|
Nokia Reaction Bluetooth Headset User Guide
Issue 1.0
3
Introduction
About your headset
With the Nokia Reaction Bluetooth Headset, you can make and receive calls hands-
free. You can pair with 4 compatible phones or other devices, and can connect to 2
at the same time.
The surface of this product is nickel-free.
Warning:
This product may contain small parts. Keep them out of the reach of small children.
Parts of the product are magnetic. Metallic materials may be attracted to the product.
Do not place credit cards or other magnetic storage media near the product, because
information stored on them may be erased.
Read this user guide carefully before using the product. Also, read the user guide for
the device that you connect to the product.
About Bluetooth connectivity
You can use Bluetooth to make a wireless connection to other compatible devices,
such as mobile phones.
Devices do not need to be in direct line-of-sight, but they must be within 10 meters
(33 feet) of each other. The connection may be affected by obstructions such as walls
or other electronic devices.
This device is compliant with Bluetooth Specification 3.0 supporting the following
profiles: hands-free (1.6), headset (1.2), advanced audio distribution (1.2), and audio/
4
video remote control (1.4) . Check with the manufacturers of other devices to
determine their compatibility with this device.
Get started
Keys and parts
1
2
3
4
5
6
7
8
9
Earloop (optional)
Call key
Micro-USB connector
Earpad
Earpiece
NFC area
Power switch
Microphone
Volume down
10 Battery indicator
11 Volume up
12 Menu key
Wear the headset
Put the headset to your ear so that the hole in the earpad is directly toward your ear
canal and the hoop of the earpad is diagonally toward the top of your head. Point the
headset toward your mouth.
5
Your headset comes with several different-sized earpads – select the one that fits
the best, and is the most comfortable for your ear.
Change the earplug
Pull the current earpad from the earpiece, then push the new earpad into place.
Tip: If you'd like the headset to be more firmly against your ear, attach the optional
earloop to the earpiece, then slip the earloop over your ear.
When you're not using your headset, keep it in the carrying clip – the headset switches
off automatically. You can attach the clip to your clothing.
6
Switch the headset on or off
Switch on
Slide the power switch toward the earpiece.
Tip: The headset goes into power save mode when you're not wearing it. When you
put the headset back to your ear, it reconnects to your phone.
Switch off
Slide the power switch away from the earpiece, or put the headset into the carrying
clip.
Use your headset for the first time
Voice prompts guide you through setting up your headset when you switch the
headset on for the first time.
1
2
3
Switch the headset on.
Put the headset to your ear.
Follow the voice prompts to pair the headset with your phone.
Tip: You can change the language of the voice prompts with the Nokia accessory
software updater app.
Charge the battery
The headset has been charged at the factory, but you may want to recharge it before
you switch the headset on for the first time.
7
Warning:
Use only chargers approved by Nokia for use with this particular model. The use of
any other types may invalidate any approval or warranty, and may be dangerous. Use
of unapproved chargers may present a risk of fire, explosion, or other hazard.
1
2
Put the headset in the charging adapter.
Connect the adapter to a USB port on your computer, or to a compatible charger.
The lights in the batteryindicator blink slowly when your headset is being charged.
When the indicator lights stop blinking, the battery is fully charged.
The fully charged battery has power for up to 6 hours of talk time. The standby time
is up to 12–15 days. When in the carrying clip, the standby time is up to 3 months.
When the battery charge is low, the frame around the battery indicator blinks.
Check the battery level
Make sure the headset is on, then swipe your finger over the battery indicator. The
three white indicator lights show the battery level. If the headset is in your ear, a voice
prompt tells you the remaining talk time.
Tip: You can charge your headset also without the charging adapter. Use a compatible
USB cable to connect the headset to your computer or a charger.
When you unplug a charger, hold and pull the plug, not the cord.
8
Pair the headset
Pair your headset with your phone
Before using the headset, you must pair and connect it to a compatible Bluetooth
device, such as your phone. You can't pair the headset with a phone during a call.
Follow these instructions when you are pairing your first device, or if you have
restored the factory settings.
1
2
On your phone, switch Bluetooth on.
Switch the headset on, then put the headset to your ear. You are guided with voice
prompts.
3
4
If your headset is not shown on your phone, search for new devices, then select
the headset.
If asked for a passcode on your phone, type in 0000.
Set your headset as a trusted device to make it connect to your phone automatically.
With some phones, you may need to make the connection separately after pairing.
Pair with a phone with NFC
If your phone supports Near Field Communication (NFC), it is easy to pair your
headset.
9
1
On your phone, make sure that NFC is on and the phone keys and screen are
unlocked.
2
3
Switch the headset on.
Tap the NFC area of the headset with the NFC area of the phone.
Set your headset as a trusted device to make it connect to your phone automatically.
Pair the headset with another phone
After pairing your headset with your phone, you can pair it with up to 3 other phones.
The headset can be connected to 2 phones at the same time, so you can make and
receive calls on, for example, your personal and your work phone at the same time.
1
2
3
On the phone you want to pair with, switch Bluetooth on.
Switch the headset on, then put it to your ear.
Press and hold the menu key, then follow the voice prompts.
As well as pairing with a phone, you can also switch ear detection and voice guidance
off, and restore factory settings.
Make calls
Make and receive calls
Make sure your headset is on, and that your headset is a trusted device in your phone
Bluetooth settings – so the headset connects to your phone automatically when
needed.
Most features can be handled with the call key
on your headset.
Make a call
Put the headset to your ear, then make a call in the normal way.
Answer a call
Put the headset to your ear.
10
If the headset is already in your ear, press
.
End a call
Press
.
Decline a call
Decline the call as you normally would on your phone.
If the headset is in your ear, press
twice.
Mute or unmute a call
Press the menu key on the headset.
Switch a call from your phone to your headset
Put the headset to your ear.
Switch a call from your headset to your phone
Take the headset from your ear.
When no call is in progress, you can redial the number you last called or use your voice
to make a call, if your phone supports these features with the headset.
Redial the last called number
Press
twice.
Use voice dialing
Press and hold
, then follow the instructions in the phone user guide.
Adjust the volume
Your headset listens to the background noise, and changes the volume automatically.
11
Manually turn the volume up
Tap the end of the headset closer to the earpiece.
Manually turn the volume down
Tap the dot in the middle of the headset.
Tip: To quickly change the volume, tap and hold instead of tapping.
Handle calls from two phones
If your headset is connected to 2 phones, you can handle calls from both phones at
the same time. You can control the incoming calls on your phones or on the headset.
End an ongoing call, then answer a call on another phone
Press
Decline a call on another phone without ending an ongoing call
Press twice.
Put an ongoing call on hold, then answer a call on another phone
Press and hold
Switch between active and held calls
Press and hold
End an ongoing call, then switch to a held call
Press
.
.
.
.
If you redial or use voice dialing, the call is made on the phone you last had an active
call on with the headset.
12
Update the software of your headset
1
2
On your computer, download and install the Nokia accessory software updater
Your headset came with a USB cable. Open the USB cover, connect the micro-
USB end of the cable to the headset, then connect the standard USB end to your
computer.
3
Open the updater app, then follow the instructions shown on your computer. Do
not unplug the USB cable during the software update.
Change the language of the voice guidance
Open the app used to update the software of your headset, then follow the
instructions shown on your computer. You do not need to update the software.
Setting
Switch the voice guidance or ear detection off
If you'd prefer to use your headset without the voice prompts or the feature that
detects when the headset is in your ear, you can switch them off.
1
2
3
4
Put the headset to your ear.
Press and hold the menu key on the headset.
When asked to switch the ear detection on or off, press the menu key.
When asked to switch the voice guidance on or off, press the menu key.
To listen to the voice prompts again, press and hold the menu key.
Restore factory settings
1
2
Switch the headset on, then put the headset to your ear.
Press and hold the menu key, then follow the voice prompts.
After restoring the factory settings, you need to pair the headset with your phones
and other devices again.
Support
When you want to learn more about how to use your device, or if you're unsure how
your device should work, read the user guide thoroughly.
If you have an issue, restore the original factory settings.
If your issue remains unsolved, contact Nokia for repair options.
13
Product and safety information
Battery and charger information
This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as
you may damage the device.
This device is intended for use when supplied with power from the following chargers: AC-16, AC-50, DC-20, and the charger
adapter AD-89 . The exact charger model number may vary depending on the type of plug. The plug variant is identified by
one of the following: E, X, AR, U, A, C, K, or B.
The battery can be charged and discharged hundreds of times, but it will eventually wear out.
Talk and standby times are estimates only. Actual times are affected by, for example, device settings, features being used,
battery condition, and temperature.
If the battery has not been used for a long time, to begin charging, you may need to connect the charger, then disconnect
and reconnect it.
If the battery is completely discharged, it may take several minutes before the charging indicator is displayed.
When your charger is not in use, unplug it from the electrical plug and the device. Do not leave a fully charged battery
connected to a charger, as overcharging may shorten the battery’s lifetime. If left unused, a fully charged battery will lose
its charge over time.
Always keep the battery between 15°C and 25°C (59°F and 77°F). Extreme temperatures reduce the capacity and lifetime
of the battery. A device with a hot or cold battery may not work temporarily.
Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Recycle when
possible. Do not dispose as household garbage.
Use the charger for its intended purpose only. Improper use or use of unapproved chargers may present a risk of fire,
explosion, or other hazard, and may invalidate any approval or warranty. If you believe the charger is damaged, take it to a
service center for inspection before continuing to use it. Never use a damaged charger. Only use the charger indoors.
Take care of your device
Handle your device, charger and accessories with care. The following suggestions help you protect your warranty coverage.
•
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode
electronic circuits. If your device gets wet, allow the device to dry.
•
•
Do not use or store the device in dusty or dirty areas. Moving parts and electronic components can be damaged.
Do not store the device in high temperatures. High temperatures can shorten the life of the device, damage the
battery, and warp or melt plastics.
•
Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form
inside the device and damage electronic circuits.
•
•
•
•
Do not attempt to open the device.
Unauthorized modifications may damage the device and violate regulations governing radio devices.
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and mechanics.
Only use a soft, clean, dry cloth to clean the surface of the device.
Recycle
Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way
you help prevent uncontrolled garbage disposal and promote the recycling of materials.
14
Copyright and other notices
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this BH-907 product is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/
© 2012 Nokia. All rights reserved.
Nokia, Nokia Connecting People, and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia
Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective
owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior
written permission of Nokia is prohibited. Nokia operates a policy of continuous development. Nokia reserves the right to
make changes and improvements to any of the products described in this document without prior notice.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Nokia is under license.
To the maximum extent permitted by applicable law, under no circumstances shall Nokia or any of its licensors be responsible
for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is." Except as required by applicable law, no warranties of any kind, either
express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular
purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise
this document or withdraw it at any time without prior notice.
The availability of some features may vary by region. Please contact your operator for more details.
The availability of products may vary by region. For more information, contact your Nokia dealer. This device may contain
commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion
contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
This device complies with part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Your device may cause TV or radio
interference (for example, when using a device in close proximity to receiving equipment). If you require assistance, contact
your local service facility.Any changes or modifications not expressly approved by Nokia could void the user's authority to
operate this equipment.
NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
/Issue 1.0 EN-US
|