Upgrade procedure for the
Parrot CK3100, CK3300, CK3500
This document will help you in order to upgrade your
Hands-free car kit via Bluetooth. Car kit upgrades are
needed to improve the compatibility of your Parrot device,
by allowing you to use more phones with your kit. It can
also allow you to get new functionalities.
You will find hereunder two different possibilities to upgrade
the Parrot CK3100 via Bluetooth.
Software upgrades remove paired phones, synchronized
contacts and voice tags.
1
2
Downloading the upgrade files ...................................................................................... 1
Upgrading the Parrot CK3100 ....................................................................................... 3
2.1 By serial cable........................................................................................................... 3
2.2 By Bluetooth (Method A) ........................................................................................... 5
2.2.1 Using stack Toshiba ......................................................................................... 5
2.2.2 Using stack Broadcom and Microsoft................................................................ 9
2.3 By Bluetooth (Method B).............................................................................................12
1 Downloading the upgrade files
Before you begin:
Download and install the Parrot Software Update Tool
choose SUPPORT and DOWNLOAD.
1. Start the Parrot Software Update Tool program.
► The following dialog box is displayed.
2. Click Next.
1
6. Select your language.
7. Click on Download Now and wait until the end of the download
.
► The downloaded files will be stored in C:\Program Files\ Parrot Software Update
Tool\Internet Files.
2 Upgrading the Parrot CK3100
There are three methods to upgrade your Parrot CK3100: one by serial cable (§2.1) and two by
Bluetooth (§2.2 and 2.3)
.
2.1 By serial cable
Before you begin:
•
•
•
Download the upgrade you wish to install.
Connect your computer to your carkit via the serial cable.
Keep the Parrot CK3100 off.
1. Start the Parrot Software Update Tool and click Next.
2. Choose the Parrot CK3100 and click Next.
3. Get the previously downloaded files by clicking on Browse and click Next.
4. Select Serial connection and click Next.
3
5. Select the COM port on which you have connected the serial cable and click Next.
6. When the Parrot Software Update Tool reaches the “XPRAM downloading” step, plug in
the car kit’s power supply.
7. Wait until the end of the upgrade process and click on Finish.
► You can now disconnect your car kit from the computer.
► Your Parrot CK3100 is now up-to-date.
4
Wait for the automatic reboot of the kit.
Do not stop the power source!
This operation can take few minutes.
2.2 By Bluetooth (Method A)
2.2.1 Using the Toshiba stack
Before you begin:
•
•
Download the upgrade you wish to install.
Make sure that your Bluetooth device is correctly installed on
your computer (refer to its user guide for additional
information).
1. Switch on your kit and activate the Software update option that you can find in the Settings
> Advanced Settings menu.
2. Launch a Bluetooth devices search with the software provided with your Bluetooth dongle or
with the Windows Bluetooth manager. To do so :
a. Right click on the Bluetooth icon
on the toolbar.
b. Select Add New Connection.
► The following window is displayed.
5
c. Select Custom Mode and click Next. The devices available are displayed
3. Select your Parrot CK3100 device to start the service discovery.
► The following window is displayed.
4. Enter the Bluetooth PIN code : « 1234 » and click OK.
► The Bluetooth services supported by the Parrot CK3100 are now listed.
5. Select UPDATE and click Next.
6
► An outgoing COM Port is provided by the Bluetooth software during the connection. In
our example the outgoing COM Port is number 40.
Write this number down, it will be required in the Parrot Software Update Tool.
However depending on the specificity of your Bluetooth interface it might be
slightly different (refer to your Bluetooth equipment user manual for further
explanations).
6. Start Parrot Software Update Tool and click Next.
7. Select the Parrot CK3100 and click Next.
8. Get the previously downloaded files by clicking on Browse and click Next.
9. Select Bluetooth virtual serial connexion and click Next.
10. Select the right COM port, which has been previously assigned (COM40 in our example)
and click Next.
7
11. Wait while the Parrot Software Update Tool is passing the different upgrade steps and
Finish.
Wait for the automatic reboot of the kit. Do not
stop the power source!
This operation can take few minutes.
► Your Parrot CK3100 is now up to date.
8
2.2.1 Using Broadcom and Microsoft stacks
Before you begin:
•
•
Download the upgrade you wish to install.
Make sure that your Bluetooth device is correctly installed on
your computer (refer to its user guide for additional
information).
1. Switch on your kit and activate the Software update option that you can find in the Settings
> Advanced Settings menu.
2. Launch a Bluetooth devices search with the software provided with your Bluetooth dongle or
with the Windows Bluetooth manager. To do so :
a. Right click on the Bluetooth icon
on the toolbar.
b. Select Add a Bluetooth Device.
► The following window is displayed.
c. Select My device is set up and ready to be found and click Next.
► The devices available are displayed.
3. Select your Parrot CK3100 and click Next.
► The following window is displayed.
9
4. Select Let me choose my own passkey then enter the Bluetooth PIN code : « 1234 » and
click Next.
5. Wait until the connection is established then click Finish.
6. An outgoing COM Port is provided by the Bluetooth software during the connection. In our
example the outgoing COM Port is number 46.
Write this number down, it will be required in the Parrot Software Update Tool.
However depending on the specificity of your Bluetooth interface it might be
slightly different (refer to your Bluetooth equipment user manual for further
explanations).
7. Start Parrot Software Update Tool and click Next.
8. Select the Parrot CK3100 and click Next.
9. Get the previously downloaded files by clicking on Browse and click Next.
10. Select Bluetooth virtual serial connexion and click Next.
10
11. Select the right COM port, which has been previously assigned (COM40 in our example)
and click Next.
10. Wait while the Parrot Software Update Tool is passing the different upgrade steps and
Finish.
11
Wait for the automatic reboot of the kit. Do not
stop the power source!
This operation can take few minutes.
► Your Parrot CK3100 is now up to date.
2.2 By Bluetooth (Method B)
Use the following method if your PC is equipped with the Broadcom or the Microsoft stack.
Before you begin:
•
•
Make sure that your Bluetooth equipment is correctly installed.
Download the upgrade file you wish to install.
1. Switch on your kit and activate the Software update option that you can find in the Settings
> Advanced Settings menu.
2. Start Parrot Software Update Tool and click Next.
3. Select the Parrot CK3100 and click Next.
4. Get the previously downloaded files by clicking on Browse and click Next.
5. Select Bluetooth connexion and click Next.
12
6. On the following window, click on Search devices and wait while searching for visible
devices.
7. In the list select Parrot CK3100 and click Next.
8. If requested enter the Bluetooth PIN code: « 1234 ».
9. Wait while the Parrot Software Update Tool is passing the different upgrade steps and click
on Finish.
Wait for the automatic reboot of the kit. Do not stop the power
source!
This operation can take few minutes.
►
Your Parrot CK3100 is now up to date.
Contact your dealer: he is always available to help you
13
|