Kodak ZM1 User Manual

KODAK Mini Video Camera  
Extended user guide  
Model Zm1  
For interactive tutorials:  
For help with your camera:  
Product features  
Front view, Bottom view  
Microphone,  
Speaker  
Lens  
USB  
release  
Reset  
button  
Card  
USB  
Battery  
i
 
Product features  
Back view, Closing the door  
LCD  
Power  
Mode (Video/Picture)  
Scroll  
Menu  
OK, Record, Shutter  
button  
Scroll  
Digital Zoom + –  
Strap post  
Battery (not  
user-replaceable)  
Door  
latch  
Door  
USB  
USB  
release  
Important:  
To prevent breakage,  
push at a 45-degree angle.  
ii  
 
Product features  
Understanding the status icons  
Elaps  
ed time  
Recor  
ding  
Reco  
rding  
Batter  
y leve  
l
Zoom  
Card i  
level  
Capt  
ure mo  
de  
nserte  
d
Playb  
ack  
Elapse  
d time  
Batter  
y level  
Volume  
level  
iii  
 
Inserting a MICROSD or MICROSDHC Card....................................................2  
Reviewing, deleting pictures and videos.........................................................6  
Changing settings.........................................................................................7  
Transferring, editing, sharing online...............................................................8  
3 Getting help ..........................................................................................9  
Troubleshooting............................................................................................9  
Getting help on the Web.............................................................................11  
4 Appendix .............................................................................................12  
Specifications..............................................................................................12  
Safety .........................................................................................................13  
Care and maintenance ................................................................................14  
Limited warranty.........................................................................................14  
Regulatory compliance ................................................................................16  
iv  
1 Setting up your camera  
Charging the battery (approximately 1-2 hours)  
Charge the Li-Ion battery whenever necessary. Turn off the camera, first.  
IMPORTANT: Make sure the computer is not in sleep, standby, or hibernate mode.  
3
4
1
Pull the USB out  
until it locks.  
2
Face up or face down.  
5
Close the door properly  
Check battery level  
See page ii  
See the battery icon on the LCD  
1
       
Setting up your camera  
Inserting a MICROSD or MICROSDHC Card  
Your camera has limited internal memory—good for a few practice videos/pictures.  
Check your product packaging to see if a MICROSD or MICROSDHC Card is included.  
If not, we strongly suggest that you purchase a card. (If a card is included, it  
may already be inserted.) Maximum supported card size is 16 GB.  
CAUTION:  
A card can only be inserted one way; forcing it may cause damage.  
Inserting or removing a card while the camera is on may damage the  
video/pictures, the card, or the camera.  
Turn off the camera.  
1
2
Insert the card until  
it clicks and locks  
into place.  
To remove the card,  
push and release it,  
then pull it out.  
Metal  
contacts  
face up.  
NOTE: Avoid touching the  
card’s metal contacts.  
To clean the contacts, use a dry  
cotton swab or a lint-free cloth.  
Close the door properly  
Purchase accessories  
See page ii  
2
   
Setting up your camera  
Connecting the strap  
3
   
Setting up your camera  
Turning on the camera  
Setting the language, date/time  
Language:  
to change.  
to accept.  
OK  
Date/Time:  
At the prompt, press OK.  
OK  
to change current field.  
for previous/next field.  
to accept.  
OK  
Change date/time later see page 7  
4
       
2 Using your camera  
Taking videos and pictures  
Press the OK button to start/stop recording.  
(Press to choose a different recording mode.)  
Take  
videos  
1
2
Take  
pictures  
Press  
to choose Picture  
.
Press the OK button to take a picture.  
Digitally Press  
zoom  
to zoom in and out.  
5
     
Using your camera  
Reviewing, deleting pictures and videos  
Menu  
OK  
Review  
pictures,  
videos  
.
1
2
Press the Menu button  
Press  
• Press  
to highlight Review  
to scroll through pictures/videos.  
, then press OK.  
• Press OK to play a video or zoom a picture.  
• Press to navigate a zoomed picture.  
Press Menu to return to recording mode.  
Delete  
pictures,  
videos  
.
1
2
Press the Menu button  
Press  
Press  
to highlight Review  
to scroll through pictures/videos.  
, then press OK.  
, then press OK.  
Press  
to highlight Delete  
3
Follow the prompts to delete the picture/video.  
Press Menu to return to recording mode.  
6
   
Using your camera  
Changing settings  
Menu  
OK  
.
Change 1 Press the Menu button  
settings  
Press  
to highlight a setting,  
2
then press OK.  
3
to change a setting, then press OK.  
Press  
Press Menu to return to recording mode.  
Review Date/Time Brightness  
Sound  
Format Information  
Card  
7
   
Using your camera  
Transferring, editing, sharing online  
1 Turn on the camera, then connect it.  
Face up or face down.  
Slide the USB release to the right.  
Pull the USB out until it locks.  
Slide the USB release to the right to retract the USB.  
2 If this is the first time you’ve connected to this WINDOWS OS-based computer,  
you’re prompted to install ARCSOFT MEDIAIMPRESSION SE for KODAK Software.  
You can then transfer and share videos and pictures.  
MAC OS—Videos and pictures can be used with the APPLE iLIFE suite of products.  
WINDOWS VISTA/XP—Follow the prompts.  
WINDOWS 7—Choose Open Folder To View Files.  
Launch MI.exe, then click Yes on the User Account Control window.  
Close the door properly  
See page ii  
Get ArcSoft product support  
8
   
3 Getting help  
Troubleshooting  
Icon  
Solution  
Low battery. Charge the battery.  
Corrupt or unusable file(s). Transfer videos/pictures to your computer, then  
format the card or internal memory.  
Internal memory is full. Transfer videos/pictures to your computer, or use a  
MICROSD/SDHC Card to take more videos/pictures.  
Card is full. Transfer videos/pictures to your computer or use another card.  
Unrecognized file. Transfer videos/pictures to your computer.  
An error has occurred. Transfer videos/pictures to your computer, then format  
the card.  
9
     
Getting help  
Problem  
Solution  
Camera will not turn on. Ensure that the battery is charged.  
Ensure the camera is clean and dry. (If it’s wet inside, let it dry  
for 24 hours.)  
Videos are choppy or  
jumpy when played on a  
computer.  
Use ARCSOFT MEDIAIMPRESSION SE for KODAK Software for  
video playback (see page 8).  
Videos are blurry.  
Ensure that the lens is clean.  
Ensure that the subject is at least 1 m (3.3 ft) from the lens.  
Problems with ARCSOFT Go to www.arcsoft.com/support. (For other applications, go  
to their support sites.)  
MEDIAIMPRESSION SE for  
KODAK Software.  
NOTE: If problems persist, go to www.kodak.com/go/support and click Step-by-Step Solutions & Repair.  
10  
Getting help  
Getting help on the Web  
Get support for your product (FAQs,  
troubleshooting information, etc.)  
See step-by-step solutions and repair information www.kodak.com/go/stepbystep  
Purchase camera accessories www.kodak.com/go/Zm1accessories  
Download the latest camera firmware and software www.kodak.com/go/Zm1downloads  
See online demonstrations of your camera  
Register your camera  
Chat, email, write, or phone Kodak  
(Chat not available in all languages.)  
Get information on ARCSOFT Software  
11  
     
4 Appendix  
Specifications  
Image Sensor—1/5-inch CMOS  
Lens—f/2.4; 35 mm equivalent: 40 mm  
Zoom—3X digital  
LCD—4.6 cm (1.8 in.); 61.4K pixels  
Image Storage—128 MB internal memory (approximately 64 MB available for  
image storage. 1 MB equals one million bytes); optional MICROSD/SDHC Card  
(The SD logo is a trademark of the SD Card Association.) Maximum supported  
size: 16 GB MICROSD/SDHC.  
Focusing System—Fixed  
Focus Range—50 cm (1.6 ft)–infinity  
White Balance—Auto  
Exposure—Auto  
File Format—Video: .AVI Motion JPEG; 640 x 480 @ 30 fps and 320 x 240 @ 30  
fps, 320 x 240 @ 60 fps  
Audio: PCM, 8 KHz  
Still: JPEG/EXIF V2.21; 307 KP (640 x 480)  
Shutter Speed—Auto  
Microphone—Mono  
Speaker—Yes  
I/O Interface—USB 2.0 (high speed)  
Tripod Mount—No  
12  
     
Appendix  
Power—Internal, rechargeable Li-Ion battery; in-camera charging via USB connector  
Battery life—Approximately 85 minutes in VGA video recording mode  
Waterproof capability—Conforms to IEC60529 IPX8, up to 3 meters (9.8 ft)  
Dust resistance—Conforms to IEC60529 IP6X  
Size—9.5 x 85 x 56 mm (0.4 x 3.3 x 2.2 in.)  
Weight—70 g (2.5 oz) with battery, card  
Operating temperature—0–40° C (32–104° F); do not expose camera to higher  
temperatures.  
Safety  
CAUTION:  
Do not disassemble this product; there are no user-serviceable parts  
inside. Refer servicing to qualified service personnel. KODAK AC Adapters  
and battery chargers are intended for indoor use only. The use of controls,  
adjustments, or procedures other than those specified herein may result in  
exposure to shock and/or electrical or mechanical hazards. If the LCD  
breaks, do not touch the glass or liquid. Contact Kodak customer support.  
The use of an accessory that is not recommended by Kodak may cause fire, electric  
shock, or injury. For approved accessories, go to  
Use only a USB-certified computer equipped with a current-limiting motherboard.  
Contact your computer manufacturer if you have questions.  
In the unlikely event that battery fluid leaks onto your skin, wash immediately with  
water and contact your local health provider. For additional health-related  
information, contact your local Kodak customer support.  
Go to www.kodak.com/go/reach for information about the presence of substances  
included on the candidate list according to article 59(1) of Regulation (EC) No.  
1907/2006 (REACH).  
13  
 
Appendix  
If using this product in an airplane, observe all instructions of the airline.  
For more information, go to www.kodak.com/go/batteries.  
Care and maintenance  
Before inserting or removing a card, make sure your hands, the camera, and the  
card are completely dry.  
If water has entered the camera, remove the card. Allow all components to air-dry  
for at least 24 hours before using the camera.  
Wipe off dirt or sand from the door seals—debris could compromise the seal and  
cause a leak in water.  
Do not subject the camera to temperatures lower than 0 (32°F) or higher than  
40°C (104°F) for an extended time—the integrity of the seals may be  
compromised. Wait until camera reaches operating temperatures before using.  
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,  
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions  
unless designed specifically for camera lenses. Do not allow chemicals, such as  
suntan lotion, to contact painted surfaces.  
Service agreements may be available in your country. Contact a dealer of KODAK  
Products for more information.  
For camera disposal or recycling information, contact your local authorities. In the  
US, go to the Electronics Industry Alliance Web site at www.eiae.org or Kodak at  
Limited warranty  
Kodak warrants its digital cameras and accessories (excluding batteries) to be free  
from malfunctions and defects in both materials and workmanship for the warranty  
period specified on your KODAK Product packaging. Retain the original dated sales  
receipt. Proof of purchase date is required with any request for warranty repair.  
14  
         
Appendix  
Limited warranty coverage  
Warranty service is only available from within the country where the Products were  
originally purchased. You may be required to ship Products, at your expense, to the  
authorized service facility for the country where the Products were purchased. Kodak  
will repair or replace Products if they fail to function properly during the warranty  
period, subject to any conditions and/or limitations stated herein. Warranty service  
will include all labor as well as any necessary adjustments and/or replacement parts. If  
Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the  
purchase price paid for the Product provided the Product has been returned to Kodak  
along with proof of the purchase price paid. Repair, replacement, or refund of the  
purchase price are the sole remedies under the warranty. If replacement parts are  
used in making repairs, those parts may be remanufactured, or may contain  
remanufactured materials. If it is necessary to replace the entire Product, it may be  
replaced with a remanufactured Product. Remanufactured Products, parts and  
materials are warranted for the remaining warranty term of the original Product, or 90  
days after the date of repair or replacement, whichever is longer.  
Limitations  
This warranty does not cover circumstances beyond Kodak's control. This warranty  
does not apply when failure is due to shipping damage, accident, alteration,  
modification, unauthorized service, misuse, abuse, use with incompatible accessories  
or attachments (such as third party ink or ink tanks), failure to follow Kodak's  
operation, maintenance or repacking instructions, failure to use items supplied by  
Kodak (such as adapters and cables), or claims made after the duration of this  
warranty. Kodak makes no other express or implied warranty for this product. In the  
event that the exclusion of any implied warranty is ineffective under the law, the  
duration of the implied warranty will be the length of the express warranty period  
specified on your KODAK Product packaging. The option of repair, replacement, or  
refund is Kodak's only obligation. Kodak will not be responsible for any special,  
consequential or incidental damages resulting from the sale, purchase, or use of this  
product regardless of the cause. Liability for any special, consequential or incidental  
damages (including but not limited to loss of revenue or profit, downtime costs, loss  
of the use of the equipment, cost of substitute equipment, facilities or services, or  
15  
Appendix  
claims of your customers for such damages resulting from the purchase, use, or failure  
of the Product), regardless of cause or for breach of any written or implied warranty is  
expressly disclaimed. The limitations and exclusions of liability set forth herein apply  
to both Kodak and its suppliers.  
Your rights  
Some states or jurisdictions do not allow exclusion or limitation of incidental or  
consequential damages, so the above limitation or exclusion may not apply to you.  
Some states or jurisdictions do not allow limitations on how long an implied warranty  
lasts, so the above limitation may not apply to you. This warranty gives you specific  
rights, and you may have other rights which vary from state to state or by jurisdiction.  
Outside the United States and Canada  
In countries other than the United States and Canada, the terms and conditions of  
this warranty may be different. Unless a specific Kodak warranty is communicated to  
the purchaser in writing by a Kodak company, no warranty or liability exists beyond  
any minimum requirements imposed by law, even though defect, damage, or loss may  
be by negligence or other act.  
Regulatory compliance  
FCC compliance and advisory  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency energy  
and, if not installed or used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures: 1) reorient or relocate the  
receiving antenna; 2) increase the separation between the equipment and the  
receiver; 3) connect the equipment to an outlet on a circuit different from that to  
16  
 
Appendix  
which the receiver is connected; 4) consult the dealer or an experienced radio/TV  
technician for additional suggestions. Any changes or modifications not expressly  
approved by the party responsible for compliance could void the user’s authority to  
operate the equipment. Where shielded interface cables have been provided with the  
product or specified additional components or accessories elsewhere defined to be  
used with the installation of the product, they must be used in order to ensure  
compliance with FCC regulation. The KODAK High Performance USB AC Adapter  
K20-AM complies with part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) This device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause  
undesired operation.  
CE  
Hereby, Eastman Kodak Company declares that this KODAK Product is in compliance  
with the essential requirements and other relevant provisions of Directive 1999/5/EC.  
Waste Electrical and Electronic Equipment labeling/battery  
disposal  
In Europe: For human/environmental protection, it is your responsibility to dispose  
of this equipment and batteries at a collection facility established for this purpose  
(separate from municipal waste.) For more information, contact your retailer,  
collection facility, or appropriate local authorities; or go to  
www.kodak.com/go/recycle. Product weight: 70 g (2.5 oz) with battery, card.  
Russian GOST-R  
Eastman Kodak  
Company  
17  
Appendix  
China RoHS  
Canadian DOC statement  
DOC Class B Compliance—This Class B digital apparatus complies with Canadian  
ICES-003.  
Observation des normes-Classe B—Cet appareil numérique de la classe B est  
conforme à la norme NMB-003 du Canada.  
Australian C-Tick  
N137  
18  
Index  
A
accessories, purchase, 11  
B
battery charging, 1  
button  
Kodak Web sites, 9  
reset, i  
USB release, i  
C
camera settings, 7  
card, loading, 2  
care and maintenance, 14  
cautions, 14  
changing settings, 7  
charging battery, 1  
clock, setting, 4  
connecting the strap, 3  
connecting to a computer, 8  
M
maintenance, camera, 14  
microphone, i  
on/off, 4  
P
pictures  
D
deleting, 6  
reviewing, 6  
taking, 5  
date setting, 4  
deleting pictures, videos, 6  
digital zoom, 5  
disposal, recycling, 14  
playing a video, 6  
R
E
recycling, disposal, 14  
release, USB, i  
repair, 11  
reset button, i  
reviewing pictures, videos, 6  
erase pictures, videos, 6  
H
help, Web links, troubleshooting, 9  
19  
Index  
S
setting date and time, 4  
setting up the camera, 1  
settings, camera, 7  
sharing online, 8  
software, installing, 8  
specifications, 12  
status icons, iii  
strap, 3  
T
taking pictures, videos, 5  
time and date, setting, 4  
tips, care, & maintenance, 14  
transferring videos, 8  
troubleshooting, 9  
turning on/off camera, 4  
U
URLs, Kodak Web sites, 9  
USB  
connection, 8  
release, i  
V
videos  
deleting, 6  
reviewing, 6  
taking, 5  
W
warranty, 14  
Z
zoom, using, 5  
20  

Rinnai Q175S User Manual
Rinnai EPA 09 0001 User Manual
Philips BDP7500BL User Manual
Philips AQ6481 User Manual
Pelco Car Satellite Radio System C543M A User Manual
Motorola ENLN4111 User Manual
Melissa 646 048 User Manual
Mackie Car Speaker SRM450V2 User Manual
Lanzar Car Audio OPTIDRIVE OPTIMC90 User Manual
Kenwood KDC 315V User Manual