OUTDOOR HOUSING MOUNTING BRACKET
Installation and Operation Instructions for the following models:
UNI-PMA1, SNCAPM3
(1) Supplied Parts
(1) Mount bracket
(4) Hex head bolts (3/8" - 16 x 1")
(4) Lockwasher (3/8")
(4) Flat washers (3/8")
UNI-CMA1, SNCACA2
(1) Supplied Parts
(1) Wall mount bracket
(4) Hex head bolts (3/8" - 16 x 1")
(4) Lockwasher (3/8")
(4) Flat washers (3/8")
(1) Operation Instruction Manual
12/27/05
81-IN6564
IMPORTANT SAFEGUARDS
SAFETY PRECAUTIONS
1
2
Read Instructions - All the safety and operating
instructions should be read before the unit is
operated.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
Retain Instructions - The safety and operating
instructions should be retained for future
reference.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
3
4
5
6
Heed Warnings - All warnings on the unit and in
the operating instructions should be adhered to.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
Follow Instructions - All operating and user
instructions should be followed.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
Electrical Connections - Only a qualified
electrician should make electrical connections..
The lightning flash with an arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of non-insulated “dangerous voltage”
within the product’s enclosure that may be
of sufficient magnitude to constitute a risk
of electric shock to persons.
Attachments - Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
7
8
Cable Runs - All cable runs must be within
permissible distance
Mounting - This unit must be properly and securely
mounted to a supporting structure capable of
sustaining the weight of the unit.
The exclamation point within an equilateral
triangle is intended to alert the user to
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Accordingly:
!
a. The installation should be made by a qualified
installer.
UNPACKING
b. The installation should be in compliance with
local codes.
Unpack carefully. Electronic components can be
damaged if improperly handled or dropped. If an item
appears to have been damaged in shipment, replace
it properly in its carton and notify the shipper.
c. Care should be exercised to select suitable
hardware to install the unit, taking into
account both the composition of the mounting
surface and the weight of the unit.
Be sure to save:
Be sure to periodically examine the unit and the
supporting structure to make sure that the integrity
of the installation is intact. Failure to comply with the
foregoing could result in the unit separating from the
support structure and falling, with resultant damages or
injury to anyone or anything struck by the falling unit.
1
The shipping carton and packaging material.
They are the safest material in which to make
future shipments of the equipment.
2
These Installation and Operating Instructions.
SERVICE
If technical support or service is needed, contact Sony
at the following number:
TECHNICAL SUPPORT
8:15AM to 7:30PM (Eastern Time)
1-800-883-6817
©2005 Sony Corporation
PRODUCT DISCLAIMER
CAUTION
This unit must be properly and securely mounted to a supporting structure capable of sustaining the weight of the
bracket and camera assembly. Accordingly,
1. The installation should be made by a qualified installer.
2. The installation should be in compliance with local codes.
3. Care should be exercised to select suitable hardware to install the unit, taking into account both the compostition
of the mounting surface and the weight the hardware will be required to sustain.
Be sure to periodically examine the unit and the supporting structure to make sure that the integrity of the installation
is intact.
Failure to comply with the foregoing could result in the unit coming loose from the support structure and falling, with
resultant damages or injury to anyone or anything struck by the falling unit.
© 2005 by Sony Corporation
|