menu
Press
or
during playback.
FWD
: Fast forward playback
: Fast reverse playback
Press POP/TOP.
REV
1
POP/TOP
The pop/top menu appears on the
TV screen.
Each time you press this button, the fast-forward
or fast-reverse speed changes in the following
sequence:
Press
want.
/
/
/
to select the title you
Fast x 2
Fast x 4
Fast x 8
Fast x 16
2
3
If the titles in the top menu are assigned a
number, you can directly locate a specific title
by pressing its designated number with the
number buttons.
Fast x 32
Fast x 64
Fast x 128.
To resume normal playback
Press PLAY.
Notes:
Press OK.
•
The Blu-ray Disc™ player mutes sound and subtitles
during reverse and forward scan.
The playback speed may differ depending on the disc.
Playback starts from Chapter 1 of the selected
title.
•
Playing frame by frame
Locating a specific chapter or track
Press
during still playback.
STEP
Each time you press this button, the picture
advances one frame.
Press
or track number you want.
or
repeatedly to access the chapter
To resume normal playback
Press PLAY.
Playback starts from the selected chapter or track.
SKIP
: Playback starts from the beginning of the current
chapter or track.When you press twice in quick
successions, playback starts from the beginning
of the preceding chapter or track.
Note: The sound is muted during frame by frame playback.
Playing in slow motion
SKIP
: To locate succeeding chapters or tracks.
Press
during playback.
SLOW
Each time you press this button, the slow-
motion speed changes in the following
sequence:
Note: Some titles may not display chapter numbers.
Slow x 1/2
Slow x 1/4
Slow x 1/8
To resume normal playback
Press PLAY.
Notes:
•
•
The sound is muted during slow-motion playback.
3 speeds are available.
15
Playback
Accessing a Specific Location Directly
Locating a specific title/chapter/time
Press GOTO.
(Press GOTO once)
1
The Goto menu appears on the TV screen.
Goto File:
/ 21 (Current: 10)
GOTO
e.g.
1
2
3
a. Press the GOTO button once:
:
the desired file number
1
2
3
: the total file number
Goto Title:
/ 4 (Current: 1)
: the currently playing file number
(Press GOTO twice)
1
2
3
:
the desired title number
1
2
3
: the total title number
: the currently playing title number
Goto Time:
:
:
/ 01:50:46 (Current: 0:05:52)
1
2
3
:
the desired time (hh:mm:ss)
1
2
3
b. Press the GOTO button twice:
: the total time
: the elapsed time
Goto Chapter:
/ 30 (Current: 1)
Press the number buttons to enter title,
chapter (track) number or time.
1
2
3
2
3
:
the desired chapter number
1
2
3
While accessing the TIME using number
buttons, just enter 2 digits in order.
: the total chapter number
: the currently playing chapter number
The first two numbers you entered represent
hours.
The second two numbers you entered
represent minutes.
c. Press the GOTO button for 3 times:
The third two numbers you entered represent
seconds.
Goto Time:
:
:
/ 01:50:46 (Current: 0:05:52)
Press the CLEAR button to reset the
numbers.
1
2
3
Press OK.
:
the desired time (hh:mm:ss)
1
2
3
: the total time
Playback starts from the selected section.
: the elapsed time
(Press GOTO once)
Goto Track:
/ 21 (Current: 10)
1
2
3
:
the desired track number
: the total track number
: the currently playing track number
1
2
3
16
Playback
Playing in a Random Order
Repeating a Title, Chapter,Track or Specific Segment
Repeating a title, chapter or track
Playing tracks or files in a random order
Press REPEAT repeatedly to select the desired
repeat mode during playback.
Press RANDOM repeatedly to select Random ON
during playback.
e.g.
Once you turn RANDOM function on, the RANDOM
indicator will be activated and the system will play
all files in a random sequence.
Repeat Off
Repeat Off
Repeat Title
Repeat All
Repeat Chapter
Repeat Track
Repeat Off
Repeat Off
To resume normal playback
Press RANDOM repeatedly until
displayed.
“
”
is
Random Off
PIP (BONUSVIEW™) Setting
Repeat Off
Repeat Off
Repeat All
Repeat All
Repeat File
Repeat Off
Some Blu-ray discs have the PIP function which enables
you to display the secondary video in the primary video.
You can call up the secondary video by pressing BONUS
VIEW whenever the scene contains the secondary video.
See the documentation that came with the disc for playback
instructions.
Repeat Off
Notes:
•
•
•
•
•
The repeat setting will be cancelled when you stop
playback.
The chapter, title or track repeat will be cleared when
moving to another chapter, title, track / file or folder.
Repeat playback does not function during A-B repeat
playback.
Chapter and title repeat are not available with some
scenes.
When the repeat setting is set for a MP3 or WMA folder
(file), the repeat setting will be cancelled if you select other
MP3 or WMA folder (file) to playback.
Press BONUS VIEW during playback to turn
PIP mode on.
1
BOUNS VIEW
Press 2nd. AUDIO to turn the audio for the
video in the PinP window on or off.
2
2nd. AUDIO
Repeating a specific segment
Press 2nd. SUB to turn the subtitle for the video
in the PinP window on or off.
3
Press A-B at the desired starting point A
during playback.
2nd. SUB
1
2
Press A-B at the desired ending point B
during playback.
The Blu-ray Disc™ player automatically returns
to point A and starts repeat playback of the
selected segment (A-B).
Primary video
To resume normal playback
Secondary video
Press A-B until
is displayed.
Repeat Off
Notes:
•
•
Some discs may not permit A-B repeat operation.
You can specify a segment only within the current title or
track.
You cannot set the A-B repeat function for a segment that
includes multiple camera angles.
To resume normal playback
Press BONUS VIEW to turn off the PIP mode.
•
•
Note: PIP audio cannot be heard unless Bitstream
Mixed has been selected on the Audio menu. For more
information, see “Audio Setting” on page 23.
A-B repeat does not function during chapter, title, track or
all repeat playback.
17
Playback
Camera Angle
Subtitle Selection
Some BD-video and DVD-video contain scenes which have
been shot simultaneously from various angles.
During playback, press SUB.
1
2
During playback, press ANGLE.
1
Subtitle
01/07 ENG
N/A
The selected angle will be displayed on the
display bar at the top of the TV screen.
PIP Subtitle
In the example “01/07 ENG”,
Angle
01/03
“01” indicates the currently selected subtitle.
“07” indicates the total number of subtitles.
“ENG” indicates the subtitle language.
The first digit indicates the current viewing
angle, and the second digit indicates the total
number of viewing angles.
Press , then use
angle.
/
to select the desired
Press , then use
angle.
/
to select the desired
2
Displaying On-screen Information
Audio Selection
You can check information about the current disc by
pressing INFO.
During playback, press AUDIO.
1
Title 1 Chapter 1/25
BD-ROM
0:02:00
1:57:35
Audio
01/03 ENG Dolby TrueHD
01/03 ENG Dolby TrueHD
Off
Play
PIP Audio
In the example “01/03 ENG Dolby TrueHD”,
“01” indicates the currently selected audio
channel.
“03” indicates the total number of audio
channels.
Title 1 Chapter 1/18
0:02:00
DVD
1:57:35
Off
Play
“ENG” indicates the audio language.
“DolbyTrueHD”describes the currently selected
audio format.
Track 1/12
0:00:20
Press , then use
audio language and audio format.
/
to select the desired
CD-DA
0:05:35
Off
Off
Play
2
Notes:
File: 1/5 song1.mp3
Title: Cool Track
•
The available options of Audio vary from different disc
format.
Artist: Ricardo Funiccio
Album: Dead Dux
•
PIP Audio is not available for all discs. It only applies to
Blu-ray discs that supports picture-in-picture features.
Off
Off
Play
0:02:00
0:30:00
File: 4/13 flower.jpg
Off
Pause
18
Playback
Playing AVCHD/MP3/WMA/JPEG Files
Settings: This option enables you to define Slide
Show Effects (None, Horizontal Scroll, Fade and
Shutter) and Slide Show Delay (5 Seconds, 2
Seconds, 1 Second, No Delay, 10 Seconds, 15
Seconds and 30 Seconds). After setting, press to
highlight Ok and then press OK to confirm.
You can play AVCHD, MP3, WMA or JPEG files that have
been recorded on a disc on the Blu-ray Disc™ player.
Playing files on a data disc
When you insert a data disc containing picture, music, or
video files into your player, icons are added to the menu
to indicate that video, music, or picture files are available
for playback.
Slide Show Effects
Slide Show Delay
None
No Delay
Ok
Press OPEN/CLOSE to open the disc tray,
place a disc that contains video/
JPEG files.
Main Menu: Returns to the main menu.
MP3/
1
2
Previous Folder: This item only appears if your
optical disc or USB flash drive contains several
different picture folders.
In Home Menu, press
and then press
/
to select Media,
Start Slide Show: This option enables you to view
picture (files) one after another automatically.
,
If a USB flash drive containing music is inserted
at the same time, the system will enter the
source selection screen shown as below:
Browse Music: Goes back to Music folder.
Press
then press OK to start playing.
/
to select the desired photo, and
Optical Disc
USB1
4
5
:
Press REPEAT repeatedly to select the
desired repeat mode.
To play music files while viewing photos,
follow the following steps:
If no USB flash drive is inserted, the system will
only show optical disc.
• Press RETURN.
• Use /
press OK.
to select Browse Music, then
Press
/
to select a desired source and
then press to highlight an option, and then
press OK.
3
• Select the desired track and press OK to
start playing.
(For example: selecting the Pictures)
To stop playing and return to the main menu,
follow one of the steps described below:
Pictures
6
Optical Disc
30 item(s)
1
• Press STOP.
• Press RETURN.
• Press , then use
Menu and then press OK to confirm.
/
to highlight Main
Settings
Thumbnail
Main Menu
Start Slide Show
Browse Music
Now Playing
Tile N/A Chapter N/A
2
3
1
: defines the total number of files that a device
contains.
2
3
: shows the currently playing file number.
: shows all pictures in thumbnail mode.
19
Playback
Using a USB Flash Drive
Using Media Player Function
Operating Media Player Function
You can play MP3, WMA or JPEG files that have been
stored on USB flash drives on the Blu-ray Disc™ player.
Operating a USB Flash Drive
Set Media Player to “ON”.
1For detailed operations, please refer to the
“Media Player” section in “System Setting”
on page 24.
Inserting a USB flash drive into the USB
port on the back of Blu-ray Disc™ player
until it clicks.
1
In Home Menu, press
and then press
/
to select Media,
.
2
In Home Menu, press
and then press
/
to select Media,
.
If Media Player is set to “OFF”, Media Player
will not function.
2
If no optical disc is inserted, the system will only
show USB flash drive.
Press
press
OK.
/ to select a desired source, then
to highlight an option, and press
3
Press
press
OK.
/ to select a desired source, then
to highlight an option, and press
3
Notes:
•
Make sure your player is properly connected to the
network before using Media Player. Furthermore, you
need other Media Player servers in the network to see
and/or hear contents.
For detailed operations, please follow the instructions in
“Playing files on a data disc” on page 19 for details.
Removing the USB Flash Drive
•
Do not remove the LAN connector during playback.
In stop mode, gently pull the USB flash drive out
slowly.
Notes:
•
If you cannot easily insert the USB flash drive, you may
have inserted it incorrectly. Try to turnover the device
and then insert again.
•
Do not remove the USB flash drive during playback.
20
Customizing the Function Settings
You can change the default settings to customize
performance to your preference.
3. Follow the on-screen instructions to customize the
following settings to your preference:
•
•
•
OSD Language Settings
General Operations
(English/French/Spanish)
Resolution
1. Press
full stop mode, the Settings menu appears.
2. Press button, then use button to select the
setting options.
3. Press OK button.
/
to select Settings in home menu while in
(HDMI Auto/1080p/1080i/720p/480p/480i)
TV Aspect
/
(16:9 Wide/16:9 Pillabox/4:3 Pan and Scan/4:3
Letterbox)
4. Press or RETURN button to return to the previous
menu.
•
•
Optical Disc Auto Play
(Disable/Enable)
Screen Saver Duration
Info
(Off /5 Minutes/10 Minutes/ 20 Minutes/ 30
Minutes)
Quick Setup
4. After setting, press OK to confirm and exit the setup.
Note: If it is the first time for the player to start up or
users restore all settings to factory defaults, the system
will prompt you to perform Quick Setup. Repeat the steps
described as above to complete the setup.
BD-Live
Display
Audio
Using BD-Live™ Features
A
Language
Some (but not all) Blu-ray Disc™ discs contain additional
features that are made available to players that are
connected to the internet, and have additional memory
added. These additional features may include things like:
Parental
•
•
•
the ability to download new movie trailers
additional ‘commentary’ by actors and directors
multiperson game play and chat
submenu display area
Settings menu items
In order to access BD-Live™ functions, the player must
be properly configured for BD-Live internet access, and it
must be equipped with additional memory.
Info Menu
This menu displays the following information:
Note: BD-Live™ requires connection of a USB flash
drive of at least 1 GB (sold separately) to USB port. For
models without built-inWi-Fi®, BD-Live™ is only supported
via Ethernet so when using single USB port for internet
access, BD-Live™ will not be available. Performance
of interactive features may vary due to disc design or
content, and may also require an always-on broadband
internet connection. Firmware update may be required
for some interactive features. Some features may require
additional bandwidth. Internet services are available only
in the United States.
•
•
•
Software Version
Software Date
Netflix ESN
1. In the main menu of Settings, press button, then use
button to select Info to display the version information
on software and Netflix ESN.
/
2. Press or RETURN to go to the previous menu.
1. In the main menu of Settings, press button, then use
/
button to select BD-Live, then press OK.
/
Performing Quick-Setup
2. Press
3. Use
to select an option, and then press OK.
to select the desired setting, and then press
/
OK to confirm.
4. Press to go to the previous menu.
1. In the main menu of Settings, press button, then use
/ button to select Quick Setup, and then press OK
to confirm.
BD-Live Internet Access:
2. Press OK to perform Quick Setup.
To exit the setup menu:
•
•
•
Limit Access — Allows Internet access with valid BD-
Live™ network access approval.
Always Allow Access — Always allows BD-Live
Internet access.
Prohibit Access — Never allows BD-Live Internet
access.
•
Use button to highlight “No thanks. I’ll go through
the full setup menu later”, and then press OK.
•
Or press button directly.
21
Customizing the Function Settings
In order to set the player up for BD-Live Internet Access,
perform the following steps:
Resolution:
You can define the video output resolution in this option.
1. In the main menu of Settings, press button, then use
to select BD-Live, then press OK.
to select “BD-Live Internet Access”, and
TV Type
Resolution
/
2. Press
/
then press OK.
If your TV is a high-definition
TV(HDTV) connected to the HDMI
jack on your player and you want your
player to set the output resolution
based on information exchanged
between the TV and your player over
the HDMI cable.
3. Use
/
OK to confirm.
to select the desired setting, and then press
HDMI Auto
4. Make sure that “Limit Access” or “Always Allow
Access” is checked.
5. Once the USB flash drive has been inserted, if there
is not at least 100Mbyte of free space on the device,
you should choose “Erase Blu-ray Storage” from the
BD-Live setup menu.
If the TV is a high-definition TV
(HDTV) capable of 1080p (any frame
rate) connected to the HDMI jack on
your player
1080p
6. Press to return to the main menu of Settings, then
use
/
to highlight Network, and then press OK.(For
details, please refer to “Network Connection Setting”on
Page 25.)
If your TV is a high-definition TV
(HDTV) capable of 1080i only
1080i
720p
480p
480i
Notes:
•
•
•
Depending on your connection environment, it may take
time to connect to the Internet or the Internet may not
be connected.
When BD-Live™ function are used and the unit is
connected to the Internet, you may be charged for this
communication.
If your TV is a high-definition TV
(HDTV) capable of 720p only
If your TV is an enhanced-definition
TV (EDTV) capable of 480p only
Do not remove the USB flash drive when using the
BD-Live™ function.
If your TV is a standard-definition TV
(SDTV) capable of 480i only
BD-Live Storage:
Notes:
•
This option is used to tell the Blu-ray Disc™ player whether
or not to use an inserted USB flash drive to store BD-Live™
content (movie trailers, additional scenes, etc.).
Selecting a resolution the TV does not support could
result in an unstable picture or loss of the picture. See
the documentation that came with the TV to find the
resolutions the TV supports.
In order to add BD-Live™ memory for BD-Live Internet
Access, insert a USB flash drive (1GB is recommended)
into the USB port on the player.
•
Only the HDMI output on your player supports 1080p
video output at any frame rate.
Erase Blu-ray Storage:
TV Aspect:
If you choose OK to erase Blu-ray storage, all bookmarks
and BD-Live™ content saved in memory are deleted.
16:9 wide, 16:9 Pillarbox, 4:3 Pan and Scan and 4:3
Letter Box are available for your choice.
Film Mode:
Display Setting
Movies are recorded on film at a rate of 24 pictures (frames)
per second. Many of the movies on Blu-ray discs are
placed on the discs at this frame rate. If your TV supports
24 frames per second, but you would prefer viewing the
video at a higher frame rate, you should turn off Film Mode.
Off selects a 60 frames/second output format.
1. In the main menu of Settings, press button to select
Display, and then press OK to confirm.
2. Press
3. Use
/
to select an option, and then press OK.
to select the desired option, and then press
/
OK to confirm your selection.
4. Press to go to the previous menu.
Deep Color:
This option decides whether to turn off the Deep Color
(color depth) setting for video signals output from the
HDMI OUT jack.
HDMI Status:
This option displays the HDMI status. If an HDMI TV is
connected, Connected appears. If an HDMI TV is not
connected, Disconnected appears.
Connecting the player and a TV that supports Deep
Color allows more accurate color reproduction than when
connecting it to a TV that does not support Deep Color.
It is recommended to set this option Off if the picture is
unstable or colors appear unnatural.
HDMI Preferred Format:
This option shows the best HDMI format for the connected
TV. If HDMI is not pulled out, a composite image is not
output.
* HDMI connection is required.Cables are not included for
BDX2150KU model. Analog connection is not supported.
22
Customizing the Function Settings
This would be useful, for instance, when you want to watch
a movie in the evening when others might be sleeping.
Audio Setting
NOTE:This setup menu item has no effect unless you have
selected “Bitstream Mixed” in the Blu-ray Disc™ player’s
audio setup menu.
The settings in the Audio menu will configure the Blu-ray
Disc™ player’s digital audio outputs (HDMI or Coaxial).
1. In the main menu of Settings, press button, then use
/
When Dynamic Range Control is set to Off, movie
soundtracks are played with the standard dynamic range.
button to select Audio, then press OK button.
2. Press
3. Use
/
to select an option, and then press OK.
When movie soundtracks are played at low volume orfrom
smaller speakers, you can set Dynamic Range Control to
On.Your player applies appropriate compression to make
low-level content more intelligible and prevent dramatic
passages from getting too loud.
/
press OK to confirm your selection.
to select your preferred audio items, and then
4. Press to go to the previous menu.
PCM Downsampling:
Selecting the “Auto” option turns on the Dynamic Range
Control for all Blu-ray Disc™ movie soundtracks except
Dolby TrueHD. If you have selected a Dolby TrueHD track
on the Blu-ray Disc™ disc, the “auto” selection tells the
Blu-ray Disc™ player to only turn on dynamic range control
if information embedded in the Dolby TrueHD sound track
tells it to do so.
If you don’t have a surround sound receiver connected
to the Blu-ray Disc™ player, you should leave the PCM
downsampling to 48 kHz, and proceed to the next setup
menu item.
If you have a surround sound receiver connected tothe Blu-
ray Disc™ player, and you have connected to the surround
receiver via the Blu-ray Disc™ player’s HDMI output, this
setting has no effect on the audio going to the HDMI output
of the player.Leave the PCM downsampling to 48 kHz, and
proceed to the next setup menu item.
Stereo Downmix:
Select whether to downmix the multi-channel audio into
fewer channels.
•
Auto — Downmixes the multi-channel audio into
the specific stereo that the connected equipment
supports.
NOTE: Incorrectly setting the digital audio output’s PCM
sampling rate too high may result in unpredictable audio
playback.
•
Stereo (LoRo) — Downmixes the multi-channel audio
into two channel stereo. Choose when the Blu-ray
Disc™ player is connected to the equipment that does
not support virtual surround function such as Dolby
Pro Logic.
Digital Output:
•
PCM Stereo — Sets the output to PCM Stereo if you
have not an audio receiver connected to your Blu-ray
Disc™ player or the audio receiver connected to Blu-ray
disc player is not a 5.1/7.1 channel receiver.
•
Surround Encoded (LtRt) — Downmixes the multi-
channel audio into surround compatible stereo.Choose
when the Blu-ray Disc™ player is connected to the
equipment that supports virtual surround function such
as Dolby Pro Logic.
•
Bitstream HD — Lets your player send Dolby TrueHD
or DTS-HD MA bitstreams over HDMI (if your player is
connected to a compatible HDMI audio receiver).If your
player is not connected to a compatible HDMI receiver
(for example, your player is connected directly to the
TV, a compatible audio signal is automatically sent
over the HDMI connection. With this setting, Blu-ray
audio is limited to the soundtrack for the main movie
(no PIP audio).
Language Setting
1. In the main menu of Settings, press button, then use
/
•
•
Bitstream Legacy — Sends a DTS or Dolby Digital
bitstream from the disc over the HDMI connection.
Blu-ray audio is limited to the soundtrack for the main
movie (no PIP audio).
to select Language, and then press OK.
to select OSD, Menu, Audio or Subtitle, and
2. Press
/
then press OK.
3. Use
/ to select your preferred language, and then
press OK to confirm your selection.
Bitstream Mixed — Sends a Dolby Digital or DTS
bitstream over the HDMI or Coaxial connection. This
mode is primarily intended for use when you want to
hear both PIP audio and the movie audio.
4. Press to go to the previous menu.
OSD:
•
•
PCM 5.1 — Sends a PCM audio signal of up to 5.1
channels over the HDMI connection.
This option enables you to select the on-screen menu
language.
PCM 7.1 — Sends a PCM audio signal of up to 7.1
channels over the HDMI connection.
Menu:
This option lets you to select the disc menu language.
Dynamic Range Control:
Notes:
Dynamic Range Control means that you can allow the Blu-
ray Disc™ player to make the loud parts of a movie’s audio
track quieter than they would be in the theatre, without
making the dialog of the actors any quieter.
•
•
Not all languages are available on all discs.
Most discs only have one menu language.
23
Customizing the Function Settings
•
•
7 [NC-17] — Not suitable for anyone under 17.
Audio:
8 [Adult] — All Blu-ray discs and DVDs can be
played.
You can choose the audio language from this option to
your preference.
4. Press to go to the previous menu.
Notes:
•
•
Not all languages are available on all discs.
Setting the parental control password
Some discs do not let you select the audio language
using your player’s menu. Instead, you have to select
the audio language from the disc setup menu (the menu
that appears after you insert the disc).
1. In the main menu of Settings, press , then press
to select Parental, and then press OK.
/
2. Press
OK.
/
to select Parental Password, then press
Subtitle:
3. Enter a 4-digit number for the parental password, then
use to highlight Ok, and then press OK to confirm.
If you forget your password, reset your player to the
factory defaults. For more information, see “Restore
factory defaults” on page 25.
You can customize your preferred subtitle language in
this option.
Notes:
•
•
Not all languages are available on all discs.
4. Press to go to the previous menu.
Some discs do not let you select the subtitle language
using your player’s menu.Instead, you have to select the
subtitle language from the disc setup menu (the menu
that appears after you insert the disc).
System Setting
•
You can also select the subtitle language from the
subtitle menu in the on-screen menu.
1. In the main menu of Settings, press button, then use
/
button to select System, then press OK.
/
/
OK to confirm.
4. Press to go to the previous menu.
2. Press
3. Use
to select an option, and then press OK.
to select the desired setting, and then press
Parental Control
1. In the main menu of Settings, press , then press
to select Parental, and then press OK.
/
Optical Disc Auto Play:
2. Press
3. Use
/
to select an option, and then press OK.
to select the desired option, and then press
If Enable is selected, it will load data and play back
automatically when you insert a Blu-ray disc.WhenDisable
is selected and if you insert a Blu-ray disc, the disc you can
select will be displayed on the Settings menu.
/
OK to confirm your selection.
4. Press to go to the previous menu.
Note: If Parental Control was previously turned On, you
will be prompted to enter the parental control password
before being allowed to change these settings. (See
“Turning parental control on or off” for details.)
Media Player:
Media Player technology enables you to create an
interoperability network with other devices for resource
sharing based on a network.
Selecting the parental country
Screen Saver Duration:
Parental Country is fixed in USA.
This Blu-ray Disc™ player has a screen saver feature that
turns the screen black when your player is inactive.You can
set the interval time you want your player to wait before
activating the screen saver.
Turning parental control on or off
1. In the main menu of Settings, press , then press
to select Parental, and then press OK.
/
2. Press
OK.
3. Press
/
to select Parental Control, then press
Note: The unit shuts down automatically in about thirty
minutes if it remains idle and no activities are made.
/
to select On or Off, then press OK.
CEC Support:
4. Press to go to the previous menu.
This option is used to allow the TV remote control to
control certain functions of the Blu-ray Disc™ player; and
for the Blu-ray Disc™ player to control certain functions
of the TV.
Setting the parental control level
1. In the main menu of Settings, press , then press
to select Parental, and then press OK.
/
2. Press
3. Press
/
/
to select Parental Level, then press OK.
to select the rating level you want to block,
On: Allow mutual control of devices through HDMI.
Off: Do not allow CEC control.
then press OK. The rating and all higher ratings will be
blocked.You can select:
Notes:
•
Not all TVs are compatible with your Blu-ray Disc™
player.
•
•
•
•
•
•
1 [Kid Safe] — Suitable for all children.
2 [G] — General audiences.
•
The default setting is Off. Select On if CEC control is
necessary.
3 [PG] — Parental guidance suggested.
4 [PG-13] — Not suitable for anyone under 13.
5 [PG-R] — Parental guidance recommended.
Update Via Network:
This option displays the required storage space if the Blu-
ray Disc™ player is connected to internet for upgrade.
6 [R] — Not suitable for anyone under 17 unless
supervised by a parent or adult guardian.
24
Customizing the Function Settings
For detailed upgrade operation, please refer to “UpgradingYour Player’s Firmware” on this page.
Restore factory defaults:
Choose one of the options, then press OK to pop up a dialog box, choose Ok in the box, and then press OK to
confirm.
To apply the deactivation, please plug off the player after operating deactivation.
Actions
Response
Restore factory settings and deactivate All settings (including Parental Password) will be restored to the factory
all connected applications
Restore factory settings
defaults and all connected applications will be deactivated.
Restores all settings (including Parental Password) to the factory defaults.
Deactivate all connected applications Deactivates all connected applications
Deactivate Netflix
Deactivates the connected Netflix application
Deactivates the connected YouTube application
Deactivates the connected VUDU application
Deactivates the connected Pandora application
Deactivates the connected Picasa application
Deactivates the connected Blockbuster application
Deactivates the connected CinemaNow application
DeactivateYouTube
Deactivate VUDU
Deactivate Pandora
Deactivate Picasa
Deactivate Blockbuster
Deactivate CinemaNow
Network Connection Setting
Note: The option Wireless appears only while a wireless LAN adapter
is inserted into the USB port.
IP Settings
Link Status
Link Down
00:23:18:75:b1:2b
Dynamic
0.0.0.0
Configuring a wired Internet connection
MAC Address
IP Mode
1. Press
to select IP Mode, then press OK.
2. Press to select an IP mode.You can select:
/
to select Network in stop mode, then press OK. Press
/
IP Address
Subnet Mask
Gateway
/
0.0.0.0
•
Manual — Lets you manually configure network settings, such as
IP address, subnet mask, and gateway settings.
Dynamic — Uses DHCP to automatically obtain an IP address.
0.0.0.0
Primary DNS
Secondary DNS
0.0.0.0
•
3. Press or RETURN to go to the previous menu.
0.0.0.0
Apply
Cancel
Network Test
UpgradingYour Player’s Firmware
This player needs to stay up to date to make sure that you have the latest features available.This is done with a software
update.You may periodically see a screen that prompts you to update your firmware. It is highly recommended that you
apply all updates available to enhance and enjoy product features.
Automatic updates over the Internet
1. Make sure that your player is successfully connected to the Internet.If new firmware is available, you will see a message
prompting you to update your firmware. Follow the directions in the update program to complete the firmware update
procedure for the player.
2. Use
/
on the TV screen.
to highlight “OK”, and then press OK. The software will begin downloading, and a status bar will appear
3. After the firmware update has completed successfully, a message will appear indicating the player will automatically
turn itself off and restart.
Note: Never turn off the player during a firmware update process. Let the firmware update process finish.
Toshiba America Information Systems, Inc. will not be responsible for damage or malfunction caused to the player by
an unstable internet connection or consumer negligence during firmware updates.
25
Using the Connected Applications
Some models are equipped with the capability to watch movies over the internet.
Watching Movies with BLOCKBUSTER®
Watching Movies with CinemaNow®
This Blu-ray Disc™ Player enables you to use the following
services provided by Blockbuster.
This Blu-ray Disc™ Player enables you to use the following
services provided by CinemaNow.
1. In Home Menu, press
2. Press , then press
then press OK to enter Blockbuster main menu.
/
to select Connected.
1. In Home Menu, press
2. Press , then press
and then press OK to enter CinemaNow main menu.
/
to select Connected.
/
to highlight Blockbuster, and
/
to highlight CinemaNow,
•
•
•
Movies : Display movies.
•
•
•
Movies : Display movies.
TV Shows : Display TV Shows.
TV Shows : Display TV Shows.
Find : Search for a desired movie or TV show by
entering it manually.
Search All : Search for a desired movie or TV show
by entering it manually.
•
•
•
•
My Library : Display a title that you bought or
rented.
•
•
•
•
My Videos : Display a title that you bought or
rented.
My Favorites : Display a title that has been added
to My Favorites.
Wish List : Display a title that has been added to
Wish List.
Configure : Activate or deactivate the Blu-ray
Disc™ Player.
Settings : Activate or deactivate the Blu-ray Disc™
Player.
Help : Get customer service contact information and
check the current software version.
Help : Get customer service contact information and
check the current software version.
3. If you don’t have a Blockbuster account yet, visit
www.blockbuster.com to create your account.
3. If you don’t have a CinemaNow account yet, visit www.
cinemanow.com/bbactivate to create your account.
4. Use
OK.
/
/
/
to select the Configure, then press
4. Use
OK.
/
/
/
to select the Settings, then press
5. Use the number buttons on the remote control to enter
the activation code that is created by the web site, then
use to highlight Activate, and press OK to confirm.
5. Press the Activate.
6. Use the number buttons on the remote control to enter
the activation code that is created by the web site, then
use to highlight Activate, and press OK to confirm.
When the Blu-ray Disc™ Player is activated, you will
move to the Home page.
When the Blu-ray Disc™ Player is activated, you will
move to the Home page.
6. Press
press OK.
7. Press
/
to select the Movies or TV Shows, then
7. Press
press OK.
8. Press
/
to select the Movies or TV Shows, then
/
/
/
to select the desired title, then press
OK.
/
/
/
to select the desired title, then press
8. Press
OK.
/
to select the Rent or Buy, then press
OK.
9. Press
OK.
/
/
to select the Rent or Buy, then press
9. Press
/
OK.If you want to play any of the titles that your bought,
to select the Submit Order, then press
10.Press
to select the Submit Order, then press
simply click Play Now.
OK.If you want to play any of the titles that your bought,
simply click Play Now.
10.Press to go to the previous menu.
11.Press to go to the previous menu.
26
Using the Connected Applications
appear on the TV screen. Select your desired one using
the remote control of the player. You can control Netflix
streaming video with the following keys of the remote
control of this player:
Watching Movies with Netflix®
To use Netflix service, connect this player to your
network, and make the network settings if they are not
finished yet.
To start playing movie.
To pause playback while in PLAY mode.
1. Launching Netflix movie
In Home Menu, press
use , and then press
then press OK to enter.
/
to select Connected, then
to highlight “Netflix”, and
To stop playing and return to a list of
movie titles.
/
To pause playing movie.
To start playing while in PAUSE mode.
2. Creating Netflix account
If you are not a Netflix Member:
To pause playing and open a list of scenes.
Pressing further proceeds to the next
scene.
Select “no”. Read the instructions displayed on the TV
PC. Sign up to create your account, then select “I’m now
a member”.
To pause playing and open a list of scenes.
Pressing further proceeds to the previous
scene.
To stop playing and return to a list of movie
titles.
To pause playing and open a list of scenes.
Fast forward play starts.
To pause playing and open a list of scenes.
Fast reverse play starts.
HOME To stop playing and return to Home Menu.
MENU
If you are a Netflix Member:
Select “Yes”.
OK
To pause playing of Trick play screen while
in PLAY mode.
To start playing the movie in case of during
Trick play screen.
3. Activating Netflix player
To play streaming video via Netflix service, Netflix player
needs to be activated. Read the instructions displayed on
your PC.Sign in to your Netflix account, if necessary.Enter
Note: Resolution of video streamed from Netflix varies
depending on communication speed or bitrate of each
content, etc.
the activation code displayed on the TV screen.
Watching Movies withYouTube®
1. In Home Menu, press
2. Press , then press
then press OK to confirm.
/
to select Connected.
to highlight YouTube, and
/
3. Please enjoy any contents.
4. Preparing Instant Queue
To play streaming video via Netflix service, Netflix player
needs to be activated. Read the instructions displayed on
your PC.Sign in to your Netflix account, if necessary.Enter
the activation code displayed on the TV screen.
Now you can view Netflix streaming video.
After having activated Netflix player and prepared Instant
Queue, movies and TV episodes in your Instant Queue
27
Using the Connected Applications
Listening to Music with Pandora®
Browsing Photos with Picasa®
Signing in with your account
Using an existing Pandora account
1. In Home Menu, press
2. Press , then press
then press OK to confirm.
/
to select Connected.
To display photos in your web album on the screen, you
need to sign in with your Picasa account.
/
to highlight Pandora, and
1. In Home Menu, press
/
to select Connected.
3. Select “I have a Pandora account” from the option
list.
2. Press , then press
press OK to confirm.
/
to highlight Picasa, and then
4. Sign in with your test account.
3. Enter your user name using the virtual keyboard, and
press OK while [OK] is selected.
Creating a new account on the Blu-ray Disc™
player
4. Enter the password using the virtual keyboard, and
press OK while [OK] is selected.
1. In Home Menu, press
2. Press , then press
then press OK to confirm.
/
to select Connected.
Your web album is displayed on the screen.
/
to highlight Pandora, and
Creating a new Picasa account on your PC
3. Select “I am new to Pandora” from the option list.
account.
4. You will be given an activation code. Use this activation
code to generate a new account and link it to the Blu-ray
Disc™ player using a PC.
Creating a new Pandora account on your PC
account.
Watching Movies with VUDU™
Creating a Vudu account on your player
1. In Home Menu, press
/
to select Connected.
2. Press , then press
press OK to confirm.
/
to highlight Vudu, and then
3. Follow the instructions to create an account, it will ask
for an email address.
4. Enter YOUR email addre ss using the keyboard that
appears on the screen. VUDU will then display a
message on the TV “Sending you an email”.
Creating a Vudu account on your PC
1. VUDU will send you an email with a hyper-link; click on
the link.
2. In the Vudu page that comes up on your PC’s browser
after clicking the link, enter the e-mail and password of
the owner of the account.
3. VUDU will then display a message “Enabling your
device to view movies.The email message on your
TV screen will disappear when done”.
4. On yourTV, you can now navigate to aVudu movie, and
‘buy’ or ‘rent’ it.
28
Troubleshooting & Maintenance
Troubleshooting
If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following
checklist.
Problem
Solution
No power
- Check if the AC cord is properly connected.
- Unplug the AC cord once, and wait for 5-10 seconds and then plug it in
again.
No sound or picture
- Check if the connected TV is turned on.
- Check if the connections are made securely and correctly.
- Check whether the connected TV or other device supports HDCP. (This unit
will not output a video signal unless the other device supports HDCP.)
- Check whether the output format of this unit (HDMI FORMAT) matches the
supported input format of other connected device.
Distorted picture
- Sometimes a small amount of picture distortion may appear. This is not a
malfunction.
- Connect this unit directly to the TV.
Completely distorted picture or
black / white picture with Blu-
ray Disc™ / DVD
- Make sure the disc is compatible with this unit.
No sound or distorted sound
- Adjust the volume.
- Check if speakers are connected correctly.
- Check the HDMI connections.
- Check the settings in “Audio” menu.
Picture freezes momentarily
during playback
- Check the disc for fingerprints / scratches and clean with a soft cloth wiping
from center to edge.
- Clean the disc.
Disc cannot be played back
- Clean the disc.
- Ensure the disc label is facing up.
- Check if the disc is defective by trying another disc.
- Cancel the ratings control or change the control level.
- Insert a correct disc that can be played back on this unit.
No return to start-up screen
when disc is removed
- Reset this unit by turning it off, then on again.
The unit does not respond to
the remote control
- Aim the remote control directly at infrared sensor window on the front panel.
- Reduce the distance to infrared sensor window.
- Replace the batteries in the remote control.
- Re-insert the batteries with their polarities (+ / - signs) as indicated.
Buttons do not work or the unit
stops responding
- To completely reset the unit, unplug the AC cord from the AC outlet for 5-10
seconds.
The unit does not respond to
some operating commands
during playback
- Operations may not be permitted by the disc.
Refer to the instructions of the disc.
29
Troubleshooting & Maintenance
Problem
Solution
The unit cannot read Blu-ray
Disc™ / DVD/ CD
- Dew condensation may form inside the unit. Do not use this unit for at least a
few hours until its inside gets dry.
- Wipe the dirt off the disc or replace the disc.
Angle does not switch
- The angle cannot be switched for Blu-ray Disc™ / DVD which do not contain
multiple angles.
In some cases multiple angles are only recorded for specific scenes.
Playback does not start when
the title is selected
- Check the settings in “Parental” menu.
The password for rating level has - If you forget your password, reset your player to the factory defaults and your
been forgotten
forgotten password will be cleared. For more information, see “Restore fac-
tory defaults” on page 25.
Cannot connect to the network
- Check if the LAN cable connection is properly made.
- Turn on the modem or broadband router.
- Check if the broadband router and/or modem is correctly connected.
- Check the “Network Connection Setting”.
Cannot connect to the network
while my PC is connected to the
network
- Check the content of your Internet service contract to see if your Internet
service provider prevents multiple terminals connecting at the same time.
Cannot use the BD-Live™
function
- Use a USB flash drive with enough space.
Notes:
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual
for details on correct operations.
Some functions are prohibited on some discs.
•
Maintenance
Servicing
•
•
Please refer to relevant topics on “Troubleshooting & Maintenance” before returning the product.
If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call our helpline to locate an Authorized Service Center.
Cleaning the cabinet
•
Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such
chemicals may discolor the surface or damage the unit.
Cleaning discs
•
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a
circular motion.
•
Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents
or antistatic spray intended for analog records.
Cleaning the disc lens
•
If this unit still does not perform properly although you refer to the relevant sections and to “Troubleshooting” in this
manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection
and cleaning of the laser optical pickup unit.
Disc handling
•
•
•
Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
Always store the disc in its protective case when it is not used.
Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit.
Do not attempt to playback such discs, as they may damage the unit.
IR signal check
•
If the remote control is not working properly, you can use a digital camera (including a cellular phone with built-in
camera) to see if it is sending out an infrared signal.
30
Glossary
Analog Audio
Dolby® Digital Plus
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound.
Dolby Digital Plus is the next generation digital audio
compression technology developed as an extension to
Dolby Digital. Blu-ray Disc supports 7.1 multi-channel
surround sound output.
Aspect Ratio
Dolby® TrueHD
The width of a TV screen relative to its height.
Dolby TrueHD is a lossless coding technology developed
for next generation optical discs. Blu-ray Disc supports
7.1 multi-channel surround sound output.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
DTS®
AVCHD
DTS is
a
multi-channel surround sound system. By
AVCHD is
a
new format for high definition video
connecting to DTS decoder, you can enjoy movie dynamic
and realistic sound like movie theater. DTS surround
sound technologies were developed by DTS, Inc.
camcorders which can record and play high-resolution
HD images.
BD-Java
DTS-HD®
With some Blu-ray Disc™ which support Java
applications, you can enjoy the interactive functions such
as games or interactive menus.
DTS-HD is a lossless coding technology developed as an
extension of the original DTS Coherent Acoustics format.
Blu-ray Disc supports 7.1 multi-channel surround sound
output.
BD-Live™
BD-Live™ is a BD-video (BD-ROM version 2 Profile 2.0/
Profile 1.1) which contains new functions (e.g. Internet
connection), in addition to the BONUSVIEW function.
Gateway
IP Address of the electronic devices (such as router)
which provide Internet access.
Blu-ray Disc™ (BD)
HDMI (High-Definition Multimedia Interface)
Blu-ray Disc™ is a next generation optical video disc which
is capable of storing much more data than a conventional
DVD is. The large capacity makes it possible to benefit
from the features such as high-definition videos, multi-
channel surround sounds, interactive menus and so on.
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
one cable connection.
Hub
Chapter
A
network.
device used for connecting multiple device to the
Just as a book is split up into several chapters, a title on a
BD-video or DVD-video is usually divided into chapters.
IP Address
Component Video Output
A set of numbers which are assigned to devices
participating in a computer network.
Each signal of luminance (Y) and component (PB/CB, PR/
CR) is independent to output so that you can experience
picture Color as it is. Also, due to compatibility with
progressive video (525p/480p), you can experience
higher-density picture than that in interlace (525i/480i).
JPEG (Joint Photographic Experts Group)
JPEG is a method of compressing still picture files. You
can copy JPEG files on BD-RE/-R, DVD-RW/-R or CD-
RW/-R from a computer and play back the files in this
unit.
Digital Audio
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-to-
digital converter, generating a stream of numbers. On
LAN (Local Area Network)
A group of computer networks covering a small area like
a company, school or home.
playback,
analog signal based on these numbers.
a
digital-to-analog converter generates an
Local Storage
A storage area of sub contents for playing virtual
packages on BD-video.
DNS Server
A server which translates Internet domain names into IP
addresses.
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files.You can copy MP3
files on BD-RE/-R, DVD-RW/-R or CD-RW/-R from the
computer and play back the files on this unit.
Dolby® Digital
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo (2ch) or
multi-channel audio.
31
Glossary
PCM (Pulse Code Modulation)
Subnet Mask
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality that requires a
lot of data compared to formats such as Dolby Digital and
MPEG audio.For compatibility with digital audio recorders
(CD, MD and DAT) and AV amplifiers with digital inputs,
this unit can convert Dolby Digital, DTS, and MPEG audio
to PCM.
A mask which is used to determine what subnet an IP
address belongs to.
Title
A collection of chapters on BD-video or DVD-video.
Track
Audio CD use tracks to divide up the content of a disc.
a
Proxy Server
The BD-video or DVD-video equivalent is called
chapter. See also “Chapter”.
Proxy server is a server which acts as an intermediary
between a workstation user and the Internet to ensure
security.
Virtual Package
The function which copies data to other media (local
storage) from the Internet and play the secondary video,
secondary audio and the subtitle at the same time. The
method of the playback varies depending on discs.
Region Code
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes.You can find the region code of
your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Windows Media™ Audio
Windows Media™ Audio is the audio compressing
technology developed by Microsoft. You can copy
Windows Media™ Audio files on BD-RE/-R, DVD-RW/-R
or CD-RW/-R from a computer and play them back on
this unit.
Router
A networking device which distinguishes the IP address
assigned to each device and routing and forwarding
information in the computer network.
x.v.Color
Sampling Frequency
“x.v.Color” is a promotion name given to the products that
have the capability to realize a wide color space based
on the xvYCC specifications and is a trademark of Sony
Corporation.
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
Specifications
General
Signal system
NTSC color
Power requirements
Power consumption
Dimensions (width x height x depth)
Weight
120 V AC, 60 Hz
15 W
360 × 36 × 192.7 mm
1.02 kg
Operating temperature
Operating humidity
41°F (5°C) to 95°F (35°C)
Less than 80 % (no condensation)
Terminals
HDMI output
HDMI jack x 1
Video: 480i, 480p, 720p, 1080i, 1080p, 1080p/24F / Audio
Audio output (Coaxial digital)
RCA jack x 1
0.5 Vp-p (75 Ω)
USB terminal x 1
LAN terminal
5V
500mA
100BASE-T
Note:
• The specifications and design of this product are subject to change without notice.
32
Limited Warranty
Limited United States Warranty for Digital Audio Video (“DAV”) Product
Toshiba America Information Systems, Inc. (“TAIS”) makes the following limited warranties to original consumers in the
United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY
PERSON RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO
NO OTHER PURCHASER ORTRANSFEREE. DAV PRODUCTS PURCHASED INTHE U.S.A.OR PUERTO RICO AND
USED ANYWHERE OUTSIDE OFTHE U.S.A.OR PUERTO RICO, INCLUDING, WITHOUT LIMITATION, CANADA AND
MEXICO, ARE NOT COVERED BY THESE WARRANTIES. DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE
OFTHE U.S.A. OR PUERTO RICO, INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED INTHE
U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Limited 90-Day Warranty on Parts and Labor
TAIS WARRANTS THIS PRODUCT AND ITS PARTS AGAINST DEFECTS IN MATERIALS OR WORKMANSHIP
FOR A PERIOD OF 90-DAYS FROM THE DATE OF ORIGINAL RETAIL PURCHASE. DURING THIS PERIOD,TAIS
WILL, AT TAIS’ SOLE DISCRETION, REPAIR OR REPLACE A DEFECTIVE PART/PRODUCT WITH A NEW OR
REFURBISHED PART/PRODUCTWITHOUT CHARGETOYOU FOR PARTS OR LABOR. ANY PART OR PRODUCT
REPLACED UNDERTHIS LIMITEDWARRANTY BECOMESTHE PROPERTY OFTAIS. IN SOME CASES,YOU MAY
BE RESPONSIBLE FOR DELIVERING THE PRODUCT TO A SERVICE CENTER.
Rental Units – The limited warranty period begins on the date of the first rental or thirty (30) days after the date of
shipment to the rental firm, whichever comes first.
Your Responsibility – Read the owner’s manual thoroughly before installing or operating this Product. Complete and
Registration of your Product will enable TAIS to contact you in the unlikely event a safety notification is required under
the U.S. Consumer Product Safety Act. Failure to complete and return the product registration card does not diminish
your warranty rights.
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS:
(1) This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. (2) A
purchase receipt or other proof of the original purchase date is required for warranty service. (3) All warranty servicing
of this Product must be performed by an Authorized TAIS Service Provider. (4) The warranties from TAIS are effective
only if this Product is purchased and operated in the U.S.A. or Puerto Rico. (5) Removal and reinstallation of product
that is mounted in such a manner as to impede normal service is not covered under these warranties. This includes
wall mounts, custom cabinets and other installation methods that do not provide for direct and immediate access to the
product for service purposes. Labor service charges for set installation, setup, adjustment of customer controls, and
installation or repair of antenna, satellite or cable systems are not covered by this limited warranty. (6) Reception or
other problems caused by inadequate antenna systems, misaligned satellite dishes, improperly installed cable drops or
use with non-standard signals or sources are your responsibility and are not covered by this limited warranty. (7) This
limited warranty is void if the product is used outside the range of the temperature (heat/cold) and/or moisture operating
conditions as outlined in the product’s specification listed in the Owner’s manual, or if the product is exposed to excessive
smoke, dust, or other airborne contaminants or environmental conditions. (8) Warranties extend only to defects in
materials or workmanship as limited above, and do not extend to any Product or parts that have been lost or discarded
by you or to damage to the Product or parts caused by fires, misuse, abuse, accident, Acts of God (such as lightning or
fluctuations in electric power), improper installation, improper maintenance, or use in violation of instructions furnished
by TAIS; use or malfunction through simultaneous use of this Product and connected equipment; or to units that have
been modified or had the serial number removed, altered, defaced, or rendered illegible. (9) Product purchased “AS-IS”
or “With known faults, defects or problems” are not covered by this limited warranty. (10) Product previously owned or
registered by a consumer and resold is not covered by this limited warranty. (11) Product that is refurbished and resold
is not covered under this limited warranty.
How to Obtain Warranty Services
After following all of the operating instructions in the Owner’s manual, review the section entitled “Concierge” located on
our Customer Support Web site at www.support.toshiba.com. If you find that service is needed, follow the instructions
provided on the web site or please contactTAIS’Consumer Solution Center toll free at 1-800-631-3811. You must present
upon request your original bill of sale or other proof of purchase including the serial number for in warranty service.
ALLWARRANTIES IMPLIED BYTHE LAW OF ANY STATE OFTHE U.S.A., INCLUDINGTHE IMPLIEDWARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE
DURATION OFTHE LIMITED WARRANTIES SET FORTH ABOVE.WITHTHE EXCEPTION OF ANY WARRANTIES
IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE FOREGOING LIMITED
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND
SIMILAR OBLIGATIONS OF TAIS WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO
EVENT SHALL TAIS BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, LOST PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE OF RECORDED
33
Limited Warranty
DATA CAUSED BY USE, MISUSE OR INABILITY TO
USE THIS PRODUCT).
agreement between you and Toshiba Corporation
(“Toshiba”) with regard to the copyrighted Software
provided with this EULA. Use of any software and related
documentation (“Software”) provided with a Toshiba Blu-
ray Disc™ Player, or made available by downloading or
otherwise to you by Toshiba in whatever form or media,
will constitute your acceptance of these terms, unless
separate terms are provided by the software supplier or
Toshiba in the documentation accompanying the Toshiba
Blu-ray Disc™ Player or otherwise, in which case certain
additional or different terms may apply. If you do not agree
with the terms of this EULA, do not use, download, install
or copy the Software. If you wish to return a complete
Blu-ray Disc™ Player system (hardware and software),
contact the retailer where you purchased the Blu-ray
Disc™ Player, and comply with the retailer’s standard
return policies and procedures.
No person, agent, distributor, dealer or company is
authorized to change, modify or extend the terms of
these warranties in any manner whatsoever. The time
within which an action must be commenced to enforce
any obligation of TAIS arising under this limited warranty
or under any statute, or law of the United States or any
state thereof, is hereby limited to ninety (90) days from the
date you discover or should have discovered, the defect.
This limitation does not apply to implied warranties arising
under the law of any state of the U.S.A.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH MAY VARY FROM STATE TO STATE
IN THE U.S.A. SOME STATES OF THE U.S.A. DO
NOT ALLOW LIMITATIONS ON THE DURATION OF
AN IMPLIED WARRANTY, WHEN AN ACTION MAY
BE BROUGHT, OR THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.
THEREFORE, THE ABOVE PROVISIONS MAY NOT
APPLY TOYOU UNDER SUCH CIRCUMSTANCES.
Article 1 Definition
The Software means all programs contained in the
Toshiba Blu-ray Disc™ Player. The copyright of the
Software belongs to Toshiba and/or its suppliers,
including BSQUARE Corporation and/or its suppliers.
The Software is protected by copyright laws, Universal
Copyright Convention, and other laws and conventions
related to intellectual property rights. The content of the
Software and manual is subject to change by Toshiba
without notice.
Disclaimer
BDX2150 requires a wireless adapter - sold separately.
1080p capable display required for viewing in 1080p.
Viewing HD content and up-converting DVD content may
require an HDCP capable input on your display device.
While up-converting DVD video content may result in a
picture that appears to be near HD quality, results may
vary depending on content, display and settings. Feature
performance may vary and may also require an always-
on broadband internet connection. Firmware update and
additional bandwidth may be required.BD-Live™ requires
connection of a USB flash drive of at least 1 GB (sold
separately) to USB port. BD-Live™ is only supported
via Ethernet so when using single USB port for internet
access, BD-Live™ will not be available. Performance
of interactive features may vary due to disc design or
content, and may also require an always-on broadband
internet connection. Firmware update may be required
for some interactive features. Some features may require
additional bandwidth. Internet services are available only
in the United States. Third party internet services are not
provided by Toshiba, may change or be discontinued at
any time and may be subject to third party restrictions.
Toshiba makes no representations or warranties about
these services, which may require the creation of a user
account through a computer with internet access. Third
party internet service users may incur one-time and/
or recurring charges. For Dolby® TrueHD and DTS-HD
Master Audio | Essential™ playback, content encoded in
Dolby® TrueHD and DTS-HD Master Audio | Essential™
format required. Viewing 1080p/24 fps output requires
1080p/24 fps encoded content and an HD display capable
of accepting a 1080p/24Hz signal. Supported file types:
JPEG, MP3, WMA, and AVCHD. Some recordable media,
cards or files may not be supported.Product specifications,
information and availability are all subject to change
without notice.
Article 2 License Grant and Use Conditions
Toshiba grants to you a personal, non-transferable and
non-exclusive right to use the copy of the Software in
accordance with this EULA.You may permanently transfer
all of your rights under this EULA, provided you transfer
complete Blu-ray Disc™ Player together with all of the
Software, you retain no copies, and the recipient agrees
to the terms of this EULA. If the Software is an upgrade
version, any transfer must include all prior versions of the
Software. For maintenance purposes, you may update
the version of the Software only for the Blu-ray Disc™
Player that is owned by you.
Article 3 Prohibited Uses
Unless otherwise expressly provided in this EULA or
the product manual accompanying the Toshiba Blu-ray
Disc™ Player:
3.1. You may not copy the Software, in whole or in part,
without express written permission by Toshiba and/or
its suppliers.
3.2. You may not assign, resell, distribute or sublicense
the Software or a copy of the Software.
3.3. You may not create, assign, resell, or sublicense
secondary works of the Software without permission.
3.4. You may not modify, analyze, reverse engineer,
decompile or disassemble any part of the Software.
3.5. You may not combine or incorporate the Software
with or into any other application.
3.6. You may not print the Software.
Article 4 Disclaimer
4.1. THE HARDWARE PRODUCT LIMITED WARRANTY
IS SET FORTH IN THE DOCUMENTATION
ACCOMPANYING THE HARDWARE PRODUCT.
END USER LICENSE AGREEMENT
4.2. THE SOFTWARE IS PROVIDED “AS-IS” AND “AS-
AVAILABLE,”WITHOUTWARRANTIESOFANYKIND.
This End User License Agreement (“EULA”) is a legal
34
ALL WARRANTIES AND CONDITIONS, EXPRESS
OR IMPLIED, CONTRACTUAL OR STATUTORY,
INCLUDING BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, TITLE
OR NON-INFRINGEMENT ARE HEREBY WAIVED
BY YOU AND DISCLAIMED BY TOSHIBA.THIS
EULA REPRESENTS THE SOLE AND EXCLUSIVE
OBLIGATION OF TOSHIBA AND ITS SUPPLIERS
WITH RESPECT TO THE SOFTWARE.
Copyright© 1995-200[7] Adobe Systems Incorporated.
All rights reserved. Macromedia, Flash, Macromedia
Flash, [and Macromedia Flash Lite] are trademarks or
registered trademarks of Adobe Systems Incorporated in
the United States and other countries.
License information on the software used in the
TOSHIBA Blu-ray Disc™ player
This document is statement purpose only. Not concerned
with operation of this product.
The software pre-installed in the TOSHIBA Blu-ray
Disc™ player consists of multiple, independent software
components. Each software component is copyrighted by
TOSHIBA or a third party.
Article 5 Limitation of Liability
TO THE MAXIMUM EXTENT NOT PROHIBITED BY
APPLICABLE LAW, IN NO EVENT SHALL TOSHIBA
AND/OR ITS SUPPLIERS BE LIABLE FOR PERSONAL
INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT,
The TOSHIBA Blu-ray Disc™ player uses software
components that are distributed as freeware under a
third-party end-user license agreement or copyright
notice (hereinafter referred to as a “EULA”).
PUNITIVE
OR
CONSEQUENTIAL
DAMAGES
WHATSOEVER, INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR ANY OTHER
COMMERNCIAL DAMAGES OR LOSSES, ARISING
OUT OF OR RELATED TO YOUR USE OR INABILITY
TO USE THE SOFTWARE, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY
(CONTRACT, TORT, OR OTHERWISE) AND EVEN
IF TOSHIBA AND/OR ITS SUPPLIERS HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SOME JURISDICTIONS DO NOT ALLOW THE
LIMITATIONOFLIABILITYFORPERSONALINJURY, OR
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES;
THEREFORE, THE ABOVE LIMITATIONS MAY NOT
APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
THE AGGREGATE LIABILITY OF TOSHIBA AND ITS
SUPPLIERS IN CONNECTION WITH THE SOFTWARE,
REGARDLESS OFTHE FORM OF ANY LEGAL ACTION
OR PROCEEDING, SHALL BE LIMITED TO DIRECT
DAMAGES NOT TO EXCEED THE AMOUNT PAID FOR
THE TOSHIBA BLU-RAY PLAYER.
Some EULAs require that the source code of the
applicable component be disclosed as the condition for
distributing the software component in executable format.
You can check the software components subject to such
EULA requirements on the following phone number:
Phone number: 1-800-631-3811
TOSHIBA provides a warranty for the TOSHIBA Blu-ray
Disc™ player you have purchased under conditions set
forth by TOSHIBA.
However, some of the software components distributed
under an EULA are made available for use by the user
on the assumption that they are not copyrighted or
warranted by TOSHIBA or any third party.These software
components are licensed to the user free of charge and
therefore not covered by any warranty within the scope of
the applicable laws. These software components are not
subject to any copyrights or other third-party rights and are
provided in “as is” condition without any warranty, whether
express or implied. “Warranty” here includes, but not
limited to, an implied warranty for marketability or fitness
for specific uses. All risks associated with the quality or
performance of these software components are assumed
by the user. TOSHIBA shall not be liable whatsoever
for any cost of repair or correction or other incidental
expense incurred in connection with a defect found in any
of these software components. Unless specified under
the applicable laws or in a written agreement, a party who
changes or redistributes the software with consent from
the copyright holders or based on the aforementioned
licenses shall not be held liable whatsoever for any loss
arising from the use of or inability to use such software
components. The same applies even when the copyright
holders or relevant third parties have been informed of
the possibility of such loss. “Loss” here includes normal,
special, incidental and indirect loss (including, but not
limited to, the loss of data or its accuracy; loss incurred by
the user or any third party; and interface incompatibility
with other software). Please read each EULA for details
on the use conditions and items that must be observed
regarding these software components.
Article 6 Export Control
Any export, directly or indirectly, of the Software in
contravention of the United States Export Administration
Regulations, or any other applicable law, regulation, or
order, is prohibited.
Article 7 Termination of License
In the event that you fail to comply with any of the terms
and conditions contained herein, Toshiba shall have the
right to immediately terminate this Agreement without any
notification to you. Upon termination of this Agreement,
you shall cease all use of the Software and destroy all
copies, in whole and/or in part.
Article 8 Governing Law
This EULA is governed by the laws of Japan, without
references to the conflict of laws principles. Any and all
disputes arising hereunder shall be resolved exclusively
by the Tokyo District Court, Japan, and you hereby
consent to the exclusive jurisdiction of such court.
Article 9 Severability
If any provision of this EULA shall be held to be invalid,
illegal or unenforceable, the validity, legality and
enforceability of the remaining provisions hereof shall not
in any way be affected or impaired.
The table below lists the software components pre-
installed in the TOSHIBA Blu-ray Disc™ player, which are
subject to EULAs. The user should read the applicable
EULAs carefully before using these software components.
The EULAs are exhibited in their original text (English)
as exactly written by the respective parties other than
TOSHIBA.
(C) 2001-2010 Toshiba Corporation
The Software contains Macromedia® [Flash®] [Flash
Lite™] technology of Adobe Systems Incorporated.
35
Open-Source Software Included in the Blu-ray
Disc™ Player:
Open-Source Software Included in the Kernel/Rootfs:
(*= source must be distributed on request)
A copy of the GPL license is provided in Appendix K
A copy of the LGPL license is provided in Appendix L
Software
License (*= source must be distributed
on request)
Utility
Base Version
License
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
GPL 2.0
zlib license
A copy of the GPL2.0 license is provided in Appendix K
A copy of the LGPL2.1 license is provided in Appendix L
*kernel
*arp
net-tools-1.52
GNU Bash-3.2
cramfs
*backtrace
GPL2
*bash
*directfb-extra GPL2
*cramfsck
*dhcpcd
*e2fsprogs
*fdisk
*cairo
LGPL2
GPL2
dhcpcd-1.3
e2fsprogs-1.41.5
fdisk-2.10m
TinyLogin-0.80
sysutils
*directfb
*iconv
LGPL2
openssl
BSD-old dual license.
The terms and conditions which apply to
this software are provided in Appendix H.
This product includes software developed
by the OpenSSL Project for use in the
OpenSSL Toolkit
*getty
*hostname sysutils
*ifconfig
*kill
net-tools-1.52
sysutils
(http://www.openssl.org)
*mkcramfs
*ntfs-3g
cramfs
curl
The terms and conditions which apply to
this software are provided in Appendix A.
ntfs-3g 2009.4.4
TinyLogin-0.80
sysutils
*passwd
*ps
*freetype
The terms and conditions which apply to
this software are provided in Appendix G.
Recommended advertisement is:
Portions of this software are copyright ©
<year> The FreeType
*route
net-tools-1.52
sfdisk-3.07
*sfdisk
*shutdown
*tinylogin
*hotplug
*utelnetd
*procps
sysutils
reserved.
TinyLogin-0.80
hotplug-1.8
utelnetd-0.1.3
procps-3.2.8
freetype-2.1.2
GNU Bash-2.05
GNU termcap 1.3
zlib-1.2.3
jpeg
expat
mng
png
xml
The terms and conditions which apply to this
software are provided in Appendix B.
The terms and conditions which apply to
this software are provided in Appendix I.
*libfreetype.so.6.3.
*libtermcap.so
*libtermcap.so.2.0.8
zlib
The terms and conditions which apply to this
software are provided in Appendix C.
The terms and conditions which apply to this
software are provided in Appendix D.
The terms and conditions which apply to this
software are provided in Appendix E.
The terms and conditions which apply to this software are
provided in Appendix F.
zlib
The terms and conditions which apply to
this software are provided in Appendix F.
libusb.so
uClibc
libusb-0.1.12
LGPL 2.1
uClibc-nptl-0.9.29- LGPL 2.1
20070423
Elecktra
Ping6
Ping
BSD-new
BSD-new
BSD-new
BSD-new
tcpdump
tcpdump-4.0.0
BSD-new
The terms and conditions which apply to this software are
provided in Appendix M.
Tftp
strace
strace 4.5.18
BSD-new
Tracepath6
Tracepath
Traceroot6
BSD-new
BSD-new
BSD-new
The terms and conditions which apply to this software are
provided in Appendix M.
hdparm
hdparm-6.9
BSD-new
Unzip
Vedit
Vi
BSD-new
BSD-new
BSD-new
The terms and conditions which apply to this software are
provided in Appendix M.
libpcap
libcap-1.0.0
BSD-new
The terms and conditions which apply to this software are
provided in Appendix M.
View
Ltdl
BSD-new
LPGL
portmap
portmap
BSD-old
fontconfig
pixman
The terms and conditions which apply to this software are
provided in Appendix J.
qlite
Advertising sentence is:
Copyright (c) 1990 The Regents
of the University of California. All
rights reserved.
malloc-extras
xslt
init
openssl
openssl 0.9.8k
BSD-old. See
advertisement
notice above.
nandtest
36
Utility
License
Utility
agetty
awk
License
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
Utility
nice
License
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
pata_platform.ko
scsi_wait_scan.ko
Badblocks
compile_et
e2fsck
GPL
od
GPL
cat
pivot_root
printenv
printf
pwd
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.1
GPL2.1
GPL2.1
Unique license
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
GPL2.0
chgrp
chmod
chown
chroot
cmp
flash_erase
flash_eraseall
flash_info
fsck
readlink
reboot
renice
rmdir
rm
cp
cut
geneccerror
hdparm
date
dd
rmmod
samba
sdiff
hotplog
df
libcom_err
libe2p
diff3
diff
sed
libext2fs
dirname
dmesg
du
seq
libgcc_s
simpleinit
sleep
sort
libnandutils
libproc
echo
egrep
env
nanddump
nandwrite
netstat
stty
swapoff
swapon
sync
expr
ntpdate
false
fgrep
find
top
syslogd
tail
tune2fs
ubiattach
ubicrc32
ubidetach
ubiformat
ubimkvol
ubinfo
free
tar
gawk
grep
tee
touch
tr
gunzip
gzexe
gzip
true
tty
ubinize
head
hexdump
hostname
id
umount
unnamed
uniq
ubirename
ubirmvol
ubiupdatevol
vmstat
unzip
wc
install
kill
libusb-config
libusbpp
libuuid
which
whoami
xargs
yes
klogd
ln
Tip
logger
login
ls
Unzip
zcat
brcm_wifi.hotplug
hostname
libss
zcmp
zdiff
lsmod
lzo
zforce
zgrep
zmore
znew
libstdc++
mk_cmds
mke2fs
md5sum
mkdir
mknod
mkswap
modprobe
more
mount
mv
mklost+found
mount.hotplug
mtdinfo
nandsim.ko
tftpd
ncurses
37
Luxi Font Copyright
Luxi fonts copyright (c) 2001 by Bigelow & Holmes Inc. Luxi font instruction code copyright (c) 2001 by URW++ GmbH.
All Rights Reserved. Luxi is a registered trademark of Bigelow & Holmes Inc. Permission is hereby granted, free of
charge, to any person obtaining a copy of these Fonts and associated documentation files (the “Font Software”), to
deal in the Font Software, including without limitation the rights to use, copy, merge, publish, distribute, sublicense, and/
or sell copies of the Font Software, and to permit persons to whom the Font Software is furnished to do so, subject to
the following conditions:
The above copyright and trademark notices and this permission notice shall be included in all copies of one or more
of the Font Software.
The Font Software may not be modified, altered, or added to, and in particular the designs of glyphs or characters in the
Fonts may not be modified nor may additional glyphs or characters be added to the Fonts. This License becomes null
and void when the Fonts or Font Software have been modified.
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT
SHALL BIGELOW & HOLMES INC. OR URW++ GMBH. BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR
INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.
Except as contained in this notice, the names of Bigelow & Holmes Inc. and URW++ GmbH. shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Font Software without prior written
authorization from Bigelow & Holmes Inc. and URW++ GmbH.
For further information, contact:
Appendix A - CURL license
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2009, Daniel Stenberg, <[email protected]>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted,
provided that the above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED „AS IS“, WITHOUTWARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OFTHIRD PARTY RIGHTS.IN NO EVENT SHALLTHE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT
OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to
promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.
Appendix B - JPEG License
LEGAL ISSUES
============
In plain English:
1. We don’t promise that this software works. (But if you find any bugs, please let us know!)
2. You can use this software for whatever you want. You don’t have to pay us.
3. You may not pretend that you wrote this software. If you use it in a program, you must acknowledge somewhere in
your documentation that you’ve used the IJG code.
In legalese:
The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality,
accuracy, merchantability, or fitness for a particular purpose. This software is provided “AS IS”, and you, its user,
assume the entire risk as to its quality and accuracy.
This software is copyright (C) 1991-1998, Thomas G. Lane.
All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose,
without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this README file must be included, with this
copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be
clearly indicated in accompanying documentation.
(2) If only executable code is distributed, then the accompanying documentation must state that “this software is based
38
in part on the work of the Independent JPEG Group”.
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable
consequences; the authors accept NO LIABILITY for damages of any kind.
These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you
use our work, you ought to acknowledge us.
Permission is NOT granted for the use of any IJG author’s name or company name in advertising or publicity relating
to this software or products derived from it. This software may be referred to only as “the Independent JPEG Group’s
software”.
We specifically permit and encourage the use of this software as the basis of commercial products, provided that all
warranty or liability claims are assumed by the product vendor.
Appendix C - MNG License
/* *********************************************************************************************************************************
COPYRIGHT NOTICE:
Copyright (c) 2000 Gerard Juyn ([email protected])
[You may insert additional notices after this sentence if you modify this source]
For the purposes of this copyright and license, “Contributing Authors” is defined as the following set of individuals:
Gerard Juyn
The MNG Library is supplied “AS IS”. The Contributing Authors disclaim all warranties, expressed or implied, including,
without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors assume
no liability for direct, indirect, incidental, special, exemplary, or consequential damages, which may result from the use
of the MNG Library, even if advised of the possibility of such damage.
Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose,
without fee, subject to the following restrictions:
1. The origin of this source code must not be misrepresented; you must not claim that you wrote the original software.
2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source.
3. This Copyright notice may not be removed or altered from any source or altered source distribution.
The Contributing Authors specifically permit, without fee, and encourage the use of this source code as a component
to supporting the MNG and JNG file format in commercial products. If you use this source code in a product,
acknowledgment would be highly appreciated.
Parts of this software have been adapted from the libpng package. Although this library supports all features from the
PNG specification (as MNG descends from it) it does not require the libpng package. It does require the zlib library and
optionally the IJG jpeg library, and/or the “little-cms” library by Marti Maria (depending on the inclusion of support for
JNG and Full-Color-Management respectively.
This library’s function is primarily to read and display MNG animations. It is not meant as a full-featured image-editing
component! It does however offer creation and editing functionality at the chunk level. (future modifications may include
some more support for creation and or editing)
*/
Appendix D - PNG License File Distribution Clause
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code
as a component to supporting the PNG file format in commercial products. If you use this source code in a product,
acknowledgment is not required but would be appreciated.
Appendix E – XML License
Except where otherwise noted in the source code (e.g. the files hash.c, list.c and the trio files, which are covered by a
similar licence but with different Copyright notices) all the files are:
Copyright (C) 1998-2003 Daniel Veillard. All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated
documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the
Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUTWARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE DANIEL VEILLARD BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
39
Except as contained in this notice, the name of Daniel Veillard shall not be used in advertising or otherwise to promote
the sale, use or other dealings in this Software without prior written authorization from him.
Appendix F – zlib Distribution Conditions
This software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for
any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it
and redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If
you use this software in a product, an acknowledgment in the product documentation would be appreciated but is
not required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original
software.
3. This notice may not be removed or altered from any source distribution.
Jean-loup Gailly
Mark Adler
If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign.The sources
are provided for free but without warranty of any kind. The library has been entirely written by Jean-loup Gailly and Mark
Adler; it does not include third-party code.
If you redistribute modified sources, we would appreciate that you include in the file ChangeLog history information
documenting your changes. Please read the FAQ for more information on the distribution of modified source versions.
Appendix G – Freetype License
The FreeType Project LICENSE
------------------------------------------
2006-Jan-27
Copyright 1996-2002, 2006 by
David Turner, Robert Wilhelm, and Werner Lemberg
Introduction
=========
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType
font engine, various tools and contributions which rely on, or relate to, the FreeType Project.
This license applies to all files found in such packages, and which do not fall under their own explicit license.The license
affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage
inclusion and use of free software in commercial and freeware products alike. As a consequence, its main points are
that:
o
o
o
We don’t promise that this software works. However, we will be interested in any kind of bug reports. (`as is’
distribution)
You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free’
usage)
You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge
somewhere in your documentation that you have used the FreeType code. (`credits’)
We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial
products. We disclaim all warranties covering The FreeType Project and assume no liability related to The FreeType
Project.
Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license.We thus
encourage you to use the following text:
“””
Portions of this software are copyright © <year> The FreeType Project (www.freetype.org). All rights reserved.
“””
Please replace <year> with the value from the FreeType version you actually use.
Legal Terms
=========
0. Definitions
-----------------
Throughout this license, the terms `package’, `FreeType Project’, and `FreeType archive’ refer to the set of files
originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project’, be
they named as alpha, beta or final release.
40
`You’ refers to the licensee, or person using the project, where `using’ is a generic term including compiling the project’s
source code as well as linking it to form a `program’ or `executable’. This program is referred to as `a program using
the FreeType engine’.
This license applies to all files distributed in the original FreeType Project, including all source code, binaries and
documentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original archive. If
you are unsure whether or not a particular file is covered by this license, you must contact us to verify this.
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights
reserved except as specified below.
1. No Warranty
-------------------
THE FREETYPE PROJECT IS PROVIDED `AS IS’ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.
2. Redistribution
---------------------
This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform,
compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and
object code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the
rights granted herein, subject to the following conditions:
o
Redistribution of source code must retain this license file (`FTL.TXT’) unaltered; any additions, deletions or changes
to the original files must be clearly indicated in accompanying documentation.The copyright notices of the unaltered,
original files must be preserved in all copies of source files.
o
Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of
the FreeType Team, in the distribution documentation. We also encourage you to put an URL to the FreeType web
page in your documentation, though this isn’t mandatory.
These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If
you use our work, you must acknowledge us. However, no fee need be paid to us.
3. Advertising
------------------
Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or
promotional purposes without specific prior written permission.
We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your
documentation or advertising materials: `FreeType Project’, `FreeType Engine’, `FreeType library’, or `FreeType
Distribution’.
As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted
material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and modify
it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all
the terms of this license.
4. Contacts
---------------
There are two mailing lists related to FreeType:
Discusses general use and applications of FreeType, as well as future and wanted additions to the library and
distribution.
If you are looking for support, start in this list if you haven’t found anything to help you in the documentation.
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.
--- end of FTL.TXT ---
Appendix H – Openssl License
LICENSE ISSUES
==============
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original
SSLeay license apply to the toolkit.
See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any
license issues related to OpenSSL, please contact [email protected].
41
OpenSSL License
------------------------
/* ====================================================================
Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.
openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived
from this software without prior written permission. For written permission, please contact openssl-core@openssl.
org.
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without
prior written permission * of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software
developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY EXPRESSED OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT
OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES;LOSS OF USE, DATA, OR PROFITS;OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by EricYoung ([email protected]).This product includes software
written by Tim Hudson ([email protected]).
*/
Original SSLeay License
--------------------------------
All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written
so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The
following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the
SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that
the holder is Tim Hudson ([email protected]).
Copyright remains EricYoung’s, and as such any Copyright notices in the code are not to be removed. If this package is
used in a product, EricYoung should be given attribution as the author of the parts of the library used.This can be in the
form of a textual message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you
must include an acknowledgement: “This product includes software written by Tim Hudson ([email protected])”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
42
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, ORTORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e.
this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]
*/
Appendix I – Expat License
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002,
2003, 2004, 2005, 2006 Expat maintainers.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated
documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the
Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUTWARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
Appendix J – Portmap License
/*-
Copyright (c) 1990 The Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
This product includes software developed by the University of California, Berkeley and its contributors.
4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS’’ AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES;LOSS OF USE, DATA, OR PROFITS;OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
Appendix K – GNU GPL 2.0
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free software -- to make sure the
software is free for all its users.This General Public License applies to most of the Free Software Foundation’s software
and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered
by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
43
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that
you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free
programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender
the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you
modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the
rights that you have.You must make sure that they, too, receive or can get the source code. And you must show them
these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no
warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to
know that what they have is not the original, so that any problems introduced by others will not reflect on the original
authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors
of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The “Program”, below, refers to any such program
or work, and a “work based on the Program” means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated
into another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee
is addressed as “you”.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running the Program is not restricted, and the output from the Program is covered only if its contents
constitute a work based on the Program (independent of having been made by running the Program). Whether that is
true depends on what the Program does.
1.You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided
that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other
recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
2.You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet
all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running
for such interactive use in the most ordinary way, to print or display an announcement including an appropriate
copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users
may redistribute the program under these conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based
on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from
the Program, and can be reasonably considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the
same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the
terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every
part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on
the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this
License.
44
3.You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the
terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete machine-readable copy of the corresponding source
code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code or
executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work,
complete source code means all the source code for all modules it contains, plus any associated interface definition
files, plus the scripts used to control compilation and installation of the executable. However, as a special exception,
the source code distributed need not include anything that is normally distributed (in either source or binary form) with
the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that
component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though
third parties are not compelled to copy the source along with the object code.
4.You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your
rights under this License. However, parties who have received copies, or rights, from you under this License will not
have their licenses terminated so long as such parties remain in full compliance.
5.You are not required to accept this License, since you have not signed it. However, nothing else grants you permission
to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program
or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You
may not impose any further restrictions on the recipients’ exercise of the rights granted herein.You are not responsible
for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of
the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both
it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the
section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system, which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems
or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which
applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Program does not specify a version number of this
License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to
the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals
45
of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM,
TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS
PERMITTED ABOVE, BE LIABLETOYOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
Appendix L – GNU LGPL 2.1
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License,
version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software -- to make sure
the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages -- typically
libraries -- of the Free Software Foundation and other authors who decide to use it.You can use it too, but we suggest
you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in
any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are
designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you
wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in
new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
surrender these rights.These restrictions translate to certain responsibilities for you if you distribute copies of the library
or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights
that we gave you.You must make sure that they, too, receive or can get the source code. If you link other code with the
library, you must provide complete object files to the recipients, so that they can relink them with the library after making
changes to the library and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives
you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library
is modified by someone else and passed on, the recipients should know that what they have is not the original version,
so that the original author’s reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.
Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom
of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license,
the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary
General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free
programs.
46
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally
speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits
such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more
lax criteria for linking other code with the library.
We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the
ordinary General Public License. It also provides other free software developers Less of an advantage over competing
non-free programs.These disadvantages are the reason we use the ordinary General Public License for many libraries.
However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library,
so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more
frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain
by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use
a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many
more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of
a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified
version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference
between a “work based on the library” and a “work that uses the library”. The former contains code derived from the
library, whereas the latter must be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public
License (also called “this License”). Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application
programs (which use some of those functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A
“work based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work
containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into
another language. (Hereinafter, translation is included without limitation in the term “modification”.)
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the
scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running a program using the Library is not restricted, and output from such a program is covered only if its
contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether
that is true depends on what the Library does and what the program that uses the Library does.
1.You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer
of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a
copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
2.You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and
copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of
these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any
change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this
License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that
uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith
effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and
performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function
must be optional: if the application does not supply it, the square root function must still compute square roots.)
47
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms
of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part
regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on
the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this
License.
3.You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy
of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other
change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License
applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4.You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding
machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access
to copy the source code from the same place satisfies the requirement to distribute the source code, even though third
parties are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being
compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of
the Library, and therefore falls outside the scope of this License.
However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a “work that uses the library”. The executable is therefore
covered by this License. Section 6 states terms for distribution of such executables.
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the
work may be a derivative work of the Library even though the source code is not.
Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library.
The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and
small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether
it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under
Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with
the Library itself.
6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library
to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided
that the terms permit modification of the work for the customer’s own use and reverse engineering for debugging such
modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use
are covered by this License. You must supply a copy of this License. If the work during execution displays copyright
notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to
the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object
code and/or source code, so that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run
time a copy of the library already present on the user’s computer system, rather than copying library functions into
the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as
the modified version is interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified
48
in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy
the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the “work that uses the Library” must include any data and utility programs
needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need
not include anything that is normally distributed (in either source or binary form) with the major components (compiler,
kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means you cannot use both them and the Library together in
an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with
other library facilities not covered by this License, and distribute such a combined library, provided that the separate
distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that
you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other
library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and
explaining where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under
this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will
automatically terminate your rights under this License. However, parties who have received copies, or rights, from you
under this License will not have their licenses terminated so long as such parties remain in full compliance.
9.You are not required to accept this License, since you have not signed it. However, nothing else grants you permission
to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept
this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library
or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives
a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and
conditions.You may not impose any further restrictions on the recipients’ exercise of the rights granted herein.You are
not responsible for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited
to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of
the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it
and this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the
section is intended to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which
applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Library does not specify a license version number,
you may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation,
49
write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two
goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of
software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY,
TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OFTHE LIBRARY IS WITHYOU. SHOULDTHE LIBRARY PROVE DEFECTIVE,YOU ASSUME
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN
IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it
free software that everyone can redistribute and change.You can do so by permitting redistribution under these terms
(or, alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file
to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer
to where the full notice is found.
<one line to give the library’s name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General
Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option)
any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the
Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.You should also get your employer (if you work
as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample;
alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by
James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
Appendix M – BSD-New
/*
Copyright (c) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
The Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that: (1) source
code distributions retain the above copyright notice and this paragraph in its entirety, (2) distributions including binary
code include the above copyright notice and this paragraph in its entirety in the documentation or other materials
provided with the distribution, and (3) all advertising materials mentioning features or use of this software display the
following acknowledgement:
``This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its
contributors.’’ Neither the name of the University nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED ``AS IS’’ AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
*/
50
Appendix N – CinemaNow
Third Party Requirements
a. gSOAP.
The following notice is applicable to the CinemaNow SDK. Company is required to include such notice in the
documentation for any Embedded Products it distributes.
Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2004 Robert A. van Engelen, Genivia Inc. All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
b. [THE CODE IS BEING PROVIDED IN OBJECT CODE SO THE ABOVE DOESN’T APPLY]
c. Curl/ 7.12.2
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2009, Daniel Stenberg, <[email protected]>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted,
provided that the above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUTWARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OFTHIRD PARTY RIGHTS.IN NO EVENT SHALLTHE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT
OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to
promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.
d. C-ARES 1.6.0
Copyright 1998 by the Massachusetts Institute of Technology.
Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is
hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this
permission notice appear in supporting documentation, and that the name of M.I.T.not be used in advertising or publicity
pertaining to distribution of the software without specific, written prior permission. M.I.T. makes no representations
about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.
e. Openssl 0.9.5a
Original SSLeay License
----------------------------
This package is an SSL implementation written by EricYoung ([email protected]).The implementation was written so
as to conform with Netscapes SSL.This library is free for commercial and non-commercial use as long as the following
conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash,
DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same
copyright terms except that the holder is Tim Hudson ([email protected]).
Copyright remains EricYoung’s, and as such any Copyright notices in the code are not to be removed. If this package is
used in a product, EricYoung should be given attribution as the author of the parts of the library used.This can be in the
form of a textual message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
“This product includes cryptographic software written by EricYoung ([email protected])”.The word ‘cryptographic’can
be left out if the routines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must
51
include an acknowledgement: “This product includes software written by Tim Hudson ([email protected])”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The license and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this
code cannot simply be copied and put under another distribution license [including the GNU Public License.]
Content owners use Windows Media digital rights management technology (WMDRM) to protect their intellectual
property, including copyrights.This device uses WMDRM software to access WMDRM-protected content. If the WMDRM
software fails to protect the content, content owners may ask Microsoft to revoke the software’s ability to use WMDRM
to play or copy protected content. Revocation does not affect unprotected content. When you download licenses for
protected content, you agree that Microsoft may include a revocation list with the licenses. Content owners may require
you to upgrade WMDRM to access their content. If you decline an upgrade, you will not be able to access content that
requires the upgrade.
Printed in China
811-215091W011
|