JVC LST1083 001C User Manual

BLU-RAY DISC & HDD RECORDER

INSTRUCTIONS

(A)

SR-HD1500US

SR-HD1250US

HDD

REC

OPEN/

REC

MODE

INPUT

SELECT

MIDIA SELECT

ONE TOUCH

DUBBING

STANDBY/ON

RESET

HDD

BD/SD

STOP

REV

PLAY

FWD

PAUSE

REC

HDV/DV IN

For Customer Use:

Enter below the Model No. and Serial

No. which are located on the rear of

cabinet. Retain this information for

future reference.

Model No.

Serial No.

LST1083-001C

Safety Precaution

CAUTION:

IMPORTANT SAFETY INSTRUCTIONS

Changes or modifications not approved by JVC could void user’s

authority to operate the equipment.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

Declaration of Conformity

4) Follow all instructions.

Model Number:

Trade Name:

SR-HD1500US

JVC

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

Responsible Party: JVC Americas Corp.

7) Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

Address:

1700 Valley Road Wayne, N.J. 07470

Telephone Number: 973-317-5000

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions:

8) Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the

obsolete outlet.

(1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

10)Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11)Only use attachments/accessories specified by the

manufacturer.

12)Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the

apparatus. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-

over.

Increase the separation between the equipment and

receiver.

13)Unplug this apparatus during lightning

storms or when unused for long periods

of time.

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

14)Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

Consult the dealer or an experienced radio/TV technician

for help.

When the equipment is installed in a cabinet or a shelf, make sure

that it has sufficient space on all sides to allow for ventilation

(10 cm or more on both sides, on top and at the rear).

Failure to heed the following precautions may result in

damage to the unit, remote control or disc/cassette.

1. DO NOT place the unit ^

When discarding batteries, environmental problems must be

considered and the local rules or laws governing the disposal of

these batteries must be followed strictly.

^ in an environment prone to extreme temperatures or

humidity.

Use the supplied power cord.

(If not, fire or electric shock may be caused.)

^ in direct sunlight.

DON'T continue to operate the equipment if you are in any doubt

about it working normally, or if it is damaged in any way -- switch

off, withdraw the mains plug and consult your dealer.

DO be careful with glass panels or doors on equipment.

DO consult you dealer if you are ever in doubt about the

installation, operation or safety of your equipment.

NEVER let anyone especially children push anything into holes,

slots or any other opening in the case -- this could result in a fatal

electrical shock.

^ in a dusty environment.

^ in an environment where strong magnetic fields are

generated.

^ on a surface that is unstable or subject to vibration.

2. DO NOT block the unit’s ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper

or cloth, etc., the heat may not be able to get out.)

3. DO NOT place heavy objects on the unit or remote control.

4. DO NOT place anything which might spill on top of the unit

or remote control.

MOISTURE CONDENSATION

(If water or liquid is allowed to enter this equipment, fire or

electric shock may be caused.)

Moisture in the air will condense on the unit when you move it from

a cold place to a warm place, or under extremely humid

conditions^just as water droplets form on the surface of a glass

filled with cold liquid. In conditions where condensation may occur,

disconnect the unit’s power plug from the wall and keep it

disconnected for a few hours to let the moisture dry, then turn on

the unit.

5. DO NOT expose the apparatus to dripping or splashing.

6. DO NOT use this equipment in a bathroom or places with

water. Also DO NOT place any containers filled with water or

liquids (such as cosmetics or medicines, flower vases, potted

plants, cups, etc.) on top of this unit.

7. DO NOT place any naked flame sources, such as lighted

candles, on the apparatus.

8. AVOID violent shocks to the unit during transport.

Safety Precaution

DISCLAIMER OF LIABILITY

JVC shall not be liable for any loss relating to the unit’s failure to

properly record, store or playback any content (video, audio or

otherwise) for any reason whatsoever. Any applicable warranties

shall only cover replacement or repair of the effected unit, and shall

not apply to recovery or replacement of lost content.

● Manufactured under license from Dolby Laboratories. Dolby and

the double-D symbol are trademarks of Dolby Laboratories.

● Manufactured under license under U.S. Patent #'s: 5,451,942;

5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535;

7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and

worldwide patents issued & pending. DTS is a registered

trademark and the DTS logos, Symbol, DTS-HD and DTS-HD

ATTENTION:

Using a mobile phone in the vicinity of the unit may cause

picture vibration on the TV screen or change the screen to a

black back display.

Some TVs or other appliances generate strong magnetic

fields. Do not place such appliances on top of the unit as it

may cause picture disturbance.

When moving the product, press A to turn off the power,

and wait at least 30 seconds before unplugging the power

cord. Then, wait at least 2 minutes before moving the

product.

If there is a power outage when using the unit, the recorded

data may be erased.

It is recommended to back up discs which contain important

recordings periodically (every few years). As digital signals

do not deteriorate, failure to play back or record might arise

due to the effects of the disc aging through the years

depending on the storage environment.

● This product incorporates copyright protection technology that is

protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing

uses only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

● DVD logo is a registered trademark of DVD Format/Logo

Licensing Corporation.

● HDMI, the HDMI logo and High-Definition

Recorded programs and data cannot be restored once the

disc or tape is damaged.

Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC.

● “Blu-ray Disc” and the “Blu-ray” logo are trademarks.

● “x.v.Color” and the “x.v.Color” logo are trademarks of Sony

Corporation Co., Ltd.

● This unit can play back and record only NTSC signals.

The hard disk is a consumable item. Replacement is

recommended after 10000 hours of use (if use in a 25°C

environment). For information on maintenance planning and

costs, consult your nearest JVC dealer.

● Java and all Java-based trademarks and logos are trademarks or

registered trademarks of Sun Microsystems, Inc. in the United

States and other countries.

The fan motor is a consumable item. Replacement is

recommended after 30000 hours of use (if use in a 25°C

environment). For information on maintenance planning and

costs, consult your nearest JVC dealer.

● SDHC logo is trademark.

● “AVCHD” and the “AVCHD” logo are trademarks of Panasonic

Corporation and Sony Corporation.

● Other product and company names included in this instruction

manual are trademarks and/or registered trademarks of their

respective holders.

If this symbol is shown, it is only valid in the European

Union.

● This product is licensed under the AVC patent portfolio license

and VC-1 patent portfolio license for the personal and non-

commercial use of a consumer to (i) encode video in compliance

with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”)

and/or (ii) decode AVC/VC-1 Video that was encoded by a

consumer engaged in a personal and non-commercial activity

and/or was obtained from a video provider licensed to provide

AVC/VC-1 Video. No license is granted or shall be implied for any

other use. Additional information may be obtained from MPEG

LA, LLC. See http://www.mpegla.com.

HOW TO USE THIS INSTRUCTION MANUAL

● All major sections and subsections are listed in the Table Of

Contents on page 5. Use this when searching for information on

a specific procedure or feature.

● The A mark signals a reference to another page for instructions

or related information.

● Operation buttons necessary for the various procedures are

clearly indicated through the use of illustrations at the beginning

of each major section.

Batteries -- Incorrect use of batteries may cause the batteries

to burst or ignite. A leaky battery may corrode the equipment,

dirty your hands or spoil your clothing. In order to avoid these

problems, make sure to observe the precautions below:

● Use the specified batteries only.

BEFORE YOU INSTALL YOUR NEW UNIT . . .

. . . please read the sections/literature listed below.

● “Cautions” on page 2

● Install the batteries with due attention to the plus (+) and

minus (-) sides of the batteries according to the instructions in

the compartment.

“IMPORTANT SAFETY INSTRUCTIONS” on page 3 to 4

● Do not mix old and new batteries.

● Do not mix batteries of different types. Voltage specifications

of batteries of the same shape may vary.

● Replace an exhausted battery with a new one promptly.

● If you will not use the remote control for a long time, remove

the batteries.

● If leaked battery fluid gets on your skin or clothing, rinse

immediately and thoroughly. If it gets into you eye, bathe your

eye well rather than rubbing and seek medical treatment

immediately. Leaked battery fluid that gets into your eye or

your clothing may cause a skin irritation or damage your eye.

●

Do not put the batteries in a place where young children can reach.

Contents

Playing Still Images (JPEG) ............................................ 55

Changing Playback Settings ........................................... 56

Playback Settings Menu .................................................. 56

Audio/subtitle settings .................................................. 56

Playback settings ......................................................... 56

Video settings .............................................................. 57

Contents

Safety Precaution

Contents

Editing

Getting Started

Editing ............................................................................. 58

Entering Characters ........................................................ 59

Character List .............................................................. 59

Grouping .......................................................................... 60

Changing the Title/Group Name ...................................... 62

Deleting a Title/Group ..................................................... 62

Turning On Title/Group Protection .................................. 63

Turning Off Title/Group Protection .................................. 64

Creating a Playlist ........................................................... 65

Editing a Thumbnail ......................................................... 66

Editing a Chapter ............................................................. 67

Dividing ............................................................................ 69

Delete Scenes ................................................................. 70

Changing the Disc Name ................................................ 72

Changing the Shooting Date/Time .................................. 72

Mode conversion ............................................................. 73

Key Features ..................................................................... 6

How to Read this Manual .................................................. 6

Other Precautionary Notes ................................................ 7

Hard Disk Drive (HDD) ...................................................... 8

SD Cards ........................................................................... 8

Discs .................................................................................. 9

Precautions on the Use of Discs ..................................... 11

On-screen Displays ......................................................... 12

Name and Function of Parts ............................................ 13

Front panel ................................................................... 13

Display window ............................................................ 14

Rear panel ................................................................... 14

Remote control ............................................................ 15

Preparation

Connecting a Monitor ...................................................... 17

Connecting a Video Deck or Other Equipment ............... 18

Connecting an Amplifier .................................................. 18

Connecting External Devices .......................................... 19

Connecting the Power Supply ......................................... 19

Setting and Displaying Date/Time ................................... 20

Settings Menu

Changing Settings of this Unit ......................................... 74

Setting Menu List ............................................................. 74

Setup ........................................................................... 75

Playback Setting .......................................................... 76

Record ......................................................................... 77

Audio ............................................................................ 78

Display ......................................................................... 79

Connection ................................................................... 80

Dubbing/Importing

Dubbing/Importing ........................................................... 23

Dubbing chart .............................................................. 24

Formatting ....................................................................... 25

Recording Modes ............................................................ 28

Importing Data to the HDD Using the ONE TOUCH

DUBBING Button ......................................................... 29

Importing Data from a BD/DVD to the HDD .................... 30

Importing Data from a USB-compatible Device to the HDD

...................................................................................... 33

Importing Data from an SD Card to the HDD .................. 35

Importing Data from an i.LINK-compatible Device to the

HDD ............................................................................. 37

Dubbing a Title from the HDD to a BD/DVD .................... 39

Dubbing Still Images from the HDD ................................ 42

Enabling Playback on Other Devices (Finalizing) ............ 44

Copying the Entire Disc ................................................... 46

Recording Using External Inputs ..................................... 47

Others

Locking the Disc Tray ...................................................... 82

Turning on the Mode Lock ............................................... 82

Last Function Memory ..................................................... 82

RS-232C Interface (only for SR-HD1500) ....................... 83

Command Table .......................................................... 83

Specifications ............................................................... 83

Command .................................................................... 84

Language Code List ........................................................ 94

Country Code List ............................................................ 96

Using the HDMI Consumer Electronics Control (HDMI

CEC) ............................................................................ 98

Creating a Seamless BD ................................................. 98

Troubleshooting ............................................................... 99

Specifications ................................................................ 101

Index .............................................................................. 102

Playing Back

About Playing Back ......................................................... 48

Using Playback Navigation .............................................. 48

Option menu list ........................................................... 50

Video Playback Operation ............................................... 51

Playing Videos on a BD/DVD .......................................... 53

Playing Videos on the HDD ............................................. 54

Playing Videos on a SD Card .......................................... 54

Getting Started

Key Features

How to Read this Manual

Professional Blu-ray Disc recorder of the

high-definition era

Copy videos to a Blu-ray Disc in high-definition from a high-

definition camcorder, or down convert the videos and record

them onto DVDs, all without the need for a PC.

The internal hard disk drive enables for easy editing and

dubbing multiple discs.

About this manual

This manual mainly describes operation procedures using the

remote control unit buttons.

The buttons on the remote control unit are indicated as

[Button Name].

The menu items are indicated as “Menu Item”.

Supplementary remarks in the main text

Compatible with ProHD Camcorder GY-

HM700/100 (only for SR-HD1500)

MOV files that are taken in SP mode (*1) using the JVC

ProHD Camcorder GY-HM700/100 are compatible with the

SR-HD1500, and can be imported into the HDD or dubbed

onto discs.

Memo : States restrictions on the functions or use of this unit.

Note : States precautions to be taken during operation.

: Indicates the page numbers or items to refer to.

Memo:

The displays of operable media are highlighted.

(*1) SP mode : 1280x720/60p, 30p, 24p, 1440x1080/60i

HDD : Hard disk

DVD : DVD

Compatibility with other consumer

camcorders

In addition to AVCHD, HDV and DV, JVC Everio file formats

are also compatible, and digital dubbing can be done.

: Blu-ray disc

: SD card

SDHC : SDHC Card

: Music compact disc

JPEG : JPEG (still picture) file disc

Digital interface that allows for camcorder

compatibility

This unit is equipped with USB, SD slots and i.Link input

terminals for connecting the camcorder.

The unit illustrations used in this manual are from the SR-

HD1500.

Refer to the supplied CD-ROM for the Spain and French

GUIDEBOOK.

In order to view the GUIDEBOOK, AdobeT AcrobatT

ReaderE or AdobeT ReaderT must be installed.

AdobeT ReaderT can be loaded from Adobe’s

web site:http://www.adobe.com/

Create menu-supported Blu-ray discs

Blu-ray discs can be created using the BDMV (with menu)

format. BDAV discs can also be created and dubbed

according to the intended use.

The SR-HD1500 also enable users to use an original image

as the background.

Menu operation

Pressing the remote control buttons below calls up the

respective menu screens.

Compatible with dual layer 50 GB Blu-ray

discs, and records up to 24 hours of full

high-definition images in a single disc

[SET UP], [NAVIGATION], [EDIT], [INFORMATION

This unit is also compatible with high capacity dual layer 50

GB Blu-ray discs, and up to 24 hours (AE mode) of full high-

definition images can be recorded in a single disc.

CORRECT], [DUBBING], [MEDIA MANAGE]

Press any of the [ J / K / H / I ] buttons to move to a

Writing to inexpensive LTH discs is also supported.

specific menu item (yellow item indicated by a small arrow).

Press the [OK] button to confirm the selection.

Press the [RETURN] button to return to the previous screen.

Authoring menu enables discs to be

created and used industrially such as for

demonstrations

Simple instructions on the operation procedure may be

displayed at the bottom of the screen.

Disc authoring can be used to create discs for industrial use,

such as discs that repeat playback automatically.

Equipped with external control RS-232C

terminal (only for SR-HD1500)

This unit is equipped with a RS-232C terminal that allows for

external control using a PC.

Getting Started

Disclaimer of compensation for loss or

Other Precautionary Notes

damage of stored video content

Please note that our company will not be liable for compensation

of the content or any incidental damages in the event that

dubbing or playback cannot be performed properly for some

reasons. The same applies during repair of this unit.

This unit supports copyright protection technologies.

Copyrights

According to the copyright law, video or music data that you

store must not be used for purposes other than personal

enjoyment without the authorization of the copyright holder.

Handling precautions

Do not use the plug or power point with dust

or metallic objects attached to it

Failure to do so may cause short circuit or heating, and

This product employs the CPRM technology, and is protected

result in fire or electric shock.

by the proprietary technologies as well as intellectual property

rights of the United States and Japan.

Remove the plug once every half a year, and clean it with a

Use of the CPRM technology is subject to the approval of

Macrovision Solutions Corporation. Unless special

authorization is obtained from Macrovision Solutions

Corporation, the CPRM is restricted to household and some

pay-per-view uses. Do not dismantle or remodel this product.

The copyright protection function prevents copyrighted video

images from being saved to equipment such as a video

recorder. This function may also cause deterioration in the

playback picture quality when the data is output to a monitor

through a video recorder. This is not a hardware malfunction.

To play back copyrighted videos, connect this product directly

to the monitor.

dry cloth.

Make use of a power point that allows the

power plug to be inserted or removed easily

Make sure that the plug can be removed immediately in

case an abnormality is found in the unit.

Insert the plug firmly into the power point

Failure to do so may cause short circuit or heating, and

result in fire or electric shock.

Do not make use of a power voltage other

than that specified

Doing so may result in fire or electric shock.

Read and understand fully the terms and conditions of all

manner. Under no circumstances shall JVC take any

responsibility for any infringements of copyright caused by

the customer when using this unit. The customer shall be

responsible for resolving all legal issues regarding to any

Do not insert or remove the plug with wet

hands

Doing so may result in electric shock.

Do not touch the plug when there is thunder

or lightning

Doing so may cause electric shock.

Stored video content and compensation

For discs containing important video content, backup on a

periodic basis (once every few years) is recommended.

Although digital signals do not deteriorate, playback or

dubbing may fail due to aging of the disc resulting from the

storage conditions.

Do not insert any foreign object into this unit

Doing so may result in fire or electric shock.

Do not dismantle or remodel this unit

This unit consists of high-voltage components. Dismantling

or remodeling the unit may cause fire or electric shock.

Recorded data may be lost if power outage occurs while

this unit is being used. It is therefore recommended that

videos stored on the HDD be dubbed to a BD or DVD as

soon as possible in case the HDD breaks down.

Request the authorized dealer to inspect the

interior part of the unit once a year

Using this unit with dust accumulated inside may result in fire.

Videos or data stored on a BD/DVD, HDD, or SD card

cannot be recovered if the media is damaged.

It is particularly effective to perform servicing before the

humid rainy season.

Do not connect any video cameras that are

not made by JVC to the USB terminal

Doing so may result in malfunction.

Getting Started

Hard Disk Drive (HDD)

SD Cards

Hard disk drive (HDD)

The HDD rotates at a high speed whenever the power is

turned “On”.

Pay particular attention to the following precautions when

using this unit.

Precautions for handling SD and SDHC

cards

Note:

The disc operation display icon appears blinking and

“READING” is displayed on the display window when the SD

card is being accessed (such as during dubbing, playback, or

formatting). When access to the SD card is in progress, do not

remove the card or the power plug. Doing so may cause the

SD card to become unusable.

Warning

Do not subject it to vibration or strong impact

Subjecting this unit to excessive impact may result in loss of

recorded data and even damage of the HDD.

If the SD card is not usable, reformat the card. If the problem

persists even after reformatting, use a new SD card.

Do not remove the power plug when this unit is running

Do not use or store the card at a place that is subject to static

Shutting down the power when the HDD is running may result

in data loss and even damage of the HDD. Make sure that the

power plug is removed only after turning off the power.

(Wait for the “GOODBYE” message on the display window to

disappear first)

or electrical noise.

Inserting the SD card incorrectly may cause this unit or the

card to malfunction.

Our company will not be liable for any damage or loss of the

stored data due to accidents. (Be sure to back up the data.)

Use the card according to the prescribed conditions. Do not

use it at the following locations.

Places that are exposed to direct sunlight

Places near heat-generating equipment

Inside a car that is under the sun with the windows tightly

shut

Places that are subject to high humidity and corrosion

Do not bend or drop the card, or subject it to strong impact

or vibration.

Do not expose the card to water.

Do not place near devices that emit strong magnetic or

radio waves.

Do not touch the metal part of the card.

Memo:

To dispose a card after erasing all data inside, it is

recommended that this be done using a commercially

available data deletion software, or by destroying the card

physically, such as with a hammer. Formatting or deletion

of data using this unit only changes the file administration

information, and does not erase the data completely.

BD video data

You can erase BD Video data from the SD card as follows.

Insert the SD card which has BD video data

stored on it, into the [SD SLOT]

Memo:

The BD video data cannot be erased if the SD card is write-

protected. In this case, turn off the write-protect lock before

inserting the SD card.

Press the [MEDIA MANAGE] button on the

remote control unit

Select “BD-VIDEO DATA ERASE” from “SD

CARD”

The confirmation screen for erasing the BD video data is

displayed.

Select “ERASE”, and press the [OK] button

The BD video data will be erased.

Getting Started

When using DVD-RW discs

Discs

Formatting is required. Format the disc using this unit.

Format using “VR MODE” or “VIDEO MODE”.

BD recording formats

BDAV mode

Videos can be edited (chapter edit etc) and new videos can

be added to the disk. This format is suitable for recording

videos.

MPEG2 with HD quality will be recorded as it is onto the

disc. This format has low playback compatibility, but

performs well when used for backups.

BDMV mode

Compatible and playable on other BD players. Menu

functions similar to those of DVD video mode are also

included.

This format performs well for distribution purposes.

DVD recording formats

VR MODE

Format the disc using “VR MODE” if you want to add new

videos to the disc.

Deleting currently saved videos increases the remaining

space on the disc. (except for the case of DVD-R discs.)

VIDEO MODE

Format the disc in this mode if you want to play the disc on

a different DVD player.

Formatting of discs

Formatting is required for some disc types. Perform

formatting if this is necessary.

When using BD-RE or BD-R discs

Formatting is required. Format the disc using this unit.

When using DVD-R discs

Formatting is required depending on the disc mode to be used.

Formatting is required when the disc is used in “VR MODE”

. Format the disc using this unit.

Formatting is not required when using the disc in “VIDEO

MODE”.

Note:

BD-R and DVD-R discs cannot be reformatted. Check the

disc mode before formatting the disc.

Getting Started

Discs (Continued)

Discs that enable both dubbing and

playback

Disc Type

Recording Format

Format

Finalize

Repeated Use

(Reformat)

BD-RE

BDAV mode

BDMV mode

BDAV mode

BDMV mode

Video mode

VR mode

BD-R

DVD-RW

DVD-R

Video mode

VR mode

Discs that enable playback only

Disc Type

Description

DVD-RAM (4.7 GB)

BD-ROM

Supports specific forms of playback, but no recording can be done.

Commercially available Blu-ray discs (movies, music, etc.)

The region code that can be played back on this unit is “A”.

DVD video

Music CD

Commercially available DVD-Video discs (movies, music, etc.)

The region code that can be played back on this unit is “1”. The video format used is NTSC.

CD-DA

DTS music CDs are also playable.

Memo:

If 8 cm discs are used, only playback can be performed. The disc cannot be used for recording or editing.

8 cm discs can be used without adapters.

DVD-RAM cartridges and BD-RE are not supported. Take the DVD-RAM out of the cartridge before using it.

Discs that are not supported

DVD-RAM (2.6 GB/5.2 GB)

DVD-R (for authoring)

CD-ROM/R/RW (PhotoCD, CD-G, VCD etc.)

DDCD (1.3 GB, Double Density CD)

HDCD (High Density CD)

Memo:

To playback a BD or DVD that was created using this unit on another player, finalize the disc.

There is no need for finalizing if the BD-RE disc is recorded using BDAV mode.

If a DVD that was recorded using VR mode has been finalized, the disc can only be played back on VR mode compatible

devices.

To perform high-speed dubbing, make use of a disc that supports high-speed recording.

This unit can play back and record only NTSC signals.

Note:

Do not use disc if the sticker or label is peeled off from the disc surface, if the disc is not round in shape, or if it is significantly

warped or cracked.

Getting Started

Disc storage

Avoid storing the disc at the following locations.

Precautions on the Use of

Discs

Places that are subject to high humidity, dust, or mold

growth

Places that are exposed to direct sunlight or near a

Maintenance of discs

Dirt attached to the disc, such as fingerprints and dust, may

cause distortion in the video image or sound.

Keep the disc clean at all times such as by using a soft

cloth.

heater

Inside a car during summer

Do not drop the disc or subject it to strong impact.

Place the disc in a case and store it vertically.

Stacking the discs without using a case, placing the discs

against one another or dropping them may result in

deformation or cracking.

Wipe the disc lightly from the center outward using the

cloth.

If dirt is stubborn, wipe it off using a slightly wet cloth,

followed by a dry cloth.

Do not use thinner, benzine, alcohol, conventional record

cleaners, or antistatic sprays.

Doing so may damage the disc surface.

When the recording/playback lens is dirty

Dust or dirt may be attached to the recording/playback lens

after using this unit for a prolonged period of time, and

recording or playback may not be properly performed as a

result.

Although the performance of this unit varies according to the

frequency of use and installation environment, it is

recommended that cleaning of the lens be performed once

every half a year using commercially available DVD lens

cleaners.

Handling discs

Removing a disc

For cleaning procedures, refer to the instruction manual of the

lens cleaner.

Precautions when playing a dual disc

The side of the dual disc that is not used for DVD recording

does not comply with the standard specifications of music

CDs.

Keeping a disc

It is recommended that playback on this unit be limited to the

DVD recording side of the dual disc.

Use genuine JVC discs

The best performance may not be obtained for some discs.

It is recommended that genuine JVC discs be used to ensure

the best results.

Correct way to hold a disc

Power Cable

Do not unplug the cable during recording or playback.

Doing so may cause the disc to become unusable.

If the disc becomes unusable, refer to the following.

Make sure that your hands do not touch the recording/

playback side of the disc.

BD-R or : Use a new disc.

DVD-R

BD-RE or : Reformat the disc after erasing the data. If the

DVD-RW

disc is still not usable, use a new disc.

Do not turn off the [A] button or unplug the power cable

immediately after closing the disc tray.

Getting Started

On-screen Displays

Status display

Displays the current settings and operating status (such as

playback, pause) of this unit.

Pressing the [ON SCREEN] button on the remote control

displays the status. To cancel the display, press the [ON

SCREEN] button again.

You can select whether to display the statuses by changing

the settings in the settings menu.

For more details, refer to “Display” (A page 79) .

Memo:

To display the statuses, set the ON SCREEN GUIDE item

on the DISPLAY menu screen to “AUTO”.

Setting the DISPLAY item to “OFF” hides display of all

status information.

Event display

An on-screen event display appears on the display window as

well as the monitor when there is a misoperation.

The event display appears for an interval of about three

seconds.

Memo:

The same event display may appear several times.

Alarm display

When an operation is not accepted by this unit, an on-screen

alarm display appears on the display of the main unit as well

as the monitor.

Getting Started

Name and Function of

Parts

Front panel

E FG H I J K L M

A [ A ] button

Turn On/Off the power.

N Playback control buttons

[ I ] button

Plays back the data.

B Disc tray

C [ M ] button

[ o ] button

Stops playback/recording.

Opens/closes the disc tray.

[ O ] button

D Display window

E Remote control sensor

Fast reverses playback.

[ N ] button

F [RESET] switch

Reset the unit.

Fast forwards playback.

[ W ] button

G [REC MODE] button

Pauses playback.

Switches the recording mode.

O [ R ] button

Starts recording of a title.

H [HDD] lamp

Lights up when in HDD mode.

The [REC] lamp lights up while recording/importing.

P [SD SLOT]

Used for inserting SD cards.

I [INPUT SELECT] button

Switches the external input signals (HDV/DV, L1).

Q [i.LINK(HDV/DV IN)] terminal

Connect a video camera using i.LINK (HDV/DV. IN).

J [BD] lamp

R [USB] terminal

Connect a video camera using USB.

Lights up when in BD/DVD mode.

The [REC] lamp lights up while recording/dubbing.

K [MEDIA SELECT] button

Switches between HDD and BD/SD.

L [SD] lamp

Lights up when in SD mode.

M [ONE TOUCH DUBBING] button

Starts dubbing at a single touch.

Getting Started

Name and Function of

Parts (Continued)

Display window

English messages appear for a number of operations.

(Examples)

A HDD/DISC remaining level display

B Dubbing display

HELLO

: When the power plug is inserted

: When reading the disc

C Disc status display

READING

D HDMI output display

ONSCREEN : Upon moving to the playback navigation

screen

Memo:

The brightness of the display window can be adjusted.

For more details, refer to “PANEL DISPLAY BRIGHTNESS”

(A page 75) .

Rear panel

F [SERIAL COM.(RS-232C)] terminal

(only for SR-HD1500)

A AC inlet

For connecting the power supply.

For connecting to a computer using a serial cable.

B Cooling fan

G [HDMI] terminal

For connecting using an HDMI cable.

C [DIGITAL AUDIO OUT (OPTICAL)] terminal

For connecting to the amplifier using an optical audio cable.

H [S-VIDEO OUT/IN] terminals

For connecting using an S-video cable.

D [AUDIO OUT/IN] terminals

For connecting using an audio cable.

I [COMPONENT VIDEO OUT] terminals

For connecting using a component video cable.

E [VIDEO OUT/IN] terminals

For connecting using a video cable.

J [REMOTE IN] terminal

For connecting a wired remote control.

Getting Started

I [ J / K / H / I ]

The cursor can be moved to select an item.

Remote control

J [OPTION]

Displays the option screen.

K [ S ]

Move to the chapter just before the current chapter.

L [ O ]

Fast reverses the video and starts slow playback.

M [ R ]

Press the [ R ] and [ I ] buttons together to start recording.

N [REC MODE]

For checking the recording mode settings and amount of time

remaining.

O [ON SCREEN]

Displays information on the screen.

P [PROGRESSIVE SCAN]

Switches the resolution of the image output.

Q [AUDIO]

Switches the playback audio.

R [EDIT]

Displays the editing menu screen.

S [MEDIA MANAGE]

Displays the media management menu screen.

T [ A ]

For turning On/Off the power.

U [INPUT SELECT]

Switches the external input signals (HDV/DV, L1).

V [BD/SD]

For operating BD/DVD or SD.

W [PAGE PRV][PAGE NEXT]

Returns to the previous page. Or advances to the next page.

A [DELETE]

X [ w ]

Deletes a title or characters.

Move the playback position slightly backwards.

B [ M ]

Opens/closes the disc tray.

Y [ v ]

Advance the playback position slightly.

C [HDD]

For operating the HDD.

Z [#]

For entering characters.

D [1]-[9]

For entering characters.

a [YELLOW]

Enabled when the color button (yellow) is displayed.

E [Z]

For entering characters.

b [BLUE]

Enabled when the color button (blue) is displayed.

F [RED]

c [NAVIGATION]

Displays the playback navigation screen.

Enabled when the color button (red) is displayed.

G [GREEN]

Enabled when the color button (green) is displayed.

d [OK]

Confirms a selection or entry.

H [DUBBING]

Displays the dubbing menu screen.

e [RETURN]

Returns to the previous screen without applying the selection

or entry.

f [ T ]

Move to the next chapter.

Getting Started

Remote control codes

Name and Function of

Parts (Continued)

By setting a remote control code for the unit and remote

control, you can prevent two recorders from operating

simultaneously using the remote control for this unit.

(the setting for the unit and remote control at time of purchase

is “REMOTE CONTROL 3”.)

g [ N ]

Fast forwards the video and starts slow playback.

h [ I ]

Plays the video.

Memo:

Changing the remote control code for the remote control

before the unit’s remote control code is changed will cause

the unit to be inoperable.

Change the unit’s remote control code first when changing

remote control codes.

i [ W ]

Pauses the video that is currently playing.

j [ o ]

Stops playback/recording.

Changing the remote control code for the

unit

Press the [SET UP] button on the remote control

to display the “SETUP” menu

k [MARK]

Adds a chapter mark during playback or recording. Select

multiple titles from the playback navigation screen or other

screens.

Change the “REMOTE CONTROL CODE” option

in the “SETUP” menu

l [PB MODE]

Display the playback settings screen.

Memo:

m [ANGLE]

Switches the camera angle for playback.

For more details, refer to “REMOTE CONTROL CODE” (A

page 75) .

n [SET UP]

Changing the remote control code for the

remote control

Press and hold the [OPTION] button on the

remote control

Displays the settings menu screen.

o [SUB TITLE]

Switches the playback subtitle.

p [INFORMATION CORRECT]

Displays the information editing screen.

Press either of the [1], [2], [3] or [4] buttons

Press the number button that is equivalent to the remote

control code you desire.

Change batteries for the remote control

If the operable distance of the remote control unit becomes

Press the [OK] button

Press the [OK] button to change the remote control code.

shorter, this means that the batteries are running out.

When this occurs, replace the batteries with new ones.

Release the [OPTION] button on the remote

control

Memo:

If the remote control code is different from the unit, the

remote control code for the unit will be displayed on the

display window.

Examples: REMOTE CONTROL 3

Batteries

Insert the batteries correctly according to the + and - signs.

Insert the - side of the battery first.

If an error occurs while using the remote control unit,

remove the batteries, wait for about five minutes, and

operate the remote control unit again after re-inserting the

batteries.

Battery life : Approximately 6 months

(depending on the frequency of use)

Preparation

Memo:

Connecting a Monitor

After connecting a component video cable, change the unit

setting to “COMPONENT OUTPUT”.

To display video images from this unit, connect it to a monitor.

For more details, refer to “COMPONENT OUTPUT” (A page

81) .

This unit supports connections using “HDMI cable”,

“component video cable”, “S-video cable”, or “video cable”.

Memo:

Switch to the appropriate monitor input according to the

Connecting using an S-video cable

Connecting using an S-video cable (sold separately) delivers

video images that are clearer than those by a video cable.

type of connection cable used.

For details, refer to the instruction manual of the monitor.

Connecting using a HDMI cable

Connecting using a HDMI cable (sold separately) enables

signals to be maintained in the digital format, and thus

playback of clear video images.

Connecting using a video cable

Connect the output terminal of this unit to the input terminal of

a TV using the supplied video/audio cable.

(Use the supplied BNC adapter)

Memo:

Videos cannot be displayed on a monitor that does not

support the copyright protection system (HDCP).

Use a High Speed HDMI Cable.

After connecting using a HDMI cable, change the unit

setting to “HDMI CONNECTION”.

For more details, refer to “ VIDEO PRIORITY MODE ” (A

page 80) .

Connecting using a component video cable

Connecting using a component video cable (sold separately)

delivers playback images that are clearer than those by an S-

video cable.

Note:

Connect the S-video/video output of this unit directly to the

TV (or monitor). Connecting this unit to the TV or monitor

via a video deck triggers the copy protection function, and

may cause distortion in the video images during playback.

Preparation

Connecting a Video Deck

or Other Equipment

Connecting an Amplifier

Connecting an audio amplifier

Connecting using an optical digital cable

Connecting a video camera

Connecting via the i.LINK terminal

HDD

REC

OPEN/

REC

MODE

INPUT

SELECT

MIDIA SELECT

HDD

ONE TOUCH

DUBBING

STANDBY/ON

RESET

BD/SD

STOP

REW

PLAY

PAUSE

REC

HDV/DV IN

HDD

REC

MODE

INPUT

SELECT

MIDIA SELECT

HDD

ONE TOUCH

DUBBING

BD/SD

HDV/DV IN

Memo:

Remove the protection cap of the cable before connecting.

Connecting via the USB terminal

Store the protection cap properly to prevent it from being

misplaced.

HDD

REC

OPEN/

REC

MODE

INPUT

SELECT

MIDIA SELECT

ONE TOUCH

DUBBING

STANDBY/ON

RESET

HDD

BD/SD

STOP

REW

PLAY

PAUSE

REC

HDV/DV IN

Connecting using an audio cable

HDD

REC

MODE

INPUT

SELECT

MIDIA SELECT

HDD

ONE TOUCH

DUBBING

BD/SD

HDV/DV IN

Memo:

Some video camera models may require an AC adapter

instead of batteries to run. For details, refer to the video

camera’s instruction manual.

Connecting a video deck or other

equipment (recording using this unit)

Memo:

When connecting using an S-video cable, change the

setting of “VIDEO INPUT SETTING” to “S-VIDEO”.

For more details, refer to

“VIDEO INPUT SETTING” (A page 81) .

To record video images played back on this unit to an

external device (video deck, etc.), connect the output

terminal of this unit to the input terminal of the external

device.

Preparation

Connecting External

Devices

Connecting the Power

Supply

Connect the supplied power cable to this unit as follows.

Connecting a wired remote control

Connect the supplied power cable to the AC IN

terminal of this unit

Using a wired connection enables stable control of this unit

from an external device.

Operation is possible using any code (1 to 4) regardless of

the remote control code settings of this unit.

Connect the other end of the power cable to a

power point

Press the [A] button on the remote control or

this unit to switch on the unit.

The power of this unit turns on, and a “HELLO” message

appears on the display window.

Memo:

There is currently no compatible remote control unit

available.

To create a wired remote controller, refer to “RS-232C

Note:

Interface” (A page 83) .

Do not use power cables other than that supplied with this

unit. Doing so may cause this unit to malfunction.

Connecting using a RS-232C cable (only

for SR-HD1500)

External operation is enabled by connecting a RS-232C cable

to a PC or similar device.

For details on external operation, refer to “RS-232C Interface”

(A page 83) .

Preparation

Select “CLOCK SET”, and press the [OK] button

The Clock Set menu screen appears.

Setting and Displaying

Date/Time

Set the date/time of the built-in clock as follows. The

recording date/time is stored on the disc.

5'672

%.1%-ꢀ5'6ꢁ&+52.#;

%.1%-ꢀ5'6

&#6'ꢀ&+52.#;

/106*ꢄ&#;ꢄ;'#4

ꢂꢃ*

6+/'ꢀ&+52.#;ꢀ%*1+%'

Setting the date/time

Set the date/time of the built-in clock as follows.

Press the [SET UP] button on the remote control unit

The Settings menu screen appears.

5'.'%6

':+6

4'6740

5'672

#761ꢀ219'4ꢀꢁ1((ꢂ

4'/16'ꢀ%10641.ꢀ%1&'

%.1%-ꢀ5'6ꢄ&+52.#;

2#0'.ꢀ&+52.#;ꢀ$4+)*60'55

37+%-ꢀ56#4672

1((

Set the time and date

Repeat the steps below to specify the time and date.

4'/16'ꢀ%10641.ꢀꢃ

① Press the [ J ] or [ K ] button, select the Clock Set

item, and press the [OK] button.

1((

$7<<'4ꢀ176276

&'(#7.6ꢀ5'66+0)

5QHVYCTGꢀ8GTUKQPꢀꢀꢀꢀꢀꢀꢀZZZZZꢅZZZZZꢅZZZZZ

5'672

%.1%-ꢀ5'6ꢁ&+52.#;

5'.'%6

':+6

%.1%-ꢀ5'6

5'672

4'6740

;'#4

/106*ꢁ&#;

6+/'

ꢂꢃꢃꢄ

,#0ꢁꢃꢅ

#/ꢅꢂꢆꢃꢃ

Select “SETUP”, and press the [OK] button

Select “CLOCK SET/DISPLAY”, and press the

[OK] button

“CLOCK SET/DISPLAY” menu screen appears.

'06'4

5'.'%6

':+6

5'672

4'6740

5'672

② Press the [ J ] or [ K ] button, change the setting

value, and press the [OK] button.

#761ꢀ219'4ꢀꢁ1((ꢂ

4'/16'ꢀ%10641.ꢀ%1&'

%.1%-ꢀ5'6ꢄ&+52.#;

2#0'.ꢀ&+52.#;ꢀ$4+)*60'55

37+%-ꢀ56#4672

1((

4'/16'ꢀ%10641.ꢀꢃ

1((

$7<<'4ꢀ176276

5'672

&'(#7.6ꢀ5'66+0)

%.1%-ꢀ5'6ꢁ&+52.#;

%.1%-ꢀ5'6

;'#4

/106*ꢁ&#;

6+/'

ꢃꢅꢅꢆ

,#0ꢁꢅꢂ

#/ꢂꢃꢄꢅꢅ

5'.'%6

':+6

5'672

4'6740

'06'4

5'.'%6

':+6

5'672

4'6740

Preparation

After setting is complete, select “ENTER”, and

press the [OK] button

Doing so exits date/time setting, and returns to the initial

screen.

Select “CLOCK SET/DISPLAY”, and press the

[OK] button

The Clock Set/Display menu screen appears.

5'672

#761ꢀ219'4ꢀꢁ1((ꢂ

4'/16'ꢀ%10641.ꢀ%1&'

%.1%-ꢀ5'6ꢄ&+52.#;

2#0'.ꢀ&+52.#;ꢀ$4+)*60'55

37+%-ꢀ56#4672

1((

4'/16'ꢀ%10641.ꢀꢃ

%.1%-ꢀ5'6ꢁ&+52.#;

%.1%-ꢀ5'6

1((

;'#4

/106*ꢁ&#;

6+/'

ꢂꢃꢃꢄ

$7<<'4ꢀ176276

,#0ꢁꢃꢅ

#/ꢅꢂꢆꢃꢃ

&'(#7.6ꢀ5'66+0)

'06'4

5'.'%6

':+6

5'672

4'6740

5'.'%6

':+6

5'672

4'6740

Select “DATE DISPLAY”, and press the [OK]

button

The Date Display menu screen appears.

Memo:

The value for seconds cannot be set. After setting the

minute, press the [SET UP] button according to the time

signal.

To cancel date/time setting, press the [RETURN] button.

Doing so cancels date/time setting and returns to the initial

screen.

5'672

%.1%-ꢀ5'6ꢁ&+52.#;

%.1%-ꢀ5'6

&#6'ꢀ&+52.#;

/106*ꢄ&#;ꢄ;'#4

ꢂꢃ*

The year can be set from 2009 to 2037.

6+/'ꢀ&+52.#;ꢀ%*1+%'

If "2037.12.31 PM11:59" is set, the time will change to

"2009.1.1 AM00:00" after one minute.

Changing the date display style

You can specify the display style of the date as follows.

5'.'%6

':+6

4'6740

5'672

Press the [SET UP] button on the remote control

unit

Select the date display style.

Select “SETUP”, and press the [OK] button

The Settings menu screen appears.

5'672

%.1%-ꢀ5'6ꢁ&+52.#;

%.1%-ꢀ5'6

;'#4ꢄ/106*ꢄ&#;

/106*ꢄ&#;ꢄ;'#4

&#;ꢄ/106*ꢄ;'#4

5'672

&#6'ꢀ&+52.#;

/106*ꢄ&#;ꢄ;'#4

6+/'ꢀ&+52.#;ꢀ%*1+%'

ꢂꢃ*

#761ꢀ219'4ꢀꢁ1((ꢂ

4'/16'ꢀ%10641.ꢀ%1&'

%.1%-ꢀ5'6ꢄ&+52.#;

2#0'.ꢀ&+52.#;ꢀ$4+)*60'55

37+%-ꢀ56#4672

1((

4'/16'ꢀ%10641.ꢀꢃ

1((

$7<<'4ꢀ176276

&'(#7.6ꢀ5'66+0)

5QHVYCTGꢀ8GTUKQPꢀꢀꢀꢀꢀꢀꢀZZZZZꢅZZZZZꢅZZZZZ

5'.'%6

':+6

5'672

4'6740

5'.'%6

':+6

5'672

4'6740

Select a date display style from the following items.

YEAR.MONTH.DAY : Displays the date in the year/month/

day order.

MONTH.DAY.YEAR : Displays the date in the month/day/

year order.

DAY.MONTH.YEAR : Displays the date in the day/month/

year order.

After selecting, press the [OK] button

The date display style will be saved.

Preparation

Select “TIME DISPLAY CHOICE”, and press the

[OK] button

Setting and Displaying

Date/Time (Continued)

Memo:

The Time Display menu screen appears

The date display style will be applied in the following

5'672

information displays.

%.1%-ꢀ5'6ꢁ&+52.#;

%.1%-ꢀ5'6

Recording date of the title that is shown in the playback

&#6'ꢀ&+52.#;

/106*ꢄ&#;ꢄ;'#4

ꢂꢃ*

navigation screen (The recording date will be shown in

place of the title if the title has not been input).

6+/'ꢀ&+52.#;ꢀ%*1+%'

Shooting date and time that is shown when AVCHD is

played back

Date that is displayed in the title information display

screen

5'.'%6

':+6

4'6740

5'672

Changing the time display style

You can specify the display style of the time as follows.

Select the time display style

Press the [SET UP] button on the remote control

unit

5'672

Select “SETUP”, and press the [OK] button

The Settings menu screen appears.

%.1%-ꢀ5'6ꢁ&+52.#;

%.1%-ꢀ5'6

&#6'ꢀ&+52.#;

/106*ꢄ&#;ꢄ;'#4

ꢂꢃ*

ꢃꢅ*

6+/'ꢀ&+52.#;ꢀ%*1+%'

5'672

#761ꢀ219'4ꢀꢁ1((ꢂ

4'/16'ꢀ%10641.ꢀ%1&'

%.1%-ꢀ5'6ꢄ&+52.#;

2#0'.ꢀ&+52.#;ꢀ$4+)*60'55

37+%-ꢀ56#4672

1((

4'/16'ꢀ%10641.ꢀꢃ

5'.'%6

':+6

1((

5'672

4'6740

$7<<'4ꢀ176276

&'(#7.6ꢀ5'66+0)

5QHVYCTGꢀ8GTUKQPꢀꢀꢀꢀꢀꢀꢀZZZZZꢅZZZZZꢅZZZZZ

Select from “12H” or “24H”.

12H: Displays the time in AM/PM format.

24H: Displays the time in 24-hour format.

5'.'%6

':+6

5'672

4'6740

After selecting, press the [OK] button

The time display style will be saved.

Select “CLOCK SET/DISPLAY”, and press the

[OK] button

The Clock Set/Display menu screen appears.

Memo:

The time display style applies to the following.

Current time

Date/time registered on the disc

Recording time of the title that is shown in the playback

navigation screen

5'672

#761ꢀ219'4ꢀꢁ1((ꢂ

4'/16'ꢀ%10641.ꢀ%1&'

%.1%-ꢀ5'6ꢄ&+52.#;

2#0'.ꢀ&+52.#;ꢀ$4+)*60'55

37+%-ꢀ56#4672

1((

(The recording time will be shown in place of the title if

the title has not been input.)

4'/16'ꢀ%10641.ꢀꢃ

1((

Shooting date and time that is displayed when AVCHD is

played back

$7<<'4ꢀ176276

&'(#7.6ꢀ5'66+0)

Time of recording that is displayed in the title information

display screen

5'.'%6

':+6

5'672

4'6740

Dubbing/Importing

Importing data from a SDHC/SD to the HDD

Dubbing/Importing

Bi-directional dubbing between the HDD and a BD/DVD is

possible using this unit alone. Also, data can be imported to

the HDD from a video camera by connecting it via i.LINK or

USB.

Videos captured using a video camera can be imported to the

HDD by inserting the SDHC/SD card that the videos are

saved on.

Importing data from a video camera to the

HDD

Videos captured using a video camera can be imported to the

HDD.

This unit supports video camera connections via i.LINK and

USB.

Dubbing from the HDD to a BD/DVD

High-speed dubbing

Select this option if you want to significantly shorten the time

required for dubbing. Make use of a BD/DVD disc that

supports high-speed recording.

Memo:

For MOV format videos, only videos in MOV format (SP

mode) taken using JVC ProHD camcorder GY-HM700/100

are compatible. There is no guarantee for importing videos

taken on devices by other company.

In addition, MOV videos cannot be imported using the SR-

HD1250.

Dubbing in a specific recording mode

Select this option when you want to specify the recording

mode for dubbing. Dubbing can be performed in the recording

mode of your preference, such as whether to “maintain a high

picture quality” or “save as many titles as possible”.

For more details, refer to “Recording Modes” (A page 28) .

HDD

Video Camera

Memo:

USB/SDHC/SD

MOV*

The image quality will not improve even when a recording

Deterioration-free

dubbing

(MOV*)

mode with image quality higher than that of the original

recording mode is chosen.

Encode dubbing

SD-VIDEO(HD)*

Dubbing using a specific recording mode will cause the disc

to be re-encoded.

HDV/DV

HDV

AF/AN/AL/AE

AVCHD

Other options for importing data into the

HDD

SD-VIDEO(SD)*

AVC

Importing data from a BD/DVD to the HDD

You can import titles from a BD/DVD.

L1 terminal

VIDEO/

XP/SP/LP/EP

JPEG

BD/DVD

S-VIDEO

HDD

JPEG

BDMV

BDAV

AF/AN/AL/AE

MOV*

: MOV files that are taken in SP mode using

the JVC ProHD Camcorder GY-

HM700/100

DVD

EverioBackup *

AVC

SD-VIDEO(HD)*: SD-VIDEO(JVC Everio MPEG2 TS)

SD-VIDEO(SD)* : SD-VIDEO(JVC Everio MPEG2 PS)

AVCHD

DVD-VR

Importing data from a video deck

You can import data to the HDD from an external video deck

by connecting it to a composite video or S input terminal.

For more details, refer to “Recording Using External Inputs”

(A page 47) .

XP/SP/LP/EP

JPEG

DVD-Video *

Deterioration-free

dubbing

EverioBackup

(JPEG)

Encode dubbing

Memo:

Videos that are copy-controlled cannot be imported.

BDAV

(BD-RE, JPEG)

Motion JPEG is not supported

DVD-video*

: Discs that are not finalized cannot be

imported.

EverioBackup* : Data disc containing high-definition videos

that are recorded in the MPEG2 format

using a DVD writer for Everio.

Dubbing/Importing

Dubbing chart

Dubbing the video data from the HDD

Dubbing

Quality

Format (BD)

Format (DVD)

Content

Quality

BDMV(HD Quality) BDAV(HD Quality) BDAV(SD Quality)

DVD-VR

DVD-VIDEO

DR (MOV*)

DR (Other)

AF/AN/AL/AE

AVC

High-speed dubbing High-speed dubbing / Re-encoding

Re-encoding

High-speed dubbing / Re-encoding

Re-encoding

High-speed dubbing High-speed dubbing / Re-encoding

Re-encoding

High-speed dubbing High-speed dubbing / Re-encoding

Re-encoding

High-speed dubbing / Re-encoding

Re-encoding

XP/SP/LP/EP*

High-speed dubbing / High-speed dubbing /

Re-encoding

Memo:

EP*

: High-speed dubbing to DVD-VIDEO format discs in EP mode title

To perform high-speed dubbing of a EP mode title to a DVD-VIDEO format disc, set “ HIGH-SPEED DUBBING ” (A

page 77) in the settings menu to “4:3” before recording or importing. Only re-encoding will be performed when

dubbing a title that is recorded or imported with a setting other than “4:3”.

MOV* : MOV files that are taken in SP mode using the JVC ProHD Camcorder GY-HM700/100

Dubbing the picture data from the HDD

Importing file

(HDD)

Media

BDAV(BD-RE) SDHC/SD

JPEG

Memo:

Video images may be distorted in the following situations during reencoding/dubbing when the monitor (TV) is connected to

this unit using a HDMI cable, or when the screen resolution is set to 1080p.

Proceeding with dubbing from the menu screen

Returning to the normal screen after dubbing has finished

This is not a malfunction. Change the screen resolution to a setting other than 1080p if you feel that this is annoying.

Dubbing/Importing

Formatting a disc

Formatting

Set the DVD or BD to be formatted on the disc

tray

Unused discs or SD cards may require formatting in some

cases.

Press the [MEDIA MANAGE] button on the

remote control unit

The Media Management menu screen appears.

When the need arises, format the disc or SD card

accordingly.

Memo:

Formatting a disc or SD card erases all existing data from

the media.

Double-check carefully before formatting so as not to erase

important titles.

/'&+#ꢀ/#0#)'/'06

$&ꢁ&8&

(14/#6

When using a DVD-R disc in the Video mode, formatting is

not required.

(+0#.+<'

4'0#/'ꢀ&+5%

5&ꢀ%#4&

(14/#6

Format chart

Refer to the following chart for the disc types and format

when formatting a disc.

$&ꢂ8+&'1ꢀ&#6#ꢀ'4#5'

*&&

(14/#6

Note:

If a disc is formatted using an equipment not manufactured

by JVC, the disc may not be read correctly even though it

corresponds to the chart below.

In this case, reformat the disc using this unit, or make use

of another blank disc.

Select “FORMAT” from “BD/DVD”

DVD : A format selection screen appears.

: A confirmation screen to execute formatting

appears.

Memo:

BD-R and DVD-R discs can only be formatted once.

Select a format mode from the format selection

screen

When a disc is re-formatted into another format, remove

the disc and load it again.

DVD format chart

Format

Video

Format

%10(+4/

6*'ꢀ&+5%ꢀ9+..ꢀ$'ꢀ(14/#66'&

5'.'%6ꢀ#ꢀ(14/#6ꢀ/1&'

DVD-RW Single-sided, single

layer (4.7 GB)

84ꢀ/1&'

8+&'1ꢀ/1&'

DVD-R

Single-sided, single

layer (4.7 GB)

V(*)

V (*)

Single-sided, dual layer

(8.5 GB)

V: Format supported.

DVD-RW : Select a “Format mode” from “VR MODE” or

“VIDEO MODE”.

* : Formatting not required.

Memo:

BD format chart

This screen does not appear when a BD or DVD-R disc is

Format

used.

BD-RE Single-sided, single layer (25 GB)

Single-sided, dual layer (50 GB)

BD-R

Single-sided, single layer (25 GB)

Single-sided, dual layer (50 GB)

V: Format supported.

Dubbing/Importing

Cancel formatting

Press the [OPTION] button while formatting

Formatting (Continued)

Select “YES”, and press the [OK] button in the

format confirmation screen

126+105

$#%-

5612

%10(+4/

6*'ꢀ&+5%ꢀ9+..ꢀ$'ꢀ(14/#66'&ꢀ+0ꢀ:::

#..ꢀ4'%14&'&ꢀ6+6.'5ꢀ9+..ꢀ$'ꢀ'4#5'&

+6ꢀ6#-'5ꢀ#$176ꢀ;;;ꢀ/+076'5

&1ꢀ;17ꢀ9#06ꢀ61ꢀ(14/#6!

;'5

(14/#6

ꢀꢁꢂ

;17ꢃ%#0ꢃ':+6ꢃ(41/ꢃ6*'ꢃ126+10ꢃ5%4''0

Select “STOP” and press the [OK] button

A confirmation screen to stop formatting appears.

Formatting starts.

Select “YES” on the confirmation screen and

press the [OK] button

After formatting is complete, a “THE DISC HAS BEEN

FORMATTED” message appears on the monitor, and the

normal screen is displayed.

%10(+4/

(14/#66+0)ꢂ9+..ꢂ$'ꢂ56122'&

5612!

%10(+4/

;'5

6*'ꢀ&+5%ꢀ*#5ꢀ$''0ꢀ(14/#66'&

(14/#6

ꢀꢀꢁ

;17ꢂ%#0ꢂ':+6ꢂ(41/ꢂ6*'ꢂ126+10ꢂ5%4''0

Formatting is stopped.

Note:

Memo:

Formatting can be stopped if it seems to take a long time

(more than two minutes).

To return to the initial screen without formatting the disc,

select “DO NOT FORMAT” and press the [OK] button.

Alternatively, you can press the [RETURN] button to return

to the initial screen without formatting.

If for any reason formatting cannot be stopped, the

confirmation screen for stopping formatting will not appear

even if the [OPTION] button is pressed.

Note:

Do not turn off the power or unplug the power cable when

the “FORMATTING DISC…” message is displayed.

Note that formatting a disc with copyright-protected titles

erases all the titles from the disc.

Dubbing/Importing

Select “YES”, and press the [OK] button

Formatting an SD Card

Insert the SD card to be formatted into the [SD

SLOT]

With the terminal side facing down, insert the SD card until

a “click” sound is heard.

%10(+4/

6*'ꢀ%#4&̉5ꢀ%106'06ꢀ9+..ꢀ$'ꢀ'4#5'&ꢀꢁ

&1ꢀ;17ꢀ9#06ꢀ61ꢀ56#46ꢀ(14/#66'&ꢀ!

;'5

Formatting starts.

Note:

After formatting is complete, a “THE SD CARD HAS BEEN

FORMATTED” message appears on the monitor, and the

normal screen is displayed.

Formatting cannot be performed if the SD card is write-

protected. In this case, turn off the write-protect lock before

inserting the SD card.

Memo:

To return to the initial screen without formatting the disc,

select “NO” and press the [OK] button.

Alternatively, you can press the [RETURN] button to return

to the initial screen without formatting.

Press the [MEDIA MANAGE] button on the

remote control unit

The Media Management menu screen appears.

Note:

Do not turn off the power or unplug the power cable when

the “FORMATTING SD CARD…” message is displayed. Do

not remove the SD card as well. Doing so may damage the

SD card.

/'&+#ꢀ/#0#)'/'06

$&ꢁ&8&

(14/#6

(+0#.+<'

4'0#/'ꢀ&+5%

5&ꢀ%#4&

Note that formatting a disc with copyright-protected titles

erases all the titles from the disc.

(14/#6

Once the formatting of the SD card begins, it cannot be

stopped.

$&ꢂ8+&'1ꢀ&#6#ꢀ'4#5'

*&&

(14/#6

Select “FORMAT” from “SD CARD”

A confirmation screen to execute formatting appears.

Dubbing/Importing

Recording Modes

Maximum recording time for each recording mode

You can specify a recording mode according to the intended use. Setting the video to a high picture quality shortens the

maximum recording time, while setting to a lower picture quality lengthens the recording time.

Refer to the following table for the maximum recording time in the respective modes. All figures shown in the table are

approximate values.

Recording

Mode

Quality

BD (Single-

sided, Single

Layer)

BD (Single-

sided, Dual

Layer)

DVD (Single-

sided, Single

Layer)

DVD (Single-

sided, Dual

Layer)

HDD (500 GB)

(*1)

40 hours (*2)

80 hours

4 hours

8 hours

6 hours

12 hours

18 hours

24 hours

10.5 hours

21 hours

42 hours

84 hours

126 hours

189 hours

252 hours

110 hours

222 hours

442 hours

887 hours

9 hours

12 hours

5.25 hours

10.5 hours

21 hours

42 hours

1 hours

2 hours

4 hours

8 hours

1.7 hours

3.5 hours

7.1 hours

14.3 hours

*1 : If the HDD capacity is 250 GB (SR-HD1250US model) the time will be approximately half of what is stated here.

*2 : An estimated figure when HDV is imported.

Memo:

DR mode

Abbreviation for Direct Recording. Videos are recorded in the original picture quality.

AF/AN/XP/SP mode

Recommended for recording images with fast motion, such as sports videos.

The AF/AN mode record images at the high-quality HD level.

The XP/SP modes record images at the high-quality SD level.

AL/AE/LP mode

Recommended for recording images with slow motion and little contrast, such as dramas.

AL/AE mode records images at the low-quality HD level.

LP mode records images at the low-quality SD level.

EP mode

Recommended for recording images with sharp outlines, such as animation videos, and when the recordable time (remaining

time) is limited.

HD picture quality

Using BD enables dubbing to be done with HD picture

quality. To dub HD picture quality titles that are imported in

the HDD, use BD.

FR mode

FR mode is displayed as the recording mode in the following

cases.

FR mode during import into HDD

Note:

During import of SD-VIDEO (JVC Everio MPEG2 PS) titles

via high-speed dubbing. During import of data via high-

speed dubbing from DVD-VR discs recorded using other

units.

Dubbing to a DVD cannot be done in HD picture quality.

DR mode

FR mode during dubbing from HDD

When selecting the most appropriate mode automatically

between XP and EP according to the remaining memory on

the disc.

HDV, MOV* and SD-VIDEO(JVC Everio MPEG2 TS) titles

are imported using DR mode.

MOV* : MOV files that are taken in SP mode using the JVC

ProHD Camcorder GY-HM700/100

Dubbing/Importing

i.LINK device : “HDV/DV RDY”

Importing Data to the HDD

Using the ONE TOUCH

DUBBING Button

Titles can be imported to the HDD from an SD card or device

connected to the USB or i.LINK terminal simply by pressing

the [ONE TOUCH DUBBING] button.

USB device

SD card

: “USB RDY”

: “SD RDY”

Press the [ONE TOUCH DUBBING] button on the

unit

One-touch importing starts.

File formats that can be imported

① USB connection device, SD card

AVCHD, SD-VIDEO(JVC Everio MPEG2 TS, PS), MOV*,

and JPEG

MOV* : MOV files that are taken in SP mode using the

JVC ProHD Camcorder GY-HM700/100

② i.LINK-connected device

DV and HDV content

Memo:

Refer to the following for the flow of operations by the

system of this unit.

Data is searched according to the order of priority listed

below when multiple devices are connected to this unit.

USB h SD card h i.LINK

Data is retrieved only from the first device and imported to

the HDD. Connect only the device that contains data you

want to import to the HDD.

System checks the device connection

The system of this unit detects the connected device.

Search for devices is performed in the sequence of USB,

SD card, followed by i.LINK.

The i.LINK connected device can only be used to import

from tape media.

System detects the titles to import

All titles that can be imported will be detected and imported.

All video files (scenes) imported using “ONE TOUCH

DUBBING” are combined into one title.

This unit does not support combining of titles during the

editing operation after import is complete. To combine and

import data, select “ONE TOUCH DUBBING”.

Importing of titles by this unit starts

After titles are successfully imported, a

“DUBBING IS COMPLETED” message appears

on the monitor

Titles of two or more scenes cannot be combined if the

recording criteria, such as video size, are different.

Import of MOV files recorded using JVC GY-HM700/100

SP mode 1080i (25 Mbps) requires a duration that is about

1.3 times longer than the usual time.

%10(+4/

When importing DV contents with shooting date/time

&7$$+0)ꢀ+5ꢀ%1/2.'6'&

information, the date/time information at the beginning of

the contents will be taken as the shooting date/time

information. For HDV contents or DV contents without

shooting date/time information, the importing date/time will

be taken as the shooting date/time information.

Note:

Do not unplug the cable while importing to the HDD is in progress.

Doing so may result in loss or damage of the titles.

Memo:

For MOV format videos, only videos in MOV format (SP

The following buttons are enabled when importing is in

progress.

[ A ]

mode) taken using JVC ProHD camcorder GY-HM700/100

are compatible. There is no guarantee for importing videos

taken on devices by other company.

In addition, MOV videos cannot be imported using the SR-

HD1250.

: Continues importing while switching this

unit to the Standby mode.

[ONE TOUCH : Press this button for three seconds or

DUBBING]

longer to cancel importing.

Only titles that are not copyright-protected can be imported.

Recognizing the device and importing the files may take a long

time depending on the amount of files in the device or media.

[OPTION]

: Displays a pop-up menu for canceling

importing.

[ON SCREEN] : Pressing this button each time displays or

hides the importing information.

Procedure for one-touch importing

Connect the device to be used. Alternatively,

insert an SD card.

Once preparations for importing have been done, the

Note:

Importing stops and a message appears on the monitor if

an error occurs during the importing process.

message below will be shown on this unit’s display window.

Dubbing/Importing

Full import

Importing Data from a BD/

DVD to the HDD

Select “FULL IMPORT” in the import selection

screen, and press the [OK] button

A check mark is added to the “FULL IMPORT” item.

Data can be imported from a BD/DVD to the HDD as follows.

File formats that can be imported

Select “NEXT”, and press the [OK] button

BD-MV, BD-AV, AVCHD, DVD-VR, DVD-VIDEO,

EverioBackup, and JPEG

&7$$+0)

56'2

Memo:

5'.'%6ꢀ6*'ꢀ/'6*1&ꢀ1(ꢀ+/2146

Titles that are imported using “FULL IMPORT” combined

into one title.

&+5%

*&&

This unit does not support combining of titles during the

editing operation after import is complete. To combine and

import data, select “FULL IMPORT”.

(7..ꢀ+/2146

5'.ꢁꢀ6+6.'ꢂ8+&'1ꢃ

For data that is selected for import via “SEL.

5'.ꢁꢀ6+6.'ꢂ2+%674'ꢃ

TITLE(VIDEO)”, titles with the same date are combined.

%#0%'.

$#%-

0':6

Titles of two or more scenes cannot be combined if the

recording criteria, such as video size, are different.

5'.'%6

126+10

':+6

&7$$+0)

4'6740

Note:

Only titles that are not copyright-protected can be imported.

“START” will appear instead of “NEXT” in the menu if the

disc is of a format other than “BD-AV”. In this case, go to

Step 5.

Recognizing the device and importing the files may take a

long time depending on the amount of files in the device.

Select “RECORDING MODE”, and press the [OK]

button

A pop-up menu appears.

Preparations

Set a BD or DVD on the disc tray

Press the [DUBBING] button on the remote

control unit

The importing screen appears.

Select the “RECORDING MODE” option

&7$$+0)

56'2

&7$$+0)

5'6ꢀ6*'ꢀ4'%14&+0)ꢀ/1&'

56'2

5'.'%6ꢁ+/2146ꢀ&7$$+0)

&+5%

*&&

61ꢁ*&&

75$

61ꢁ&8&

&+5%

*&&

8+&'1

4'%14&+0)ꢀ/1&'

&+5%ꢀ5&

2+%674'

&+5%

*&8ꢀ&8

&+5%ꢁ%12;

&+5%

%#0%'.

$#%-

56#46

5'.'%6

126+10

':+6

&7$$+0)

4'6740

%#0%'.

0':6

5'.'%6

126+10

':+6

&7$$+0)

4'6740

For more details, refer to “Recording Modes” (A page 28) .

Select “DISChHDD” in the importing screen, and

press the [OK] button

A check mark is added to the “DISChHDD” item.

Select “NEXT”, and press the [OK] button

The import selection screen appears.

Memo:

A recording mode selection appears instead of the import

selection screen when DVD-VIDEO is detected.

For more details, refer to “Importing DVD-VIDEO” (A page

32) .

Dubbing/Importing

Select “RECORDING MODE”, and press the [OK]

button

A pop-up menu appears.

Select “START”, and press the [OK] button

Importing of the titles starts.

After titles are successfully imported, a “DUBBING IS

COMPLETED” message appears on the monitor.

&7$$+0)

56'2

5'6ꢀ6*'ꢀ4'%14&+0)ꢀ/1&'

&+5%

*&&

%10(+4/

4'%14&+0)ꢀ/1&'

&7$$+0)ꢀ+5ꢀ%1/2.'6'&

%#0%'.

$#%-

0':6

5'.'%6

126+10

':+6

&7$$+0)

4'6740

Select the “RECORDING MODE” option.

For more details, refer to “Recording Modes” (A page 28) .

Specify a title

Select “NEXT”, and press the [OK] button

A screen for creating the import title list appears.

Select “SEL. TITLE(VIDEO)” in the import

selection screen, and press the [OK] button

Create an import title list

Follow the steps below to create an import title list.

A check mark is added to the “SEL. TITLE(VIDEO)” item.

① Select “ADD TITLE LIST FOR DUBBING”, and press

the [OK] button

Select “NEXT”, and press the [OK] button

The Title List screen is displayed.

② Select the titles to import, and press the [OK] button

Titles selected are added to the list.

&7$$+0)

56'2

5'.'%6ꢀ6*'ꢀ/'6*1&ꢀ1(ꢀ+/2146

Memo:

&+5%

*&&

Press the [MARK] button. A check mark will appear beside

the title.

(7..ꢀ+/2146

5'.ꢁꢀ6+6.'ꢂ8+&'1ꢃ

All titles with a check mark can be added to the list at the

same time.

5'.ꢁꢀ6+6.'ꢂ2+%674'ꢃ

Select a title from the dubbing title list, and press the [OK]

button to perform the following changes.

%#0%'.

$#%-

0':6

5'.'%6

126+10

':+6

Delete the selected title from the list

&7$$+0)

4'6740

Thumbnails may not be displayed during title selection

depending on the discs used.

If a “BD-AV” disc is set, a recording mode selection screen

will appear.

If the disc is of a format other than “BD-AV”, a screen for

creating an import title list will appear. Go to step 5.

Dubbing/Importing

Select “RECORDING MODE”, press the [OK]

button, and select “RECORDING MODE” from

the recording mode selection screen

Importing Data from a BD/

DVD to the HDD

Select the “RECORDING MODE” option.

(Continued)

&7$$+0)

56'2

Select “START”, and press the [OK] button

5'6ꢀ6*'ꢀ4'%14&+0)ꢀ/1&'

&7$$+0)

56'2

&+5%

*&&

2.'#5'ꢂ%4'#6'ꢂ#ꢂ6+6.'ꢂ.+56ꢂ(14ꢂ+/2146

&+5%

*&&

4'%14&+0)ꢀ/1&'

#$%

5RQTVUꢀꢀ

%QQMKPIꢁꢁꢁ

-+&5ꢂ914.&

0GYUꢂ###

4GRQTV

%#0%'.

$#%-

56#46

5'.'%6

126+10

':+6

(.19'4ꢂ.'5510ꢂꢃ

&7$$+0)

4'6740

#&&ꢂ6+6.'ꢂ.+56ꢂ(14ꢂ&7$$+0)

$#%-

%#0%'.

56#46

5'.'%6

For more details, refer to “Recording Modes” (A page 28) .

':+6

&7$$+0)

126+10

4'6740

Select “START”, and press the [OK] button

Importing of the titles starts.

Importing of titles starts according to the sequence in the

created title list.

After titles are successfully imported, a “DUBBING IS

COMPLETED” message appears on the monitor.

After titles are successfully imported, a “DUBBING IS

COMPLETED” message appears on the monitor.

%10(+4/

&7$$+0)ꢀ+5ꢀ%1/2.'6'&

%10(+4/

&7$$+0)ꢀ+5ꢀ%1/2.'6'&

Memo:

If the first play setting of the DVD-video has been set to top

Note:

menu or other settings, the title will not playback.

If playback does not start, press the play button or playback

the DVD-Video.

“START” cannot be selected for the following cases.

A title that cannot be dubbed has been selected

HDD memory is insufficient

The amount of titles in the HDD has reached the

maximum amount

Canceling importing

A dubbing title list has not been created

To cancel importing before it starts

Select “CANCEL” from the menu, and press the [OK]

button to cancel importing of a title.

Importing DVD-VIDEO

When DVD-VIDEO is detected, a recording mode selection

screen appears.

Alternatively, you can press the [RETURN] button to cancel

importing and return to the initial screen.

Follow the steps below to import DVD-VIDEO to the HDD.

To cancel importing while it is in progress

Press the [OPTION] button to display the pop-up menu.

Select “CANCEL” from the pop-up menu and press the

[OK] button. Data will be written onto the disc up to the

point where import is cancelled.

Importing will also be stopped when the [o] button is

pressed to stop playback.

Dubbing/Importing

Preparations

Connect the USB device (Everio, etc.) to this unit

using a USB cable

Importing Data from a USB-

compatible Device to the

HDD

REC

OPEN/

REC

MODE

INPUT

SELECT

MIDIA SELECT

ONE TOUCH

DUBBING

STANDBY/ON

RESET

HDD

BD/SD

STOP

REW

PLAY

PAUSE

REC

HDV/DV IN

Data on devices connected to the USB terminal can be

imported to the HDD as follows.

HDD

REC

MODE

INPUT

SELECT

MIDIA SELECT

HDD

ONE TOUCH

DUBBING

BD/SD

File formats that can be imported

HDV/DV IN

AVCHD, SD-VIDEO(JVC Everio MPEG2 TS, PS), MOV*,

and JPEG

MOV* : MOV files that are taken in SP mode using the

JVC ProHD Camcorder GY-HM700/100

Memo:

Titles that are imported using “FULL IMPORT” combined

into one title. This unit does not support combining of titles

during the editing operation after import is complete. To

combine and import data, select “FULL IMPORT”.

Memo:

After connecting the USB cable, turn on the camera and

switch the mode of the camera.

(Choose "Connect to a computer" or a similar option. For

For data that is selected for import via “SEL.

TITLE(VIDEO)”, titles with the same date are combined.

details refer to the camera’s instruction manual.)

“USB RDY” appears on the display window of the unit when

an USB device is recognized.

Titles of two or more scenes cannot be combined if the

recording criteria, such as video size, are different.

Press the [DUBBING] button on the remote

control unit

The importing screen appears.

Import of MOV files recorded using JVC GY-HM700/100

SP mode 1080i (25 Mbps) requires a duration that is about

1.3 times longer than the usual time.

Note:

&7$$+0)

56'2

Turn off the power for this unit and the connecting device if

an USB compatible device is to be connected to this unit.

Do not unplug the USB cable while importing a title.

Doing so may result in loss or damage of the titles.

Only titles that are not copyright-protected can be imported.

For MOV format videos, only videos in MOV format (SP

5'.'%6ꢁ+/2146ꢀ&7$$+0)

61ꢁ*&&

75$

61ꢁ&8&

&+5%

*&&

8+&'1

&+5%ꢀ5&

2+%674'

&+5%

*&8ꢀ&8

&+5%ꢁ%12;

&+5%

mode) taken using JVC ProHD camcorder GY-HM700/100

are compatible. There is no guarantee for importing videos

taken on devices by other company.

&+5%

%#0%'.

0':6

In addition, MOV videos cannot be imported using the SR-

5'.'%6

126+10

':+6

HD1250.

&7$$+0)

4'6740

Recognizing the device and importing the files may take a

long time depending on the amount of files in the USB

Select “USBhHDD” in the importing screen, and

press the [OK] button

A check mark is added to the “USBhHDD” item.

device.

If a USB connection is used, this unit will only recognize one

device out of all the recording devices.

Depending on the video camera, the memory card slot will be

recognized but the internal device will not be recognized.

Use the following methods to solve this.

Select “NEXT”, and press the [OK] button

The import selection screen appears.

If the internal device is not recognized:

Copy the data from the camera’s internal memory or

HDD onto the SD card.

Full import

Select “FULL IMPORT” in the import selection

screen, and press the [OK] button

A check mark is added to the “FULL IMPORT” item.

If using a JVC camcorder that has two memory card

slots:

Put the memory card that has the required data in slot A.

If the target device is not recognized using the USB

connection, use the camcorder's burner or a similar device

to dub the disc before proceeding with dubbing on this unit.

For more details, refer to “Importing Data from a BD/DVD to

the HDD” (A page 30) .

Select “START”, and press the [OK] button

&7$$+0)

56'2

When importing videos from a USB-connected camcorder,

5'.'%6ꢀ6*'ꢀ/'6*1&ꢀ1(ꢀ+/2146

data reading from the internal memory of the camcorder

may fail. If both the camcorder’s internal memory and SD

card are available, the SD card may be detected first. To

prevent this from occurring, remove the SD card before

reading data from the internal memory.

75$

*&&

(7..ꢀ+/2146

5'.ꢁꢀ6+6.'ꢂ8+&'1ꢃ

5'.ꢁꢀ6+6.'ꢂ2+%674'ꢃ

%#0%'.

$#%-

56#46

5'.'%6

126+10

':+6

&7$$+0)

4'6740

Dubbing/Importing

Select “START”, and press the [OK] button

Importing Data from a USB-

compatible Device to the

HDD (Continued)

&7$$+0)

56'2

2.'#5'ꢄ%4'#6'ꢄ#ꢄ6+6.'ꢄ.+56ꢄ(14ꢄ+/2146

75$

*&&

ꢀꢁꢁꢂꢃꢄꢅꢃꢆꢁꢄ2/ꢆꢆꢇꢁꢁ

ꢀꢁꢁꢂꢃꢄꢅꢃꢆꢁꢄ2/ꢆꢁꢇꢈꢁ

ꢀꢁꢁꢂꢃꢄꢅꢃꢆꢁꢄ2/ꢆꢁꢇꢁꢁ

ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢂꢇꢈꢁ

ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢂꢇꢁꢁ

ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢅꢇꢈꢁ

ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢅꢇꢁꢁ

Importing of the titles starts.

After titles are successfully imported, a “DUBBING IS

COMPLETED” message appears on the monitor.

#&&ꢄ6+6.'ꢄ.+56ꢄ(14ꢄ&7$$+0)

$#%-

%#0%'.

56#46

5'.'%6

':+6

&7$$+0)

126+10

4'6740

%10(+4/

Importing of titles starts according to the sequence in the

created title list.

&7$$+0)ꢀ+5ꢀ%1/2.'6'&

After titles are successfully imported, a “DUBBING IS

COMPLETED” message appears on the monitor.

Specify a title

%10(+4/

&7$$+0)ꢀ+5ꢀ%1/2.'6'&

Select “SEL. TITLE(VIDEO)” in the import

selection screen, and press the [OK] button

A check mark is added to the “SEL. TITLE(VIDEO)” item.

Select “NEXT”, and press the [OK] button

&7$$+0)

56'2

5'.'%6ꢀ6*'ꢀ/'6*1&ꢀ1(ꢀ+/2146

Note:

“START” cannot be selected for the following cases.

75$

*&&

A title that cannot be dubbed has been selected

HDD memory is insufficient

(7..ꢀ+/2146

5'.ꢁꢀ6+6.'ꢂ8+&'1ꢃ

The amount of titles in the HDD has reached the

maximum amount

5'.ꢁꢀ6+6.'ꢂ2+%674'ꢃ

A dubbing title list has not been created

%#0%'.

$#%-

0':6

5'.'%6

126+10

':+6

&7$$+0)

4'6740

Canceling importing

A screen for creating the import title list appears.

To cancel importing before it starts

Select “CANCEL” from the menu, and press the [OK]

Create an import title list

Follow the steps below to create an import title list.

button to cancel importing of a title.

① Select “ADD TITLE LIST FOR DUBBING”, and press

the [OK] button

The Title List screen is displayed.

② Select the titles to import, and press the [OK] button

Titles selected are added to the list.

Alternatively, you can press the [RETURN] button to cancel

importing and return to the initial screen.

To cancel importing while it is in progress

Press the [OPTION] button. Select “CANCEL” from the

Cancel Importing menu, and press the [OK] button. Doing

so imports data to the HDD up to the position where you

have chosen to stop.

Memo:

Press the [MARK] button. A check mark will appear beside the

title.

All titles with a check mark can be added to the list at the

same time.

You can perform the following editing operations by selecting a

title from the dubbing title list and pressing the [OK] button.

Delete the selected title from the list

Thumbnails will not be displayed when a title is selected.

Dubbing/Importing

Select “SDhHDD” in the importing screen, and

Importing Data from an SD

Card to the HDD

press the [OK] button

A check mark is added to the “SDhHDD” item.

Select “NEXT”, and press the [OK] button

The import selection screen appears.

Data can be imported from a SD (SDHC) card to the HDD as follows.

File formats that can be imported

AVCHD, SD-VIDEO(JVC Everio MPEG2 TS, PS), MOV*,

and JPEG

Full import

MOV* : MOV files that are taken in SP mode using the

JVC ProHD Camcorder GY-HM700/100

Select “FULL IMPORT” in the import selection

screen, and press the [OK] button

A check mark is added to the “FULL IMPORT” item.

Memo:

Titles that are imported using “FULL IMPORT” combined

Select “START”, and press the [OK] button

into one title. This unit does not support combining of titles

during the editing operation after import is complete. To

combine and import data, select “FULL IMPORT”.

For data that is selected for import via “SEL.

TITLE(VIDEO)”, titles with the same date are combined.

&7$$+0)

56'2

5'.'%6ꢀ6*'ꢀ/'6*1&ꢀ1(ꢀ+/2146

Titles of two or more scenes cannot be combined if the

*&&

recording criteria, such as video size, are different.

Import of MOV files recorded using JVC GY-HM700/100

(7..ꢀ+/2146

5'.ꢁꢀ6+6.'ꢂ8+&'1ꢃ

SP mode 1080i (25 Mbps) requires a duration that is about

1.3 times longer than the usual time.

5'.ꢁꢀ6+6.'ꢂ2+%674'ꢃ

Note:

Do not remove the SD card when importing of the titles is in

%#0%'.

$#%-

56#46

progress or when the importing screen is displayed.

Doing so may result in loss or damage of the titles.

5'.'%6

126+10

':+6

&7$$+0)

4'6740

For MOV format videos, only videos in MOV format (SP

mode) taken using JVC ProHD camcorder GY-HM700/100

are compatible. There is no guarantee for importing videos

taken on devices by other company. In addition, MOV

videos cannot be imported using the SR-HD1250.

Importing of the titles starts.

After titles are successfully imported, a “DUBBING IS

COMPLETED” message appears on the monitor.

Only titles that are not copyright-protected can be imported.

Preparations

Insert the SD (SDHC) card into the [SD SLOT]

%10(+4/

&7$$+0)ꢀ+5ꢀ%1/2.'6'&

Memo:

“SD RDY” appears on the display window of the unit when

Choose “BACK” from the menu and press the [OK] button

to return to the previous screen.

an SD card is recognized.

Press the [DUBBING] button on the remote

control unit

The importing screen appears.

&7$$+0)

56'2

5'.'%6ꢁ+/2146ꢀ&7$$+0)

61ꢁ*&&

75$

61ꢁ&8&

&+5%

*&&

8+&'1

&+5%ꢀ5&

2+%674'

&+5%

*&8ꢀ&8

&+5%ꢁ%12;

&+5%

%#0%'.

0':6

5'.'%6

':+6

&7$$+0)

126+10

4'6740

Dubbing/Importing

Importing Data from an SD

Card to the HDD

&7$$+0)

56'2

2.'#5'ꢄ%4'#6'ꢄ#ꢄ6+6.'ꢄ.+56ꢄ(14ꢄ+/2146

*&&

(Continued)

ꢀꢁꢁꢂꢃꢄꢅꢃꢆꢁꢄ2/ꢆꢆꢇꢁꢁ

ꢀꢁꢁꢂꢃꢄꢅꢃꢆꢁꢄ2/ꢆꢁꢇꢈꢁ

ꢀꢁꢁꢂꢃꢄꢅꢃꢆꢁꢄ2/ꢆꢁꢇꢁꢁ

ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢂꢇꢈꢁ

ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢂꢇꢁꢁ

ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢅꢇꢈꢁ

ꢀꢁꢁꢂꢃꢄꢅꢃꢄꢂꢄ#/ꢄꢅꢇꢁꢁ

Specify a title

Select “SEL. TITLE(VIDEO)” in the import

selection screen, and press the [OK] button

#&&ꢄ6+6.'ꢄ.+56ꢄ(14ꢄ&7$$+0)

$#%-

%#0%'.

56#46

A check mark is added to the “SEL. TITLE(VIDEO)” item.

5'.'%6

':+6

&7$$+0)

126+10

4'6740

Select “NEXT”, and press the [OK] button

Importing of titles starts according to the sequence in the

created title list.

&7$$+0)

56'2

5'.'%6ꢀ6*'ꢀ/'6*1&ꢀ1(ꢀ+/2146

After titles are successfully imported, a “DUBBING IS

COMPLETED” message appears on the monitor.

*&&

(7..ꢀ+/2146

5'.ꢁꢀ6+6.'ꢂ8+&'1ꢃ

5'.ꢁꢀ6+6.'ꢂ2+%674'ꢃ

%10(+4/

%#0%'.

$#%-

0':6

&7$$+0)ꢀ+5ꢀ%1/2.'6'&

5'.'%6

126+10

':+6

&7$$+0)

4'6740

A screen for creating the import title list appears.

Create an import title list

Follow the steps below to create an import title list.

① Select “ADD TITLE LIST FOR DUBBING”, and press

the [OK] button

The Title List screen is displayed.

Memo:

Choose “BACK” from the menu and press the [OK] button

to return to the previous screen.

Note:

② Select the titles to import, and press the [OK] button

Titles selected are added to the list.

Memo:

“START” cannot be selected for the following cases.

Press the [MARK] button. A check mark will appear beside

A title that cannot be dubbed has been selected

the title.

HDD memory is insufficient

All titles with a check mark can be added to the list at the

same time.

The amount of titles in the HDD has reached the

maximum amount

You can perform the following editing operations by

selecting a title from the dubbing title list and pressing the

[OK] button.

A dubbing title list has not been created

Thumbnails will not be displayed when a title is selected.

Delete the selected title from the list

When there are files of different formats (AVCHD, SD-

VIDEO, MOV*) in the SD card, press the [RED] button to

select the format you want to display.

Canceling importing

To cancel importing before it starts

Select “CANCEL” from the menu, and press the [OK]

MOV*: MOV files that are taken in SP mode using the JVC

ProHD Camcorder GY-HM700/100

button to cancel importing of a title.

Alternatively, you can press the [RETURN] button to cancel

importing and return to the initial screen.

Select “START”, and press the [OK] button

To cancel importing while it is in progress

Press the [OPTION] button. Select “CANCEL” from the

Cancel Importing menu, and press the [OK] button. Doing

so imports data to the HDD up to the position where you

have chosen to stop.

Dubbing/Importing

Memo:

Importing Data from an

i.LINK-compatible Device to

the HDD

After the device (camera, etc.) has been connected using

an i.Link cable, turn on the power of the device and switch

it to playback mode. (refer to the device's (camera, etc.)

instruction manual for more details.)

“HDV/DV RDY” appears on the display window of the unit

when an iLINK device is recognized.

Data on devices connected to the i.LINK terminal can be

imported to the HDD as follows.

Press the [DUBBING] button on the remote

control unit

The importing screen appears.

Video formats that can be imported:

DV and HDV content

Memo:

Only titles that are not copyright-protected can be imported.

Devices that have in-built copyright protection such as D-VHS and digital

&7$$+0)

56'2

tuners cannot be connected. This unit only allows import from tape media.

Importing will not be performed if no tape has been inserted

into the HDV/DV camera.

Importing will be cancelled when the mode is changed from

HDV to DV or vice versa.

For camcorders that support both HDV and DV recording, use

only one of the modes for recording and playback.

There is no support for editing using a connected PC.

5'.'%6ꢁ+/2146ꢀ&7$$+0)

61ꢁ*&&

75$

61ꢁ&8&

&+5%

*&&

8+&'1

&+5%ꢀ5&

2+%674'

&+5%

*&8ꢀ&8

&+5%ꢁ%12;

&+5%

Only one i.LINK device can be connected to this unit at a time.

When importing DV contents with shooting date/time

information, the date/time information at the beginning of the

contents will be taken as the shooting date/time information.

For HDV contents or DV contents without shooting date/time

information, the importing date/time will be taken as the

shooting date/time information.

%#0%'.

0':6

5'.'%6

126+10

':+6

&7$$+0)

4'6740

Select “HDV/DVhHDD” in the importing screen,

and press the [OK] button

A check mark is added to the “HDV/DVhHDD” item.

Note:

Turn off the power for this unit and the connecting device

when connecting using an i.LINK compatible device.

Select “NEXT”, and press the [OK] button

The import selection screen appears.

Do not unplug the i.LINK cable while importing to the HDD is in progress.

Doing so may result in loss or damage of the titles.

For example, during full import of HDV content from JVC GY-

HD100 via i.LINK connection, the beginning of the image may

not be captured if GY-HD100 is not set as follows.

(1) Set the [IEEE1394] switch at the rear of the GY-HD100

unit to [HDV] or [DV] according to the recorded content.

(2) Set [MENU]/[VIDEO FORMAT]/[PB TAPE] on the GY-

HD100 unit to [HDV] or [DV].

Imports data from the beginning

You can import videos from the beginning till the end as

follows. If the current position is halfway through the tape,

import after rewinding the tape to the beginning.

(As with (1), set according to the recorded content. Setting to

[AUTO] is not allowed.)

Select “IMPORT FROM BEGINNING”, and press

the [OK] button

A check mark is added to the “IMPORT FROM

BEGINNING” item.

(3) Check to ensure that the [HDV] or [DV] lamp on the side of

the GY-HD100 unit is lit.

(Check to ensure that the lamp that is lit corresponds to the

setting in (1) and (2).)

When importing from a tape that contains data captured in the

HDV recording and DV recording modes, change the video

camera setting according to each recording mode, check to

ensure that the corresponding lamp in (3) is lit, and choose to

start import from the current position.

Select “NEXT”, and press the [OK] button

&7$$+0)

56'2

5'.'%6ꢁ6*'ꢁ/'6*1&ꢁ1(ꢁ+/2146

Preparations

*&8ꢀ&8

*&&

Connect the device (camera, etc.) to this unit

using an i.LINK cable

+/2146ꢁ(41/ꢁ$')+00+0)

+/2146ꢁ(41/ꢁ%744'06ꢁ215+6+10

HDD

REC

OPEN/

REC

MODE

INPUT

SELECT

MIDIA SELECT

HDD BD/SD

ONE TOUCH

DUBBING

STANDBY/ON

RESET

STOP

REW

PLAY

PAUSE

REC

HDV/DV IN

HDD

REC

MODE

INPUT

SELECT

MIDIA SELECT

HDD BD/SD

ONE TOUCH

DUBBING

%#0%'.

$#%-

0':6

5'.'%6

126+10

4'6740

':+6

HDV/DV IN

&7$$+0)

A recording mode selection screen appears.

Select “RECORDING MODE”, press the [OK]

button, and select from the pop-up menu

Dubbing/Importing

Select “RECORDING MODE” and press the [OK]

button to display the pop-up menu

Select “XP”, “SP”, “LP”, or “EP” from the “RECORDING

MODE” option.

Importing Data from an

i.LINK-compatible Device to

the HDD (Continued)

&7$$+0)

56'2

Select “XP”, “SP”, “LP”, or “EP” from the “RECORDING

5'6ꢁ6*'ꢁ4'%14&+0)ꢁ/1&'

MODE” option.

*&8ꢀ&8

*&&

&7$$+0)

56'2

5'6ꢁ6*'ꢁ4'%14&+0)ꢁ/1&'

4'%14&+0)ꢁ/1&'

*&8ꢀ&8

*&&

&7$$+0)ꢁ(14ꢁ*&8ꢁ6#2'ꢁ%106'065ꢁꢂꢂ ꢁ&4ꢁ/1&'ꢃꢁ&8ꢁ%106'065ꢁꢂꢂ ꢁ52'%+(+'&ꢁ4'%ꢁ/1&'

%#0%'.

$#%-

56#46

4'%14&+0)ꢁ/1&'

5'.'%6

126+10

':+6

&7$$+0)

4'6740

&7$$+0)ꢁ(14ꢁ*&8ꢁ6#2'ꢁ%106'065ꢁꢂꢂ ꢁ&4ꢁ/1&'ꢃꢁ&8ꢁ%106'065ꢁꢂꢂ ꢁ52'%+(+'&ꢁ4'%ꢁ/1&'

%#0%'.

$#%-

56#46

Memo:

5'.'%6

126+10

':+6

HDV contents will be imported in DR mode.

&7$$+0)

4'6740

For more details, refer to “Recording Modes” (A page 28) .

Memo:

Select “START”, and press the [OK] button

Importing of the titles starts.

HDV contents will be imported in DR mode.

For more details, refer to “Recording Modes” (A page 28) .

After titles are successfully imported, a “DUBBING IS

COMPLETED” message appears on the monitor.

Select “START”, and press the [OK] button

Importing of the titles starts.

After titles are successfully imported, a “DUBBING IS

COMPLETED” message appears on the monitor.

%10(+4/

&7$$+0)ꢀ+5ꢀ%1/2.'6'&

%10(+4/

&7$$+0)ꢀ+5ꢀ%1/2.'6'&

Cancel dubbing

To cancel importing before it starts

Select “CANCEL” from the menu, and press the [OK]

Imports data from current position

You can import videos from the current tape position till the

end as follows.

button to cancel importing of a title.

Alternatively, you can press the [RETURN] button to cancel

importing and return to the initial screen.

Select “IMPORT FROM CURRENT POSITION”,

and press the [OK] button

A check mark is added to the “IMPORT FROM CURRENT

POSITION” item.

To cancel importing while it is in progress

Press the [OPTION] button. Select “CANCEL” from the

Cancel Importing menu, and press the [OK] button. Doing

so imports data to the HDD up to the position where you

have chosen to stop.

Select “NEXT”, and press the [OK] button

&7$$+0)

56'2

5'.'%6ꢁ6*'ꢁ/'6*1&ꢁ1(ꢁ+/2146

*&8ꢀ&8

*&&

+/2146ꢁ(41/ꢁ$')+00+0)

+/2146ꢁ(41/ꢁ%744'06ꢁ215+6+10

%#0%'.

$#%-

0':6

5'.'%6

126+10

4'6740

':+6

&7$$+0)

A recording mode selection screen appears.

Dubbing/Importing

On this screen, select “DISCiVIDEO”

Dubbing a Title from the

HDD to a BD/DVD

&7$$+0)

56'2

5'.'%6ꢁ+/2146ꢀ&7$$+0)

61ꢁ*&&

75$

Titles stored in the internal HDD can be dubbed to a BD/DVD

as follows.

61ꢁ&8&

&+5%

*&&

8+&'1

Memo:

&+5%ꢀ5&

2+%674'

Disc types that can be used for dubbing with this unit are:

BD-RE, BD-R, DVD-RW, and DVD-R.

&+5%

*&8ꢀ&8

&+5%ꢁ%12;

&+5%

For more details, refer to “Discs that enable both dubbing and

&+5%

playback” (A page 10) .

%#0%'.

0':6

HD content for which the delete scene operation has been

5'.'%6

':+6

applied cannot be dubbed to BDMV. Perform seamless

conversion before starting a dubbing operation.

&7$$+0)

126+10

4'6740

For details, refer to “Mode conversion” (A page 73) .

A check mark is added to the “DISCiVIDEO” item.

Note:

Select “NEXT”, and press the [OK] button

The following high bit-rate files may not meet the Blu-ray

Memo:

Disc standards when they are dubbed to a BD.

Dubbing can also be performed from the Playback

Navigation screen.

When a BDAV/BDMV disc is created (high-speed

dubbing) by importing content captured in the JVC GY-

HM700/100 SP mode.

① Select the titles to dub, and press the [OPTION]

button

② Select “DUB”, and press the [OK] button

③ Follow Steps 3 to 4 of "Preparation"

When a BDAV disc is created (high-speed dubbing) by

importing content captured in the JVC GZ-HD7/6 etc

FHD mode.

When a BDAV/BDMV disc is created by importing

Dubbing titles

Select “RECORDING FORMAT”, and press the

[OK] button

content that is captured using another video camera at a

peak bit-rate that exceeds 28.8 Mbps.

If the Blu-ray Disc standards are not met, playback on

another player may fail. To ensure that the standards are

satisfied, perform high-speed dubbing after converting the

recording mode, or perform dubbing by specifying a

recording mode.

&7$$+0)

56'2

5'.'%6ꢀ6*'ꢀ&7$$+0)ꢀ&'6#+.5

&+5%

*&&

4'%14&+0)ꢀ(14/#6

4'%14&+0)ꢀ/1&'

&8&ꢁ8+&'1

Dubbing from the HDD to a BD/DVD

*+)*ꢁ52''&ꢀ&7$$+0)

Preparation

Set a BD or DVD on the disc tray

%#0%'.

$#%-

0':6

Memo:

5'.'%6

126+10

':+6

A message appears on the monitor in the following cases

&7$$+0)

4'6740

where a disc cannot be written to. Take the necessary

actions according to the message.

Choose a format.

When an incompatible disc type is set

For more details, refer to “Format chart” (A page 25) .

When there is insufficient space on the set disc

Select “RECORDING MODE”, and press the [OK]

button

When a finalized disc is set

Press the [DUBBING] button on the remote

control unit

The Dubbing menu screen appears.

&7$$+0)

56'2

5'.'%6ꢀ6*'ꢀ&7$$+0)ꢀ&'6#+.5

&+5%

*&&

4'%14&+0)ꢀ(14/#6

4'%14&+0)ꢀ/1&'

&8&ꢁ8+&'1

*+)*ꢁ52''&ꢀ&7$$+0)

%#0%'.

$#%-

0':6

5'.'%6

126+10

':+6

&7$$+0)

4'6740

Select “HIGH-SPEED DUBBING” or a recording mode of

your preference.

Dubbing/Importing

Memo:

Dubbing a Title from the

HDD to a BD/DVD

(Continued)

Press the [MARK] button. A check mark will appear beside

the title.

All titles with a check mark can be added to the list at the

same time.

You can perform the following editing operations by

selecting a title from the dubbing title list and pressing the

[OK] button.

Memo:

High-speed dubbing

Select this option if you want to significantly shorten the

time required for dubbing.

Make use of a disc that supports high-speed recording.

Delete the selected title from the list

Change the list arrangement

Change the name of the selected title

AF/AN/AL/AE

Select “RENAME TITLE”, and press the [OK] button to

change the title of the dubbing source. Dubbing of the new

title is performed.

Can be selected for BD-R and BD-RE. Dubbing is done

with HD picture quality.

XP/SP/LP/EP

Select “NEXT”, and press the [OK] button

Dubbing is done with SD picture quality.

&7$$+0)

56'2

An appropriate mode will be chosen automatically between

XP to EP according to the remaining memory on the disc.

For more details, refer to “Dubbing the video data from the

HDD” (A page 24) and “Recording Modes” (A page 28) .

%4'#6'ꢂ6+6.'ꢂ.+56ꢂ(14ꢂ&7$$+0)

&+5%

*&&

#$%

5RQTVUꢀꢀ

%QQMKPIꢁꢁꢁ

-+&5ꢂ914.&

0GYUꢂ###

4GRQTV

Select “NEXT”, and press the [OK] button

&7$$+0)

56'2

(.19'4ꢂ.'5510ꢂꢃ

#&&ꢂ6+6.'ꢂ.+56ꢂ(14ꢂ&7$$+0)

$#%-

5'.'%6ꢀ6*'ꢀ&7$$+0)ꢀ&'6#+.5

%#0%'.

0':6

5'.'%6

':+6

&+5%

*&&

&7$$+0)

126+10

4'6740

4'%14&+0)ꢀ(14/#6

4'%14&+0)ꢀ/1&'

&8&ꢁ8+&'1

Note:

*+)*ꢁ52''&ꢀ&7$$+0)

“NEXT” cannot be selected for the following cases.

A title that cannot be dubbed has been selected

Disc memory is insufficient

%#0%'.

$#%-

0':6

5'.'%6

126+10

':+6

A dubbing title list has not been created

&7$$+0)

4'6740

Memo:

Steps 6 and 7 are not applicable for “BDAV” and “DVD-VR”

disc formats. Go to step 8.

A screen for creating a dubbing title list appears.

Create a dubbing title list

Select a background image for the disc menu

&7$$+0)

56'2

&7$$+0)

56'2

%4'#6'ꢂ6+6.'ꢂ.+56ꢂ(14ꢂ&7$$+0)

5'.'%6ꢀ6*'ꢀ&7$$+0)ꢀ&'6#+.5

&+5%

*&&

&+5%

*&&

#$%

5RQTVUꢀꢀ

%QQMKPIꢁꢁꢁ

-+&5ꢂ914.&

0GYUꢂ###

4GRQTV

%*#0)'ꢀ&+5%ꢀ/'07ꢀ$#%-)4170&

5'.'%6ꢀ(41/ꢀ&'(#7.6ꢀ$#%-)4170&

5'.'%6ꢀ(41/ꢀ56+..ꢀ2+%674'5

(+0#.+<'

(+456ꢀ2.#;

4'2'#6

010'

1((

(.19'4ꢂ.'5510ꢂꢃ

#&&ꢂ6+6.'ꢂ.+56ꢂ(14ꢂ&7$$+0)

$#%-

4'0#/'ꢀ&+5%

%#0%'.

0':6

5'.'%6

%#0%'.

$#%-

56#46

':+6

&7$$+0)

5'.'%6

126+10

4'6740

':+6

&7$$+0)

4'6740

Follow the steps below to create a dubbing title list.

Select a background image for the disc menu from

“Background” or “Still Picture”.

① Select “ADD TITLE LIST FOR DUBBING”, and press

the [OK] button

② Select the titles to dub, and press the [OK] button

“SELECT FROM DEFAULT BACKGROUND”

A default background set is used for the disc menu.

“SELECT FROM STILL PICTURES”(only for SR-

HD1500)

Use a still image on the HDD for the disc menu.

The largest size allowed for a still image that is used as

the background is 5120 x 3840.

Dubbing/Importing

② Select “REPEAT”, and choose either “OFF” or “ON”

Memo:

The background image of the disc menu can be selected

“OFF”

(only for DVD-Video and BD-MV).

The following sizes are recommended for still images.

BD : 1920 x 1080

The disc will stop and the menu will be displayed after all

the titles are played back.

“ON”

DVD : 720 x 480

Repeat playback from the first title will start automatically

after all the titles are played back.

When a still image is used, the two vertical or horizontal

edges are trimmed based on the side that is smaller than

the aspect ratio of the video to be dubbed.

③ Select “RENAME DISC”, and press the [OK] button

Change the disc name when finalizing is performed.

Select “START”, and press the [OK] button

&7$$+0)

56'2

5'.'%6ꢀ6*'ꢀ&7$$+0)ꢀ&'6#+.5

&+5%

*&&

%*#0)'ꢀ&+5%ꢀ/'07ꢀ$#%-)4170&

5'.'%6ꢀ(41/ꢀ&'(#7.6ꢀ$#%-)4170&

5'.'%6ꢀ(41/ꢀ56+..ꢀ2+%674'5

(+0#.+<'

(+456ꢀ2.#;

4'2'#6

Example of Side-cut Still Image

010'

1((

Set the operations for finalize

4'0#/'ꢀ&+5%

%#0%'.

$#%-

56#46

5'.'%6

126+10

&7$$+0)

56'2

':+6

&7$$+0)

4'6740

5'.'%6ꢀ6*'ꢀ&7$$+0)ꢀ&'6#+.5

&+5%

*&&

Dubbing starts. A progress bar is displayed during the

dubbing process.

%*#0)'ꢀ&+5%ꢀ/'07ꢀ$#%-)4170&

5'.'%6ꢀ(41/ꢀ&'(#7.6ꢀ$#%-)4170&

After dubbing is complete, a “DUBBING IS COMPLETED”

message appears on the monitor.

5'.'%6ꢀ(41/ꢀ56+..ꢀ2+%674'5

(+0#.+<'

(+456ꢀ2.#;

4'2'#6

010'

1((

Memo:

Choose “BACK” from the menu and press the [OK] button

4'0#/'ꢀ&+5%

to return to the previous screen.

%#0%'.

$#%-

56#46

5'.'%6

126+10

':+6

&7$$+0)

4'6740

Cancel dubbing

To cancel dubbing before it starts

Finalize will be performed after dubbing if “ON” has been

set for “FINALIZE”.

If a BD-MV disc is being dubbed, “OFF” cannot be set for

“FINALIZE”. And once the BD-MV disc is dubbed the disc

cannot be rewritten.

Select “CANCEL” from the menu, and press the [OK]

button to cancel dubbing.

Alternatively, you can press the [RETURN] button to cancel

dubbing and return to the initial screen.

If a DVD-Video or BD-MV disc is being dubbed, the settings

for “FIRST PLAY”, “REPEAT” and “RENAME DISC” can be

changed.

To discontinue dubbing while it is in progress

Press the [OPTION] button. Select “CANCEL” from the

Cancel Dubbing menu, and press the [OK] button.

① Select “FIRST PLAY”, and select either “NONE”,

Memo:

“TOP MENU” or “TITLE 1”

When dubbing to a BD-R or DVD-R, the disc memory will

“NONE”

be reduced as data will still be written onto the disc up to

the point where dubbing is discontinued.

A finalized disc will not be automatically played back

when it is inserted into another device.

“TOP MENU”

The disc menu will be displayed automatically when a

finalized disc is inserted into another device.

“TITLE 1”

The first title on a finalized disc will be played back

automatically when it is inserted into another device.

Memo:

“NONE” cannot be selected for “FIRST PLAY” for BD-MV.

Dubbing/Importing

Select “NEXT”, and press the [OK] button

Dubbing Still Images from

the HDD

Still images stored in the internal HDD can be dubbed to a

BD-RE or an SD card as follows.

Memo:

A message appears on the monitor when dubbing cannot

be performed in the following cases. When this occurs,

replace the disc or SD card with one that is usable.

When an incompatible disc or SD card is set

When there is insufficient space on the set disc or SD

card

Memo:

Only “JPEG” still image format is supported.

For more details, refer to “Dubbing the picture data from the

When an unformatted disc or SD card is set

HDD” (A page 24) .

For details, refer to “Formatting a disc” (A page 25) or

“Formatting an SD Card” (A page 27) .

Before dubbing

Dubbing to a disc

Select the still images to dub, and press the

[MARK] button

Set the BD-RE for dubbing on the disc tray

Dubbing to an SD card

&7$$+0)

Insert the SD card to be dubbed into the [SD SLOT]

56'2

%4'#6'ꢀ6+6.'ꢀ.+56ꢀ(14ꢀ&7$$+0)

)4172

2CIG

Dubbing still images

#..

Press the [DUBBING] button on the remote

control unit

The Dubbing menu screen appears.

On this screen, select “DISC/SDiPICTURE”

&7$$+0)

56'2

5'.'%6

24'8ꢀ2)

0':6ꢀ2)

':+6

)4172

&7$$+0)

126+10

4'6740

5'.'%6ꢁ+/2146ꢀ&7$$+0)

61ꢁ*&&

75$

61ꢁ&8&

&+5%

Pressing the [MARK] button adds a check mark to the

selected image.

All still images with a check mark are dubbed.

*&&

8+&'1

&+5%ꢀ5&

2+%674'

&+5%

*&8ꢀ&8

&+5%ꢁ%12;

&+5%

Memo:

&+5%

To clear the check mark, select the corresponding still

image, and press the [MARK] button.

%#0%'.

0':6

Pressing the [OPTION] button displays a pop-up menu.

The pop-up menu enables you to perform the following

operations.

5'.'%6

':+6

&7$$+0)

126+10

4'6740

Select the media to dub to from the media

selection screen

A checkmark will be added to the selected media.

BACK

: Exits the pop-menu and returns to the

initial screen.

SELECT ALL

: Selects all still images within the same

group.

&7$$+0)

56'2

DESELECT ALL : Clears the selection of all still images

within the same group.

+05'46ꢁ#0&ꢁ5'.'%6ꢁ#ꢁ/'&+#

Note:

A message appears if the selected still images do not fit

into the disc. Check mark cannot be added to a still image if

there is insufficient space on the disc.

*&&

$&ꢀ4'

*&&

5&ꢁ%#4&

%#0%'.

$#%-

0':6

5'.'%6

126+10

':+6

&7$$+0)

4'6740

Dubbing/Importing

Select “START”, and press the [OK] button

Dubbing from the Playback Navigation

screen

&7$$+0)

56'2

Dubbing can also be performed from the Playback Navigation

screen.

5'.'%6ꢀꢁ56#46ꢁꢀ61ꢀ$')+0ꢀ&7$$+0)

&7$$+0)ꢀ56+..ꢀ2+%674'5

Select the still images to dub, and press the

[OPTION] button

0#8+)#6+10 ^{6+6.' ꢁ6*7/$0#+.ꢂ}

07/$'4ꢀ1(ꢀ56+..ꢀ2+%674'5ꢀ61ꢀ$'ꢀ&7$$'&ꢂꢀꢃꢃꢃ

126+105

8+&'1

2+%674'

$#%-

2.#;

)4172

#..

&'.'6'

&7$

%#0%'.

$#%-

56#46

5'.'%6

126+10

':+6

/1&'ꢀ%*#0)'

'&+6

&7$$+0)

4'6740

'&+6ꢀ+0(1

16*'45

Dubbing starts. A progress bar is displayed during the

dubbing process.

After dubbing is complete, a “DUBBING IS COMPLETED”

message appears on the monitor.

5'.'%6

126+10

24'8ꢀ2)

0':6ꢀ2)

':+6

0#8+)#6+10

8+&'1 2+%674'

)4172

4'6740

Memo:

A directory of the following configuration is created in the

Select “DUB”, and press the [OK] button

media, and still images are written with file names ranging

from “PIC_0001.jpg” to “PIC_9999.jpg”.

Follow steps 3 to 5 of “Dubbing still images”

Memo:

root

DCIM

100JVCS

PIC_0001.JPG

PIC_0002.JPG

PIC_0003.JPG

Check marks of still images that appear on the Playback

navigation screen will remain added to the image on the

still image selection screen.

Cancel dubbing

101JVCS

PIC_0001.JPG

PIC_0002.JPG

PIC_0003.JPG

To cancel dubbing before it starts

Select “CANCEL” from the menu, and press the [OK]

button to cancel dubbing.

Alternatively, you can press the [RETURN] button to cancel

dubbing and return to the initial screen.

To discontinue dubbing while it is in progress

Press the [OPTION] button. Select “CANCEL” from the

Cancel Dubbing menu, and press the [OK] button.

Dubbing/Importing

Memo:

Enabling Playback on

To cancel the finalizing operation, select “NO” and press

the [OK] button.

Other Devices (Finalizing)

Setting the top menu items

DVD-R and DVD-RW discs may need to be finalized before

they can be played on other DVD players.

(+0#.+<'

Memo:

Discs in the Video mode becomes a DVD-Video format with

6*'ꢁ&+5%ꢁ9+..ꢁ$'ꢁ(+0#.+<'&ꢁ61ꢁ'0#$.'ꢁ2.#;$#%-ꢁ10ꢁ16*'4ꢁ&8&ꢁ&'8+%'5

&8&ꢀ49ꢁ8KFGQ

a title menu after finalizing.

%*#0)'ꢁ&+5%ꢁ/'07ꢁ$#%-)4170&

5'.'%6ꢁ(41/ꢁ&'(#7.6ꢁ$#%-)4170&

Discs containing DVD-Video data can be finalized by

setting the disc operation settings according when the disc

is inserted into this unit.

5'.'%6ꢁ(41/ꢁ56+..ꢁ2+%674'5

(+456ꢁ2.#;

4'2'#6

612ꢁ/'07

1((

Recording or editing of the disc will not be possible after it

is finalized.

If a DVD that was recorded using VR mode has been

(+0#.+<'

&1ꢁ016ꢁ(+0#.+<'

finalized, the disc can only be played back on VR mode

compatible devices.

5'.'%6

':+6

/'&+#ꢁ/#0#)'

126+10

4'6740

Before finalizing, set “FIRST PLAY”, “REPEAT”, and

“CHANGE DISC MENU BACKGROUND” accordingly.

Set according to the steps below.

Finalizing

Set the BD or DVD to be finalized on the disc tray

① Select “FIRST PLAY”, and select an appropriate first

Press the [MEDIA MANAGE] button on the

remote control unit

The Media Management menu screen appears.

play setting item

This item is used for setting the disc operation when a

finalized disc is inserted into another device.

NONE

: A finalized disc will not be automatically

played back when it is inserted into another

device.

/'&+#ꢀ/#0#)'/'06

$&ꢁ&8&

TOP MENU : The disc menu will be displayed

automatically when a finalized disc is

inserted into another device.

(14/#6

(+0#.+<'

4'0#/'ꢀ&+5%

5&ꢀ%#4&

TITLE 1

: The first title on a finalized disc will be

played back automatically when it is

inserted into another device.

(14/#6

$&ꢂ8+&'1ꢀ&#6#ꢀ'4#5'

*&&

(14/#6

② Select “REPEAT”, and select an appropriate repeat

setting item

Set the disc action to be taken after all titles have been

played back.

Select “FINALIZE” from “BD/DVD”

OFF : The disc will stop and the menu will be displayed

after all the titles are played back.

Select “YES” and press the [OK] button

The top menu setting screen appears.

: Repeat playback from the first title will start

automatically after all the titles are played back.

%10(+4/

&+5%ꢀ9+..ꢀ$'ꢀ(+0#.+<'&ꢀ(14ꢀ2.#;$#%-ꢀ10ꢀ16*'4ꢀ&8&ꢀ&'8+%'5

+6ꢀ9+..ꢀ6#-'ꢀ#$176ꢀ::ꢀ/+076'5

;17ꢀ%#0016ꢀ5612ꢀ6*'ꢀ(+0#.+<#6+10ꢀ10%'ꢀ+6ꢀ56#465

&1ꢀ;17ꢀ9#06ꢀ61ꢀ(+0#.+<'!

;'5

Dubbing/Importing

③ Select “CHANGE DISC MENU BACKGROUND” to

select a background image for the top menu

Unfinalizing a disc

Only DVD-RW discs that are finalized on this unit can be

unfinalized.

After a disc is unfinalized, addition of new titles and editing

are possible.

You can register and use a background image of your

preference.

(+0#.+<'

Note:

5'.'%6ꢀ#ꢀ6+6.'ꢀ#5ꢀ$#%-)4170&ꢀ&'5+)0ꢀ(14ꢀ6*'ꢀ/'07ꢀ5%4''0

2CIG

All discs except DVD-RW (VR mode) cannot be unfinalized.

)4172

#..

To unfinalize a disc

Set a DVD-RW disc that is finalized by this unit

on the disc tray

Press the [MEDIA MANAGE] button on the

remote control unit

The media management menu screen appears.

5'.'%6

126+10

':+6

/'&+#ꢀ/#0#)'/'06

4'6740

/'&+#ꢀ/#0#)'/'06

Memo:

$&ꢁ&8&

The items in “FIRST PLAY”, “REPEAT” and “CHANGE

DISC MENU BACKGROUND” can also be set in “Dubbing

a Title from the HDD to a BD/DVD” (A page 39) .

(14/#6

(+0#.+<'

4'0#/'ꢀ&+5%

5&ꢀ%#4&

Select “FINALIZE”, and press the [OK] button

(14/#6

$&ꢂ8+&'1ꢀ&#6#ꢀ'4#5'

*&&

(+0#.+<'

(14/#6

6*'ꢁ&+5%ꢁ9+..ꢁ$'ꢁ(+0#.+<'&ꢁ61ꢁ'0#$.'ꢁ2.#;$#%-ꢁ10ꢁ16*'4ꢁ&8&ꢁ&'8+%'5

&8&ꢀ49ꢁ8KFGQ

%*#0)'ꢁ&+5%ꢁ/'07ꢁ$#%-)4170&

5'.'%6ꢁ(41/ꢁ&'(#7.6ꢁ$#%-)4170&

Select “FINALIZE” from “BD/DVD”

5'.'%6ꢁ(41/ꢁ56+..ꢁ2+%674'5

Select “YES” and press the [OK] button

(+456ꢁ2.#;

4'2'#6

612ꢁ/'07

1((

FINALIZE

&1ꢁ016ꢁ(+0#.+<'

5'.'%6

126+10

4'6740

':+6

/'&+#ꢁ/#0#)'

%10(+4/

6*'ꢀ&+5%ꢀ9+..ꢀ$'ꢀ70(+0#.+<'

+6ꢀ6#-'5ꢀ#$176ꢀ:::ꢀ/+076'5

;17ꢀ%#0016ꢀ5612ꢀ6*'ꢀ241%'55ꢀ10%'ꢀ+6ꢀ56#46'&

&1ꢀ;17ꢀ9#06ꢀ61ꢀ70(+0#.+<'!

Finalizing starts.

After finalization is complete, a “THE DISC HAS BEEN

FINALIZED” message appears on the monitor.

;'5

%10(+4/

Unfinalizing starts.

6*'ꢀ&+5%ꢀ*#5ꢀ$''0ꢀ(+0#.+<'&

After unfinalizing is complete, a “THE DISC HAS BEEN

UNFINALIZED” message appears on the monitor.

Dubbing/Importing

Select “NEXT”, and press the [OK] button

The disc tray will open automatically.

Copying the Entire Disc

Set the source BD or DVD on the disc tray

Select “START”, and press the [OK] button

Copying the entire disc allows all content on a BD (BDMV) or

DVD (AVCHD, DVD-Video) to be copied onto another disc.

Note:

Content cannot be copied to a formatted BD-R or DVD-R

disc. Make use of an unformatted disc.

&7$$+0)

56'2

5'.'%6ꢀꢁ56#46ꢁꢀ61ꢀ$')+0ꢀ&7$$+0)

&+5%ꢀ%12;

Use a DVD-R/-RW instead of a BD-R/-RE or DVD when the

source disc is a BD disc.

The disc to be copied onto will be formatted when copy is

performed. Check that the disc has not been used before

or if it is ok to delete data on the disc when using a BD-RE

or a DVD-RW.

+05'46ꢀ6*'ꢀ&+5%ꢀ61ꢀ$'ꢀ%12+'&

In the case of BD, volume labels are not copied.

%#0%'.

$#%-

56#46

If an unsupported disc is set, “UNABLE TO IMPORT FROM

5'.'%6

126+10

':+6

DISC” or “UNABLE TO DUB ONTO DISC INSERT

ANOTHER DISC” will be displayed on the monitor. Use a

disc that is supported by this unit.

&7$$+0)

4'6740

The disc tray will close automatically. The source BD or

DVD will be recognized, and copying to the internal HDD

will proceed.

For details on discs that are supported by this unit, refer to

“Discs that enable both dubbing and playback” (A page 10)

and “Discs that enable playback only” (A page 10) .

The disc tray will open automatically after copying has

finished and “READY TO COPY NOW. INSERT THE DISC

FOR COPYING” will be displayed on the monitor.

Press the [DUBBING] button on the remote

control unit

The Dubbing screen appears.

Memo:

Confirm the insufficient space on the internal HDD when

&7$$+0)

56'2

the copy interrupts.

5'.'%6ꢁ+/2146ꢀ&7$$+0)

Set a BD or DVD to copy on the disc tray

Select “START”, and press the [OK] button

61ꢁ*&&

75$

61ꢁ&8&

&+5%

8+&'1

*&&

&+5%ꢀ5&

2+%674'

&7$$+0)

56'2

&+5%

*&8ꢀ&8

&+5%ꢁ%12;

&+5%

5'.'%6ꢀꢁ56#46ꢁꢀ61ꢀ$')+0ꢀ&7$$+0)

&+5%ꢀ%12;

&+5%

%#0%'.

0':6

5'.'%6

':+6

&7$$+0)

126+10

4'6740

4'#&;ꢀ61ꢀ%12;ꢀ019ꢂꢀ+05'46ꢀ6*'ꢀ&+5%ꢀ(14ꢀ%12;+0)

Select “DISChDISC”, and press the [OK] button

A menu screen for copying the entire disc appears.

%#0%'.

$#%-

56#46

5'.'%6

126+10

':+6

Memo:

&7$$+0)

4'6740

During copy of the entire disc, data is temporarily copied to

the internal HDD.

The disc tray will close automatically. BD or DVD will be

recognized, and the contents that were copied to the HDD

will be copied to the disc.

Only discs that are not copyright-protected can be copied.

Set the number of discs to copy using the [ J / K ]

buttons

You can specify up to a maximum of 10 discs.

Memo:

The copy operation will not be performed when the

remaining disc memory is not sufficient.

&7$$+0)

52'%+(;ꢀ6*'ꢀ07/$'4ꢀ1(ꢀ%12+'5ꢀ#0&ꢀ5'.'%6ꢀ̌':'%76'̍

07/$'4ꢀ1(ꢀ%12+'5

%#0%'.

$#%-

0':6

5'.'%6

':+6

24'8ꢀ2)

0':6ꢀ2)

&7$$+0)

126+10

4'6740

Dubbing/Importing

Complete the entire disc copying

After copy is complete the tray will open automatically, and

copy of the entire disc ends.

Recording Using External

Inputs

Videos on an external device that is connected to i.LINK (HDV/

DV) or video / S-video input can be recorded to the HDD.

BD, DVD can be recorded from the [VIDEO]/[S-VIDEO] input.

Memo:

Only titles that are not copyright-protected can be imported.

%10(+4/

%12;+0)ꢀ1061ꢀ6*'ꢀ:::ꢀ&+5%ꢀ+5ꢀ%1/2.'6'&

Press the [HDD] or [BD/SD] button to select the

location to record the file

Press the [INPUT SELECT] button on the remote

control, and choose external input (HDV/DV or L-1)

Press the [REC MODE] button and select a

recording mode

Press the [ R ] and [ I ] remote control buttons

Memo:

together to start the recording process

The screen prompting you to insert a new disc appears

Recording can also be start by pressing the [ R ] button on

this unit.

repeatedly until this unit has finished copying the number of

discs specified in Step 3. When the message appears, set

a new BD or DVD on the disc tray, select “START”, and

press the [OK] button.

Operate the external device using i.LINK(HDV/

DV) or the video/S-video input to output the

videos to be recorded

&7$$+0)

56'2

Press the [ o ] button on either this unit or the

remote control to display the pop-up screen,

choose “STOP” and press the [OK] button

5'.'%6ꢀꢁ56#46ꢁꢀ61ꢀ$')+0ꢀ&7$$+0)

&+5%ꢀ%12;

End the recording.

%12;+0)ꢀ1061ꢀ6*'ꢀꢂ56ꢀ&+5%ꢀ+5ꢀ%1/2.'6'&

+05'46ꢀ#ꢀ0'9ꢀ&+5%

Memo:

When recording images via a video camera using i.LINK

connection, recording may stopped if the video camera is

loaded with a DV tape while in the shooting mode. In this

case, remove the DV tape before recording.

%#0%'.

$#%-

56#46

Recording will be stopped if the maximum recording time has

been reached, or if there is insufficient memory in the media.

5'.'%6

126+10

':+6

&7$$+0)

4'6740

For HDV contents, “DR” will be used to record instead of the

selected recording mode.

After copy is complete, the data copied onto the HDD will

be deleted.

RECORDABLE MEDIA

RECORDING

MODE

RECORDABLE MEDIA

Select “CANCEL” from the menu, and press the [OK]

button to cancel disc copying.

HDD

DVD-RW

(VR format) (BD-AV format)

BD-RE

HDV

&7$$+0)

56'2

AF (HD)

AN (HD)

AL (HD)

AE (HD)

XP (SD)

SP (SD)

LP (SD)

EP (SD)

5'.'%6ꢀꢁ56#46ꢁꢀ61ꢀ$')+0ꢀ&7$$+0)

&+5%ꢀ%12;

%10(+4/

&1ꢀ;17ꢀ9#06ꢀ61ꢀ%#0%'.ꢀ&7$$+0)!

;'5

DV/L1

%#0%'.

$#%-

56#46

5'.'%6

126+10

':+6

&7$$+0)

4'6740

MAXIMUM CONTINUOUS RECORDING TIME

HDD : 24 hours (*1)

DVD-RW : 8 hours

BD-RE : 8 hours

*1: Title will automatically be split into time separated by 8

hours. The dividing point will not be recorded.

For the recording modes and maximum recording time for

each disc, refer to “Recording Modes” (A page 28) .

Playing Back

About Playing Back

Using Playback Navigation

Videos or edited videos stored on the internal HDD, as well as

videos stored on a disc or SD card can be played back on this unit.

The types of media that are playable on this unit are as follows.

Videos can be easily played back for viewing using the

“Playback Navigation” function available on this unit.

Videos and still images stored on the internal HDD

Displaying the Playback Navigation screen

Videos stored on different disc types

Select the location of the playback file

Press the [HDD] button on the remote control unit

Play back videos or still images stored on the HDD.

Press the [BD/SD] button on the remote control unit.

Videos and still images stored on backup discs created

using the “Everio Writer”

Videos and still images stored on SD cards

These videos can be easily played back for viewing using the

“Playback Navigation” software that comes with this unit.

For details on the “Playback Navigation” software, refer to

“Using Playback Navigation” (A page 48) .

Play back videos or still images stored on a BD/DVD or a

SD.

Press the [NAVIGATION] button on the remote

control unit

The Playback Navigation screen appears.

Memo:

This unit does not support DivX videos.

If AVCHD files are displayed in thumbnails, black bars may appear

on the left and right borders depending on the video resolution.

Memo:

Pressing the [BD/SD] button each time switches the media

to play back between BD/DVD and SD.

To display MOV* files stored on an SD card using Playback

Navigation, make use of list display. Thumbnail display is

not supported. Files on the SD card cannot be played back

directly. To do so, import them into a HDD.

You can also switch the media to play back by pressing the

[HDD] or [BD/SD] button when the Playback Navigation

screen is displayed.

For details on importing MOV* files from an SD card, refer to

“Importing Data from an SD Card to the HDD” (A page 35) .

MOV* : MOV files that are taken in SP mode using the JVC

ProHD Camcorder GY-HM700/100

Operating Playback Navigation

Playing a video/still image

Plays the selected video/still image.

Display Marks on the Playback Navigation Screen

6+6.' ꢃ6*7/$0#+.ꢄ

0#8+)#6+10

4'/#+0 ꢀꢁꢂ

8+&'1

2+%674'

Icon

Mark name

Explanation

2CIG

Protect Mark Indicates protected titles.

)4172

001

002

003

004

Mode

Conversion

Preset Mark

Indicates titles for which mode

conversion has been preset.

VKVNG

005

006

007

008

Not Viewed

Mark

Indicates titles that have not

been viewed or groups

containing titles that have not

been viewed.

5'.'%6

126+10

4'6740

24'8ꢅ2)

0':6ꢅ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

Select a title to play back, followed by pressing the [OK] or

[I] button to play the selected video/still image.

Scene

Indicates titles for which scene

Delete Mark delete or chapter delete has

been applied.

Memo:

Select a group and press the [OK] button to display all titles

in the group.

Group Mark

Indicates a group.

Playlist Mark Indicates a playlist.

Not Playable Indicates titles that cannot be

Mark

played.

Question

Mark

Indicates titles of which the

thumbnails cannot be

displayed. Playback may not be

possible.

Playing Back

Switching between thumbnail and list

displays

Switching between video and still image

displays

You can switch between the thumbnail display and list display

of a video.

You can switch the display between the video thumbnail list

screen and still image thumbnail screen.

When the video thumbnail list screen is displayed

6+6.' ꢃ6*7/$0#+.ꢄ

0#8+)#6+10

4'/#+0 ꢀꢁꢂ

8+&'1

2+%674'

8+&'1

2+%674'

2CIG

)4172

001

002

003

004

001

002

003

004

VKVNG

005

006

007

008

005

006

007

008

5'.'%6

126+10

5'.'%6

126+10

4'6740

24'8ꢅ2)

0':6ꢅ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

24'8ꢅ2)

0':6ꢅ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

Press the [RED] button to display the title list screen.

When the title list screen is displayed

Press the [GREEN] button to display the still image

thumbnail list screen.

When the still image thumbnail list screen is displayed

0#8+)#6+10 6+6.' ꢄ.+56ꢅ

8+&'1

2+%674'

6+6.'ꢂ6*7/$0#+.ꢃ

0#8+)#6+10

2CIG

4'/#+0 ꢀꢁꢀ

8+&'1

2+%674'

)4172

#..

2CIG

(1.&'4

#$%

5RQTVUꢀꢀ

%QQMKPIꢁꢁꢁ

-+&5ꢂ914.&

0GYUꢂ###

4GRQTV

(.19'4ꢂ.'5510ꢂꢃ

#PKOCN

5'.'%6

4'6740

)4172

24'8ꢂ2)

0':6ꢂ2)

':+6

6*7/$0#+. 2+%674'

0#8+)#6+10

126+10

5'.'%6

126+10

24'8ꢄ2)

0':6ꢄ2)

':+6

0#8+)#6+10

%106'06

(1.&'4

4'6740

Press the [RED] button to display the video thumbnail list

screen.

Press the [RED] button to display the video thumbnail list

screen.

Displaying a group/folder

A group/folder screen can be displayed.

Displaying the Option menu

Displaying the Option menu enables you to perform different

operations on a selected title/group, including “BACK”,

“PLAY”, “DELETE”, “DUB”, “GROUP”, “UNGROUP”, “DO

NOT GROUP”, “MODE CHANGE”, “EDIT”, “EDIT INFO” and

“OTHERS”.

6+6.'ꢂ.+56ꢃ

0#8+)#6+10

8+&'1

)4172

4'/#+0 ꢀꢁꢀ

#..

2CIG

9GFFKPI

&TKXKPI

$KTVJFC[ꢄ%QOOKVVGG

₀₀₂6TCXGN

001

003

004

2KEPKE

Select a title/group, and press the [OPTION]

button

An Option menu appears.

5RQTVUꢄFC[

2KCPQꢄEQPEGTV

005

006

007

008

6+6.' ꢀ6*7/$0#+.ꢁ

0#8+)#6+10

126+105

8+&'1

2+%674'

5'.'%6

126+10

$#%-

4'6740

24'8ꢄ2)

0':6ꢄ2)

':+6

.+56

2+%674'

0#8+)#6+10

2.#;

)4172

#..

&'.'6'

&7$

001

002

003

004

&1ꢂ016ꢂ)4172

/1&'ꢂ%*#0)'

'&+6

Press the [YELLOW] button to display the group/folder

screen.

VKVNG

'&+6ꢂ+0(1

16*'45

005

006

007

008

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

4'6740

Playing Back

EDIT INFO

Using Playback Navigation

(Continued)

Switches to the menu screen of the sub-items.

MODIFY TITLE NAME/MODIFY GROUP NAME

Switches to the rename screen for the selected title/

group name.

For details, refer to “Changing the Title/Group Name” (A

page 62) .

Select an operation option, and press the [OK]

button

Options that cannot be operated are displayed in gray and

cannot be selected.

MODIFY THUMBNAIL

For details on the Option menu items, refer to “Option menu

list” (A page 50) .

Switches to the thumbnail modification screen of the

selected title.

For details, refer to “Editing a Thumbnail” (A page 66) .

MODIFY DATE

Option menu list

BACK

Switches to the recording date modification screen of the

selected title.

For details, refer to “Changing the Shooting Date/Time”

(A page 72) .

Returns to the previous screen.

PLAY

PROTECT

Plays back the selected title/group.

For details on the button operations during playback, refer

to “Video Playback Operation” (A page 51) .

Switches to the protection screen of the selected title/

group.

For details, refer to “Turning On Title/Group Protection”

(A page 63) .

DELETE

Deletes a selected title/group.

For details, refer to “Deleting a Title/Group” (A page 62) .

UNPROTECT

Switches to the screen for turning off protection of the

selected title/group.

For details, refer to “Turning Off Title/Group Protection”

(A page 64) .

DUB

Performs dubbing of a selected title/group.

For details, refer to “Dubbing/Importing” (A page 23) .

GROUP

Groups the selected titles/groups.

For details, refer to “Grouping” (A page 60) .

OTHERS

Switches to the menu screen of the other-items.

CHAPTER LIST

UNGROUP

Ungroups a selected group.

For details, refer to “Ungrouping” (A page 60) .

DETAILS

THUMBNAIL

LIST

DO NOT GROUP

VIDEO

Removes the selected titles from a group.

For details, refer to “Excluding from a group” (A page

61) .

PICTURE

GROUP

MODE CHANGE

FOLDER SELECT

Changes the mode of the selected title/group.

For details, refer to “Mode conversion” (A page 73) .

CONTENT

CHAPTER LIST

Displays the chapters of a selected title.

EDIT

Switches to the menu screen of the sub-items.

CHAPTER EDIT

Switches to the chapter edit screen of the selected title.

For details, refer to “Editing a Chapter” (A page 67) .

PLAYLIST EDIT

Switches to the playlist edit screen of the selected title.

For details, refer to “Creating a Playlist” (A page 65) .

DELETE SCENE

Switches to the delete scene screen of the selected title.

For details, refer to “Delete Scenes” (A page 70) .

DIVIDE

Switches to the dividing screen of the selected title.

For details, refer to “Dividing” (A page 69) .

Playing Back

Frequently used button operations

Video Playback Operation

[ I ] button

If the stop position (resume point) is memorized in the

selected video, pressing the button plays back the video

from this position.

The video may not resume playback depending on the

media and settings used. Refer to “RESUME” (A page

77) .

If playback is paused (Still mode), pressing the button

resumes playback.

[ o ] button

Pressing the button stops playback after memorizing the

stop position (resume point).

Pressing the button again after playback stops clears the

memory of the stop position (resume point).

[ W ] button

Pressing the button stops playback temporarily.

[ N ] button

Pressing the button once during playback switches to a

playback speed of 1.3 times (with audio sound).

Pressing the button in the 1.3x playback or fast forward

mode fast forwards the video.

Pressing the button each time switches the search speed.

(5xh10xh30xh60x)

Memo:

The listed speed for searching and slow motion is an

approximate amount.

Pressing the button in the Still mode forwards the video

frame by frame.

Pressing and holding down the button in the Still mode

starts playback in slow motion.

Pressing the button during playback in slow motion

switches the playback speed. The speed changes each

time the button is pressed.

(1/24xh1/16xh1/8xh1/2x)

[ O ] button

During normal playback, 1.3x playback, fast forward, or fast

reverse, pressing the button fast reverses playback.

Pressing the button each time switches the search speed.

(1xh5xh10xh30x)

Pressing the button in the Still mode reverses the video

frame by frame.

Pressing and holding down the button in the Still mode

starts reverse playback of the video in slow motion.

Pressing the button during playback in slow motion

switches the playback speed. The speed changes each

time the button is pressed.

(1/24xh1/16xh1/8xh1/2x)

Memo:

The listed speed for searching and slow motion is an

approximate amount.

[ T ] / [ S ] button

Pressing any of the buttons moves the chapter position.

[MARK] button

Pressing the button enables you to add a chapter mark to a

title.

Playing Back

Useful button operations

Video Playback Operation

(Continued)

[ v ] button

During normal playback, 1.3x playback, slow motion

[PB MODE] button

Displays the Playback Settings screen, which enables you

to modify the settings.

For details, refer to “Changing Playback Settings”.

playback, fast forward, or fast reverse, pressing the button

moves the playback position forward by about 30 seconds.

Pressing the button multiple times moves playback to the

position equivalent to the number of times pressed

multiplied by 30 seconds.

[AUDIO] button

Switches the audio channel.

[SUB TITLE] button

Switches the subtitle display.

Normal playback will resume after the position has been

[ANGLE] button

Switches the angle.

moved. If pressed during 1.3x playback, 1.3x playback will

continue after the position has been moved.

Contents may be played back in the normal mode

depending on the type of disc or content.

Memo:

Pressing the [AUDIO], [SUB TITLE], or [ANGLE] button has

no effect if their selection is not available in the playback

video.

Pressing the button in the Still mode moves the current

paused position forward by about 30 seconds while

maintaining the Still mode.

[ w ] button

During normal playback, 1.3x playback, slow motion

playback, fast forward, or fast reverse, pressing the button

moves the playback position back by about seven seconds.

Pressing the button multiple times moves playback to the

position equivalent to the number of times pressed

multiplied by seven seconds.

Normal playback will resume after the position has been

moved. If pressed during 1.3x playback, 1.3x playback will

continue after the position has been moved.

Contents may be played back in the normal mode

depending on the type of disc or content.

Pressing the button in the Still mode moves the current

paused position back by about seven seconds while

maintaining the Still mode.

[HDD] button

During playback of videos on a “BD/DVD” or “SD”, pressing

the button stops the current playback and switches to the

“HDD” mode.

Pressing the button during display of the Playback

Navigation screen switches to the Playback Navigation

screen for the “HDD” mode.

[BD/SD] button

During playback of videos on a “BD/DVD” or “SD”, pressing

the button stops the current playback and switches from

“BD/DVD” to “SD” or vice versa.

Pressing the button during display of the Playback

Navigation screen switches to the Playback Navigation

screen for the other media. During playback of videos on

the “HDD”, pressing the button stops the current playback

and switches to “BD/DVD” mode.

Memo:

The display switches automatically to the SD mode only if

the inserted SD card contains playable videos or still

images.

Playing Back

Playing an EverioBackup Disc*

EverioBackup* : Data disc containing high-definition videos

that are recorded in the MPEG2 format

Playing Videos on a BD/

DVD

using a DVD writer for Everio.

Playback starts automatically after a BD/DVD is set.

If the Auto Play feature is disabled, play the title using

Playback Navigation.

Set the disc on the disc tray

Press the [NAVIGATION] button

The Playback Navigation screen appears.

Memo:

For details on the button operations during playback, refer

Select a title, and press the [OK] button

Playback of the selected title starts.

to “Video Playback Operation” (A page 51) .

Memo:

Playing a disc when Auto Play is enabled

If the current playback location is HDD or SD, press the

[BD/SD] button on the remote control unit to switch it to BD/

DVD.

Set a BD or DVD on the disc tray

Auto Play starts.

Videos can also be played back without starting up

Playback Navigation.

Playing a disc when Auto Play is disabled

Pressing the [I] button plays back titles starting from that

with the oldest recording date.

Set a BD or DVD on the disc tray

Press the [NAVIGATION] button

The Playback Navigation screen appears.

Playing Video Discs Created Using a PC

Videos that are created using a PC can be played back using

Playback Navigation.

6+6.' ꢀ6*7/$0#+.ꢁ

0#8+)#6+10

8+&'1

2+%674'

Set the disc on the disc tray

001

Press the [NAVIGATION] button

The Playback Navigation screen appears.

Select a title, and press the [OK] button

Playback of the selected title starts.

Memo:

The formats that can be played back are BDAV, BDMV,

DVD-Video and DVD-VR (CPRM-compatible).

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

0#8+)#6+10

'06'4

$#%-

8+&'1 2+%674'

)4172

If the current playback location is HDD or SD CARD, press

the [BD/SD] button on the remote control unit to switch it to

BD/DVD.

Select a title, and press the [OK] button

Playback of the selected title starts.

Videos can also be played back without starting up

Playback Navigation.

Pressing the [I] button starts playback from the stop

position (resume point) of the disc.

If the stop position (resume point) is not memorized or if the

setting for resume has been set to “OFF”, playback starts

from the beginning of the disc.

Memo:

If the current playback location is HDD or SD, press the

[BD/SD] button on the remote control unit to switch it to BD/

DVD.

Videos can also be played back without starting up

Playback Navigation.

Pressing the [I] button starts playback from the stop

position (resume point) of the disc.

Playback may not be possible due to compatibility

problems.

If the stop position (resume point) is not memorized or if the

setting for resume has been set to “OFF”, playback starts

from the beginning of the disc.

Playing Back

Playing Videos on the HDD

Playing Videos on a SD

Card

Titles stored on the HDD can be played back using Playback

Navigation.

Titles stored on an SD card can be played back using

Playback Navigation.

You can select a video to play from “Title”, “Group”, or

“Playlist”.

You can select a video to play from “Title”.

Memo:

Insert the SD card into the [SD SLOT]

For details on the button operations during playback, refer

to “Video Playback Operation” (A page 51) .

Switch the playback location to “SD CARD” after the SD

card is detected by the unit.

Press the [NAVIGATION] button

The Playback Navigation screen appears.

Playing titles stored on the HDD

Press the [NAVIGATION] button

The Playback Navigation screen appears.

6+6.' ꢀ6*7/$0#+.ꢁ

0#8+)#6+10

8+&'1

2+%674'

Select the titles to playback, and press the [I]

button

001

Playback of the selected title starts.

Memo:

If the current playback location is “BD/DVD” or “SD CARD”,

press the [HDD] button on the remote control unit to switch

it to “HDD”.

To play back specific titles within a group, select the group,

press the [OK] button, and select the titles accordingly.

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

0#8+)#6+10

'06'4

$#%-

8+&'1 2+%674'

)4172

Videos can also be played back without starting up

Playback Navigation.

Pressing the [I] button starts playback of the most recently

played title.

If there are no recently played titles, playback starts from

the title with the most recent recording date.

Select a title, and press the [OK] button

Playback of the selected title starts.

Memo:

Playback navigation displays AVCHD files stored on the SD

card in titles, not in scenes (chapters). Titles are grouped

such as according to the date, recording mode, or number

of scenes. Make use of thumbnail display to display titles.

List display is not supported.

The formats that can be played back are AVCHD and SD-

VIDEO. If AVCHD files are displayed in thumbnails, black

bars may appear on the left and right borders depending on

the video resolution.

When there are files of different formats (AVCHD, SD-

VIDEO, MOV*) in the SD card, press the [RED] button to

select the format you want to display.

MOV*: MOV files that are taken in SP mode using the JVC

ProHD Camcorder GY-HM700/100

Videos can also be played back without starting up

Playback Navigation.

Pressing the [I] button starts playback from the stop

position (resume point).

If the stop position (resume point) is not memorized,

playback starts from the beginning of the playable content.

If the setting for “QUICK STARTUP” is set to “OFF”, the

resume point will not be memorized when the power is

turned OFF.

For details on the button operations during playback, refer to

“Video Playback Operation” (A page 51) .

Playing Back

Enabled button operations during still

Playing Still Images (JPEG)

Still images stored on the HDD/BD/DVD/SD card can be

played back using Playback Navigation.

image playback

[ I ] button

Pressing the button when a title/group is selected starts

playback of the still images in the title/group in a slideshow.

Playing still images

[ o ] button

Pressing the button stops the slideshow and displays the

Playback Navigation screen.

Select the playback location

HDD

: If the current playback location is “BD/DVD” or

“SD CARD”, press the [HDD] button on the remote

control unit to switch it to “HDD”.

[ W ] button

Pressing the button stops the slideshow temporarily.

BD/DVD : If the current playback location is “HDD” or “SD

CARD”, press the [BD/SD] button on the remote

control unit to switch it to “BD/DVD”.

[ S ] / [ T ] button

Pressing the button displays the previous or next still

image.

SD card : If the current playback location is “HDD” or “BD/

DVD”, press the [BD/SD] button on the remote

control unit to switch it to “SD CARD”.

[ A ] button

Pressing the button ends playback of the still images and

turns the power of the unit to "Off".

Set the media

To play a media other than “HDD”, set the media on which

the still images are stored.

Memo:

The display of still images can be zoomed in/out or rotated

BD/DVD : Set a BD or DVD on the disc tray

using the following buttons when the slideshow is paused.

SD card : Insert the SD card into the [SD SLOT]

[ v ] / [BLUE] button

Select the still images to play, and press the [ I ]

button

Rotates the still image by 90° in the anti-clockwise

direction.

Images selected are played back in a slideshow.

[ w ] / [YELLOW] button

Rotates the still image by 90° in the clockwise direction.

6+6.'ꢂ6*7/$0#+.ꢃ

0#8+)#6+10

4'/#+0 ꢀꢁꢀ

8+&'1

2+%674'

[OK] / [RED] button

2CIG

Enlarges the still image.

(1.&'4

[RETURN] / [GREEN] button

Reduces the still image.

[ J / K / H / I ] button

Moves the display position toward the direction indicated

by the button.

This unit does not have a still image edit feature. Still

images cannot be saved when they are zoomed in or

rotated.

5'.'%6

126+10

24'8ꢄ2)

0':6ꢄ2)

':+6

0#8+)#6+10

%106'06

(1.&'4

4'6740

Priority of display is given to the media (“BD/DVD” or “SD

CARD”) that contains playable still images.

If both “BD/DVD” and “SD CARD” contain playable videos,

priority of display will be given to the most recently used

media.

Memo:

The slide show plays back images according to the date of

the files.

If folders exist, files inside the selected folder will be played.

You can specify the “REPEAT”, “SLIDESHOW INTERVAL”

and “SLIDESHOW EFFECTS” settings in the Playback

Settings menu.

For details, refer to the “REPEAT” (A page 56) ,

“SLIDESHOW INTERVAL” (A page 56) , and

“SLIDESHOW EFFECTS” (A page 56) items under

“Playback Settings”.

Playing Back

Playback settings

Changing Playback

Settings

2.#;$#%-ꢀ5'66+0)

4'2'#6

1((

%*#0)'ꢀ6+6.'

%*#0)'ꢀ%*#26'4

6+/'ꢀ,7/2

Displaying the playback settings menu

Press the [PB MODE] button on the remote

control unit during the playback of a title

The Settings Menu screen appears.

The playback settings menu can only be displayed during

the playback of a title.

Only settings that are supported by the current title being

played back can be changed in the playback settings

menu.

REPEAT

The following items can be set.

Items are not displayed if they cannot be set.

Items displayed in gray cannot be set.

Setting Values

OFF

Description

Turns off repeat.

Playback Settings Menu

Repeats playback of the currently played

title.

TITLE

Audio/subtitle settings

Repeats playback of the currently played

chapter.

CHAPTER

TRACK

Repeats playback of the currently played

track.

#7&+1ꢁ57$6+6.'

#7&+1ꢂ.#0)7#)'

ꢀ

.ꢁ4

ꢃ

Repeats playback within the currently

played folder.

FOLDER

%*#0)'ꢂ#7&+1ꢂ176276

57$6+6.'ꢂ.#0)7#)'

Repeats playback of the entire disc.

ALL

A-B

Repeats playback of the section between the

specified starting and ending points.

Pressing the [OK] button specifies the

displayed scene as the starting point (Point

A). Pressing the [OK] button after forwarding

playback specifies the displayed scene as the

ending point (Point B).

Memo:

CHANGE TITLE

“AUDIO/SUBTITLE” will be displayed only if they are

available in the video content. The setting value differs

depending on the content. Items that are not available in

the content cannot be set.

You can change to a different title by entering the corresponding

numeric value. Any value that is larger than the number of titles

cannot be entered.

CHANGE CHAPTER

AUDIO LANGUAGE

You can change to a different chapter by entering the

corresponding numeric value. Any value that is larger than the

number of chapters cannot be entered.

CHANGE AUDIO OUTPUT

SIGNAL TYPE (BD-ROM)

PRIMARY VIDEO

TIME JUMP

You can move to a specific playback position by entering a time.

This is not possible if the specified time is not valid.

PRIMARY AUDIO

SECONDARY VIDEO

SLIDESHOW INTERVAL

CHANGE SECONDARY VIDEO

SECONDARY AUDIO

The following items can be set.

3SEC/5SEC/10SEC/20SEC/30SEC modes

SECONDARY AUDIO LANGUAGE

SLIDESHOW EFFECTS

The following items can be set.

SUBTITLE LANGUAGE

SUBTITLE STYLE

CHANGE ANGLE

Setting Values

Description

OFF

Turns off slideshow effect.

Turns on slideshow effect. “Fade out” and

“Fade in” effects can be applied when

switching from one slide to another.

Playing Back

Video settings

PROGRESSIVE OUTPUT

The following items can be set.

Setting

Values

Description

8+&'1ꢀ5'66+0)

2+%674'ꢀ37#.+6;

014/#.

1((

AUTO1

Displays video images after they are

converted according to the film material.

&+)+6#.ꢀ01+5'ꢀ4'&7%6+10

241)4'55+8'ꢀ176276

#761ꢁ

AUTO2

In addition to the “AUTO1” option, support is

also provided for progressive videos recorded

at 30 frames per second.

VIDEO

Most suitable for video images (TV broadcast,

etc.). Select this option when playing videos

with significant movements or animated

videos.

PICTURE QUALITY

The following items can be set.

Setting Values

Description

NORMAL

CINEMA

FINE

Standard picture quality.

Effective when playing movies.

Produces sharp images with enhanced

outlines.

SOFT

Reduces noise that is prominent in the

video image.

USER

SETTING

Enables the Details setting. For more

details, refer to “DETAIL SETTING”.

DETAIL SETTING

The following items can be set.

Choose an option and press [OK] to set the respective values.

Setting Values

Description

CONTRAST

A value between “-7” and “+7” can be set.

BRIGHTNESS A value between “0” and “15” can be set.

SHARPNESS

COLOR

A value between “-6” and “+6” can be set.

A value between “-7” and “+7” can be set.

A value between “0” and “5” can be set.

GAMMA

DIGITAL NOISE REDUCTION

The following items can be set.

Setting

Values

Description

OFF

Turns off DNR (Digital Noise Reduction).

Reduces noise that is prominent in images

of lengthy videos.

Editing

Before editing

This unit mainly edits video images stored on the HDD. To edit video images stored in a disc or SD card, do so after importing

them to the HDD.

Data on a finalized disc cannot be edited. To edit a finalized disc, you have to either unfinalize the disc, or do so after importing

the data to the HDD.

Memo:

Only discs that are finalized using this unit can be unfinalized.

Editable items for different media

Items that are editable vary according to the type of media on which the video data is stored. For details, refer to the media chart

below.

Media chart

Editing option

HDD

BD-R

(BDAV)

BD-RE

(BDAV)

DVD-RW/

DVD-R

HDD/BD-

RE/SD

(picture)

Grouping

Changing the Title/Group Name

Deleting a Title/Group

Turning On Title/Group Protection

Turning Off Title/Group Protection

Creating a Playlist

Editing a Thumbnail

*1,*2

Editing a Chapter

Delete Scene

Dividing

Changing the Disc Name

Changing the Shooting Date/Time

Memo:

*1 : Supports only the “VR MODE”.

*2 : Supports only dividing and combining of chapters.

Editing

Entering characters

Entering Characters

Names can be changed or given to stored videos or groups.

You can enter characters while referring to the input on the

monitor.

Enter characters using the [0]-[9], [Z] or [#]

buttons

After character input is complete, press the

[YELLOW] button

Memo:

Character input screen

Switch between alphanumeric and symbol input by

pressing the [ w ] button.

For details on the correspondence between each button

and the input characters, refer to the “Character List”.

4'0#/'ꢎ6+6.'

Press the [ v ] button to delete an input character.

Press and hold down the [ v ] button to delete all input

characters.

4'0#/'ꢎ6*'ꢎ5'.'%6'&ꢎ6+6.'

Pressing the [RETURN] button calls up the confirmation

screen to cancel character input.

ꢀꢁ!ꢂꢃ

IJKꢅ

CDEꢄ

LMNꢆ

FGHꢍ

OPQꢇ

24'8ꢀꢎ%*#4#%6'4

2#)'ꢎ248

To cancel character input and return to the initial screen,

select “YES” and press the [OK] button.

To return to the character input screen, select “NO” and

press the [OK] button.

0':6ꢎ%*#4#%6'4

2#)'ꢎ0':6

RSTUꢈ

VWXꢉ

ꢊ

YZ[\ꢌ

ꢋ

%*#4#%6'4ꢎ6;2'

%.'#4

Up to about 20 alphanumeric characters can be displayed

on the disc menu of BDMV and DVD-VIDEO. (The number

of characters that can be displayed varies with the

character.)

5'.'%6

126+10

4'6740

':+6

%10(+4/

+0(1ꢀ%144'%6

A Function name field

B Screen description

C Input window

Note:

If you switch the screen display before confirming the input

characters, a message will appear on the screen.

To cancel character input and proceed to switch the screen

display, select “YES” and press the [OK] button.

To return to the character input screen, select “NO” and

press the [OK] button.

Characters entered appear on the input window.

D Operation guide 1

The [0]-[9], [Z], [#], [PAGE PRV ], [w] and [v] buttons are

If the converted characters exceed the maximum number of

input characters, a message will appear on the screen.

Select “OK” and press the [OK] button to delete the excess

characters and to input the remaining ones.

Select “RETURN” and press the [OK] button to restore the

unconfirmed characters.

displayed.

E Operation guide 2

[ J / K / H / I], [OK], [RETURN], [OPTION], [BLUE], [RED],

[GREEN] and [YELLOW] buttons are displayed.

F Character input keyboard

No more characters can be input if the maximum character

limit has been reached.

A character input keyboard appears during input of symbol.

You can enter characters by selecting them accordingly from

the keyboard.

Character List

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[0]

[*]

(

)

;

(

)

[

]

{

}

*1: Single-byte space

*2: Press the [#] button to return to the previous input character.

Editing

Select “GROUP”, and press the [OK] button

The selected titles and groups are now grouped together.

Grouping

Multiple titles stored on the HDD can be combined into a

group.

6+6.' ꢃ6*7/$0#+.ꢄ

0#8+)#6+10

8+&'1

2+%674'

4'/#+0 ꢀꢁꢀ

Memo:

2CIG

Only video data stored on the HDD can be grouped.

)4172

#..

)4172

6*'ꢂ5'.'%6'&ꢂ6+6.'5ꢂ9+..ꢂ$'ꢂ)4172'&ꢂ61)'6*'4

;17ꢂ%#0ꢂ/1&+(;ꢂ6*'ꢂ)4172ꢂ0#/'ꢂ(41/

̌'&+6ꢂ+0(1̍ꢂ70&'4ꢂ6*'ꢂ126+10ꢂ/'07

Grouping

)4172

$#%-

Press the [NAVIGATION] button on the remote

control unit

The Playback Navigation screen appears.

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

.+56

2+%674'

)4172

Select the titles or groups to be grouped, and

press the [MARK] button

Pressing the [MARK] button adds a check mark to the

selected titles/groups.

All titles and groups with the check mark will be grouped

together.

0#8+)#6+10

4'6740

Memo:

To cancel grouping, select “BACK” and press the [OK]

button.

Alternatively, you can press the [RETURN] button to cancel

grouping and return to the initial screen.

6+6.' ꢁ6*7/$0#+.ꢂ

0#8+)#6+10

8+&'1

2+%674'

Ungrouping

)4172

#..

Press the [NAVIGATION] button on the remote

control unit

The Playback Navigation screen appears.

Select the group to ungroup, and press the

[OPTION] button

A pop-up option list appears.

5'.'%6

126+10

24'8ꢀ2)

0':6ꢀ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

4'6740

Select “UNGROUP”, and press the [OK] button

An ungroup confirmation screen appears.

Press the [OPTION] button on the remote control

unit

A pop-up option list appears.

6+6.' ꢀ6*7/$0#+.ꢁ

0#8+)#6+10

126+105

8+&'1

2+%674'

$#%-

2.#;

Select “GROUP”, and press the [OK] button

A grouping confirmation screen appears.

)4172

#..

&'.'6'

&7$

001

002

003

004

70)4172

/1&'ꢂ%*#0)'

'&+6

6+6.'ꢁ6*7/$0#+.ꢂ

0#8+)#6+10

VKVNG

126+105

'&+6ꢂ+0(1

16*'45

8+&'1

2+%674'

005

006

007

008

$#%-

2.#;

)4172

#..

&'.'6'

&7$

)4172

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

/1&'ꢀ%*#0)'

'&+6

4'6740

'&+6ꢀ+0(1

16*'45

Memo:

You cannot ungroup multiple groups at the same time.

When multiple groups are selected, the “UNGROUP” item

does not appear in the option list.

5'.'%6

126+10

24'8ꢀ2)

0':6ꢀ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

4'6740

Editing

Select “YES”, and press the [OK] button

All titles within the selected group are ungrouped.

Press the [OPTION] button on the remote control

unit

A pop-up option list appears.

6+6.' ꢂ6*7/$0#+.ꢃ

0#8+)#6+10

8+&'1

Select “DO NOT GROUP”, and press the [OK]

button

A confirmation screen for group exclusion appears.

2+%674'

4'/#+0 ꢀꢁꢀ

2CIG

)4172

#..

Select “YES”, and press the [OK] button

The selected titles are now excluded from the group.

70)4172

6*'ꢄ5'.'%6'&ꢄ)4172ꢄ9+..ꢄ$'ꢄ70)4172'&

70)4172!

;'5

6+6.'ꢃ6*7/$0#+.ꢄ

0#8+)#6+10

8+&'1

2+%674'

4'/#+0 ꢀꢁꢀ

2CIG

)4172

#..

5'.'%6

126+10

24'8ꢄ2)

0':6ꢄ2)

':+6

.+56

2+%674'

)4172

0#8+)#6+10

4'6740

&1ꢂ016ꢂ)4172

6*'ꢂ5'.'%6'&ꢂ6+6.'ꢃ5ꢄꢂ9+..ꢂ$'ꢂ4'/18'&ꢂ(41/ꢂ6*+5ꢂ)4172

4'/18'ꢂ(41/ꢂ)4172!

Memo:

;'5

To cancel ungrouping, select “NO” and press the [OK]

button.

Alternatively, you can press the [RETURN] button to cancel

ungrouping and return to the initial screen.

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

.+56

2+%674'

)4172

0#8+)#6+10

4'6740

Memo:

Excluding from a group

To cancel, select “NO” and press the [OK] button.

You can select titles and exclude them from a group.

Alternatively, you can press the [RETURN] button to cancel

group exclusion and return to the initial screen.

Press the [NAVIGATION] button on the remote

control unit

The Playback Navigation screen appears.

Select the titles to exclude from the group, and

press the [MARK] button

Pressing the [MARK] button adds a check mark to the

selected titles/groups.

All titles with the check mark will be excluded from the

group.

6+6.' ꢁ6*7/$0#+.ꢂ

0#8+)#6+10

8+&'1

2+%674'

)4172

#..

5'.'%6

126+10

24'8ꢀ2)

0':6ꢀ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

4'6740

Editing

Changing the Title/Group

Name

Deleting a Title/Group

Titles/groups can be deleted. When you delete a group, all

titles contained within the group are deleted.

The saved title/group name can be changed as follows.

Memo:

When a title/group is deleted from the HDD, BD-RE, or

A title/group name can be added to video data stored on

DVD-RW, the remaining space on the media increases

according to the size of the deleted title/group.

Deleting a title/group from a BD-R or DVD-R does not

increase the amount of available space on the disc.

the HDD, BD-RE, BD-R, DVD-RW, or DVD-R, and the

name can be changed.

Video data stored on a DVD-RW or DVD-R in the Video

mode cannot be changed.

Press the [NAVIGATION] button on the remote

control unit

Press the [NAVIGATION] button on the remote

control unit

The Playback Navigation screen appears.

Select the titles/groups to delete, and press the

[OPTION] button

Select the title/group for which the name is to be

changed, and press the [OPTION] button

A pop-up option list appears.

Select “DELETE”, and press the [OK] button

Select “EDIT INFO”, and press the [OK] button

A confirmation screen for title/group deletion appears.

An information editing screen appears.

6+6.' ꢀ6*7/$0#+.ꢁ

0#8+)#6+10

126+105

6+6.' ꢀ6*7/$0#+.ꢁ

8+&'1

2+%674'

0#8+)#6+10

8+&'1

126+105

$#%-

2+%674'

2.#;

$#%-

)4172

#..

&'.'6'

&7$

2.#;

)4172

#..

&'.'6'

&7$

001

002

003

004

/1&'ꢂ%*#0)'

'&+6

001

002

003

004

/1&'ꢂ%*#0)'

'&+6

'&+6ꢂ+0(1

VKVNG

16*'45

'&+6ꢂ+0(1

16*'45

005

006

007

008

VKVNG

005

006

007

008

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

4'6740

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

4'6740

Select “DELETE”, and press the [OK] button

The selected titles/groups are deleted.

Select “MODIFY TITLE NAME” or “MODIFY

GROUP NAME”, and press the [OK] button

A title/group name modifying screen appears.

6+6.'ꢁ6*7/$0#+.ꢂ

0#8+)#6+10

4'/#+0 ꢃꢄꢃ

8+&'1

2+%674'

2CIG

6+6.' ꢁ6*7/$0#+.ꢂ

0#8+)#6+10

)4172

#..

4'/#+0 ꢃꢄꢃ

8+&'1

2+%674'

2CIG

001

002

003

004

&'.'6'

)4172

#..

+0(14/#6+10ꢀ%144'%6

&1ꢀ;17ꢀ9#06ꢀ61ꢀ&'.'6'!

001

002

003

004

VKVNG

/1&+(;ꢀ6+6.'ꢀ0#/'

/1&+(;ꢀ6*7/$0#+.

&'.'6'

$#%-

005

006

007

008

VKVNG

%*#0)'ꢀ5*116+0)ꢀ&#6'ꢅ6+/'

005

006

008

2416'⁰%⁰6⁷

5'.'%6

':+6

24'8ꢀ2)

0':6ꢀ2)

.+56

2+%674'

)4172

0#8+)#6+10

126+10

4'6740

5'.'%6

126+10

24'8ꢀ2)

0':6ꢀ2)

':+6

.+56

2+%674'

)4172

0#8+)#6+10

4'6740

Memo:

To cancel the title/group deletion operation, select “BACK”

and press the [OK] button.

Modify the title/group name

The modified title/group name is now saved.

Alternatively, you can press the [RETURN] button to cancel

the deletion operation and return to the initial screen.

Memo:

For details on the method of character input, refer to

“Entering Characters” (A page 59) .

Editing

Select “PROTECT”, and press the [OK] button

If only a single title was selected in step 2, a confirmation

screen for title protection will appear.

Turning On Title/Group

Protection

6+6.' ꢂ6*7/$0#+.ꢃ

Titles/groups can be protected.

0#8+)#6+10

8+&'1

2+%674'

4'/#+0 ꢀꢁꢀ

Editing and deletion cannot be performed on protected titles/

groups.

2CIG

)4172

#..

Title/group protection can be turned on for video data

2416'%6

stored on the HDD, BD-RE (BDAV), BD-R (BDAV), and

DVD-RW (VR).

6*'ꢄ5'.'%6'&ꢄ6+6.'ꢄ9+..ꢄ$'ꢄ2416'%6'&

&1ꢄ;17ꢄ9#06ꢄ61ꢄ5'6ꢄ2416'%6+10!

;'5

Press the [NAVIGATION] button on the remote

control unit

The Playback Navigation screen appears.

Select the titles/groups to be protected, and

press the [OPTION] button

A pop-up option list appears.

5'.'%6

126+10

24'8ꢄ2)

0':6ꢄ2)

':+6

.+56

2+%674'

)4172

0#8+)#6+10

4'6740

If multiple titles or groups were selected in step 2,

“PROTECT” and “UNPROTECT” items will be displayed.

6+6.' ꢀ6*7/$0#+.ꢁ

0#8+)#6+10

8+&'1

126+105

2+%674'

Select “YES” or “PROTECT”, and press the [OK]

button

The selected titles/groups are now protected.

$#%-

2.#;

)4172

#..

&'.'6'

&7$

001

002

003

004

/1&'ꢂ%*#0)'

'&+6

Memo:

All selected titles and groups will be protected when

multiple titles or groups are selected.

'&+6ꢂ+0(1

16*'45

VKVNG

005

006

007

008

To turn off the title/group protection, select “NO” and press

the [OK] button.

Alternatively, you can press the [RETURN] button to turn

off the protection and return to the initial screen.

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

4'6740

Select “EDIT INFO”, and press the [OK] button

An information editing screen appears.

6+6.' ꢁ6*7/$0#+.ꢂ

0#8+)#6+10

4'/#+0 ꢃꢄꢃ

8+&'1

2+%674'

2CIG

)4172

#..

+0(14/#6+10ꢀ%144'%6

001

002

003

004

/1&+(;ꢀ6+6.'ꢀ0#/'

/1&+(;ꢀ6*7/$0#+.

VKVNG

%*#0)'ꢀ5*116+0)ꢀ&#6'ꢅ6+/'

005

006

008

2416'⁰%⁰6⁷

5'.'%6

126+10

':+6

.+56

2+%674'

)4172

24'8ꢀ2)

0':6ꢀ2)

0#8+)#6+10

4'6740

Editing

Select “UNPROTECT”, and press the [OK] button

If only a single title was selected in step 2, a confirmation

screen for turning off protection will appear.

Turning Off Title/Group

Protection

Protection of a title/group can be turned off.

Titles/groups can be edited and deleted after their protection

is turned off.

6+6.' ꢃ6*7/$0#+.ꢄ

0#8+)#6+10

8+&'1

2+%674'

(4''ꢂ52#%' ꢀꢁꢀ

2CIG

)4172

#..

Title/group protection can be turned off for video data

702416'%6

::ꢂ6+6.'5ꢂ*#8'ꢂ$''0ꢂ5'.'%6'&ꢂ61ꢂ4'/18'ꢂ6*'ꢂ2416'%6+10

stored on the HDD, BD-RE (BDAV), BD-R (BDAV), and

DVD-RW (VR).

;'5

Press the [NAVIGATION] button on the remote

control unit

The Playback Navigation screen appears.

Select the titles/groups to turn off protection for,

and press the [OPTION] button

A pop-up option list appears.

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

.+56

2+%674'

)4172

0#8+)#6+10

4'6740

If multiple titles or groups were selected in step 2,

“UNPROTECT” and “PROTECT” items will be displayed.

6+6.' ꢀ6*7/$0#+.ꢁ

0#8+)#6+10

8+&'1

126+105

2+%674'

Select “YES”, and press the [OK] button

Protection of the selected titles/groups is now turned off.

$#%-

2.#;

)4172

#..

&'.'6'

&7$

Memo:

001

002

003

004

/1&'ꢂ%*#0)'

'&+6

Protection will be turned off from all selected titles and

groups when multiple titles or groups are selected.

'&+6ꢂ+0(1

16*'45

VKVNG

If you do not want to turn off the title/group protection,

select “NO” and press the [OK] button.

005

006

007

008

Alternatively, you can press the [RETURN] button to cancel

protection removal and return to the initial screen.

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

4'6740

Select “EDIT INFO”, and press the [OK] button

An information editing screen appears.

6+6.' ꢁ6*7/$0#+.ꢂ

0#8+)#6+10

4'/#+0 ꢃꢄꢃ

8+&'1

2+%674'

2CIG

)4172

#..

+0(14/#6+10ꢀ%144'%6

001

002

003

004

/1&+(;ꢀ6+6.'ꢀ0#/'

/1&+(;ꢀ6*7/$0#+.

VKVNG

%*#0)'ꢀ5*116+0)ꢀ&#6'ꢅ6+/'

005

006

008

702416⁰'⁰%⁷6

5'.'%6

126+10

':+6

.+56

2+%674'

)4172

24'8ꢀ2)

0':6ꢀ2)

0#8+)#6+10

4'6740

Editing

Edit the playlist accordingly by selecting

chapters from the source title according to your

preference

Edit the playlist.

For details, refer to “Editing the playlist”.

Creating a Playlist

A playlist can be created from the video titles on the HDD.

Playlists can only be created for titles that are stored on the

HDD.

Playlist

: Enables you to create a program by selecting

chapters from a specific title and editing their

playback sequence.

2.#;.+56ꢃ'&+6

5#8'ꢃ2.#;.+56

'&+6ꢃ2.#;.+56

5174%'ꢃ6+6.'

2CIG

Memo:

The playlist created comes in handy during playback and

dubbing to a disc.

ꢀꢀꢁ ꢀꢂꢀꢀꢂꢀꢀ

6#4)'6ꢃ2.#;.+56

Creating a Playlist

ꢀꢀꢁ ꢀꢂꢀꢀꢂꢀꢀ

Press the [NAVIGATION] button on the remote

control unit

The Playback Navigation screen appears.

5'.'%6

126+10

24'8ꢃ2)

0':6ꢃ2)

':+6

'&+6

5#8'

4'6740

Select the title for which a playlist is to be

created, and press the [OPTION] button

Press the [YELLOW] button on the remote

control unit

A playlist is created.

Select “EDIT”, and press the [OK] button

The Edit menu screen appears.

Editing the playlist

6+6.' ꢀ6*7/$0#+.ꢁ

0#8+)#6+10

8+&'1

126+105

2+%674'

Chapter insertion

$#%-

2.#;

① Select the chapter to insert from the thumbnails of

the “SOURCE TITLE”, and press the [OK] button

② Select the position to insert the chapter from the

“TARGET PLAYLIST”, and press the [OK] button

)4172

#..

&'.'6'

&7$

001

002

003

004

&1ꢂ016ꢂ)4172

/1&'ꢂ%*#0)'

'&+6

VKVNG

'&+6ꢂ+0(1

16*'45

005

006

007

008

Chapter deletion

① Select the chapter to delete from the thumbnails of

the “TARGET PLAYLIST”, and press the [OK] button

② Select “DELETE”, and press the [OK] button

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

4'6740

Entering the playlist name

Select “PLAYLIST EDIT”, and press the [OK]

button

The playlist edit screen appears.

① Select “TARGET PLAYLIST”, and press the [OK]

button.

② Enter a playlist name, and press the [OK] button

Memo:

6+6.' ꢁ6*7/$0#+.ꢂ

0#8+)#6+10

8+&'1

For details on the method of character input, refer to

4'/#+0 ꢃꢄꢃ

2+%674'

“Entering Characters”.

2CIG

Note:

)4172

#..

'&+6

Deleting the original title list will cause the playlist to be

001

002

003

004

deleted as well.

Editing the original title list, or changing the recording mode

may cause the playlist to be deleted.

%*#26'4ꢀ'&+6

2.#;.+56ꢀ'&+6

&'.'6'ꢀ5%'0'

VKVNG

005

006

007

&+8+&'

008

5'.'%6

24'8ꢀ2)

0':6ꢀ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

126+10

4'6740

Editing

Select “CHANGE”, and press the [OK] button

The displayed still image now becomes the thumbnail

image.

Editing a Thumbnail

Thumbnails (index images) can be changed to a still image

according to your preference.

Select “CONFIRM”, and press the [OK] button

Doing so ends the editing of thumbnails.

Memo:

Thumbnails of titles stored on the HDD, BD-RE, BD-R,

Memo:

DVD-RW, and DVD-R can be edited.

You can also display the thumbnail modification screen

from the Playback Navigation screen.

However, thumbnails of titles that are stored on an SD card

or finalized disc cannot be edited.

① Select the title for which the thumbnail is to be

changed, and press the [OPTION] button

Press the [INFORMATION CORRECT] button on

the remote control unit

An information editing screen appears.

② Select “EDIT INFO”, and press the [OK] button

An information editing screen appears.

6+6.' ꢀ6*7/$0#+.ꢁ

0#8+)#6+10

126+105

8+&'1

2+%674'

$#%-

2.#;

)4172

#..

&'.'6'

&7$

001

002

003

004

+0(14/#6+10ꢀ%144'%6

/1&'ꢂ%*#0)'

'&+6

/1&+(;ꢀ6+6.'ꢀ0#/'

/1&+(;ꢀ6*7/$0#+.

%*#0)'ꢀ5*116+0)ꢀ&#6'ꢁ6+/'

2416'%6

'&+6ꢂ+0(1

16*'45

VKVNG

005

006

007

008

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

4'6740

③ Select “MODIFY THUMBNAIL”, and press the [OK]

Select “MODIFY THUMBNAIL”, and press the

[OK] button

A thumbnail modification screen appears.

button

A thumbnail modification screen appears.

Play the video, and press the [W] button to stop

at the scene you want to use as thumbnail

display

6+6.' ꢁ6*7/$0#+.ꢂ

0#8+)#6+10

8+&'1

4'/#+0 ꢃꢄꢃ

2+%674'

2CIG

)4172

#..

+0(14/#6+10ꢀ%144'%6

001

002

003

004

/1&+(;ꢃ6*7/$0#+.

/1&+(;ꢀ6+6.'ꢀ0#/'

/1&+(;ꢀ6*7/$0#+.

;17ꢃ%#0ꢃ%*#0)'ꢃ6*'ꢃ6+6.'ꢃ6*7/$0#+.5

;17ꢃ%#0ꢃ'&+6ꢃ6*'ꢃ6+6.'ꢃ61ꢃ8+'9ꢃ$;ꢃ%*#26'45

VKVNG

%*#0)'ꢀ5*116+0)ꢀ&#6'ꢅ6+/'

005

006

008

2416'⁰%⁰6⁷

ꢀꢁꢀꢀꢁꢀꢀ

%*#0)'

%10(+4/

5'.'%6

126+10

':+6

.+56

2+%674'

)4172

24'8ꢀ2)

0':6ꢀ2)

0#8+)#6+10

4'6740

6*7/$0#+.

- : -- : --

5'.'%6

':+6

+0(1ꢂ%144'%6

126+10

4'6740

Memo:

For details on how to play videos, refer to “Video Playback

Operation” (A page 51) .

Editing

Editing a chapter

Editing a Chapter

Press the [EDIT] button on the remote control

Creating a chapter mark for a saved title enables you to find a

specific scene within the title.

unit

The Edit menu screen appears.

Memo:

Select “CHAPTER EDIT”, and press the [OK]

button

The title screen appears.

All chapter editing functions can be performed on titles

stored on the HDD.

Titles stored on a BD-RE (BDAV), BD-R (BDAV), DVD-R

(VR), or DVD-RW (VR) only allow chapters to be divided or

combined.

The chapters of titles that are stored on an SD card or

finalized disc cannot be edited.

Also, protected titles cannot be edited. To perform chapter

'&+6

edit of a title, turn off the protection.

%*#26'4ꢀ'&+6

2.#;.+56ꢀ'&+6

For details on turning off protection of a title, refer to “Turning

Off Title/Group Protection” (A page 64) .

&'.'6'ꢀ5%'0'

&+8+&'

Chapter edit functions

Chapter mark insertion (divide chapter)

Divides a chapter by inserting a chapter mark.

Chapter mark deletion (combine chapters)

Select a title, and press the [OK] button

Combine chapters by deleting the chapter mark.

Memo:

The chapter edit screen can also be called up from the

Chapter deletion

Playback Navigation screen.

Deletes a specified chapter.

① Select the title to perform chapter edit, and press the

[OPTION] button

② Select “EDIT”, and press the [OK] button

6+6.' ꢀ6*7/$0#+.ꢁ

0#8+)#6+10

126+105

8+&'1

2+%674'

$#%-

2.#;

)4172

#..

&'.'6'

&7$

001

002

003

004

&1ꢂ016ꢂ)4172

/1&'ꢂ%*#0)'

'&+6

VKVNG

'&+6ꢂ+0(1

16*'45

005

006

007

008

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

4'6740

③ Select “CHAPTER EDIT”, and press the [OK] button

6+6.'ꢁ6*7/$0#+.ꢂ

0#8+)#6+10

4'/#+0 ꢃꢄꢃ

8+&'1

2+%674'

2CIG

)4172

#..

'&+6

001

002

003

004

%*#26'4ꢀ'&+6

2.#;.+56ꢀ'&+6

&'.'6'ꢀ5%'0'

VKVNG

005

006

007

&+8+&'

008

5'.'%6

24'8ꢀ2)

0':6ꢀ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

126+10

4'6740

For details on how to play videos, refer to “Video Playback

Operation” (A page 51) .

Frame movement on the Chapter Edit screen can only be

performed one frame at a time regardless of the “STILL

MODE” (A page 77) setting.

Editing

Deleting a video chapter

Select the chapter for which you want to delete

the video from the chapter edit screen

Editing a Chapter

(Continued)

Press the [DELETE] button on the remote control

unit

A confirmation screen for deleting the chapter appears.

Chapter mark insertion (divide chapter)

Play the video, and press the [W] button to stop

at the scene you want to add a chapter mark

Press the [MARK] button on the remote control

unit

A chapter mark is inserted into the paused scene.

%%**##2266''4ꢀ4'ꢀ&'+&6+6

;17ꢀ%#0ꢀ'&+6ꢀ6*'ꢀ6+6.'ꢀ61ꢀ8+'9ꢀ$;ꢀ%*#26'45

2CIG

%*#26'4ꢀ'&+6

%**##2266''4ꢀ4'ꢀ&'+&6+6

6*'ꢀ52'%+(+'&ꢀ%*#26'4ꢀ9+..ꢀ$'ꢀ&'.'6'&

&'.'6'&ꢀ&#6#ꢀ%#0016ꢀ$'ꢀ4'5614'&

;17ꢀ%#0ꢀ'&+6ꢀ6*'ꢀ6+6.'ꢀ61ꢀ8+'9ꢀ$;ꢀ%*#26'45

2CIG

&'.'6'

%#0%'.

%10(+4/

001

0 : 00 : 00

5'.'%6

126+10

24'8ꢀ2)

0':6ꢀ2)

':+6

'&+6

4'6740

Select “DELETE”, and press the [OK] button

The selected video chapter is deleted.

001

0 : 00 : 00

5'.'%6

126+10

':+6

'&+6

24'8ꢀ2)

0':6ꢀ2)

4'6740

Note:

Videos cannot be restored once they are deleted.

Memo:

Deletion of the video may fail if the length of the chapter is

too short.

The chapter is now divided into two parts at the position of

the chapter mark.

Chapter mark deletion (combine chapters)

Chapter options

Pressing the [OPTION] button on the remote control when the

Chapter Edit screen is displayed enables you to perform the

following editing operations.

Play the video, and press the [W] and [ H / I ]

buttons to display the scene for which you want

to delete the chapter mark

Press the [MARK] button on the remote control

unit

A confirmation screen for deleting the chapter mark

appears.

Combining with previous chapter

Combines the selected chapter with the previous chapter.

① Select a chapter, followed by “COMB. W/PREV CH”,

and press the [OK] button

Combines chapters.

%*#26'4ꢀ'&+6

;17ꢀ%#0ꢀ'&+6ꢀ6*'ꢀ6+6.'ꢀ61ꢀ8+'9ꢀ$;ꢀ%*#26'45

2CIG

Combining with next chapter

Combines the selected chapter with the next chapter.

%*#26'4ꢀ'&+6

① Select a chapter, followed by “COMB. W/NEXT CH”,

%*#26'4ꢀ/#4-ꢀ#.4'#&;ꢀ':+565ꢁ

&1ꢀ;17ꢀ9#06ꢀ61ꢀ&'.'6'ꢀ6*'

':+56+0)ꢀ%*#26'4ꢀ/#4-!

and press the [OK] button

Combines chapters.

;'5

Combining all chapters

Combines all chapters.

001

0 : 00 : 00

5'.'%6

126+10

① Select “COMB. ALL CHAP.”, and press the [OK]

24'8ꢀ2)

0':6ꢀ2)

':+6

'&+6

4'6740

button

A confirmation screen for combining all the chapters is

Select “YES”, and press the [OK] button

The chapter mark is deleted from the selected scene.

displayed.

② Select “YES”, and press the [OK] button

Combines all the chapters.

Memo:

The chapters before and after the position of the chapter

mark are now combined.

Pressing the [T / S] button displays the next/previous

page.

Editing

Select “EXECUTE”, and press the [OK] button

A confirmation screen for performing dividing appears.

Dividing

You can select a saved title and divide it into two titles.

&+8+&'

Memo:

Dividing can only be applied to titles stored on the HDD.

;17ꢀ%#0ꢀ&+8+&'ꢀ6*'ꢀ6+6.'

'&+6ꢀ6*'ꢀ6+ .'ꢀ61ꢀ8+'9ꢀ$;ꢀ%*#26'45

Titles that are protected cannot be divided. To divide a title,

turn off the protection.

For details on turning off the title protection, refer to “Turning

Off Title/Group Protection” (A page 64) .

&+8+&+0)ꢀ21+06

':'%76'

14+)+0#.

&+8+&+0)ꢀ21+06

Dividing

001

0 : 00 : 00

- : -- : --

5'.'%6

':+6

Press the [EDIT] button on the remote control

unit

The Edit menu screen appears.

4'6740

'&+6

126+10

Select “DIVIDE”, and press the [OK] button

The title screen appears.

Dividing starts.

&+8+&'

;17ꢀ%#0ꢀ&+8+&'ꢀ6*'ꢀ6+6.'

'&+6ꢀ6*'ꢀ6+ .'ꢀ61ꢀ8+'9ꢀ$;ꢀ%*#26'45

'&+6

&+8+&'

70#$.'ꢀ61ꢀ4'5614'ꢀ6*'ꢀ14+)+0#.ꢀ&#6#ꢀ10%'ꢀ+6ꢀ+5ꢀ&+8+&'&ꢁ

&+8+&+0)ꢀ21+06

%*#26'4ꢀ'&+6

2.#;.+56ꢀ'&+6

&1ꢀ;17ꢀ9#06ꢀ61ꢀ&+8+&'!

':'%76'

&+8+&'

%#0%'.

&'.'6'ꢀ5%'0'

&+8+&'

14+)+0#.

&+8+&+0)ꢀ21+06

001

0 : 00 : 00

- : -- : --

5'.'%6

':+6

'&+6

4'6740

126+10

Select a title, and press the [OK] button

Play the video, and press the [W] button at the

scene where you want to perform dividing

Select “DIVIDING POINT”, and press the [OK]

button

&+8+&'

;17ꢀ%#0ꢀ&+8+&'ꢀ6*'ꢀ6+6.'

;17ꢀ%#0ꢀ'&+6ꢀ6*'ꢀ6+6.'ꢀ61ꢀ8+'9ꢀ$;ꢀ%*#26'45

&+8+&+0)ꢀ21+06

':'%76'

14+)+0#.

&+8+&+0)ꢀ21+06

001

0 : 00 : 00

- : -- : --

5'.'%6

126+10

4'6740

':+6

'&+6

Memo:

For details on how to play videos, refer to “Video Playback

Operation” (A page 51) .

Frame movement on the Chapter Edit screen can only be

performed one frame at a time regardless of the “STILL

MODE” (A page 77) setting.

Editing

Dividing (Continued)

Delete Scenes

Unwanted scenes of a saved title can be deleted.

Doing so helps to increase the free space on the disc.

Memo:

To cancel the dividing operation, select “CANCEL” and

press the [OK] button.

Memo:

Alternatively, you can press the [RETURN] button to cancel

Deleting scenes can only be applied to titles stored on the

the divide operation and return to the initial screen.

HDD.

The dividing edit screen can also be called up from the

Titles that are protected cannot be deleted. To enable

Playback Navigation screen.

scene delete of a title, turn off the protection.

① Select the titles to divide, and press the [OPTION]

button

For details on turning off the title protection, refer to “Turning

Off Title/Group Protection” (A page 64) .

② Select “EDIT”, and press the [OK] button

HD content for which the delete scene operation has been

applied cannot be dubbed to BDMV. Perform seamless

conversion before starting a dubbing operation.

6+6.' ꢀ6*7/$0#+.ꢁ

0#8+)#6+10

8+&'1

126+105

2+%674'

For details, refer to “Mode conversion” (A page 73) .

$#%-

2.#;

)4172

#..

&'.'6'

&7$

001

002

003

004

Delete Scenes

&1ꢂ016ꢂ)4172

/1&'ꢂ%*#0)'

'&+6

Press the [EDIT] button on the remote control

unit

VKVNG

'&+6ꢂ+0(1

16*'45

005

006

007

008

The Edit menu screen appears.

Select “DELETE SCENE”, and press the [OK]

button

Displays the Title Display screen.

5'.'%6

126+10

24'8ꢂ2)

0':6ꢂ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

4'6740

③ Select “DIVIDE”, and press the [OK] button

6+6.' ꢁ6*7/$0#+.ꢂ

0#8+)#6+10

4'/#+0 ꢃꢄꢃ

8+&'1

2+%674'

'&+6

2CIG

)4172

#..

'&+6

%*#26'4ꢀ'&+6

2.#;.+56ꢀ'&+6

001

002

003

004

%*#26'4ꢀ'&+6

2.#;.+56ꢀ'&+6

&'.'6'ꢀ5%'0'

&+8+&'

VKVNG

005

006

007

&+8+&'

008

5'.'%6

24'8ꢀ2)

0':6ꢀ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

126+10

4'6740

Select a title, and press the [OK] button

Edit the delete scene section

Follow the steps below to edit the section for which delete

scene is to be applied.

Editing

Select “EXECUTE”, and press the [OK] button

A confirmation screen for performing scene delete appears.

① Play the video, and press the [W] button at the point

where you want to start the delete operation

② Select “START”, and press the [OK] button

Select “EXECUTE”, and press the [OK] button

Scene deletion starts.

&'.'6'ꢂ5%'0'

;17ꢂ%#0ꢂ&'.'6'ꢂ5%'0'5

ꢀꢁꢀꢀꢁꢀꢀ

&'.'6'ꢃ5%'0'

;17ꢃ%#0ꢃ&'.'6'ꢃ5%'0'5

56#46

'0&

ꢀꢁꢀꢀꢁꢀꢂ

0':6

&'.'6'ꢃ5%'0'

56#46

'0&

':'%76'

6*'ꢃ52'%+(+'&ꢃ5'%6+10ꢃꢄ::ꢃ5')/'06ꢄ5ꢅꢅꢃ9+..ꢃ$'ꢃ&'.'6'&

':'%76'

56#46

%#0%'.

56#46

'0&

- : -- : --

'0&

5'.'%6

126+10

4'6740

':+6

'&+6

001

0 : 00 : 00

001

4'6740

0 : 00 : 09

5'.'%6

126+10

':+6

'&+6

③ Play the video, and press the [W] button at the point

where you want to end the delete operation

④ Select “END”, and press the [OK] button

Memo:

To cancel the delete scene operation, select “CANCEL”

and press the [OK] button.

&'.'6'ꢃ5%'0'

;17ꢃ%#0ꢃ&'.'6'ꢃ5%'0'5

ꢀꢁꢀꢀꢁꢀꢂ

Alternatively, you can press the [RETURN] button to cancel

delete scene and return to the initial screen.

56#46

'0&

0':6

':'%76'

56#46

'0&

001

0 : 00 : 03

- : -- : --

5'.'%6

126+10

4'6740

':+6

'&+6

⑤ To continue specifying other sections to delete,

select “NEXT”, and press the [OK] button

&'.'6'ꢄ5%'0'

;17ꢄ%#0ꢄ&'.'6'ꢄ5%'0'5

ꢀꢁꢀꢀꢁꢂꢃ

56#46

'0&

0':6

':'%76'

56#46

'0&

001

0 : 00 : 03

001

4'6740

0 : 00 : 17

5'.'%6

126+10

':+6

'&+6

⑥ Repeat Steps 1 to 4 to specify the sections to delete

Memo:

For details on how to play videos, refer to “Video Playback

Operation” (A page 51) .

Frame movement on the Chapter Edit screen can only be

performed one frame at a time regardless of the “STILL

MODE” (A page 77) setting.

Editing

Changing the Disc Name

Changing the Shooting

Date/Time

The name of a BD or DVD disc can be changed as follows.

Set the BD or DVD for which the disc name is to

be changed on the disc tray

The date/time of the stored video can be changed as follows.

The shooting date/time of videos stored on the HDD can be

changed.

Press the [MEDIA MANAGE] button on the

remote control unit

Press the [INFORMATION CORRECT] button on

the remote control unit

The Media Management menu screen appears.

An information correct screen appears.

/'&+#ꢀ/#0#)'/'06

$&ꢁ&8&

(14/#6

(+0#.+<'

4'0#/'ꢀ&+5%

5&ꢀ%#4&

+0(14/#6+10ꢀ%144'%6

/1&+(;ꢀ6+6.'ꢀ0#/'

/1&+(;ꢀ6*7/$0#+.

%*#0)'ꢀ5*116+0)ꢀ&#6'ꢁ6+/'

2416'%6

(14/#6

$&ꢂ8+&'1ꢀ&#6#ꢀ'4#5'

*&&

(14/#6

Select “RENAME DISC” under “BD/DVD”, and

press the [OK] button

A disc name modification screen appears.

Select “CHANGE SHOOTING DATE/TIME”, and

press the [OK] button

A thumbnail screen appears.

4'0#/'ꢎ&+5%

Select the title for which the shooting date/time

is to be changed, and press the [OK] button

The screen for changing the shooting date/time appears.

2.'#5'ꢎ4'0#/'ꢎ6*'ꢎ&+5%

ꢀꢁ!ꢂꢃ

IJKꢅ

CDEꢄ

LMNꢆ

FGHꢍ

OPQꢇ

24'8ꢀꢎ%*#4#%6'4

2#)'ꢎ248

Change the shooting date/time

Perform the following steps to change the shooting date/

time.

0':6ꢎ%*#4#%6'4

2#)'ꢎ0':6

RSTUꢈ

VWXꢉ

ꢊ

YZ[\ꢌ

ꢋ

%*#4#%6'4ꢎ6;2'

%.'#4

6+6.' ꢄ6*7/$0#+.ꢅ

+0(1ꢀꢁ%144'%6

8+&'1

2+%674'

4'/#+0 ꢂꢃꢂ

5'.'%6

126+10

2CIG

4'6740

':+6

%10(+4/

/'&+#ꢎ/#0#)'

)4172

#..

%*#0)'ꢁ5*116+0)ꢁ&#6'ꢉ6+/'

;'#4

/106*ꢉ&#;

6+/'

ꢂꢆꢆꢇ

,#0ꢉꢆꢊ

ꢃꢈꢂꢂ

Modifying the Disc Name

The new disc name is now saved.

'06'4

Memo:

For details on the method of character input, refer to

“Entering Characters” (A page 59) .

5'.'%6

126+10

24'8ꢁ2)

0':6ꢁ2)

':+6

.+56

2+%674'

)4172

+0(1ꢀꢁ%144'%6

4'6740

① Use the [ J ] and [ K ] buttons to move the cursor to

the item you want to change

② Press the [OK] button to display the pop-up screen

③ Use the [ J ] and [ K ] buttons to select a desired

value

④ Press the [OK] button to choose the value

⑤ Repeat Steps 1 to 4 to change settings for any

desired items

Editing

Select “ENTER”, and press the [OK] button

The modified shooting date/time is saved.

Mode conversion

Memo:

You can convert HD quality video titles saved on the HDD if

they are recorded in the DR, AVC, AF, AN, AL, or AE mode.

Alternatively, you can press the [RETURN] button to cancel

the shooting date/time modification and return to the initial

screen.

Seamless

conversion

: Seamless conversion can be performed to

enable smooth playback of joined scenes

after dubbing to a BD. (Titles recorded in

the DR recording mode h seamless)

The shooting date/time modification will not be reflected on

a title that was dubbed.

Pressing the [OPTION] button in the playback navigation

screen instead of the [INFORMATION CORRECT] button

will also display the shooting date/time edit screen.

Recording

mode

conversion

: Enables conversion of recording mode.

(Titles recorded in the DR, AVC, AF, AN,

AL, or AE mode hAF/AN/AL/AE/XP/SP/LP/

EP)

① Select the title for which the shooting date/time is to

be changed, and press the [OPTION] button

② Select “EDIT INFO”, and press the [OK] button

Memo:

As seamless conversion does not re-encode video and

audio, there is no deterioration in the image quality.

6+6.' ꢀ6*7/$0#+.ꢁ

0#8+)#6+10

126+105

Re-encoding is performed during recording mode

conversion.

8+&'1

2+%674'

$#%-

2.#;

)4172

#..

&'.'6'

&7$

Only titles that are recorded in the DR mode enable

conversion to the XP/SP/LP/EP mode.

001

002

003

004

/1&'ꢂ%*#0)'

'&+6

To apply “MODE CHANGE” after turning off the power,

select “AFTER POWER OFF” for “START METHOD” under

the “MODE CHANGE”.

'&+6ꢂ+0(1

16*'45

VKVNG

005

006

007

008

Note:

When seamless conversion is performed, the chapters

5'.'%6

126+10

(excluding joints of scenes) will be combined. To divide the

chapters, insert chapter marks after seamless conversion.

For details on dividing the chapters, refer to “Chapter mark

insertion (divide chapter)” (A page 68) .

24'8ꢂ2)

0':6ꢂ2)

':+6

0#8+)#6+10

.+56

2+%674'

)4172

4'6740

③ Select “CHANGE SHOOTING DATE/TIME”, and press

the [OK] button

Press the [NAVIGATION] button on the remote

control

6+6.' ꢁ6*7/$0#+.ꢂ

0#8+)#6+10

4'/#+0 ꢃꢄꢃ

8+&'1

2+%674'

Select a title/group, and press the [OPTION]

button

2CIG

)4172

#..

+0(14/#6+10ꢀ%144'%6

Select “MODE CHANGE” from the Option menu,

and press the [OK] button

The “MODE CHANGE” screen appears.

001

002

003

004

/1&+(;ꢀ6+6.'ꢀ0#/'

/1&+(;ꢀ6*7/$0#+.

VKVNG

%*#0)'ꢀ5*116+0)ꢀ&#6'ꢅ6+/'

005

006

008

2416'⁰%⁰6⁷

6+6.' ꢂ6*7/$0#+.ꢃ

0#8+)#6+10

ꢀꢁꢀ

4'/#+0

8+&'1

2+%674'

2CIG

5'.'%6

126+10

)4172

#..

':+6

.+56

2+%674'

)4172

24'8ꢀ2)

0':6ꢀ2)

0#8+)#6+10

4'6740

/1&'ꢄ%*#0)'

&1ꢄ016ꢄ)4172

/1&'

56#46ꢄ/'6*1&

5'#/.'55

+//'&+#6'

%10(+4/

5'.'%6

126+10

24'8ꢄ2)

0':6ꢄ2)

':+6

.+56

2+%674'

)4172

0#8+)#6+10

4'6740

Select a recording mode from “MODE CHANGE”,

and press the [OK] button

Select “CONFIRM”, and press the [OK] button

Settings Menu

DOWN MIX ....................................................... (A page 78)

DIGITAL OUT ................................................... (A page 78)

PCM DOWN SAMPLING .............................. (A page 78)

Dolby Digital .................................................. (A page 78)

Dolby Digital Plus/TrueHD ............................ (A page 78)

DTS ............................................................... (A page 78)

DTS-HD ........................................................ (A page 79)

AAC ............................................................... (A page 79)

DV IN AUDIO SETTING ................................... (A page 79)

BD MIX SOUND ............................................... (A page 79)

DISPLAY .............................................................. (A page 79)

ON SCREEN GUIDE ........................................ (A page 79)

BLUE BACK ..................................................... (A page 79)

SCREEN SAVER ............................................. (A page 79)

OSD LANGUAGE ............................................. (A page 79)

CONNECTION ..................................................... (A page 80)

MONITOR TYPE .............................................. (A page 80)

HDMI CONNECTION ....................................... (A page 80)

VIDEO PRIORITY MODE ............................. (A page 80)

HDMI OUTPUT RESOLUTION ..................... (A page 80)

BD-VIDEO 24p OUT ..................................... (A page 80)

x.v.Color ........................................................ (A page 81)

Deep Color .................................................... (A page 81)

HDMI RGB OUTPUT RANGE ....................... (A page 81)

HDMI --> DVI COLOR ................................... (A page 81)

HDMI AUDIO OUTPUT ................................. (A page 81)

HDMI-CEC ........................................................ (A page 81)

COMPONENT OUTPUT ................................... (A page 81)

VIDEO INPUT SETTING .................................. (A page 81)

Memo:

Changing Settings of this

Unit

Settings changed in the Settings Menu screen are stored on

this unit even when its power is turned off.

Displaying the Settings Menu

Press the [SET UP] button on the remote control

unit

The Settings Menu screen appears.

Memo:

When playback is in progress, pressing the button stops it

and displays the Settings Menu screen.

The cursor position appears at the position when the

screen was last closed.

Setting Menu List

The following items can be set. Items that cannot be set

cannot be selected.

SETUP ................................................................. (A page 75)

AUTO POWER (OFF) ....................................... (A page 75)

REMOTE CONTROL CODE ............................ (A page 75)

CLOCK SET/DISPLAY ..................................... (A page 75)

CLOCK SET .................................................. (A page 75)

DATE DISPLAY ............................................ (A page 75)

TIME DISPLAY CHOICE .............................. (A page 75)

PANEL DISPLAY BRIGHTNESS ..................... (A page 75)

DIMMER (POWER ON) ................................ (A page 75)

DIMMER (POWER OFF) .............................. (A page 76)

QUICK STARTUP ............................................ (A page 76)

BUZZER OUTPUT ........................................... (A page 76)

REMOTE CONTROL SENSOR TONE ......... (A page 76)

ALERT/WARNING TONE ............................. (A page 76)

DEFAULT SETTING ......................................... (A page 76)

PLAYBACK SETTING .......................................... (A page 76)

BD-/DVD-VIDEO PB SETTING ........................ (A page 76)

BD-VIDEO RATINGS .................................... (A page 76)

COUNTRY CODE ......................................... (A page 76)

AUDIO LANGUAGE ...................................... (A page 76)

SUBTITLE LANGUAGE ................................ (A page 76)

MENU LANGUAGE ...................................... (A page 76)

RESUME .......................................................... (A page 77)

STILL MODE .................................................... (A page 77)

SEAMLESS PLAYBACK .................................. (A page 77)

RECORD .............................................................. (A page 77)

XP MODE RECORDING AUDIO ...................... (A page 77)

HIGH-SPEED DUBBING .................................. (A page 77)

VIDEO MODE RECORDING ASPECT ......... (A page 77)

DISC RECORDING AUDIO .......................... (A page 78)

AUDIO .................................................................. (A page 78)

DYNAMIC RANGE CONTROL ......................... (A page 78)

The highlighted value is the default setting.

Settings Menu

CLOCK SET

Setup

Sets the current date and time.

Memo:

For details on the setting procedures, refer to “Setting the

5'672

date/time” (A page 20) .

#761ꢀ219'4ꢀꢁ1((ꢂ

1((

DATE DISPLAY

4'/16'ꢀ%10641.ꢀ%1&'

%.1%-ꢀ5'6ꢄ&+52.#;

2#0'.ꢀ&+52.#;ꢀ$4+)*60'55

37+%-ꢀ56#4672

4'/16'ꢀ%10641.ꢀꢃ

For setting the date (year, month, and day) display format.

Setting Values Description

1((

$7<<'4ꢀ176276

&'(#7.6ꢀ5'66+0)

YEAR.MONTH.DAY Displays the date in the year/month/

day order.

5QHVYCTGꢀ8GTUKQPꢀꢀꢀꢀꢀꢀꢀZZZZZꢅZZZZZꢅZZZZZ

MONTH.DAY.YEAR Displays the date in the month/day/

year order.

5'.'%6

':+6

5'672

4'6740

DAY.MONTH.YEAR Displays the date in the day/month/

year order.

AUTO POWER (OFF)

You can specify a time for the power of the unit to turn off

automatically when it is not being operated.

TIME DISPLAY CHOICE

For setting the time display format.

Setting Values

Description

Setting Values

Description

OFF

Power does not turn off automatically.

Turns off power after two hours.

Turns off power after six hours.

12H

24H

Displays the time in AM/PM format.

Displays the time in 24-hour format.

2 HOURS

6 HOURS

PANEL DISPLAY BRIGHTNESS

REMOTE CONTROL CODE

The brightness of the display window can be specified using

the “DIMMER (POWER ON)”, and “DIMMER (POWER OFF)”

control items.

For remote control units compliant with JVC’s products,

different remote control codes can be specified for those that

are used with this unit.

DIMMER (POWER ON)

For setting the brightness of the display window when the

power is turned "On".

Setting Values

Description

REMOTE CONTROL 1 Sets remote control code to 1.

REMOTE CONTROL 2 Sets remote control code to 2.

REMOTE CONTROL 3 Sets remote control code to 3.

REMOTE CONTROL 4 Sets remote control code to 4.

Setting Values Description

BRIGHT

DIMMED1

DIMMED2

DIMMED3

OFF

Bright

Slightly dim

Dim

CLOCK SET/DISPLAY

The current date/time and the display format on the screen

can be specified using the “CLOCK SET”, “DATE DISPLAY”,

and “TIME DISPLAY CHOICE” items.

Dimmer

Off

Settings Menu

DIMMER (POWER OFF)

Playback Setting

For turning on/off the light of the display window when the

power is turned "Off".

Setting Values

Description

2.#;$#%-ꢀ5'66+0)

$&ꢁꢂ&8&ꢁ8+&'1ꢀ2$ꢀ5'66+0)

OFF

Turns off the light.

Turns on the light.

4'57/'

#761

56+..ꢀ/1&'

5'#/.'55ꢀ2.#;$#%-

QUICK STARTUP

The quick startup setting can be specified as follows.

Setting

Values

Description

5'.'%6

':+6

5'672

OFF

Starts up in the normal way.

4'6740

Operation is speedily enabled after turning

on the power. (Quick start)

BD-/DVD-VIDEO PB SETTING

BD-Video and DVD-Video playback settings can be specified

using the “BD-VIDEO RATINGS”, “COUNTRY CODE”,

“AUDIO LANGUAGE”, “SUBTITLE LANGUAGE”, and “MENU

LANGUAGE” items.

Memo:

Setting to “ON” increases power consumption while the unit

is in the standby mode.

BD-VIDEO RATINGS

BUZZER OUTPUT

For setting the lower age limit for BD-Video ratings.

The buzzer setting can be specified as follows.

Setting Values

Description

REMOTE CONTROL SENSOR TONE

NO LIMIT

All BD-Videos can be viewed.

For setting whether to sound the buzzer when the remote

control sensor receives signals.

254YEAR(S)-

0YEAR(S)

BD-Videos that are subject to the age

limit cannot be viewed.

Setting

Values

Description

Memo:

OFF

Buzzer does not sound when the remote

control sensor receives signals.

In order to set the restrictions, password (four-digit

number) registration is required.

The password status becomes unregistered if the

restriction setting is disabled. A new password can be

registered after setting the age limit again.

Sounds the buzzer when the remote control

sensor receives signals.

ALERT/WARNING TONE

It is recommended that you note down the password in

case it is lost or forgotten.

For setting whether to sound the buzzer when an operation is

completed or when a warning message appears.

COUNTRY CODE

Setting Values

Description

For setting the country code.

OFF

Buzzer does not sound.

Sounds the buzzer.

For details on the country codes, refer to the “Country Code

List” (A page 96) .

Memo:

If the “BD-VIDEO RATINGS” setting is specified, you will

DEFAULT SETTING

be required to enter the password registered for the “BD-

VIDEO RATINGS” in order to change the “COUNTRY

CODE”.

Restores the setting values on the setting screen to their

factory default values.

Setting

Values

Description

AUDIO LANGUAGE

For setting the audio sound when playing back BD-Videos

or DVD-Videos.

YES

Restores the factory default values.

For details on the language codes, refer to the “Language

Code List” (A page 94) .

Returns to the initial screen without

resetting the values.

SUBTITLE LANGUAGE

Memo:

For setting the subtitle language when playing back BD-

Videos or DVD-Videos.

For details on the language codes, refer to the “Language

Code List” (A page 94) .

“BD-VIDEO RATINGS” and “COUNTRY CODE” settings

cannot be reset once they have been specified.

MENU LANGUAGE

For setting the menu language when playing back BD-

Videos or DVD-Videos.

For details on the language codes, refer to the “Language

Code List” (A page 94) .

Settings Menu

Record

RESUME

The stop position can be stored when playback of a BD-

Video, DVD-Video, BDMV, AVCHD, finalized discs, or SD

card is stopped halfway.

4'%14&

Setting Values

Description

&QND[ꢀ&KIKVCN

:2ꢀ/1&'ꢀ4'%14&+0)ꢀ#7&+1

*+)*ꢁ52''&ꢀ&7$$+0)

OFF

Resume information is not stored.

Stores resume information.

Memo:

Resume information is stored at all times for other discs as

well as the HDD regardless of this setting.

When a HDD title is selected using Playback Navigation, it

is played back from the beginning.

5'.'%6

':+6

4'6740

5'672

Some discs do not allow playback from the resume point.

XP MODE RECORDING AUDIO

STILL MODE

For changing the settings of audio mode during recording in

the XP mode.

For setting the method for displaying paused images during

playback of the HDD or a disc.

Setting Values

Dolby Digital

LPCM

Description

Setting

Values

Description

Records in “Dolby Digital”.

Records in “LPCM”.

AUTO

Automatic control.

FIELD

Use this setting for moving images or when

there is blurring in the “AUTO” mode.

HIGH-SPEED DUBBING

Items under “VIDEO MODE RECORDING ASPECT” and

“DISC RECORDING AUDIO” can be set to support high-

speed dubbing.

FRAME

Use this setting when detailed patterns or

designs are not clear in the “AUTO” mode.

VIDEO MODE RECORDING ASPECT

Memo:

For setting the aspect ratio during recording.

This setting is disabled for programs in the DR mode and

during playback of AVCHD videos.

Setting

Values

Description

SEAMLESS PLAYBACK

AUTO

Performs recording in the aspect ratio

setting when recording starts.

For setting the method for playing back partially erased

scenes.

4:3

Records at the fixed aspect ratio of 4:3.

Records at the fixed aspect ratio of 16:9.

Setting Values

Description

16:9

OFF

Plays back with high accuracy.

Plays back smoothly.

Memo:

High-speed dubbing to a DVD-Video disc cannot be

performed when there are different aspect ratios in a title.

In this case, fix the aspect ratio to 4:3 or 16:9. This setting

remains valid during re-encode dubbing.

Memo:

SD picture quality is retained during re-encode dubbing.

For joints of scenes that are 15 seconds or shorter,

seamless playback may fail even when it is set to “ON”.

The same applies during re-encode dubbing in the SD

picture quality.

For details on high-speed dubbing and re-encode dubbing,

refer to the “Dubbing chart” (A page 24) .

Settings Menu

DISC RECORDING AUDIO

DIGITAL OUT

For changing the settings of audio to be recorded to the disc

when in the AF, AN, AE or AL mode.

Set this item according to the device connected to the digital

audio output terminal (optical digital).

Setting

Values

Description

PCM DOWN SAMPLING

For specifying settings on sampling frequency conversion.

AUTO

Records “Stereo”, “Surround” or “Dual

broadcast” audio sounds as they are.

Setting

Values

Description

FIXED

Records “Stereo” and “Surround” sounds in

“Stereo”. “Dual broadcast” audio sounds are

recorded as they are.

OFF

Sampling frequency is not converted.

Audio recorded at a sampling frequency of

96 kHz or 88.2 kHz is converted to 48 kHz

and 44.1 kHz respectively.

Memo:

Surround sounds of a title become stereo sounds when re-

encode dubbing is performed.

Memo:

Setting to “OFF” may produce the same effects as the “ON”

mode for some discs.

Audio

Dolby Digital

For setting audio output to “BITSTREAM” or “PCM”.

Setting Values

Description

#7&+1

BITSTREAM

Use this setting when connecting a

device that is able to decode “Dolby

Digital”.

&;0#/+%ꢀ4#0)'ꢀ%10641.

&190ꢀ/+:

56'4'1

&+)+6#.ꢀ176

&8ꢀ+0ꢀ#7&+1ꢀ5'66+0)

$&ꢀ/+:ꢀ5170&

56'4'1ꢀꢁ

PCM

Audio input will be changed and output as

“PCM”.

Use this setting when connecting a

device that is unable to decode “Dolby

Digital”.

5'.'%6

':+6

5'672

4'6740

Dolby Digital Plus/TrueHD

For setting audio output to “BITSTREAM” or “PCM”.

DYNAMIC RANGE CONTROL

For setting the dynamic range compression ratio (ratio

between the maximum and minimum volume) during Dolby

Digital playback.

Setting

Values

Description

BITSTREAM

Use this setting when connecting a

device that is able to decode “Dolby

Digital Plus/TrueHD”.

Setting Values

Description

AUTO

Perform compression only for Dolby

TrueHD.

PCM

Audio input will be changed and output as

“PCM”.

Use this setting when connecting a

device that is unable to decode “Dolby

Digital Plus/TrueHD”.

OFF

Not compressed.

Perform maximum compression.

Memo:

DTS

Setting to “OFF” may produce the same effects as the “ON”

mode for some discs.

For setting audio output to “BITSTREAM” or “PCM”.

Setting Values

Description

Performing compression allows even the slightest sound to

be heard clearly.

BITSTREAM

Use this setting when connecting a

device that is able to decode “DTS”.

There may be differences in the effect depending on the

disc used.

PCM

Audio input will be changed and output as

“PCM”.

Use this setting when connecting a

device that is unable to decode “DTS”.

DOWN MIX

For setting whether to output analog audio.

Setting Values

Description

STEREO

Use this setting when connecting an

audio amplifier or TV.

DOLBY

SURROUND

Use this setting when connecting an

amplifier that supports Dolby

Surround.

Settings Menu

DTS-HD

For setting audio output to “BITSTREAM” or “PCM”.

Display

Setting Values

Description

&+52.#;

BITSTREAM

Use this setting when connecting a

device that is able to decode “DTS-HD”.

10ꢀ5%4''0ꢀ)7+&'

$.7'ꢀ$#%-

#761

5%4''0ꢀ5#8'4

15&ꢀ.#0)7#)'

PCM

Audio input will be changed and output as

“PCM”.

'0).+5*

Use this setting when connecting a device

that is unable to decode “DTS-HD”.

AAC

5'.'%6

4'6740

':+6

For setting audio output to “BITSTREAM” or “PCM”.

5'672

Setting Values

Description

ON SCREEN GUIDE

For displaying operation details.

Setting Values

BITSTREAM

Use this setting when connecting a

device that is able to decode “AAC”.

Description

PCM

Audio input will be changed and output as

“PCM”.

Use this setting when connecting a

device that is unable to decode “AAC”.

AUTO

Appears for five seconds when an

operation is performed.

OFF

Not displayed.

Memo:

Audio sound may not be properly played back if the audio

equipment in use does not support “BITSTREAM” output.

In this case, set to “PCM”.

BLUE BACK

For setting the screen display when there is no signal input.

Setting Values

Description

DV IN AUDIO SETTING

OFF

Displays screen as it is.

For changing the audio recording settings during DV input.

Switches display to a blue screen.

Setting Values

Description

STEREO 1

Records the audio sound during video

recording (L1, R1).

SCREEN SAVER

For setting whether to use a screensaver.

Setting

Values

Description

STEREO 2

MIX

Records audio sound that is added later

(L2, R2), such as during editing.

OFF

Screen saver is not used.

Records “STEREO 1” and “STEREO 2”

sounds.

Screen saver is used. Switches to the burn-

in prevention screen when the unit is not

operated for more than five minutes.

BD MIX SOUND

For setting a mixture of BD video secondary audio and

operation sounds output.

OSD LANGUAGE

For setting the language for messages displayed on-screen.

Setting

Values

Description

OFF

Outputs main audio only.

Outputs a mixture of BD video secondary

audio and operation sounds during playback

of BD-Videos that contain BD video

secondary audio and menu operation

sounds.

Memo:

Output is converted to Dolby Digital or DTS according to

the main audio when the “DIGITAL OUT” item is set to

“BITSTREAM”.

Settings Menu

Connection

HDMI OUTPUT RESOLUTION

Setting

Values

Description

AUTO

Automatically selects an appropriate

resolution according to the connected

device.

%100'%6+10

/10+614ꢀ6;2'

*&/+ꢀ%100'%6+10

*&/+ꢄ%'%

1((

%1/210'06ꢀ176276

8+&'1ꢀ+0276ꢀ5'66+0)

ꢁꢂꢃꢂK

8+&'1

480p

1080i

720p

1080p

Fixes the resolution at 480p.

Fixes the resolution at 1080i.

Fixes the resolution at 720p.

Fixes the resolution at 1080p.

5'.'%6

':+6

5'672

4'6740

Memo:

When the resolution is set to “720p”, videos are output at

“1080i” other than those recorded at “720p” even though

“720p” is shown on the display.

MONITOR TYPE

For setting the aspect ratio according to the connected

monitor.

Depending on the conditions (monitor type 16:9,resolution

“720p” and above, aspect 4:3), some of the OSD display of

the component output may be cut off. In this case, set

“VIDEO PRIORITY MODE” to “COMPONENT”.

OSD of the [VIDEO OUT]/[S-VIDEO OUT] terminals may

be cut off with the above conditions even when

“COMPONENT” is selected. In this case, set the

component resolution to “480p” or below, or set the monitor

type to other settings except 16:9.

Setting Values

Description

16:9

Set to this value when connected to

monitors with 16:9 aspect ratio.

16:9FULL

Choose this setting when a 16:9 monitor

is connected to display images without

the black borders.

4:3 PAN&SCAN Set to this value when connecting to

monitors with an aspect ratio of 4:3.

Plays back videos with the left and right

edges trimmed off.

BD-VIDEO 24p OUT

Setting

Values

Description

OFF

Outputs in the resolution set by “HDMI

OUTPUT RESOLUTION”.

4:3

Set to this value when connecting to

monitors with an aspect ratio of 4:3.

Plays back videos with a black band at

the upper and lower ends.

LETTERBOX

Outputs 24p elements at 24p.

Memo:

24p playback is possible for commercially available BD-

Videos or BDMVs that are recorded in 24p. Content other

than BDMVs that is dubbed or recorded on this unit at 24p,

as well as 24p content on SD cards are played back at 60p

or 60i.

HDMI CONNECTION

VIDEO PRIORITY MODE

Setting Values

Description

COMPONENT Set to this value for output at a resolution

of “480p” or higher from the

This is applicable for BD-ROM and DVD-Video titles.

This is available when connected to a 24p compatible

monitor.

[COMPONENT VIDEO OUT] terminal.

HDMI

Set to this value when priority is to be

given to the “HDMI OUTPUT

RESOLUTION” setting.

Elements other than 24p ones are output at 60p.

No video images will be output from the video, S-video and

component outputs when the HDMI output resolution is at

1080/24p.

Memo:

During data output from the [HDMI] terminal, setting to

“COMPONENT” automatically outputs data in the

“COMPONENT OUTPUT” setting. Setting to “HDMI”

outputs data in the “HDMI OUTPUT RESOLUTION” setting.

During data output from the [HDMI] and [COMPONENT

VIDEO OUT] terminals, setting to “COMPONENT”

automatically outputs data in the “COMPONENT OUTPUT”

setting. Setting to “HDMI” outputs data at the “480i”

resolution from the [COMPONENT VIDEO OUT] terminal.

When there is no output from the [HDMI] terminal, data is

automatically output in the “COMPONENT OUTPUT”

setting from the [COMPONENT VIDEO OUT] terminal.

Settings Menu

x.v.Color

HDMI-CEC

Setting

Values

Description

For setting the HDMI-CEC operation from the connected

device.

Setting Values

Description

AUTO

Outputs x.v.Color information with HDMI

when video images that include x.v.Color

information are played back.

OFF

Disables HDMI-CEC.

Enables HDMI-CEC.

OFF

This is applicable when an x.v.Color

compatible monitor is connected.

COMPONENT OUTPUT

Memo:

For setting the resolution of video output from the

[COMPONENT VIDEO OUT] terminals.

This is applicable when an x.v.Color compatible monitor is

connected.

Setting Values

Description

Deep Color

480i

Sets output to “480i”.

Sets output to “480p”.

Sets output to “720p”.

Sets output to “1080i”.

Setting

Values

Description

480p

720p

AUTO

Set to this value when a “Deep Color” device

is connected.

1080i

OFF

Set to this value when the video image is

distorted, or colors are unnatural.

Memo:

When the resolution is set to “720p”, videos are output at

“1080i” other than those recorded at “720p” even though

“720p” is shown on the display.

HDMI RGB OUTPUT RANGE

Setting Values

STANDARD

ENHANCED

Description

This unit does not support component output at “1080p”. To

output at “1080p”, do so via HDMI connection.

Set to this value for standard uses.

If “VIDEO PRIORITY MODE” is set to “HDMI”, the unit will

output at “480i” regardless of the current setting.

Set to this value when the black and

white parts of the video image are not

distinct.

If “VIDEO PRIORITY MODE” is set to “COMPONENT”, or

when a HDMI connection is used, DVD videos will be

output at “480p” even if “720p” or “1080i” has been set.

Memo:

This is available when connected to a DVI device that only

supports RGB input.

The aspect ratio of video/S-video output changes according

to the component output setting. As such, there may be

cases where the aspect ratio of the video/S-video output is

different from the predefined setting of the content.

HDMI --> DVI COLOR

Setting

Values

Description

VIDEO INPUT SETTING

Choose a setting according to the video terminal to be

connected when an external analog input terminal is used.

AUTO

Value is set automatically according to the

monitor.

Setting

Values

Description

RGB FIX

Use this setting when video images are not

correctly displayed on the monitor.

VIDEO

Use this setting when connecting via the

video (BNC) terminal.

Memo:

This is available when the “x.v.Color” setting is set to “OFF”.

When the “x.v.Color” setting is set to “AUTO”, this setting will

be set to “AUTO” automatically.

S-VIDEO

Use this setting when connecting via the

S-video (black) terminal.

Change this setting when no video image appears while

connected to a DVI device.

HDMI AUDIO OUTPUT

Setting

Values

Description

OFF

Use this setting if you do not want to send

audio output from the HDMI cable.

Use this setting to send audio output from

the HDMI cable.

Others

Locking the Disc Tray

Turning on the Mode Lock

By turning on the lock for the disc tray, the tray cannot be

Turning on the mode lock disables all operations using the

buttons on the unit and remote control, except for “Play” and

“Record”.

opened or closed using the [M] button.

Memo:

When the [M] button is pressed while the disc tray lock is

Memo:

turned on, a “LOCKED” message will appear on the display

window of the unit for about three seconds.

When a button that is disabled is pressed, a “LOCKED”

message will appear on the display window of the unit for

three seconds.

Locking the disc tray

Turning on the mode lock

Press the [A] button on the unit to turn “Off”

the power

Press the [Z] button on the remote control for

five seconds or longer when in the “Normal

Recording”, “Stop”, or “Normal Playback” mode

Press and hold the [o] button on this unit, then

press the [M] button

A “LOCKED” message appears on the display window of

the unit, indicating that the mode lock is turned on.

A “LOCKED” message appears on the display window of

the unit, indicating that the disc tray is locked.

Press the " " button for

five seconds or longer

Unlocking the disc tray

Press the [A] button on the unit to turn “Off”

the power

Press and hold the [o] button on this unit, then

press the [M] button

An “UNLOCK” message appears on the display window of

the unit, indicating that the disc tray is unlocked.

Turning off the mode lock

Press the [Z] button on the remote control for

five seconds or longer when the mode lock is

turned on

An “UNLOCK” message appears on the display window of

the unit, indicating that the mode lock is turned off.

Last Function Memory

When the power plug is disconnected from unit or when

power failure occurs, your settings for the following functions

are kept in the memory. These settings will resume when the

unit is turned on again.

Various setting menus (A Page 74 - 81)

Deck selection: HDD/BD/SD

Recording mode: XP, etc. (A page 28)

Input selection: L-1/DV (A page 47)

Repeat playback of the disc playback settings menu (A

page 56)

Kept for DVD-Video/AVCHD/BDMV and title/chapter only.

Others

RS-232C Interface (only for

SR-HD1500)

Command Table

only for SR-HD1500

Lower Order

Higher Order

Complete

Error

Cassette

Out

Not

Target

ACK

NAK

Play

Stop

Still

Clear

Sense

Chapter

Title

Sense

Chapter

Title

Date

Preset

Clock

Preset

Finalize

Cancel-

Disc

Erase

TOP

NEXT PREV

CHAPTER CHAPTER

Setup

SET

DOWN

RIGHT

LEFT

REW

Title

Remote

Data

Finalization

Standby

Off

Eject

Fwd

Field

Step

Rev

Field

Step

Fwd Shtl

Rev Shtl

Select

Preset

Select

Sense

Date

Data

Sense

Clock

Data

Sense

Rec

Status

Sense

Tc Data

Sense

CTL

Data

Sense

JVC

Status

Sense

Command

Target

Rec/Dub

Request

Mode

: Non-synchronous

Specifications

Pin layout

Character length : 8 bits

Parity check

Start bit

: Odd

: 1

Stop bit

: 1

Data rate

: 9600 bps

Bit configuration

PIN No. Signal

Operation

Transmit data

Direction of signal

This unit h PC

Parity check

TxD

RxD Receive data

This unit i PC

D0 D1 D2 D3 D4 D5 D6 D7

GND Signal grounding

Starting bit

Stopping bit

Memo:

When using the Serial Command Connector, the cable to be used should be a RS-232C interface cable (straight type, 3 m or

shorter).

When using RS-232C, set “QUICK STARTUP” in the settings menu to “ON”.

During command transmission, a minimum interval of About 50 milliseconds is required between each command.

During command transmission, do not send the next command until the ACK (refer to “System Commands” (A page 90) ) or

response (refer to “Response Commands” (A page 90) ) for each command is received.

The recommended maximum waiting time for the ACK or response for each command is as follows.

ACK

: About 50 milliseconds

: About 5 seconds

Response

Others

Command

Operation Commands

Commands for operating functions such as PLAY and REC on the BLU-RAY DISC & HDD RECORDER

Command

Description

Power Off

Plays the selected deck.

Eject: Opens/Closes tray. (BD Deck only)

Stops the selected deck. Resume will be

cleared when this is pressed while in the Stop

mode. Rec Request will be cleared.

FF: Functions only during playback. Activates

forward search.

REW: Functions only during playback.

Activates reverse search.

Switches the selected deck to the Still mode.

Clear: Clears the Error status.

Functions as a key for advancing (FWD) a

frame. When this command is received during

still mode, the unit advances the still picture

by one frame (or field) in the FWD direction.

Searches the specified chapter and starts

playback from the beginning.

Searches the specified title under “ORIGINAL”

or in the “PLAY LIST” by its number and starts

playback from the beginning.

Functions as a key for reversing (REV) a

frame. When this command is received during

still mode, the unit reverses the still picture by

one frame (or field) in the REV direction.

For setting the date.

Fwd Shtl: Functions only during playback.

Activates forward search.

B5 h 30: STILL

B5 h 31: FWD SLOW at a slow speed.

B5 h 33: FWD SLOW at a fast speed.

B5 h 35: 1x

B5 h 36: FWD SEARCH at a fast speed.

B5 h 37: FWD SEARCH at a faster speed.

B5 h 38: FWD SEARCH at the fastest speed.

For setting the time.

Finalizes the disc. (BD Deck)

Cancels disc finalization. (BD Deck)

For erasing rewritable discs.

Displays/Closes the top menu of a disc. (BD

Deck)

Displays/Closes the disc menu. (BD Deck)

Rev Shtl: Functions only during playback.

Activates reverse search.

B6 h 30: STILL

B6 h 31: REV SLOW at a slow speed.

B6 h 33: REV SLOW at a fast speed.

B6 h 36: REV SEARCH at a fast speed.

B6 h 37: REV SEARCH at a faster speed.

B6 h 38: REV SEARCH at the fastest speed.

Advances to the next chapter. Functions like

the T button on the remote control.

Returns to the previous chapter. Functions

like the S button on the remote control.

Displays/Closes the Main Menu, Editing,

Library Database Navigation or Dubbing

screen.

For setting the input/output, recording mode,

audio language selection and subtitle

selection.

97 h 30: Closes the screen.

97 h 31: Displays the Main Menu screen.

97 h 32: Displays the Library Database

Navigation screen.

97 h 35: Displays the Editing screen.

97 h 37: Displays the Dubbing screen.

Rec: Starts recording at the selected deck

when a Rec Request is received.

Command Target:

F0 h 34: For selecting HDD deck.

F0 h 38: For selecting BD deck.

F0 h 3C: For selecting SD deck.

Functions as a confirmation key.

Functions as an up key.

Functions as a down key.

Functions as a right key.

Functions as a left key.

Rec Request: For issuing approval for

recording. This can be cleared using STOP.

Advances to the next title. Functions like the

T button on the remote control.

Returns to the previous title. Functions like the

S button on the remote control.

Issues the same codes as the wired remote

control via RS-232C.

Power On

Others

80-8F

80 : Chapter Search

1st Byte 2nd Byte 3rd Byte

Chapter Search

Hundreds Tens

Ones

ASCII codes (30 - 39) 3*

E.g. (012) 30

E.g. : When searching the 12th chapter.

81 : Title Search under “ORIGINAL”

1st Byte 2nd Byte 3rd Byte 4th Byte

Title Search (ORIGINAL) 30

Hundreds Tens

Ones

ASCII codes (30 - 39)

E.g. (345)

E.g. : When searching the 345th title, as indicated by the title number on the top right corner of the index, under “ORIGINAL”.

81 : Title Search in “PLAY LIST”

1st Byte 2nd Byte 3rd Byte 4th Byte

Title Search (PLAY LIST) 38

Hundreds Tens

Ones

ASCII codes (30 - 39)

E.g. (028)

E.g. : When searching the 28th play list, as indicated by the play list number on the top right corner of the index, in the “PLAY

LIST”.

8E : Date Preset

1st Byte

2nd Byte

3rd Byte

4th Byte

5th Byte 6th Byte

Date Preset

ASCII code (30 - 39) 3*

E.g. (09.14.2009) 30

Mth (Tens) Mth (Ones) Day (Tens) Day (Ones) Yr (Tens) Yr (Ones)

E.g. : When setting the date to September 14 2009.

8F : Clock Preset

1st Byte 2nd Byte 3rd Byte

4th Byte

5th Byte

6th Byte

Clock Preset

ASCII code (30 - 39) 3*

E.g. (12:34:56) 31

Hr (Tens) Hr (Ones) Min (Tens) Min (Ones) Sec (Tens) Sec (Ones)

E.g. : When setting the time to 12 hrs 34 min and 56 sec.

Others

9F : Remote Data

The remote control codes for controlling the wired remote controller via RS-232C is as shown in the following table. The codes

apply to all three HDD, BD and SD deck unless otherwise stated.

Code

Items

INPUT SELECT

STOP

Remarks

BD/DVD Deck only

CUSOR 90°

Moves the arrow in the

index list to the up. (J)

CUSOR 180°

Moves the arrow in the

index list to the left. (H)

F.F/SPEED+

REW/SPEED-

POWER ON/OFF

PLAY

CUSOR 270°

Moves the arrow in the

index list to the down. (K)

OPEN/CLOSE

PROGRESSIVE

TOP MENU

MARK

BD/DVD Deck only

HDD/BD Deck only

DVD Deck only

PAUSE/STILL

FWD SKIP

REV SKIP

HDD/DVD Deck only

CM SKIP

AUDIO

REV FRAME

-SLOW D

Power Off

Power On

Use with “QUICK

STARTUP” set to “ON”.

Refer to “QUICK

SHUTTLE-C

SHUTTLE-B

SHUTTLE-A

SHUTTLE-2

SHUTTLE-1

-SLOW B

STARTUP” (A page 76) .

TEN KEY 1

TEN KEY 2

TEN KEY 3

TEN KEY 4

TEN KEY 5

TEN KEY 6

TEN KEY 7

TEN KEY 8

TEN KEY 9

KEY Z

-SLOW C

+SLOW C

+SLOW B

SHUTTLE +1

SHUTTLE +2

SHUTTLE +A

SHUTTLE +B

SHUTTLE +C

+SLOW D

TEN KEY 0

KEY #

REC MODE (XP/SP/LP/

EP…)

ANGLE/LIVE CHECK

ANGLE (BD/DVD Deck

only)

LIVE CHECK (HDD/BD

Deck only)

BD/DVD DECK

DUBBING

SET UP

SUBTITLE DVD Deck

only

OK/ENTER

CC REC

ON SCREEN

HDD DECK

RETURN

COLOR KEY BLUE

COLOR KEY RED

JOG-1/6

MEDIA MANAGEMENT

CUSOR 0°

Moves the arrow in the

index list to the right. (I)

Others

JOG +1/6

JOG +1

L1 COMPOSITE INPUT

SELECT

HDD Deck only

PLAYBACK SETTING

DELETE

DC INSTANT REPLAY

DD EDIT

INFORMATION

CORRECT

COLOR KEY GREEN

COLOR KEY YELLOW

NAVIGATION

FWD FRAME

MODE LOCK

L1 Y/C INPUT SELECT

HDD Deck only

B8 : Input/Output Selection

1st Byte 2nd Byte

External input selection L-1 VIDEO

External input selection L-1 S-VIDEO 30

External input selection DV

B8 : Recording Mode Selection

1st Byte 2nd Byte

XP 34

SP 34

LP 34

EP 34

DR 34

AF 34

AN 34

AL 34

AE 34

Others

Subtitle Selection

B8 : Subtitle Selection

1st

2nd

1st

2nd

1st

2nd

1st

2nd

Byte

OFF

JAPANESE

ENGLISH

GERMAN

FRENCH

ITALIAN

SPANISH

DUTCH

SWEDISH

NORWEGIAN

FINNISH

DANISH

“Language Code List” (A page 94)

Others

Audio Language Selection

B8 : Audio Language Selection

1st

2nd

1st

2nd

1st

2nd

1st

2nd

Byte

JAPANESE

ENGLISH

GERMAN

FRENCH

ITALIAN

SPANISH

DUTCH

SWEDISH

NORWEGIAN

FINNISH

DANISH

“Language Code List” (A page 94)

Others

Response Commands

Commands relating to RS-232C control system.

Command

Description

Complete: Issued by the external recorder upon completing all specified operations by commands.

Error: Issued by the external recorder when receiving invalid commands in the context. In such cases,

commands that are sent will not be accepted. However, a return command will be issued but only to the Status

Sense. To clear the Error status, perform command 56 (Clear).

Not Target: Issued by the external recorder when specified operations by commands cannot be completed

properly.

ACK: A return command issued when a defined command is received.

NAK: A return command issued when an undefined or possibly nonexistent command is received.

Cassette Out: Issued upon completing the operation of opening and closing the tray when the HDD/DVD deck

is selected.

System Commands

Commands for acquiring information such as deck status.

Command

Description

Chapter Sense: For acquiring the current chapter number. (*)

Title/Track Sense: For acquiring the current title number under “ORIGINAL” or in the “PLAY LIST”. (*)

Select Sense: For acquiring the status of the inputs, outputs, recording mode, audio language selection and

subtitle selection. (*)

Date Sense: For acquiring the currently configured year, month and day. (*)

Time Sense: For acquiring the currently configured hour, minute and second. (*)

Status Sense: For acquiring the deck information. (*)

TC Data Sense: For acquiring the total remaining time in the current recording mode when there is a media in

the selected deck. (*)

CTL Data Sense: For acquiring the lapse counter when there is a media in the selected deck. (*)

JVC Status Sense: Returns data from the unit. (*)

VTR Ind: A command for checking whether the connected device is the external recorder.

(*) : See A pages 90-93 for data format.

Sense

Chapter Sense

1st Byte 2nd Byte 3rd Byte

Chapter Sense Hundreds Tens

Ones

E.g. (012)

E.g. : When the current chapter is the 12th chapter.

Others

Title/Track Sense under “ORIGINAL”

1st Byte 2nd Byte 3rd Byte 4th Byte

Title/Track Sense (ORIGINAL) 30

Hundreds Tens

Ones

E.g. (345)

E.g. : When the current title under “ORIGINAL” is the 345th title.

Title/Track Sense in “PLAY LIST”

1st Byte 2nd Byte 3rd Byte 4th Byte

Title/Track Sense (PLAY LIST) 38

Hundreds Tens

Ones

E.g. (028)

E.g. : When the current title under “PLAY LIST” is the 28th title.

Select Sense

1st Byte

2nd Byte

3rd Byte

4th Byte

5th Byte

Select Sense

External input

selection

Output selection Recording mode

selection

Audio language

selection

Subtitle selection

E.g. (3930311213) 39

E.g. : When the selection status of the video deck is as follows:

External input selection h L-1 S-VIDEO

Output selection h Common output (Frame is fixed at 0.)

Recording mode selection h SP

Audio language selection h ENGLISH

Subtitle selection h GERMAN

For response data for B9, see data format for “B8 (Select Preset)” (A page 87-89).

When the current status cannot be acquired, the value is fixed as “-” (0x2D).

Date Data Sense

For acquiring the currently configured year, month and day in ASCII codes.

1st Byte

2nd Byte

3rd Byte

4th Byte

5th Byte 6th Byte

Date Sense

Mth (Tens) Mth (Ones) Day (Tens) Day (Ones) Yr (Tens) Yr (Ones)

E.g. (09.14.2009) 30

When the current date is not set, the value is fixed as “-” (0x2D).

Time Data Sense

For acquiring the currently configured hour, minute and second in ASCII codes.

1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte

6th Byte

Time Sense

Hr (Tens) Hr (Ones) Min (Tens) Min (Ones) Sec (Tens) Sec (Ones)

E.g. (12:34:56) 31

When the current time is not set, the value is fixed as “-” (0x2D).

Others

Status Data Sense

For acquiring the remaining time in the current recording mode in hours, minutes and seconds for HDD/DVD.

1byte

2byte

3byte

4byte

5byte

STATUS

SENSE

HDD

HDD/BD/SD

Video EE

HDD/BD/SD HDD/BD/SD HDD/BD/SD

bit7

1 (Fixed)

0 (Fixed)

During PLAY During PAUSE (Set

to 1 simultaneously

with “During PLAY”

in STILL mode.)

bit6

bit5

0 (Fixed)

1 (Fixed)

0 (Fixed)

1 (Fixed)

Audio EE

0 (Fixed)

During Reverse

Shuttle Search

(Excluding STILL)

bit4

bit3

Record

Forbidden

Record

Forbidden

1 (Fixed)

0 (Fixed)

During

STOP

During Forward

Shuttle Search

(Excluding STILL)

Disc Not

Inserted

Disc Not

Inserted

Disc Not

Inserted

Occurrence of 0 (Fixed)

abnormality in

VTR

During

Refer to the

SEARCH SPEED

table.

STANDBY

(Unit Power

Off)

bit2

0 (Fixed)

During

Repeat

Playback

(Including

PAUSE)

0 (Fixed)

Refer to the

SEARCH SPEED

table.

bit1

bit0

0 (Fixed)

During REC

0 (Fixed)

Refer to the

SEARCH SPEED

table.

RS-232C

command

RS-232C

command

RS-232C

command

0 (Fixed)

Refer to the

SEARCH SPEED

table.

error status. error status. error status.

Clear using

56 (Clear).

Clear using

56 (Clear).

Clear using

56 (Clear).

TC Data Sense

1st Byte 2nd Byte 3rd Byte

4th Byte

5th Byte

6th Byte

7th Byte

8th Byte

TC Data Sense Hr (Tens) Hr (Ones) Min (Tens) Min (Ones) Sec (Tens) Sec (Ones) Frame (Tens) Frame (Ones)

E.g. (01:23:45) 30

E.g. : When remaining time is 1 hr 23 min 45 sec.

Frame is fixed as 0.

Others

SEARCH SPEED

bit3

bit2

bit1

bit0

STILL

SEARCH1

SEARCH2

SEARCH3

SEARCH4

SEARCH5

CTL Data Sense

For acquiring lapse counter of selected deck in hours, minutes and seconds.

1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte

CTL Data Sense Hr (Tens) Hr (Ones) Min (Tens) Min (Ones) Sec (Tens) Sec (Ones) Frame (Tens) Frame (Ones)

6th Byte

7th Byte

8th Byte

E.g. (01:23:45)

E.g. : When time lapse counter is 1 hr 23 min 45 sec.

Frame is fixed as 0.

JVC Status Sense

1byte

2byte

3byte

4byte

HDD/BD/SD HDD/BD/SD

HDD/BD/SD

1 (Fixed)

0 (Fixed)

HDD/BD/SD

1 (Fixed)

0 (Fixed)

bit7 1 (Fixed)

0 (Fixed)

1 (Fixed)

0 (Fixed)

bit6 0 (Fixed)

bit5 0 (Fixed)

bit4 0 (Fixed)

bit3 0 (Fixed)

Refer to the DISC TYPE table below. 0 (Fixed)

During dubbing (Including

PAUSE)

bit2 0 (Fixed)

bit1 0 (Fixed)

bit0 1 (Fixed)

Refer to the DISC TYPE table below. 0 (Fixed)

0 (Fixed)

Refer to the DISC TYPE table below. During dubbing (Including

PAUSE)

DISC TYPE

bit3 bit2 bit1 bit0

DVD

DVD-RAM

DVD-R

BD-ROM

BD-R

DVD-RW

DVD+R

DVD+RW

BD-RE

No disc

Unknown

When SD deck is selected, the values are fixed as bit3:0, bit2:0, bit1:1 and bit0:0.

Others

Language Code List

Code

Language

Code

Language

Code

Language

Afar

Hindi

Ossetian

Panjabi

Persian

Pali

Abkhazian

Afrikaans

Akan

Hiri Motu

Hungarian

Igbo

Albanian

Amharic

Arabic

Icelandic

Ido

Polish

Portuguese

Pashto

Sichuan Yi

Inuktitut

Interlingue

Aragonese

Armenian

Assamese

Quechua

Rhaeto-Romance

Romanian

Interlingua (International

Auxiliary language Association)

Avar

Indonesian

Inupiak

Kirundi

Avestan

Aymara

Russian

Sango

Italian

Azerbaijani

Bashkir

Javanese

Japanese

Kalaallisut

Kannada

Kashmiri

Kanuri

Sanskrit

Serbia

Bambara

Basque

Croatian

Sinhala

Slovak

Belarusian

Bengali

Slovenian

Northern Sami

Samoan

Shona

Bihari

Kazakh

Bislama

Bosnian

Breton

Khmer

Kikuyu

Kinyarwanda

Kirghiz

Sindhi

Bulgarian

Burmese

Catalan, Valencian

Chamorro

Chechen

Chinese

Church Slavic

Chuvash

Cornish

Somali

Komi

Southern Sotho

Spanish

Sardinian

Swati

Kongo

Korean

Kwanyama

Kurukh

Sundanese

Swahili

Lao

Latin

Swedish

Tahitian

Tamil

Latvian

Corsican

Cree

Limburgish

Lingala

Tatar

Czech

Lithuanian

Luxembourgish

Telugu

Danish

Tajik

Others

Divehi

Luba-Katanga

Ganda

Tagalog

Thai

Dutch

Dzongkha

English

Esperanto

Estonian

Ewe

Macedonian

Marshallese

Malayalam

Māori

Tibetan

Tigrinya

Tongan

Tswana

Tsonga

Turkmen

Turkish

Twi

Marathi

Faroese

Fijian

Malay

Malagasy

Maltese

Finnish

French

Moldavian

Mongolian

Nauruan

Uighur

Ukrainian

Urdu

Western Frisian

Fulah

Georgian

German

Scottish Gaelic

Irish

Navajo

Uzbek

South Ndebele

North Ndebele

Ndonga

Venda

Vietnamese

Volapük

Welsh

Galician

Manx

Nepali

Norwegian Nynorsk

Norwegian Bokmål

Norwegian

Chichewa

Occitan

Walloon

Wolof

Greek

Guaraní

Gujarati

Haitian

Xhosa

Yiddish

Yoruba

Zhuang

Zulu

Hausa

Ojibwa

Hebrew

Herero

Oriya

Oromo

Others

Country Code List

Code

Country Name

Code

Country Name

Code

Country Name

Andorra

Gambia

Guinea

Niue

United Arab Emirates

Afghanistan

New Zealand

Oman

Guadeloupe

Equatorial Guinea

Greece

Antigua and Barbuda

Anguilla

Panama

Peru

Albania

South Georgia and South Sandwich

Islands

Polynesia

Armenia

Guatemala

Papua New Guinea

Philippines

Netherlands Antilles

Angola

Guam

Guinea-Bissau

Pakistan

Antarctica

Argentina

American Samoa

Austria

Guyana

Poland

Hong Kong

Saint Pierre and Miquelon

Pitcairn Islands

Puerto Rico

Portugal

Heard and McDonald Islands

Honduras

Australia

Croatia

Aruba

Haiti

Palau

Azerbaijan

Bosnia and Herzegovina

Barbados

Bangladesh

Belgium

Hungary

Paraguay

Indonesia

Qatar

Ireland

Reunon Island

Romania

Israel

India

Russian Federation

Rwanda

Burkina Faso

Bulgaria

British Indian Ocean Territory

Iraq

Saudi Arabia

Solomon Islands

Seychelles

Bahrain

Iran

Burundi

Iceland

Benin

Italy

Sudan

Bermuda

Brunei

Jamaica

Jordan

Sweden

Singapore

Bolivia

Japan

Saint Helena

Slovenia

Brazil

Kenya

Bahamas

Bhutan

Kyrgyzstan

Cambodia

Kiribati

Svalbard and Jan Mayen Islands

Slovakia

Bouvet Island

Botswana

Belarus

Sierra Leone

San Marino

Senegal

Comoros

Saint Kitts and Nevis

Belize

Korea, Democratic People's Republic SO

Somalia

Canada

Korea, Republic of

Kuwait

Suriname

Cocos Islands

Central African Republic

Congo, Republic of

Switzerland

Sao Tome and Principe

El Salvador

Cayman Islands

Kazakhstan

Laos

Syria

Swaziland

Cote d'Ivoire

Lebanon

Turks and Caicos Islands

Others

Cook Islands

Chile

Saint Lucia

Liechtenstein

Sri Lanka

Liberia

Chad

French Southern Territories

Togo

Cameroon

China

Thailand

Colombia

Lesotho

Tajikistan

Costa Rica

Cuba

Lithuania

Luxembourg

Latvia

Tokelau

Turkmenistan

Tunisia

Cape Verde

Christmas Island

Cyprus

Libya

Tonga

Morocco

East Timor

Czech Republic

Germany

Monaco

Turkey

Moldova

Trinidad and Tobago

Tuvalu

Djibouti

Madagascar

Marshall Islands

Mali

Denmark

Taiwan

Dominica, Commonwealth of

Dominican Republic

Algeria

Tanzania

Myanmar

Mongolia

Macau

Ukraine

Uganda

Ecuador

Minor Outlying Islands

United States

Uruguay

Estonia

Northern Mariana Islands

Martinique

Mauritania

Montserrat

Malta

Egypt

Western Sahara

Eritrea

Uzbekistan

Vatican

Spain

Saint Vincent and the Grenadine

Venezuela

Ethiopia

Mauritius

Maldives

Finland

British Virgin Islands

Virgin Islands of the United States

Vietnam

Fiji

Malawi

Falkland Islands (Malvinas)

Micronesia (Federated States of)

Faroe Islands

France

Mexico

Malaysia

Vanuatu

Mozambique

Namibia

Wallis and Futuna

Samoa

France, Metropolitan

Gabon

New Caledonia

Niger

Yemen

Mayotte

United Kingdom of Great Britain and

Northern Ireland

Norfolk Island

Yugoslavia

Grenada

Georgia

Nigeria

South Africa

Zambia

Nicaragua

Netherlands

Norway

Nepal

French Guiana

Ghana

Zaire

Zimbabwe

Gibraltar

Greenland

Nauru

Others

Using the HDMI Consumer

Electronics Control (HDMI

CEC)

Creating a Seamless BD

When titles are imported into the HDD in the HD quality from

a video camera, or when edited titles (e.g., after applying

scene delete) are dubbed to a disc, seamless playback may

not be possible at the joints of scenes. In this case, perform

dubbing after executing “SEAMLESS” under the “MODE

CHANGE” setting menu.

HDMI Consumer Electronics Control

By using a HDMI cable to connect this unit with a TV that

For details, refer to “Mode conversion” (A page 73) .

supports the HDMI CEC standard, this unit and the TV can

be linked and operated together.

Creating a seamless BD that uses “MODE

CONVERSION” (seamless conversion,

recording mode conversion)

HDMI CEC (Consumer Electronics Control) is an industrial

standard that allows HDMI devices to be linked and

operated among each other by connecting them with a

HDMI cable.

Procedures to create a seamless BDMV

File to import

If you do not want to

perform scene delete/

chapter delete

If you want to

perform scene

delete/chapter

delete

HDMI Consumer Electronics Control

operations

Perform the following operations when this unit is turned

AVCHD

MOV*

Recording mode

conversion

Seamless conversion

on, and the TV will switch automatically to the HDMI input

that this unit is connected to.

Playback from HDD, BD/DVD or SD CARD

Conversion not required Seamless conversion

Press the [NAVIGATION] or [SETUP] button

SD-VIDEO(HD)* Recording mode

HDV

Recording mode

conversion after

seamless conversion

Turning off the power for the TV will also turn the power off

for this unit automatically.

If HDD, BD/DVD or SD CARD is being used for dubbing,

the power will be turned off after dubbing finishes.

conversion after

seamless conversion

SD-VIDEO(HD)* : SD-VIDEO(JVC Everio MPEG2 TS)

MOV*

MOV files that are taken in SP mode using the

JVC ProHD Camcorder GY-HM700/100

Using HDMI Consumer Electronics Control

(activating the function)

Procedures to create a seamless BDAV

Connect this unit to a TV that is HDMI CEC

compatible using a HDMI cable

File to import

If you do not want to

perform scene delete/

chapter delete

If you want to

perform scene

delete/chapter

delete

Change the setting of “HDMI-CEC” to “ON”.

Check the monitor (TV) setting if the HDMI CEC function

does not work.

AVCHD

MOV*

Conversion not required Seamless

conversion

Memo:

If you are not using the HDMI CEC function (deactivating),

change the setting of “HDMI-CEC” to “OFF”.

Conversion not required Seamless

conversion

Note:

The HDMI CEC function cannot be used if a TV that is not

SD-VIDEO(HD)* Seamless conversion

HDV

Seamless

conversion

compatible with HDMI CEC has been connected.

If a HDMI cable is not used for connecting, the HDMI CEC

function will not be usable.

SD-VIDEO(HD)* : SD-VIDEO(JVC Everio MPEG2 TS)

MOV*

MOV files that are taken in SP mode using the

JVC ProHD Camcorder GY-HM700/100

Memo:

During dubbing to BDMV, the recording mode cannot be

specified.

Do not perform recording mode conversion before

seamless conversion. Otherwise, seamless conversion

cannot be performed.

If scene delete or chapter delete is applied to a title, it

cannot be dubbed to a BDMV disc without performing

seamless conversion.

For titles that use the H.264/AVC video compression format

such as AVCHD, titles using B-frames as reference for B-

frames (pyramidal reference format) are not supported.

For titles that are imported into the HDD in the SD picture

quality, you can create a seamless DVD by setting

“SEAMLESS PLAYBACK” under the “Setting Menu List” to

“ON”, followed by performing re-encode dubbing.

Refer to “SEAMLESS PLAYBACK” (A page 77) .

Others

Troubleshooting

Problem

Symptom

Action

Reference

Page

Power does not turn on The “HELLO” message remains

up.

Press the [RESET] button on the front

displayed, and the unit does not start panel.

(A page 13)

If it does not start up, stop using this unit,

unplug the plug from the power point, and

bring it to the dealer or “Service Center”.

“FAN LOCKED” is

displayed on the display

window of this unit

The cooling fan motor is not working. The cooling fan motor is spoiled. Remove

the power plug from the power point, and

consult the dealer from which this product

is purchased, or any nearby JVC Servicing

Center.

Power turns off

automatically

The “AUTO POWER (OFF)” setting is Change the “AUTO POWER (OFF)”

(A page 75)

set to “2 HOURS” or “6 HOURS”.

setting of “SETUP” to “OFF”.

The temperature of this unit has rose, Place this unit in an area with ventilation if

and operation has ceased for safety

purposes.

possible, and wait approximately 30

minutes for it to cool down.

The power turns on

automatically

The “HDMI-CEC” setting is set to

“ON”.

Change the “HDMI-CEC” setting of

“CONNECTION” to “OFF”.

(A page 81)

(A page 37)

(A page 81)

Input cannot be

switched

i.LINK connection is currently being

established.

Cancel importing, or wait until the

connection ends.

There are no video

images on the monitor

Monitor only supports RGB input.

Set “HDMI --> DVI COLOR” in the setting

menu to “RGB FIX”.

“HDCP ERROR” is displayed.

Use a monitor that supports HDCP.

Video images may be distorted during This is not a malfunction. Change the

reencoding/dubbing when the monitor “HDMI OUTPUT RESOLUTION” to a value

(A page 80)

(TV) is connected to this unit using a

HDMI cable, or when the screen

resolution is set to “1080p”.

other than “1080p” (e.g., 1080i) if you find

it annoying.

Screen is distorted

Video images may be distorted during This is not a malfunction. Change the

reencoding/dubbing when the monitor “HDMI OUTPUT RESOLUTION” to a value

(A page 24)

(TV) is connected to this unit using a

HDMI cable, or when the screen

resolution is set to “1080p”.

other than “1080p” (e.g., 1080i) if you find

it annoying.

There is no audio sound The “HDMI AUDIO OUTPUT” setting

is set to “OFF”.

Change the “HDMI AUDIO OUTPUT”

setting of “CONNECTION” to “ON”.

(A page 81)

(A page 78)

(A page 23)

The amplifier does not support

“BITSTREAM” output.

Use an amplifier that supports bitstream

output.

Dubbing cannot be

performed

The title to be dubbed is copyright

protected.

Titles that are copyright-protected cannot

be dubbed. Select a title that is not

A finalized disc has been inserted.

The disc is not formatted.

Insert a disc that has not been finalized.

Format the disc.

(A page 25)

The SD card is write-protected.

Remove the SD card and remove the write (A page 27)

protect lock.

High-speed dubbing

Dubbing cannot be performed and

Set “HIGH-SPEED DUBBING” in the

(A page 24)

cannot be performed for “SOME TITLES CANNOT BE

EP mode titles

settings menu to “4:3” before recording or

DUBBED” is displayed when trying to importing in the EP mode.

(A page 77)

perform high-speed dubbing of a EP

mode title to a DVD-VIDEO mode

disc.

Others

Troubleshooting

(Continued)

Problem

Symptom

Action

Reference

Page

Data cannot be

imported

The title to be dubbed is copyright

protected.

Titles that are copyright-protected cannot

be dubbed. Select a title that is not

(A page 23)

The number of titles stored in the HDD Delete or combine the titles in the HDD to

(A page 62)

has reached the maximum amount.

reduce the amount of titles to less than

500.

The remaining space on the HDD is

running out.

Delete the titles in the HDD to increase the (A page 62)

remaining space.

The title/group name

cannot be changed

Protection of the title/group name is

turned on.

Turn protection off for the title/group name. (A page 64)

The remote control

unit does not work

The battery of the remote control unit

has run out.

Change new batteries for the remote

control.

(A page 16)

The remote control code of this unit

and the remote control unit are

different from each other.

Change the “REMOTE CONTROL CODE” (A page 16)

for the remote control to the same number

used by this unit.

A “LOCKED” message appears on the Disable the “mode lock” setting.

display window of the unit.

(A page 82)

The disc cannot be

ejected

A “LOCKED” message appears on the Disable the “tray lock” setting.

display window of the unit.

The “READING” message does not

disappear from the unit's display

window, and the disc tray does not

Pressing the [ M ] button at the front of the

unit for five seconds or longer opens the

disc tray. To close the disc tray after

open when the [ M ] button is pressed. removing the disc, press the [ A ] button,

and wait until the tray is closed and power

is turned off.

(If the disc tray does not open after

pressing the [ M ] button for five seconds

or longer, consult our authorized dealer.)

The disc cannot be

played

A disc that cannot be played on this

unit is inserted.

Confirm that the disc is playable on this

unit.

(A page 10)

The region code of the BD or DVD is

different from that of this unit.

Confirm that the region number is playable (A page 10)

on this unit.

An unfinalized DVD disc that is

recorded using another device is

inserted.

Use that device to finalize the disc.

Output is at 480i

regardless of the

component output

resolution setting

The component output setting may be

changed to 480i after viewing at a

setting of 1080/24p using a HDMI

connection.

Turn the power off, and turn it on again.

The aspect ratios of

the HDMI output and

component output are component output terminals of this

When two monitors are connected

respectively to the HDMI output and

When two monitors are connected

simultaneously, users are recommended

to set “VIDEO PRIORITY MODE” to

“COMPONENT”.

(A page 80)

different

unit, the screen aspect ratio of the

component output may not be

appropriate if “VIDEO PRIORITY

MODE” is set to “HDMI”.

100

Others

Digital audio output:

Specifications

General

Power requirement

AC 120 V H, 60 Hz

Power consumption

Optical

: PCM, AAC, Dolby Digital and DTS

HDMI output

19-pin type A

(Deep Color, x.v.Color, Ver1.3)

USB terminal

USB2.0

Power on

Power off

: 34 W

: 3.0 W

SD memory card

SD, SDHC

Laser specification

For CD

HDD Deck

Wavelength

Output

: 779 nm to 789 nm

SR-HD1500US : 500 GB

: No hazardous radiation is emitted

with the safety protection.

SR-HD1250US : 250 GB

Recording compression system

Video

MPEG2 (VBR)

H.264/AVC

Audio

For DVD

Wavelength

Output

: 656 nm to 663 nm

: No hazardous radiation is emitted

with the safety protection.

Dolby Digital (2 ch)

Linear PCM (2ch, XP mode only)

For BD

Wavelength

Output

: 400 nm to 410 nm

BD/DVD Deck

: No hazardous radiation is emitted

with the safety protection.

Recording compression system

Video

Temperature

Operating

Storage

MPEG2 (CBR/VBR)

H.264/AVC

Audio

Dolby Digital (2 ch)

Linear PCM (2ch, XP mode only)

Region code

: 5 °C to 35 °C (41 °F to 95 °F)

: -20 °C to 60 °C (-4 °F to 140 °F)

Operating

position

: Horizontal only

Dimensions

(W x H x D)

: 435 mm x 70 mm x 351 mm

(17-1/10" x 2-6/8" x 13-13/16")

: Region A

: #1

DVD

Weight

ACCESSORIES

SR-HD1500US : 5.1 kg (11.2 lbs)

Provided accessories

SR-HD1250US : 5.0 kg (11.0 lbs)

AC power cord

Input/Output

Audio/Video cable

Video input

: 1.0 Vp-p, 75 K (BNC)

BNC male to RCA female adapter

Video output

: 1.0 Vp-p, 75 K (BNC)

Infrared remote control unit

Audio input

: Max 2 Vrms / 10 kK (pin jack)

: 2 Vrms / 10 kK terminated (pin jack)

“AA” battery x 2

Audio output

CD-ROM

S-video input

: 1.0 Vp-p, 75 K

: 0.286 Vp-p, 75 K

S-video output

: 1.0 Vp-p, 75 K

: 0.286 Vp-p, 75 K

: 4-pin for HDV/DV IN

Remote Input

φ3.5 mm Jack

Serial Command: D-SUB 9-PIN

Component video output:

: 1.0 Vp-p, 75 K

CB/CR, PB/PR : 0.7 Vp-p, 75 K

Memo:

Corresponding to copy protection

101

Others

MPEG2 ........................................................................ 9

Index

ON SCREEN ....................................................... 12, 79

OPTICAL ....................................................... 14, 18, 78

OSD LANGUAGE ..................................................... 79

AUDIO CABLE .............................................. 14, 18, 17

AUDIO LANGUAGE ...................................... 56, 76, 89

AUDIO/SUBTITLE SETTINGS .................................. 56

PICTURE QUALITY ................................ 23, 28, 40, 57

PLAYBACK NAVIGATION ............................ 15, 43, 48

PLAYBACK SETTINGS .......................... 16, 52, 56, 76

PROGRESSIVE OUTPUT ........................................ 57

BD (BD-R/BD-RE) ......................... 9, 10, 25, 39, 58, 93

BD MIX SOUND ........................................................ 79

BD VIDEO DATA ........................................................ 8

BDAV .............................................................. 9, 10, 24

BDMV .............................................................. 9, 10, 24

BD-ROM ........................................................ 10, 56, 93

BD-VIDEO RATINGS ................................................ 76

BLUE BACK .............................................................. 79

RECORDING MODE ...... 13, 15, 23, 24, 28, 47, 50, 87

REGION CODE ......................................................... 10

REMOTE CONTROL ........................ 13, 14, 15, 16, 82

REMOTE CONTROL CODE ............................... 16, 75

RESUME POINT ..................................... 51, 53, 54, 77

RS-232C ....................................................... 14, 19, 83

CHANGE ANGLE ...................................................... 56

CHANGE AUDIO OUTPUT ....................................... 56

CHANGE CHAPTER ................................................. 56

CHAPTER EDIT .................................................. 50, 67

CHAPTER MARK .................................... 16, 51, 67, 68

COMPONENT OUTPUT ........................................... 81

COMPONENT VIDEO CABLE ............................ 14, 17

CONNECTION ........................................ 17, 18, 19, 80

COUNTRY CODE LIST ...................................... 76, 96

SCREEN SAVER ...................................................... 79

SEAMLESS PLAYBACK ........................................... 77

SETTING THE DATE/TIME ...................................... 20

SUBTITLE LANGUAGE ...................................... 56, 76

S-VIDEO ................................................. 14, 17, 18, 81

TIME DISPLAY STYLE ....................................... 22, 75

DATE DISPLAY STYLE ...................................... 21, 75

DETAIL SETTING ..................................................... 57

DIGITAL NOISE REDUCTION .................................. 57

DIMMER (POWER ON) ............................................ 75

DISPLAY WINDOW ................................ 13, 14, 75, 82

Dolby Digital ........................................................ 77, 78

Dolby Digital Plus/TrueHD ........................................ 78

DTS ..................................................................... 10, 78

DTS-HD ..................................................................... 79

DUAL DISC ............................................................... 11

DVD (DVD-R/DVD-RW)

USB ................................................... 13, 18, 23, 29, 33

VIDEO CABLE .................................................... 14, 17

VIDEO MODE ................................................. 9, 10, 77

VIDEO INPUT SETTING ........................................... 81

VIDEO SETTINGS .................................................... 57

VR MODE ............................................................. 9, 10

...................... 9, 10, 23, 25, 30, 39, 46, 53, 58, 72, 93

DVD VIDEO ...................................... 10, 24, 30, 32, 76

FINALIZE ................................................ 10, 41, 44, 58

HDMI ............................................................. 14, 80, 81

HDMI AUDIO OUTPUT ............................................. 81

HDMI CABLE ................................................ 14, 17, 98

HDMI OUTPUT RESOLUTION ................................. 80

HDMI-CEC .......................................................... 81, 98

HIGH-SPEED DUBBING .................. 10, 23, 24, 39, 77

i.LINK ................................................ 13, 18, 23, 29, 37

JPEG ..................................... 24, 29, 30, 33, 35, 42, 55

LANGUAGE CODE ............................................. 76, 94

LOCKING THE DISC TRAY ...................................... 82

MENU LANGUAGE ................................................... 76

MODE LOCK ............................................................. 82

102

103

Printed in Thailand

1010MTH-SW-MT

Q2010 Victor Company of Japan, Limited

Radio Shack CID 2905 User Manual
Pyramid Car Audio Car Amplifier PB 1700 User Manual
Pioneer Car Video System AVH X6500DVD User Manual
Philips SJM3202 User Manual
Panasonic Low Profile Ceiling Mount PDM9 User Manual
Orion Car Audio HCCA 225R HCCA 250R HCCA 275R User Manual
Nokia BH 504 User Manual
Metra Electronics 99 7310 User Manual
Kenwood KFC W112 User Manual
Kenwood KDC 3026R User Manual