Owner's Manual
Mobile DVD/CD Player
with 8.5" TFT Monitor
Model: MV850
For operational or technical assistance, after reading this manual,
Contents
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Basic Operation and Special Functions . . . . . . 9-11
Turn the Unit On. . . . . . . . . . . . . . . . . . . . . . . . . . 9
Loading a DVD/CD Disc . . . . . . . . . . . . . . . . . . . 9
Ejecting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Play Function . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
DVD Special Functions . . . . . . . . . . . . . . . . . 10-11
CD Special Functions. . . . . . . . . . . . . . . . . . . . . 11
MP3 Function . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setup Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Wiring Diagram. . . . . . . . . . . . . . . . . . . . . . . . 16-17
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Replacement Parts . . . . . . . . . . . . . . . . . . . . . 19-20
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Disc Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Screen and DVD/CD Functions . . . . . . . . . . . . . . 5-7
Location of Functions. . . . . . . . . . . . . . . . . . . . . . 5
Adjusting the Monitor. . . . . . . . . . . . . . . . . . . . . . 6
Inserting a DVD/CD . . . . . . . . . . . . . . . . . . . . . . . 6
Changing to an Auxiliary Input Source. . . . . . . . . 6
Screen’s Remote Control Sensor . . . . . . . . . . . . . 7
Screen’s Wireless Transmitter Module. . . . . . . . . 7
Screen’s Dome Lights . . . . . . . . . . . . . . . . . . . . . 7
Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Remote Control Functions . . . . . . . . . . . . . . . . 8-9
Safety Information
CAUTION:
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Magnadyne
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Magnadyne
Corporation and is intended for home and other limited
viewing uses only unless otherwise authorized by
Magnadyne Corporation. Reverse engineering or disas-
sembly is prohibited.
THIS MOBILE DVD PLAYER IS A CLASS I LASER PROD-
UCT. HOWEVER, THIS MOBILE DVD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE DVD PLAYER
CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COV-
ERS AND DO NOT REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
Region Management Information:
This Mobile DVD Player is designed and manufactured to
respond to the Region Management Information that is
recorded on a DVD disc. If the Region number described
on the DVD disc does not correspond to the Region num-
ber of this Mobile DVD Player, this Mobile DVD Player
cannot play this disc.
CAUTION:
FCC REGULATIONS STATE THAT ANY UNAUTHORIZED
CHANGES OR MODIFICATIONS TO THIS EQUIPMENT
MAY VOID THE USER’S AUTHORITY TO OPERATE IT.
WARNING:
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE.
• THIS DEVICE IS INTENDED FOR CONTINUOUS OPER-
ATION.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
AND ANNOYING INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
3
Disc Notes
Disc Formats Supported by this Player:
DVD-R/DVD-RAM
Discs which cannot be played with this player:
• DVD-ROM
• CDV
• CD-G
Disc Handling
• Dirt, dust, scratches and warping disc will cause
non operation.
• Do not place stickers on disc or scratch disc.
• Do not warp discs.
Preparing New Discs with Rough Spots
A new disc may have rough edges on its inside and
outside edges. If a disc with rough edges is used, the
proper setting will not be performed and the player will
not play the disc. Therefore, remove the rough edges
in advance by using a ball point pen or pencil as
shown. To do this, press the side of the pen or pencil
against the inside and outside edges of the disc.
• A disc should always be kept in its case when not
in use to prevent damage.
•
Do not place discs in the following places:
1. Direct sunlight.
2. Dirty, dusty and damp areas.
3. Near car heaters.
4. Car seats or dashboard.
Disc Cleaning
Use a dry soft cloth to wipe the surface. If the disc is
quite dirty, use a soft cloth slightly moist with isopropyl
(rubbing) alcohol. Never use solvents such as benzine,
thinner or conventional record cleaners as they may mar
the surface of the disc.
Note: A disc may become somewhat scratched
(although not enough to make it unusable) depending
on handling and conditions in the usage environment.
4
Screen and DVD/CD Functions
16
17
15
18
7
8
9
10 11 12 13 14
1
2
3
4
5
6
1. POWER Button: Press this button to turn the unit 9. NEXT Button: In DVD/CD mode, pressing this button
On/Off.
searches for the beginning of the next track or chapter.
10. AUDIO Button: Changes the audio soundtrack on
multi-audio soundtrack DVD disc.
11. PBC Button: Used for playback of video CDs.
2. MODE Button: Press this button to change the play
source between DVD/CD player and an auxiliary input
source.
3. MENU Button: Activates the monitor adjustment
12. STOP Button: Stops play of picture or audio.
menu.
13. PLAY Button: Press the button to play or stop tem-
4. UP Button: Adjusts the monitor’s level in menu mode.
porarily.
5. DOWN Button: Adjust the monitor’s level in menu
14. EJECT Button: Press to eject the disc.
mode.
15. Disc Slot: To play a DVD/CD, insert a disc into slot
6. PREV Button: In DVD/CD mode, pressing this button
searches for the beginning of the previous track or
chapter.
with label facing forward.
16. Viewing Screen Release: To release the screen, push
the tab then pull down the screen. Place the screen to
the desired viewing position.
7. Infrared Remote Sensor: This is the sensor for the
infrared remote.
17. Dome Light Switch: Switch to the ON position to
8. Infrared Wireless Transmitter Module: The audio
signal is converted to an infrared light and transmit-
ted to headphones.
activate the dome lights.
18. Dome Lights
5
Screen and DVD/CD Functions
Turning the Unit On:
Inserting a DVD/CD
Press the POWER on either the remote or the screen
housing.
Label Side
Facing Forward
Adjusting the Monitor:
1. Press the MENU button to activate the monitor
adjustment menu. The following will be displayed
on the screen:
Label
2. Use the UP and DOWN buttons on the screen
housing to adjust the screen color.
3. Press the MENU button again to select the next
desired monitor adjustment item.
To play a DVD/CD, insert a disc into slot with label
side facing forward.
Last Memory
After the engine is turned “Off” or the unit is powered
“Off”, the unit will resume play at the point play was
interrupted when the unit is turned back on again.
Changing to an Auxiliary Input Source
Press the MODE button to change the play source
between DVD/CD player and an auxiliary input
source. “GAME IN” will be displayed on the screen.
4. Press the MENU button again until the monitor
adjustment menu disappears or wait 10 seconds
and the menu will automatically disappear.
Note: When pressing the MENU button after the
Contrast screen “AV MODE DVD” appears on the
screen. If the UP or DOWN button is pushed either
“DVD” or “GAME IN” will appear permanently on the
screen. To eliminate the words from permanently
appearing on the screen press the MENU button 6
times.
6
Screen and DVD/CD Functions
Screen’s Remote Control Sensor:
Screen’s Dome Light:
Dome Light Switch
Screen’s Remote
Control Sensor
Dome Lights
To turn on the dome lights, slide the dome light
switch to the On position. Slide the dome light switch
to the Off position to turn them off.
Screen’s remote control sensor receives the remote’s
infrared control signals.
Note: The dome lights will not automatically illumi-
nate whenever the vehicle doors are open. The lights
must be activated manually.
Screen’s Wireless Transmitter Module:
Screen’s Wireless
Transmitter Module
Optional IR Headphone
Model: HP-400
The audio signal is transmitted via infrared light to
the headphones.
7
Remote Control Locations
8. PROG:
Press the button to program the play
order of CD tracks.
13
14
9. PREV/NEXT: Press these buttons to search for
the beginning of track or chapter.
POWER
TITLE
MODE
EJECT
10. REV/FWD:
Scan backward and forward.
1
2
3
4
5
6
7
15
16
11. SLOW:
Press the button to slow play DVD to
1/2, 1/4, 1/8, 1/16, or 1/32 speed.
AUDIO
ANGLE
1
4
2
5
8
0
3
6
12. REPEAT:
For DVD’s, press the button to repeat
title or chapter. For CD’s, press the
button to repeat a track or the entire
disc. For MP3’s, press the button to
repeat file, directory or the entire disc.
SUBTITLE
DISPLAY
SETUP
7
9
17
18
SEARCH
10+
13. TITLE:
Display DVD’s title.
PLAY/PAUSE MENU
14. MODE:
Select DVD and auxiliary inputs func-
tions.
STOP
15. EJECT:
Ejects the disc.
ENTER
19
20
21
PROG
PREV
CLEAR RETURN
16. 0 - 9:
Press these buttons to input num-
bers.
8
9
NEXT
FWD
STEP
A-B
VOL–
ZOOM
PBC
VOL+
17. SEARCH:
18. MENU:
19. STOP:
Locate title, chapter, time and play.
Display DVD’s menu screen.
Stop play of picture or audio.
REV
TFT/POWER
MENU
10
22
23
24
25
SLOW
REPEAT
20. RETURN:
Press the button to return to previ-
ous item.
11
12
MUTE
ROTATE
21. VOL-/VOL+: Press these buttons to decrease or
TFT
FUNCTION
increase volume level.
22. TFT ON/OFF: Turns LCD power On/Off.
23. MENU:
Press the button to change the
screen’s settings: Color, Hue,
Brightness, Contrast. To adjust the
screen’s settings use the screen’s Up
and Down buttons or the remote
1. POWER:
Turns the unit On/Off.
2. AUDIO:
Press the button to change audio
languages.
controls
buttons.
24. ROTATE:
Rotates the picture on the screen.
3. ANGLE:
4. SUBTITLE:
5. DISPLAY:
6. SETUP:
7. ENTER:
Press the button to change DVD’s
picture angle.
25. MUTE:
Press the button during play to stop
audio.
Press the button to change DVD’s
subtitle languages.
Press the button to display disc
information.
Press the button to enter or cancel
SETUP MENU.
Press the button to enter setting.
8
Remote Control Locations and Operation
BASIC OPERATION
Turn the Unit On
POWER
TITLE
MODE
EJECT
1. Turn the car ignition on to the accessory position.
2. Press the POWER button.
AUDIO
ANGLE
1
4
2
5
8
0
3
6
Loading a Disc
1.Insert the disc with printed side facing forward into
the disc slot. The player will automatically search
the disc.
SUBTITLE
DISPLAY
SETUP
7
9
SEARCH
Volume Level Adjustment
Press the VOL or VOL buttons on the remote to
10+
+
-
PLAY/PAUSE MENU
29
30
increase or decrease volume level.
STOP
26
ENTER
Muting the Sound Level
PROG
PREV
CLEAR RETURN
Press the MUTE button during play to stop audio.
Press the MUTE button again to restore sound to the
previous level.
NEXT
FWD
STEP
A-B
VOL–
ZOOM
PBC
VOL+
REV
TFT/POWER
MENU
Ejecting a Disc
Press the EJECT button to eject disc.
31
32
SLOW
REPEAT
27
28
MUTE
ROTATE
PLAY FUNCTION
TFT
FUNCTION
Stopping Play
Press the STOP button to stop the disc playback.
Press the PLAY/PAUSE button on the remote to con-
tinue with normal playback at the position it was
stopped. When the disc is removed or the STOP but-
ton is pressed again, the resume function is cancelled.
26.
Use CURSOR buttons when selecting
setting items or to move cursor up,
down, left or right.
Pausing Play
Press the PLAY/PAUSE button to pause disc during
playback. Press the button again to resume play.
27. STEP:
For DVD frame-by-frame play.
28. A-B:
Press the button during play to set
point A and point B, then program A
and B will be played repeatedly.
Press the button again to cancel.
Scan Forward and Backward
Press the REV or FWD button to scan backward or
forward.
29. PLAY/PAUSE: Press the button to play or stop tem-
porarily.
Return to Previous Chapter or Track
Press the PREV button during playback and the play
returns to the beginning of the previous chapter or
track.
30. CLEAR:
Clear numbers which have been
input.
31. ZOOM:
Press the button during playback of
DVD to enlarge an area on the
screen.
32. PBC:
Video disc playback control. DVD’s
subtitle languages.
9
Basic Operation and Special Functions
PLAY FUNCTION (Continued)
DVD SPECIAL FUNCTIONS
Slow Play
Advance to Next Chapter or Track
Press the NEXT button during playback and the play
advances to the beginning of the next chapter or
track.
Each time the SLOW button is pressed during DVD
play the speed is reduced as follows:
Normal Playback 1/2 1/4 1/8 1/16 1/32
Removing Disc
Press the STOP button, then press the EJECT button
to eject the disc.
Step Play (Frame by Frame)
Pressing the STEP button will pause DVD play.
Pressing the STEP button again will advance play to
the next frame. Repeated pressing will advance the
DVD frame by frame. Press the PLAY button to can-
cel this feature.
Searching for a Specific Chapter or Track
1. Press the SEARCH button on the remote.
2. Press numerical key to select track, chapter or
time.
3. Press ENTER or PLAY to play the selected track,
chapter or time.
Display DVD Menu Screen
1. Press the MENU button to display the menu
screen of the DVD.
2. Use the cursor button to select item.
3. Press ENTER or PLAY to play the selected.
Repeat Play
For DVD’s, press the REPEAT button to repeat title or
chapter.
For CD’s, press the REPEAT button to repeat a track or
the entire disc.
For MP3’s, press the REPEAT button to repeat file,
directory or all.
A-B Repeat
View Angles of DVD
Press the ANGLE button to select the different angles
to view.
Note: If the DVD doesn’t have multi-angle function,
this function isn’t applicable.
Press the A-B button during play to set point A then
press again to set point B. The system will repeated-
ly play the programmed section until the A-B button
is pressed again which cancels the function.
DVD Zoom
Press the ZOOM button during playback of DVD to
enlarge an area on the screen.
Note: In zoom mode, press the CURSOR buttons to
move images up, down, left or right to find the desire
image to zoom in on.
10
Special Functions and Setup Menu
DVD SPECIAL FUNCTIONS (Continued)
SETUP MENU
1. Press the SETUP button on the remote control, and
the setup menu will be displayed. Pressing SETUP
during disc play will pause play. Play will resume
when the setup screen is cancelled.
Multi-Subtitle Language Function
Press the SUBTITLE button during playback. Each
time the button is pressed the subtitle language on
the screen changes.
2. Use the CURSOR buttons
to select
desired function.
Multi-Audio Language Function
3. Press the ENTER button to confirm the selection.
Press the AUDIO button during playback. Each time
the button is pressed the audio soundtrack language
on the screen changes.
CD SPECIAL FUNCTIONS
Program CD Play
1. While the CD is playing push the STOP button
twice (x2).
2. Use the CURSOR buttons to select the first
desired track. Then press ENTER button to con-
firm. For additional tracks repeat Step 2.
3. Press PLAY button to start Program Play.
Note:
•
Random CD Play
1. While the CD is playing push the STOP button
twice (x2).
Setup the "DISC" function when there is no disc in
the DVD player. This function is not available during
disc playback.
Press the RETURN button to go back to the last set-
ting. For example, if you input the wrong password
in the "PARENTAL LOCK" function, press the
RETURN button to return to the last setting so the
password can be input again.
2. Push the PROG buttons twice (x2) to bypass the
programming screen.
3. “CD Random” will be displayed, then push PLAY
button to start Random CD Play.
•
MP3 FUNCTION
Descriptions of the Setup Menu Functions:
DISC - Disc Setting
VIDEO - Video Setting
AUDIO - Audio Setting
DISPLAY - OSD Language Setting
OTHERS - Other Functions Setting
This unit supports MP3 discs. Use the CURSOR but-
tons to move the cursor through the MP3 directory.
Then push ENTER to play desired file.
Note: While a disc is playing, push the PRE or NEXT
button to play the previous or next file on the disc.
11
Setup Menu
DISC SETTINGS
Menu Language Setting
Use the CURSOR buttons
to make DISC
Use this screen to setup the disc menu language.
setting selections. Press the ENTER button to confirm
the setting.
Parental Lock Rating
Audio Setting
Use this screen to setup the audio language on multi-
language discs.
Use this screen to setup the Parental Lock Rating. This
function helps restrict viewing movies with certain rat-
ings (e.g., PG-13, R, etc.) as supported by each DVD.
Subtitle Language Setting
Use this screen to setup the subtitle language on
multi-subtitle language discs.
Parental Lock Password Setting
Use this screen to setup a four-digit parental lock pass-
word. On the remote control, use this NUMERIC keys to
enter the password. Press the ENTER button to confirm the
password.
12
Setup Menu
AUDIO SETTINGS
VIDEO SETTINGS
Use the CURSOR buttons
VIDEO setting selections. Press the ENTER button to
to make
Use the CURSOR buttons
AUDIO setting selections. Press the ENTER button to
to make
confirm the setting.
confirm the setting.
TV Aspect Setting
Use this screen to setup the desired TV Aspect
Ratio.
DISPLAY SETTINGS
Use the CURSOR buttons
Language setting selections. Press the ENTER button
to make OSD
to confirm the setting.
Still Mode Setting
Use this screen to setup the mode to display still pic-
tures. Choose between three modes: Auto, Field and
Frame.
OSD Language Setting
Use this screen to setup the desired OSD Language.
13
Setup Menu
OTHER FUNCTION SETTINGS
Use the CURSOR buttons
OTHERS setting selections. Press the ENTER button
to confirm the setting.
to make
Last Play Function
The Last Play function automatically bookmarks the
position on a DVD/CD disc and remembers the play-
back settings. Playback will resumes at the position
which the player was turned off, the disc was ejected,
or the power was cut off.
Turning Off Last Play Function
Press the SETUP button to display the main menu. Then
use the CURSOR buttons to select the OTHERS menu,
then LAST PLAY and ON. Press the ENTER button to
confirm the setting.
JPEG Time Setting
Use this screen to setup the JPEG image display
time from 1 to 180 seconds.
Default Settings
Use this screen to reset all menus to the factory
default setting.
14
Installation
2a
1
Ceiling
Support
Beams
de
i
st
n
S
is
ai
in
g
Th
A
g
s
nt
l
ei
u
C
Mo
f/
Roo
Disassemble the metal support bracket from
the unit by unscrewing the six screws.
Mount support bracket using screws
(not supplied) with the “This Side Mounts
Against Roof/Ceiling” label against ceiling
support beam(s).
Warning: Take extra care to not penetrate the
roof of your car.
Movievision Bracket
(not supplied)
MV850
Bracket
2b
3
MV850
Bracket
Optional:
Some vehicles may require an optional
custom MovieVision bracket. The long
slots in the MV850 mounting bracket
match up to the screw holes on the
MovieVision bracket.
Attach the screen housing to the metal support
bracket using the screws removed in Step 1.
15
Wiring Diagram
Audio Video Input (Female RCA)
Yellow (Video In)
Red (L-Audio In)
Red (R-Audio In)
Mini DIN Connector
Audio Video Output (Female RCA)
Yellow (Video Out)
White (L-Audio Out)
White (R-Audio Out)
3 AMP
Red Wire - Ignition
Black Wire - Ground
3 AMP
Yellow Wire - Battery
16
Wiring Instructions
Power Harness Wiring:
Yellow Wire: The yellow wire in the harness should
be connected to a constant +12 volt wire that is
NOT turned on and off by the position of the igni-
tion key.
The 3 wire harness provides battery and ignition 12
volts as well as a chassis ground. Route the power
harness to the point in the vehicle that you will make
the connections.
Black Wire: The black wire in the harness should be
connected to the chassis of the vehicle using a
ring terminal and self tapping screw or bolt and
nut.
Red Wire: The red wire in the harness should be con-
nected to a +12 volt power wire that is turned on
and of by the position of the ignition key.
Specifications
Supply Voltage: 12V DC, Negative Ground
Current Consumption: 20 watts maximum
Screen Format: 16:9
Resolution: 480 x 234 pixels
A/V input:
A/V output:
1
1
Compatible Discs: DVD-Video Disc: DVD 8cm or 12 cm disc
(single/double-sided discs)
Compact Disc: CD 12 cm disc
MP3: MP3 12 cm disc
IR Transmitter: Yes
Dimensions (mm): 260(w) x 245(d) x 48(h)
17
Troubleshooting
Only qualified service personnel can remove the No Sound:
cover or service this player. Otherwise the warranty
will become invalid.
• Check audio connections.
• If using a Hi-Fi amplifier, try another sound source.
No Power:
Disc Does Not Play:
• Ensure the disc label is facing forward.
• Clean the disc.
• Check to see if the disc is defective by trying anoth-
er disc.
• Check to see if the player is set to “On”.
• Check to see that the power plug of the main unit is
properly connected.
• Check to see if that power to the outlet is properly
working.
The Player Does Not Respond to the Remote Control:
• Aim the remote control directly at the sensor on the
front of the housing.
No Picture:
• Check to see that the monitor is switched to “On”.
• Check that the correct Mode is selected (DVD or AV)
by pushing the MODE button.
• Avoid all obstacles which may interfere with the sig-
nal path.
• Check the video connection.
•
Inspect or replace the remote control batteries.
Distorted Picture:
Buttons Do Not Work:
• Press POWER to turn “Off” the unit, then press it
again to turn “On” the unit.
• Check the disc for fingerprints and clean with soft
dry cloth, wiping from center to edge.
• A small amount of picture distortion may appear. This
may not be a malfunction.
Volume different for DVD and CD:
• This is due to different recording methods
18
Replacement Parts Order Form
Send Orders To: Magnadyne Corporation
We Accept Checks, Money Orders, Visa and Master Card
ATTN: Consumer Parts Sales
Make Checks Payable to: Magnadyne Corporation
P.O. Box 5365
Carson, CA 90749-5365
SHIP TO: (No P.O. Boxes)
LAST NAME
FIRST NAME
INITIAL
STREET ADDRESS (IF PAYING WITH A CREDIT CARD, YOUR BILLING ADDRESS IS REQUIRED)
CITY
STATE
ZIP CODE
DAYTIME PHONE NUMBER
CREDIT CARD INFORMATION:
CARD TYPE:
VISA
MASTER CARD
CARD NUMBER
EXP. MONTH
YEAR
NAME - EXACTLY AS IT APPEARS ON YOUR CREDIT CARD
Part #
Description
Qty.
Price Each
$39.95
TOTAL
Remote Control
MV1600RM
Shipping and Handling
Subtotal = ________ . ______
Subtotal + Tax
Up to $20.00
20.01 to 30.00
30.01 to 45.00
45.01 to 70.00
Over 70.01
Add
$5.00
5.95
6.50
6.95
7.95
California Residents Add Sales Tax = ________ . ______
Shipping and Handling (See Chart) = ________ . ______
TOTAL = ________ . ______
No C.O.D.’s
On regular orders please allow 4-5 weeks for delivery. Please give a shipping address where this order
may be delivered between the hours of 9 a.m. and 5 p.m. weekdays. If UPS is unable to deliver, your order will be
returned and additional shipping charges will be required.
19
Order By Mail
Replacement Parts for MovieVision®
DESCRIPTION
MODEL #
PRICE
1
4
2
5
8
0
3
6
9
7
10+
DVD Remote Control
MV1600RM
$39.95 Ea.
Warranty
ONE (1) YEAR LIMITED WARRANTY
Magnadyne Corporation or its authorized agents will within 1 year from the date of sale to you, repair, replace or
refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its
authorized agents, if said product or part is found defective in materials or workmanship, when properly connected
and operating on the correct power requirements designated for the specific product. This warranty and
Magnadyne Corporation or its authorized agents obligations hereunder do not apply where the product was;
damaged while in the possession of the consumer, subjected to unreasonable or unintended use, not reasonably
maintained, utilized in commercial or industrial operations, or serviced by anyone other than Magnadyne
Corporation or its authorized agents, or where the warning seal on the product is broken or the power and/or plugs
are detached from the unit. Magnadyne Corporation or any of its authorized agents will not assume any labor costs
for the removal and re-installation of any product found to be defective, or the cost of transportation to Magnadyne
Corporation or its authorized agents. Such cost are the sole responsibility of the purchaser.
This warranty does not cover the cabinet appearance items or accessories used in connection with this product, or
any damage to recording or recording tape, or any damage to the products resulting from improper installation,
alteration, accident, misuse, abuse or acts of nature.
MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO ANYONE
FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE ACCORDED BY LAW.
NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN EXCEPT THOSE SET FORTH HEREIN.
NO IMPLIED WARRANTY SHALL EXTEND BEYOND 1 YEAR FROM THE DATE OF SALE.
This warranty extends only to the original purchaser of the product and is not transferable.
Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitations or exclusion may not apply
to you. This warranty gives you specific legal rights and you may have other rights that vary from state to state.
Defective merchandise should be returned to the original point of purchase or secondly, to Magnadyne
Corporation, 1111 W. Victoria Street, Compton CA 90220. Return Authorization must be obtained before sending,
or merchandise may be refused.
© Copyright 2006 Magnadyne Corporation
MV850-UM Rev. A 3-9-06
|