4-145-650-11(1)
The software of this player may be updated in the future. To find out details on any
available updates, please visit:
For customers in European countries
For customers in Australia
To find out useful hints, tips and information about Sony products and services
z
Operating Instructions
Blu-ray Disc / DVD Player
BDP-S760
4-145-650-11(1)
Printed in Japan
© 2009 Sony Corporation
Notice for customers in the
United Kingdom and
Republic of Ireland
WARNING
A molded plug complying with
BS1363 is fitted to this equipment
for your safety and convenience.
Should the fuse in the plug
supplied need to be replaced, a fuse
of the same rating as the supplied
one and approved by ASTA or BSI
to BS1362, (i.e., marked with
To reduce the risk of fire or electric
shock, do not expose this apparatus
to rain or moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing to
qualified personnel only.
Disposal of waste
batteries (applicable in
the European Union and
other European countries
with separate collection
systems)
This symbol on the battery or on
the packaging indicates that the
battery provided with this product
shall not be treated as household
waste.
On certain batteries this symbol
might be used in combination with
a chemical symbol. The chemical
symbols for mercury (Hg) or lead
(Pb) are added if the battery
contains more than 0.0005%
mercury or 0.004% lead.
By ensuring these batteries are
disposed of correctly, you will help
prevent potentially negative
consequences for the environment
and human health which could
otherwise be caused by
or
mark) must be used.
If the plug supplied with this
equipment has a detachable fuse
cover, be sure to attach the fuse
cover after you change the fuse.
Never use the plug without the fuse
cover. If you should lose the fuse
cover, please contact your nearest
Sony service station.
Batteries or batteries installed
apparatus shall not be exposed to
excessive heat such as sunshine,
fire or the like.
CAUTION
The use of optical instruments with
this product will increase eye
hazard. As the laser beam used in
this Blu-ray Disc/DVD player is
harmful to eyes, do not attempt to
disassemble the cabinet.
Refer servicing to qualified
personnel only.
Disposal of Old Electrical
& Electronic Equipment
(Applicable in the
European Union and
other European countries
with separate collection
systems)
This symbol on the product or on
its packaging indicates that this
product shall not be treated as
household waste. Instead it shall be
handed over to the applicable
collection point for the recycling of
electrical and electronic
equipment. By ensuring this
product is disposed of correctly,
you will help prevent potential
negative consequences for the
environment and human health,
which could otherwise be caused
by inappropriate waste handling of
this product. The recycling of
materials will help to conserve
natural resources. For more
inappropriate wastehandling of the
battery. The recycling of the
materials will help to conserve
natural resources.
This label is located on the laser
protective housing inside the
enclosure.
In case of products that for safety,
performance or data integrity
reasons require a permanent
connection with an incorporated
battery, this battery should be
replaced by qualified service staff
only.
To ensure that the battery will be
treated properly, hand over the
product at end-of-life to the
applicable collection point for the
recycling of electrical and
electronic equipment.
This appliance is classified as a
CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT
MARKING is located on the laser
protective housing inside the
enclosure.
detailed information about
For all other batteries, please view
the section on how to remove the
battery from the product safely.
Hand the battery over to the
applicable collection point for the
recycling of waste batteries.
recycling of this product, please
contact your local Civic Office,
your household waste disposal
service or the shop where you
purchased the product.
For customers in Australia
The above symbol is applicable in
the European Union and other
European countries with separate
collection systems.
For more detailed information
about recycling of this product or
battery, please contact your local
Civic Office, your household
waste disposal service or the shop
where you purchased the product.
2
For customers in European
countries
The manufacturer of this product is
Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075
Japan. The Authorized
Representative for EMC and
product safety isSony Deutschland
GmbH, Hedelfinger Strasse 61,
70327 Stuttgart, Germany. For any
service or guarantee matters please
refer to the addresses given in
separate service or guarantee
documents.
• Clean the disc with a cleaning
cloth. Wipe the disc from the
centre out.
Precautions
This equipment has been tested
and found to comply with the
limits set out in the EMC
Directive using a connection
cable shorter than 3 metres.
• Do not use solvents such as
benzine, thinner,
On safety
• To prevent fire or shock
hazard, do not place objects
filled with liquids, such as
vases, on the player, or place
the player near water, such as
near a bathtub or shower room.
Should any solid object or
liquid fall into the cabinet,
unplug the player and have it
checked by qualified
commercially available disc/
lens cleaners, or anti-static
spray intended for vinyl LPs.
• If you have printed the disc’s
label, dry the label before
playing.
• Do not use the following discs.
– A lens cleaning disc.
– A disc that has a non-
standard shape (e.g., card,
heart).
Precautions
• This unit operates on 220 V –
240 V AC, 50 Hz/60 Hz. Check
that the unit’s operating voltage
is identical with your local power
supply.
• To prevent fire or shock hazard,
do not place objects filled with
liquids, such as vases, on the
apparatus.
• Install this unit so that the mains
lead can be unplugged from the
wall socket immediately in the
event of trouble.
personnel before operating it
any further.
• Do not touch the AC power
cord (mains lead) with wet
hands. Doing so may cause an
electric shock.
– A disc with a label or sticker
on it.
– A disc that has cellophane
tape or sticker adhesive on it.
• Do not resurface the playing
side of a disc to remove
surface scratches.
Notes About the Discs
• To keep the disc clean, handle
the disc by its edge. Do not
touch the surface.
Dust, fingerprints, or scratches
on the disc may cause it to
malfunction.
On placement
• Place the player in a location
with adequate ventilation to
prevent heat build-up in the
player.
• Do not place the player on a
soft surface such as a rug that
might block the ventilation
holes.
• Do not install this player in a
confined space, such as a
bookshelf or similar unit.
• Do not place the player in a
location near heat sources, or
in a place subject to direct
sunlight, excessive dust, or
mechanical shock.
• Do not expose the disc to
direct sunlight or heat sources
such as hot air ducts, or leave it
in a car parked in direct
sunlight as the temperature
may rise considerably inside
the car.
• Do not place the player
outdoors, in vehicles, on ships,
or on other vessels.
• If the player is brought directly
from a cold to a warm location,
or is placed in a very damp
room, moisture may condense
on the lenses inside the player.
Should this occur, the player
may not operate properly. In
this case, remove the disc and
leave the player turned on for
about half an hour until the
moisture evaporates.
• After playing, store the disc in
its case.
,continued
3
• Do not install the player in an
inclined position. It is
• Observe following points to
prevent the AC power cord
(mains lead) being damaged.
Do not use the AC power cord
(mains lead) if it is damaged,
as doing so may result in an
electric shock or fire.
– Do not pinch the AC power
cord (mains lead) between
the player and wall, shelf,
etc.
– Do not put anything heavy
on the AC power cord
(mains lead) or pull on the
AC power cord (mains lead)
itself.
Copyrights and
Trademarks
• This product incorporates
copyright protection
technology that is protected by
U.S. patents and other
intellectual property rights.
Use of this copyright
protection technology must be
authorized by Macrovision,
and is intended for home and
other limited viewing uses
only unless otherwise
authorized by Macrovision.
Reverse engineering or
disassembly is prohibited.
• “AVCHD” and the “AVCHD”
logo are trademarks of
Panasonic Corporation and
Sony Corporation.
designed to be operated in a
horizontal position only.
• Keep the player and the discs
away from equipment with
strong magnets, such as
microwave ovens, or large
loudspeakers.
• Do not place metal objects in
front of the front panel. It may
limit reception of radio waves.
• Do not place the player in a
place where medical
equipment is in use. It may
cause a malfunction of
medical instruments.
• If you use a pacemaker or
other medical device, consult
your physician or the
manufacturer of your medical
device before using the
On adjusting volume
Do not turn up the volume while
listening to a section with very
low level inputs or no audio
signals. If you do, your ears and
the speakers may be damaged
when a peak level section is
played.
• Java and all Java-based
trademarks and logos are
trademarks or registered
trademarks of Sun
wireless LAN function.
• This player should be installed
and operated with a minimum
distance of at least 20 cm or
more between the player and a
person’s body (excluding
extremities: hands, wrists, feet
and ankles).
• Do not place heavy or unstable
objects on the player.
• Do not place any objects other
than discs on the disc tray.
Doing so may cause damage to
the player or the object.
• Take out any discs when you
move the player. If you don’t,
the disc may be damaged.
• Disconnect the AC power cord
(mains lead) and all other
cables from the player when
you move the player.
Microsystems, Inc.
•
, “XMB,” and “xross media
bar” are trademarks of Sony
Corporation and Sony
On cleaning
Clean the cabinet, panel, and
controls with a soft cloth. Do not
use any type of abrasive pad,
scouring powder or solvent such
as alcohol or benzine.
Computer Entertainment Inc.
• This product incorporates
High-Definition Multimedia
Interface (HDMI™)
technology. HDMI, the HDMI
logo and High-Definition
Multimedia Interface are
trademarks or registered
trademarks of HDMI
On cleaning discs, disc/
lens cleaners
Do not use cleaning discs or
disc/lens cleaners (including wet
or spray types). These may cause
the apparatus to malfunction.
Licensing LLC.
• “Blu-ray Disc” is a trademark.
• “Blu-ray Disc,” “DVD+RW,”
“DVD-RW,” “DVD+R,”
“DVD-R,” “DVD VIDEO,”
and “CD” logos are
On replacement of parts
In the events that this player is
repaired, repaired parts may be
collected for reuse or recycling
purposes.
trademarks.
On power sources
• The player is not disconnected
from the AC power source
(mains) as long as it is
• “BD-LIVE,” “BD-LIVE”
logo, and “BONUSVIEW” are
trademarks of Blu-ray Disc
Association.
connected to the wall outlet,
even if the player itself has
been turned off.
• “x.v.Colour” and “x.v.Colour”
logo are trademarks of Sony
Corporation.
• Disconnect the player from the
wall outlet if you are not going
to use the player for a long
time. To disconnect the AC
power cord (mains lead), grasp
the plug itself; never pull the
cord.
• “BRAVIA” is a trademark of
Sony Corporation.
• “PhotoTV HD” and the
“PhotoTV HD” logo are
trademarks of Sony
Corporation.
• The Wi-Fi CERTIFIED™
Logo is a certification mark of
the Wi-Fi Alliance.
4
• The Wi-Fi Protected Setup™
Mark is a mark of the Wi-Fi
Alliance.
Notice for the customers in
Europe
• “Wi-Fi CERTIFIED™” and
“Wi-Fi Protected Setup™” are
trademarks of the Wi-Fi
Alliance.
This product is intended to be
used in the following countries:
AD, AL, AT, BA, BE, BG, CH,
CY, CZ, DE, DK, EE, ES, FI,
FR, GB, GR, HR, HU, IE, IS, IT,
LI, LT, LU, LV, MC, MD, ME,
MK, MT, NL, NO, PL, PT, RO,
RS, SE, SI, SK, SM, TR, VA
®
• DLNA , the DLNA Logo and
DLNA CERTIFIED™ are
trademarks, service marks, or
certification marks of the
Digital Living Network
Alliance.
• Microsoft and Windows are
either registered trademarks or
trademarks of Microsoft
Corporation in the United
States and/or other countries.
• Other system and product
names are generally
trademarks or registered
trademarks of the
manufacturers. ™ and ®
marks are not indicated in this
document.
IMPORTANT NOTICE
Caution: This player is
capable of holding a still
video image or on-screen
display image on your
television screen
indefinitely. If you leave the
still video image or on-
screen display image
displayed on your TV for an
extended period of time you
risk permanent damage to
your television screen.
Plasma display panel
televisions and projection
televisions are susceptible to
this.
If you have any questions or
problems concerning your
player, please consult your
nearest Sony dealer.
,continued
5
Notice for the customers in
France
The WLAN feature of this BDP-
S760 shall exclusively be used
inside buildings.
Any use of the WLAN feature of
this BDP-S760 outside of the
buildings is prohibited on the
French territory. Please make
sure that the WLAN feature of
this BDP-S760 is disabled
before any use outside of the
buildings. (ART Decision 2002-
1009 as amended by ART
Decision 03-908, relating to
radio-frequencies use
restrictions).
6
Notice for the customers in
About this manual
• In this manual, “disc” is used
as a general reference for the
BDs, DVDs, or CDs unless
otherwise specified by the text
or illustrations.
Italy
Use of the RLAN network is
governed:
– with respect to private use, by
the Legislative Decree of
1.8.2003, no. 259 (“Code of
ElectronicCommunications”).
In particular Article 104
indicates when the prior
obtainment of a general
authorization is required and
Art. 105 indicates when free
use is permitted;
– with respect to the supply to
the public of the RLAN access
to telecom networks and
services, by the Ministerial
Decree of 28.5.2003, as
amended, and Art. 25 (general
authorization for electronic
communications networks and
services) of the Code of
electronic communications.
– with respect to private use, by
the Ministerial Decree
• Icons, such as
, listed
BD
at the top of each explanation
indicate what kind of discs can
be used with the function
being explained.
For details, see “Playable
• Instructions in this manual
describe the controls on the
remote. You can also use the
controls on the player if they
have the similar symbols as
those on the remote.
• The on-screen display
illustrations used in this
manual may not match the
graphics displayed on your TV
screen.
• NEED-to-know information
(to prevent incorrect
operation) is listed under the
b icon. NICE-to-know
information (tips and other
useful information) is listed
under the z icon.
12.07.2007
Notice for the customers in
Cyprus
The end user must register the
RLAN (or WAS or WiFi)
devices in the Department of
Electronic Communications
(P.I. 6/2006 and P.I. 6A/2006).
P.I. 6/2006 is the
Radiocommunications
(Categories of Stations Subject
to General Authorization and
Registration) Order of 2006.
P.I. 6A/2006 is the General
Authorization for the use of
Radiofrequencies by Radio
Local area Networks and by
Wireless Access Systems,
including Radio Local Area
Networks (WAS/RLAN).
Notice for the customers in
Norway
Use of this radio equipment is
not allowed in the geographical
area within a radius of 20 km
from the centre of Ny-Ålesund,
Svalbard.
7
Table of Contents
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Hooking Up the Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Step 1: Connecting to Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Step 4: Connecting to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Step 7: Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Step 8: Setting Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Playing BDs/DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Playing Photo Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
8
Network Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Video Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
BD/DVD Viewing Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Photo Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Resetting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Video Output Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
About Wireless LAN Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Before operating the player, please read “Terms and Conditions of Use and End User License
9
b
The available functions of the remote differ
depending on the disc or the situation.
Guide to Parts and
Controls
Opens or closes the disc tray.
For more information, see the pages in
parentheses.
THEATRE (page 18)
Switches to the optimum video mode for
watching movies automatically. When
connected with an AV amplifier
(receiver) using the HDMI cable, the
speaker output also switches
automatically.
Remote
When connected with a Theatre Mode-
compatible TV using the HDMI cable,
the TV’s video mode switches to Theatre
Mode.
b
The THEATRE button functions only when
connected to a Sony Theatre Mode-compatible
AV amplifier (receiver) or Sony Theatre
Mode-compatible TV.
Turns on the TV, or sets to standby mode.
Turns on the player, or sets to standby
mode.
Enters the title/chapter numbers, etc.
CLEAR
Clears the entry field.
Displays the elapsed/remaining playback
time in the front panel display. Each time
you press the button, the display switches
between elapsed playback time and
remaining playback time.
Selects the language track when multi-
lingual tracks are recorded on BD-
ROMs/DVD VIDEOs.
Selects the sound track on CDs.
SUBTITLE (page 59)
Selects the subtitle language when multi-
lingual subtitles are recorded on BD-
ROMs/DVD VIDEOs.
Number 5, AUDIO, N, and TV 2+ buttons have
a tactile dot. Use the tactile dot as a reference when
operating the player.
ANGLE
Switches to other viewing angles when
multi-angles are recorded on BD-ROMs/
DVD VIDEOs.
10
Displays the playback information on the
screen.
m/M (fast reverse/fast
forward)
Fast reverses/fast forwards the disc when
pressed during playback.
D Colour buttons (red/green/
yellow/blue)
Each time you press the button, search
speed changes as follows*:
Playback direction
M1 (×10) t M2 (×30) t M3
(×120)
Short cut keys for selecting items on
some BD’s menus (can also be used for
BD’s Java interactive operations).
Opens or closes the BD’s or DVD’s Top
Menu.
Reverse direction
n (×1) t m1 (×10) t m2 (×30)
t m3 (×120)
When you press and hold the button, fast
forward/fast reverse continues at the
selected speed until you release the
button.
* Search speed does not change when playing
CDs and MP3 audio tracks.
POP UP/MENU (page 38)
Opens or closes the BD-ROM’s Pop-up
Menu, or the DVD’s menu.
The options menu that can be selected
appears on the screen.
Speed multiple values are approximate.
– To resume normal playback, press N.
Enters the player’s home menu.
Exits the home menu when a CD is
inserted.
To play in slow, freeze frame (playback
direction only)
Plays BDs/DVDs in slow motion when
M is pressed for more than one second
in pause mode.
RETURN
Returns to the previous display.
Plays one frame at a time when M is
pressed briefly in pause mode.
– To resume normal playback, press N.
</M/m/,
Moves the highlight to select a displayed
item.
Starts or re-starts playback.
Resumes playback from the point where
you press x (Resume Play).
Plays a slideshow when a disc containing
JPEG image files is inserted.
Centre button (ENTER)
Enters the selected item.
F ./> (previous/next)
Skips to the previous/next chapter, track,
or file.
To go to the beginning of the previous
track, press . twice.
Switches to Scene Search mode that lets
you move quickly between scenes within
the title currently being played back.
/
(instant replay/instant
advance)
Replays the scene/briefly fast forwards
the scene.
X (pause)
Pauses or re-starts playback.
Each time you press
, briefly fast
x (stop)
forwards the current scenes for 15
seconds.
Stops playback and remembers the stop
The resume point for a title/track is the
last point you played or the last photo for
a photo folder.
Each time you press
, briefly replays
the current scenes for 10 seconds.
,continued
11
Turns on or off the headphone surround
mode.
Switches between TV and other input
sources.
PHONE LEVEL +/– (page 42)
Adjusts the headphone volume when
headphones are connected and a disc is
being played.
(light)
Lights up the 5 and 6 buttons (except
</M/m/, and ENTER) and is useful
for operation in the dark.
Adjusts the TV volume.
Front panel
The N button has a tactile dot. Use the tactile dot as a reference when operating the player.
Turns on the player, or sets to standby
mode.
I
USB jack (page 46)
Connect a USB device to this jack.
Connect headphones to this jack.
C Blu-ray Disc indicator
Lights up in white when the player is
turned on.
To lock the disc tray (Child Lock)
You can lock the disc tray to prevent it being
opened by mistake.
When the player is turned on, hold down N
on the player for more than 10 seconds until
“LOCKED” appears in the front panel
display. The disc tray is locked.
Lights up in blue when playing BDs.
E WLAN indicator
Lights up when “Wireless” is selected as
a connection method in “Internet
Settings” under the “Network Settings”
To unlock the disc tray, hold down N on the
player until “UNLOCK” appears in the front
panel display.
Starts or stops playback.
Opens or closes the disc tray.
12
Front panel display
A N, X
F Network connection indicator
Lights up when accessing the network
and downloading the player’s software.
For details on downloading the player’s
Lights up during playback or pause.
Lights up when outputting 720p/1080i/
1080p video signals from the HDMI
OUT jack or 720p/1080i video signals
from the COMPONENT VIDEO OUT
jacks.
b
The network connection indicator may not
light up during the network diagnostic or other
operations even when accessing the network.
Lights up when an HDMI device is
recognised.
Lights up when the external memory is
recognised.
E Playback information
You can check the time information.
Press TIME repeatedly during playback.
The display changes as follows.
When playing a BD-ROM/DVD VIDEO
Elapsed time of the current title
r
Remaining time of the current title
When playing a CD
Elapsed time of the current track
r
Remaining time of the current track
r
Elapsed time of the current disc*
r
Remaining time of the current disc*
* Except MP3 audio tracks
z
“T” (Title or Track), “C” (Chapter), or “D”
(Disc) may be displayed depending on the
disc.
,continued
13
Rear panel
A COMPONENT VIDEO OUT
B LINE OUT (S VIDEO) jack
C LINE OUT (R-AUDIO-L) jacks
J DIGITAL OUT (COAXIAL) jack
D MULTI CHANNEL OUTPUT
(FRONT L/R, SURROUND L/R,
SUR BACK L/R, CENTER,
K DIGITAL OUT (OPTICAL) jack
SUBWOOFER) jacks (page 24)
E Ventilation holes
The ventilation fan is inside the player.
14
Hooking Up the Player
Check that you have the following items.
• Audio/video cable (phono plug ×3) (1)
(for Australian model only)
• Mains lead (1)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
Follow steps 1 through 8 to hook up and
adjust the settings of the player. Do not
connect the mains lead until you reach
Hookups and
Settings
15
Step 1: Connecting to Your TV
About video/HDMI OUT jacks
The player has the following video jacks. Connect the player to your TV according to the input
jacks on your TV.
When connecting the player to your TV using the HDMI cable, you can enjoy high quality
digital pictures and sound through the HDMI OUT jack.
Jack type
Video resolution Hookup
High
quality
Digital
High Definition:
1080/24p, 1080p,
1080i, 720p
See “Connecting to an
Standard Definition:
576p/480p, 576i/480i
Analogue
High Definition:
1080i, 720p
See “Connecting to
Standard Definition: (Y, Pb/Cb, Pr/Cr)” on
Standard Definition: See “Connecting to
576i/480i
VIDEO jacks” on
Standard Definition: See “Connecting to
576i/480i
VIDEO jacks” on
Standard
quality
b
To connect to a TV with DVI input
Use an HDMI-DVI converter cable (not
supplied). The DVI jack will not accept any
audio signals, so you have to use another
audio connection in addition to this
• Plug in cables securely to prevent unwanted
noise.
• Refer to the instruction manual supplied with the
components to be connected.
• You cannot connect this player to a TV that does
not have a video input jack.
Furthermore, you cannot connect the HDMI
OUT jack to DVI jacks that are not HDCP
compliant (e.g., DVI jacks on PC displays).
• Do not apply too much pressure on the connecting
cables. Pushing against the cabinet wall, etc., may
damage the cables or jacks.
16
Connecting to an HDMI jack
Connect the player and your TV using an HDMI cable to enjoy high quality digital pictures and
sound through the HDMI OUT jack.
refer to the instruction manual supplied with the TV.
If you connect a 1080/24p- or 1080p-compatible TV, use a High Speed HDMI cable.
Blu-ray Disc/DVD player
HDMI cable (not supplied)
TV
• Do not press the player against the cabinet
wall when you place the player in a cabinet
with the HDMI cable connected. It may
damage the HDMI OUT jack or the HDMI
cable.
Notes on connecting to the HDMI OUT jack
Observe the following as improper handling
may damage the HDMI OUT jack and the
connector.
• Carefully align the HDMI OUT jack on the
rear of the player and the HDMI connector
by checking their shapes. Make sure the
connector is not upside down or tilted.
• When connecting or disconnecting, do not
screw in or rotate the HDMI connector.
About indicators for HDMI connection
When the connected HDMI-compatible
component is recognised, the HDMI
indicator lights up in the front panel display.
• Be sure to disconnect the HDMI cable when
moving the player.
,continued
17
b
• Language Follow
• Not all high definition television sets are fully
compatible with this product and may cause
artifacts to be displayed in the picture. In the case
of 480i/576i/480p/576p/720p/1080i/1080p scan
picture problems, it is recommended that the user
switch the connection to the LINE OUT VIDEO
or S VIDEO jack. If there are questions regarding
our TV set compatibility with this model 480i/
576i/480p/576p/720p/1080i/1080p Blu-ray Disc/
DVD player, please contact our customer service
centre.
When you change the language for the on-
screen display on your TV, the player’s
language for the on-screen display is also
changed after turning the player off and on.
To prepare for the BRAVIA Sync features
Set “Control for HDMI” to “On” in the
For details on settings of your TV or other
connected components, refer to the
instruction manual supplied with the TV or
components.
• If the picture is not clear, not natural or not to your
satisfaction, change the video output resolution in
• Be sure to use only an HDMI cable that bears the
HDMI logo.
z
• When connecting the Sony TV that is compatible
with the “Control for HDMI” Easy Setting
function using the HDMI cable, the “Control for
HDMI” setting of the player automatically
switches to “On” if the “Control for HDMI”
setting on the connected TV is set to “On.” Refer
to the instruction manual supplied with the TV.
• When connecting the Sony TV that is compatible
with the BRAVIA Sync features using the HDMI
cable, you can control the basic functions of the
player with the TV’s remote if the “Control for
HDMI” setting on the connected TV is set to
“On.” Refer to the instruction manual supplied
with the TV.
About the BRAVIA Sync
features (for HDMI connections
only)
By connecting Sony components that are
compatible with the “Control for HDMI”
function with an HDMI cable (not supplied),
operation is simplified as below:
• One-Touch Play
With one touch of the following buttons, the
connected TV turns on and the input
selector on the TV is switched to the player
automatically.
b
Depending on the connected component, the
“Control for HDMI” function may not work. Refer
to the instruction manual supplied with the
component.
– [/1
– HOME: The home menu appears
– N: Playback starts automatically
• System Power-Off
When you turn off the TV using TV [/1 or
the power button on the TV’s remote, the
player and HDMI-compatible components
turn off automatically.
• Theatre
When you press THEATRE, the player
automatically switches to the optimum
video mode for watching movies. When
connected with a Sony AV amplifier
(receiver) using the HDMI cable, the
speaker output also switches automatically.
When connected with a Theatre Mode-
compatible TV using the HDMI cable, the
TV’s video mode switches to Theatre
Mode. Press the button again to return to the
original setting.
18
Connecting to component video jacks (Y, PB/CB, PR/CR)
Connect the COMPONENT VIDEO OUT jacks of the player and your TV using a component
video cable. You can enjoy high-quality pictures.
Be sure to connect to the LINE OUT (R-AUDIO-L) jacks using the audio/video cable.
Blu-ray Disc/DVD player
(green)
(blue)
(red)
(red)
(white)
Component video
cable (not supplied)
Audio/video cable*
(red)
(white)
(green)
(blue)
(red)
Match the colour of the plug to
that of the jack.
Match the colour of the plug to
that of the jack.
TV
: Signal flow
b
When you connect the player and TV using a
component video cable, disconnect the video plug
(yellow) of the audio/video cable.
,continued
19
Connecting to audio/video or S VIDEO jacks
Connect the LINE OUT (VIDEO, R-AUDIO-L) jacks of the player and your TV using the
audio/video cable. You can enjoy standard quality pictures and sound.
Blu-ray Disc/DVD player
(yellow)
(red)
(white)
or
S-video cable
(not supplied)
Audio/video cable*
(yellow)
(red)
(white)
Match the colour of the plug
to that of the jack.
TV
: Signal flow
b
When you connect the player and TV using an S-
video cable, disconnect the video plug (yellow) of
the audio/video cable.
20
Step 2: Connecting to Your AV Amplifier (Receiver)
About audio/HDMI OUT jacks
The player has the following audio jacks. Connect the player to your AV amplifier (receiver)
according to the input jacks on your AV amplifier (receiver).
Jack type
Hookup
Digital
Analogue
z
For correct speaker location, refer to the instruction
manual supplied with the connected components.
,continued
21
Connecting to an HDMI jack
If your AV amplifier (receiver) has an HDMI input, use this connection. You can enjoy higher
quality sound from the connected AV amplifier (receiver).
To enjoy 7.1 channel sound, use a High Speed HDMI cable.
If you connect a Sony AV amplifier (receiver) that is compatible with the “Control for HDMI”
Blu-ray Disc/DVD player
HDMI cable (not supplied)
AV amplifier (receiver)
HDMI cable (not supplied)
TV
1 Connect the HDMI OUT jack of the
player and your AV amplifier
(receiver).
2 Set “BD Audio Setting” to “Direct” in
To enjoy the secondary audio
(commentary), set “BD Audio Setting”
to “Mix.”
22
z
b
Check the following settings:
– “Audio Output Priority” is set to “HDMI” in the
– “Audio (HDMI)” is set to “Auto” in the “Audio
Not all HDMI-compatible AV amplifiers
(receivers) accept 8ch Linear PCM signals. Refer as
well to instruction manual supplied with the
connected AV amplifier (receiver).
Connecting to digital jacks (OPTICAL/COAXIAL)
*1
*2
If your AV amplifier (receiver) has a Dolby Digital, Dolby Pro Logic, or DTS decoder and
a digital input jack, you can enjoy Dolby Digital (5.1ch), Dolby Pro Logic (4.0ch), or DTS
(5.1ch) surround effects.
Blu-ray Disc/DVD player
or
Optical digital cable
(not supplied)
Coaxial digital cable
(not supplied)
AV amplifier (receiver)
: Signal flow
1 Connect the digital jack of the player
and your AV amplifier (receiver).
3 Make the appropriate settings in
“Dolby Digital” and “DTS” under the
Otherwise, no sound or a loud noise will
come from your speakers.
2 Set “Audio Output Priority” to
“Coaxial/Optical” in the “Audio
,continued
23
*1
*2
Connecting to 7.1 channel jacks
If your AV amplifier (receiver) has 7.1 channel inputs, you can enjoy multi channel surround
sound.
Blu-ray Disc/DVD player
Stereo audio cable
(not supplied)
Stereo audio cable
(not supplied)
Monaural audio
cable (not supplied)
Monaural audio
cable (not supplied)
Stereo audio cable
(not supplied)
AV amplifier (receiver)
: Signal flow
24
1 Connect the 7.1 channel jacks of the
player and your AV amplifier
(receiver).
3 Make the appropriate settings in
“Speaker Settings” under the “Audio
2 Set “Audio Output Priority” to “Multi
Channel Analogue” in the “Audio
Connecting to audio L/R jacks
If your AV amplifier (receiver) only has L and R audio input jacks, use this connection.
Blu-ray Disc/DVD player
(red)
(white)
Audio/video cable*
(red)
(white)
Match the colour of the plug
to that of the jack.
AV amplifier (receiver)
: Signal flow
25
b
• Insert the external memory straight. If you force
the external memory into the slot, this will cause
damage to both the external memory and the
player.
• Keep the external memory away from small
children to prevent them from accidentally
swallowing the external memory.
• Do not apply too much pressure to the external
memory in the slot, as it may cause a malfunction.
• We recommend use of the Sony USM2GL
available as of April 2009.
• Other USB flash devices may support this
function. However we cannot guarantee
compatibility with all USB flash memories.
• When inserting a USB flash memory, check the
insertion direction before inserting it.
• Depending on the USB flash memory, it may
stick out from the EXT slot. Do not force into the
slot or apply pressure to the protruding portion of
the USB flash memory.
Step 3: Inserting the
External Memory
To enjoy additional content (such as
BONUSVIEW/BD-LIVE) on certain Blu-ray
Disc titles, you will need to use external
memory (not supplied).
Insert the external memory device (1 GB or
larger USB flash memory, such as Sony
USM2GL, USM4GL, or USM1GH) into the
EXT slot as your local storage.
b
The BD-LIVE function will not be available even if
you insert the external memory in the USB jack on
the front panel.
Insert the external memory into the EXT
slot as far as it will go.
Check that the EXT indicator lights up in the
front panel display when turning the player
on.
• Do not connect anything other than a USB flash
memory to the EXT slot.
• To avoid data corruption or damage to the
external memory, turn the player off when
inserting or removing the external memory.
• When the EXT indicator does not light up, turn
the player off, remove and re-insert the external
memory, then turn the player on again.
• Do not insert the external memory that contains
photo or music files to avoid corrupting the
external memory data.
Rear of the player
Sony USM2GL
(not supplied)
• When re-formatting the USB flash memory, use
FAT16 or FAT32 format.
With the logo side up
To remove the external memory
1
2
Press [/1 to turn the player off.
Pull out the external memory from the
EXT slot.
26
Step 4: Connecting to the Network
Connect the player to your Internet source. Select the connecting method, connecting via a
1 Connect the player to your Internet source via a wireless LAN router.
Blu-ray Disc/DVD player
Wireless LAN router
(access point)
ADSL modem/
Cable modem
PC
Internet
LAN cable (not supplied)
Refer also to the instruction manual supplied with the wireless LAN router.
2 Check your connection environment on your PC and make the appropriate settings.
Wireless LAN router (access point)
Settings
Security Setting
Type
Security is set.
Check the security setting of your
connected network on your PC screen.
Wi-Fi Protected
See “Setting wireless LAN
*2
*1
Example: Windows XP
NotWi-Fi Protected See “Setting wireless LAN
Setup-compatible
A message with the lock icon indicates
that security is enabled.
*3
No security is set.
Any type
See “Setting wireless LAN
Check the security setting of your
connected network on your PC screen.
Example: Windows XP
*1
A message indicates that no security is
set.
*1
When you use other operating systems, refer to the Help of your PC.
You can set the network settings easily with one press of the WPS button on the wireless LAN router
(access point). Wi-Fi Protected Setup-compatible wireless LAN routers (access points) may have the
*2
logo (“
”).
*3
,continued
27
To connect a broadband router directly
To update the player’s software using the
network
1
Connect the LAN (100) terminal of the
player to a broadband router.
Blu-ray Disc/DVD player
b
Do not connect a phone line to the LAN (100)
terminal, as it may cause a malfunction.
To enjoy the BD-LIVE function
b
To enjoy the BD-LIVE function, we recommend
using an Internet connection with an effective speed
of 1 Mbps or greater, depending on your connection
environment and network condition.
LAN cable
(not supplied)
Broadband
router
To PC
LAN cable
(not supplied)
ADSL modem/
Cable modem
Internet
2
Make the appropriate settings in
“Internet Settings” under the “Network
b
• Depending on the modem or router, the type of
LAN cable, straight or crossing, differs. For
details on the LAN cables, refer to the instruction
manual supplied with the modem or router.
• Do not connect the LAN terminal of the player to
the LAN terminal of the PC.
z
Using a shielded interface cable (LAN cable),
straight or crossing, is recommended.
28
Step 5: Connecting the
Mains Lead
Step 6: Preparing the
Remote
After all of the other connections are
complete, connect the supplied mains lead to
the AC IN terminal of the player. Then plug
the player and TV mains leads (AC power
cords) into the mains.
You can control the player using the supplied
remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries
to the markings inside the battery
compartment. When using the remote, point
it at the remote sensor
on the player
to AC IN
1
2
b
to mains
• Use the batteries correctly to avoid possible
leakage and corrosion. Should leakage occur, do
not touch the liquid with bare hands. Observe the
following:
– Do not use a new battery with an old battery, or
batteries of different manufacturers.
– Do not attempt to recharge the batteries.
– If you do not intend to use the remote for an
extended period of time, remove the batteries.
– If battery leakage occurs, wipe out any liquid
inside the battery compartment, and insert new
batteries.
• Do not expose the remote sensor (marked
the front panel) to strong light, such as direct
on
sunlight or a lighting apparatus. The player may
not respond to the remote.
,continued
29
Controlling TVs with the
remote
1
While holding down TV [/1, enter the
TV’s manufacturer code using the
number buttons.
For instance, to enter “09,” press “0” then
“9.”
You can control the volume, input source,
and power switch of your Sony TV with the
supplied remote.
Code numbers of controllable TVs
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
b
When you replace the batteries of the remote, the
code number may be reset to the default setting. Set
the appropriate code number again.
Manufacturer
Sony
Code number
01 (default)
TV [/1
Grundig
Hitachi
11
Number
buttons
24
ITT
15, 16
JVC
33
LG/Goldstar
Loewe
76
45
Nokia
15, 16, 69, 73
17, 49
Panasonic
Philips
06, 07, 08, 72
12, 13, 74
22, 23, 71
25
Saba
t
Samsung
Sanyo
TV 2 +/–
Sharp
29
Available buttons
Telefunken
Thomson
Toshiba
36
Depending on the connected unit, you may not
be able to control your TV with some or all of
the buttons (TV [/1, t, or TV 2 +/–).
43, 75
38
2
Release TV [/1.
Buttons
Operations
TV [/1
Turns your TV on or off.
t (input select) Switches your TV’s input
source between the TV
and other input sources.
TV 2 (TV
volume) +/–
Adjusts the volume of
your TV.
To control other TVs with the remote
You can control the volume, input source,
and power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
b
If you enter a new code number, the code number
previously entered will be erased.
30
4 Select a language for the on-screen
displays using M/m, and press
ENTER.
Step 7: Easy Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
player. If you do not complete Easy Setup, it
will appear each time you turn on your
player.
Make the settings below in the following
order.
When turned on for the first time
Wait for a short while before the player
turns on and starts Easy Setup.
The initial settings message appears.
5 Select “Start,” and press ENTER.
[/1
TV [/1
6 Select the cable type used to connect
the player and your TV, and press
ENTER.
</M/m/,,
ENTER
HOME
1 Turn on the TV.
2 Press [/1 to turn on the player.
The player turns on after a moment.
3 Switch the input selector on your TV so
that the signal from the player
appears on your TV screen.
The display for OSD language selection
appears.
b
When connecting the HDMI OUT jack and
other video output jacks at the same time,
select “Component Video.”
• If the display for OSD language
selection does not appear
Press HOME, and select “Easy Setup”
select “Start,” and press ENTER.
,continued
31
2Select “Finish,” and press ENTER.
The display asks for confirmation.
7 Make the appropriate settings
depending on the cables connected to
your TV.
3Select “OK” or “Cancel,” and press
ENTER.
When you select “HDMI” in step 6
1Select “Start,” and press ENTER.
The test screen appears for about 30
seconds.
Example: when the video output
resolution is set to 1080i
When you select “Video or S Video” in
step 6
Select an aspect ratio that matches your
TV, and press ENTER.
Select “16:9” when connecting to a wide-
screen TV or a TV with a wide mode
function.
Current video output resolution setting
Select “4:3” when connecting to a 4:3
screen TV without a wide mode function.
b
If no picture appears, press RETURN to
Video.”
8 Select “Allow” to allow Internet
connections from BD contents, and
press ENTER.
2Select “Finish,” and press ENTER.
The display asks for confirmation.
3Select “OK” or “Cancel,” and press
ENTER.
When you select “Component Video” in
step 6
1Select a video output resolution for
the connected TV, and press ENTER.
For details about the video output
Select “Do not allow” to not allow
Internet connections from BD contents.
9 Set “Quick Start Mode” to “On” or
“Off,” and press ENTER.
The test screen appears for about 30
seconds. For the test screen, see
(above).
For details about “Quick Start Mode,”
b
If no picture appears, press RETURN to
return to the previous screen, and change
the resolution setting.
32
10 Select “Finish,” and press ENTER.
Step 8: Setting Wireless
LAN
The network settings differ depending on
your connection method or the wireless LAN
router (access point). See “Step 4:
check the appropriate settings.
z
• You can reset settings to their factory settings
• You can run “Easy Setup” again from “Easy
Setting wireless LAN
(Automatic registration (WPS))
Use the following procedure when you
connect the player to a Wi-Fi Protected
Setup-compatible wireless LAN router
(access point) with security set.
b
The wireless settings of the wireless LAN router
(access point) may change automatically if you use
the Wi-Fi Protected Setup function before adjusting
the settings of the wireless LAN router (access
point). In this case, you may need to change the
wireless settings of your PC accordingly. For
details, refer to the instruction manual supplied
with the wireless LAN router (access point).
27.
2 Press HOME.
3 Select
(Setup) using </,.
4 Select “Internet Settings” in “Network
Settings,” and press ENTER.
5 Select “Start,” and press ENTER.
6 Select “Wireless,” and press ENTER.
7 Select “Automatic registration
(WPS),” and press ENTER.
8 Check the position of the WPS button
on the wireless LAN router (access
point) and how to press it.
The position of the WPS button and how
to press it differ depending on the
wireless LAN router (access point). For
details, refer to the instruction manual
supplied with the wireless LAN router
(access point).
,continued
33
9 Select “Start,” and press ENTER.
14 Check the settings, and select
“Finish,” then press ENTER.
The message “Settings are complete.”
appears.
10 Press and hold the WPS button on the
wireless LAN router (access point)
until the light on the wireless LAN
router (access point) starts to blink.
Press the WPS button within 2 minutes
If an error message appears in the
network diagnostic results, check the
message. Then, set the network settings
again or perform the network diagnostic
again.
The message “Access point registration
is complete.” appears.
Example: when the wireless LAN router
(access point) has a WPS button
Setting wireless LAN (Access
point scan)
Use the following procedure when you
connect the player to a wireless LAN router
(access point) that is Wi-Fi Protected Setup-
compatible without security set or not Wi-Fi
Protected Setup-compatible.
Connecting to the Network” on page
27.
b
• When the player does not detect a wireless
LAN router (access point), repeat from step
9 after a while.
2 Check the SSID and the security key on
the setting screen of your wireless
LAN router (access point).
• In some cases, depending on the security of
the wireless LAN router (access point), it
may not be possible to use the Wi-Fi
Protected Setup function. In this case, follow
the on-screen instructions, and change the
settings of the wireless LAN router (access
point).
For information about how to use the
setting screen of the wireless LAN router
(access point), visit the following
website or consult the manufacturer of
the wireless LAN router (access point):
– Security type: For details on the type of
security that can be used on this player,
11 Select “Do not use,” and press
ENTER.
If your Internet service provider has a
specific proxy server setting, select
“Use.” For details, see “Network
– Security key: The wireless LAN router
(access point) has a WEP or WPA key
according to the selected security type.
12 Select “Perform” using M/m, and
press ENTER.
z
The network diagnostic starts.
Results are displayed after the player
finishes the network diagnostic.
If an error message appears, follow the
on-screen instructions.
For further details, visit the following
website and check the FAQ contents:
WEP or WPA key may be displayed as
“passphrase” or “network key” depending on
the wireless LAN router (access point).
3 Press HOME.
4 Select
(Setup) using </,.
5 Select“Internet Settings” in “Network
Settings,” and press ENTER.
13 Select “Finish,” and press ENTER.
6 Select “Start,” and press ENTER.
34
7 Select “Wireless,” and press ENTER. 15 Select “Do not use,” and press
ENTER.
8 Select “Access point scan,” and press
If your Internet service provider has a
ENTER.
specific proxy server setting, select
The player will detect nearby access
“Use.” For details, see “Network
points and display the SSID (Service Set
Identifier) and security settings.
16 Select “Perform” using M/m, and
9 Select the access point with the SSID
press ENTER.
The network diagnostic starts.
Results are displayed after the player
ENTER.
When your wireless LAN router (access
finishes the network diagnostic.
point) is not detected, press RETURN
If an error message appears, follow the
on-screen instructions.
router is still not detected, press
For further details, visit the following
RETURN to select “Manual registration”
website and check the FAQ contents:
17 Select “Finish,” and press ENTER.
10 Check the security, and press ENTER.
18 Check the settings, and select
The display for entering WEP or WPA
“Finish,” then press ENTER.
The message “Settings are complete.”
appears.
key appears.
z
If an error message appears in the
network diagnostic results, check the
message and set the network settings
again.
The appropriate security is automatically
selected. You do not normally need to change
the security.
11 Press ENTER to input the WEP or WPA
key.
b
Make sure the WEP or WPA key is correctly
characters on the screen.
12 Press ,.
b
The WEP or WPA key is displayed as 8
asterisks no matter how many characters you
enter.
13 Select “Auto Acquisition,” and press
ENTER.
If you use a static IP address, select
“Manual.” For details, see “Network
14 Select “Auto,” and press ENTER.
If you specify a DNS server, select
“Manual.” For details, see “Network
35
Playing BDs/DVDs
BD
DVD
Z
Number
buttons
</M/m/,,
ENTER
OPTIONS
HOME
N
X
x
1 Switch the input selector on your TV so
that the signal from the player
appears on your TV screen.
Playback
2 Press Z, and place a disc on the disc
tray.
Playing side facing down
3 Press Z to close the disc tray.
• When you insert a commercially
available BD-ROM or DVD VIDEO,
playback automatically starts
depending on the disc.
36
b
4 Press HOME.
• The point where you stopped playing is cleared
from memory when:
5 Select “Video” using </,.
– you open the disc tray,
– you play another title,
– you change the settings on the player, or
– you remove the external memory (for BD-
ROMs).
6 Select using M/m, and press Nor
ENTER.
• The player may not resume playback depending
on the disc or stop point.
To play restricted BDs or DVDs (Parental
Control)
When you play a restricted BD, change the
“BD Parental Control” setting in the “BD/
When you play a restricted DVD, the display
for entering your password appears on the
screen.
Enter your four-digit password using the
number buttons, and press ENTER.
Playback starts.
For commercially available BD-ROMs
or DVD VIDEOs, playback starts.
For BDs or DVDs recorded on other
equipment, the title list appears. Select a
title using M/m, and press N or
ENTER.
Playback starts.
To register or change the password, see
To stop playback
Press x.
To play restricted BD-REs or BD-Rs (Disc
Lock)
When you play a BD-RE or BD-R restricted
by the Disc Lock function, the display for
entering your password appears on the
screen.
To pause playback
Press X.
z
In the title list, “PL” (Playlist) is displayed next to
the name of titles that are created and edited from
their originals.
1
Enter the four-digit password that has
been registered when creating the disc
using the number buttons, and press
ENTER.
b
• Depending on the disc you may not be able to do
some of the playback operations. Refer to the
instruction manual supplied with the disc.
• Depending on BDs or DVDs recorded on other
equipment, title lists or title names may not be
displayed.
2
Select a title, and press N or ENTER.
Playback starts.
One-Touch Play (for HDMI connection
only)
Press N.
The player and the connected TV turn on and
the input selector on the TV is switched to the
player, then playback starts automatically.
To resume playback from the point where
you stopped (Resume Play)
After stopping playback, select
m, and press N or ENTER.
The player resumes playback from the point
using M/
where you pressed x.
b
• When using the HDMI connection, there may be
a delay before the playback picture appears on the
screen, and the beginning portion of the playback
picture may not be displayed.
• To use the One-Touch Play function, set “Control
for HDMI” to “On” (default) in the “System
To start from the beginning, press OPTIONS
to select “Play from start,” and press ENTER.
Playback starts from the beginning of the
title.
,continued
37
Available OPTIONS
Using the BD’s or DVD’s menu
1
Press OPTIONS.
The options menu appears.
BD DVD
2
Select an item using M/m, and press
ENTER.
The available items differ depending on
the disc type or player situation.
To display Top Menu
When you play a BD or DVD, you can
display the Top Menu.
1
2
Press TOP MENU during playback.
The Top Menu appears.
Items
Headphones Selects the headphones
Details
Select an item using </M/m/,.
Video Settings Adjusts settings for
To display Pop-up Menus
Some BD-ROMs contain Pop-up Menus that
appear without interrupting playback.
Audio Settings Adjusts settings for
sound (page 42).
1
2
Press POP UP/MENU during playback.
The Pop-up Menu appears.
Title List
Play
Displays the title list.
Select an item using </M/m/,, colour
buttons, or the number buttons, and
follow the on-screen instructions.
Plays the title from the
point where you pressed
x.
Play from start Plays the title from the
beginning.
Enjoying BONUSVIEW/BD-LIVE
Top Menu
Displays the disc’s Top
BD
Menu/Popup Displays the BD-
Some BD-ROMs with “BD-LIVE Logo*”
have bonus contents and other data that can
be downloaded to the external memory (local
storage) for enjoyment.
Menu
ROM’s Pop-up Menu or
Stop
Stops playback.
Title Search
Searches for a title and
starts playback from the
beginning (page 40).
*
1 If a disc is inserted, remove the disc
from the player.
Chapter
Search
Searches for a chapter
and starts playback
from the beginning
2 Turn the player off.
3 Insert the external memory (not
supplied) into the EXT slot on the rear
of the player.
The external memory is used as the local
storage.
Make sure that the external memory is
properly inserted into the player
4 Connect the player to a network
5 Turn the player on.
6 Set “BD Internet Connection” to
“Allow” in the “BD/DVD Viewing
38
7 Insert a BD-ROM with BONUSVIEW/
BD-LIVE.
Searching for a scene quickly
(Scene Search)
The operation method differs depending
on the disc. Refer to the instruction
manual supplied with the disc.
BD DVD
You can move quickly between scenes within
the title currently being played back.
To delete data in the external memory
You can delete unnecessary data.
1 Press SCENE SEARCH during playback
or in pause mode.
1
If a disc is inserted, remove the disc from
the player.
Playback pauses and a bar with a scene
indicator appears at the bottom of the
screen.
2
3
4
Press HOME.
Select “Video” using </,.
2 Move the scene indicator to the scene
you are searching for using </, or
m/M.
Select “BD Data” using M/m, and press
ENTER.
5
Select the disc name, and press
OPTIONS.
Scene indicator
6
7
Select “Erase,” and press ENTER.
Select “OK,” and press ENTER.
The data of the selected disc will be
deleted.
z
• To delete all data in the external memory at once,
The current point
The scene indicator on the bar is
displayed around the playing point.
b
• The downloaded contents may not be displayed
depending on the disc, if you delete the Shared
Cache Data.
3 Release the button at the point you
want to watch.
• Depending on the BD-ROM, the disc name may
not be displayed.
The scene at which you released the
button is displayed in pause mode.
To search for a scene again, move the
scene indicator using </, or m/
M.
4 Press SCENE SEARCH, ENTER, N, or
X.
Playback starts.
To cancel Scene Search mode
Press SCENE SEARCH, ENTER, N, or X.
Playback starts from the point you pressed
the button.
,continued
39
b
• The Scene Search function is available for titles
longer than 100 seconds and shorter than 100
hours.
Displaying the playing time and
play information
• The Scene Search function may not be available
depending on the disc.
DVD
BD
You can check the title information,
including the video transmission rate, etc.
Searching for a Title/Chapter
Press DISPLAY.
The displayed information differs depending
on the disc type and player status.
BD
DVD
You can search for a chapter if the title
contains chapter marks.
Example: when playing a BD-ROM
1 Press OPTIONS during playback or in
pause mode.
The options menu appears.
2 Select a search method using M/m,
and press ENTER.
“Title Search” (for BD-ROMs/DVD
VIDEOs)
“Chapter Search”
The display for entering the number
appears.
Example: Chapter Search
A The current selected angle
B Title number or name
C The currently selected audio setting
D Available functions (
audio/ subtitle)
angle/
E Playback information
Displays Disc type/Play mode/Video
codec/Bit rate/Playing status bar/
Playing time (Remaining time*)
3 Enter the number of the title or chapter
using the number buttons.
If you make a mistake, press CLEAR,
and re-enter another number.
F Output resolution/Video frequency
* Displayed when you press TIME repeatedly.
4 Press ENTER.
After a while, the player starts playback
from the selected number.
z
• You can also check the playback information in
• Press SUBTITLE, AUDIO, or ANGLE to switch
each setting.
40
z
The “HD Reality Enhancer (HDMI)” settings are
individually set during video and photo playback.
Adjusting pictures and sound
for videos
b
DVD
BD
• Set the picture setting of your TV to ‘Standard’
before changing the “Picture Quality Mode”
settings.
To adjust the picture
• “Video Settings” is not available when the
• Depending on the disc or the scene being played,
“FNR,” “BNR” or “MNR” effects may be hard to
discern.
1
2
Press OPTIONS during playback.
The options menu appears.
Select “Video Settings” using M/m, and
press ENTER.
The “Video Settings” screen appears.
“Video Equaliser” elements
1
2
and press ENTER.
Select an item, and press ENTER.
Items
Details
Contrast
Changes the contrast.
((weak) –3 ~ 0
~ 3 (strong))
3
Select an item using M/m, and press
ENTER.
The default settings are underlined.
Brightness
((dark) –3 ~ 0 brightness.
~ 3 (bright))
Changes the overall
Items
Details
Chroma
Changes overall colour
((light) –3 ~ 0 level.
~ 3 (deep))
PictureQuality Selects the picture
Mode
settings for different
(Standard/
Brighter Room
Theatre Room
Memory)
lighting environments.
Hue ((red) –3 Changes overall colour
/
/
~ 0 ~ 3
balance.
(green))
Gamma
Adjusts the picture
balance between light
and dark areas.
Video
Equaliser
This setting is selectable
when “Picture Quality
Mode” is set to
“HD Reality Enhancer (HDMI)” elements
1
2
Select “HD Reality Enhancer (HDMI)”
HD Reality
Enhancer
(HDMI)
This setting is available
only when video signals
are output from the
HDMI OUT jack (see
Select an item, and press ENTER.
Items
Details
Enhance
(–3 ~ 0 ~ 3)
Enhances the scene
picture outline pixel by
pixel.
NR (Noise
Reduction)
Reduces the noise in the
picture (see ““NR”
Smoothing
(Off/Standard/ on flat parts of the
High)
Smooths the gradation
picture.
4
Select or adjust the settings using </M/
m/,, and press ENTER.
To adjust any other items, repeat steps 3
FGR (0 ~ 3)
Reduces film grain.
,continued
41
b
“NR” elements
• The “Audio Filter” function does not work for
digital audio signals output from the HDMI OUT/
DIGITAL OUT (OPTICAL/COAXIAL)/
PHONES jacks.
• There may be little effect by changing the “Audio
Filter” setting depending on the disc or playback
environment.
1
2
ENTER.
Select an item, and press ENTER.
Items
Details
FNR
(Off/Auto)
Reduces random noise
appearing in the picture.
To adjust the audio characteristics for
headphones
BNR
(Off/Auto)
Reduces mosaic-like
block noise in the
picture.
1
2
Connect your headphones.
MNR
(Off/Auto)
Reduces minor noise
around the picture
outlines (mosquito
noise).
Set “Audio Output Priority” to
“Headphones” in the “Audio Settings”
3
4
5
6
Press OPTIONS during playback.
The options menu appears.
To adjust the audio characteristics
Select “Headphones Type” using M/m,
and press ENTER.
1
Press OPTIONS during playback.
The options menu appears.
Select “Overhead Type” or “Inner Ear
Type” using M/m, and press ENTER.
2
Select “Audio Settings” using M/m, and
press ENTER.
The “Audio Settings” screen appears.
Press SURROUND.
“Surround (Multi)” appears on the
screen, and multi channel surround
sound is output.
Press PHONE LEVEL +/– during
playback to adjust the headphone
volume.
The headphone volume bar appears on
the screen when pressing PHONE
LEVEL +/–.
3
Select an item using M/m, and press
ENTER.
The default settings are underlined.
b
• When “Audio Output Priority” is set to other than
“Headphones” in the “Audio Settings” setup,
“Surround (2ch)” will appear on the screen when
SURROUND is pressed. To enjoy higher quality
surround sound, set “Audio Output Priority” to
“Headphones” in the “Audio Settings” setup
• When your headphones are not in use, set “Audio
Output Priority” to other than “Headphones” in
“Speaker Settings” become invalid and the
recorded sound is output from the MULTI
CHANNEL OUTPUT jacks as is.
Items
Details
AV SYNC
(short) 0 ~
120 msec
(long)
Adjuststhe gap between
picture and sound, by
delaying the sound
output in relation to the
picture output (0 to
120 milliseconds).
Audio Filter
(for analogue
audio signals
only)
• Sharp: Provides a
wide frequency range
and spatial feeling.
Normally select this.
• Slow: Provides
smooth and warm
sound.
• Do not use headphones at high volume, as it may
cause hearing damage.
• Do not connect anything other than headphones
to the PHONES jack, as it may cause a
malfunction.
4
Select or adjust the settings using </
,, and press ENTER.
To adjust any other items, repeat steps 3
and 4.
42
Available OPTIONS
Playing Music CDs and
MP3 Audio Tracks
1
Press OPTIONS.
The options menu appears.
2
Select an item using M/m, and press
ENTER.
The available items differ depending on
the situation.
*1
*2
*3
DATA BD
DATA DVD
DATA CD
CD
*1
*2
BD-REs/BD-Rs containing MP3 audio tracks
DVD-ROMs and DVD+RWs/DVD+Rs/DVD-
RWs/DVD-Rs containing MP3 audio tracks
CD-ROMs and CD-RWs/CD-Rs containing
MP3 audio tracks
Items
Details
*3
Headphones Selects the headphones
Type
Play
type (page 42).
Plays the selected track.
1 Insert a music CD.
Play from start Plays the current track
from the beginning
The Music Player screen appears.
2 Press N.
(music CDs only).
Playback starts.
Stop
Stops playing the track.
Various music playback operations
Buttons
Operations
N
Starts or re-starts playback.
Resumes playback from the
point where you pressed x
(except MP3 audio tracks).
x
Stops playback.
Pauses playback.
X
To select a music CD track
./>
Skips to the beginning of the
current or next track. To go
to the previous track press
. twice.
1
2
3
Press HOME.
Select
(Music) using </,.
Select , and press ENTER.
The music list appears.
m/M
TIME
Fast reverses/fast forwards
when pressed during
playback.
4
Select a track using M/m, and press N
or ENTER.
Switches time information
on the screen and the front
To select an MP3 album or track
AUDIO
Selects stereo or monaural
tracks (except MP3 audio
tracks).
1
Insert a disc containing MP3 audio
tracks.
2
3
Select
(Music) using </,.
SURROUND Turns headphone surround
Select , and press ENTER.
The list of albums and tracks appears.
To play an entire disc, press N instead
of ENTER.
mode on or off (page 42).
PHONE
LEVEL +/–
Adjusts the headphone
volume when headphones
are connected and a disc is
4
Select an album or track using M/m, and
press ENTER.
When you select an album, select a track
in the album using M/m, and press N or
ENTER.
To play an entire album, select the
album, and press N.
,continued
43
b
• The point where you stopped playing (resume
point) is cleared from memory when:
– you open the disc tray, or
– you turn off the player.
• The player can play the following MP3 audio
tracks.
– Format: MPEG-1 Audio Layer 3
– Sampling frequency: 32 kHz/44.1 kHz/48 kHz
– Number of channels: 2ch
– Bit rate: 64 kbps to 320 kbps
– File size: 1 GB Max
Playing Photo Files
*1
*2
*3
DATA BD
DATA DVD
DATA CD
*1
*2
BD-REs/BD-Rs containing JPEG image files
DVD-ROMs and DVD+RWs/DVD+Rs/DVD-
RWs/DVD-Rs containing JPEG image files
CD-ROMs and CD-RWs/CD-Rs containing
JPEG image files
*3
– Playing time: 1 sec to 9,000 sec
– Extension: .mp3/.MP3
– Number of tracks: Up to 500 tracks (incl.
albums if any)
• The player does not recognise the following MP3
albums/tracks.
You can play photo files on a disc.
To play photo files on the connected USB
To play photo files on the DLNA server, see
– MP3 albums/tracks with extremely long names
– MP3 albums containing MP3 audio tracks with
extremely long names
– MP3 albums in the 5th tree and MP3 albums/
tracks in the 6th tree or lower
1 Press HOME.
2 Select
(Photo) using </,.
• The player cannot play the following MP3
albums/tracks.
– MP3 audio tracks recorded in monaural
– MP3 albums/tracks recorded on BD-Rs in any
format other than UDF (Universal Disk Format)
2.6
– MP3 albums/tracks recorded on BD-REs in any
format other than UDF (Universal Disk Format)
2.5
• The elapsed time of some MP3 audio tracks may
not be displayed correctly.
3 Select , and press ENTER.
The file list or folder list appears.
4 Select a file or folder using M/m, and
press ENTER.
When you select a folder, select a file in
the folder using M/m, and press ENTER.
The selected photo file is displayed.
• To play a slideshow, press N.
44
Available OPTIONS during playback
Various photo playback operations
1
Press OPTIONS during playback.
The options menu appears.
Buttons
Operations
x
Stops a slideshow.
2
Select an item using M/m, and press
ENTER.
The available items differ depending on
the situation.
RETURN
X
Pauses a slideshow.
./>
</,
Displays the previous or
next photo.
Items
Details
DISPLAY
Displays the file
information.
HD Reality
Enhancer
This setting is available
only when video signals
are output from the
HDMI OUT jack (see
b
• When you attempt to play the following photo
files, the mark appears on the screen and they
cannot be played.
– photo files larger than 8,192 pixels (width or
height)
– photo files smaller than 15 pixels (width or
height)
– photo files exceeding 32 MB
– photo files with extreme aspect ratios (greater
than 50:1 or 1:50)
Slideshow
Speed
Changes the slideshow
speed.
• Fast
• Normal
• Slow
– photo files in Progressive JPEG format
– photo files that have a “.jpeg” or “.jpg”
extension, but not in JPEG format
– photo files that have an extremely long name
• The following photo files cannot be played.
– photo files recorded on BD-Rs in any format
other than UDF (Universal Disk Format) 2.6
– photo files recorded on BD-REs in any format
other than UDF (Universal Disk Format) 2.5
• The following photo files or folders cannot be
displayed in the file list or folder list.
– photo files that have an extension other than
“.jpeg” or “.jpg”
Stop
Stops a slideshow.
Rotate Left
Rotates the photo
counterclockwise by 90
degrees.
Rotate Right
Rotates the photo
clockwise by 90
degrees.
“HD Reality Enhancer (HDMI)” elements
1
2
Select “HD Reality Enhancer (HDMI)”
– photo files that have an extremely long name
– photo folders in the 5th tree and photo files/
folders in the 6th tree or lower
Select an item, and press ENTER.
Items
Details
– 501th or more folders when the total number of
folders and files in a single tree exceeds 500
• Photo files edited on a PC may not be played.
• Thumbnail images of some photo files may not be
displayed.
Enhance
(–3 ~ 0 ~ 3)
Enhances the scene
picture outline pixel by
pixel.
Smoothing
(Off/Standard/ on flat parts of the
Smooths the gradation
• Large photo files may take some time to display
or to start a slideshow.
High)
picture.
FGR (0 ~ 3)
Reduces film grain.
z
The “HD Reality Enhancer (HDMI)” settings are
individually set during video and photo playback.
,continued
45
To view best quality images
If you have a Sony TV compatible with
“PhotoTV HD,” you can enjoy best quality
images by the following connection and
setting.
3 Select
(Photo) using </,.
1
2
Connect the player to the TV using an
HDMI cable (not supplied).
Set the TV’s video setting to [VIDEO-A]
mode.
For details on [VIDEO-A], refer to the
instruction manual supplied with the TV.
4 Select
(USB Device) using m, and
press ENTER.
The file list or folder list appears.
b
You can enjoy “PhotoTV HD” only when “HDMI
Resolution” of the player is set to “Auto,” “1080i,”
or “1080p” in the “Output Video Format” under the
5 Select a file or folder using M/m, and
press ENTER.
When you select a folder, select a file in
the folder using M/m, and press ENTER.
The selected photo file is displayed.
• To play a slideshow, press N.
Playing from a USB device
You can play photo files on the connected
USB device.
b
• Do not remove the USB device during operation.
Stop playback and turn off the file list and folder
list beforehand.
1 Connect the USB device to the USB
jack on the player.
• The player cannot play photo files on a USB
device if it is connected to the USB jack on the
rear panel of the player.
Refer to the instruction manual supplied
with the USB device before connecting.
Blu-ray Disc/DVD player
to USB jack
USB device
b
• Some USB devices may not work with this
player.
• The player can recognise:
– Mass Storage Class (MSC) devices that are
FAT-compatible and non-partitioned, and
– Still Image Capture Device (SICD) class
devices.
If the MSC devices are partitioned, the
player may not recognise the devices.
2 Press HOME.
46
Playing Photo Files via a
Network
You can play photo files on your home
server, such as a DLNA certified PC, by
connecting the player to the network of the
server.
Preparing for the server/player
Playing photo files on a DLNA
server
66.
2 Press HOME.
3 Select
(Photo) using </,.
4 Select a DLNA server using M/m, and
press ENTER.
The file list or folder list appears.
5 Select a file or folder using M/m, and
press ENTER.
When you select a folder, select a file in
the folder using M/m, and press ENTER.
The selected photo file is displayed.
• To play a slideshow, press N.
b
• The following photo files or folders cannot be
displayed in the file or folder list.
– Photo folders in the 10th tree and photo files/
folders in the 11th tree or lower
– Folder numbers 1,000 and above when the total
number of folders and files in a single tree
exceeds 999
• Some server names may not be displayed.
47
Using the Settings
Displays
Select
(Setup) on the home menu when
you need to change the settings of the player.
1 Press HOME.
2 Select
(Setup) using </,.
3 Select the setup category icon to
change using M/m, and press ENTER.
For details on setting options and setup
category icons, see “Setting list”
Example: Video Settings
Settings and
Adjustments
4 Set the options.
48
Setting list
You can setup the following options.
Network Update
Icon
Explanation
You can update and improve the functions of
the player. We recommend the network
update every 2 months or so.
Network Update (page 49)
Updates the software of the
player.
For information about update functions, visit
the following website:
Video Settings (page 50)
Makes the video settings
according to the type of
connecting jacks.
For customers in European countries
For customers in Australia
Audio Settings (page 54)
Makes the audio settings
according to the type of
connecting jacks.
1 Select “Network Update” using M/m,
and press ENTER.
BD/DVD Viewing Settings
Makes detailed settings for BD/
DVD playback.
The player connects to the network, and
the display asks for confirmation.
Photo Settings (page 61)
Makes the photo-related settings.
2 Select “OK” using </,, and press
ENTER.
The player starts downloading, then
updating the software automatically.
When updating finishes, “FINISH”
appears for 5 seconds in the front panel
display, then the player automatically
turns off.
System Settings (page 61)
Makes the player-related
settings.
Network Settings (page 63)
Makes detailed settings for
Internet and network.
3 Press [/1 to turn on the player.
The player starts up with the updated
software.
Easy Setup (page 67)
Re-runs the Easy Setup to make
the basic settings.
Resetting (page 68)
Resets the player to the factory
settings.
z
• The “VUP */9” counter (“*” indicates update
step) in the front panel display also shows
progress of the update.
• You can check the current software version by
selecting “System Information” in the “System
• The “Setup” settings remain after updating.
• The player informs you of newer software version
information when “Software Update
b
• Do not disconnect the mains lead or LAN cable
while downloading or updating software.
• Any operations, including opening the disc tray,
are not available while updating.
• Downloading times may differ depending on the
server provider or line status.
• When error messages on network connections
appear, check the network settings (see “Internet
,continued
49
To update the software using an update
disc
You can update and improve the functions of
the player using an update disc provided by
Sony dealer or local authorised Sony service
facility.
Video Settings
The default settings are underlined.
1
2
Insert the update disc.
The display asks for confirmation.
TV Type
Selects your TV type.
Select “OK,” and press ENTER.
Software update starts.
When updating finishes, “FINISH”
appears for 5 seconds in the front panel
display, then the disc tray automatically
opens.
16:9
4:3
Select this when connecting
to a wide-screen TV or a TV
with a wide mode function.
Select this when connecting
to a 4:3 screen TV without a
wide mode function.
3
4
Remove the disc.
The player automatically turns off.
Press [/1 to turn the player on.
The player starts up with the updated
software.
Screen Format
Selects the display configuration for a 4:3
screen picture on a 16:9 wide screen TV.
z
Original
Select this when connecting
to a TV with a wide mode
function. Displays a 4:3
screen picture in 16:9 aspect
ratio even on a wide-screen
TV.
• The “VUP */9” counter (“*” indicates update
step) in the front panel display also shows
progress of the update.
• You can check the current software version by
selecting “System Information” in the “System
• The “Setup” settings remain after updating.
• For information about other software update
methods, visit the following website or consult
your nearest Sony dealer or local authorised Sony
Service facility:
Fixed Aspect Changes the picture size to
Ratio
fit the screen size with the
original picture aspect ratio.
For customers in European countries
For customers in Australia
b
• Do not disconnect the mains lead while updating.
• Any operations, including opening the disc tray,
are not available while updating.
50
DVD Aspect Ratio
Output Video Format
Selects the display configuration for
playback of 16:9 screen pictures on a 4:3
screen TV (selectable when “TV Type” is set
to “4:3” and “Screen Format” is set to “Fixed
Aspect Ratio”).
Selects the jack type to output video signals
(“TV Connection Method”) and output
resolution(“HDMIResolution”/“Component
Resolution”).
1
2
Select “Output Video Format” in “Video
Settings,” and press ENTER.
Letter Box
Displays a wide picture with
black bands on the top and
bottom.
Select the jack type to output video
signals using M/m, and press ENTER.
Pan & Scan
Displays a full-height
picture on the entire screen,
with trimmed sides.
b
When connecting the HDMI OUT jack and
other video output jacks at the same time,
select “Component Video.”
Letter Box
TV Connection Method
HDMI
Outputs signals from
the HDMI OUT jack
according to the“HDMI
Resolution” setting
Pan & Scan
Component
Video
Outputs signals from
the COMPONENT
VIDEO OUT jacks
according to the
“Component
b
Depending on the DVD, “Letter Box” may be
selected automatically instead of “Pan & Scan” or
vice versa.
Resolution” setting
Video or
S Video
Outputs signals from
the LINE OUT VIDEO
or S VIDEO jack.
Cinema Conversion Mode
Sets the video conversion method for 480p/
576p, 720p, 1080i, or 1080p* signals from
the HDMI OUT jack or the COMPONENT
VIDEO OUT jacks.
3
(When you select “HDMI” or
“Component Video” only)
1Select the signal type for the HDMI
OUT jack or COMPONENT VIDEO
OUT jacks using M/m, and press
ENTER.
When you change the video output
resolution, the test screen appears for
about 30 seconds.
* HDMI only
Auto
Normally select this. The
player automatically detects
whether the material is
video-based or film-based,
and switches to the
appropriate conversion
method.
b
If no picture appears, press RETURN to
return to the previous screen, and change
the resolution setting.
Video
The conversion method
suited for video-based
material will always be
selected regardless of the
material.
2Select “Finish,” and press ENTER.
The display asks for confirmation.
,continued
51
3Select “OK” or “Cancel,” and press
ENTER.
Follow the on-screen instructions.
BD-ROM 1080/24p Output
Sets to output 1920 × 1080p/24 Hz video
signals when playing film-based materials on
BD-ROMs (720p/24 Hz or 1080p/24 Hz).
1920 × 1080p/24 Hz video signals can be
output when all of the following conditions
are met.
– You connect a 1080/24p-compatible TV
using the HDMI OUT jack,
– “Output Video Format” is set to “HDMI,”
and
The HD indicator lights up when
outputting 720p/1080i/1080p video
signals.
b
• If no picture appears after changing the
“Output Video Format” settings, hold down
x on the player for more than 10 seconds.
The video output resolution will be reset to
the lowest resolution.
– “HDMI Resolution” is set to “Auto” or
“1080p.”
• When connecting the HDMI OUT jack and
other video output jacks at the same time,
video signals may not output from the jacks,
other than from the HDMI OUT jack, when
When connecting other equipment at the
same time, press RETURN to return to step
2 and change the “TV Connection Method”
setting.
Auto
Outputs 1920 × 1080p/
24 Hz video signals only
when connecting a 1080/
24p-compatible TV using
the HDMI OUT jack.
On
Off
Outputs 1920 × 1080p/
24 Hz video signals
regardless of the connected
TV type.
HDMI Resolution/Component Resolution
Auto (HDMI
only)
Normally select this.
The player outputs
signals starting from the
highest resolution
Select this when your TV is
not compatible with 1080/
24p video signals.
acceptable to the TV:
1080p > 1080i > 720p >
480p/576p > 480i/576i
If the resulting image
format is undesirable,
try another setting that
suits your TV.
b
No BD-ROM picture appears when the connected
TV is non-compatible with 1080/24p and “BD-
ROM 1080/24p Output” is set to “On.” In this case,
press HOME to display the home menu, and change
the “BD-ROM 1080/24p Output” setting.
480i/576i
480p/576p
720p
Outputs480i/576i video
signals.
YCbCr/RGB (HDMI)
Outputs 480p/576p
video signals.
Sets the colour setting for video signals
output from the HDMI OUT jack. Select the
setting that matches the connected TV type.
Outputs 720p video
signals.
1080i
Outputs 1080i video
signals.
Auto
Automatically detects the
connected TV type, and
switches to the matching
colour setting.
1080p (HDMI Outputs 1080p video
only) signals.
YCbCr (4:2:2) Outputs YCbCr 4:2:2 video
signals.
YCbCr (4:4:4) Outputs YCbCr 4:4:4 video
signals.
RGB (16-235) Select this when connecting
to a device that only
supports RGB limited range.
RGB (0-255) Select this when connecting
to an RGB (0-255) device.
52
HDMI Deep Colour Output
x.v.Colour Output
Sets the Deep Colour (colour depth) setting
for video signals output from the HDMI OUT
jack.
Sets whether to send xvYCC information to
the connected TV.
Combining xvYCC-compatible video with a
TV that supports x.v.Colour display makes it
possible to more accurately reproduce object
colours present in the natural world.
The colour depth is indicated by the number
of bits, and more colours can be reproduced
as the value increases. The player supports a
colour depth of up to 12 bits. Connecting the
player and a TV that supports Deep Colour
allows more accurate colour reproduction
than when connecting it to a TV that does not
support Deep Colour.
Auto
Off
Normally select this.
Select this when the picture
is unstable or colours appear
unnatural.
Auto
12bit
10bit
Off
Normally select this.
Pause Mode
Outputs 12bit video signals.
Outputs 10bit video signals.
Sets the picture mode for DVD playback
pause status. For BD-ROMs or discs
containing AVCHD files, “Pause Mode”
automatically switches to “Auto.”
Select this when the picture
is unstable or colours appear
unnatural.
Auto
Normally select this.
Dynamic moving pictures
appear without blurring.
SBM
Sets whether to use the Super Bit Mapping
(only for video signals output from the HDMI
OUT jack).
Frame
Displays static pictures at
high resolution.
On
Smooths reproduction of the
video signal. Normally
select this.
Off
Turns off the function.
53
To set the speakers
Audio Settings
1
Select “Speaker Settings” in “Audio
Settings,” and press ENTER.
The default settings are underlined.
Audio Output Priority
Selects the jack type to output audio signals.
2-channel Linear PCM signals are output at
48 kHz maximum from output jacks other
than the priority jacks.
2
3
4
Select “Size” or “Distance,” and press
ENTER.
HDMI
Outputs audio signals from
the HDMI OUT jack.
Select a setup item using M/m, and press
ENTER.
Coaxial/
Optical
Outputs audio signals from
the DIGITAL OUT
(OPTICAL/COAXIAL)
jack.
Select or set a setting using M/m, and
press ENTER.
Multi Channel Select this when connecting
Size
Analogue
an AV amplifier (receiver)
via the MULTI CHANNEL
OUTPUT jacks.
Selects the size of the speakers.
• Front
Stereo
Analogue
Outputs audio signals from
the LINE OUT (R-AUDIO-
L) jacks.
Large
Normally select this
position.
Small
Select this when the
speakers cannot reproduce
adequate low frequencies.
Headphones Outputs audio signals from
the headphone jack
• Centre
Speaker Settings
Large
Normally select this
position.
To obtain the best possible surround sound,
set the speakers you have connected and their
distance from your listening position.
Then use the test tone to adjust the volume
and the balance of the speakers to the same
level.
This setting is selectable when “Audio
Output Priority” is set to “Multi Channel
Analogue.”
Small
None
Select this when the speaker
cannot reproduce adequate
low frequencies.
Select this if you do not
connect a centre speaker.
• Surround
Large
Normally select this
position.
Small
None
Select this when the
speakers cannot reproduce
adequate low frequencies.
Select this if you do not
connect surround speakers.
54
• Surround Back
Large
Normally select this
position.
Small
None
Select this when the
speakers cannot reproduce
adequate low frequencies.
Select this if you do not
connect surround back
speakers.
• Subwoofer
Yes
Select this if you connect a
subwoofer to output the
LFE (low frequency effect)
signals from the subwoofer.
Change the “Distance” setting each time you
move the speakers. Start from the front
speakers.
None
Select this if you do not
connect a subwoofer.
Front
Set this between 1.0 metre
and 15.0 metres in 0.2 metre
increments.
(3.0 [m])
b
• When you play a BD or DVD that does not have
subwoofer output recorded, no sound is produced
from the subwoofer, even if “Subwoofer” is set to
“Yes.”
• Since subwoofer use is set as the player default
setting, “Subwoofer” cannot be set to “None”
when “Front” is set to “Small.”
• When connecting the front speakers that cannot
reproduce adequate low frequencies and a
subwoofer is not connected, set “Front” to
“Large,” and “Subwoofer” to “None.”
Centre
(3.0 [m])
Set this within –1.6 metres
and +0.6 metre of the
“Front” setting (0 to
15.6 metres, 0.2 metre
increments). For example, if
“Front” is set to 1.6 metres,
“Centre” can be set between
0 metre and 2.2 metres.
Surround
(3.0 [m])
Set this within –5.0 metres
and +0.6 metre of the
“Front” setting (0 to
15.6 metres, 0.2 metre
increments). For example, if
“Front” is set to 5.0 metres,
“Surround” can be set
between 0 metre and
5.6 metres.
Distance
Sets the distance from your listening position
to the speakers.
Set the distance to your front speakers in
“Front” first (A = 1.0 m to 15.0 m). Then
adjust the values in “Centre” (centre speaker
B), “Surround” (surround speakers C),
“Surround Back” (surround back speakers
D), and “Subwoofer” (E) to reflect the
actual distance to your centre speaker,
surround speakers, surround back speakers,
and subwoofer.
,continued
55
Level
Surround
Back
(3.0 [m])
Set this within –5.0 metres
and +0.6 metre of the
“Front” setting (0 to
15.6 metres, 0.2 metre
increments). For example, if
“Front” is set to 5.0 metres,
“Surround Back” can be set
between 0 metre and
You can vary the level of each speaker as
follows. Be sure to set “Test Tone” to “On”
for easy adjustment.
Front
Left
Front
Right
(0.0 [dB])
Adjust the level of the front
speakers (–12.0 dB to
0.0 dB, 0.5 dB increments).
5.6 metres.
Subwoofer
(3.0 [m])
Set this within –1.6 metres
and +0.6 metre of the
“Front” setting (0 to
15.6 metres, 0.2 metre
increments). For example, if
“Front” is set to 1.6 metres,
“Subwoofer” can be set
between 0 metre and
2.2 metres.
Centre
(0.0 [dB])
Adjust the level of the centre
speaker (–12.0 dB to 0.0 dB,
0.5 dB increments).
Surround
Left
Surround
Right
Adjust the level of the
surround speakers (–12.0 dB
to 0.0 dB, 0.5 dB
increments).
(0.0 [dB])
Surround
Back
Left
Surround
Back
Right
Adjust the level of the
surround back speakers
(–12.0 dB to 0.0 dB, 0.5 dB
increments).
To adjust the speaker level
1
2
3
Select “Speaker Settings” in “Audio
Settings,” and press ENTER.
Select “Test Tone” using M/m, and press
ENTER.
(0.0 [dB])
Select “On” using M/m, and press
ENTER.
Subwoofer
(0.0 [dB])
Adjust the level of the
subwoofer (–12.0 dB to
0.0 dB, 0.5 dB increments).
You will hear the test tone from each
speaker in sequence.
Test Tone
4
From your listening position, adjust the
value of “Level” using </M/m/,.
The test tone is emitted from the selected
speaker.
On
The player emits a test tone
in sequence from the
MULTI CHANNEL
OUTPUT jacks to adjust the
sound level from each
speaker. When you select
one of the “Speaker
Settings” items, the test tone
is emitted from the selected
speaker.
5
6
Press ENTER when you finish adjusting.
Press RETURN to return to the previous
screen.
7
8
Select “Test Tone” using M/m, and press
ENTER.
Off
The test tone is not emitted
from the speakers.
Select “Off” using M/m, and press
ENTER.
z
To adjust the level without listening to the test tone,
adjust the level using M/m, and press ENTER.
56
Audio (HDMI)
Dolby Digital
Selects the signal type for the HDMI OUT
jack.
Selects the audio signals output when playing
Dolby Digital discs.
This setting affects the output from the
DIGITAL OUT (COAXIAL/OPTICAL)
jack.
Auto
Normally select this.
Outputs audio signals
according to the status of the
connected HDMI device.
Downmix
PCM
Converts to output Linear
PCM signals. Select this
when connecting an audio
device without a built-in
Dolby Digital decoder.
2ch PCM
Downmixes to 2-channel
Linear PCM signals before
outputting from the HDMI
OUT jack.
Dolby Digital
Select this when connecting
an audio device with a built-
in Dolby Digital decoder.
b
Select “2ch PCM” when connecting a TV or an AV
amplifier (receiver) that does not support Dolby
Digital or DTS, otherwise noise or no sound may
result.
DTS
Selects the audio signals output when playing
DTS discs. This setting affects the output
from the DIGITAL OUT (COAXIAL/
OPTICAL) jack.
BD Audio Setting
Selects whether to mix or not mix interactive
audio and secondary audio (commentary)
when playing a BD that contains such audio.
Downmix
PCM
Converts to output Linear
PCM signals. Select this
when connecting to an audio
device without a built-in
DTS decoder.
Mix
Outputs the audio obtained
by mixing the interactive
audio and secondary audio
to the primary audio.
DTS
Select this when connecting
to an audio device with a
built-in DTS decoder.
Direct
Outputs the primary audio
only.
b
PCM 96 kHz and PCM 192 kHz audio signals are
output as PCM 48 kHz audio signals when “BD
Audio Setting” is set to “Mix.”
48kHz/96kHz PCM
Selects the maximum sampling frequency for
the PCM signals output from the DIGITAL
OUT (OPTICAL/COAXIAL) jack.
Audio ATT
48kHz/16bit
Outputs audio signals of
96 kHz sampling as 48 kHz/
16 bit.
Lowers the audio output level to prevent
sound distortion.
On
Off
Enables Audio Attenuation.
Disables Audio Attenuation.
96kHz/24bit
Outputs audio signals of
96 kHz sampling as 96 kHz/
24 bit. However, the signals
will be output as 48 kHz/
16 bit if the source is copy-
protected.
b
“Audio ATT” does not affect the output from the
HDMI OUT jack, the DIGITAL OUT (OPTICAL/
COAXIAL) jack, and the PHONES jack.
,continued
57
b
• If you select “96kHz/24bit” when an AV
amplifier (receiver) that does not support 96 kHz
is connected, no sound or a loud sound may
result.
Downmix
Sets the downmix method of multi-channel to
two-channel sound.
• “48kHz/96kHz PCM” is not effective when
“Audio Output Priority” is set to “HDMI,” “Multi
Channel Analogue,” or “Stereo Analogue.”
Dolby
Surround
Outputs the Dolby Surround
(Pro Logic) signals in 2
channels. Select this when
connecting an audio device
that supports Dolby
Audio DRC
Surround (Pro Logic).
Selects the dynamic range (compression level
of the sound) setting when playing a BD or
DVD that conforms to “Audio DRC.”
Normal
Outputs audio signals
without Dolby Surround
(Pro Logic) effect. Select
this when connecting an
audio device that does not
support Dolby Surround
(Pro Logic).
Auto
Performs playback at the
dynamic range specified by
the disc (BD-ROM only).
Other discs are played back
at the “Standard” level.
b
“Downmix” has no effect on the bitstream audio
output from the DIGITAL OUT (OPTICAL/
COAXIAL)/HDMI OUT jack.
Standard
Performs playback at a
compression level between
“TV Mode” and “Wide
Range.”
TV Mode
Sounds are compressed
heavily. Low sounds are
easier to hear.
Wide Range
No compression works. A
more dynamic sound is
produced.
b
• “Audio DRC” is effective only when playing
Dolby Digital, Dolby Digital Plus, and Dolby
TrueHD audio signals.
• When “Dolby Digital” is set to “Dolby Digital” in
DRC” has no effect on the audio output from the
DIGITAL OUT (OPTICAL/COAXIAL) jack.
However, this excludes the following cases.
– when “BD Audio Setting” is set to “Mix” when
playing a BD.
– when “Audio Output Priority” is set to
“HDMI,” “Multi Channel Analogue,” “Stereo
Analogue,” or “Headphones.”
58
4 Select the age restriction, and press
ENTER.
BD/DVD Viewing
Settings
The lower the value, the stricter the
limitation.
If you select “Select Age Restriction,”
you can enter the age from “0” to “255”
using </M/m/, or the number
buttons.
The default settings are underlined.
• To cancel the Parental Control setting,
select “No Restrictions.”
BD/DVD Menu
Selects the default menu language for BD-
ROMs or DVD VIDEOs.
When you select “Select Language Code,”
the display for entering the language code
appears. Enter the code for your language by
z
You can change the password (see “Password” on
page 60).
b
• If you forget the password, reset the player
Audio
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this player.
Selects the default track language for BD-
ROMs or DVD VIDEOs.
• Depending on the disc, you may be asked to
change the Parental Control level while playing
the disc. In this case, enter your password, then
change the level.
• When “255” is selected in “Select Age
Restriction,” the Parental Control setting is
cancelled.
When you select “Original,” the language
given priority in the disc is selected.
When you select “Select Language Code,”
the display for entering the language code
appears. Enter the code for your language by
Subtitle
DVD Parental Control
Selects the default subtitle language for BD-
ROMs or DVD VIDEOs.
When you select “Select Language Code,”
the display for entering the language code
appears. Enter the code for your language by
Playback of some DVD VIDEOs can be
limited according to the age of the users.
Scenes may be blocked or replaced with
different scenes.
1 Select “DVD Parental Control” in “BD/
DVD Viewing Settings,” and press
ENTER.
BD Parental Control
2 Enter your four-digit password using
the number buttons.
Playback of some BD-ROMs can be limited
according to the age of the users. Scenes may
be blocked or replaced with different scenes.
3 Select “OK,” and press ENTER.
4 Select a level, and press ENTER.
The lower the value, the stricter the
limitation.
1 Select “BD Parental Control” in “BD/
DVD Viewing Settings,” and press
ENTER.
• To cancel the Parental Control setting,
select “No Restrictions.”
2 Enter your four-digit password using
the number buttons.
3 Select “OK,” and press ENTER.
,continued
59
z
You can change the password (see “Password” on
Password
Sets or changes the password for the Parental
Control function. A password allows you to
set a restriction on BD-ROM or DVD
VIDEO playback. If necessary, you can
differentiate the restriction levels for BD-
ROMs and DVD VIDEOs.
b
• If you forget the password, reset the player
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this player.
• Depending on the disc, you may be asked to
change the Parental Control level while playing
the disc. In this case, enter your password, then
change the level.
1 Select “Password” in “BD/DVD
Viewing Settings,” and press ENTER.
2 Enter your four-digit password using
the number buttons.
3 Select “OK,” and press ENTER.
Parental Control Region Code
Playback of some BD-ROMs or DVD
VIDEOs can be limited according to the
geographic area. Scenes may be blocked or
replaced with different scenes.
To change the password
1
2
the number buttons.
Select “OK,” and press ENTER.
1 Select “Parental Control Region
Code” in “BD/DVD Viewing Settings,”
and press ENTER.
Hybrid Disc Playback Layer
2 Enter your four-digit password using
the number buttons.
Selects the layer priority when playing a
Hybrid Disc. To change the setting, turn the
player off and on again.
3 Select “OK,” and press ENTER.
4 Select the area restriction, and press
BD
Plays BD layer.
ENTER.
DVD/CD
Plays DVD or CD layer.
When you select “Select Region Code,”
the display for entering the region code
appears. Enter the code for the area
restriction by referring to “Parental
BD Internet Connection
Sets whether to allow Internet connections
from the contents of a BD (in BDMV mode)
being played. Network connections and
settings are required when using this function
z
You can change the password (see “Password” on
Allow
Normally select this.
b
Do not allow
Prohibits Internet
connection.
• If you forget the password, reset the player
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this player.
• Depending on the disc, you may be asked to
change the Parental Control level while playing
the disc. In this case, enter your password, then
change the level.
60
Photo Settings
System Settings
The default setting is underlined.
The default settings are underlined.
Slideshow Speed
OSD
Changes the slideshow speed.
Selects your language for the player on-
screen displays.
Fast
Photos change rapidly.
Normal
Photos change at normal
speed.
Dimmer
Slow
Photos change slowly.
Adjusts the lighting of the front panel display.
Bright
Dark
Off
Bright lighting.
Low lighting.
Turns off the lighting during
playback. Lowlightingother
than during playback.
Control for HDMI
On
Allows you to use the
“Control for HDMI”
function (page 18).
Off
Turns off the function.
Quick Start Mode
On
Off
Shortens the startup time
when turning on the player.
The default setting.
b
When “Quick Start Mode” is set to “On,”
– power consumption will be higher than when
“Quick Start Mode” is set to “Off” and
– the ventilation fan may turn on depending on the
surrounding temperature.
,continued
61
Auto Power Off
Software Update Notification
The player automatically turns off if you do
not press any of the buttons on the player or
remote for more than 30 minutes, unless you
are playing BDs/DVDs/CDs/photo files or
are updating software.
Informs you of newer software version
information. Network connections and
settings are required when using this function
On
Sets the player to inform you
of newer software version
information (page 49).
On
Turns on the “Auto Power
Off” function.
Off
Turns off the function.
Off
Turns off the function.
System Information
Auto Display
Displays the player’s software version
information and the MAC address.
On
Automatically displays
information on the screen
when changing the viewing
titles, picture modes, audio
signals, etc.
Off
Displays information only
when you press DISPLAY.
Screen Saver
The screen saver image appears when you do
not use the player for more than 15 minutes
while an on-screen display, such as the home
menu, is displayed on your TV screen. The
screen saver image helps prevent your
display device from becoming damaged
(ghosting).
On
Turns on the screen saver
function.
Off
Turns off the function.
62
4 Select the configuration method of
wireless LAN, and press ENTER.
Network Settings
Automatic
registration
(WPS)
When you connect the
player to a Wi-Fi
Protected Setup-
compatible wireless
LAN router (access
point) with security set,
select this and go to
Internet Settings
These items are necessary when you connect
the player to the Internet. Enter the respective
(alphanumeric) values for your broadband
router or wireless LAN router.
The items that need to be set may differ,
depending on the Internet service provider or
the router. For details, refer to the instruction
manuals that have been provided by your
Internet service provider or supplied with the
router.
wireless LAN
(Automaticregistration
Access point Select this when you
scan
connect the player to a
wireless LAN router
(access point) that is
Wi-Fi Protected Setup-
compatible without
security set or not Wi-
Fi Protected Setup-
compatible.
1 Select“Internet Settings” in “Network
Settings,” and press ENTER.
2 Select “Start,” and press ENTER.
3 Select the connected router type, and
Manual
registration
Select this to make all
the settings manually.
press ENTER.
Wireless
Wired
Select this when
connecting via a
wireless LAN router
(access point).
5 Check the following settings of your
wireless LAN router (access point).
– SSID (Service Set Identifier)
– Security type: For details on which
security can be used on this player, see
page 78.
– Security key: The wireless LAN router
(access point) has a WEP or WPA key
according to the selected security type.
• When you select “Access point scan” in
Select this when
connecting to a
broadband router
directly, and go to step
10.
z
• WEP or WPA key may be displayed as
“passphrase” or “network key” depending on
the wireless LAN router (access point).
• The SSID of your wireless LAN router
(access point) is displayed in the wireless
network list on your PC. Check your
,continued
63
6 Select the manual registration
method, and press ENTER.
10 Select the IP address setting method,
and press ENTER.
Auto
Acquisition
Select this when DHCP
(Dynamic Host
Configuration Protocol)
server settings are
available from your
Internet service
Manual
registration
To make all the settings
manually, select this
and enter SSID. To
enter characters, see
page 65.
provider. The network
settings necessary for
the player will be
(WPS) PIN
method
Select this when you
connect the player to a
Wi-Fi Protected Setup-
compatible wireless
LAN router (access
point) and use a PIN
code.
assigned automatically.
Manual
Set the IP address
manually according to
your network
environment.
• When you select “(WPS) PIN method,”
the PIN code of this player appears.
Register the code to the wireless LAN
router (access point) within 2 minutes
For details on the registration, refer to
the instruction manual supplied with
the wireless LAN router (access point).
• When you select “Manual,” set the
following items:
– IP Address
– Subnet Mask
– Default Gateway
The display for the DNS server setting
appears after you set the items.
Enter the DNS server address manually,
7 Select the security, and press ENTER.
The display for entering WEP or WPA
key appears.
11 Select the DNS server setting method,
and press ENTER.
8 Press ENTER to input the WEP or WPA
Auto
Acquires the DNS
server address
automatically.
key.
Manual
Enter the DNS server
address manually.
b
Make sure the WEP or WPA key is correctly
characters on the screen.
• When you select “Manual,” enter the
address in the “Primary DNS” row.
12 Select “Do not use,” and press
ENTER.
9 Press ,.
If your Internet service provider has a
specific proxy server setting, select
“Use,” and fill the “Proxy Server” and
“Port Number” rows. To enter
b
The WEP or WPA key is displayed as 8
asterisks no matter how many characters you
enter.
64
2
Press ,, and enter the next character.
If you make a mistake, follow the next
steps.
13 Select “Perform” using M/m, and
press ENTER.
The network diagnostic starts.
Results are displayed after the player
finishes the network diagnostic.
If an error message appears, follow the
on-screen instructions.
For further details, visit the following
website and check the FAQ contents:
1Move the highlight to the entry field
using M/m.
The colour of the cursor changes to
yellow.
2Move the cursor to the left side of the
character you want to delete using </
,.
Example: when you want to delete
“H” (“SSID Entry” display)
Cursor
14 Select “Finish,” and press ENTER.
15 Check the settings, and select
“Finish,” then press ENTER.
The message “Settings are complete.”
appears.
If an error message appears in the
network diagnostic results, check the
message and set the network settings
again.
To enter characters
3Select “Clear,” and press ENTER.
Use the following procedure to enter SSID,
the WEP/WPA key, or “Proxy Server.”
b
Make sure the security key is correctly entered
the next step, you may not be able to check the
characters on the screen.
Entry field
3
Press the blue button (“Finish”) to finish.
When you input SSID, press , to go to
the next screen.
When you input “Proxy Server,” press
RETURN to exit.
Available buttons
1
Press a number button repeatedly to
select a character.
Example:
Press the number 3 button once to enter
“D.”
Press the number 3 button three times to
enter “F.”
Buttons
Details
Red button
(Letter Type)
Switches the keyboard
between alphabet and
numbers.
Green button
(A/a)
Switches the keyboard
between upper case and
lower case.
Yellow button
(Symbol)
Displays the keyboard for
symbols.
Blue button
(Finish)
The input is entered, and
the player returns to the
previous display.
,continued
65
Buttons
Details
Connection Server Settings
CLEAR
Erases the selected
(Clear/Clear All) character.
To erase all displayed
1 Connect a DLNA certified device to the
network set in “Step 4: Connecting to
the DLNA certified device as a home
server.
characters, press and hold
CLEAR for 2 seconds or
more.
RETURN
(Cancel)
Returns to the previous
display, cancelling the
input.
For details, refer to the instruction
manual supplied with the DLNA
certified device.
</M/m/,,
ENTER
• Select an input function
using </M/m/,, and
press ENTER.
b
When a firewall is set for the DLNA certified
device, disable the function. For details, refer
to the instruction manual supplied with the
DLNA certified device.
• Enter characters as
follows: 1Select a
character selection panel
using </M/m/,, and
press ENTER. 2Select a
character using </,,
and press ENTER.
2 Press HOME.
3 Select
(Setup) using </,.
4 Select “Connection Server Settings”
in “Network Settings,” and press
ENTER.
Network Connection
Diagnostics
The connected server list appears.
You can run the network diagnostic.
1 Select “Network Connection
Diagnostics” in “Network Settings,”
and press ENTER.
2 Select “Start,” and press ENTER.
The network diagnostic starts.
Results are displayed after the player
finishes running the network diagnostic.
If an error message appears, follow the
on-screen instructions and perform
“Network Connection Diagnostics”
again.
If no server appears in the server list,
press OPTIONS to select “Update Server
List,” and press ENTER.
5 Press OPTIONS to select “Network
Diagnostic,” and press ENTER.
3 Select “Finish,” and press ENTER.
6 Select “Start,” and press ENTER.
The network diagnostic starts.
Results are displayed after the player
finishes running the network diagnostic.
• To display detailed results for a server,
select a server using M/m, and press
ENTER. To go back to the results
display, select “Close,” and press
ENTER.
7 Press RETURN to return to the server
list.
8 Press RETURN to exit.
66
To display/hide a server
Easy Setup
1
While the connected server list is
displayed, select a server using M/m, and
press ENTER.
Re-runs the Easy Setup to make the basic
settings.
2
Select “Shown” or “Hidden” using M/m,
and press ENTER.
1 Select “Easy Setup,” and press
ENTER.
When you select “Hidden,” the server
will not be displayed in the photo
category.
2 Select “Start” using </,, and
press ENTER.
z
You can hide a server in the photo category as well.
Select the server using M/m, and press OPTIONS to
select “Hidden,” then press ENTER.
To delete a server from the connected
server list
1
While the connected server list is
displayed, select a server using M/m, and
press OPTIONS.
2
Select “Erase,” and press ENTER.
To delete all the servers, select “Erase
All.”
The display asks for confirmation.
3
Select “OK,” and press ENTER.
The selected server is erased.
67
Resetting
You can reset the player settings to the
factory default by selecting the group of
settings. All the settings within the group will
be reset.
1 Select “Resetting,” and press ENTER.
2 Select “Reset to Factory Default
Settings,” and press ENTER.
3 Select the settings you want to reset to
default, and press ENTER.
The display asks for confirmation.
You can reset the following settings:
– Video Settings
– Audio Settings
– BD/DVD Viewing Settings
– Photo Settings
– System Settings
– Network Settings
– All Settings
4 Select “Start” using </,, and
press ENTER.
b
– all settings within
(Setup) are reset.
– “Video Settings” and “Audio Settings” that can
be adjusted by pressing OPTIONS during
68
Troubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
Power
The power does not turn on.
, Check that the mains lead is connected
securely.
, It takes a short while before the player turns
on.
The message “A new software version has
been found on the network. Perform
update under "Network Update."” appears
on the screen when turning the player on.
the player to a newer software version.
Additional
Information
Disc
The disc does not play.
, The disc is dirty.
, The disc is upside down. Insert the disc with
the playback side facing down.
, The disc is skewed.
, You are attempting to play a disc with a
format that cannot be played back by this
player (page 75).
, The region code on the BD or DVD does
not match the player.
, The player cannot play a recorded disc that
Picture
See also “Connecting to an HDMI jack”
(page 17) when connecting equipment using
the HDMI cable.
There is no picture/picture noise appears.
, Check that all the connecting cables are
securely connected.
,continued
69
, Check whether the connecting cables are
damaged.
and switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
Sound
See also “Connecting to an HDMI jack”
(page 22) when connecting equipment using
the HDMI cable.
, When playing a double-layer BD/DVD, the
video and audio may be momentarily
interrupted at the point where the layers
switch.
There is no sound.
, Check that all the connecting cables are
securely connected.
, Check whether the connecting cables are
damaged.
No picture appears when the video output
resolution selected in “Output Video
Format” is incorrect.
, Press x on the player for more than 10
seconds to reset the video output resolution
to the lowest resolution.
, Check the connection to your AV amplifier
selector on your AV amplifier (receiver) so
that the audio signals of the player are
output from your AV amplifier (receiver).
, The player is in scan mode.
, If the audio signal does not come through
the DIGITAL OUT (OPTICAL/
COAXIAL)/HDMI OUT jack, check the
The picture does not fill the screen, even
though the aspect ratio is set in “DVD
Aspect Ratio” under “Video Settings.”
, The aspect ratio of the disc is fixed on your
The sound is not output correctly.
, Check the “Audio Output Priority” setting
in the “Audio Settings” setup (page 54).
Video signals are not output from the
jacks, other than from the HDMI OUT jack,
when connecting the HDMI OUT jack and
other video output jacks at the same time.
, Set “Output Video Format” to “Component
Video” in the “Video Settings” setup
The sound volume is low.
, The sound volume is low on some BDs or
DVDs.
, Try setting “Audio DRC” to “TV Mode” in
, Set “Audio ATT” to “Off” in the “Audio
The dark area of the picture is too dark/the
bright area is too bright or unnatural.
, Set “Picture Quality Mode” to “Standard”
(default) (see “Adjusting pictures and
The HD Audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio,
and DTS-HD Master Audio) is not output
by bitstream.
, Set “BD Audio Setting” to “Direct” in the
, Check that the connected AV amplifier
(receiver) is compatible with each HD
Audio format.
The picture is not output correctly.
, Check the “Output Video Format” settings
No BD-ROM picture appears.
, Check the “BD-ROM 1080/24p Output”
setting in the “Video Settings” setup
The interactive audio is not output.
, Set “BD Audio Setting” to “Mix” in the
70
The “Control for HDMI” function does not
work (BRAVIA Sync).
HDMI
, Check that the mains lead of the connected
component is securely connected.
, If the HDMI indicator does not appear in
the front panel display, check the HDMI
There is no picture or no sound when
connected to the HDMI OUT jack.
, Try the following: 1Turn the player off
and on again. 2Turn the connected
equipment off and on again. 3Disconnect
and then reconnect the HDMI cable.
, If the player is connected to a TV through
an AV amplifier (receiver), try connecting
the HDMI cable directly to the TV. If the
problem is fixed, refer to the instruction
manual supplied with the AV amplifier
(receiver).
, Check that “Control for HDMI” is set to
, Make sure that the connected component is
compatible with the “Control for HDMI”
function. For details, refer to the instruction
manual supplied with the component.
, Check the connected component’s setting
for the “Control for HDMI” function. For
details, refer to the instruction manual
supplied with the component.
There is no picture or picture noise
appears when connected to the HDMI OUT
jack.
, If you change the HDMI connection, turn
the player off and on again.
, If power failure occurs, set “Control for
HDMI” to “Off,” then set “Control for
, The HDMI OUT jack is connected to a DVI
device that does not support copyright
protection technology.
, For details on the “Control for HDMI”
function, see “About the BRAVIA Sync
, If the HDMI OUT jack is used for video
output, changing the video output
resolution may solve the problem
, If you connect the player to a TV through an
AV amplifier (receiver) that is not
No sound is output from the HDMI OUT
jack.
, The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
compatible with the “Control for HDMI”
function, you may be unable to control the
TV from the player.
, When you connect the player to a TV
through an AV amplifier (receiver), if you
change the HDMI connection, disconnect
and reconnect the mains lead, or a power
failure occurs, try the following: 1Switch
the input selector of the AV amplifier
(receiver) so that the picture from the player
appears on the TV screen. 2Set “Control
for HDMI” to “Off,” then set “Control for
instruction manual supplied with the AV
amplifier (receiver).
The sound is not output correctly when
connected to the HDMI OUT jack.
, The device connected to the HDMI OUT
jack does not support the audio format of
the player. Check the audio settings
The display language on the screen
switches automatically when connected to
the HDMI OUT jack.
, When “Control for HDMI” is set to “On”
(page 61), the display language on the
screen automatically switches according to
the language setting of the connected TV (if
you change the setting on your TV, etc.).
,continued
71
The file name is not correctly displayed.
, The player can only display ISO 8859-1-
compliant character formats. Other
character formats may be displayed
differently.
, Depending on the writing software used,
the input characters may be displayed
differently.
External memory (local
storage)
The external memory is not recognised.
, Try the following: 1Turn the player off.
2(USM1GH only) Align the Vmark of the
EXT slot with the V mark on the external
memory, and insert the external memory.
3Turn the player on. 4Check that the
EXT indicator lights up in the front panel
display.
The disc does not start playing from the
beginning.
Bonus contents or other data that are
contained in a BD-ROM cannot be played.
, Try the following: 1Remove the disc.
2Turn the player off. 3Remove and re-
4Turn the player on. 5Check that the
EXT indicator lights up in the front panel
display. 6Insert the BD-ROM with
BONUSVIEW/BD-LIVE.
Some functions such as Stop or Search
cannot be performed.
, Depending on the disc, you may not be able
to do some of the operations above. Refer to
the instruction manual supplied with the
disc.
The language for the soundtrack/subtitle
or angles cannot be changed.
, Try using the BD’s or DVD’s menu instead
of the direct selection button on the remote
, Multi-lingual tracks/subtitles or multi-
angles are not recorded on the BD or DVD
being played.
A message indicating that the local
storage does not have enough space
appears on the screen.
, Delete unnecessary data in the external
, The BD or DVD prohibits the changing of
the language for the soundtrack/subtitle or
angles.
Operation
The remote does not function.
, The batteries in the remote are weak
, The distance between the remote and the
player is too far.
The disc tray does not open and
“LOCKED” or “TLK ON” appears in the
front panel display.
, When “LOCKED” appears, the player is
locked. To cancel the Child Lock, hold
down N on the player until “UNLOCK”
, When “TLK ON” appears, contact your
Sony dealer or local authorised Sony
service facility.
, The remote is not pointed at the remote
sensor on the player.
The player does not detect a USB device
connected to the player.
, Make sure that the USB device is securely
connected to the USB jack on the front
, Check if the USB device or a cable is
damaged.
, Check if the USB device is on.
, The USB device is connected via a USB
hub. Connect the USB device directly to the
player.
72
, Depending on the surrounding environment
such as the wall material, radio wave
receiving condition, or obstacles between
the player and the wireless LAN router
(access point), the communication distance
may be shortened. Move the player and the
wireless LAN router (access point) closer to
each other.
The disc tray does not open and you
cannot remove the disc even after you
press Z.
, Try the following: 1Turn the player off,
and disconnect the mains lead.
2Reconnect the mains lead while pressing
down Z on the player. 3Keep pressing
down Z on the player until the tray opens.
4Remove the disc. 5When “WAIT”
appears in the front panel display, hold
down [/1 on the player for more than 10
seconds until the player turns on again.
, Devices that use a 2.4 GHz frequency band
such as a microwave, Bluetooth, or digital
cordless device may interrupt the
communication. Move the player away
from such devices, or turn off such devices.
The player does not respond to any button.
, Moisture has condensed inside the player
, Hold down [/1 on the player for more than
10 seconds until the indicators in the front
panel display turn off.
The wireless LAN router (access point) is
not displayed on “Access point scan” list.
, The wireless LAN router (access point) is
not displayed if you set the SSID to hide
with the wireless LAN router (access point).
Check and reset the SSID of the wireless
LAN router (access point) manually
If the player still does not respond to any
button, disconnect then reconnect the mains
lead.
Wireless LAN
Self-Diagnosis Function
You cannot connect your PC to the Internet
after you set the “Setting wireless LAN
(Automatic registration (WPS))” settings.
, The wireless settings of the wireless LAN
router (access point) may change
When the self-diagnosis function is activated
to prevent the player from malfunctioning, an
error code appears in the front panel display,
or just
appears without any messages on
the entire screen.
automatically if you use the Wi-Fi
In these cases, check the following.
Protected Setup function before adjusting
the settings of the wireless LAN router
(access point). In this case, check the
wireless settings of the wireless LAN router
(access point), and change the wireless
settings of your PC accordingly. For details,
refer to the instruction manual supplied
with the wireless LAN router (access point).
When an error code appears in the front
panel display
Error code Corrective action
Exxxx
SYS ERR
VUP NG
Contact your nearest Sony dealer
or local authorised Sony service
facility and give the error code.
FAN ERR
• Check that the ventilation
holes on the rear of the player
are not blocked.
• Place the player in a location
with adequate ventilation to
prevent heat build-up in the
player.
You cannot connect the player to the
wireless LAN router (access point).
, Check if the wireless LAN router (access
point) is on.
When just
appears without any
messages on the entire screen
Contact your nearest Sony dealer or local
authorised Sony service facility.
73
Playable Discs
Icon used in
this manual
Type
Disc Logo
Characteristics
BD-ROMs and BD-REs/BD-Rs in
BDMV and BDAV mode, including
8 cm discs (single layer) and DL discs
BD
Blu-ray Disc
BD-REs/BD-Rs containing MP3 audio
tracks* or JPEG image files
DATA BD
DVD
Discs such as movies that can be
purchased or rented
DVD VIDEO
DVD+RWs/DVD+Rs in +VR mode or
DVD-RWs/DVD-Rs in video and VR
mode, including 8 cm discs (single
layer) and DVD+R DL/DVD-R DL
discs
DVD
DVD
DVD-ROMs and DVD+RWs/DVD+Rs/
DVD-RWs/DVD-Rs containing MP3
audio tracks* or JPEG image files
DATA DVD
DATA DVD
Music CDs or CD-Rs/CD-RWs in music
CD format
CD
CD
CD-ROMs and CD-Rs/CD-RWs
containing MP3 audio tracks* or JPEG
image files
DATA CD
—
DATA CD
* MP3 (MPEG-1 Audio Layer 3) is a standard
format defined by ISO (International
Organization for Standardization)/IEC
(International Electrotechnical Commission)
MPEG which compresses audio data.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
Notes about BD-ROM compatibility
Since the Blu-ray Disc specifications are new
and evolving, some discs may not be playable
depending on the disc type and the version.
The audio output differs depending on the
source, connected output jack, and selected
74
b
Discs that cannot be played
• BDs with cartridge
• Notes about BD-REs/BD-Rs, DVD+RWs/
DVD+Rs, DVD-RWs/DVD-Rs, or CD-Rs/
CD-RWs
• DVD-RAMs
• HD DVDs
Some BD-REs/BD-Rs, DVD+RWs/DVD+Rs,
DVD-RWs/DVD-Rs, or CD-Rs/CD-RWs cannot
be played on this player due to the recording
quality or physical condition of the disc, or the
characteristics of the recording device and
authoring software. The BD-Rs recorded on a PC
cannot be played if postscripts are recordable.
A CD or DVD disc will not play if it has not been
correctly finalised. For more information, refer to
the instruction manual supplied with the
recording device. Note that some playback
functions may not work with some DVD+RWs/
DVD+Rs, even if they have been correctly
finalised. In this case, view the disc using normal
playback.
• DivX discs
• DVD Audio discs
• PHOTO CDs
• Data part of CD-Extras
• VCDs/Super VCDs
• HD layer on Super Audio CDs
• Audio material side on DualDiscs
• BD-ROMs/DVD VIDEOs with a different
Note on playback operations of BDs/DVDs
Some playback operations of BDs/DVDs
may be intentionally set by software
producers. Since this player plays BDs/
DVDs according to the disc contents the
software producers designed, some playback
features may not be available. Refer to the
instruction manual supplied with the BDs/
DVDs.
• Music discs encoded with copyright
protection technologies
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Various music discs encoded with copyright
protection technologies are being marketed by
some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
Region code (BD-ROM/DVD VIDEO only)
Your player has a region code printed on the
rear of the unit and will only play BD-ROMs/
DVD VIDEOs (playback only) labelled with
identical region codes. This system is used to
protect copyrights.
DVD VIDEOs labelled
on this player.
Depending on the BD-ROM/DVD VIDEO,
no region code may be indicated even though
playing the BD-ROM/DVD VIDEO is
prohibited by area restrictions.
• Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side.
However, since the audio material side does not
conform to the Compact Disc (CD) standard,
playback on this product is not guaranteed.
• Note about double-layer BDs/DVDs
The playback pictures and sound may be
momentarily interrupted when the layers switch.
• Note about 8 cm BD-REs/8 cm BD-Rs
Some 8 cm BD-REs/8 cm BD-Rs cannot be
played on this player.
will also play
ALL
Region code
• Note about BD-REs/BD-Rs
This player supports Ver. 2.1 BD-RE and
Ver. 1.1, 1.2 and 1.3 BD-R including organic
pigment type BD-R (LTH type).
• Note about DTS 5.1 MUSIC DISCs
This player can play DTS 5.1 MUSIC DISCs.
,continued
75
*1
*2
A high-definition specification which utilizes
1080 effective scanning lines and the interlace
system.
A high-definition specification which utilizes
720 effective scanning lines and the progressive
system.
About playback of discs recorded in
AVCHD format
This player can play AVCHD format discs.
TM
b
What is the AVCHD format?
• Some AVCHD format discs may not play,
depending on the recording condition.
• The AVCHD format disc will not play if it has not
been correctly finalised.
The AVCHD format is a high-definition digital
video camera format used to record SD (standard
definition) or HD (high definition) signals of either
*1
the 1080i specification or the 720p
*2
specification on DVDs, using efficient data
compression coding technology. The MPEG-4
AVC/H.264 format is adopted to compress video
data, and the Dolby Digital or Linear PCM system
is used to compress audio data. The MPEG-4 AVC/
H.264 format is capable of compressing images at
higher efficiency than that of the conventional
image compressing format. The MPEG-4 AVC/
H.264 format enables a high definition (HD) video
signal shot on a digital video camera recorder to be
recorded on DVD discs, in the same way as it would
be for a standard definition (SD) television signal.
Video Output Resolution
Output resolution differs depending on the “Output Video Format” setting in the “Video
When “Output Video Format” is set to
“HDMI”
When “Output Video Format” is set to
“Component Video”
Resolution
setting
LINE OUT
LINE OUT
VIDEO/
S VIDEO
jack
COMPONENT HDMI OUT
VIDEO/
S VIDEO
jack
COMPONENT HDMI OUT
VIDEO jacks
jack
VIDEO jacks
jack
480i/576i
480p/576p
720p
480i/576i
480i/576i
480i/576i
480i/576i
no picture
480i/576i
480i/576i
480i/576i
480i/576i
no picture
480i/576i
480p/576p
720p
480i/576i
480i/576i
480i/576i
480i/576i
480i/576i
480i/576i
480p/576p 480p/576p
720p*
720p*
1080i
1080i
1080i*
1080i*
1080p
1080p
unselectable unselectable unselectable
* Protected contents on DVDs are output at 480p/
576p resolution. Protected contents on BDs are
output at 576p resolution.
When “Output Video Format” is set to
“Video or S Video”
480i/576i video signals are output from the
LINE OUT VIDEO/S VIDEO or
COMPONENT VIDEO jack, and 480p/576p
video signals are output from the HDMI OUT
jack.
76
Audio Output Signals and Player Settings
The audio output signals differ, depending on the source, output jack, and the AV amplifier
(receiver) you use. To enjoy the sound you want, check the support audio format of the AV
amplifier (receiver), the connection to the AV amplifier (receiver), and the “Audio Settings”
setup pattern according to the tables below.
To enjoy
Connections and settings
“Audio
Settings”
setup pattern
Audio output
signal
AV amplifier (receiver) Player audio
support audio format jack*1
Disc/source
HD Audio*3
HD Audio*2
Up to 7.1ch LPCM*3 Multi-channel LPCM
Dolby Digital/DTS Dolby Digital/DTS
Dolby Digital/DTS*4 Dolby Digital/DTS
HDMI OUT
A
HD Audio*2
DIGITAL OUT
C
D
MULTI
CHANNEL
OUTPUT
7.1ch
—
HDMI OUT
DIGITAL OUT
HDMI OUT
A
C
A
Dolby Digital/DTS
Up to 7.1ch LPCM
5.1ch
Dolby Digital/DTS
Multi-channel LPCM
—
BD
Dolby Digital
/
DTS
MULTI
CHANNEL
OUTPUT
D
7.1ch LPCM/
5.1ch LPCM
Multi-channel LPCM
2ch LPCM
HDMI OUT
B
C
7.1ch LPCM/ 2ch LPCM
DIGITAL OUT
5.1ch LPCM
MULTI
CHANNEL
OUTPUT
7.1ch/5.1ch
—
Dolby Digital/DTS
—
D
HDMI OUT
B
C
Dolby Digital/DTS
5.1ch
DIGITAL OUT
Dolby Digital
DTS
/
DVD
MULTI
CHANNEL
OUTPUT
D
“Audio Settings” setup table
Audio Output
BD Audio
Setting
Setup
Audio (HDMI)*6
Dolby Digital*6
Priority*5
DTS*6 (page 57)
pattern
A Direct
AB
C
HDMI
Auto
—
—
DTS
—
—
Dolby Digital
—
B Mix or Direct
Coaxial/Optical
—
—
Multi Channel
Analogue
D
—
*1
*2
*3
When connecting to the LINE OUT (R-AUDIO-
L) jacks, 2-channel signals are output.
HD Audio includes Dolby TrueHD, Dolby
Digital Plus, DTS-HD Master Audio, and DTS-
HD High Resolution Audio formats.
For Dolby TrueHD and DTS-HD Master Audio,
set “HDMI Resolution” of “Output Video
Format” to other than “480i/576i” or “480p/
The 2-channel or less-channel primary/
secondary audio signals are output as 2-channel
LPCM signals.
*4
,continued
77
*5
*6
The 2-channel LPCM signals are output from
output jacks other than priority jacks.
The 2-channel LPCM signals are output in the
following cases:
– when “Audio (HDMI)” is set to “2ch PCM” in
the “Audio Settings” setup.
About Wireless LAN
Security
– when “Dolby Digital”/“DTS” is set to
“Downmix PCM” in the “Audio Settings”
setup.
– when you play a DVD that contains MPEG
Audio.
Since communication via the wireless LAN
function is established by radio waves, the
wireless signal may be susceptible to
interception. To protect wireless
communication, this player supports various
security functions. Be sure to correctly
configure the security settings in accordance
with your network environment.
No Security
Although you can easily make settings,
anyone can intercept wireless
communication or intrude into your wireless
network, even without any sophisticated
tools. Keep in mind that there is a risk of
unauthorized access or interception of data.
WEP
WEP applies security to communications to
prevent outsiders from intercepting
communications or intruding into your
wireless network. WEP is a legacy security
technology that enables older devices, which
do not support TKIP/AES, to be connected.
WPA-PSK (TKIP)
TKIP is a security technology developed to
correct for the deficiencies of WEP. TKIP
assures a higher security level than WEP.
WPA-PSK (AES), WPA2-PSK (AES)
AES is a security technology that uses an
advanced security method that is distinct
from WEP and TKIP.
AES assures a higher security level than
WEP or TKIP.
78
Modulation:
DS-SS Modem and OFDM Modem
Specifications
General
System
Laser: Semiconductor laser
Power requirements:
220–240 V AC, 50/60 Hz
Power consumption:
32 W
Inputs and outputs
(Jack name:
Dimensions (approx.):
430 mm × 246 mm × 70 mm
(width/depth/height) incl. projecting parts
Mass (approx.):
Jack type/Output level/Load impedance)
LINE OUT R-AUDIO-L:
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (OPTICAL):
Optical output jack/–18 dBm
(wave length 660 nm)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
MULTI CHANNEL OUTPUT:
Phono jack/2 Vrms/10 kilohms
PHONES:
3.0 kg
Operating temperature:
5 ºC to 35 ºC
Operating humidity:
25 % to 80 %
Supplied accessories
Stereo phone jack/10 mW/(32 ohms)
HDMI OUT:
HDMI 19-pin standard connector
COMPONENT VIDEO OUT
(Y, PB/CB, PR/CR):
Specifications and design are subject to
change without notice.
Phono jack/Y: 1.0 Vp-p/
PB/CB, PR/CR: 0.7 Vp-p/75 ohms
LINE OUT VIDEO:
Phono jack/1.0 Vp-p/75 ohms
LINE OUT S VIDEO:
4-pin mini DIN/
Y: 1.0 Vp-p, C: 0.3 Vp-p/75 ohms
LAN (100):
100BASE-TX Terminal
EXT:
External memory slot (For connecting the
external memory)
DC output: 5 V 500 mA Max
USB:
USB jack Type A (For connecting digital
still camera and USB memory)
Wireless
Wireless LAN standard:
IEEE802.11a/b/g
IEEE802.11n draft 2.0
Frequency range:
European models:
2.4 GHz band: Channels 1-13
5 GHz band: Channels 36-64, 100-140
Australian/New Zealand models:
Australia only
2.4 GHz band: Channels 1-13
5 GHz band: Channels 36-64, 100-116,
132-140, 149-165
New Zealand only
2.4 GHz band: Channels 1-13
5 GHz band: Channels 36-64, 100-140,
149-165
79
Language Code List
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language
Code Language
Code Language
Code Language
not specified
Parental Control/Area Code
Number, Area (Code)
2044, Argentina (ar)
2047, Australia (au)
2046, Austria (at)
2057, Belgium (be)
2070, Brazil (br)
2200, Greece (gr)
2219, Hong Kong (hk)
2248, India (in)
2379, Norway (no)
2427, Pakistan (pk)
2424, Philippines (ph)
2428, Poland (pl)
2238, Indonesia (id)
2239, Ireland (ie)
2436, Portugal (pt)
2489, Russia (ru)
2501, Singapore (sg)
2149, Spain (es)
2499, Sweden (se)
2086, Switzerland (ch)
2543, Taiwan (tw)
2528, Thailand (th)
2184, United Kingdom (gb)
2079, Canada (ca)
2090, Chile (cl)
2254, Italy (it)
2276, Japan (jp)
2092, China (cn)
2093, Colombia (co)
2115, Denmark (dk)
2165, Finland (fi)
2174, France (fr)
2109, Germany (de)
2304, Korea (kr)
2333, Luxembourg (lu)
2363, Malaysia (my)
2362, Mexico (mx)
2376, Netherlands (nl)
2390, New Zealand (nz)
80
3. Automatic Update
The Software contains a functionality by which it is updated
automatically when the Product is connected to a server
belonging to Sony or to a third party designated by Sony. When
you specify your intention not to use this automatic update
functionality, or when the setting asking whether you wish to
update automatically is activated and you decline to execute
updates, it is assumed that you agree that the security
functionality improvements, error corrections, other functional
updates or any other changes offered by Sony through such
updates would not be made to the Software and that your current
and further use of the Software may be affected thereby.
Terms and Conditions of
Use and End User
License Agreement
The Sony Blu-ray Disc player (“Product”) and associated
software (“Software”) are provided and maintained by Sony
Corporation and its affiliates (“Sony”). Sony also provides and
maintains associated service (the “Service”), including any
subsite accessible through the Service’s Internet homepage (the
“Site”). The Software includes software embedded in the
Product; stored on any media, bundled with the Product or
otherwise provided by Sony; downloaded from the Site or
otherwise made accessible or provided by Sony; any such media
and any printed or “on-line” or electronic documentation
associated with the Product and all updates and upgrades thereto.
When the automatic update functionality described in the
previous paragraph is activated, it is assumed that you agree (a)
that the Software will be automatically updated as necessary to
improve security functionality, to correct errors, to improve
update functionality, or for other purposes, and (b) that this
updating of the Software may be accompanied by the
augmenting, modifying, or removing of functionality of the
Software.
4. Additional Terms Governing Product Software
You may use the Software solely in conjunction with the Product
that accompanied the Software. The Software is licensed, not
sold. In addition to the terms set forth in other portions of this
Agreement, the Software is subject to the following:
WHEN YOU ACCESS, BROWSE, OR USE THE SERVICE,
PRODUCT, SOFTWARE, AND/OR SITE, YOU ACCEPT,
WITHOUT LIMITATION OR QUALIFICATION, THE
TERMS AND CONDITIONS SET FORTH HEREIN, SONY’S
PRIVACY POLICY POSTED ON THE SITE, AND ANY
ADDITIONAL TERMS AND CONDITIONS OF USE SET
FORTH IN ANY PORTION OF THE SERVICE AND SITE
(COLLECTIVELY THE “AGREEMENT”). IF YOU DO NOT
AGREE WITH THE TERMS AND CONDITIONS OF THIS
AGREEMENT, SONY DOES NOT GRANT THE LIMITED
RIGHTS HEREIN, AND PLEASE DO NOT USE THE
SERVICE, PRODUCT, SOFTWARE, AND/OR SITE.
Use of Software. You may use the Software in conjunction with
the Product for personal use.
Limitation on Reverse Engineering, Decompilation and
Disassembly. You may not modify, reverse engineer,
decompile, or disassemble the Software in whole or in part.
Separation of Components. The Software is licensed as a single
product. Its component parts may not be separated for use on
more than one device unless expressly authorized by Sony.
Data Files. The Software may create data files automatically for
use with the Software. Any such data files will be deemed as part
of the Software.
1. Ownership
The Software and all materials on the Service and/or Site,
including but not limited to images, software and text (the
“Content”) are protected by copyright under copyright law and
international conventions. You cannot use the Software, Service,
Product, Content, and Site except as specified herein. There may
be proprietary logos, service marks, and trademarks found on
this Service or Site. By making them available on the Service
and/or Site, Sony is not granting you any license to utilize those
proprietary logos, service marks, or trademarks. Any
unauthorized use of the Service, Site, Content or Software may
violate copyright laws, trademark laws, the laws of privacy and
publicity, and civil and criminal statutes. All title and copyright
in and to the Software or materials on the Service/Site and any
copies of the Software, are owned by Sony, its licensors, or
suppliers. All rights not specifically granted under this
Agreement are reserved by Sony, its licensors, and suppliers.
Rental. You may not rent or lease the Software.
Software Transfer. You may permanently transfer all of your
rights under this Agreement only as part of a sale or transfer of
Software accompanying the sale or transfer of your Product,
provided you retain no copies, transfer all of the Software
(including all copies, component parts, the media and printed
materials, all versions and any upgrades of the Software and this
Agreement), and the recipient agrees to the terms of this
Agreement.
Dependent Software. The software, network services or other
products other than Software upon which the Software’s
performance depends on might be interrupted or discontinued at
the discretion of the suppliers (software suppliers, service
providers or Sony).
2. Your Rights & Limited License
High Risk Activities. The Software is not fault-tolerant and is
not designed, manufactured or intended for use or resale as on-
line control equipment in hazardous environments requiring fail-
safe performance, such as in the operation of nuclear facilities,
aircraft navigation or communication systems, air traffic control,
direct life support machines, or weapons systems, in which the
failure of the Software could lead to death, personal injury, or
severe physical or environmental damage (“High Risk
The Service, Site, Software, Content, and Product are only for
your personal use. You are responsible for all your activities
hereunder, including all legal liability incurred from your use of
the Service or others who use the Service via your Product. You
may use the Service, Site, Software, Content and Product for
lawful purposes only. You may not distribute, exchange,
modify, sell, or transmit anything you may copy from the
Service or Site, including but not limited to any text, images,
audio, and video, for any business, commercial, or public
purpose. As long as you comply with the terms of this
Agreement, Sony grants you a non-exclusive, non-transferable,
limited right to enter, display, and use the Service, Site, and
Software as set forth in this Agreement. You agree not to
interrupt/disrupt or attempt to interrupt/disrupt the operation of
this Service, Site or Software in any way.
Activities”). Sony and its suppliers specifically disclaim any
express or implied warranty of fitness for High Risk Activities.
GNU General Public, Lesser General Public, & Other Licenses.
Notwithstanding terms in this Agreement, certain portions of the
Software are governed by the GNU Lesser General Public
License, Version 2.1 (LGPL), GNU General Public License
Version 2 (GPL), and other open source code licenses (“Open
Source Licenses”), copies of which are attached hereto and
incorporated herein. For such portions of the Software, to the
extent there is any conflict between this Agreement and the
Open Source Licenses, the Open Source Licenses shall govern
as applicable.
Certain Source Code Availability. Sony is making available the
source code of certain portions of the SOFTWARE per the GPL/
LGPL LICENSES. Please see http://www.sony.com/linux
for access to and instructions on obtaining such source code.
,continued
81
5. Changes to Service
10. DISCLAIMER OF WARRANTIES AND DAMAGES;
Sony reserves the right to discontinue one, some, or all of the
features of the Service you receive at any time at its discretion.
Sony may, at its discretion and from time to time change, add or
remove features and functionality, upgrade or modify the
Service, Site and/or Software without notice. You may, at
Sony’s discretion, receive messages regarding these changes and
new features/functionality. Any new text, content, file, data,
product, services, information, software, software tool or other
feature provided by Sony (through the network or by CD-ROM
or other means)(including, but not limited to, any update to
Software provided to you automatically pursuant to Section 3 of
this Agreement) will be subject to this Agreement; provided that,
if separate terms and conditions applicable to such feature are
provided to you, such terms and conditions shall apply to such
feature in priority to this Agreement.
LIMITATION OF LIABILITY
YOU UNDERSTAND THAT USAGE OF THE PRODUCT
AND SERVICE REQUIRES INTERNET SERVICE
PROVIDED BY YOU, FOR WHICH YOU ARE SOLELY
RESPONSIBLE. OPERATION OF THE PRODUCT AND/OR
SERVICE MAY BE LIMITED OR RESTRICTED
DEPENDING UPON THE CAPABILITIES OR TECHNICAL
LIMITATIONS OF YOUR INTERNET SERVICE.
YOUR USE OF THE SOFTWARE, SERVICE, PRODUCT,
CONTENT AND/OR SITE IS AT YOUR OWN RISK. THE
SOFTWARE, SERVICE, CONTENT AND SITE ARE
PROVIDED “AS IS” AND, TO THE FULLEST EXTENT
PERMISSIBLE BY LAW, SONY MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND
WHATSOEVER (1) FOR THE ACCURACY,
6. Confidentiality
You shall maintain the confidentiality of any information with
regard to the Product and Documentation that is provided under
this Agreement and is not publicly known. You agree not to
disclose such information to any third party without the prior
written consent.
MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT ASSOCIATED
WITH THE SERVICE, SITE, AND/OR SOFTWARE; (2)
THAT THE SERVER(S) THAT MAKES THE SERVICE,
SOFTWARE, AND/OR SITE AVAILABLE ARE FREE OF
VIRUSES OR OTHER COMPONENTS THAT MAY
INFECT, HARM, OR CAUSE DAMAGE TO YOUR
COMPUTER, TELEVISION, OTHER EQUIPMENT, OR
ANY OTHER PROPERTY. FURTHERMORE, SONY DOES
NOT WARRANT OR MAKE ANY REPRESENTATIONS
REGARDING THE USE OR THE RESULTS OF THE USE OF
THE SOFTWARE, SERVICE, AND/OR SITE IN TERMS OF
ITS CORRECTNESS, ACCURACY, RELIABILITY, OR
OTHERWISE. NO ORAL OR WRITTEN INFORMATION
OR ADVICE GIVEN BY SONY OR A SONY AUTHORIZED
REPRESENTATIVE SHALL CREATE A WARRANTY OR
IN ANY WAY INCREASE THE SCOPE OF THIS
7. Export Control
You agree not to export from anywhere the Software or thereof
provided to you except in compliance with, and with all licences
and approvals required under, applicable export laws, rules and
regulations.
8. Sony’s Right to Terminate or Modify Terms or
Conditions of this Agreement
Sony may add to, change, or remove any part, term, or condition
of this Agreement at any time, without prior notice. Any changes
to this Agreement or any terms posted on the Service and/or Site
apply as soon as they are posted. By continuing to use the
Service, Product, Software and/or Site after any changes are
posted, you are indicating your acceptance of those changes.
SONY MAY ADD, CHANGE, DISCONTINUE, REMOVE,
OR SUSPEND ANY OTHER CONTENT POSTED ON THE
SERVICE AND/OR SITE, INCLUDING FEATURES AND
SPECIFICATIONS OF PRODUCTS DESCRIBED OR
DEPICTED ON THE SERVICE AND/OR SITE,
WARRANTY. SHOULD THE SOFTWARE, SERVICE, AND/
OR SITE PROVE DEFECTIVE YOU (AND NOT SONY OR
A SONY AUTHORIZED REPRESENTATIVE) ASSUME
THE ENTIRE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
UNDER NO CIRCUMSTANCES, INCLUDING BUT NOT
LIMITED TO SONY’S NEGLIGENCE OR ISSUES
TEMPORARILY OR PERMANENTLY, AT ANY TIME,
WITHOUT NOTICE AND WITHOUT LIABILITY.
WITHOUT PREJUDICE TO ANY OTHER RIGHTS, SONY
MAY SUSPEND OR TERMINATE THIS AGREEMENT
IMMEDIATELY UPON NOTICE IF YOU FAIL TO
COMPLY WITH THE TERMS AND CONDITIONS OF THIS
AGREEMENT. Upon termination, you shall destroy the
Software within fourteen (14) days after the date of such
termination, and upon Sony’s request, provide Sony with the
certification of such destruction. Sony may take any legal and
technical remedies to prevent the violation of and/or to enforce
this Agreement, including without limitation, immediate
termination of your access to the Service if we believe in our
discretion you are violating this Agreement.
RELATED TO THIRD PARTY CONTENT PROVIDERS,
SHALL SONY BE LIABLE FOR ANY CONSEQUENTIAL,
DIRECT, INCIDENTAL, INDIRECT, PUNITIVE, OR
SPECIAL DAMAGES RELATED TO (A) THE USE OF, (B)
THE INABILITY TO USE, OR (C) ERRORS OR OMISSIONS
IN THE SOFTWARE, SERVICE, PRODUCT, AND/OR SITE,
EVEN IF SONY OR AN AUTHORIZED REPRESENTATIVE
THEREOF HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF CONSEQUENTIAL OR
INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU. IN NO
EVENT SHALL SONY’S TOTAL LIABILITY TO YOU FOR
ALL DAMAGES, LOSSES, AND CAUSES OF ACTION
(WHETHER IN CONTRACT OR TORT, INCLUDING, BUT
NOT LIMITED TO, NEGLIGENCE OR OTHERWISE)
EXCEED THE AMOUNT PAID FOR THE PRODUCT.
9. Indemnification
You agree to indemnify, defend, and hold Sony and all of its
agents, directors, employees, information providers, licensors
and licensees, affiliates, content providers, officers, and parent
(collectively, “Indemnified Parties”), harmless from and against
any and all liability and costs (including, without limitation,
attorneys’ fees and costs), incurred by the Indemnified Parties in
connection with any claim arising out of (i) any breach or alleged
breach by you of this Agreement in any manner, (ii) any
information you submit to Sony hereunder, (iii) any breach or
alleged breach by you of a third party’s rights or (iv) any damage
caused by or alleged to have been caused by you to the Service.
You will cooperate as fully as reasonably required in
Indemnified Party(s) defense of any claim. Sony and/or
Indemnified Parties reserve the right, at its own expense, to
assume the exclusive defense and control of any matter
otherwise subject to indemnification by you and you shall not in
any event settle any matter without the written consent of Sony
and/or Indemnified Parties.
SOME STATES, TERRITORIES AND COUNTRIES DO NOT
ALLOW CERTAIN WARRANTY EXCLUSIONS, SO TO
THAT EXTENT THE ABOVE DISCLAIMER AND
LIMITATION OF LIABILITY MAY NOT APPLY TO YOU.
THE TERMS OF THIS DISCLAIMER DO NOT AFFECT OR
PREJUDICE YOUR STATUTORY RIGHTS AS
CONSUMER, NEITHER DO THEY LIMIT OR EXCLUDE
ANY LIABILITY FOR DEATH OR PERSONAL INJURY
CAUSED BY THE NEGLIGENCE OF SONY OR ANY
OTHER LIABILITY IF AND TO THE EXTENT THAT IT
CANNOT BE LIMITED OR EXCLUDED BY APPLICABLE
LAW .
82
11. General Provisions
This Agreement, the limited warranty accompanying the
Product, plus any additional terms posted on the Service or Site,
together constitute the entire agreement between Sony and you
with respect to your use of the Product, Service, Site, Content,
and Software. Any notice by Sony hereunder may be made by
letter, email, or posting on the Service or Site. Any cause of
action you may have with respect to your use of this Site must be
commenced within one (1) year after the claim or cause of action
arises. If for any reason a court of competent jurisdiction finds
any provision of this Agreement, or portion thereof, to be
unenforceable, that provision shall be enforced to the maximum
extent permissible so as to affect the intent of this Agreement,
and the remaining terms and conditions of the Agreement shall
continue in full force and effect. This Agreement shall be
governed by and construed in accordance with the laws of Japan.
Glossary
AACS
“Advanced Access Content System” is a
specification for managing digital
entertainment contents stored on the next
generation of prerecorded and recorded
optical media. The specification enables
consumers to enjoy digital entertainment
content, including high-definition content.
AVCHD (page 76)
The AVCHD format is a high definition
digital video camera format used to record
SD (standard definition) or HD (high
definition) signals of either the 1080i
*1
*2
specification or the 720p specification on
DVDs, using efficient data compression
coding technology. The MPEG-4 AVC/
H.264 format is adopted to compress video
data, and the Dolby Digital or Linear PCM is
used to compress audio data. The MPEG-4
AVC/H.264 format is capable of
compressing images at higher efficiency than
that of the conventional image compression
format. The MPEG-4 AVC/H.264 format
enables a high definition (HD) video signal
shot on a digital video camera recorder to be
recorded on DVDs in the same way as for a
standard definition (SD) television signal.
*1
A high definition specification that utilises 1080
effective scanning lines and the interlace format.
A high definition specification that utilises 720
*2
effective scanning lines and the progressive
format.
BD-J application
The BD-ROM format supports Java for
interactive functions.
“BD-J” offers content providers almost
unlimited functionality when creating
interactive BD-ROM titles.
BD-R (Blu-ray Disc Recordable) is a
recordable, write-once Blu-ray Disc,
available in the same capacities as the BD
below. Since contents can be recorded and
cannot be overwritten, a BD-R can be used to
archive valuable data or storing and
distributing video material.
,continued
83
BD-RE (page 74)
Dolby Digital Plus (page 77)
BD-RE (Blu-ray Disc Rewritable) is a
recordable and rewritable Blu-ray Disc,
available in the same capacities as the BD
below. The re-recordable feature makes
extensive editing and time-shifting
applications possible.
Developed as an extension to Dolby Digital,
the audio coding technology supports 7.1
multi-channel surround sound.
Dolby TrueHD (page 77)
Dolby TrueHD is a lossless coding
technology that supports up to 8 channels of
multi-channel surround sound for the next
generation optical discs. The reproduced
sound is true to the original source bit-for-bit.
BD-ROM (page 74)
BD-ROMs (Blu-ray Disc Read-Only
Memory) are commercially produced discs
and are available in the same capacities as the
BD below. Other than conventional movie
and video contents, these discs have
enhanced features such as interactive content,
menu operations using pop-up menus,
selection of subtitle display, and slideshow.
Although a BD-ROM may contain any form
of data, most BD-ROM discs will contain
movies in High Definition format, for
playback on Blu-ray Disc/DVD players.
DTS-HD High Resolution Audio (page 77)
Developed as an extension to DTS Digital
Surround format. It supports a maximum
sampling frequency of 96 kHz, and 7.1 multi-
channel surround.
DTS-HD High Resolution Audio has a
maximum transmission rate of 6 Mbps, with
lossy compression (Lossy).
DTS-HD Master Audio (page 77)
DTS-HD Master Audio has a maximum
transmission rate of 24.5 Mbps, and uses
lossless compression (Lossless), and DTS-
HD Master Audio corresponds to a maximum
sampling frequency of 192 kHz, and
maximum of 7.1ch.
Blu-ray Disc (BD) (page 74)
A disc format developed for recording/
playing high-definition (HD) video (for
HDTV, etc.), and for storing large amounts of
data. A single layer Blu-ray Disc holds up to
25 GB, and a dual-layer Blu-ray Disc holds
up to 50 GB of data.
HDMI (High-Definition Multimedia
Interface) (page 17)
Deep Colour (page 53)
These are video signals for which the colour
depth of signals passing through an HDMI
jack have been enhanced. With a Non-Deep
Colour-compatible player, the number of
colours 1 pixel can express is 8 bits per
component video signal (Y, PB/CB, PR/CR)
(24 bits/16,777,216 colours). However, with
a Deep Colour-compatible player, 1 pixel can
express more bits, such as 12 bits per
component video signal (Y, PB/CB, PR/CR)
(36 bits). With more bits, the gradation of
colour depth can be expressed more finely,
and continuous colour changes will be
displayed more smoothly.
HDMI is an interface that supports both video
and audio on a single digital connection. The
HDMI connection carries standard- to high-
definition video signals and multi-channel
audio signals to AV components such as
HDMI equipped TVs, in digital form without
degradation.
The HDMI specification supports HDCP
(High-bandwidth Digital Contents
Protection), a copy protection technology for
digital entertainment contents for HDMI.
Sony-developed technology provides real-
time parsing pixel-by-pixel, performs
optimum smoothing, clarifies details,
removes noise and achieves smoother
gradation in video signals during playback.
The “Digital Living Network Alliance” is a
non-profit organization that formulates
DLNA Interoperability Guidelines for
sharing digital content via a network.
For details, visit the following website:
LTH (Low to High) (page 75)
LTH is a recording system that supports
organic pigment type BD-R.
84
PhotoTV HD (page 46)
24p True Cinema (page 52)
Movies shot with a film camera consist of 24
frames per second.
“PhotoTV HD” allows for a highly-detailed
pictures, and photo-like expression of subtle
textures and colours. By connecting Sony
“PhotoTV HD” compatible devices using an
HDMI cable, whole new world of photos can
be enjoyed in breathtaking Full HD quality.
For instance, the delicate texture of the
human skin, flowers, sand and waves can
now be displayed on a large screen in
beautiful photo-like quality.
Since conventional televisions (both CRT
and flat panels) display frames either at 1/60
or 1/50 second intervals, the 24 frames do not
appear at an even pace.
When connected to a TV with 24p
capabilities, the player displays each frame at
1/24 second intervals — the same interval
originally shot with the film camera, thus
faithfully reproducing the original cinema
image.
Pop-up menu (page 38)
An enhanced menu operation available on
BD-ROMs. The pop-up menu appears when
POP UP/MENU is pressed during playback,
and can be operated while playback is in
progress.
Super Bit Mapping (page 53)
It is possible to achieve smoother gradation
by putting 14 bits of information into an 8-bit
video signal. This Sony-developed
technology takes into account human vision
characteristics.
The Wi-Fi Protected Setup specification
easily sets the security of wireless home
networks.
There are 2 ways to use the Wi-Fi Protected
Setup function:
– The Push Button Configuration method,
using the WPS button on the wireless LAN
router (access point)
– The PIN method, using a PIN code
x.v.Colour (page 53)
x.v.Colour is a familiar term for the xvYCC
standard proposed by Sony.
xvYCC is an international standard for colour
space in video.
This standard can express a wider colour
range than the currently used broadcast
standard.
85
D
O
Index
“OSD” 61
“Dimmer” 61
Disc Lock 37
DISPLAY 11
Words in quotations appear
in the on-screen displays.
P
Numerics
24p True Cinema 85
“Photo” 44
“Photo Settings” 61
Play information 40
Playable discs 74
A
DVD 74
AACS 83
ANGLE 10
AUDIO 10
E
“Audio Output Priority”
Audio output signals 77
“Auto Power Off” 62
Enter characters 65
Q
“Quick Start Mode” 61
R
Region code 75
“Resetting” 68
Resetting the player 68
F
B
Freeze frame 11
Front panel display 13
Batteries 29
“BD Data” 39
“BD/DVD Viewing
Settings” 59
H
HD Audio 77
S
“HD Reality Enhancer
“Headphones Type” 42
Home menu 48
Self-diagnosis function 73
“Setup” 48
Bitstream 70
Slow-motion play 11
BONUSVIEW 38
“Speaker Settings” 54
SUBTITLE 10
SURROUND 42
System Power-Off 18
“System Settings” 61
C
L
CD 74
Language Follow 18
LTH 84
“Chapter Search” 40
Colour buttons 11
Connecting
M
AV amplifier
(receiver) 21
TV 16
T
MAC address 62
MULTI CHANNEL
“Music” 43
“Title Search” 40
Troubleshooting 69
“TV Type” 50
N
“Network Settings” 63
86
|