Ve h i c l e K i t
Installation & User Guide
Table of Contents
Table of ConTenTS
.
.
.
.
3
WaRnIng and SafeTy InfoRmaTIon
4
. 4
. 4
. 5
. 6
FCC Caution .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
FCC Interference Statement .
Safety Precautions.
Warnings
.
.
.
.
.
.
.
.
.
.
.
.
PaCKage ConTenTS
ConTRolS
Vehicle Dock .
7
.
.
.
.
9
. 9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Remote Control Reference Guide.
. 11
. 15
Remote Control Battery Installation .
InSTallaTIon
Installing the Vehicle Kit.
Installing the Antenna
16
. 16
. 21
. 24
. 25
. 26
. 26
. 39
. 42
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Connecting the Cigarette Lighter Adapter
Docking and Un-docking the Stiletto
Maximizing Audio Quality From Your Stiletto Radio .
Wireless Connection
Direct Connections .
Subscribing to the SIRIUS Service .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
oPeRaTIon
Presets
Direct Channel Tuning .
Jump Feature . .
43
. 43
. 44
. 45
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
TRoUbleShooTIng
46
47
48
49
50
51
oPTIonal aCCeSSoRIeS
WaRRanTy
SPeCIfICaTIonS
CoPyRIghTS & TRademaRKS
SIRIUS Id
[ Table of Contents ]
ꢀ
Warning and Safety Information
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct the interference by one
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
— Consult the dealer or an experienced radio/TV technician for help.
[ Warning and Safety Information ]
ꢁ
Safety Precautions
Be sure to observe the following warnings. Failure to follow these safety instructions and
warnings may result in a serious accident and/or personal injury.
• Installation must be performed according to this installation guide. SIRIUS is not respon-
sible for issues arising from installations not performed according to the procedures in this
guide.
• Do not operate the SIRIUS radio in a way that might divert your attention from driving
safely. As a driver, you alone are responsible for safely operating your vehicle in accor-
dance with traffic safety laws at all times.
• Do not install the unit where it may obstruct your view through the windshield, or of your
vehicle’s indicator displays.
• Do not install the unit where it may hinder the function of safety devices such as an airbag.
Doing so may prevent the airbag from functioning properly in the event of an accident.
• To avoid short circuits, do not open the unit, and never put or leave any metallic objects
(coins, tools, etc.) inside the unit.
• If the unit emits smoke or unusual odors, turn the power off immediately, and disconnect
the unit from any power source.
• Do not drop the unit or subject it to strong shocks.
• The installation and use suggestions contained in this installation manual are subject
to any restrictions or limitations that may be imposed by applicable law. The purchaser
should check applicable law for any restrictions or limitations before installing and/or
operating this unit.
• Do not install the FM Extender Cable where it will hinder or block your view. In some
states it may be illegal to mount it on the windshield of your vehicle. Check applicable law
for any restrictions or limitations before installing the extender cable on your windshield.
• Do not install the FM Extender Cable where it may hinder the function of safety devices
such as an airbag. Doing so may prevent the airbag from functioning properly in the event
of an accident.
[ Warning and Safety Information ]
ꢂ
Warnings
notice To drivers In California and minnesota
State law prohibits drivers in California and Minnesota from using suction mounts on their
windshields while operating motor vehicles. Other dashboard or friction mounting options
should be used. SIRIUS does not take any responsibility for any fines, penalties, or damages
that may be incurred as a result of disregarding this notice. (See California Vehicle Code Sec-
tion 26708(a); Minnesota Statutes 2005, Section 169.71)
operating Temperature
The SIRIUS Cigarette Lighter Adapter is designed to operate between -20° to +85° C (-4° to
+185° F). Avoid leaving it in a vehicle or elsewhere where the temperature may fall outside
this range.
Cleaning and maintenance
If the vehicle dock becomes dirty, turn the power off and wipe it clean with a soft cloth. Do
not use hard cloths, strong cleaning fluids, paint thinner, alcohol, or other volatile solvents to
clean. These may cause damage to the unit.
Cigarette lighter adapter
The vehicle dock cannot be powered directly from a vehicle’s 12 VDC power system. It must
be powered using the included Cigarette Lighter Adapter only. Connecting the vehicle dock
directly to the vehicle’s 12 VDC power system may result in damage to the vehicle dock or
SIRIUS radio, or both.
[ Warning and Safety Information ]
ꢃ
Package Contents
The following items are included with your purchase of the SIRIUS Stiletto Vehicle Kit.
Unpack the kit carefully and make sure that everything shown is present. If anything is missing
or damaged, or if the kit fails to operate properly, notify your dealer immediately. It is recom-
mended that you retain the original carton and packing materials in case you need to ship your
kit in the future.
mute
back
home
options
display
+
3
preset
1
tune
1
6
2
7
3
8
4
9
5
0
2
5
8
0
4
7
6
9
preset
tune
jump
jump
FM
Vehicle dock
Vehicle mounts
Vehicle dock
Remote Control
finger grip
magnetic
antenna
antenna
Cover/Tail
mounting
Screws
Cigarette lighter
alcohol Swab
adapter
[ Package Contents ]
ꢄ
fm extender Cable
Suction Cups (2)
Self adhesive
Cable guides (3)
[ Package Contents ]
ꢅ
Controls
Vehicle Dock
Figure 1 and the table following identify and describe the buttons, connectors, and features of
the vehicle dock.
Lock
Direct Entry Tune/
Preset Buttons
1
6
2
7
3
8
4
9
5
0
FM
Tune
Preset
Jump
preset
tune
jump
Preset Mode Indicator
Tune Mode Indicator
IR Remote
Sensor
FM OUT
DC5V
LINE OUT
ANT
figure 1
[ Controls ]
ꢆ
Vehicle dock button and Connector descriptions
button/
Connector
action
description
In Tune Mode: Directly selects the channel indicted by the num-
bers which were pressed
0 – 9
tune
Press
Press
In Preset Mode: Selects presets 0 – 9
Changes to the direct tuning mode where channel numbers may
be entered
Changes to the preset mode and displays the list of preset
channels
preset
Press
The second and subsequent press cycles through the preset
banks, A, B, and C
Jumps to a preselected traffic/weather channel
jump
Press
Press
A second press returns to the previous channel or song/show
Displays the FM Frequency screen where the FM transmitter
frequency can be selected, or an FM preset selected using the
0 – 9 buttons
fm
lock
fm oUT
dC 5V
Toggle Secures the Stiletto in the vehicle dock
This connection is used for the FM Extender Cable (or optional FM Direct
Adapter which directly connects to the vehicle’s FM radio antenna input)
Connection for the Cigarette Lighter Adapter
Audio output for direct connection to the vehicle’s audio system. An audio
cable (not supplied) is required to utilize this connection
lIne oUT
anT
Connection for the Magnetic Antenna
[ Controls ]
10
Remote Control Reference Guide
Figure 2 and the table following identify and describe the buttons of the remote control. The
remote control works when the Stiletto is in the vehicle dock.
mute
Power
Mute
back
home
Back
Media Dial (CCW)
Rewind
Home
Select
Fast-Forward
Media Dial (CW)
Options
options
display
Display
Rewind
Love
Fast-Forward
Play/Pause
+
3
Volume
preset
1
tune
Preset
Tune
2
5
8
0
Numeric
Keypad
4
7
6
9
jump
FM
Jump
FM
figure 2
[ Controls ]
11
Remote Control button descriptions
Satellite Radio
environment
Internet Radio
environment
Replay/library
environment
button
action
Press
Press
Turns the Stiletto On/Off
Power
mute
Mutes (or un-mutes) the audio
Pressing Up is equivalent to turning the Media Dial counter-clockwise
Pressing Down is equivalent to turning the Media Dial clockwise
If listening, displays channel or category list
Press
Press
Up/down
If in a list, menu, or prompt, scrolls to next or previous item
Pressing Right is equivalent to Fast-Forward
Pressing Left is equivalent to Rewind
left/Right
Press
Press
Selects highlighted item in a list, menu, or prompt
Select
Returns back to the screen displayed just prior to the currently
displayed screen
back
home
First press returns to the Home screen
Press
Press
Additional press returns to the Now Playing screen
Displays available options for the currently displayed screen
If no options are available, nothing is displayed
options
[ Controls ]
12
Remote Control button descriptions Continued
button
Satellite Radio
environment
Internet Radio
environment
Replay/library
environment
action
Cycles between 3-channel display mode, 6-channel display
mode, artist name, and song title when in the channel browsing
mode
Press
display
If playing, mutes
audio
Pauses a broadcast
or resumes playing
a paused broadcast
Pauses or resumes
playing the current
song or show
Press
If muted, resumes
playing
Play/Pause
If listening, rewinds
a broadcast to the
previous song or
show
If listening and
muted, resumes
playing
Skips to the begin-
ning of the song or
show
Press
Hold
If in a channel or
preset list, moves
through categories
or preset banks
If in a channel or
category list, moves
through channel
categories
Rewind
If listening, rewinds
through a broadcast
Rewinds through
song or show
If listening, fast-for-
wards in the replay
buffer to the next
song or show
If listening and
muted, resumes
playing
Skips to the next
song or show
Press
If in a channel or
preset list, moves
through categories
or preset banks
If in a channel or
category list, moves
through channel
categories
fast-forward
Fast-Forwards
through the replay
buffer
Fast-Forwards
through song or
show
Hold
[ Controls ]
1ꢀ
Remote Control button descriptions Continued
button
Satellite Radio
environment
Internet Radio
environment
Replay/library
environment
action
Saves the song or
show if possible,
or adds to favorites
when song/show
cannot be saved
Press
While recording,
prompts to stop
recording
Adds the artist/song to the favorites list
love
Displays recording
setup screen
Hold
While recording,
prompts to stop
recording
+ increases the audio volume
+/–
Press
Press
— decreases the audio volume
Volume
Changes to the preset mode and displays the list of preset chan-
nels
preset
A second and subsequent press cycles through the preset
banks, A, B, and C
Changes to the direct tuning mode where channel numbers may
be entered
tune
0 - 9
Press
Press
In Tune Mode: Directly selects the channel indicted by the num-
bers which are pressed
In Preset Mode: Selects presets 0–9
[ Controls ]
1ꢁ
Remote Control button descriptions Continued
button
Satellite Radio
environment
Internet Radio
environment
Replay/library
environment
action
Jumps to a preselected traffic/weather channel
jump
Press
A second press returns to the previous channel or song/show
Displays the FM Frequency screen where the FM transmitter
frequency can be selected, or an FM preset selected using the
0–9 buttons
FM
Press
fm
Remote ContRol BatteRy InstallatIon
To install the remote control battery, locate the battery drawer on the bottom edge. Open
the battery drawer by holding the latch tab to the right and sliding the drawer out as shown
in Figure 3. Place the battery in drawer with the + side of the battery facing up and slide the
drawer back into the remote control.
+
Latch Tab
figure 3
Latch Tab
[ Controls ]
1ꢂ
Installation
SIRIUS suggests professional installation of this product in your vehicle. Professional instal-
lation provides an experienced technician to install this product in your vehicle, advice for
selecting a suitable mounting location, installation of the antenna, and routing all the neces-
sary wires and cables. An installer will have the necessary audio connection accessories to
provide optimal audio output of the SIRIUS radio directly to your vehicle’s audio system. Ask
your SIRIUS retailer if they provide professional installation services, or can recommend a
professional installation service.
Installing the Vehicle Kit
When installing the vehicle dock, choose a location in your vehicle where the radio will not
block your vision, interfere with the vehicle controls, or obstruct the air bag. The location
should be easily accessible and provide good visibility of the display, and should not be
located where it will be in direct sunlight which will affect the visibility of the display screen.
FM
The left side of the vehicle dock which has the Lock and
obstructed.
FM buttons should also not be
The mounting accessories necessary to install the vehicle dock in a vehicle are provided.
Figure 4 shows two examples of the Stiletto mounted in a vehicle: A is the console mount
method using the adhesive mount, and B is the vent mount method.
[ Installation ]
1ꢃ
B.
back
home
option
s
display
1
6
2
7
3
8
4
9
5
0
prese
t
tune
jump
back
home
option
s
display
1
6
2
7
3
8
4
9
5
0
prese
t
tune
A.
jump
figure 4
Depending upon the mounting method you select, the mount should be assembled as
described in one of the following two sections. In choosing a mounting location, be sure that
FM
position chosen will not block access to the Lock and
vehicle dock.
FM buttons on the side of the
Console mount method (a)
To assemble and mount the vehicle dock for the console mount method A as shown in Figure
4:
1. Attach the adhesive foot to the vehicle dock using the provided screws, placing the
finger grip between the adhesive foot and the vehicle dock. (Figure 5)
2. Before adhering the mount to the console, be sure to select your mounting position care-
fully because once the mount has been adhered to a surface, it will not be possible to
remove it and adhere it again.
3. Clean the selected mounting surface area in the vehicle with the alcohol swab.
4. Unscrew the adhesive foot from the mounting bracket. Peel the protective material off
the adhesive on the foot and press the foot firmly against the vehicle surface.
5. The adhesive mount should then be allowed to adhere for a minimum of 2-4 hours before
use. Best adhesion occurs after 24 hours. When the adhesive foot has achieved suf-
ficient adhesion, reattach the vehicle dock to the foot.
[ Installation ]
1ꢄ
Adhesive Mounting Finger Vehicle
Foot Bracket Grip Dock
figure 5
[ Installation ]
1ꢅ
Vent mount method (b)
To assemble and mount the vehicle dock for the vent mount method B as shown in Figure 4:
1. Assemble the vent mount clip as shown in Figure 6. Note that the lower arm may be at-
tached in two different positions. You should assemble the vent clip in the configuration
that works best in your particular vehicle. Figure 6 illustrates both possible configura-
tions of the vent clip.
2. Attach the vent clip to the vehicle dock using the provided screws, placing the finger
grip between the vent clip and the vehicle dock. (Figure 7)
3. Slide the vent clip portion of the mount into a vent in your vehicle, insuring that one of
the vent louvers slides between the upper and lower portions of the two clip arms, and
hooks the rear of the louver.
figure 6
[ Installation ]
1ꢆ
Vent Clip Finger Vehicle
Grip
Dock
Clip Arms
figure 7
[ Installation ]
20
Installing the Antenna
The optimum mounting location for the magnetic antenna is on the roof of the vehicle, with a
minimum unobstructed area of 12 inches by 12 inches, and exactly 6½ inches from the rear
roof edge of the vehicle (the length of the rubber antenna cable cover/tail). It is important to
avoid any obstructions that will block the SIRIUS signal, obstructions such as a roof rack,
a sunroof, roof mounted cargo containers, or other antennas. For convertible vehicles, the
antenna should be installed on the trunk lid.
For best performance, it is recommended that the antenna be installed with the rubber
antenna cable cover/tail. This rubber antenna cable cover/tail provides two benefits: first, it
positions the antenna the recommended distance from the rear window, rear door/hatch, or
trunk edge to give the antenna the best view of the sky. Secondly, it conceals and protects
the exposed antenna cable. The rubber antenna cable cover/tail has adhesive strips that hold
it securely in place.
The following illustrations show the recommended mounting locations of the antenna for
several types of vehicles. (Figure 8) Follow these recommendations for best performance from
the antenna.
figure 8
Sedan/Coupe. Mount the antenna along the rear center-line of the vehicle roof, located at the
rear of the roof near the rear window.
Pickup Truck. Mount the antenna along the rear center-line of the cab roof, located at the
rear of the roof near the rear window.
SUV/Mini-Van. Mount the antenna along the rear center-line of the vehicle roof, located at the
rear of the roof near the rear door/hatch.
[ Installation ]
21
Convertible. Mount the antenna along the center-line of the trunk lid, with the rubber antenna
cable cover/tail directed toward the rear window.
When you have selected a suitable mounting location, clean the area where the antenna and
rubber antenna cable cover/tail will be mounted with the supplied alcohol swab.
Protective
Strips
Strain
Relief
Adhesive
Rubber Antenna
Cover/Tail
Cable
figure 9
figure 10
Connect the rubber antenna cable cover/tail to the antenna cable, making sure that the strain-
relief on the antenna sits into the rubber antenna cable cover/tail groove. (Figure 9) Route the
antenna cable through the wire channel in the rubber antenna cable cover/tail. Do not remove
the protective strips yet.
Temporarily position the antenna and rubber antenna cable cover/tail in the selected mounting
area and route the cable from the antenna to the vehicle’s interior by tucking it underneath the
rubber molding around rear window, as shown in Figure 10.
Route the cable from the lowest point of the rear window into the trunk. Take advantage of
any existing cable channels or wiring conduits. For SUVs, mini-vans and 5-door vehicles, bring
the cable into the vehicle under the rubber molding for the tailgate, and continue under the
interior trim.
From the trunk, or rear of the vehicle, route the cable around the passenger compartment and
to the front of the vehicle, to the radio. Take care not pull the cable across sharp edges that
could damage it, and keep it away from areas where it might entangle feet. Coil any excess
[ Installation ]
22
antenna cable in a location where it can be hidden. Connect the antenna cable to the ANT
connection at the rear of the vehicle dock. (Refer to Figure 12 on page 24 for the location of
this connector.)
figure 11
Once the antenna cable is routed through the vehicle, and you are satisfied with the cable
routing, peel the protective material from the adhesive strips and press the rubber antenna
cable cover/tail firmly into place on the vehicle. Double check that the location of the antenna
and rubber antenna cable cover/tail are correct, and continue to press firmly down on rub-
ber antenna cable cover/tail for another 30 seconds. (Figure 11) At room temperature (68
degrees), maximum adhesion usually occurs within 72 hours. During this period, avoid car
washes and other contact with the antenna and rubber antenna cable cover/tail.
[ Installation ]
2ꢀ
Connecting the Cigarette Lighter Adapter
Connect the provided cigarette lighter adapter to the DC5V connection at the rear of the
vehicle dock. (Figure 12)
FM OUT
DC5V
LINE OUT
ANT
figure 12
Do not use any other power adapter for the vehicle dock, or connect it directly to the vehicle’s
power. Doing so will damage the vehicle dock and the Stiletto. Using anything other than the
supplied cigarette lighter adapter to power the vehicle dock will void the warranty.
[ Installation ]
2ꢁ
Docking and Un-docking the Stiletto
When docking the Stiletto, be sure the Lock button of the vehicle dock is in the unlocked
position. (Refer to Figure 1 on page 9 for the location of the Lock button.) Grasp the vehicle
dock with your free hand and place the Stiletto into the vehicle dock, as shown in Figure
13, and slide it down until it is fully seated. Place the Lock button into the locked position to
secure the Stiletto in the vehicle dock.
To remove the Stiletto from the vehicle dock place the Lock button in the unlocked position.
Grasp the vehicle dock with your free hand and pull the Stiletto up until it disengages from
the vehicle dock.
Satellite Radio
Internet Radio
Library
back
home
options
display
1
6
2
7
3
8
4
9
5
0
preset
tune
jump
figure 13
[ Installation ]
2ꢂ
Maximizing Audio Quality From Your Stiletto Radio
There are two primary ways to connect your SIRIUS radio to your vehicle radio: Wireless
Connection or Direct Connection. The following sections will help you obtain the best perfor-
WIReless ConneCtIon
Your SIRIUS radio contains an FM transmitter. The FM transmitter sends the audio from your
SIRIUS radio to your vehicle radio. (Figure 14)
90.1
figure 14
Included with your SIRIUS radio is an FM Extender Cable to maximize the audio quality of
your SIRIUS radio when using a wireless audio connection. Should the wireless audio quality
without the FM Extender Cable be not acceptable, you can try using the FM Extender Cable
(or opt for a direct connection).
Wireless audio Connection Without the fm extender Cable
To tune your vehicle’s FM radio and your SIRIUS radio to the same FM channel (Figure 14):
1. Turn off your Stiletto and tune through the FM channels on your vehicle’s FM radio to
locate an FM channel that is not broadcasting in your area. If you use an FM channel
that is being used by a local broadcaster, it will interfere with the performance of your
SIRIUS radio. Once you have located an FM channel that is not broadcasting in your
area, save it as a preset on your vehicle radio. This will become your SIRIUS preset.
FM
2. Power the Stiletto on. When it is completely powered up, press the
FM button on
[ Installation ]
2ꢃ
the left side of the vehicle dock or press the FM button on the remote control.
3. Use the Media Dial or the buttons on the remote control to select the same FM
channel. (Figure 15) Press and hold a preset number (0—9) on the vehicle dock in which
you want to store the selected FM channel as a preset. (Figure 16) Press the Select
button to exit and transmit on the selected FM channel. The Stiletto will transmit on the
selected FM channel.
FM Transmit
FM Transmit
Turn the Media Dial to
change the frequency.
Turn the Media Dial to
change the frequency.
Use the number keys to
recall or assign FM presets
Use the number keys to
recall or assign FM presets
90.1
90.1
FM1
figure 15
figure 16
note: The FM transmitter in your SIRIUS radio is automatically set to FM channel 88.1.
This may not be the best channel in your area.
Tip: If you regularly travel between cities with different active FM channels, you may
need to find channels that are not broadcasting in each city. The Stiletto can store mul-
tiple FM transmit channels as presets, so you can easily switch to the best FM channel
for each city. You will also want to set the FM channels that are not broadcasting in
each city as presets on your vehicle radio.
You should now hear the audio from your SIRIUS radio over your vehicle’s FM radio. If the
audio quality is not satisfactory, you should install the FM Extender Cable as described in the
following section (or use a direct connection as described on page 39).
Wireless audio Connection Using the fm extender Cable
Included with your SIRIUS radio is an FM Extender Cable to maximize the audio quality of your
SIRIUS radio when using a wireless audio connection. Proper placement of the FM Extender
Cable inside your vehicle in close proximity to the vehicle’s own FM antenna will provide
[ Installation ]
2ꢄ
a strong FM signal for good reception. The FM Extender Cable has suction cup mounts or
permanent adhesive mounts for installing it on your vehicle’s window.
Because of the different types of FM antennas found in vehicles, and the varied locations of
the antenna in each vehicle, SIRIUS suggests professional installation of FM Extender Cable
in your vehicle. Ask your SIRIUS retailer if they provide professional installation services, or
can recommend a professional installation service.
The FM antennas found in vehicles are of four distinct types:
• Aerial Type Fender Mounted FM
Antenna: A fixed or retractable aerial
antenna located on the front or rear
fender of the vehicle.
• Aerial Type Roof Mounted FM An-
tenna: A fixed aerial antenna mounted
on the roof (often at the front or rear of
the roof, just above the window glass).
[ Installation ]
2ꢅ
• on Glass Type FM Antenna: Wires on
the window glass of the vehicle, usually
near the top of the window. It may be
located on the windshield glass, the rear
window glass, or a rear side window in
some SUV and mini-van type vehicles
(and other vehicles). It will look similar to
the rear window defroster wires found in
many vehicles.
• “Shark Fin” Type FM Antenna: A device
resembling a shark fin (or other shape)
located on the vehicle roof above the rear
window.
[ Installation ]
2ꢆ
Before attempting installation, you should verify the type and location of the FM antenna in
your particular vehicle. If you have trouble locating it, consult the manual which accompanied
your vehicle, consult a dealer for your type of vehicle, or consult a professional installer.
The FM Extender Cable should be placed inside the vehicle, as close as possible to the
vehicle’s FM antenna. A test mounting should be done first using the included suction cup
mounts to test the installation. Once an acceptable location has been found, you will remove
the suction cups and permanently adhere the FM Extender Cable using the adhesive mounts.
To install the FM Extender Cable in your vehicle, follow these instructions:
1. Attach the suction cups to the FM Extender Cable in the positions shown in Figure 17.
Suction Cups
figure 17
2. In this step, follow the specific instructions in sub-step a, b, c, or d depending on the
type of FM antenna in your vehicle:
a Installation Instructions for Vehicles with aerial Type fender mounted fm antenna
For vehicles where the FM radio antenna is located on the front fender, the FM
Extender Cable should be mounted vertically on the front windshield at the edge of
the glass nearest to the antenna. (Figure 18)
For vehicles where the FM radio antenna is located on the rear fender, the FM
Extender Cable should be mounted vertically on the rear window at the edge of the
glass nearest to the antenna. (Figure 19)
Attach the FM Extender Cable to the section of glass closest to the FM antenna in
a vertical orientation. (Figure 18 or Figure 19) The wire between the two suction
cups should be pulled taut and as straight as possible, and should not obstruct the
driver’s view.
[ Installation ]
ꢀ0
Important Caution: In some states it may not be legal to put the FM Extender
Cable on the windshield glass. In this case, the FM Extender Cable should be
mounted on the A-Pillar adjacent to the FM antenna.
Alternate mounting
location on adjacent
A-Pillar
figure 18
figure 19
[ Installation ]
ꢀ1
b Installation Instructions for Vehicles with aerial Type Roof mounted fm antenna
For vehicles where the FM radio antenna is located on the front or rear of the roof
of the vehicle, the FM Extender Cable should be mounted horizontally on the front
or rear glass below the FM antenna, or installed into the headliner of the vehicle
under the FM antenna.
• If you are installing the FM Extender Cable on the window glass, attach the suc-
tion cups to the glass under the FM antenna in a horizontal orientation. The wire
between the two suction cups should be pulled taut and as straight as possible,
and should not obstruct the driver’s view. (Figure 20)
• If you are installing the FM Extender Cable into the headliner, remove the suction
cups and tuck the wire into the headliner, stretched taut and straight, and cen-
tered under the FM antenna.
figure 20
[ Installation ]
ꢀ2
c Installation Instructions for Vehicles with on glass Type fm antenna
For vehicles where the FM radio antenna is located on the window glass, the FM
Extender Cable can be mounted horizontally on the glass, directly over the FM
radio antenna, or installed into the headliner of the vehicle directly above the FM
antenna.
• If you are installing the FM Extender Cable on the window glass, attach the suc-
tion cups to the glass centered over the FM radio antenna in a horizontal orienta-
tion. The wire between the two suction cups should be pulled taut and as straight
as possible, and should not obstruct the driver’s view. (Figure 21 & 22)
• If you are installing the FM Extender Cable into the headliner, remove the suction
cups and tuck the wire into the headliner, stretched taut and straight, and cen-
tered above the FM antenna.
figure 21
[ Installation ]
ꢀꢀ
figure 22
[ Installation ]
ꢀꢁ
d Installation Instructions for Vehicles with Shark fin Type fm antenna
For vehicles where the FM radio antenna is located on the rear of the roof of the
vehicle, the FM Extender Cable should be mounted horizontally on the glass below
the FM antenna, or installed into the headliner of the vehicle under the FM antenna.
• If you are installing the FM Extender Cable on the window glass, attach the suc-
tion cups to the glass below the FM antenna in a horizontal orientation. (Figure
23) The wire between the two suction cups should be pulled taut and as straight
as possible, and should not obstruct the driver’s view.
• If you are installing the FM Extender Cable into the headliner, remove the suction
cups and tuck the wire into the headliner, stretched taut and straight, and cen-
tered under the FM antenna.
figure 23
[ Installation ]
ꢀꢂ
3. Plug the FM Extender Cable into the FM OUT connector of your Stiletto vehicle dock.
(Figure 24)
FM OUT
From FM Extender Cable
figure 24
4. Tune your vehicle’s FM radio and your Stiletto to the same FM channel (Figure 25):
a. Turn off your Stiletto and tune through the FM channels on your vehicle’s FM
radio to locate an FM channel that is not broadcasting in your area. If you use
an FM channel that is being used by a local broadcaster, it will interfere with the
performance of your SIRIUS radio. Once you have located an FM channel that is
not broadcasting in your area, save it as a preset on your vehicle radio. This will
become your SIRIUS preset.
901
.
figure 25
[ Installation ]
ꢀꢃ
FM
b. Power the Stiletto on. When it is completely powered up, press the
FM
button on the left side of the vehicle dock or press the FM button on the remote
control.
c. Use the Media Dial or the
buttons on the remote control to select the same
FM channel. (Figure 26) Press and hold a preset number (0—9) on the vehicle dock
in which you want to store the selected FM channel as a preset. (Figure 27) Press
the Select button to exit and transmit on the selected FM channel. The Stiletto
will transmit on the selected FM channel.
FM Transmit
FM Transmit
Turn the Media Dial to
change the frequency.
Turn the Media Dial to
change the frequency.
Use the number keys to
recall or assign FM presets
Use the number keys to
recall or assign FM presets
90.1
90.1
FM1
figure 26
figure 27
note: The FM transmitter in your SIRIUS radio is automatically set to FM channel
88.1. This may not be the best channel in your area.
Tip: If you regularly travel between cities with different active FM channels, you
may need to find channels that are not broadcasting in each city. The Stiletto can
store multiple FM transmit channels as presets, so you can easily switch to the
best FM channel for each city. You will also want to set the FM channels that are
not broadcasting in each city as presets on your vehicle radio.
5. You should now hear the audio from your SIRIUS radio over your vehicle’s FM radio. If
the audio quality is not satisfactory, try moving the FM Extender Cable slightly to see if a
better signal can be obtained.
6. If you are mounting the FM Extender Cable in the headliner of the vehicle, skip this step.
When you are satisfied with the mounting location, remove the suction cup mounts and
peel the backing off the adhesive mounts. Permanently adhere it in the same position on
the glass (or A-Pillar), keeping it taut and as straight as possible. (Figure 28)
[ Installation ]
ꢀꢄ
Adhesive
Adhesive
figure 28
7. Route the antenna cable to your SIRIUS radio. Use the included self adhesive cable
guides (if necessary) to hold the antenna wire in place until it reaches the weather
stripping or moulding at the edge of the window. Take advantage of any existing cable
channels or wiring conduits and route the cable around the passenger compartment to
the vehicle dock. Take care not pull the cable across sharp edges that could damage it,
and keep it away from areas where it might entangle feet. Coil and secure any excess
antenna cable in a location where it can be hidden and secured.
8. Plug the FM Extender Cable into the FM OUT connector of your Stiletto vehicle dock
(Refer to Figure 24 on page 36.)
This completes the installation of the FM Extender Cable.
To assign additional FM channels as FM presets in your Stiletto:
FM
1. Press the
FM button on the left side of the vehicle dock or press the FM button
on the remote control.
2. Use the Media Dial or the
buttons on the remote control to select an FM channel.
3. Press and hold the preset number (0—9) in which you want to store the selected FM
channel. Repeat steps 2 and 3 to assign additional FM presets.
4. Press the Select button to exit and transmit on the selected FM channel, or press the
FM
FM button to simply exit.
If you’re not sure which FM channels are not broadcasting in your home or travel cities, you
on your zip code.
[ Installation ]
ꢀꢅ
DIReCt ConneCtIons
A direct connection provides better audio performance than a wireless connection and
removes the possibility of interference from local FM broadcasters. There are several ways to
directly connect your Stiletto which are explained in the following sections.
Tip: Depending on the model of radio in your vehicle and your level of comfort with in-car
installations, a direct connection may require professional installation assistance. Ask your
retailer or contact SIRIUS customer support for recommended installers in your area.
direct Wired audio Connection
If your vehicle radio offers an “AUX IN” or “LINE IN” connection, it is the best audio connec-
tion available. If the “AUX IN” or “LINE IN” connector is located on the front of your vehicle
radio, this is also the easiest connection. (Figure 29)
1. Purchase an audio cable that matches the connection type of your vehicle radio and your
SIRIUS radio at your local electronics retailer. Your SIRIUS radio requires a 1/8” stereo
male connector. Your local electronics retailer can help you determine the proper con-
nection for your vehicle radio.
2. Plug one end of the cable into the LINE OUT jack on the vehicle dock. (Refer to Figure
12 on page 24.) Plug the other end into your “AUX IN” or “LINE IN” jack on your vehicle
radio.
FM
OFF
figure 29
note: Refer to your vehicle radio manufacturer’s guidelines for correct installation.
note: If the “AUX IN” or “LINE IN” connection is on the back of your vehicle radio, you may
want to consider professional installation. (Figure 30)
[ Installation ]
ꢀꢆ
FM
OFF
figure 30
Cassette adapter
If your vehicle radio has a cassette player:
1. Purchase a Cassette Adapter at your local electronics retailer.
2. Connect the adapter between the LINE OUT on the vehicle dock (refer to Figure 12 on
page 24), and the vehicle radio’s cassette slot. (Figure 31)
note: Refer to the cassette adapter manufacturer’s guidelines for correct use.
FM
OFF
figure 31
[ Installation ]
ꢁ0
SIRIUS fm direct adapter
If your vehicle radio does not have an “AUX IN” or “LINE IN” jack, the SIRIUS FM Direct Adaptor
provides a wired connection between your Stiletto and your vehicle radio, eliminating the outside
static and interference you sometimes experience when using a wireless FM connection. (Figure
32) Professional installation may be required. See your local SIRIUS retailer. (The SIRIUS FM
Vehicle FM
Antenna
90.1
FM
DIRECT
ADAPTER
figure 32
[ Installation ]
ꢁ1
Subscribing to the SIRIUS Service
Before you can listen to the SIRIUS service, you need to activate your subscription. To sub-
scribe, do the following:
1. Before activating your Stiletto, be sure you have installed the vehicle kit as described in
the previous sections. Place the Stiletto in the vehicle dock and power it on by sliding
the Power/Lock switch down.
2. When the Stiletto has fully powered on, from the Home screen select Satellite Radio
All Channels and tune to channel 184. The SIRIUS channel line-up will begin updat-
ing. Wait until the channel updates have completed before pressing any buttons.
3. Once the channels have been updated, the display will change to Call 1-888-539-
SIRIUS to Subscribe. You should be able to hear audio from channel 184, the SIRIUS
Weather and Emergency channel.
4. Use the Media Dial to tune to channel 0 to display the Stiletto’s unique 12-digit
SIRIUS ID Number (SID). (Figure 33) The SID number is also available on the Stiletto’s
packaging, and may also be accessed by selecting Settings
Device
Sirius ID.
Write the SID number down in the space provided near the end of this installation guide.
5. Have your credit card handy and contact SIRIUS on the Internet at:
and follow the prompts to activate your subscription. You can also call SIRIUS toll-free
at: 1-888-539-SIRIUS (1-888-539-7474).
6. When you have successfully subscribed to the SIRIUS service, and the Stiletto has been
updated with your subscription information, an alert will be displayed. To continue, press
the Select button.
You are now ready to begin enjoying Sirius Satellite Radio’s digital entertainment, and can
tune to other channels!
00
112233445566
SID
Satellite
figure 33
[ Installation ]
ꢁ2
Operation
Presets
Channel presets may be selected using the vehicle dock to tune to a channel by pushing the
0—9 buttons when the vehicle dock is in the preset mode. The Stiletto must be in the Satellite
Radio mode to select presets. To select to a preset:
preset
1. Press the
Preset button on the vehicle dock. The preset mode indicator light will
indicate that the preset mode is active.
preset
2. Select the desired preset band (A, B, or C) by repeatedly pressing the
ton until the desired preset band is displayed. (Figure 34)
3. Press one of the 0—9 buttons to select the desired preset
OR
Preset but-
Use the Media Dial to highlight a preset and press the Select button. (Figure 35)
Presets (B)
B1 Margaritaville
31 Everywhere
Tim McGraw
B2 Sirius Disorder
24 CureFor Love
Bonnie Raitt
B
Presets
B3 Roadhouse
62 Honky Tonk Song
Webb Pierce
figure 34
figure 35
[ Operation ]
ꢁꢀ
Direct Channel Tuning
Channels may be tuned directly by entering the channel number using the 0—9 buttons on the
vehicle dock when the vehicle dock is in the tune mode. The Stiletto must be in the Satellite
Radio mode to select channels. To directly tune a channel:
tune
1. Press the
Tune button on the vehicle dock. (Figure 36) The tune mode indicator
light will indicate that the tune mode is active.
2. Enter the channel number of the desired channel. If a 3-digit channel number is entered,
the channel will be tuned immediately. If only one or two digits are entered, the channel
will be tuned after a slight pause. (Figure 37)
Direct
26
Tune
Enter channel #
figure 36
figure 37
[ Operation ]
ꢁꢁ
Jump Feature
jump
The
Jump button on the vehicle dock allows you to jump to a pre-selected traffic/
weather report for your location. The Stiletto must be in the Satellite Radio mode to use the
jump feature.
jump
When the
Jump button is pressed, the traffic/weather report will be tuned. (Figures 38
& 396) If the traffic/weather report for your location is not immediately available, a Waiting for
local report message will be displayed to indicate a jump is active. Once your local report is
ready, the Stiletto will automatically tune to the traffic/weather report.
jump
Pressing the
search. Pressing the
Jump button while the traffic/weather report is pending will cancel the
jump
Jump button after the radio has tuned to your traffic/weather re-
port will return back to the channel to which you had been tuned immediately prior to pressing
jump
the
Jump button.
jump
The traffic/weather report for your location is associated with the
the Settings menu. If you press the
Jump button using
jump
Jump button, but have not yet selected a traf-
fic/weather location, you will be prompted to select a location from a list of available cities.
(Figure 40)
Traffic & Weather
148
Atlanta
Traffic &
Weather
Baltimore
NY Traffic
Boston
Chicago
Dallas / Fort Worth
Detroit
Satellite
figure 38
figure 39
figure 40
[ Operation ]
ꢁꢂ
Troubleshooting
Symptom
Solution
SIRIUS radio does not Blown fuse, or the vehicle dock does not have power or is not
power on
properly connected.
Check the cigarette lighter adapter connection. Refer to the
vehicle’s owners manual for the location of the vehicle’s fuse
panel and check for a blown fuse.
SIRIUS radio displays: The satellite antenna is not connected to the vehicle dock.
Antenna Not Detected Check the satellite antenna connection to the vehicle dock.
SIRIUS radio displays: The Stiletto is searching for a satellite signal.
Acquiring Signal
Check for obstacles over or around the satellite antenna.
Change the vehicle location to eliminate nearby obstacles
(bridges, overpasses, tress, buildings, etc).
Audio static or loss of
clarity
The FM channel contains static.
Locate a unused FM channel on your vehicle radio and set the FM
transmitter frequency of the SIRIUS radio to match.
If using a direct connection, check the cable connections.
Refer to the section, Maximizing Audio Quality From Your
Stiletto Radio.
No sound
The vehicle dock is not connected or is incorrectly connected
to the vehicle’s sound system. Refer to the section Maximizing
Audio Quality From Your Stiletto Radio and follow the instruc-
tions carefully.
[ Troubleshooting ]
ꢁꢃ
Optional Accessories
The following optional accessories are available for purchase from your SIRIUS retailer to
maximize your SIRIUS Stiletto experience:
home Kit (model Slh1)
The Stiletto Home Kit is a compact home dock that provides everything you
need to use the Stiletto in your home or office. The sleek home dock pro-
vides a convenient way to charge your Stiletto’s battery along with an extra
slot for charging a spare battery. The included indoor/outdoor antenna
provides improved reception, while audio cables enable you to connect the
Stiletto to amplified speakers or a home entertainment system.
The kit includes a compact tabletop/desktop home dock with FM output for wireless con-
nectivity, a remote control, audio cables, an adjustable indoor/outdoor windowsill antenna with
20’ of cable, and an AC Adapter. Detailed installation instructions are included with the kit.
executive Sound System (model SleX1)
The Stiletto Executive Sound System is a portable docking
station and audio system for use with the Stiletto radio. With
the built-in amplifier and speakers, the system delivers rich,
powerful sound indoors or outdoors, and features an auxiliary
input for other audio devices. Included with the system is an
adjustable indoor/outdoor windowsill antenna with 20’ of cable and an AC adapter.
fm direct adapter (Product no 14100)
The FM Direct Adapter directly connects the FM signal from your SIRIUS radio to your
vehicle’s AM/FM radio, reducing any interference which might be present from FM radio sta-
tion broadcasts. When the SIRIUS radio is turned off, the vehicle’s FM antenna is automati-
cally connected back to the vehicle’s AM/FM radio. The adapter connects directly in-line with
the vehicle’s existing AM/FM antenna input. SIRIUS recommends professional installation of
this product.
[ Optional Accessories ]
ꢁꢄ
Warranty
12 month Warranty
SIRIUS Satellite Radio Inc. (the “Company”) warrants to the original retail purchaser of this product
that should this product or any part thereof, under normal use and conditions, be proven defective in
material or workmanship within 12 months from the date of original purchase, such defect(s) will be
repaired or replaced with new or reconditioned product (at the Company’s option) without charge for
parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product
is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s),
transportation prepaid, to the location shown below under WARRANTY RETURN.
This Warranty does not extend to the elimination of externally generated static or noise, to correction
of antenna problems, to costs incurred for installation, removal or reinstallation of the product, or to
damage to tapes, compact discs, speakers, accessories, or vehicle electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company,
has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect,
accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT
OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY
EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, IN-
CLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURA-
TION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HERE-
UNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT
WITHIN A PERIOD OF 48 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL
THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR
BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No
person or representative is authorized to assume for the Company any liability other than expressed
herein in connection with the sale of this product. Some states do not allow limitations on how long
an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the
above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and
you may also have other rights which vary from state to state.
WARRANTY RETURN: To obtain repair or replacement within the terms of this Warranty, please re-
turn product to an authorized retailer or call Customer Service at 1-800-869-5187; proof of purchase
and description of defect are required. Products to be returned to an approved warranty station must
be shipped freight prepaid.
[ Warranty ]
ꢁꢅ
Specifications
Cigarette Lighter Adapter Fuse Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2A Slow Blow
Cigarette Lighter Adapter Cable Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8m (6ft.)
Cigarette Lighter Adapter Operating Temperature . . . . . . . . . . -20° to +85° C (-4° to +185° F)
Vehicle Dock Power Requirements . . . . . . . . . . . . . . . . . . . .10-16 Volts, Negative Ground, DC
Antenna Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Low Profile Magnetic
Antenna Cable Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21’ (single micro-cable)
Connector Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SMB (right-angle)
Audio Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8” / 3.5mm Stereo Jack
[ Specifications ]
ꢁꢆ
Copyrights & Trademarks
© 2006 Sirius Satellite Radio Inc. All Rights Reserved.
® “SIRIUS”, the SIRIUS dog logo, channel names and logos are trademarks of Sirius Satellite
Radio Inc. All Rights Reserved.
“Stiletto” is a trademark of Sirius Satellite Radio Inc.
™
Hardware, subscription, and activation fee required. For full Terms & Conditions, visit
Equipment and subscription sold separately. Installation required with some equipment.
[ Copyrights & Trademarks ]
ꢂ0
SIRIUS ID
Write down the SIRIUS ID (SID) of your Stiletto in the space provided below.
SID: _______________________________________
SIRIUS Customer Service: 1-888-539-7474
SIRIUS Satellite Radio Inc.
1221 Avenue of the Americas
New York, NY 10020
1-888-539-7474
[ SIRIUS ID ]
ꢂ1
SIRIUS Satellite Radio Inc.
1221 Avenue of the Americas
New York, NY 10020
(800) 869-5590
SIRIUS Stiletto Vehicle Kit (091806a)
|