iSimple ISHD11 User Manual

Expand Your Factory Radio

add

Satellite

Radio

Harness Connection

Dip Switches

(See Manual)

Port 1

Port 2

USB

Honda/Acura

Owner’s Manual

Owner’s

Media Gateway

ISHD11

Manual

PGHHD1

Media Gateway

PXAMG

iSimple®

A Division of AAMP of America™

13190 56th Court Clearwater, FL 33760

Ph. 866-788-4237

[email protected]

www.isimplesolutions.com

Rev. 10-06-09

Media Gateway & Optional Add-ons

*The Media Gateway

will only support 2

inputs.

Factory Radio

Not Included

Media Gateway Harness

Part #: PGHHD1

Media Gateway

Part #: PXAMG

DVD Player

(not included)

Harness Connection



Dip Switches

(See Manual)



Port

USB

PXAMGSR Cable

MP3 Player

(not included)

1. Introduction

Thank you for purchasing the iSimple^®Media Gateway. The Media Gateway is

designed to provide endless hours of listening pleasure from your factory radio.

To ensure that your SCC1 satellite radio tuner performs correctly with your radio,

we recommend that you read this entire manual before attempting installation of

the Media Gateway.

The Media Gateway allows connectivity for Sirius Satellite Radio tuner (SCC1

sold seperately) enabling full control of this device from the factory installed

radio. It also retains original system features such as rear seat entertainment (if

equipped).

2. Precautions

PREVENTING DAMAGE TO YOUR VEHICLE OR IPOD.

To eliminate the risk of an electrical short, we recommend disconnecting the

vehicle’s battery prior to installation. If you do not feel comfortable making these

connections, we suggest you seek professional installation.

PROPER MOUNTING LOCATION

Securely install the interface in a location free from: heat, humidity, moving parts,

sharp metal edges or direct sunlight. We recommend securing the interface to a

suitable location using; double sided tape, Velcro^TMor zip-ties.

3. Compatibility

Your vehicle MUST either be equipped with, or have the ability to support

Satellite Radio. Please visit www.isimplesolutions.com for the most up to date

application information and to verify your vehicle’s compatibility.

4. Dipswitch Settings

All 4 dipswitches MUST be set in the OFF (up) position for proper operation.

ALL VEHICLES

5. Installation

1. When making electrical connections it is always recommended that the vehicle’s

battery be disconnected from the electrical system before performing the installation.

2. Carefully remove the trim panels covering the 8mm bolts that secure the radio into

the dash cavity. Remove these bolts, and carefully pull the radio from the dash of the

vehicle. This will provide access to the factory radio connectors where you will

connect the Media Gateway harness.

3. Disconnect the factory 14-Pin harness (if present) from the back of the radio.

4. When connecting the Satellite Radio tuner (SCC1 sold separartely), make the

folllowing connections before connecting the PXAMG to the vehicle. Plug the black

end of the 3 foot PXAMGSR (8-Pin mini-din to 8-Pin mini-din) into the second port

(closest to the dipswitches) on the Media Gateway. Connect the gray end of this cable

into the Satellite Radio tuner.

5. When connecting the auxiliary cable, plug the 8 pin mini-din into the port farthest

fromthedipswitches. Carefullyruntheauxiliarycabletothelocationwheretheauxiliary

device will be stored. If you are using the RCA input it may be necessary to run the

auxiliary device’s output cable to the PXAMG location.

6. Plug the male connector on the PGHHD1 harness into the 14-pin port on the back

of the radio. Next, connect the factory 14-pin harness (if present) into the female

connector on the PGHHD1 harness. Be sure to make a ﬁrm connection but do not

force it. Plug the Black micro-ﬁt 24-pin connector on the PGHHD1 harness into the

PXAMG Media Gateway box.

PLEASE NOTE: If your vehicle is equipped with a factory satellite radio tuner

it will have to be disconnected at the tuner location in order for the PXAMG to

function properly.

7. To complete the installation secure the Media Gateway (PXAMG) and Satellite

Radio tuner (SCC1) into the cavity in the dash behind the radio. Be sure that the

cables and interface modules are not near moving parts or sharp metal edges as they

may damage the cables. To prevent rattling noises inside the dash, use zip ties, tape,

or other fasteners to mount the interfaces securely.

8. With all connections made, reconnect the vehicle’s battery, insert the key into the

ignition, and turn the vehicle on. Check for proper operation of the Media Gateway and

Satellite Radio tuner before reinstalling the factory dash panels.

9. Note: The ﬁrst time you access the Gateway, your radio may display “DEV INIT”

while the device is initializing. If this is displayed, please wait one minute then cycle the

ignition off and on. Then access SAT mode again to begin normal gateway operation.

8. Sirius Satellite radio Operation

Entering Mode Select Menu

Press the “AM-FM” button then press the “XM or “AUX” button. Turn the rotary TUNE

KNOB or press “TUNE ▲” until “SIRIUS” is displayed. The PXAMG will auto select

the mode after 6 seconds of inactivity.

Channel Up

Turn the rotary TUNE KNOB clockwise or press the “TUNE ▲” button to move up

through the channels

Channel Down

Turn the rotary TUNE KNOB counter-clockwise or press the “TUNE ▼” buttonto

move down through the channels

Category Selection

Non-Navigation Radios

Press the “FOLDER ▲” or “FOLDER ▼” button to move through the categories

Navigation Radios

Press the “ENTER” button to bring up the categories menu. Turn the ROTARY KNOB

until the category you wish to select is highlighted. Press the “ENTER” button to select

the displayed category.

Store Presets

Press and hold the preset button (1-6) for 2 seconds where you wish to store the pre-

set. An audible beep will be heard when station has been stored sucessfully.

Recall Presets

Press the preset button (1-6) for the preset you wish to recall.

Changing Display

Press the “DISP” button to display artist and track information

9. Selecting AUX Input

Entering Mode Select Menu

Press the “AM-FM” button then press the “XM or “AUX” button. Turn the rotary TUNE

KNOB or press “TUNE ▲” until “AUX” is displayed. The PXAMG will auto select the

mode after 6 seconds of inactivity.

10. Troubleshooting

Symptom

Cause

Remedy

I don’t see artist or The radio is

Press the Text / Scan button to see

song information

on the screen

displaying a different text

text ﬁeld

The Media

The Satellite tuner

was not properly

connected when

the PXAMG was

ﬁrst connected and

initialized.

SCC1 must be connected before the

PXAMG is powered on. Disconnect

the PXAMG from the vehicles harness

for 5 minutes. Verify the 8 pin DIN

SCC1 cable is securely connected

at both ends before reconnecting the

vehicle harness.

Gateway does

not recognize the

Satellite Radio

tuner (SCC1)

Radio shows “DEV Gateway device is

INIT” initializing

This only occurs the ﬁrst time the

PXAMG is powered on. Wait a few

minutes, cycle ignition off and on then

enter SAT Mode.

11. Warranty

One Year Limited Warranty

The quality controls used in the manufacture of this product will ensure your satisfaction.

This warranty applies only to the original purchaser of this product from an authorized

iSimple^®dealer. This warranty covers any supplied or manufactured parts of this prod-

uct that, upon inspection by iSimple^®authorized personnel, is found to have failed in

normal use due to defects in material or workmanship. This warranty does not apply to

installation expenses. Attempting to service or modify this unit, operating this unit under

conditions other than the recommended voltage will render this WARRANTY VOID.

Unless otherwise prescribed by law, iSimple^®shall not be liable for any personal injury,

property damage and or any incidental or consequential damages of any kind (includ-

ing water damage) resulting from malfunctions, defects, misuse, improper installation or

alteration of this product. All parts of this iSimple^®product are guaranteed for a period

of 1 year as follows:

Within the ﬁrst 12 months from date of purchase, subject to the conditions above,

iSimple^®will repair or replace the product at their discretion, if it is defective in material

or workmanship providing it is returned to an Authorized iSimple^®dealer, with PROOF

OF PURCHASE from an authorized iSimple^®dealer.

Warning:

This equipment may be reset by unintentional electrostatic discharge during operation.

Exposure to direct sunlight or extreme heat may cause damage or malfunction.

FCC Class B Radio Frequency

Interference Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

1. Re-orientate or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from

that of which the receiver is connected.

4. Consult the dealer or an experienced radio / television technical for help.

Notice : The changes or modiﬁcations not expressly approved by the party responsible

for compliance could void the user authority to operate the equipment.

Notes

____________________________________________________

_ ____________________________________________________

Notes

____________________________________________________

_ ____________________________________________________

www.isimplesolutions.com

For Best Performance Have It

Professionally Installed.

AmpliVox S1960 User Manual
ATN NVG7 User Manual
Burley Flatbed User Manual
Duracell DRCHCAM User Manual
DXG Technology DXG DXG 506V User Manual
Gitzo Classic Pro Studex Mk2 G1411 User Manual
Grindmaster G MG Series User Manual
Jensen SMPS 600 User Manual
JVC GR DVL567 User Manual
JVC GR SXM340 User Manual