SpeziExtension Kit
8959-600
Art. Nr.
GB
■ Bolt all the parts together loosely at first, and check that they have been assembled cor-
rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tigh-
ten nuts completely against resistance (locking device). Then check that all screw connec-
tions have been tightened firmly. Attention: once locknuts have been unscrewed they no
longer function correctly (the locking device is destroyed), and must be replaced.
When ordering spare parts, always state the full article number, spare-partnumber, the
quantity required and the S/N of the product (see handling).
Example order: Art. no. 08959-500 / spare-part no. 10100102 / 2 pieces / S/N
....................
Please keep original packaging of this article, so that it may be used for transport at a later
date, if necessary.
Goods may only be returned after prior arrangement and in (internal) packaging, which
is safe for transportation, in the original box if possible.
It is important to provide a detailed defect description / damage report!
Important: spare part prices do not include fastening material; if fastening material (bolts,
nuts, washers etc.) is required, this should be clearly stated on the order by adding the
words „with fastening material“.
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article
correctly and safely (local refuse sites).
USA
KETTLER International Inc.
1355 London Bridge Road
Virginia Beach, VA 23453
+1 888 253 8853
+1 888 222 9333
Checkliste
✓
1
1
2
4
5
2
1
5
13 x 2,4 x 18
Repeat steps of assembling Kettler® Spezi but
use Kettler® Spezi Extension Kit line (40') in place
2
of original line (26').
6 x 60
6,4 x 12,5 x 1,6
2
S8
2
M8 x 35mm
5
8,3 x 16 x 2
11
M8
5
2
3,9 x 13
10
1
C
D
A
1 x
B
3,9 x 13
M8
3 x
2 x
M8 x 35mm
13 x 2,4 x 18
2
3
C
B
A
4 x
2 x
8,3 x 16 x 2
1 x
5
4
B
A
2 x
M8 x 35mm
13 x 2,4 x 18
M8
6
C
A
D
B
E
1 x
12
7
2 x
6 x 60
S8
8
D
C
A
B
E
|