Sirius Satellite Radio STAREMATE REPLAY ST2 User Manual

ST2 STARMATE REPLAY  
SIRIUS Satellite Radio Plug and Play  
User and Installation Guide  
Table of Contents (continued)  
Time Zone ............................................................... 49  
Daylight Savings Time ............................................ 49  
Alarm ......................................................................... 50  
Set Alarm ................................................................ 50  
Alarm Time .............................................................. 50  
ProgramAlert ............................................................. 50  
Program Time/Day .................................................. 51  
Channel Number ..................................................... 52  
ProgramAlert On/Off ............................................... 52  
Auto Shutdown .......................................................... 52  
Sleep Mode ................................................................ 53  
Signal Indicator .......................................................... 53  
Factory Default .......................................................... 54  
Troubleshooting ............................................................... 56  
Specifications.................................................................. 57  
12 MONTH LIMITED WARRANTY .................................. 58  
© 2005 SIRIUS Satellite Radio Inc.  
FM Preset Button ...................................................... 37  
Menu Options ................................................................ 37  
FM Transmitter .......................................................... 38  
FM Presets ............................................................. 38  
FM On/Off ............................................................... 39  
GameAlert ................................................................. 39  
Settings...................................................................... 40  
Jump Settings ............................................................ 41  
Traffic ....................................................................... 41  
JumpSet .................................................................. 42  
Display Options ......................................................... 42  
Memory Options ........................................................ 43  
Automatic Memory Search ..................................... 43  
Clear All Memory..................................................... 43  
Auto Select ................................................................ 44  
Audio Level ................................................................. 44  
Confirmation Tone ...................................................... 45  
Parental Control ......................................................... 45  
Lock/Unlock ............................................................ 45  
Edit Code ................................................................ 46  
Time Based Features................................................. 48  
Clock ....................................................................... 48  
Format ..................................................................... 49  
® “SIRIUS,” the SIRIUS dog logo, channel names and logos are trademarks of  
Sirius Satellite Radio Inc. “NFL” and the NFL Shield logo, and the NFL  
Sunday Drive name and logo are registered trademarks of the National  
Football League. “NHL” and the NHL Shield are registered trademarks of the  
National Hockey League. “NBA” and the NBA silhouette logo are registered  
trademarks of NBA Properties Inc. Velcro is a registered trademark of Velcro  
Industries B.V. All other trademarks, service marks and logos are the property of  
their respective owners. All Rights Reserved.  
This receiver includes the eCos real-time operating system. eCos is published  
under the eCos License, which can be found at the following website:  
3
ST2 Starmate Replay User and Installation Guide  
Safety Precautions  
Warning  
Take the following precautions to prevent fire and  
avoid personal injury:  
• If the LCD display on the Receiver becomes  
damaged or broken, do not touch the liquid crystal  
fluid. The fluid can be dangerous to your health. If  
the liquid crystal fluid contacts your body or  
clothing, immediately wash it off with soap and  
water.  
• Be sure the Receiver is installed as described in  
the Installation Guide.  
• The use suggestions contained in this User Guide  
are subject to any restrictions or limitations that  
may be imposed by applicable law—the purchaser  
should check applicable law for any restrictions or  
limitations before installing and/or operating this  
Receiver.  
• Failure to follow these safety instructions and  
warnings may result in a serious accident.  
To avoid short circuits, never put or leave any  
metallic objects (coins, tools, etc.) inside the  
Receiver.  
Caution  
Take the following precautions to keep the Receiver  
in proper working order:  
• Do not open the Receiver.  
• When replacing a fuse, use only a new one with  
the proper rating. Using a fuse with the wrong  
rating may cause the Receiver to malfunction.  
To prevent a short circuit when replacing a fuse,  
first disconnect the wiring harness.  
Note:  
If the Receiver doesn’t seem to be working properly,  
turn the Receiver’s power off, wait 5 – 10 seconds,  
then turn the power on again.  
• If the Receiver emits smoke or unusual odors, turn  
the power off immediately.  
• Do not drop the Receiver, or subject it to strong  
shocks.  
4
ST2 Starmate Replay User and Installation Guide  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the other  
equipment and the Receiver.  
• Connect the other equipment to a different circuit  
from that to which the Receiver is connected.  
• Consult the dealer or an experienced radio  
technician for help.  
FCC Warning  
This equipment may generate or use radio  
frequency energy. Changes or modifications to this  
equipment may cause harmful interference unless  
the modifications are expressly approved in this  
User Guide. The user could lose the authority to  
operate this equipment if an unauthorized change or  
modification is made.  
Warning  
Note:  
Do not operate the Receiver in a way that might  
divert your attention from driving safely. As a driver,  
you alone are responsible for safely operating your  
vehicle in accordance with traffic safety laws at all  
times.  
This equipment has been tested and found to  
comply with Part 15 of the FCC Rules. These  
rules are designed to provide reasonable  
protection against harmful interference. This  
equipment may cause harmful interference to  
radio communications if it is not installed and  
used in accordance with these instructions.  
However, there is no guarantee that interference  
will not occur in a particular installation. If this  
equipment does cause harmful interference to  
radio reception, which can be determined by  
turning the equipment off and on, the user is  
encouraged to try to correct the interference by one of  
more of the following measures:  
Cleaning the Receiver  
If the Receiver becomes dirty, turn its power off and  
wipe it clean with a soft dry cloth. Do not use hard  
cloths, paint thinner, alcohol, or other volatile  
solvents to clean the Receiver. These may cause  
damage to the plastic or remove indicator  
characters.  
5
ST2 Starmate Replay User and Installation Guide  
Package Contents  
The following items are packaged with the ST2 Starmate Replay. Check the package to be all of the items are  
included. If any of the items are missing, please contact the retailer where you purchased the product.  
MEMO  
S-SEEK  
DISP  
MENU  
001  
U2  
Sirius Hits  
1
eparation  
esives.)  
Alcohol Swab and  
Velcro Strip  
Starmate Replay  
ST2 Receiver  
a
surface of any  
Vertigo  
POP  
Cleaning Kit  
®
12:00P  
A
Surface Pr  
o
clean  
to applying adh  
(T  
BAND  
known / unknown emulsions  
prior  
P.  
TUNE  
1
2
3
4
5
6
7
8
9
0
MUTE  
Suction Cup Mount  
& Screws  
Starmate Replay  
Remote Control  
+
MENU  
BAND  
DISP  
MEMO  
1
4
7
2
5
8
0
3
6
9
Mounting Plate  
MagneticAntenna  
Cigarette Lighter  
Power Cord  
RubberAntenna  
Cable Cover/Tail  
&Adhesive Strip  
User and  
Installation Guide  
ST2 STARMA  
TE REPLA  
Y
SIRIUS Satell  
ite Radio Plug  
and Play  
User and In  
stallation Guide  
6
ST2 Starmate Replay User and Installation Guide  
Installation  
good visibility of the Receiver.  
Installation of your ST2 Starmate Replay Receiver is  
easy:  
Mounting the Receiver  
1. Choose a location in your vehicle where you will  
mount the Receiver.  
2. Mount the Receiver to the suction cup mount and  
attach the suction cup portion of the mount to the  
vehicle window, or use the velcro strip to mount the  
Receiver.  
3. Install the magnetic antenna on the roof of the  
vehicle, and route the antenna cable to the Receiver.  
4. Connect the power cord for the Receiver to your  
vehicle’s cigarette lighter.  
The Receiver may be attached to the vehicle by  
using the suction cup mount, or by using the velcro  
strips.  
If you are using the suction cup mount, attach the  
mounting plate to the suction cup mount by using  
the provided bolts and hex nuts as shown below. Be  
sure the large tab on the mounting plate is facing up.  
5. Subscribe to the SIRIUS service and begin enjoying  
the SIRIUS entertainment!  
Location  
Choose a location in your vehicle where the Receiver  
will not block your vision, interfere with the vehicle  
controls, or obstruct the air bag. The location should  
be suitable for using the suction cup mount, such as  
the windshield or other flat, smooth surface, or a  
surface suitable for using the velcro mounting.  
The location should be easily reachable and provide  
7
ST2 Starmate Replay User and Installation Guide  
If you are using the velcro strip for mounting, attach  
the velcro strip to the back of the mounting plate.  
Route the cables through the mounting plate  
underneath the tabs as shown. The cables may be  
routed across the mounting plate, or routed down to  
exit at the bottom.  
1
2
If you are using the suction cup mount, attach the  
suction cup mount to the vehicle windshield, or other  
surface, as follows:  
Place the Receiver into the mounting plate by first  
placing the bottom of the Receiver into the tabs at  
the bottom of the mounting plate (1), and then  
pivoting the top of the receiver into the mounting  
plate until it snaps into place (2).  
1. Clean the area where you are attaching the  
suction cup with an alcohol wipe.  
2. Lift up the cam lever on the suction cup mount as  
shown.  
8
ST2 Starmate Replay User and Installation Guide  
4. Lock the cam lever down as shown.  
3. Place the suction cup mount on the windshield, or  
other area, and press the cam lever straight down  
towards the suction cup to flatten the suction cup  
as shown.  
Installing the Magnetic Antenna  
The optimum mounting location for the antenna is  
on the roof of the vehicle, with a minimum  
unobstructed area of 12 inches by 12 inches, and  
exactly 6½ inches from the rear roof edge of the  
vehicle (the length of the rubber antenna cable  
cover/tail). It is important to avoid any obstructions  
that will block the SIRIUS signal, obstructions such  
as a roof rack, a sunroof, roof mounted cargo  
containers, or other antennas.  
The following illustrations show the recommended  
mounting locations of the antenna for several types  
of vehicles. Follow these recommendations for best  
9
ST2 Starmate Replay User and Installation Guide  
performance from the antenna.  
Convertible: Mount the antenna along the centerline  
of the trunk lid, with the rubber antenna cable cover/  
tail directed toward the rear window.  
Sedan/Coupe: Mount the antenna along the rear  
centerline of the vehicle roof, located at the rear of  
the roof near the rear window.  
Clean the area where the antenna and rubber  
antenna cable cover/tail will be mounted with the  
supplied alcohol swab.  
SUV/Mini-Van: Mount the antenna along the rear  
centerline of the vehicle roof, located at the rear of  
the roof near the rear door/hatch.  
Connect the rubber antenna cable cover/tail to the  
antenna cable, making sure that the strain-relief on  
the antenna seats into the rubber antenna cable  
cover/tail groove. Route the antenna cable through  
the wire channel in the rubber antenna cable cover/  
tail. Do not yet attach the adhesive strip.  
Pickup Truck: Mount the antenna along the rear  
centerline of the cab roof, located at the rear of the  
roof near the rear window.  
10  
ST2 Starmate Replay User and Installation Guide  
ANTENNA  
(UNDERSIDE)  
PROTECTIVE MATERIAL  
(RED SIDE)  
Route the cable from the lowest point of the rear  
window into the trunk. Take advantage of any  
existing cable channels or wiring conduits. For  
SUVs, mini-vans & 5-door vehicles, bring the cable  
into the vehicle under the rubber molding for the  
tailgate, and continue under the interior trim.  
ADHESIVE  
STRIP  
From the trunk, or rear of the vehicle, route the cable  
around the passenger compartment and to the front  
of the vehicle, to the receiver. Take care not pull the  
cable across sharp edges that could damage it, and  
keep it away from areas where it might entangle  
feet. Coil any excess antenna cable in a location  
where it can be hidden.  
Once the antenna cable is routed through the  
vehicle, and you are satisfied with the cable routing,  
peel the yellow protective material from the  
adhesive strip and adhere the adhesive strip to the  
rubber antenna cover/tail. Next peel the red  
protective material from the adhesive strip and  
press the rubber antenna cable cover/tail firmly into  
place on the vehicle.  
ANTENNA  
CABLE  
RUBBER ANTENNA  
CABLE COVER/TAIL  
Temporarily position the antenna and rubber antenna  
cable cover/tail in the selected mounting area and  
route the cable from the antenna to the vehicle’s  
interior by tucking it underneath the rubber molding  
around rear window, as shown.  
11  
ST2 Starmate Replay User and Installation Guide  
Double check that the location of the antenna and  
rubber antenna cable cover/tail are correct, and  
continue to press firmly down on rubber antenna  
cable cover/tail for another 30 seconds.  
Connecting the Receiver  
Connect the antenna and cigarette lighter power  
adapter to the Receiver to complete the installation.  
The illustration below shows the location of the  
antenna and power connectors on the Receiver.  
RUBBER ANTENNA  
CABLE COVER/TAIL  
ANTENNA  
FM OUT  
AUDIO OUT  
POWER  
VEHICLE  
MOUNTING SURFACE  
Note: At room temperature (68 degrees), maximum  
adhesion usually occurs within 72 hours. During this  
period, avoid car washes and other contact with the  
antenna and rubber antenna cable cover/tail.  
Plug the cigarette lighter power adapter cord into  
your vehicle’s cigarette lighter, and turn the Receiver  
On by pressing the power button. Once you have  
verified that Receiver has powered on, you can  
proceed with activating your SIRIUS subscription.  
12  
ST2 Starmate Replay User and Installation Guide  
Activating your SIRIUS Subscription  
channels until you activate your SIRIUS  
subscription.  
Before you can listen to the SIRIUS service, you  
need to subscribe to the SIRIUS Satellite Radio  
service.  
184  
To ActivatePrCeavilelw  
1-888-539-SIRIUS  
1. Be sure that the Receiver is correctly installed  
and that the antenna is oriented to receive the  
SIRIUS signal.  
2. Press the power button to turn Receiver On.  
After displaying the SIRIUS logo, the Receiver  
will update the SIRIUS channel line up. The  
display will show, “UPDATING CHANNELS” and  
show the status of the update.  
News  
12:00P  
A
4. To listen to the audio from your Receiver, you will  
need to tune the FM radio in your vehicle and the  
FM transmitter in the Receiver to the same FM  
frequency. The FM transmitter in the Receiver  
defaults to 88.1 MHz, so you can begin by tuning  
your FM radio to 88.1 MHz. If there is an FM station  
broadcasting on that frequency, you will have to  
search for a quiet frequency to use. Refer to the  
section titled, FM Transmitter in this User Manual  
for instructions on how to tune the FM transmitter  
to other FM frequencies.  
5. Use the channel up and down buttons to tune  
the Receiver to channel 000 to display the  
Receiver’s unique 12-digit SIRIUS ID Number  
(SID). You may also directly tune to channel 000  
by pressing the Select button, pressing the 0  
(zero) button, and pressing the Select button  
Updating Channels  
X% Completed  
Wait until the channel updates have completed  
before pressing any buttons on the Receiver.  
3. Once the channels have been updated, the  
display will change to “Call 1-888-539-SIRIUS to  
Subscribe” and will place you in SIRIUS Satellite  
Radio’s Preview Channel, channel 184.  
You will not be able to tune to any other  
13  
ST2 Starmate Replay User and Installation Guide  
again. You may do this from either the Receiver  
or the remote control. (This SID number is also  
available on the ST2 packaging.) Write the SID  
number down in the space provided at the end  
of this manual.  
001  
Channel Name  
Subscription Updated  
Artist Name  
Any Key to Continue  
Category 12:00P  
A
To continue, press any key on the Receiver.  
The installation of your Receiver is now complete,  
and you are ready to begin enjoying SIRIUS Satellite  
Radio’s digital entertainment!  
000  
SIRIUS ID  
SID  
012345678912  
12:00P  
A
Optional Installation Kits  
6. Have your credit card handy and contact SIRIUS  
on the Internet at:  
and follow the prompts to activate your  
subscription. You can also call SIRIUS toll-free  
at:  
1-888-539-SIRIUS (1-888-539-7474)  
7. When you have successfully subscribed to the  
SIRIUS service, and the Receiver has been  
updated with your subscription information, an  
alert will be displayed.  
There are two optional installation kits which may be  
purchased for use with your ST2 Starmate Replay  
Receiver, a Custom Vehicle Installation Kit (Model #  
STV2), and a Home Kit (Model # STH2). These kits  
may be purchased from your SIRIUS Satellite Radio  
retailer.  
Custom Vehicle Installation Kit (STV2)  
The optional custom vehicle installation kit provides  
additional items for a more permanent installation in  
your vehicle. The kit consists of the following items:  
DIN-compatible Install Plate - for installing the  
Receiver in the dashboard of your car or boat.  
14  
ST2 Starmate Replay User and Installation Guide  
Power Harness - for connecting the power for the  
Home Antenna -ASIRIUS antenna to connect to  
Receiver to the vehicle’s electrical system.  
your Receiver while in your home.  
FM Switching Box - for connecting the FM output of  
the Receiver into the FM antenna input of your  
vehicle’s radio. This box will automatically switch off  
the vehicle’s FM antenna when you turn on your  
SIRIUS Receiver.  
Audio Cables - For connecting the audio output of  
the Receiver into your vehicle’s audio system.  
Home Kit (STH2)  
The optional home kit allows you to enjoy the SIRIUS  
Satellite Radio’s digital entertainment in your home,  
by allowing you to take your Receiver from your  
vehicle into your home. The kit consists of the  
following items:  
Stand - A stand into which to snap your Receiver  
while being used in your home.  
AC Adapter -A power adapter to power your  
Receiver in the home.  
Audio Cables - Cables to connect the Receiver to  
powered speakers, or your home entertainment  
system.  
15  
ST2 Starmate Replay User and Installation Guide  
ST2 Starmate Replay Receiver Basic Operation  
1
2
3
4
5
6
7
MEMO  
DISP  
S-SEEK  
MENU  
14  
13  
12  
11  
001  
Sirius Hits 1  
U2  
8
Vertigo  
POP  
12:00P A  
BAND  
P. TUNE  
1
2
3
4
5
6
7
8
9
0
10  
9
16  
ST2 Starmate Replay User and Installation Guide  
Controls and Features  
on the display.  
1. POWER Button  
: Turns the Receiver’s power  
9. Category Previous/Next Buttons: Navigates  
through the category list screen which displays  
SIRIUS channel categories.  
On and Off.  
2. Rewind Button: Used to rewind through a  
broadcast saved in Instant Replay.  
10. Preset Number Buttons (0-9): Sets and selects  
preset channels.Also used to directly tune  
channels by entering the channel number.  
11. BAND Button (P.Tune): Pressing and releasing  
switches between the five preset banks (A, B, C),  
which hold ten presets each. Pressing and holding  
enables “Preset Tune Mode”, which allows for  
viewing and listening of stored presets with the  
channel up/down buttons.  
3. Play/Pause Button: Pause Function: Used to  
pause a broadcast for Instant Replay. Play  
Function: Used to play a broadcast saved in  
Instant Replay.  
4. Fast Forward Button: Used to fast forward  
through a broadcast saved in Instant Replay.  
5. MEMO (Memory) Button (S-Seek Function):  
Saves and recalls artist names, song titles, and  
sports teams. Holding the button down enters the  
S-Seek mode.  
6. DISP (Display) Button: Toggles display between  
the default display screen and large screen display  
mode. Holding the DISP button down switches the  
display to the channel list mode.  
12. FM Preset Button: Selects between preset FM  
frequencies used for the built-in wireless  
transmitter.  
13. Jump Button: Used to quickly switch between the  
current channel and a favorite channel.  
14. MENU Button: Used to access menu options to  
7. Select Button: Selects items highlighted on the  
make setup and feature changes.  
display screen.  
8. Channel Up/Down Buttons: Navigates through  
channels and display screens, and highlights items  
17  
ST2 Starmate Replay User and Installation Guide  
Remote Control  
1. Power Button  
: Turns the Receiver power On and Off.  
1
2
3
2. Category Previous/Next Buttons: Navigates through categories.  
3. MUTE Button: Mutes the audio.  
MUTE  
4. Channel Up/Down Buttons: Navigates through channels and display screens.  
5. Rewind Button: Used to rewind through a broadcast saved in Instant Replay.  
6. Play/Pause Button: Pause Function: Used to pause a broadcast for Instant  
Replay. Play Function: Used to play a broadcast saved in Instant Replay.  
7. Fast Forward Button: Used to fast forward through a broadcast saved in Instant  
Replay.  
8. +/- Volume Buttons:Adjusts the audio volume up & down.  
9. Number Buttons (0-9): Used for directly selecting channels and for presets.  
10. MEMO (Memory) Button: Saves and recalls artist names, song titles, and sports  
teams. Holding this button down enters the S-Seek mode.  
11. BAND Button: Switches between preset bandsA, B, and C.  
12. MENU Button: Used to access menu options to make setup and feature changes.  
13. DISP Button:Toggles display between the default display screen and large screen  
display mode. Holding this button down switches to the channel list mode.  
14. Jump Button: Used to quickly switch between the current channel and a favorite  
channel.  
4
16  
15  
5
6
7
14  
13  
12  
11  
+
MENU  
DISP  
8
BAND  
MEMO  
10  
1
4
7
2
5
8
0
3
6
9
9
Installing Batteries in the  
Remote Control  
1. Remove the battery cover.  
2. Install CR2025 battery.  
(+ positive side is up)  
15. FM Preset Button: Selects between preset FM frequencies used for the built-in  
wireless transmitter.  
3. Replace the battery cover.  
16. Select Button: Selects items highlighted on the display screen.  
18  
ST2 Starmate Replay User and Installation Guide  
which you are currently tuned.  
After you have successfully activated your SIRIUS  
subscription, and the Receiver has received the  
subscription information from the SIRIUS signal, the  
default display screen will be displayed.  
Category  
001 Channel Name  
002 Channel Name  
003 Channel Name  
004 Channel Name  
Default Display Screen  
Channel  
Name  
Auto Sizing/  
Scrolling  
Song Title  
Channel  
Number  
Repeated momentary pressing of the DISP button  
while in the category list mode will cause the  
Receiver to sequence the display between listings  
of artist names, song titles, and back to channel  
names.  
001  
Channel Name  
Auto Sizing/  
Scrolling  
Artist Name  
Artist Name  
Song Title  
Category 12:00P  
Band/Preset  
Bank Number  
A
Antenna  
Signal  
Strength  
Clock  
Channel Category  
Category  
001 Channel Name  
002 Channel Name  
003 Channel Name  
004 Channel Name  
When the Receiver is powered On, the previously  
selected channel will automatically begin playing,  
and the artist name and song title of the currently  
playing song will be displayed.  
Category  
001 Artist Name  
002 Artist Name  
003 Artist Name  
004 Artist Name  
Category  
001 Song Title  
002 Song Title  
003 Song Title  
004 Song Title  
Changing Channels  
Pressing the channel up or down button will cause  
the Receiver to immediately tune to the next or  
previous channel.  
Pressing the category previous or next button will  
cause the receiver to display a list of the channels in  
the current category, highlighting the channel to  
Pressing the category previous or next button again  
will cause the Receiver to display a listing of the  
previous or next channel category.  
Use the channel up/down buttons to highlight a  
19  
ST2 Starmate Replay User and Installation Guide  
channel within a category and press the select  
button to tune to the highlighted channel. When a  
new channel is selected, the display will revert to the  
default display screen for the new channel.  
To exit the channel list mode without changing to a  
different channel, press and hold the DISP button for  
1½ seconds, until the default screen is displayed.  
Once the Receiver has entered the channel list  
mode, a listing of the channel numbers and names  
is displayed. Repeated momentary pressing and  
releasing of the DISP button will sequence the  
display between listings of artist names, song titles,  
and back to channel names.  
001 Channel Name  
002 Channel Name  
003 Channel Name  
004 Channel Name  
005 Channel Name  
Display Button (DISP)  
Momentarily pressing and releasing the DISP  
(Display) button while the default screen is displayed  
changes the artist name and song title to a scrolling,  
single line, large format display for easier viewing  
from a distance.  
001 Artist Name  
002 Artist Name  
003 Artist Name  
004 Artist Name  
005 Artist Name  
001 Song Title  
002 Song Title  
003 Song Title  
004 Song Title  
005 Song Title  
001  
Channel Name  
001  
Channel Name  
Note: If you are viewing a sports category channel  
list (NFL®, NBA®, NHL®, or College), pressing the  
DISP button will instead toggle between the team  
names and the current score of any live play-by-play  
game.  
Use the category previous and next buttons to scroll  
through the music and entertainment categories,  
and the channel up and down buttons to scroll  
Artist Name  
Song Title  
Category 12:00P  
Artist N  
A
Category 12:00P  
A
Pressing and holding the DISP button for 1½  
seconds will cause the Receiver enter the channel  
list mode. The channel list mode makes it easy to  
quickly search for and locate music by channel, by  
category, by artist, and by song title.  
20  
ST2 Starmate Replay User and Installation Guide  
Advanced Features  
through the available channels in each category to  
find the channel to which you want to listen.  
Channel Presets (BAND)  
You can store up to 30 of your favorite channels as  
presets for quick recall access. The preset channels  
are stored in 3 bands, A, B, and C, each containing  
10 channel presets, and are numbered 0 to 9. The  
10 channel presets in each band are accessed by  
pressing the appropriate number (0 to 9) on the  
Receiver. Amomentary press and release of the  
BAND button cycles through the 3 preset bands (A,  
B, and C).  
When you have found the channel you wish to listen  
to, highlight the channel using the channel up and  
down buttons and press the select buttonto tune to  
the channel. The new channel will begin playing and  
the display will revert to the default display screen  
for the new channel.  
To exit the channel list mode without changing to a  
different channel, press and hold the DISP button for  
1½ seconds, until the default screen is displayed.  
Storing Channel Presets  
To store a favorite channel as a preset, do the  
following:  
Selecting Channels Directly  
A channel may be directly selected by entering the  
channel number using the 0 - 9 buttons on the  
Receiver.  
To enter a channel number, momentarily press and  
release the select button. At the display prompt enter  
the three digit channel number.  
1. Momentarily press and release the BAND  
button until the desired preset band, A, B, or C,  
is displayed in the lower right corner of the  
default display screen.  
2. Tune the Receiver to the channel you wish to  
store as a preset. (See the section, Basic  
Operation for specific instructions for tuning to a  
channel.)  
001  
Channel Name  
Enter Channel  
Arti#  
s
___  
t N  
Category 12:00P  
A
3. Press and hold for 1½ seconds the numbered  
21  
ST2 Starmate Replay User and Installation Guide  
preset button in which you wish to store your  
favorite channel, until you hear a beep. The  
band and preset number will then be displayed  
in the lower right corner of the display screen to  
confirm that the channel has been stored.  
and preset number will be displayed in the lower  
right corner of the default display screen.  
001  
Channel Name  
Artist Name  
Song Title  
Category 12:00P  
001  
Channel Name  
A3  
Artist Name  
Preset Stored  
Searching for a Channel Preset (P.TUNE Mode)  
To quickly search through all of your presets in the  
P.TUNE mode, do the following:  
Category 12:00P  
A1  
Note: If the preset button already has a channel  
stored in it, the preset will be replaced by the newly  
stored channel.  
1. Press and hold the BAND button for  
approximately 1 second to enter the P.TUNE  
mode. “Preset Tuning Mode” will momentarily be  
displayed and the top left and lower right  
corners of the display will invert to indicate the  
Receiver is in the Preset Tune Mode.  
Using Channel Presets  
The active band of presets is displayed in the lower  
right corner of the default display screen, A, B or C.  
To change the active band, momentarily press and  
release the BAND button to cycle between the  
preset bands.  
The 10 preset channels in the active band can then  
be selected by momentarily pressing and releasing  
the 0 through 9 buttons.  
001  
Channel Name  
001  
Channel Name  
Artist Name  
Preset Tune Mode  
Artist Name  
Song Title  
Category 12:00P  
Category 12:00P  
A
A1  
2. Use the channel up and down buttons to move  
up or down through your channel presets and  
immediately tune to each channel. Channel  
When you have chosen a preset channel, the band  
22  
ST2 Starmate Replay User and Installation Guide  
between the team names and the current score  
of any live play-by-play game.  
presets are grouped and displayed by bank and  
preset number, i.e., A-1, A-2...B-1, B-2, etc.  
Empty presets are not displayed.  
4. To exit the channel list mode, press and hold  
the DISP button for approximately one second,  
until the display reverts to the P.TUNE mode.  
5. To exit the P.TUNE mode, press and hold the  
BAND button for approximately 1 second, until  
the default display screen is displayed.  
3. To view the channel presets in the channel list  
mode, where you can view 4 presets at once,  
momentarily press and hold the DISP button for  
approximately one second until the channel list  
mode is displayed. Repeated momentary  
pressing and releasing of the DISP button will  
sequence the display between listings of artist  
names, song titles, and back to channel names.  
Memory (MEMO) and Song Seek (S-Seek)  
Functions  
This feature allows you to capture and store  
information in the Receiver’s memory about the  
currently tuned programming– artist, song, or sports  
team. The Receiver then continuously searches all  
incoming SIRIUS channels and alerts the user when  
a program saved in memory matches a selection  
currently being played.  
A-1 Channel Name  
A-2 Channel Name  
A-3 Channel Name  
A-4 Channel Name  
A-5 Channel Name  
A-1 Song Title  
A-2 Song Title  
A-3 Song Title  
A-4 Song Title  
A-5 Song Title  
A-1 Artist Name  
A-2 Artist Name  
A-3 Artist Name  
A-4 Artist Name  
A-5 Artist Name  
001  
Channel Name  
Artist Name  
S-Seek Alert  
Note: If you are viewing a sports category  
channel list (NFL®, NBA®, NHL®, or COLLEGE),  
pressing the DISP button will instead toggle  
Category 12:00P  
A
A total of 30 artists, songs, and sports teams may  
be stored in memory.  
23  
ST2 Starmate Replay User and Installation Guide  
100  
Channel Name  
If you have saved a sports team (or teams) in  
memory, at the time Receiver is initially powered on,  
you will be alerted if your sports teams are playing in  
a game being broadcast. Also, while listening to your  
SIRIUS receiver, should one of your teams begin to  
play a game, you will be alerted.  
Store Artist?  
Artist Name  
StoreSong?  
Category 12:00P  
A
If either the artist name or song title is not  
available to save, the choice will be displayed as  
unavailable.  
001  
Channel Name  
100  
Channel Name  
100  
Channel Name  
Artist Name  
GameAlert  
Category 12:00P  
Artist Unavailable  
Store Artist?  
Artist Name  
Artist Name  
Store Song?  
SongUnavailable  
A
Category 12:00P  
A
Category 12:00P  
A
Using the channel up and down buttons, choose  
StoreArtist or Store Song (when available) and  
press the select button to save the current  
selection to memory.  
If both the artist and song are available to save,  
you will be prompted again to save whichever  
one you haven’t yet saved, song title or artist  
name. If you do not wish to save, press the  
MEMO button to exit.  
Storing Artist Names, Song Titles, and Sports  
Teams to Memory  
If you are listening to a song or other entertainment  
channel, or a sports team, and wish to save the  
artist, song, or sports team selection to memory for  
future S-Seek alerts, do the following:  
1. For Artist Names or Song Titles: If the  
currently tuned channel is a music or  
entertainment channel, momentarily press and  
release the MEMO button. The Receiver will  
display a menu to choose to store the artist  
name or the song title.  
100  
Channel Name  
100  
Channel Name  
Artist Stored  
Store Artist?  
Artist Name  
Artist Name  
Store Song?  
SongStored  
Category 12:00P  
A
Category 12:00P  
A
24  
ST2 Starmate Replay User and Installation Guide  
2. For Sports Games: If the current tuned channel  
is an NFL, NBA, NHL, or College play-by-play  
sports broadcast, momentarily press and  
release the MEMO button. The Receiver will  
display a menu to choose which sports team  
should be saved to memory.  
Alert Type  
Initial Game Alert  
All Score Updates  
“Initial GameAlert” will provide an alert when the  
team you have chosen is playing a game. “All  
Score Updates” will provide an alert when the  
team you have chosen is playing a game, and  
also when the scores are updated for the team.  
Using the channel up and down buttons, choose  
the desired alert and press the select button to  
save the selection to memory.  
100  
Channel Name  
StoreDNYALG?  
Artist Name  
Category 12:00P  
A
If either of the teams is not available to save,  
that team will be displayed as unavailable.  
If both teams are available to save, you will be  
prompted again to save the other team. If you  
wish to save the team, follow the same  
procedure as when saving the first team. If you  
do not wish to save, press the MEMO button to  
exit.  
100  
Channel Name  
Store NYG?  
Artist Name  
Team2 Unavailable  
Category 12:00P  
A
Using the channel up and down buttons, choose  
the desired sports team (when available) and  
press the select button to save the current  
selection to memory.  
The next screen will ask which kind of alert you  
wish to have.  
100  
Channel Name  
100  
Channel Name  
Store DAL?  
Store NYG?  
Artist Name  
Artist Name  
NYGStored  
DALStored  
Category 12:00P  
A
Category 12:00P  
A
25  
ST2 Starmate Replay User and Installation Guide  
3. To ensure that no duplicate entries are stored in  
memory, the Receiver will check the stored  
memory list to ensure that the alert about to be  
stored is not already stored in memory. If a  
duplicate entry is found, an “Unable to Store”  
screen will be displayed for 1 second.  
5. If the MEMO button is pressed and all of the  
memory spaces are full, an “S-Seek Full”  
screen will be displayed for 1 second.  
001  
Channel Name  
Artist Name  
MemoryFull  
Category 12:00P  
A
001  
Channel Name  
A “Replace” or “Cancel” screen will then be  
displayed which will allow you to choose  
whether to replace an existing alert stored in  
memory, or to cancel storing the alert to  
memory.  
Unable to Store  
Artist N  
Category 12:00P  
A
The Receiver will then revert to the last active  
display mode.  
4. If the new alert was successfully stored in  
memory, a Artist/Song/Game Storedpop-up  
screen followed by an X Used/Y Empty”  
screen will be displayed for 1 and 2 seconds  
respectively. X is the total number of listings  
stored in memory, and Y is the total number of  
memory listings still available for storage.  
001  
Channel Name  
Replace  
Arti  
Can  
s
cetl  
N
Category 12:00P  
A
Using the channel up and down buttons, choose  
whether to replace an existing alert or cancel  
saving the alert to memory. If you choose to  
cancel saving the alert, the Receiver will revert  
to the last active display mode.  
Channel Name  
001  
Channel Name  
001  
Artist Name  
XUsed/YEmpty  
Category 12:00P  
Artist Name  
Artist Stored  
If you have chosen to replace an existing alert, a  
listing of all the alerts stored in memory will be  
A
Category 12:00P  
A
26  
ST2 Starmate Replay User and Installation Guide  
displayed.  
Viewing Stored Alerts Stored in Memory  
To view the alerts which have been saved to  
X/Y  
Replace  
Artist Name/ Song Tit  
memory, press and hold the MEMO button for 1½  
seconds to enter S-Seek mode. The alerts stored in  
memory will be displayed one-at-a-time in page  
format. Use the channel up and down buttons to  
scroll through the listings. This function allows you  
to review previously stored program information.  
Artist Name  
Sports Team  
Artist Name/ Song Tit  
Using the channel up and down buttons,  
highlight the alert that you would like to overwrite  
and press the select button to store the new  
alert. If the new alert was successfully saved in  
memory, a Artist/Song/Game Storedpop-up  
screen followed by an “X Used/Y Empty”  
screen will be displayed for 1 and 2 seconds  
respectively. X is the total number of listings  
stored in memory, and Y is the total number of  
memory listings still available for storage.  
Memory  
1/30  
Artist Name  
Song Title  
To exit this function, momentarily press and release  
the MEMO button.  
Deleting an Alert Stored into Memory  
To delete an alert stored in memory, do the following:  
001  
Channel Name  
001  
Channel Name  
Artist Name  
XUsed/YEmpty  
Category 12:00P  
Artist Name  
Artist Stored  
1. Press and hold the MEMO button for 1½  
seconds to enter S-Seek mode. The alerts  
stored in memory will be displayed one-at-a-  
time in page format.  
A
Category 12:00P  
A
The Receiver will revert to the last active display  
mode.  
2. Use the channel up and down buttons to find the  
alert which you wish to delete and press the  
27  
ST2 Starmate Replay User and Installation Guide  
select button.  
3. A screen displaying “Delete”, “Seek On”, and  
“Seek Off” will be displayed.  
and 2 seconds respectively. X is the total  
number of listings saved in memory, and Y is  
the total number of memory listings still  
available for storage.  
Memory Recall  
Seek On  
08/29  
Memory  
08/29  
Memory  
Seek Off  
Delete  
Artist Name  
Artist Name  
29 Used/1 Empty  
Deleted  
4. Use the channel up and down buttons to  
highlight the “Delete” option, and press the  
select button. Adelete confirmation screen will  
appear.  
The Receiver will revert to the last active display  
mode.  
Activating the S-Seek Alert  
Delete  
To activate the S-Seek alert function to begin  
receiving alerts, do the following:  
Yes  
No  
1. Press and hold the MEMO button for 1½  
seconds to enter the S-Seek mode.  
2. Press and release the select button. A screen  
displaying “Delete”, “Seek On”, and “Seek Off”  
will be displayed.  
To permanently delete the alert from the  
memory list, highlight “Yes” using the channel  
up and down buttons and press the select  
button to confirm.  
Memory Recall  
S-Seek On  
S-Seek Off  
Delete  
5. A “Deleted” pop-up screen followed by an X  
Used/Y Emptyscreen will be displayed for 1  
28  
ST2 Starmate Replay User and Installation Guide  
3. To enable S-Seek alerts, use the channel up and  
down buttons to highlight the “Seek On” option  
and press the select button. The S-Seek function  
is now enabled.  
SIRIUS SEEK LIST  
121 Artist Name/ Song  
156 Artist Name  
When the S-Seek option is enabled, whenever the  
Receiver is turned on, it automatically searches the  
incoming channels to determine if a match exists  
with the program information stored in the S-Seek  
memory. If one or more matches are found, a pop-up  
screen momentarily appears for 2 seconds and  
displays “S-SeekAlert” or “GameAlert”, depending  
upon which type of a match was found. An audible  
beep tone will also be heard indicating that a match  
was found.  
MY GAME ZONE  
MY GAME ZONE  
100 Giants @ Cowboys  
123 Bulls @ Cavaliers  
100 NFL NYG 7 DAL 3  
123 NBA BUL 77 CLE 73  
You can now select the artist, song, or sports game  
that you wish to tune to by using the channel up and  
down buttons to highlight your selection from the list,  
and then pressing the select button. If no selection  
is made within 10 seconds, the Receiver will revert  
to the last active display mode. NOTE: Play of the  
current selection will continue until a new selection  
is chosen from the S-Seek or My Game Zone list.  
001  
001  
Channel Name  
Channel Name  
Artist Name  
GameAlert  
Category 12:00P  
Artist Name  
S-Seek Alert  
Jump Button  
A
Category 12:00P  
A
The Receiver has a special preset button called the  
The Receiver then displays the S-SeekAlert or My  
Game Zone screen, which displays a list of the  
current matches. No alert is provided for the currently  
selected channel.  
Jump button, which is identified by the  
icon.  
The Jump button is used to quickly tune to a  
channel that is accessed frequently and temporarily  
such as a traffic channel, a weather channel, a  
29  
ST2 Starmate Replay User and Installation Guide  
news channel, a sports channel, or any channel at  
all. Pressing the Jump button allows you to quickly  
tune to the specific channel you have programmed  
into the Jump button, and then tune back to the  
original channel by pressing the Jump button again.  
(Refer to the Menu Options section of this manual  
for instructions for configuring the Jump button.)  
001  
Channel Name  
Artist Name  
Jump Canceled  
Category 12:00P  
A
Pressing the Jump button after the Receiver has  
tuned to the traffic report channel will return you to  
the previous channel.  
If the Jump button has been preset to the traffic  
option, which will cause the Receiver to access a  
specific city traffic report, pressing the Jump button  
will immediately begin a search for the city’s traffic  
report. The Jump icon will be displayed in the lower  
right corner of the display screen to indicate that a  
Jump search is active. The search process may  
take up to 4 minutes until the city’s traffic report  
found. The Receiver will automatically tune to the  
traffic report channel when the traffic report is found.  
If the Jump button has been preset to the JumpSet  
option, pressing the Jump button will immediately  
tune to the channel preset into the JumpSet. The  
Jump icon will be displayed in the lower right corner  
of the display screen to indicate that the Jump  
preset channel is currently tuned.  
150  
Channel Name  
NYC Weather  
NYC Weather  
Pressing the Jump button again will return to the  
previous channel.  
001  
Channel Name  
Artist Name  
NYCPending  
Category 12:00P  
Note: The channel preset for the Jump button  
remains the same regardless of which preset  
memory bank is currently selected.  
Pressing the Jump button again while the Receiver  
is actively searching will cancel the search.  
30  
ST2 Starmate Replay User and Installation Guide  
Game Alert  
Instant Replay  
The Receiver has a feature called Game Alert which  
can automatically alert you when your favorite sports  
team is playing a game. When a sports game  
involving one of your favorite sports teams is found,  
a GameAlert screen is displayed, followed by a  
screen displaying tuning information for the sports  
games.  
The Receiver has a feature called Instant Replay  
which stores the audio of the channel to which you  
are listening for later playback.Approximately 30 to  
60 minutes of audio depending upon the channel to  
which you are tuned is stored. As soon as you tune  
to a channel, the Receiver automatically begins  
storing the audio, enabling you to rewind at any time  
to replay the audio again. If you unable to continue  
listening to a channel, but do not want to miss the  
broadcast, pressing the Play/Pause button will  
cause the Receiver to mute the audio and mark the  
point in the broadcast so you can resume listening  
at a later time.  
001  
Channel Name  
MY GAME ZONE  
100 Giants @ Cowboys  
123 Bulls @ Cavaliers  
Artist Name  
GameAlert  
Category 12:00P  
A
You can then use the channel up and down buttons  
to highlight your favorite sports team in the list, and  
then press the select button to tune to the channel  
where the game is being broadcast.  
Refer to the Game Alert section in the Menu  
Options section of this manual for instructions on  
programming your favorite sports teams into the  
Receiver. You can also use the S-Seek feature to  
add Game Alerts for sports teams. See the section,  
Storing Artist Names, Song Titles, and Sports  
Teams to Memory for more information.  
Pause/Play button. When pressed, this places  
the Receiver in the Instant Replay pause mode  
which mutes the audio.  
Pressing and releasing the Pause/Play button  
causes the Receiver to begin playing the stored  
audio from the point at which the Receiver was  
paused. During playback, the Receiver will  
continue to store the channel audio until you exit  
the Instant Replay mode.  
31  
ST2 Starmate Replay User and Installation Guide  
Pressing and holding the Play/Pause button  
changes the display to a listing of the artist’s  
names in the stored audio, from the most recent  
to the oldest, beginning with an entry called  
“Live”. (Pressing the DISP button will toggle the  
display between the artist name list and the  
song/program title list.) An item from the list may  
be chosen and the playback will commence  
from that point in the stored audio, or, “Live” may  
be chosen which will exit the Instant Replay  
mode, and the Receiver will resume playing the  
live broadcast.  
Receiver to continue to move forward in the  
stored audio to the start of each next song or  
program until the end of the stored audio is  
reached. When the end of the stored audio is  
reached, a beep will be heard (if the  
Confirmation Tone option is enabled), the Instant  
Replay mode will be exited, and the Receiver  
will resume playing the live broadcast.  
Pressing and holding the Fast-Forward button  
for one second advances the playback forward  
in 10 second intervals, which increases to 15  
and then 30 second intervals the longer the  
Fast-Forward button remains pressed. Playback  
begins immediately when the button is released.  
When the end of the stored audio is reached, a  
beep will be heard, the Instant Replay mode will  
be exited, and the Receiver will resume playing  
the live broadcast.  
REPLAY LIST  
REPLAY LIST  
Live  
Live  
Song Title  
Song Title  
Song Title  
Artist  
Artist  
Artist  
Fast Forward button. The fast forward button  
forwards you through the stored audio.  
Pressing and releasing the Fast-Forward button  
forwards to the start of the next song or  
program in the stored audio, and playback  
automatically begins. Repeatedly pressing and  
releasing the Fast-Forward button causes the  
Rewind button. The rewind button rewinds  
(moves you backwards) through the stored  
audio.  
Pressing and releasing the Rewind button  
rewinds to the start of the current song or  
32  
ST2 Starmate Replay User and Installation Guide  
program in the stored audio, and playback  
automatically begins. Repeatedly pressing and  
releasing the Rewind Button causes the  
Receiver to continue to move backwards in the  
stored audio to the start of each previous song  
or program until the beginning of the stored  
audio is reached. If the beginning of the stored  
audio is reached, a beep will be heard (if the  
Confirmation Tone option is enabled) and  
playback will automatically begin.  
Note: Depending upon where in a particular  
broadcast the channel was selected, the start of  
a song or program may not be available in  
memory. If this occurs, the playback will start  
from where the audio began to be stored.  
automatically begin.  
Using Instant Replay  
To begin using the Instant Replay feature of the  
Receiver, press the Pause/Play button. This causes  
the Receiver to enter the Instant Replay pause  
mode, which mutes the audio from the Receiver. A  
“Paused” message will be displayed for two  
seconds to confirm that the Receiver has entered  
the Instant Replay mode.  
001 Ch. Name-00:00:03  
Artist Name  
Paused  
To listen to the audio that was stored, press the  
Play/Pause button again and the Receiver will begin  
to play back the audio stored in the Instant Replay  
memory from the point where you pressed the Play/  
Pause button.  
As you are listening to the playback of the stored  
audio, you may either fast forward or rewind through  
the stored audio by pressing the fast-forward or  
rewind buttons, without having to press the Play/  
Pause button first. Refer to the previous sections  
Pressing and holding the Rewind button for one  
second rewinds playback in 10 second  
intervals, which increase to 15 and then 30  
second intervals the longer the Rewind button  
remains pressed. Playback begins immediately  
when the button is released. If the beginning of  
the stored audio is reached while rewinding, a  
beep will be heard and playback will  
33  
ST2 Starmate Replay User and Installation Guide  
describing the Rewind and Fast-Forward buttons for  
specific instructions for their use.  
Rewind mode. This indicates that you are  
rewinding, or moving backwards, through the stored  
Instant Replay audio.  
Note: If the Receiver is tuned to another channel  
while in the Instant Replay mode, the Instant Replay  
mode is exited, all the audio stored in the Instant  
Replay memory is erased, and the tuned channel  
begins to play. Also note that tuning to another  
channel may automatically occur if another feature  
of the Receiver has been programmed to do so.  
When the Instant Replay mode is active, status  
information is shown at the bottom of the Receiver’s  
display screen.  
Instant Replay Time Position  
001 Ch. Name-00:00:00  
Artist Name  
Song Title  
The Instant Replay mode icon that is displayed at  
the bottom left of the screen indicates the current  
mode.  
Progress Bar  
Play Position Indicator  
Instant Replay Mode  
Pause mode. This indicates that the Receiver is  
The Progress Bar is a visual indicator of the status  
of the Instant Replay memory.As the memory fills,  
Progress Bar begins to fill from the left side  
providing a visual indication of how much of the  
Instant Replay memory is filled. The end of the bar  
indicates the end of the stored audio, where the live  
broadcast begins. When all available memory has  
paused and muted.  
Play mode. This indicates that you are in the  
Instant Replay playback mode, listening to stored  
audio.  
Fast Forward mode. This indicates that you are  
fast forwarding through the stored Instant Replay  
audio.  
34  
ST2 Starmate Replay User and Installation Guide  
been used, the bar will be completely filled.  
The Play Position indicator shows your current  
listening position in the stored audio. When you  
press the Play/Pause button to begin playback of  
the stored audio, this indicator will begin to move to  
the right showing the progression of the playback  
through the Instant Replay memory, provided that  
the memory is not full.  
Progress Bar Showing  
Amount of Memory Filled  
End of Stored Audio  
Beginning of Live Broadcast  
001 Ch. Name-00:20:03  
Artist Name  
Play Position Indicator  
Song Title  
001 Ch. Name-00:20:03  
Artist Name  
A diamond-shaped Play Position indicator is  
superimposed over the Progress Bar which  
provides a visual indicator of the current playback  
position in the Instant Replay memory.  
Song Title  
The portion of the Progress Bar behind the Play  
Position indicator shows how much you can rewind  
in the Instant Replay memory, while the filled portion  
ahead of the Play Indicator shows how much you  
can fast-forward in the memory.  
While you are in the playback mode, the Receiver  
continues to store the audio from the channel.  
Obviously, you will be unable to “catch up” to the live  
broadcast during playback, as new audio is being  
Play Position Indicator  
001 Ch. Name-00:20:03  
Artist Name  
Song Title  
35  
ST2 Starmate Replay User and Installation Guide  
stored at the same rate at which you are playing  
back the stored audio. You can use the Fast-  
Forward button to skip ahead or exit the Instant  
Replay mode, and begin listening to the live  
broadcast again.  
the left-most position, indicating that the memory is  
full, the Receiver will automatically begin playback.  
Time Position of  
Play Position Indicator  
Should you press the Play/Pause button to stop the  
playback, the play position indicator will stop moving  
and continue to provide a visual indication of your  
current position in the Instant Replay memory.  
When the Instant Replay memory is 10 seconds  
from becoming full, two beeps will be heard (if the  
Confirmation Tone option is enabled). When the  
memory is full, the Receiver will automatically begin  
playback, and will continue to store the channel  
audio, overwriting the oldest portion of the audio  
previously stored. When the memory is full, you will  
be unable to rewind through the stored audio.  
If you have partially played back the stored audio,  
and have paused the Receiver again, the Play  
Position indicator will begin to move left when the  
Instant Replay memory becomes full, as it begins  
overwriting the oldest portion of the audio previously  
stored. When the Play Position indicator reaches  
001 Ch. Name-00:00:00  
Artist Name  
Song Title  
Play Position Indicator  
The Instant Replay Time Position provides the exact  
amount of time the Play Position indicator is behind  
the live broadcast, expressed as  
Hours:Minutes:Seconds, and displayed as a  
negative number. For example, if -02:40 is  
displayed, this would indicate that the Play Position  
indicator is 2 minutes and 40 seconds behind the  
live broadcast.  
36  
ST2 Starmate Replay User and Installation Guide  
FM Preset Button  
The Receiver has a special button called the FM  
Preset button, which is identified by the  
FM Presets  
FM1 88.1 MHz  
FM2 <EMPTY>  
FM3 <EMPTY>  
FM4 <EMPTY>  
icon.  
When the FM Preset button is pressed, the  
Receiver turns on the built-in FM transmitter and  
begins transmitting on the next frequency from the  
FM frequency preset list. Ascreen will be displayed  
for 3 seconds showing the currently selected FM  
frequency. When the FM transmitter is turned on, an  
FM radio tuned to the same FM frequency will  
receive the currently tuned SIRIUS broadcast. Each  
subsequent press of the FM Preset button advances  
to the next frequency in the FM frequency preset list.  
Using the FM Preset button, a quiet FM frequency  
may be quickly tuned.  
You can use the channel up and down buttons to  
scroll through the FM preset list and highlight the  
preset you wish to change, and press the Select  
button to choose the preset. Use the channel up and  
down buttons to highlight the frequency you wish to  
select for the preset and press the select button.  
The FM frequency will then be stored in the preset.  
To select the preset and exit, press the MENU  
button.  
You may also change the FM presets by using the  
FM Presets menu option of the Receiver. (Refer to  
the FM Transmitter section in the Menu Options  
section of this manual for instructions on  
If no FM frequencies have been preset when the FM  
Preset button is pressed, the Receiver will default to  
a frequency of 88.1 MHz.  
programming the FM frequency preset list.)  
Pressing and holding the FM Preset button will  
cause a list of the FM presets to be displayed.  
Menu Options  
To enter the Menu Options page of the Receiver,  
press the MENU button. The “Menu Options” list will  
be displayed.  
37  
ST2 Starmate Replay User and Installation Guide  
transmitter On and Off.  
Menu Options  
FM Transmitter  
Game Alert  
FM Transmitter  
Settings  
Time Based Features  
FM Presets  
FM On/Off  
To select a menu option, use the channel up and  
down buttons to highlight the option you wish to  
adjust, and press the select button. If a selection is  
not made within 10 seconds, the Receiver will exit  
the menu options screen, and revert to the last  
active display mode.  
To exit the Menu Options screen, or any of the other  
menu option screens, repeatedly press and release  
the MENU key until you are returned to the default  
display screen.  
FM Presets  
To create or add to a list of FM Preset frequencies ,  
do the following:  
1. Using the channel up and down buttons,  
highlight the “FM Presets” menu item and press  
the select button. Alist of the FM presets will be  
displayed. (You may also enter this list by  
pressing and holding the FM Preset button.)  
The following sections explain each of the menu  
options in the order in which they are displayed on  
the Menu Options screen.  
FM Presets  
FM1 88.1 MHz  
FM2 <EMPTY>  
FM3 <EMPTY>  
FM4 <EMPTY>  
2. Using the channel up and down buttons,  
highlight the FM preset you wish to set (or  
change) and press the select button. A list of FM  
frequencies will be displayed, beginning with the  
currently selected FM frequency for the preset.  
FM Transmitter  
The FM Transmitter feature allows you to create a  
preset list of 5 suitable FM frequencies which can  
then be accessed by using the FM Preset button.  
This option also allows you to turn the FM  
38  
ST2 Starmate Replay User and Installation Guide  
<EMPTY>  
88.1 MHz  
88.3 MHz  
88.5 MHz  
88.7 MHz  
FM On/Off  
FM On  
FM Off  
3. Use your FM radio to locate quiet FM  
Use the channel up and down buttons to highlight  
“FM On” or “FM Off”, and press the select button.  
To exit the FM On/Off menu, press the MENU  
frequencies where there is no interference from  
adjacent FM stations. These are the frequencies  
which should be added to the FM Presets list.  
4. Using the channel up and down buttons,  
highlight the frequency you wish to select for the  
preset and press the select button. The FM  
frequency will then be stored in the preset. If you  
do not want a frequency for the preset, choose  
EMPTY from the menu and press the select  
button.  
button.  
Game Alert  
The GameAlert feature allows you to store your  
favorite sports teams in memory. The Receiver will  
constantly scan the SIRIUS channels and will sound  
an alert when a sports team you had stored in  
memory is playing, or when there is a score update  
for a team, depending on which option you have  
chosen for the sports team.  
Sports teams which you have selected and which  
are currently playing will be displayed in a category  
called “My Game Zone”.  
5. You may then continue to select FM frequencies  
for other presets using the same steps. To exit  
the FM Presets menu, press the MENU button.  
FM On/Off  
To turn the Receiver’s FM transmitter On or Off, use  
the channel up and down buttons to highlight the  
“FM On/Off” menu item and press the select button.  
You may select one sports team from each sports  
league and the college category using the Game  
Alert option, however, more teams may be chosen  
39  
ST2 Starmate Replay User and Installation Guide  
by using the Memory (MEMO) function. (See the  
section titled, Memory (MEMO) and Song Seek (S-  
Seek) Functions for more information about adding  
additional teams.)  
To choose sports teams to add for game alerts, do  
the following:  
Note that for college teams, you will receive an  
alert for all teams playing for that college.  
4. Use the channel up and down buttons to  
highlight which type of an alert you want, and  
press the select button.  
Alert Type  
1. Use the channel up and down buttons to highlight  
“Game Alert” and press the select button.  
2. Use the channel up and down buttons to  
highlight the sports league or college category of  
the sports team you wish to add, and press the  
select button.  
Initial Game Alert  
All Score Updates  
When the Receiver is powered on, and while it  
is playing, “Initial GameAlert’ will sound an alert  
when the team you have chosen is playing a  
game. “All Score Updates” does the same but  
also sounds an alert when the scores are  
updated for the chosen team.  
Game Alert  
NFL  
NBA  
NHL  
COLLEGE  
To exit the Game Alert menu, press the MENU  
button.  
3. Use the channel up and down buttons to highlight  
the league team name or college team name you  
wish to add, and press the select button.  
Settings  
The following sections explain each of settings  
menu options in the order in which they are  
displayed.  
NFL  
COLLEGE  
None  
None  
Arizona Cardinals  
Atlanta Falcons  
Baltimore Ravens  
Alabama  
Auburn  
Colorado  
40  
ST2 Starmate Replay User and Installation Guide  
Traffic  
Settings  
Jump Setting  
Display Options  
Memory Options  
Auto Select  
To set the Jump button to provide a traffic report  
when pressed, do the following:  
1. Use the channel up and down buttons to  
highlight the “Traffic” option, and press the  
select button.  
2. A screen showing a list of cities will be  
displayed.  
To select a menu option, use the channel up and  
down buttons to highlight the option you wish to  
adjust, and press the select button.  
Jump Settings  
The Jump setting controls the actions of the Jump  
button. The Jump setting menu may also be  
accessed by pressing and holding the Jump button.  
Traffic Market  
Atlanta  
Baltimore  
Boston  
Chicago  
Jump Setting  
Jump Setting  
Use the channel up and down buttons to  
highlight the city for which you wish to have a  
traffic report and press the select button.  
3. If the city list has not yet been updated, a  
message will be displayed indicating that the  
city list is updating. Wait 10 minutes and then try  
again.  
Choose one of the  
following options  
Traffic: ATL  
for  
button  
Jump Set  
Two options are available for the Jump setting,  
“Traffic” and “Jump Set’. The currently selected  
option is indicated by the Jump icon.  
The Traffic option sets the function of the Jump  
button to provide a traffic report for a selected city,  
while the JumpSet option assigns any channel to  
the Jump button.  
Traffic Market  
Atlanta  
Updating City List  
41  
ST2 Starmate Replay User and Installation Guide  
To exit the Jump Settings menu, press the MENU  
button.  
Jump Setting  
Traffic: NONE  
JumpSet  
JumpSet  
To set the Jump button to a specific channel (other  
than a traffic channel) when pressed, do the  
following:  
The channel selected is now assigned to the  
Jump button.  
To exit the Jump settings menu, press the MENU  
1. Use the channel up and down buttons to  
highlight the “JumpSet” option, and press the  
select button.  
button.  
At any time while listening to a channel (other than a  
traffic channel), the channel may be assigned to the  
Jump button by simply pressing and holding the  
Jump button for 2 seconds.  
2. The following screen will be displayed:  
Jump Setting  
Tune to desired Ch.  
press & hold  
Display Options  
The Receiver’s display screen can be adjusted for  
the  
button  
brightness and contrast using the Display Options.  
Use the channel up and down buttons to tune to  
the channel you want assigned to the Jump  
button. When the channel is tuned, press and  
hold the Jump button for 2 seconds until the  
following screen is displayed.  
Display Options  
Brightness  
Contrast  
Use the channel up and down buttons to highlight  
the “Brightness” or “Contrast” option, and press the  
select button.  
42  
ST2 Starmate Replay User and Installation Guide  
Brightness adjusts the overall intensity of the LCD  
display to help with viewing in different lighting  
conditions. Contrast adjusts the relationship  
between the background and the text on the LCD  
display. Use the channel up and down buttons, to  
adjust the brightness/contrast. The bar graph will  
move to indicate the change.  
Automatic Memory Search  
To turn the automatic memory search On or Off, do  
the following:  
1. Use the channel up and down buttons to  
highlight “Auto Memory Search”, and press the  
select button.  
2. Use the channel up and down buttons to  
highlight either “On” or “Off”, and press the  
select button.  
Brightness  
Contrast  
-
+
-
+
Auto Memory Search  
On  
To exit the Brightness/Contrast screen, press the  
MENU button.  
Off  
To exit the Memory Options menu, press the MENU  
button.  
Memory Options  
The Memory Options feature allows you to set  
whether the automatic S-Seek feature is On or Off,  
and also provides the a way to clear (erase) all the  
stored S-Seek alerts from memory.  
Clear All Memory  
To clear all the S-Seek alerts stored in memory, do  
the following:  
1. Use the channel up and down buttons to  
highlight “ClearAll Memory”, and press the  
select button.  
Memory Options  
Auto Memory Search  
Clear All Memory  
2. At the confirmation screen, use the channel up  
43  
ST2 Starmate Replay User and Installation Guide  
and down buttons to highlight “Yes”, and press  
the select button.  
To change Auto Select setting to On or Off, use the  
channel up or down buttons to highlight “On” or  
“Off”, and press the select button.  
Clear All Memory?  
Auto Select  
Yes  
No  
On  
Off  
The S-Seek memory is now erased.  
To exit the Memory Options menu, press the MENU  
button.  
To exit the Auto Select menu, press the MENU  
button.  
Auto Select  
Audio Level  
Auto Select chooses whether the Receiver  
immediately tunes to a channel when a channel is  
highlighted, or whether you must first press the  
select button in order to tune to a highlighted  
channel in any of the list modes. Turn Auto Select  
On if you would like the Receiver to automatically  
tune to the highlighted channel without you having to  
press the select button. This will allow you to quickly  
listen to all the available programming in any  
displayed channel list.  
TheAudio Level setting adjusts the level of the audio  
output of the Receiver.  
To adjust the audio level, use the channel up and  
down buttons to change the audio level. The bar  
graph will move to indicate the change.  
Audio Level  
-
+
To exit theAudio Level menu, press the MENU  
button.  
The default setting for Auto Select is Off, meaning  
that you must press the select button to tune to a  
channel in a listing.  
44  
ST2 Starmate Replay User and Installation Guide  
When access to a locked channel is attempted  
using the direct channel entry method, the “Enter  
Code” screen is displayed and the channel cannot  
be accessed until the correct code is entered.  
Confirmation Tone  
The Receiver will sound an audio tone alert when it  
is powered On or Off, as well as when an S-Seek  
alert is activated and other alerts. The default setting  
is On. To change the Confirmation Tone setting to  
On or Off, use the channel up or down buttons to  
highlight “On” or “Off”, and press the select button.  
Enter Code  
# ____  
Confirm. Tone  
If the wrong code is entered, a message will be  
displayed indicating that the wrong code has been  
entered.  
On  
Off  
To exit the Confirmation Tone menu, press the  
MENU button.  
Enter Code  
Wrong Code  
Parental Control  
The Receiver has the ability to lock out with  
password protection any channels you do not want  
others to access without your permission. A locked  
channel will not appear in the channel list.  
Lock/Unlock  
To lock or unlock a channel, do the following:  
1. Use the channel up and down buttons to  
highlight “Lock/Unlock, and press the select  
button.  
2. If this is the first time that Parental Control is  
being used, you will be prompted to create and  
Parental Control  
Lock/Unlock  
Edit Code  
45  
ST2 Starmate Replay User and Installation Guide  
will have the word “Lock” displayed to the right  
enter a four digit numerical code. This code can  
of the channel name.  
be any four digit number from 0000 to 9999.  
Lock/Unlock  
001 Channel Name  
002 Channel Name  
003 Channel Name Lock  
004 Channel Name  
Enter Code  
# ____  
5. To lock or unlock a channels, use the channel up  
and down buttons to highlight a channel, and press  
the select button.  
If you are locking a channel, the word “Lock” will be  
displayed to the right of the channel name. If you  
are unlocking a channel, the word “Lock” will be  
removed from the right of the channel name.  
To exit the Parental Control menu, press the MENU  
button.  
If you should exit this prompt without entering a  
code, you will be prompted to set a code next  
time you enter the Lock/Unlock option.  
3. If a code has been previously set, a “Enter  
Code” prompt will be displayed. Enter your four  
digit code and press the select button to  
continue.  
Enter Code  
# ____  
Edit Code  
This setting allows you to change a previously  
selected Parental Control code.  
4. When the correct code has been entered, a  
listing of channels will be displayed. Use the  
channel up and down buttons to navigate to the  
channel you wish to lock or unlock, and press  
the select button. Apreviously locked channel  
The first time the Edit Code setting is accessed you  
will be prompted to enter a four digit code. This code  
can be any four digit number from 0000 to 9999.  
46  
ST2 Starmate Replay User and Installation Guide  
Enter Code  
Wrong Code  
Enter Code  
# ____  
4. If the correct code was entered, the “New  
Code” prompt will appear. Enter the new  
Parental Control code.  
If you should exit this prompt without entering a  
code, you will be prompted to set a code the next  
time you enter the Edit Code option.  
New Code  
# ____  
To change the Parental Control code, do the  
following:  
1. Use the channel up and down buttons to  
highlight “Edit Code”, and press the select  
button.  
2. At the prompt, enter the four digit Parental  
Control code.  
5. You will then be prompted to confirm the new  
code by entering it again.  
Confirm Code  
# ____  
Enter Code  
# ____  
6. If you confirmed the correct code, the lock code  
is now changed and a confirmation screen is  
displayed. If you entered the wrong code at the  
confirmation prompt, a screen will be displayed  
to alert you that you have entered the wrong  
code, and you will have to repeat the process  
again.  
3. If you did not enter the correct code, a message  
will be displayed alerting you that the wrong  
code was entered, and you will be prompted  
again to enter the code.  
47  
ST2 Starmate Replay User and Installation Guide  
Confirm Code  
Wrong Code  
Confirm Code  
Code Saved  
Time Features  
Clock  
Alarm  
Program Alert  
Auto Shutdown  
To exit the Parental Control menu, press the MENU  
To select a menu option, use the channel up and  
down buttons to highlight the option you wish to  
adjust, and press the select button.  
button.  
If you have forgotten your Parental  
Control code, call SIRIUS Customer  
Service for help.  
Clock  
The time data for the Receiver’s clock is provided  
via the SIRIUS signal, and will update based on the  
data received from the signal.  
You can configure the clock format for 12-hour or  
24-hour display format, set the time zone for the  
clock for your location, and turn On or Off the  
automatic adjustment for Daylight Savings Time  
(DST).  
Time Based Features  
These settings allow for adjustment of the following  
features of the Receiver:  
Clock - Sets the clock format, time zone, and  
daylight savings time function.  
Alarm - Sets an alarm for a specific time.  
Program Alert - Sets the Receiver to tune to a  
specific channel at a specified time.  
Auto Shutdown - Sets the Receiver to turn off at  
Clock  
Format  
Time Zone  
Daylight Savings Time  
a specified time.  
Sleep Mode - Sets the Receiver to turn off after a  
designated period of time.  
48  
ST2 Starmate Replay User and Installation Guide  
Format  
Time Zone  
To change the clock display format of the Receiver  
to 12 hour or 24 hour format, do the following:  
(GMT -6:00) Central  
(GMT -5:00) Eastern  
(GMT -4:30) Atlantic  
(GMT -3:30) Newfndlnd  
1. Use the channel up and down buttons to  
highlight “Clock” and press the select button.  
2. Use the channel up and down buttons to  
highlight either “12 hour” or “24 Hour”, and press  
the select button.  
To exit the Time Zone menu, press the MENU  
button.  
Daylight Savings Time  
To turn the Daylight Savings Time feature On or Off,  
do the following:  
Format  
1. Use the channel up and down buttons to  
highlight “Daylight Savings Time”, and press the  
select button.  
2. Use the channel up and down buttons to  
highlight “DST Observed” or “DST Not  
Observed”, and press the select button.  
12 Hour  
24 Hour  
To exit the Clock menu, press the MENU button.  
Time Zone  
To change the time zone of the Receiver, do the  
following:  
Daylight Savings Time  
1. Use the channel up and down buttons to  
highlight “Time Zone”, and press the select  
button.  
2. Use the channel up and down buttons to  
highlight the proper time zone for your location,  
and press the select button.  
DST Observed  
DST Not Observed  
To exit the Daylight Savings Time menu, press the  
MENU button.  
49  
ST2 Starmate Replay User and Installation Guide  
Alarm  
Alarm Time  
This feature allows you to set an alarm to sound at a  
specific time each day, and to turn the alarm feature  
On or Off.  
To set the time of the alarm, do the following:  
1. Use the channel up and down buttons to  
highlight “Alarm Time”, and press the select  
button.  
2. Use the channel up and down buttons to change  
the minutes, and the category previous and next  
buttons to change the hours, to select the  
desired alarm time.  
Alarm  
Set Alarm  
Alarm Time  
SetAlarm  
Alarm Time  
12:00 PM  
To turn the alarm On or Off, do the following:  
1. Use the channel up and down buttons to  
highlight “Set Alarm”, and press the select  
button.  
2. Use the channel up and down buttons to  
highlight “Alarm On” or “Alarm Off”, and press  
the select button.  
3. When you have selected the desired alarm time,  
press the select button to set the alarm time  
and exit.  
To exit the Alarm Time menu, press the MENU  
button.  
Set Alarm  
On  
Program Alert  
Off  
The Program Alert feature allows you to program the  
Receiver to automatically tune to a specific channel  
at a specific time. The Receiver must be powered  
To exit the Set Alarm menu, press the MENU button.  
50  
ST2 Starmate Replay User and Installation Guide  
on in order for this feature to function.  
you wish to tune to the specified channel.  
Program Alert  
Program Time/Day  
Channel Number  
Program Time  
12:00 PM  
Program Alert On/Off  
4. When you have selected the desired time,  
press the select button to set the time and exit.  
5. At the “Program Time/Day” screen, use the  
channel up and down buttons to highlight “Day”,  
and press the select button.  
6. Using the channel up and down buttons, select  
the day of the week you wish to tune to the  
selected channel, i.e., Monday, Tuesday, etc.,  
and press the select button.  
Program Time/Day  
To program the time and day when the receiver will  
tune to the specified channel, do the following:  
1. Use the channel up and down buttons to  
highlight “Program Time/Day”, and press the  
select button.  
2. At the “Program Time/Day” screen, use the  
channel up and down buttons to highlight  
“Time”, and press the select button.  
Program Day  
Monday  
Program Time/Day  
Time  
Day  
To exit the Program Time/Day menu, press the  
MENU button.  
3. Use the channel up and down buttons to change  
the minutes, and the category previous and next  
buttons to change the hours, to select the time  
51  
ST2 Starmate Replay User and Installation Guide  
Channel Number  
following:  
To set the channel to which the receiver will tune  
when the Program Alert feature is On, do the  
following:  
1. Use the channel up and down buttons to  
highlight “Program Alert On/Off”, and press the  
select button.  
1. Use the channel up and down buttons to  
highlight “Channel Number”, and press the  
select button.  
2. Use the channel up and down buttons to  
highlight “Program Alert On” or “ProgramAlert  
Off”, and press the select button.  
2. When the default display screen is displayed,  
use the channel up and down buttons to  
navigate to the channel which you wish to select  
for the ProgramAlert feature. Use the category  
previous and next buttons to navigate between  
categories. When the channel is displayed,  
press the select button.  
Program Alert On/Off  
On  
Off  
To exit the Program Alert On/Off menu, press the  
MENU button.  
Auto Shutdown  
001  
Channel Name  
You can set the Receiver to automatically power off  
after a 1 hour period of inactivity, that is, no buttons  
have been pressed for 1 hour.  
Artist Name  
Song Title  
Category 12:00P  
A  
When theAuto Shutdown feature is enabled, after  
59 minutes of inactivity, a beep tone will sound and a  
display prompt will appear on the screen, “Cancel  
Auto Shutdown”. At this point the auto shutdown can  
be reset to 1 hour of inactivity by pressing the select  
To exit the Channel Number menu, press the MENU  
button.  
Program Alert On/Off  
To turn the Program Alert feature is On or Off, do the  
52  
ST2 Starmate Replay User and Installation Guide  
button. If the Auto Shutdown is not reset, the  
Receiver will automatically power off.  
after a selected period of time, 15, 30, 45, or 60  
minutes.  
To activate or deactivate the Sleep Mode feature, do  
the following:  
001  
Channel Name  
Artist Name  
Cancel Auto Shutdown  
1. Use the channel up and down buttons to  
highlight “Sleep Mode”, and press the select  
button.  
2. Use the channel up and down buttons to select  
the desired time, 15, 30, 45, or 60 minutes to  
activate the Sleep Mode feature, or choose “Off”  
to cancel the sleep feature, and press the select  
button.  
Category 12:00P  
A
To enable or disable theAuto Shutdown feature, do  
the following:  
1. Use the channel up and down buttons to  
highlight “Auto Shutdown”, and press the select  
button.  
2. Use the channel up and down buttons to  
highlight “Enabled” or “Disabled”, and press the  
select button.  
Sleep Mode  
Off  
15 min  
30 min  
45 min  
Auto Shutdown  
Enabled  
To exit the Sleep Mode menu, press the MENU  
button.  
Disabled  
To exit theAuto Shutdown menu, press the MENU  
button.  
Signal Indicator  
The Signal Indicator display screen provides a visual  
display of the strength of the SIRIUS signal from the  
satellite antenna and also from terrestrial (ground)  
Sleep Mode  
The Receiver can be set to turn off automatically  
53  
ST2 Starmate Replay User and Installation Guide  
transmitters.  
• All Presets are cleared  
• All GameAlerts are cleared  
• Receiver set to Normal Tuning Mode  
• Display brightness set to 50%  
• Display Contrast set to 50%  
• FM Transmitter set to On  
• FM Frequency set to 88.1 MHz  
• All S-Seek memory cleared  
• Clock set to 12-Hour Format  
• Time Zone set to Eastern Standard Time  
• Daylight Savings Time set to Observed  
• Auto Shutdown set to Off  
To display the Signal Indicator screen, do the  
following:  
1. Use channel up and down buttons to highlight  
“Signal Indicator”, and press the select button.  
Signal Indicator  
SAT -  
TER -  
+
+
2. Two 10 segment horizontal bar graphs will be  
displayed with a “-“ sign to the left and a “+” sign  
to the right. SAT indicates the satellite signal  
strength while TER indicates the terrestrial  
signal strength, if a terrestrial signal is available.  
To exit the Signal Indicator menu, press the MENU  
button.  
• Sleep Mode set to Off  
• Auto Select set to Off  
• ProgramAlert cleared  
Note that the Parental Control feature is not affected  
by the Factory Default option. If a code has been set  
for the Parental Control feature, the code will not be  
reset by the Factory Default feature, preventing  
someone from circumventing the Parental Control  
feature. Channels which have been locked will  
remain locked.  
Factory Default  
The Factory Default option will restore most every  
feature of the Receiver to the original factory  
settings. The following is a list of all features  
affected by the Factory Default option:  
To activate the Factory Default feature, and restore  
54  
ST2 Starmate Replay User and Installation Guide  
the features of the Receiver to the factory defaults,  
do the following:  
original factory settings.  
Are You Sure?  
1. Use the channel up and down buttons to  
highlight “Factory Default”, and press the select  
button.  
Restoring  
Factory Defaults  
5. When the Factory Default is complete, the  
Receiver will place you in Channel 184 the SIRIUS  
preview channel and display, “Call 1-888-539-  
SIRIUS to Subscribe”. The Receiver is still  
subscribed to the SIRIUS service.  
2. Use the channel up and down buttons to select  
“Yes” to restore all settings to the settings from  
the factory, or select “No” to leave them as-is  
and return to the Menu Options menu.  
Restore Settings?  
Yes  
No  
3. If “Yes” is chosen, a confirmation is displayed.  
Use the channel up and down buttons to select  
“Yes” to restore all settings to the settings from  
the factory, or select “No” to leave them as-is  
and return to the Menu Options menu.  
Are You Sure?  
Yes  
No  
4. If Yes is chosen, the Receiver will revert to the  
55  
ST2 Starmate Replay User and Installation Guide  
Troubleshooting  
This section lists several common problems and suggested solutions. If, after trying the suggested solutions  
listed here, you are still unable to resolve the problem you’re having with your Receiver, contact your installer,  
dealer, or retailer for more help.  
Problem  
Cause and Suggested Solution  
Receiver does not power on  
Blown fuse, or the power cable is not properly connected. Check for a  
bad fuse and check power cable connection.  
Receiver displays:  
“ANTENNA NOT DETECTED”  
The satellite antenna is not connected to the Receiver. Check the  
satellite antenna connection to the Receiver.  
Audio static or loss of clarity  
FM frequency contains static. Locate a quiet FM frequency on your  
vehicle radio and set the Receiver’s FM transmitter frequency to  
match.  
The vehicle antenna is not connected to radio. Check vehicle antenna  
cable to be sure it is connected.  
Check for obstacles over or around satellite antenna. Change vehicle  
location to eliminate nearby obstacles (bridges, overpasses, etc.)  
Receiver displays:  
“ACQUIRING SIGNAL”  
No sound  
The audio cables are not connected, or the FM radio is set to the  
wrong frequency. Check the audio cables at the Receiver and the  
vehicle radio. Tune the vehicle FM radio to the same FM frequency  
the Receiver is tuned.  
56  
ST2 Starmate Replay User and Installation Guide  
Specifications  
Satellite Frequencies ............................................................................................. 2322.293/2330.207 MHz  
Terrestrial Frequencies ......................................................................................................... 2326.250MHz  
Power Requirements ...............................................................................9-16 Volts, Negative Ground, DC  
Audio Output ................................................................................ 2V (normal) 2.8V (max.) (Peak-to-Peak)  
Total Harmonic Distortion (THD) ....................................................................................................... <0.2%  
Signal-to-noise (S/N) ...................................................................................................... Greater than 73dB  
Fuse Requirement ......................................................................................................................... 2A ATC  
Receiver Dimensions (Width x Length x Height) ................................................. 128mm x 48mm x 19mm  
(5” x 1.9” x .75”)  
Receiver Weight ...................................................................................................................... 112g (4 oz.)  
Antenna Type............................................................................................................. Low Profile Magnetic  
Antenna Cable Length ............................................................................................ 21’ (single micro-cable)  
Connector Type............................................................................................................... SMB (right-angle)  
Audio Interface .................................................................................................... 1/8” / 3.5mm Stereo Jack  
FM Out Interface ..................................................................................................................... 2.5mm Jack  
Remote Control Dimensions (Width x Length x Height) ...................................... 41mm x 104mm x 15mm  
(1.61” x 4.09” x .59”)  
Remote Control Battery Requirements .......................................................................................... CR2025  
Note: Features and Specifications subject to change without notice.  
57  
ST2 Starmate Replay User and Installation Guide  
12 MONTH LIMITED WARRANTY  
SIRIUS Satellite Radio Inc. (the “Company”) warrants to the original retail purchaser of this product that should this product or any part  
thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original  
purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company’s option) without charge for  
parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of  
warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the location shown below under  
WARRANTYRETURN.  
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs  
incurred for installation, removal or reinstallation of the product, or to damage to tapes, compact discs, speakers, accessories, or  
vehicle electrical systems.  
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged  
through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial  
number/bar code label(s). THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR  
REPLACEMENT PROVIDEDABOVEAND, IN NO EVENT, SHALLTHE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID  
BY PURCHASER FOR THE PRODUCT.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED  
WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY  
ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY  
MUST BE BROUGHT WITHIN A PERIOD OF 48 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL  
THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY  
OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the  
Company any liability other than expressed herein in connection with the sale of this product. Some states do not allow  
limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the  
above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have  
other rights which vary from state to state.  
WARRANTY RETURN: To obtain repair or replacement within the terms of this Warranty, please return product to an  
authorized retailer or call Product Support at 1-800-869-5590; proof of purchase and description of defect are required. Products to be  
returned to an approved warranty station must be shipped freight prepaid.  
58  
ST2 Starmate Replay User and Installation Guide  
Please record the SIRIUS ID (SID) in the space provided below:  
SIRIUSID:  
SIRIUS Customer Service: 1-888-539-7474  
SIRIUS Product Support: 1-800-869-5590  
59  
ST2 Starmate Replay User and Installation Guide  
SIRIUS Satellite Radio Inc.  
1221 Avenue of the Americas  
New York, NY 10020  
1-888-539-7474  
ST2 (082406a)  

Vista 1 User Manual
Velodyne Acoustics Velodyne SC 600 IW User Manual
Trimble Outdoors 132RS User Manual
Sony WM FX153 User Manual
Sony DCR HC20 User Manual
Sony Camcorder DCR PC10 User Manual
Sony BDPBX39 User Manual
Sharp AQUOS BD HP80U User Manual
Samsung SCX RD100 User Manual
Rotel RD 550 User Manual