OWNER’S MANUAL
Model No. TMBL2
®
Toastmaster
P E R S O N A L B L E N D E R
ADDITIONAL IMPORTANT SAFEGUARDS
1. All users of this appliance must read and understand this
Owner’s Manual before operating or cleaning this appliance.
2. The cord to this appliance should be plugged into a 120V AC
electrical outlet only.
3. Do not leave this appliance unattended during use.
4. If this appliance begins to malfunction during use, immediately
turn the Control Switch to the (O) OFF position and unplug
the cord. Do not use or attempt to repair the malfunctioning
appliance.
5. If this appliance falls or accidentally becomes immersed in
water, unplug it immediately. Do not reach into the water!
Do not use this appliance after it has fallen into or becomes
immersed in water.
6. To reduce the risk of injury to persons or property, never use
this appliance in an unstable position.
7. Do not use this appliance for other than its intended use.
8. Do not use if the Blending Jar is cracked or chipped.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to
fit into a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.
SHORT CORD INSTRUCTIONS
A short power supply cord is provided to reduce the risk resulting
from becoming entangled in or tripping over a longer cord.
Do not use an extension cord with this product.
PLASTICIZER WARNING
CAUTION: To prevent Plasticizers from migrating from the finish of
the counter top or table top or other furniture, place
NON-PLASTIC coasters or place mats between the appliance
and the finish of the counter top or table top.
Failure to do so may cause the finish to darken, permanent
blemishes may occur or stains can appear.
ELECTRIC POWER
If the electrical circuit is overloaded with other appliances, your
appliance may not operate properly. It should be operated on a
separate electrical circuit from other appliances.
3
GETTING TO KNOW YOUR
®
TOASTMASTER PERSONAL BLENDER
PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATIONS
1.
1. Cap (P/N 71252)
2. Blending Jar Lid (P/N 71253)
2.
3. Blending Jar (P/N 71254)
3.
4. Rubber Seal Ring
MAX
500ml
400ml
(P/N 71255)
300ml
200ml
5. Blade Assembly (P/N 71256)
6. Motor Housing
7. Control Button
8. Cord Storage
9. Non-Slip Rubber feet
10. Power Cord with
Polarized Plug
4.
5.
6.
7.
8.
10.
9.
Figure 1
BEFORE USING FOR THE FIRST TIME
CAUTION: Use extreme care when handling the Blade Assembly.
Do not touch the Blades with your fingers. The Blades are very
sharp and can cause injury if touched.
1. Carefully unpack the Blender, Blending Jar, and all parts.
2. Before using your appliance for the first time and after each
use, wash the Cap, Blending Jar and Blending Jar Lid in warm
soapy water. Rinse and dry thoroughly.
3. Make sure the cord is unplugged.
Caution: To protect against risk of electrical shock, do not place
Motor Housing, plug or cord in water or any other liquid.
4. Wipe the Motor Housing clean with a moistened cloth.
Dry thoroughly.
4
BLENDER ASSEMBLY INSTRUCTIONS
NOTE: Before assembling, make sure the cord is unplugged.
CAUTION: Use extreme care when handling the Blade Assembly.
Do not touch Blades with your fingers. The Blades are very
sharp and can cause injury if touched.
1. Carefully place the Rubber Seal Ring
over the Blade Assembly.
2. Place the Blade Assembly in the
Blending Jar by lining up the two tabs
on the side of the Blade assembly with
the two slots on the Blending Jar (see
Figure 2
Figure 2).
3. Push up and turn the Blade Assembly clockwise to firmly
secure it into position on the Blending Jar. To remove, turn
Blade assembly counterclockwise and pull down.
4. Carefully place the Blending Jar over the Motor Housing by
aligning the notches on the bottom of the jar with the grooves
in the base.
5. Once Blending Jar is in place, turn clockwise until the Blending
Jar locks into position.
NOTE: The Collar and Blade must be firmly attached to
the Blending Jar before putting any foods or liquids into the
Blending Jar.
OPERATING INSTRUCTIONS
CAUTION: Keep hands and utensils out of the Blending Jar while
blending to prevent the possibility of severe injury to persons
or damage to the unit. A scraper may be used but must only
be used when the unit is not running.
CAUTION: Use extreme care when handling the Blender Blade.
Do not touch Blades with your fingers. The Blades are very
sharp and can cause injury if touched.
1. Before starting, make sure power cord is unplugged.
2. Make sure that the Blade Assembly, Rubber Seal Ring, and
Collar are properly assembled and securely fastened to the
Blending Jar. See Assembly Instructions for details.
3. Place the Blending Jar on top of the Motor Housing making sure
it is securely locked into the Motor Housing.
5
OPERATING INSTRUCTIONS (CONTINUED)
NOTE: Do not fill the Blending Jar more than the MAX fill line
(500ml). Never operate when the Blending Jar is empty.
CAUTION: Never place the Blade Assembly on the Motor Housing
without the Blending Jar being completely assembled and
securely tightened.
4. Place Blending Jar Lid with Cap on Blending Jar. Remember:
Always hold Lid in place during processing.
5. Plug the power cord into a 120V AC electrical outlet. Press
and hold the Control Button. Blend until ingredients have
reached desired consistency.
CAUTION: If Blending Jar rotates during blending, immediately
release the Control Button, then secure by turning until the
Blending Jar locks into place as described in the BLENDER
ASSEMBLY INSTRUCTIONS.
• Do not touch Blades
• Do not interfere with the Blade movement
• Do not remove Blending Jar Lid
6. When blending is completed, release the Control Button to
stop the Blender, and unplug the unit.
HOT INGREDIENTS
CAUTION: Use extreme caution when blending hot liquids to
avoid accidental scalding or burns. Do not use your hand to
cover opening!
NOTE: When processing hot foods, always remove the Cap from
the Lid before beginning.
• DO NOT put more than 2.5 ounces of hot ingredients into the
Blending Jar before beginning to blend.
• After the blending process has begun, you may slowly add up
to an additional 2.5 ounces of hot ingredients through the cen-
ter hole in the Lid.
• Always use a vessel with a pouring spout when adding hot
ingredients.
6
USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Any servicing that
requires disassembly must be performed by a qualified appliance
repair technician.
CAUTION: Never immerse the Motor Housing, plug or cord in
water or any other liquid.
1. Always unplug the unit before cleaning.
2. Whenever possible, rinse parts immediately after processing to
make cleanup easier.
CAUTION: Use extreme care when handling the Blade Assembly.
Do not touch the Blades with your fingers. The Blades are very
sharp and can cause injury if touched.
3. Wash the Blending Jar, Lid, and Cap in warm soapy water.
Rinse and dry thoroughly. Never use rough scouring pads or
abrasive cleansers on any plastic or metal parts as the surface
may be damaged. Do not wash the Lid, Cap and Blending Jar in
the dishwasher.
4. If necessary, wipe exterior surface with a moist cloth or sponge
and dry thoroughly.
5. Do not fill the Blending Jar with boiling water or place any of
the parts in boiling water.
6. Do not allow the Blade Assembly to soak in water for long peri-
ods of time.
7. For quick clean-ups, the interior of the Blending Jar can be
cleaned by turning the Blender ON and OFF for several short
bursts. The unit will clean itself, without you having to handle
the sharp Blades. Unplug the Blender, rinse and dry thoroughly,
being careful as the Blades are sharp.
8. Properly reassemble all parts and wrap the cord around the
cord storage before storing.
7
Figure 3
STORAGE
CAUTION: Always assemble clean and dry Blender parts correctly
before storing on the Motor Housing. Severe injury can result
if Blender is accidentally turned ON when not properly assem-
bled.
Unplug and clean unit. Store in original box or in a clean, dry
place. Never store Blender while it is hot or plugged in. Never
wrap cord tightly around the appliance. Never place any stress on
cord, especially where the cord enters the unit, as this could cause
the cord to fray and break.
CORD STORAGE
This unit is equipped with Cord Storage. To use, simply pull down
the bottom section of the unit and wrap cord around the base (see
Figure 3).
8
LIMITED ONE-YEAR WARRANTY
Warranty Coverage: This product is warranted to be free from defects in materials or workman-
ship for a period of one (1) year from the original purchase date. This product warranty is
extended only to the original consumer purchaser of the product and is not transferable. For a
period of one (1) year from the date of original purchase of the product, our Repair Center will,
at its option, either (1) repair the product or (2) replace the product with a reconditioned com-
parable model. These remedies are the purchaser's exclusive remedies under this warranty.
Warranty Service: To obtain warranty service, you must call our warranty service number at
1-800-947-3744 for return instructions on how to deliver the product, in either the original pack-
aging or packaging affording an equal degree of protection to the Repair Center specified below.
You must enclose
a
copy of your sales receipt or other proof of purchase
to demonstrate eligibility for warranty coverage.
To return the appliance, ship to:
To contact us, please write to, call, or email:
ATTN: Repair Center
708 South Missouri Street
Macon, MO 63552 USA
Consumer Relations Department
PO Box 7366
Columbia, MO 65205-7366 USA
1-800-947-3744
E-mail: [email protected]
What Is Not Covered: This warranty does not cover damage resulting from misuse, accident,
commercial use, improper service or any other damage caused by anything other than defects
in material or workmanship during ordinary consumer use. This warranty is invalid if the serial
number has been altered or removed from the product. This warranty is valid only in the
United States and Canada.
LIMITATION ON DAMAGES: THERE SHALL BE NO LIABILITY FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR
CONDITION ON THIS PRODUCT.
DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ALL IMPLIED WARRANTIES AND CONDITIONS, INCLUDING, WITHOUT LIMITATION,
IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PAR-
TICULAR PURPOSE OR USE ON THIS PRODUCT ARE LIMITED IN DURATION TO THE DURA-
TION OF THIS WARRANTY.
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential dam-
ages, or allow limitations on how long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights and you
may have other rights under the laws of your jurisdiction.
© 2006 Toastmaster Inc.
All Rights Reserved
Rev. 06/06
Printed in China
9
|