®
T587
Blu-ray Disc™ Player
Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS
19 Damage Requiring Service - Unplug this product from the wall outlet
and refer servicing to quali!ed service personnel under the following
conditions:
FCC WARNING
Changes or modi!cations not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
INDUSTRY CANADA REQUIREMENT
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a
quali!ed technician to restore the product to its normal operation.
e) If the product has been dropped or damaged in any way.
f) when the product exhibits a distinct change in performance-this
indicates a need for service.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN
AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF UNINSULATED“DANGEROUS VOLTAGE”
WITHIN THE PRODUCT’S ENCLOSURE THAT MAYBE OF
SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.
20 Replacement Parts - When replacement parts are required, be
sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS
INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN
THE LITERATURE ACCOMPANYING THE APPLIANCE.
21 Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
22 Wall or Ceiling Mounting - The product should be mounted to a wall
or ceiling only as recommended by the manufacturer.
23 Heat - The product should be situated away from heat sources such as
radiators, heat registers, stoves or other products (including ampli!ers)
that produce heat.
ꢀ
ꢀ
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CAUTION
Changes or modi!cations to this equipment not expressly approved by
NAD Electronics for compliance could void the user’s authority to operate
this equipment.
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
CAUTION REGARDING PLACEMENT
To maintain proper ventilation, be sure to leave a space around the unit
(from the largest outer dimensions including projections) that is equal to or
greater than shown below.
CAUTION
This equipment employs a Laser System. To ensure proper use of this
product, please read this owner’s manual carefully and retain for future
reference. Should the unit require maintenance, contact an authorized
service location. Use of controls, adjustments or the performance of
procedures other than those speci!ed may result in exposure to laser
radiation. To prevent direct exposure to laser beam, do not try to open the
enclosure. Visible laser radiation when the enclosure is opened.
DO NOT STARE INTO BEAM.
Left and Right Panels: 10 cm
Rear Panel: 10 cm
Top Panel: 50 cm
FCC NOTICE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment o" and on, the user is encouraged to try
to correct the interference by one or more of the following measures
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit di"erent from
that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help.
3
IMPORTANT SAFETY INSTRUCTIONS
NOTES ON ENVIRONMENTAL PROTECTION
At the end of its useful life, this product must not be disposed
of with regular household waste but must be returned to a
collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user’s manual and
packaging, point this out.
The materials can be reused in accordance with their markings. Through
re-use, recycling of raw materials or other forms of recycling of old
products, you are making an important contribution to the protection of
our environment. Your local administrative o#ce can advise you of the
responsible waste disposal point.
INFORMATION ABOUT COLLECTION AND DISPOSAL OF
WASTE BATTERIES (DIRECTIVE 2006/66/EC OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL OF EUROPEAN UNION) (FOR
EUROPEAN CUSTOMERS ONLY)
Batteries bearing any of these symbols indicate
that they should be treated as“separate collection”
and not as municipal waste. It is encouraged that
necessary measures are implemented to maximize
the separate collection of waste batteries and
to minimize the disposal of batteries as mixed
municipal waste.
End-users are exhorted not to dispose waste
batteries as unsorted municipal waste. In order to
achieve a high level of recycling waste batteries, discard waste batteries
separately and properly through an accessible collection point in your
vicinity. For more information about collection and recycling of waste
batteries, please contact your local municipality, your waste disposal service
or the point of sale where you purchased the items.
By ensuring compliance and conformance to proper disposal of waste
batteries, potential hazardous e"ects on human health is prevented and
the negative impact of batteries and waste batteries on the environment
is minimized, thus contributing to the protection, preservation and quality
improvement of the environment.
NOTE: THE T 587 IS NOT AN AUTO VOLTAGE UNIT. CONNECT ONLY
TO THE PRESCRIBED AC OUTLET, I.E., 120V 60HZ OR 230V 50HZ.
RECORD YOUR MODEL NUMBER (NOW, WHILE YOU CAN SEE IT)
The model and serial number of your new T 587 are located on the back of
the cabinet. For your future convenience, we suggest that you record these
numbers here:
Model no: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial no.: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited
Copyright 2009, NAD Electronics International, a division of Lenbrook Industries Limited
4
INTRODUCTION
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . .2
USING THE T 587 ! FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
USB MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PLAYING AUDIO CD/MP3/WMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
VIEWING A PHOTO FILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DIVX PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ENJOYING BD$LIVE™ OR BONUSVIEW™ IN BD$VIDEO . . . . . . . . . . . . . . . 17
SCREENSAVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
USING THE T 587 " FUNCTION CONTROL . . . . . . . . . . . . . . . . . . . . . . . . .18
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
SUBTITLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ANGLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
RPT (REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
MARKER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
INTRODUCTION
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
UNPACKING AND SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
CHOOSING A LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
DISC LOADING AND PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
QUICK START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
REGION MANAGEMENT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PLAYABLE DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
ABOUT THE SYMBOL DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
BD$ROM DISC FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
BD$ROM DISC COMPATIBILITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
IDENTIFICATION OF CONTROLS
REFERENCE
FRONT PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
REAR PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
BR 1 REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
RESOLUTION SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
PLAYBACK OF UNPROTECTED MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PLAYBACK OF COPY PROTECTED MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
AREA CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
NOTES ON DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
HANDLING DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
STORING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
CLEANING DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
OPERATION
USING THE T 587 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
USING THE HOME MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
DISPLAY THE T 587 SETUP MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
NAVIGATING THE SETUP MENU OSD AND MAKING CHANGES. . . . . . 11
DISPLAY DISC OSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
DISPLAY SETUP MENU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
LANGUAGE SETUP MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
AUDIO SETUP MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
LOCK SETUP MENU (APPLICABLE TO BD AND DVD PLAYBACK ONLY)14
NETWORK SETUP MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
OTHERS SETUP MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
THANK YOU FOR CHOOSING NAD.
The T 587 brings NAD’s penchant for performance to the exciting new
Blu-ray Disc format. This Pro!le 2.0 Blu-ray Disc Player brims with the latest
features and o"ers for the !rst time a true High De!nition source for digital
Home Theater systems.
We encourage you to take a few minutes now to read right through this
manual. Investing a little time here at the outset might save you a good
deal of time later, and is by far the best way to ensure that you make the
most of your investment in the T 587.
As with all our products, NAD’s“Music First”design philosophy guided the
T 587’s design in such a way that it can con!dently promise you state-
of-the-art visual !delity and audiophile-quality music listening for years
to come. We have been careful to ensure that the T 587 is as musically
transparent, faithful to every video detail and spatially accurate as possible,
incorporating much of what we’ve learned from a quarter-century’s
experience designing audio, video and home-theater components.
One more thing: We urge you to register your T 587 ownership on the NAD
Worldwide Web site:
For warranty information contact your local distributor.
5
INTRODUCTION
GETTING STARTED
UNPACKING AND SETUP
WHAT’S IN THE BOX
Packed with your T 587 you will !nd:
ASSEMBLY OF RUBBER FOOT WITH PLASTIC FOOT
Step 1
Insert rubber foot
Squeeze to allow the
rubber foot to clamp under
the six flanges on the
plastic foot
•
•
•
•
•
An audio/video cable connector
The BR 1 remote control with 2 (two) AA batteries
A detachable AC power cord
HDMI cable (230V version only)
This owner’s manual
Plastic foot flange
SAVE THE PACKAGING
Please save the box and all of the packaging in which your T 587 arrived.
Should you move or otherwise need to transport your T 587, this is by far
the safest container in which to do so. We’ve seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to both
sides and behind), and that will provide a clear line of sight, within 23 feet/7
meters, between the T 587’s front panel and your primary listening/viewing
position. This will ensure reliable infrared remote control communications.
The T 587 generates a modest amount of heat, but nothing that should
trouble adjacent components. It is perfectly possible to stack the T 587 on
top of other components.
Step 2
Rubber foot inserted
DISC LOADING AND PLAYBACK
There are two di"erent disc sizes. Place the disc in the correct guide on the
disc tray. If the disc is out of the guide, it may damage the disc and cause
the T 587 to malfunction. “Check Disc”appears at the On-Screen Display
(OSD) (“DISC ERROR”at the VFD), if the disc is placed upside down (and it is
a single sided disc).
The following are important tips when loading a disc
•
•
•
Do not push the disc tray while it is moving. Doing so may cause the
T 587 to malfunction.
QUICK START
In case you simply cannot wait to experience the performance of your new
NAD T 587, we provide the following“Quick Start”instructions to get you
underway.
Do not push up the disc tray or put any objects other than discs on the
disc tray. Doing so may cause the T 587 to malfunction.
Keep your !ngers well clear of the disc tray as it is closing. Be especially
careful with children’s !ngers around the closing disc tray, as there is a
risk of personal injury.
Please make all the connections to your T 587 with the unit unplugged. It is
also advisable to power-down or unplug all associated components while
making or breaking any signal or AC power connections.
Press [ ], the disc tray is automatically closed. Playback of the !rst track
starts if a CD is loaded. For BD, DVD, USB or other disc media, playback
operation is accessible through their menu screen.
PLAY A BLU#RAY DISC
1
Using a compatible HDMI connector, connect the T 587’s HDMI OUT to
the corresponding HDMI input of your HDMI-compatible TV/monitor.
Connect the supplied AC cord to the T 587 AC mains input and then
plug into an AC outlet. Follow the same for your HDMI-compatible TV
as applicable. Switch ON your TV and set it to the HDMI input where
the T 587 is connected.
NOTE
2
Do not move the T 587 during playback. Doing so may damage the disc
and the T 587.
3
Press the [OPEN/CLOSE] button to switch ON the T 587 and at the same
time open the disc tray.
4
5
Load the Blu-ray disc in the disc tray.
Press the front panel [PLAY/PAUSE] button or [ ] button of BR 1
remote control to close the disc tray and start playback. You should hear
audio and see an image on the TV/monitor. If one or the other fails to
appear, check your TV/monitor’s input settings or the T 587 audio/video
connections.
Enjoy the movie but be sure to set aside time to read this manual
thoroughly to set up and con!gure your T 587 according to your
preference.
6
INTRODUCTION
GETTING STARTED
REGION MANAGEMENT INFORMATION
HIGH#DEFINITION PLAYBACK
The T 587 is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc or Blu-ray disc. If
the Region or BD code described on the disc does not correspond to the
Region or BD code shown on the T 587 rear panel, the T 587 cannot play
that disc. The disc tray automatically opens after the OSD brie'y displays
“Check Regional Code”when an incompatible Region or BD disc is loaded.
To view high-de!nition contents from BD-ROM discs, an HDTV is required.
Some discs may require HDMI OUT for viewing of high-de!nition contents.
Ability to view high-de!nition contents in BD-ROM discs maybe limited
depending on the resolution of your TV.
GRAPHIC PLANES
Two individual full HD resolution (1920x1080) graphic planes (layers) are
available on top of the HD video layer. One plane is assigned to video-
related, frame accurate graphics (like subtitles), and the other plane is
assigned to interactive graphic elements, such as buttons or menus. For
both planes, various wipes, fades and scroll e"ects may be available.
PLAYABLE DISCS
The T 587 has exceptional playability. It has support for the following disc
formats
•
Blu-ray Disc (BD), BD-R/RE discs that contain audio titles, DivX, MP3,
WMA or Photo !les.
•
•
DVD-Video, DVD R, DVD RW.
Audio CD, CD-R/-RW discs that contain audio titles, DivX, MP3, WMA or
Photo !les.
MENU SOUND
When you highlight or select a menu option, sound can be heard such as
button clicks or a voice-over explaining the highlighted menu choice.
•
Advanced Video Codec High De!nition (AVCHD) format discs.
MULTI#PAGE/POP#UP MENUS
ADVANCED VIDEO CODEC HIGH DEFINITION (AVCHD)
AVCHD video format is recorded using the MPEG-4 AVC/H.264 video
compression codec. It is a high de!nition digital video camera format
used to record SD (standard de!nition) or HD (high de!nition) signals. The
MPEG-4 AVC/H.264 format enables a HD video signal shot on a digital video
camera recorder to be recorded on DVDs in the same way as that of SD
television signal.
With DVD-Video, playback is interrupted each time a new menu screen
is accessed. Due to BD-ROM disc’s ability to preload data from the disc
without interrupting playback, a menu can consist of several pages. You can
browse through the menu pages or select di"erent menu paths, while the
audio and video remain playing in the background.
INTERACTIVITY
Certain BD-ROM Discs may contain animated menus and/or trivia games.
“AVCHD”and the“AVCHD”logo are trademarks of Matsushita Electric
Industrial Co., Ltd. and Sony Corporation.
USER BROWSABLE SLIDESHOWS
With BD-ROM Discs, you can browse through various still pictures while the
audio remains playing
NOTES
•
You cannot playback discs other than those listed above. To do so may
render the T 587 permanently inoperable.
SUBTITLES
•
•
An AVCHD formatted disc will not play if it is not correctly !nalized.
Depending on the recording condition, some AVCHD format discs may
not play.
Depending on what is contained on the BD-ROM disc, you may be able to
select di"erent font styles, sizes and colors for some subtitles. Subtitles may
also be animated, scrolled or faded in and out.
ABOUT THE SYMBOL DISPLAY
”may appear on your TV display during operation. This indicates that
the function you entered or try to execute is not available on that speci!c
BD#J INTERACTIVE CAPABILITY
“
The BD-ROM format supports Java for interactive functions. “BD-J”o"er
content providers almost unlimited functionality when creating interactive
BD-ROM titles.
disc or !le.
BD'ROM DISC FEATURES
BD'ROM DISC COMPATIBILITY
BD-ROM (Blu-ray Disc Read-Only Memory) is a commercially produced disc
and available in the same capacities as that of regular Blu-ray discs. Other
than conventional movie and video contents, BD-ROM has enhanced
features such as interactive content, menu operations, pop-up menus,
subtitle selection, slideshow and other features.
The T 587 supports BD-ROM Pro!le 2. Aside from the BONUSVIEW function,
the T 587 supports BD-Live (BD-ROM version 2 Pro!le 2) discs that allow
usage of interactive functions when the T 587 is connected to the internet.
The T 587 is also compatible with discs supporting BONUSVIEW (BD-ROM
version 2 Pro!le 1 version 1.1/Final Standard Pro!le) that enables Virtual
packages or Picture-in-Picture functions.
BD-ROM Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single
sided disc - about 5 to 10 times the capacity of a DVD. BD-ROM Discs also
support the highest quality HD video available in the industry (up to 1920 x
1080) - large capacity means no compromise on video quality. Furthermore,
a BD-ROM disc has the same familiar size and look as DVD.
NOTES
•
•
•
Viewing high-de!nition content and up-converting standard DVD
content may require an HDMI-capable input or HDCP-capable DVI input
on your display device.
Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio are
supported with maximum 7.1 channels when HDMI OUT is the selected
audio output port.
You can use the USB "ash drive that is used to store some disc related
information, including downloaded on-line content. The disc you are
using will control how long this information is retained.
The following BD-ROM disc features are disc dependent and will vary.
Appearance and navigation of features will also vary from disc to disc.
Some features may not be available on some discs.
VIDEO HIGHLIGHTS
The BD-ROM format for movie distribution supports three highly advanced
video codecs, includingMPEG-2, MPEG4 AVC (H.264), and SMPTE VC1. The
1920 x 1080 HD and 1280 x 720 HD video resolutions are also available.
7
IDENTIFICATION OF CONTROLS
FRONT PANEL
1
2
3
4
5
6
7
8
9
10
1
STANDBY: Press this button to switch ON the T 587. The display window
will illuminate. If there is disc loaded, the display window will show the
playback time status of the disc. If there is no disc loaded, the VFD will
brie'y show“NO DISC”and thereafter show the default display“HOME”.
7
8
STOP: Except for BD playback, pressing this button will stop and at
the same time pause playback of the disc. Press [PLAY/PAUSE] button
to resume play from the spot it was stopped. For BD playback, pressing
the [STOP] button will fully stop the playback and will return you to the
TITLE or MENU option of the disc.
Pressing the [ ] button of the BR 1 will switch ON the T 587 from
standby mode and at the same time open the disc tray. The T 587
can also be switched ON by pressing the [ON] or [ ] buttons of the
remote control. Pressing the standby switch again turns the unit back to
standby mode. Unplug the AC power cord from the AC wall socket to
completely shut down the T 587.
USB INPUT: Connect an external USB device into this input. Refer also
to the“USB MODE”section of“USING THE T 587 – FEATURES”under the
“OPERATION”main heading.
9
HOME: Press to access all the media for playback and setup of the
T 587. Refer also to the“USING THE HOME MENU”section of“USING THE
T 587 – FEATURES”under the“OPERATION”main heading.
2
DISC TRAY: With the DISC TRAY open, insert a Blu-ray disc (BD), DVD,
CD or other compatible media disc face down onto the tray.
10 [
] , [
], ENTER: Press [
] to skip forward or [
]
“Check Disc”appears at the On-Screen Display (OSD) (“DISC ERROR”at
the VFD), if the disc is placed upside down (and it is a single sided disc).
The disc tray will then automatically open.
to skip backward a track, !le or chapter.
Press [
] to scan fast-forward or fast-reverse during playback.
Each time the button is pressed, the speed increases until the maximum
level is reached. The scanning speed is indicated by trailing icons or
as shown in the OSD and may vary by disc type. The speed will be
retained even after the button is released; press [PLAY/PAUSE] to resume
normal playback.
3
4
VACUUM FLUORESCENT DISPLAY (VFD): If there is disc loaded, the
display window will show the playback time status of the disc. If there is
no disc inside, the display window will show“HOME”.
REMOTE SENSOR: Point the BR 1 at the remote sensor and press the
buttons. Do not expose the remote sensor of the BR 1 to a strong light
source such as direct sunlight or illumination. If you do so, you may not
be able to operate T 587 with the remote control.
The front panel [
respectively simulate the same functions of the [
] , [
] and ENTER buttons
] and ENTER
buttons of the BR 1 remote control under the following conditions or
options only
Distance: About 23 ft (7 m) from the front of the remote sensor
Angle: About 30° in each direction of the front of the remote sensor
•
•
Navigating through the HOME menu and SETUP menu.
Select through DivX or PHOTO !les as contained in a disc.
5
6
OPEN/CLOSE: Press this button to open and close the disc tray.
Outside of the above conditions, the [
buttons normally function as SKIP and SCAN modes.
] and [
]
PLAY/PAUSE: This dual-function button alternates between starting
and stopping playback. Press this button to toggle between Play and
Pause of a BD, DVD, CD or other compatible media disc. Press to start
play or resume play after Pause. If the disc tray is open, press this button
to automatically close the tray and start playback if a CD disc is loaded.
NOTE
Not all media support maximum speeds for scanning.
During playback, press this button to stop playback temporarily,
keeping the optical pickup at its current position on the disc. To resume
playback at the exact point where it stopped, press [PLAY/PAUSE] again.
8
IDENTIFICATION OF CONTROLS
REAR PANEL
1
2
3
4
5
6
7
8
ATTENTION!
Please make sure that the T 587 is powered o# or unplugged before making any connections. It is also advisable to power down or unplug all associated
components while making or breaking any signal or AC power connections.
1
2
AC MAINS INPUT: The T 587 comes supplied with a separate AC Mains
cable. Before connecting the cable to a live wall socket, ensure !rst
that it is !rmly connected to the T 587’s AC Mains input socket. Always
disconnect the AC Mains cable plug from the live wall socket !rst,
before disconnecting the cable from the T 587’s Mains input socket.
IMPORTANT NOTICE
If your HDMI equipped TV is not capable of decoding DTS or Dolby
Digital Bitstream, set the T 587’s HDMI or SPDIF setting at the “Audio
Setup Menu” to “PCM Stereo”. There may be a rushing noise heard if your
TV is not capable of decoding the DTS (or Dolby Digital) Bitstream; most
TVs do not have this capability.
COMPONENT VIDEO OUT: Connect to the corresponding component
video input of a compatible equipment like a monitor/television,
projector, A/V receiver or processor. Be sure to observe consistency in
connecting the appropriate Y, Cb/Pb, Cr/Pr jacks to the corresponding
sources/inputs. Do not rely purely on the color coding of the jacks,
which may not always be consistent among brands.
7
LOCAL AREA NETWORK (LAN) PORT: Using a commercially available
straight LAN cable (Category 5/CAT5 or better with RJ45 connector),
connect this LAN port to the corresponding port of your modem
or router. By connecting the T 587 to broadband internet, you can
playback a disc that o"ers BD-Live function. Refer also to the“NETWORK
SETUP MENU”section of“USING THE T 587”under the“OPERATION”main
heading.
3
4
5
VIDEO OUT: Connect to the corresponding composite video input of
a compatible monitor/television, projector, A/V receiver or processor
using quality dual-RCA cable designed for video signals.
NOTES
•
NAD is not responsible for any malfunction of the T 587 and/or the
AUDIO OUT: This analog audio output can be connected to the
corresponding analog audio input of a compatible equipment like an
ampli!er, receiver, TV or stereo system.
internet connection due to communication errors or malfunctions
associated with your broadband internet connection or other connected
equipment. Contact your Internet Service Provider (ISP) for assistance or
the service bureau of your other equipment.
DIGITAL OUT (COAXIAL, OPTICAL): The digital playback audio
output signal is available at these ports. Connect the optical or coaxial
digital OUT ports to the corresponding S/PDIF digital input of an
ampli!er, receiver, computer soundcard or other digital processors.
•
•
Contact your ISP for policies, charges, content restrictions, service
limitations, bandwidth, repair and other related issues pertinent to
internet connectivity.
Some disc related material available through internet may not be
compatible with the T 587. Contact the producer of the disc for questions
about such content availability or compatibility.
6
HDMI OUT: Using a HDMI cable (supplied only for 230V version model),
connect the HDMI OUT jack to the corresponding HDMI input jack of a
compatible equipment like a HDTV, a projector or an A/V Receiver.
8
IR IN: This input is connected to the output of an IR (infrared) repeater
(Xantech or similar) or the IR output of another component to allow
control of the T 587 from a remote location. Most NAD products with IR
OUT are fully compatible with the T 587.
Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio are
supported with maximum 7.1 channels when HDMI OUT is the selected
audio output port. Make sure to connect to an ampli!er or receiver with
a built-in (Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Digital
Plus, DTS-HD Master Audio and other applicable formats) decoder to
playback applicable multichannel audio formats.
WARNING
Before connecting and disconnecting any HDMI cables, both the T 587
and the ancillary source must be powered OFF and unplugged from the
AC outlet. Failure to observe this practice may cause permanent damage
to all equipment connected via HDMI sockets.
9
IDENTIFICATION OF CONTROLS
BR 1 REMOTE CONTROL
1
2
3
ON: Switch T 587 ON.
7
TITLE/POP-UP: Display DVD title menu or
BD-ROM pop menu, if available.
MENU: Access menu on a DVD disc, if
available.
OFF: Switch T 587 OFF.
1
3
2
4
AUDIO: Select an audio language.
SUBTITLE: Select a subtitle language
ANGLE: Select a DVD camera angle if
available.
8
9
: Select an item in a menu.
ENTER: Acknowledge menu selection.
ZOOM: Enlarge video image.
DISP: Access on-screen display.
RTN: Exit from a menu window.
4
5
0-9 number buttons: Select numbered
items in a menu.
10 : Opens and closes the disc tray.
: Stop playback.
5
7
RPT: Repeat track, chapter, title, !le, folder,
all.
MARKER: Mark desired track or !le number
for selective playback.
: Pause playback temporarily.
: Go to beginning of current/
previous track, !le or chapter; go to next
track/!le/chapter.
6
8
: Start playback.
6
SCAN
: Fast reverse or forward
search.
11 A,B,C,D : Navigate or select BD-ROM menu,
if applicable; Page up/down PHOTO and
MUSIC menu list.
RES: Set output resolution of HDMI and
Component Video output.
HOME: Display or exit HOME menu.
PIP VIDEO: Switches ON/OFF secondary
video (Picture-in-Picture) (BD-ROM only).
PIP AUDIO: Switches ON/OFF secondary
audio (BD-ROM only).
9
10
11
10
OPERATION
USING THE T 587
You may operate the T 587 from its front panel or via the BR 1 remote
control. Since the remote control will be the primary controller for most
cases, we will focus on remote-controlled operations. Be sure also to read
the section, “IDENTIFICATION OF CONTROLS - FRONT PANEL”.
DISPLAY SETUP MENU
USING THE HOME MENU
From the Home Menu screen, you can access the Setup menu as well as
select desired media for playback. If the Home Menu does not appear,
check your applicable video connections.
1
Press [HOME] and the Home Menu appears.
TV ASPECT RATIO
Set TV ASPECT RATIO to select a picture size matching the aspect ratio of
your TV/Monitor.
Select“4:3 Letter Box”or“4:3 Pan Scan”when a standard 4:3 TV is connected.
4:3 Letter Box: Displays a wide picture with bands on the upper and
lower portions of the screen.
4:3 Pan Scan: Automatically displays the wide picture on the entire
screen and cuts o" the portions that do not !t.
2
3
Use [
] keys to select among the following menu options - Movie,
Photo, Music or Setup. If there is no disc loaded, only“Setup”menu is
accessible from these Home Menu options.
Press [ENTER] to select menu option.
Select“16:9 original”or“16:9 Wide”when a 16:9 wide TV is connected.
16:9 Original: The 4:3 picture is displayed with an original 4:3 aspect
ration, with black bars appearing at the left and right sides.
16:9 Wide: The 4:3 pictures is adjusted horizontally (in a linear
proportion) to !ll the entire screen.
DISPLAY THE T 587 SETUP MENU
The Setup Menu allows one to customize the operation of the T 587. If the
factory defaults do not suit your taste, you will need to use the setup menu
to con!gure the T 587 yourself.
NOTE
“4:3 Letter Box” or “4:3 Pan Scan” are not selectable when the resolution
is set to higher than 480i/480p (576i/576p).
Press the BR 1’s [HOME] button and then select“Setup”for the Setup Menu
OSD to appear. With the use of the BR 1’s navigation buttons, you may
select various menus.
RESOLUTION
The T 587 provides several video output resolutions for the HDMI OUT
and COMPONENT VIDEO OUT jacks. Resolution can be changed via the
“Resolution”option in the DISPLAY SETUP menu or by toggling the [RES]
button of the BR 1 remote control. The T 587 must be at STOP mode when
BR 1’s [RES] button is used to change the RESOLUTION setting.
NAVIGATING THE SETUP MENU OSD AND MAKING CHANGES
To navigate through the Setup Menu OSD options, please do the following
using the BR 1 remote control:
1
2
3
Use [
Press [
Use [
item.
] keys to move up or down the menu selections.
] to move backward or forward a menu window.
] keys to select through the options of a particular menu
The following resolutions are selectable or available
Auto: If the HDMI OUT jack is connected to a TV that provides display
information, the T 587 automatically selects the resolution best suited
to the connected TV. If COMPONENT VIDEO OUT is the selected video
output media, the resolution changes to 1080i – the default resolution
for Component Video OUT.
4
5
Press [ENTER] to select a desired setting/selection.
Press [RTN] to exit the Setup menu.
DISPLAY DISC OSD
You can display the general disc playback status on the TV screen. Some
1080p: Outputs 1080 lines of progressive video (applicable only for
HDMI connection).
items can be changed using the menu. To use the on-screen display
1080i: Outputs 1080 lines of interlaced video.
1
2
3
Press the BR 1’s [DISP] during playback.
720p: Outputs 720 lines of progressive video.
480p/576p: Outputs 480/576 lines progressive video.
480i/576i: Outputs 480/576 lines of interlaced video.
Press [
] to select an item. The selected item is highlighted.
Key-in the desired the number button, press [
applicable.
] or [ENTER] as
Available resolution varies according to connection and media format
NOTES
•
The display feature may not be available for all disc media and is media
dependent.
•
Display disc OSD does not apply to audio only discs like CD and MP3/
WMA/PHOTO !les as they are already presented in their respective menu
screens.
•
If no button is pressed for about 5 seconds, the on-screen display
disappears.
11
OPERATION
USING THE T 587
HDMI OUT CONNECTION
COMPONENT VIDEO OUT CONNECTION
•
For the 480i/576i resolution setting, the output resolution of HDMI OUT
will change to 480p/576p.
If you select a resolution manually and then connect the HDMI
jack to TV and your TV does not accept it, the resolution setting will
automatically be set to“Auto”.
The 1080p video output frame rate may be automatically set to either
24Hz or 60Hz depending upon the capability and preference of the
connected TV and based on the native video frame rate of the BD-ROM
disc’s contents.
If you select a resolution that is not compatible with your TV, a warning
message as shown below will appear.
•
For the 1080p resolution setting with unprotected media, the
COMPONENT VIDEO OUT resolution will change to 1080i.
When a protected media is loaded for playback, 720p, 1080i or 1080p
resolution settings of COMPONENT VIDEO OUT will change to either
480i/576i or 480p/576p (depends upon the connectivity of a HDMI
cable - plugged-in or unplugged).
•
•
•
•
•
BD or DVD could prevent up-scaling on analog output.
VIDEO OUT CONNECTION
• The resolution of the VIDEO OUT jack is !xed to 480i/576i.
NOTES
•
Depending on your display, some of the resolution settings may result
to abnormal picture or the picture disappearing altogether. When this
happens, press [HOME] key and then toggle [RES] repeatedly until the
picture reappears.
•
•
The T 587 supports simultaneous output of all video out jacks. The
resolution of the HDMI output will not be the same as the resolution on
the Component Video output.
For a list of applicable resolution settings with respect to video output
port and type of media, please refer to “RESOLUTION SETTINGS” under
the “REFERENCE” main heading.
1080P DISPLAY MODE
Movies shot with !lm camera consist of 24 frames per second. Since
conventional televisions display frames either at 1/60 or 1/50 second
intervals, the 24 frames do not appear at an even pace. The“24Hz”setting of
the T 587’s“1080p Display Mode”option enables the faithful reproduction
of such !lm-based materials, displaying each frame at 1/24 second intervals.
24Hz: Using an HDMI-equipped display compatible with 1080/24p
input, set“1080p Display Mode”to“24Hz”for smooth presentation of
!lm-based materials.
60Hz: If“24Hz”is selected and some picture disturbance is experienced
when the video switches between video and !lm material, set“1080p
Display Mode”to“60Hz”instead.
NOTE
If your TV is not compatible with 1080/24p, the actual frame frequency
of the video output will be 60Hz even though the “1080p Display Mode”
is set to “24Hz”.
After resolution change, if you cannot see the screen, please wait for about
20 seconds and the resolution will automatically revert back to the previous
resolution or a message screen as below may appear
HDMI COLOR SETTING
Set the type of video output from HDMI OUT jack. Select the setting that
matches your display device.
YCbCr: Select when connecting to an HDMI display device.
RGB: Select when connecting to a display device that supports RGB
output.
Select“Yes”for the current resolution setting (the VFD will show the
current resolution setting) to be applied. “Current”resolution setting is the
suggested new resolution setting.
Select“No”to seek for the next applicable resolution setting. The above
“Warning”screens will interchangeably be displayed until you select“Yes”to
a suggested resolution setting.
12
OPERATION
USING THE T 587
LANGUAGE SETUP MENU
SAMPLE FREQ. (FREQUENCY)
Set the sampling frequency of the audio signal.
48KHz: If your receiver or ampli!er is not capable of handling 96 kHz
and 192 kHz signals, select 48 kHz. When this choice is made, this unit
automatically converts any 96 kHz and 192 kHz signals to 48 kHz so your
system can decode them.
96KHz: If your receiver or ampli!er is not capable of handling 192 kHz
signals, select 96 kHz. When this choice is made, this unit automatically
converts any 192 kHz signal to 96 kHz so your system can decode them.
192KHz: If your receiver or ampli!er is capable of handling 192 kHz
signals, select 192 kHz. When this choice is made, a 192 kHz signal
passes through without any further processing.
Check the documentation of your ampli!er to verify its capabilities.
DISPLAY MENU
DRC (DYNAMIC RANGE CONTROL)
Select a language for the SETUP menu and on-screen display.
You can select the e"ective dynamic range (subjective range from soft to
loud) for playback of Dolby Digital or Dolby Digital Plus soundtracks. It
is useful when you watch your favorite action movie without disturbing
others at night.
DISC MENU/AUDIO/SUBTITLE
Select the language you prefer for the audio track (disc audio), subtitles
and the disc menu. Depending on the media, only those Disc Audio, Disc
Subtitle and Disc Menu languages recorded on the media are available.
When a language is chosen, it will become the default setting unless the
media overrides the settings.
On: The“On”setting is for late-night sessions or other times when you
wish to retain maximum dialog intelligibility while minimizing overall
volume levels.
O$: To maintain full dynamic range, set to“O"”.
Original: Refers to the original language in which the disc was
recorded.
NOTE
Other: Select“Other”if the desired language is not on the list. Use [
highlight“Other”, press [ENTER] and then input the 4-digit language code using
the number keys of the remote control. If you enter the wrong language code,
complete entering the 4-digit numbers, press [ENTER] and then encode the
correct 4-digit numbers. See“LANGUAGE CODE LIST”under the main heading
“REFERENCE”for a list of applicable language codes.
] to
DRC setting can be changed only at STOP mode or when there is no disc
loaded.
O$: If you choose for the disc subtitle not to come up, select“O"”.
AUDIO SETUP MENU
Each DVD disc has a variety of audio output options. Set the T 587’s AUDIO
options according to the type of audio system you use.
HDMI/SPDIF (DIGITAL AUDIO OUTPUT)
Select the audio output format for HDMI OUT or DIGITAL AUDIO OUT port.
PCM Stereo: Select when connected to a two-channel digital stereo
ampli!er.
PCM Multi-Ch (HDMI only): Select when connected to a device with
multi-channel decoder. This is applicable to HDMI OUT only.
DTS Re-Encode: Select when connected to a device with DTS
decoder.
Primary Pass-Thru: Select when connected to a device with LPCM,
Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD
decoder.
13
OPERATION
USING THE T 587
LOCK SETUP MENU (APPLICABLE TO BD AND DVD PLAYBACK ONLY)
RATING (120V VERSION ONLY)
The parental rating feature allows you to block access to scenes greater
than the rating you set up, thereby preventing your children from viewing
material you believe is unsuitable. To activate“Rating”, please be guided by
the following:
1
While at“Rating”line menu, press [ ]. A“Password”prompt will come
up in the menu screen.
2
3
Input the password you have setup.
Upon entering the password, you can now set the parental rating level
you prefer. Use [
] to step through the rating levels.
4
Press [ENTER] to con!rm your rating selection.
RATING 1#8
Rating“1”has the most restrictions and Rating“8”is the least restrictive.
Some movies contain scenes that may not be suitable for children to view.
Many of these discs contain parental control information that applies to
the complete disc or to certain scenes on the disc. Movies and scenes are
rated depending on the country. Some discs o"er more suitable scenes as
an alternative.
UNLOCK
If you select“Unlock”, parental lock is not active and the disc plays in full.
NOTE
If you set a rating level for the player, all disc scenes with the same rating
level or lower are played. Higher rated scenes are not played unless an
alternate scene is available on the disc. The alternative must have a
lower rating. If no suitable alternative is found, playback stops. You must
enter the 4-digit password in order to play the disc.
PASSWORD
When you access Lock Setup Menu for the !rst time, it is advised that you
setup !rst your Password.
1
2
While at“Password”line menu, press [ ] to select“New”option.
Press [ENTER]. Input your desired 4-digit password code. Press [ENTER]
again.
Enter again the 4-digit password code for veri!cation.
Press [ENTER]. You have now setup your Parental Rating password.
Should you forget your password, you can reset it by using the following
steps.
1
2
3
Remove any disc loaded.
Select“Password”option.
Use the number button to enter“210499”. “PIN CLEAR”appears in the
VFD and the password is reset.
3
4
You can change the password for parental control. Enter your four-digit
password when prompted on the screen.
BD AGE
1
2
3
While at“Password”line menu, press [ ] to select“Change”option.
Press [ENTER].
Enter your old four-digit password using the numeric buttons (0-9).
Press [ENTER].
You will be prompted to enter your new password. Enter the new four-
digit password using the numeric buttons (0-9). Press [ENTER].
You will be prompted to verify your new password. Enter the new four-
digit password again.
Set an age limit for rated BD-ROM playback.
1
While at“BD Age”line menu, press [ ]. A“Password”prompt will come
up in the menu screen.
2
3
Input the password you have setup.
Upon entering the password, you can now set the age limit for BD
viewing.
4
5
6
255: All BD ROM can be played back.
0 - 254: Prohibits playback according to the ratings recorded on the BD
ROM.
Press [ENTER]. The new four-digit password is now valid.
4
Press [ENTER] to con!rm your BD Age selection.
AREA CODE
Enter the code of the country/area whose standards were used to rate your
BD or DVD. See“AREA CODE LIST”under the main heading“REFERENCE”for
a list of applicable area codes.
1
While at“Area Code”line menu, press [ ]. A“Password”prompt will
come up in the menu screen.
2
3
4
5
Input the password you have setup. Press [ENTER].
Select the !rst character using [
Select the second character using [
] buttons. Press ENTER.
] buttons.
Press ENTER to con!rm your area code selection.
14
OPERATION
USING THE T 587
NETWORK SETUP MENU
OTHERS SETUP MENU
The NETWORK settings are needed to use the BD Live feature. By
connecting the T 587 to the internet, special BD-ROM sites can be enabled
by some BD-ROM discs. Online contents can be downloaded and watched
if a BD-ROM site contains links to future movie trailers, bonus contents and
other related features.
SKIN
Change the background or wallpaper of the OSD. Select among Fantasy,
Dream, City and Passion. The default“Skin”is“Fantasy”which is actually the
NAD logo.
JAVA FONT SIZE (BD ONLY)
Ensure proper broadband connectivity when con!guring the following
NETWORK features.
You can adjust the default text size displayed for the BD-J contents during
BD-ROM playback. This setting is only valid when BD-J contents do not set
the size of text. Please select a font size bigger than 24 when the T 587 is
connected to an HDTV.
IP MODE
If there is a DHCP server on the local area network (LAN), the T 587 will
automatically be allocated an IP address.
INITIALIZE
Dynamic IP: Select if you’re using a broadband router or broadband
modem that has a DHCP (Dynamic Host Con!guration Protocol) server
function. The IP address will automatically be determined.
Static IP: Select if there is no DHCP server on the network and you
want to set the IP address manually. Scroll down to“IP Setting”below
for the con!guration of the applicable IP settings.
You can reset the player to its original factory settings or initialize the BD
contents of the connected USB device.
Factory Set: Select to restore the T 587 to its factory default settings
except the LOCK SETUP MENU settings.
BD Storage Clear: Delete the BD contents from the connected USB
device.
IP SETTING
For both of the above options, the con!rm message prompt appears to
This option is available only if“IP Mode”option is set to“Static IP”.
complete the selection. Use [
[ENTER].
] to select“Yes”or“No”and then press
1
2
3
Use the [
] buttons to select a !eld.
Enter a value by using the number buttons.
Press [ENTER] when“OK”is highlighted to !nish and exit the IP Setting
screen.
DIVX REGISTRATION CODE
DivX is the name of a revolutionary new video codec which is based on the
new MPEG-4 compression standard for video. You will be able to play DivX
discs using the T 587.
BD#LIVE CONNECTION
You can restrict Internet access when BD-Live functions are used.
Permitted: Internet access is permitted for all BD-Live contents.
Partially permitted: Internet access is permitted only for BD-Live
contents that have content owner certi!cates. Internet access and
AACS Online functions are prohibited for all BD-Live contents without
a certi!cate.
The Registration code details necessary for VOD (Video-On- Demand)
service can be shown by pressing [ ] or [ENTER] while at“DivX Reg. Code”
menu option.
Advanced Access Content System (AACS) is a standard for content
distribution and digital rights management, intended to restrict access
to and copying of the next generation of optical discs and DVDs. The
AACS standard has been adopted as the access restriction scheme for
Blu-ray Disc.
Prohibited: Internet access is prohibited for all BD-Live contents.
15
OPERATION
USING THE T 587 # FEATURES
USB MODE
The T 587 can play back MP3/WMA/PHOTO/DivX !les stored in external USB
(Universal Serial bus) devices. The following are the T 587’s capabilities with
respect to USB device playability.
•
•
•
•
•
Support only USB Flash Drive.
Support USB 1.1 and USB 2.0.
Support up to 4 partitions of the USB device.
Digital camera and mobile phone are not supported.
If a USB extension cable or USB HUB is used, the USB device may not be
recognized.
USB PLAYBACK
1
2
3
Connect the external USB device to the front panel’s USB input.
Press [HOME]. Select“Movie”, “Photo”or“Music”option. Press [ENTER].
If a disc is loaded and a USB device is inserted simultaneously, the menu
prompt for selecting a media will appear
Play: Start playback of the selected track or !le.
Select Play: Playback only the marked track(s) or !le(s). Use BR 1’s
[MARKER] for selecting the multiple !les or tracks.
Random: Start or stop random playback. Press [
] during random
playback to select another random track or !le. “Random”and“Select
Play”mode cannot be enabled simultaneously.
Unmark All: Unmark all marked tracks or !les.
Close: Exit menu options.
NOTES
•
•
Playback may start automatically if an Audio CD is loaded.
If you are in a !le list and want to return to the previous Folder list, use
the [
] buttons on the remote to highlight “UP Folder” and press
[ENTER].
•
At “MUSIC” menu, BR 1’s red or blue color button can be used to move to
the previous or next page.
IMPORTANT NOTICE
4
Select“USB”as the desired media and then press [ENTER].
•
•
Customers should note that permission is required in order to download
MP3/WMA !les and music from the Internet. NAD ELECTRONICS
INTERNATIONAL has no right to grant such permission. Permission
should always be sought from the copyright owner.
Maximum !les per disc/USB: less than 1999 (total number of !les and
folders).
For details of operations on applicable !le type, refer to the relevant
sections below about MP3/WMA/Photo/DivX playback.
PLAYING AUDIO CD/MP3/WMA
The T 587 can play Audio CD and MP3/WMA formatted recordings on CD-
R/RW, DVD R/RW,BD-R/RE discs or USB 'ash drive.
1
2
3
4
Load the applicable disc or connect USB containing !les. Select“Music”
from the“Home”menu.
Press [ENTER]. The“MUSIC”menu appears at the OSD. A list of folders,
tracks or !les is shown at the OSD.
Use the BR 1’s [
] keys to navigate through the folders, tracks or
!les.
Press [
] to select a folder, and press ENTER to see the folder
contents.
Press [
5
6
] to select a track or !le.
Press [ ] to start playback or press [ENTER] for more options - the drop
down playability menu appears.
16
OPERATION
USING THE T 587 # FEATURES
VIEWING A PHOTO FILE
The T 587 allows the playback or viewing of PHOTO !les.
DIVX PLAYBACK
The T 587 supports DivX playback.
1
2
Load the applicable disc or connect USB containing !les. Select“Photo”
from the“Home”menu. Press [ENTER].
The PHOTO menu appears on the TV screen. A thumbnail of the photos
loaded in the disc will be shown in the OSD.
1
2
3
Load the applicable disc or connect USB containing !les. Select“MOVIE”
from the“Home”menu.
Press [ENTER]. A list of DivX !les is shown in the OSD. Use [
select a !le.
] to
3
4
5
Press [
] to go over the photo !les.
Press [ENTER] to select a !le and start playback.
Press [ENTER] or [ ] to select a !le and start playback.
During photo playback, several selectable options are shown in the
NOTES
bottom portion of the photo. Use [
the following options.
Slide Show: Press [ENTER] button to start or pause the slide show.
Music: Press [ENTER] to play or pause the background music. This
option is available after the background music is selected using [Music
Select] option.
Rotate: Toggle [ENTER] to continually rotate the picture clockwise. This
option is not available during slide show.
Normal/Fast/Slow: Toggle [ENTER] to set the Slide Show speed.
Music Select: Select the background music during photo playback.
Press [ENTER] and the“Select the music album”submenu appears.
] to highlight and select any of
•
Available resolution size: 720 x 576 (W x H). · Maximum !les per disc/
USB: less than 1999 (total number of !les and folders).
On the MOVIE menu, use BR 1’s red or blue color button to move to the
previous or next page.
•
ENJOYING BD'LIVE™ OR BONUSVIEW™ IN BD'VIDEO
The T 587 supports picture-in-picture (PIP), secondary audio, Virtual packages
and other features for BD-Video supporting BONUSVIEW (BD-ROM version
2 Pro!le 1 version 1.1/ Final Standard Pro!le). In addition to the BONUSVIEW
function, BD-Video supporting BD-Live (BD-ROM version 2 Pro!le 2) allow more
functions like online games by connecting the T 587 to the internet.
Use [
] to select a media or folder containing music !les.
Press ENTER to con!rm your selection and start playback of selected
background music.
PLAYING SECONDARY VIDEO (PICTURE#IN#PICTURE)AND
SECONDARY AUDIO
Close: Press [ENTER] to exit the menu option.
Secondary video can be played from compatible discs that support picture-
in-picture function. Refer to your disc’s instructions for the playback method
of this feature.
NOTES
•
•
Playback may start automatically if an Audio CD is loaded.
If you are in a !le list and want to return to the previous Folder list, use
PIP VIDEO: Press to turn ON/OFF secondary video.
PIP AUDIO: Press to turn ON/OFF the audio of the secondary video. If
secondary video is turned OFF, secondary audio will not be available.
the [
] buttons on the remote to highlight “UP Folder” and press
[ENTER].
•
•
•
•
To go directly to any !le, enter the !le number using the numbered
buttons (0-9).
At “PHOTO” menu, BR 1’s red or blue color button can be used to move to
the previous or next page.
Recommended size: less than 3000 x 3000 x 24 bit/pixel or less than
3000 x 2500 x 32 bit/pixel.
Maximum !les per disc/USB: less than 1999 (total number of !les and
folders).
ENJOYING BD#LIVE DISCS
The T 587 supports BD-Live, a new BD-Video function that allows access
features like interactive functions when connected to the internet. The
usable functions and the operating method may vary with each disc so
make sure to refer to the disc’s instructions for proper access and playability.
The T 587 must be connected to the internet to use the BD-Live functions.
It may take up to several minutes to load and start enjoying BD-Live
contents. Additional contents like movie trailer, subtitles, BD-J and similar
features can be downloaded to a USB device. Make sure that the free space
in the USB device is more than 1GB.
IMPORTANT NOTICE
Ensure that a USB "ash drive is connected in the front USB port when
accessing BD-Live functions.
SCREENSAVER
The screensaver appears when you leave the T 587 in Stop mode or HOME
menu mode for about !ve minutes. The Screensaver will be continuously
displayed until the next command is executed.
17
OPERATION
USING THE T 587 % FUNCTION CONTROL
Depending on the media, the following basic function controls of the T 587
can be accessed directly using the BR 1 remote control.
ZOOM
AUDIO
Use [ZOOM] to enlarge the video image. Press [ZOOM] during playback or
still playback to activate the Zoom function.
The AUDIO button will allow one to switch the audio language or format
only if the media supports the AUDIO button feature.
Use [
] to select zoom mode (up to 16 steps). To resume normal
playback, press [ZOOM] repeatedly until“O"”.
Press [AUDIO] repeatedly to select desired audio language or format.
NOTE
Zoom may not work on some discs or titles.
SUBTITLE
RPT (REPEAT)
It is possible to change the subtitle language to a di"erent language from
the one selected at the initial settings. This operation works only with discs
on which multiple subtitle languages are recorded.
To repeat the playback of a particular track or chapter, press the T 587’s
[RPT] key once. Pressing the same [RPT] key a second time will repeat all
the tracks or title. Turn o" repeat mode by pressing [RPT] button a third
time.
1
Press [SUBTITLE] during playback. When no subtitles are recorded, “OFF”
will be displayed.
2
Press [SUBTITLE] repeatedly until the desired language is selected.
NOTE
When the desired language is not selected even after pressing the button
several times, it means that the language is not available on the disc.
REPEAT feature does not apply to PHOTO !les.
MARKER
To eliminate the On Screen Subtitles, press [SUBTITLE] repeatedly to select
“OFF”.
ANGLE
Use the [MARKER] button to selectively mark or check the track(s) or !le(s)
that you wish to playback. Choose“Select Play”from drop down playability
menu (see section above about“PLAYING AUDIO CD/MP3/WMA”) to
playback in chronological order the marked tracks or !les.
Some DVDs may contain scenes that have been shot simultaneously from a
number of di"erent angles. For these discs, the same scene can be viewed
from each of these di"erent angles using the [ANGLE] button. This function
only works for discs having scenes recorded at di"erent angles.
1
2
Press [ANGLE] during playback. Angle number will be displayed.
Press [ANGLE] repeatedly until the desired angle is selected.
18
REFERENCE
RESOLUTION SETTINGS
PLAYBACK OF UNPROTECTED MEDIA
VIDEO OUTPUT
COMPONENT VIDEO OUT
HDMI DISCONNECTED
RESOLUTION
HDMI OUT
VIDEO OUT
HDMI CONNECTED
480i/576i
480p/576i
720p
480i/576i
480p/576p
480p/576p
480p/576p
480i/576i
480p/576p
720p
480i/576i
480i/576i
480i/576i
480i/576i
480i/576i
480i/576i
720p
720p
1080i
1080i
1080i
1080i
1080p/24Hz mode
1080p/60Hz mode
1080p/24Hz mode
1080p/24Hz mode
480i/576i
480i/576i
1080i
1080i
PLAYBACK OF COPY PROTECTED MEDIA
VIDEO OUTPUT
COMPONENT VIDEO OUT
RESOLUTION
HDMI OUT
VIDEO OUT
HDMI CONNECTED
480i/576i
HDMI DISCONNECTED
480i/576i
480i/576i
480p/576p
480p/576p
480p/576p
480i/576i
480i/576i
480i/576i
480i/576i
480i/576i
480i/576i
480p/576i
480i/576i
480p/576p
720p
720p
480p/576p
1080i
1080i
480i/576i
480p/576p
1080p/24Hz mode
1080p/60Hz mode
1080p/24Hz mode
1080p/24Hz mode
480i/576i
480p/576p
480i/576i
480p/576p
19
REFERENCE
LANGUAGE CODE LIST
Use this list to input your desired language for the following settings: DISC AUDIO/DISC SUBTITLE/DISC MENU language.
Language
Abkhazian
Afar
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Language
Singhalese
Slovak
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Finnish
Lithuanian
Macedonian
Malagasy
Malay
Afrikaans
Albanian
Ameharic
Arabic
French
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Frisian
Galician
Georgian
German
Greek
Malayalam
Maltese
Armenian
Assamese
Aymara
Maori
Greenlandic
Guarani
Gujarati
Hausa
Marathi
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Tamil
Basque
Tatar
Bengali; Bangla
Bhutani
Hebrew
Hindi
Nepali
Telugu
Thai
Norwegian
Oriya
Bihari
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Tibetan
Tigrinya
Tonga
Breton
Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Pashto, Pushto
Persian
Turkish
Turkmen
Twi
Polish
Italian
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Ukrainian
Urdu
Chinese
Corsican
Croatian
Czech
Uzbek
Vietnamese
Volapük
Welsh
Samoan
Danish
Kirghiz
Sanskrit
Dutch
Korean
Scots Gaelic
Serbian
Wolof
English
Kurdish
Laothian
Latin
Xhosa
Esperanto
Estonian
Faroese
Serbo-Croatian
Shona
Yiddish
Yoruba
Zulu
Latvian, Lettish
Sindhi
20
REFERENCE
AREA CODE
Enter the appropriate code number for setting up the“Area Code”.
CODE Country CODE Country CODE Country
CODE Country
CODE Country
CODE Country
AF
AL
DZ
AS
AD
AO
AI
Afghanistan
Albania
TD
CL
CN
CX
CC
Chad
DE
GH
GI
GB
GR
GL
GD
GP
Germany
Ghana
LU
Luxembourg
PG
Papua New
Guinea
SJ
Svalbard and Jan
Mayen
Chile
MO Macau
MK
Algeria
China
Gibraltar
Macedonia
PY
PE
PH
PN
PL
PF
Paraguay
SZ
SE
CH
SY
TJ
TW
TZ
TH
TG
TK
TO
TT
Swaziland
Sweden
American Samoa
Andorra
Christmas Island
Cocos (Keeling)
Islands
Great Britain
Greece
MG Madagascar
MW Malawi
MY
MV
ML
MT
MH Marshall Islands
MQ Martinique
(French)
Peru
Philippines
Pitcairn Island
Poland
Switzerland
Syria
Angola
Greenland
Grenada
Malaysia
Maldives
Mali
Anguilla
CO
KM
CG
CK
CR
HR
CU
CY
CZ
DK
DJ
Colombia
Comoros
Congo
Tadjikistan
Taiwan
AQ
AG
Antarctica
Antigua and
Barbuda
Guadeloupe
(French)
Polynesia
Malta
(French)
Tanzania
Thailand
Cook Islands
Costa Rica
Croatia
GU
GT
GN
Guam (USA)
Guatemala
Guinea
PT
PR
QA
RE
RO
RU
Portugal
AR
Argentina
Puerto Rico
Qatar
Togo
AM Armenia
AW Aruba
Tokelau
Cuba
GW Guinea Bissau
GY
HT
HM Heard and
McDonald
MR
Mauritania
Reunion (French)
Romania
Tonga
AU
AT
AZ
BS
BH
BD
BB
BY
BE
BZ
BJ
Australia
Cyprus
Guyana
Haiti
MU Mauritius
YT
MX
FM
MD Moldavia
MC Monaco
MN Mongolia
MS Montserrat
MA Morocco
Trinidad and
Tobago
Austria
Czech Republic
Denmark
Djibouti
Mayotte
Mexico
Russian
Azerbaidjan
Bahamas
Bahrain
Federation
Rwanda
TN
TR
TM
TC
Tunisia
Micronesia
RW
GS
Turkey
DM Dominica
DO
Islands
S. Georgia & S.
Sandwich Isls.
Saint Helena
Saint Kitts &
Nevis Anguilla
Saint Lucia
Saint Pierre and
Miquelon
Saint Tome and
Principe
Turkmenistan
Turks and Caicos
Islands
Bangladesh
Barbados
Belarus
Dominican
Republic
East Timor
Ecuador
HN
HK
HU
IS
IN
ID
IR
IQ
IE
IL
Honduras
Hong Kong
Hungary
Iceland
India
SH
KN
TP
EC
EG
SV
GQ
TV
UG
UA
AE
Tuvalu
Belgium
Uganda
Belize
Egypt
MZ
Mozambique
LC
PM
Ukraine
Benin
El Salvador
Equatorial
Guinea
Indonesia
Iran
MM Myanmar
United Arab
Emirates
BM
BT
BO
BA
Bermuda
Bhutan
NA
NR
NP
NL
AN
Namibia
Iraq
Nauru
ST
UK
US
UY
United Kingdom
United States
Uruguay
Bolivia
ER
EE
ET
FK
FO
FJ
Eritrea
Ireland
Israel
Nepal
Bosnia-
Estonia
Netherlands
Netherlands
Antilles
VC
Saint Vincent &
Grenadines
Samoa
Herzegovina
Botswana
Bouvet Island
Brazil
Ethiopia
IT
CI
Italy
UM USA Minor
Outlying Islands
Uzbekistan
BW
BV
BR
IO
Falkland Islands
Faroe Islands
Fiji
Ivory Coast
Jamaica
Japan
WS
SM
SA
SN
SC
SL
SG
SK
SI
SB
SO
ZA
KR
ES
LK
SD
SR
JM
JP
JO
KZ
KE
KI
NC
New Caledonia
(French)
San Marino
Saudi Arabia
Senegal
UZ
VU
VA
VE
VN
VG
Vanuatu
British Indian
Ocean Territory
Brunei
FI
CS
Finland
Jordan
Kazakhstan
Kenya
NZ
NI
New Zealand
Nicaragua
Niger
Vatican City State
Venezuela
Vietnam
Former
Seychelles
Sierra Leone
Singapore
Slovak Republic
Slovenia
BN
Czechoslovakia
Former USSR
France
NE
NG
NU
NF
KP
MP
Darussalam
Bulgaria
SU
FR
FX
Kiribati
Nigeria
Virgin Islands
(British)
BG
BF
BI
KH
CM
CA
CV
KY
CF
KW Kuwait
Niue
Burkina Faso
Burundi
France
KG
LA
LV
LB
LS
LR
LY
LI
Kyrgyzstan
Norfolk Island
North Korea
Northern
Mariana Islands
Norway
VI
WF
Virgin Islands (USA)
Wallis and
Futuna Islands
Western Sahara
Yemen
(European
Territory)
French Guyana
French Southern
Territories
Gabon
Laos
Solomon Islands
Somalia
Cambodia6
Cameroon
Canada
Latvia Islands
Lebanon
Lesotho
Liberia
GF
TF
South Africa
South Korea
Spain
EH
YE
YU
ZR
ZM
ZW
NO
OM Oman
PK
PW
PA
Cape Verde
Cayman Islands
Central African
Republic
Yugoslavia
Zaire
GA
Libya
Pakistan
Palau
Sri Lanka
GM Gambia
GE Georgia
Liechtenstein
Lithuania
Sudan
Zambia
LT
Panama
Suriname
Zimbabwe
21
REFERENCE
TROUBLESHOOTING
CONDITION
POSSIBLE CAUSES
POSSIBLE SOLUTIONS
No power.
•
•
•
The power cord is disconnected.
•
•
•
Plug the power cord into the wall outlet
securely.
The power is on, but the T 587 does not
work.
No disc is inserted.
Insert a disc.
No picture.
No sound.
The TV is not set to receive video input signal
from the T 587
Select the appropriate video input mode on
the TV.
•
•
The video cable is not connected securely.
•
•
•
Connect the video cable securely.
Check TV capability.
Mismatched resolution setting between the
T 587 and the TV.
Set the Resolution according to your TV’s
capability.
•
The connected equipment is not capable of
detecting or decoding audio signal from the
T 587.
•
Connect the audio output of the T 587 to an
equipment with appropriate audio decoders.
•
•
•
•
•
•
The power of the equipment connected with
•
•
•
•
•
•
Turn on the equipment connected with the
audio cable.
the audio cable is turned o".
The AUDIO output settings are incorrect.
Check audio output settings as con!gured in
the Audio Setup menu.
The T 587 does not start playback.
BD-Live feature does not work.
An unplayable disc is inserted.
Insert a playable disc. (Check the disc type
and regional code.)
The rating level is set.
Cancel the rating function or change the
rating level.
External USB device is not connected.
Internet connection is not established.
Connect USB device to the front panel USB
port.
Ensure that the T 587 is connected to the
local area network and can access the
internet.
The remote control does not work
properly.
•
•
•
T 587 front panel is in very bright sunlight or
ambient light.
•
•
•
Reduce sunlight/room lighting.
IR transmitter window on remote or IR receiver
window is obstructed.
Check IR windows and ensure clear line-of-
sight from remote to T 587.
The remote control batteries are dead.
Replace the remote control batteries.
NOTES ON DISCS
HANDLING DISCS
Do not touch the playback side of the disc. Hold the disc by the edges so that
!ngerprints do not get on the surface. Never stick paper or tape on the disc.
CLEANING DISCS
Fingerprints and dust on the disc can cause poor picture quality and sound
distortion. Before playing, clean the disc with a clean cloth. Wipe the disc
from the center out.
STORING DISCS
After playing, store the disc in its case. Do not expose the disc to direct
sunlight or sources of heat and never leave it in a parked car exposed to
direct sunlight.
Do not use strong solvents such as alcohol, benzine, thinner, commercially
available cleaners, or anti-static spray intended for older vinyl records.
22
REFERENCE
SPECIFICATIONS
SYSTEM
Signal system
Auto/NTSC/PAL (230V version model)
NTSC (120V version model)
Semiconductor laser
2dB (Ref. 0dB 20 Hz – 20 kHz)
>100dB (A-WTD, analog OUT)
>95 dB
Laser
Frequency response
Signal-to-noise ratio
Dynamic range
Total Harmonic Distortion
LAN port
<0.008 %
Ethernet jack, 10 Base-T/100 Base-TX
OUTPUT
Output format
Video OUT: up to 480i/576i
Component video OUT: up to 1080i
HDMI OUT: up to 1080p
1Vp-p/75 ohms
Video out
S-Video (Y signal)
1Vp-p/75 ohms
S-Video (C signal)
0.3Vp-p/75 ohms
1Vp-p/75 ohms
0.7Vp-p/75 ohms
2.0 Vrms (Ref. 1 kHz, 0 dB)
1.3
Component (Y signal)
Component (Cb/Cr signal)
Audio output level
HDMI version
Digital out (coaxial)
Digital out (optical)
0.5Vp-p
3Vp-p
GENERAL
Power requirements
AC 120 V 60 Hz (120V version model)
AC 110V - 240V 50/60 Hz (230V version model)
Standby power
Unit Dimension (W x H x D)
Net weight
<0.7W
435 x 60 x 280 mm (Gross)*
3.5kg
5.1kg
Shipping weight
* - Gross dimensions include feet, extended buttons and rear panel terminals.
information about T 587.
Manufactured under license under U.S. Patent #: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending.
DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Advanced Digital Out are trademarks of DTS, Inc. © 1996-2009 DTS, Inc. All
Rights Reserved.
Manufactured under License from Dolby Laboratories. “Dolby”and the double-D symbol are trademarks of Dolby Laboratories.
DivX, DivX Certi!ed, and associated logos are trademarks of DivX, Inc. and are used under license.
HDMI, the HDMI logo and High-De!nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
“Blu-ray Disc”is a trademark.
“BD-LIVE”logo is a trademark of Blu-ray Disc Association.
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly
is prohibited.
23
©2009 NAD ELECTRONICS INTERNATIONAL
A DIVISION OF LENBROOK INDUSTRIES LIMITED
All rights reserved. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International
T 587 Manual Issue 1-01/09
|