AC-3 RF DEMODULATOR
DEM-999D
INSTRUCTION MANUAL
B60-3233-00 (E)
Names and functions
Ê
Ë
Ì
POWER indicator
Lights (red) when the power switch is set to ON.
Î
Lock indicator
Í
Lights when an AC-3 RF signal is input to the AC-3 RF INPUT jack .
AC-3 DIGITAL OUTPUT (coaxial)
Connect this jack to the coaxial AC-3 DIGITAL IN jack on your AC-3 decoder or
Î
receiver. It outputs AC-3 coaxial digital signals when the POWER
is set to ON
Í
and an AC-3 RF signal is input to the AC-3 RF INPUT jack .
Í
Î
Ï
AC-3 RF INPUT
Connect this jack to the AC-3 RF OUTPUT jack on your LD player.
POWER switch
Use to switch the power ON/OFF.
DC IN (12 V) jack
Connect this jack and inlet power cord to the AC adaptor supplied with your
demodulator. Connect the power cord to a wall outlet after completing all of the
other connections.
3
Specifications
Input level AC-3 RF ........................................................................................ 50 mV p-p ~ 200 mV p-p
RF Frequency responce ...................................................................................... 2.88 MHz~±144 kHz
Output level / Impedance Coaxial ................................................................................ 0.5 Vp-p / 75 W
Dimensions (WxHxD) .................................................................................. 89 mm x 35 mm x 101 mm
Weight...................................................................................................................................... 200 g (net)
Accessories .............................................................. RCA pin cord (2), Power cord (1), AC adaptor (1)
KENWOOD follows a policy of continuous advancements in development.
For this reason specifications may be changed without notice.
4
|