motorola
BEFOREYO
H9
®
Before using this product, read the Important Safety and
Universal Bluetooth
Headset
Take a moment before you get started to fam
Handsfree Headset. Along with your headse
storage and on-the-go remote charging.
Earpiece
Volume
Eartip
Speaker
Buttons
Microphone
Call
Button
Indicator
Light
H9
Get connected in 4 quick steps.
OU BEGIN
CHARGE
1
1
Your Headset's Battery
d Legal Information pamphlet and follow its instructions.
Plug Motorola power supply into charger port
on portable charger base.The Charger
Battery indicator light (-) turns on.
miliarize yourself with your new H9 Bluetooth
t, a portable charger base is provided for both
Note: If using a Dual Charging Adapter (sold separately),
plug the “Phone side” of cable into the charger base.
Insert headset snugly
into portable charger
base.The Headset
Battery indicator light
(+) turns on.
2
When headset's battery
is fully charged (about 3
hours), the Headset
Battery indicator light
turns off.
When headset is fully charged, proceed to
step 2. Do not remove the headset from
the charger base until step 3.
Headset
Battery
Indicator
Charger
Plug
Charger
Battery
Indicator
3
Note: Once the headset is fully charged, the charger
base will continue to charge. When fully charged (about
6.5 hours), the Charger Battery indicator light turns off.
TEST AND USE
USING YOUR
PORTABLE CHARGER
BASE
4
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
The portable charger base provided with your
headset can be used to cordlessly recharge
your headset anywhere. Once charged, the
portable charger base provides power
on-the-go, extending your talk time by
constantly “topping off” your headset’s battery.
Place the headset in your ear. The eartip
should be inserted so that the headset feels
comfortable and forms a seal in the ear.
1
Note: See “Eartips and Your Headset” on the reverse
side of this guide for more information on using eartips
with your headset.
Using the included Motorola power supply, you
can charge both the portable charger base and
headset at the same time. The portable base
charger provides two indicator lights for
charging status. See “Indicator Lights” in the
reverse side of this guide for information on
these indicator lights.
On the phone, dial the number you want to
call and press SEND key on your phone.
2
3
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
Note: Using your PC’s USB port as a power source for
charging is not recommended.
TROUBLESHOOTING
USING YOUR H9
My headset will not enter pairing mode.
Make sure that any devices previously paired with
the headset are turned off. If the indicator light is
not steadily lit in blue, turn off both the other
device and headset, wait 10 seconds, then turn
headset back on. Wait for the indicator light to
become steadily lit in blue, indicating the headset
is now in pairing mode.
See
Features and
Functions Guide
on the reverse side
for information on
using your H9
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2). If
the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and pair
your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
TURNING ON AND OFF
Features and
To turn your headset on, press and hold
the Call button until the indicator light
flashes.
Functions Guide
H9
To turn your headset off, press and hold
the Call button until the indicator light
flashes rapidly and then turns off.
Bluetooth®
Handsfree Headset
To conserve battery power, store your
headset in the included charger base.
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
Call
Indicator
Button
Light
to complete initial setup
of your H9.
INSTALLING EARTIP
When installing an eartip, carefully place it onto
the tip of the earpiece speaker.
EARTIPS AND YOUR
HEADSET
Your H9 headset is supplied with multiple
eartips.The eartip is fitted onto the end of your
headset’s earpiece speaker, and placed into
your ear when using your headset.
1
Pull back largest flange on eartip.
2
Twist eartip onto earpiece starting at an
angle and pushing onto headset.
Flanged Tip
Your headset’s performance is greatly
dependent upon achieving a good seal in your
ear. Therefore, we recommend trying all the
supplied eartips with your headset.
To verify you are using the proper eartip, you
can leave yourself a voicemail and check for
optimal ear seal to ensure good performance.
3
Pull flange back to wearing position.
CHANGING VOLUME
WEARING HEADSET
BUTTON ORIENTATION
To wear your headset, insert the headset’s
earpiece speaker with installed eartip into your
ear.The eartip should form a comfortable seal
in your ear.
You can also change the orientation of the
volume buttons on your headset.
Turn the headset power off.
1
2
Press both the Call button and Volume
button you want to assign as the
"volume up" button until the indicator
light flashes twice.
Volume
Buttons
Call
Button
Indicator
Light
European Union Directives
Conformance Statement
MAKING CALLS
Function
Action
Hereby, Motorola declares that this
product is in compliance with:
Make a voice dial call
Tap the Call button
and speak the name
after the tone
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
End a call
Tap the Call button
Tap the Call button
• All other relevant EU Directives.
Receive a call
Reject a call
Press and hold the
Call button until you
hear a medium beep
Product
Approval
Number
Redial last call
Press and hold the
Call button until you
hear a medium beep
The above gives an example of a typical Product
Approval Number.
Answer a second
incoming call
Press and hold the
Call button until you
hear a medium beep
(places first call on
hold)
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
product Approval Number from your product’s label in
the “Search” bar on the web site.
Note:Your H9 supports both Handsfree and Headset Profiles.
Accessing call functions depends upon which profile your
phone supports. See your phone's user's guide for more
information.
MAKING CALLS CONTINUED
MAKING CALLS CONTINUED
Function
Action
Function
Action
Toggle between two
active calls
Press and hold
the Call button until
you hear a medium
beep
Disable or enable the
indicator light
Press and hold
both Volume
buttons until you
hear a low beep
Join a 3-way call
Press and hold
both Volume buttons
until you hear a
medium beep
AUDIO TONES
The audio tones provide information about your
headset's status.
Put an active call on
hold or resume a call
on hold
Press and hold the
Call button until you
hear a medium beep
AudioTone
Headset Status
Single high tone when
pressing Volume button
Volume at minimum
or maximum
Transfer a call from the
phone to the headset
Tap the Call button
Five rapid high tones
repeated every 20 sec.
Low battery
Transfer a call from the
headset to the phone
Press and hold
the Call button until
you hear a low beep
No audio indications;
deteriorating quality
Out of range
Ring tone
Incoming call
All calls ended
Mute or unmute a call
Tap both Volume
buttons
Single very high
tone
Note: Some features are phone/network dependent.
AUDIO TONES CONTINUED
INDICATOR LIGHTS
AudioTone
Headset Status
Indicator lights provide information about your
headset and charger base status.
Single high tone
Tapping Call button
or both Volume
buttons
Charger Base
Indicator
Status
Single medium tone
Single low tone
Pressing Call button
or both Volume
Charger Battery On
Charging
( - )
Flashing Battery low
Off Charging complete
Headset Battery On
buttons for 1-2 sec.
Pressing and holding
Call button or both
Volume buttons for
greater than 2 secs.
Charging
( + )
Off
Charging complete
Single high tone
Phone network not
available
Headset
repeated every 5 sec.
Indicator
Off
Status
Two ascending tones
Two descending tones
Four ascending tones
Mute enabled
Mute disabled
Power off
On (steady)
10 rapid flashes
Slow pulse
Quick flash
Pairing mode
Headset powering
on
Pairing successful
Connected (on a call)
Standby (not on call)
Four descending tones
Headset powering
off
Note: After 5 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.
|