Table of Contents
Usage Notice
Precautions ................................................................................. 2
Introduction
About the Product ....................................................................... 3
Package Overview...................................................................... 4
Installation
Product Overview ........................................................................ 5
Connecting the Display ............................................................... 7
User Controls
Front Panel Controls ................................................................... 10
How to Use the OSD Menus........................................................ 11
On-Screen Display Menus .......................................................... 12
Appendices
Troubleshooting .......................................................................... 16
Warning Signal ........................................................................... 17
Product Dimensions .................................................................... 18
Compatibility Modes ................................................................... 19
Pivot Software Installation..............................................................20
English
1
Usage Notice
Warning- To prevent the risk of fire or shock hazards, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Precautions
Follow all warnings, precautions and maintenance as recommended
in this users manual to maximize the life of your unit.
Do:
q Turn off the product before cleaning.
q Use only a dry soft cloth or clean room wiper when cleaning the
LCD panel surface.
q Use a soft cloth moistened with mild detergent to clean the
display housing.
q Use only high quality and safety approved AC/DC power
adapter.
q Disconnect the power plug from AC outlet if the product is not
used for a long period of time.
Dont:
q Do not touch the LCD panel surface with sharp or hard objects.
q Do not use abrasive cleaners, waxes or solvents for your
cleaning.
q Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- Place in direct sunlight.
English
2
Introduction
About the Product
Having a 19 flat panel screen with an active matrix, thin-film transistor
(TFT) liquid crystal display (LCD) , this product also demonstrates
following outstanding features:
q Analog and Digital signal input
q Active matrix TFT LCD technology
q 1280 x 1024 addressable pixels
q 19 diagonal screen size
q 31.5 ~ 80 kHz horizontal scan
q 56 ~ 75 Hz refresh rate
q VESA wall mountable
q Auto-adjustment
q Multilingual OSD user controls
q Adjustment stand design brings users the conveniences for easy
storage and VESA Mounting applications
q VESADPMS power saving
q Kensington lock capability
English
3
Package Overview
LCD Display
Power Adapter
Power Cord
DVI-D Cable
VGA Signal Cable
Users Manual
Quick Start Guide
Planar Product
Family CD
CD-ROM for
Pivot software
English
4
Installation
Product Overview
u
Front View
LCDDisplay
Panel
Controls
Stand
u
Rear View
Kensington Lock
Connector Ports
DC
Digital Port
VGA Input
Power-In
English
5
VESA Mount on your monitor
This monitor conforms to the VESA Flat Panel Mounting Physical
Mounting Interface Standard which defines a physical mounting interface
for flat panel monitors, and corresponding standards for flat panel
monitor mounting devices, such as wall and table arms.The VESA
mounting interface is located on the back of your monitor.
To mount the monitor on a swing arm or other mounting fixture,
follow the instruction included with the mounting fixture to be used.
Slots
100mm
VESA
Mounting
Interface
100mm
Warning!
Please must select the proper screws!
The depth from plastic back cover to the bottom of the screw hole is 8mm.
The spec is M4 screw.
English
6
Conne c ting the Displa y (Figure 8.1)
To setup this display, please refer to the following figure and procedures.
1. Be sure all equipments are off.
2. Connect the DC power cord to the power connector; plug one end of the
AC power cord into the power adapter, and then the other end into an
electrical outlet(u).
3. Connect the VGA signal cable from display VGA input connector to the
15-pin connector of your host computer and tighten the screws(v).
4. For the PC with DVI digital output: Connect the DVI signal cable to the
connector of the display card in your computer; connect the other side to
the DVI-D input port of your display. Tighten the screws(w).
5. Turn on your computer and display.
Note: To ensure the LCD display can work well with your computer, please
configure the display mode of your graphic card to make it less than or equal
to 1280 x 1024 resolution and make sure timing of the display mode is
compatible with the LCD display. We have listed the Compatibility Modes
of this LCD display in appendices for your reference.
English
7
Figure 8.1
VGA
Cable
Power Adapter
& Power Cord
DVI-D Cable
English
8
User Controls
Front Panel Controls
No./ Icon
Control
Function
MENU
Menu button
Select/Auto
To pop up the OSD menus.
SELECT/AUTO
Select- To select the adjust-
ment items from OSD menus.
Auto-To activate the Auto
Adjustment function to obtain
an optimum image.
Brightness Minus/Minus 1.Decreases the brightness of
the display image.
3
2.Decreases value of the
adjustment items.
Brightness Plus/Plus
Power LED
1.Increases the brightness of
the display image.
2.Increases value of the
adjustment items.
4
1.Green indicates the display
is turned on.
2. Amber indicates the display
in power-saving mode.
Power Switch
Switches on/off the power of
the LCD display.
English
10
How to Use the OSD Menus
1. Press the M button to pop up the on-screen menu and to select
between the four Main Menus.
2. Choose the adjustment items by pressing the S button.
3. Adjust the value of the adjustment items by pressing the or
-
+
button.
4. Once you dont operate the OSD menus after a pre-set time, the OSD
menus will automatically disappear.
English
11
On-ScreenDisplay Menus
First OSD Menu:
4 Auto-Adjustment
Chooses this function to obtain an optimum image.
4 Contrast
Adjusts the contrast of the display image.
4 Brightness
Adjusts the brightness of the display image.
4 Horizontal Position
Changes the horizontal position of the image.
4 Vertical Position
Changes the vertical position of the image.
4 Clock
Changes the display data frequency to match the frequency of your
graphic card. When you are experiencing vertical flickering bar, use
this function to make an adjustment.
4 Phase
Synchronizes the signal timing of the display to that of the graphic card.
When you are experiencing unstable to flickering image, use this function to
make an adjustment.
English
12
Second OSD Menu:
4 Display Mode
Selects this function to demonstrate the display resolution, vertical refresh,
and horizontal scan of the current mode.
4 OSD Off-Time
Adjusts the time period for OSD menu disappear.
4 Language
Chooses the language you need.
4 Sharpness
Adjust the sharpness of the image.
4 Reset
Returns the display parameters of the current mode to its factory default
settings.
English
13
Third OSD Menu:
4 Input Select
It allows you to select the type of signal.
English
14
Fourth OSD Menu:
4 Color Setting
Adjusts the color temperature.
4 Color Adjustment-Red
It allows you to adjust the red color of the display.
4 Color Adjustment-Green
It allows you to adjust the green color of the display.
4 Color Adjustment-Blue
It allows you to adjust the blue color of the display.
English
15
Appendices
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the
follows. If the problem persists, please contact your local dealer or
our service center.
Problem: No image appears on screen.
Check that all the I/O and power connectors are correctly and
well connected as described in the Installation section.
4
Make sure the pins of the connectors are not crooked or broken.
4
Problem: Partial image or incorrectly displayed the image.
Check to see if the resolution of your computer is higher than that
of the LCD display.
4
Reconfigure the resolution of your computer to make it less than
4
or equal to 1280 x 1024.
Problem: Image has vertical flickering line bars.
Use Frequency to make an adjustment.
4
Check and reconfigure the display mode of the vertical refresh
rate of your graphic card to make it compatible with the LCD
display.
4
Problem: Image is unstable and flickering
Use Tracking to make an adjustment.
4
Problem: Image is scrolling
Check and make sure the VGA signal cable (or adapter) is well
connected.
4
Check and reconfigure the display mode of the vertical refresh
rate of your graphic card to make it compatible with the LCD
display.
4
Problem: Vague image (characters and graphics)
Use Frequency to make an adjustment. If this problem still exists,
use Tracking to make an adjustment.
4
English
16
Warning Signal
Sometimes you probably will see the warning messages from this
LCD screen. This means that the LCD display cannot exactly receive the
signal from the computer graphic card.
There are three kind of situations may happen.Please check with the
connected cables or contact your local dealer for more information.
4No Signal
This message means that the LCD display has been powered on but it
cannot receive any signal from the computer graphic card. Check all the
power switches, power cables, and VGA signal cable.
4Going to Sleep
This message means that the LCD display is under the power saving
mode. In addition, the LCD display will go to this sleeping mode when
experiencing a sudden signal disconnecting problem.
4Unsupport Mode
This message means that the signal of the computer graphic card is not
compatible with the LCD display. When the signal is not included in the
compatibility mode we have listed in the Appendices of this manual, the
LCD display will appear this message.
English
17
Product Dimensions
417.78mm/16.45
508.74mm/20.03
Front View
59mm/2.32
Side View
215.40mm/8.48
Top View
English
18
Compatibility Modes
Mode
Resolution
640 x 350
640 x 400
640 x 480
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
640 x 480
640 x 480
832 x 624
1024 x 768
1152 x 900
1152 x 900
Frequency (Hz)
H. Frequency (kHz)
31.5
IBM VGA
70
70
60
70
72
75
56
60
72
75
60
70
75
60
75
67
67
75
75
66
76
IBM VGA
31.5
IBM VGA
31.5
IBM VGA
31.5
VESA VGA
VESA VGA
VESA SVGA
VESA SVGA
VESA SVGA
VESA SVGA
VESA XGA
VESA XGA
VESA XGA
VESA SXGA
VESA SXGA
Apple Mac LC
Apple Mac II
Apple Mac
Apple Mac
Sun Micro
37.9
37.5
35.2
37.9
48.1
46.9
48.4
56.5
60.0
64.0
80
34.9
35.0
49.7
60.2
61.8
Sun Micro
71.1
English
19
Pivot Software Installation
Follows are the procedures for pivot software set up.
1. Insert the Pivot Pro CD-ROM into the CD-ROM driver.
2. Run the Start_Pivot program and select the pivot option to install
portrait displays software on your computer.
3. Restart your computer. To Change orientation, right click anywhere on
the desktop and select Rotate 0, 90, 180, or 270 from the menu. Now
hold the edges of your display and rotate it.
4. Start exploring the benefits of your new portrait monitor. Web pages,
E-mail, reports and letters are best viewed in portrait orientation. They
can be viewed and edited without the need to scroll the page.
English
20
|