DIGITAL CAMERA
SZ-10/SZ-20
Instruction Manual
● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these
instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for
future reference.
● We recommend that you take test shots to get accustomed to your camera before taking important photographs.
● In the interest of continually improving products, Olympus reserves the right to update or modify information
contained in this manual.
● This manual covers the SZ-10 and SZ-20. The camera illustrations on this manual is of SZ-10. Unless otherwise
specified, the explanation about these illustrations is provided for SZ-10 and SZ-20.
Camera Settings
Using the Direct Buttons
Frequently used functions can be accessed using the direct buttons.
Zoom lever (p. 21, 24)
Shutter button (p. 20, 60)
R button (record movies) (p. 20)
qbutton (switching between
shooting and playback) (p. 20,
22, 49)
m button (p. 6)
E button (camera guide/
menu guide) (p. 26)
3
EN
Operation guide
Wheel controller
F (up) /
The symbols FGHI displayed for image selections
and settings indicate that the wheel controller is to
be used by pressing, not turning, the wheel controller
sections shown on the right.
INFO button (changing information
display) (p. 22, 25)
4/30
X
Y
M
D
Time
14M
NORM
Y/M/D
2011.02.26 00:00
FILE
100 0004
’11/02/26 00:00
H (left)
I (right)
OK
Print
More
MENU
OK
Set
Single Print
Cancel
Operation guides displayed at the bottom of the screen
indicate that the m button, A button, or zoom lever
A button
can be used.
G (down) /
D button (erase) (p. 24)
1
Reset
2
Image Size
Compression
Shadow Adjust
AF Mode
14M
Normal
Auto
The wheel controller can also be used
to change the selections.
1
2
3
Face/iESP
ESP
ESP/
Digital Zoom
Off
4/30
MENU
OK
Set
Exit
OK
Set
OK
MENU
Erase/Cancel
Operation guide
4
EN
Using the Menu
Use the menu to change camera settings such as the shooting mode.
There may be menus that are unavailable depending on other related settings or the shooting mode.
Function menu
Press H during shooting to display the function menu. The function menu is used to choose the shooting mode
and provides access to frequently used shooting settings.
Selected option
Shooting mode
Program Auto
3D
P
Function menu
Setup menu
0.0
WB
AUTO
ISO
AUTO
14M
4
Shooting
To select the shooting mode
Use HI to select the shooting mode and press the A button.
To select the function menu
Use FG to select a menu and use HI to select a menu option. Press the A
button to set the function menu.
5
EN
Setup menu
Press the m button during shooting or playback to display the setup menu. The setup menu provides access
to a variety of camera settings, including options not listed in the function menu, display options, and the time and
date.
1
Press the m button.
● The setup menu is displayed.
4
Use FG to select the desired submenu 2
and then press the A button.
● Once a setting is selected, the display returns to
the previous screen.
1
Reset
2
Image Size
14M
Normal
Auto
Compression
Shadow Adjust
AF Mode
There may be additional operations. “Menu
Settings” (p. 38 to 54)
1
2
3
Face/iESP
ESP
ESP/
1
Digital Zoom
Off
Reset
2
Image Size
Compression
Shadow Adjust
AF Mode
14M
Normal
Auto
MENU
OK
Set
Exit
2
Press H to select the page tabs. Use FG
to select the desired page tab and press I.
1
2
3
Face/iESP
ESP
ESP/
Digital Zoom
MENU
On
Page tab
Submenu 1
OK
Set
Exit
1
1
2
Reset
Reset
2
Image Size
14M
Normal
Auto
Image Size
Compression
Shadow Adjust
AF Mode
14M
Normal
Auto
5
Press the m button to complete the
setting.
Compression
Shadow Adjust
AF Mode
ESP/
1
2
3
Face/iESP
ESP
1
2
3
Face/iESP
ESP
ESP/
Digital Zoom
MENU
Off
Digital Zoom
Off
OK
MENU
OK
Set
Exit
Set
Exit
3
Use FG to select the desired submenu 1
and then press the A button.
Submenu 2
1
2
1
Reset
Reset
Digital Zoom
Image Size
Compression
Shadow Adjust
AF Mode
ESP/
14M
Normal
Auto
2
Image Size
Compressio
Shadow Adju
AF Mode
Off
On
1
2
3
1
2
3
Face/iESP
ESP
ESP/
Digital Zoom
MENU
Off
Digital Zoom
OK
MENU
OK
Set
Exit
Set
Back
6
EN
Menu Index
Menus for Shooting Functions
Program Auto
1
9
1
2
3D
P
Reset
Image Size
Compressio
Shadow Adju
AF Mode
1
2
Image Stabilizer
ON
2
3
4
5
6
7
8
AF Illuminat.
1
2
Image Size
720p
Normal
Off
Rec View
Image Quality
1
2
3
Pic Orientati
Is Movie Mode
ESP/
0.0
1
2
3
Icon Guide
WB
On
Digital Zoom
R
AUTO
Date Stamp
1
2
3
MENU
Exit
ISO
AUTO
MENU
Exit
0
14M
4
MENU
OK
Exit
Set
a
Pic Orientation..................p.42
Icon Guide........................p.42
Date Stamp ......................p.42
1 Shooting mode
8 Drive.................................p.37
9 p (Shooting menu 1)
P (Program Auto).............p.19
M (iAUTO)...................p.28
s (Scene Mode) .........p.28
P (Magic Filter) ..........p.29
p (Panorama)..................p.30
W (3D) ............................p.32
2 Flash.................................p.34
3 Macro ...............................p.34
4 Self-timer..........................p.35
5 Exposure compensation...p.35
6 White balance...................p.36
7 ISO ...................................p.36
Reset................................p.38
Image Size .......................p.39
Compression ....................p.39
Shadow Adjust..................p.40
AF Mode...........................p.40
ESP/n ...........................p.40
Digital Zoom .....................p.41
0 q (Shooting menu 2)
a A (Movie menu)
Image Size .......................p.39
Image Quality ...................p.39
IS Movie Mode .................p.41
R (Movie sound recording)
......................................p.43
Image Stabilizer................p.41
AF Illuminat. ....................p.41
Rec View ..........................p.42
7
EN
Menus for Playback, Editing, and Printing Functions
1 q(Playback)
Slideshow..................... p.44
Photo Surfing................ p.44
Edit ............................... p.45
Erase............................ p.46
Print Order.................... p.47
R (Protect).................... p.47
y (Rotate).................... p.47
1
Slideshow
2
Photo Surfing
Edit
1
Erase
1
2
3
Print Order
R
y
MENU
OK
Set
Exit
Menus for Other Camera Settings
File Name..................... p.50
Pixel Mapping............... p.51
s (Monitor)................ p.51
TV Out.......................... p.51
Power Save.................. p.53
l (Language) ........... p.53
3 t (Settings 3)
X(Date/time)............. p.54
World Time ................... p.54
Data Repair .................. p.54
1 r (Settings 1)
Memory Format/
1
2
Memory Format
Backup
Format ........................ p.48
Backup ......................... p.48
Eye-Fi........................... p.48
USB Connection........... p.49
qPower On ............... p.49
Eye-Fi
Off
Auto
Yes
USB Connection
q
1
2
3
Power On
1
2
3
z
Keep Settings
Pw On Setup
MENU
Yes
Off
z
Keep Settings............ p.49
Pw On Setup ................ p.49
2 s (Settings 2)
OK
Set
Exit
Sound Settings............. p.50
8
EN
Names of PParts
Camera unit
1
2
3
4
5
n button.......p. 17, 19
Shutter button........p. 20, 60
Zoom lever.............p. 21, 24
Connector cover ....p. 14, 16
Multi-connector
10
11
1
2
3
..................p. 14, 16, 52, 55
HDMI micro connector
4
6
....................................p. 52
Strap eyelet .................p. 10
Battery/card compartment
lock .............................p. 13
Battery/card compartment
cover...........................p. 13
5
6
7
8
12
7
9
10 Indicator lamp........p. 14, 16
11 Flash switch.................p. 34
12 Lens.............................p. 65
13 Tripod socket
8
9
13
15
SZ-10
SZ-20
14 Flash............................p. 34
15 Microphone............p. 43, 45
16 AF illuminator...............p. 41
Self-timer lamp ............p. 35
15
14
16
14
15
16
9
EN
1
2
3
Speaker
Monitor.......p. 11, 19, 51, 60
R button (record movies)
....................................p. 20
2
4 qbutton (switching
between shooting and
playback)
3
4
5
........................p. 20, 22, 49
1
5
6
A button (OK)...............p. 4
Wheel controller.............p. 4
INFO button (changing
6
information display)
7
8
..............................p. 22, 25
D button (erase).........p. 24
E button (camera guide/
menu guide)................p. 26
m button..............p. 3, 6
7
8
Attacching the camera sstrap
Pull the strap tight so that it does not come loose.
10
EN
Monitor
Shooting mode display
1
2
3
Battery check..........p. 16, 61 15 Shadow Adjustment
1
2
Shooting mode .......p. 19, 28
Technology..................p. 40
P
Flash.............................p. 34 16 Compression (still images)
25
24
3
4
5
6
7
8
9
Flash standby/flash charge
....................................p. 60 17 Image size (still images)
Macro/super macro ......p. 34 ..............................p. 39, 68
Self-timer......................p. 35 18 Number of storable still
..............................p. 39, 68
23
22
21
0.0
4
5
6
WB
AUTO
ISO
AUTO
Exposure compensation
pictures (still images)
00:34
20
14M
DATE
19
4
NORM
....................................p. 35
....................................p. 19
7
8
9
White balance...............p. 36 19 Current memory ...........p. 67
ISO ...............................p. 36 20 Movie recording icon ....p. 20
Drive.............................p. 37 21 Remaining recording time
(movies)......................p. 20
(movies)......................p. 43 22 Image size (movies)
18 1716 15 14 13 12 11 10
1/100 F3.0
10 Recording with sound
27 26
11 Date stamp...................p. 42
..............................p. 39, 69
12 World time ....................p. 54 23 Histogram.....................p. 22
13 Image stabilization (still
images)/Digital image
stabilization (movies)
24 AF target mark..............p. 20
25 Camera shake warning
26 Aperture value..............p. 20
....................................p. 41 27 Shutter speed...............p. 20
14 Metering .......................p. 40
11
EN
Playback mmode display
1
2
3
4
Battery check..........p. 16, 61
Grouped image.............p. 23
3D image......................p. 26
Print reservation/number of
prints..................p. 58/p. 57
Eye-Fi transferred.........p. 48
Protect..........................p. 47
Adding sound .........p. 43, 45
Current memory ...........p. 67
Frame number/total number
of images (still images)
● Standard display
1 2
3
4
5 6
7
8 9
1
3D
10
4/30
5
6
7
8
9
10
9
00:12/00:34
’11/02/26 00:00
20
11
Still image
Movie
....................................p. 22
Elapsed time/total
recording time (movies)
● Advanced display
....................................p. 23
1 2
3
4
5 6
7
8 9
12
13 14 15
10 Volume ...................p. 23, 50
11 Histogram.....................p. 22
12 Shutter speed...............p. 20
13 Aperture value..............p. 20
14 ISO ...............................p. 36
15 Exposure compensation
....................................p. 35
16 White balance...............p. 36
17 Compression (still images)
..............................p. 39, 68
Image quality (movies)
3D
10
4/30
1/1000 F3.0
2.0
ISO WB
100 AUTO
22
21
16
17
18
P
1/1000 F3.0
2.0
ISO WB
100 AUTO
14M
NORM
P
FILE
14M
19
20
NORM
100 0004
FILE
100 0004
’11/02/26 00:00
’11/02/26 00:00
..............................p. 39, 69
18 Image size........p. 39, 68, 69
19 File number
20 Date and time.........p. 17, 54
21 Shadow Adjustment
Technology..................p. 40
22 Shooting mode .......p. 19, 28
12
EN
Preparing tthe Caamera
Inserting the battery
Turn off the camera before opening the battery/card
compartment cover.
When using the camera, be sure to close the battery/
card compartment cover.
1
Battery/card
compartment cover
2
3
1
1
2
Battery/card compartment lock
2
Charging the battery and setting up
using the supplied CD
Connect the camera to the computer to charge the battery
and use the supplied CD for setup.
User registration using the supplied CD and
installation of [ib] computer software is available on
Windows computers only.
The camera battery can be charged while the camera is
connected to a computer.
Battery lock knob
● The indicator lamp lights during charging and turns
off when charging is complete.
Insert the battery as illustrated with the Cmark
toward the battery lock knob.
Damage to the battery exterior (scratches, etc.) may
produce heat or an explosion.
Charging takes up to 3.5 hours.
If the indicator lamp does not light, the camera is not
correctly connected or the battery, camera, computer,
or USB cable may not be functioning as expected.
Insert the battery while sliding the battery lock knob in
the direction of the arrow.
We recommend that you use a computer equipped
with Windows XP (Service Pack 2 or later), Windows
Vista, or Windows 7. See “Charging the battery with
the included USB-AC adapter” (p. 16) if you are using
a different computer or wish to charge the battery
without using a computer.
Slide the battery lock knob in the direction of the
arrow to unlock, and then remove the battery.
13
EN
Windows
Connectiing the camera
Insert the supplied CD in a CD-ROM drive.
1
Windows XP
● A “Setup” dialog will be displayed.
Indicator lamp
Windows Vista/Windows 7
● An Autorun dialog will be displayed. Click “OLYMPUS
Setup” to display the “Setup” dialog.
Multi-connector
USB cable
(supplied)
Connector
cover
Computer (on
and running)
If the “Setup” dialog is not displayed, select “My
Computer” (Windows XP) or “Computer” (Windows
Vista/Windows 7) from the start menu. Double-click
the CD-ROM (OLYMPUS Setup) icon to open the
“OLYMPUS Setup” window and then double-click
“Launcher.exe”.
If a “User Account Control” dialog is displayed, click
“Yes” or “Continue”.
Register your Olympus product.
● Click the “Registration” button and follow the on-
screen instructions.
3
Follow the on-screen instructions on your
2
computer.
Install OLYMPUS Viewer 2 and [ib] computer
software.
● Check the system requirements before beginning
4
If nothing is displayed on the camera screen even
after connecting the camera to the computer, the
battery may be exhausted. Leave the camera
connected to the computer until the battery has
charged, then disconnect and reconnect the camera.
installation.
● Click the “OLYMPUS Viewer 2” or “OLYMPUS ib”
button and follow the on-screen instructions to
install the software.
14
EN
Macintosh
OLYMPUS Viewer 2
Insert the supplied CD in a CD-ROM drive.
● Double-click the CD (OLYMPUS Setup) icon on
the desktop.
Operating
System
Windows XP (Service Pack 2 or later)/
Windows Vista/Windows 7
1
Processor
Pentium 4 1.3 GHz or better
●
Double-click the “Setup” icon to display the “Setup” dialog.
1 GB or more (2 GB or more
recommended)
RAM
Free Hard
Drive Space
1 GB or more
1024 x 768 pixels or more
Minimum 65,536 colors (16,770,000
colors recommended)
Monitor
Settings
[ib]
Operating
System
Windows XP (Service Pack 2 or later)/
Windows Vista/Windows 7
Install OLYMPUS Viewer 2.
● Check the system requirements before beginning
installation.
2
Pentium 4 1.3 GHz or better
(Pentium D 3.0 GHz or better required
for movies)
Processor
● Click the “OLYMPUS Viewer 2” button and follow
the on-screen instructions to install the software.
512 MB or more (1 GB or more
recommended)
RAM
(1 GB or more required for movies—2 GB
or more recommended)
OLYMPUS Viewer 2
Operating
System
Mac OS X v10.4.11–v10.6
Free Hard
Drive Space
1 GB or more
Processor
Intel Core Solo/Duo 1.5 GHz or better
1024 x 768 pixels or more
Minimum 65,536 colors (16,770,000
colors recommended)
Monitor
Settings
1 GB or more (2 GB or more
recommended)
RAM
Free Hard
Drive Space
A minimum of 64 MB video RAM with
DirectX 9 or later.
1 GB or more
Graphics
1024 x 768 pixels or more
Minimum 32,000 colors (16,770,000
colors recommended)
Monitor
Settings
*
See online help for information on using the software.
Install the camera manual.
● Click the “Camera Instruction Manual” button and
follow the on-screen instructions.
5
*
Other languages can be selected from the language combo
box. For information on using the software, see online help.
15
EN
Copy the camera manual.
3
2
●
Click the “Camera Instruction Manual” button to
open the folder containing the camera manuals.
Copy the manual for your language to the computer
Indicator lamp
On: Charging
Off: Charged
.
Charging the battery with the
included USB-AC adapter
The battery is not fully charged at shipment. Before
use, be sure to charge the battery until the indicator
lamp turns off (up to 3.5 hours).
The included F-2AC USB-AC adapter (hereafter
referred to as USB-AC adapter) differs depending
on the region where you purchased the camera. If
you received a plug-in type USB-AC adapter, plug it
directly into AC outlet.
If the indicator lamp does not light, the USB-AC
adapter is not connected to the camera correctly,
or the battery, camera, or USB-AC adapter may be
broken.
The included USB-AC adapter has been designed
to be used for charging and playback. Do not take
pictures while the AC adapter is connected to the
camera.
For details on the battery and the USB-AC adapter,
see “Battery and USB-AC adapter” (p. 65).
The battery can be charged while the camera is
connected to the computer. Charging time varies
depending on the performance of a computer. (There
may be cases in which it takes approx. 10 hours.)
1
When to charge the batteries
Charge the battery when the error message shown below
appears.
Multi-connector
Flashes in red
2
USB cable
Connector cover
(supplied)
Battery Empty
14M
4
Monitor top left
Error message
1
AC outlet
3
16
EN
Date, time, time zone, and language
As in Steps 2 and 3, use FGHI to set
[M] (month), [D] (day), [Time] (hours and
minutes), and [Y/M/D] (date order), and then
press the A button.
4
5
The date and time set here are saved to image file names,
date prints, and other data. You can also choose the
language for the menus and messages displa yed in the
monitor.
For precise time setting, press the A button as the
time signal strikes 00 seconds.
Press the n button to turn on the
camera.
● The date and time setting screen is displayed when
1
To change the date and time, adjust the setting from
the menu. [X] (Date/time) (p. 54)
the date and time are not set.
Use HI to select the [x] time zone and
then press the A button.
● Use FG to turn daylight saving time ([Summer])
on or off.
X
Y
M
--
D
Time
’11.02.26 00:00
Y/M/D
----
.
.
-- -- --
:
Seoul
Tokyo
MENU
Cancel
Date and time setting screen
OK
Set
Summer
Use FG to select the year for [Y].
2
3
X
The menus can be used to change the selected time
zone. [World Time] (p. 54)
Y
M
D
Time
Use FGHI to select your language and
6
Y/M/D
2011. --
.
-- -- --
:
press the A button.
The menus can be used to change the selected
language. [l] (p. 53)
MENU
Cancel
Inserting the card
Press I to save the setting for [Y].
X
Always use SD/SDHC/SDXC cards or Eye-Fi card
with this camera. Do not insert other types of memory
cards. “Using the card” (p. 66)
Y
M
D
Time
This camera can be used without a card by storing
images in its internal memory.
Y/M/D
2011.01. -- -- --
:
MENU
Cancel
17
EN
1
2
Write-protect
switch
Insert the card straight until it clicks into place.
Do not touch the contact area directly.
1
2
“Number of storable pictures (still images)/Continuous
recording length (movies) in the internal memory and
cards” (p. 68, 69)
To remove the card
1
2
Press the card in until it clicks and comes out slightly,
then remove the card.
18
EN
Shooting, Playbacck, and EErasing
Shooting with the optimum aperture
value and shutter speed (P mode)
Hold the camera and compose the shot.
2
In this mode, automatic shooting settings are activated
while also allowing changes to a wide range of
other shooting menu functions, such as exposure
compensation, white balance, etc. as needed.
Monitor
Press the n button to turn on the
camera.
1
Horizontal grip
P
mode indicator.
P
0.0
WB
AUTO
ISO
Vertical grip
AUTO
00:34
14M
4
Number of storable still pictures (p. 68)
Monitor (standby mode screen)
If P mode is not displayed, press H to display the
function menu screen and then set the shooting
mode to P. “Using the Menu” (p. 5)
Current shooting mode display
Program Auto
3D
P
0.0
WB
AUTO
ISO
AUTO
14M
MENU
4
19
EN
To turn off the camera
Press the n button again.
Press the shutter button halfway down to
focus on the subject.
3
● When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
Shooting movies
Press the R button to start recording.
1
● The camera was unable to focus if the AF target
mark flashes red. Try focusing again.
Continuous recording length
(p. 69)
AF target mark
P
Press halfway
00:34
REC
00:12
1/400 F3.5
Recording time
Shutter speed Aperture value
Lights up red when recording
“Focusing” (p. 62)
The effects of the set shooting mode can be used
when shooting movies. When the set shooting mode
To take the picture, gently press the shutter
button all the way down while being careful
not to shake the camera.
4
is p,
, s (Beauty) or P (Sparkle), shooting
W
is performed in P mode.
P
Press the R button again to stop recording.
2
Sound will also be recorded.
During sound recording, only the digital zoom can be
used (SZ-10). To record a movie with optical zoom,
set [R] (movies) (p. 43) to [Off].
Press fully
1/400 F3.5
Image review screen
To view images during shooting
Pressing the qbutton enables playback of images. To
return to shooting, either press the qbutton or press the
shutter button halfway down.
20
EN
[On] selected for [Digital Zoom]:
Using the zoom
Image size
Zoom bar
Turning the zoom lever adjusts the shooting range.
W side
T side
14M (SZ-10)
16M (SZ-20)
Digital zoom range
The magnification
ratio changes
Zoom bar
Other
depending on the
image size setting.*1
P
P
Digital zoom range
*1
0.0
0.0
If [Image Size] is less than the full resolution, after
reaching the maximum optical zoom, the camera will
automatically resize and crop the image to the selected
[Image Size], then enter the digital zoom range if [Digital
Zoom] is [On].
WB
WB
AUTO
AUTO
ISO
ISO
AUTO
AUTO
00:34
14M
4
00:34
14M
4
Optical zoom:18x (SZ-10)
12.5x (SZ-20)
Photographs taken with the zoom bar displayed in
red may appear “grainy.”
Digital zoom: 4x
To take larger imagess [Digital Zoom]
Changing the shooting information
display
The type and amount of zoom can be identified from
the appearance of the zoom bar. The display differs
depending on the options selected for [Digital Zoom]
(p. 41) and [Image Size] (p. 39).
The display of the screen information can be changed to
best match the situation, for example, the need for a clear
view of the screen or for making a precise composition by
using the grid display.
[Off] selected for [Digital Zoom]:
Image size
Zoom bar
14M (SZ-10)
16M (SZ-20)
Optical zoom range
Other
The magnification ratio changes
depending on the image size setting.*1
21
EN
Viewing images
Press F (INFO).
1
● The displayed shooting information changes in
the order shown below each time the button is
pressed. “Shooting mode display” (p. 11)
Press the q button.
1
Number of frames/
Total number of images
Normal
No information
P
P
4/30
0.0
WB
AUTO
ISO
AUTO
00:34
14M
4
MENU
’11/02/26 00:00
Movie information (SZ-20 only)
Detailed
Playback image
P
P
Turn the wheel controller to select an image.
● It can be performed by pressing HI.
2
0.0
WB
0.0
AUTO
WB
ISO
AUTO
AUTO
ISO
AUTO
00:34
14M
00:34
14M
4
MENU
4
NORM
Displays
Displays next
previous
image
image
Readinng a histogram
If the peak fills too much of the frame, the
image will appear mostly white.
Keep turning the wheel controller to fast forward or
reverse. It can be performed by holding HI.
If the peak fills too much
of the frame, the image
will appear mostly black.
The display size of the images can be changed.
“Index view and close-up view” (p. 24)
The green section shows
luminance distribution within
the screen’s center.
22
EN
To play sound recordings
To play back movies
To play sound recorded with an image, select the image
and press the A button.
Select a movie, and press the A button.
4/30
! appears
OK
Movie Play
’11/02/26 00:00
During playback
Movie
During audio playback
Press the A button to pause
playback. During pause, fast
forward or reverse, press the A
button to restart playback.
Pausing and
restarting
playback
Press FG to adjust volume.
To view sequential images (SZ-20 only)
Pictures taken using sequential mode (p. 37) are
displayed as a group.
Press I to fast forward. Press I again
to increase the fast forward speed.
Fast forward
Rewind
● Turn the zoom lever to the T side. Use FGHI
to select the image in index view, and then press
the A button to display the image. Press HI to
view the previous/next frame.
Press H to rewind. The speed
at which the recording rewinds
increases each time H is pressed.
Adjusting the
volume
Turn the wheel controller or use
FG to adjust the volume.
Operations while playback is paused
Expand
OK
T
Play
Sequentially shot frame
● Select the sequentially shot frame and press
the A button to playback the series of images
continuously. Press the A button to stop the
continuous playback, and then use HI to view
the images frame by frame.
Elapsed time
/Total recording time
00:14/00:34
During pause
23
EN
Index view and close-up view
Use F to display the first frame
and press G to display the last
frame.
Cueing
Index view enables quick selection of a desired image.
Close-up view (up to 10x magnification) allows checking
of image details.
Turn the wheel controller to advance
or rewind by one frame at a time.
Keep turning the wheel controller for
continuous advance or rewind.
Advancing and
rewinding one
frame at a time*1
Turn the zoom lever.
1
Resuming
playback
Press the A button to resume playback.
To operate with HI
Single-image view
Close-up view
*1
Press I or H to advance or rewind one frame
at a time. Hold I or H pressed for continuous
advance or rewind.
4/30
4/30
W
T
To stop movie playback
Press the m button.
’11/02/26 00:00
’11/02/26 00:00
Erasing images during playback
(Single image erase)
W
T
Index view
Display the image you want to erase and
1
press G ( ).
D
’11/02/26
Erase
2
4
Photo Surfing
(p. 44)
Erase
Cancel
W
T
ALL
MENU
OK
Set
Cancel
’11/02/26
W
2011/
02/26
2
4
Press FG to select [Erase], and press the
A button.
2
35ºN
139ºE
Multiple images or all images can be erased at a time
(p. 46).
24
EN
To select an image in index view
Use FGHI to select an image, and press the A
button to display the selected image in single-image view.
Playing back panorama images
Panorama images that were combined together using
[Auto] or [Manual] can be scrolled for viewing.
To scroll an image in close-up view
Use FGHI to move the viewing area.
“Creating panoramic images (p mode)” (p. 30)
Select a panorama image during playback.
1
To stop [Photo Surfing]
“Viewing images” (p. 22)
Use FG to select [ALL], then press the A button.
4/30
Changing the image information
display
Shooting information settings displayed on the screen can
be changed.
Press F (INFO).
1
OK
Replay
’11/02/26 00:00
● The displayed image information changes in
the order shown below each time the button is
pressed.
Press the A button.
2
Normal
3D
10
4/30
No information
’11/02/26 00:00
Detailed
Current viewing area
10
4/30
To control panorama image playback
Zoom in/Zoom out: Press the A button to pause
playback. Then turn the zoom lever to enlarge/shrink the
image.
1/1000 F3.0
2.0
ISO WB
P
AUTO AUTO
14M
NORM
FILE
100 0004
’11/02/26 00:00
“Reading a histogram” (p. 22)
25
EN
Playback direction: Press FGHI to pause playback
and scroll the image in the direction of the pressed button.
To start a slideshow, press the m button.
To stop the slideshow, press the m or A button.
Pause: Press the A button.
Restart scrolling: Press the A button.
Stop playback: Press the m button.
3D images are composed of JPEG files and MPO
files. If any files are deleted on a computer, playback
of 3D images may not be possible.
Playing back W images
Using the menu guide
3D images shot with this camera can be played back on
3D-compatible devices connected to this camera using an
HDMI cable (sold separately).
Pressing the E button in the setup menu displays a
description of the current item.
“Using the Menu” (p. 5)
“Shooting 3D images (3D mode)” (p. 32)
When playing back 3D images, read the warnings in
the instruction manual for the 3D-compatible devices
carefully.
Using the camera guide
Use the camera guide to look up camera operations.
Connect the 3D-compatible device and
camera using the HDMI cable.
1
Press the E button in the standby mode
screen or the playback screen.
1
For the connection and setting method, see
“Connection via HDMI cable” (p. 52)
Search by
purpose
Search for a
solution
Use the wheel controller or HI to select [3D
show] and then press the A button.
2
Search by
situation
Learn about the
camera
Use the wheel controller or HI to select the
3D image to play back and then press the A
button.
3
Search by
keyword
History
OK
Set
Exit
MENU
OK
Set
Slideshow
26
EN
Submenu 2
Search by
purpose
Application
Functions or operating methods can
be searched.
Search for a
solution
A solution can be searched when
having problems during operation.
Search by
situation
Search from shooting/playback
scene.
Search from
keyword
Search from the camera keyword.
Information is shown about
recommended functions and basic
operating methods for the camera.
Learn about the
camera
Searches can be performed from the
search history.
History
Use FGHI to select the desired item.
● Follow the on-screen instructions to search the
desired contents.
2
27
EN
Using Shootiing Modes
To change the shooting mode
Using the best mode for the shooting
s
P
,
M
p
, W)
P
s
The shooting mode (
,
,
,
scene (
mode)
can be changed with using the function menu.
“Using the Menu” (p. 5)
s
Set the shooting mode to
.
1
The default settings of the function are highlighted in
.
Scene Mode
Shooting with automatic settings
(M mode)
0.0
The camera will automatically select the optimal shooting
mode for the scene. The shooting condition is decided by
the camera and settings cannot be changed, excepting
some functions.
WB
AUTO
14M
MENU
4
Set the shooting mode to M.
Press G to go to the submenu.
1
2
3
The icon changes depending on the scene
that the camera automatically selects
Portrait
0.0
WB
AUTO
14M
MENU
4
Use HI to select the mode and then press
the A button to set.
00:34
14M
4
NORM
In some cases, the camera may not select the
desired shooting mode.
When the camera cannot identify the optimal mode,
P mode will be selected.
0.0
WB
AUTO
00:34
14M
4
Icon indicating the scene mode
that is set
28
EN
s
In
modes, the optimum shooting settings are
Shooting with special effects
pre-programmed for specific shooting scenes. For
this reason, settings may not be changed in some
modes.
P
(
mode)
To add expression to your photo, select the desired
special effect.
Option
Application
P
Set the shooting mode to
.
BPortrait/VBeauty/FLandscape/
1
*1
'
Hand-Held Starlight
/
GNight Scene*3
/
Night+Portrait/
M
The camera takes
a picture using the
optimum settings
for the scene
Magic Filter
CSport/NIndoor/WCandle*2
/
*3
R
S
Self Portrait/ Sunset
/
XFireworks*3
/
Cuisine/
V
conditions.
dDocuments/qBeach & Snow/
UPet Mode - Cat/
tPet Mode - Dog
0.0
WB
AUTO
14M
MENU
*1
4
SZ-20 only
SZ-10 only
*2
*3
When the subject is dark, noise reduction is
automatically activated. This approximately doubles the
shooting time during which no other pictures can be
taken.
Press G to go to the submenu.
2
3
Pop Art
Using V (Beauty)
1 Point the camera toward the subject. Check the frame
appearing around the face detected by the camera,
and then press the shutter button to take the picture.
0.0
WB
AUTO
● The unedited image and edited image are both
saved.
MENU
● If the image cannot be retouched, only the unedited
image is saved.
Use HI to select the desired effect and then
press the A button to set.
● The [Image Size] of the retouched image is limited
to [n] or lower.
0.0
WB
AUTO
00:34
14M
4
P
Icon indicating
that is set
mode
29
EN
Shooting mode
Option
Submenu 1
Application
Three frames are taken and
combined by the camera.
The user only composes the
shots so that the target marks
and pointers overlap, and the
camera automatically releases
the shutter.
1Pop Art
2Pin Hole
3Fish Eye
4Drawing*1
5Soft Focus
6Punk
XSparkle
YWatercolor
SZ-10
SZ-20
MAGIC FILTER
Auto
Panorama images are
automatically combined just
by swinging the camera in the
shooting direction. Press the
shutter button once to begin
the sequence.
*1
Two images are saved, an unmodified image and an
image to which the effect has been applied.
P
In
mode, the optimum shooting settings are pre-
programmed for each scene effect. For this reason,
some settings cannot be changed in some modes.
Three frames are taken and combined
by the camera. The user composes
the shots using the guide frame and
manually releases the shutter.
The selected effect is applied to the movie. The effect
may not be applied depending on the shooting mode.
Manual
PC
The frames that were taken are
combined into a panorama image using
the PC software.
Creating panoramic images (p mode)
Set the shooting mode to p.
1
For details on installing the PC software, see
“Charging the battery and setting up using the
supplied CD” (p. 13).
Panorama
3D
AUTO
When set to [Auto] or [Manual], [Image Size]
(p. 39) is fixed to 2MB or equivalent.
0.0
WB
The focus, exposure, zoom position (p. 21), and white
AUTO
balance (p. 36) are locked at the first frame.
The flash (p. 34) is fixed to $(Flash Off) mode.
14M
MENU
4
To shoot with [Auto] (SZ-20)
1 Point the camera to the start position.
Press G to go to the submenu.
2
3
● Use FGHI to select the shooting direction.
Use HI to select the desired mode. When
selecting [Auto], press G. When selecting
other than [Auto], press the A button.
2 Press the shutter button to begin shooting. Move
the camera slowly in the arrow-marked direction that
shown on the monitor.
When shooting with [Auto] (SZ-20)
Use HI to select the angle of view and then
press the A button.
4
30
EN
3 Move the camera slowly while keeping it straight, and
stop the camera where the pointer and target mark
overlap.
AUTO
FULL
● The camera releases the shutter automatically.
AUTO
OK
Save
Cancel MENU
Guide
3 When shooting reaches the end of the guide on the
monitor, it finishes automatically.
MENU
OK
Save
Cancel
● The camera automatically processes the images
and the combined panorama image is displayed.
To combine only two pictures, press the A button
before taking a third frame.
● To stop shooting in the middle, press the shutter
button or A button. If the camera pauses for a
while, shooting automatically finishes.
4 Repeat Step 3to take a third frame.
● After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
If the message “Image was not created.” is displayed,
shoot again.
To exit the panorama function without saving an
image, press the m button.
If the shutter does not automatically release, try
[Manual] or [PC].
When shooting with [Auto] (SZ-10)
1 Press the shutter button to take the first frame.
4
2 Move the camera slightly in the direction of the second
frame.
Taking pictures with [Manual]
1 Use FGHI to specify at which edge the next
picture is to be connected.
AUTO
Target mark
MANUAL
Direction for
combining the next
frame
Pointer
MENU
OK
Save
Cancel
Screen when combining images
from left to right
OK
Set
2 Press the shutter button to take the first frame. The
white-boxed part of the first frame is displayed on joint
area 1.
31
EN
Shooting 3D images (W mode)
MANUAL
MANUAL
In this mode, 3D images are shot for viewing on
3D-compatible display devices.
1
2
Images shot in 3D mode cannot be displayed in 3D
on this camera’s monitor.
MENU
OK
Save
Cancel
1st frame
Set the shooting mode to W.
1
3 Compose the next shot so that joint area 1 overlaps
joint area 2.
3D Photo
3D
P
4 Press the shutter button to take the next shot.
AUTO
Press the A button to combine just 2 frames.
5 Repeat steps 3and 4to take a third frame.
● After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
14M
MENU
4
To exit the panorama function without saving an
image, press the m button.
Press G to go to the submenu.
2
3
Taking pictures with [PC]
1 Use FGHI to select the direction that the frames
are combined.
Use HI to select [Auto] or [Manual] and
then press the A button to set.
2 Press the shutter button to take the first frame, and
then point the camera for the second frame. The
shooting procedure is same as that of [Manual].
Submenu 1
Description
The camera automatically shoots the
second frame to create a 3D image.
Auto
Panorama shooting is possible for up to 10 frames.
3 Repeat Step 2until the number of desired frames is
taken, and then press the A button or m button
when finished.
You shoot the second frame to create
a 3D image by following the guide on
the monitor.
Manual
Refer to the PC software help guide for details on
how to make panorama images.
Depending on the subject or the situation (if the
distance between the camera and subject is too
short), the image may not look 3D.
The 3D viewing angle varies depending on the
subject, etc.
32
EN
Taking pictures with [Auto]
1 Press the shutter button to shoot the first frame.
2 Move the camera horizontally. The image is
automatically taken when the subject overlaps the
translucent image that is displayed on the monitor.
Taking pictures with [Manual]
1 Press the shutter button to shoot the first frame.
2 Move the camera in the same way as [Auto] to decide
the position, and then press the shutter button.
The first shot image is displayed on the monitor
lightly. Decide the position by referencing the image.
To exit 3D shooting mode without saving an image,
press the m button.
The [Image Size] (p. 39) is fixed to [0].
The zoom ratio is fixed.
The focus, exposure and the white balance are fixed
when the first image is taken.
The flash is fixed to [$Flash Off].
33
EN
Using Shoootingg Functtions
“Using the Menu” (p. 5)
Use HI to select the setting option, and
press the A button to set.
3
Using the flash
Option
Description
The flash functions can be selected to best match the
shooting conditions.
The flash fires automatically in low-
light or backlight conditions.
Flash Auto
Redeye
Slide the flash switch to raise the flash.
1
Pre-flashes are emitted to reduce
the occurrence of red eye in your
photos.
The flash fires regardless of the
available light.
Fill In
Flash Off
The flash does not fire.
Shooting closeups (Macro shooting)
This function enables the camera to focus and shoot
subjects at close distances.
To turn off the flash
Select the macro option in the function menu.
1
Press the flash down back into the camera.
Select the flash option in the function menu.
2
P
Off
P
Flash Auto
0.0
WB
AUTO
ISO
AUTO
0.0
WB
AUTO
14M
MENU
4
ISO
AUTO
14M
MENU
4
34
EN
Option
YOff
Description
Use HI to select the setting option, and
press the A button to set.
2
The self-timer is deactivated.
The self-timer lamp turns on for
approx. 10 seconds, then blinks for
approx. 2 seconds, and then the
picture is taken.
Option
Description
Y12 sec
Off
Macro mode is deactivated.
You can shoot the image at a closer
range.
The self-timer lamp blinks for approx.
2 seconds, then the picture is taken.
Macro
Y2 sec
SZ-10: 10 cm (4 in.)*1 160 cm (63 in.)*2
SZ-20: 10 cm (4 in.)*1 90 cm (35.4 in.)*2
When your pet (cat or dog) turns its
head towards the camera, its face is
recognized and the picture is taken
automatically.
This enables shooting as close as
1 cm/0.4 in. to the subject.
Super Macro*3
;
Auto Release*1
*1
When the zoom is at the widest (W) position.
When the zoom is at the most telephoto (T) position.
The zoom is automatically fixed.
*2
*3
*1
[Auto Release] is displayed only when the s
mode is [U] or [t].
The flash (p. 34) and zoom (p. 21) cannot be set
when [a Super Macro] (p. 35) is selected.
Self-timer shooting is automatically canceled after
one shot.
To cancel the self-timer after it starts
Press the m button.
Using the self-timer
After the shutter button is pressed all the way down, the
picture is taken after a short delay.
Adjusting the brightness
(Exposure compensation)
Select the self-timer option in the function
menu.
1
The standard brightness (appropriate exposure) set by the
camera based on the shooting mode (except for M)
can be adjusted brighter or darker to obtain a desired shot.
P
Select the exposure compensation option in
the function menu.
1
Y Off
2
12
0.0
WB
AUTO
ISO
AUTO
Exposure Comp.
P
0.0
14M
MENU
4
0.3 0.0 0.3
WB
AUTO
ISO
Use HI to select the setting option, and
press the A button to set.
2
AUTO
MENU
35
EN
Selecting the ISO sensitivity
Use HI to select the desired brightness,
and press the A button.
2
Select the ISO setting option in the function
1
menu.
Adjusting to a natural color scheme
(White balance)
P
For more natural coloring, choose a white balance option
suited to the scene.
0.0
Select the white balance option in the
function menu.
1
WB
AUTO
ISO
1100
ISO
200
ISO
ISO 200
400
MENU
1/400 F3.0
WB
WB Auto
P
Use HI to select the setting option, and
press the A button to set.
2
0.0
WB
AUTO
ISO
AUTO
Option
Description
MENU
The camera automatically adjusts
the sensitivity according to the
shooting scene.
ISO Auto
Use HI to select the setting option, and
press the A button to set.
2
The camera uses a higher sensitivity
compared to [ISO Auto] to minimize
blur caused by a moving subject or
by camera shake.
High ISO Auto
Value
Option
Description
The camera automatically adjusts
the white balance according to the
shooting scene.
The ISO sensitivity is fixed to the
selected value.
WB Auto
For shooting outdoors under a
clear sky.
ISO stands for International Organization for
Standardization. ISO standards specify the sensitivity
for digital cameras and film, thus codes such as “ISO
100” are used to represent sensitivity.
5
For shooting outdoors under a
cloudy sky.
3
1
In the ISO setting, although smaller values result in
less sensitivity, sharp images can be taken under fully
lit conditions. Larger values result in higher sensitivity,
and images can be taken at fast shutter speeds even
under low light conditions. However, high sensitivity
introduces noise into the resulting picture, which may
give it a grainy appearance.
For shooting under tungsten lighting.
For shooting under white fluorescent
lighting.
>
36
EN
SZ-20
Sequential shooting (Drive)
Option
Description
Pictures are taken sequentially while the shutter button
is held down.
One frame is shot each time the
shutter button is pressed.
o
Select the drive option in the function menu.
1
The camera takes sequential shots at
approximately 1.6 frames/sec.
)
P
The camera takes sequential shots
at approximately 7 frames/sec for up
to 3 frames.
*
,
+
The camera takes sequential shots at
approximately 15 frames/sec for up
to 34 frames.
0.0
WB
AUTO
ISO
AUTO
Sequential
The camera takes up to 16 photos
at regular intervals while holding the
shutter button.
MENU
*1
The shooting speed varies depending on the settings
for [Image Size/Compression] (p. 39).
SZ-10
With settings other than [o], the focus, exposure
and the white balance are fixed when the first frame
is shot.
Option
Description
One frame is shot each time the
shutter button is pressed.
o
The [Image Size] is limited.
[,] [c] [+]: [n] or lower
[d]: [3] or lower
The images are taken sequentially
while holding down the shutter
button.
j*1
The ISO sensitivity is fixed to [ISO Auto].
The camera takes sequential shots
at a faster speed than in [j].
When set to [j], the flash (p.34) cannot be set to
[Redeye]. When set to other than [o] or [j], the
flash is fixed to [$Flash Off].
c
d
The camera takes sequential shots
at approximately 10 frames/sec.
When set to [,], [c], [d] or [+], the digital
zoom (p. 21) is not available.
37
EN
For information on using the menus, see “Setup menu” (p. 6).
Menus forr Shootiing Funncctions
The default settings of the function are highlighted in
.
Restoringg the shooting functions to the default ssettinggss [[RReeset]
I (Shooting menu 1) X Reset
Submenu 2
Application
Restores the following menu functions to the default settings.
• Shooting mode (p. 28)
• Flash (p. 34)
• Macro (p. 34)
• Self-timer (p. 35)
• Exposure compensation (p. 35)
• White balance (p. 36)
Yes
• ISO (p. 36)
• Drive (p. 37)
• Menu functions in [I, J, A] (p. 38 to 43)
No
The current settings will not be changed.
38
EN
For information on using the menus, see “Setup menu” (p. 6).
Selecting the image quality for still images [Image Size/Compression]
I (Shooting menu 1) X Image Size/Compression
Submenu 1
Submenu 2
Application
16M (4608x3456) *1
14M (4288x3216) *2
Suitable for printing pictures over A3 (11x17 in.).
8M (3264x2448)
5M (2560x1920)
3M (2048x1536)
2M (1600x1200)
1M (1280x960)
Suitable for printing pictures up to A3 (11x17 in.).
Suitable for printing pictures at A4 (8.5x11 in.).
Suitable for printing pictures up to A4 size (8.5x11 in.).
Suitable for printing pictures at A5 (5x7 in.).
Suitable for printing pictures at postcard size.
Image Size
Suitable for viewing pictures on a TV or using pictures on emails and web
sites.
VGA (640x480)
16:9G (4608x2592)*1
Suitable for playing pictures on a widescreen TV and for printing on A3 or
11"x17".
(4288x2416)*2
Suitable for playing pictures on a widescreen TV and for printing on A5 or 5"
Shooting at high quality.
x7".
16:9F (1920x1080)
Fine
Compression
Normal
Shooting at normal quality.
*1
*2
SZ-20
SZ-10
“Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and cards” (p. 68, 69)
Selecting the image quality for movies [Image Size/Image Quality]
A (Movie menu) X Image Size/Image Quality
Submenu 1
Submenu 2
Application
1080P (SZ-20)
720P
VGA (640x480)
QVGA (320x240)
Image Size
Select the image quality based on the image size and frame rate.
Select [Fine] to shoot with higher image quality.
Image Quality
Fine/Normal
“Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and cards” (p. 68, 69)
When [Image Size] is set to [QVGA], [Image Quality] is fixed to [Fine].
39
EN
For information on using the menus, see “Setup menu” (p. 6).
To focus on a moving subject
continuously (AF Tracking)
1 Hold the camera to align the AF target mark on the
subject and press the A button.
Brightening the subject against
backlight [Shadow Adjust]
I (Shooting menu 1) X Shadow Adjust
2 When the camera recognizes the subject, the AF
target mark automatically tracks the subject movement
to focus on it continuously.
Submenu 2
Auto
Application
Automatically On when a compatible
shooting mode is selected.
3 To cancel the tracking, press the A button.
Depending on the subjects or the shooting conditions,
the camera may be unable to lock the focus or fail to
track the subject movement.
Off
On
The effect is not applied.
Shoot with automatic adjustment to
brighten an area that has become
darker.
When the camera fails to track the subject movement,
the AF target mark changes to red.
When set to [Auto] or [On], [ESP/n] (p. 40) is
automatically fixed to [ESP].
Selectting the method for measuring the
brightness [ESP/n]
Selectting the focusing area [AF Mode]
I (Shooting menu 1) X ESP/n
I (Shootin g menu 1) X AF Mode
Submenu 2
Application
Submenu 2
Application
Shoots to obtain a balanced
brightness over the entire screen
(Meters the brightness at the center
and surrounding areas of the screen
separately).
The camera focuses automatically.
(If a face is detected, it is shown by
a white frame*1; when the shutter
button is pressed halfway and the
camera focuses, the frame turns to
green*2. If no face is detected, the
camera chooses a subject in the
frame and focuses automatically.)
ESP
Face/iESP*1
Shoots the subject at the center
during backlighting (Meters the
brightness at the center of the
screen).
5 (spot)
The camera focuses on the subject
located within the AF target mark.
Spot
When set to [ESP], the center may appear dark when
shooting against strong backlighting.
The camera tracks the subject
movement automatically to focus on
it continuously.
AF Tracking
*1
*2
For some subjects, the frame may not appear or may
take some time to appear.
If the frame blinks in red, the camera cannot focus. Try
refocusing on the subject.
40
EN
For information on using the menus, see “Setup menu” (p. 6).
Shooting at higher magnifications than
optical zoom [Digital Zoom]
There may be a noise coming from inside the camera
when the shutter button is pressed with [Image
Stabilizer] (still images) set to [On].
I (Shooting menu 1) X Digital Zoom
Images may not be stabilized if camera shake is too
severe.
Submenu 2
Application
Disable digital zoom.
Enable digital zoom.
When the shutter speed is extremely slow, such as
when taking pictures at night, [Image Stabilizer] (still
images) may not be as effective.
Off
On
Using the assist lamp for shooting a
dark subjectt [AF Illuminat.]
[Digital Zoom] is not available when [a Super
Macro] (p. 35) is selected.
The option selected for [Digital Zoom] affects the
appearance of the zoom bar.
J (Shooting menu 2) X AF Illuminat.
“To take larger images” (p. 21)
Submenu 2
Application
Off
On
The AF illuminator is not used.
Reducing the blur caused by the
cameraa shake wwhen shhoooting
[Image Stabilizer] (still images)/
[IS Movie Mode] (movies)
When the shutter button is pressed
halfway down, the AF illuminator
turns on to aid focusing.
J (Shooting menu 2) X
Image Stabilizer (still images)/
A (Movie menu) X
SZ-10
SZ-20
IS Movie Mode (movies)
Submenu 2
Application
The image stabilizer is deactivated.
This is recommended for shooting
when the camera is fixed in place on
a tripod or other stable surface.
AF illuminator
Off
On
The image stabilizer is activated.
Default setting
SZ-10: [Image Stabilizer] [On], [IS Movie Mode] [Off]
SZ-20: [Image Stabilizer] [On], [IS Movie Mode] [On]
41
EN
For information on using the menus, see “Setup menu” (p. 6).
Viewing the image immediately after
Displaying icon guides [Icon Guide]
shooting [Rec View]
J (Shooting menu 2) X Icon Guide
J (Shooting menu 2) X Rec View
Submenu 2
Application
Submenu 2
Application
Off
On
No icon guide is displayed.
The image being recorded is not
displayed. This allows the user
to prepare for the next shot while
following the subject in the monitor
after shooting.
The explanation of the selected icon
will be displayed when a shooting
mode or function menu icon is
selected (position the cursor on
the icon for a while to display the
explanation).
Off
On
The image being recorded is
displayed. This allows the user to
make a brief check of the image that
was just taken.
Program Auto
3D
P
Functions can be changed
Icon guide
manually.
0.0
Automaticcally rootating images shot with
the camera iin a vertiical posiition during
playbacck [Piicc Orientation]
WB
AUTO
ISO
AUTO
14M
MENU
4
J (Shooting menu 2) X Pic Orientation
Imprinting the date of recording
[Date SStamp]
During shooting, the [y] (p. 47) setting on the
playback menu is set automatically.
This function may not work properly if the camera is
facing up or down during shooting.
J (Shooting menu 2) X Date Stamp
Submenu 2
Application
Submenu 2
Application
Off
On
Do not imprint the date.
Information about the vertical/
horizontal orientation of the camera
during shooting is not recorded with
images. Images shot with the camera
in a vertical position are not rotated
during playback.
Stamp new photographs with the
date of recording.
Off
On
When the date and time are not set, [Date Stamp]
cannot be set.
“Date, time, time zone, and language” (p. 17)
Information about the vertical/
horizontal orientation of the camera
during shooting is recorded with
images. Images are automatically
rotated during playback.
The date stamp can not be deleted.
[Date Stamp] is not available in [Panorama] or [3D]
mode.
42
EN
For information on using the menus, see “Setup menu” (p. 6).
Recordingg sound when shooting
movies [R]
A (Movie menu) X R
Submenu 2
Application
No sound is recorded.
Sound is recorded.
Off
On
When set to [On], only the digital zoom can be used
during movie recording. To record the movie with the
optical zoom, set [R] (movie sound recording) to [Off]
(SZ-10).
43
EN
For information on using the menus, see “Setup menu” (p. 6).
Menus forr Playbback, EEditingg, and PPrintinng Funcctions
The default settings of the function are highlighted in
.
Searchhing for images and playing back
the relatted imagges [Phhoto Surfing]
Data must be created with the [ib] (PC software)
before using some functions.
q(Playback menu) X Photo Surfing
In [Photo Surfing], images can be searched and related
images can be played back by selecting the related items.
Refer to the [ib] (PC software) help guide for details
on how to use the [ib] (PC software).
For details on installing the [ib] (PC software), see
“Setting up using the supplied CD” (p. 13).
To start [Photo Surfing]
Press the A button to start [Photo Surfing].
When a related item of the image displayed is selected
with FG, images related to the item are displayed in the
lower part of the monitor. Use HI to display an image.
To select related items that are not displayed, press the
A button when selecting an item.
Playing back pictures automatically
[Slideshow]
q(Playback menu) X Slideshow
To stop [Photo Surfing]
Submenu 2
Slide
Submenu 3
Application
To stop [Photo Surfing], use FG to select [ALL], then
Selects the content
to be included in the
slideshow.
All/Event/
Collection*1
press the A button.
ALL
ALL
2011/
02/26
Off/Cosmic/
Breeze/
Mellow/
Dreamy/
Urban
Selects the background
music options.
BGM
Related items
35ºN
139ºE
Selects the type of
transition effect used
between slides.
Standard/
Fade/Zoom
Type
Start
―
Starts the slideshow.
Images corresponding the
related items
*1
The [Collection] that has been created with the [ib] (PC
software) and imported back from a computer can play
back.
During a slideshow, press I to advance one frame,
H to go back one frame.
44
EN
For information on using the menus, see “Setup menu” (p. 6).
Using the [ib] (PC software) and
importing data back to the camera
Cropping image [P]
q(Playback menu) X Edit X P
Refer to the [ib] (PC software) help guide for details
on how to use the [ib] (PC software).
1 Use HI to select an image, and press the A button.
2 Use the zoom lever to select the size of the cropping
frame, and use FGHI to move the frame.
The [ib] (PC software) may not work properly on the
pictures edited by other application software.
The following [Photo Surfing] functions can be
performed when data created with the [ib] (PC
software) is imported back to the camera.
Cropping frame
Information of persons or shooting locations and new
Collections can be added in the related items.
Changing the image size [Q]
OK
Set
q(Playback menu) X Edit X Q
3 Press the A button after you have selected the area
to trim.
● The edited image is saved as a separate image.
Submenu 3
Application
This saves a high-resolution image
as a separate image with a smaller
size for use in e-mail attachments
and other applications.
C640 x 480
Adding sound to still images [R]
E320 x 240
q(Playback menu) X Edit X R
1 Use HI to select an image.
1 Use HI to select an image.
2 Aim the microphone toward the sound source.
2 Use FG to select an image size and press the A
button.
Microphone
● The resized image is saved as a separate image.
3 Press the A button.
● Recording starts.
● The camera adds (records) sound for approx.
4 seconds while playing back the image.
45
EN
For information on using the menus, see “Setup menu” (p. 6).
Retouching the skin and eyes
[Beautty Fix]
Brightening areas that are dark
due to backlight or other reasons
[Shadow Adj]
q(Playback menu) X Edit X Beauty Fix
q(Playback menu) X Edit X Shadow Adj
Depending on the picture, the editing may not be
effective.
1 Use HI to select an image, and press the A button.
● The edited image is saved as a separate image.
Submenu 3
All
Submenu 4
Application
Depending on the picture, the editing may not be
effective.
[Clear Skin], [Sparkle
Eye] and [Dramatic Eye]
are applied together.
―
The retouching process may lower the image
resolution.
Makes skin look smooth
and translucent. Select
the correction effect
from 3 levels.
Clear Skin
Soft/Avg/Hard
Retouuching red eyes in flashh shooting
[Redeyye Fix]
Enhances the contrast
of the eyes.
Sparkle Eye
―
―
q(Playback menu) X Edit X Redeye Fix
Enlarges the subject’s
eyes.
1 Use HI to select an image, and press the A button.
Dramatic Eye
● The edited image is saved as a separate image.
1 Use FG to select a correction item, and press the A
button.
Depending on the picture, the editing may not be
effective.
2 Use HI to select an image for retouching, and press
the A button.
The retouching process may lower the image
resolution.
● The retouched image is saved as a separate
image.
Erasing images [Erase]
When [Clear Skiin] is selected
Use FG to select the retouching level, and press the
q(Playback menu) X Erase
A button.
Submenu 2
All Erase
Application
Clear Skin
All images in the internal memory or
card will be erased.
Images are individually selected and
erased.
Soft
Avg
Sel. Image
Erase
Hard
Deletes the image displayed.
MENU
OK
Set
Back
46
EN
For information on using the menus, see “Setup menu” (p. 6).
When erasing pictures in the internal memory, do not
insert the card into the camera.
Saving print settings to the image data
[Print Order]
Protected images cannot be erased.
q(Playback menu) X Print Order
With SZ-20, the grouped sequential images can be
erased collectively. (p. 23)
“Print reservations (DPOF)” (p. 58)
Print reservation can be set only for still images that
are recorded to the card.
To individually select and erase images
[Sel. Image]
1 Use FG to select [Sel. Image], and press the
A button.
Protectiing images [R]
2 Use HI to select the image to be erased, and press
the A button to add a R mark to the image.
q(Playback menu) X R
Protected images cannot be erased by [Erase] (p. 24,
46), [Sel. Image] (p. 47), or [All Erase] (p. 47), but
all images are erased by [Memory Format]/[Format]
(p. 48).
● Turn the zoom lever to the W end to display an
index view. Images can be quickly selected using
the FGHI buttons. Turn to the T end to return
to the single frame display.
1 Use HI to select an image.
2 Press the A button.
4/30
Sel. Image
● Press the A button again to cancel the settings.
3 If necessary, repeat Steps 1and 2to protect other
images, and press the m button.
R mark
Rotating images [y]
OK
MENU
Erase/Cancel
q(Playback menu) X y
3 Repeat Step 2to select the images to be erased,
and then press the m button to erase the selected
1 Use HI to select an image.
images.
2 Press the A button to rotate the image.
3 If necessary, repeat Steps 1and 2to make settings
for other images, and press the m button.
4 Use FG to select [Yes], and press the A button.
● The images with a R mark are erased.
The new picture orientations will be saved even after
the power is turned off.
To erase all images [All Erase]
1 Use FG to select [All Erase], and press the
A button.
2 Use FG to select [Yes], and press the A button.
47
EN
For information on using the menus, see “Setup menu” (p. 6).
Menus for OOther Caamera Seettings
The default settings of the function are highlighted in
.
Erasing data completely
[Memoryy Formaatt]/[Foormat]
Copying images in the internal memory
to the card [Backup]
r (Settings 1) X Memory Format/Format
r (Settings 1) X Backup
Before formatting, check that no important data is left
in the internal memory or card.
Submenu 2
Application
Backs up image data in the internal
memory to the card.
Cards must be formatted with this camera before
first use or after being used with other cameras or
computers.
Yes
No
Cancels the backup.
Be sure to remove the card before formatting the
internal memory.
Using an Eye-Fi card [Eye-Fi]
Submenu 2
Yes
No
Application
r (Settings 1) X Eye-Fi
Completely erases the image data
in the internal memory or card
(including protected images).
Submenu 2
Application
Off
On
Disable Eye-Fi communication.
Enable Eye-Fi communication.
Cancels formatting.
When using an Eye-Fi card, read the Eye-Fi card
instruction manual carefully, and comply with the
instructions.
Use the Eye-Fi card in compliance with the laws and
regulations of the country where the camera is used.
In locations such as on an airplane, where the Eye-Fi
communication is prohibited, remove the Eye-Fi card
from the camera, or set [Eye-fi] to [Off].
This camera does not support the Eye-Fi card’s
Endless mode.
48
EN
For information on using the menus, see “Setup menu” (p. 6).
Selectting a method for connecting
the camerra to otther deevices
[USB Connnection]
Turning on the camera with the q
button [qPower On]
r (Settings 1) X qPower On
r (Settings 1) X USB Connection
Submenu 2
Application
Submenu 2
Auto
Application
The camera is not turned on. To turn
on the camera, press the n
button.
No
When the camera is connected to
another device, the settings selection
screen is displayed.
Press and hold the qbutton to turn
the camera on in the playback mode.
Yes
Select when connecting the camera
to a computer via a storage device.
Storage
MTP
Select when transferring images
without using the supplied [ib] (PC
software) on Windows Vista/
Windows 7.
Saving the mode when the camera is
z
turned off [Keep Settings]
z
r (Settings 1) X Keep Settings
Select when connecting to a
PictBridge-compatible printer.
Print
Submenu 2
Application
The shooting mode is saved when
the camera is turned off and is
reactivated the next time the camera
is turned on.
Systemm requuirements
Windows
:
Windows XP Home Edition/
Professional (SP1 or later)/
Vista/Windows 7
Yes
The shooting mode is set to P mode
when the camera is turned on.
Macintosh
:
Mac OS X v10.3 or later
No
When using another system other than Windows XP
(SP2 or later)/Windows Vista/Windows 7, set to
[Storage].
Choosing the opening screen display
[Pw On Setup]
Even if a computer has USB ports, proper operation
is not guaranteed in the following cases:
● Computers with USB ports installed using an
expansion card, etc.
r (Settings 1) X Pw On Setup
● Computers without a factory-installed OS and
home-built computers
Submenu 2
Application
Off
On
No opening screen is displayed.
The opening screen is displayed
when the camera is turned on.
49
EN
For information on using the menus, see “Setup menu” (p. 6).
Selecting the camera souund and its volume [Sound Settings]
s (Settings 2) X Sound Settings
Submenu 2
Sound Type
Submenu 3
1/2/3
Application
Selects the camera sounds (operation sounds, shutter sound, and
warning sound).
q Volume
Selects the image playback volume.
0/1/2/3/4/5
0/1/2/3/4/5
Volume
Selects the operation volume of camera buttons.
Resetttingg tthe file namees of piicturees [File Name]
s (Settings 2) X File Name
Submenu 2
Application
Folder name
DCIM
Folder name
100OLYMP
File name
This resets the sequential number
for the folder name and file name
whenever a new card is inserted.*1
This is useful when grouping images
on separate cards.
Pmdd0001.jpg
Reset
Even when a new card is inserted,
this continues the numbering for
the folder name and file name from
the previous card. This is useful for
managing all image folder names
and files names with sequential
numbers.
999OLYMP
Pmdd9999.jpg
Auto
Automatic
numbering
Automatic
numbering
*1
The number for the folder name is reset to 100, and the
one for the file name is reset to 0001.
Month: 1 to C
(A=October,
B=November,
C=December)
Pmdd
Day: 01 to 31
50
EN
For information on using the menus, see “Setup menu” (p. 6).
Adjusting the image processing
function [Pixel Mapping]
Adjusting the brightness of the monitor
[s]
s (Settings 2) X Pixel Mapping
s (Settings 2) X s
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
To adjust the monitor brightness
1 Use FG to adjust the brightness while viewing the
screen, and then press the A button.
For best results, wait at least one minute after taking
or viewing pictures before performing pixel mapping.
If the camera is turned off during pixel mapping, be
sure to perform it again.
s
To adjust the image processing function
Press the A button when [Start] (Submenu 2) is
displayed.
MENU
OK
Set
Back
● The check and adjustment of the image processing
function starts.
Playing back images on a TV [TV Out]
s (Settings 2) X TV Out
The TV video signal system varies depending on the countries and regions. Before viewing camera images on your
TV, select the video output according to your TV’s video signal type.
Submenu 2
Video Out
Submenu 3
NTSC
Application
Connecting the camera to a TV in North America, Taiwan, Korea, Japan,
and so on.
PAL
Connecting the camera to a TV in European countries, China, and so on.
Set the signal format to be given priority. If the TV setting does not match,
it is changed automatically.
480p/576p, 720p,
1080i
HDMI Out
Operate with the camera.
Off
On
HDMI Control
Operate with the TV remote control.
The factory default settings differ according to the region where the camera is sold.
51
EN
For information on using the menus, see “Setup menu” (p. 6).
To play back camera iimagess on a TV
● Connection via AV cable
1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]).
2 Connect the TV and camera.
Open the connector cover
in the direction of the arrow.
Multi-connector
Connect to the TV video input
jack (yellow) and audio input jack
(white).
AV cable (supplied)
● Connection via HDMI cable
1 On the camera, select the digital signal format that will be connected ([480p/576p]/[720p]/[1080i]).
2 Connect the TV and camera.
3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”
4 Turn on the camera, and use HI to select the image for playback.
When the camera is connected to the computer by the USB cable, do not connect the HDMI cable to the camera.
Open the connector cover
in the direction of the arrow.
HDMI micro
connector
(type D)
Connect to the HDMI
connector on the TV.
Type A
HDMI cable (sold separately: CB-HD1)
52
EN
For information on using the menus, see “Setup menu” (p. 6).
Type C
Type D (CB-HD1)
For details on changing the input source of the TV, refer to the TV’s instruction manual.
When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority.
Depending on the TV’s settings, the displayed images and information may become cropped.
To operate images with the TV remote control
1 Set [HDMI Control] to [On], and turn off the camera.
2 Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 52)
3 First turn on the TV, and then turn on the camera.
● Operate by following the operation guide that is displayed on the TV.
With some TVs, operations cannot be performed with the TV remote control even though the operation guide is
displayed on the screen.
If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using the
camera.
Saving battery ppower between shots
[Power Save]
Changing the display language [l]
s (Settings 2) X l
s (Settings 2) X Power Save
Submenu 2
Languages
Application
Submenu 2
Application
The language for the menus and
error messages displayed on the
monitor is selected.
Off
On
Cancels [Power Save].
When the camera is not being used
for approx. 10 seconds, the monitor
automatically turns off to save
battery power.
To resume staandby mode
Press any button.
53
EN
For information on using the menus, see “Setup menu” (p. 6).
Setting the date and time [X]
t (Settings 3) X X
“Date, time, time zone, and language” (p. 17).
To select the date display order
1 Press I after setting Minute, and use FG to select the date
X
display order.
Y
M
D
Time
2 Press the A button to set.
Y/M/D
2011.02.26 00:00
To check the date and time
Press the INFO button while the camera is turned off. The current time
Date order
is displayed for approx. 3 seconds.
MENU
OK
Set
Cancel
Choosing home and alternate time zones [World Time]
t (Settings 3) X World Time
You will not be able to select a time zone using [World Time] if the camera clock has not first been set using [X].
Submenu 2
Submenu 3
Application
x
The time in the home time zone (the time zone selected for x in submenu 2).
Home/Alternate
The time in the travel destination time zone (the time zone selected for z in
submenu 2).
z
x*1
z*1, 2
—
—
Select the home time zone (x).
Select the travel destination time zone (z).
*1
In areas where daylight saving time is in effect, use FG to turn daylight saving time ([Summer]) on.
When you select a time zone, the camera automatically calculates the time difference between the selected zone and
the home time zone (x) to display the time in the travel destination time zone (z).
*2
Restorinng data in the camera [Dataa Repair]
t (Settings 3) X Data Repair
Playback will become available by performing [Data Repair] when the Photo surfing function is not activated
properly. However, data such as collections and other groups created with the [ib] (PC software) is deleted from the
database in the camera.
Import the data back into the camera from a computer to playback the data created with the [ib] (PC software).
54
EN
Printing
Direct printing (PictBridge*1)
Turn on the printer, and then connect the
printer and camera.
2
By connecting the camera to a PictBridge-compatible
printer, you can print images directly without using a
computer.
Open the connector cover
in the direction of the arrow.
To find out if your printer supports PictBridge, refer to the
printer’s instruction manual.
*1
PictBridge is a standard for connecting digital
cameras and printers of different makers and
printing out pictures directly.
Multi-connector
The printing modes, paper sizes, and other
parameters that can be set with the camera vary
depending on the printer that is used. For details,
refer to the printer’s instruction manual.
USB cable
(supplied)
For details on the available paper types, loading
paper, and installing ink cassettes, refer to the
printer’s instruction manual.
I button
Printing images at the printer’s
standard settings [Easy Print]
In the setup menu, set [USB Connection] to [Print].
“USB Connection” (p. 49)
Display the image to be printed on the
monitor.
1
Easy Print Start
Custom Print OK
“Viewing images” (p. 22)
Press I to start printing.
3
4
To print another image, use HI to select an
image, and press the A button.
To exit printing
After a selected image is displayed on the screen,
disconnect the USB cable from the camera and printer.
55
EN
Changing the printer’s settings for
printing [Custom Print]
Submenu 4
Off/On*1
Application
The image is printed with a border
around it ([Off]).
The image is printed to fill the entire
paper ([On]).
Follow Steps 1 and 2 for [Easy Print] (p. 55).
1
(The number of
images per sheet
varies depending
on the printer.)
Press the A button.
The number of images per sheet
([Pics/Sheet]) is selectable only when
[Multi Print] is selected in Step 3.
2
Use FG to select the print mode, and press
the A button.
3
*1
The available settings for [Borderless] vary depending
on the printer.
Submenu 2
Print
Application
If [Standard] is selected in Steps 4 and 5, the image
is printed at the printer’s standard settings.
This prints the image selected in
Step 6.
4/30
This prints all images stored in the
internal memory or card.
All Print
This prints one image in a multiple
layout format.
Multi Print
All Index
14M
NORM
FILE
100 0004
’11/02/26 00:00
This prints an index of all images
stored in the internal memory or card.
OK
Print
More
Single Print
This prints images based on the print
reservation data on the card.
Print Order*1
Use HI to select an image.
6
7
*1
[Print Order] is available only when print reservations
have been made. “Print Reservations (DPOF)” (p. 58)
Press F to make a print reservation for the
current image.
Press G to make the detailed printer settings
for the current image.
Use FG to select [Size] (Submenu 3), and
press I.
4
5
To make the detailed printer settings
1 Use FGHI to select the setting, and press the
A button.
If the [Printpaper] screen is not displayed, the [Size],
[Borderless], and [Pics/Sheet] are set to the printer’s
standard.
Use FG to select the [Borderless] or [Pics/
Sheet] settings, and press the A button.
56
EN
Submenu 5 Submenu 6
Application
Press the A button.
9
<X
0 to 10
This selects the number of prints.
Print
Selecting [With] prints the
images with the date.
Date
With/Without
Selecting [Without] prints the
images without the date.
Print
Cancel
Selecting [With] prints the file
name on the image.
File Name
With/Without Selecting [Without] does not
print any file name on the
image.
MENU
OK
Set
Back
Use FG to select [Print], and press the
A button.
10
(Proceeds to
This selects a portion of the
the setting
P
● Printing starts.
image for printing.
screen.)
● When [Option Set] is selected in [All Print] mode,
[Print Info] screen is displayed.
To crop an image [P]
● When printing is finished, the [Print Mode Select]
screen is displayed.
1 Use the zoom lever to select the size of the cropping
frame, use FGHI to move the frame, and then
press the A button.
To cancel printing
1 Press the m button while [Do Not Remove USB
Cropping frame
Cable] is displayed.
2 Select [Cancel] using FG and then press the A
button.
OK
Set
Do Not Remove USB Cable
2 Use FG to select [OK], and press the A button.
MENU
Cancel
Continue
Cancel
If necessary, repeat Steps 6 and 7 to select
the image to be printed, make the detailed
settings, and set [Single Print].
8
OK
Set
Press the m button.
11
12
When the message [Remove USB Cable] is
displayed, disconnect the USB cable from the
camera and printer.
57
EN
Print Reservations (DPOF*1)
4/30
0
In print reservations, the number of prints and date imprint
option are saved in the image on the card. This enables
easy printing at a printer or print shop supporting DPOF
by using only the print reservations on the card without a
computer or a camera.
14M
NORM
FILE
100 0004
’11/02/26 00:00
*1
DPOF is a standard for storing automatic printout
information from digital cameras.
OK
Set
Print reservations can be set only for the images
stored on the card. Insert a card with recorded
images before making print reservations.
Use HI to select the image for print
reservation. Use FG to select the quantity.
Press the A button.
4
DPOF reservations set by another DPOF device
cannot be changed by this camera. Make changes
using the original device. Making new DPOF
reservations with this camera will erase the
reservations made by the other device.
X
No
Date
Time
DPOF print reservations can be made for up to 999
images per card.
MENU
OK
Set
Back
Single-frame print reservations [<]
Use FG to select the [X] (date print)
screen option, and press the A button.
5
Display the setup menu.
1
“Setup menu” (p. 6)
Submenu 2
Application
No
This prints the image only.
From the playback menu q, select [Print
Order] and then press the A button.
2
This prints the image with the
shooting date.
Date
Time
Print Order
This prints the image with the
shooting time.
<
U
Print Order
(
)
1
1
MENU
OK
Set
Exit
Set
Cancel
Use FG to select [<], and press the
A button.
3
MENU
OK
Set
Back
58
EN
Resetting the print reservation data
for selected images
Use FG to select [Set], and press the
A button.
6
Reserving one print each of all images
on the card [
Follow Steps 1 and 2 in [<] (p. 58).
1
U]
Use FG to select [<], and press the
A button.
2
Follow Steps 1 and 2 in [<] (p. 58).
1
2
Use FG to select [Keep] and press the
A button.
3
Use FG to select [U], and press the A
button.
Use HI to select the image with the print
reservation you want to cancel. Use FG to
set the print quantity to “0”.
4
Follow Steps 5 and 6 in [<].
3
Resetting all print reservation data
If necessary, repeat Step 4, and then press
the A button when finished.
5
Follow Steps 1 and 2 in [<] (p. 58).
1
2
Use FG to select the [X] (date print)
screen option, and press the A button.
● The settings are applied to the remaining images
6
Select either [<] or [U], and press the
A button.
with the print reservation data.
Print Order Setting
Print Ordered
Use FG to select [Set], and press the
A button.
7
Reset
Keep
MENU
OK
Set
Back
Use FG to select [Reset], and press the
A button.
3
59
EN
Usage Tips
If the camera does not work as intended, or if an error
message is displayed on the screen, and you are unsure
of what to do, refer to the information below to fix the
problem(s).
● With prolonged camera use, the internal
temperature may increase, resulting in automatic
shutdown. If this occurs, remove the battery from
the camera and wait until the camera has sufficiently
cooled. The camera’s external temperature may
also increase during use, however this is normal and
does not indicate malfunction.
Troubleshooting
Battery
Monitor
“The camera does not work even when batteries are
installed”.
“Difficult to see”.
● Condensation*1 may have occurred. Turn off the
● Insert recharged batteries in the correct direction.
power, and wait for the camera body to become
acclimated to the surrounding temperature and dry
out before taking pictures.
“Inserting the battery” (p. 13), “Charging the battery
and setting up using the supplied CD” (p. 13),
“Charging the battery with the included USB-AC
adapter” (p. 16)
*1
Dew drops can form in the camera when it is
suddenly taken from a cold location into a warm,
humid room.
● Battery performance may have been reduced
temporarily due to low temperature. Take the
batteries out of the camera, and warm them by
putting them in your pocket for a while.
“Vertical lines appear on the screen”.
● This condition may occur when the camera is
pointed at an extremely bright subject under a clear
sky and so on. The lines do not appear, however,
in the final image.
Card/Internal memory
“An error message is displayed”.
“Error message” (p. 61)
“The light is caught in the picture”.
● Shooting with flash in dark situations results in an
image with many flash reflections on dust in the air.
Shutter button
“No picture is taken when the shutter button is pressed”.
Date andd time function
“Date and time settings return to the default setting”.
● Cancel sleep mode.
●
If the batteries are removed and left out of the
camera for about 3 days*2, the date and time settings
return to the default setting, and must be reset.
To save battery power, the camera automatically
goes into sleep mode and the monitor turns off
if there is no operation for 3 minutes when the
camera is turned on. No picture is taken even if
the shutter button is fully pressed in this mode.
Operate the zoom lever or other buttons to restore
the camera from sleep mode before taking a
picture. If the camera is left for another 12 minutes,
it automatically turns off. Press the n button
to turn the camera on.
*2
The time until the date and time settings return to
the default setting varies depending on how long
the batteries have been loaded.
“Date, time, time zone, and language” (p. 17)
Miscelllaneous
“The camera makes a noise when taking pictures”.
● The camera may activate the lens and make a
noise even if no operation is performed. This
is because the camera automatically performs
actions of auto focus as far as it is ready to shoot.
● Press the qbutton to switch to the shooting
mode.
● Wait until #(flash charge) stops blinking before
taking pictures.
60
EN
Error message
Error message
Corrective action
Problem with selected image
Use photo retouch software, etc. to
edit the image on a computer.
When one of the messages below is displayed on the
monitor, check the corrective action.
The Image Cannot
Be Edited
Error message
Corrective action
Card problem
Battery problem
Charge the battery.
Insert a new card.
Battery Empty
No Connection
No Paper
Card Error
Connection problem
Connect the camera and computer
or printer correctly.
Card problem
The card write-protect switch is
set to the “LOCK” side. Release
the switch.
Write Protect
Memory Full
Printer problem
Load paper into the printer.
Internal memory problem
• Insert a card.
• Erase unwanted images.*1
Printer problem
Refill the ink in the printer.
Card problem
No Ink
• Replace the card.
• Erase unwanted images.*1
Card Full
Printer problem
Remove the jammed paper.
Card Setup
Card problem
Jammed
Use FG to select [Format], and
press the A button. Next, use
FG to select [Yes], and press the
A button.*2
Power Off
Format
Printer problem
Return to the status where the
printer can be used.
Settings
Changed*3
OK
Set
Printer problem
Memory Setup
Internal memory problem
Turn off the camera and printer,
check the printer for any problems,
and then turn the power on again.
Use FG to select [Memory
Format], and press the A button.
Next, use FG to select [Yes], and
press the A button.*2
Power Off
Memory Format
Print Error
OK
Set
Problem with selected image
Use a computer to print.
Cannot Print*4
Internal memory/Card problem
*1
Take pictures before viewing them.
Before erasing important images, download them to a
computer.
All data will be erased.
This is displayed, for instance, when the printer’s paper
tray has been removed. Do not operate the printer while
making the print settings on the camera.
This camera may be unable to print images taken by
other cameras.
No Picture
*2
*3
Problem with selected image
Use photo retouch software, etc.
to view the image on a computer.
If the image still cannot be viewed,
the image file is corrupted.
Picture Error
*4
61
EN
Shooting tips
When you are unsure of how to take a picture that you
envision, refer to the information below.
Object with no vertical lines*1
Focusing
*1
It is also effective to compose the shot by holding the
camera vertically to focus, and then returning to the
horizontal position to take the picture.
“Focusing on the subject”
● Taking a picture of a subject not in the center
of the screen
After focusing on an object at the same distance
as the subject, compose the shot, and take the
picture.
When objects are at different
distances
Pressing the shutter button halfway (p. 20)
● Set [AF Mode] (p. 40) to [Face/iESP]
● Taking a picture in [AF Tracking] mode (p. 40)
The camera tracks the subject movement
automatically to focus on it continuously.
Fast-moving object
● Taking a picture of a shadowy subject
Using the AF illuminator makes focusing easier.
[AF Illuminat.] (p. 41)
● Taking a picture of subjects where autofocus
is difficult
The subject is not in the center of
the frame
In the following cases, after focusing on an object
(by pressing the shutter button halfway down) with
high contrast at the same distance as the subject,
compose the shot, and take the picture.
Subjects with low contrast
When extremely bright objects
appear in the center of the screen
62
EN
● Taking pictures of a white beach or snow scene
Camera shake
Set the mode to [q Beach & Snow] (p. 29)
● Taking pictures using exposure compensation
(p. 35)
“Taking pictures without camera shake”
● Taking pictures using [Image Stabilizer] (p. 41)
Adjust the brightness while viewing the screen for
taking the picture. Normally, taking pictures of white
subjects (such as snow) results in images that are
darker than the actual subject. Use the exposure
compensation to adjust in the positive (+) direction
to express whites as they appear. When taking
pictures of black subjects, on the other hand, it is
effective to adjust in the negative (-) direction.
The image pickup device*1 shifts to correct for
camera shake even if the ISO sensitivity is not
increased. This function is also effective when
taking pictures at a high zoom magnification.
*1
A device that takes light received through the
lens and converts it into electric signals.
● Shooting movies using [IS Movie Mode] (p. 41)
● Select [C Sport] in the scene mode (p. 29)
Color hue
The [C Sport] mode uses a fast shutter speed and
can reduce the blur incurred by a moving subject.
“Taking pictures with colors at the same shade as
they appear”
● Taking pictures at a high ISO sensitivity
If a high ISO sensitivity is selected, pictures can
be taken at a high shutter speed even at locations
where a flash cannot be used.
● Taking pictures by selecting white balance
(p. 36)
Best results in most environments can normally
be obtained with the [WB Auto] setting, but for
some subjects, you should try experimenting
with different settings. (This is especially true for
sunshade under a clear sky, mixed natural and
artificial light settings, and so on.)
“Selecting the ISO sensitivity” (p. 36)
Exposure (brightness)
“Taking pictures with the right brightness”
● Taking pictures of a subject against a backlight
Faces or backgrounds are bright even when shot
against backlight.
Image quality
[Shadow Adjust] (p. 40)
“Taking sharper pictures”
● Taking pictures using [Face/iESP] (p. 40)
Appropriate exposure is obtained for a face against
backlight, and the face is brightened.
● Taking pictures with the optical zoom
Avoid using digital zoom (p. 41) to take pictures.
● Taking pictures at a low ISO sensitivity
If the picture is taken with a high ISO sensitivity,
noise (small colored spots and color unevenness
that were not in the original image) can occur, and
the image can appear grainy.
● Taking pictures using [n] for [ESP/n]
(p. 40)
Brightness is matched with a subject in the center
of the screen and the image is not affected by
background light.
“Selecting the ISO sensitivity” (p. 36)
● Taking pictures using [Fill In] (p. 34) flash
A subject against backlight is brightened.
63
EN
Playback/Editing tips
Panorama
“Taking pictures so that the frames are stitched
smoothly”
Playback
● A tip for panoramic shooting
“Playing images in the internal memory and card”
Taking pictures by pivoting with the camera at the
center prevents shifting of the image. When taking
pictures of close objects in particular, pivoting with
the lens end at the center produces favorable
results.
● Remove the card and display the images in
internal memory
● “Inserting the battery” (p. 13), “Inserting the
card” (p. 17)
[Panorama] (p. 30)
“Viewing images with high picture quality on a high-
definition TV”
● Connect the camera to the TV using an HDMI
cable (sold separately)
Batteries
● “To play back camera images on a TV” (p. 51)
“Making batteries last longer”
● Avoid any of the following operations when not
actually taking pictures because they deplete
the battery power
Editing
● Repeatedly pressing the shutter button
halfway.
“Erasing the sound recorded to a still image”
● Record over the sound with silence when
playing back the image
● Repeatedly using the zoom.
● Set [Power Save] (p. 53) to [On]
“Adding sound to still images [R]” (p. 45)
64
EN
Appendix
Camera care
Battery and USB-AC adapter
•
This camera uses one Olympus lithium ion battery
(LI-50B). No other type of batteries can be used.
Exterior
•
Wipe gently with a soft cloth. If the camera is very dirty,
soak the cloth in mild soapy water and wring well. Wipe
the camera with the damp cloth and then dry it with a
dry cloth. If you have used the camera at the beach,
use a cloth soaked in clean water and wrung well.
Caution:
There is a risk of explosion if the battery is replaced
with the incorrect battery type.
Dispose of the used battery following the instructions.
(p. 72)
Power consumption by the camera varies depending on
which functions are used.
During the conditions described below, power is
consumed continuously and the battery becomes
exhausted quickly.
Monitor
•
•
•
Wipe gently with a soft cloth.
Lens
•
Blow dust off the lens with a commercial blower, then
wipe gently with a lens cleaner.
•
•
The zoom is used repeatedly.
Battery/USB-AC adapter
The shutter button is pressed halfway repeatedly in
shooting mode, activating the auto focus.
A picture is displayed on the monitor for an extended
period of time.
•
Wipe gently with a soft, dry cloth.
Do not use strong solvents such as benzene or
alcohol, or chemically treated cloth.
•
•
The camera is connected to a printer.
Mold may form on the lens surface if the lens is left
dirty.
•
•
Using an exhausted battery may cause the camera to
turn off without displaying the battery level warning.
The rechargeable battery is not fully charged at the
time of purchase. Before using the camera, charge it
by connecting it to a computer, or charge it using the
included USB-AC adapter F-2AC or a separately sold
charger LI-50C.
When the included USB-AC adapter F-2AC is used,
charging usually takes approximately 3.5 hours (varies
on usage).
The included USB-AC adapter is for charging. The
playback is available while charging. Do not take a
picture while the USB-AC adapter is connected to the
camera.
Storage
•
When storing the camera for extended periods, remove
the battery, USB-AC adapter and card, and keep in a
cool, dry place that is well ventilated.
•
•
•
Periodically insert the battery and test the camera
functions.
Avoid leaving the camera in places where chemical
products are handled since this may result in
corrosion.
•
•
The included USB-AC adapter F-2AC is designed to be
used only with this camera. Other cameras cannot be
charged with this USB-AC adapter.
Do not connect the included USB-AC adapter F-2AC to
equipment other than this camera.
65
EN
•
For plug-in type USB-AC adapter:
The included USB-AC adapter F-2AC is intended to be
correctly orientated in a vertical or floor mount position.
Using the card
A card (and internal memory) also corresponds to the
film that records images in a film camera. Otherwise, the
recorded images (data) can be erased, and retouching is
also available with the use of a computer. Cards can be
removed from the camera and exchanged, but this is not
possible with the internal memory. Use of larger capacity
cards enables you to take more pictures.
Charging the battery by connecting the
camera to a computer
The battery can be charged by connecting the camera to
a computer.
Cards ccompattible with this camera
SD/SDHC/SDXC/Eye-Fi card (commercially available) (for
compatibility card details, visit the Olympus website.)
Using a separately sold AC adapter
The USB-AC adapter F-3AC (sold separately) can be
used with this camera. Do not use any AC adapter other
than the dedicated one. When using F-3AC, be sure to
use the USB cable included with this camera.
Do not use any other AC adapter with this camera.
Using a separately sold charger
A charger (LI-50C: sold separately) can be used to charge
the battery. In this case, remove the battery from the
camera and set the battery to the charger.
SD/SDHC/SDDXC caard wrriite-proteect swwitch
The SD/SDHC/SDXC card body has a write-protect
switch.
If you set the switch to the “LOCK” side, you will not be
able to write to the card, delete data or format. Return the
switch to enable writing.
Using your charger and USB-AC
adapter abroad
•
The charger and USB-AC adapter can be used in
most home electrical sources within the range of 100 V
to 240 V AC (50/60Hz) around the world. However,
depending on the country or area you are in, the AC
wall outlet may be shaped differently and the charger
and USB-AC adapter may require a plug adapter to
match the wall outlet. For details, ask at your local
electrical shop or travel agent.
LOCK
Using a new card
Cards must be formatted with this camera before first use
or after being used with other cameras or computers.
[Memory Format]/[Format] (p. 48)
•
Do not use travel voltage converters as they could
damage your charger and USB-AC adapter.
Eye-Fi card
•
•
•
•
Use commercially available Eye-Fi cards.
The Eye-Fi card may become hot during use.
When using an Eye-Fi card, the battery may run out faster.
When using an Eye-Fi card, the camera may function
more slowly.
66
EN
Checkiing the image savinng location
The memory indicator shows whether the internal memory
or card is being used during shooting and playback.
Readouut/recorrding process of the card
During shooting, the current memory indicator lights up
in red while the camera is writing data. Never open the
battery/card compartment cover or unplug the USB cable.
This can not only damage the image data but also render
the internal memory or card unusable.
Current memory indicator
v: Internal memory is being used
w: Card is being used
P
Current memory
indicator
P
0.0
WB
AUTO
ISO
0.0
AUTO
WB
00:34
AUTO
ISO
14M
AUTO
4
00:34
14M
4
4/30
Lights up in red
Shooting mode
’11/02/26 12:30
Playback mode
Even if [Memory Format]/[Format], [Erase], [Sel.
Image], or [All Erase] is performed, the data in the
card is not completely erased. When disposing of the
card, damage the card to prevent the disclosure of
personal data.
67
EN
Number oof storaabble pictures (still images)/Continuous recording length (movies) in thee
internal memoryy and cards
The figures in the following tables are quoted only as a rough guideline. The actual number of storable pictures or
continuous recording lengths will differ according to the shooting conditions and memory cards used.
The figures in the table below are the number of the storable pictures when using the internal memory formatted.
[Memory Format]/[Format] (p. 48)
Still pictures
Number of storable still pictures
IMAGE SIZE
COMPRESSION
Internal memory
SD/SDHC/SDXC card (1GB)
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
7
15
8
122
242
( 4608x3456
(SZ-20)
141
6 4288x3216
(SZ-10)
17
15
29
24
46
38
75
62
118
94
180
316
542
10
20
11
277
241
4 3264x2448
n 2560x1920
3 2048x1536
2 1600x1200
1 1280x960
7 640x480
469
385
738
618
1,211
992
1,892
1,514
2,884
5,047
8,652
162
K 4608x2592
(SZ-20)
320
187
4288x2416
(SZ-10)
23
57
111
367
917
0 1920x1080
1,781
68
EN
Movies
Continuous recording length
Internal memory SD/SDHC/SDXC card (1GB)
IMAGE SIZE
IMAGE QUALITY
With sound
Without sound
25 sec.
With sound
Without sound
T 1920x1080*1
L
M
L
M
L
M
L
24 sec.
37 sec.
7 min. 3 sec.
7 min. 8 sec.
(SZ-20)
37 sec.
10 min. 32 sec. 10 min. 42 sec.
10 min. 32 sec. 10 min. 42 sec.
20 min. 44 sec. 21 min. 24 sec.
20 min. 44 sec. 21 min. 24 sec.
40 min. 10 sec. 42 min. 45 sec.
40 min. 10 sec. 42 min. 45 sec.
37 sec.
37 sec.
L 1280x720*1
1 min. 12 sec.
1 min. 12 sec.
2 min. 21 sec.
2 min. 21 sec.
1 min. 15 sec.
1 min. 15 sec.
2 min. 30 sec.
2 min. 30 sec.
8 640x480
9 320x240
*1
The continuous recording length is up to 29 minutes in the HD quality specified.
The maximum file size of a single movie is 4 GB, regardless of the capacity of the card.
Increasinng the number of pictures that can be taken
Either erase unwanted images, or connect the camera to a computer or other device to save the images, and then erase
the images in the internal memory or card. [Erase] (p. 24, 46), [Sel. Image] (p. 47), [All Erase] (p. 47),
[Memory Format]/[Format] (p. 48)
69
EN
Attachments — For your safety, and to avoid damaging the
product, use only accessories recommended by Olympus.
Water and Moisture — For precautions on products with
weatherproof designs, read the weatherproofing sections.
Location — To avoid damage to the product, mount the product
securely on a stable tripod, stand, or bracket.
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Power Source — Connect this product only to the power
source described on the product label.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS
SERVICE PERSONNEL.
Lightning — If a lightning storm occurs while using a USB-AC
adapter, remove it from the wall outlet immediately.
Foreign Objects — To avoid personal injury, never insert a
metal object into the product.
Heat — Never use or store this product near any heat source
such as a radiator, heat register, stove, or any type of
equipment or appliance that generates heat, including stereo
amplifiers.
An exclamation mark enclosed in a
triangle alerts you to important operating
and maintenance instructions in the
documentation provided with the product.
Handling the Camera
WARNING
Do not use the camera near flammable or explosive gases.
Do not use the flash and LED (including AF illuminator) on
people (infants, small children, etc.) at close range.
• You must be at least 1 m (3 ft.) away from the faces of your
subjects. Firing the flash too close to the subject’s eyes could
cause a momentary loss of vision.
DANGER
If the product is used without observing
the information given under this symbol,
serious injury or death may result.
•
•
WARNING If the product is used without observing
the information given under this symbol,
injury or death may result.
CAUTION
If the product is used without observing
the information given under this symbol,
minor personal injury, damage to the
equipment, or loss of valuable data may
result.
•
Keep young children and infants away from the camera.
• Always use and store the camera out of the reach of young
children and infants to prevent the following dangerous
situations which could cause serious injury:
• Becoming entangled in the camera strap, causing
strangulation.
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK,
NEVER DISASSEMBLE, EXPOSE THIS PRODUCT
TO WATER OR OPERATE IN A HIGH HUMIDITY
ENVIRONMENT.
• Accidentally swallowing the battery, cards or other small
parts.
• Accidentally firing the flash into their own eyes or those of
another child.
• Accidentally being injured by the moving parts of the
camera.
General Preccautions
Read All Instructions — Before you use the product, read all
operating instructions. Save all manuals and documentation
for future reference.
Cleaning — Always unplug this product from the wall outlet
before cleaning. Use only a damp cloth for cleaning. Never
use any type of liquid or aerosol cleaner, or any type of
organic solvent to clean this product.
•
•
•
•
Do not look at the sun or strong lights with the camera.
Do not use or store the camera in dusty or humid places.
Do not cover the flash with a hand while firing.
Use SD/SDHC/SDXC memory cards or Eye-Fi cards only. Never
use other types of cards.
If you accidently insert another type of card into the camera,
contact an authorized distributor or service center. Do not try to
remove the card by force.
70
EN
• Never store batteries where they will be exposed to direct
sunlight, or subjected to high temperatures in a hot vehicle,
near a heat source, etc.
• To prevent causing battery leaks or damaging their terminals,
carefully follow all instructions regarding the use of batteries.
Never attempt to disassemble a battery or modify it in any
way, solder, etc.
• If battery fluid gets into your eyes, flush your eyes immediately
with clear, cold running water and seek medical attention
immediately.
• Always store batteries out of the reach of small children. If a
child accidentally swallows a battery, seek medical attention
immediately.
CAUTION
•
Stop using the camera immediately if you notice any unusual
odors, noise, or smoke around it.
• Never remove the batteries with bare hands, which may
cause a fire or burn your hands.
Never hold or operate the camera with wet hands.
Do not leave the camera in places where it may be subject to
extremely high temperatures.
• Doing so may cause parts to deteriorate and, in some
circumstances, cause the camera to catch fire. Do not use
the charger or USB-AC adapter if it is covered (such as a
blanket). This could cause overheating, resulting in fire.
Handle the camera with care to avoid getting a low-temperature
burn.
• When the camera contains metal parts, overheating can
result in a low-temperature burn. Pay attention to the
following:
•
•
•
WARNING
• Keep batteries dry at all times.
• To prevent batteries from leaking, overheating, or causing a
fire or explosion, use only batteries recommended for use with
this product.
• Insert the battery carefully as described in the operating
instructions.
• When used for a long period, the camera will get hot. If you
hold on to the camera in this state, a low-temperature burn
may be caused.
• In places subject to extremely cold temperatures, the
temperature of the camera’s body may be lower than the
environmental temperature. If possible, wear gloves when
handling the camera in cold temperatures.
Be careful with the strap.
• If rechargeable batteries have not been recharged within the
specified time, stop charging them and do not use them.
• Do not use a battery if it is cracked or broken.
• If a battery leaks, becomes discolored or deformed, or
becomes abnormal in any other way during operation, stop
using the camera.
• If a battery leaks fluid onto your clothing or skin, remove the
clothing and flush the affected area with clean, running cold
water immediately. If the fluid burns your skin, seek medical
attention immediately.
•
• Be careful with the strap when you carry the camera. It could
easily catch on stray objects and cause serious damage.
Batteryy Handliing Precaautionns
• Never subject batteries to strong shocks or continuous
vibration.
Follow these important guidelines to prevent
batteries from leaking, overheating, burning,
exploding, or causing electrical shocks or
burns.
CAUTION
• Before loading, always inspect the battery carefully for leaks,
discoloration, warping, or any other abnormality.
• The battery may become hot during prolonged use. To avoid
minor burns, do not remove it immediately after using the
camera.
DANGER
• The camera uses a lithium ion battery specified by Olympus.
Charge the battery with the specified USB-AC adapter or
charger. Do not use any other USB-AC adapters or chargers.
• Never heat or incinerate batteries.
• Take precautions when carrying or storing batteries to prevent
them from coming into contact with any metal objects such as
jewelry, pins, fasteners, etc.
• Always unload the battery from the camera before storing the
camera for a long period.
71
EN
• Always charge a battery when using it for the first time, or if it
has not been used for a long period.
Caution for Usage Environment
• To protect the high-precision technology contained in this
product, never leave the camera in the places listed below, no
matter if in use or storage:
• Places where temperatures and/or humidity are high or go
through extreme changes. Direct sunlight, beaches, locked
cars, or near other heat sources (stove, radiator, etc.) or
humidifiers.
• In sandy or dusty environments.
• Near flammable items or explosives.
• In wet places, such as bathrooms or in the rain. When using
products with weatherproof designs, read their manuals
as well.
• In places prone to strong vibrations.
• Never drop the camera or subject it to severe shocks or
vibrations.
• When attaching the camera to or removing it from a tripod,
rotate the tripod screw, not the camera.
• Before transporting the camera, remove a tripod and all other
non-OLYMPUS accessories.
• When operating the camera with battery power at low
temperatures, try to keep the camera and spare battery
as warm as possible. A battery that has run down at low
temperatures may be restored after it is warmed at room
temperature.
• The number of pictures you can take may vary depending on
the shooting conditions or battery.
• Before going on a long trip, and especially before traveling
abroad, purchase extra batteries. A recommended battery may
be difficult to obtain while traveling.
• When storing the battery for a long period, select a cool
location for storage.
• Please recycle batteries to help save our planet’s resources.
When you throw away dead batteries, be sure to cover their
terminals and always observe local laws and regulations.
LCD Monitor
• Do not push the monitor forcibly; otherwise the image may
become vague, resulting in a playback mode failure or damage
to the monitor.
• A strip of light may appear on the top/bottom of the monitor, but
this is not a malfunction.
• Do not touch electric contacts on cameras.
• Do not leave the camera pointed directly at the sun. This may
cause lens or shutter curtain damage, color failure, ghosting on
the image pickup device, or may possibly cause fires.
• Do not push or pull severely on the lens.
• When a subject is viewed diagonally in the camera, the
edges may appear zigzagged on the monitor. This is not a
malfunction; it will be less noticeable in playback mode.
• In places subject to low temperatures, the LCD monitor may
take a long time to turn on or its color may change temporarily.
When using the camera in extremely cold places, it is a good
idea to occasionally place it in a warm place. An LCD monitor
exhibiting poor performance due to low temperatures will
recover in normal temperatures.
• The LCD used for the monitor is made with high-precision
technology. However, black spots or bright spots of light
may appear constantly on the LCD Monitor. Due to its
characteristics or the angle at which you are viewing the
monitor, the spot may not be uniform in color and brightness.
This is not a malfunction.
• Before storing the camera for a long period, remove the
batteries. Select a cool, dry location for storage to prevent
condensation or mold from forming inside the camera. After
storage, test the camera by turning it on and pressing the
shutter button to make sure that it is operating normally.
• The camera may malfunction if it is used in a location where
it is subject to a magnetic/electromagnetic field, radio waves,
or high voltage, such as near a TV set, microwave, video
game, loud speakers, large monitor unit, TV/radio tower, or
transmission towers. In such cases, turn the camera off and on
again before further operation.
• Always observe the operating environment restrictions
described in the camera’s manual.
Batteryy Handliing Precaautionns
Legal and Other Notices
• This camera uses a lithium ion battery specified by Olympus.
Do not use any other type of battery.
• If the battery’s terminals get wet or greasy, camera contact
failure may result. Wipe the battery well with a dry cloth
before use.
• Olympus makes no representations or warranties regarding
any damages, or benefit expected by using this unit lawfully,
or any request from a third person, which are caused by the
inappropriate use of this product.
• Olympus makes no representations or warranties regarding
any damages or any benefit expected by using this unit
lawfully which are caused by erasing picture data.
72
EN
Disclaaimerr oof Warrranty
FCC Notice
• Olympus makes no representations or warranties, either
expressed or implied, by or concerning any content of these
written materials or software, and in no event shall be liable
for any implied warranty of merchantability or fitness for any
particular purpose or for any consequential, incidental or
indirect damages (including but not limited to damages for loss
of business profits, business interruption and loss of business
information) arising from the use or inability to use these
written materials or software or equipment. Some countries do
not allow the exclusion or limitation of liability for consequential
or incidental damages or of the implied warranty, so the above
limitations may not apply to you.
• Radio and Television Interference
• Changes or modifications not expressly approved by the
manufacturer may void the user’s authority to operate this
equipment. This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation.
• This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
• Olympus reserves all rights to this manual.
• However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
Warning
Unauthorized photographing or use of copyrighted material
may violate applicable copyright laws. Olympus assumes no
responsibility for unauthorized photographing, use or other acts
that infringe upon the rights of copyright owners.
• Adjust or relocate the receiving antenna.
• Increase the distance between the camera and receiver.
• Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
Copyright Notice
• Consult your dealer or an experienced radio/TV technician
for help. Only the OLYMPUS-supplied USB cable should
be used to connect the camera to USB enabled personal
computers (PC).
All rights reserved. No part of these written materials or this
software may be reproduced or used in any form or by any
means, electronic or mechanical, including photocopying
and recording or the use of any type of information storage
and retrieval system, without the prior written permission of
Olympus. No liability is assumed with respect to the use of the
information contained in these written materials or software, or
for damages resulting from the use of the information contained
therein. Olympus reserves the right to alter the features and
contents of this publication or software without obligation or
advance notice.
Any unauthorized changes or modifications to this equipment
would void the user’s authority to operate it.
Use Only Dedicated Rechaargeable BBattery,
Battery CCharger aannd USB-ACC adapter
We strongly recommend that you use only the genuine Olympus
dedicated rechargeable battery, battery charger and USB-AC
adapter with this camera. Using a non-genuine rechargeable
battery, battery charger and/or USB-AC adapter may result
in fire or personal injury due to leakage, heating, ignition or
damage to the battery. Olympus does not assume any liability
for accidents or damage that may result from the use of a
battery, battery charger and/or USB-AC adapter that are not
genuine Olympus accessories.
73
EN
Repair, replacement, or adjustment of defective Products shall
be Olympus’s sole obligation and the customer’s sole remedy
hereunder.
The customer is liable and shall pay for shipment of the
Products to the Olympus Service Center.
Olympus shall not be obligated to perform preventive
maintenance, installation, deinstallation, or maintenance.
Olympus reserves the right to (i) use reconditioned, refurbished,
and/or serviceable used parts (that meet Olympus’s quality
assurance standards) for warranty or any other repairs and (ii)
make any internal or external design and/or feature changes
on or to its products without any liability to incorporate such
changes on or to the Products.
For customers in North and South America
For customers in USA
Declaration of Conformity
Model Number:
Trade Name:
SZ-10/SZ-20
OLYMPUS
Responsible Party:
Address:
3500 Corporate Parkway, P.O. Box 610,
Center Valley, PA 18034-0610, U.S.A.
484-896-5000
Telephone Number:
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
WHAT IS NOT COVERED BY THIS LIMITED
WARRANTY
Excluded from this limited warranty and not warranted by
Olympus in any fashion, either express, implied, or by statute,
are:
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
(a) products and accessories not manufactured by Olympus
and/or not bearing the “OLYMPUS” brand label (the
warranty coverage for products and accessories of other
manufacturers, which may be distributed by Olympus, is the
responsibility of the manufacturers of such products and
accessories in accordance with the terms and duration of
such manufacturers’ warranties);
(b) any Product which has been disassembled, repaired,
tampered with, altered, changed, or modified by persons
other than Olympus’s own authorized service personnel
unless repair by others is made with the written consent of
Olympus;
(c) defects or damage to the Products resulting from wear,
tear, misuse, abuse, negligence, sand, liquids, impact,
improper storage, nonperformance of scheduled operator
and maintenance items, battery leakage, use of non-
“OLYMPUS” brand accessories, consumables, or supplies,
or use of the Products in combination with non-compatible
devices;
For customers in CANADA
This Class B digital apparatus complies with Canadian ICES-
003.
OLYMPUS WORLDWIDE LIMITED WARRANTY
- IMAGING PRODUCTS
Olympus warrants that the enclosed Olympus® imaging
product(s) and related Olympus® accessories (individually
a “Product” and collectively the “Products”) will be free from
defects in materials and workmanship under normal use and
service for a period of one (1) year from the date of purchase.
If any Product proves to be defective within the one-year
warranty period, the customer must return the defective Product
to any of Olympus Service Centers, following the procedure
set forth below (See “WHAT TO DO WHEN SERVICE IS
NEEDED”).
Olympus, at its sole discretion, will repair, replace, or adjust
the defective Product, provided that Olympus investigation and
factory inspection disclose that (a) such defect developed under
normal and proper use and (b) the Product is covered under this
limited warranty.
(d) software programs;
(e) supplies and consumables (including but not limited to
lamps, ink, paper, film, prints, negatives, cables and
batteries); and/or
(f) Products which do not contain a validly placed and recorded
Olympus serial number, unless they are a model on which
Olympus does not place and record serial numbers.
74
EN
EXCEPT FOR THE LIMITED WARRANTY SET FORTH
ABOVE, OLYMPUS MAKES NO AND DISCLAIMS ALL OTHER
REPRESENTATIONS, GUARANTIES, CONDITIONS, AND
WARRANTIES CONCERNING THE PRODUCTS, WHETHER
DIRECT OR INDIRECT, EXPRESS OR IMPLIED, OR ARISING
UNDER ANY STATUTE, ORDINANCE, COMMERCIAL USAGE
OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY
WARRANTY OR REPRESENTATION AS TO THE SUITABILITY,
DURABILITY, DESIGN, OPERATION, OR CONDITON OF
THE PRODUCTS (OR ANY PART THEREOF) OR THE
MERCHANTABILITY OF THE PRODUCTS OR THEIR FITNESS
FOR A PARTICULAR PURPOSE, OR RELATING TO THE
INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER
PROPRIETARY RIGHT USED OR INCLUDED THEREIN.
IF ANY IMPLIED WARRANTIES APPLY AS A MATTER OF LAW,
THEY ARE LIMITED IN DURATION TO THE LENGTH OF THIS
LIMITED WARRANTY.
SOME STATES MAY NOT RECOGNIZE A DISCLAIMER OR
LIMITATION OF WARRANTIES AND/OR LIMITATION OF
LIABILITY SO THE ABOVE DISCLAIMERS AND EXCLUSIONS
MAY NOT APPLY.
THE CUSTOMER MAY ALSO HAVE DIFFERENT AND/OR
ADDITIONAL RIGHTS AND REMEDIES THAT VARY FROM
STATE TO STATE.
THE CUSTOMER ACKNOWLEDGES AND AGREES THAT
OLYMPUS SHALL NOT BE RESPONSIBLE FOR ANY
DAMAGES THAT THE CUSTOMER MAY INCUR FROM
DELAYED SHIPMENT, PRODUCT FAILURE, PRODUCT
DESIGN, SELECTION, OR PRODUCTION, IMAGE OR DATA
LOSS OR IMPAIRMENT OR FROM ANY OTHER CAUSE,
WHETHER LIABILITY IS ASSERTED IN CONTRACT, TORT
(INCLUDING NEGLIGENCE AND STRICT PRODUCT
LIABILITY) OR OTHERWISE. IN NO EVENT SHALL
OLYMPUS BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND
(INCLUDING WITHOUT LIMITATION LOSS OF PROFITS OR
LOSS OF USE), WHETHER OR NOT OLYMPUS SHALL BE
OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH
POTENTIAL LOSS OR DAMAGE.
Representations and warranties made by any person, including
but not limited to dealers, representatives, salespersons, or
agents of Olympus, which are inconsistent or in conflict with
or in addition to the terms of this limited warranty, shall not be
binding upon Olympus unless reduced to writing and approved
by an expressly authorized officer of Olympus.
This limited warranty is the complete and exclusive statement of
warranty which Olympus agrees to provide with respect to the
Products and it shall supersede all prior and contemporaneous
oral or written agreements, understandings, proposals, and
communications pertaining to the subject matter hereof.
This limited warranty is exclusively for the benefit of the original
customer and cannot be transferred or assigned.
WHAT TO DO WHEN SERVICE IS NEEDED
The customer must transfer any image or other data saved on
a Product to another image or data storage medium and/or
remove any film from the Product prior to sending the Product to
Olympus for service.
IN NO EVENT SHALL OLYMPUS BE RESPONSIBLE FOR
SAVING, KEEPING OR MAINTAINING ANY IMAGE OR DATA
SAVED ON A PRODUCT RECEIVED BY IT FOR SERVICE,
OR ON ANY FILM CONTAINED WITHIN A PRODUCT
RECEIVED BY IT FOR SERVICE, NOR SHALL OLYMPUS BE
RESPONSIBLE FOR ANY DAMAGES IN THE EVENT ANY
IMAGE OR DATA IS LOST OR IMPAIRED WHILE SERVICE IS
BEING PERFORMED (INCLUDING, WITHOUT LIMITATION,
DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES, LOSS OF PROFITS OR LOSS OF USE),
WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE
AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS
OR IMPAIRMENT.
Package the Product carefully using ample padding material to
prevent damage in transit and either deliver it to the Authorized
Olympus Dealer that sold you the Product or ship it postage
prepaid and insured to any of our Olympus Service Centers.
When returning Products for service, your package should
include the following:
75
EN
1
2
Sales receipt showing date and place of purchase.
Copy of this limited warranty bearing the Product serial
number corresponding to the serial number on the
Product (unless it is a model on which Olympus does not
place and record serial numbers).
A detailed description of the problem.
Sample prints, negatives, digital prints (or files on disk) if
available and related to the problem.
Provisions of warranty
1
If this product proves to be defective, although it has been
used properly (in accordance with the written Handling
Care and Operating instructions supplied with it), during the
applicable national warranty period and has been purchased
from an authorized Olympus distributor within the business
area of Olympus Europa Holding GmbH as stipulated on
repaired, or at Olympus’s option replaced, free of charge.
To claim under this warranty the customer must take the
product before the end of the applicable national warranty
period to the dealer where the product was purchased or any
other Olympus service station within the business area of
Olympus Europa Holding GmbH as stipulated on the website:
World Wide Guarantee the customer may turn the product in
at any Olympus service station. Please notice that not in all
countries such Olympus service station exists.
3
4
When service is completed, the Product will be returned to you
postage prepaid.
WHERE TO SEND PRODUCT FOR SERVICE
See “WORLDWIDE WARRANTY” for the nearest service center.
INTERNATIONAL WARRANTY SERVICE
International warranty service is available under this warranty.
For customers in Europe
2
The customer shall transport the product to the dealer or
Olympus authorized service station at his own risk and shall
be responsible for any costs incurred in transporting the
product.
“CE” mark indicates that this product complies
with the European requirements for safety,
health, environment and customer protection.
“CE” mark cameras are intended for sales in
Europe.
Provisions of Guarantee
1
“OLYMPUS IMAGING CORP., Shinjuku Monolith, 2-3-1
Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0914, Japan grants a
one year World Wide Guarantee. This worldwide Guarantee
must be presented at an Olympus authorized repair service
station before any repair can be made under conditions
of this Guarantee. This Guarantee is valid only if the
Guarantee Certificate and proof of purchase are presented
at the Olympus repair service station. Please note that this
Guarantee is in addition to and does not affect the customer’s
legal warranty rights under the applicable national legislation
governing the sale of consumer goods mentioned above.
This Guarantee does not cover the following and the
customer will be required to pay repair charge, even for
defects occurring within the Guarantee period referred to
above.
This symbol [crossed-out wheeled bin WEEE
Annex IV] indicates separate collection of waste
electrical and electronic equipment in the EU
countries.
Please do not throw the equipment into the
domestic refuse.
Please use the return and collection systems
available in your country for the disposal of
this product.
2
This symbol [crossed-out wheeled bin
Directive 2006/66/EC Annex II] indicates
separate collection of waste batteries in the
EU countries.
Please do not throw the batteries into the
domestic refuse. Please use the return and
collection systems available in your country for
the disposal of the waste batteries.
76
EN
a. Any defect that occurs due to mishandling (such as an
operation performed that is not mentioned in the Handling
Care or other sections of the instructions, etc.)
b. Any defect that occurs due to repair, modification, cleaning,
etc. performed by anyone other than Olympus or an
Olympus authorized service station.
Notes regarding Guarantee maintenance
1
This Guarantee will only be valid if the Guarantee Certificate
is duly completed by Olympus or an authorized dealer or
other documents contain sufficient proof. Therefore, please
make sure that your name, the name of the dealer, the
serial number and the year, month and date of purchase
are all completed or the original invoice or the sales receipt
(indicating the dealer’s name, the date of purchase and
product type) is attached to this Guarantee Certificate.
Olympus reserves the right to refuse free-of-charge service
if neither Guarantee Certificate is completed nor the above
document is attached or if the information contained in it is
incomplete or illegible.
c. Any defect or damage that occurs due to transport, a fall,
shock, etc. after purchase of the product.
d. Any defect or damage that occurs due to fire, earthquake,
flood damage, thunderbolt, other natural disasters,
environmental pollution and irregular voltage sources.
e. Any defect that occurs due to careless or improper
storage (such as keeping the product under conditions
of high temperature and humidity, near insect repellents
such as naphthalene or harmful drugs, etc.), improper
maintenance, etc.
2
Since this Guarantee Certificate will not be re-issued, keep it
in a safe place.
*
com for the authorized international Olympus service
network.
f. Any defect that occurs due to exhausted batteries, etc.
g. Any defect that occurs due to sand, mud, etc. entering the
inside of the product casing.
h. When the Guarantee Certificate is not returned with the
product.
For customers in Asia
i. When any alterations whatsoever are made to the
Guarantee Certificate regarding the year, month and date
of purchase, the customer’s name, the dealer’s name, and
the serial number.
j. When proof of purchase is not presented with this
Guarantee Certificate.
This Guarantee applies to the product only; the Guarantee
does not apply to any other accessory equipment, such as
the case, strap, lens cap and batteries.
Olympus’s sole liability under this Guarantee shall be limited
to repairing or replacing the product. Any liability under the
Guarantee for indirect or consequential loss or damage of
any kind incurred or suffered by the customer due to a defect
of the product, and in particular any loss or damage caused
to any lenses, films, other equipment or accessories used
with the product or for any loss resulting from a delay in repair
or loss of data, is excluded. Compelling regulations by law
remain unaffected by this.
Provisions of warranty
1
lf this product proves to be defective, although it has been
used properly (in accordance with the written Handling Care
and Operating instructions supplied with it), during a period
of up to one year from the date of purchase this product
will be repaired, or at Olympus’s option replaced, free of
charge. To claim under warranty the customer must take the
product and this Warranty certificate before the end of the
one year warranty period to the dealer where the product was
purchased or any Olympus authorized service station listed in
the instructions and request the necessary repairs.
The customer shall transport the product to the dealer or
Olympus authorized service station at his own risk and shall
be responsible for any costs incurred in transporting the
product.
3
4
2
3
This warranty does not cover the following and the customer
will be required to pay repair charge, even for defects
occurring within the one year period referred to above.
77
EN
a. Any defect that occurs due to mishandling (such as an
operation performed that is not mentioned in the Handling
Care or other sections of the instructions, etc.)
b. Any defect that occurs due to repair, modification, cleaning,
etc. performed by anyone other than Olympus or an
Olympus authorized service station.
Notes;
1
This Warranty is in addition to and does not affect the
customer’s statutory right.
2
lf you have any queries regarding this Warranty, call any
of the Olympus authorized service stations listed in the
instructions.
c. Any defect or damage that occurs due to transport, a fall,
shock, etc. after purchase of the product.
Notes regarding warranty maintenance
1
This Warranty will only be valid if the Warranty Certificate is
duly completed by Olympus or the dealer. Make sure that
your name, the name of the dealer, the serial number and the
year, month and date of purchase are all completed.
Since this Warranty Certificate will not be re-issued, keep it in
a safe place.
Any request for repair by a customer in same country where
the product was purchased shall be subject to the terms
of the warranty issued by the Olympus distributor in that
country. Where the local Olympus distributor does not issue a
separate warranty or where the customer is not in the country
where the product was purchased the terms of this worldwide
warranty shall apply.
d. Any defect or damage that occurs due to fire, earthquake,
flood damage, thunderbolt, other natural disasters,
environmental pollution and irregular voltage sources.
e. Any defect that occurs due to careless or improper
storage (such as keeping the product under conditions
of high temperature and humidity, near insect repellents
such as naphthalene or harmful drugs, etc.), improper
maintenance, etc.
f. Any defect that occurs due to exhausted batteries, etc.
g. Any defect that occurs due to sand, mud, etc. entering the
inside of the product casing.
h. When this Warranty Certificate is not returned with the
product.
i. When any alterations whatsoever are made to the
Warranty Certificate regarding the year, month and date of
purchase, the customer’s name, the dealer’s name, and
the serial number.
j. When proof of purchase is not presented with this
Warranty Certificate.
2
3
4
Where applicable, this Warranty is valid worldwide. The
Olympus authorized service stations listed in this Warranty
will gladly honor it.
*
Please refer to the appended list for the authorized
international Olympus service network.
Disclaimer of Warranty
Olympus makes no representations or warranties, either
expressed or implied, by or concerning any content if these
written materials or software, and in no event shall be liable
for any implied warranty of merchantability or fitness for any
particular purpose or for any consequential, incidental or
indirect damages (including but not limited to damages for loss
of business profits, business interruption and loss of business
information) arising from the use of inability to use these written
materials or software. Some states do not allow the exclusion or
limitation of liability for consequential or incidental damages, so
the above limitations may not apply to you.
4
5
This Warranty applies to the product only; the Warranty does
not apply to any other accessory equipment, such as the
case, strap, lens cap and batteries.
Olympus’ sole liability under this warranty shall be limited to
repairing or replacing the product and any liability for indirect
or consequential loss or damage of any kind incurred or
suffered by the customer due to a defect in the product, and
in particular any loss or damage caused to any film or lenses
or other equipment or accessories used with the product or
for any loss resulting from delay in repair, is excluded.
78
EN
Trademarks
• IBM is a registered trademark of International Business
Machines Corporation.
• Microsoft and Windows are registered trademarks of Microsoft
Corporation.
• Macintosh is a trademark of Apple Inc.
• The SDHC/SDXC logo is a trademark.
• Eye-Fi is a registered trademark of Eye-Fi, Inc.
• All other company and product names are registered
trademarks and/or trademarks of their respective owners.
• The standards for camera file systems referred to in this
manual are the “Design rule for Camera File system/DCF”
standards stipulated by the Japan Electronics and Information
Technology Industries Association (JEITA).
THIS PRODUCT IS LICENSED UNDER THE AVC
PATENT PORTFOLIO LICENSE FOR THE PERSONAL
AND NONCOMMERCIAL USE OF A CONSUMER TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC
STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE
AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NON-COMMERCIAL
ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION MAY BE
OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.
MPEGLA.COM
The software in this camera may include third party
software. Any third party software is subject to the
terms and conditions, imposed by the owners or
licensors of that software, under which software is
provided to you.
Those terms and other third party software notices,
if any, may be found in the software notice PDF file
stored within the accompanying CD-ROM or at
digicamera/download/notice/notice.cfm
Powered by ARCSOFT.
79
EN
SPECIFICATIONS
Camera
Model No.
SZ-10
SZ-20
Product type
Recording system
Still pictures
:
Digital camera (for shooting and displaying)
:
:
Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF))
Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge
Applicable
standards
3D still image
:
:
MP format
Sound with still
pictures
Wave format
Movie
:
:
MPEG-4AVC./H.264
Memory
Internal memory
SD/SDHC/SDXC/Eye-Fi card
No. of effective pixels
Image pickup device
Lens
:
:
:
14,000,000 pixels
16,000,000 pixels
1/2.33” CCD (primary color filter)
1/2.3” CMOS (primary color filter)
Olympus lens 5.0 to 90 mm,
f3.1 to 4.4
Olympus lens 4.2 to 52.5 mm,
f3.0 to 5.9
On 35 mm film
Photometric system
Shutter speed
:
:
:
Equivalent to 28 to 504 mm
Equivalent to 24 to 300 mm
Digital ESP metering, spot metering system
4 to 1/2000 sec.
4 to 1/2000 sec.
Shooting range
Normal
:
:
:
0.1 m (0.3 ft.) to (W),
1.6 m (5.2 ft.) to (T)
0.1 m (0.3 ft.) to (W),
0.9 m (3.0 ft.) to (T)
Macro mode
0.1 m (0.3 ft.) to (W),
1.6 m (5.2 ft.) to (T)
0.1 m (0.3 ft.) to (W),
0.9 m (3.0 ft.) to (T)
Super macro
mode
0.01 m (0.03 ft.) to (W only)
Monitor
:
:
3.0” TFT color LCD display, 460,000 dots
Connector
DC-IN jack, USB connector, A/V OUT jack (Multi-connector)/
HDMI micro connector (type D)
Automatic calendar
system
:
2000 up to 2099
80
EN
Model No.
SZ-10
SZ-20
Operating environment
Temperature
:
0 °C to 40 °C (32 °F to 104 °F) (operation)/
-20 °C to 60 °C (-4 °F to 140 °F) (storage)
Humidity
:
:
:
30 % to 90 % (operation)/10 % to 90 % (storage)
Power supply
One Olympus lithium ion battery (LI-50B) or separately sold AC adapter
Dimensions Width x
Height x Depth
105.9 mm x 67.3 mm x 37.9 mm
(4.2 x 2.6 x 1.5 in.)
102.4 mm x 64.0 mm x 30.4 mm
(4.0 x 2.5 x 1.2 in.)
(excluding protrusions)
Weight
:
215 g (7.6 oz.) (including battery and card) 186 g (6.6 oz.) (including battery and card)
Lithium ion battery (LI-50B)
Product type
Model No.
:
:
:
:
:
Lithium ion rechargeable battery
LI-50BA/LI-50BB
Standard voltage
Standard capacity
Battery life
DC 3.7 V
925 mAh
Approx. 300 full charges (varies on usage)
Operating environment
Temperature
Dimensions
:
:
:
0 °C to 40 °C (32 °F to 104 °F) (charging)
34.4 mm (W) x 40.0 mm (H) x 7.0 mm (D) (1.4 x 1.6 x 0.3 in.)
Approx. 20 g (0.7 oz)
Weight
81
EN
USB-ACC adaptter (F--2AC)
Model No.
:
:
:
F-2AC-1A/F-2AC-2A/F-2AC-1B/F-2AC-2B
AC 100 to 240 V (50/60 Hz)
DC 5 V, 500 mA
Power requirements
Output
Operating environment
Temperature
:
0 °C to 40 °C (32 °F to 104 °F) (operation)/
-20 °C to 60 °C (-4 °F to 140 °F) (storage)
Dimensions
Weight
:
:
50.0 mm (W) X 54.0 mm (H) X 22.0 mm (D) (2.0 X 2.1 X 0.9 in.)
Approx. 46.0 g (1.6 oz) (F-2AC-1A)/Approx. 42.0 g (1.5 oz) (F-2AC-2A)/
Approx. 44.0 g (1.6 oz) (F-2AC-1B)/Approx. 40.0 g (1.4 oz) (F-2AC-2B)
Design and specifications subject to change without notice.
HDMI, the HDMI Logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
82
EN
VR136501
|