Specifications
Screen Size:
System:
13 inch 4:3TFT
PAL/NTSC
Display Method:
TFT Active matrix system
Power source/Consumption: DC12V+/-20%, 15W
Storage Temperature:
Display Method :
Monitor dimension:
Pixs:
-10 ~ +85
Color LCD
325x275x30mm
800x600
13 TFT LCD COLOR MONITOR
Weight:
900g
Instruction Manual
Cautions
Never connect the car adaptor to cigarette lighters for such as trucks
or buses which use 12V DC power.
Do not expose the monitor to high humidity, dust, steam,oily smoke,
direct sunlight etc.
For your safety, turn power OFF when not in use and unplug the adaptor.
Never attempt your own maintenance. Consult your TV dealer or the
company.
Avoid dropping and strong impact.
For your safety, the driver should not watch the Monitor or operate the
controls while driving.
Accessories
1xRemote control
1xinstruction manual
WARNING:
DO NOT WATCH MONITOR WHILE VEHICLE IN MOTION.
IT CAN BE HAZARDOUS.
WARNING:
HAZARD DO NOT OPERATE THIS
UNIT UNLESS VEHICLE ISPARKED
IN SAFE ANDLEGAL AREA
PLVW1342
5
Pannel
WIRING DIAGRAM
Read all wiring precautions .If you are not sure of the connections ,contact your
authorized dealer.
1.Disconnect the negative(-) lead of the battery before making any power
connections.
10
11
2.When creating passage holes for the power wires ,use grommets to eliminate
any sharp edges created during drilling .This will protect the wire from being
nicked and causing a short circuit .
12
3.When connecting the ground lead ,fasten the ground lead(black) securely to a
clean metal plate on the vehicle .
1
2
3
4
5
6
7
8
9
1.LED
2.Power
3.AV1
4.AV2
5.+
6.MENU
7.-
8.RSI
9.IR
10.Dome light
12.Dome light switch
11.Monitor release button
4
REMOTE CONTROL
1
FUSE 2A
5
1.Power ON/OFF the monitor
2.Contrast positive adjustment
3.Switch between V1 and V2
4.Brightness positive adjustment
5.Brightness negative adjustment
6.Contrast negative adjustment
7.Saturation negative adjustment
8.Saturation positive adjustment
6
2
3
7
8
AV
12V
PLAYER
TFT-LCD
BATTERY
MONITOR REMOTE
2
3
|