PRODUCT SUMMARY
KODAK KLI-6013 IMAGE SENSOR
6002 X 3 TRI-LINEAR CCD IMAGE SENSOR
DESCRIPTION
The KODAK KLI-6013 Image Sensor is a multispectral,
linear solid-state image sensor for color scanning
applications where high resolution and high dynamic
range are required. The imager consists of three
parallel linear photodiode arrays each with 6000 active
photosites for the output of R, G, and B signals. This
device offers high sensitivity, high data rates, low noise
and negligible lag. Individual electronic exposure control
for each color allows the sensor to be used under a
variety of illumination conditions. There are 16 light-
shielded elements at each end of each array.
Parameter
Typical Value
3 Channel, RGB Trilinear CCD
6002 x 3
12 µm (H) x 12 µm (V)
12 µm
96 µm (8 lines effective)
72.0 mm (H) x 0.20 mm (V)
275,000 electrons
72 dB
FEATURES
Architecture
•
•
•
•
•
•
•
•
•
•
•
•
•
Tri-Linear Color Array 3 x 6002 pixels
8 line spacing between color channels
Single shift register per channel
High off-band spectral rejection
Dark reference pixels provided
Antireflective glass
Pixel Count
Pixel Size
Pixel Pitch
Inter-Array Spacing
Imager Size
Saturation Signal
Dynamic Range
Responsivity
(wavelength = 460, 550, 650 nm)
Output Sensitivity
Dark Current
Dark Current Doubling Rate
Charge Transfer Efficiency
Photoresponse Non-uniformity
Lag (First Field)
19, 24, 33 V/µJ/cm2
8 µV/electron
0.02 pA/pixel
9° C
0.99999/Transfer
6% Peak-Peak
0.5%
Wide dynamic range, low noise
No image lag
Electronic exposure control
High charge transfer efficiency
Two-phase register clocking
74ACT logic compatible clocks
10MHz maximum data rate
Maximum Data Rate
Parameters above are specified at T = 23°C (junction temperature) and
1 MHz clock rates unless otherwise noted.
10 MHz/Channel
APPLICATIONS
•
•
•
Photography
Industrial Imaging
Scientific Imaging
|