HANDHELD CONTROL HEAD INTERFACE KIT
KRK-11
INSTRUCTION MANUAL
Features
© B62-2102-00 (M)
Note:
The following instructions are for use by your Kenwood dealer, an
authorized Kenwood service facility, or the factory.
◆
This is an optional accessory for the KCH-16.
・
You can connect an external speaker to the interface box.
・
Refer to the Service manual for detailed information regarding the
installation of the KCH-16.
◆
supplied accessories
Item
Part Number
−
Quantity
installation
Interface Box
1
1
1
1
2
1
1
1
1
The following tools and parts are required for installing the handheld
control head interface kit.
Main body panel assembly
Ground cable
−
E30-3085-XX
J61-0307-XX
J21-4354-XX
E59-0426-XX
N99-2069-XX
N99-2070-XX
B62-2102-XX
・ Phillips No. 2 screw driver
KCT-22 Remote Control Cable
・
Retaining band
Retaining bracket
Connector
Screw set
Screw set
hanger
Instruction manual
KCH-16
External speaker
(Option)
Transceiver
Screw set : N99-2069-XX
(For Interface box)
Interface box
KCT-18 (Option)
Ignition Sense Cable
KCT-22 (Option)
Remote Control
Cable
Interface box
Main body panel assembly
Screw set N99-2070-XX
(For Main body panel assembly)
Note:
When connecting the KCH-16 to the Interface box, do not connect
the MIC to the programming connector of the Interface box.
◆
◆
◆
◆
◆
◆
The programming connector of the interface box is dedicated to
programming.
The control connector of the interface box is dedicated to the
KCH-16; do not use this connector for other equipment.
The optional jack is supplied for future expansion. It cannot be used
at this time.
Connector
Ground cable
Do not remove the covers or caps of connectors that are not
currently being used.
After connecting the KCH-16 and turning on the power, do not
remove the KCH-16.
Retaining band
Retaining bracket
|