Digital Video Camcorder
VP-D6050(i)/D6050S(i)
VP-D6040(i)/D6040S(i)
Features .....................................................2
Notes and Safety Instructions....................3
Getting to Know Your Camcorder ..........4
Miscellaneous Information......................7
Basic Recording............................................8
Maintenance .......................................9
Troubleshooting ................................10
* Samsung Electronics’ Internet Home Page
Notes and Safety Instructions
Notices Regarding COPYRIGHT
Notes Regarding the Battery Pack
✤ Television programmes, movie video tapes, DVD titles, films and other programme
materials may be copyrighted. Unauthorised recording of copyrighted materials may
infringe on the rights of the Copyright owners and is contrary to copyright laws.
✤ All the trade names and registered trademarks mentioned in this manual or other
documentation provided with your Samsung product are trademarks or registered
trademarks of their respective holders.
✳ When the battery reaches the end of its life, please contact your local dealer.
Batteries must be disposed of as chemical waste.
✳ Be careful not to drop the battery pack when you release it from the camcorder.
Notes Regarding Video Head Cleaning
✤ To ensure normal recording and a clear picture, clean the video heads regularly. If a
square block-shaped distorts playback, or only a blue screen is displayed, the video
heads may be dirty. If this happens, clean the video heads with a dry type cleaning
cassette.
Notes Regarding Moisture Condensation
1. A sudden rise in atmospheric temperature may cause condensation to form inside the
camcorder.
✤ Do not use a wet-type cleaning cassette. It may damage the video heads.
For Example:
✤ Entering or leaving a heated place on a cold day might cause condensation inside the
product.
Notes Regarding the Lens
✤ To prevent condensation, place the product in a carrying case or a plastic bag before
exposing it to a sudden change in temperature.
✤ Do not film with the camera lens pointing directly at the sun.
Direct sunlight can damage the CCD (Charge Coupled Device, the imaging sensor).
2. If the
(DEW) protection feature is activated, leave the camcorder for at least two
Notes Regarding the Electronic Viewfinder
hours in a dry, warm room with the cassette compartment opened and the battery
removed.
1. Do not position the camcorder such that the viewfinder is pointing directly towards the
sun. Direct sunlight can damage the inside of the viewfinder. Be careful when setting
the camcorder in a sunny place or near a window exposed to sunlight.
2. Do not pick up the camcorder by holding the viewfinder.
Notes Regarding the CAMCORDER
1. Do not leave the camcorder exposed to high temperature (above 60°C or 140°F).
For example, in a parked closed car in summer or exposed to direct sunlight.
2. Do not let the camcorder get wet. Keep the camcorder away from rain, salt water, or
any other form of moisture. The product will be damaged if immersed in water or
subjected to high levels of moisture.
3. Applying excessive force to the viewfinder may damage it.
Notes Regarding ‘Record’ or ‘Playback’ Using the LCD
1. The LCD monitor has been
Notes Regarding the Battery Pack
manufactured using the high precision
technology. However, there may be
tiny dots (red, blue or green in colour)
that appear on the LCD monitor.
These dots are normal and do not
✤ Make sure the battery pack is fully charged before starting to record.
✤ To preserve battery power, keep your camcorder turned off when you are not operating it.
✤ If your device is in Camcorder mode, and it is left in STBY mode without being
operated for more than 5 minutes with a tape loaded, it will automatically turn itself off
to protect against unnecessary battery discharge.
✤ Make sure that the battery pack is attached firmly in place.
✤ The new battery pack provided with the product is not charged.
Before using the battery pack, you need to fully charge it.
✤ Do not drop the battery pack. Dropping the battery pack may damage it.
✤ It is a good idea to use the viewfinder rather than the LCD monitor when recording for
long periods, because the LCD monitor consumes more battery power.
✤ Fully discharging a Lithium-Ion battery damages the internal cells. The battery pack
may be prone to leakage when fully discharged.
✤ To avoid damage to the battery pack, make sure to remove the battery when no charge
remains.
affect the recorded picture in any way.
2. When you use the LCD monitor under direct sunlight or
outdoors, it maybe difficult to see the picture clearly. If this
occurs, we recommend using the viewfinder.
3. Direct sunlight can damage the LCD monitor.
Notes Regarding the Hand Strap
✤ To ensure a steady picture during filming, make sure that the
hand strap is properly adjusted.
✤ Do not force your hand into the hand strap as you could
damage it.
3
Getting to Know Your Camcorder
Front & Left View
1. Built-in MIC
2. Built-in Flash
3. Camcorder Lens
4. Camera Lens
6. Camera Mode Dial
7. Display Button
8. 5-way Button
1. Built-in MIC
2. Built-in Flash
5. Focus Button MF/AF
6. Mode Dial for Camera
7. Display Button
9. Menu Button
10. EasyQ Button
11. LCD Open
3. Camcorder Lens
8. 5-way Button
12. Remote Signal Receiver
9. Menu Button
10. EasyQ Button
13. Charge Indicator
11. LCD Open
4. Camera Lens
14. Navigation Wheel
(Quick Menu / Focus / Volume)
12. Remote Signal Receiver
13. Charge Indicator
14. Navigation Wheel (Quick Menu/Focus/Volume)
5. Focus Button MF/AF
Accessories Supplied with the Camcorder
Make sure that the following basic accessories are supplied with your digital video
camera.
Basic Accessories
1. Lithium Ion Battery Pack
2. AC Power Adapter
3. AC Power Cord
4. Multi-AV Cable
5. Instruction Book
6. Lithium battery for Remote Control and Clock
7. Shoulder Strap
8. USB Cable
4. Multi-AV Cable
1. Lithium Ion Battery pack
5. Instruction Book
2. AC Power Adapter
(AA-E8 Type)
3. AC Power Cord
6. Lithium battery for Remote 7. Shoulder Strap
Control and Clock
8. USB Cable
(CR2025 type, 2EA)
9. Software CD
10. Remote Control
11. Memory Stick
12. Lens Cover
11. Memory Stick
12. Lens Cover
10. Remote Control
9. Software CD
Optional Accessory
13. Scart adapter (Option)
13. Scart Adapter
4
Getting to Know Your Camcorder
Rear & Left View
9. DV Cable Jack
1.
PLAY/STILL (FADE)
10. Multi-AV Cable Jack
11. DC Power in Jack
12. Viewfinder
2. STOP (BLC)
1.
PLAY/STILL (FADE)
2. STOP (BLC)
3.
4.
REW
Multiple Display
13. Battery Release
12. Viewfinder
3.
REW
5.
6.
Delete
FF
4.
Multiple Display
5.
Delete
FF
6.
7. Built-in Speaker
7. Built-in Speaker
8. USB Cable Jack
8. USB Cable Jack
9. DV Cable Jack
10. Multi-AV Cable Jack
11. DC Power in Jack
13. Battery Release
Rear & Right View
Memory Card slot
1. PHOTO
2. FOCUS ADJUST
3. Power Switch
4. START/STOP
5. Hand Strap Ring
6. SLOW SHUTTER
7. NIGHT CAPTURE
8. ZOOM LEVER
9. External MIC input jack
10. Memory Card Slot
11. Hand Strap
6. SLOW SHUTTER
Memory Stick
Memory Stick PRO
7. NIGHT CAPTURE
8. ZOOM LEVER
1. PHOTO
2. FOCUS ADJUST
9. External MIC input jack
SD/MMC
10. Memory Card Slot
3. Power Switch
4. START/STOP
(Usable MEMORY CARDs)
11. Hand Strap
5. Hand Strap Ring
5
Getting to Know Your Camcorder
Rear & Bottom View
1. Shoulder Strap Hook
2. Battery Release
3. Tripod
Receptacle
3. Tripod Receptacle
4. Tape Eject Slide Button
5. Lithium Battery Holder
6. Hand Strap Ring
1. Shoulder Strap
Hook
4. Tape Eject Slide
Button
5. Lithium Battery
Holder
7. Hand Strap Hook
2. Battery Release
6. Hand Strap Ring
7. Hand Strap Hook
Remote Control
1. PHOTO
13. (STILL)
14. (SLOW)
1. PHOTO
18. DISPLAY
17. ZOOM
2. START/STOP
3. SELF TIMER
4. ZERO MEMORY
5. PHOTO SEARCH
6. A.DUB
2. START/STOP
3. SELF TIMER
4. ZERO MEMORY
5. PHOTO SEARCH
6. A.DUB
15. DATE/TIME
16. X2
17. ZOOM
16. X2
15. DATE/TIME
18. DISPLAY
7.
(FF)
(REW)
14.
(SLOW)
8.
7.
8.
(FF)
9. (PLAY)
13. (STILL)
12. (STOP)
11. F.ADV
(REW)
9. (PLAY)
10. DIRECTION (
11. F.ADV
10. DIRECTION(
)
,
)
,
12. (STOP)
6
Miscellaneous Information
Connecting to Other Devices – TV and VCR
Connecting to a TV Set Through a VCR
✤ You can connect your device to a TV set directly or through a VCR to view your recordings
and pictures on the TV screen, using the Multi-AV cable.
✤ You can connect your device to a PC to copy or move your recordings and pictures to the
hard disk drive, using the USB cable or the DV cable.
✤ If there are no input terminals for external devices on your TV set and a VCR is
connected to your TV set using a coaxial cable, you can utilize the VCR to connect your
camcorder to the TV set.
✤ You can connect your device to other DV-enabled devices using the DV cable.
I To Connect to a VCR that is Connected to Your TV Set
1. Connect the Multi-AV cable to your
I To Connect to a TV set
Video input (Y)
Audio input (L)
VCR
camcorder’s multi-AV jack.
Audio input (R)
CAMCORDER
1. Connect the Multi-AV cable to your camcorder’s multi-AV jack.
S-VIDEO
input
2. Connect the Multi-AV cable to the External
Inputs (LINE-IN) on the VCR by matching
the colours of the terminals.
2. Connect the Multi-AV cable to the external input terminal of your TV set by matching the
colours of the terminals.
TV
MULTI-AV
ANTENNA
3. Connect the TV and VCR using the coaxial
I To Play Back Recorded Video
cable. Refer to the Video or TV’s instruction book for further connection details.
1. Turn your TV on and select the external input
Audio input
Video input-
4. Set the input source of the VCR to the external input source connected to your
camcorder.
source connected to your camcorder.
(left)-White
Audio input
(right)-Red
Yellow
TV
Camcorder
S-VIDEO input
2. Locate the desired position on the tape using the
(REW) or
(FF) button.
I To Play Back Recorded Video
3. Press the
(PLAY/STILL) button of the
1. Turn your TV on and select the external input source that is connected to the VCR.
Set the TV channel to view the VCR. 3 or 4 is most often used.
MULTI-AV
camcorder to start playback.
4. To stop the playback, press the (STOP) button.
2. Locate the desired position on the tape using the
(REW) or
(FF) button.
3. Press the (PLAY/STILL) button of the camcorder to start playback.
Reference
4. To stop the playback, press the (STOP) button.
Reference
✤ Some TV sets have LINE-IN input terminals instead of External Input terminals. Refer to the
manufacturer’s instructions for detailed information on connecting external devices.
✤ If a TV set has an S-VIDEO input terminal, you may use S-VIDEO for better quality.
✤ If you use an S-VIDEO cable, you will need to connect an audio cable.
✤ If only a mono audio input is available on the TV set, use the audio cable with the white
plug.
✤ If the VCR has an S-VIDEO input terminal, you may use S-VIDEO for better quality.
✤ The S-VIDEO terminal transmits video only. Connect AUDIO cables for sound.
✤ If only a mono audio input is available on the TV set, use the audio cable with the white
plug.
7
Basic Recording
Making your First Recording
Playing Back a Tape You Have Recorded Using the LCD Monitor
✤ You can monitor the recorded image on the LCD monitor.
1. Turn on your camcorder and set the Power Switch to PLAY mode.
2. Insert the tape you want to playback (refer to page 47).
Recording
1
2
3
Before you begin!
-
-
-
-
Insert the Lithium Ion Battery (refer to page 28)
Charge your battery (refer to page 28)
Set the Clock (refer to page 38)
Insert a cassette tape (refer to page 47)
3. Open the LCD monitor and adjust the angle of the screen. Adjust
the LCD Brightness or Colour if necessary (refer to page 33).
1. Turn on your camcorder and set the Power Switch to REC mode.
2. Open the LCD or viewfinder and frame your subject on the screen.
3. To Start recording, press the START/STOP button.
4. Press the
(REW) button to rewind the tape to the desired
viewing point.
To stop rewinding, press the (STOP) button. The camcorder will
automatically stop rewinding when the tape is fully rewound.
I
The REC indicator is displayed on LCD.
5. Press the
(PLAY/STILL) button to start the playback.
4. To Stop recording, press the START/STOP button again.
The STBY indicator is displayed on LCD.
You can view the recording on the LCD.
To stop the playback, press the (STOP) button.
I
Reference
✤ If the Write Protection Tab on the cassette tape is set to protect,
the “PROTECTION!” message appears on the screen. Release
the Write Protection Tab to record.
Reference
✤ You can also view the recording on a TV screen, by connecting
the camcorder to a TV or VCR (refer to page 145).
✤ For searching and viewing still images recorded onto tape, refer to page 76.
✤ Various functions are available in PLAY mode (refer to page 74).
✤ Detach the Battery Pack when you finished recording to prevent unnecessary battery
power consumption.
When a cassette is loaded and the camcorder is left in STBY under REC mode for more than
5 minutes without being used, it will switch off automatically.
To resume the camcorder, press the START/STOP button or set the Power Switch to off
shortly and then set it back to REC mode.
This Auto Power Cut feature is designed to save the battery power.
Record Search (REC SEARCH)
✤ You can view a recording using the REC SEARCH +, – function
while in STBY mode.
I
I
REC SEARCH – enables you to play the recording backwards and
REC SEARCH + enables you to play it forwards, for as long as
you keep either button pressed down.
✤ If you press the REC SEARCH – button just once while in STBY
mode, your camcorder will play in reverse for 3 seconds and then
automatically return to the original position.
Reference
✤ Mosaic shaped distortion may appear on the screen while in
Record Search mode.
8
Maintenance
Cleaning and Maintaining the Camcorder
✤ For prolonged use of your device, read following instructions carefully.
Cleaning the Camera Body and Video Heads
I To Clean the Exterior of Your Device
After Using Your Camcorder
ꢀ To clean the exterior, use a soft dry cloth. Wipe the body gently. Do not apply excessive
I For the safekeeping of your device, follow these steps.
ꢀ Remove the cassette (refer to page 47).
ꢀ Turn your camcorder off.
ꢀ Remove the Battery (refer to page 28).
ꢀ Remove the Memory Card (refer to page 83)
force when cleaning, gently rub the surface.
ꢀ The LCD monitor surface should not be pressed. Use a soft dry cloth to clean the surface.
ꢀ To clean the lens, use an optional air blower to blow out dirt and other small objects. Do
not wipe the lens with cloths or your fingers. If necessary, use lens cleaning paper.
ꢀ Do not use chemicals, alcohol or benzene for cleaning. Otherwise, the finish may be
damaged.
I To prevent any damage to the LCD monitor, do not apply excessive force on its moving
parts.
ꢀ Cleaning should be done only after the battery pack has been removed, and other power
sources have been disconnected.
I Do not drop or in anyway shock the device.
I For prolonged use of your device, avoid using it in places subject to excessive humidity or
dust.
I Do not leave your device in places subject to:
ꢀ Excessive humidity, steam, soot or dust
ꢀ Excessive shock or vibration.
ꢀ Extremely high (over 50°C or 122°F) or extremely low (under 0°C or 32°F) temperatures.
ꢀ Strong electromagnetic fields.
I To Clean the Video Heads
ꢀ Dirty heads might cause
problems with noisy recording
and playback.
ꢀ To ensure normal operation of
the video heads, avoid using in
places subject to heavy dust.
(blue screen)
ꢀ Direct sunlight or in a closed car on a hot day.
ꢀ Avoid excessively frequent fast forwarding and rewinding of cassettes to avoid damaging
the video heads.
ꢀ Excessive use of a cleaning cassette is not recommended.
ꢀ Use an optional cleaning cassette for video head cleaning. Periodic check-ups are
recommended.
I The cassette should be stored away from heaters and other heat sources. Avoid storing
cassettes under direct sunlight, and avoid electromagnetic fields.
I The removed Battery Packs should be stored away from heaters and other heat sources.
Do not store the battery pack with metal objects or sharp objects to avoid accidental
damage to the battery pack.
I The memory card should be stored away from heaters and other heat sources. Avoid
storing memory cards under direct sunlight, and avoid electromagnetic fields. Before
removing the memory card from your device, move or copy your data from the memory
card to a PC. Format the memory card periodically.
1. Load the Cleaning Cassette.
2. Set the Power Switch to PLAY mode.
3. Press the
(PLAY/STILL) button to start cleaning.
4. Stop playing after 10 ~ 20 seconds.
Reference
✤ Some cleaning cassette products stop automatically. Refer to the cleaning cassette’s
instructions for detailed information. If the problem continues after the cleaning, consult your
nearest Samsung dealer or Authorised Service Centre.
✤ Do not use wet-type cleaning cassettes.
9
Troubleshooting
Troubleshooting
✤ If your device fails to function as expected, please check the following before contacting
service personnel. Refer to the page numbers listed for further details.
Self Diagnosis Display
Symptom
Possible Causes
Measure
Set focus to AUTO
Use strobe or lit the place
Action
Informs that…
Blinking
Display
Focus does not adjust
automatically
Focus is set to manual mode
Recording was done in a dark place
Lens is covered with condensation
Slow
The battery pack is almost
discharged
Change to a charged one or connect to other power
source
Clear the lens and check the focus
TAPE END!
Slow
When the remaining time on the
tape is less than 2 minutes
Prepare a new cassette
Cassette tape will not load
properly
Cassette is in wrong position
The battery is exhausted
Insert the cassette tape properly, page 47
Charge the battery or use AC adapter
TAPE END!
TAPE!
Change to a new cassette
Insert a tape
No
Cassette has reached its end
No cassette tape is inserted
The tape is Record Protected
The memory card will not load
properly
Memory card is in wrong position
Insert the memory card properly, page 83
Something fills in the memory card slot Clear the memory card slot
Slow
Slow
PROTECTION!
Change to a new cassette or release the tape
record protection
Colour balance of picture is not White balance adjustment is required Set proper white balance, page 121
natural
D,L,C,R
1. Eject the cassette tape.
2. Set to off
Slow
Camcorder has a mechanical fault
Digital zoom does not work
Digital special effect is applied
Turn off the digital special effects. page 57
3. Detach the battery.
Files stored in the memory card Memory card is protected
Remove the protection tab of memory card
Remove the protection on the file, page
135
4. Restart the camcorder
If problem continues, contact your local service
representative.
cannot be deleted
File is protected
Images on the LCD monitor
appear dark
Ambient is too bright
Ambient temperature is too low
Adjust the brightness and angle of LCD
Low temperatures might produce a dark
LCD display
See page 11
Slow
Slow
Slow
Moisture condensation
NO CARD!
Insert a memory card
No memory card is inserted
This is not a malfunction.
CARD FULL!
Change to a new memory card or delete recorded
images
Not enough space for saving
pictures
Rear of the LCD monitor is hot Prolonged use of LCD monitor
Close the LCD monitor to turn if off, or turn
your device off to cool down.
NO IMAGE!
Record a new still image
Slow
There are no images recorded to
play
Play, rewind and fast
forwarding do not work
Power Switch is set to REC
Set the Power Switch to PLAY
FILE ERROR!
Delete the image or format the memory card
Slow
Slow
The image file has an error
Memory card cannot be played Power Switch is set to PLAY Mode
back (Camera mode)
Set the Power Switch to
Mode and set the Mode Dial to
Mode
(CAMERA)
(PLAY)
CARD ERROR!
Format the memory card using the camera menu
Memory card is formatted by other
device or has error in system folder
No picture is taken when
PHOTO is fully pressed
Not enough free memory space is
remained
Delete files from the memory card
✤ If these instructions do not solve your problem, contact your nearest Samsung dealer or
authorised service center/personnel.
Memory card is formatted by different
devices
Format the memory card
Symptom
Possible Causes
Measure
Built-in flash will not pop up or Flash is forced to cancel
Select different flash mode, page 110
Select AUTO, EASYQ, or different MF
distance, page 112
No power is supplied
The power is not connected properly Connect the AC adapter properly, page 27
fire
Focus is set to infinity
AE lock is enabled
Taking the motion clips
Continuous shot option is turned on
Bracket shooting is enabled
Blocking the flash lid
The battery is dead
The battery is too cold
Replace the dead battery pack
Warm up the battery or move to warmer place
Turn off the AE lock
Flash is not available for Motion clips
Turn off the continuous shot
Turn off the AEB, page 125
Clear obstructing object
Viewfinder is on.
Close the viewfinder
LCD monitor is blank
Multi-AV cable is connected
Display option is turned off
Remove the cable
Press the DISPLAY button to bring back OSD
The DATE/TIME is not set
The built-in clock battery has
exhausted.
Set the DATE/TIME, page 38
Replace the Li-ion battery for built-in clock,
page 24
DATE/TIME is wrong
Cannot Record a video
Protection tab is set to “SAVE”
Power Switch is set to PLAY
Power Switch is set to
Cancel the protection, page 48
Set the Power Switch to REC
(CAMERA) Set the Mode Dial to (MOVIE) mode
10
|