FRANÇAIS
Guide de démarrage
Inspectez vos haut-parleurs avec soin. Si vous constatez des dommages ou s’il manque des pièces, contactez votre
revendeur Polk Audio. Conservez la boîte et l’emballage—ils assureront la meilleure protection de vos haut-parleurs
en cas de transit éventuel.
Limites d’opération
Un haut-parleur peut être endommagé lorsqu’un amplificateur, quelle que soit sa puissance, est poussé au delà de ses
limites (typiquement à la position 12h ou 13h du contrôle de volume). L’amplificateur surchargé génère alors un niveau
élevé de distorsion et le son devient rauque et éraillé. Contrairement à ce qu’on puisse penser, un haut-parleur peut-être
endommagé plus facilement par un amplificateur de faible puissance poussé au delà de ses limites que par un amplific-
ateur de haute puissance.
Service ou assistance technique
Si, après avoir suivi toutes les instructions, vous éprouvez des difficultés, vérifiez toutes vos connexions. Si vous en
concluez que le problème est relié au haut-parleur, communiquez avec votre revendeur Polk Audio ou contactez le Service
à la Clientèle de Polk Audio au 1-800-377-7655 (L-V, 9-18, HNE, Canada et É.-U. seulement). À l’extérieur des É.-U. et du
Canada, composez le 410-358-3600. Vous pouvez aussi nous contacter par courriel à l’adresse: [email protected].
Pour plus d’information—incluant des chroniques pratiques, des FAQ et des manuels d’utilisation en ligne, visitez notre
DEUTSCH
Erste Schritte
Inspizieren Sie bitte Ihre Lautsprecher sorgfältig. Verständigen Sie Ihren Polk Audio-Fachhändler, falls Sie Schäden oder
fehlende Teile bemerken. Behalten Sie den Karton und das Verpackungsmaterial, da diese Ihre Lautsprecher bei einem
etwaigen Transport am besten schützen.
Sichere Betriebsgrenzen
Wenn ein Verstärker, ungeachtet seiner Leistung in Watt, lautere Musik abspielt, als er bei niedriger Verzerrung produzieren
kann, kann dies die Lautsprecher beschädigen. Dies ist meist höher als die 12-oder 1-Uhr-Position des Lautstärkereglers. Bei
einem Betrieb mit dieser Lautstärke kann der Verstärker sehr hohe, hörbare Verzerrungen erzeugen, welche die Musik rau und
grob klingen lassen können. Entgegen der verbreiteten Ansicht ist es wahrscheinlicher, dass ein Lautsprecher dadurch
beschädigt wird, dass man zu viel Lautstärke aus einem schwachen Verstärker oder Receiver herausholen will, als dass man
einen zu starken verwendet.
Technischer Kundendienst und Service
Wenn Sie Probleme haben, nachdem Sie den Installationsanweisungen gefolgt sind, sollten Sie alle Kabelverbindungen
nochmals prüfen. Wenn Sie zu dem Schluss kommen, dass das Problem am Lautsprecher liegt, kontak-tieren Sie bitte
den autorisierten Polk Audio-Händler, bei dem Sie den Lautsprecher gekauft haben, oder rufen den Polk Audio-
Kundendienst unter 800-377-7655 (M-F, 9-18 Uhr US-Ostküstenzeit, nur USA) an oder senden eine E-Mail an
[email protected]. Von außerhalb der USA rufen Sie +1 410-358-3600 an.
Detaillierte Anweisungen, Antworten auf häufig gestellte Fragen und Online-Handbücher finden Sie auf der preisgekrönten
M o r e I n f o
@
w w w . p o l k a u d i o . c o m / c a r
3
PORTUGUÊS
Primeiros passos
Inspecione cuidadosamente cada alto-falante. Notifique o revendedor da Polk Audio caso note algum dano ou caso
estiver faltando algum componente. Guarde a caixa e o material de embalagem, pois são mais adequados para proteger
os alto-falantes caso precisem ser transportados.
Limites seguros de operação
Os alto-falantes podem ser danificados quando um amplificador, independentemente de sua potência, for operado a níveis
de reprodução mais elevados do que consegue produzir a níveis baixos de distorção. Esta posição é geralmente após
a posição correspondente ao “meio-dia ou 1 hora” no controle de volume. A operação nesse volume pode resultar em
níveis muito elevados de distorção audível a partir do amplificador, o que pode acrescentar um som desarmonioso e
estridente ao áudio sendo reproduzido. Ao contrário do que se pensa, é mais fácil danificar um alto-falante ao tentar
maximizar o volume a partir de um amplificador ou receiver de baixa potência do que de um de alta potência.
Ajuda ou assistência técnica
Se tiver alguma dificuldade depois de seguir as orientações de instalação, verifique as conexões dos cabos. Caso consiga
isolar o problema ao alto-falante, entre em contato com o revendedor autorizado Polk Audio onde adquiriu o produto ou
com o Serviço de Atendimento ao Cliente da Polk Audio ligando para 1-800-377-7655 (de segunda a sexta-feira, das
9h00 às 18h00 do horário de Nova York—apenas nos EUA) ou por e-mail pelo endereço [email protected]. Caso
esteja em outro país, ligue para 1-410-358-3600.
Nosso website premiado contém informações mais detalhadas, incluindo artigos informativos com procedi-
mentos passo a passo, perguntas freqüentes e manuais eletrônicos. Para obter essas e outras informações
ITALIANO
Per iniziare
Ispezionare i diffusori attentamente e avvisare il rivenditore Polk Audio se si rilevano componenti danneggiati
o mancanti. Conservare la scatola e il materiale d'imballaggio, che serviranno a proteggere i diffusori nel modo
migliore se devono essere trasportati.
Limiti di sicurezza in relazione al funzionamento
Un diffusore può subire danni se si fa funzionare un amplificatore, indipendentemente dalla sua potenza nominale,
a livelli di ascolto più alti di quelli che può produrre a bassi livelli di distorsione; in genere ciò si verifica quando
si gira il comando del volume oltre la posizione corrispondente alle 12-13 di un orologio immaginario. In tali casi
il funzionamento può causare livelli molto alti e udibili della distorsione che si genera nell'amplificatore, e che
possono aggiungere tonalità stridenti ai suoni che si ascoltano. Al contrario di quanto si ritiene comunemente,
un diffusore ha più probabilità di subire danni se si cerca di ottenere un volume eccessivo con un amplificatore
o ricevitore a bassa potenza anziché con uno ad alta potenza.
Servizio di assistenza
Se dopo aver seguito le istruzioni per il collegamento si hanno problemi, controllare di nuovo tutte le connessioni.
Una volta isolato il problema al diffusore, contattare il rivenditore Polk Audio presso cui lo si è acquistato o il centro
di assistenza Polk Audio al numero 800-377-7655 (lunedì-venerdì, dalle 09.00 alle 18.00, fuso orario EST, solo
negli Stati Uniti) o per e-mail all'indirizzo [email protected]. Fuori degli Stati Uniti chiamare il numero
001-410-358-3600.
Per ulteriori informazioni, tra cui articoli pratici sui sistemi audio, domande frequenti (FAQ) e manuali online,
4
d b : I n c r e d i b l e S o u n d , A f f o r d a b l e P r i c e
Coaxial speaker
Figure 1
BASIC COAXIAL CONNECTION
Figura 1
CONEXIÓN COAXIAL BÁSICA
Figure 1
Amplifier
CONNEXION D’UN HAUT-
PARLEUR COAXIAL
Abbildung 1
EINFACHE KOAXIALVERBINDUNG
Figura 1
CONEXÃO COAXIAL BÁSICA
Figura 1
CONNESSIONE COASSIALE DI BASE
Figure 2
BASS BLOCKER db351 WIRING CONNECTION
Figura 2
BLOQUEADOR DE BAJOS
CONEXIÓN DE CABLEADO DEL db351
Figure 2
Amplifier
«BASS BLOCKER» (bloqueur de graves)
CONNEXION: db351
Abbildung 2
BASS-BLOCKIEREINHEIT
db351-VERKABELUNGSANSCHLUSS
Figura 2
BLOQUEADOR DE GRAVES CONEXÃO do db351
Figura 2
Bass Blocker
FILTRO PASSA ALTO CABLAGGIO DEL db351
Crossover
Figure 3
BASIC COMPONENT CONNECTION
INSTALLING db5251& db6501
Figura 3
CONEXIÓN DE COMPONENTES
BÁSICOS INSTALACIÓN DE
LOS MODELOS db5251 Y db6501
Figure 3
Tweeter
Amplifier
CONNEXION DES COMPOSANTS
INSTALLATION: db5251 / db6501
Abbildung 3
EINFACHE KOMPONENTENVERBINDUNG
INSTALLATION VON db5251& db6501
Figura 3
CONEXÃO BÁSICA DOS COMPONENTES
INSTALAÇÃO DO db5251 e db6501
Figura 3
–
+
CONNESSIONE COMPONENTI DI BASE
INSTALLAZIONE DEL db5251e db6501
Mid-Woofer
5
M o r e I n f o
@
w w w . p o l k a u d i o . c o m / c a r
Figure 4
INSTALLING db351
ROUND MODEL
Figura 4
INSTALACIÓN DEL MODELO
REDONDO db351
Figure 4
INSTALLATION: db351
MODÈLE ROND
Abbildung 4
INSTALLATION VON db691
OVALES MODELL
Figura 4
INSTALAÇÃO DO db351
MODELO REDONDO
Figura 4
INSTALLAZIONE DEL db351
MODELLO CIRCOLARE
Figure 5
INSTALLING db401, db501, db521, db651,
db651s, db5251, db6501 ROUND MODELS
Figura 5
INSTALACIÓN DE LOS MODELOS REDONDOS db401,
db501, db521, db651, db651s, db5251 Y db6501
Figure 5
INSTALLATION: db401, db501, db521, db651,
db651s, db5251, db6501 MODÈLES RONDS
Abbildung 5
INSTALLATION VON db401, db501, db521, db651,
db651s, db5251, db6501 RUNDE MODELLE
Figura 5
INSTALAÇÃO DO db401, db501, db521, db651,
db651s, db5251, db6501 MODELOS REDONDOS
Figura 5
INSTALLAZIONE DEL db401, db501, db521, db651,
db651s, db5251, db6501 MODELLI CIRCOLARI
Figure 6
INSTALLING db461, db461p, db571,
OVAL MODELS
Figura 6
INSTALACIÓN DE LOS MODELOS OVALADOS
db461, db461p Y db571
Figure 6
INSTALLATION: db461, db461p, db571,
MODÈLES OVALES
Abbildung 6
INSTALLATION VON db461, db461p, db571,
OVALE MODELLE
Figura 6
INSTALAÇÃO DOS MODELOS OVAIS
db461, db461p, db571
Figura 6
INSTALLAZIONE DEL db461, db461p, db571,
MODELLI OVALI
6
d b : I n c r e d i b l e S o u n d , A f f o r d a b l e P r i c e
Abbildung 7
Figure 7
INSTALLATION VON db691
OVALES MODELL mit Grill
Figura 7
INSTALLING db691
OVAL MODEL WITH GRILLE
Figura 7
INSTALAÇÃO DO db691
MODELO OVAL com grade
Figura 7
INSTALLAZIONE DEL db691
MODELLO OVALE con griglia
INSTALACIÓN DEL MODELO
OVALADO db691 CON REJILLA
Figure 7
INSTALLATION: db691
MODÈLE OVALE avec grille
Remove bottom mount spacer
ring before installing grille.
Quite el anillo espaciador de la montura
de abajo antes de instalar la rejilla.
Retirez la bague d'espacement conçue
pour montage en dessous du panneau
avant d'installer la grille.
Vor Installation des Grills unteren
Zwischenring entfernen.
Retire o anel espaçador de instalação
inferior antes de instalar a grade.
Rimuovere il distanziale di fissaggio
inferiore prima di installare la griglia.
Abbildung 8
Figure 8
INSTALLATION VON db401, db521, db5251,
RUNDE MODELLE MIT GRILL
Figura 8
INSTALLING db401, db521, db5251,
ROUND MODELS WITH GRILLE
Figura 8
INSTALAÇÃO DO db401, db521, db5251,
MODELOS REDONDOS COM GRADE
Figura 8
INSTALLAZIONE DEL db401, db521, db5251
MODELLI CIRCOLARI CON GRIGLIA
INSTALACIÓN DE LOS MODELOS REDONDOS
db401, db521 Y db5251 CON REJILLA
Figure 8
INSTALLATION: db401, db521, db5251,
MODÈLES RONDS AVEC GRILLE
7
M o r e I n f o
@
w w w . p o l k a u d i o . c o m / c a r
Figure 9
INSTALLING db651s, db651& db6501
WITH GASKET AND GRILLE
Figura 9
INSTALACIÓN DE LOS MODELOS db651s,
db651 Y db6501 CON JUNTA Y REJILLA
Figure 9
INSTALLATION: db651s, db651, db6501
avec JOINT D’ÉTANCHÉITÉ et GRILLE
Abbildung 9
INSTALLATION VON db651s, db651
& db6501 MIT DICHTUNG und Grill
Figura 9
INSTALAÇÃO DO db651s, db651e db6501
COM GAXETA e grade
Figura 9
INSTALLAZIONE DEL db651s, db651 e
db6501 CON GUARNIZIONE e griglia
Abbildung 10
Figure 10
INSTALLATION VON db6501/db651 mit Grill
In manchen Fällen muss ein zusätzlicher Abstandsring-
Adapter verwendet werden.
INSTALLING db6501/db651 WITH GRILLE
Some applications may require using the
additional spacer/adapter bracket.
Figura 10
INSTALACIÓN DE LOS MODELOS db6501
Y db651 CON REJILLA
Figura 10
INSTALAÇÃO DO db6501/db651 com grade
Algumas aplicações podem exigir o uso de outro
espaçador/suporte adaptador.
Algunas aplicaciones pueden requerir el soporte espaci-
ador/adaptador adicional
Figura 10
INSTALLAZIONE DEL db6501/db651 con griglia
In alcuni casi può essere necessario adoperare la staffa
di adattamento/distanziatrice.
Figure 10
INSTALLATION : db6501/db651 avec grille
En certains cas, un support adaptateur-espaceur
pourrait être requis.
SPACER/ADAPTER BRACKET
(for db6501/db651
driver installation only)
ABSTANDSRING-ADAPTER
(nur für die db6501/db651-
Treiber-Installation)
SOPORTE ESPACIADOR/ADAPTADOR
(solamente para la instalación de
los excitadores db6501 y db651)
ESPAÇADOR/SUPORTE ADAPTADOR
(apenas para instalação dos modelos
db6501/db651)
SUPPORT ADAPTATEUR-ESPACEUR
(pour l’installation des transducteurs
db6501/db651 seulement)
STAFFA DI ADATTAMENTO/DISTANZIATRICE
(solo per l’installazione del driver
db6501/db651)
d b : I n c r e d i b l e S o u n d , A f f o r d a b l e P r i c e
8
Figure 11
CROSSOVER MOUNTING
Allow for ventilation clearance.
Figura 11
MONTAJE DE CROSSOVER
Deje espacio para la ventilación
Figure 11
MONTAGE DU SÉPARATEUR
Assurez un dégagement suffisant
pour la ventilation.
Abbildung 11
CROSSOVER-INSTALLATION
Lassen Sie Freiraum zur Lüftung.
Figura 11
MONTAGEM DO CROSSOVER
Deixar espaço para ventilação.
Figura 11
FISSAGGIO DEL CROSSOVER
Lasciare spazio sufficiente per
la circolazione dell’aria.
Abbildung 12
Figure 12
HOCHTÖNERABSCHWÄCHUNGS-SCHALTER
Dieser Schalter mit 3 Positionen (-3 dB, 0 dB, +3 dB )
ermöglicht es Ihnen, den Hochtönerpegel auf den für
Ihr Auto und Ihr System richtigen Wert einzustellen.
Figura 12
TWEETER ATTENUATION SWITCH
A 3-position switch (-3dB, 0dB, +3dB ) allows you
to adjust tweeter level for the tonal balance that's
right for your car and system.
Figura 12
CHAVE DE ATENUAÇÃO DO TWEETER
SELECTOR DE ATENUACIÓN DE TWEETER
El selector de 3 posiciones (-3dB, 0dB, +3dB ) permite ajustar
el nivel de tweeter a fin de producir el balance tonal correcto
para su automóvil y su sistema.
Uma chave de três posições (-3dB, 0dB, +3dB) permite
que o nível de sinal do tweeter seja ajustado para obter
o equilíbrio tonal correto para seu veículo e sistema.
Figura 12
Figure 12
COMANDO DI ATTENUAZIONE TWEETER
Un selettore a tre posizioni (-3 dB, 0 dB, +3 dB ) permette
di regolare il livello del tweeter per ottenere il bilanciamento
dei toni adatto all'autoveicolo e all'impianto.
COMMUTATEUR D'ATTÉNUATION DU TWEETER
Un commutateur à trois positions (-3dB, 0dB, +3dB ) vous
permet d'ajuster le niveau du tweeter selon vos préférences
et l'acoustique de votre voiture.
Abbildung 13
Figure 13
HOCHTÖNERABSCHWÄCHUNGS-DRAHTSCHLAUFE
Schneiden Sie diesen Draht durch, um den Hochtönerpegel
um 3dB zu senken.
TWEETER ATTENUATION WIRE LOOP
Cut this wire to reduce tweeter level 3dB.
Figura 13
BUCLE CONDUCTOR DE ATENUACIÓN DE TWEETER
Corte este conductor para reducir el nivel de
tweeter en 3dB.
Figura 13
LOOP DE ATENUAÇÃO DO TWEETER
Corte este fio para reduzir o nível de sinal do tweeter em 3dB.
Figura 13
ANELLO CONDUTTORE DI ATTENUAZIONE TWEETER
Tagliare questo cavo per ridurre il livello del tweeter di 3dB.
Figure 13
BOUCLE DE FIL POUR ATTÉNUATION DU TWEETER
Coupez ce fil pour réduire le niveau du tweeter de 3dB.
9
M o r e I n f o
@
w w w . p o l k a u d i o . c o m / c a r
ENGLISH
DB6501 & DB5251
Figure 14
Flush Mount
TWEETER MOUNTING
1. Check for proper clearance: The flush mount
kit is 7/8" (22.2mm) deep.
the clamp can be bent outward by inserting
a screwdriver through the holes in the cup
while still mounted.
2. Mark the center of the spot and cut a
2" (50.8mm) diameter hole using a hole
saw, drill bit or razor knife.
6. Connect wires from the tweeter terminals of the
Crossover to the tweeter itself using the faston
connectors. Connect the red wire from the (+)
terminal of the Crossover tweeter output to
the red (+) wire from the tweeter.
3. Assemble the cup, clamp and machine
screw loosely as shown.
4. Route wires through the round opening in the
bottom of the cup.
7. Mount the tweeter by snapping it into the
mounting cup.
5. Press the assembly into the 2" (50.8mm) diameter
hole until the clamp edge is below the mounting
surface, then tighten the screw. The legs of
ESPAÑOL
Figura 14
Montaje al ras
5. Presione la unidad para que entre en el agujero de
50.8 mm (2 plg.) hasta que el borde de la abrazadera
quede debajo de la superficie de montaje, luego
apriete los tornillos. Las patas de la abrazadera se
pueden doblar hacia afuera insertando un destornil-
lador a través de los agujeros de la tapa montada.
MONTAJE DEL TWEETER
1. Verifique que haya suficiente espacio: el juego
de montaje al ras tiene 22.2 mm (7/8 de plg.)
de profundidad.
2. Marque el punto central del área donde va a quedar
el tweeter y haga un agujero de 50.8 mm (2 plg.)
con una sierra caladora, una broca perforadora
o un cuchillo utilitario.
6. Conecte cables desde las terminales de tweeter
del crossover hasta el propio tweeter con conec-
tores faston. Conecte el cable rojo de la terminal
(+) de la salida de tweeter del crossover al cable
rojo (+) del tweeter.
3. Arme la copa, la abrazadera y los tornillos para
metales sin apretarlos, tal como se muestra.
7. Monte el tweeter haciéndolo encajar a presión
en la copa de montaje.
4. Encamine los cables a través de la abertura
redonda que hay en la base de la copa.
FRANÇAIS
Figure 14
MONTAGE DU TWEETER—ENCASTRÉ
1. Assurez un dégagement adéquat—le kit de montage
encastré a une profondeur de 7/8" (22,2 mm).
5. Insérez l’ensemble dans le trou de 2 po jusqu'à ce
que la bordure du crampon pénètre sous la surface
de montage puis resserrez la vis. Les pattes du
crampon peuvent être repliées vers l’extérieur en
insérant un tournevis dans les trous de la coupelle
déjà en place.
2. Marquez le centre de l’endroit d’installation choisi
et faites un trou de 2 po (50,8 mm) de diamètre à
l’aide d’une scie-cloche, d'un foret ou d'un couteau
tout usage.
6. Connectez les fils des bornes «tweeter» du sépara
teur aux fils des tweeters à l’aide des connecteurs
rapides. Assurez-vous de connecter le fil rouge
fil (+) du tweeter à la borne (+) de la sortie
«tweeter» du séparateur.
3. Assemblez la coupelle, le crampon et la vis tel
qu’indiqué—sans trop serrer.
4. Passez les fils à travers le trou rond à la base
de la coupelle.
7. Montez le tweeter en l’enclenchant dans la coupelle.
d b : I n c r e d i b l e S o u n d , A f f o r d a b l e P r i c e
10
DEUTSCH
Abbildung 14
Bündige Montage
HOCHTÖNER-MONTAGE
1. Prüfen Sie, ob genug Freiraum da ist: Der
Kit zurbündigen Montage ist 22,2 mm tief.
50,8 mm Durchmesser, bis die Kante der Klammer
sich unter der Montageebene befindet, und drehen
Sie dann die Schraube fest. Die Arme der Klammer
können nach außen gebogen werden, indem Sie
einen Schraubendreher durch die Löcher im Becher
einführen, während dieser noch montiertist.
2. Markieren Sie den Mittelpunkt und schneiden
Sie mit einer Lochsäge, einem Bohrer oder einem
Teppichmesser ein Loch mit 50,8 mm Durchmesser.
6. Verbinden Sie die Drähte von den
Hochtöneranschlüssen am Crossover mit dem
Hochtöner selbst unter Verwendung der Faston-
Anschlüsse. Verbinden Sie den roten Draht vom
(+) Anschluss des Crossover-Hochtönerausgangs
mit dem roten (+) Draht am Hochtöner.
3. Kombinieren Sie den Becher, die Klammer
und die Flachkopfschraube lose, wie in der
Abbildung gezeigt.
4. Führen Sie die Kabel durch die runde Öffnung
unten am Becher.
7. Befestigen Sie den Hochtöner, indem Sie ihn
in den Montagebecher einrasten lassen.
5. Drücken Sie die Baugruppe in das Loch mit
PORTUGUÊS
Figura 14
Instalação alinhada com a superfície
INSTALAÇÃO DO TWEETER
1. Verifique se há espaço adequado: O kit de
montagem embutida tem 22,2 mm (7/8 pol.)
de profundidade.
5. Pressione o conjunto no orifício de 50,8 mm
(2 pol.) de diâmetro até que a borda da presilha
esteja abaixo da superfície de montagem e, em
seguida, aperte o parafuso. Para dobrar as extremi-
dades da presilha para fora, basta inserir uma chave
de fenda através dos orifícios na base.
2. Marque o centro do local de instalação e corte um
orifício com diâmetro de 50,8 mm (2 pol.) usando
uma serra copo, uma broca ou um estilete.
6. Conecte os cabos dos terminais do tweeter do
crossover ao próprio tweeter usando os conectores
faston. Conecte o cabo vermelho do terminal (+) da
saída do tweeter do crossover no cabo vermelho
(+) do tweeter.
3. Monte a base, a presilha e os parafusos sem
apertar, como ilustrado.
4. Passe os cabos através da abertura redonda
situada na parte inferior da base.
7. Monte o tweeter encaixando-o na base de motagem.
ITALIANO
Figura 14
Fissaggio a filo
5. Inserire il gruppo nel foro praticato finché il bordo
della piastra di fissaggio non è sotto la superficie
di fissaggio e poi serrare la vite. È possibile
piegare verso l'esterno le alette della piastra
di fissaggio inserendo un cacciavite nei fori
della cassa dopo averla collocata.
FISSAGGIO DEL TWEETER
1. Verificare che si possa assicurare lo spazio giusto:
il kit di fissaggio a filo ha una profondità (d) di
22,2 mm.
2. Contrassegnare il centro del punto di installazione
e praticare un foro di diametro pari a 50,8 mm (2")
mediante una sega a tazza, una punta di trapano
o un rasoio.
6. Collegare i cavi dai terminali del crossover per
il tweeter a quest'ultimo mediante i connettori
Faston, collegando il cavo rosso dal terminale
(+) dell'apposita uscita del crossover al cavo
rosso (+) del tweeter.
3. Montare la cassa, la piastra di fissaggio e la vite
autofilettante senza serrare il complessivo, come
illustrato.
7. Inserire il tweeter nella cassa accertandosi
che si blocchi con uno scatto.
4. Infilare i cavi nell’apertura circolare sulla parte
inferiore della cassa.
M o r e I n f o
@
w w w . p o l k a u d i o . c o m / c a r 11
ENGLISH
DB6501 & DB5251
Figure 15
Surface Mount
TWEETER MOUNTING
1. Using the base of the surface mount cup as
a template, mark the screw hole and drill them
using a 1/8" (3mm) drill bit. Drill a second hole
(for the speaker wire) using a 3/16" (5mm) drill bit.
4. Connect wires from the tweeter terminals of
the Crossover to the tweeter wires using faston
connectors. Be sure to connect the red wire
strand from the tweeter to the (+) terminal
of the crossover tweeter output.
2. Screw surface mount cup to the panel.
3. Push the tweeter wires through the open area at
the bottom of the cup and through the 3/16" (5mm)
hole in the panel.
5. Mount the tweeter by snapping it into the
mounting cup.
ESPAÑOL
Figura 15
Montaje en superficie
MONTAJE DEL TWEETER
1.Usando la base de la copa de montaje en superficie
como plantilla, marque el punto en que va a
ir el agujero para el tornillo y haga el agujero con
una broca perforadora de 3 mm (1/8 de plg). Haga
un segundo agujero (para el cable del altavoz) con
una broca perforadora de 5 mm (3/16 de plg).
4. Conecte cables desde las terminales de tweeter
del crossover hasta los cables del tweeter con
conectores faston. Asegúrese de conectar el cable
rojo del tweeter a la terminal (+) de la salida de
tweeter del crossover.
5. Monte el tweeter haciéndolo encajar a presión en
la copa de montaje.
2.Atornille la copa de montaje en superficie al
panel interior.
3.Empuje los cables del tweeter a través del área
abierta en la base de la copa y a través del agujero
de 5 mm (3/16 de plg.) que hay en el panel.
FRANÇAIS
Figure 15
MONTAGE DU TWEETER—EN SURFACE
1. Utilisant la base de la coupelle comme gabarit,
marquez les trous de vis puis percez le panneau
à l’aide d'une mèche de 1/8" (3 mm). Percez un
deuxième trou (pour le fil de haut-parleur)
utilisant une mèche de 3/16" (5 mm).
4. Conecte cables desde las terminales de tweeter del
crossover hasta los cables del tweeter con conectores
faston. Asegúrese de conectar el cable rojo del
tweeter a la terminal (+) de la salida de tweeter
del crossover.
2. Vissez la coupelle à la surface du panneau.
5.Monte el tweeter haciéndolo encajar a presión en
la copa de montaje.
3. Passez le fils du tweeter à travers le trou à la base
de la coupelle et à travers le trou de 3/16" (5 mm)
déjà percé dans le panneau.
12 d b : I n c r e d i b l e S o u n d , A f f o r d a b l e P r i c e
DEUTSCH
Abbildung 15
Oberflächenmontage
HOCHTÖNER-MONTAGE
1. Verwenden Sie die Unterseite des
Oberflächenmontagebechers als Schablone und
markieren Sie damit das Schraubenloch, das Sie
mit einem 3-mm-Bohrer bohren. Bohren Sie ein
zweites Loch (für das Lautsprecherkabel) mit
einem 5-mm-Bohrer.
4. Verbinden Sie die Drähte von den
Hochtöneranschlüssen am Crossover mit den
Hochtönerdrähten unter Verwendung der Faston-
Anschlüsse. Stellen Sie sicher, dass die rote
Leitungsfaser vom Hochtöner an den (+) Anschluss
des Crossover-Hochtöner-Ausgangs
angeschlossen wird.
2. Schrauben Sie den Oberflächenmontagebecher
an die Platte.
5. Befestigen Sie den Hochtöner, indem Sie ihn
in den Montagebecher einrasten lassen.
3. Schieben Sie die Hochtönerdrähte durch die
Öff nung an der Unterseite des Bechers und
das 5-mm-Loch in der Platte.
PORTUGUÊS
Figura 15
Instalação na superfície
INSTALAÇÃO DO TWEETER
1. Use a base de montagem como um modelo para
marcar o orifício do parafuso e perfure-o usando
uma broca de 3 mm (1/8 pol.). Perfure um segundo
orifício (para o cabo da caixa acústica) usando uma
broca de 5 mm (3/16 pol.).
4. Conecte os cabos dos terminais do tweeter
do crossover aos cabos do tweeter usando
os conectores faston. Conecte a extremidade
do cabo vermelho do tweeter ao terminal (+)
da saída do tweeter do crossover.
2. Afixe com os parafusos a base de montagem em
superfície ao painel.
5. Monte o tweeter encaixando-o na base de
montagem.
3. Passe os cabos do tweeter através da área aberta
no fundo da base e através do orifício de 5 mm
(3/16 pol.) no painel.
ITALIANO
Figura 15
Fissaggio superficiale
FISSAGGIO DEL TWEETER
1. Utilizzando la base della cassa come dima,
contrassegnare la posizione del foro per la vite
e praticare il foro con una punta da trapano di
3 mm (1/8"), quindi praticare un secondo foro
(per il cavo del diffusore) con una punta da
trapano di 5 mm (3/16").
4. Collegare i cavi dai terminali del crossover per il
tweeter ai cavi di quest’ultimo mediante connet-
tori Faston, collegando il cavo rosso dal tweeter
all’apposito terminale (+) del crossover.
5. Inserire il tweeter nella cassa accertandosi
che si blocchi con uno scatto.
2. Avvitare la cassa sul pannello.
3. Infilare i cavi del tweeter nell’apertura sul
fondo della cassa e nel foro da 5 mm praticato
nel pannello.
M o r e I n f o
@
w w w . p o l k a u d i o . c o m / c a r 13
ENGLISH
db Series Full Range/Component Systems Specifications
db351
3 1/2"
coaxial
db401
4"
coaxial
db461
4" x 6"
coaxial
db461p
4" x 6"
plate
db501
5"
coaxial
db521
5 1/4"
coaxial
Type
................................................................................................................................................................................................................
Driver
3 1/2"
4"
4" x 6"
4"
5"
5 1/4"
complement
(8.89cm)
mid/woofer
(10.2cm)
mid/woofer
(10cm x 15cm)
mid/woofer
(10.2cm)
mid/woofer
(12.7cm)
mid/woofer
(13.0cm)
mid/woofer
................................................................................................................................................................................................................
Tweeter
complement
1/2" (12mm)
soft dome
tweeter
3/4" (19mm)
soft dome
tweeter
3/4" (19mm)
soft dome
tweeter
3/4" (19mm)
soft dome
tweeter
3/4" (19mm)
soft dome
tweeter
3/4" (19mm)
soft dome
tweeter
................................................................................................................................................................................................................
Mounting
dimensions
3 1/8"
(79.36mm)
4"
6" x 4"
(152.4mm x
101.6mm)
6" x 4"
(152.4mm x
101.6mm)
4"
4 11/16"
(119mm)
(101.6mm)
(101.6mm)
................................................................................................................................................................................................................
Mounting
depth (top)
1 1/2"
(38.1mm)
1 13/16"
(46.0mm)
1 15/16"
(49.2mm)
1 13/16"
(46.04mm)
1 13/16"
(46.0mm)
2 5/16"
(58.7mm)
................................................................................................................................................................................................................
Mounting
1 11/16"
1 15/16"
2"
2"
1 15/16"
2 7/16"
depth (bottom)
(42.86mm)
(49.21mm)
(50.8mm)
(50.8mm)
(49.21mm)
(61.9mm)
................................................................................................................................................................................................................
Peak
105w
135w
120w
150w
135w
135w
Power handling
................................................................................................................................................................................................................
Continuous
35w
45w
40w
50w
45w
45w
Power handling
................................................................................................................................................................................................................
Nominal
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
Impedance
................................................................................................................................................................................................................
Frequency
response
90-22kHz
85-22kHz
75-22kHz
71-22kHz
65-22kHz
60-22kHz
................................................................................................................................................................................................................
Grille height
n/a
3/4"
n/a
n/a
n/a
1"
(6.35mm)
(25.4mm)
................................................................................................................................................................................................................
Sensitivity
91dB
91dB
91dB
91dB
93dB
93dB
................................................................................................................................................................................................................
14 d b : I n c r e d i b l e S o u n d , A f f o r d a b l e P r i c e
db Series Full Range/Component Systems Specifications
db571
5" x 7"
coaxial
db651
6 1/2"
coaxial
db651s
6 1/2"
slim mount
coaxial
db691
6" x 9"
three way
db5251
5 1/4"
component
system
db6501
6 1/2"
component
system
db1001
1"
tweeter
................................................................................................................................................................................................................
5" x 7”
6 1/2"
6 1/2"
6" x 9"
5 1/4"
6 1/2"
n/a
(12.7cm x
17.8cm)
(16.0cm)
mid/woofer
(16.0cm)
mid/woofer
(15cm x 22.9cm)
mid/woofer
(13.0cm)
mid/woofer
(16.0cm)
mid/woofer
mid/woofer
mid/woofer
................................................................................................................................................................................................................
3/4" (19mm)
soft dome
tweeter
3/4" (19mm)
soft dome
tweeter
3/4" (19mm)
soft dome
tweeter
1" (25.4mm)
soft dome
tweeter
1" (25.4mm)
soft dome
tweeter
1" (25.4mm)
soft dome
tweeter
1" (25.4mm)
soft dome
tweeter
3/4" (19mm)
soft dome tweeter
................................................................................................................................................................................................................
7 1/8" x 4 15/16"
(181mm x
125.4mm)
5"
5"
8 1/2" x 5 3/4"
(215.9mm x
146mm)
4 11/16"
(119mm)
5"
2 1/16"
(52.39mm)
mounting cup
(127mm)
(127mm)
(127mm)
................................................................................................................................................................................................................
2 3/16"
2"
2"
3 3/16"
2 5/16"
2"
1 3/16"
(55.6mm)
(50.8mm)
(50.8mm)
(81.0mm)
(58.7mm)
(50.8mm)
(30.2mm)
................................................................................................................................................................................................................
2 5/8"
2 5/16"
2 5/16"
3 3/4"
2 7/16"
2 5/16"
1 1/32"
(66.7mm)
(58.74mm)
(58.7mm)
(95.2mm)
(61.9mm)
(58.7mm)
(26.2mm)
................................................................................................................................................................................................................
180w
180w
165w
300w
250w
300w
180w
................................................................................................................................................................................................................
60w 60w 55w 100w 100w 100w 60w
................................................................................................................................................................................................................
4 Ω 4 Ω 4 Ω 4 Ω 4 Ω 4 Ω 4 Ω
................................................................................................................................................................................................................
52-22kHz 35-22kHz 50-22kHz 35-22kHz 53-23kHz 35-23kHz 4kHz-23kHz
................................................................................................................................................................................................................
n/a
1 1/8"
1 1/8"
1 1/4"
1"
1 1/8"
n/a
(28.58mm)
(28.58mm)
(31.75mm)
(25.4mm)
(28.58mm)
................................................................................................................................................................................................................
93dB
92dB
92dB
93dB
93dB
92dB
92dB
......................................................................................................................................................................................
15
M o r e I n f o
@
w w w . p o l k a u d i o . c o m / c a r
ESPAÑOL
Especificaciones de los modelos de la serie de gama completa de frecuencias
db351
3 1/2"
coaxial
db401
4"
coaxial
db461
4" x 6"
coaxial
db461p
4" x 6"
placa
db501
5"
coaxial
db521
5 1/4"
coaxial
Tipo
................................................................................................................................................................................................................
Dotación
3 1/2"
4"
4" x 6"
4"
5"
5 1/4"
de excitadores
(8.89cm)
woofer y
frecuencias
medias
(10.2cm)
woofer y
frecuencias
medias
(10cm x 15cm)
woofer y
frecuencias
medias
(10.2cm)
woofer y
frecuencias
medias
(12.7cm)
woofer y
frecuencias
medias
(13.0cm)
woofer y
frecuencias
medias
................................................................................................................................................................................................................
Dotación
de tweeters
1/2" (12mm)
tweeter de
3/4" (19mm)
tweeter de
3/4" (19mm)
tweeter de
3/4" (19mm)
tweeter de
3/4" (19mm)
tweeter de
3/4" (19mm)
tweeter de
domo blando
domo blando
domo blando
domo blando
domo blando
domo blando
................................................................................................................................................................................................................
Dimensiones
de montaje
3 1/8"
(79.36mm)
4"
6" x 4"
(152.4mm x
101.6mm)
6" x 4"
(152.4mm x
101.6mm)
4"
4 11/16"
(119mm)
(101.6mm)
(101.6mm)
................................................................................................................................................................................................................
Profundidad de
montaje (arriba)
1 1/2"
(38.1mm)
1 13/16"
(46.0mm)
1 15/16"
(49.2mm)
1 13/16"
(46.04mm)
1 13/16"
(46.0mm)
2 5/16"
(58.7mm)
................................................................................................................................................................................................................
Profundidad de
montaje (abajo)
1 11/16"
(42.86mm)
1 15/16"
(49.21mm)
2"
2"
1 15/16"
(49.21mm)
2 7/16"
(61.9mm)
(50.8mm)
(50.8mm)
................................................................................................................................................................................................................
Administración de 105w
potencia máxima
135w
120w
150w
135w
135w
................................................................................................................................................................................................................
Administración de 35w
potencia continua
45w
40w
50w
45w
45w
................................................................................................................................................................................................................
Impedancia
nominal
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
................................................................................................................................................................................................................
Respuesta de
frecuencias
90-22kHz
85-22kHz
75-22kHz
71-22kHz
65-22kHz
60-22kHz
................................................................................................................................................................................................................
Altura de
la rejilla
n/a
3/4"
(6.35mm)
n/a
n/a
n/a
1"
(25.4mm)
................................................................................................................................................................................................................
Sensibilidad
91dB
91dB
91dB
91dB
93dB
93dB
................................................................................................................................................................................................................
16
d b : I n c r e d i b l e S o u n d , A f f o r d a b l e P r i c e
Especificaciones de sistemas de componentes de los modelos de la serie db
db571
5" x 7"
db651
6 1/2"
coaxial
db651s
6 1/2"
coaxial de
montaje delgado
db691
6" x 9"
tres canales
db5251
5 1/4"
sistema de
componentes
db6501
6 1/2"
sistema de
componentes
db1001
1"
tweeter
................................................................................................................................................................................................................
5" x 7”
6 1/2"
6 1/2"
6" x 9"
5 1/4"
6 1/2"
n/a
(12.7cm x 17.8cm) (16.0cm)
(16.0cm)
woofer y
frecuencias
medias
(15cm x 22.9cm)
woofer y
frecuencias
medias
(13.0cm)
woofer y
frecuencias
medias
(16.0cm)
woofer y
frecuencias
medias
woofer y
frecuencias
medias
woofer y
frecuencias
medias
woofer y
frecuencias
medias
................................................................................................................................................................................................................
3/4" (19mm)
tweeter de
domo blando
3/4" (19mm)
tweeter de
domo blando
3/4" (19mm)
tweeter de
domo blando
1" (25.4mm)
tweeter de
domo blando
3/4" (19mm)
tweeter de
1" (25.4mm)
tweeter de
domo blando
1" (25.4mm)
tweeter de
domo blando
1" (25.4mm)
tweeter de
domo blando
domo blando
................................................................................................................................................................................................................
7 1/8" x 4 15/16"
(181mm x
125.4mm)
5"
5"
8 1/2" x 5 3/4"
(215.9mm x
146mm)
4 11/16"
(119mm)
5"
2 1/16"
(127mm)
(127mm)
(127mm)
(52.39mm)
copa de
montaje
................................................................................................................................................................................................................
2 3/16"
2"
2"
3 3/16"
2 5/16"
2"
1 3/16"
(55.6mm)
(50.8mm)
(50.8mm)
(81.0mm)
(58.7mm)
(50.8mm)
(30.2mm)
................................................................................................................................................................................................................
2 5/8"
2 5/16"
2 5/16"
3 3/4"
2 7/16"
2 5/16"
1 1/32"
(66.7mm)
(58.74mm)
(58.7mm)
(95.2mm)
(61.9mm)
(58.7mm)
(26.2mm)
................................................................................................................................................................................................................
180w
180w
165w
300w
250w
300w
180w
................................................................................................................................................................................................................
60w 60w 55w 100w 100w 100w 60w
................................................................................................................................................................................................................
4 Ω 4 Ω 4 Ω 4 Ω 4 Ω 4 Ω 4 Ω
................................................................................................................................................................................................................
52-22kHz 35-22kHz 50-22kHz 35-22kHz 53-23kHz 35-23kHz 4kHz-23kHz
................................................................................................................................................................................................................
n/a
1 1/8"
1 1/8"
1 1/4"
1"
1 1/8"
n/a
(28.58mm)
(28.58mm)
(31.75mm)
(25.4mm)
(28.58mm)
................................................................................................................................................................................................................
93dB
92dB
92dB
93dB
93dB
92dB
92dB
................................................................................................................................................................................................................
17
M o r e I n f o
@
w w w . p o l k a u d i o . c o m / c a r
FRANÇAIS
Série db à gamme intégrale—Fiche technique
db351
3 1/2"
coaxial
db401
4"
coaxial
db461
4" x 6"
coaxial
db461p
4" x 6"
plateau
db501
5"
coaxial
db521
5 1/4"
coaxial
Type
................................................................................................................................................................................................................
Transducteurs
3 1/2"
4"
4" x 6"
4"
5"
5 1/4"
(8.89cm)
méd/woofer
(10.2cm)
méd/woofer
(10cm x 15cm)
méd/woofer
(10.2cm)
méd/woofer
(12.7cm)
méd/woofer
(13.0cm)
méd/woofer
................................................................................................................................................................................................................
Tweeter
complement
1/2" (12mm)
tweeter à
3/4" (19mm)
tweeter à
3/4" (19mm)
tweeter à
3/4" (19mm)
tweeter à
3/4" (19mm)
tweeter à
3/4" (19mm)
tweeter à
dôme souple
dôme souple
dôme souple
dôme souple
dôme souple
dôme souple
................................................................................................................................................................................................................
Dimensions
de montage
3 1/8"
(79.36mm)
4"
6" x 4"
(152.4mm x
101.6mm)
6" x 4"
(152.4mm x
101.6mm)
4"
4 11/16"
(119mm)
(101.6mm)
(101.6mm)
................................................................................................................................................................................................................
Profondeur de
1 1/2"
1 13/16"
(46.0mm)
1 15/16"
(49.2mm)
1 13/16"
(46.04mm)
1 13/16"
(46.0mm)
2 5/16"
(58.7mm)
montage (dessus) (38.1mm)
................................................................................................................................................................................................................
Profondeur de
1 11/16"
1 15/16"
2"
2"
1 15/16"
2 7/16"
montage (dessous) (42.86mm)
(49.21mm)
(50.8mm)
(50.8mm)
(49.21mm)
(61.9mm)
................................................................................................................................................................................................................
Capacité de
105w
135w
120w
150w
135w
135w
puissance (crête)
................................................................................................................................................................................................................
Capacité de
35w
45w
40w
50w
45w
45w
puissance (continue)
................................................................................................................................................................................................................
Impédance
nominale
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
................................................................................................................................................................................................................
Réponse en
fréquences
90-22kHz
85-22kHz
75-22kHz
71-22kHz
65-22kHz
60-22kHz
................................................................................................................................................................................................................
Hauteur de
la grille
n/a
3/4"
(6.35mm)
n/a
n/a
n/a
1"
(25.4mm)
................................................................................................................................................................................................................
Sensibilité
91dB
91dB
91dB
91dB
93dB
93dB
................................................................................................................................................................................................................
18
d b : I n c r e d i b l e S o u n d , A f f o r d a b l e P r i c e
Systèmes-composants de la Série db—Fiche technique
db571
5" x 7"
coaxial
db651
6 1/2"
coaxial
db651s
6 1/2"
coaxial à
profil ultra-mince
db691
6" x 9"
3 voies
db5251
5 1/4"
système-
composants
db6501
6 1/2"
système-
composants
db1001
1"
tweeter
................................................................................................................................................................................................................
5" x 7”
6 1/2"
6 1/2"
6" x 9"
5 1/4"
6 1/2"
n/a
(12.7cm x
17.8cm)
(16.0cm)
méd/woofer
(16.0cm)
méd/woofer
(15cm x 22.9cm)
méd/woofer
(13.0cm)
méd/woofer
(16.0cm)
méd/woofer
méd/woofer
méd/woofer
................................................................................................................................................................................................................
3/4" (19mm)
tweeter à
3/4" (19mm)
tweeter à
3/4" (19mm)
tweeter à
1" (25.4mm)
tweeter à
1" (25.4mm)
tweeter à
1" (25.4mm)
tweeter à
1" (25.4mm)
tweeter à
dôme souple
dôme souple
dôme souple
dôme souple
3/4" (19mm)
tweeter à
dôme souple
dôme souple
dôme souple
dôme souple
................................................................................................................................................................................................................
7 1/8" x 4 15/16"
(181mm x
125.4mm)
5"
5"
8 1/2" x 5 3/4"
(215.9mm x
146mm)
4 11/16"
(119mm)
5"
2 1/16"
(52.39mm)
coupelle
(127mm)
(127mm)
(127mm)
de montage
................................................................................................................................................................................................................
2 3/16"
2"
2"
3 3/16"
2 5/16"
2"
1 3/16"
(55.6mm)
(50.8mm)
(50.8mm)
(81.0mm)
(58.7mm)
(50.8mm)
(30.2mm)
................................................................................................................................................................................................................
2 5/8"
2 5/16"
2 5/16"
3 3/4"
2 7/16"
2 5/16"
1 1/32"
(66.7mm)
(58.74mm)
(58.7mm)
(95.2mm)
(61.9mm)
(58.7mm)
(26.2mm)
................................................................................................................................................................................................................
180w
180w
165w
300w
250w
300w
180w
................................................................................................................................................................................................................
60w 60w 55w 100w 100w 100w 60w
................................................................................................................................................................................................................
4 Ω 4 Ω 4 Ω 4 Ω 4 Ω 4 Ω 4 Ω
................................................................................................................................................................................................................
52-22kHz 35-22kHz 50-22kHz 35-22kHz 53-23kHz 35-23kHz 4kHz-23kHz
................................................................................................................................................................................................................
n/a
1 1/8"
1 1/8"
1 1/4"
1"
1 1/8"
n/a
(28.58mm)
(28.58mm)
(31.75mm)
(25.4mm)
(28.58mm)
................................................................................................................................................................................................................
93dB
92dB
92dB
93dB
93dB
92dB
92dB
......................................................................................................................................................................................
19
M o r e I n f o
@
w w w . p o l k a u d i o . c o m / c a r
DEUTSCH
db-Serie: Vollbereichs-Spezifikationen
db351
3 1/2"
koaxial
db401
4"
koaxial
db461
4" x 6"
koaxial
db461p
4" x 6"
platte
db501
5"
koaxial
db521
5 1/4"
koaxial
Typ
................................................................................................................................................................................................................
Treiberbaugruppe 3 1/2"
(8.89cm)
mitteltieftöner
4"
4" x 6"
(10cm x 15cm)
mitteltieftöner
4"
5"
5 1/4"
(13.0cm)
(10.2cm)
mitteltieftöner
(10.2cm)
mitteltieftöner
(12.7cm)
mitteltieftöner mitteltieftöner
................................................................................................................................................................................................................
Hochtöner-
baugruppe
1/2" (12mm)
weichkalotten-
hochtöner
3/4" (19mm)
weichkalotten-
hochtöner
3/4" (19mm)
weichkalotten-
hochtöner
3/4" (19mm)
weichkalotten-
hochtöner
3/4" (19mm)
weichkalotten- weichkalotten-
hochtöner hochtöner
3/4" (19mm)
................................................................................................................................................................................................................
Montageab-
messungen
3 1/8"
(79.36mm)
4"
6" x 4"
(152.4mm x
101.6mm)
6" x 4"
(152.4mm x
101.6mm)
4"
4 11/16"
(119mm)
(101.6mm)
(101.6mm)
................................................................................................................................................................................................................
Befestigung-
stiefe (oben)
1 1/2"
(38.1mm)
1 13/16"
(46.0mm)
1 15/16"
(49.2mm)
1 13/16"
(46.04mm)
1 13/16"
(46.0mm)
2 5/16"
(58.7mm)
................................................................................................................................................................................................................
Befestigung-
stiefe (unten)
1 11/16"
(42.86mm)
1 15/16"
(49.21mm)
2"
2"
1 15/16"
(49.21mm)
2 7/16"
(61.9mm)
(50.8mm)
(50.8mm)
................................................................................................................................................................................................................
Spitzenbelast-
barkeit
105w
135w
120w
150w
135w
135w
................................................................................................................................................................................................................
Dauerbelast-
barkeit
35w
45w
40w
50w
45w
45w
................................................................................................................................................................................................................
Nennimpedanz
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
................................................................................................................................................................................................................
Frequenzgang 90-22kHz 85-22kHz 75-22kHz 71-22kHz 65-22kHz 60-22kHz
................................................................................................................................................................................................................
Grillhöhe
n/a
3/4"
n/a
n/a
n/a
1"
(6.35mm)
(25.4mm)
................................................................................................................................................................................................................
Empfindlichkeit
91dB
91dB
91dB
91dB
93dB
93dB
................................................................................................................................................................................................................
d b : I n c r e d i b l e S o u n d , A f f o r d a b l e P r i c e
20
db-Serie: Komponentensystem-Spezifikationen
db571
5" x 7"
koaxial
db651
6 1/2"
koaxial
db651s
6 1/2"
platzsparende
koaxialmontage
db691
6" x 9"
dreiweg
db5251
5 1/4"
komponenten-
system
db6501
6 1/2"
komponenten- tweeter
system
db1001
1"
................................................................................................................................................................................................................
5" x 7”
6 1/2"
6 1/2"
6" x 9"
5 1/4"
6 1/2"
n/a
(12.7cm x
17.8cm)
(16.0cm)
mitteltieftöner
(16.0cm)
mitteltieftöner
(15cm x 22.9cm)
mitteltieftöner
(13.0cm)
mitteltieftöner
(16.0cm)
mitteltieftöner
mitteltieftöner
mitteltieftöner
................................................................................................................................................................................................................
3/4" (19mm)
weichkalotten-
hochtöner
3/4" (19mm)
weichkalotten-
hochtöner
3/4" (19mm)
weichkalotten-
hochtöner
1" (25.4mm)
weichkalotten-
hochtöner
1" (25.4mm)
weichkalotten-
hochtöner
1" (25.4mm)
weichkalotten- weichkalotten-
hochtöner hochtöner
1" (25.4mm)
3/4" (19mm)
weichkalotten-
hochtöner
................................................................................................................................................................................................................
7 1/8" x 4 15/16"
(181mm x
125.4mm)
5"
5"
8 1/2" x 5 3/4"
(215.9mm x
146mm)
4 11/16"
(119mm)
5"
2 1/16"
(127mm)
(127mm)
(127mm)
(52.39mm)
montage-
becher
................................................................................................................................................................................................................
2 3/16"
2"
2"
3 3/16"
2 5/16"
2"
1 3/16"
(55.6mm)
(50.8mm)
(50.8mm)
(81.0mm)
(58.7mm)
(50.8mm)
(30.2mm)
................................................................................................................................................................................................................
2 5/8"
2 5/16"
2 5/16"
3 3/4"
2 7/16"
2 5/16"
1 1/32"
(66.7mm)
(58.74mm)
(58.7mm)
(95.2mm)
(61.9mm)
(58.7mm)
(26.2mm)
................................................................................................................................................................................................................
180w
180w
165w
300w
250w
300w
180w
................................................................................................................................................................................................................
60w 60w 55w 100w 100w 100w 60w
................................................................................................................................................................................................................
4 Ω 4 Ω 4 Ω 4 Ω 4 Ω 4 Ω 4 Ω
................................................................................................................................................................................................................
52-22kHz 35-22kHz 50-22kHz 35-22kHz 53-23kHz 35-23kHz 4kHz-23kHz
................................................................................................................................................................................................................
n/a
1 1/8"
1 1/8"
1 1/4"
1"
1 1/8"
n/a
(28.58mm)
(28.58mm)
(31.75mm)
(25.4mm)
(28.58mm)
................................................................................................................................................................................................................
93dB
92dB
92dB
93dB
93dB
92dB
92dB
......................................................................................................................................................................................
M o r e I n f o
@
w w w . p o l k a u d i o . c o m / c a r
21
PORTUGUÊS
Especificações da série db
db351
3 1/2"
coaxial
db401
4"
coaxial
db461
4" x 6"
coaxial
db461p
4" x 6"
placa
db501
5"
coaxial
db521
5 1/4"
coaxial
Tipo
................................................................................................................................................................................................................
Driver
3 1/2"
4"
4" x 6"
4"
5"
5 1/4"
complement
(8.89cm)
woofer médio
(10.2cm)
woofer médio
(10cm x 15cm)
woofer médio
(10.2cm)
woofer médio
(12.7cm)
woofer médio
(13.0cm)
woofer médio
................................................................................................................................................................................................................
Tweeter
complement
1/2" (12mm)
tweeter de
3/4" (19mm)
tweeter de
3/4" (19mm)
tweeter de
3/4" (19mm)
tweeter de
3/4" (19mm)
tweeter de
3/4" (19mm)
tweeter de
cúpula macia
cúpula macia
cúpula macia
cúpula macia
cúpula macia
cúpula macia
................................................................................................................................................................................................................
Dimensões
para instalação
3 1/8"
(79.36mm)
4"
6" x 4"
(152.4mm x
101.6mm)
6" x 4"
(152.4mm x
101.6mm)
4"
4 11/16"
(119mm)
(101.6mm)
(101.6mm)
................................................................................................................................................................................................................
Profundidade de
instalação
1 1/2"
(38.1mm)
1 13/16"
(46.0mm)
1 15/16"
(49.2mm)
1 13/16"
(46.04mm)
1 13/16"
(46.0mm)
2 5/16"
(58.7mm)
(superior)
................................................................................................................................................................................................................
Profundidade de
instalação
1 11/16"
(42.86mm)
1 15/16"
(49.21mm)
2"
2"
1 15/16"
(49.21mm)
2 7/16"
(61.9mm)
(50.8mm)
(50.8mm)
(inferior)
................................................................................................................................................................................................................
Capacidade de
105w
135w
120w
150w
135w
135w
processamento de
pico de potência
................................................................................................................................................................................................................
Capacidade de
processamento
contínuo
35w
45w
40w
50w
45w
45w
................................................................................................................................................................................................................
Impedância
nominal
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
................................................................................................................................................................................................................
Resposta
de freq.
90-22kHz
85-22kHz
75-22kHz
71-22kHz
65-22kHz
60-22kHz
................................................................................................................................................................................................................
Altura
n/a
3/4"
n/a
n/a
n/a
1"
da grade
(6.35mm)
(25.4mm)
................................................................................................................................................................................................................
Sensibilidade
91dB
91dB
91dB
91dB
93dB
93dB
................................................................................................................................................................................................................
d b : I n c r e d i b l e S o u n d , A f f o r d a b l e P r i c e
22
Especificações dos sistemas componentes da série db
db571
5" x 7"
coaxial
db651
6 1/2"
coaxial
db651s
6 1/2"
coaxial de
perfil delgado
db691
6" x 9"
tridirecional
db5251
5 1/4"
sistema
componente
db6501
6 1/2"
sistema
componente
db1001
1"
tweeter
................................................................................................................................................................................................................
5" x 7”
6 1/2"
6 1/2"
6" x 9"
5 1/4"
6 1/2"
n/a
(12.7cm x
17.8cm)
(16.0cm)
woofer médio
(16.0cm)
woofer médio
(15cm x 22.9cm)
woofer médio
(13.0cm)
woofer médio
(16.0cm)
woofer médio
woofer médio
woofer médio
................................................................................................................................................................................................................
3/4" (19mm)
tweeter de
3/4" (19mm)
tweeter de
3/4" (19mm)
tweeter de
1" (25.4mm)
tweeter de
1" (25.4mm)
tweeter de
1" (25.4mm)
tweeter de
1" (25.4mm)
tweeter de
cúpula macia
cúpula macia
cúpula macia
cúpula macia
3/4" (19mm)
tweeter de
cúpula macia
cúpula macia
cúpula macia
cúpula macia
................................................................................................................................................................................................................
7 1/8" x 4 15/16"
(181mm x
125.4mm)
5"
5"
8 1/2" x 5 3/4"
(215.9mm x
146mm)
4 11/16"
(119mm)
5"
2 1/16"
(52.39mm)
base de
(127mm)
(127mm)
(127mm)
montagem
................................................................................................................................................................................................................
2 3/16"
2"
2"
3 3/16"
2 5/16"
2"
1 3/16"
(55.6mm)
(50.8mm)
(50.8mm)
(81.0mm)
(58.7mm)
(50.8mm)
(30.2mm)
................................................................................................................................................................................................................
2 5/8"
2 5/16"
2 5/16"
3 3/4"
2 7/16"
2 5/16"
1 1/32"
(66.7mm)
(58.74mm)
(58.7mm)
(95.2mm)
(61.9mm)
(58.7mm)
(26.2mm)
................................................................................................................................................................................................................
180w 180w 165w 300w 250w 300w 180w
................................................................................................................................................................................................................
60w 60w 55w 100w 100w 100w 60w
................................................................................................................................................................................................................
4 Ω 4 Ω 4 Ω 4 Ω 4 Ω 4 Ω 4 Ω
................................................................................................................................................................................................................
52-22kHz 35-22kHz 50-22kHz 35-22kHz 53-23kHz 35-23kHz 4kHz-23kHz
................................................................................................................................................................................................................
n/a
1 1/8"
1 1/8"
1 1/4"
1"
1 1/8"
n/a
(28.58mm)
(28.58mm)
(31.75mm)
(25.4mm)
(28.58mm)
................................................................................................................................................................................................................
93dB
92dB
92dB
93dB
93dB
92dB
92dB
......................................................................................................................................................................................
M o r e I n f o
@
w w w . p o l k a u d i o . c o m / c a r
23
ITALIANO
Dati tecnici dei modelli Serie db
db351
3 1/2"
coassiale
db401
4"
coassiale
db461
4" x 6"
coassiale
db461p
4" x 6"
piastra
db501
5"
coassiale
db521
5 1/4"
coassiale
Tipo
................................................................................................................................................................................................................
Driver
3 1/2"
4"
4" x 6"
4"
5"
5 1/4"
complement
(8.89cm)
mid/woofer
(10.2cm)
mid/woofer
(10cm x 15cm)
mid/woofer
(10.2cm)
mid/woofer
(12.7cm)
mid/woofer
(13.0cm)
mid/woofer
................................................................................................................................................................................................................
Tweeter
complement
1/2" (12mm)
tweeter
3/4" (19mm)
tweeter
3/4" (19mm)
tweeter
3/4" (19mm)
tweeter
3/4" (19mm)
tweeter
3/4" (19mm)
tweeter
a cupola
morbida
a cupola
morbida
a cupola
morbida
a cupola
morbida
a cupola
morbida
a cupola
morbida
................................................................................................................................................................................................................
Dimensioni
di fissaggio
3 1/8"
(79.36mm)
4"
6" x 4"
(152.4mm x
101.6mm)
6" x 4"
(152.4mm x
101.6mm)
4"
4 11/16"
(119mm)
(101.6mm)
(101.6mm)
................................................................................................................................................................................................................
Profondità
di fissaggio
1 1/2"
(38.1mm)
1 13/16"
(46.0mm)
1 15/16"
(49.2mm)
1 13/16"
(46.04mm)
1 13/16"
(46.0mm)
2 5/16"
(58.7mm)
(parte superiore)
................................................................................................................................................................................................................
Profondità
1 11/16"
1 15/16"
2"
2"
1 15/16"
2 7/16"
di fissaggio
(parte inferiore)
(42.86mm)
(49.21mm)
(50.8mm)
(50.8mm)
(49.21mm)
(61.9mm)
................................................................................................................................................................................................................
Potenza
105w
135w
120w
150w
135w
135w
di picco nominale
................................................................................................................................................................................................................
Potenza
35w
45w
40w
50w
45w
45w
continua nominale
................................................................................................................................................................................................................
Impedenza
nominale
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
................................................................................................................................................................................................................
Risposta
90-22kHz
85-22kHz
75-22kHz
71-22kHz
65-22kHz
60-22kHz
in frequenza
................................................................................................................................................................................................................
Altezza griglia
n/a
3/4"
n/a
n/a
n/a
1"
(6.35mm)
(25.4mm)
................................................................................................................................................................................................................
Sensibilità
91dB
91dB
91dB
91dB
93dB
93dB
......................................................................................................................................................................................
24 d b : I n c r e d i b l e S o u n d , A f f o r d a b l e P r i c e
Dati tecnici dei sistemi componenti Serie db
db571
5" x 7"
coassiale
db651
6 1/2"
coassiale
db651s
6 1/2"
coassiale
a filo
db691
6" x 9"
a tre vie
db5251
5 1/4"
sistema
componente
db6501
6 1/2"
sistema
componente
db1001
1"
tweeter
................................................................................................................................................................................................................
5" x 7”
6 1/2"
6 1/2"
6" x 9"
5 1/4"
6 1/2"
n/a
(12.7cm x
17.8cm)
(16.0cm)
mid/woofer
(16.0cm)
mid/woofer
(15cm x 22.9cm)
mid/woofer
(13.0cm)
mid/woofer
(16.0cm)
mid/woofer
mid/woofer
mid/woofer
................................................................................................................................................................................................................
3/4" (19mm)
tweeter
3/4" (19mm)
tweeter
3/4" (19mm)
tweeter
1" (25.4mm)
tweeter
1" (25.4mm)
tweeter
1" (25.4mm)
tweeter
1" (25.4mm)
tweeter
a cupola
morbida
a cupola
morbida
a cupola
morbida
a cupola
3/4" (19mm)
tweeter
a cupola
morbida
a cupola
morbida
a cupola
morbida
a cupola morbida
................................................................................................................................................................................................................
7 1/8" x 4 15/16"
(181mm x
125.4mm)
5"
5"
8 1/2" x 5 3/4"
(215.9mm x
146mm)
4 11/16"
(119mm)
5"
2 1/16"
(52.39mm)
cassa
(127mm)
(127mm)
(127mm)
................................................................................................................................................................................................................
2 3/16"
2"
2"
3 3/16"
2 5/16"
2"
1 3/16"
(55.6mm)
(50.8mm)
(50.8mm)
(81.0mm)
(58.7mm)
(50.8mm)
(30.2mm)
................................................................................................................................................................................................................
2 5/8"
2 5/16"
2 5/16"
3 3/4"
2 7/16"
2 5/16"
1 1/32"
(66.7mm)
(58.74mm)
(58.7mm)
(95.2mm)
(61.9mm)
(58.7mm)
(26.2mm)
................................................................................................................................................................................................................
180w 180w 165w 300w 250w 300w 180w
................................................................................................................................................................................................................
60w 60w 55w 100w 100w 100w 60w
................................................................................................................................................................................................................
4 Ω 4 Ω 4 Ω 4 Ω 4 Ω 4 Ω 4 Ω
................................................................................................................................................................................................................
52-22kHz 35-22kHz 50-22kHz 35-22kHz 53-23kHz 35-23kHz 4kHz-23kHz
................................................................................................................................................................................................................
n/a
1 1/8"
1 1/8"
1 1/4"
1"
1 1/8"
n/a
(28.58mm)
(28.58mm)
(31.75mm)
(25.4mm)
(28.58mm)
................................................................................................................................................................................................................
93dB
92dB
92dB
93dB
93dB
92dB
92dB
......................................................................................................................................................................................
M o r e I n f o
@
w w w . p o l k a u d i o . c o m / c a r 25
d b : I n c r e d i b l e S o u n d , A f f o r d a b l e P r i c e
26
1 YEAR WARRANTY
Polk Audio, Inc. warrants to the original purchaser only that this Polk Audio db Product (the Product) will be free
from defects in materials and workmanship for a period of (1) one year from the date of original retail purchase
from a Polk Audio Authorized Dealer. However, this warranty will automatically terminate prior to the expiration
of the (1) one year period if the original retail purchaser sells or otherwise transfers the Product to any other
party. The original retail purchaser shall herein after be referred to as “you.” To allow Polk Audio to offer the
best possible warranty service, please fill out the Product Registration Card(s) and send them to the Factory
at the address provided in the Registration Card within (10) ten days of the date of purchase.
Defective Products must be shipped, together with a proof of purchase, prepaid insured to the Authorized Polk
Audio Dealer from whom you purchased the Product, or to 2550 Brittania Blvd., Suite A, San Diego, CA 92154.
Products must be shipped in the original shipping container or its equivalent; in any case the risk of loss or
damage in transit is to be borne by you. If, upon examination at the Factory or Polk Audio Authorized Dealer it
is determined that the unit was defective in materials or workmanship at any time during the Warranty period,
Polk Audio or the Polk Audio Dealer will, at its option, repair or replace this Product at no additional charge,
except as set forth below. All replaced parts and Products become property of Polk Audio. Products replaced
or repaired under this Warranty will be returned to you, within a reasonable time, freight prepaid.
This Warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse,
negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess of the rated
maximum of the unit, cosmetic appearance of the cabinetry not directly attributable to defects in materials
or workmanship, or service, repair, or modifications of the Product which has not been authorized or approved
by Polk Audio.
This Warranty is in lieu of all other expressed Warranties. If this Product is defective in materials and workman-
ship as warranted above, your sole remedy shall be repair or replacement as provided above. In no event will
Polk Audio, Inc. be liable to you for any incidental or consequential damages arising out of the use or inability
to use the Product, even if Polk Audio, Inc. or a Polk Audio Dealer has been advised of the possibility of such
damages, or any other claim by any other party. Some states do not allow the exclusion or limitation of conse-
quential damages, so the above limitation and exclusion may not apply to you. This Warranty gives you specific
legal rights which may vary from state to state.
This warranty applies only to Products purchased in the United States of America, its possessions, and U.S.
and NATO armed forces exchanges and audio clubs. The Warranty terms and conditions applicable to Products
purchased in other countries are available from the Polk Audio Authorized Distributors in such countries.
M o r e I n f o
@
w w w . p o l k a u d i o . c o m / c a r 27
|