PRODUCT SUMMARY
KODAK KAF-10500 IMAGE SENSOR
3970 (H) X 2646 (V) FULL FRAME CCD COLOR IMAGE SENSOR
DESCRIPTION
The KAF-10500 is a dual output, high performance color
CCD (charge coupled device) image sensor with 3970(H)
x 2646(V) photoactive pixels designed for a wide range of
color image sensing applications including digital
imaging. Each pixel contains anti-blooming protection by
means of a lateral overflow drain thereby preventing
image corruption during high light level conditions. Each
of the 6.8μm square pixels are selectively covered with
red, green or blue pigmented filters for color separation.
Microlenses are added for improved sensitivity. The total
chip size is 28.7 mm x 20.2 mm and is housed in a 60 pin,
40.6 mm x 30.7 mm PGA ceramic package with 0.100”
Parameter
Typical Value
Full Frame CCD (Square Pixels)
4098 (H) x 2728 (V) = 11.2 Mp
4010 (H) x 2686 (V) = 10.8 Mp
3970 (H) x 2646 (V) = 10.5 Mp
6.8 μm (H) x 6.8 μm (V)
27.0 mm (H) x 18.0 mm (V)
32.44 mm (diagonal)
3:2
pin spacing.
Architecture
Total Number of Pixels
FEATURES
Number of Effective Pixels
Number of Active Pixels
Pixel Size
•
•
•
•
High resolution
Broad dynamic range
Low noise
Active Image Size
Aspect Ratio
Horizontal Outputs
Saturation Signal
Output Sensitivity
Quantum Efficiency (RGB)
Read Noise (f=24 MHz)
Dark Signal (T=40 °C)
Dark Current Doubling
Temperature
2
60 ke-
Large image area
25 μV/e-
21%, 40%, 32%
APPLICATIONS
15 e-
•
Digital Still Cameras
4 mV
6.3 °C
Linear Dynamic Range
(f=24 MHz, T=40 °C)
Charge Transfer Efficiency
(HCTE/VCTE)
71.5 dB
0.999995
0.999999
Blooming Protection
(4 ms exposure time)
Maximum Data Rate
Package
1000X saturation exposure
24 MHz
Ceramic PGA
IR Absorbing with AR Coating
(both sides)
Cover Glass
Parameters above specified at T = 20°C unless otherwise noted
©Eastman Kodak Company, 2007
Revision 5.0 MTD/PS-0962
|