Nighthawk 2/3 Camera Kit Easy Setup Guide
Package Contents
Connecting the receiver to record on a VCR
A
B
RECEIVER
Packaging
Quick Start Manual
TV
Plug the power supply
into the receiver
D.
Receiver Power
Supply
Component
INPUTS
1
2
Video
2 or 3 NightHawk
Cameras
INPUTS
Video
OUTPUT
1
3
Connect the A/V cable
from the receiver to
the VCR
Receiver
VCR
Hardware
AUDIO VIDEO
LINE IN
Camera Power
Supplies
AV Cable
Remote Control
LINE OUT
Connect the A/V cable
C. to the INPUT on the
back of the TV
Connecting the receiver to your TV
C
Connect an A/V cable
B. from the Line OUTPUT
on the back of the VCR
Back of Receiver
Back of TV
INPUTS
1
3
Viewing the cameras and recording to VCR
D
2. Using your TV’s remote
3. Using your VCR’s remote 4.You should now see
Power on the Receiver,
VCR and TV
1.
control tune your TV to
the correct INPUT*. In our the LINE 1 INPUT*
example above the TV
control tune your VCR to
your cameras on the
TV screen. Follow
your manufacturer’s
instructions to
1. Connect the AV cable to the back of the Receiver
2. Connect the AV cable to an available Video INPUT on TV
3. Tune TV to the correct INPUT* using TV remote
should be set to INPUT 1
record to your VCR
*Some VCR’s and TV’s will list this as INPUT, A/V, SOURCE, L1, Channel 0 - Consult your manufacturer’s manual for more information
6ZDQQꢀ&RPPXQLFDWLRQVꢀ‡ꢀ7ROOꢀ)UHHꢀ7HFKQLFDOꢀ6XSSRUWꢁꢀ86$ꢀꢂꢀ1 877 274 3695ꢃꢀ$XVWUDOLDꢀꢂꢀ1300 13 8324ꢀ‡ꢀ(PDLOꢁꢀ[email protected]
|