Camcorder
User’s Guide
Changing Entertainment. Again.
CC6364/CC6374
Table of Contents
Table of Contents
Chapter 1: Connections & Setup
Parts Checklist ......................................................................................... 6
Buttons and Controls ............................................................................. 7
Getting Started ....................................................................................... 9
Unpack the camcorder and accessories .......................................... 9
Adjust the hand strap .................................................................... 10
Attach the lens cap ........................................................................ 10
Attach the power supply ...............................................................11
Turn on the camcorder................................................................... 12
Set the video light (Off/AUTO/ON) switch to
AUTO (CC6374 only) ...............................................................12
Insert a cassette tape ..................................................................... 13
Use the LCD monitor or viewfinder to see what’s recording ...... 14
Start recording ............................................................................... 15
Play your recording ........................................................................ 15
Turn off the camcorder .................................................................. 16
Powering the Camcorder ..................................................................... 16
Charging the Battery ..................................................................... 16
Refreshing the Battery ................................................................... 18
Battery Level Icon ...........................................................................19
Battery Care and Storage .............................................................. 19
Using the Power Supply ................................................................. 20
Using the Shoulder Strap..................................................................... 21
Setting the Date and Time................................................................... 22
Setting the Tape Recording Speed ...................................................... 23
Setting the Tape Length ....................................................................... 24
(continued on the next page)
1
Table of Contents
Chapter 2: Using the Monitors
Seeing What You Are Recording ......................................................... 26
Using the LCD Monitor .................................................................. 26
Using the Viewfinder ..................................................................... 27
On-screen Icons..................................................................................... 28
Warning Icons................................................................................. 28
Recording and Playback Icons ....................................................... 29
Other Icons ..................................................................................... 33
Chapter 3: Recording
Recording Details.................................................................................. 36
Journalistic Shooting...................................................................... 36
Self-Recording ................................................................................ 37
5-Second Recording ....................................................................... 37
Quick Review .................................................................................. 37
Retake ............................................................................................. 38
Digital and Optical Zooming ......................................................... 38
Using Steady Pix™.......................................................................... 40
Using the Video Light (CC6374 only) ............................................ 40
Recording Tips ...................................................................................... 42
Chapter 4: Playback
Playback Options .................................................................................. 44
Basic Playback ................................................................................. 44
Still Playback Mode ........................................................................ 47
Shuttle Search................................................................................. 48
Choose your Connection ...................................................................... 49
Using the Cassette Tape Adapter .................................................. 49
Connecting to a TV (or VCR) with Audio/Video Input Jacks ........ 52
Playback on a TV (or VCR) with Audio/Video Input Jacks............ 53
Tape Dubbing ................................................................................. 54
2
Table of Contents
Chapter 5: Advanced Features
Using the Menus For Advanced Adjustment...................................... 56
Menu Definitions ..................................................................................57
Camera Menu .................................................................................57
System Menu ..................................................................................57
System Menu (continued) .............................................................. 58
Using the Advanced Features .............................................................. 60
Fade/Wipe Effects ...........................................................................60
Program AE With Special Effects................................................... 62
Digital Effects .................................................................................63
Exposure Control ............................................................................ 64
Focusing .......................................................................................... 65
White Balance Adjustment ............................................................ 67
Date/Time Insert ............................................................................. 69
Instant Titles ................................................................................... 70
Animation .......................................................................................71
Time-Lapse ...................................................................................... 72
Chapter 6: Other Information
Troubleshooting.................................................................................... 74
Final Notes ............................................................................................ 78
Power ..............................................................................................78
Date/Time Settings ......................................................................... 78
Video Recording ............................................................................. 79
TBC (Time Base Corrector) ............................................................. 79
Tapes ...............................................................................................80
Care and Cleaning ................................................................................ 81
After Using the Camcorder............................................................ 81
Cleaning The Camcorder ...............................................................81
Care and Maintenance ......................................................................... 81
Proper Care and Storage ...............................................................82
(continued on the next page)
3
Table of Contents
Tape Care and Storage................................................................... 82
Things to Avoid .............................................................................. 83
Traveling Tips ........................................................................................ 83
Specifications ........................................................................................ 84
Customer Assistance and Service ........................................................ 85
Limited Warranty.................................................................................. 87
FCC and Industry Canada Information ................................................ 91
Optional Accessories ............................................................................ 92
Accessories Order Form.................................................................. 95
Index ...................................................................................................... 98
4
Chapter 1
Connections & Setup
Chapter Overview:
•
•
•
•
•
•
•
•
Parts Checklist
Buttons and Controls
Getting Started
Powering the Camcorder
Using the Shoulder Strap
Setting the Date and Time
Setting the Tape Recording Speed
Setting the Tape Length
Changing Entertainment. Again.
5
Connections & Setup
Parts Checklist
Make sure the box includes the items shown here:
E
T
C
E
J
E
R
F
E
D
R
I
V
H
S
O
E
C S
D
H
C
G R
A
C
E
T
I F I G
D
E
E
.
P
A
F
K
A
T
E
A D
F
E
E
I P / W
E
MENU
ACK
R
R / E R N U T
O
/BR
ING
O
C
/TR
IGH
T
R
M
F
O
T
U
A
P
O
T
S
N O
5
SE
C.
L
R
EC
T
H G
I
VO
L
+
ST
EA
DY
PI
X/
TB
C
+
I
C
A
I
Camcorder
AC power supply
Part # 250814
Battery pack
Part # 244427 (FB1260)
Shoulder strap
Part # ACS091
AA battery for
cassette tape
adapter
Cassette tape adapter
Part # 244270 (CC6374
only)
Lens cap
Part # 251624
Audio/ Video cables
Part # VH83
(CC6364 only)
Caution
Never use the power supply for any purpose other than charging the FB1260 battery
pack or for supplying power to the camcorder.
6
Chapter 1
Connections & Setup
Buttons and Controls
MENU/
5 SEC. REC
button
Power Zoom/ VOL lever
Viewfinder
BRIGHT/
TRACKING
dial
C
O
U
N
T
R
R
/
L
IG
H
T
F
A
D
E
W
I
E
O
F
F
A
U
T
O
P
A
O
E
N
D I G I
F
C
T
S
O
T
P
R
R
E
T
A
K
E
F
L
O
V
C
E
R
.
C
E
S
5
T
H
IG
R
R
/T
/B
U
G
IN
N
E
K
C
M
A
+
STEADY PIX/TBC
+
STEADY PIX™
button
M
A
A
F
O
Y
L P
Audio/Video
jacks
Power
switch
BATTERY
RELEASE
switch
Recording
Start/Stop
button
E
J
E
T
C
R
E
D
O
R
F
V
E
I
H
S
E
D
C S
C
H
R
A
G I
D
G
I
E
T C E F
P
E A .
F
F
E
W
/
E
D A
K
E P I
A
T E
R
MENU/BRIGHT
/TRACKING
R
E T N U O C
R
M
/
R
O
F F
U
A
O
T
O
N
P
O
T
S
5
SEC. REC
L
G
I
H
T
V
O
L
Eyepiece focus
control
+
S
T
EA
D
Y
P
IX
/TB
C
+
Speaker
Video light
(CC6374 only)
Microphone
Hand strap
Chapter 1
7
Connections & Setup
Playback
buttons
CHARGE
indicator
POWER indicator
STOP
R
RETAKE
F
Video
LIGHT
switch
(CC6374
only)
EJECT
switch
COUNTER R/M and
FADE/WIDE button
DIGIFECT
button
P.AE
button
REFRESH button
S
T
O
P
R
R
E
T
A
K
E
F
Shoulder
strap
eyelets
Area marked CLOSE
LCD monitor
Tripod mounting sockets
Camcorder bottom view
8
Chapter 1
Connections & Setup
Getting Started
This section describes the basics on how to set up your camcorder to record for the first
time. Refer to the other sections for detailed operation and feature options.
Unpack the camcorder and accessories
• The items shown are packed with the camcorder. If any pieces are missing or
appear damaged, contact your dealer immediately.
• Remove the plastic film that covers the front and side logos on the camcorder. Use
your fingernail, not anything sharp, to remove.
• Save all packing materials and box in case the camcorder ever needs to be
shipped or stored.
Chapter 1
9
Connections & Setup
Adjust the hand strap
1. Lift the flap on the hand strap and separate the Velcro strip.
2. Insert your hand so your fingers can comfortably reach the buttons.
3. Adjust the strap to fit snugly.
4. Refasten the strap, and fold the flap back down.
C
O
U
N
L
IG
T
E
H
T
F
O
FF
A
R
D
R
E
A
U
/ W
/ M
P
T
O
.
I P
E
O
N
E
D
I G
I F
E
C
T
T
S
P
O
R
R
E
K A T E
F
L
VO
C
RE
C.
SE
5
HT
IG
AC
BR
U/
EN
NG
KI
M
R
/T
+
C
B
/T
IX
P
Y
D
A
E
T
S
+
M
A
F
O
Y
A
L P
Attach the lens cap
To protect the lens, attach the provided lens cap to the camcorder as shown in the
illustration.
C
O
U
N
L
IG
T
E
H
T
F
O
FF
A
R
D
E
R
A
U
W
M
T
O
P
.
P I
E
A
O
N
E
D
G
F
E
C
T
T
S
P
O
R
R
E
K A T E
F
L
VO
C
RE
C.
SE
5
HT
IG
AC
BR
/T
U/
NG
KI
EN
M
R
+
C
B
/T
IX
P
Y
D
A
E
T
S
+
M
A
O
Y
A
L P
10
Chapter 1
Connections & Setup
C
U
R
R
M
L
IG
H
F
O
FF
T
A
E
W
I
E
A
U
P
T
O
.
O
N
D
G
I
C T
T
S
P
O
R
R
E
K A T E
F
VOL
5
SEC. REC
ENU/BRIGHT
M
/TRACKING
+
STEADY PIX/TBC
+
M
A
F
O
Y
2
A
L P
AC power supply
1
DC IN jack
Attach the power supply
Since the battery must be charged before it can be used the first time, you need to use an
AC outlet to power the camcorder.
1. Plug the small end of the power supply into the DC IN jack on the camcorder.
2. Plug the other end of the power supply into a working AC outlet.
Chapter 1
11
Connections & Setup
Turn on the camcorder
C
O
U
N
LIG
HT
T
E
A
D
R
OF
F
E
R
A
UT
W
M
.
P
O
O
N
A
E
E
D
G
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
EC
.
R
5
S
EC
HT
KIN
AC
IG
/BR
G
NU
ME
/TR
Set the Power switch to the desired setting, either
+
BC
/T
IX
Y
P
D
EA
ST
+
A
M
automatic ( ) or manual ( ) record mode, powered
off (OFF), or in playback mode ( ).
M
A
Y
P
The POWER indicator comes on when the
camcorder is turned on.
A
Automatic recording places the camcorder
into AutoShot™ mode. Focus, exposure, iris
control, white balance, and the video light are
controlled by the camcorder during automatic
recording.
M
A
F
Y A
L
P
M
Manual recording mode allows you to
Power switch
control many of the camcorder’s special
features, including accessing the menus and
setting the clock.
Notes:
•
Many special effects don’t operate in
AutoShot mode (see pages 57-59 for
more information).
•
The camcorder automatically turns off to
save battery power if you leave it in
record-standby mode for more than five
minutes. To turn it back on, set the
Power switch to OFF, then back to
automatic or manual record mode.
POWER indicator
Set the video light (OFF/AUTO/ON)
Switch to AUTO (CC6374 only)
STOP
R
RETAKE
F
Slide the video LIGHT switch to AUTO. In this
setting, the video light automatically turns on when
more light is needed.
E
A
DE/WIPE
A
COUNTER R/M
F
P.
DIGIFECT
Video LIGHT
switch (CC6374
only)
12
Chapter 1
Connections & Setup
Insert a cassette tape
1. Make sure the camcorder is connected to a
power supply.
2. Open the LCD monitor fully or adjust the
viewfinder.
STOP
R
RETAKE
F
A
3. With the camcorder set to (automatic
record), slide the EJECT switch until the
cassette tape holder opens. Don’t force the
camcorder open.
IPE
AE
ADE/W
.
COUNTER R/M
F
P
DIGIFECT
4. Insert a tape with the tape wheel facing up and
the tape window facing out.
Notes:
EJECT switch
•
Make sure the tape is not slack when
loading the cassette tape. If there is any
slack, turn the wheel on the cassette
tape in the direction of the arrow to
take up the slack.
•
Make sure the Erase Protection tab is in
the position that allows recording. If
not, slide the tab. Some tapes have
removable tabs. If the tab has been
removed, cover the hole with adhesive
tape.
Tape window
Tape wheel
5. Push on the area marked CLOSE until the
cassette tape holder locks into place. (PAUSE
appears on the LCD or in the viewfinder.)
Notes:
S
T
O
P
R
RET
AK
E
F
•
You can’t open the cassette tape holder
unless a power supply is attached.
•
The cassette tape holder can’t be
opened while the camcorder is in the
record mode.
Area marked
CLOSE
Caution: Closing the LCD monitor while the
cassette tape holder is still open may
damage the LCD monitor.
BATTERY
RELEASE switch
Cassette tape holder
Chapter 1
13
Connections & Setup
MENU dial
Use the LCD monitor or viewfinder
to see what’s recording
STOP
R
RE
TA
KE
F
Using the LCD monitor
1. Remove the lens cap.
2. Open the monitor 90˚ from the camcorder body.
3. Tilt the monitor 180˚ forward or 90˚ down as
required for convenient viewing while
recording.
LCD monitor
4. To adjust the brightness of the LCD monitor,
rotate the MENU dial.
Notes:
•
Adjusting the LCD monitor brightness
does not affect the recorded image on
the tape.
•
When the LCD monitor opens more than
25˚, the viewfinder automatically turns
off. When the LCD monitor is closed, the
viewfinder automatically turns on.
Viewfinder
Eyepiece focus
control
Using the viewfinder
1. Remove the lens cap.
2. Close the monitor.
C
O
U
N
LIGHT
T
E
A
D
R
OFF
A
E
/
W
U
T
O
O
N
.
P
A
E
E
D
G
I
E
C
T
P
O
T
S
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
AC
/BR
G
NU
KIN
ME
/TR
Note: If the monitor is open more than 25˚,
the viewfinder turns off.
+
C
TB
X/
PI
Y
D
EA
ST
+
3. Adjust the viewfinder to a comfortable position.
M
A
A
F
O
Y
L P
4. Turn the eyepiece focus control to adjust the
focus of the viewfinder for your vision.
14
Chapter 1
Connections & Setup
Start recording
C
O
U
N
LI
GH
T
T
E
A
D
R
OF
AU
TO
R
F
E
W
M
.
P
E
A
ON
E
D
G
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
1. Remove the lens cap.
+
C
TB
X/
PI
Y
D
EA
ST
+
A
2. Set the Power switch to (automatic record).
M
A
A
F
O
Y
L P
(The POWER indicator comes on.)
3. Press and release the Recording Start/Stop
button to start recording. (REC appears in the
viewfinder or LCD monitor (but won’t show up
in the recording)).
M
A
F
4. When finished recording, press and release the
Recording Start/Stop button again to stop
recording. The camcorder is now in the record-
pause mode. (PAUSE appears in the viewfinder
or on the LCD monitor.)
Y A
L
P
Power switch
Recording
Start/Stop
button
Play your recording
STOP
R
RETAKE
F
1. Set the Power switch to
indicator comes on.)
. (The POWER
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
2. Press the Rewind button
to reverse the tape
to the beginning. When rewound completely,
the camcorder automatically stops.
Playback buttons on top of
the camcorder include:
3. Press the Play/Pause button
to start
/
playback. View the recording using the LCD
monitor or viewfinder.
Stop ( ),
Rewind (
)
Play/Pause (
Fast Forward ( ).
)
/
4. Press the Stop button when finished playing
the tape.
Notes:
•
Sound will play back if the LCD monitor
is open or closed. To adjust the volume,
use the Zoom Lever (also labeled
VOL - +).
•
More information about using the LCD
monitor and viewfinder can be found on
pages 26-27.
Chapter 1
15
Connections & Setup
Turn off the camcorder
C
O
U
N
LIG
HT
T
E
A
D
R
OF
F
E
R
A
UT
W
M
.
P
O
A
E
ON
E
D
G
E
C
T
S
P
O
T
R
R
E
K A T E
F
L
VO
EC
.
R
EC
S
5
HT
IG
AC
/BR
G
KIN
NU
ME
/TR
1. Set the Power switch to OFF.
+
BC
/T
IX
Y
P
D
EA
ST
+
2. Close the LCD monitor.
M
A
Y
P
Powering the Camcorder
You can power your camcorder with a battery or AC
power.
DC IN
jack
M
A
F
Y A
L
P
Charging the Battery
Power switch
1. Set the Power switch to OFF.
2. Make sure the battery is attached to the
camcorder. Hook the top end of the battery to
the camcorder and push the battery in until it
locks in place.
CHARGE indicator
Important: If the battery pack is attached in
the wrong position, a malfunction may occur.
STOP
R
RETAKE
F
3. Plug the small end of the power supply into the
DC IN jack on the camcorder and the other end
into an AC outlet. (The CHARGE indicator
blinks.)
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
4. When the CHARGE indicator stops blinking but
stays on, charging is finished. Make sure the
Power switch is set to OFF, then unplug the
power supply from the AC outlet and from the
camcorder.
Tip
Important: Before detaching the power
source, make sure the camcorder’s power is
turned off. Failure to do so can result in a
camcorder malfunction.
Before extended use, it is
recommended that you prepare
enough battery packs to cover 3
times the planned shooting time.
16
Chapter 1
Connections & Setup
Notes:
•
•
If a protective cap is on the battery, remove it before use or charging.
When charging a battery for the first time or after a long storage period, the
CHARGE indicator may not come on. Remove the battery and try again.
•
•
Charge the battery in temperatures between 50˚ and 90˚ Fahrenheit (10-35˚
Celsius).
Charging times are based on a fully discharged battery and vary depending on
ambient temperature and battery condition.
Approximate charging time
Battery
Charging Time
approx. 90 min.
FB1260
Approximate recording time (in minutes)
Battery
Viewfinder on
LCD monitor on
FB1260
90, (50*)
80, (45*)
* when the video light is on (CC6374 only)
Note: Recording time is reduced significantly when you use the Zoom or Record-
Standby modes repeatedly or when you use the LCD monitor repeatedly.
Charge marker
Using the Charge Marker
A charge marker is provided on the battery pack to
help you remember whether it has been charged or
not. Two colors are provided (red and black)—you
choose which one means charged and which means
discharged.
Chapter 1
17
Connections & Setup
Removing the Battery
C
O
U
N
L
IG
T
E
H
T
F
O
FF
A
R
D
E
R
A
U
W
M
T
O
P
.
P I
E
A
O
N
E
D
G
F
E
C
T
O
T
S
P
R
Slide the BATTERY RELEASE switch and pull out the
battery pack.
R
E
K A T E
L
VO
C
RE
C.
SE
5
T
GH
RA
RI
/T
/B
NU
G
IN
CK
+
C
B
/T
IX
P
Y
D
TA
E
S
+
M
F
O
Y
Refreshing the Battery
If you charge a battery before it has been fully
discharged, the battery’s capacity may be reduced
over time. We recommend you discharge or “refresh”
your battery before recharging it.
BATTERY
RELEASE switch
1. Follow steps 1-3 in “Charging the Battery” (see
page 16).
2. Press and hold the REFRESH button for 2
seconds. (The REFRESH indicator blinks. When
the battery has been refreshed, charging
automatically starts and the CHARGE indicator
blinks.)
Notes:
CHARGE
indicator
REFRESH
indicator
•
If you store a partially charged battery
for a long period of time, its
performance is reduced.
STOP
R
RETAKE
F
•
•
•
During charging or discharging, the
camcorder can’t be operated.
/M
R
E
T
IP
TER
N
E/W
E
IFEC
U
D
IG
D
.
A
CO
FA
P
Charging and discharging isn’t possible if
the wrong type of battery is used.
If the battery operation time remains
extremely short even after having been
fully charged, the battery is worn out
and needs to be replaced. Please
purchase a new one.
REFRESH button
18
Chapter 1
Connections & Setup
Battery Level Icon
The battery level icon appears in the viewfinder or
LCD monitor and reveals the amount of power left in
the rechargeable battery.
Note: The battery level icon is not recorded on
the tape.
This icon appears when battery is fully charged.
The icon changes to show that you’ve used some of the battery’s
power.
As you use more of the battery’s power, the icon changes again.
This battery icon flashes in the viewfinder or LCD monitor when the
battery power is almost gone. The camcorder turns off automatically
after a few seconds.
Battery Care and Storage
•
After repeated charging and use, battery life gradually decreases. When operation
time is too short to be useful, the battery should be replaced.
•
If the battery pack becomes too hot, remove it from the camcorder and let it cool
down.
•
•
Do not short the battery’s terminals.
Do not attempt to disassemble or modify the battery. There are no user-serviceable
parts inside.
•
•
Use the battery only with specified adapter/chargers and camcorders.
Throwing the battery into a fire or exposing it to excessive heat – over 149˚F (65˚C)
could be hazardous.
ATTENTION: The EPA certified RBRC® Battery Recycling Seal on the nickel-
cadmium (Ni-Cd) battery indicates Thomson Consumer Electronics is
voluntarily participating in an industry program to collect and recycle these
RBRC
batteries at the end of their useful life, when taken out of service in the
United States or Canada. The RBRC® program provides a convenient
alternative to placing used Ni-Cd batteries into the trash or the
municipal waste stream, which may be illegal in your area. Please call
Ni-Cd
1-800-8-BATTERY™ for information on Ni-Cd battery recycling and
disposal bans/restrictions in your area. Thomson Consumer Electronics’
involvement in this program is part of our commitment to preserving our
environment and conserving our natural resources.
Chapter 1
19
Connections & Setup
Using the Power Supply
The power supply attaches to the camcorder and lets you power it directly from standard
household power. The power supply operates on 110-240 volts, 50/60 Hz, so it can be
used virtually anywhere in the world to power the camcorder or recharge the battery.
1. Plug the small end of the power supply into the DC IN jack on the camcorder.
2. Plug the other end of the power supply into a working AC outlet (110-240V, 50/
60Hz).
Caution: Never use this power supply for any purpose other than charging the
FB1260 or supplying power to the camcorder.
DC IN jack
C
U
N
R
R
M
L
IG
H
F
O
FF
T
A
D
/ W I P E
A
U
T
O
P
A
O
N
E
D
G
I
C T
S
P
O
T
R
R
E
K A T E
F
L
VO
EC
.
R
EC
5
S
HT
IG
BR
U/
EN
G
M
KIN
AC
R
/T
+
C
B
/T
IX
P
Y
D
2
E
A
T
S
+
M
A
A
F
O
Y
L P
AC power supply
1
Removing the power supply
1. Make sure the Power switch is set to OFF.
2. Unplug the power supply from the AC outlet.
3. Unplug the small end of the power supply from the DC IN jack on the camcorder.
Important: Before detaching the power source, make sure the camcorder’s power is
turned off. Failure to do so can result in a camcorder malfunction.
Using an Optional Plug Adapter in Foreign Countries
An optional plug adapter might be required in some countries.
1. Plug the power supply’s plug into the AC plug adapter.
2. Plug the AC plug adapter into the AC outlet.
20
Chapter 1
Connections & Setup
Using the Shoulder Strap
The camcorder’s shoulder strap is designed to let you carry the camera from your
shoulder and – when ready– bring the camcorder to shooting position in one quick
movement.
1. Following the illustration, thread the strap through the eyelet.
2. Fold the strap back and thread it through the buckle.
3. Repeat the procedure to attach the other end of the strap to the other eyelet located
under the hand strap. Make sure the strap is not twisted.
Caution: When carrying the camcorder with the shoulder strap, you should close the
LCD monitor and rotate the viewfinder down. This helps prevent possible damage to
the monitor or viewfinder from bumping against your body as you move. Make sure
the shoulder strap is firmly attached before using it to carry the camcorder.
1
2
ST
O
P
R
RET
AKE
F
3
Chapter 1
21
Connections & Setup
C
O
U
N
LI
GH
T
Setting the Date and Time
T
E
A
D
R
OF
AU
TO
R
F
E
W
M
.
P
A
E
ON
E
D
G
I
E
C
T
S
P
O
T
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
+
C
TB
X/
PI
You need to set the date and time before they can
be displayed.
Y
D
EA
ST
+
M
A
A
F
O
Y
L P
Date and time information is recorded onto the tape
at all times, but its display can be turned on or off
during playback (see page 69).
MENU dial
M
1. Set the Power switch to (manual record).
(The POWER indicator comes on.)
M
A
F
2. Press in the MENU dial. (The CAMERA MENU
Y A
L
P
appears.)
Power switch
3. Rotate the MENU dial to highlight TO SYSTEM
MENU. Press in the MENU dial to select it. (The
SYSTEM MENU appears.)
CAMERA MENU
TO SYSTEM MENU
FOCUS
AUTO
EXPOSURE
M. W. B.
AUTO
AUTO
SYSTEM MENU
4. Rotate the MENU dial to highlight NEXT. Press
in the MENU dial to select it. (The second page
of the SYSTEM MENU appears.)
NEXT
REC MODE
D. ZOOM
SP
50
x
5. Rotate the MENU dial to highlight DATE/TIME.
Press in the MENU dial to select it. (The DATE/
TIME menu appears.)
SYSTEM MENU
TO CAMERA MENU
REC T I ME
OFF
I NT . T I ME
TELE MACRO
T I TLE LANG.
DATE / T I ME
DEMO MODE
OFF
OFF
ENGL I SH
6. Rotate the MENU dial to the item you want to
change (year, month, day, and time). Press in
the MENU dial to select it. When the setting
starts blinking, rotate the MENU dial to adjust it.
When the correct setting appears, press in the
MENU dial to select it.
OFF
RETURN
DATE / T I ME
YEAR
MONTH
DAY
2001
JUN
28
7. When finished, rotate the MENU dial to select
:
T I ME
PM
8
20
EXIT. Then press in the MENU dial twice.
Note: To make the date and time appear in
the camcorder’s display or on the TV, see
page 69.
EX I T
Important: A separate internal battery is
used for the time and date. Under normal
conditions, this battery should last for 10
years or more. If you should need to replace
it, see your nearest RCA authorized service
center.
22
Chapter 1
Connections & Setup
C
O
U
N
LIGH
T
E
T
A
D
R
OF
F
Setting the Tape
Recording Speed
E
/
R
A
W
M
UTO
.
P
ON
A
E
E
D
G
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
R
EC
.
5
S
EC
HT
IG
AC
/BR
G
NU
KIN
ME
/TR
+
C
TB
X/
PI
Y
D
EA
ST
+
You need to select the tape recording speed for the
quality of recording you want.
M
A
A
F
O
Y
L P
M
1. Set the Power switch to
(manual record).
(The POWER indicator comes on.)
MENU dial
2. Press the MENU dial in. (The CAMERA MENU
M
appears.)
A
F
Y A
L
P
3. Rotate the MENU dial to highlight TO SYSTEM
MENU. Press in the MENU dial to select it. (The
SYSTEM MENU appears.)
Power switch
4. Rotate the MENU dial to highlight REC MODE.
Press in the MENU dial to select it. (The REC
MODE menu appears.)
POWER indicator
5. Rotate the MENU dial to highlight SP if you want
the best recording quality, or SLP if you want a
lesser-quality recording which provides three
times the recording time as SP. Press in the
MENU dial to select it.
STOP
R
RETAKE
F
IPE
AE
ADE/W
.
COUNTER R/M
F
P
DIGIFECT
6. When finished, press in the MENU dial again to
exit.
Note: If the recording speed is switched
during the recording, the playback picture
will be blurred at the switching point.
Chapter 1
23
Connections & Setup
C
O
Setting the Tape Length
U
N
LIG
HT
T
E
A
D
R
OF
F
E
R
A
UT
W
M
.
P
O
A
E
ON
E
D
G
I
E
C
T
S
P
O
T
R
R
E
K A T E
F
L
VO
EC
.
R
5
S
EC
HT
IG
AC
/BR
G
KIN
NU
ME
/TR
+
You need to select the tape length so that the camera
can alert you how much time you have left on the
tape.
BC
/T
IX
Y
P
D
EA
ST
+
M
A
Y
P
M
1. Set the Power switch to
(manual record). (The
POWER indicator comes on.)
MENU dial
2. Press the MENU dial in. (The CAMERA MENU
appears.)
M
A
F
3. Rotate the MENU dial to highlight TO SYSTEM
MENU. Press in the MENU dial to select it. (The
SYSTEM MENU appears.)
Y A
L
P
Power switch
4. Rotate the MENU dial to highlight TAPE
LENGTH. Press in the MENU dial to select it.
(The TAPE LENGTH menu appears.)
POWER indicator
5. Rotate the MENU dial to highlight the length of
the tape you are using (T20, T30, T35, T40).
(T20=20 minutes, T30=30 minutes, etc. in SP
mode.) Press in the MENU dial to select it.
STOP
R
RETAKE
F
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
6. When finished, press in the MENU dial again to
exit.
Note: The tape remaining time feature is
accurate only if the correct tape length has
been selected.
24
Chapter 1
Chapter 2
Using the Monitors
Chapter Overview:
•
•
Seeing What You Are Recording
On-screen Icons
Changing Entertainment. Again.
25
Using the Monitors
Seeing What You Are Recording
To see what is recording, use either the LCD monitor or the viewfinder monitor. When
the LCD monitor is open more than 25˚, the viewfinder turns off. When you close the
LCD monitor, the viewfinder turns on.
Using the LCD Monitor
The camcorder’s LCD monitor is a miniature color screen that you can use for recording
playback.
1. Open the LCD monitor at least 25˚. The
viewfinder turns off.
2. For convenient viewing, the LCD monitor can
180°
be tilted once it is open 90˚ from the camera
body. Tilt the monitor forward up 180˚ or down
up to 90˚.
• From a high angle (such as over a crowd)—
tilt the monitor down to record.
• From a low angle (such as when kneeling)—
tilt the monitor up to record.
90°
3. Adjust the brightness of the LCD monitor by
turning the bright control (MENU dial). This
doesn’t affect the brightness of the recording
you are making.
• Turn the dial toward + to brighten the image.
• Turn the dial toward – to darken the image.
4. When finished recording, close the monitor and
lock it into place.
Note: Recording outdoors on bright, sunny
days can make the LCD monitor hard to see.
Use the viewfinder instead.
Cautions
Never force the LCD monitor to rotate completely around. This could damage both
the monitor and/or the camcorder.
When carrying the unit with the shoulder strap, close the monitor to prevent possible
damage to it.
26
Chapter 2
Using the Monitors
Viewfinder
Eyepiece focus
control
Using the Viewfinder
The camcorder’s viewfinder is a miniature monitor
that displays in black and white. For convenient
viewing, rotate the viewfinder up or down.
C
O
U
N
LIG
T
E
HT
A
D
R
OFF
E
R
AU
W
M
TO
O
.
P
E
A
E
N
D
G
E
C
T
O
T
S
P
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
+
BC
/T
Note: When the LCD monitor is open more
X
PI
Y
D
EA
ST
+
than 25˚, the viewfinder turns off.
M
A
Y
L P
Eyepiece Focus Control
The eyepiece focus control lets you set the focus of
the viewfinder for your vision. If you wear
eyeglasses, you probably can operate the camcorder
without them.
It is easiest to set the correct focus by focusing on
one of the viewfinder’s on-screen displays. Look
through the viewfinder and adjust the eyepiece focus
control for your vision.
Note: The eyepiece focus control does not
affect the focus of the image captured by the
camcorder.
Cautions
Never force the viewfinder to rotate completely
around. This will damage the viewfinder and/or
the camcorder.
When carrying the camcorder with the shoulder
strap, put the viewfinder down to help prevent
possible damage to it.
Chapter 2
27
Using the Monitors
On-screen Icons
Several displays appear on the LCD monitor or in the viewfinder to aid in the
operation of the camcorder. Although it may look crowded, all of the icons
shown below do not appear on-screen at the same time. Also, not all screen
icons are shown in the illustration. Refer to the icon descriptions that follow.
SP
120M I N
REC SP
T
40
02
–
:
:
TBC
1
2 3 4 5
AT
F I NE 15
PAUSE
+
MWB
5
M I N
1 / 2
BR I GHT
S
– – – – – – – – – –
+
–
CONGRATULAT I ONS
DEC 25. 01 AM 11 45 18
:
:
––––– –––––
+
VOLUME
–
Recording Menu Icons
Playback Menu Icons
Warning Icons
Indicates the amount of power left in the rechargeable battery.
An empty battery icon flashes on screen when the battery’s power is
almost exhausted.
A
Missing Cassette: Appears when the Power switch is set to either or
M
(automatic or manual record) and no cassette tape is in the
camcorder.
Head Cleaning: HEAD CLEANING REQUIRED USE CLEANING
CASSETTE appears if dirt is detected on the recording heads. Use an
optional cleaning cassette to remove dirt.
28
Chapter 2
Using the Monitors
Condensation: CONDENSATION, OPERATION PAUSED PLEASE WAIT
appears if moisture occurs inside the camcorder. When this icon
appears, wait at least one hour before using the camcorder again.
TAPE END
LENS CAP
End of Cassette: Appears when a tape reaches its end during
recording or playback.
Covered Lens: Appears briefly after the power is turned on to either
automatic or manual record mode and the lens cap is still attached.
Safeguard: The error icons (E01-E06) show what type of malfunction
has occurred. If an error icon and warning appear, turn the unit off,
remove the power supply (battery, etc.) and wait a few minutes for the
warnings to clear. If they do, you can resume using the camcorder. If
the warnings remain, consult your nearest RCA authorized service
center.
E01-E06
Recording and Playback Icons
Auto Date, Date, Time, or Date and Time Icons
Indicates the current date and time and is recorded when they are
displayed (see page 69).
DEC 25. 01
AM 11:45:18
Chapter 2
29
Using the Monitors
Special Effect Icons
Appears when you select SEPIA to give your recordings a brown-
tone like old photographs.
SEPIA
Appears when you select SPORTS to record fast-moving action,
such as sporting events.
SPORTS
Appears when you select SD:SHADOW to darken the picture and
reduce glare.
SD:SHADOW
Appears when you select HZ:HAZE to soften the picture and give
it a misty white effect.
HZ: HAZE
TWILIGHT
Appears when you select TWILIGHT to record scenes at twilight,
fireworks, etc.
Appears when you select 1/2000 to record faster-moving action
than the SPORTS mode.
2
S1/2000
Appears when you select NEGA POSI to reverse the colors and
create a negative image.
NEGA POSI
Appears when you select MOSAIC to record scenes in a mosaic
pattern.
MOSAIC
Appears when you select STRETCH to record scenes which are
double the horizontal width of the picture.
STRETCH
Appears when you select B/W MONOTONE to record scenes in
classic black and white.
B/W
MONOTONE
30
Chapter 2
Using the Monitors
Preset Titles
•
The preset title selected in the TITLE menu appears here. It will be recorded on the
tape when it appears.
M. W. B. (Manual White Balance) Icons
The icon for the manual white balance selected in the M.W.B. menu appears here.
Appears when you select
:FINE to record outdoors on a sunny day.
:CLOUD to record outdoors on a cloudy
:HALOGEN to record using halogen or
Appears when you select
day.
Appears when you select
tungsten lighting.
MWB appears when you select MWB to adjust the color temperatures.
MWB
Status Icons
Appears when the camcorder is recording.
REC
PAUSE
Appears during record-standby.
Appears when the camcorder plays a tape.
Appears during play-pause.
Appears during fast forward and flashes during forward search.
Appears during rewind and flashes during reverse search.
Tracking Icons
Appears during automatic tracking.
Appears during manual tracking.
AT
MT
Chapter 2
31
Using the Monitors
Zoom Icon
Appears when you use the zoom lever.
4X
Bright and Volume Icons
Appears when you adjust the brightness of the monitor with the
BRIGHT dial.
BRIGHT
During playback, the VOLUME icon appears when you adjust the
volume of the speaker with the VOL control (also zoom lever).
VOLUME
Exposure Icon
This icon appears when you are adjusting brightness manually using
the EXPOSURE menu.
+03
Fade and Wipe Icons
Press the FADE/WIPE button to display the icon for the fade or wipe you want to select.
Appears when you select black fade.
BK
Appears when you select mosaic fade.
Appears when you select shutter wipe.
Appears when you select slide wipe.
Appears when you select door wipe.
Appears when you select corner wipe.
Appears when you select window wipe.
32
Chapter 2
Using the Monitors
Focus Icons
Appear when you are adjusting focus manually using the FOCUS menu.
The icons also flash when the auto-focus system cannot operate
properly or you can’t adjust the focus any farther.
These icons flash while you adjust manual focus (see page 66).
Animation and Time-Lapse Recording Icons
Appears when you select the interval time for time-lapse recording (
15S, 30S, 1MIN, or 5MIN; 15S=15 seconds, 30S=30 seconds, etc.).
15S
1S
Appears when you select the recording time for animation or time-
lapse recording (
1/4S, 1/2S, 1S, or 5S; 1/4S=1/4 of a second, 1/2S=
1/2 of a second, etc.) (see pages 71-72).
Other Icons
Steady Pix Icon
Appears when you are using Steady Pix (see page 40).
Tape Length Icon
Indicates what tape length you have selected (T20, T30, T35, or T40;
T20=20 minutes, T30=30 minutes, etc.) (see page 24).
T20
Tape Speed Icon
Indicates what tape speed you have selected (SP/SLP) (see page 23).
SP
Chapter 2
33
Using the Monitors
TBC (Time Base Corrector) Icon
Appears when the time base corrector is turned on (see page 46).
TBC
Time Counter Icon
Appears during playback. It is not recorded. An M appears in front of
the time counter when memory-stop is on (see page 47).
M0:00:00
Time-Remaining Icon
Indicates the approximate time remaining on the tape.
120MIN
34
Chapter 2
Chapter 3
Recording
Chapter Overview:
•
•
Recording Details
Recording Tips
Changing Entertainment. Again.
35
Recording
C
O
U
N
LIG
HT
Recording Details
T
E
A
D
R
OF
F
E
R
A
UT
W
M
.
P
O
O
N
A
E
E
D
G
I
E
C
T
S
P
O
T
R
R
E
K A T E
F
L
VO
EC
.
R
5
S
EC
HT
KIN
AC
IG
/BR
G
NU
ME
/TR
+
BC
/T
IX
Y
P
1. Remove the lens cap.
D
EA
ST
+
A
M
2. Set the Power switch to or
(automatic
M
A
Y
P
record or manual record mode). (The POWER
indicator comes on.)
3. Open the LCD monitor or adjust the viewfinder.
4. Press and release the Recording Start/Stop
button to start recording. (REC appears in the
viewfinder or LCD monitor (but won’t be
recorded.))
M
A
F
Y A
L
P
5. When finished recording, press and release the
Recording Start/Stop button again to stop
recording. The camcorder is now in the record-
pause mode. (PAUSE appears in the viewfinder
or on the LCD monitor.)
Recording Start/
Stop button
Power switch
POWER indicator
Notes:
•
•
•
If the Record-Standby mode continues
for 5 minutes without performing Zoom
or any other operations, the camcorder’s
power shuts off automatically. Set the
STOP
R
RETAKE
F
IPE
A
AE
Power switch to OFF, and then back to
ADE/W
.
COUNTER R/M
F
P
DIGIFECT
M
or
to turn the camcorder on again.
If you are recording on a tape from the
middle (such as when a tape is removed
and reinserted during recording), use the
Retake function (see page 38) to find the
end of the last recording so you do not
erase any of it.
To remove the icons from the
camcorder’s display during recording, see
page 58.
Journalistic Shooting
In some situations, different shooting angles may
provide more dramatic results. Hold the camcorder
in the desired position and tilt the LCD monitor in
the most convenient direction. It can rotate 270° (90°
downward, 180° upward).
36
Chapter 3
Recording
Self-Recording
You can shoot yourself while viewing your own
image in the LCD monitor. Open the LCD monitor
and tilt it upward 180° so that it faces forward, then
point the lens toward yourself and start recording.
5 SEC. REC button
5-Second Recording
You can record a scene for 5 seconds, providing
quick scene transitions like those seen in TV
programs.
C
O
U
N
LI
GH
T
T
E
A
D
R
OFF
E
R
AU
TO
W
M
.
P
E
A
ON
E
D
G
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
EC
R
5
S
EC.
HT
KIN
AC
IG
/BR
/TR
G
NU
ME
+
BC
/T
IX
Y
P
D
EA
ST
+
1. Make sure the camcorder is in the Record–
Standby mode and that the recording mode is
set to SP.
M
A
Y
P
2. Press and release 5 SEC. REC.
5S appears.
3. Press the Recording Start/Stop button to start
recording. Recording starts, and after 5 seconds,
the camcorder returns to Record-Standby mode
automatically.
M
A
F
Y A
L
P
To cancel 5 Sec. Recording, press and release 5 SEC
REC again.
Recording Start/
Stop button
Note: Fade/Wipe cannot be activated by pressing 5
SEC. REC.
Quick Review
STOP
R
RETAKE
F
You can check the end of the last recording.
IPE
1. Make sure the camcorder is in the Record–
Standby mode.
AE
ADE/W
.
COUNTER R/M
F
P
DIGIFECT
2. Press
and release quickly. (The tape is
rewound for approximately 2 seconds and
played back automatically, then pauses in
Record–Standby mode for the next shot.)
Rewind and playback
buttons
Note: Distortion may occur at the start of
playback. This is normal.
Chapter 3
37
Recording
Retake
STOP
R
RETAKE
F
You can also rerecord certain segments.
1. Make sure the camcorder is in the Record–
Standby mode.
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
2. Press and hold either RETAKE button to reach
the start point for new recording. Pressing
RETAKE and playback
buttons
forwards the tape and pressing
reverses it.
3. Press the Recording Start/Stop button to start
recording.
Note: Noise bars appear and pictures may
become monochrome or darken during
Retake. This is normal.
Digital and Optical Zooming
C
O
U
N
LIGH
T
E
T
A
D
R
O
F
F
A
U
E
R
W
M
TO
O
.
P
E
A
E
N
D
G
E
C
T
O
T
S
P
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
AC
/BR
G
NU
KIN
ME
/TR
You can zoom in and out for close-up or wide-angle
shots by moving the zoom lever on the camcorder.
The camcorder automatically focuses at most
distances when zooming. Optical zooming is
possible up to 16 times, and digital zooming allows
up to 400 times normal magnification.
+
C
TB
X/
PI
Y
D
EA
ST
+
M
A
A
F
O
Y
L P
Using the Zoom Lever (W and T)
Zoom lever
To zoom in tight (telephoto) or out wide (wide
angle), rotate the zoom lever to either T or W.
With telephoto zooming it is possible to capture
images to a maximum of 400 times normal
magnification. To do this, the camcorder uses
technology to artificially enhance the image.
Tip
The further you rotate the zoom
lever, the quicker the zoom action.
Optical zoom is the natural, non-enhanced
magnification that the camcorder’s lens will support.
This camcorder has an optical zoom of 16 times
(16X).
When using the zoom lever, an icon appears on
screen to display the approximate zoom ratio.
38
Chapter 3
Recording
Notes:
•
While zooming, focusing may become
unstable. If so, set the zoom while in
record-standby mode and adjust the
image using manual focus (see page 66).
Once the focus is set, zoom the
camcorder in or out while recording.
•
•
The zoom level icon moves during zoom.
Once it reaches the top of the zoom icon
bar, all magnification from that point is
through digital processing.
During digital zoom, the quality of
image may suffer.
Using Digital Zoom
You can use digital zoom to magnify images to a
maximum of 400 times normal magnification.
MENU
dial
C
O
U
N
LIG
HT
T
E
A
D
R
OF
F
E
R
A
UT
W
M
.
P
O
O
N
A
E
E
D
G
I
E
C
T
S
P
O
T
R
R
E
K A T E
M
1. Set the Power switch to
(manual record).
F
L
VO
.
R
EC
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
+
(The POWER indicator comes on.)
C
TB
X/
PI
Y
D
EA
ST
+
2. Press in the MENU dial. (The CAMERA MENU
M
A
Y
L P
appears.)
3. While TO SYSTEM MENU is highlighted, press in
the MENU dial again. (The SYSTEM MENU
appears.)
M
4. Rotate the MENU dial to highlight D. ZOOM.
Press in the MENU dial to select it. (The D.
ZOOM menu appears.)
A
F
Y A
L
P
5. Rotate the MENU dial to highlight the desired
setting. Press in the MENU dial to select it.
Power switch
6. Press in the MENU dial again to exit.
Chapter 3
39
Recording
MENU
dial
STEADY PIX
button
Using Steady Pix™
Digital Image Stabilization is used to compensate for
unstable images cause by camera shake, especially at
high magnifications.
C
O
U
N
LIG
HT
T
E
A
D
R
OF
F
E
R
A
UT
W
M
.
P
E
O
A
ON
E
D
G
E
C
T
S
P
O
T
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
+
C
TB
X/
PI
Y
D
EA
ST
+
To turn on image stabilization, press the STEADY PIX
button. (
appears.)
M
A
Y
L P
To turn off image stabilization, press STEADY PIX
again. (The icon disappears.)
Notes:
Accurate stabilization may not be possible if
hand shake is excessive, or when recording
the following:
M
A
F
Y A
L
•
subjects with vertical or horizontal
stripes.
P
•
•
•
dark or dim subjects.
Power switch
subjects with excessive backlighting.
scenes with movement in various
directions.
•
scenes with low-contrast backgrounds.
Switch off stabilization when the camcorder is
mounted to a tripod.
The
icon blinks or disappears if image
stabilization can’t be used.
Using the Video Light (CC6374 only)
E
T
C
E
J
R
R
F
E
I
V
H
S
E
O
E
D
D
C S
G R
C
A
H
D
E
C T I F E I G
.
P
A E
F
E
K
I P E
D A E F / W
A
T
E
R
MENU/BRIGHT
/TRACKING
R
/ M R T E R U N C O
O
U
A
O
T
P
O
T
S
N O
5
S
E
C
.
R
E
C
L
H G
I
T
VO
L
To brighten the scene when natural lighting is too
dim, the camcorder uses a built-in video light.
+
ST
EA
D
Y
PI
X/
TB
C
+
L
I
/
You can turn on the video light at all times, set to
turn on automatically when the camcorder senses
additional light is needed, or turn off altogether.
Set the LIGHT switch as desired:
OFF
Turns off the light.
Video light
AUTO
Automatically allows the camcorder to
turn on the light when there is
insufficient lighting on the subject.
ON
Keeps the light on at all times as long
as the camcorder is turned on.
40
Chapter 3
Recording
Video Light Details
STOP
R
RETAKE
F
Even if the battery icon (
) doesn’t blink due to
low battery charge, the camcorder may turn off
automatically when you turn on the video light, or if
the video light is turned on when you start a
recording.
IPE
AE
ADE/W
.
COUNTER R/M
F
P
DIGIFECT
When LIGHT OFF/AUTO/ON switch is set to AUTO:
Video LIGHT switch
(CC6374 only)
•
The video light may keep turning on and off
depending on the lighting conditions. If this
happens, manually switch the light ON or OFF
using the LIGHT OFF/AUTO/ON switch.
•
•
If the Sports or High Speed Shutter mode is
turned on, the video light is likely to stay on.
While in Twilight mode, the light won’t activate.
Notes:
•
The video light can only be used when
the camcorder is on.
•
Set the white balance to artificial light
(
) when using the video light to avoid
a “washed-out” look.
•
When not using the video light, turn it
off to save battery power.
Cautions
•
Never operate the video light closer than 1 foot to people or other
objects.
•
The video light becomes very hot. Do not touch it during use or right
after use. Serious injury may result.
•
•
•
Do not place the camcorder in a carrying case right after using the light.
Never operate the video light close to flammable or explosive material.
Consult your nearest RCA authorized service center to replace the video
light.
•
The video light and bulb need to cool for approximately 30 minutes
after use before the bulb assembly is replaced.
Chapter 3
41
Recording
Recording Tips
•
•
•
•
To improve picture quality and color reproduction, try to make sure indoor scenes
are well-lit.
Don’t move the camcorder rapidly from side-to-side while recording. A steady,
gradual “pan” avoids blurring and “jitter”.
Use the viewfinder or LCD monitor to make sure the camcorder is level while
recording so that your scene isn’t “tilted.”
Do not bump or tap the camcorder’s microphone while recording as this sound will
be recorded.
•
•
•
•
Include close-ups of individuals when taping family outings or group functions.
Fading in and out of scenes makes your videos appear more professional.
Learn to use the special effects to add variety to your recordings.
Be aware of video and audio backgrounds. Background details barely noticed while
recording may show up as visual “clutter” on your recording. Background noises
(especially TV sets, radios, household appliances, traffic sounds, etc.) might detract
from the sound you want to record.
•
Avoid long “still” shots of landmarks and scenic attractions. Recordings are more
interesting if they include people and details. “Local color” gives travel videos lasting
appeal. To add interest, consider recording a familiar or landmark scene from an
unfamiliar vantage point.
42
Chapter 3
Chapter 4
Playback
Chapter Overview:
•
•
Playback Options
Choose Your Connection
Changing Entertainment. Again.
43
Playback
C
O
U
N
LI
GH
T
Playback Options
T
E
A
D
R
OF
AU
TO
R
F
E
W
M
.
P
A
E
ON
E
D
G
I
E
C
T
S
P
O
T
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
+
C
TB
X/
PI
The camcorder’s playback features include displaying
still images and high-speed shuttle search. In this
section, you’ll also learn how to connect your
camcorder to a TV, VCR, or computer.
Y
D
EA
ST
+
M
A
A
F
O
Y
L P
Playback features (Play, Pause, Forward, Reverse,
Stop) can be handled using the camcorder’s buttons.
M
A
F
Y A
L
P
Power switch
POWER indicator
Basic Playback
1. Insert a tape.
STOP
R
RETAKE
F
2. Set the Power switch to
(playback mode).
(The POWER indicator comes on.)
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
3. Press
(Play-Pause button) to start playback.
•
•
To stop playback, press (Stop button).
Press
(Rewind button) to reverse playback
(Fast Forward button) to
direction, or the
Playback buttons
advance the tape while in stop mode.
Notes:
•
If stop mode continues for 5 minutes
when power is supplied from a battery,
the camcorder shuts off automatically to
conserve power. To turn the camcorder
on again, set the Power switch to OFF,
then to back to
(playback mode).
•
When the Power switch is set to
and the LCD monitor is opened at an
angle of 25˚ or more, the LCD monitor
switches on and the viewfinder switches
off automatically to save power.
44
Chapter 4
Playback
•
•
If a blank portion on the tape is played
back, the screen may become black. This
is not a malfunction.
LCD monitor/viewfinder indications:
• When power is supplied from a
Tips
battery
appears. When power is
supplied through the power supply,
does not appear.
The playback picture can be viewed
in the viewfinder (with the LCD
monitor shut), on the LCD monitor,
or on a connected TV (see page 52).
• When a tape is stopped, no icons
appear.
You can also view the playback
picture on the LCD monitor with it
flipped over and retracted.
BRIGHT dial VOL lever
Adjusting the LCD Monitor Brightness
Rotate the BRIGHT dial towards + to brighten, or -
to darken.
C
O
U
N
LI
GH
T
T
E
A
D
R
OF
AU
TO
F
E
R
W
M
.
P
E
A
ON
E
D
G
I
E
C
T
S
P
O
T
R
R
E
K A T E
F
L
VO
EC
.
R
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
+
C
TB
X/
PI
Y
D
EA
ST
+
Controlling Speaker Volume
Slide the Zoom Lever (VOL.-+) towards + to turn up
the volume, or towards – to turn down the volume.
M
A
A
F
O
Y
L P
Chapter 4
45
Playback
TRACKING dial
Adjusting the Tracking
You may need to eliminate noise bars that appear
on-screen during playback. The default setting is
Auto Tracking.
C
O
U
N
LIG
HT
T
E
A
D
R
OFF
E
R
AUTO
O
W
M
.
P
E
A
E
N
D
G
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
R
EC
.
5
S
EC
HT
IG
AC
/BR
/TR
G
NU
KIN
ME
+
C
TB
X/
PI
Y
D
EA
ST
+
1) Press in the TRACKING dial for approximately 2
M
A L
A
F
O
Y
seconds. (MT appears).
P
2) Rotate the TRACKING dial until the noise bars
disappear.
•
To return to Auto Tracking, press in the
TRACKING dial for approximately 2 seconds or
set the Power switch to OFF and then to
again. AT blinks. (When Auto Tracking finishes,
the icon disappears.)
TBC button
M
A
F
Y A
L
P
•
•
When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and
AT appears
Power switch
Manual Tracking may not work with tapes that
were recorded on other VCRs or camcorders.
Using TBC (Time Base Corrector)
You may need to remove jitter from fluctuating video
signals to deliver a stable picture even with old
tapes. The default setting is for TBC to be activated.
To activate the TBC mode, press the TBC button
during playback for more than 1 second. (TBC
appears.)
To deactivate TBC, press the TBC button during
playback for more than 1 second. (TBC disappears.)
46
Chapter 4
Playback
Using Counter Memory
STOP
R
RETAKE
F
Counter Memory makes it easier to locate a specific
tape segment.
IPE
AE
ADE/W
.
COUNTER R/M
F
P
DIGIFECT
1. Press and hold the COUNTER R/M button for
more than 1 second. (The counter resets to
0:00:00.)
2. Press COUNTER R/M for less than 1 second. (M
COUNTER R/M
button
Playback buttons
appears.)
3. After recording or playback, press , then
.
(The tape automatically stops at or near 0:00:00.)
4. Press to start playback.
•
The counter memory functions both in the Fast-
Forward and Rewind modes.
•
To disable the Counter Memory Function, press
COUNTER R/M for less than 1 second until M
disappears.
Still Playback Mode
Still playback pauses the tape, freezing a
single frame.
1. Press the Play/Pause button ( ) during playback
to freeze the image.
2. To resume normal playback, press the Play/
Pause button again.
• Video “noise” appears on the screen and the
picture may become monochrome during still
playback. This is normal.
• If pause continues for more than a few
minutes, the camcorder may turn off.
• After approximately 5 minutes in stop mode,
the power turns off automatically.
Chapter 4
47
Playback
STOP
R
RETAKE
F
Shuttle Search
Shuttle search allows high-speed searching in either
forward or reverse directions.
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
1. Press
or
during playback.
2. To resume normal playback, press
• During playback, press and hold
.
or
.
Playback buttons
The search continues as long as you hold
down the button. Once released, normal
playback resumes.
• A slight mosaic effect appears on screen
during shuttle search. This is normal.
• Video “noise” appears on the screen and the
picture may become monochrome during
shuttle search. This is normal.
48
Chapter 4
Playback
Choose your Connection
This manual includes information for some basic types of connections. You may also
need to refer your TV and VCR user’s guides for specific instructions.
Cassette tape
adapter
Using the Cassette Tape Adapter
Before choosing a connection, you may find it easier
to use the cassette tape adapter (supplied with
CC6374 only).
The camcorder uses a smaller size tape, but records
in standard VHS format. The cassette tape adapter
allows you to play your VHS-C tapes in a VCR just
like other standard VHS tapes.
Insert the VHS-C tape into the cassette tape adapter.
Insert the adapter into the VHS VCR like a normal
VHS tape.
Battery compartment cover
1. Remove battery compartment cover.
2. Install supplied “AA” battery so positive (+) and
negative (–) ends align properly with (+) and (–)
terminals in battery compartment.
3. Replace battery compartment cover.
Notes:
•
Replace the battery when the load time
becomes much longer than normal.
•
Remove the battery from the cassette
tape adapter if it is not used for a month
or more. This prevents possible damage
from battery leakage. If leakage occurs,
wipe up the liquid inside the
compartment and replace the battery
with a new one.
Chapter 4
49
Playback
VHS-C tape
Inserting the Tape into the Cassette Tape
Adapter
1. Before inserting the tape into the adapter,
remove any slack in the tape by turning the tape
wheel on the side of the tape.
2. Slide EJECT to the right to open the tape
compartment lid.
Tape window
3. Insert the tape with the tape window on the left
and facing up.
Tape wheel
Allow the tape to drop into the adapter. Do not
force the tape.
Cassette tape
adapter
4. Gently close the tape compartment lid until it
locks into place. Make sure the tape reel area
under the adapter is free to turn while the tape
is loading.
Note: You should hear a whirring sound
while the tape loads.
EJECT switch
50
Chapter 4
Playback
Removing the Tape from the Cassette
Tape Adapter
1. Slide the adapter’s EJECT switch to the right. The
load detector extends from the side and the
whirring sound indicates the tape is being
released before the adapter’s tape compartment
lid opens.
2. Use the access hole on the bottom of the
adapter to push the tape up and remove it from
the adapter.
EJECT switch
3. Gently close the adapter’s tape compartment lid.
Caution: If the load detector is still extending
from the side of the cassette tape adapter after
you’ve attempted to load the tape, loading is not
complete. Try to load the tape again. Attempting
to insert the cassette tape adapter into a VCR with
the load detector extended may cause damage to
the adapter and/or VCR.
Caution: Do not touch the reels during loading
and unloading. It could cause injury or damage
the cassette tape adapter or tape.
Notes:
•
During special-effect playback (still
frame, etc.), the picture may vibrate or
noise bars may appear on the screen.
•
To record on a VCR using a compact tape
and the adapter, cover the adapter’s
recording safety hole with adhesive tape.
Chapter 4
51
Playback
TV or VCR
C
O
U
N
LI
GH
OF
T
A
D
R
R
F
/
M
AU
TO
ON
P
A
E
D
I
F
C
T
P
O
T
S
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
T
IGH
/BR
G
NU
ME
KIN
AC
/TR
+
C
TB
X/
PI
DY
EA
ST
+
M
A
A
F
O
Y
L P
1
2
3
4
Connecting to a TV (or VCR) with Audio/Video Input Jacks
To connect your camcorder to a TV monitor (or VCR) with audio/video inputs, you need
an optional audio/video cable, such as VH83 (supplied with CC6364) (see page 93). If
your TV is already connected to a VCR, attach the camcorder to the VCR and watch what
the camcorder is recording or playing on the TV.
1. Attach the white plug on one end of the audio/video cable to the AUDIO IN jack on
the TV (or VCR).
2. Attach the yellow plug to the VIDEO IN jack on the TV (or VCR).
3. Attach the white plug on the other end of the audio/video cable to the
A (audio) jack (located under the small cover) on the side of the camcorder.
4. Attach the yellow plug to the yellow V (video) jack on the camcorder.
Notes:
•
If your TV (or VCR) has stereo AUDIO IN jacks, you need a Y-adapter to hear
both channels.
52
Chapter 4
Playback
Playback on a TV (or VCR) with
C
O
U
N
LI
GH
T
T
E
A
D
R
OF
AU
TO
R
F
E
W
M
.
P
E
A
ON
E
D
G
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
/BR
NU
G
ME
KIN
AC
/TR
Audio/Video Input Jacks
+
C
TB
X/
PI
Y
D
EA
ST
+
1. Turn on the TV and tune it to the video input
channel or turn on VCR and place it in the “line”
or “camera mode”. (If your VCR does not have a
“line” or “camera mode”, consult the VCR
owner’s manual.) Operate the TV as you
normally do to see the signal coming from the
VCR.
M
A
A
F
O
Y
L P
M
A
F
2. Set the Power switch to playback
POWER indicator comes on.)
mode. (The
Y A
L
P
3. Press
•
.
Power switch
During playback, use the playback features
(see page 44).
4. Press STOP when you are finished.
POWER indicator
Notes:
STOP
R
RETAKE
F
•
It is recommended to use the power
supply instead of the battery pack for
power to achieve uniform playback.
IPE
AE
ADE/W
.
COUNTER R/M
F
P
DIGIFECT
•
Adjust the TV sound volume to its
minimum level to avoid a sudden burst
of sound when the camcorder is turned
on.
•
•
If you have a TV or speakers that are not
specially shielded, do not place the
speakers next to the TV as interference
will occur in the camcorder playback
picture.
Playback buttons
To view the picture and sound from the
camcorder without recording, set the
A
M
camcorder’s Power switch to or
,
then set your TV to the appropriate
input mode.
Chapter 4
53
Playback
Tape Dubbing
C
O
U
N
LIG
HT
T
E
A
D
R
OF
F
AU
TO
E
R
W
M
.
P
O
N
A
E
E
D
G
E
C
T
O
T
S
P
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
KIN
AC
IG
/BR
G
NU
ME
/TR
1. Following the illustration in this chapter,
connect the camcorder and the VCR.
+
BC
/T
IX
Y
P
D
EA
ST
+
M
A
Y
P
2. Set the camcorder’s Power switch to
, turn
on the VCR’s power, and insert the appropriate
tapes in the camcorder and the VCR.
3. Make sure the VCR is in the appropriate AUX
mode and the Record-Pause mode.
M
A
F
4. Use the camcorder’s Play mode to find a spot
just before the edit-in point. Once it is reached,
Y A
L
P
press
on the camcorder.
Power switch
5. When you’re ready to start recording, press
on the camcorder and press the appropriate
record button on the VCR.
STOP
R
RETAKE
F
6. When you want to stop recording, press the
VCR’s pause button and press
camcorder.
on the
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
7. Repeat steps 4 through 6 for additional editing,
then stop the VCR and camcorder when
finished.
Playback buttons
54
Chapter 4
Chapter 5
Advanced Features
Chapter Overview:
•
•
•
Using the Menus for Advanced Adjustment
Menu Definitions
Using the Advanced Features
Changing Entertainment. Again.
55
Advanced Features
C
O
U
N
LI
GH
T
Using the Menus For
Advanced Adjustment
T
E
A
D
R
OF
AU
TO
R
F
E
W
M
.
P
A
E
ON
E
D
G
I
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
+
C
TB
X/
PI
Y
D
EA
ST
+
This camcorder is equipped with an on-screen menu
system that simplifies many of the more detailed
camcorder settings.
M
A
A
F
O
Y
L P
M
1. Set the Power switch to manual record ( ).
MENU
dial
(The POWER indicator comes on.)
M
A
F
2. Press in the MENU dial. The CAMERA MENU
Y A
L
P
appears.
3. Rotate the MENU dial to highlight the desired
function.
Power switch
•
•
To go from the CAMERA MENU to the
SYSTEM MENU, rotate the MENU dial to
highlight TO SYSTEM MENU. Press in the
MENU dial to select it. The SYSTEM MENU is
composed of 2 pages. To go to the next
page, rotate the MENU dial to highlight
NEXT. Press in the MENU dial to select it.
POWER
indicator
STOP
R
RETAKE
F
To return to the CAMERA MENU from page
2 of the SYSTEM MENU, rotate the MENU
dial to highlight TO CAMERA MENU. Press
in the MENU dial to select it.
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
4. Press in the MENU dial to display the menu for
the function you have selected and rotate it to
select the desired setting.
5. Press in the MENU dial. The CAMERA MENU or
the SYSTEM MENU reappears with RETURN
highlighted.
6. Press in the MENU dial to exit.
56
Chapter 5
Advanced Features
Menu Definitions
The following charts will help you get acquainted with the various menus and some brief
definitions of their features. For more detailed explanation, refer to the corresponding
sections.
Camera Menu
FOCUS
Refer to Focusing (see page 65).
EXPOSURE
M.W.B.
Refer to Exposure Control (see page 64).
Refer to White Balance Adjustment and Manual White Balance
Operation (see pages 67-68).
TITLE
Allows you to superimpose one of eight preset titles (see page 70).
DATE/TIME DISP.
Makes the date/time settings appear in the camcorder or on a
connected monitor (see page 69).
System Menu
This menu can’t be accessed while recording.
REC MODE
D. ZOOM
Allows you to set the recording mode (SP or SLP) (see
page 23).
50X
Factory Preset: Allows you to use the Digital Zoom. By
digitally processing and magnifying images, zooming is
possible from 16X (the optical zoom limit), to a
maximum of 50X digital magnification.
400X Allows you to use the Digital Zoom. By digitally
processing and magnifying images, zooming is possible
from 16X (the optical zoom limit), to a maximum of
400X digital magnification.
OFF
Digital Zoom isn’t available. Only optical zoom
(maximum 16x magnification) can function. When set to
OFF during Digital Zoom, zoom magnification changes
to 16X.
Chapter 5
57
Advanced Features
System Menu (continued)
Factory Preset: Doesn’t display black bars.
16 x 9
OFF
ON
Allows you to record black bars at the top and bottom of
the screen to produce a cinema-like wide-screen effect.
Allows you to set the tape length depending on the tape
used (see page 24).
TAPE LENGTH
DISPLAY
Factory Preset: Make all of the icons appear on the LCD
monitor/viewfinder during playback or recording.
FULL
Make the following icons disappear from the LCD monitor/
viewfinder during recording or playback: cassette warning,
tape remaining time, battery pack remaining power icon
and tape length icon.
SIMPLE
Refer to Animation and Time-Lapse (see pages 71-72).
REC TIME
Refer to Time-Lapse (see page 72).
INT. TIME
Factory preset (OFF) : Usually the distance to a subject
where the lens is in focus depends on the zoom
magnification. Unless there is a distance of more than 1 m
(3.23 ft) to the subject, the lens is out of focus at the
maximum telephoto setting. When set to ON, you can
shoot a subject as large as possible at a distance of
approximately 60 cm (23-5/8¨).
TELE MACRO
OFF
ON
Depending on the zoom position, the lens may go out of
focus.
58
Chapter 5
Advanced Features
Allows you to select the language (ENGLISH, FRENCH, or
TITLE LANG
SPANISH) of Instant Titles (see page 70).
Allows you to set the current date and time (see page 22).
DATE/TIME
Factory Preset: Demonstrates certain functions automatically.
When DEMO MODE is set to ON and you have exited all
menus, the demonstration starts.
DEMO MODE
ON
Operating the Power zoom lever during the demonstration
stops the demonstration temporarily. If the Power zoom
lever is not moved for more than 1 minute after that, the
demonstration will resume.
M
To cancel the demo mode, rotate the Power switch to
(manual record) and press in the MENU dial while the demo
is in progress. This takes you directly to the DEMO MODE
menu (so you will not have to go through the main menu).
Rotate the MENU dial to highlight OFF. Then press in the
MENU dial again to select it.
Note: When a tape is loaded in the camcorder, the
demonstration is not available.
OFF
Automatic demonstration will not take place.
Chapter 5
59
Advanced Features
Using the Advanced Features
C
O
U
N
LI
GH
T
T
E
A
D
R
OF
F
A
UT
E
R
W
M
.
P
O
A
E
ON
E
D
G
I
E
C
T
S
P
O
T
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
+
C
TB
X/
PI
Y
D
EA
ST
+
Fade/Wipe Effects
M
A
Y
L P
These effects let you make professional-looking
scene transitions. Fade-ins or wipe-ins work at
recording start, and fade-outs or wipe-outs work at
recording end.
MENU
dial
M
1. Set the Power switch to
(manual record).
(The POWER indicator comes on.)
M
A
F
Y A
2. Press FADE/WIPE repeatedly until the desired
mode’s name and icon appear. (They are
L
P
displayed for approximately 2 seconds, then the
name disappears so that only the icon remains.)
Power switch
Recording
Start/Stop
button
3. Press the Recording Start/Stop button to activate
fade-in/out or wipe-in/out.
4. To cancel a fade or wipe, press FADE/WIPE
repeatedly until OFF appears. (OFF is displayed
for approximately 2 seconds and the fade/wipe
standby mode is cancelled.)
POWER
indicator
STOP
R
RETAKE
F
Fades
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
FADER
Fades in/out to a black screen.
B
K
FADE/WIPE
button
MOSAIC
Gradually turns/returns the picture into/from a
mosaic pattern.
60
Chapter 5
Advanced Features
Wipes
C
O
U
N
LI
GH
T
T
E
A
D
R
OF
R
F
A
UT
E
W
M
.
P
O
A
E
ON
E
D
G
I
E
C
T
S
P
O
T
R
R
E
K A T E
F
L
VO
EC
.
R
EC
5
S
SHUTTER
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
+
C
TB
X/
PI
Y
D
EA
ST
+
Wipes in as a black screen from the top and bottom,
closing over the image like a shutter. Wipes out as a
new image, pushing open the black screen vertically
from the center.
M
A
Y
L P
SLIDE
MENU
dial
Wipes in as a black screen moves in from the left to
gradually cover the image. Wipes out as a new image
moves in from right to left.
M
A
F
Y A
L
P
DOOR
Power switch
Recording
Start/Stop
button
Wipes in as the two halves of a black screen open to
the left and right, revealing the scene. Wipes out and
the black screen reappears from left and right to
cover the scene.
CORNER
POWER
indicator
Wipes in on a black screen from the upper right to
the lower left corner, revealing the scene. Wipes out
from lower left to upper right, leaving a black screen.
STOP
R
RETAKE
F
IPE
WINDOW
AE
ADE/W
.
COUNTER R/M
F
P
DIGIFECT
Wipes in on a black screen from the center of the
screen towards the corners, revealing the scene.
Wipes out from the corners to the center, leaving a
black screen.
P.AE button
Note: Pressing and holding the Recording
Start/Stop button allows you to vary the
length for the image during fade in/out or
wipe in/out.
Chapter 5
61
Advanced Features
Program AE With Special Effects
M
1. Set the Power switch to
(manual record). (The POWER indicator comes on.)
2. Press P.AE repeatedly until the desired mode’s name and icon appear. (They are
displayed for approximately 2 seconds, then the name disappears so that only the
icon remains.)
3. To cancel the effect, press P.AE repeatedly until OFF appears. OFF is displayed for
approximately 2 seconds.
Note: Only one mode can be engaged at a time.
SPORTS
High shutter speed clearly captures fast-moving action.
SD : SHADOW
A black mist darkens the picture, as when an ND filter is used. Helps to counter the
effects of glare on the subject.
HZ : HAZE
Makes the picture look misty white, as if you’re using an external fog filter and softens
the image.
TWILIGHT
Dusk, twilight scenery, fireworks, etc., look more natural and dramatic. When Twilight
mode is selected:
•
•
Auto gain control is turned off.
White Balance is set to FINE (day mode), but can also be manually changed to
another mode (see page 67).
•
Auto Focus becomes available only in the range of 10 m (32 ft.) to infinity. To focus
when the subject-to-camera distance is less than 10 m (32 ft.), use manual focusing
(see page 66).
62
Chapter 5
Advanced Features
C
O
U
N
LIG
HT
2
T
E
A
D
R
OF
F
AU
E
R
W
M
TO
.
P
E
A
ON
E
D
G
I
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
S1/2000
+
C
TB
X/
PI
Y
D
EA
ST
+
(1/2000 sec. High Speed Shutter)
Captures faster action than Sports mode.
M
A
A
F
O
Y
L P
Notes:
•
The screen becomes slightly dark in the
High Speed Shutter mode. Use in well-lit
situations.
MENU
dial
•
In the High Speed Shutter or Sports
modes, picture color may be adversely
affected if the subject is lit by alternating
discharge-type light sources such as
fluorescent or mercury-vapor lights.
M
A
F
Y A
L
P
Power switch
Digital Effects
M
1. Set the Power switch to ) (manual record).
(The POWER indicator comes on.)
POWER
indicator
2. Press DIGIFECT repeatedly until the desired
mode’s name and icon appear. (They are
displayed for approximately 2 seconds, then the
name disappears so that only the icon remains.)
STOP
R
RETAKE
F
3. To cancel the effect, press DIGIFECT repeatedly
until OFF appears. (OFF is displayed for
approximately 2 seconds.)
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
DIGIFECT
button
SEPIA
Recorded scenes have a brownish tint like old
photos. Combine this with the 16x9 mode (see
page 58) for a classic look.
B/W MONOTONE
Recorded scenes are shot in black and white.
Combine this with the 16x9 mode (see page 58) for a
classic look.
Chapter 5
63
Advanced Features
NEGA POSI (Negative Positive)
The colors of a picture are reversed.
MOSAIC
Turns recorded scenes into a mosaic pattern.
STRETCH
Doubles the width of the picture horizontally.
Note: Digital Effects can be changed during recording or during Record-Standby.
Exposure Control
This feature automatically adjusts the iris for the best available picture quality, but you
can override it and make the adjustment manually. Manual exposure adjustment is
recommended in the following situations:
•
•
When shooting using reverse lighting or when the background is too bright.
When shooting on a reflective natural background such as at the beach or when
skiing.
•
When the background is overly dark or the subject light.
M
1. Set the Power switch to
(manual record). (The POWER indicator comes on.)
2. Press in the MENU dial. (The CAMERA MENU appears.)
3. Rotate the MENU dial to highlight EXPOSURE. Press in the MENU dial to highlight it.
(The EXPOSURE menu appears.)
4. Rotate the MENU dial to highlight MANU (manual). Press in the MENU dial to select
it. (The menu disappears and 00 (exposure control level counter) appears.)
•
To brighten the image, rotate the MENU dial downward. (The exposure control
level counter increases (maximum +06)).
•
To darken the image, rotate the MENU dial upward. (The exposure control level
counter decreases (maximum –06)).
5. Press in the MENU dial to select it.
6. When finished, press in the MENU dial again to exit.
64
Chapter 5
Advanced Features
Notes:
C
O
U
N
LIG
HT
T
E
A
D
R
OF
F
AU
E
R
W
M
TO
.
P
E
A
ON
E
D
G
I
E
C
T
S
P
O
T
R
R
E
K A T E
•
To return to the factory setting, select
AUTO in step 4.
F
L
VO
EC
.
R
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
+
C
TB
X/
PI
Y
D
EA
ST
+
•
To readjust exposure, repeat the
procedure from step 2.
M
A
A
F
O
Y
L P
Focusing
MENU
dial
Auto Focus
The camcorder’s Full Range automatic focus system
offers continuous shooting ability from close-up to
infinity. However, correct focus may not be
obtainable in the situations listed below (in these
cases use manual focusing):
M
A
F
Y A
L
P
Power switch
•
•
When two subjects overlap in the same scene.
When illumination is low. The low-contrast
warning
appears.
•
When the subject has no contrast (difference in
brightness and darkness), such as a flat, one-
color wall, or a clear, blue sky. The low-contrast
POWER
indicator
warning
appears.
STOP
R
RETAKE
F
•
When a dark object is barely visible in the
viewfinder. The low-contrast warning
appears.
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
•
•
•
When the scene contains small patterns or
identical patterns that are regularly repeated.
When the scene is affected by sunbeams or light
reflecting off the surface of a body of water.
When shooting a scene with a high-contrast
background.
Chapter 5
65
Advanced Features
Manual Focus
C
O
U
N
LI
GH
T
T
E
A
D
R
OF
AU
TO
R
F
E
W
M
.
P
A
E
ON
E
D
G
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
BR
N
ME
U/
K
IN
G
Make the necessary viewfinder adjustments to use
the viewfinder (see page 27).
AC
/TR
+
C
TB
X/
PI
Y
D
EA
ST
+
M
A
M
1. Set the Power switch to
(manual record).
A
F
O
Y
L P
(The POWER indicator comes on.)
2. Press the MENU dial in. (The CAMERA MENU
appears.)
MENU
dial
3. Rotate the MENU dial to highlight FOCUS. Press
in the MENU dial to select it. (The FOCUS menu
appears.)
M
A
F
Y A
L
P
4. Rotate the MENU dial to highlight MANU. Press
in the MENU dial to select it. (The menu
Power switch
disappears and
appears.) The focus is
locked at this point.
5. When finished, press in the MENU dial again to
exit. (
reappears to indicate the focus is
locked.)
POWER
indicator
•
•
To focus on a subject that’s farther away, rotate
the MENU dial upward. appears and blinks.
STOP
R
RETAKE
F
To focus on a nearer subject, rotate the MENU
dial downward. appears and blinks.
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
Notes:
•
If the lens is smeared or blurred,
accurate focusing isn’t possible. Keep the
lens clean, wiping it with a piece of soft
cloth if it gets dirty. If condensation
occurs, wipe the lens with a soft cloth or
wait for it to dry naturally.
•
When shooting a subject close to the
lens, zoom out first (see page 38). When
zooming in the auto focus mode, the
camcorder could automatically zoom out
depending on the distance between the
camcorder and the subject.
•
•
•
To return to Auto Focus, highlight AUTO
in step 4.
To readjust Manual Focus, repeat the
procedure from step 2.
When the focus level cannot be adjusted
any farther or closer,
or blinks.
66
Chapter 5
Advanced Features
White Balance Adjustment
White balance refers to the correctness of color reproduction under various lighting. If
the white balance is correct, all other colors will be accurately reproduced.
The white balance is usually adjusted automatically. However, more advanced
camcorder operators control this function manually to achieve a more professional
color/tint reproduction.
M
1. Set the Power switch to
(manual record). (The POWER indicator comes on.)
2. Press in the MENU dial. (The CAMERA MENU appears.)
3. Rotate the MENU dial to highlight M.W.B. Press in the MENU dial to select it. (The
M.W.B. menu appears.)
4. Rotate the MENU dial to highlight the desired setting.
AUTO
White balance is adjusted automatically (factory preset).
: FINE
Outdoors on a sunny day.
: CLOUD
Outdoors on a cloudy day.
: HALOGEN
A video light or similar type of lighting is used.
MWB
White balance is set manually.
Notes:
•
To return to automatic white balance, select AUTO in step 4. Or rotate the
Power switch to (automatic record).
A
•
White balance cannot be used when the SEPIA or MONOTONE mode (see
page 63) is activated.
Chapter 5
67
Advanced Features
Manual White Balance
C
O
U
N
LI
GH
T
T
E
A
D
R
OF
AU
TO
R
F
E
W
M
.
P
A
E
ON
E
D
G
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
BR
N
ME
U/
K
IN
G
Perform Manual White Balance when shooting under
various types of lighting.
AC
/TR
+
C
TB
X/
PI
Y
D
EA
ST
+
M
A
1. Follow steps 1 through 4 of the white balance
A
F
O
Y
L P
adjustment, and highlight MWB.
2. Hold a sheet of plain white paper in front of the
subject. Adjust zoom or position yourself so that
the white paper fills the screen.
MENU
dial
M
Note: It may be difficult to focus on the
white paper. In such a case, adjust focus
manually (see page 66).
A
F
Y A
L
P
3. Press in the MENU dial until MWB begins
blinking.
Power switch
4. When finished, press in the MENU dial to exit.
•
To change the tint for recording in step 2,
substitute colored paper for white. The white
balance is adjusted based on the color, changing
the tint.
POWER
indicator
Red paper = deeper green
Blue paper = orange
STOP
R
RETAKE
F
Yellow paper = deeper purple.
Notes:
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
•
A subject can be shot under various types
of lighting conditions indoors (natural,
fluorescent, candlelight, etc.). Because
the color temperature is different
depending on the light source, the
subject tint will differ depending on the
white balance settings. Use this function
for a more natural result.
DIGIFECT
button
•
Once you adjust white balance manually,
the setting is retained even if the power
is turned off or the battery removed.
68
Chapter 5
Advanced Features
Date/Time Insert
C
O
U
N
LI
GH
T
T
E
A
D
R
OF
AU
TO
R
F
E
W
M
.
P
E
A
ON
E
D
G
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
You can display the date and time in the camcorder
or on a connected TV, as well as to record them
manually or automatically.
+
BC
/T
IX
Y
D
P
EA
ST
+
M
A
A
F
O
Y
L P
You should have already performed the Date/Time
Setting procedure (see page 22).
M
1. Set the Power switch to
(manual record).
(The POWER indicator comes on.)
MENU
dial
2. Press in the MENU dial. (The CAMERA MENU
M
A
F
appears.)
Y A
L
P
3. Rotate the MENU dial to highlight DATE/TIME
DISP. Press in the MENU dial to select it. (The
DATE/TIME DISP. menu appears.)
Power switch
4. Rotate the MENU dial to highlight the desired
mode. Press in the MENU dial to select it. (The
desired mode is activated.)
POWER
indicator
Notes:
DISPLAY
STOP
R
RETAKE
F
•
•
The selected display can be recorded.
If you do not want to record the display,
select the OFF mode before shooting.
IPE
AE
ADE/W
.
COUNTER R/M
F
P
DIGIFECT
AUTO DATE
•
In this mode, the date is replaced after 5
seconds with AUTO DATE but isn’t
recorded.
•
Your camcorder automatically records
the date for about 5 seconds after you
do the following:
•
•
•
Change the date.
Load a tape.
Select Auto Date Record mode
by rotating the MENU dial.
Chapter 5
69
Advanced Features
Instant Titles
C
O
U
N
LI
GH
T
T
E
A
D
R
OF
AU
TO
R
F
E
W
M
.
P
A
E
ON
E
D
G
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
The camcorder has 8 preset titles in memory. You
can superimpose one of them over the video image.
+
C
TB
X/
PI
Y
D
EA
ST
+
M
A
A
F
O
Y
L P
Instant Titles can be displayed in English, French,
and Spanish.
M
1. Set the Power switch to
(manual record).
(The POWER indicator comes on.)
MENU
dial
2. Press in the MENU dial. (The CAMERA MENU
M
A
appears.)
F
Y A
L
P
3. Rotate the MENU dial to highlight TITLE. Press
in the MENU dial to select it. (The TITLE menu
appears.)
Power switch
4. Rotate the MENU dial to highlight the desired
mode. Press in the MENU dial to select it.
Note: The selected title will remain until OFF
is selected in the TITLE Menu.
POWER
indicator
STOP
R
RETAKE
F
AE
ADE/WIPE
.
COUNTER R/M
F
P
DIGIFECT
70
Chapter 5
Advanced Features
Animation
C
O
U
N
LI
GH
T
T
E
A
D
R
OF
AU
TO
R
F
E
W
M
.
P
E
A
ON
E
D
G
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
.
R
EC
5
S
EC
HT
IG
/BR
NU
ME
G
KIN
AC
/TR
You can shoot a series of pictures, each slightly
different, of the same object for a brief period of
time.
+
C
TB
X/
PI
Y
D
EA
ST
+
M
A
A
F
O
Y
L P
M
1. Set the Power switch to
(manual record).
(The POWER indicator comes on.)
2. Make sure the recording mode is set to SP.
MENU
dial
3. Press in the MENU dial. (The CAMERA MENU
M
A
appears.)
F
Y A
L
P
4. Rotate the MENU dial to highlight TO SYSTEM
MENU. Press in the MENU dial to select it. (The
SYSTEM MENU appears.)
Power switch
Recording
Start/Stop
button
5. Rotate the MENU dial to highlight NEXT. Press in
the MENU dial to select it. (The next page of the
SYSTEM MENU appears.)
6. Rotate the MENU dial to highlight REC TIME.
Press in the MENU dial to select it. (The REC
TIME menu appears.)
POWER
indicator
STOP
R
RETAKE
F
7. Rotate the MENU dial to select the desired
recording time. Press in the MENU dial to select
it. (The SYSTEM MENU reappears with RETURN
highlighted.)
IPE
AE
ADE/W
.
COUNTER R/M
F
P
DIGIFECT
8. Press the MENU dial in again to close the
SYSTEM MENU.
9. Press the Recording Start/Stop button after
focusing on the subject. The recording stops
automatically after the selected period of time.
Repeat for the desired number of pictures.
10. To stop the Animation mode, set REC TIME in
the SYSTEM MENU to OFF.
Chapter 5
71
Advanced Features
Time-Lapse
C
O
U
N
LIGH
T
E
T
A
D
R
O
F
F
A
U
T
O
E
R
W
M
.
P
E
O
N
A
E
D
G
E
C
T
S
O
T
P
R
R
E
K A T E
F
L
VO
EC
.
R
5
S
EC
HT
IG
AC
/BR
G
NU
KIN
ME
/TR
You can record sequentially at preset time spans.
Leaving the camcorder aimed at a specific subject,
you can record subtle changes over an extended
period of time.
+
C
TB
X/
PI
Y
D
EA
ST
+
M
A
A
F
O
Y
L P
1. Set REC TIME using steps 1-7 of Animation (see
page 71).
MENU
dial
2. Rotate the MENU dial to highlight INT. TIME.
Press in the MENU dial to select it. (The INT.
TIME menu appears.)
M
A
F
Y A
L
P
3. Rotate the MENU dial to highlight the desired
interval time. Press in the MENU dial to select it.
Power switch
Recording
Start/Stop
button
4. When finished, press in the MENU dial again to
exit.
5. Press the Recording Start/Stop button.
(Recording and intervals alternate automatically.)
6. To release the Time-Lapse mode, press the
PAUSE
Recording Start/Stop button to display
Then set REC TIME and INT. TIME in the menus
to OFF.
.
Notes (for Animation and Time-Lapse):
•
•
•
•
For best results, make sure the camcorder
is secured when shooting in Animation
or Time-Lapse mode.
Fade-in/out or wipe-in/out can’t be
performed during Animation or Time-
Lapse shooting.
After using Animation or Time-Lapse
recording, make sure the modes are
deactivated.
Animation and Time-Lapse are cancelled
when the power is shut off or when the
tape is ejected.
72
Chapter 5
Chapter 6
Other Information
Chapter Overview:
•
•
•
•
•
•
•
•
•
•
Troubleshooting
Final Notes
Care and Cleaning
Traveling Tips
Specifications
Customer Assistance and Service
Limited Warranty
FCC and Industry Canada Information
Optional Accessories
Index
Changing Entertainment. Again.
73
Other Information
Troubleshooting
If you’re having problems with your camcorder, try the solutions in this section. If the
problem still exists, please consult your nearest RCA authorized service center.
External noise and interference (from a TV, a radio, etc.) might prevent your camcorder
from functioning properly. In such cases, first disconnect its power supply unit (battery
pack, AC power supply, etc.); and then reconnect it and proceed as usual from the
beginning.
Power Problems
No power is supplied.
•
•
•
The battery pack has not been attached correctly (see page 16).
The battery pack is not charged (see page 16).
The power supply has not been correctly connected (see page 11).
The power suddenly goes off and does not come back on by itself.
•
•
•
Turn the Power switch off and then on again.
The battery pack has completely discharged.
Remove the tape and disconnect the power source, then after a few minutes, try
reconnecting and turning the power back on. If it still does not come on, consult
your nearest RCA authorized service center.
Feature and Function Problems
Some menus or features are not available.
A
M
The Power switch is set to . Set it to
and try again.
During recording, the icons do not appear.
Set DISPLAY to FULL in the SYSTEM MENU (see page 58).
Vertical white lines appear when shooting a very bright object.
This sometimes occurs when there is a lot of contrast between the background and the
object. It is not a defect of the camcorder. Try shooting from a different angle or adjusting
the lighting conditions.
74
Chapter 6
Other Information
Bright, crystal-shaped spots appear in the LCD monitor and the
viewfinder.
Sunlight is directly entering the lens. This is not a defect of the camcorder.
The rear of the LCD monitor is hot.
The light used to illuminate the LCD monitor causes it to be hot. Close the LCD monitor
to turn it off or set the Power switch to OFF, and let the unit cool down.
Colored bright spots appear all over the LCD monitor or the viewfinder.
The LCD monitor and the viewfinder are made with high-precision technology. However,
black spots or bright spots of light (red, green or blue) may appear constantly on the LCD
monitor or in the viewfinder. These spots are not recorded on the tape. This is not due to
any defect of the unit.
The icons and the picture color on the LCD monitor are not clear.
This may occur when the surface or the edge of the LCD monitor is pressed.
The LCD monitor, the viewfinder and the lens are dirty.
Wipe them gently with soft cloth. Gently wipe the LCD monitor in a semicircle because
wiping strongly spreads the stain and it won’t come out easily.
An error number (i.e. E03) appears.
Turn the camcorder’s power off, then disconnect the power source. After a few minutes,
try turning the power on again.
The image is out of focus.
The eyepiece focus control needs to be adjusted (see page 27).
The scene being shot is adversely affecting the operation of Auto Focus (see page 65).
Even though the lens cap is detached, the LENS CAP warning icon
(see page 29) blinks.
The LENS CAP warning icon may blink when the camcorder is used in dark areas,
regardless of whether the lens cap is attached or detached.
Chapter 6
75
Other Information
Recording Problems
Recording cannot be performed.
Make sure the Erase Protection tab is in the position that allows recording. If not, slide
the tab. Some tapes have removable tabs. If the tab has been removed, cover the hole
with adhesive tape.
Recording does not start.
A
M
The camcorder Power Switch has not been set to or
(see page 12).
Animation or Time-Lapse is not available.
Before recording in the Animation mode at the very beginning of a tape, set the
camcorder to the Recording mode for about 5 seconds, so that the tape runs smoothly.
Using the Fade-in function at this point is a good way to begin an animated program.
Playback Problems
The tape is running, but there is no playback picture.
The TV has not been set to its VIDEO input channel.
If Audio/Video connection is used, the TV’s VIDEO/TV switch has not been set to
VIDEO.
Playback picture is blurred or interrupted.
The video heads are dirty or worn out. Consult your nearest RCA authorized service
center for head cleaning or replacement.
The tape stops during fast-forward or rewind.
The Counter Memory Function has been activated (see page 47).
Rewinding or fast-forwarding can’t be performed.
The tape is already fully wound on one reel or the other.
The picture is blurred in the Quick Review or Retake mode.
This is normal while recording in the SLP mode. Some noise may be present while
recording in the SP mode.
76
Chapter 6
Other Information
The date and time displays disappear.
If you remove the power source from the camcorder while the power is on, all settings
and selections are erased. Make sure to turn the camcorder’s power off before
disconnecting the power source.
The wrong date and time are displayed/recorded.
If you have not performed Date/Time Setting (see page 22), the date and time are not
displayed/recorded correctly. Be sure that Date/Time setting is carried out.
The tape won’t eject.
The battery pack is running low.
If the LCD monitor is not open more than 60˚, the EJECT switch does not function.
Chapter 6
77
Other Information
Final Notes
Power
•
Perform charging where the temperature is between 10°C and 35°C (50°F and 95°F).
20°C to 25°C (68°F to 77°F) is the ideal temperature range for charging. If the
environment is too cold, charging may be incomplete.
•
•
Charging times are for a fully discharged battery pack.
Charging time varies according to the ambient temperature and the status of the
battery pack.
•
•
To avoid interference with reception, do not use the AC power supply near a radio.
Since the AC power supply processes electricity internally, it becomes warm during
use. Be sure to use it only in well-ventilated areas.
•
The following stops charging or discharging:
A
M
•
•
•
•
Setting the Power switch to
,
, or
.
Disconnecting the AC power supply from the camcorder.
Unplugging the AC power supply’s cord from the AC outlet.
Detaching the battery from the camcorder.
Date/Time Settings
•
The date/time cannot be stored in memory if the built-in clock battery runs out.
Consult an authorized RCA dealer for replacement, or set the date/time as necessary
before you start shooting.
78
Chapter 6
Other Information
Video Recording
A
M
•
When the Power switch is set to or
and the LCD monitor is opened at an angle
of 25˚ or more, the LCD monitor switches on and the viewfinder switches off
automatically to save power.
•
•
The cassette tape holder can’t be opened unless a power supply is attached.
There may be a delay after you slide EJECT until the cassette tape holder opens. Do
not use force.
•
•
•
The time required to calculate the remaining tape length, and the accuracy of the
calculation, may vary according to the type of tape used.
The tape remaining time icon is accurate only if the correct tape length has been
selected (see page 24).
TAPE END appears when the tape reaches its end, and the power goes off
automatically if left in this condition for 5 minutes.
TAPE END also appears when a tape whose tape is already at its end is loaded.
•
•
If the Recording Start/Stop button is pressed after the Record-Standby mode has
continued for over 5 minutes, recording may not start immediately.
While shooting, sound is not heard from the speaker.
TBC (Time Base Corrector)
•
The TBC icon turns yellow (gray with a camcorder equipped with a black/white
viewfinder) while TBC is working.
•
•
•
•
TBC does not work during still playback and shuttle search.
The TBC icon turns white while TBC is not operative.
It may take a few seconds before TBC actually starts working.
The picture may be distorted if the TBC mode is activated or deactivated at the edit-
in/-out points or when normal playback resumes after still playback or shuttle
search.
•
If the playback picture is distorted when TBC is set to on, turn off TBC.
Chapter 6
79
Other Information
Tapes
•
A power supply must be attached to load or eject a tape.
•
When loading a tape, it takes a few seconds for the cassette tape holder open. Never
apply force to the holder or door cover as this might result in damage to the
camcorder and void the warranty.
•
•
•
•
•
If the cassette tape holder does not open after a few seconds, close the holder door
and try again. If it still does not open, turn the camcorder off, then on again.
If the tape does not load properly, open the cassette tape holder door and fully
remove the unit. Wait a few minutes and reinsert it.
When the camcorder is suddenly moved from a cold environment to a warm
environment, wait a short time before opening the cassette tape holder door.
Closing the cassette tape holder door before the holder comes out may damage the
camcorder.
Even when the camcorder is turned off, a tape can still be loaded or unloaded. After
the cassette tape holder is closed with the camcorder switched off, though, it may
not recede. Turn the power on before loading or unloading tapes.
•
When recording, once the cassette tape holder door is open, a blank portion will be
recorded on the tape or a previously recorded scene will be taped over regardless of
whether the tape holder came out or not.
80
Chapter 6
Other Information
Care and Maintenance
Care and Cleaning
After Using the Camcorder
1. Set the Power switch to OFF.
2. Open the LCD monitor at least 60˚.
3. Slide the EJECT switch to open the cassette tape holder, then remove the tape.
4. Press the area marked CLOSE to close and lock the cassette tape holder.
5. Close and lock the LCD monitor.
6. Slide the BATTERY RELEASE switch and remove the battery pack.
7. Reattach the lens cap.
Cleaning The Camcorder
1. Clean the exterior, wiping gently with a soft cloth. For heavy dirt, use diluted, mild
soap and wring the cloth well. Then wipe again with a dry cloth.
2. Open the LCD monitor and wipe it gently with a soft, dry cloth. Close it when done.
3. To clean the lens, blow it with air using a blower brush. Wipe gently with lens
cleaning paper.
4. To clean the viewfinder, raise it to the vertical position. Turn the eyepiece
counterclockwise and pull it out. Insert a lens blower or soft cloth into the gap to
clean the interior. Reattach the eyepiece and turn it clockwise until it snaps into
place.
Notes:
•
•
•
•
Avoid using strong cleaning agents such as alcohol.
Cleaning should be done only after the power supply has been disconnected.
Mold may form if the lens is left dirty.
When using a cleaner or chemically treated cloth, refer to the cautions of each
product.
Chapter 6
81
Other Information
Proper Care and Storage
•
Keep dirt from entering the camcorder’s cassette tape door. Dust and grit are abrasive
and cause excessive wear to both the recording/playback heads and tapes.
•
•
Always cap the lens when the camcorder is not in use.
Before handling the camcorder, make sure your hands and face are free from any
chemical products such as suntan lotion, as it might damage the finish.
•
The camcorder might be damaged by improper storage or handling. Do not subject the
camcorder to swinging, shaking, or dropping.
•
•
Do not store the camcorder in temperatures below -22˚F (-30˚C) or above 149˚F (65˚C).
When the camcorder is not in use, always remove the tape and AC power supply/
charger or battery.
•
Retain the original carton for future storage or shipping purposes.
Tape Care and Storage
•
When finished with a tape, rewind it, remove it from the camcorder, and label it.
Protect the tape using the erase protection tab if necessary.
•
Store tapes vertically in their protective cases at normal room temperatures. Never
leave the camcorder or tapes in a car or outdoors for an extended period of time.
Excessive heat or cold might damage tapes.
•
•
Keep tapes away from strong magnetic fields such as electric motors, speakers and
other devices.
Keep dust from entering the cassette tape compartment. All dust is abrasive and
causes excessive wear on the tape and the camcorder’s recording and playback
heads.
•
•
Never use tapes with damaged or spliced tape.
Do not use a tape if it has been damaged or exposed to moisture. The tape might
jam and/or damage the camcorder.
82
Chapter 6
Other Information
Things to Avoid
•
Do not attempt to disassemble the camcorder. There are no user-serviceable parts inside.
•
Avoid operating the camcorder immediately after moving it from a cold location to a
warm location. Give the camcorder 1-1/2 to 2 hours to reach a stable temperature before
inserting a tape.
•
In cold to warm conditions, condensation might occur causing the tape to stick to the
recording heads and damage the camcorder or tapes.
•
•
Never aim the camcorder at the sun or other bright objects.
Do not leave the camcorder in direct sunlight for extended periods of time. The resulting
heat buildup might permanently damage the camcorder’s internal parts or reduce the
life of the clock battery.
•
•
Do not operate the camcorder in extremely humid environments.
Do not operate the camcorder near the ocean as salt water or spray might damage the
internal parts of the camcorder.
•
•
Do not operate the camcorder for extended periods in temperatures below 40˚F (4˚C) or
above 95˚F (35˚C).
Do not expose the camcorder or power supply/charger to rain or moisture. If any
component becomes wet, turn off the power and take the unit to an authorized RCA
camcorder service provider.
•
Do not use an power supply/charger or batteries other than the ones specified for the
camcorder. Using the wrong accessories might cause damage to the camcorder.
Traveling Tips
•
Write down your camcorder’s serial number and keep it separate from the camcorder
when traveling. If your camcorder is lost or stolen, you will be able to identify it.
•
Use extra care to avoid damage to your camcorder and accessories when operating
them at a beach or pool. Spray, sand, and dust should be avoided. If your lens has
been exposed to the elements, clean it only with proper lens cleaning supplies.
•
•
Make sure you have any plug adapters that you might need before taking your
camcorder to other countries. Consult your dealer for advice.
Carry your camcorder in a carrying case when traveling. See the accessories section
(page 92) for a case designed especially for this camcorder. An ordinary suitcase or
carry bag does not offer the protection your camcorder needs. Treat your camcorder as
carry-on luggage to protect it from rough handling.
Chapter 6
83
Other Information
Specifications
Specifications
Dimensions (W x H x D)
206 mm x 112 mm x 118 mm (8-1/8" x 4-7/16"
x 4-11/16") (with the LCD monitor closed and
with the viewfinder fully tilted downward)
Camcorder
Pickup
1/4" format CCD
Format
VHS NTSC standard
Lens
F1.6, f = 3.9 mm to 62.4 mm, 16:1 power
zoom lens with auto iris and macro control,
filter diameter 40.5 mm
Power source
DC 11 V
supply)
(Using AC power
Viewfinder
Electronic viewfinder with .5” black and white
CRT.
DC 6 V
(Using battery pack)
Power consumption
Viewfinder on:
4.0 W (CC6364)
4.5 W (CC6374)
White balance adjustment
Auto/Manual adjustment
LCD monitor system
2.5" diagonally measured, LCD panel/TFT
active matrix
LCD monitor on:
5.2 W (CC6364)
5.4 W (CC6374)
Speaker
Monaural
Video light: 3.0 W
Signal system
NTSC-type
Audio/Video Jacks
Video
Video recording system
Luminance: FM recording
Color: Converted sub-carrier direct
recording conforms to VHS standard
Cassette tape
1 V (p-p), 75 Ω unbalanced, analog output
(via Video output connector)
Audio
VHS-C cassette tape
300 mV (rms), 1 kΩ analog output (via Audio
Tape speed
SP: 33.35 mm/sec. (1-5/16 ips)
SLP: 11.12 mm/sec. (7/16 ips)
output connector)
Recording time (max.)
SP: 40 minutes
SLP: 120 minutes (with TC-40)
AC Power Supply
Power requirement
U.S.A. and Canada: AC 120 V, 60 Hz
Other countries: AC 110 V to 240 V‘, 50 Hz/60
Hz
Operating temperature
0°C to 40°C (32°F to 104°F)
Operating humidity
35% to 80%
Output
DC 11 V , 1 A
Storage temperature
–20°C to 50°C (–4°F to 122°F)
Dimensions (W x H x D)
59 mm x 31 mm x 69 mm (2-3/8" x 1-1/4" x 2-
3/4")
Weight
Approx. 900 g (2.0 lbs)
Weight
Approx. 130 g (0.29 lbs)
84
Chapter 6
Other Information
CCuustosmteormAsseisrtanAcesasnidsStearvniccee and Service
Customer Assistance and Service
You can reach Thomson at the following number:
800-283-6503
(Toll free inside U.S.A.)
Our toll-free camcorder number operates from 8 a.m. to 5 p.m. CST Monday – Friday for
U.S. customers only
Thomson provides a toll-free telephone number to help with any problems
encountered with the camcorder. Many problems can be diagnosed over the
phone, but, if necessary, repair or replacement will be arranged. For faster
service, have the camcorder’s model/serial number and date of purchase ready
when you call. If your unit is out of warranty, we will quote the cost of a repair
or replacement unit to you.
Returning equipment to Thomson for repair or exchange
If we are unable to resolve your problem over the phone, we will gladly service
your unit or exchange it for a new or refurbished camcorder. Refer to the limited
warranty on the reverse side to learn about your specific rights and
responsibilities.
Always consult Thomson and get a Service Request number before returning
anything! Obtain a Service Request (SR) number from the telephone
representative before returning your equipment to avoid delays, accounting
errors, or even loss of your unit.
Chapter 6
85
Other Information
Important information to customers who ship defective
equipment to Thomson Consumer Electronics
The Thomson representative who authorized the return of your equipment will
give you an SR number over the phone. They will also provide you with
instructions on where and how to return your camcorder. Write the number in
large, clear characters on the outside of the box. To avoid confusion and
misunderstandings, shipments without an SR number clearly visible on the
outside of the box will be returned to you at your expense.
Include a brief note describing the problem and any conversations about the
problem you have had with Thomson personnel.
Include your name, address and model/serial number of the camcorder. These
numbers are located on the bottom of the camcorder.
If the camcorder is within the warranty period, please provide a copy of the bill
of sale to verify purchase date. Use the original box and packing material to
protect the equipment from damage in shipment.
For your protection, insure all shipments for full replacement value and use a
reliable shipper. Thomson assumes no responsibility for warranty shipments from
the customer to the factory if not shipped in the manner prescribed
by Thomson.
86
Chapter 6
Other Information
Limited Warranty
Limited Warranty
What your warranty covers:
•
Any defect in materials or workmanship.
For how long after your purchase:
•
90 days for labor charges.
•
One year for parts.
The warranty period for rental units begins with the first rental or 45 days from date of
shipment to the rental firm, whichever comes first.
What we will do:
During the initial 90 days
•
Exchange your camcorder with a new or refurbished unit, or repair your camcorder.
The option will be ours. There will be no cost to you.
After the 90 days and within one year
•
Exchange your camcorder with a new or refurbished unit, or repair your camcorder.
The option will be ours. Parts will be provided at no charge, but you will be
responsible for the cost of labor required for the repair.
How you get service:
•
Call 1-800-283-6503 and have your unit’s date of purchase and model/serial number
ready. The model/serial number information is on the bottom of your camcorder.
•
A representative will troubleshoot your problem over the phone. If the representative
determines that you should receive a replacement unit, you will be provided with a
Service Request (SR) number and the location of a nearby exchange point if one
exists. No returns will be accepted without the SR number.
Chapter 6
87
Other Information
To receive a replacement Camcorder before you return yours:
Option I
1. Provide your Discover, MasterCard, or Visa account number and expiration date to
our phone representative. This is for security purposes. If we receive your unit,
excluding all accessories, within 14 days from the date you were provided the SR
number, only items not covered by warranty will be charged to your account. IF
YOUR UNIT IS NOT RECEIVED WITHIN 14 DAYS, THE SUGGESTED RETAIL
VALUE OF THE CAMCORDER WILL BE CHARGED TO YOUR CREDIT CARD. This
amount, less $10.00 handling, will be credited if the unit is subsequently received.
2. We will send you a replacement unit.
3. Ship the unit back to us, excluding all accessories, using the replacement unit’s
carton. Shipping instructions will be included in the carton along with your SR
number which will allow you to easily ship the unit back to us. Make sure you
insure your shipment in case of damage or loss. Include with the shipment:
•
Evidence of purchase date, such as a bill of sale to verify your unit’s warranty
eligibility.
•
•
A brief note describing your camcorder’s problem.
Your name, address and phone number.
Return transportation, storage, handling, and insurance costs are your sole responsibility.
We accept no liability in case of damage or loss.
Option II
1. For a fee of $10.00, we will send a replacement unit to the exchange point.
2. The exchange location will notify you of its arrival.
3. Take your unit, excluding all accessories, and your evidence of purchase date, such
as a bill of sale, to the exchange location and you will be provided the new or
refurbished unit.
4. If the repairs were covered by your warranty, you will not be billed.
To receive a replacement unit after we have received your unit:
1. Write the SR number on the outside of the carton used to return the unit.
Make sure you insure your shipment in case of damage or loss.
2. Carefully pack the unit, excluding all accessories, using the original box and packing
material if possible.
3. Include with the shipment:
•
Evidence of purchase date, such as a bill of sale, to verify your unit’s warranty
eligibility.
88
Chapter 6
Other Information
•
•
A brief note describing your camcorder’s problem.
Your name, address and phone number.
Return transportation, storage, handling, and insurance costs are your sole responsibility.
We accept no liability in case of damage or loss.
4. The representative will advise the address to mail a cashier’s check or money order
for payment if there are any out of warranty labor or parts charges and you elect not
to use your credit card.
5. Upon receipt of your product, a new or refurbished unit will be shipped to you.
To have your Camcorder repaired by an Authorized RCA Camcorder
Service Center:
•
Check with your dealer or call 1-800-336-1900 for the Authorized RCA Camcorder
Service Center nearest you.
•
•
Take your unit to the Authorized RCA Camcorder Service Center of your choice.
Show the Authorized RCA Camcorder Service Center representative evidence of
purchase date, such as a bill of sale.
•
Pick up your camcorder when repairs are complete.
What your warranty does not cover:
•
•
•
Adjustment of customer controls.
Damage from misuse or neglect.
A unit that has been modified or incorporated into other products or is used for
institutional or other commercial purposes.
•
•
•
•
Batteries for remote control and clock.
Cleaning of video/audio heads.
Camcorders purchased or serviced outside the U.S.A.
Return transportation, storage and handling costs of your unit, including insurance
for loss or damage.
•
Acts of nature, such as but not limited to lightning damage.
Product Registration:
•
Please complete and mail the Product Registration Card packed with your camcorder.
It will make it easier to contact you should it ever be necessary. The return of the
card is not required for warranty coverage.
Chapter 6
89
Other Information
How State Law relates to warranty:
•
This warranty gives you specific legal rights and you also may have other rights that
vary from state to state.
If you purchased your camcorder outside the United States:
•
This warranty does not apply. Contact your dealer for warranty information.
Service calls that do not involve defective materials or workmanship are
not covered by this warranty. Costs of such calls are the sole responsibility
of the purchaser.
90
Chapter 6
Other Information
FCC and Industry Canada Information
FCC Regulations state that unauthorized changes or modifications to this equipment may
void the user’s authority to operate it.
This device complies with part 15 of FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
This Class B digital apparatus complies with the Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme a la norme NMB-003 du Canada.
This equipment has been type tested and found to comply with the limits for a Class B
Digital Device in accordance with the specifications in Part 15 of the FCC rules. These
rules are designed to provide reasonable protections against radio and television
interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television reception (which you can
determine by turning the equipment off and on), try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna (that is, the antenna for the radio or television
that is “receiving” the interference).
Change the position of the Camcorder with respect to the radio or television equipment
that is receiving interference.
Move the Camcorder away from the equipment that is receiving interference.
Plug the Camcorder into a different wall outlet so that the Camcorder and the equipment
receiving interference are on different branch circuits.
If these measures do not eliminate the interference, please consult your dealer or an
experienced radio/television technician for additional suggestions. Also, the Federal
Communications Commission has prepared a helpful booklet, “How To Identify and
Resolve Radio/TV Interference Problems.” This booklet is available from the U.S.
Government Printing Office, Washington D.C. 20402. Please specify stock number 004-
000-00345-4 when ordering copies.
Chapter 6
91
Other Information
Optional Accessories
We invite you to take a look at some great ideas for sparking creativity and adding to the
fun of using your camcorder. The following pages have a selection of accessories to help
make your memorable moments look and sound even better.
These accessories are designed to make the process of recording and watching your
videos more enjoyable.
To order accessories, contact your local Dealer.
If a dealer is not nearby, all accessories are available through toll-free ordering or by
using the order form found on page 95.
AC201A Soft Carrying Case
Custom compact soft case designed especially to
provide protection and utility for your camcorder and
most accessories. Rugged fabric lined with soft
nonabrasive material and generous padding. Has
three outside pockets with storage for lens filters,
adapters, batteries, and tapes.
ACS091 Shoulder Strap
Designed to replace the shoulder strap that came
with your camcorder.
244427 (FB1260) Rechargeable
Battery Pack
Replacement battery for the one that came with your
camcorder.
All specifications and descriptions of accessories are subject to change without notice.
92
Chapter 6
Other Information
VH83 A/V Cable
Replacement for the included A/V cable (CC6364).
Used to attach the camcorder to an external
component like a TV or VCR.
Using the Optional AC088 Tripod
Mounting the camcorder on a tripod, such as AC088, keeps the camcorder steady and
produces excellent video results.
This tripod’s fluid-effect head provides smooth camera pan and tilt. The quick-release
mount makes it easy to attach or remove the camcorder. The grooved, tubular 3-section
leg design folds down to 26" when not in use. Rubber feet allow for sure footing.
To order accessories, contact your local Dealer.
Cautions:
•
•
•
Before using a tripod, make sure it is stable
enough to hold the camcorder without
falling over. Do not transport the
camcorder attached to the tripod.
When attaching your camcorder to a
tripod, be careful not to force the tripod
screw into the camcorder’s tripod
mounting hole.
The tripod screw should not protrude into
the camcorder more than approximately
three-eighths (3/8) of an inch. Forcing the
screw could damage the mounting hole on
the bottom of the camcorder.
Chapter 6
93
Other Information
If a dealer is not nearby, you can also follow the directions below to order by telephone
or direct-by-mail.
United States and Canada Orders
To place your order by phone, have your Visa, MasterCard, or Discover card ready and
call the toll-free number listed below.
Use this number only to place an order for accessory items listed on this
order form.
1-800-338-0376
To place your order by mail, detach and mail the completed order form with credit card
information, money order, or check in U.S. currency (made payable to Thomson
Consumer Electronics, Inc.) to the following address:
Video Accessories
PO Box 8419
Ronks, PA 17573
94
Chapter 6
Other Information
Accessories Order Form
Description
Part No.
Price
Qty.
Total
Super Lightweight Tripod
Soft Camcorder Case
Shoulder Strap
AC088
$ 49.95
$ 34.95
$ 12.95
$ 49.95
$ 5.95
AC201A
ACS091
244427
VH83
Rechargeable Battery (1 hour)
A/V Cable
Extended Life Battery
BB99L
$ 69.99
All prices subject to change without notice.
Total Merchandise
$_________
$_________
Sales Tax
We are required by law to collect the
appropriate sales tax for each individual
state, county, and locality to which the
merchandise is being sent.
Shipping and Handling
$_5__.0_0_____
Total Amount Enclosed
$_________
Use VISA, MasterCard, or Discover.
Money order or check must be in U.S.
currency only. No COD or cash.
Please complete other side also
Chapter 6
95
Other Information
Charge your order on your VISA,MasterCard,
or Discover Card by filling in below
USE YOUR CREDIT CARD
IMPORTANT: Copy complete account number from your VISA card
¤
Expiration date:
IMPORTANT: Copy complete account number from your MasterCard
s
r
r
TM
Expiration date:
Copy Number above your name on MasterCard
IMPORTANT:
Copy complete account number from your Discover Card
Expiration date:
AUTHORIZED SIGNATURE
Prices are subject to change without notice.
A complete and correct order will
save you days of waiting.
Print or type your name and
address clearly.
Name:
Street:
Apt:
Zip:
City:
State:
Please make sure that both sides of this form have been filled out completely.
Allow 4 weeks for delivery.
All accessories are subject to availability.
96
Chapter 6
This Page Left Blank Intentionally
Index
Index
Symbols
C
5-Second recording 37
Cassette
adapter 49
Cassettes
care and storage 80
record protection tab 13
Charge marker 17
Charging the battery 16
Choose your connection 49
Cleaning 81
Clock adjustment 22
Connecting to a TV (or VCR) with
A/V Inputs 52
Counter memory 47
Customer assistance and service 85
A
A (audio) and V (video) jacks 52
Accessories 92
carrying case 92
order form 95
tripod 93
Advanced features 60
Animation 71
Animation and Time-Lapse
recording icons 33
Area marked close 13
Assistance 6
Audio/video input jacks 52
Auto focus 65
D
Automatic recording
AutoShot 12
Date and time
setting 22
Date/time insert 69
Digital and optical zoom 38
Digital effects 63
B
Basic playback 44
Battery
E
care and storage 19
life 19
Exposure control 64
Exposure icons 32
Eyepiece focus control 27
Bright and volume icons 32
Buttons and controls 7
98
Chapter 6
Index
F
M
Fade and wipe icons 32
Fade/wipe effects 60
FCC information 91
Final notes 78
Focus icons 33
Focusing 65
Manual focus 66
Manual white balance 68
Manual white balance icons 31
Menu definitions 57
MENU/BRIGHT dial 14
Menus 56
G
O
Getting started 9
On-screen icons 28
Optical zoom 38
Order form 95
H
Other icons 33
Handstrap
adjusting 10
P
I
Parts checklist 6
Playback
basic 44
Important information 2
Industry Canada information 91
Insert a cassette tape 13
Instant titles 70
still 47
using cassette adapter 49
Playback on a TV (or VCR) with
A/V inputs 53
Playback options 44
Plug adapter 20
Power supply
J
Journalistic shooting 36
attaching 11
L
POWER switch 53
Power zoom lever
volume control 45
Powering the camcorder 12, 16
Preset titles 31
LCD monitor 14, 26
LCD monitor brightness
adjusting 45
Lens cap
attaching 10
Limited warranty 87
Product registration 2
Program AE with special
effects 62
Chapter 6
99
Index
Q
T
Quick review 37
Tape care and storage 82
Tape dubbing 54
Tape length
R
setting 24
Record protection tab 13
Recording
icon 15, 36
playing back 15
Recording and playback icons 29
Recording tips 42
Refreshing the battery 18
Removing the battery 18
Removing the power supply 20
Retake 38
Tape length icon 33
Tape recording speed
setting 23
Tape speed icon 33
TBC (Time Base Corrector) 46
TBC (Time Base Corrector)
icon 34
Time counter icon 34
Time-Lapse 72
Time-remaining icon 34
Tips
S
traveling 83
Title menu 31
Tracking
adjusting 46
Seeing what you are recording 26
Self-recording 37
Service 85
Tracking icons 31
Traveling tips 83
Troubleshooting 74
Turning off the camcorder 16
Shoulder strap 6
Shuttle search 48
Speaker volume 45
Specifications 84
Start recording 15
Status icons 31
V
Steady Pix icon 33
Steady Pix™ 40
Still playback 47
STOP button 53
Video light 12, 40
Video light details 41
Viewfinder 14
100
Chapter 6
Index
W
W and T (zoom lever) 38
Warning icons 28
Warranty 87
White balance adjustment 67
Z
Zoom level icon 32
Zoom lever 32, 38
Zooming
digital 38
optical 38
zoom lever 38
Chapter 6
101
Please do not send any products to the Indianapolis address listed in this manual or
on the carton. This will only add delays in service for your product.
10330 North Meridian Street
Indianapolis, IN 46290
©2001 Thomson Consumer Electronics, Inc.
Trademark(s)® Registered
Marca(s) Registrada(s)
Printed in Japan
TOCOM 1571626A
Part No. LYT0729-001A(VP)
|