Samsung Car Video System B1730NW User Manual

SyncMaster B1630N/B1730NW/B1930N/B1930NW/B2030/B2030N/B2230/B2230N/  
B2230W/B2330/B2430L  
LCD Monitor  
User Manual  
The color and the appearance may differ depending on the  
product, and the specifications are subject to change  
without prior notice to improve the performance.  
(Waste Electrical & Electronic Equipment) - Europe only . . . . . . . . 6-24  
1 Major Safety Precautions  
1-1 Before You Start  
Icons used in this manual  
ICON  
NAME  
MEANING  
Caution  
Indicates cases where the function may not work or the setting may be canceled.  
Note  
Indicates a hint or tip to operate a function.  
Using this Manual  
Make yourself fully aware of the safety precautions before using this product.  
If a problem occurs, refer to the 'Troubleshooting' section.  
Copyright Notice  
The contents of this manual are subject to change without prior notice for performance improvement.  
Copyright © 2009 Samsung Electronics Co., Ltd. All Rights Reserved.  
The copyright of this manual is reserved by Samsung Electronics, Co., Ltd.  
The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written  
permission of Samsung Electronics, Co., Ltd.  
The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics, Co., Ltd.  
Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation.  
VESA, DPM and DDC are the registered trademarks of the Video Electronics Standard Association.  
The ENERGY STAR® logo is the registered trademark of the U.S. Environmental Protection Agency.  
All other trademarks mentioned herein belong to their respective companies.  
1-1  
Major Safety Precautions  
 
1-2 Custody and Maintenance  
External Surface and Screen Maintenance  
Clean the product with a soft dry cloth.  
Do not clean the product with an inflammable substance such  
as benzene or thinner or with a wet cloth. This may result in a  
problem with the product.  
Do not scratch the screen with your fingernails or a sharp  
object.  
This may result in scratches or damage to the product.  
Do not clean the product directly by spraying water onto the  
product.  
If water enters the product, it may result in fire, electric shock or  
a problem with the product.  
A white stain may be generated on the surface of the high-  
glossy model due to the inherent characteristics of the material,  
if a supersonic humidifier is used.  
The appearance and the color may differ depending on the  
model.  
Securing the Installation Space  
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.  
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature.  
Install the product so the required distances shown in the figure are kept.  
The appearance may differ depending on the product.  
When installing the product with a stand  
When installing the product with a wall-mount  
About persistent images  
Displaying a still image for a long time may create a persistent image or stain on the screen. If you do not use the product for  
a long time, set the power-saving mode or screen saver.  
Due to technological constraints of the LCD Panel manufacturer, the images generated by this product may appear either  
brighter or darker than normal by appr. 1ppm (parts per million) pixel.  
The number of sub-pixels of an LCD panel by size: The number of Sub-Pixels = Max. Horizontal Resolution x Max. Vertical  
Resolution x 3  
Example) If the maximum resolution is 1600 x 900, the number of sub-pixels is 1600 x 900 x 3 = 4,320,000.  
Major Safety Precautions  
1-2  
 
1-3 Safety Precautions  
Icons used for safety precautions  
ICON  
NAME  
MEANING  
Failing to follow the precautions marked with this sign, may result in a serious injury or  
even a fatality.  
Warning  
Failing to follow the precautions marked with this sign, may result in a personal injury or  
property damage.  
Caution  
Meaning of Signs  
Do not perform.  
Must be followed.  
The power plug must be unplugged from the  
wall outlet.  
Do not disassemble.  
Do not touch.  
Must be grounded to prevent electric shock.  
Power Related  
The following images are for your reference and may differ depending on models and countries.  
Warning  
Avoid using a damaged power cord or plug  
or a loose power outlet.  
Avoid connecting multiple electric appli-  
ances to a single wall outlet.  
Otherwise, it may result in electric shock  
or fire.  
Otherwise, it may result in fire due to  
overheating of the wall outlet.  
Avoid plugging in or unplugging the power  
supply with wet hands.  
Plug the power plug in firmly.  
Otherwise, it may result in fire.  
Otherwise, it may result in electric  
shock.  
Make sure to connect the power cord to a  
grounded wall outlet (for insulation class 1  
equipment only).  
Avoid bending or twisting the power cord  
excessively and avoid placing heavy objects  
on the cord.  
Otherwise, it may result in electric shock  
or injury.  
Otherwise, it may result in electric shock  
or fire due to a damaged power cord.  
Keep the power cord and the product away  
from a heater.  
If the pins of the power plug or the wall out-  
let are covered in dust, clean it using a dry  
cloth.  
Otherwise, it may result in electric shock  
or fire.  
Otherwise, it may result in fire.  
1-3  
Major Safety Precautions  
 
Caution  
Avoid unplugging the power plug while the  
product is operating.  
Make sure to use only the power cord sup-  
plied by our company. In addition, do not  
use the power cord of another electric appli-  
ance.  
Otherwise, it may damage the product  
due to electric shock.  
Otherwise, it may result in electric shock  
or fire.  
When unplugging the power plug from the  
wall outlet, make sure to hold it by the plug  
and not by the cord.  
Connect the power plug to a wall outlet that  
can be easily reached.  
When a problem occurs with the  
product, you must unplug the power  
plug to cut the power off completely. You  
cannot cut the power off completely  
using only the power button on the  
product.  
Otherwise, it may result in electric shock  
or fire.  
Installation Related  
Warning  
Avoid placing burning candles, mosquito-  
Ask an installation engineer or relevant  
repellent or cigarettes on the product and  
installing the product near a heater.  
company to install the product onto the wall.  
Otherwise, it may result in injury.  
Otherwise, it may result in fire.  
Make sure to use the specified wall  
mount.  
Avoid installing the product in a badly-venti-  
lated location such as inside a bookshelf or  
closet.  
Keep a distance of at least 10 cm from the  
wall when installing the product for ventila-  
tion.  
Otherwise, it may result in fire due to  
internal over-heating.  
Otherwise, it may result in fire due to  
internal over-heating.  
Keep the plastic bags used to pack the  
product away from children.  
Avoid installing the product in a location that  
is unstable or exposed to excessive vibra-  
tions such as on an unstable or slanted  
shelf.  
If children place the plastic bags over  
their heads, they may suffocate.  
The product may fall and this may result  
in damage to the product or injury.  
If you use the product in a location  
exposed to excessive vibrations, it may  
result in a problem with the product or  
fire.  
Major Safety Precautions  
1-3  
Avoid installing the product in a location  
exposed to dust, moisture (sauna), oil,  
smoke or water (rain drops) and installing it  
within a vehicle.  
Avoid installing the product in a location  
exposed to direct sunlight and installing the  
product near a heat source such as a fire or  
heater.  
This may result in electric shock or fire.  
This may shorten the product life cycle  
or cause fire.  
Avoid installing the product at an easily  
reachable height where children may reach  
it.  
If a child touches the product, the  
product may fall and this may result in  
injury.  
Since the front part is heavier, install the  
product on a flat and stable surface.  
Caution  
Do not let the product drop while moving it.  
Do not place the product face down on the  
floor.  
This may result in a problem with the  
product or injury.  
This may damage the panel of the  
product.  
When installing the product on a console or  
shelf, make sure that the front of the product  
does not protrude out of the console or  
shelf.  
When putting the product down, handle it  
gently.  
Otherwise, it may result in a problem  
with the product or injury.  
Otherwise, this may cause the product  
to fall off and result in a malfunction or  
injury.  
Make sure to use a cabinet or shelf  
suitable to the size of the product.  
If the product is installed in a location where  
the operating conditions vary considerably,  
a serious quality problem may occur due to  
the surrounding environment. In this case,  
install the product only after consulting one  
of our service engineers about the matter.  
Places exposed to microscopic dust,  
chemicals, too high or low temperature,  
high humidity, such as airports or  
stations where the product is  
continuously used for a long time and so  
on.  
Cleaning Related  
Since using a surfactant, which contains a large amount of alcohol, solvent or other strong chemicals, may result  
in the discoloration or cracking of the product exterior or the panel surface coming off, be sure to use the recom-  
mended cleansing agent only.  
You can purchase the recommended cleansing agent from a service center.  
1-3  
Major Safety Precautions  
Before cleaning the product, unplug the  
power cord.  
When cleaning the product, do not spray  
water directly over the product parts.  
Otherwise, it may result in electric shock  
or fire.  
Make sure that water does not enter the  
product.  
Otherwise, it may result in fire, electric  
shock or a problem with the product.  
Caution  
Avoid spraying cleansing agent directly onto  
the product.  
When cleaning the product, disconnect the  
power cord and clean the product with a soft  
dry cloth.  
This may result in discoloration or  
cracking of the exterior of the product or  
the panel coming off.  
Avoid using chemicals such as wax,  
benzene, alcohol, thinner, mosquito-  
repellent, fragrance, lubrication or  
cleansing agent when cleaning the  
product.  
This may result in the exterior being  
deformed or the print being removed.  
Use a soft, damp cloth with a "monitor-  
exclusive cleansing agent" and wipe the  
product with it.  
Since the exterior of the product is easily  
scratched, be sure to use a proper cleans-  
ing cloth. Use the cleansing cloth with a  
small amount of water. However, if the cloth  
is contaminated by alien substances, it may  
result in scratches to the exterior; therefore  
shake off any alien substances from the  
cloth before using it.  
If no monitor-exclusive cleansing agent  
is available, dilute a cleansing agent  
with water at a ratio of 1:10 before  
cleaning the product.  
Usage Related  
Warning  
Since a high voltage runs through the prod-  
uct, never disassemble, repair or modify the  
product yourself.  
When cleaning the product, do not spray  
water directly over the product parts.  
Make sure that water does not enter the  
product.  
Otherwise, it may result in fire or electric  
shock.  
Otherwise, it may result in fire, electric  
shock or a problem with the product.  
If the product needs to be fixed, contact  
a service center.  
If the product generates a strange noise, a  
burning smell, or smoke, unplug the power  
plug immediately and contact a service cen-  
ter.  
Avoid letting children to hang or climb onto  
the product.  
Otherwise, it may result in the product  
falling and this may result in injury or  
death.  
Otherwise, it may result in electric shock  
or fire.  
If you drop the product or the case is dam-  
aged, turn the power off and unplug the  
power cord. Contact a service center.  
Avoid placing objects such as toys and  
cookies on top of the product.  
If a child hangs over the product to grab  
an object, the object or the product may  
fall and this may result in injury or even  
death.  
Otherwise, it may result in fire or electric  
shock.  
Major Safety Precautions  
1-3  
When thunder or lighting occurs, unplug the  
power cord and under no circumstance  
touch the antenna cable as this is danger-  
ous.  
Avoid dropping an object over the product  
or cause impact to the product.  
Otherwise, it may result in electric shock  
or fire.  
Otherwise, it may result in electric shock  
or fire.  
Avoid moving the product by pulling the  
power cord or antenna cable.  
When a gas leak occurs, do not touch the  
product or the power plug and ventilate  
immediately.  
Otherwise, it may result in electric  
shock, fire or a problem with the product  
due to damage to the cable.  
A spark may result in an explosion or  
fire.  
During a thunder or lighting storm, do  
not touch the power cord or antenna  
cable.  
Avoid lifting up or move the product by hold-  
ing only the power cord or signal cable.  
Avoid using or placing inflammable spray or  
objects near the product.  
Otherwise, it may result in electric  
shock, fire or a problem with the product  
due to damage to the cable.  
This may result in an explosion or fire.  
Take care not to block the vent by a table  
cloth or curtain.  
Avoid inserting metal objects such as a  
chopsticks, coins or hairpins, or inflamma-  
ble objects into the product (the vents,  
ports, etc).  
Otherwise, it may result in fire due to  
internal overheating.  
If water or an alien substance enters the  
product, turn the power off, unplug the  
power cord and contact a service center.  
Otherwise, it may result in a problem  
with the product, electric shock or fire.  
Avoid placing a liquid container such as a  
vase, flowerpot, beverage, cosmetics or  
drugs, or a metal object over the product.  
If water or an alien substance enters the  
product, turn the power off, unplug the  
power cord and contact a service  
center.  
Otherwise, it may result in a problem  
with the product, electric shock or fire.  
Caution  
Displaying a still image for a long time may  
create a persistent image or stain on the  
screen.  
When not using the product for a long time  
such as leaving your home, unplug the  
power cord from the wall outlet.  
If you do not use the product for a long  
time, use the power-saving mode or set  
the screensaver to the moving picture  
mode.  
Otherwise, it may cause dust  
accumulation and result in fire caused  
by overheating or short circuit or result in  
an electric shock.  
Set the appropriate resolution and fre-  
quency for the product.  
Avoid turning the product upside down or  
move the product holding only the stand.  
Otherwise, it may result in eye strain.  
This may cause the product to fall  
resulting in damage to the product or  
injury.  
1-3  
Major Safety Precautions  
Watching the product from too close a dis-  
tance continuously may damage your eye-  
sight.  
Avoid using a humidifier or cooker near the  
product.  
Otherwise, it may result in electric shock  
or fire.  
It is important to give your eyes some rest (5  
minutes every hour) when viewing the prod-  
uct screen for long periods of time.  
Since the display panel is hot after using it  
for a long time, do not touch the product.  
This will alleviate any eye strain.  
Keep small accessories away from the chil-  
dren.  
Take care when adjusting the angle of the  
product or the height of the stand.  
If your hand or finger is caught, you may  
be injured.  
If the product is tilted excessively, the  
product may fall and this may result in  
injury.  
Avoid placing a heavy object over the prod-  
uct.  
Otherwise, it may result in a problem  
with the product or injury.  
Maintaining the Correct Posture when Using this Product  
Maintain the correct posture when using this product.  
Straighten your back.  
Keep a distance of 45~50 cm from your eyes to the screen. Look down at the screen and  
face the screen forwards.  
Maintain the correct posture when using this product.  
Adjust the angle of the product so that light is not reflected onto the screen.  
Keep your elbow at a right angle and keep your arm level with the back of your hand.  
Keep your elbow at a right angle.  
Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or  
higher and maintain the position of your arm so that your arm is below your heart.  
Major Safety Precautions  
1-3  
2 Installing the Product  
2-1 Package Contents  
Unpack the product and check if all of the following contents have been included.  
Store the packaging box in case you need to move the Product at a later stage.  
Monitor  
CONTENTS  
Installation Manual  
Product Warranty  
User Manual  
D-Sub Cable  
(Not available in all locations)  
(Not available in all locations)  
Power Cord  
Cleaning Cloth  
Stand Connector  
Stand  
OPTIONAL PARTS  
DVI Cable  
The cleaning cloth is supplied with black high-glossy models only.  
2-1  
Installing the Product