Pioneer Elite BDP 95FD User Manual

Operating Instructions

Blu-ray Disc PLAYER

CAUTION

The following caution label appears on your unit.

Location: inside of the unit

This product is a class 1 laser product, but this

product contains a laser diode higher than Class 1.

To ensure continued safety, do not remove any covers

or attempt to gain access to the inside of the product.

Refer all servicing to qualified personnel.

D3-4-2-1-8_B_En

Operating Environment

ꢀꢁꢂꢃꢄꢃꢅ

ꢀ#ꢁ$ꢂ&ꢃ!ꢄꢀꢁ!(ꢃ$"! ꢁ!&ꢀ&ꢁ #ꢁ$ꢂ&'$ꢁꢀꢂ!ꢅꢀꢆ' ꢃꢅꢃ&*ꢇ

ꢈꢉꢀ+ꢊꢀ&"ꢀꢈꢋꢉꢀ+ꢊꢀꢌꢈ ꢍꢀ+ꢎꢀ&"ꢀꢈꢏꢉꢀ+ꢎꢐꢑꢀꢒꢁ%%ꢀ&ꢆꢂ!ꢀꢓꢉꢀꢔꢕꢖꢀ

ꢌꢗ""ꢒꢃ!ꢄꢀ(ꢁ!&%ꢀ!"&ꢀꢘꢒ"ꢗꢙꢁꢅꢐ

ꢆ"ꢇ#%ꢈ)ꢈ!'ꢇꢉꢇꢊꢋ%ꢈꢇꢌꢉ+ꢉ%ꢍꢎꢇꢍ"ꢇ!"'ꢇ#ꢏꢉꢐꢈꢇꢉ!*ꢇ!ꢉꢑꢈꢍꢇ

ꢊꢏꢉ ꢈꢇ&"(%ꢐꢈ&ꢇꢒ&(ꢐꢌꢇꢉ&ꢇꢉꢇꢏꢋꢓꢌ'ꢈꢍꢇꢐꢉ!ꢍꢏꢈꢔꢇ"!ꢇ'ꢌꢈꢇ

ꢈ$(ꢋ# ꢈ!'ꢕꢇ ꢇ ꢇ

ꢖ

ꢗꢘꢗꢙꢗꢚꢗꢛꢉꢜꢁꢜꢝ!

ꢚ"ꢀ!"&ꢀꢃ!%&ꢂꢒꢒꢀ&ꢆꢃ%ꢀ'!ꢃ&ꢀꢃ!ꢀꢂꢀ#""$ꢒ*ꢀ(ꢁ!&ꢃꢒꢂ&ꢁꢅꢀꢂ$ꢁꢂꢛꢀ"$ꢀꢃ!ꢀ

ꢒ"ꢗꢂ&ꢃ"!%ꢀꢁ)#"%ꢁꢅꢀ&"ꢀꢆꢃꢄꢆꢀꢆ' ꢃꢅꢃ&*ꢀ"$ꢀꢅꢃ$ꢁꢗ&ꢀ%'!ꢒꢃꢄꢆ&ꢀꢌ"$ꢀ

%&$"!ꢄꢀꢂ$&ꢃꢜꢃꢗꢃꢂꢒꢀꢒꢃꢄꢆ&ꢐ

D3-4-2-1-7c_A_En

WARNING

This equipment is not waterproof. To prevent a fire

or shock hazard, do not place any container filled

with liquid near this equipment (such as a vase or

flower pot) or expose it to dripping, splashing, rain

ꢀꢁꢂꢃꢄꢅꢆꢃꢄꢇꢂꢇꢈꢆꢉꢃꢄꢇꢂ

ꢊ$!)ꢇ%)./ꢋ''%)#ꢇ/$%.ꢇ0)%/ꢎꢇ(ꢋ&!ꢇ.0-!ꢇ/*ꢇ'!ꢋ1!ꢇ.+ꢋꢌ!ꢇ

ꢋ-*0) ꢇ/$!ꢇ0)%/ꢇ"*-ꢇ1!)/%'ꢋ/%*)ꢇ/*ꢇ%(+-*1!ꢇ$!ꢋ/ꢇ

-ꢋ %ꢋ/%*)ꢇꢒꢋ/ꢇ'!ꢋ./ꢇꢍꢎꢇꢌ(ꢇꢋ/ꢇ/*+ꢎꢇꢍꢎꢇꢌ(ꢇꢋ/ꢇ-!ꢋ-ꢎꢇꢋ) ꢇ

ꢍꢎꢇꢌ(ꢇꢋ/ꢇ!ꢋꢌ$ꢇ.% !ꢔꢕ

or moisture.

D3-4-2-1-3_B_En

ꢊꢆꢏꢂꢄꢂꢐ

ꢀꢁꢁꢂꢃꢂꢄꢇ

ꢑ'*/.ꢇꢋ) ꢇ*+!)%)#.ꢇ%)ꢇ/$!ꢇꢌꢋꢒ%)!/ꢇꢋ-!ꢇ+-*1% ! ꢇ"*-ꢇ

1!)/%'ꢋ/%*)ꢇ/*ꢇ!).0-!ꢇ-!'%ꢋꢒ'!ꢇ*+!-ꢋ/%*)ꢇ*"ꢇ/$!ꢇ

+-* 0ꢌ/ꢎꢇꢋ) ꢇ/*ꢇ+-*/!ꢌ/ꢇ%/ꢇ"-*(ꢇ*1!-$!ꢋ/%)#ꢕꢇꢃ*ꢇ

+-!1!)/ꢇ"%-!ꢇ$ꢋ4ꢋ- ꢎꢇ/$!ꢇ*+!)%)#.ꢇ.$*0' ꢇ)!1!-ꢇꢒ!ꢇ

ꢒ'*ꢌ&! ꢇ*-ꢇꢌ*1!-! ꢇ2%/$ꢇ%/!(.ꢇꢒ.0ꢌ$ꢇꢋ.ꢇ)!2.+ꢋ+!-.ꢎꢇ

/ꢋꢒ'!ꢗꢌ'*/$.ꢎꢇꢌ0-/ꢋ%).ꢔꢇ*-ꢇꢒ3ꢇ*+!-ꢋ/%)#ꢇ/$!ꢇ

ꢌꢃ ꢇꢀꢁꢀꢂꢃꢄꢅꢅꢆꢇꢅꢀꢆꢇꢀ ꢈꢀꢀꢉꢊꢁꢀ ꢆꢀꢋꢉꢀꢉꢆꢌꢁꢍꢀꢀꢁꢎꢏꢀꢉꢊꢁꢀ ꢈꢃꢃꢈꢐꢆꢇꢅꢀ

ꢀꢋꢁꢑꢉꢆꢈꢇꢀꢑꢎꢀꢁ ꢄꢃꢃꢒꢓ

ꢅꢆꢇꢇ+$!)ꢈꢉꢇꢇ$ꢊꢇ)ꢆꢇꢇꢈ+ꢈ !ꢈꢋ!ꢇꢇ%$,ꢇ'ꢇ(*%%!-ꢇꢌ ꢊꢊꢇ'(ꢇ

ꢈꢍꢍ$'ꢌ #ꢉꢇ)$ꢇꢍ$*#)'-ꢇ$'ꢇ'ꢇꢉ $#ꢕꢇꢎꢇꢇ(*'ꢇꢇ)ꢆꢈ)ꢇ)ꢆꢇꢇ

%$,ꢇ'ꢇ(*%%!-ꢇ+$!)ꢈꢉꢇꢇ$ꢊꢇ)ꢆꢇꢇꢈ'ꢇꢈꢇ,ꢆꢇ'ꢇꢇ)ꢆ (ꢇ*# )ꢇ

, !!ꢇꢋꢇꢇ*(ꢇꢌꢇ"ꢇꢇ)(ꢇ)ꢆꢇꢇ'ꢇ&* 'ꢇꢌꢇ+$!)ꢈꢉꢇꢇꢒꢇꢕꢉꢕꢎꢇ ꢏꢐꢇꢑꢇ

!,0%+(!)/ꢇ*)ꢇ/$%ꢌ&ꢇꢌꢋ-+!/ꢇ*-ꢇꢋꢇꢒ! ꢕ

ꢇ

ꢓꢔꢗꢕꢗ ꢗꢍꢗꢖꢒꢗꢆꢗꢁ)

$'ꢇꢒ ꢐꢇꢑꢔꢇ,' ))ꢇ#ꢇ$#ꢇ)ꢆꢇꢇ'ꢇꢈ'ꢇ%ꢈ#ꢇ!ꢕꢇ

ꢓꢏꢗꢔꢗ ꢗꢒꢗꢔꢕꢁꢕꢖ#

ꢚꢀꢛꢁꢑꢀꢀꢁꢀꢂꢃ ꢄꢀꢅꢆꢀꢇꢈꢉꢊꢀ ꢋꢉꢇꢀꢌꢅꢍꢊꢀꢋꢅꢇꢀꢎꢏꢇꢐꢈꢀꢇꢈꢍꢀꢀꢁꢀ

ꢅ ꢇꢃꢍꢇꢀ$ꢅ ꢀ"ꢏꢋꢇꢀꢇꢅꢀ ꢊꢍꢑꢀꢇꢈꢍꢀꢂꢃ ꢄꢀꢎ ꢊꢇꢀꢒꢍꢀꢓꢍꢎꢅ!ꢍꢌꢀ

ꢏꢋꢌꢀꢏꢂꢂꢓꢅꢂꢓꢉꢏꢇꢍꢀꢅꢋꢍꢀꢆꢉꢇꢇꢍꢌꢔꢀꢕꢍꢂꢃꢏꢐꢍꢎꢍꢋꢇꢀꢏꢋꢌꢀ

ꢎꢅ ꢋꢇꢉꢋꢄꢀꢅꢆꢀꢏꢋꢀꢀꢁꢀꢂꢃ ꢄꢀꢅꢋꢀꢇꢈꢍꢀꢂꢅ"ꢍꢓꢀꢊ ꢂꢂꢃ$ꢀꢐꢅꢓꢌꢀꢅꢆꢀ

ꢇꢈꢉꢊꢀ ꢋꢉꢇꢀꢊꢈꢅ ꢃꢌꢀꢒꢍꢀꢂꢍꢓꢆꢅꢓꢎꢍꢌꢀꢅꢋꢃ$ꢀꢒ$ꢀꢖ ꢏꢃꢉꢆꢉꢍꢌꢀ

ꢊꢍꢓ!ꢉꢐꢍꢀꢂꢍꢓꢊꢅꢋꢋꢍꢃꢔꢀ ꢆꢀꢐꢅꢋꢋꢍꢐꢇꢍꢌꢀꢇꢅꢀꢏꢋꢀꢀꢁꢀꢅ ꢇꢃꢍꢇꢑꢀꢇꢈꢍꢀ

ꢐ ꢇꢗꢅꢆꢆꢀꢂꢃ ꢄꢀꢐꢏꢋꢀꢐꢏ ꢊꢍꢀꢊꢍ!ꢍꢓꢍꢀꢍꢃꢍꢐꢇꢓꢉꢐꢏꢃꢀꢊꢈꢅꢐꢘꢔꢀꢙꢏꢘꢍꢀ

ꢊ ꢓꢍꢀꢉꢇꢀꢉꢊꢀꢂꢓꢅꢂꢍꢓꢃ$ꢀꢌꢉꢊꢂꢅꢊꢍꢌꢀꢅꢆꢀꢏꢆꢇꢍꢓꢀꢓꢍꢎꢅ!ꢏꢃꢔ

ꢀꢁꢂꢃꢀꢄꢅꢆꢇꢈꢉꢊꢀꢂꢃꢀꢋꢆꢅꢀꢌꢍꢎꢍꢅꢏꢐꢀꢁꢆꢈꢃꢍꢁꢆꢐꢇꢀꢄꢈꢅꢄꢆꢃꢍꢃꢑꢀꢒꢎꢓꢀ

ꢋꢏꢂꢐꢈꢅꢍꢀꢇꢈꢍꢀꢊꢆꢀꢈꢃꢍꢀꢋꢆꢅꢀꢆꢊꢁꢍꢅꢀꢊꢁꢏꢎꢀꢁꢆꢈꢃꢍꢁꢆꢐꢇꢀꢄꢈꢅꢄꢆꢃꢍꢃꢀ

ꢔꢃꢈꢉꢁꢀꢏꢃꢀꢐꢆꢎꢌꢕꢊꢍꢅꢖꢀꢈꢃꢍꢀꢋꢆꢅꢀ ꢈꢃꢂꢎꢍꢃꢃꢀꢄꢈꢅꢄꢆꢃꢍꢃꢀꢂꢎꢀꢏꢀ

ꢅꢍꢃꢊꢏꢈꢅꢏꢎꢊꢀꢆꢅꢀꢈꢃꢍꢀꢂꢎꢀꢏꢀꢉꢏꢅꢀꢆꢅꢀꢃꢁꢂꢄꢗꢀꢏꢎꢇꢀꢘꢁꢂꢉꢁꢀ

ꢅꢍꢙꢈꢂꢅꢍꢃꢀꢅꢍꢄꢏꢂꢅꢀꢘꢂꢐꢐꢀ ꢍꢀꢉꢁꢏꢅꢌꢍꢇꢀꢋꢆꢅꢀꢍꢚꢍꢎꢀꢇꢈꢅꢂꢎꢌꢀꢊꢁꢍꢀ

ꢘꢏꢅꢅꢏꢎꢊꢓꢀꢄꢍꢅꢂꢆꢇꢑꢀ

ꢀꢁꢂꢃꢄꢅꢆ

ꢀ ꢁꢂꢃꢄꢅ ꢃꢆꢇꢅꢇꢈꢉꢊ ꢋ

ꢚꢈꢍꢀꢍꢖ ꢉꢂꢎꢍꢋꢇꢀꢊꢈꢅ ꢃꢌꢀꢒꢍꢀꢌꢉꢊꢐꢅꢋꢋꢍꢐꢇꢍꢌꢀꢒ$ꢀꢓꢍꢎꢅ!ꢉꢋꢄꢀ

ꢇꢈꢍꢀꢎꢏꢉꢋꢊꢀꢂꢃ ꢄꢀꢆꢓꢅꢎꢀꢇꢈꢍꢀ"ꢏꢃꢃꢀꢊꢅꢐꢘꢍꢇꢀ"ꢈꢍꢋꢀꢃꢍꢆꢇꢀ

ꢋ ꢊꢍꢌꢀꢆꢅꢓꢀꢏꢀꢃꢅꢋꢄꢀꢂꢍꢓꢉꢅꢌꢀꢅꢆꢀꢇꢉꢎꢍꢀꢛꢆꢅꢓꢀꢍ#ꢏꢎꢂꢃꢍꢑꢀ"ꢈꢍꢋꢀ

ꢀꢁꢂꢃꢄꢅꢀꢆꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢀꢌ!ꢀꢆꢇꢅꢀꢈꢄꢍꢎꢏꢀꢒꢉꢀꢂꢉꢆꢀꢈꢍꢄꢄꢀꢉꢍꢆꢀꢆꢇꢅꢀ

ꢈꢄꢍꢎꢀꢌ!ꢀꢆꢍꢎꢎꢐꢂꢎꢀꢆꢇꢅꢀꢋꢉꢊꢃꢀꢁꢂꢃꢀꢂꢅꢑꢅꢊꢀꢆꢉꢍꢋꢇꢀꢆꢇꢅꢀꢈꢉ ꢅꢊꢀ

ꢋꢉꢊꢃꢀ ꢇꢅꢂꢀ!ꢉꢍꢊꢀꢇꢁꢂꢃꢒꢀꢁꢊꢅꢀ ꢅꢆꢀꢁꢒꢀꢆꢇꢐꢒꢀꢋꢉꢍꢄꢃꢀꢋꢁꢍꢒꢅꢀꢁꢀ

ꢒꢇꢉꢊꢆꢀꢋꢐꢊꢋꢍꢐꢆꢀꢉꢊꢀꢅꢄꢅꢋꢆꢊꢐꢋꢀꢒꢇꢉꢋꢓꢏꢀꢒꢉꢀꢂꢉꢆꢀꢈꢄꢁꢋꢅꢀꢆꢇꢅꢀꢍꢂꢐꢆꢔꢀꢁꢀ

ꢈꢐꢅꢋꢅꢀꢉꢕꢀꢕꢍꢊꢂꢐꢆꢍꢊꢅꢔꢀꢅꢆꢋꢏꢔꢀꢉꢂꢀꢆꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢔꢀꢉꢊꢀꢈꢐꢂꢋꢇꢀꢆꢇꢅꢀ

ꢋꢉꢊꢃꢏꢀ ꢅꢑꢅꢊꢀꢖꢁꢓꢅꢀꢁꢀꢓꢂꢉꢆꢀꢐꢂꢀꢆꢇꢅꢀꢋꢉꢊꢃꢀꢉꢊꢀꢆꢐꢅꢀꢐꢆꢀ ꢐꢆꢇꢀꢉꢆꢇꢅꢊꢀ

ꢋꢉꢊꢃꢒꢏꢀꢗꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢒꢀꢒꢇꢉꢍꢄꢃꢀꢌꢅꢀꢊꢉꢍꢆꢅꢃꢀꢒꢍꢋꢇꢀꢆꢇꢁꢆꢀꢆꢇꢅ!ꢀ

ꢁꢊꢅꢀꢂꢉꢆꢀꢄꢐꢓꢅꢄ!ꢀꢆꢉꢀꢌꢅꢀꢒꢆꢅꢈꢈꢅꢃꢀꢉꢂꢏꢀꢘꢀꢃꢁꢖꢁꢎꢅꢃꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢀ

ꢋꢁꢂꢀꢋꢁꢍꢒꢅꢀꢁꢀꢕꢐꢊꢅꢀꢉꢊꢀꢎꢐꢑꢅꢀ!ꢉꢍꢀꢁꢂꢀꢅꢄꢅꢋꢆꢊꢐꢋꢁꢄꢀꢒꢇꢉꢋꢓꢏꢀꢑꢇꢅꢋꢓꢀ

ꢆꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢀꢉꢂꢋꢅꢀꢐꢂꢀꢁꢀ ꢇꢐꢄꢅꢏꢀꢙꢕꢀ!ꢉꢍꢀꢕꢐꢂꢃꢀꢐꢆꢀꢃꢁꢖꢁꢎꢅꢃꢔꢀ

ꢋꢉꢂꢆꢁꢋꢆꢀꢆꢇꢅꢀꢚꢐꢉꢂꢅꢅꢊꢀꢒꢅꢊꢑꢐꢋꢅꢀꢋꢅꢂꢆꢅꢊꢀꢉꢂꢀꢆꢇꢅꢀꢌꢁꢋꢓꢀꢋꢉꢑꢅꢊꢔꢀꢉꢊꢀ

!ꢉꢍꢊꢀꢃꢅꢁꢄꢅꢊꢀꢕꢉꢊꢀꢁꢀꢊꢅꢈꢄꢁꢋꢅꢖꢅꢂꢆꢏ

ꢅꢋꢀ!ꢏꢐꢏꢇꢉꢅꢋꢜꢔꢀ

ꢀ

ꢀꢅꢂꢁꢂꢂꢂꢂꢂꢃꢈ ꢄ ꢅꢉ

CAUTION

The ꢀꢁSTANDBY/ON switch on this unit will not

completely shut off all power from the AC outlet.

Since the power cord serves as the main disconnect

device for the unit, you will need to unplug it from

the AC outlet to shut down all power. Therefore,

make sure the unit has been installed so that the

power cord can be easily unplugged from the AC

outlet in case of an accident. To avoid fire hazard,

the power cord should also be unplugged from the

AC outlet when left unused for a long period of time

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and other

limited viewing uses only unless otherwise authorized

by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

(for example, when on vacation).

D3-4-2-2-2a_A_En

WARNING:ꢀꢛꢏꢀꢁꢂꢃꢀꢄꢀꢅꢆꢇꢀꢈꢉꢊꢁꢀꢉꢀꢀꢅꢆꢃꢋꢀꢌꢊꢉꢁꢍꢈꢅꢀꢉꢊꢀ

ꢈꢉꢊꢁꢋꢀꢎꢋꢋꢉꢈꢃꢎꢅꢇꢁꢀꢏꢃꢅꢆꢀꢎꢈꢈꢇꢋꢋꢉꢊꢃꢇꢋꢀꢋꢉꢂꢁꢀꢏꢃꢅꢆꢀꢅꢆꢇꢀ

ꢌꢊꢉꢁꢍꢈꢅꢀꢏꢃꢂꢂꢀꢇꢐꢌꢉꢋꢇꢀꢑꢉꢍꢀꢅꢉꢀꢈꢆꢇꢒꢃꢈꢎꢂꢋꢀꢂꢃꢋꢅꢇꢁꢀꢉꢀꢀ

ꢌꢊꢉꢌꢉꢋꢃꢅꢃꢉꢀꢀꢓꢔꢀꢕꢀꢉꢏꢀꢀꢅꢉꢀꢅꢆꢇꢀꢖꢅꢎꢅꢇꢀꢉꢗꢀꢑꢎꢂꢃꢗꢉꢊꢀꢃꢎꢀꢎꢀꢁꢀ

ꢉꢅꢆꢇꢊꢀꢄꢉꢘꢇꢊꢀꢒꢇꢀꢅꢎꢂꢀꢇꢀꢅꢃꢅꢃꢇꢋꢀꢅꢉꢀꢈꢎꢍꢋꢇꢀꢈꢎꢀꢈꢇꢊꢀꢎꢀꢁꢀ

ꢃꢊꢅꢆꢀꢁꢇꢗꢇꢈꢅꢀꢉꢊꢀꢉꢅꢆꢇꢊꢀꢊꢇꢌꢊꢉꢁꢍꢈꢅꢃꢘꢇꢀꢆꢎꢊꢒꢓ

Wash hands after handling

ꢀ

D36-P4_A_En

ꢀꢁꢂꢃꢀꢄꢅꢆꢇꢈꢉꢊꢀꢉꢆꢋꢊꢌꢂꢋꢃꢀꢍꢎꢅꢉꢈꢅꢏꢐꢀꢒꢂꢃꢄꢆꢃꢌꢑꢀꢆꢒꢀꢊꢁꢂꢃꢀ

ꢍꢌꢊꢎꢅꢂꢌꢑꢀꢍꢌꢏꢀꢓꢎꢀꢅꢎꢔꢈꢑꢌꢊꢎꢇꢀꢇꢈꢎꢀꢊꢆꢀꢎꢋꢕꢂꢅꢆꢋꢍꢎꢋꢊꢌꢑꢀ

ꢉꢆꢋꢃꢂꢇꢎꢅꢌꢊꢂꢆꢋꢃꢐꢀꢍꢆꢅꢀꢇꢂꢃꢄꢆꢃꢌꢑꢀꢆꢅꢀꢅꢎꢉꢏꢉꢑꢂꢋꢔꢀꢂꢋꢒꢆꢅꢍꢌꢊꢂꢆꢋꢖꢀ

ꢄꢑꢎꢌꢃꢎꢀꢉꢆꢋꢊꢌꢉꢊꢀꢏꢆꢈꢅꢀꢑꢆꢉꢌꢑꢀꢌꢈꢊꢁꢆꢅꢂꢊꢂꢎꢃꢀꢆꢅꢀꢊꢁꢎꢀꢃꢑꢎꢉꢊꢅꢆꢋꢂꢉꢃꢀ

ꢋꢇꢈꢃꢊꢅꢂꢎꢃꢀꢗꢑꢑꢂꢌꢋꢉꢎꢀꢘꢀꢙꢙꢙꢐꢎꢂꢌꢎꢐꢆꢅꢔꢐꢀ

ꢗꢌꢘꢙꢚꢛꢀ

ꢁꢂꢃꢄꢃꢄꢅꢀꢁꢂ

We Want You Listening For A Lifetime

Since hearing damage from loud noise is often

undetectable until it is too late, this manufacturer

and the Electronic Industries Association’s

Consumer Electronics Group recommend you avoid

prolonged exposure to excessive noise. This list of

sound levels is included for your protection.

Selecting fine audio equipment such as the unit

you’ve just purchased is only the start of your

musical enjoyment. Now it’s time to consider how

you can maximize the fun and excitement your

equipment offers. This manufacturer and the

Electronic Industries Association’s Consumer

Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that

lets the sound come through loud and clear without

annoying blaring or distortion-and, most importantly,

without affecting your sensitive hearing.

Decibel

Level Example

30 Quiet library, soft whispers

40 Living room, refrigerator, bedroom away from traffic

50 Light traffic, normal conversation, quiet office

60 Air conditioner at 20 feet, sewing machine

70 Vacuum cleaner, hair dryer, noisy restaurant

80 Average city traffic, garbage disposals, alarm clock

at two feet.

Sound can be deceiving. Over time your hearing

“comfort level” adapts to higher volumes of sound.

So what sounds “normal” can actually be loud and

harmful to your hearing. Guard against this by

setting your equipment at a safe level BEFORE your

hearing adapts.

THE FOLLOWING NOISES CAN BE DANGEROUS

UNDER CONSTANT EXPOSURE

90 Subway, motorcycle, truck traffic, lawn mower

100 Garbage truck, chain saw, pneumatic drill

120 Rock band concert in front of speakers,

thunderclap

140 Gunshot blast, jet plane

180 Rocket launching pad

To establish a safe level:

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it

comfortably and clearly, and without distortion.

Information courtesy of the Deafness Research Foundation.

Once you have established a comfortable sound

level:

• Set the dial and leave it there.

Taking a minute to do this now will help to prevent

hearing damage or loss in the future. After all, we

want you listening for a lifetime.

S001_En

Contents

01 Before you start

06 Using the Home Media Gallery

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Putting the batteries in the remote control. . . . . . . . . . . . . . . . . . 8

Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Disc/content format playback compatibility . . . . . . . . . . . . . . . . . 9

File compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Titles and chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

DVD-Video regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

BD-ROM regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

About network playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Using the Home Media Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Movie Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Photo Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Music Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

About Windows Media Player 11/Windows Media Connect . . . . 38

07 Video/Audio Adjust menu

Video Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Audio Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

02 Connecting up

Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Easy connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Using other types of video output. . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting for HDMI output . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting using the component video output . . . . . . . . . . . . . 13

Changing the output video resolution . . . . . . . . . . . . . . . . . . . . 14

Connecting using an S-Video output . . . . . . . . . . . . . . . . . . . . . 14

Connecting for surround sound . . . . . . . . . . . . . . . . . . . . . . . . . 15

Network connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Controlling this player via another Pioneer component . . . . . . . 16

Using an external IR receiver with this player. . . . . . . . . . . . . . . 17

08 Initial Setup menu

Using the Initial Setup menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

About the audio output settings . . . . . . . . . . . . . . . . . . . . . . . . . 44

Speaker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Software updating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

09 Additional information

Taking care of your player and discs . . . . . . . . . . . . . . . . . . . . . . 46

Screen sizes and disc formats. . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Resetting the player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Setting up the remote to control your TV . . . . . . . . . . . . . . . . . . . 48

TV Preset code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

BD/DVD language code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

BD/DVD country/area code list . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

03 Controls and displays

Front panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Front panel display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

04 Getting Started

Switching on and setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Using the on-screen displays . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Setting up for network use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Playing movies, music and photos. . . . . . . . . . . . . . . . . . . . . . . 22

Playing BD/DVD movies and Audio CD . . . . . . . . . . . . . . . . . . . 22

Playback controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

05 Using the Disc Navigator

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Movie Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Photo Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Music Navigator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Chapter 1

Before you start

Features

HDMI digital interface

The HDMI (High-Definition Multimedia Interface) interconnect

provides high quality digital audio and video, all from a single

user-friendly connector. HDMI is the first consumer electronics

interface to support uncompressed standard, enhanced, or

high-definition video plus standard to multi-channel surround

sound audio, all using one interface. You can easily connect to an

HDMI-equipped AV receiver or audio-visual device for high quality

audio and video.

BD-ROM playback

Blu-ray Disc is a next-generation video disc format featuring far

higher disc capacity than conventional DVD. The higher capacity

makes a whole range of new and enhanced features possible, such

as support for high-definition video up to 1920 x 1080 pixels, high

quality, surround sound audio, greater interactivity and richer

content.

• HDMI, the HDMI logo and High-Definition Multimedia Interface

are trademarks or registered trademarks of HDMI Licensing LLC.

BD-ROM discs are commercially produced discs (Video Distribution

format) that can contain movie and other video content, interactive

content, enhanced menu features such as pop-up menus (press

POPUP MENU/MENU during playback for these), full-color,

high-definition animated buttons and animated menu transition

effects, button sounds (sounds are played when menu buttons are

selected or activated), high-definition bitmap subtitles supporting

full-color images with frame-accurate animation effects up to full

video frame rate, and so on.

HDMI Control

By connecting this unit to a Pioneer plasma display or AV system

(amplifier or AV receiver etc.) with an HDMI cable, you can control

this unit from the connected plasma display, as well as have the

connected plasma display or AV system automatically change

inputs in response to this unit starting playback or having the GUI

screen (ex. Disc Navigator) displayed (known as the Auto-select

function). The connected plasma display can thereby have its power

turned from off to on by this function.

While BD capacity is enough for most applications, the BD-ROM

standard allows for content to be spread across several discs,

removing the limit of one physical disc. Follow the on-screen

instructions during playback when using these special kinds of

discs.

You can also have this unit turn on automatically when you control

this unit from a connected plasma display that is turned on

(Simultaneous power function).

Additionally, when the language information from a connected

plasma display is received, you can have this unit’s on-screen

display language change automatically to that of the plasma display

(only when playback is stopped and GUI screen is not displayed).

BD-J application

Refer to your plasma display’s operating manual for more

information regarding how your plasma display transmits language

information.

For more information about which operations can be carried out by

connecting via HDMI cable, refer to the operating manual for your

plasma display or AV system.

PureCinema

The BD-ROM specification supports Java for interactive content.

The Java specification for BD-ROM is known as BD-J. This allows

content providers to put games and other interactive material linked

to specific titles on to BD-ROM discs. (This player does not support

downloadable BD-J content, direct connection to the Internet or the

retrieval of content through the Internet.)

When you playback film material (24 frames/second) on a BD-ROM

or DVD-Video disc, the progressive scan line automatically converts

the film material to optimum quality (see PureCinema on page 39).

1080/60p and 1080/24p output video

This player supports a variety of output video resolutions, up to

1080 lines/60 frames per second, progressive (HDMI only), making

it ideal for playing high-definition Blu-ray Discs.

• Java and all Java-based trademarks and logos are trademarks or

registered trademarks of Sun Microsystems, Inc. in the U.S. and

other countries.

Esmertec and Jbed are trademarks and/or registered trademarks of

Esmertec AG.

Connect to a local area network

Connect this player to one or more computers in your house via

Ethernet and use them as media servers, streaming audio, video

and still image files for playback on your TV and/or audio system.

High quality audio

Putting the batteries in the remote control

•

Insert two AA/R6P batteries into the battery compartment

following the indications (,) inside the compartment.

Important

This player is compatible with Dolby TrueHD, Dolby Digital Plus,

DTS-HD High Resolution Audio, Dolby Digital and DTS.

Incorrect use of batteries can result in hazards such as leakage and

bursting. Please observe the following:

To enjoy Dolby TrueHD, Dolby Digital Plus or DTS-HD High

Resolution Audio at the maximum performance, connect this player

to a Dolby TrueHD, Dolby Digital Plus or DTS-HD High Resolution

Audio-compatible AV amplifier using an HDMI cable. Then, after

placing a Blu-ray Disc recording a material with Dolby TrueHD,

Dolby Digital Plus or DTS-HD High Resolution Audio, open the disc

menu and select “Dolby TrueHD”, “Dolby Digital Plus” or “DTS-HD

High Resolution Audio” from the menu.

• Don’t mix new and old batteries together.

• Don’t use different kinds of batteries together — although they

may look similar, different batteries may have different voltages.

• Make sure that the plus and minus ends of each battery match

the indications in the battery compartment.

• Remove batteries from equipment that isn’t going to be used for

a month or more.

For the output conditions of various audio types, see About the audio

output settings on page 44.

• When disposing of used batteries, please comply with

governmental regulations or environmental public instruction’s

rules that apply in your country/area.

• Manufactured under license from Dolby Laboratories. “Dolby” and

the double-D symbol are trademarks of Dolby Laboratories.

• WARNING

• “DTS” and “DTS Digital Surround” are registered trademarks of

DTS, Inc.

Do not use or store batteries in direct sunlight or other

excessively hot place, such as inside a car or near a heater. This

can cause batteries to leak, overheat, explode or catch fire. It

can also reduce the life or performance of batteries.

D3-4-2-3-3_En

Movie file playback

Video files encoded in the Windows Media™ Video (WMV), MPEG-1/

2 formats are playable from DVD-R/-RW, or from a connected media

server.

Using the remote control

Music file playback

This player supports various audio formats, including Windows

Media Audio (WMA), MP3 and WAV. You can play files stored on

DVD-R/-RW, or from a connected media server.

Please keep in mind the following when using the remote control:

• Make sure that there are no obstacles between the remote and

the remote sensor on the unit.

• The remote has a range of about 23 feet (at an angle of 30º from

either side of the sensor). Use within this range in front of the

remote control sensor on the front panel.

Photo file playback

PNG, GIF and JPEG image files — including the popular EXIF format

used by most digital cameras to store picture shooting information

together with the JPEG image — are playable from DVD-R/-RW, or

from a connected media server.

• Remote operation may become unreliable if strong sunlight or

fluorescent light is shining on the unit’s remote sensor.

• Remote controllers for different devices can interfere with each

other. Avoid using remotes for other equipment located close to

this unit.

• Windows Media™ is a trademark of Microsoft Corporation.

• This product includes technology owned by Microsoft Corporation

and cannot be used or distributed without a license from

Microsoft Licensing, Inc.

• Replace the batteries when you notice a fall off in the operating

range of the remote.

What’s in the box

• When the batteries run down or you change the batteries, the TV

preset codes are automatically reset. See Resetting the player on

page 47 to reset them.

Please confirm that the following accessories are in the box along

with these operating instructions when you open it:

• Remote control

• AA/R6P dry cell batteries x2

• Stereo audio cable (red/white plugs)

• Video cable (yellow plugs)

• LAN cable

• Power cable

• Warranty card

– This player can also play DVD discs containing PC data.

See below for the file compatibility.

Disc/content format playback compatibility

• This player cannot play DVD-Audio and DVD-RAM discs.

General disc compatibility

CD compatibility

This player is compatible with a range of disc types (media) and

formats. Compatible discs will usually feature one of the following

logos on the disc and/or disc packaging. Note however that some

disc types, such as recordable BD, DVD or CD, may be in an

unplayable format — see below for further compatibility

information.

• This player can play CD-DA discs.

• PC files stored on CDs cannot be played back.

• Regarding copy protected CDs: This product is designed to

conform to the specifications of the Audio CD format. This

player does not support the playback or function of discs that do

not conform to these specifications.

Blu-ray Disc (BD)

• The audio signals of a CD output at the DIGITAL AUDIO OUT

(COAXIAL/OPTICAL) jacks of this player are protected from

copying and cannot be copied on other external components.

DualDisc playback

DVD-Video

DVD-R

DVD-R DL

DVD-RW

A DualDisc is a new two -sided disc, one side of which contains DVD

content – video, audio, etc. – while the other side contains non-DVD

content such as digital audio material.

The DVD side of a DualDisc will play in this product (excluding any

DVD-Audio content).

The non-DVD, audio side of the disc is not compatible with this

player.

It is possible that when loading or ejecting a DualDisc, the opposite

side to that being played will be scratched. Scratched discs may not

be playable.

For more detailed information on the DualDisc specification, please

refer to the disc manufacturer or disc retailer.

• “Blu-ray Disc” and

are trademarks.

•

is a trademark of DVD Format/Logo Licensing

Corporation.

PC-created disc compatibility

Discs recorded using a personal computer may not be playable in

this unit due to the settings of the application software used to

create the disc. Check with the software publisher for more detailed

information.

• This player may not be able to play perfectly every disc that

features one of the logos listed above. Please contact Pioneer if

you find a disc that won’t play properly.

BD compatibility

Important

• This player can play BD-ROM discs.

• This player cannot play discs other than the ones listed in this

chapter.

– BD-ROM discs should conform to BD-ROM Profile 1.

• This player can play BD-R discs.

• Do not use 8 cm disc adapters with this player. 8 cm discs can

be played directly by placing then in the 8 cm disc depression in

the center of the disc tray.

– This player is compatible with Blu-ray Disc Recordable format

Ver. 2 .

– This player is not compatible with Blu-ray Disc Recordable

format Ver. 1 .

File compatibility

• This player can play BD-RE discs.

• Compatible media: DVD-R, DVD-RW, media server on network

(some formats may not be supported depending on the media

server type).

– This player is compatible with Blu-ray Disc Rewritable format

Ver. 3¹.

– This player is not compatible with Blu-ray Disc Rewritable

• Even when they are in a supported format, some files may not

play or display depending on the content.

format Ver. 1 and Ver. 2².

• This player can play 12 cm discs, but cannot play 8 cm discs.

• Even when playing a supported format, some functions may not

operate properly depending on the content.

DVD compatibility

• This player can play DVD-ROM (DVD-Video)/-R/-RW discs.

• DRM-protected contents on DVD-R/-RW discs or on media

servers that do not support WMDRM, and otherwise

incompatible files are skipped.

– This player can play DVD-R/-RW discs recorded as DVD-Video

format.

– This player cannot play unfinalized DVD discs and VR mode

DVD discs.

Note

1 The standard for recording of BDMV format data.

2 The standard for recording of BDAV format data.

3 The standard that uses the provided cartridge.

• Please note, the following file naming structure needs to be

adhered to when creating/renaming any digital media to be

played on the unit (either through computer-created disc media,

or the Home Media Gallery connection). This disclaimer does

not apply to any media purchased at retail locations: Due to the

coding system used, this player will only read/play files named

using standard alphanumeric characters. Any other characters

or symbols (e.g. characters with accents) used in naming the

file will render it unreadable/unplayable by the unit. If you

encounter any difficulties with playback of media, please

rename the file in accordance to this standard.

Even when files have a supported file extension, some files may not

play or display depending on the content or media server type.

Titles and chapters

BD and DVD movie discs are divided into one or more titles. Titles

may be further subdivided into chapters.

Title 1

Title 2

Title 3

Supported video formats

Chapter 1 Chapter 2 Chapter 3Chapter 1 Chapter 1 Chapter 2

•

Windows Media Video 9 (WMV9)

– MP@HL

DVD-Video regions

Windows Media Video 9 (WMV9) Advanced Profile (VC-1)

All commercially produced DVD movies (DVD-Video discs) carry a

region mark on the case somewhere that indicates which region(s)

of the world the disc is compatible with. This player also has a region

mark, which you can find on the rear panel. Discs from incompatible

regions will not play in this player. Discs marked ALL will play in any

player.

– AP@L3

MPEG-2 (PS/TS)

– MP@HL

MPEG-1

The diagram below shows the various DVD regions of the world.

Supported audio formats

•

Windows Media Audio 9 (WMA9)

– Bit rate: up to 192 kbps (constant bit-rate (CBR));

up to 384 kbps (variable bit-rate (VBR))

– Sampling rates: 44.1 kHz or 48 kHz

•

Windows Media Audio 9 Professional (WMA9 Pro)

– Bit rate: up to 768 kbps

– Sampling rates: 44.1 kHz or 48 kHz

– Channels: up to 5.1ch

This player is region 1.

•

MPEG-1 Audio Layer 3 (MP3)

– Sampling rates: 32 kHz, 44.1 kHz or 48 kHz

– Bit rate: up to 320 kbps

BD-ROM regions

Linear PCM (WAV)

Like DVD movies, BD movie discs (BD-ROM) also carry a region

mark that indicates which region(s) of the world the disc is compat-

ible with. This player also has a region mark, which you can find on

the rear panel. Discs from incompatible regions will not play in this

player. Discs marked ALL will play in any player.

– Sampling rates: 44.1 kHz or 48 kHz

Supported image formats

•

JPEG

– File format: JFIF or Exif

The diagram below shows the various BD-ROM regions of the world.

– Resolution: up to 4096 x 4096 pixels

Baseline JPEG and progressive JPEG are supported

•

PNG

– Resolution: up to 4096 x 4096 pixels

GIF

– Resolution: up to 4096 x 4096 pixels

Region A

Region B

Region C

File extensions

The following file extensions should be used with this player:

This player is region A.

•

Video

‘.wmv’ ‘.mpg’ ‘.mpeg’

Audio

‘.wma’ ‘.mp3’ ‘.wav’

Image

‘.jpg’ ‘.jpeg’ ‘.png’ ‘.gif’

Note

1 This player is not compatible with WMV9 Complex Profile.

^CC^ho^aptn^ern²ecting up

Rear panel

CONTROL

AUDIO OUT

(5.1ch)

AUDIO OUT

(2ch)

AC IN

CENTER SURROUND FRONT

VIDEO OUT

DIGITAL AUDIO OUT

P^B

SETTING

HDMI OUT

LAN(100)

P^R

IR RECEIVER

SUB WOOFER

COMPONENT

VIDEO OUT

COAXIAL

OPTICAL

10 11

AC IN

AUDIO OUT (5.1ch)

Connect the supplied power cord here, then plug into a power

outlet.

Multi-channel (5.1ch) analog audio outputs for connection to an AV

receiver with multi-channel analog audio inputs (page 15).

CONTROL IN

AUDIO OUT (2ch)

Use to control this player from the remote sensor of another Pioneer

component with a CONTROL OUT terminal and bearing the 

mark. Connect the CONTROL OUT of the other component to the

CONTROL IN of this player using a mini-plug cord (page 16).

Stereo analog audio outputs for connection to your TV, AV receiver

or stereo system (page 12).

10 IR IN

Jack for an external IR (infrared) remote control receiver (page 17).

HDMI OUT

11 IR RECEIVER switch

Switch to the setting compatible with your external IR remote

control receiver (page 17).

HDMI output providing a high quality interface for digital audio and

video (page 13).

LAN (100)

Ethernet port for 100BASE-TX (100 Mbps) network connection

(page 16).

Tip

• When connecting this player to your TV, AV receiver or other

equipment, make sure that all components are ‘switched off’

and ‘unplugged’.

VIDEO OUT and S-VIDEO OUT

Video output (composite) that you can connect to your TV or AV

receiver using the supplied video cable (page 12).

• You may find it useful to have the manuals supplied with your

other components handy when connecting this player.

S-Video output that you can use instead of the VIDEO OUT jacks

(page 14).

COMPONENT VIDEO OUT

High quality video output for connection to a TV, monitor or AV

receiver that has component video inputs.

Connect using a commercially available three-way component video

cable (page 13).

DIGITAL AUDIO OUT (COAXIAL/OPTICAL)

Digital audio outputs for connection to a PCM, Dolby Digital, and/or

DTS-compatible AV receiver (page 15).

Easy connections

To audio input

To video input

CONTROL

AUDIO OUT

(5.1ch)

AUDIO OUT

(2ch)

AC IN

CENTER SURROUND FRONT

VIDEO OUT

DIGITAL AUDIO OUT

P^B

SETTING

HDMI OUT

LAN(100)

P^R

IR RECEIVER

SUB WOOFER

COMPONENT

VIDEO OUT

COAXIAL

OPTICAL

To power outlet

This is a basic setup that allows you to watch discs on your TV using

just the cables supplied.

Using other types of video output

This player has standard (composite), S-Video and component video

outputs, as well as an HDMI connector (for digital video/audio).

Important

In order to be able to watch HD (high definition) BDs at their full

resolution, you should connect the player to your TV using either the

component video output, or (even better) the HDMI output.

• This player is equipped with copy protection technology. Do not

connect this player to your TV via a VCR using AV cables, as the

picture from this player will not appear properly on your TV. (This

player may also not be compatible with some combination TV/

VCRs for the same reason; refer to the manufacturer for more

information.)

An HDMI connection will additionally give you HD output when

watching DVDs.

If your display has neither of these connection types, an S-Video jack

is also provided, which should give slightly better video quality than

using the standard video output.

• Do not unplug the player from the power outlet while it is

switched on.

• Do not plug this player into a switched power supply found on

some amplifiers and AV receivers.

Connect the VIDEO OUT and one pair of AUDIO OUT (2ch)

jacks to a set of audio/video inputs on your TV.

Use the supplied red/white stereo audio and yellow video cables.

Make sure you match up the left and right audio outputs with their

corresponding inputs for correct stereo sound.

See Using other types of video output below if you want to use a

different type of connection.

Connect the supplied AC power cord to the AC IN inlet,

then plug into a power outlet.

After switching on the player you may need to set the output video

resolution and HDMI color space for compatibility with your display.

See Changing the output video resolution on page 14 and

Connecting for HDMI output

If you have an HDMI or DVI (with HDCP) equipped monitor or

display, you can connect it to this player using a commercially

available HDMI cable that supports the HDMI 1.3 specification

(Category 2) or later.

HDMI Color Space in Using the Initial Setup menu on page 41.

About HDMI

HDMI supports both standard and high-definition video, plus

standard and multi-channel surround-sound audio. HDMI features

include uncompressed digital video, one connector (instead of

several cables and connectors), and communication between the

AV source and AV devices such as DTVs.

The HDMI connector outputs uncompressed digital video, as well as

most digital audio formats.

Important

HDMI was developed to provide the technologies of High-bandwidth

Digital Content Protection (HDCP) as well as Digital Visual Interface

(DVI) in one specification. HDCP is used to protect digital content

transmitted and received by DVI-compliant displays.

• This unit has been designed to be compliant with HDMI

(High-Definition Multimedia Interface). Depending on the

component you have connected, using a DVI connection may

result in unreliable signal transfers.

• If you change the display connected to the HDMI output, you will

also need to change the output video resolution settings to

match the new display (see Changing the output video resolution

on page 14 to do this).

About HDMI Control

You can enable HDMI Control by turning the HDMI Control setting

to On for all components connected via HDMI cable. Check the

video output from this unit once you have completed making

connections and settings for all components. You will need to check

the video output each time you change connected components or

remove the HDMI cable.

• The HDMI connection is compatible with 8-channel linear PCM

signals (44.1 kHz to 192 kHz , 16 bit/20 bit/24 bit), Dolby Digital,

Dolby TrueHD, Dolby Digital Plus, DTS-HD High Resolution

Audio and DTS (5.1 channel signals) bitstreams.

The HDMI Control functions may not operate properly if you do not

use an HDMI cable that supports the HDMI 1.3 specification

(Category 2) or later.

• Depending on the HDMI cable being used, 1080p output may

not appear correctly.

• If you connect a DVI device to the HDMI output of this player,

ensure that it is compliant with High-bandwidth Digital Content

Protection (HDCP). If you choose to connect to a DVI connector,

you will need a separate adaptor (DVIHDMI) to do so. A DVI

connection, however, does not support audio signals. Consult

your local audio dealer for more information.

Connecting using the component video

output

You can use the component video output instead of the standard

video out jack to connect this player to your TV (or other equipment).

•

Use an HDMI cable (not supplied) to connect the HDMI OUT

•

Use a component video cable (not supplied) to connect the

interconnect on this player to an HDMI interconnect on an

HDMI-compatible display.

COMPONENT VIDEO OUT jacks to a component video input on

your TV, monitor or AV receiver.

Be careful to match up the colors of the three jacks for correct

connection.

To HDMI

interconnect

To component

video input

HDMI-compatible display

CONTROL

AUDIO OUT

(5.1ch)

AUDIO OUT

(2ch)

CENTER SURROUND FRONT

VIDEO OUT

DIGITAL AUDIO OUT

SETTING

HDMI OUT

LAN(100)

IR RECEIVER

SUB WOOFER

CONTROL

COMPONENT

VIDEO OUT

COAXIAL

OPTICAL

AUDIO OUT

(5.1ch)

AUDIO OUT

(2ch)

CENTER SURROUND FRONT

VIDEO OUT

DIGITAL AUDIO OUT

P^B

SETTING

HDMI OUT

LAN(100)

• The arrow on the cable connector body should be face up for

correct alignment with the connector on the player.

P^R

IR RECEIVER

SUB WOOFER

COMPONENT

VIDEO OUT

COAXIAL

OPTICAL

Note

1 There are some restrictions depending on the sampling rate. For more information see About the audio output settings on page 44.

24p output

Changing the output video resolution

For smooth presentation of 1080/24p or 720/24p video with an

HDMI-equipped display compatible with 1080/24p input, set

24p Direct Out (page 41) on this player to On.

Use the OUTPUT RESOLUTION button located on both the front

panel and the remote control to switch the output video resolution

for the HDMI and component video outputs.

This player will output 1080/24p video over HDMI in the following

cases:

The table below shows the output settings.

• 1080/24p video: When the output video resolution is set to Auto

or Source Direct.

Component

output

Video/S-Video

output

Setting

AUTO

HDMI output

• 720/24p video: When the output video resolution is set to Auto.

TV’s preferred

resolution^1,2

TV’s preferred

resolution³

480/60i

Note

480i

480/60i

480/60p

720/60p

1080/60i

480/60i

• Even when 24p Direct Out is set to On, if a TV not compatible

with 1080/24p video is connected, the actual frame frequency of

the video output will be 60 Hz.

480p

720p

1080i

480/60p

720/60p ^4,5

• The video output will be interrupted when switching the video

output from 1080/24p or 720/24p to other output video

resolutions, or when switching to 1080/24p or 720/24p from

more on these connections.

After connecting, you can make settings for the number of speakers

connected to your system — see the Speakers section of the Initial

Setup menu on page 43 and Speaker Setup on page 45.

Digital connections

To multi-channel

input

•

Connect one of the DIGITAL AUDIO OUT (COAXIAL/

OPTICAL) jacks on this player to a digital input on your AV

receiver.

AV receiver

To coaxial/optical

digital input

AV receiver

CONTROL

AUDIO OUT

(5.1ch)

AUDIO OUT

(2ch)

CENTER SURROUND FRONT

VIDEO OUT

AUDIO OUT

(5.1ch)

AUDIO OUT

(2ch)

DIGITAL AUDIO OUT

P^B

SETTING

HDMI OUT

LAN(100)

CENTER SURROUND FRONT

VIDEO OUT

DIGITAL AUDIO OUT

P^R

IR RECEIVER

P^B

SETTING

HDMI OUT

LAN(100)

SUB WOOFER

COMPONENT

VIDEO OUT

COAXIAL

OPTICAL

P^R

IR RECEIVER

SUB WOOFER

COMPONENT

VIDEO OUT

COAXIAL

OPTICAL

Optical connection: Use an optical cable (not supplied) to connect

the DIGITAL AUDIO OUT OPTICAL jack to an optical input on your

AV receiver.

• When inserting the plug, the protective shutter will open and

you should hear the plug click into position when fully inserted.

Take care not to force the plug as this may damage the shutter,

the cable and/or the player.

Coaxial connection: Use a coaxial cable (not supplied) to connect

the DIGITAL AUDIO OUT COAXIAL jack to a coaxial input on your

AV receiver.

Note

• Linear PCM audio output over the DIGITAL AUDIO OUT

(COAXIAL/OPTICAL) jacks is limited to 2ch, 48 kHz.

Connecting directly to a PC

If you only need to use one PC to act as a media server, you can

connect this player directly to the PC using the included LAN cable.

Network connection

This player can be connected to a local area network (LAN) via the

Ethernet port on the rear panel.

CONTROL

After making the physical connection the player needs to be set up

for network communication. This is done from the Initial Setup

menu — see Setting up for network use on page 21 for detailed

instructions.

AUDIO OUT

(5.1ch)

AUDIO OUT

(2ch)

CENTER SURROUND FRONT

VIDEO OUT

DIGITAL AUDIO OUT

P^B

SETTING

HDMI OUT

LAN(100)

P^R

IR RECEIVER

SUB WOOFER

COMPONENT

VIDEO OUT

COAXIAL

OPTICAL

For best performance, we recommend using a 100BASE-TX

compatible PC and Ethernet hub.

Connecting via an Ethernet hub

If you already operate one or more PCs on a local area network, you

can integrate this player by connecting it to the Ethernet hub using

the included LAN cable.

LAN(10/100)

In the example configuration below, this player would be able to

access content from either of the PCs.

CONTROL

AUDIO OUT

(5.1ch)

AUDIO OUT

(2ch)

CENTER SURROUND FRONT

VIDEO OUT

DIGITAL AUDIO OUT

SETTING

HDMI OUT

LAN(100)

IR RECEIVER

SUB WOOFER

COMPONENT

VIDEO OUT

COAXIAL

OPTICAL

Controlling this player via another Pioneer

component

The CONTROL IN jack allows you to control this player via the

remote control sensor of another Pioneer component — typically an

AV receiver — that has a CONTROL OUT jack. Remote control

signals are passed through to the player from the remote sensor of

the other component, allowing you greater freedom in the

placement of your player.

Ethernet hub

(router with hub functionality)

•

Use a miniplug cord (not supplied) to connect the CONTROL

IN jack of this player with the CONTROL OUT jack of your other

Pioneer component.

LAN(10/100)

To CONTROL OUT

AV Receiver

PC 1

PC 2

CONTROL

AUDIO OUT

(5.1ch)

AUDIO OUT

(2ch)

CENTER SURROUND FRONT

VIDEO OUT

DIGITAL AUDIO OUT

P^B

SETTING

HDMI OUT

LAN(100)

P^R

IR RECEIVER

SUB WOOFER

COMPONENT

VIDEO OUT

COAXIAL

OPTICAL

• You will also need to connect a coaxial digital cable, analog

audio cable, or video cable.

• When connected via System Control, point the remote control

toward the connected component (such as an AV receiver). The

remote will not work correctly when pointed at this unit.

• You cannot connect use System Control with components that

do not have a System Control jack or with components

manufactured by companies other than Pioneer.

Using an external IR receiver with this player

If you prefer to keep your AV equipment in a closed cabinet, you can

use an external IR receiver connected to the IR IN jack. You can thus

have just the receiver outside of the cabinet and still be able to

control the player.

IR receiver

CONTROL

AUDIO OUT

(5.1ch)

AUDIO OUT

(2ch)

CENTER SURROUND FRONT

VIDEO OUT

DIGITAL AUDIO OUT

P^B

SETTING

HDMI OUT

LAN(100)

P^R

IR RECEIVER

SUB WOOFER

COMPONENT

VIDEO OUT

COAXIAL

OPTICAL

Tip

• You may need to set the IR RECEIVER switch (located under the

IR IN jack) for this player to recognize the IR receiver correctly.

• This player does not supply power to the external IR receiver.

Please see the operating instructions of the IR receiver for the

power requirements.

Chapter 3

Controls and displays

Front panel

 STANDBY/ON

 (play)

Press to switch the player on (the power indicator and indicator in

the middle of the unit light up when the power is on) or into standby.

Press to start or resume playback.

 (stop)

Disc tray

Press to stop playback (you can resume playback by pressing ).

 OPEN/CLOSE

8  (pause)

Press to open or close the disc tray.

Press to pause playback. Press again to restart.

Indicators

Skip/scan buttons

• FL OFF – Lights when the display and other indicators are

switched off.

•   – Press to jump to the next chapter, track, etc. Press

and hold for fast forward scanning.

• HD – Lights when the video output is 720p, 1080i or 1080p

(HDMI), or 720p or 1080i (component).

•   – Press to jump back to the beginning of the current

chapter, track, etc. then to previous chapters, tracks, etc. Press

and hold for fast reverse scanning.

• LAN – Lights when there is an active local area network (LAN)

connection.

10 OUTPUT RESOLUTION

• HDMI – Lights when a device is connected via HDMI.

Press to switch the output resolution over HDMI and component

video outputs. See Changing the output video resolution on page 14.

Display

Shows disc status and playback information.

Front panel display



Lights during playback of a disc.

Character display

Shows various playback information — disc time, chapter and title

number, etc.

DISPLAY

Remote control

Press to display information (see page 25).

10 ANGLE

Press to change the camera angle during BD-ROM or DVD-Video

movie multi-angle scene playback (see page 25).

STANDBY/ON FL

DIMMER

OPEN/CLOSE





11 DISC NAVIGATOR/TOP MENU

Press to display the top menu of a BD-ROM or DVD-Video disc.

When playing a DVD-R/-RW disc, press to display/exit the Disc

Navigator.

HOME MEDIA

GALLERY

12 POPUP MENU/MENU

BD-ROM: Press to display/hide the pop-up menu.

DVD-Video: Press to display the disc menu (if there is one).

CLEAR

AUDIO

ENTER

OUTPUT

RESOLUTION

SUBTITLE ANGLE

DISPLAY

13 /// and ENTER

Use to navigate on-screen displays and menus. Press ENTER to

select an option or execute a command.

POPUP MENU

DISC NAVIGATOR

TOP MENU

14 HOME MENU

Press to display the player’s Home Menu, from which you can

access most of the player’s functions.

ENTER

HOME

RETURN

YELLOW

15 RETURN

Press to return to a previous screen.

RED

GREEN

BLUE

16 Red/Green/Blue/Yellow

Use to navigate BD-ROM menus.

17 Playback controls

PLAY MODE

PHOTO ZOOM

 : Press to start reverse/forward scanning.

: Press to start or resume playback.

: Press to pause playback; press again to restart.

VIDEO

ADJUST

TV CONTROL



INPUT

SELECT

CHANNEL VOLUME

: Press to stop playback (you can resume playback by pressing

).

 : Press to jump to the start of the previous/next chapter/

track.

BD PLAYER

 /

: Use for slow motion and step frame (see

 STANDBY/ON

page 24).

Press to switch the player on or into standby.

18 PLAY MODE

Press to change the Play Mode (repeat play, for example) (see

page 24).

 OPEN/CLOSE

Press to open or close the disc tray.

FL DIMMER

19 PHOTO ZOOM

Press to zoom the screen when displaying a still image (see

page 25).

Press to change the brightness of the display. When the display and

other indicators are off, the FL OFF indicator (page 18) lights.

Number buttons

Use to enter title, chapter or track numbers, etc.

20 VIDEO ADJUST

Press to display the Video Adjust screen (see page 39).

CLEAR: Press to clear a numeric entry, etc.

ENTER: Press to select an option or execute a command.

HOME MEDIA GALLERY

21 TV CONTROL buttons

See also Setting up the remote to control your TV on page 48.

: Press  to turn the TV on or into standby.

VOLUME +/–: Use to adjust the volume.

Press to display the Home Media Gallery screen (see page 32).

OUTPUT RESOLUTION

CHANNEL +/–: Use to select TV channel.

Press to switch the output resolution over HDMI and component

video outputs (see pages 14 and 25).

INPUT SELECT: Press to change the input function of the TV.

AUDIO

Press to select the audio channel or language (see page 25).

SUBTITLE

Press to select a subtitle display (see page 25).

Chapter 4

Getting Started

Switching on and setting up

Press ENTER to start setting up using the Setup Navigator.

Setup Navigator

When you switch the player on for the first time the Setup Navigator

screen appears. We recommend using this to make a few basic

player settings.

Before using, make some simple

settings for the BD player.

Start

Cancel

Please use the Initial Setup if you

want to make more detailed settings.

STANDBY/ON





If you don’t want to use the Setup Navigator, press  to select

Cancel, then press ENTER to exit the Setup Navigator.

Use the / buttons to select the output video resolution

then press ENTER.

Setup Navigator

Output Video Resolution

Auto

480i

ENTER

480p

720p

1080i

1080p

Source Direct

Switch on your TV and set the video input to this player.

If you connected this player to your TV using the HDMI connector,

select from Auto, 480i (interlaced), 480p (progressive), 720p,

1080i, 1080p, or Source Direct, then skip to step 7 (the aspect ratio

will automatically be set to 16:9 (Widescreen)). Generally, the Auto

setting is recommended.

Press the  STANDBY/ON button on the remote control or

the front panel to switch on.

• It can take up to one minute for the unit to turn on.

• When you switch on for the first time, your TV should display the

Setup Navigator screen. (If the Setup Navigator doesn’t appear,

you can also access it from the Initial Setup menu; see page 43).

Setup Navigator

Output Video Resolution

• When you have this unit connected to a plasma display that is

compatible with HDMI Control, language settings are imported

from the plasma display’s OSD settings before Setup Navigator

begins.

S-Video/Video only

480i

480p

720p

1080i

Don't Know

Use the / buttons to choose a language, then press

If you’re using an S-Video or composite video connection, select S-

Video/Video only.

ENTER.

Setup Navigator

If you’re using a component video connection, match the output

setting with the capabilities of your TV. Select from: 480i, 480p,

720p, 1080i or Don’t Know. If you select 720p or 1080i, skip the

next step since the aspect ratio will automatically be set to

16:9 (Widescreen).

Language

English

français

Español

Use the / buttons to select the aspect ratio of your TV

then press ENTER.

Setup Navigator

TV Aspect Ratio

16:9 (Widescreen)

4:3 (Standard)

If you have a widescreen TV, select 16:9 (Widescreen); if you have a

standard size TV, select 4:3 (Standard).

Select ‘Finish Setup’ to accept the settings and exit the

Use the on-screen keypad to enter a name for the player.

Setup Navigator, or ‘Go Back’ to go through the settings again.

This is how the player will appear to connected devices on the local

area network.

Setup Navigator

Device

name input

Setup is complete!

Enjoy using your BD player!

Finish Setup

Go Back

SHFT

SPC

DEL

CLR

You can run the Setup Navigator at any time by selecting it from the

Options menu — see page 43.

• Use the /// buttons and ENTER to select characters

About the screen saver

If the player is stopped or paused for more than five minutes with no

other operation, the screen saver starts.

from the keypad.

• Select SHFT to toggle between upper and lower case.

• Select SPC to insert a space.

Once the screen saver has started, pressing any button on the front

panel or remote will clear it and return the player to normal

operation.

• Select DEL to delete the character at the current cursor position

in the name field.

The screen saver starts for CDs and music files after five minutes

pass without any commands input, whether or not playback has

been paused or stopped.

• Select CLR to clear the name field.

Select ‘DONE’ to register the name and exit the input

screen.

Select CANCEL to close the keypad without registering the name.

Using the on-screen displays

Select ‘IP Configuration’ then ‘Next Screen’ to display the

IP configuration screen.

This player makes extensive use of graphical on-screen displays

(OSDs). You should get used to the way these work as you’ll need to

use them when setting up the player, using some of the playback

features, and when making more advanced settings for audio and

video.

Initial Setup

Video Out

Audio Out

Language

Parental Lock

Network

IP Configuration

Auto set IP Address

Off

All the screens are navigated in basically the same way, using the

cursor buttons (///) to change the highlighted item and

pressing ENTER to select it.

IP Address

192 255 255

Subnet mask

Default gateway

255 255 255

Speakers

Options

192 168

Set the IP address.

Button

What it does

Display/exit the on-screen display

HOME MENU

///

ENTER

Set ‘Auto set IP Address’ to ‘On’.

If there is a DHCP server on the local area network (LAN), this player

will automatically be allocated an IP address. If you’re using a

broadband router or broadband modem that has a DHCP (Dynamic

Host Configuration Protocol) server function, select On. The IP

address will automatically be determined.

Changes the highlighted menu item

Selects the highlighted menu item

Returns to the previous menu or screen without

saving changes

RETURN

If there is no DHCP server on the network and you select On, this

player will use its own Auto IP function to determine the IP address.

Tip

• If you want to set the IP address manually, select Off then set

the IP Address, Subnet mask and Default gateway: Use the /

// buttons to select a field; use the number buttons to

enter a value. Press ENTER to finish and exit the screen.

• Information at the bottom of an OSD screen explains the

currently selected menu item and shows which buttons can be

used for that screen.

Press HOME MENU to exit the Initial Setup menu.

Setting up for network use

You should now be able to use the Home Media Gallery (accessible

from the Home Menu). See Using the Home Media Gallery on

page 32 for more.

If you’ve connected this player to a local area network (LAN) you may

need to make a few settings before you can use the Home Media

Gallery feature over the network.

• For information on DHCP refer to the network device’s operating

instructions.

• You may need to contact your service provider or network

administrator when manually entering an IP address.

Press HOME MENU and select ‘Initial Setup’.

Select ‘Network’.

Select ‘Device Name’ then ‘Next Screen’.

When playing BD-ROM discs:

Playing movies, music and photos

• Commercially produced BD-ROM movie discs often go straight

to the disc menu when playback is started (sometimes preceded

by an opening sequence). Navigate through the disc menu

using the cursor keys (///) and the ENTER button. You

can also use the number buttons to select numbered items in

some menus.

Using this player, you can enjoy watching movies, listening to music

and browsing photos, from DVD discs or from a media server on the

network. How you navigate, browse and play content varies

according to the format of the content and the media:

• To play a DVD movie disc (i.e., one containing DVD-Video

application format), see Playing BD/DVD movies and Audio CD

below.

• To get back to the top menu, press TOP MENU.

• Some BD-ROM discs feature pop-up menus that do not

interrupt playback; press POPUP MENU/MENU to access

these.

• To play a DVD-R/-RW disc recorded with movie, music or photo

files, turn to Using the Disc Navigator on page 27.

When playing DVD-Video discs:

• To play content from a media server, please refer to Using the

Home Media Gallery on page 32.

• Commercially produced DVD movies often go straight to the

disc menu when playback is started (sometimes preceded by an

opening sequence). Navigate the disc menu using the cursor

(///) and ENTER buttons. You can also use the number

buttons to select numbered items in some menus.

Playing BD/DVD movies and Audio CD

The basic playback controls for playing BD/DVD movies and Audio

CD discs are covered here. Further functions are detailed in the next

chapter.

• To get back to the top menu, press TOP MENU.

• To get back to the disc menu, press POPUP MENU/MENU.

When playing Audio CDs:

• For more information see Playback controls on page 23.

STANDBY/ON

OPEN/CLOSE



When you’ve finished using the player, eject the disc and



switch the player back into standby.

• To open/close the disc tray, press  OPEN/CLOSE. Remove the

disc before putting the player into standby.

• Press  STANDBY/ON to switch the player into standby.

POPUP MENU

TOP MENU

ENTER

If the player isn’t already on, press  STANDBY/ON to

switch it on.

Also turn on your TV and make sure that it is set to the correct video

input.

Press  OPEN/CLOSE to open the disc tray.

Load a disc.

Load a disc with the label side facing up, using the disc tray guide

to align the disc (if you’re loading a double-sided DVD-Video disc,

load it with the side you want to play face down).

The player will take a short while to read the disc, after which the

disc type will show up in the front panel display.

Press  to start playback.

• Use the  (pause) and buttons to pause or stop playback. You

can resume playback in either case by pressing . See also

Resuming playback on page 23.

• See Playback controls on page 23 for other controls available

during playback.

• Some actions in the Disc Navigator/Home Media Gallery (such

as changing the Browse category) will cause the resume

position to be lost.

Playback controls

Scanning video and audio

CLEAR

ENTER

You can fast-scan BD/DVD movies or Audio CDs, forward or

backward at various speeds.

OUTPUT

RESOLUTION

AUDIO

SUBTITLE ANGLE

DISPLAY

During playback, press  or  to start scanning.

There is no sound while scanning video and audio.

Press repeatedly to increase the scanning speed.

The scanning speed is shown on-screen.

To resume normal playback, press .

Depending on the disc, normal playback may automatically resume

when a new chapter is reached on a BD/DVD movie disc.

Selecting titles, chapters and tracks directly

PLAY MODE

PHOTO ZOOM

CLEAR

ENTER

Resuming playback



You can select titles, chapters and tracks directly with BD, DVD

movies and Audio CDs .

The resume function offers a convenient way to restart playback

from where you stopped it previously.

•

Use the number buttons to select a title, chapter or track.

• If the disc is stopped, playback starts from the selected title or

track.

Resuming playback of BD/DVD movies and Audio CDs

If you stop playback before the end of the disc, the playback stop

position is stored so that you can resume watching the disc from the

same place later.

• If the disc is playing, playback jumps to the start of the selected

chapter or track.

• To resume playback, press . Playback will start from the stored

resume position. For Audio CDs, playback resumes from the

beginning of the track.

Skipping content

• Press  again to cancel the resume function.

You can skip over content during playback of BD and DVD movies,

Audio CDs, movie and song files, and photo slideshows.

Note

•

During playback, press  or  to skip content.

• When playing a BD or DVD movie, playback jumps to the start of

the previous/next title, chapter or track. (If the disc is stopped,

playback will start.)

In the following case, the resume position is cleared:

• Eject the disc.

• Use Home Media Gallery/Disc Navigator.

• Switch the player off (DVD resume position remains saved).

• During movie or song file playback, the previous or next file will

start playing.

• Certain BD-ROM discs cannot be restarted from the position in

which they are paused.

• During photo slideshow playback, you can skip to the previous

or next photo.

Resuming playback of movie, music and photo files

Movie and music files are resumed from the start of the title/track

(rather than the stop position within the title/track): photo slideshow

playback is resumed from the photo file within the slideshow.

• If you interrupt playback of a movie or slideshow by pressing

RETURN to display the Disc Navigator or Home Media Gallery

screen, you can still resume playback of the same title/

slideshow photo using the  button, regardless of what is

highlighted on the screen. (Use the ENTER button to start

playback of the currently highlighted item in the Disc Navigator/

Home Media Gallery.)

Note

1 With some titles on BD-ROM or DVD-Video discs it is not possible to jump to the start of the selected title or chapter.

Play Mode option compatibility

Playing video in slow motion

The available options depend on what kind of disc/file is playing

(=available/=unavailable):

You can play BD and DVD movies at different forward slow motion

speeds.

Disc/file type

Play Mode

DVD

PC File

Audio

Option

BD-ROM

-Video (Music) (Movie) (Photo)

During playback, press  to start slow motion playback.

• The slow motion speed is shown on-screen.

Time Search

Title Search

Repeat Chapter

Repeat Title

Repeat Track

Repeat All































• There is no sound during slow motion playback.

Press repeatedly to change the slow motion speed.

To resume normal playback, press .

Depending on the disc, normal playback may automatically resume

when a new chapter is reached.

Random

Video step forward and step reverse

Repeat Off



You can use step forward and step reverse when playing a BD or

DVD movie.

Using time search

During playback, press  (pause).

Press or to move the video forward or back one step.

To resume normal playback, press .

CLEAR

ENTER

When playing a BD or DVD movie, normal playback may

automatically resume when a new chapter is reached.

You can navigate directly to a certain point in a BD or DVD movie, or

in a movie file.

1,2

Changing the Play Mode

PLAY MODE

During playback, press PLAY MODE and select ‘Time

Search’.

Use the number buttons to enter a time in hours, minutes

Use the PLAY MODE button on the remote control to select one of

the various playback modes for BD and DVD movie discs, Audio CD

discs, movie and music files and photo slideshows.

and seconds for playback to resume from.

For a BD or DVD movie, the time you enter should be the time into

the currently playing title. For a movie file it will be the playback time

into the file.

You can’t select a Play Mode while a BD or DVD disc menu is being

displayed, or while playing some BD/DVD movie titles, Audio CD, or

movie and music files and photo slideshows.

• For example, press 4, 5, 0, 0 to have playback start from 45

minutes into the title/file. For 1 hour, 20 minutes, press 1, 2, 0,

0, 0.

•

During playback, press PLAY MODE to change the Play

• Press CLEAR to clear the input.

Mode.

See Play Mode option compatibility below for the options available

with the disc/file you’re playing.

Press ENTER to start playback from the time you entered.

Using title search

•

Time Search (see Using time search below)

Title Search (see Using title search below)

•

Repeat Chapter (repeats the current chapter)

Repeat Title (repeats the current title)

Repeat Track (repeats the current track)

CLEAR

ENTER

You can directly jump to the start of any title on a BD-ROM or

DVD-Video.

1,2

During playback, press PLAY MODE and select ‘Title

•

Repeat All (repeats the current browse list)

Search’.

Random (play tracks from an Audio CD, music files, or

photo files in a random order)

Use the number buttons to select a title.

Press CLEAR to clear the input.

• Repeat Off (cancels the repeat and random modes)

Press ENTER to start playback of the title you selected.

The current Play Mode is displayed on-screen. Press CLEAR to

resume normal playback.

Note

1 With some BD-ROM and DVD-Video titles, it is not possible to select any Play Mode options.

2 This function may not be supported depending on the content or server software.

• There may be a short delay after pressing the button for the

audio channel to change.

Switching camera angles

ANGLE

Some BD and DVD movies feature scenes shot from two or more

angles — check the disc box for details.

Tip

• Even when multiple audio streams are included in a movie file,

you cannot select from among them while playing back of a

movie file.

•

During playback, press

ANGLE to switch the angle.

• There may be a short delay after pressing the button before the

angle changes.

• To set audio language preferences, see page 42.

• Playback resumes if the angle is changed while paused.

Displaying disc or file information

DISPLAY

Zooming the screen

PHOTO ZOOM

Various track, chapter and title information, as well as the video

transmission rate for DVD and BD movies, can be displayed

on-screen. The information available depends on the type disc or

file, and whether it’s playing or stopped.

During playback of a photo slideshow you can zoom the screen to

2x view or 4x view.

During playback, press PHOTO ZOOM to change the zoom.

•

Press DISPLAY to show/switch the information displayed.

Press repeatedly to cycle through: normal  2x zoom  4x zoom.

Press DISPLAY repeatedly to change the displayed information.

Use the cursor keys (///) to move the zoomed area

Play

DVD-VIDEO

1–2

Chapter

Title Total

0 . 03 . 10

1h 28m 03s

Repeat Chapter

of the screen.

The zoom mode is canceled when you stop playback.

DVD-Video Play display 1

Switching subtitles

SUBTITLE

Play

1–2

0 . 03 . 12

Repeat Chapter

DVD-VIDEO

Chapter Time 0 . 02 . 43

Chapter Total 0 . 03 . 16

10 . 08 Mbps

Some BD and DVD movie discs have subtitles in one or more

languages; the disc box will usually tell you which subtitle

languages are available.

DVD-Video Play display 2

Switching the output video resolution

Press

SUBTITLE repeatedly to select a subtitle option.

The current subtitle language/option is displayed on-screen and in

the front panel display.

Subtitle

1/2

English

OUTPUT

RESOLUTION

You can switch the output video resolution for HDMI and

component output.

To switch the subtitle display off, press

SUBTITLE then

CLEAR.

There may be a short delay after pressing the button before the

subtitles change.

•

Press OUTPUT RESOLUTION repeatedly to select an output

video resolution.

The current source and output video resolution are shown

on-screen.

Tip

Output Video Resolution: Source Direct

(1080 / 24p)

Source: 1080 / 24p

• To set subtitle language preferences, see page 42.

Switching audio streams/channels

Note

AUDIO

• Depending on your display, some of the settings may result in

the picture disappearing. In this case, press

OUTPUT RESOLUTION repeatedly until the picture re-appears.

Some BD and DVD movie discs contain multiple audio streams that

you can select on playback. These might be different audio

languages and/or different audio formats (such as a DTS

5.1-channel sound track and a Dolby Digital 2-channel sound track).

• See Changing the output video resolution on page 14 for more

information.

•

Press

AUDIO repeatedly to select an audio channel/

stream option.

The current option is shown on-screen.

Audio:

1/2 Dolby Digital 2/0ch

English

Switching audio languages on a BD/DVD movie

Note

1 Some discs only allow you to change the subtitle language from the disc menu. Press POPUP MENU/MENU to access.

2 Some discs only allow you to change the audio language from the disc menu. Press POPUP MENU/MENU to access.

3 There may be instances with some discs where no information can be displayed.

• My AV receiver is definitely compatible with 96 kHz Linear PCM

audio, but it doesn’t seem to work with this player. What’s wrong?

Frequently Asked Questions

192 kHz/96 kHz BD and 96 kHz DVD discs only output digital

audio downsampled to 48 kHz through the optical and coaxial

outputs.

• Why won’t the disc I loaded play?

First check that you loaded the disc the right way up (label side

up), and that it’s clean and not damaged. See Taking care of your

player and discs on page 46 for information on cleaning discs.

96 kHz 7.1ch BD discs only output digital audio downsampled to

48 kHz through HDMI output when video output is 480i or 480p

over HDMI. These are not malfunctions.

If a disc loaded correctly won’t play, it’s probably an

incompatible format or disc type. See Disc/content format

playback compatibility on page 9 for more on disc compatibility.

• Why is the mono audio on some discs rather quiet compared to

other discs?

When mono audio is split into the L and R channels, there may

be a small loss of volume.

• There’s no picture!

Your TV is probably not compatible with the selected video

output resolution. Check your TV for compatibility with

progressive scan video and higher resolutions. Press the

OUTPUT RESOLUTION button to switch the video output. See

also Changing the output video resolution on page 14.

• There’s no sound when connected using HDMI!

You won’t hear any sound from the HDMI output if your

component is only DVI/HDCP-compatible.

• I can’t see any picture, or get high definition video output when

playing some BDs!

• I can’t connect to my local area network!

First of all check the settings of the media server you’re using.

Make sure that if you made the network settings automatically

on this player then you also select auto setup on the server.

(Likewise, if you made the settings manually on the server, you

should set up this player manually.)

When playing some discs, there may be no composite video,

S-Video and/or component video output, or high-definition

content may be converted to standard-definition 480i or 480p

component output. This is for content protection. To view the

disc, connect the player to an HDMI-compatible display. See

Connecting for HDMI output on page 13.

• I have a widescreen TV so why are there black bars at the top and

bottom of the screen when I play some discs?

Some movie formats are such that even when played on a

widescreen TV, black bars appear at the top and bottom of the

screen. This is not a malfunction.

• I’ve connected to a HDMI/DVI compatible component but I can’t

get any signal and the front panel HDMI indicator won’t light!

Make sure that you’ve selected this player as the HDMI input in

the settings for the component you’re using. You may need to

refer to the instruction manual of the component to do this.

An HDMI connection can only be made with other HDMI

components, or a High-bandwidth Digital Content Protection

(HDCP)-compatible DVI component. See Connecting for HDMI

output on page 13 for more on HDMI compatibility.

• There’s no picture from the HDMI output!

Make sure the output resolution of this player matches that of

the component you have connected using HDMI. See Changing

the output video resolution on page 14.

• Why is the playback sample rate of the DVD only 48 kHz instead of

96 kHz?

Playback sample rate of the audio is downsampled to 48 kHz.

Chapter 5

Using the Disc Navigator

Use the Disc Navigator to browse through the PC files on a DVD-R/

-RW disc to find what you want to play. You can use the Disc

Navigator when a disc is playing or stopped.

Movie Navigator

The movie section of the Disc Navigator allows you to browse and

play all the compatible movie files stored on the loaded DVD-R/-RW

disc (non-movie files are not displayed).

Important

See also File compatibility on page 9 for more on compatible file

types.

• It’s not possible to use the Disc Navigator with DVD-Video discs,

or with Audio CDs.

If you haven’t already done so, select ‘Disc Navigator’ from

Introduction

the Home Menu, then ‘Movies’.

You should see a list of all the movie files found on the disc, together

with their playing times.

Most of the features described in this chapter make use of

on-screen displays. Navigate these using the /// and

ENTER. To go back to the previous menu or screen, use the RETURN

button. The button guide at the bottom of every screen shows which

buttons do what.

20 items

All Movies

Scallop-man 3

Closer

1:31

1:02

1:31

1:25

1:33

1:26

1:57

1:36

1:18

Discount store

School of legend

Advance in the future part-2

The EEL

Date: 2006

Genre: Action

Format:WMV

World Baseball

Dream on the way

Finding a southpaw

Dear Customer

DISC NAVIGATOR

TOP MENU

• When the movie length cannot be determined, it is displayed as

“-:--”.

ENTER

HOME

RETURN

Use the / buttons to change the current selection

(highlighted in yellow).

On the left side of the screen you can see file information, such as

the genre, date and file format, for the current selection.

Press ENTER to play the currently highlighted movie.

Press HOME MENU and select ‘Disc Navigator’ from the

Press  to start or resume playback from the last title played.

on-screen display.

Alternatively, press DISC NAVIGATOR.

Displaying the Movie Options menu

Home Menu

•

Press  to display the Movie Options menu:

Disc Navigator

Home Media Gallery

Video/Audio Adjust

Initial Setup

20 items

All Movies

Scallop-man 3

Closer

Movie Options

Play from Beginning

Add to Quicklist

Discount store

School of legend

Advance in the future part-2

The EEL

Date: 2006

Genre: Action

Format:WMV

World Baseball

Dream on the way

Finding a southpaw

Dear Customer

Select ‘Movies’, ‘Photos’ or ‘Music’.

See the sections below for more information on each of these.

• Play from Beginning: Play the selected movie from the

beginning.

Disc Navigator

•

Add to Quicklist: Add the selected movie to your Quicklist. The

Quicklist feature is a useful way to organize movie files for handy

selection and playback. The Quicklist can contain up to 25 movies.

Movies

Photos

Music

Press HOME MENU to exit the Disc Navigator screen.

Note

1 Quicklists are lost when you exit Movie Navigator.

Searching movies

Displaying the browse menu

From the Search sub-menu you can enter a few (up to 20) characters

of a movie title or genre. As each character is entered into the

search field the search results are dynamically updated, narrowing

down the list of movies until you can see the one you’re looking for.

•

Press  to display the browse menu:

20 items

All Movies

Scallop-man 3

1:31

1:02

1:31

1:25

1:33

1:26

1:57

1:36

1:18

Closer

Loading ...

Discount store

School of legend

Advance in the future part-2

Search Results

4 items

Scallop-man 3

Say No

1:31

1:02

1:31

1:33

All Movies

The EEL

Browse

School of legend

Seesaw

World Baseball

Sort

Dream on the way

Finding a southpaw

Dear Customer

S _

Depending on the browse menu, certain options may not be

selectable.

Enter

Home Menu

Exit

Select

• All Movies: Display all movie files found on the disc.

• Use the /// and ENTER buttons to select characters

from the keypad.

• Browse: Browse movies by Genre, Quicklist, or Folders. See

also Browsing movies below.

• Select SHFT to toggle between upper and lower case.

• Search: Find a movie by entering a name (or a few letters) to

search for. The search results are narrowed down as you enter

more letters. See also Searching movies below.

• Select SPC to insert a space.

• Select DEL to delete the character at the current cursor position

in the search field.

• Sort: Sort movies by date (oldest first or most recent first) or

alphabetically by title or genre (‘A’ first or ‘Z’ first).

• Select CLR to clear the search field.

• Select DONE to close the keypad and select movies or genres

from the search results; select CANCEL to close the keypad and

clear the search results.

Browsing movies

The browse sub-menu gives you three ways to browse movies.

All Movies

20 items

Photo Navigator

Scallop-man 3

Closer

1:31

1:02

1:31

1:25

1:33

1:26

1:57

1:36

1:18

Discount store

School of legend

Advance in the future part-2

The EEL

The photo section of the Disc Navigator allows you to browse and

display all the compatible photo files found on the loaded DVD-R/

-RW disc (non-photo files are not displayed).

Go back

Genres

Quicklist

Folders

World Baseball

Dream on the way

Finding a southpaw

Dear Customer

See also File compatibility on page 9 for more on compatible file

types.

• Go back: Return to the previous menu.

If you haven’t already done so, select ‘Disc Navigator’ from

the Home Menu, then ‘Photos’.

You should see a list of folders/photo files from the disc.

• Genre: Display all movie genres and how many movies are in

each one. Select a genre and press ENTER to see the list of

movies in that genre.

Use the / buttons to change the current selection

• Quicklist: Display a list of all the movies currently in your

Quicklist. Press  to display the Movie Options menu, where

you can start playback or remove movies from the Quicklist:

(highlighted in yellow).

Folders

6 items

Folder1

Folder2

File1

20 items

Quicklist

Scallop-man 3

Closer

Movie Options

Play from Begining

Remove

File2

Discount store

School of legend

Advance in the future part-2

The EEL

File3

Date: 2006

Genre: Action

Format:WMV

File4

World Baseball

Dream on the way

Finding a southpaw

Dear Customer

Select a folder and press ENTER to see the list of photos and

subfolders within the folder.

• Folders: Display a list of folders and movie files. Select a folder

and press ENTER to see the list of subfolders/movies files in that

folder.

30 items

Folder1

Go back

file_001

file_002

file_003

file_004

file_005

file_006

file_007

file_008

file_009

Use the / buttons to change the current selection

Browsing photos

The browse sub-menu gives you several ways to browse photos.

(highlighted in yellow).

• Press ENTER to start full-screen slideshow playback from the

currently selected photo.

30 items

Folder1

• Press  to start or resume slideshow playback from the last

photo displayed.

Go back

file_001

file_002

file_003

file_004

Displaying the Photo Options menu

Go back

file_005

Date

file_006

Quicklist

file_007

Folders

file_008

•

Press  to display the Photo Options menu.

• Press ENTER to display the Photo Options menu when

displaying photos in thumbnail view.

file_009

• Go back: Return to the previous menu.

• Date: Browse photos as thumbnails by date (year and month).

Select a year then press ENTER to further browse by month.

Select a month and press ENTER to see the photos taken that

month.

30 items

Folder1

Go back

file_001

file_002

file_003

file_004

file_005

file_006

file_007

file_008

file_009

Photo Options

Slideshow

Add to Quicklist

Date: 1/23/2006

Resolution: 196 x 298

Format: JPEG

• Quicklist: Display thumbnails of all the photos currently in your

Quicklist. Press ENTER to display the Photo Options menu,

from where you can start slideshow playback or remove photos

from the Quicklist:

• Slideshow: Start full-screen slideshow playback from the

currently selected photo. During the slideshow, press  to

advance to the next photo; to go back to the previous photo;

 (pause) to pause the slideshow;  to stop and exit the

slideshow; PHOTO ZOOM to enlarge the picture on the screen.

25 items

Quicklist

Photo Options

Slideshow

Remove

File: sample.jpg

Date: 1/23/2006

Resolution: 196 x 298

Format: JPEG

• Add to Quicklist: Add the selected photo to your Quicklist. The

Quicklist feature is a useful way to organize photos for handy

selection and slideshow playback. The Quicklist can contain up

to 25 photos.

• Folders: Display a list of folders and photo files on the disc.

Select a folder and press ENTER to see the subfolders/photos.

Displaying the browse menu

•

Press  to display the browse menu.

• From the left-most column, press  to display the browse menu

when displaying photos in thumbnail view:

Searching photos

From the Search sub-menu you can enter a few (up to 20) characters

of a photo title. As each character is entered into the search field the

search results are dynamically updated, narrowing down the list of

photos until you can see the one you’re looking for.

30 items

Folder1

Go back

file_001

file_002

file_003

5 items

Search Results

file_004

All Photos

file_005

Browse

file_006

file_007

Sort

file_008

R _

file_009

Depending on the browse menu, certain options may not be

selectable.

Home Menu

Enter

Options

Exit

• All Photos: Display all photos found on the disc as thumbnail

files.

See Searching movies on page 28 for how to use the screen keypad.

• Browse: Browse photos by Date, Quicklist or Folders. See also

Browsing photos below.

• Search: Find a photo by entering a name (or a few letters) to

search for. The search results are narrowed down as you enter

more letters. See also Searching photos on page 29.

• Sort: Sort photos by date (oldest first or most recent first), or

alphabetically by name (‘A’ first or ‘Z’ first).

Note

1 Quicklists are lost when you exit Photo Navigator.

Displaying the Song Options menu

Music Navigator

•

Press  to display Song Options menu:

The music section of the Disc Navigator allows you to browse and

play all the compatible music files found on the loaded DVD-R/-RW

disc (non-music files are not displayed).

Acoustic Guitar

20 items

Song Options

Electrified

See also File compatibility on page 9 for more on compatible file

types.

End Of The Road

Into The Arena

Keep On Running

Never Let You Go

Open Your Eyes

Pictures Of My Life

Real Sound

Play song

Add to Quicklist

Art

ode

Stars

Album: Remixes 81-04

Album: Acoustic Guitar

Genre: Alternative

Genre: Rock

Format:WMA

If you haven’t already done so, select ‘Disc Navigator’ from

Format:WMA

the Home Menu, then ‘Music’.

You should see a list of the artist names on the disc.

Rush Street

Take The Time

• Play Song: Play the selected song from the beginning.

20 items

Artists

• Add to Quicklist: Add the selected song to your Quicklist. The

Quicklist feature is a useful way to organize music files for handy

selection and playback. The Quicklist can contain up to 25

All Artists

Black Pappers

Album

Albums

Album

Albums

David Jack

Eric Gilberto

King

songs.

Michael Beck

Pioneer All Stars

Rock'n Roll Brothers

The Fishes

Displaying the browse menu

Treetop

•

Press  to display the browse menu:

Use the / buttons to change the current selection

(highlighted in yellow).

20 items

Acoustic Guitar

Electrified

9:31

8:00

7:31

3:55

6:33

5:26

4:57

9:36

6:18

Press ENTER to display the album list.

End Of The Road

Into The Arena

Keep On Running

Never Let You Go

20 items

Pioneer All Stars

All Songs

Open Your Eyes

Browse

Pictures Of My Life

All Albums

Real Sound

Sort

Acoustic Guitar

Best of Pioneer All Sta

Cooking Or Eating

Family

20 Songs

13 Songs

10 Songs

12 Songs

18 Songs

11 Songs

18 Songs

10 Songs

13 Songs

Rush Street

Now Playing

Take The Time

Good!!

Depending on the browse menu, certain options may not be

selectable.

Morning Glory

Poker Face

Song forYou

Tokyo

• All Songs: Display all songs (files/tracks) found on the disc.

• Browse: Browse songs by Artists, Albums, Genres, Quicklist

or Folders. See also Browsing songs on page 31.

Select the album you want to listen to and press ENTER to

display the song list.

• Search: Find a song by entering a name (or a few letters) to

search for. The search results are narrowed down as you enter

more letters. See also Searching songs on page 31.

20 items

Acoustic Guitar

Electrified

9:31

8:00

7:31

3:55

6:33

5:26

4:57

9:36

6:18

End Of The Road

Into The Arena

Keep On Running

Never Let You Go

Open Your Eyes

Pictures Of My Life

Real Sound

• Sort: Sort songs by date (oldest first or most recent first), or

alphabetically by song title, artist, album or genre (‘A’ first or ‘Z’

first).

Artist: Pioneer All Stars

Album: Acoustic Guitar

Genre: Rock

Format:WMA

• Now Playing: Display song information (track name, artist,

album, genre, etc.) and playback information. See also Now

playing song information on page 31.

Rush Street

Take The Time

• When the song length cannot be determined, it is displayed as

“-:--”.

Use the / buttons to change the current selection

(highlighted in yellow).

On the left side of the screen you can see file information, such as

the artist and album name, genre and file format, for the current

selection.

Press ENTER to play the currently highlighted music.

The display shows the Now Playing screen.

• Press  to start or resume playback from the last track played

on the Now Playing screen.

Note

1 Quicklists are lost when you exit Music Navigator.

Browsing songs

The browse sub-menu gives you various ways to browse songs.

Now playing song information

The Now Playing screen shows detailed information about the song

playing, including:

• Artist and song title

• Progress bar (elapsed time and song length)

• Album name

20 items

Acoustic Guitar

Electrified

9:31

8:00

7:31

3:55

6:33

5:26

4:57

9:36

6:18

End Of The Road

Into The Arena

Keep On Running

Never Let You Go

Open Your Eyes

Pictures Of My Life

Real Sound

• Genre

All Songs

Browse

• File format

Sort

Rush Street

Now Playing

• Browse menu

Take The Time

• Play status

• Go back: Return to the previous menu.

• Play mode

• Artists: Display a list of artists, and how many albums are

associated with each. Select an artist and press ENTER to see

the album list by that artist.

• Next/Previous song names

Now Playing

• Albums: Display a list of albums, and how many songs are

associated with each. Select an album and press ENTER to see

the list of songs on that album.

Pioneer All Stars

Real Sound

Acoustic Guitar

Genre: Rock

Format: MP3

3:10 / 5:51

• Genres: Display all music genres, and how many songs are in

each one. Select a genre and press ENTER to see the list of

artists in that genre.

All Songs

Browse



Sort

Now Playing

Previous Song

Pictures Of My

Next Song

Rush Street

• Quicklist: Display a list of all the songs currently in your

Quicklist. Press  to display the Song Options menu, where

you can start playback or remove songs from the Quicklist:

20 items

Quicklist

Electrified

Song Options

End Of The Road

Into The Arena

Keep On Running

Never Let You Go

Open Your Eyes

Pictures Of My Life

Real Sound

Play Song

Remove

Artist: Pioneer All Stars

Album: Acoustic Guitar

Genre: Rock

Format: WMA

Rush Street

Take The Time

• Folders: Display a list of folders and song files. Select a folder

and press ENTER to see the list of subfolders/songs.

Searching songs

From the Search sub-menu you can enter a few characters (up to 20)

of a song title, genre, artist, or album. As each character is entered

into the search field the search results are dynamically updated,

narrowing down the list until you can see the one you’re looking for.

Loading ...

items

Search Results

Scallop-man 3

Say No

1:31

1:02

1:31

1:33

School of legend

Seesaw

S _

Enter

Home Menu

Exit

Select

See Searching movies on page 28 for how to use the screen keypad.

Chapter 6

Using the Home Media Gallery

The Digital Living Network Alliance (DLNA) is a cross-industry

Introduction

organization of consumer electronics, computing industry and

mobile device companies. Digital Living provides consumers with

easy sharing of digital media through a wired or wireless network in

the home.

The Home Media Gallery allows you to browse and play movies,

music and photos stored on media servers connected on an

identical Local Area Network (LAN) as the player. This unit allows for

the playing of files stored on the following:

The DLNA certification logo makes it easy to find products that

comply with the DLNA Interoperability Guidelines. This unit

complies with DLNA Interoperability Guidelines v1.0.

• PCs running Microsoft Windows XP with Windows Media

Connect installed

When a PC running DLNA server software or other

DLNA-compatible device is connected to this player, some setting

changes of software or other devices may be required. Please refer

to the operating instructions for the software or device for more

information.

• PCs running Microsoft Windows Vista or XP with Windows

Media Player 11 installed

• DLNA-compatible digital media servers (on PCs or other

components)

• DLNA and DLNA CERTIFIED are trademarks and/or service

marks of Digital Living Network Alliance.

About network playback

Content playable over a network

The network playback function of this unit uses the following

technologies:

Even when encoded in a compatible format, some files may not play

correctly. See File compatibility on page 9. Some functions may not

be supported depending on the server type or version used.

Windows Media Player 11/Windows Media Connect

See About Windows Media Player 11/Windows Media Connect on

page 38 for details.

Supported file formats vary by server. As such, files not supported by

your server are not displayed on this unit.

For more information check with the manufacturer of your server.

Windows Media DRM

About playback behavior over a network

• Playback may stall when the PC is switched off or any media

files stored on it are deleted while playing content.

Microsoft Windows Media Digital Rights Management (WMDRM) is

a platform to protect and securely deliver content for playback on

computers, portable devices and network devices. Home Media

Gallery functions as a WMDRM 10 for networked devices.

WMDRM-protected content can only be played on media servers

supporting WMDRM.

• If there are problems within the network environment (heavy

network traffic, etc.) content may not be displayed or played

properly (playback may be interrupted or stalled). For best

performance, a 100BASE-TX connection between player and PC

is recommended.

• Content owners use WMDRM technology to protect their

intellectual property, including copyrights. This device uses

WMDRM software to access WMDRM-protected content. If the

WMDRM software fails to protect the content, content owners

may ask Microsoft to revoke the software’s ability to use WMDRM

to play or copy protected content. Revocation does not affect

unprotected content. When you download licenses for protected

content, you agree that Microsoft may include a revocation list

with the licenses. Content owners may require you to upgrade

WMDRM to access their content. If you decline an upgrade, you

will not be able to access content that requires the upgrade.

• Playback performance will vary with the power and condition

(seek time of the hard disk, etc.) of the PC being used.

• If several clients are playing simultaneously, as the case may be,

playback is interrupted or stalled.

• Depending on the security software installed on a connected PC

and the setting of such software, network connection may be

blocked.

• Problems with the PC may cause malfunctions.

• This product is protected by certain intellectual property rights of

Microsoft. Use or distribution of such technology outside of this

product is prohibited without a license from Microsoft.

Pioneer is not responsible for any malfunction of the player and/or

the Home Media Gallery features due to communication error/

malfunctions associated with your network connection and/or your

PC, or other connected equipment. Please contact your PC

manufacturer or Internet service provider.

DLNA

About the network settings

This unit uses DHCP and Auto IP functionality to make all the

network settings automatically.

If you are using a broadband router or a broadband modem with a

DHCP server function, setup should be completely automatic with

no manual settings required.

• DLNA CERTIFIED Audio/Video/Image Player

Using the Home Media Gallery

Movie Navigator

Before using the Home Media Gallery, make sure that you have

connected the player to the network and made the necessary

settings. See Network connection on page 16 and Setting up for

network use on page 21 for more information.

From the movie section of the Home Media Gallery you can browse

and play all the compatible movie files found on your local area

network (non-movie files are not displayed).

See also File compatibility on page 9 for more on compatible file

types.

HOME MEDIA

GALLERY

If you haven’t already done so, select ‘Home Media Gallery’

from the Home Menu, then ‘Movies’.

You should see a list of all the movie files found on the selected

server, together with their playing times.

1214 items

All Movies

Scallop-man 3

Closer

1:31

1:02

1:31

1:25

1:33

1:26

1:57

1:36

1:18

Discount store

School of legend

Advance in the future part-2

The EEL

Date: 12/01/2006

Genre: Adventure

Format:WMV

ENTER

HOME

RETURN

World Baseball

Dream on the way

Finding a southpaw

Dear Customer

Press HOME MENU and select ‘Home Media Gallery’ from

• When the movie length cannot be determined, it is displayed as

“-:--”.

the on-screen display.

Use the / buttons to change the current selection

Home Menu

(highlighted in yellow).

On the left side of the screen you can see file information, such as

the genre, date and file format, for the current selection.

Disc Navigator

Home Media Gallery

Video/Audio Adjust

Initial Setup

Press ENTER to play the currently highlighted movie.

Press  to start or resume playback from the last title played.

Displaying the Movie Options menu

•

Press  to display the Movie Options menu:

• Alternatively, press HOME MEDIA GALLERY.

• The Home Media Gallery is only available when the network or

server contains movies, photos or music files.

1214 items

All Movies

Scallop-man 3

Movie Options

Closer

Play from Beginning

Add to quicklist

Select ‘Movies’, ‘Photos’ or ‘Music’.

Discount store

School of legend

Advance in the future part-2

The EEL

Date: 12/01/2006

Genre: Adventure

Format: WMV

Home Media Gallery

World Baseball

Dream on the way

Finding a southpaw

Dear Customer

Movies

Photos

Music

• Play from Beginning: Play the selected movie from the

beginning.

• Add to Quicklist: Add the selected movie to your Quicklist. The

Quicklist feature is a useful way to organize movie files for handy

selection and playback. The Quicklist can contain up to 25

movies.

• On selecting an option, a list of movies, photos or music files

that the player finds on the selected server is displayed. From

here you can browse, play and sort network files.

• See the sections below for more information on each part of the

Home Media Gallery.

Press HOME MENU to exit the Home Media Gallery screen.

Note

1 Quicklists are lost in the following instances:

• When you exit Movie Navigator.

• When you change the server to which you are connected.

Searching movies

Displaying the browse menu

From the Search sub-menu you can enter a few (up to 20) characters

of a movie title or genre. As each character is entered into the

search field the search results are dynamically updated, narrowing

down the list of movies until you can see the one you’re looking for.

•

Press  to display the browse menu:

1214 items

All Movies

Scallop-man 3

1:31

1:02

1:31

1:25

1:33

1:26

1:57

1:36

1:18

Closer

Discount store

School of legend

Advance in the future part-2

4 items

Search Results

Scallop-man 3

Say No

1:31

1:02

1:31

1:33

All Movies

The EEL

Browse

School of legend

Seesaw

World Baseball

Dream on the way

Sort

Finding a southpaw

S _

Movie Sources

Dear Customer

Depending on the browse menu, certain options may not be

selectable.

Home Menu

Exit

• All Movies: Display all movie files found on the selected server.

• Use the /// and ENTER buttons to select characters

from the keypad.

• Browse: Browse movies by Genre, Quicklist or Folders. See

also Browsing movies below.

• Select SHFT to toggle between upper and lower case.

• Search: Find a movie by entering a name (or a few letters) to

search for. The search results are narrowed down as you enter

more letters. See also Searching movies below.

• Select SPC to insert a space.

• Select DEL to delete the character at the current cursor position

in the search field.

• Sort: Sort movies by date (oldest first or most recent first), or

alphabetically by title or genre (‘A’ first or ‘Z’ first).

• Select CLR to clear the search field.

• Movie Sources: Display servers on the network. See also Movie

sources below.

• Select DONE to close the keypad and select a movie or genre

from the search results; select CANCEL to close the keypad and

clear the search results.

Browsing movies

The Browse sub-menu gives you three ways to browse movies.

Movie sources

From the movie sources window you can see all the servers found

on the network and change the selected server.

1214 items

All Movies

Scallop-man 3

1:31

1:02

1:31

1:25

1:33

1:26

1:57

1:36

1:18

Current server

Closer

Discount store

School of legend

Advance in the future part-2

The EEL

Go back

Genres

Quicklist

Folders

3 items

Movie Sources

World Baseball

Dream on the way

Finding a southpaw

Dear Customer

Family Room Media Center

Living Room DVD Recorder

Den Computer

WMC

DLNA

WMC

Microsoft

Windows Media Connect

2.0

192.168.11.2

Authorized

• Go back: Return to the previous menu.

• Genres: Display all movie genres and how many movies are in

each one. Select a genre and press ENTER to see the list of

movies in that genre.

Pause

SomeSongTil 3:30

Home Menu

Exit

• Quicklist: Display a list of all the movies currently in your

Quicklist. Press  to display the Movie Options menu, where

you can start playback or remove movies from the Quicklist:

• Some servers found on the network may not be available for the

following reasons:

– The player is collecting file information from the server.

– There are no playable movie files on the server.

– This player is not authorized for the server. See also

Authorizing this player on page 38.

24 items

Quicklist

Scallop-man 3

Movie Options

Closer

Play from Beginning

Remove

Discount store

School of legend

Advance in the future part-2

The EEL

• Servers not currently available appear with a lock icon ( ) in the

server list.

Date: 12/01/2006

Genre: Adventure

Format: WMV

World Baseball

Dream on the way

Finding a southpaw

Dear Customer

• Folders: Display a list of folders and movie files. Select a folder

and press ENTER to see the list of movies and subfolders within

the folder. (The folder configuration may change depending on

the server type.)

Displaying the browse menu

From the left-most column, press  to display the Browse

Photo Navigator

•

The photo section of the Home Media Gallery allows you to browse

and display all the compatible photo files found on your local area

network (non-photo files are not displayed).

menu:

Summer_Vacation

1214 items

See also File compatibility on page 9 for more on compatible file

types.

If you haven’t already done so, select ‘Home Media Gallery’

All Photos

Browse

from the Home Menu, then ‘Photos’.

You should see a list of albums from the selected server.

Sort

Photo Sources

Albums

6 items

Depending on the browse menu, certain options may not be

selectable.

Family

My_Favorite

School

Sports

• All Photos: Display all photos found on the server.

Summer_Vacation

Winter_Vacation

• Browse: Browse photos by Albums, Date, Quicklist or Folders.

See also Browsing photos below.

• Search: Find a photo by entering a name (or a few letters) to

search for. The search results are narrowed down as you enter

more letters. See also Searching photos on page 36.

Use the / buttons to change the current selection

(highlighted in yellow).

• Sort: Sort photos by date (oldest first or most recent first), or

alphabetically by name (‘A’ first or ‘Z’ first).

3 Press ENTER to display the selected photo list.

• Photo Sources: Display servers on the network. See also Photo

sources on page 36.

Summer_Vacation

1214 items

Browsing photos

The Browse sub-menu gives you several ways to browse photos.

File: sample.jpg

Date: 12/06/2006

Resolution: 2196

Format: JPEG

1298

Summer_Vacation

1214 items

Use the /// buttons to change the current

Go back

Albums

Date

thumbnail selection (highlighted in yellow).

Press  to start or resume slideshow playback from the last photo

displayed.

Quicklist

Folders

• Go back: Return to the previous menu.

Displaying the Photo Options menu

• Albums: Display a list of server albums.

•

Press ENTER to display the Photo Options menu:

• Date: Browse photos by date (year and month). Select a year

then press ENTER to further browse by month. Select a month

and press ENTER to see the photos taken that month.

Summer_Vacation

1214 items

Photo Options

• Quicklist: Display thumbnails of all the photos currently in your

Quicklist. Press ENTER to display the Photo Options menu,

where you can start slideshow playback or remove photos from

the Quicklist:

Slideshow

Add to Quicklist

File: sample.jpg

Date: 12/06/2006

Resolution: 2196 x 1298

Format: JPEG

Quicklist

24 items

Photo Options

• Slideshow: Starts full-screen slideshow playback from the

currently selected photo. During the slideshow, press  to

advance to the next photo; to go back to the previous photo;

 (pause) to pause the slideshow;  to stop and exit the

slideshow; PHOTO ZOOM to enlarge the picture on the screen.

Slideshow

Remove

File: sample.jpg

Date: 12/06/2006

Resolution: 2196 x 1298

Format: JPEG

• Add to Quicklist: Add the selected photo to your Quicklist. The

Quicklist feature is a useful way to organize photos for handy

selection and slideshow playback. The Quicklist can contain up

to 25 photos.

Note

1 Quicklists are lost in the following instances:

• When you exit Photo Navigator.

• When you change the server to which you are connected.

• Folders: Display a list of folders and photo files. Select a folder

and press ENTER to see a list of photos and subfolders within

the folder. (The folder configuration may change depending on

the server type.)

Use the / buttons to change the current selection

(highlighted in yellow).

Press ENTER to display the album list.

Searching photos

Pioneer All Stars

1214 items

From the Search sub-menu you can enter a few (up to 20) characters

of a photo title. As each character is entered into the search field the

search results are dynamically updated, narrowing down the list of

photos until you can see the one you’re looking for.

All Albums

Acoustic Guitar

Best of Pioneer All Stars

Cooking Or Eating

Family

20 Songs

13 Songs

10 Songs

12 Songs

18 Songs

11 Songs

18 Songs

10 Songs

13 Songs

Good!!

Morning Glory

Poker Face

Song forYou

Tokyo

Search Results

5 items

Select the album you want to listen to and press ENTER to

display the song list.

R _

Acoustic Guitar

1214 items

Electrified

9:31

8:00

7:31

3:55

6:33

5:26

4:57

9:36

6:18

Home Menu

Exit

End Of The Road

Into The Arena

Keep On Running

Never Let You Go

Open Your Eyes

Pictures Of My Life

Real Sound

Artist: Pioneer All Stars

Album: Acoustic Guitar

Genre: Rock

See Searching movies on page 34 for how to use the screen keypad.

Format:WMA

Photo sources

Rush Street

Take The Time

From the photo sources window you can see all the servers found on

the network and change the selected server. See Movie sources on

page 34 for more information.

• When the song length cannot be determined, it is displayed as

“-:--”.

Music Navigator

Use the / buttons to change the current selection

(highlighted in yellow).

On the left side of the screen you can see file information, such as

the artist and album name, genre and file format, for the current

selection.

From the music section of the Home Media Gallery you can browse

and play all the compatible song files found on your local area

network (non-music files are not displayed).

See also File compatibility on page 9 for more on compatible file

types.

Press ENTER to play the currently highlighted music.

The display shows the Now Playing screen.

• Press  to start or resume playback from the last track played

If you haven’t already done so, select ‘Home Media Gallery’

on the Now Playing screen.

from the Home Menu, then ‘Music’.

You should see a list of all the artist names found on the selected

server.

Displaying the Song Options menu

•

Press  to display Song Options menu:

Artists

1214 items

All Artists

1214 items

Song Options

Acoustic Guitar

Black Pappers

Album

Albums

Album

Albums

David Jack

Electrified

Eric Gilberto

King

End Of The Road

Into The Arena

Keep On Running

Never Let You Gohe

Open Your Eyes

Pictures Of My Life

Real Sound

Play song

Add to Quicklist

Michael Beck

Pioneer All Stars

Rock'n Roll Brothers

The Fishes

Artist: Pioneer All Stars

Artist:Depeche Mode

Album: Remixes 81-04

Album: Acoustic Guitar

Genre: Alternative

Genre: Rock

Format:WMA

Treetop

Rush Street

Take The Time

• Play Song: Play the selected song from the beginning.

• Add to Quicklist: Add the selected song to your Quicklist. The

Quicklist feature is a useful way to organize music files for handy

selection and playback. The Quicklist can contain up to 25

songs.

Note

1 Quicklists are lost in the following instances:

• When you exit Music Navigator.

• When you change the server to which you are connected.

• Quicklist: Display a list of all the songs currently in your

Quicklist. Press  to display the Song Options menu, where

you can start playback or remove songs from the Quicklist:

Displaying the browse menu

Press  to display the browse menu:

•

1214 items

Acoustic Guitar

Quicklist

24 items

Song Options

Electrified

9:31

8:00

7:31

3:55

6:33

5:26

4:57

9:36

6:18

Electrified

End Of The Road

Into The Arena

Keep On Running

Never Let You Go

Open Your Eyes

Pictures Of My Life

Real Sound

End Of The Road

Play song

Remove

Into The Arena

Keep On Running

Never Let You Go

Open Your Eyes

Pictures Of My Life

Real Sound

Artist: Pioneer All Stars

Album: Acoustic Guitar

Genre: Rock

All Songs

Browse

Format: WMA

Browse menu

Sort

Rush Street

Now Playing

Music Sources

Rush Street

Take The Time

Depending on the browse menu, certain options may not be

selectable.

• Folders: Display a list of folders and song files. Select a folder

and press ENTER to see the list of songs and subfolders within

the folder. (The folder configuration may change depending on

the server type.)

• All Songs: Display all songs (files/tracks) found on the server.

• Browse: Browse songs by Artists, Albums, Genres, Playlists,

Quicklist or Folders. See also Browsing songs below.

Searching songs

• Search: Find a song by entering a name (or a few letters) to

search for. The search results are narrowed down as you enter

more letters. See also Searching songs below.

From the Search sub-menu you can enter a few characters (up to 20)

of a song title, genre, artist or album. As each character is entered

into the search field the search results are dynamically updated,

narrowing down the list of songs until you can see the one you’re

looking for.

• Sort: Sort songs by date (oldest first or most recent first), or

alphabetically by song title, artist, album or genre (‘A’ first or ‘Z’

first).

Loading···

• Now Playing: Display song information (track name, artist,

album, genre, etc.) and playback information. See also Now

playing song information on page 37.

Search Results

4 items

Reason

1:31

1:02

1:31

1:25

Real Sound

Rolling Dice

Rush Street

• Music Sources: Display servers on the network. See also Music

R _

sources on page 37.

Browsing songs

The browse sub-menu gives you various ways to browse songs.

Home Menu

Exit

See Searching movies on page 34 for how to use the screen keypad.

1214 items

Acoustic Guitar

Electrified

9:31

8:00

7:31

3:55

6:33

5:26

4:57

9:36

6:18

End Of The Road

Into The Arena

Keep On Running

Never Let You Go

Open Your Eyes

Pictures Of My Life

Real Sound

Now playing song information

The Now Playing screen shows detailed information about the

song playing, including:

Go back

Artists

Browse

sub-menu

Albums

Genres

Playlists

Quicklist

Folders

• Artist and song title

• Progress bar (elapsed time and song length)

• Album name

Rush Street

Take The Time

• Go back: Return to the previous menu.

• Genre

• Artists: Display a list of artists, and how many albums are

associated with each. Select an artist and press ENTER to see

the album list by that artist.

• File format

• Browse menu

• Play status

• Albums: Display a list of albums, and how many songs are

associated with each. Select an album and press ENTER to see

the list of songs on that album.

• Play mode

• Next/Previous song names

• Genres: Display all music genres, and how many songs are in

each one. Select a genre and press ENTER to see the list of

artists in that genre.

Now Playing

• Playlists: Display the server Playlists.

Pioneer All Stars

Real Sound

Acoustic Guitar

Genre: Rock

Format: MP3

3:10 / 5:51

All Songs

Browse



Sort

Now Playing

Music Sources

Previous Song

Pictures Of My

Next Song

Rush Street

Music sources

From the music sources window you can see all the servers found

on the network and change the selected server. See Movie sources

on page 34 for more information.

First entering Movie, Photo or Music Navigator

After powering on this player and entering the Movie, Music or

Photo Navigator, you may be presented with the Folders screen.

This is due to this player compiling a list of the available media on

your media servers. This list will vary depending on the media

sharing software you are using, but you will be able to navigate

through the list using the / buttons, the ENTER key to select a

folder, or the ENTER key on the Go back selection found in each

folder.

About Windows Media Player 11/Windows

Media Connect

Windows Media Player 11/Windows Media Connect is software to

deliver music, photos and movies from a Microsoft Windows XP

computer to home stereo systems and TVs. The same function is

also available in Windows Media Player 11.

With this software, you can play back files stored on the PC through

various devices wherever you like in your home.

If you come to a folder containing content that you wish to play, you

may press  to display the Movie Options, Photo Options, or

Song Options as illustrated in pages 33, 35 and 36).

At this time you cannot download the Windows Media Connect

software from Microsoft’s website. If your server currently does not

have Windows Media Connect installed, install Windows Media

Player 11 (for Windows XP) instead. This software can be

downloaded from Microsoft’s website.

Pressing  to display the browse menu (as illustrated in,

pages 34, 35 and 37) will may a browse menu with the All Movies,

All Photos or All Songs options grayed out. If this is the case, this

means that this player has not finished compiling the list of available

media, and you may continue to browse through the folders and play

media while this list completes. When this player has finished

compiling this list, the All Movies, All Photos or All Songs options

will no longer be grayed out, and you will be able to select these and

continue navigating as described in this chapter:

For more information check the official Microsoft website.

Authorizing this player

In order to be able to browse and play files from a server this player

must be authorized or registered. This happens automatically when

the player makes a connection over the network to the server. If not,

please authorize or register this player manually on the server.

If you are not presented with a folders menu as described above, this

means that this player has finished compiling a list of available

media on your media servers, and you can navigate through the

Movie, Photo or Music Navigator screens as described in this

manual.

For more information on authorizing this player, refer to the

instruction manual of your server.

FAQ

Changing content on your Media Server

• Some files don’t show up. Where are they?

If you change the available content on your media server (by adding

or removing shared files) while you are in the Movie, Photo or Music

Navigators, the Movie, Photo or Music Navigator screen you are on

will change to the Folders menu. From here, you can browse the

folders and play content as described in the first section. Once this

player has finished compiling a new list of available media, the All

Movies, All Photos or All Songs options of the browse menu will

become highlighted an accessible.

– File names that don’t end with one of the permitted extensions

won’t be recognized by this player. See also File compatibility on

page 9.

– Supported file formats vary by server. As such, files not

supported by your server are not displayed on this unit.

For more information check with the manufacturer of your

server.

Chapter 7

Video/Audio Adjust menu

From the Video/Audio Adjust menu you can make various settings

that affect how video is presented on your TV and how the sounds.

Items in the Video/Audio Adjust menu can only be changed

during playback.

Creating your own presets

You can create up to three presets of your own.

Select one of the Memory presets.

Press  to select ‘Detailed Settings’ then press ENTER.

Video Adjust

Memory 1

• Default setting: Standard

Detailed Settings

From the Video Adjust screen you can select the Standard or

Cinema video presentation or define presets of your own in

Memory 1 to Memory 3.

Adjust the picture quality settings.

• Use the / buttons to select a setting.

Press HOME MENU and select ‘Video/Audio Adjust’ from

• Use the / buttons to adjust the current setting.

the on-screen display.

You can press VIDEO ADJUST on the remote to display the Video

Adjust screen.

Memory 1

White Level

Black Level

Hue

Min

Max

Red

Max

Home Menu

Green

Min

Disc Navigator

Home Media Gallery

Video/Audio Adjust

Initial Setup

Chroma Level

Select a setting then press ENTER to display just that setting. This

gives you more screen area in which to see the effects of changes

you make.

Memory 1

Select ‘Video Adjust’.

Min

Max

White Level

Use the / buttons to select a preset.

• Press ENTER or RETURN to go back to full-screen display.

Standard

Detailed Settings

You can adjust any or all of the following picture quality settings:

• White Level¹– Adjusts the intensity of white.

• Black Level¹– Adjusts the intensity of black.

• Hue¹– Adjusts the overall color balance between red and green.

• Chroma Level¹– Adjusts how saturated colors appear.

• Standard – Standard setting

• Cinema – Optimized for watching movies

• Memory 1/Memory 2/Memory 3 – Use for saving your own

presets (see Creating your own presets below)

Press ENTER or RETURN to make the setting and exit the

Press RETURN to save the preset and exit the Detailed

Video Adjust screen.

Settings screen.

PureCinema

There are two types of video signals: Video interlace material, with a

frame rate of 30 frames/second; and film progressive material, that has

a frame rate of 24 frames/second.

In PureCinema mode film progressive material is converted to 60

frames/second progressive, which matches more closely the picture

quality of a cinema screen. (24 frames/second source is converted to 60

frames/second.)

When you have Video Adjust set to Standard, Cinema, or Memory 1,

Memory 2 or Memory 3 and play a BD-ROM or DVD disc video that can

be identified as film progressive or video interlace material, PureCinema

mode is automatically activated.

If you notice problems with the images projected when set to Cinema

(images appear to motion-blurred, or jagged), set the Video Adjust to

Standard or Memory 1, Memory 2 or Memory 3.

Note

1 Effective only for video output from HDMI OUT or COMPONENT VIDEO OUT connections (settings do no affect video output from VIDEO OUT or S-VIDEO OUT).

Audio Adjust

From the Audio Adjust menu you can set the Audio DRC (Dynamic

Range control).

Audio DRC

• Default setting: Off

When watching Dolby Digital BD and DVD discs, as well as PC files

with Dolby Digital audio, at low volume, it’s easy to lose the quieter

sounds completely — including some of the dialog. Switching

Audio DRC to On can help by bringing up the quieter sounds, while

controlling loud peaks.

How much of a difference you hear depends on the material you’re

listening to. If the material doesn’t have wide variations in volume,

you may not notice much change.

Important

• Audio DRC is effective with the following types of audio:

– Analog audio from the AUDIO OUT (2ch) and

AUDIO OUT (5.1ch) jacks.

– PCM audio from the DIGITAL AUDIO OUT (COAXIAL/

OPTICAL) and HDMI OUT jacks (see also About the audio

output settings on page 44).

Press HOME MENU and select ‘Video/Audio Adjust’ from

the on-screen display.

Home Menu

Disc Navigator

Home Media Gallery

Video/Audio Adjust

Initial Setup

Select ‘Audio Adjust’.

Video/Audio Adjust

Video Adjust

Audio Adjust

Highlight Audio DRC, then use the / buttons to change

to ‘Off’, ‘Level 1’, ‘Level 2’ or ‘Max’ as required.

Audio Adjust

Audio DRC

Max

Off

Press ENTER or RETURN to make the setting and exit the

Audio Adjust screen.

^CI^hn^api^tt^ei^ra⁸l Setup menu

Using the Initial Setup menu

The Initial Setup menu is where you can set various player options for sound, picture, language and so on. Note that settings can only be

changed when the player is stopped.

If you disconnect the player from the wall outlet before switching the player off, any new settings made during that session will be lost.

•

Press HOME MENU and select ‘Initial Setup’.

In the table below, the default option is marked with a •

Setting

Options

Explanation

Video Out

TV Aspect Ratio

4:3 (Standard)

Select if you have a standard 4:3 TV. See Changing the output video resolution.

When the output video resolution is set to 720p, 1080i or 1080p, video is output in 16:9

widescreen format even if TV Aspect Ratio is set to 4:3 (Standard). When connected to a 4:3

TV, set the output video resolution to 480i or 480p. See also Changing the output video

resolution on page 14.

16:9 (Widescreen) •

Full

Select if you have a widescreen 16:9 TV.

4:3 Video Out

4:3 video material is output without black bars on either side of the picture if the

TV Aspect Ratio (above) is set to 16:9 (Widescreen).

Normal •

4:3 video material is output with black bars on either side of the picture if the TV Aspect Ratio

setting (above) is set to 16:9 (Widescreen).

DVD 16:9 Video Out

Letter Box •

Pan & Scan

If the TV Aspect Ratio setting (above) is set to 4:3 (Standard), select this if you prefer

letterbox presentation of 16:9 format DVDs.

If the TV Aspect Ratio setting (above) is set to 4:3 (Standard), select this if you prefer

Pan & Scan presentation of 16:9 format DVDs.

Some discs contain only Letter Box or Pan & Scan presentation so the video output will depend on the disc.

HDMI Color Space

YCbCr •

This is the standard setting for HDMI-compatible devices.

RGB (16-235)

RGB (0-255)

Use this setting if colors appear overly rich and the black too deep on the RGB (0-255) setting.

Use if colors are weak and black appears to ‘float’ on the RGB (16-235) setting.

When using an HDMI monitor that accepts only RGB input, this player outputs RGB video even if this setting is set to YCbCr. If the monitor is DVI-compatible, the player

outputs RGB (0-255) color space. If however the picture looks unnatural, set it to RGB (16-235).

24p Direct Out

Gives smooth movement in BD film material video. This setting is only effective when the

player is connected to a 1080/24p-compatible TV using HDMI.

Off •

Choose this setting if you notice picture disturbance when the video switches between video

and film material.

When 24p Direct Out is On, you may experience some picture disturbance when the video switches between video and film material. See also Changing the output video

resolution on page 14.

Setting

Options

Explanation

Audio Out

Dolby Digital Out

Dolby Digital •

Outputs a Dolby Digital signal when a Dolby Digital source is being played.

Dolby Digital  PCM Converts Dolby Digital sources to Linear PCM output. Use if your connected equipment

doesn’t support Dolby Digital audio.

This setting is effective in digital audio outputs.

DTS Out

DTS •

Outputs a DTS signal when a DTS source is being played.

DTS  PCM

Converts sources with DTS audio to Linear PCM output. Use if your connected equipment

doesn’t support DTS audio.

This setting is effective in digital audio outputs.

DTS Downmix

Stereo •

If you’ve selected DTS  PCM in DTS Out above, you can choose the way the DTS signal is

downmixed PCM audio. Stereo downmixes the signal to 2-channel stereo.

Lt/Rt

Downmixes to a 2-channel signal compatible with Dolby surround matrix decoders. (This

allows you to hear surround sound if your AV receiver or amplifier has Dolby Pro Logic

capability.)

HDMI Audio Out

Auto •

PCM

Outputs a bitstream of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD High

Resolution Audio or DTS. However, if the player is connected to an HDMI device that is

incompatible with the output of Dolby TrueHD, Dolby Digital Plus or DTS-HD High Resolution

Audio, it outputs the Dolby Digital or DTS bitstream. Depending on the HDMI device

connected and the content being played, Linear PCM audio may be output. See About the

audio output settings on page 44 for details.

All audio signals are converted to Linear PCM. This player can output up to 7.1 ch Linear PCM

if the connected HDMI devices are capable of the output of Dolby TrueHD, Dolby Digital Plus

or DTS-HD High Resolution Audio. See About the audio output settings on page 44 for details.

Language

OSD Language

English •

Sets the language of the on-screen displays to English.

available languages

English •

Choose from the languages displayed for the on-screen displays.

Sets both the BD-ROM and DVD-Video default audio language to English.

Audio Language

available languages

Choose from the languages displayed to set the default audio language for BD-ROM and

DVD-Video playback.

Other

Continue to the next screen to set the default audio language for BD-ROM and DVD-Video

disc playback. You can select the language name or enter the code number (see on page 49

for the code list).

Discs do not necessarily have audio in your selected language. Also, some discs override the Audio Language preference.

Subtitle Language

English •

Sets the default subtitle language for BD-ROM and DVD-Video playback to English.

available languages

Choose from the languages displayed to set the default subtitle language for BD-ROM and

DVD-Video playback.

Other

Continue to the next screen to set the default subtitle language for BD-ROM and DVD-Video

disc playback. You can select the language name or enter the code number (see on page 49

for the code list).

Discs do not necessarily have subtitles in your selected language. Also, some discs override the Subtitle Language preference.

BD/DVD Menu

Language

w/Subtitle

Sets the language of BD-ROM and DVD-Video menus to the same as that set for the subtitle

language.

Language

•

available languages

Choose from the displayed languages to set the default language for BD-ROM and DVD-Video

menus.

Other

Continue to the next screen to set the default menu language for BD-ROM and DVD-Video

disc menus. You can select the language name or enter the code number (see on page 49 for

the code list).

Discs do not necessarily have menus in your selected menu language.

Subtitle Display

On •

Off

Select to have BD-ROM and DVD-Video discs display subtitles.

Select to switch off subtitle display.

Some discs may override these settings.

Setting

Options

Explanation

Parental Lock

Change Password

(Set Password)

Next Screen

Set or change the password necessary to play BD or DVD discs that have level/age

restrictions. In order to change the password, you’ll need to first enter your existing one.

DVD Parental Lock

Change Level

Enter your password and then set the parental lock level. Discs with a lock level higher than

that set in the player will require the password to play.

DVD Country Code

Enter your password and then set a country/area code. This ensures that you see the scenes

intended for your country or area. See BD/DVD country/area code list on page 49.

BD Parental Lock

Change Age

Restriction

Enter your password and then set the age restriction. “255” indicates no parental control.

BD Country Code

Enter your password and then set a country/area code. This ensures that you see the scenes

intended for your country or area. See BD/DVD country/area code list on page 49.

Only certain discs have parental lock features. Check the disc packaging to see what features the disc has. If you forget your password you can reset it by resetting the player

to its factory settings. See BD/DVD language code list on page 49.

Network

IP Configuration

Next Screen

Continue to the next screen to input IP address details. See Setting up for network use on

page 21 for more detailed information.

Device Name

Continue to the next screen to set the name of this player as it will appear to other devices on

the network. See Setting up for network use on page 21 for more detailed information.

Display Network

Config.

Continue to the next screen to see a summary of your network settings.

Speakers

Audio Output Mode

2 Channel •

5.1 Channel

Set if you connected this player to an amplifier using only the front left/right channels of the

AUDIO OUT (5.1ch) outputs.

Set if you connected this player to an amplifier using all 5.1 channels of the

AUDIO OUT (5.1ch) outputs. On this setting the audio output from the AUDIO OUT (2ch)

jacks will be incorrect.

Speaker Setup

Next Screen

Continue to the next screen to specify which speakers are connected to your system.

This setting affects how audio is output from the multi-channel analog outputs. See Speaker

Setup on page 45 for more detailed information.

Options

On Screen Display

On •

Off

The player displays operation displays (“Stop”, “Play”, etc.) on-screen.

Switches off the on-screen operation displays.

Auto Power Off

On •

If the player is stopped or paused for more than 30 minutes with no operation by the user, the

player automatically switches itself off.

Off

No automatic power off.

Setup Navigator

HDMI Control

Start

On •

Off

Select to start the Setup Navigator. See also Switching on and setting up on page 20.

Select when using the HDMI Control function. See HDMI Control on page 7.

Select when not using the HDMI Control function. See HDMI Control on page 7.

Playback the BD portion.

Set hybrid disc

playback layer

BD •

DVD

Playback the DVD portion. When no DVD portion is present, the BD portion is played back.

Playback the CD portion. When no CD portion is present, the BD portion is played back.

This setting cannot be changed when a disc is inserted in the disc tray.

Software Update

Start

The Software Update function can check for and download updated system software from the

network server. See Software updating on page 45.

About the audio output settings

The table below shows how the audio settings you make in the Initial Setup menu (page 41) affect the output to the analog (2ch/5.1ch), digital

and HDMI outputs with various types of disc/files.

HDMI output¹

PCM⁶

Analog outputs

2ch²

Digital outputs

PCM convert³

Disc audio format

Dolby Digital

Bitstream^4,5

5.1ch²

Auto^5,6,7

2ch downmix

PCM

5.1ch PCM

2ch downmix

PCM

Dolby Digital

5.1ch PCM

Dolby Digital

Plus⁸

2ch downmix

PCM

5.1ch PCM

2ch downmix

PCM

Dolby Digital

7.1ch PCM⁹

Dolby Digital

Plus

Dolby TrueHD⁸

2ch downmix

PCM

5.1ch PCM

2ch downmix

PCM

Dolby Digital

DTS

7.1ch

Dolby TrueHD¹⁴

PCM^{9,10,11,12,13}

DTS

2ch downmix

PCM

2ch downmix

PCM

5.1ch

PCM^10,15,16

DTS

BD-ROM

DTS-HD High

Resolution

2ch downmix

PCM

5.1ch PCM

2ch downmix

PCM

DTS

7.1ch

DTS-HD High

Resolution Audio

PCM^9,10,12,15

Audio¹⁷

DTS-HD Master 2ch downmix

Audio¹⁸

2ch downmix

PCM

5.1ch

PCM^10,15,16

DTS

PCM

Linear PCM

2ch downmix

PCM

5.1ch downmix 2ch downmix

2ch downmix

PCM

7.1ch

7.1ch PCM

PCM^10,11,15

PCM¹¹

PCM

Dolby Digital

DTS

2ch downmix

PCM

5.1ch PCM

2ch downmix

PCM

Dolby Digital

5.1ch PCM

Dolby Digital

DTS

2ch downmix

PCM

5.1ch PCM

2ch downmix

PCM

DTS

5.1ch PCM

DVD-Video

MPEG

2ch PCM

Linear PCM

1. If the connected HDMI device is compatible with fewer channels of Linear PCM audio than this player, the output will be adjusted to be compatible with the HDMI device.

2. When Audio Output Mode is set to 2 Channel or 5.1 Channel (see Audio Output Mode on page 43).

3. Dolby Digital  PCM or DTS  PCM setting (see Dolby Digital Out and DTS Out on page 42).

4. Dolby Digital or DTS setting (see Dolby Digital Out and DTS Out on page 42).

5. Even if there is interactive audio, interactive audio is not mixed.

6. When HDMI Audio Out is set to PCM or Auto (see HDMI Audio Out on page 42).

7. If the connected HDMI device is not compatible with Dolby Digital Plus, Dolby TrueHD or DTS-HD High Resolution Audio, the signal will be output as Dolby Digital or DTS.

If the HDMI device is not compatible with Dolby Digital or DTS, the signal is output as Linear PCM. If Dolby TrueHD, Dolby Digital Plus or DTS-HD High Resolution Audio is

converted and output as Linear PCM, the output signal is Linear PCM of each source signal.

8. AUDIO OUT (2ch), AUDIO OUT (5.1ch) and DIGITAL AUDIO OUT (COAXIAL/OPTICAL) output Dolby Digital.

9. Audio is output in 7.1ch/6.1ch with Surround Back output sources only. With other sources, audio is output in 5.1ch. The 6.1 Surround Back audio is output in 7.1ch.

10.Interactive audio is not mixed when the sampling rate is 192 kHz or 96 kHz.

11.Outputs 2ch downmix PCM when the sampling rate is 192 kHz.

12.Outputs max. 5.1ch audio when the disc contains 96 kHz audio and the resolution is set to 720p, 1080i or 1080p.

13.Outputs 2ch audio when the disc contains 96 kHz audio and the resolution is set to 480i or 480p.

14.Outputs a Dolby Digital bitstream when the resolution is set to 480i or 480p.

15.Outputs 48 kHz audio when the disc contains 96 kHz audio and the resolution is set to 480i or 480p.

16.Outputs 7.1ch audio when the source is the DTS-ES 6.1 Discrete audio.

17.AUDIO OUT (2ch), AUDIO OUT (5.1ch) and DIGITAL AUDIO OUT (COAXIAL/OPTICAL) output DTS.

18.DTS sound is output.

Note

• Output sampling rate is 48 kHz through the digital audio outputs.

• MPEG audio is always output as linear PCM.

Speaker Setup

Note

• Steps 1 to 3 are the operations performed by the user (they are

intended to download the software from the Internet).

You only need to make this setting if you connected this player to your

amplifier using the 5.1 channel analog outputs.

• Steps 4 to 6 are the operations performed (automatically) by the

player (they are intended to update the software).

This setting does not affect any digital audio output.

Use the Speaker Setup screen to tell the player what kinds of

Press HOME MENU and select ‘Initial Setup’.

Select ‘Options’, then ‘Software Update’.

Select ‘Start’, then ‘Yes’.

speakers you have connected.

Press HOME MENU and select ‘Initial Setup’.

Select ‘Speakers’.

Select ‘Speaker Setup’, then ‘Next Screen’.

Use the / buttons to select a speaker.

Initial Setup

Video Out

Audio Out

Language

Parental Lock

Network

Software Update

Yes

Initial Setup

Spekaers

Options

Video Out

Audio Out

Language

Parental Lock

Network

Speaker Setup

Yes

Do not unplug the power cord during downloading.

The disc tray will open. Do not touch it. Wait awhile.

Start downloading?

Ls/Rs

L/R

Yes

Large

Spekaers

Options

• The player turns off automatically.

Use the / buttons to change the speaker setup.

• If the player is already running the latest software, a help

message will be displayed.

Specify which speakers you have in your setup:

• C (Center): Yes or No

• Depending on the Internet connection conditions, software

updating may take a certain period of time (certain time is also

required for downloading of software). Other operations are

defeated during software updating.

• Ls/Rs (Surround): Yes or No

• L/R (Main): Small or Large (This setting is only applicable if the

C and Ls/Rs speakers are present.)

Downloading and updating of the software start.

Press ENTER to save the settings and exit the Speaker Setup

The front panel display shows the following messages, and the

player produces an operating sound (it does not output audio or

video).

screen.

Software updating

“POWER OFF”



The software of the player can be updated by connecting it to the

Internet using a LAN cable.

“POWER ON”



“NET”

Important



“NET-DWLD”

• Depending on the Internet connection conditions, software

updating may take a certain period of time (certain time is also

required for downloading of software). Other operations are

defeated during software updating.



“DOWNLOAD”

Updating starts.

• As the disc tray opens automatically when software updating

starts, it is recommended to open the rack door if the player is

installed in a rack with front doors. When the disc tray is open,

never attempt to push close it by force (leave the disc tray open).

• The front panel display shows messages such as

“DATA CHECK”, “WRT FLASH1”, “WRT DRIVE” and “WRT

SUBCON”.

• Do not unplug the power cord during software updating.

Otherwise, the updating will be aborted and malfunction may

occur with the player.

The disc tray opens automatically when updating

completes.

• The front panel display shows “DL OK” and the player turns off

automatically.

• When the disc tray is open, never attempt to push close it by

force (leave the disc tray open).

Verify that the software is updated properly.

• Step 7 is the operation performed by the user.

• Turn the player on. If the front panel display shows “DL OK”, the

software has been updated successfully.

Chapter 9

Additional information

Taking care of your player and discs

Damaged and odd-shaped discs

Discs spin at high speed inside the player. If you can see that a disc

is cracked, chipped, warped, or otherwise damaged, don’t risk using

it in your player — you could end up damaging it.

Handling discs

When holding discs of any type, take care not to leave fingerprints,

dirt or scratches on the disc surface. Hold the disc by its edge or by

the center hole and edge.

Damaged or dirty discs can affect playback performance. Take care

also not to scratch the label side of the disc. Although not as fragile

as the recorded side, scratches can still result in a disc becoming

unusable.

Should a disc become marked with fingerprints, dust, etc., clean

using a soft, dry cloth, wiping the disc lightly from the center to the

outside edge as shown in the diagram below.

This player is designed for use with conventional, fully circular discs

only. Use of shaped discs is not recommended for this product.

Pioneer disclaims all liability arising in connection with the use of

shaped discs.

Do not use any kind of adapter when playing 8 cm DVD discs. This

size disc can be played in this player without an adapter; just use the

smaller disc guide in the disc tray.

Cleaning the pickup lens

Wipe lightly from the center of the disc using straight strokes.

Don’t wipe the disc surface using circular strokes.

The player’s lens should not become dirty in normal use, but if for

some reason it should malfunction due to dust or dirt, consult your

nearest Pioneer-authorized service center. Although lens cleaners

for DVD players are commercially available, we advise against using

them since some may damage the lens.

Problems with condensation

If necessary, use a cloth soaked in alcohol, or a commercially

available DVD/BD cleaning kit to clean a disc more thoroughly.

Never use benzine, thinner or other cleaning agents, including

products designed for cleaning vinyl records.

Condensation may form inside the player if it is brought into a warm

room from outside, or if the temperature of the room rises quickly.

Although the condensation won’t damage the player, it may

temporarily impair its performance. For this reason you should leave

it to adjust to the warmer temperature for about an hour before

switching on and using.

Storing discs

Although BD and DVD discs are more durable than vinyl records,

you should still take care to handle and store discs correctly. When

you’re not using a disc, return it to its case and store upright. Avoid

leaving discs in excessively cold, humid, or hot environments

(including under direct sunlight).

Don’t glue paper or put stickers onto the disc, or use a pencil,

ball-point pen or other sharp-tipped writing instrument. These could

all damage the disc.

For more detailed care information see the instructions that come

with discs.

Do not load more than one disc into the player at a time.

Hints on installation

Screen sizes and disc formats

We want you to enjoy using this product for years to come, so please

bear in mind the following points when choosing a suitable location

for it:

BD-ROM and DVD-Video discs come in several different screen

aspect ratios, ranging from TV programs, which are generally 4:3, to

CinemaScope widescreen movies, with an aspect ratio of up to

about 7:3.

Do...

• Use in a well-ventilated room.

Televisions, too, come in different aspect ratios; ‘standard’ 4:3 and

‘widescreen’ 16:9.

• Place on a solid, flat, level surface, such as a table, shelf or

stereo rack.

Widescreen TV users

If you have a widescreen TV, the TV Aspect Ratio setting (page 41)

of this player should be set to 16:9 (Widescreen).

Don’t...

• Use in a place exposed to high temperatures or humidity,

including near radiators and other heat-generating appliances.

When you watch discs recorded in 4:3 format, you can use the TV

controls to select how the picture is presented. Your TV may offer

various zoom and stretch options; see the instructions that came

with your TV for details.

• Place on a window sill or other place where the player will be

exposed to direct sunlight.

• Use in an excessively dusty or damp environment.

• Place directly on top of an amplifier, or other component in your

stereo system that becomes hot in use.

Please note that some movie aspect ratios are wider than 16:9, so

even though you have a widescreen TV, these discs will still play in

a ‘letter box’ style with black bars at the top and bottom of the

screen.

• Place the player on top of or immediately next to the television or

monitor as you may experience interference.

• Use in a kitchen or other room where the player may be exposed

to smoke or steam.

Standard TV users

If you have a standard TV, the TV Aspect Ratio setting (page 41) of

this player should be set to 4:3 (Standard).

• Use on a thick rug or carpet, or cover with cloth — this may

prevent proper cooling of the unit.

• Place on an unstable surface, or one that is not large enough to

support all four of the unit’s feet.

Resetting the player

Use this procedure to reset all the player’s settings to the factory

default.

Moving the player

If you need to move this unit, first remove the disc, if there’s one

loaded, and close the disc tray. Next, press  STANDBY/ON to

switch the power to standby, checking that the power off indication

in the display goes off. Wait at least 10 seconds. Lastly, disconnect

the power cord.

Make sure that the player is turned on.

Press  to stop playback when a disc is being played back.

Press and hold  and press  STANDBY/ON.

• Use the control buttons on the front panel.

Never lift or move the unit during playback — discs rotate at a high

speed and may be damaged.

• The player turns off with all settings reset.

Caution for when the unit is installed in a rack with a

glass door

Do not press the  OPEN/CLOSE button on the remote control to

open the disc table while the glass door is closed. The door will

hamper movement of the disc table, and the disc table could be

damaged.

Setting up the remote to control your TV

Input the manufacturer code.

Confirm that the TV is responding to the programed code.

While holding down the TV CONTROL  button, input the two digit

code from the table below that corresponds to the make of your TV.

On the remote, press the TV CONTROL  button. If the TV switches

on (or into standby if it was on previously), then you have the correct

code.

For example, if you have a Pioneer TV, press and hold TV CONTROL ,

then press 0, 0 on the remote control.

If nothing happens when you press the TV CONTROL  button,

start again from step 1 using a different code. Some manufacturers

have several codes. Try each one until you find the one that works.

TV Preset code list

Please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for

the manufacturer in the list will not work for the model that you are using.

Manufacturer Code(s)

ACURA 44

ADMIRAL 31

AIWA 60

AKAI 32, 35, 42

AKURA 41

ALBA 07, 39, 41, 44

AMSTRAD 42, 44, 47

ANITECH 44

FRONTECH 31, 42, 46

FRONTECH/PROTECH 32

FUJITSU 48

FUNAI 40, 46, 58

GBC 32, 42

GE 00, 01, 08, 07, 10, 11, 17, 02, 28, 18

GEC 07, 34, 48

GELOSO 32, 44

MAGNAVOX 07, 10, 03, 12, 29

MANESTH 39, 46

MARANTZ 07

SALORA 31, 32, 42, 43

SAMBERS 49

SAMSUNG 07, 38, 44, 46, 69, 70

SANYO 35, 45, 48, 21, 14, 91

SBR 07, 34

SCHAUB LORENZ 42

SCHNEIDER 07, 41, 47

SEG 42, 46

MARK 07

MATSUI 07, 39, 40, 42, 44, 47, 48

MCMICHAEL 34

MEDIATOR 07

MEMOREX 44

ASA 45

GENERAL 29

METZ 31

SEI 32, 40, 49

ASUKA 41

GENEXXA 31, 41

GOLDSTAR 10, 23, 21, 02, 07, 50

GOODMANS 07, 39, 47, 48, 56

GORENJE 38

GPM 41

GRAETZ 31, 42

MINERVA 31, 53

MITSUBISHI 09, 10, 02, 21, 31

MULTITECH 44, 49

NEC 59

NECKERMANN 31, 07

NEI 07, 42

SELECO 31, 42

SHARP 02, 19, 27, 67, 90

SIAREM 32, 49

SIEMENS 31

SINUDYNE 32, 39, 40, 49

SKANTIC 43

AUDIOGONIC 07, 36

BASIC LINE 41, 44

BAUR 31, 07, 42

BEKO 38

BEON 07

BLAUPUNKT 31

BLUE SKY 41

BLUE STAR 18

BPL 18

BRANDT 36

BTC 41

BUSH 07, 41, 42, 44, 47, 56

CASCADE 44

CATHAY 07

GRANADA 07, 35, 42, 43, 48

GRADIENTE 30, 57

GRANDIN 18

GRUNDIG 31, 53

HANSEATIC 07, 42

HCM 18, 44

HINARI 07, 41, 44

HISAWA 18

HITACHI 31, 33, 34, 36, 42, 43, 54, 06, 10, OSUME 48

NIKKAI 05, 07, 41, 46, 48

NOBLIKO 49

SOLAVOX 31

SONOKO 07, 44

SONOLOR 31, 35

SONTEC 07

NOKIA 32, 42, 52

NORDMENDE 32, 36, 51, 52

OCEANIC 31, 32, 42

ORION 32, 07, 39, 40

OSAKI 41, 46, 48

OSO 41

SONY 04

SOUNDWAVE 07

STANDARD 41, 44

STERN 31

SUSUMU 41

CENTURION 07

CGB 42

CIMLINE 44

CLARIVOX 07

CLATRONIC 38

CONDOR 38

24, 25, 18

HUANYU 56

HYPSON 07, 18, 46

ICE 46, 47

IMPERIAL 38, 42

INDIANA 07

OTTO VERSAND 31, 32, 07, 42

PALLADIUM 38

PANAMA 46

PANASONIC 31, 07, 08, 42, 22

PATHO CINEMA 42

PAUSA 44

SYSLINE 07

TANDY 31, 41, 48

TASHIKO 34

TATUNG 07, 48

TEC 42

TELEAVIA 36

CONTEC 44

CROSLEY 32

INGELEN 31

PHILCO 32, 42

PHILIPS 31, 07, 34, 56, 68

PHOENIX 32

PHONOLA 07

PROFEX 42, 44

PROTECH 07, 42, 44, 46, 49

QUELLE 31, 32, 07, 42, 45, 53

R-LINE 07

TELEFUNKEN 36, 37, 52

TELETECH 44

TENSAI 40, 41

THOMSON 36, 51, 52, 63

THORN 31, 07, 42, 45, 48

TOMASHI 18

TOSHIBA 05, 02, 26, 21, 53

TOWADA 42

INTERFUNK 31, 32, 07, 42

INTERVISION 46, 49

ISUKAI 41

ITC 42

ITT 31, 32, 42

CROWN 38, 44

CRYSTAL 42

CYBERTRON 41

DAEWOO 07, 44, 56

DAINICHI 41

DANSAI 07

JEC 05

JVC 13, 23

DAYTON 44

DECCA 07, 48

DIXI 07, 44

DUMONT 53

ELIN 07

ELITE 41

KAISUI 18, 41, 44

KAPSCH 31

KENDO 42

KENNEDY 32, 42

KORPEL 07

KOYODA 44

RADIOLA 07

RADIOSHACK 10, 23, 21, 02

RBM 53

RCA 01, 10, 15, 16, 17, 18, 61, 62, 09

REDIFFUSION 32, 42

REX 31, 46

ULTRAVOX 32, 42, 49

UNIDEN 92

UNIVERSUM 31, 07, 38, 42, 45, 46, 54

VESTEL 07

VICTOR 13

VOXSON 31

ELTA 44

EMERSON 42

ERRES 07

FERGUSON 07, 36, 51

FINLANDIA 35, 43, 54

FINLUX 32, 07, 45, 48, 53, 54

FIRSTLINE 40, 44

FISHER 32, 35, 38, 45

FORMENTI 32, 07, 42

LEYCO 07, 40, 46, 48

LIESENK&TTER 07

LOEWE 07

LUXOR 32, 42, 43

M-ELECTRONIC 31, 44, 45, 54, 56, 07, 36,

ROADSTAR 41, 44, 46

SABA 31, 36, 42, 51

SAISHO 39, 44, 46

WALTHAM 43

WATSON 07

WATT RADIO 32, 42, 49

WHITE WESTINGHOUSE 07

YOKO 07, 42, 46

ZENITH 03, 20

MAGNADYNE 32, 49

MAGNAFON 49

PIONEER 00, 31, 32, 07, 36, 42, 51

BD/DVD language code list

Language (Language code letter), Language code

Japanese (ja), 1001

English (en), 0514

French (fr), 0618

German (de), 0405

Italian (it), 0920

Spanish (es), 0519

Dutch (nl), 1412

Russian (ru), 1821

Chinese (zh), 2608

Korean (ko), 1115

Greek (el), 0512

Catalan (ca), 0301

Corsican (co), 0315

Czech (cs), 0319

Welsh (cy), 0325

Danish (da), 0401

Bhutani (dz), 0426

Esperanto (eo), 0515

Estonian (et), 0520

Basque (eu), 0521

Persian (fa), 0601

Finnish (fi), 0609

Fiji (fj), 0610

Faroese (fo), 0615

Frisian (fy), 0625

Irish (ga), 0701

Scots-Gaelic (gd), 0704

Galician (gl), 0712

Guarani (gn), 0714

Gujarati (gu), 0721

Hausa (ha), 0801

Hindi (hi), 0809

Indonesian (in), 0914

Icelandic (is), 0919

Hebrew (iw), 0923

Yiddish (ji), 1009

Javanese (jw), 1023

Georgian (ka), 1101

Kazakh (kk), 1111

Greenlandic (kl), 1112

Cambodian (km), 1113

Kannada (kn), 1114

Kashmiri (ks), 1119

Kurdish (ku), 1121

Kirghiz (ky), 1125

Burmese (my), 1325

Nauru (na), 1401

Nepali (ne), 1405

Norwegian (no), 1415

Occitan (oc), 1503

Oromo (om), 1513

Oriya (or), 1518

Panjabi (pa), 1601

Polish (pl), 1612

Pashto, Pushto (ps), 1619

Portuguese (pt), 1620

Quechua (qu), 1721

Rhaeto-Romance (rm), 1813

Kirundi (rn), 1814

Romanian (ro), 1815

Kinyarwanda (rw), 1823

Sanskrit (sa), 1901

Sindhi (sd), 1904

Sangho (sg), 1907

Serbo-Croatian (sh), 1908

Sinhalese (si), 1909

Slovak (sk), 1911

Slovenian (sl), 1912

Samoan (sm), 1913

Shona (sn), 1914

Serbian (sr), 1918

Siswati (ss), 1919

Sesotho (st), 1920

Sundanese (su), 1921

Swedish (sv), 1922

Swahili (sw), 1923

Tamil (ta), 2001

Telugu (te), 2005

Tajik (tg), 2007

Thai (th), 2008

Tigrinya (ti), 2009

Turkmen (tk), 2011

Tagalog (tl), 2012

Setswana (tn), 2014

Tonga (to), 2015

Turkish (tr), 2018

Tsonga (ts), 2019

Tatar (tt), 2020

Twi (tw), 2023

Ukrainian (uk), 2111

Urdu (ur), 2118

Uzbek (uz), 2126

Vietnamese (vi), 2209

Volapük (vo), 2215

Wolof (wo), 2315

Xhosa (xh), 2408

Yoruba (yo), 2515

Zulu (zu), 2621

Afar (aa), 0101

Abkhazian (ab), 0102

Afrikaans (af), 0106

Amharic (am), 0113

Arabic (ar), 0118

Assamese (as), 0119

Aymara (ay), 0125

Azerbaijani (az), 0126

Bashkir (ba), 0201

Byelorussian (be), 0205

Bulgarian (bg), 0207

Bihari (bh), 0208

Bislama (bi), 0209

Bengali (bn), 0214

Tibetan (bo), 0215

Breton (br), 0218

Latin (la), 1201

Lingala (ln), 1214

Laothian (lo), 1215

Lithuanian (lt), 1220

Latvian (lv), 1222

Malagasy (mg), 1307

Maori (mi), 1309

Macedonian (mk), 1311

Malayalam (ml), 1312

Mongolian (mn), 1314

Moldavian (mo), 1315

Marathi (mr), 1318

Malay (ms), 1319

Croatian (hr), 0818

Hungarian (hu), 0821

Armenian (hy), 0825

Interlingua (ia), 0901

Interlingue (ie), 0905

Inupiak (ik), 0911

Somali (so), 1915

Albanian (sq), 1917

Maltese (mt), 1320

BD/DVD country/area code list

Country/Area, Country/Area code, Country/Area code letter

Argentina, 0118, ar

Australia, 0121, au

Austria, 0120, at

Belgium, 0205, be

Brazil, 0218, br

Finland, 0609, fi

France, 0618, fr

Germany, 0405, de

Hong Kong, 0811, hk

India, 0914, in

Malaysia, 1325, my

Mexico, 1324, mx

Netherlands, 1412, nl

New Zealand, 1426, nz

Norway, 1415, no

Singapore, 1907, sg

Spain, 0519, es

Switzerland, 0308, ch

Sweden, 1905, se

Taiwan, 2023, tw

Canada, 0301, ca

Chile, 0312, cl

China, 0314, cn

Indonesia, 0904, id

Italy, 0920, it

Japan, 1016, jp

Pakistan, 1611, pk

Philippines, 1608, ph

Portugal, 1620, pt

Thailand, 2008, th

United Kingdom, 0702, gb

United States of America, 2119, us

Denmark, 0411, dk

Republic of Korea, 1118, kr

Russian Federation, 1821, ru

Troubleshooting

Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the

points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If

the trouble cannot be rectified after checking the items below, please contact customer services. In the US, call Toll Free (800) 421-1404.

(Telephone lines are open Monday through Friday 6:00 AM to 4:30 PM (Pacific Time) and Saturday 8:00 AM to 4:30 PM (Pacific Time).) In

Canada, call Local (905) 479-4411, or Long distance +1(877) 283-5901. (Telephone lines are open Monday through Friday 9:00 AM to 5:15 PM

(EST).)

Playback troubleshooting

Problem

Remedy

The disc won’t play or is automatically

ejected after loading.

• Make sure the disc is free from dirt and dust and is not damaged (see Taking care of your player and

discs on page 46).

• Make sure the disc is loaded with the label side face-up and aligned properly in the disc tray guide.

• Incompatible region: If the region on a BD-ROM or DVD-Video disc does not match the region on the

player, the disc cannot be used (see BD-ROM regions and DVD-Video regions on page 10).

• Condensation inside the player: Allow time for condensation to evaporate. Avoid using the player

near an air-conditioning unit.

• Make sure the disc is compatible with this player (see Disc/content format playback compatibility on

page 9).

Problem

Remedy

Picture freezes and the front panel and

remote control buttons stop working.

• Press  (stop), then start playback again ( (play)).

• Press the front panel  STANDBY/ON button to switch the power off, then switch back on and

restart playback. If the power fails to switch off, press and hold  STANDBY/ON for 20 seconds

until the power switches off. Then switch on again by pressing  STANDBY/ON.

• Unplug from the wall socket, then plug back in and switch on again by pressing  STANDBY/ON to

switch the player on.

No picture/No color.

• Incorrect video connections: Check that connections are correct and that plugs are inserted fully.

Also check the video cable for damage.

• TV/monitor or AV amplifier settings are incorrect: Check the instruction manual of the connected

equipment.

• Depending on your display, some of the settings may result in the picture disappearing. In this case,

press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video

resolution on page 14).

• Some BD-ROM discs output video only over HDMI.

The video output is set to 720p/1080i/

1080p, but the actual output is 480i or

480p.

• For copy-protection purposes, DVD-Video and some BD-ROM discs output 480i or 480p over the

component output.

Screen is stretched or aspect does not

change.

• The TV Aspect Ratio or 4:3 Video Out setting in the Initial Setup menu is incorrect. See

TV Aspect Ratio and 4:3 Video Out on page 41 for how to set these correctly for your TV/monitor.

• When output video resolution is set to 720p, 1080i or 1080p, video is output in 16:9 Widescreen

format even if TV Aspect Ratio is set to 4:3 (Standard).

Picture disturbance during playback or

dark image.

• This player is compatible with Macrovision System copy guard. Some discs include a copy

prevention signal, and when this type of disc is played back, stripes etc., may appear on some

sections of the picture depending on the TV. This is not a malfunction.

• Due to the player’s copy protection circuits, connection of this device through a VCR or an AV

selector may cause picture problems. This is not a malfunction.

No audio, or audio is distorted.

• No audio is output during slow motion playback or when scanning contents.

• Check your amplifier/receiver’s settings (volume, input function, speaker settings, etc.).

• Check that the disc is free from dust and dirt, and that it is not damaged (Taking care of your player

and discs on page 46).

• Check that all interconnects are firmly inserted.

• Check that the plugs and terminals are free of dirt, oxide, etc. and clean if necessary. Also check the

cable for damage.

• Make sure the player’s output is not connected to the amplifier’s phono (turntable) inputs.

• Check the Audio Output Mode on page 43. If this is set to 5.1 Channel, output from the AUDIO

OUT (2ch) jacks will be incorrect.

• Check the Speaker Setup on page 45.

• For copy-protection purposes, some BD-ROM discs only output audio over optical/coaxial and

HDMI.

• When Audio CDs containing text files or such data are played back, sound is muted.

The analog audio is OK, but there appears • Check that the Dolby Digital Out and DTS Out settings (page 42) are suitable for your amplifier/

to be no optical/coaxial digital audio

signal.

receiver — check the instruction manual that came with your amplifier/receiver (also check that the

output settings on your amplifier/receiver are correct).

Cannot play multi-channel audio.

• Check the audio options available from the disc menu.

• Multi-channel 192 kHz audio is output in 2 channels.

• Check that the Dolby Digital Out and DTS Out settings (page 42) are suitable for your amplifier/

receiver — check the instruction manual that came with your amplifier/receiver.

• If you connected this player to your amplifier/receiver using the 5.1 channel analog outputs, make

sure the Audio Output Mode (page 43) and Speaker Setup (page 45) are set correctly.

• If you connected this player to your amplifier/receiver using HDMI, or the optical/coaxial digital

outputs, make sure that the output settings on your amplifier/receiver are correct (refer to the

instruction manual that came with your amplifier/receiver).

• To use the 7.1ch setting for Dolby Digital Out, set Dolby Digital  PCM (page 42).

Noise is output when DTS audio is played. • If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable,

set DTS Out to DTS  PCM (page 42). If you do not do this, noise will be output when you play a

DTS disc.

Cannot output 96 kHz or 192 kHz digital

audio from optical/coaxial digital output.

• The player does not output digital audio from the optical/coaxial jacks at this sampling rate. The

digital output is automatically downsampled.

Problem

Remedy

Disc containing PC files won’t play.

• Make sure the disc is compatible with this player (see Disc/content format playback compatibility on

page 9).

• This player is compatible with multi-border discs, but only plays the first border.

• Check that the file complies to one of the supported formats, bit rates or profiles (see File

compatibility on page 9). Also check that the file is not damaged.

• If the message ‘Cannot play this format’ is displayed when you try to play PC files, check the file

formats.

• This player cannot play DRM-protected content on DVD and DRM-protected titles appear in the Disc

Navigator with a lock icon ( ).

No picture or High Definition video output • For copy-protection purposes, composite, S-Video and component video output may not possible.

when watching a BD. See Connecting for HDMI output on page 13 to connect using HDMI.

Image is blurred when you begin playback • Certain televisions cause blur effects when playback of a disc begins. This is not a malfunction.

of a disc.

Tracks/files are repeated during random

play.

• Because tracks/files are selected entirely at random, same tracks/files may be played in quick

succession. For example, ‘Track 1’ may be followed by ‘Track 5,’ only to have ‘Track 1’ play again next.

This is not a malfunction.

SlideShows do not play.

• If you have selected a single file and select Slideshow from the Photo Options menu, then only

that single file is played back. To play a slideshow you must select All Photos from the browse

menu.

Images no longer displayed when you

change the 24p Direct Out setting to On.

• Depending on your display, some of the settings may result in the picture disappearing. In this case,

press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video

resolution on page 14).

CDs cannot be copied on other external

components.

• The audio signals of a CD output at the jacks of this player are protected from copying and cannot

be copied on other external components.

• To copy the audio signals recorded on a CD, connect your external components to the AUDIO OUT

(2ch) jacks of this player.

HDMI troubleshooting

Problem

Remedy

No HDMI video output. (A connected

HDMI component doesn’t work with this

player.)

• This unit has been designed to be compliant with HDMI (High-Definition Multimedia Interface).

Depending on the component you have connected, unreliable signal transfers may result.

• If you connect a DVI device to the HDMI output of this player, ensure that it is compliant with

High-bandwidth Digital Content Protection (HDCP).

• If the front panel HDMI indicator is unlit then:

– Make sure that you’ve selected this player as the HDMI input in the settings for the component

you’re using. You may need to refer to the instruction manual of the component to do this.

– Check that the HDMI cable is connected properly and that the cable isn’t damaged.

• If the front panel HDMI indicator is lit:

– Depending on your display, some of the settings may result in the picture disappearing. In this case,

press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video

resolution on page 14).

• Depending on the HDMI cable being used, 1080p output may not appear correctly.

Colors are too rich or too weak, or black is • Use a different HDMI Color Space setting (page 41).

too deep or appears to ‘float’.

No HDMI audio output.

• If you have connected to an HDCP-compatible DVI component, there won’t be any audio output

from the HDMI terminal. Connect using the optical/coaxial digital outputs (or the analog outputs).

• Verify that the connected HDMI device is compatible with Dolby TrueHD or Dolby Digital Plus (i.e. if

bitstream output is allowed). If the HDMI device is not compatible, the audio will be converted into

Dolby Digital or Linear PCM.

Problem

Remedy

HDMI Control does not function.

• Verify that the HDMI cable is firmly connected.

• Make sure that this unit’s HDMI Control is set to On (page 43).

• Make sure that the HDMI Control for the connected components is set to On. For more information,

refer to the operating manual for the connected component.

• This function may not work properly if you have multiple components connected to a single plasma

display or AV system (amplifier or AV receiver etc.). For more information refer to the operating

manual of your plasma display or AV system.

• You can enable HDMI Control by turning the HDMI Control setting to On for all components

connected via HDMI cable. Check the video output from this unit once you have completed making

connections and settings for all components. You will need to check the video output each time you

change connected components or remove the HDMI cable.

• Check whether the connected component supports HDMI Control or not. For more information refer

to the operating manual of your plasma display or AV system (amplifier or AV receiver etc.).

• Certain functions are not supported on some plasma displays.

• This player does not support HDMI Control-compatible components other than those made by

Pioneer.

• This unit will not function properly with components that do not support HDMI Control, or when

connected with components other than those made by Pioneer.

• The HDMI Control functions may not operate properly if you do not use an HDMI cable that supports

the HDMI 1.3 specification (Category 2) or later.

Network troubleshooting

Problem

Remedy

Home Media Gallery is not available.

• LAN indicator is unlit:

– Check the physical connections (hub, 100BASE-TX, or other cable quality).

• LAN indicator is lit:

– If this player’s IP address is set automatically, make sure that the media server’s address is also set

automatically. If the IP address of the media server has been set manually, set the IP address of the

player manually too (see Network on page 43).

– Check the logical connections (IP address setup, DHCP, etc.). Confirm that the IP address is correct

if acquired using DHCP or Auto-IP in the Network Config. screen that follows the Initial Setup menu

(see page 43).

– Confirm that the media server is on and not in standby or sleep mode.

– Check the network and other settings on the media server.

– Check that this player and the media server are on the same Local Area Network (LAN).

– Check if the media server (Windows Media Player 11, Windows Media Connect or DLNA-compliant)

is running. Restart if necessary.

– Check if the media server is setup correctly for file sharing, if the target folder has been deleted or if

one or more folders has become corrupted on the server.

– Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.

A connected media server does not show • Confirm that the media server is on and not in standby or sleep mode.

up in the source list in the Home Media

Gallery.

• Check the network and other settings on the media server.

• Check that this player and the media server are on the same Local Area Network (LAN).

• Check if the media server (Windows Media Player 11, Windows Media Connect or DLNA-compliant)

is running. Restart if necessary.

• Check if the media server is setup correctly for file sharing, if the target folder has been deleted or if

one or more folders has become corrupted on the server.

• Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.

• Check that there are playable files on the media server.

• After adding a new media server, exit the Home Media Gallery then, after a few moments, re-enter it.

A media server shows up in the source list • Check the media server setup. If a client is registered (authorized) manually, the setup procedure

but is not available (a lock icon (

appears).

)

may have to be run again.

• Check that there are playable files on the media server.

• After adding a new media server, exit the Home Media Gallery then, after a few moments, re-enter it.

Content different from last time appears

on the network (missing items, etc.).

• If the player cannot connect to the same server as last time (because it is switched off, for example),

the player will connect to another server on the network. To see content on a particular server, make

sure it is running and then select it as the source in the Home Media Gallery (see Movie sources on

page 34).

Problem

Remedy

Cannot play or display.

• Check the physical connections (hub, 100BASE-TX, or other cable quality).

• Check if the file complies to the supported format, bit rate or profile (see File compatibility on

page 9). Also check if the file is damaged.

• If the message ‘Cannot play this format’ is displayed when you try to play PC files, check the file

formats.

• It takes time to capture and display a large-sized image; during this time you may have to wait to

operate the player.

• This player cannot play DRM-protected content stored on a DLNA server (not a Windows Media

Player 11 or Windows Media Connect server).

• Some files that comply with one of the supported formats may not play or be displayed.

• Check if there are too many files on the server.

• Check if the PC is operating properly. Reboot the PC after confirming its specification and setup.

Image or sound is interrupted or distorted • Check the physical connections (hub, 100BASE-TX, or other cable quality). It is strongly

(block noise appears).

recommended to use 100BASE-TX for playback quality and display speed.

• When connected by a wireless LAN, check if the bit rate is sufficient.

• Check that the file complies with the supported format, bit rate or profile (see File compatibility on

page 9). Also check if the file is damaged.

• Some files that comply with one of the supported formats may not play or be displayed.

• Check if the PC is operating properly. Reboot the PC after confirming its specification and setup.

Genre (movie), Playlist (music), Album

(photo) or folder configuration differs from

one server to another.

• The configuration may change depending on server type. This is not a malfunction.

An available server is selected but cannot • Check if the server is correctly set up for file sharing, if the target folder has been deleted, or if one or

be navigated.

more folders have been corrupted on the server.

• Check if there are too many files on the server.

‘Cannot connect to server.’ is displayed • The message is displayed when connection to the server failed. Verify that the network cable is

when network downloading is attempt.

connected properly before retrying.

“WRT FAILED” is displayed on the front

panel display during network downloading.

• The message is displayed when downloading failed. As the player may be failed, contact your local

Pioneer Customer Service Center.

Miscellaneous troubleshooting

Problem

Remedy

It is taking a long time for the unit to start • It can take up to one minute for the system to start up once you press the  STANDBY/ON button.

up.

This does not mean that the player is experiencing problems.

The power automatically turns off.

• The Auto Power Off function switches the player into standby if no operation is performed for

30 minutes while the player is stopped or paused (page 43).

• This unit’s power may be turned off when you control this unit from a connected TV. If you do not

want this unit to be turned off in this way, set this unit’s HDMI Control (page 43) to Off.

Your TV and AV system automatically

change inputs.

• The connected TV and AV system automatically may change inputs in response to this unit starting

playback or having the GUI screen (ex. Disc Navigator) displayed. If you do not want your TV and AV

system to change inputs in this way, set this unit HDMI Control (page 43) to Off.

The remote control doesn’t seem to work. • The CONTROL IN jack on the rear panel is connected: Point the remote control at the connected

component to control this player.

• The remote control is too far from the player, or the angle with the remote sensor is too wide: Use

the remote within its operating range (see Using the remote control on page 8).

• The batteries are exhausted: Put in new ones (see Putting the batteries in the remote control on

page 8).

• If you are using an external IR receiver, you may need to set the IR RECEIVER switch (see Using an

external IR receiver with this player on page 17).

Settings are canceled.

• When the power is cut due to power failure or by unplugging the power cord during operation,

settings will be canceled. See Moving the player on page 47 for proper shutdown instructions.

After inserting a disc, a ‘Loading’ message • When you have inserted a disc containing PC files, the time necessary to load the files contained on

is displayed but playback does not begin.

the disc varies by how many files are present. The process can take anywhere from a few minutes to

upwards of ten minutes.

On hybrid discs with BD and DVD layers, • Change the Set hybrid disc playback layer to DVD (page 43).

the DVD layer cannot be played back.

Problem

Remedy

On hybrid discs with BD and CD layers,

the CD layer cannot be played back.

• Change the Set hybrid disc playback layer to CD (page 43).

When the Set hybrid disc playback layer • When the layer set to playback at Set hybrid disc playback layer is not present on an inserted hybrid

is set to DVD and you insert a hybrid disc

with BD and CD layers, the BD layer is

played back.

disc, the BD layer is played back.

The Set hybrid disc playback layer

setting cannot be changed (it is grayed

out).

• You cannot change the Set hybrid disc playback layer when a disc is inserted. Eject the disc to

make changes.

A ‘’ appears in the file name.

• A character that cannot be displayed on this unit is included in the file name. Use only

alphanumeric characters if you want file names to be displayed correctly on this player.

The power automatically turns on.

• This unit’s power may be turned on when you control this unit from a connected plasma display. If

you do not want this unit to be turned on in this way, set this unit’s HDMI Control to Off (page 43).

Dolby Digital Plus

Glossary

Dolby Digital Plus is the next-generation audio technology for all

high-definition programming and media. It combines the efficiency

to meet future broadcast demands with the power and flexibility to

realize the full audio potential expected in the upcoming high-

definition era. Built on Dolby Digital, the multi-channel audio

standard for BD and DVD, Dolby Digital Plus has been designed for

the next-generation AV Systems (amplifier or AV receiver) but

remains fully compatible with all current AV Systems.

Analog audio

An electrical signal that directly represents sound. Compare this to

digital audio which can also be an electrical signal, but is an indirect

representation of sound. See also Digital audio.

Aspect ratio

The width of a TV screen relative to its height. Conventional TVs are

4:3 (in other words, the screen is almost square); widescreen

models are 16:9 (the screen is almost twice as wide as it is high).

Dolby Digital Plus delivers multi-channel audio programs of up to

7.1 channels and supports multiple programs in a single encoded

bitstream with the maximum bit rate potential of 6 Mbps and the

maximum bit rate performance of 1.7 Mbps on BD, and it outputs

Dolby Digital bitstreams for playback on existing Dolby Digital

systems. Dolby Digital Plus can accurately reproduce the sound

originally intended by directors and producers.

BD-J

BD-J is the Java specification for BD-ROM, allowing content

providers to put interactive material linked to specific titles on the

disc.

It also features multi-channel sound with discrete channel output,

interactive mixing and streaming capability in advanced systems.

BDAV

Supported by HDMI (High-Definition Multimedia Interface), a single-

cable digital connection is possible for high-definition audio and

video.

BDAV is one of the application formats used by writable Blu-ray

Discs (BD-R or BD-RE). It corresponds to the VR mode of the DVD

standard.

Dolby TrueHD

BDMV

Dolby TrueHD is the next-generation lossless encoding technology

developed for high-definition optical discs in the upcoming era.

BDMV is one of the Blu-ray Disc standards (application standard for

BD-ROM). It corresponds to the Video mode of the DVD standard.

Dolby TrueHD delivers tantalizing sound that is bit-for-bit identical to

the studio master, unlocking the true high-definition entertainment

experience on high-definition optical discs in the next generation.

Default Gateway

Default Gateway is a node on a computer network that serves as an

access point to another network. A default gateway (such as a

computer and router) is used to forward all traffic that is not

addressed to a station within the local subnet.

When coupled with high-definition video, Dolby TrueHD offers an

unprecedented home theater experience with stunning sound and

high-definition picture.

DHCP (Dynamic Host Configuration Protocol) Server

A DHCP server is a server that allocates IP addresses to hosts

(network devices). In most cases, a broadband router serves as a

DHCP server in a home network.

It supports bit rates of up to 18 Mbps and records up to 8 full-range

channels individually with 24-bit/96 kHz audio. It also features

extensive metadata including dialogue normalization and dynamic

range control. Supported by HDMI (High-Definition Multimedia

Interface), a single-cable digital connection is possible for high-

definition audio and video. BD standards currently limit their

maximum number of audio channels to eight, whereas Dolby Digital

Plus and Dolby TrueHD support more than eight audio channels.

Digital audio

An indirect representation of sound by numbers. During recording,

the sound is measured at discrete intervals by an analog-to-digital

converter, generating a stream of numbers. On playback, a

digital-to-analog converter generates an analog signal based on

these numbers. See also Sampling frequency and Analog audio.

DRM (Digital Rights Management)

DRM is one of several technologies that controls access to and use

of digital data, such as music, movies and other copyrighted

contents.

DTS-HD High Resolution Audio

Progressive scan video

DTS-HD High Resolution Audio provides sound quality which far

outpaces that of the current DVD discs with constant data rates

from 1.5 Mbps to 6.0 Mbps for Blu-ray Disc. DTS-HD High

Resolution Audio is capable of up to 7.1 channels of audio at a

sampling frequency of 96 kHz/24 bits so the original sound is finely

and faithfully reproduced with less disc space compared to DTS-HD

Master Audio. The result of using DTS-HD High Resolution Audio

use is especially significant when watching high definition video as

the sound that is clearer than ever creates the whole new movie

experience right at home.

Also called non-interlaced video, this method of displaying a picture

updates all the lines in one pass, resulting in a more stable,

flicker-free image than interlaced video (for a given scanning rate).

See also Progressive scan video.

IP (Internet Protocol) address

A unique number that devices use in order to identify and

communicate with each other on a network utilizing the Internet

Protocol standard, such as ‘192.168.0.1’. No duplicate numbers are

allowed in the network.

LAN cable

A cable that has an 8-pin modular plug on each end and is different

from a telephone plug which has 4-pins.

MAC (Media Access Control) address

An address attached to the port of any device. The MAC address

cannot be changed.

PCM (Pulse Code Modulation)

A common system of encoding digital audio. Excellent quality, but

requires a lot of data compared to formats such as Dolby Digital and

MPEG audio. For compatibility with digital audio recorders and AV

amplifiers with digital inputs, this unit can convert Dolby Digital,

DTS and MPEG audio to PCM. See also Digital audio.

Pop-up menu (BD only)

A context-sensitive menu that can be used without interrupting

playback of a BD.

License

[MPEG4IP]

This software is based in part on Mozilla Public License 1.1 see http://www.mozilla.org/MPL/for information.

[OpenSSL]

OpenSSL License

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or

other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed

by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”.

4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written

permission. For written permission, please contact [email protected].

5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the

OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for

use in the OpenSSL Toolkit (http://www.openssl.org/)”.

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL

PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson

([email protected]).

Original SSLeay License

This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found

in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the

same copyright terms except that the holder is Tim Hudson ([email protected]).

Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should

be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online

or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or

other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic

software written by Eric Young ([email protected])”

The word ‘cryptographic’ can be left out if the routines from the library being used are not cryptographic related:-).

4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: “This

product includes software written by Tim Hudson ([email protected])”

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING

IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and

put under another distribution licence [including the GNU Public Licence.]

[tiff]

THE SOFTWARE IS PROVIDED “AS-IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION,

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF

USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN

CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

[Howl]

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT

SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This software is based in part on Apple Public Source License or the recent’s rights thereunder see http://developer.apple.com/for information.

[UPNPLib/Intel Stack]

This software is based in part on Intel License see http://www.intel.com/for information.

[JPEG image compression]

If only executable code is distributed, then the accompanying documentation must state that “this software is based in part on the work of the Independent

JPEG Group”.

[libpng]

Randers-Pehrson, and is distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing

Authors

Cosmin Truta

same disclaimer and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors

Simon-Pierre Cadieux

Eric S. Raymond

Gilles Vollant

and with the following additions to the disclaimer:

There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill

any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is

with the user.

same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors:

Tom Lane

Glenn Randers-Pehrson

Willem van Schaik

as libpng-0.88, with the following individuals added to the list of Contributing Authors:

John Bowler

Kevin Bracey

Sam Bushell

Magnus Holmgren

Greg Roelofs

Tom Tanner

For the purposes of this copyright and license, “Contributing Authors” is defined as the following set of individuals:

Andreas Dilger

Dave Martindale

Guy Eric Schalnat

Paul Schmidt

Tim Wegner

The PNG Reference Library is supplied “AS IS”. The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without

limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect,

incidental, special, exemplary, or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such

damage.

Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following

restrictions:

1. The origin of this source code must not be misrepresented.

2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source.

3. This Copyright notice may not be removed or altered from any source or altered source distribution.

The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG

file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated.

A “png_get_copyright” function is available, for convenient use in “about” boxes and the like: printf(“%s”,png_get_copyright(NULL)); Also, the PNG logo (in PNG

format, of course) is supplied in the files “pngbar.png” and “pngbar.jpg (88x31)” and “pngnow.png” (98x31).

Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative.

Glenn Randers-Pehrson

glennrp at users.sourceforge.net

December 3, 2004

[zlib]

This software is based in part on zlib see http://www.zlib.net for information.

[FreeType]

THE FREETYPE PROJECT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS

BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.

[GIFLIB]

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS

BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR

IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

[libhttp]

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer in this position and unchanged.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or

other materials provided with the distribution.

3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The following copyright applies to the base64 code:

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that both the

above copyright notice and this permission notice appear in all copies, that both the above copyright notice and this permission notice appear in all supporting

documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior

permission. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.

THIS SOFTWARE IS PROVIDED BY M.I.T. “AS IS”. M.I.T. DISCLAIMS ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL

M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT

OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

[Vera.ttf/VeraMono.ttf]

Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc.

[TinyLogin]

[Shadow Utilities]

Bigelow & Holmes Inc and URW++ GmbH Luxi font license

[Luxi fonts]

trademark of Bigelow & Holmes Inc.

THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR

OTHER RIGHT. IN NO EVENT SHALL BIGELOW & HOLMES INC. OR URW++GMBH. BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

INCLUDING ANY GEN-ERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR

OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFT-WARE.

[GNU GENERAL PUBLIC LICENSE]

Version 2, June 1991

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to

guarantee your freedom to share and change free software – to make sure the software is free for all its users. This General Public License applies to most of

the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is

covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to

distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the

software or use pieces of it in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate

to certain responsibilities for you if you distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make

sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify

the software.

Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software

is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others

will not reflect on the original authors’ reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain

patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not

licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

GNU GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of

this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program” means either the Program or

any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or

translated into another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is addressed as “you”.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is

not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made

by running the Program). Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and

appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to

the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such

modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed

as a whole at no charge to all third parties under the terms of this License.

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most

ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that

you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License.

(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to

print an announcement.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably

considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as

separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must

be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who

wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to

control the distribution of derivative or collective works based on the Program.

In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a

storage or distribution medium does not bring the other work under the scope of this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2

above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above

on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source

distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a

medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for

noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b

above.)

The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means

all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation

of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source

or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component

itself accompanies the executable.

If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source

code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object

code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify,

sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or

rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program

or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work

based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the

Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy,

distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights

granted herein.

You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed

on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this

License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a

consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all

those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from

distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the

section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section

has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have

made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to

the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder

who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is

permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar

in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and “any later version”,

you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the

Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.

10.If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission.

For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our

decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software

generally.

NO WARRANTY

11.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE

LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT

WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD

THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY

MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS

OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO

OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which

everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of

warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software

Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin

Street, Fifth Floor, Boston, MA 02110-1301 USA.

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it starts in an interactive mode:

Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type ‘show w’. This is free software, and you are welcome to redistribute it under

certain conditions; type ‘show c’ for details.

The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts of the General Public License. Of course, the commands you use may

be called something other than ‘show w’ and ‘show c’; they could even be mouse-clicks or menu items – whatever suits your program.

You should also get your employer (if you work as a programer) or your school, if any, to sign a “copyright disclaimer” for the program, if necessary. Here is a

sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program ‘Gnomovision’ (which makes passes at compilers) written by James Hacker.

<signature of Ty Coon>, 1 April 1989

Ty Coon, President of Vice

This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider

it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of

this License.

[GNU LESSER GENERAL PUBLIC LICENSE]

Version 2.1, February 1999

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to

guarantee your freedom to share and change free software – to make sure the software is free for all its users. This license, the Lesser General Public License,

applies to some specially designated software packages – typically libraries – of the Free Software Foundation and other authors who decide to use it. You can

use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular

case, based on the explanations below.

When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom

to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the

software and use pieces of it in new free programs; and that you are informed that you can do these things.

To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions

translate to certain responsibilities for you if you distribute copies of the library or if you modify it.

For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure

that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they

can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We

protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute

and/or modify the library.

To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed

on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might

be introduced by others.

Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users

of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must

be consistent with the full freedom of use specified in this license.

Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License,

applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit

linking those libraries into non-free programs.

When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative

of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser

General Public License permits more lax criteria for linking other code with the library.

We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General Public License. It also

provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary

General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances.

For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard.

To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free

libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.

In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example,

permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU

Linux operating system.

Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program that is linked with the Library

has the freedom and the wherewithal to run that program using a modified version of the Library.

The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library”

and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run.

GNU LESSER GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party

saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”.

A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of

those functions and data) to form executables.

The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either

the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications

and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.)

“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code

for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using

the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use

of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.

1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and

appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to

the absence of any warranty; and distribute a copy of this License along with the Library.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications

or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) The modified work must itself be a software library.

b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.

c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an

argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such

function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute

square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied

function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably

considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as

separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must

be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who

wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to

control the distribution of derivative or collective works based on the Library.

In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or

distribution medium does not bring the other work under the scope of this License.

3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter

all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version

than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other

change in these notices.

Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and

derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.

4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and

2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of

Sections 1 and 2 above on a medium customarily used for software interchange.

If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the

same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object

code.

5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a

“work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.

6. However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains portions of the

Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of such

executables.

When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the

Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself

a library. The threshold for this to be true is not precisely defined by law.

7. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less

in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus

portions of the Library will still fall under Section 6.)

Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing

that work also fall under Section 6, whether or not they are linked directly with the Library itself.

8. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions

of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer’s own use and

reverse engineering for debugging such modifications.

You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You

must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among

them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:

a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work

(which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable

“work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable

containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to

recompile the application to use the modified definitions.)

b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already

present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of

the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.

c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge

no more than the cost of performing this distribution.

d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from

the same place.

e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.

For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for reproducing the executable

from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary

form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself

accompanies the executable.

It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating

system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.

9. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this

License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is

otherwise permitted, and provided that you do these two things:

a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed

under the terms of the Sections above.

b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying

uncombined form of the same work.

10.You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy,

modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have

received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

11.You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or

its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work

based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library

or works based on it.

12.Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy,

distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of

the rights granted herein. You are not responsible for enforcing compliance by third parties with this License.

13.If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed

on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this

License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a

consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those

who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution

of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to

apply, and the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section

has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have

made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to

the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

14.If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who

places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted

only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

15.The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be

similar in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and “any later version”,

you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the

Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.

16.If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask

for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions

for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and

reuse of software generally.

NO WARRANTY

17.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE

LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT

WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE

LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

18.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY

MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS

OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE

WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Libraries

If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute

and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).

To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion

of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software

Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS

FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin

Street, Fifth Floor, Boston, MA 02110-1301 USA

Also add information on how to contact you by electronic and paper mail.

You should also get your employer (if you work as a programer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a

sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a library for tweaking knobs) written by James Random Hacker.

<signature of Ty Coon>, 1 April 1990

Ty Coon, President of Vice

That’s all there is to it!

[Linux Source Notice]

The software programs used on this product include the Linux operating system. The Linux contains software licensed for use based on the terms of a GNU

General Public License. The machine readable copy of the corresponding source code is available for the cost of distribution.

For more information or to obtain a copy, contact your local Pioneer Customer Service center.

Details of the GNU General Public License can be found at the GNU website (http://www.gnu.org).

Audio characteristics

Specifications

Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hz to 22 kHz

S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 dB

Dynamic range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 dB

General

Total harmonic distortion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.0015 %

Wow and flutter . . . . . . . . . . . . Limit of measurement (0.001 % W. PEAK) or lower

System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Blu-ray Disc PLAYER

(BD-ROM, DVD-Video, DVD-R/-RW, CD, network file playback)

Power requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz

Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 W

Power consumption (standby) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.5 W

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6 kg (14 lb 9 oz)

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 420 mm (W) x 103 mm (H) x 353 mm (D)

(16 9/16 in. (W) x 4 1/16 in. (H) x 13 15/16 in. (D))

Digital output

Optical digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optical digital jack

Coaxial digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jack

Other terminals

LAN terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ethernet jack (100BASE-TX)

Control in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minijack (3.5 ø)

IR in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minijack (3.5 ø)

Operating temperature . . . . . . . . . . . . . . . . . . . +5 °C to +35 °C (+41 °F to +95 °F)

Operating humidity . . . . . . . . . . . . . . . . . . . . . . . . . . .5 % to 85 % (no condensation)

HDMI output

Accessories

HDMI output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-pin

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

AA/R6P dry cell batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Stereo audio cable (red/white plugs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Video cable (yellow plugs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

LAN cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Power cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Operating instructions

Component Video output (Y, PB, PR

)

Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Y: 1.0 Vp-p (75 Ω)

PB, PR: 0.7 Vp-p (75 Ω)

Jacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jacks

S-Video output

Y (luminance) - Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p (75 Ω)

C (color) - Output level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286 mVp-p (75 Ω)

Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-Video jack

The specifications and design of this product are subject to change without notice.

Video output

Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p (75 Ω)

Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jack

Audio output (1 stereo pair)

Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . During audio output

200 mVrms (1 kHz, –20 dB)

Number of channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jack

Audio output (multi-channel/L, R, C, SW, LS, RS)

Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . During audio output

200 mVrms (1 kHz, –20 dB)

Number of channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RCA jack

Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer

Authorized Independent Service Company, or if you wish to purchase replacement parts,

operating instructions, service manuals, or accessories, please call the number shown

below.

1 – 8 0 0 – 4 2 1 – 1 4 0 4

Please do not ship your product to Pioneer without first calling the Customer Support at the

above listed number for assistance.

Pioneer Electronics Service, Inc.

P.O. BOX 1760, Long Beach,

CA 90801-1760, U.S.A.

For warranty information please see the Limited Warranty sheet included with your product.

Should this product require service in Canada, please contact a Pioneer Canadian

Authorized Dealer to locate the nearest Pioneer Authorized Service Company in Canada.

Alternatively, please contact the Customer Satisfaction Department at the following address:

Pioneer Electronics of Canada, Inc.

Customer Satisfaction Department

300 Allstate Parkway, Markham, Ontario L3R 0P2

1-877-283-5901

905-479-4411

For warranty information please see the Limited Warranty sheet included with your product.

Si ce produit doit être réparé au Canada, veuillez vous adresser à un distributeur autorisé

Pioneer du Canada pour obtenir le nom du Centre de Service Autorisé Pioneer le plus près

de chez-vous. Vous pouvez aussi contacter le Service à la clientèle de Pioneer:

Pioneer Électroniques du Canada, Inc.

Service Clientèle

300, Allstate Parkway, Markham, Ontario L3R 0P2

1-877-283-5901

905-479-4411

Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la

garantie restreinte qui accompagne le produit.

S018_C_EF

http://www.pioneerelectronics.com (US)

http://www.pioneerelectronics.ca (Canada)

PIONEER CORPORATION

4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC.

P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300

PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.

Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270

K002_B_En

PIONEER, ELITE, SOUND.VISION.SOUL, and the Pioneer, Elite and

sound.vision.soul logos are trademarks of Pioneer Corporation.

Published by Pioneer Corporation.

<07I000001>

<VRB1478-A>

Printed in Japan

Philips HR1727 User Manual
Philips AQ6549 User Manual
Oster BCCG08 User Manual
NEC LCD300 User Manual
LG Electronics GBW H20N User Manual
KitchenAid KFPW760QER0 User Manual
KitchenAid 4KFP720ER2 User Manual
Kicker SOLOCLASSIC S12C User Manual
Kenwood KRC 208S User Manual
Kambrook KBL210 User Manual