Items supplied
LED Camera Lamp
2 x 1.5 V Batteries Type AAA/Micro/LR03
This operating manual
Storage
Warranty and Service
LED Camera Lamp KH 3350
If you do not intend to use the appliance for a long time,
remove the batteries and store it in a clean, dry place.
You receive a 3-year warranty for this appliance as
of the purchase date. This appliance has been manu-
factured with care and meticulously examined before
delivery.
Please retain your receipt as proof of purchase. In the
event of a warranty claim, please make contact by
telephone with our Service Department. Only in this
way can a post-free despatch for your goods be
assured. The warranty covers only claims for material
and manufacturing defects, not for transport damage,
wearing parts or for damage to fragile components,
e.g. buttons or batteries.
This appliance is intended solely for private, not
commercial, use. If this product has been subjected to
improper or inappropriate handling, abuse, or modifi-
cations not carried out by one of our authorised sales
and service outlets, the warranty will be considered
void. Your statutory rights are not restricted in any way
by this warranty. The warranty period is not extended
by repairs effected under warranty. This applies also to
replaced and repaired parts.
Please read these operating instructions carefully before
the first use of the appliance and keep them in a safe
place for later reference. Pass these operating instructions
on to whoever might acquire the appliance at a future
date.
Disposal
Check that all of the listed items supplied are present
and do not show signs of damage.
In the event of an incomplete delivery or damage due
to defective packaging or transport, contact the Service
Hotline (see "Warranty and Service").
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the provisions of European
Intended use
This LED Camera Lamp is intended exclusively for non-
commercial use as extra illumination in photo and video
recordings.
Any other, or an additional, usage is considered as
improper and can lead to damage. No liability/warranty
will be granted for damages resulting from improper
use or from unauthorized modifications of the appliance.
Directive 2002/96/EC.
Dispose of the appliance through an approved disposal
centre or at your community waste facility. Observe
the currently applicable regulations. In case of doubt,
please contact your waste disposal centre.
Inserting the batteries
To operate the LED Camera Lamp, 2 x 1.5V Batteries
of the type AAA/Micro (supplied) are required.
• Open the battery compartment cover on the
rear panel.
• Insert 2 AAA/Micro batteries into the battery
compartment. Pay heed to the polarity markings
shown in the battery compartment.
Disposing of batteries
Do not dispose of batteries with household waste.
Every consumer is statutorily obliged to dispose of
batteries at a collection site of his community/city
district or at a retail store. This obligation is intended to
ensure that batteries are disposed of in an environmen-
tally safe fashion. Only dispose of batteries when they
are fully discharged.
Safety Instructions
For safe handling of the device observe the following
safety information:
• Then close the battery compartment by replacing
the cover and letting it snap into place.
This LED Camera Lamp uses Class 1 LEDs.
Do not look directly, unprotected or for a longer
period in the light beam.
Damages or defects discovered after purchase are to
be reported directly after unpacking, at the latest two
days after the purchase date.
Repairs carried out after lapse of the warranty period
are subject to charge.
Mounting the LED Lamp
The LED Camera Lamp can be screwed to a tripod with
the ¼" thread or mounted with the knurled screw onto
the camera accessory shoe.
Dispose of the packaging materials in an
environmentally responsible manner.
• Do not direct the beam of light directly into the eyes
of other people or animals.
• Before use check the device for visible external
damage. Do not take into use an appliance that
is damaged or has been dropped.
• Arrange for a damaged unit to be replaced by
Customer Services.
• Do not make any unauthorised modifications or
changes to the unit.
Technical Data
Operating voltage:
DES UK LTD
Tel.: 0871 5000 700 (£ 0.10 / minute)
e-mail: [email protected]
Mounting onto a camera
3 V DC (2 x 1.5 V Batteries
Type AAA/Micro/LR03)
approx. 2 h
Push the LED Camera Lamp to the stop in the camera
accessory shoe and then secure it with the knurled
screw.
Operating duration:
Dimensions
( W x D x H ):
Weight:
Operating temperature: 5°C–40°C
Colour temperature:
Kompernass Service Ireland
Tel: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
e-mail: [email protected]
approx. 4 x 7 x 4.7 cm
approx. 40 g (without batteries)
Switching the LED lamp on and off
• Protect the device from moisture and liquid penetration.
• Do not use the appliance adjacent to open flames.
With the slide switch on the appliance top panel,
you can turn the LED Camera Lamp on and off.
Slide the switch to the "ON" position to turn the
LED Camera Lamp on.
Slide the switch to the "OFF" position to turn the
LED Camera Lamp off.
white (approx. 5500 Kelvin)
Interaction with batteries
Danger exists from uses other than those intended!
• Do not throw batteries into a fire.
• Never short-circuit batteries.
• Do not attempt to recharge batteries.
• Regularly check the condition of the batteries.
Leaking battery acid can cause permanent damage
to the appliance. Special care should be taken
when handling a damaged or leaking battery.
Risk of acid burns! Wear protective gloves.
• Store batteries in a place inaccessible to children.
If swallowed seek immediate medical attention.
• If you do not intend to use the appliance for an
extended period, remove the batteries.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
Notes on the EC Declaration of
Conformity
This appliance fulfills, with regard to compliance
with the essential requirements and other relevant
regulations, the European Directive for Electro-
magnetic Compatibility 2004/108/EC.
The complete original declaration of conformity
can be obtained from the importer.
44867 BOCHUM, GERMANY
Cleaning
Important!
ID no.: KH3350-04/10-V2
Ensure that no liquids can permeate into the interior
of the LED Camera Lamp. It could cause irreparable
damage to the appliance.
Clean the housing with a lightly moistened cloth.
Do not use abrasive or aggressive cleaning materials.
- 1 -
- 2 -
- 3 -
- 4 -
|