VM9022HD
Installation and Operation Manual
video
Watts Peak
60w x 4 | 40w x 1
280
CONTENTS
Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s
manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to
use all the features of your new Jensen VM9022HD Mobile Multimedia Receiver for maximum
enjoyment.
Preparation............................................................................................................................ 1
Installation............................................................................................................................. 5
Anti-Theft Feature ................................................................................................................. 7
Controls and Indicators ......................................................................................................... 8
Remote Control................................................................................................................... 10
Using the TFT Monitor ........................................................................................................ 13
Operating Instructions......................................................................................................... 14
Multi-ZONE Operation......................................................................................................... 16
Setup Menu......................................................................................................................... 17
Tuner Operation.................................................................................................................. 19
Satellite Radio Operation .................................................................................................... 21
DVD/VCD Video Operation................................................................................................. 23
DVD/CD Audio Operation ................................................................................................... 26
MP3/WMA Operation .......................................................................................................... 27
iPod Operation .................................................................................................................... 29
Bluetooth Operation ............................................................................................................ 31
Troubleshooting .................................................................................................................. 34
Specifications...................................................................................................................... 37
i
ii
VM9022HD
PREPARATION
MediaLink4
Congratulations on your purchase of the Jensen VM9022HD
Mobile Multimedia Receiver.
•
Under Dash Interface Allows Portable Media Devices to
It’s a good idea to read all of the instructions before beginning
the installation. We recommend having your Jensen
VM9022HD installed by a reputable installation shop.
be Connected
MediaLink4 Includes the Following Connectivity:
•
•
USB – Supports Flash Memory and Hard Drives with
Audio Files
Features
DVD
•
•
•
LinkDirect iPod Connectivity
3.5mm Audio Only Input
RCA Audio /Video Input
•
•
•
•
Aspect Ratio – Cinema and Normal
Fast Forward / Reverse – 2X, 4X, 6X and 8X
Play, Pause, Stop, Next Chapter and Previous Chapter
ESP – 2MB Buffer
Chassis
•
•
•
•
•
2.0 DIN (Import / ISO-DIN Mountable)
Motorized Swing-Down LCD Screen
6.5" TFT Active Matrix LCD with Anti-Glare Coating
Screen Tilt / Angle Adjustment
Heat Management System - Forced Air-Cooling to Keep
the Chip-Sets Operating at Nominal Temperatures
CD / MP3 / WMA
•
•
•
•
ID3 Tag Compatible
Directory Search (MP3 / WMA Only)
Direct Track Access via Remote control
Burn up to 1500 MP3 and WMA Files onto a DVD+R /
RW
General
•
Bluetooth – Bluetooth hands-free profile for safety /
convenience and A2DP profile for streaming music from
a PDA / PMP
•
•
•
•
Audible Forward / Reverse Track Search
Random, Repeat and Intro
Play, Pause, Stop, Next Track and Previous Track
ESP – 2MB Buffer
•
•
•
•
Navigation Ready (Nav101 only)
38-Key Infrared Remote Control with 5-way Joystick
Two Composite Video Outputs for Additional Screens
Compatible with MZ7TFT Rear Seat Monitors with
Touch Screen Interface
Tuner
•
•
•
•
•
•
HD Radio Tuner*
USA / Europe Frequency Spacing
24 Station Presets (18 FM / 6 AM)
Auto Stereo / Mono
Auto Store
RDS – Radio Data System
•
•
•
•
•
•
•
•
Two Audio /Video Auxiliary Inputs
200-Ohm Preamp Line Output – All Audio Channels
4VRMS Line Output – All Channels
Rotary Encoder Audio Control
Seven-Band EQ with Eight Preset EQ Curves
Spectrum Analyzer
Front, Rear, Center and Subwoofer Line Output
Built-In Integrated Center Channel Amplifier
(40 Watts X 1)
Subwoofer Crossover and Phase Control
Dolby Digital / Pro-Logic ll
Programmable Volume Control
Rear Camera Input (Normal and Mirror Image View)
5-Way Joystick
SWC Interface – Compatible with PAC adapter SWI-PS
Steering Wheel Control Interface, sold separately
Satellite Radio Ready
•
•
Compatible with XM Tuners (Sold Separately)
Requires XMDJEN100 or JXMC cables for XMD1000
only (Sold Separately)
•
Satellite Channel Name, Artist, Song and Categories
displayed on TFT Screen
•
•
•
•
•
•
iPod
•
jLinkDirect - High Speed Direct Connect Interface to
Access iPod Playlists, Artists, Albums, Songs, Photos**
and Video**. (** Requires Gen 5.5 or earlier Photo or
Video iPod. iPhone, iPod Touch, iPod Classic, and iPod
Nano with Video will only play music files.)
•
•
Power Management Charges iPod while Connected
Requires jLinkCable iPod Interface Cable (included)
*HD Radio™ Technology Manufactured Under License From
iBiquity Digital Corporation. U.S. and Foreign Patents. HD
Radio™ and the HD and HD Radio logos are proprietary
trademarks of iBiquity Digital Corporation.
1
VM9022HD
Optional Equipment
Tools and Supplies
You will need these tools and supplies to install your
VM9022HD:
WARNING! To prevent damage to the mechanism inside
this unit, avoid impact to the TFT monitor.
•
NAV101
The VM9022HD is "navigation ready." Before accessing
any navigation features, you must purchase and install
the NAV101 module. All installation and operating
instructions will be included with the NAV101 navigation
module.
•
•
•
Torx type, flat-head and Philips screwdrivers
Wire cutters and strippers
Tools to remove existing radio (screwdriver, socket
wrench set or other tools)
Electrical tape
Crimping tool
Volt meter/test light
Crimp connections
18 gauge wire for power connections
16 – 18 gauge speaker wire
WARNING! Using an improper fuse may cause damage
to the unit and result in a fire.
Once the NAV101 is connected and operating properly,
the NAV source mode will become active. While the
NAV101 is not installed, the NAV option appears gray,
indicating the function is not available.
Rear Camera
•
•
•
•
•
•
•
The VM9022HD is "camera ready." Before accessing
any camera features, you must purchase and install a
rear video camera. Once the rear camera is connected
and operating properly, the CAMERA source mode will
become active. While the camera is not installed, the
CAMERA option appears gray, indicating the function is
not available.
Disconnecting the Battery
To prevent a short circuit, be sure to turn off the ignition and
remove the negative (-) battery cable prior to installation.
NOTE: If the VM9022HD is to be installed in a car
equipped with an on-board drive or navigation computer,
do not disconnect the battery cable. If the cable is
disconnected, the computer memory may be lost. Under
these conditions, use extra caution during installation to
avoid causing a short circuit.
•
•
•
•
Satellite Radio Tuner
See “Satellite Radio Operation” on page 21.
jLinkCable and iPod
See “MP3/WMA Operation” on page 27.
Bluetooth Phone
See “Bluetooth Operation” on page 31.
3.5mm to 3.5mm Audio Cable
WARNING! Only connect the unit to a 12-volt power
supply with proper grounding.
Sold separately at various retailers.
What’s in the Box
1. Left and Right Double DIN Mounting Brackets
2. Double DIN Half Sleeve Install Bracket
3. Remote Control with Battery
4. Rear Support Mounting Strap
5. jLink iPod Cable
WARNING! Never install this unit where operation and
viewing could interfere with safe driving conditions.
WARNING! To reduce the risk of a traffic accident (except
when using for rear view video camera), never use the
video display function while driving the vehicle. This is a
violation of federal law.
6. HD Radio Module
7. HD Radio Module connecting DIN cable
8. HD Radio Module Mounting Hardware
9. Two Custom Cosmetic Trim Rings
10. Parking Brake Wire
WARNING! Never disassemble or adjust the unit.
11. MediaLink
12. Screen Cleaning Cloth
13. M5x6 and M3x4 Screws to Mount Radio to Brackets
14. Speaker Output Harness
15. Power Input Harness
WARNING! To prevent injury from shock or fire, never
expose this unit to moisture or water.
16. Center Channel Wire Harness
WARNING! Never use irregular discs.
2
VM9022HD
WIRING DIAGRAM
MediaLink Cable / BLACK
External
A/V System
*NOTE:
See the
Module
MZ7-TFT Touch
Screen (Sold
Separately)
Connections
Diagram for
additional
connections
through the
MediaLink.
NAV Bus
MZ7-TFT
AUX IN 1
CAMERA
AUX IN 2
*MediaLink
Steering Wheel Control
(SWC) requires PAC
SWI-PS Interface Adapter,
Sold Separately
Cell Phone
HEADPHONE
MULTIZONE
* Satellite
Receiver
Connections
WIRELESS
HEADPHONE
(OPTIONAL)
BLUE/WHITE
P.CONT
-
BATTERY
Auto Antenna
3
VM9022HD
MODULE CONNECTIONS
Compatible SAT Tuners:
1. XMD1000 (requires XMC or
XMDJEN100 Cable Kit)
2. CNP2000UC
Requires Gen 5.5 or
earlier photo or video
iPod. iPhone, iPod
Touch, iPod Classic
and iPod Nano with
video will only play
music files.
*
*
4
VM9022HD
INSTALLATION
ISO DIN Installation
CAUTION: For proper operation of the CD player, the
chassis must be mounted within 30° of horizontal. Make
sure the unit is mounted within this limitation.
This unit is designed to fit into a 2.0 DIN dashboard opening,
found in many imported cars. The unit has threaded holes in
the chassis side panels which may be used with the original
factory mounting brackets of some Toyota, Nissan,
Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the
radio to the dashboard. Please consult with your local car
stereo specialty shop for assistance on this type of
installation.
TAB
NOTE: It is the end-users responsibility to install and
operate this unit in a manner in accordance with local,
state and federal laws. The PARKING BRAKE wire MUST
BE CONNECTED as directed in the manual.
TAB
1. Remove the existing factory radio from the dashboard or
center console mounting. Save all hardware and brack-
ets as they will be used to mount the new radio.
2. Remove the factory mounting brackets and hardware
from the existing radio and attach them to the new radio.
DASHBOARD
CAUTION: Do not block the cooling fan exit. If blocked,
the unit may overheat and become damaged.
DASHBOARD
Installation Using Half-Sleeve
1. Press the metal levers on both sides to remove the half-
sleeve from the radio.
2. Install the half-sleeve.
3. Use the M5 x 6 screws (provided) to install the mounting
brackets to each side of the radio using the holes
indicated below.
ISO INSTALLATION
a. Install adapter if necessary (optional).
b. Install half-sleeve into adapter or dashboard (use
only the supplied screws). Do not force the sleeve
into the opening or cause it to bend or bow.
INSTALL HALF SLEEVE
CAUTION: Do not exceed M5 X 6MM screw size. Longer
screws may touch and damage components inside the
chassis.
Install Bracket Here
2b
Non-Designated
Screw Prohibited
3. Place the radio in front of the dashboard opening so the
wiring can be brought through the mounting sleeve.
Follow the wiring diagram carefully and make certain all
connections are secure and insulated with wire nuts or
electrical tape. After completing the wiring connections,
plug the ISO connectors into the mating sockets on the
rear of the chassis. Turn the unit on to confirm operation
(vehicle ignition switch must be “on”). If the unit does not
operate, re-check all wiring until the problem is
corrected.
M5X6
SCREW
c. Locate the series of bend-tabs along the top,
bottom and sides of the mounting sleeve. With the
sleeve fully inserted into the dashboard opening,
bend as many of the tabs outward as necessary so
that the sleeve is firmly secured to the dashboard.
BRACKET
4. Mount the new radio assembly to the dashboard or
center console using the reverse procedure in step 1.
4. Place the radio in front of the dashboard opening so the
wiring can be brought through the mounting sleeve.
5
VM9022HD
The 4 tabs on the trim ring will snap into four holes on top and
bottom of the mounting sleeve.
CAUTION! Be careful not to damage the car wiring.
5. Complete wiring as illustrated in the wiring diagram on
page 3. Once the wiring is complete, reconnect the
battery negative terminal. If there is no ACC available,
connect the ACC lead to the power supply with a switch.
TRIM RING
MOUNTING SLEEVE
MOUNTING
SLEEVE
Installing the MediaLink External AV
Connector
The MediaLink allows you to connect a variety of external
devices, including a VCR, DVD player, portable MP3 player,
etc., to your VM9022HD without removing the radio.
To install the MediaLink, connect it to the AUX-IN cables on
the back of the VM9022HD (see the Wiring Diagram on page
3), and then install the MediaLink in a location convenient for
plugging in auxiliary devices.
M3x4
SCREW
After completing the wiring connections, turn the unit on to
confirm operation (ignition switch must be on). If unit does not
operate, recheck all wiring until problem is corrected. Once
proper operation is achieved, turn off the ignition switch and
proceed with final mounting of the chassis.
Replacing the Fuse
When replacing the fuse, use a new 20A replacement fuse.
Using a fuse with an improper rating could damage the unit
and cause a fire.
1. Connect wiring adapter to existing wiring harness.
2. Connect antenna lead.
3. Carefully slide the radio into the half-sleeve, making
sure it is right-side-up, until it is fully seated and the
spring clips lock it into place.
Using the Cosmetic Trim Ring
Two cosmetic trim rings are packaged with the VM9022HD
for installation flexibility. The VM9022HD will fit into most
import dashes with little or no modification to the dash board/
cavity. Some US domestic vehicle dashes will accept a
Double-DIN chassis, but there is usually a small gap between
the radio and dash piece after installation is complete. In this
case, use the appropriate trim ring to conceal any gaps that
may be present.
6
VM9022HD
ANTI-THEFT FEATURE
The VM9022HD is equipped with an anti-theft feature
requiring the user to enter a password upon initial power on.
3. Touch the keypad icon next to the blue box in the
“Password” field to open the on-screen keypad.
02:40 AM
RADIO
SETUP
Enter Password:
1
4
7
0
2
5
8
3
6
9
General
Language
Audio
Speaker Bluetooth Back
RDS
Rating
Demo
Password
Rating
1
4
7
0
2
3
6
9
8. Adult
Reset
5
8
Load Factory
Hardware
P.VOL
Clear
TS Cal
4. Enter a new 6-digit password and press the Enter
(arrow) button.
Entering the Default Password
The default user password is 012345 (6 digits). Enter the
password using the on-screen keypad and then press the
Enter (arrow) button. You can also use the remote control
keypad to enter the password.
The "lock" icon will now appear closed and the new anti-
theft password will be set, as well as the password for
RATING protection (see “Rating Sub-menu Features”
on page 18).
NOTE: If you forget your password, contact Customer
Service at 1-800-323-4815 for assistance.
Press the joystick Enter button (18) on the remote control to
confirm.
Changing the Password
To change the anti-theft and RATINGS protection password,
perform the following steps:
1. Press the SETUP button (31) on the remote control or
touch the
button on the screen to enter the
“SETUP” menu.
2. Touch RATING to view the “RATING” sub-menu. An
open lock icon to the right of the “Password” field
indicates that a user password had not yet been
entered.
7
VM9022HD
CONTROLS AND INDICATORS
Button Operation
1. OPEN
Press to activate the automatic mechanical system and move
the TFT monitor into viewing position. Press again to close
the TFT.
2. DISP/TILT
Press to cycle through information available on the TFT
screen.
In DVD Mode, press to view the top and bottom information
bars. Press again to turn “Display Off”.
Press and hold to activate the screen tilt function (use the
joystick to adjust the angle).
3. AS
Press to automatically store the first six strong stations in
preset memory. Applies to current band only.
4. BAND
Press the BAND button to change the AM, FM or SAT band.
5. AUDIO
Rotate to adjust the volume. Press to enter and/or confirm
audio settings.
6. SRC
Press to select playing mode.
When you change the source during navigation, the voice
prompts will still be heard, although the navigation map
cannot be seen. (The selected source audio will be muted
until the navigation voice prompt command is completed,
after which the source audio will resume.)
7. WIDE/PIC
Press to adjust the display aspect of the picture to one of
three settings: CINEMA, NORMAL or Standby (screen off).
Touch the screen to turn Standy mode off. NOTE: Only
CINEMA and Standby are available for non-video sources.
Press and hold to adjust Brightness and Contrast.
8. MUTE
Press to silence the receiver. Press again to resume the
previous volume level.
9. IR Remote Control Receiver
10. (left joystick)
11. (down joystick)
BT Mode: Answer/dial Bluetooth call.
DVD/Disc Mode: Press once for slow forward/slow reverse.
TUNER Mode: Press to go down one frequency step.
MENU Mode: Press once to move the cursor down.
12. Reset
DVD/Disc Mode: Press once to play back the previous
chapter/track.
NOTE: The VM9022HD features Softmute, which will
allow the volume to increase or decrease gradually when
the MUTE function is activated or deactivated.
TUNER Mode: Press once to auto-search for the previous
available radio station.
Press to reset system settings to factory default (except the
password and parental lock setting).
MENU Mode: Press once to move the cursor to the left.
8
VM9022HD
CONTROLS AND INDICATORS
13.Pause/Play/Enter
Press to pause or resume playback or to confirm current
selection.
14. (right joystick)
DVD/Disc Mode: Press once to enter the next chapter or
track.
TUNER Mode: Press once to auto-search the next available
radio station.
MENU Mode: Press once to move the cursor to the right.
15. (up joystick)
DVD/Disc Mode: Press once for fast forward/fast reverse.
TUNER Mode: Press to go up one frequency step.
MENU Mode: Press once to move the cursor up.
16. (
)
Press once for disc insertion/ejection.
Press and hold to reset core mechanism position.
17. TFT Display
18. REAR
Select rear zone source. Allows front passengers to listen to
the radio while rear passengers listen to a CD, MP3, WMA or
watch DVDs.
BT Mode: Disconnect Bluetooth call.
19. RPT
Press to control repeat playback function.
20. PIP
Press to activate the Picture In Picture function.
NAV101 (optional): Press and hold to return to the NAV101
user interface.
21. SD Card Slot
Insert SD card for playback of audio files.
9
VM9022HD
REMOTE CONTROL
The VM9022HD Remote controls both the front and rear
zones. To switch from front to rear zone, move the F/R switch
(32) located on the right side of the controller.
30
8
4
35
14
31
16
18
19
17
15
32
2
3
22
13
1
11
9
5
24
28
12
23
25
21
20
10
27
26
6
29
7
33
34
NOTE: Your remote control may differ slightly from the
one pictured here. The above diagram is for illustrative
purposes only.
10
VM9022HD
Table 1: Remote Control Functions
Button
Function
TUNER
Name
Ref#
DVD
VCD
CD/MP3
SATELLITE
iPod
MENU
1
Enters the main menu of the
disc
Turns on/off PBC when play-
ing VCD
Displays diagnostics screen
Displays iPod menu
TITLE
MUTE
2
Enters the title menu of the
disc
Plays first ten seconds of each
chapter/title
Category list in CG mode
3
4
Toggles on/off audio output
Turns the power on/off
Toggles on/off audio output
Turns the power on/off
Toggles on/off audio output
Turns the power on/off
Toggles on/off audio output
Turns the power on/off
Toggles on/off audio output
Turns the power on/off
Toggles on/off audio output
Turns the power on/off
POWER/
AUDIO
5
6
7
Changes the audio language
for disc playback
Selects Music mode
Selects iPod Music mode
RPT A-B
RPT
Setup to repeat playback from Setup to repeat playback from
time frame A to time frame B
time frame A to time frame B
Repeats chapter/title
Repeats track/disc
Repeats track/folder/disc
Repeats playback of current
track
SRC
8
9
Selects playing source
Selects playing source
Selects playing source
Selects playing source
Selects Photo mode
Selects playing source
Selects playing source
SUBTITLE
Language selection for subti-
tle
Selects iPod Photo mode
DISP/
CLEAR
10
Displays playing information/
Delete entry or move back-
Displays playing information/
Delete entry or move back-
Displays audio mode
Displays audio mode
Displays audio mode
Displays audio mode
Delete entry or move back-
Delete entry or move back-
Delete entry or move back-
Delete entry or move back-
wards to correct error in Direct wards to correct error in Direct wards to correct error in Direct wards to correct error in Direct wards to correct error in Direct wards to correct error in Direct
Access mode
Access mode
Access mode
Access mode
Access mode
Access mode
11
12
13
Zooms in when playing DVD
or Photo
Zooms in
Navigates the preset station
list
Navigates list window
Navigates the preset station
list
Navigates list window
PRESET
PRESET
ANGLE
Zooms out when playing DVD Zooms out
or Photo
Navigates the preset station
list
Navigates list window
Selects Video mode
Navigates the preset station
list
Navigates list window
Plays back disc in different
angle (if available) for a scene different angle (if available) of
picture displayed
Plays back Picture CD with
Switches MEM keypad off
Switches MEM keypad off
Selects iPod Video mode
Joystick /\
VOL -
14
15
16
17
Fast forwards the disc content Fast forwards the disc content
Fast forwards the disc content
Decreases volume
Accesses iPod Menu
Decreases volume
Increases volume
Selects prior track
Decreases volume
Increases volume
Decreases volume
Increases volume
Decreases volume
Increases volume
Decreases volume
Increases volume
VOL +
Increases volume
Joystick <
Selects the previous chapter
for playback
Selects the previous chapter
for playback
Searches an available radio
station by decreasing tuning
frequency
Selects the previous track for
playback
Searches an available radio
station by decreasing tuning
frequency
Joystick
(press)
18
19
ENTER, Pauses playback/
starts playback
ENTER, Pauses playback/
starts playback
Auto memory scan
ENTER, Pauses playback/
starts playback
ENTER, Toggles the on-
screen menu between CAT/
CH mode
ENTER
Joystick >
Selects the next chapter for
playback
Selects the next chapter for
playback
Searches an available radio
station by increasing tuning
frequency
Selects the next track for play- Searches an available radio
back
Selects the next track for play-
back
station by increasing tuning
frequency
20
21
22
Stops playback
Stops playback
Stops playback
GOTO
Enters Direct Access mode
Enters Direct Access mode
Enters Direct Access mode
Enters Direct Access mode
Fast reverses the disc content
Enters Direct Access mode
Enters Direct Access mode
Joystick \/
Fast reverses the disc content Fast reverses the disc content
Pauses playback/starts play-
back
11
VM9022HD
Table 1: Remote Control Functions
Function
Button
Name
Ref#
DVD
VCD
TUNER
CD/MP3
SATELLITE
iPod
||>/BAND
23
Slow Forward/Slow Reverse
X2, X4, X8
Slow forward X2, X4, X8
Selects AM/FM Band.
Selects SAT1, SAT2 or SAT3
band.
PIC
24
25
Displays Brightness/Contrast
Controls
Displays Brightness/Contrast
Controls
Displays Brightness/Contrast
Controls
Displays Brightness/Contrast
Controls
Displays Brightness/Contrast
Controls
Displays Brightness/Contrast
Controls
OPEN/
CLOSE
Opens/closes the TFT monitor Opens/closes the TFT monitor Opens/closes the TFT monitor Opens/closes the TFT monitor Opens/closes the TFT monitor Opens/Closes the TFT moni-
tor
26
27
28
Decreases monitor tilt angle
Increases monitor tilt angle
Decreases monitor tilt angle
Increases monitor tilt angle
Decreases monitor tilt angle
Increases monitor tilt angle
Decreases monitor tilt angle
Increases monitor tilt angle
Decreases monitor tilt angle
Increases monitor tilt angle
Decreases monitor tilt angle
Increases monitor tilt angle
TILT
TILT
WIDE
Selects display mode: CIN-
EMA, NORMAL or Standby
Selects display mode: CIN-
EMA, NORMAL or Standby
Selects display mode: CIN-
EMA or Standby
Selects display mode: CIN-
EMA or Standby
Selects display mode: CIN-
EMA or Standby
Selects display mode: CIN-
EMA or Standby
1, 2, 3, 4, 5, 29
6, 7, 8, 9, 0
(Numeric
Directly accesses chapter
1-18 selects preset for current Directly accesses track
band
1-6 selects preset for current
band
Keypad)
PIP
30
Picture In Picture view of
Front source, Rear Zone or
NAV
Picture In Picture view of
Front source, Rear Zone or
NAV
Picture In Picture view of
Front source, Rear Zone or
NAV
Picture In Picture view of
Front source, Rear Zone or
NAV
Picture In Picture view of
Front source, Rear Zone or
NAV
Picture In Picture view of
Front source, Rear Zone or
NAV
SETUP
F/R
31
32
Displays Setup menu
Displays Setup menu
Displays Setup menu
Displays Setup menu
Displays Setup menu
Displays Setup menu
F controls front zone
R controls rear zone
F controls front zone
R controls rear zone
F controls front zone
R controls rear zone
F controls front zone
R controls rear zone
F controls front zone
R controls rear zone
F controls front zone
R controls rear zone
RDM
33
34
35
Plays all chapters in random
order
Plays all tracks in random
order
Plays all tracks in random
order
SCN
Preview scan
Ejects disc
Plays the first ten seconds of
each track
Preview scan
Ejects disc
EJECT
Ejects disc
Ejects disc
Ejects disc
Ejects disc
12
VM9022HD
USING THE TFT MONITOR
Parameter Adjustment Procedure
Open/Close TFT Monitor
Open TFT Monitor
Aspect Ratio
Press the WIDE button (28) on the remote control or WIDE/
PIC button (7) on the monitor to adjust the aspect ratio as
follows (only active with video source):
1. Enter Picture Quality Setting Mode:
Press the PIC button (24) on the remote control or press
and hold the WIDE/PIC button (7) on the monitor.
2. Select Item to Set:
Press the OPEN button (1) on the front panel or press the
(
) button (25) on the remote control to slide the monitor
panel down to reveal the disc and SD card slots.
Close TFT Monitor
Use the up/down joystick buttons to select “BRIGHT” or
“CONTRAST”.
3. Set Parameters:
Press the OPEN button (1) on the front panel or press the
CINEMA
Use the left/right joystick buttons to modify the settings.
4. Exit Picture Quality Setting Mode:
Press the PIC button on the remote control or the WIDE/
PIC button on the monitor
(
) button (25) on the remote control close the monitor
The entire screen is extended
horizontally to the aspect ratio of 16 to
9. The extension ratio is the same at
any point.
panel.
Monitor Tilt Angle Adjustment
A known characteristic of LCD panels is the quality of the
display in relationship to the viewing angle. The monitor
angle can be adjusted for optimum viewing using one of the
following methods.
Parking Brake Inhibit
NORMAL
The conventional display image has a
4 to 3 ratio of horizontal to vertical,
leaving a blank area on the right and
left sides of the display.
When the pink "Parking" wire is connected to the vehicle
Parking Brake circuit, the front TFT monitor will display video
when the Parking Brake is engaged. (When the pink wire is
grounded via the Parking Brake circuit, video will be
displayed.)
Step by Step Angle Adjustment
Press the ( ) or ( ) button on the remote control (26, 27)
to adjust the tilt angle of the screen one step at a time.
STANDBY
Screen becomes black. Touch screen
to resume.
Continuous Angle Adjustment
Press and hold the ( ) or ( ) button on the control panel
or remote control to adjust the tilt angle in a continuous
motion.
Image Setting
Table 2 shows the video output mode for each playing
source.
Reverse Driving Use
If the rear-view video camera is connected, the unit is on, and
the monitor is stationed inside the main compartment of the
unit, the monitor automatically moves into the viewing
position and switches to CAMERA mode upon reverse
driving. When the reverse driving stops, the monitor returns
to the main storage compartment.
Table 2: Video Output Modes
Playing Source
Video Output Modes
RADIO
RGB Mode
RGB Mode
RGB Mode
RGB Mode
CVBS Mode
CVBS Mode
RGB Mode
CVBS Mode
SAT
If the monitor is in display mode, the monitor automatically
switches to CAMERA mode upon reverse driving. When the
reverse driving stops, the monitor returns to its original input
mode.
DISC
BT
AUX 1
AUX 2
NAV
CAMERA
*CVBS – Composite Video Baseband Signal
13
VM9022HD
OPERATING INSTRUCTIONS
adapter. Please refer to the instructions included with the
PAC adapter for detailed installation information.
music files from a portable music player, video from a video
camera and even view photos stored on a digital camera.
Power On / Off
Press the /SRC button (6) (or any other button on the front
SWC Functions
Select “AUX2” mode to access and control auxiliary devices
connected to the “AUX IN 2” inputs on the back of the radio.
of the unit except reset), or the /POWER button (4) on the
remote control, to turn the unit on. The buttons on the front of
the unit light up and the current mode status appears on the
TFT screen (17).
The following controls are available for most vehicles:
1. Vol Up
2. Vol Down
3. Mute
4. Seek Up / Next Track / ** Preset Up
5. Seek Down / Previous Track / ** Preset Down
6. SRC (Source)
7. ** Select
8. ** Select
01:53 PM
No Video Signal
AUX1
Press and hold the button to power off the unit.The monitor
is drawn back into the main compartment.
E
Q
Audible Beep Confirmation
An audible beep tone confirms each function selection. The
Beep tone can be disabled through the Setup menu.
R
E
A
R
9. Band
P
I
P
** If additional steering wheel control buttons are available on
the vehicle, function 7 / 8 may be assigned the "Select"
feature. This feature / function may not be available on some
vehicles.
Volume Adjustment
To increase or decrease the volume level, turn the rotary
encoder (5) on the front panel or press the VOL+/ VOL-
buttons (15, 16) on the remote control. When the volume
level reaches “0” or “40”, a beep sounds, indicating that the
adjustment limit has been reached. The volume ranges from
“0” to “40”. The TFT screen displays the volume level for 3
seconds.
Stereo
PLII Music
Select Operation
Selecting a Source while Navigating
If "Select" (function 7 or 8) is held down and function 4 is
pressed momentarily, Preset Up will be selected. If "Select"
(function 7 or 8) is held down and function 5 is pressed
momentarily, Preset Down will be selected.
While navigating, other sources may be selected and listened
to such as AM-FM Tuner, CD, etc. To select a source, press
Programmable Turn-On Volume
the /SRC button (6) and then select a source from the Front
Source Menu. Navigation voice prompts will be heard
automatically, although the navigation map cannot be seen.
(The selected source audio will be muted until the navigation
voice prompt command is completed, after which the source
audio will resume.)
This feature allows the user to select a turn-on volume setting
regardless of the volume setting prior to turning the unit off.
To program a specific turn-on volume level, turn the AUDIO
control (2) to adjust the volume to the desired turn-on volume.
Push and hold the AUDIO button while the yellow speaker
icon and level indication is displayed on the screen. The unit
will beep two times to confirm your turn-on volume setting.
Playing Source Selection
Press the SRC button on the front panel (6) or remote control
(8) to change between available playing sources in the
following order: RADIO, SAT, DISC, NAV, BT, iPod, SD, USB,
AUX1, AUX2 and CAMERA. The playing mode is displayed
on the TFT screen.
Source Menu
To access the SOURCE MENU, touch the TFT screen in the
top left corner of the screen.
Auxiliary Devices
Mute
External peripheral devices can be connected to this unit via
RCA output (AUX IN 2) or the MediaLink4.
Press the MUTE button on the front panel (8) or remote
control (3) to mute the volume from the unit. Press the MUTE
button again to restore the volume. “MUTE” is displayed on
the screen. Adjusting the volume or using any of the audio
setup features cancels the mute function.
DISC
SOURCE MENU
iPod Connector
(GEN 5 Recommended)
MediaLink
USB Connector (Type A)
F
Line Mute
If the “MUTE” wire is connected, audio output mutes when a
telephone call is received by a cell phone.
DISC
RADIO
AUX 1
SD
SAT
USB
iPod
NAV
BT
R
O
N
T
3.5mm - Audio
VIDEO
LEFT
RIGHT
RCA Inputs (AUX 1)
R
E
A
R
Steering Wheel Control (SWC)
The VM9022HD is compatible with the PAC (Pacific
Accessory Corporation) steering wheel control adapter SWI-
PS. A 3.5mm female connector (labeled “SWC Interface”) on
the back of the head unit allows connectivity to the PAC
3.5mm Left & Right
Stereo Inputs (AUX 1)
OFF
AUX 2
CAMERA
Select “AUX1” to play an auxiliary device connected via the
MediaLink RCA or 3.5mm inputs. For example, you can play
14
VM9022HD
This menu allows you to select a source for the front or rear
zone. Touch FRONT or REAR to choose the zone for which
you would like to specify the source. (See “Multi-ZONE
Operation” on page 16.)
Table 3: Audio Adjustments
Adjustment Options
•
PIP: Touch to view the Rear Zone, current Front Zone,
or NAV screen. Use the left/right arrows below the PIP
image to change the PIP source.
Function
EQ
User
In user mode, you can manually adjust
each of the seven frequency bands.
PIP: DISC
Audio Control Menu
Acoustic
Urban
Rave
Use the on-screen arrows to select a
predefined equalization curve.
01:02 AM
(Root)
DISC
MP3 4/84
00:00:23
The Audio Control menu features a 7-band graphic equalizer,
which allows you to easily adjust your audio system to meet
the acoustical characteristics of your vehicle, which vary
depending on the type of vehicle and its measurements.
Proper setting of the Fader and Balance boosts the effects of
the cabin equalizer.
E
Q
1
2
3
4
5
6
Cherry Poppin Da
Chris Isaak - Baby
Crazy Town - Butt
Phish - Birds Of A
Phish - Bouncin' R
Phish - Freebird (L
R
E
A
R
Latin
P
I
P
Dance
Hip Hop
Rock
1/2
Press the AUDIO button (5) on the front panel to display the
audio menu.
FAD-BAL
Use this screen to adjust the output level for each
speaker in your surround system from 0 to -24dB.
You can also adjust the master volume from this
screen.
System Reset
To correct a system halt or other
illegal operation, use the tip of a pen
to press the reset button (12) located
[RESET] Button
FAD-BAL
EQ
BACK
USER
NOTE: The EQ mode will automatically change to
“USER” when individual EQ bands are adjusted.
on the front bottom-right corner of the unit. After a system
reset, the unit restores all factory default settings.
+12 —
E
Q
0 —
R
E
A
Proper setting of the Fader and Balance complement the
effects of the cabin equalizer.
NOTE: If the unit is reset while a DVD is playing, the DVD
resumes play once the reset is complete.
R
–12 —
The Audio menu will automatically exit after a few seconds of
inactivity. To exit quickly, touch the top left corner of the
screen or press and hold the AUDIO button (5).
P
I
P
80
User
250
600
1k
4k
10k
16k
EQ:
Alternate Display Options
A menu located on the left side of the screen provides
immediate access to the Equalizer, Rear Zone screen view
and PIP (Picture in Picture) features.
To adjust an audio feature:
1. Use the left/right joystick buttons to highlight the audio
feature to be adjusted.
2. Press the joystick Enter button on the control panel (13)
or remote control (18) to select the highlighted option.
3. Use the joystick to adjust the selected feature to the
desired setting.
•
•
EQ: Touch to view Spectrum Analyzer > Equalizer.
REAR: Touch to view the Rear Zone screen. Control
options appear below the PIP image, depending on the
source.
DISC
AM/FM RADIO
BAND
AS
SATELLITE
CAT–
CH–
CH+
CAT+
15
VM9022HD
MULTI-ZONE OPERATION
Independent sources can be played simultaneously on the
VM9022HD. For example, a video game console can be
seen on the front screen while DVD video is available to rear
passengers.
You can also connect a wireless headphone system to one of
your rear monitors, as illustrated below.
This menu allows you to select a source for the front or rear
zone. Touch FRONT or REAR to choose the zone for which
you would like to specify the source.
Rear Video Screen
(Sold Separately)
Controlling the Rear Zone Screen(s)
If you have a rear touch screen installed, you can touch the
Multi-Zone Limitations
screen to control most rear zone functions.
DVD and SD Card sources cannot be selected
for simultaneous Front / Rear operation. For
example, if DVD is selected as the Rear Zone
source, then SD Card cannot be selected as a
Front Zone source. In addition, HD Radio and
SAT cannot be selected for simultaneous
Front / Rear operation.
YELLOW
You can also use the remote control. The VM9022HD remote
controls both the front and rear zones. To switch from front to
rear zone, move the F/R switch (32) located on the right side
of the remote controller.
VIDEO OUT 1
MZ7-TFT Touch Screen
(Sold Separately)
YELLOW
VIDEO OUT 2
BLACK
Table 4: Multi-Zone Source Options
MZ7-TFT
WHITE
FRONT
ZONE
REAR ZONE
HD
Disc
O
SD
O
USB
O
NAV
O
SAT
iPod
BT
X
Aux 1 Aux 2 Cam
RED
Radio
HD
Radio
O
X
O
O
O
O
Disc
SD
O
O
O
O
X
O
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
X
X
X
X
X
O
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
NOTE: You cannot change or control the front zone
source from the rear zone video screen.
O
O
O
O
O
O
O
O
O
USB
NAV
SAT
iPod
BT
O
O
O
O
O
O
O
O
Touch the REAR button on the left side of the screen to view
a “Picture in Picture” image of the rear screen.
O
O
O
O
O
Wireless Headphone
(OPTIONAL)
Aux 1
Aux 2
Cam
Turning the Rear Screen Off
Touch the OFF button (on the SOURCE MENU) to suspend
operation of the rear screen. Any operation assigned
exclusively to the rear source will be suspended until
reactivated using either the front or rear zone touch screen or
the remote control.
Changing the Rear Zone Source
To access the SOURCE MENU, touch the TFT screen in the
Connecting the Rear Zone Touch
Screen
top left corner of the screen.
You can connect up to two additional monitors (sold
separately) for rear passengers, one of which can be a Touch
Screen.
DISC
SOURCE MENU
F
DISC
RADIO
AUX 1
SD
SAT
USB
iPod
NAV
BT
R
O
N
T
R
E
A
R
OFF
AUX 2
CAMERA
16
VM9022HD
SETUP MENU
To access system settings, press the SETUP button (31) on
Audio Sub-menu Features
Setting
Options
Function
the remote control or touch the
enter the “SETUP” menu. The “GENERAL” sub-menu
appears highlighted in blue.
button on the screen to
Setting
Options
Function
Clock Adjust
(HH:MM)
The clock appears in the top right
corner of the screen and on the TFT
screen during certain operations.
NOTE: The AM/PM indication will
change as you continue to adjust
the hour past 12.
DRC
Off
Employ the Dynamic Range Control
for better playback for low volumes.
On
Audio Mode
Pro Logic II
Surround
Stereo
Choose Stereo to send the same
signal to the front and rear left/right
speakers. If you have a center
speaker, you can choose the Sur-
round option when supported by
your media.
02:40 AM
Video Input
(Input cir-
cuitry autode-
tects the
video signal
from the Aux
In source).
NTSC
PAL
The color signals are output in the
standard NTSC format.
RADIO
SETUP
The color signals are output in the
standard PAL format.
General
Language
Audio
Speaker Bluetooth Back
Auto
The color signal output is switched
automatically based on the current
video input signal - NTSC or PAL.
Music
Movie
Matrix
Optimized for music reproduction
when playing music encoded in
Dolby.
RDS
Rating
Demo
Clock Mode
12 Hour
04 : 31 AM
AUTO
Beep
On
Off
When turned on, an audible beep
tone confirms each function selec-
tion.
Optimized for video reproduction
when playing movies encoded in
Dolby.
Clock Adjust
Video Input
Beep
Hardware
P.VOL
No beep sounds.
Use with Dolby Matrix encoded
media.
On
TS Cal
Sub. W Filter 50Hz
Selecting a crossover frequency
sets a cut-off frequency of the sub-
woofer's LPF (low-pass filter).
Language Sub-menu Features
80Hz
If a DVD supports more than 1 Subtitle or Audio language, all
the languages are available for selection during playback. If
the selected language is not supported by the DVD, then the
default language is used.
100Hz
120Hz
150Hz
Accessing Menu Items
Touch the sub-menu name or use the joystick to select a sub-
menu (Language, Audio, RDS, etc.).
The features available for adjustment under the highlighted
sub-menu option will appear in the center of the screen.
Setting
Options
Function
Speaker Sub-menu Features
OSD
English
On Screen Display appears in
English.
•
Choose 4 CH, 4.1 CH or 5.1 CH depending on the
speaker configuration in your vehicle.
Adjusting a Feature
1. Use the touchscreen or press the /\ or V buttons on the
DVD Audio
English
Spanish
French
English
Spanish
French
Off
DVD Audio is heard in English
when the option is available.
•
Use the Test Tone feature to verify speaker settings.
Make changes using the EQ/FAD-BAL menu, accessed
by pressing and holding the AUDIO button (volume
control).
joystick to select the feature to be adjusted.
DVD Audio is heard in Spanish
when the option is available.
2. Enter the option field for the feature you want to adjust
by using the touchscreen or pressing the Enter
(joystick) button. A submenu appears in a second row
with the selected option highlighted in blue.
3. Select a new value by using the touchscreen or pressing
the /\ or V buttons on the joystick.
DVD Audio is heard in French when
the option is available.
•
•
Subwoofer Phase Adjustment: Touch the sub.w icon to
access the subwoofer polarity controls and reverse the
subwoofer signal polarity from 0° to 180°. Reversing
polarity can improve bass response related to speaker
configuration.
DVD Subtitle
DVD subtitles automatically appear
in English when available.
DVD subtitles automatically appear
in Spanish when available.
4. Use the touchscreen or press the Enter (joystick) button
to confirm setup.
Delay Setting: Delay is available when the media is
Dolby Digital encoded or digital bitstream.
DVD subtitles automatically appear
in French when available.
General Sub-menu Features
•
•
RL and RR only are available in 4.0 and 4.1 mode
Touch the RL, RR and Cent speaker icons to access
the delay setting
DVD subtitles do not appear auto-
matically.
Setting
Options
Function
Disc Menu
English
Spanish
French
DVD menu (if applicable) is dis-
played in English.
Clock Mode
12 Hour
Clock displays 12 hour time using
AM and PM.
•
•
L and R Rear channels: 0 - 15 msec
Center channel: 0 - 5 msec
DVD menu (if applicable) is dis-
played in Spanish.
24 Hour
Clock displays 24 hour time up to
23:59.
DVD menu (if applicable) is dis-
played in French.
17
VM9022HD
Bluetooth Sub-menu Features
Setting
Options
Function
Setting
Options
Function
Setting
Options
Function
Rating
1. Kid Safe
2. G
Select the appropriate rating level
for the intended audience.
Camera
Normal
Mirror
Reverse the camera image as if
looking through a rear-view mirror.
Bluetooth
On
Enable Bluetooth function.
Disable Bluetooth function.
You may override higher ratings by
using your password.
3. PG
Off
On
TFT Set
Open
Auto
The TFT panel automatically
retracts when turned off and
resumes its previous angle when
the unit is turned back on.
4. PG-13
5. PG-R
6. R
Auto Answer
Connect
The unit automatically answers all
incoming calls.
Off
Manually answer calls by touching
the “call” button.
Manual
Off
The TFT panel maintains its angle
adjustment setting when the radio is
turned on/off.
7. NC-17
8. Adult
Manual
Connect the last active mobile
phone by touching the CONNECT
icon when disconnected.
The TFT panel automatically
Load Factory Reset
Select “Reset” to restore the factory
default settings for the Rating sys-
tem only.
retracts when turned off and DOES
NOT resume its previous angle
when the unit is turned back on.
Auto
Automatically connect when your
paired phone is in range.
Pairing Code
The default code is “1234”. Touch
the keypad icon to open the keypad
and enter the pairing code or pass
key required for Bluetooth connec-
tion to your mobile phone. Not all
phones/devices require a pairing
code. The default code is “0000” for
many models.
To reset the password, access the “RATING” menu and enter
the current password. Once the correct password is entered,
you can access the “Password” field and enter a new one.
If the monitor is in display mode, the monitor automatically
switches to CAMERA mode upon reverse driving. When the
reverse driving stops, the monitor return to its original input
mode.
NOTE: Record the password and keep it in a safe place
for future reference. The rating for each disc is marked
on the disc, disc packing, or documentation. If the rating
is not available on the disc, the parental lock feature is
unavailable. Some discs restrict only portions of the disc
and the appropriate content will play. For details, please
refer to the disc description.
P.VOL Sub-menu Features
Tuner Region Sub-menu Features
Setting
Options
Function
Source
DISC
RADIO
SD
Choose a source for which you
would like to increase the relative
volume (LEVEL).
Setting
Options
Function
Tuner
Region
Region 1
FM Band: 87.6MHz -
107.9MHz, channel separation
@ 100kHz
Use the +/- buttons to increase or
decrease the relative volume for the
specified source up to 6 decibels.
Demo Sub-Menu Features
UK
SAT
Europe
Russia
Africa
You can stop/run demonstration mode or turn Demo Auto
Run on/off by chooing the “Demo” option from the SETUP
MENU.
AUX 1
USB
BT
AM Band: 531kHz - 1602kHz,
channel separation @ 9kHz
Region 2
FM Band: 87.9MHz -
107.9MHz, channel separation
@ 200kHz
When "Demo Auto Run" is Off, you can select "Demo Mode >
Run" to start Demo Mode. Demo Mode scrolls through the
various source screens, simulating activity on the display.
“Demo Mode” is discreetly displayed in yellow text (below the
clock), to indicate the unit is in Demo Mode. To stop Demo
Mode, press the upper-left quadrant of the TFT (Source
select).
AUX 2
iPod
NAV
USA
Canada
Mexico
South
AM Band: 530kHz - 1710kHz,
channel separation @ 10kHz
America
TS Cal (Screen Calibration)
To access the “Screen Calibration” function from the SETUP
menu, select the “TS CAL” option.
Rating Sub-menu Features
When “Demo Auto Run” is On, the unit will automatically
display Demo Mode when powered on.
The DVD system has a built-in parental lock feature to
prevent unauthorized persons from viewing restricted disc
content. By default, the rating system is set at the highest
setting (with no restrictions). The parental lock is released
only by entering the correct password. Once the password is
entered, rating is available for setup.
After entering calibration mode, a crosshair
appears in a corner
Hardware Sub-menu Features
quadrant of the screen. To begin calibration, press and hold the
crosshair for one second until it moves to the next quadrant.
Continue for each quadrant until the calibration is completed.
If the rear-view video camera is connected, the unit is on, and
the TFT monitor is retracted inside the unit, the TFT monitor
automatically moves into the viewing position and Camera
mode is selected upon shifting into REVERSE gear. When
shifting into DRIVE gear, the TFT monitor is retracted back
inside unit after ten seconds.
To exit without performing calibration, touch the BACK
button.
Setting
Options
Function
Exiting the System Setup Menu
To exit setup mode and resume normal playback, press the
SETUP button (31) on the remote control or touch the BACK
button on the screen.
Password
_ _ _ _ _ _
Enter the default six-digit password
(012345).
18
VM9022HD
TUNER OPERATION
6. Preset radio stations: Touch to recall preset stations
7. Program Information:Title, Artist, Type
NOTE: The amount of information displayed when
receiving an HD Radio signal is dependent upon what is
being broadcast. Some stations broadcast their call
letters (name), the artist's name, song title, and category
of music.
8. Touch for quick access to Equalizer level settings
9. Touch to access the direct entry screen
10. HD Radio band indicator
About HD Radio™ Technology
Selecting a Tuning Mode
Touch the A/D button (21) to choose from the following
modes:
HD Radio technology allows CD-quality digital broadcasting
of your local AM and FM radio stations. HD Radio broadcasts
can include multiple channels on the same frequency, which
is called multicasting. With multicasting, you can receive up
to eight additional multicast channels: HD1~HD8. With your
VM9022HD radio, you will receive HD Radio digital
broadcasts automatically when tuned to a station that offers
HD Radio technology.
•
•
•
Auto: Search for both digital and analog stations.
Analog: Search and broadcast only analog channels.
Digital: Search and broadcast only digital stations.
Tuning
Not all FM or AM stations offer HD Radio (digital)
broadcasting. You can receive both analog and digital
stations with the VM9022HD.
11. |<<: Touch to seek backward
12. >>|: Touch to seek forward
13. <<: Touch to tune backward one step, including
multicast channels
Tuner TFT Display
Seek Tuning
4
23
8
1
2
5
10
16
3
To seek the next station:
14. >>: Touch to tune forward one step, including multicast
channels
15. BAND: Touch to change between AM/FM bands
16. Touch to view the SOURCE MENU and select a new
playback source
17. MEM: View screen used to enter current channel into
preset memory
18. 1/2 or 2/2: Touch this page button to view a second page
of on-screen buttons.
•
•
•
Touch the >>| button on screen (13).
Press the >>| button (19) on remote control.
Press the > button on the joystick (14).
01:02 PM
FM
WJHM-FM
101.9 MHz HD-1
RADIO
Auto
HD
To seek the previous station:
E
Q
•
•
•
Touch the |<< button on screen (12).
Press the |<< button (17) on the remote control.
Press the < button on the joystick (10).
P1
P2
P3
P4
P5
P6
87.5
MHz
MHz
MHz
MHz
MHz
MHz
90.1
98.1
Manual Tuning
106.1
107.9
102.9
MEM
To increase or decrease the tuning frequency one step:
NOTE: In AM mode, there is only one page of on-screen
button options. The PROG button is not visible since
Multicast channels are not available for AM stations.
•
•
Touch the or buttons on screen.
Press the >> or << buttons (14, 22) on the remote
control.
BAND
1/2
AS
Info: Sheryl Crow
19.
: Touch to view the SETUP menu
•
Press the /\ or V buttons (11, 15) on the joystick.
20. PROG: Touch to view the HD Radio Multicast channel
6
display
7
Direct Tuning
21. A/D: Touch to select Auto, Analog or Digital tuning
mode.
22. HD Radio station indicator
23. Auto memory scan
To enter a radio station directly, touch the
press the GOTO button (21) on the remote control to display
the direct entry menu.
button or
9
19
14
12
Switching to HD Radio Reception
11
13
MEM
MEM
•
Touch the top left corner of the screen (the RADIO
circle) to view the SOURCE MENU. Touch “RADIO”.
Press the SRC button (6) on the front panel or remote
control (8) to switch to the AM/FM or RADIO source.
FM: _ _ _ . _ MHz
17
1
4
7
0
2
5
8
3
6
9
•
BAND
15
1/2
18
AS
23
PROG
20
2/2
A/D
Exit
Selecting the FM/AM Band
Touch the BAND button (15) on the screen, or press the
BAND button on the unit (4) or remote control (20) to select
the AM or FM band.
21
Clear
1. Current radio band indicator
2. Radio frequency indicator
3. Clock
4. Radio station name (call letters)
5. Tuning mode indicator
NOTE: The BAND button on the unit only works when the
TFT is closed.
Enter the desired radio station using the on-screen number
pad. Press Enter to tune to the selected station. To exit the
19
VM9022HD
screen without changing the station, touch Exit. To clear your
entry and start over, touch Clear.
If the PTY menu is not displayed, press the PROG button
(20) on page 2/2 to toggle between HD Radio multicast
channels and PTY categories.
Auto Store (AS)
To select six strong stations and store them in the current
band:
HD Radio Multicast Channels
When a PTY category is selected from the touch screen
menu, the radio will start scanning for stations broadcasting
in the selected category.
To tune to an HD Radio multicast channel, tune to the main
signal and then press the PROG button (20) on page 2/2 . If a
Multicast channel is being broadcast for the current station,
the corresponding multicasting number appears on the left
side of the screen. To view the title and artist, if available,
select HD-1, HD-2, HD3, etc.
1. Select a band (if needed).
2. Press the AS button on the control panel (3) or on page
1/2 of the on-screen controls to activate the Auto Store
function.
Using Preset Stations
Six numbered preset buttons store and recall stations for
each band. All six stored stations (P1-P6) for the current
band appear on the screen.
The new stations replace stations already stored in that band.
02:27 AM
Storing a Station
FM 106.7 MHz HD-2
Auto HD
WXXL-FM
RADIO
1. Select a band (if needed), then select a station.
2. Touch the on-screen MEM button (17), on page 2/2 of
the onscreen options, to open the preset screen.
E
Q
HD-1
HD-2
HD-3
Preset: _ _
MEM
2/2
1
4
7
0
2
5
8
3
6
9
Exit
PROG
A/D
Title: Lil Love
Clear
NOTE: The amount of information displayed when
receiving an HD Radio signal is dependent upon what is
being broadcast. Some stations broadcast their call
letters (name), the artist's name, song title, and category
of music.
3. Touch the preset number in which you would like to
store the current station (or press EXIT to cancel and
close the menu). The preset number and station
appears highlighted.
PTY Search
After tuning to an HD Radio channel, the Program Type
categories are listed, allowing listeners to find similar
programming by genre.
NOTE: Multicast stations can be stored as preset
stations.
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button (6) to select the
corresponding stored station.
02:07 AM
FM 106.7 MHz HD-1
Auto HD
WXXL-FM
RADIO
E
Q
01 Non-specific
02 News
P1
P2
P3
P4
P5
P6
87.5 MHz
90.1 MHz
98.1 MHz
106.1 MHz
107.9 MHz
102.9 MHz
03 Information
04 Sports
05 Talk
MEM
06 Rock
PROG
2/2
A/D
Title: DAWSON McALLIST
20
VM9022HD
SATELLITE RADIO OPERATION
19. MEM: View screen used to enter current channel into
Direct Tuning
Listeners can subscribe to XM® Radio on the Web by
Customers should have their Radio ID ready (see
“Displaying the Identification (ID) Code”). Customers can
receive a limited number of free-to-air channels without
activation.
preset memory
20. DIAG: This feature is reserved for use by service
professionals for troubleshooting.
To enter a radio station directly, touch the
press the GOTO button (21) on the remote control to display
the direct entry menu.
button or
Displaying the Identification (ID)
Code
Before you listen to satellite radio, you must subscribe to the
service using your radio’s identification number. To display
the radio ID, press the left/right buttons (16, 17) on the
joystick or the CH - or CH + buttons on the touch screen
repeatedly to tune to channel “000”. The screen displays the
radio ID where the channel name is usually displayed.
CH NO: _ _ _ /255
Accessing Satellite Radio Mode
Press the SRC button (8) on the front panel or remote control
(8) to switch to the SAT source.
1
4
7
0
2
5
8
3
6
9
Exit
1
3
2
7
8
4
18
Selecting a Station
Use the left/right joystick buttons or the CH - or CH + buttons
01:02
SAT1
XM Preview
CH001
Clear
SAT
Preview
on the touch screen to change to another station.
17
14
12
E
Q
P1
P2
P3
P4
P5
P6
XM Preview
XM Preview
XM Preview
XM Preview
XM Preview
XM Preview
Preset Mode
Enter the desired radio station using the on-screen number
pad. Touch the Enter button to tune to the selected station.
To exit the screen without changing the station, touch Exit. To
clear your entry and start over, touch Clear.
R
E
A
+
To enter preset mode, touch the BAND button on the screen,
or press the BAND button on the unit (14) or remote control
(20) to change between the following bands: SAT1, SAT2, or
SAT3 (indicated in the top left corner of the TFT screen).
CAT
R
CH
-
CH
+
11
CG
P
I
P
CAT
-
15
13
Channel/Category Guide Mode
Six numbered preset buttons store and recall stations for
each band. All six stored stations (P1-P6) for the current
band appear on the TFT screen.
BAND MEM
DIAG
There are two search modes to help navigate through
channels and or categories. To access the Channel/Category
Guide mode, press the Enter (joystick) button (18) on the
remote control or the CG button on the touch screen.
Title: Fridays XM144!
5
6
9
10
16
19
20
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch the on-screen MEM button (18) to open the
preset screen.
Channel Guide is the default search mode. To access
Category Guide, press the TITLE button (2) on the remote
control or touch CAT on the touch screen. To return to
Channel Guide, touch CH on the screen or press the
SUBTITLE button (9) on the remote control.
1. SAT channel name
2. SAT channel number
3. SAT band
Mem:
4. Time
5. Song title
6. Artist name
7. Song category
8. Signal strength indicator
9. Current preset channels/on-screen preset buttons
10. CH -: Select the previous channel
Channel Guide Mode
P1 P2
P3
P6
When Channel Guide mode is selected, the first six satellite
channels are displayed in the boxes in the bottom left of the
TFT screen and the on-screen menu changes to facilitate
search mode.
P4 P5
E x i t
11. CH +: Select the next channel
12. CAT +: Select next channel in current category only
3. Touch the preset number in which you would like to
store the current station (or press EXIT to cancel and
close the menu). The preset number and station
appears highlighted.
13. CAT -: Select previous channel in current category only
14. Touch to enter channel directly using keypad on screen
15. CG: Access Channel/Category Guide mode
16. BAND: Change between SAT1, SAT2 and SAT3 bands
17. Touch to view the SETUP menu
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button to select the
corresponding stored station.
18. Touch this area to view the SOURCE MENU and select
a new playback source
21
VM9022HD
01:02
SAT1
XM Preview
CH001
Preview
SAT
E
Q
########
R
E
A
001 XM Preview
004 The 40s
005 The 50s
006 The 60s
007 The 70s
R
CH
P
I
P
CG
CAT
SCN
MEM
DIAG
•
•
While in Search Mode, to switch between Channel and
Category search modes, press the CH or CAT buttons
on the touch screen.
Use the scroll bar and arrows on the touch screen to
view the next/previous page of stations. Each page
contains six channels to select from.
•
•
•
Press the on-screen SCN button to preview each of the
6 channels displayed for 10 seconds.
Press the CG button to return to the Preset Mode
screen.
To select a channel while in Channel Guide mode, touch
the channel name on the screen. The channel will begin
playing and the unit will return to the Preset Mode.
Category Guide Mode
When Category Mode is selected, folder icons appear on the
screen next to category choices.
•
•
•
•
•
While in Search Mode, to switch between Channel and
Category search modes, press the CH or CAT buttons
on the touch screen.
Use the scroll bar and arrows on the touch screen to
view the next/previous page of categories. Each page
contains six categories to select from.
To select a category, touch the corresponding category
name or folder icon. The channels in that category will
be displayed on the screen.
Use the scroll bar and arrows on the touch screen to
view the next/previous six stations in the selected
category.
Touch the on-screen SCN button to preview each
channel in the selected category for 10 seconds.
Touch the channel name to play that channel.
Touch the on-screen CG button to return to the Preset
Mode screen.
•
•
22
VM9022HD
DVD/VCD VIDEO OPERATION
Repeat Playback
Controlling Playback
NOTE: When properly installed, DVD video cannot be
displayed on the main TFT screen unless the parking
brake is applied. If you attempt to play a DVD while the
vehicle is moving, the TFT screen displays “PARKING”
with a blue background. Rear video screens, if
applicable, will operate normally.
Press the RPT button (19) on the control panel, the RPT
To access the on-screen controls, touch the screen. Touch
the 1/2 button to view a second page of controls
button (7) on the remote control, or the
button on screen
to alter repeat mode according to the following:
•
•
DVD: Repeat Chapter, Repeat Title, Repeat Off
VCD (PBC Off): Repeat Single, Repeat Off
BACK
EQ
REAR
PIP
Inserting a Disc
AUDIO
NOTE: For VCD play, the repeat function is not available
if PBC is on.
To insert a disc, you must first press the OPEN button (1) on
the control panel or the OPEN/CLOSE button on the remote
control to reveal the disc slot (22). Insert a disc, label side up,
into the disc slot. The front panel will close automatically and
disc play begins.
A-B
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to
repeat.
SUBTITLE
•
Press the RPT A-B button (6) on the remote control (or
the A-B button on screen) to set the start point (A) of the
repeated section.
Press the RPT A-B button again once you reach the
desired end point (B) of the repeated section. The
selected portion of the DVD will now repeat
continuously.
NOTE: If Parental Lock (Rating) is activated and the disc
inserted is not authorized, the 6-digit code must be
entered and/or the disc must be authorized (see “General
Sub-menu Features” on page 17).
MENU
TITLE
DISP
1/2
2/2
•
Stopping Playback
Touch the stop button ( ) on the screen or press the
BAND button (20) on the remote control to stop DVD play.
You cannot insert a disc if there is already a disc in the unit or
if the power is off.
/
•
Press the RPT A-B button again to cancel the A-B
section setting and stop repeat play.
Pausing Playback
NOTE: DVD-R and DVD-RW will not play unless the
recording session is finalized and the DVD is closed.
Touch the pause button (||) on the screen (or press the >/||
button on the remote control) to suspend disc playback.
Press the > button on the screen to resume disc playback.
Random Playback
With a DVD, VCD, or CD playing, press the RDM button on
the control panel (21) or remote control (33) to activate
random playback and play all chapters/tracks in random
order. “On” appears on the screen.
Ejecting a Disc
Fast Forward Playback
To eject a disc, you must first press the OPEN button (1) on
the control panel or the OPEN/CLOSE button on the remote
control to reveal the disc slot (22). Press the button (21) on
the unit or remote control (35) to eject the disc. The unit
automatically reverts to Tuner mode. You may eject a disc
with the unit powered off. The unit will remain off after the
disc is ejected.
Press the /\ button on the joystick or the >> button on the
screen to fast forward. Keep pressing and releasing the
button to increase the rate from “2X” to “4X”, “6X”, and “8X”.
Press the > button on the joystick to play the next random
track.
Press the joystick Enter button (18) on the remote control or
touch the play button (>) to resume normal playback.
Press the RDM button again to turn random play off.
Fast Reverse Playback
NOTE: When a VCD is playing with PBC turned “On”,
activating random playback automatically turns PBC off.
Press the \/ joystick button or touch the << button on the
screen to play the current title in fast reverse. Keep pressing
and releasing the button to increase the rate from “2X” to
“4X”, “6X”, and “8X”.
Reset the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism
operation occurs, press and hold the button (21) on the
unit or remote control (35) to reset the loading mechanism.
Normal operation resumes.
Picture in Picture (PIP)
Press the PIP button (30) on the remote control to view a
Picture in Picture image of the Front source, Rear Zone or
NAV screen. Use the left/right arrows at the bottom of the
image to change the PIP source.
Press the joystick Enter button (18) on the remote control or
touch the play button (>) to resume normal playback.
Slow Forward/Slow Reverse Playback
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted,
press the SRC button (15) on the front panel or remote
control (8) until “DISC” appears at the bottom of the screen.
Press the ||>/BAND button on the remote control to slow
forward/slow reverse. Keep pressing and releasing the button
to increase the slow forward rate from “2X” to “4X” and “8X”
and then begin slow reverse.
Accessing the DVD Menu
Press the MENU button (1) on the remote control to recall the
main DVD menu. Use the joystick to select a title from the
menu or touch the title on screen.
23
VM9022HD
Press the TITLE button (2) on the remote control or on
screen to select a different title for playback.
Enter the desired title, chapter/track, or time using the on-
screen number pad and then press the Enter (arrow) button.
To exit the screen without making a selection, touch Exit. To
clear your entry and start over, touch Clear.
Playback Information
During DVD and VCD playback, press the DISP button on the
control panel (2) or remote control (10) to display playback
information on the screen, including the media playing and
current playback time.
Press the Enter (joystick) button to confirm your selection
and begin playback. You can also select a title using the
touch screen.
Viewing an Alternate Picture Angle
(DVD Only)
DVD Playback Information
Moving Through Chapters
Press the > button on the joystick or the >>| button on screen
to advance to the next chapter on the DVD.
The following information is displayed at the top of the screen
during DVD playback:
Some DVDs contain scenes that have been shot
simultaneously from different angles. For discs recorded with
multiple angles, press the ANGLE button (13) on the remote
control to toggle available angles of the on-screen image.
•
•
•
Title: 05/08 – “05/08" indicates the fifth of 8 titles on the
DVD is currently playing.
Chapter: 012/016 – “002/016" indicates that the second
of 16 titles on the DVD is currently playing.
00:41:28 – “00:41:28” indicates the playback time of the
current title.
Press the < button on the joystick or the |<< button on screen
to move to the previous chapter.
Zooming
Direct Chapter / Track Selection
Remote Control Direct Entry
Press the PRESET /\ and \/ buttons (11, 12) on the remote
control to enlarge and pan through the video image using the
following options: “ZOOM 1.5”, “ZOOM 2”, “ZOOM 3”, and
“OFF”.
During DVD, VCD and CD playback, you can use the
numeric keypad on the remote control (29) to access a track
directly.
The following information is displayed at the bottom of the
screen:
•
•
•
Front: Source
Rear: Source
CLOCK
Multi-Language Discs (DVD Only)
Changing Audio Language
If you are watching a disc recorded in multiple languages,
press the AUDIO button (5) on the remote control to choose
a language.
VCD Playback Information
The following information is displayed at the top of the screen
during VCD playback:
Changing Subtitle Language
•
•
VCD 2.0 – Format of current disc.
Title: 06/18 – “06/18” indicates the sixth of 18 tracks on
the VCD is currently playing.
00:02:18 – “00:02:18” indicates the playback time of the
current track.
If you are watching a disc recorded in multiple languages with
subtitles, press the SUBTITLE button (9) on the remote
control to choose the language in which you would like the
subtitles to appear.
•
Touch Screen Direct Entry
To select a title, chapter/track, or specific playback time
NOTE: During VCD playback, press the AUDIO button (5)
on the remote control to choose between Left Channel,
Right Channel, and Stereo.
directly, touch the
button on screen control to display
the direct entry menu.
PBC (Play Back Control - VCD Only)
For VCDs with play back functionality, play back control
Chapter: _ _
(PBC) provides additional controls for VCD playback.
1
4
7
0
2
5
8
3
6
9
Exit
Press the MENU button (1) on the remote control to toggle
the PBC function “On”/”Off”. Once PBC is on, playback starts
from track 1 of the play list.
NOTE: When PBC is activated, fast forward, slow
playback, and previous/next track are available. Repeat
and direct track selection are not available.
Clear
When PBC is activated, selecting random, scan, or search
playback automatically deactivates PBC.
Use the
button to select Title, Chapter, or Time entry.
Title: _/#
Chapter: _ _/##
Time: _ _:_ _:_ _
•
•
•
24
VM9022HD
General Disc Information
Table 5: Disc Properties
Symb
Max Play
Time
12cm Disc Properties
ol
(MPEG 2
Single side single layer (DVD-5)
Single side double layer (DVD-9)
Double side single layer (DVD-10)
Method)
133 minutes
242 minutes
Double side double layer (DVD-18) 266 minutes
484 minutes
(MPEG 1
Single side single layer (VCD)
Single side single layer
Method)
74 minutes
74 minutes
Table 6: Disc Symbols
Symbol
Meaning
Number of voice languages recorded. The num-
ber inside the icon indicates the number of lan-
guages on the disc (maximum of 8).
Number of subtitle languages available on the
disc (maximum of 32).
Number of angles provided (maximum of 9).
Aspect ratios available. “LB” stands for Letter Box
and “PS” stands for Pan/Scan. In the example on
the left, the 16:9 video can be converted to Letter
Box video.
Indicates the region code where the disc can be
played.
•
•
•
•
Region 1: USA, Canada, East Pacific Ocean
Islands
Region 2: Japan, Western Europe, Northern
Europe, Egypt, South Africa, Middle East
Region 3: Taiwan, Hong Kong, South Korea,
Thailand, Indonesia, South-East Asia
Region 4: Australia, New Zealand, Middle and
South America, South Pacific Ocean Islands/
Oceania
•
Region 5: Russia, Mongolia, India, Middle
Asia, Eastern Europe, North Korea, North
Africa, North-West Asia
•
•
Region 6: Mainland China
ALL: All regions
25
VM9022HD
DVD/CD AUDIO OPERATION
Instructions for TFT control and Insert/Eject are the same for
DVD and CD operation. Please see the DVD/Disc Video
Operation section for information about these topics.
13. Touch to activate/deactivate Repeat play mode
14. Touch to access the direct entry screen
15. Touch to view the SETUP menu
16. Touch to view Spectrum Analyzer > Equalizer
17. Touch to view the SOURCE MENU and select a new
playback source
18. Touch the scroll bar and arrows to view the previous/
next page of songs
19. Touch to access the Music menu
20. Touch to access the Video menu
21. Touch to access the Photo menu
22. Browse all files
Random Play Select
While disc play is stopped, press the RDM button on the
remote control (33) to play the tracks on the disc in a random,
shuffled order. Touch the RDM button again to cancel
Random Play mode.
The VM9022HD will play music or other audio files from the
following disc media/formats:
•
•
•
•
•
CD-DA
CD-R/RW
DVD
DVD+R/RW
DVD-R/RW
NOTE: CD-R and CD-RW will not play unless the
recording session is finalized.
Fast Forward
Upon inserting a disc with the TFT screen open, the disc and
track title (if available), along with the track number and
playing time appear on the screen.
Touch the button on screen or press the /\ button on the
joystick to fast forward. Keep pressing and releasing the
button to increase the rate from “2X” to “4X”, “6X”, and “8X”.
23. DIR -: Touch to view the previous folder
24. DIR +: Touch to view the next folder
25. Current time
Fast Reverse
CD Player User Interface
Touch the button on screen or press the /\ button on the
joystick to fast reverse. Keep pressing and releasing the
button to increase the rate from “2X” to “4X”, “6X”, and “8X”.
The on-screen indicators and touch key areas for CD
playback are outlined below.
Controlling Playback
Stopping Playback
Touch the button on screen or press the button (20) on
the remote control to stop disc playback.
3
16
17
1
2
15 25
01:02
Direct Track Entry
To resume playback, touch the button on screen or press
the joystick button.
To select a track directly, touch the
display the direct entry menu.
button on screen to
TRACK 01
CD 1/10
DISC
01:23
04:31
Pausing Playback
Touch the button on screen or press the joystick button to
suspend or resume disc playback.
E
Q
1
2
3
4
5
6
Track 01
TRACK: _ _ / ##
14
10
Track 02
Track 03
Track 04
Track 05
Track 06
R
E
A
Moving Through Tracks
1
4
7
0
2
5
8
3
6
9
R
Press the >>| button (19) on the remote control or on screen
or use the > button on the joystick to advance to the next
track on the disc.
Exit
8
6
P
I
P
Press the |<< button (17) on the remote control or on screen
or use the < button on the joystick to move to the previous
track.
Clear
4
5
9
18
11
7
13
12
Repeat Playback
Touch the
button on screen, press the RPT button on the
Enter the desired track number using the on-screen number
pad, and then press the Enter (arrow) button. To exit the
screen without making a selection, touch Exit. To clear your
entry and start over, touch Clear.
1. Current track and total number of tracks on disc
2. Elapsed playing time/length of track
3. Current track title
4. Available track titles
5. ID3 information
remote control (7) control panel (19) to alter repeat mode
according to the following:
•
•
•
•
DVD: Repeat Chapter, Repeat Title, Repeat Off
CD-DA: Repeat One, Repeat All, Repeat Off
CD-R/RW: Repeat One, Repeat All, Repeat Off
DVD-R/RW: Repeat One, Repeat All, Repeat Off
6. ||: Touch to pause/play disc playback
7.
: Touch to stop disc playback
Track Scan Select (CD-DA discs only)
8. >>|: Touch to move to next track
9. |<<: Touch to move to previous track
During disc play, press the SCN button on the remote control
(34) or control panel (20) to play the first 10 seconds of each
track. When a desired track is reached, press the SCN button
again to cancel the function and play the selected track.
10.
11.
/>>: Touch to navigate playlist/touch to fast forward
/<<: Touch to navigate playlist/touch to fast rewind or
reverse
12. Touch to activate/deactivate Randon play mode
26
VM9022HD
MP3/WMA OPERATION
Instructions for TFT control and Insert/Eject are the same for
DVD and MP3 operation. Please see the DVD/Disc Video
Operation section for information about these topics.
MP3 Playing Order
Loading an SD Card
When selected for play, files and folders (Folder Search, File
Search or Folder Select) are accessed in the order they were
written by the CD writer. As a result, the order in which they
are expected to be played may not match the order in which
they are actually played. You may be able to set the order in
which MP3/WMA files are to be played by writing them onto a
medium such as a CD-R with their file names beginning with
play sequence numbers such as "01" to "99".
NOTE: The VM9022HD will support up to 4GB SD Cards.
SD Cards larger than this (SDHC Cards) will not be
recognized.
NOTE: When burning MP3 / WMA files onto a DVD
disc, use the 2X or 4X burning option, if available.
This slower burning speed will help eliminate
buffer errors and increase disc reading reliability.
Also, use folders when burning large numbers of
songs / files to a disc for easy music navigation.
Select the "Disc at Once" option and close your
disc.
To Insert an SD card, you must first press the OPEN button
(1) on the control panel or the OPEN/CLOSE button on the
remote control to reveal the SD card slot (21). Insert the SD
card into the card slot and the unit will read the audio media
files on the card automatically.
For example, a medium with the following folder/file hierarchy
is subject to Folder Search, File Search or Folder Select, as
shown below.
MP3/WMA Media and File
Requirements
This player allows you to play back MP3 and WMA files
recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs.
For CD-RW discs, please make sure it is formatted using the
full method and not the quick method to prevent illegal disc
operation.
CARD
Up to 1500 songs/files can be burned onto a disc for a MEGA
DVD music mix. Do not exceed this number of songs/files or
disc readability problems may occur.
To remove the card, first press the SRC button (6) to switch to
another mode and stop SD playback. Grasp the SD card and
pull it straight out. Most cards have a thin recess that helps
with removal.
MP3 Format Compatibility
The file naming formats listed below are compatible with this
unit:
•
•
•
ISO 9660 – file name: 12 characters, file extension: 3
characters
ISO 9660 – file name: 31 characters, file extension: 3
characters
Joliet – 64 characters
Loading a USB Device
NOTE: The USB port will recognize most USB flash
memory devices, as well as portable hard drives with
audio / video files. The hard drive must be formatted to
FAT32. The head unit operating system does not support
NTFS file structure.
If the file or folder name does not conform to ISO 9660 file
system standards, it may not be displayed or played back
correctly. Use the following settings when compressing audio
data for your MP3 disc:
The VM9022HD player will only recognize three folder levels
and does not display folders containing only other folders. In
the example above, the unit will display folders 3, 4, 6, and 8,
but not 2 and 7 since they do not contain any tracks directly.
Folder 5 is not recognized at all since it is at the fourth level.
1. Locate the USB jack located on the MediaLink4.
•
•
Transfer Bit Rate: 128kbps
Sampling Frequency: 48kHz
MediaLink
NOTE: When recording MP3 up to the maximum
disc capacity, disable additional writing. For
recording on an empty disc up to maximum disc
capacity, use the "Disc at once" setting.
3.5mm - Audio
VIDEO
LEFT
RIGHT
Type A USB Connector
2. Insert the USB device into the USB connector. The unit
will read the audio media files on the USB device
automatically.
27
VM9022HD
To remove the USB device, press the SRC button (6) to
switch to another mode and then remove the USB device
from the USB connector.
14. Touch to access the direct entry screen
15. Touch to view the SETUP menu
16. Touch to view Spectrum Analyzer > Equalizer
17. Touch to view the SOURCE MENU and select a new
playback source
18. Folder name
19. 1/2 or 2/2: Touch this page button to view a second page
of on-screen buttons
Repeat Playback
Touch the button on screen, press the RPT button (19) on
the control panel or press the RPT button (7) on the remote
control to alter repeat mode according to the following:
Repeat Single, Folder Repeat, Repeat Off.
MP3 User Interface
The on-screen indicators and touch key areas for MP3
playback are outlined below.
Random Play Select
Press the RDM button (33) on the remote control to play the
files on the disc in a random, shuffled order. Press RDM
again to cancel Random Play mode.
20
14
17
18
1
2
3
20. Touch the scroll bar and arrows to view the previous/
next page of songs
16
21. Touch to activate/deactivate Repeat play mode
22. Touch to access the Music menu
23. Touch to access the Video menu
24. Touch to access the Photo menu
25. Browse all files
01:02 AM
(Root)
DISC
NOTE: CD-R and CD-RW will not play unless the
recording session is finalized.
MP3 4/84
00:00:23
15
E
Q
1
2
3
4
5
6
Cherry Poppin Da
Chris Isaak - Baby
Crazy Town - Butt
Phish - Birds Of A
Phish - Bouncin' R
Phish - Freebird (L
R
E
A
10
Controlling MP3/WMA Disc Playback
Playing MP3/WMA Files
R
8
6
P
I
P
After inserting a MP3/WMA disc, files will play in the
sequence of the “Root’ directory.
1/2
NOTE: When burning MP3 / WMA files onto a DVD
disc, use the 2X or 4X burning option, if available.
This slower burning speed will help eliminate
buffer errors and increase disc reading reliability.
Also, use folders when burning large numbers of
songs / files to a disc for easy music navigation.
Select the "Disc at Once" option and close your
disc.
19
20
4
7
9
11
5
24
22
23
Stopping Playback
ALL
Touch the button on screen or press the /BAND button
(20) on the remote control to stop disc playback.
2/2
DIR +
13
DIR -
12
To resume playback, touch the button on screen, press the
joystick button (13) on the front panel, or press the >/|| button
(18) on the remote control.
25
Pausing Playback
1. Current track and total number of tracks on root of disc
2. Elapsed playing time, track length
3. Current time
Touch the button on screen, press the joystick button (13)
on the front panel, or press the >/|| button (18) on the remote
control to suspend or resume disc playback.
4. Track titles
5. ID3 information
Moving Through Tracks
6. || : Touch to play/pause disc playback
Press the >>| button (19) on the remote control or on screen
or use the > button on the joystick (14) to advance to the next
track on the disc.
7.
: Touch to stop disc playback
8. >>|: Touch to move to next track
9. |<<: Touch to move to previous track
Press the |<< button (17) on the remote control or on screen
or use the < button on the joystick (10) to move to the
previous track.
10.
11.
/>>: Touch to navigate playlist/touch to fast forward
/<<: Touch to navigate playlist/touch to fast rewind or
reverse
12. DIR -: Touch to view the previous folder
13. DIR +: Touch to view the next folder
28
VM9022HD
iPod OPERATION
iPod User Interface
The on-screen indicators and touch key areas for iPod
playback are outlined below.
Controlling Your iPod
The unit will automatically switch to iPod mode when an iPod
is plugged into the MediaLink4. To return to the iPod menu
from any other source menu, press the SRC button (6) on the
front panel or remote control (8) until the iPod menu appears
on the screen.
Touch the
icon on screen or press the SUB-TITLE button
(9) on the remote control to access the iPod PHOTO mode.
The VM9022HD will release control back to the iPod so you
can select video media to be displayed on the TFT monitor.
To exit PHOTO mode, touch the screen.
17
1
2
18
14
3
15
16
(Requires Gen 5.5 or earlier photo or video iPod. iPhone,
iPod Touch, iPod Classic and iPod Nano with video will
only play music files.)
01:02 AM
A Rush of Blood to the Head
1:08 2/124
iPod
NOTE: Be sure your iPod has the latest Apple firmware
installed to avoid connectivity issues.
Video Playback
E
Q
0001 A Rush Of Blood to
0002 40
While iPod video can be viewed on the VM9022HD screen,
you must use the iPod to control video playback options.
The following touch screen icons and remote control buttons
are used to access the iPod menus:
R
E
A
MENU
10
0003 4th of July
Touch the
button on screen or press the ANGLE button
R
0004 A Little Less Conver
0005 A Message
Enter
8
6
(13) on the remote control to access iPod VIDEO mode. The
VM9022HD will release control back to the iPod so you can
select video media to be displayed on the TFT monitor. To
exit VIDEO mode, touch the screen, press the >> button (14)
on the remote control, or press the MENU button on the iPod.
P
I
P
Menu
Touch Screen
Remote Control
0006 A Sort of Homecomi
Music
AUDIO
Artist: Coldplay
Photos
Videos
SUB-TITLE
ANGLE
4
19
12
(Requires Gen 5.5 or earlier photo or video iPod. iPhone,
iPod Touch, iPod Classic and iPod Nano with video will
only play music files.)
9
13
7
5
11
1. Elapsed playing time
2. Current track and total number of files
3. Current time
4. Media titles/menu information
5. ID3 information
6. Enter
Use the touchscreen, the joystick, or the directional keys on
the remote control to navigate the iPod menus.
NOTE: To transmit the video from your iPod to the
VM9022HD screen, you must set the following options
through the iPod video settings menu: TV Out = On, TV
Signal = NTSC, and Widescreen = On.
iPod Music Playback
To access iPod music files, touch the button on screen or
press the AUDIO button (5) on the remote control.
•
•
Touch the > || button on screen to play/pause.
Touch >>| on screen, press the >>| button (19) on the
remote control, or press the > button on the joystick (17)
to move to the next item on the menu.
Touch |<< on screen, press the |<< button (17) on the
remote control, or press the < button on the joystick (16)
to move to the previous item on the menu.
Use the touch screen or press the >/|| button (18) on the
remote control or the joystick Enter button (20) on the
control panel to select the highlighted menu option.
Press the >> button (14) on the remote control or the /\
button (18) on the joystick, or touch the MENU button on
screen to return to the previous menu.
7. Touch to access photos
8. >>|: Touch to move to next track
9. |<<: Touch to move to previous track
10. Touch to access the iPod menu
11. >|| : Touch to play/pause disc playback
12. Touch to access music files
13. Touch to access video files
14. Touch to access the SETUP screen
15. Touch to view Spectrum Analyzer > Equalizer
16. Touch to view the SOURCE MENU and select a new
playback source
NOTE: After disconnecting your iPod, the VM9022HD will
always return to the last mode accessed when the iPod
is plugged back into the unit.
•
•
•
17. Song title
18. Touch to view the direct entry menu
19. Touch the scroll bar and arrows to view the previous/
next page of songs
Fast Forward/Fast Reverse
Press and hold the |<< or >>| buttons on screen or on the
remote control (17, 19) for 1 second and continue to hold for
fast forward or fast reverse. Release to resume normal
playback.
Photo Playback
While iPod photos can be viewed on the VM9022HD screen,
you must use the iPod to control photo playback options.
29
VM9022HD
Direct Track/File Entry
To select a track/file directly, touch the
button on
screen control to display the direct entry menu.
TRACK: _ _ / ##
1
4
7
0
2
5
8
3
6
9
Exit
Clear
Enter the desired track/file using the on-screen number pad.
Press the Enter (arrow) button to tune to the selected station.
To exit the screen without changing the station, touch Exit. To
clear your entry and start over, touch Clear.
You can also use the numeric keypad (29) on the remote
control to access files directly.
30
VM9022HD
BLUETOOTH OPERATION
•
•
•
To ensure the best conversation quality/performance,
stay within one meter of the head unit when talking.
To “disconnect” the mobile phone from the head unit,
turn the Bluetooth connectivity off on the mobile phone.
Phone Book direct searching through the head unit
is only available if the mobile phone supports Phone
Book Download. If the feature is not supported, the
head unit will display “Phone book not provided by this
phone” when an attempt is made to download a phone
book.
1. Current connection status/device connected
2. Current time
3. Bluetooth menu
4. Current operation status
5. Toggle Music/Phone menu
6. Transfer active call back to handset
7. Pair your Bluetooth phone (first time use)
8. Connect/disconnect Bluetooth device (phone, PDA,
personal music player, etc.) with hand-free function
9. Exit call listing display
10. Mute/unmute microphone (located on left side of radio)
during active call
11. Answer incoming call/make call
12. Reject incoming call/end call/quit pairing process/quit
reading phone book or call listing
About Bluetooth
Bluetooth is a short-range wireless radio connectivity
technology that is developed as a cable replacement for
mobile phones, handheld PCs and other devices. Bluetooth
operates in 2.4 GHz frequency range and transmits voice and
data at speeds up to 1 megabit per second. Bluetooth was
launched by a special interest group (SIG) comprised of
Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM in
1998, and it is currently developed by nearly 2,000
companies worldwide. The Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc. and any use of such
marks by Audiovox Corporation is under license. Other
trademarks and trade names are those of their respective
owners.
Bluetooth User Interface
The on-screen indicators and touch key areas for Bluetooth
operation are outlined below.
13. Touch to view the SETUP menu
14. Touch to view Spectrum Analyzer > Equalizer
15. Touch to view the SOURCE MENU and select a new
playback source
16. Indicates connection/current operation (--> indicates
incoming call, <-- indicates dialing alert)
17. Touch to access the direct entry screen
14
15
17
1
24
2
NOTE: The line-of-sight distance between this unit and
your cellular phone must be 8 meters or less for sending
and receiving voice and data via Bluetooth wireless
technology. However, the transmission distance may
become shorter than the estimated distance, depending
on the environment in use.
01:02 AM
BT
Disconnected
E
Q
1
2
3
4
Missed Calls
Received Calls
Dialed Calls
Phone Book
Before attempting to use the Bluetooth functions on the
VM9022HD, please make sure your mobile phone supports
Bluetooth functions (Headset or Handsfree profiles or both).
Adhere to the following guidelines for successful operation.
R
E
A
18.
: Touch to stop playback
MENU
R
19. Touch the scroll bar and arrows to view the previous/
next page of songs
20. Toggle Music/Phone menu/mode
21. Play/Pause selected file
22. |<<: Touch to move to the previous file
23. >>|: Touch to move to the next file
24. Signal strength indicator
P
I
P
•
Before using Bluetooth functions, you must pair your
mobile phone to the VM9022HD head unit (see “Pairing
the Bluetooth System with Your Mobile Phone and Head
Unit”). To ensure the best reception for pairing and
reconnection, please make sure the phone battery is
fully charged before you begin.
Menu List
19
3
4
Hands Free Profile (HFP)
18
13
To use a phone wirelessly with this unit, it is necessary to first
establish a connection using Bluetooth wireless technology.
Connection is normally established using HFP (Hands Free
Profile), which gives you full control of functions available on
the telephone source. However, depending on your phone,
the connection may be made using HSP (Head Set Profile),
making some functions unavailable. This is a limitation of
your phone, not the VM9022HD.
•
•
Try to perform pairing within a few minutes of the phone
being turned on.
Once the unit has been paired with the phone, the unit’s
model number, “VM9022HD”, will be displayed on the
mobile phone.
20
9
7
MENU
MENU
23
21
9
10
•
•
To achieve the best performance, always keep the
mobile phone within 3 meters of the head unit.
Always keep a clear path between the mobile phone
and the head unit. Never place a metal object or any
other obstacle between the mobile phone and the head
unit.
5
Since there are a number of Bluetooth mobile phone
implementations available on the market, operations with
your Bluetooth mobile phone using this unit vary greatly.
11
6
22
8
18
12
8
•
•
Some mobile phones (like Sony Ericsson) may have a
"Power Saving Mode" option. PLEASE DO NOT use the
power saving mode with the VM9022HD.
Before accepting or making a call, make sure your
mobile phone's “Bluetooth function” is turned on.
PHONE INTERFACE
MUSIC INTERFACE
Please refer to the instruction manual that came with your
Bluetooth mobile phone along with this manual while
operating your phone with this unit.
31
VM9022HD
Pairing the Bluetooth System with
Your Mobile Phone and Head Unit
Call Transfer
While talking, to transfer audio from the head unit back to the
To end the conversation, press the
display the call duration for 3 seconds, and then return to the
previous mode.
button. The screen will
mobile phone, touch the button (7). The TFT will display
“Transfer”. You can only transfer a call after it has been
answered.
1. Press the
button (8) to initiate the pairing process.
Rejecting an Incoming Call
Keep the mobile phone within 2 meters of the head unit
when pairing. (To terminate the pairing process, press
Touch the
button to reject an incoming call. The call will
revert to your phone and can be answered directly or left for
voice mail.
the
button again.)
Menu List
The menu list appears on the left side of the screen and can
be accessed from other modes by touching the MENU button
on the right side of the screen.
2. Select the Bluetooth setup option on the mobile phone
to be paired (please refer to the phone’s instruction
manual to learn how to enter Bluetooth setup, turn
Bluetooth on/off, and perform pairing).
Volume Control
To increase or decrease the volume level, turn the rotary
encoder (5) on the front panel or press the VOL+/ VOL-
buttons (15, 16) on the remote control.
NOTE: Not all phones allow access to missed, received
or dialed calls and some will not allow uploading of your
phone’s address book.
NOTE: Some phones require a “pass key” or pairing
code to connect. If your phone requires a pass key or
pairing code, you will need to enter this number in the
Pairing Code field under the Bluetooth SETUP menu. The
default pairing code for many phones is “0000”. The
default code for the VM9022HD is “1234”. See “Bluetooth
Sub-menu Features” on page 18 for instructions on
entering the pairing code.
Microphone Mute
To mute the microphone, touch the
resume microphone functionality.
button. Touch again to
Missed Calls
The Missed Calls list retrieves the list of Missed numbers
from your phone. The last missed number is the first number
on the list. Touch the Missed Calls menu option to view the
list. To make a call from the Missed Calls list, touch the
Making an Outgoing Call
NOTE: Press the
button from the main Bluetooth
3. Select “VM9022HD” from the pairing list on the mobile
phone.
screen to automatically dial the last call received.
number and then touch the
button. The TFT will display
“Cannot get missed record” when the feature is not available.
•
If pairing is successful, the TFT will display the paired
mobile phone model number or name (as specified in
your phone’s Bluetooth Setup menu).
If pairing fails, “Phone Pairing Fail” is displayed at the
bottom of the screen.
1. Touch the
button to open the direct dial screen.
Dialed Calls
The Dialed Calls list retrieves the list of dialed numbers from
your phone. The last dialed number is the first number on the
list. Touch the Dialed Calls menu option to view the list. To
make a call from the Dialed Calls list, touch the number and
•
Reconnecting
Once the Bluetooth device has been paired, you can touch
2
5
8
0
3
6
9
#
Exit
1
4
7
then touch the
button. The TFT will display “Cannot get
dialed record” when the feature is not available.
the connect
button to reconnect.
Clear
Received Calls
Use the Received Calls list to view the last 10 received
numbers stored on your phone. To access the Received list,
touch the Received Calls menu option. The last received
number is the first number on the list. To make a call from the
NOTE: You can only connect to a phone using the
buttons on the on-screen Phone interface.
Each time the
button is pressed, the head unit will
*
Received Calls list, touch the number and then touch the
button. The TFT will display “Cannot get received record”
when the feature is not available.
automatically reconnect with the mobile phone once (only if
the mobile phone was previously paired with the head unit).
2. Use the 0-9, *, and # buttons to input the phone number.
•
•
Touch the CLEAR button to clear the last digit.
Touch the
start over.
Managing Incoming Calls
Phone Book
button to clear the entire number and
1. Touch the Phone Book menu option to display the
phone book stored on your mobile phone, if compatible.
The screen will display “Ready...” while the phone book
is downloading.
2. Once the download is completed, you can use the arrow
buttons and scroll bar on the right side of the window to
navigate the list. Since the unit downloads one page of
entries at a time, there may be a slight delay while the
next page of numbers is downloaded.
When connected to a Bluetooth phone, the unit will mute
audio output, pause CD play, and change to the Bluetooth
screen when a call is received. An incoming phone number
will appear at the top of the screen.
3. After entering the phone number, press the
button to
dial the call. The direct dial screen will close once your
call is connected.
Answering an Incoming Call
To end the conversation, press the
button.
To answer the call, touch the
button.
For best reception, speak loudly and clearly. The microphone
is located on the left side of the unit.
32
VM9022HD
3. Touch to highlight the number you want to dial and then
•
•
A2DP: Stream audio from your Bluetooth compatible
audio player and listen to the music through your
VM9022HD. Play/pause, song selection, etc. are not
possible.
AVRCP: Play back, pause, select songs, etc. while
streaming audio from your Bluetooth compatible audio
player to the VM9022HD.
touch the
button.
NOTE: Some mobile phones do not support Phone Book
upload through Bluetooth. This is a limitation of the
phone, not the VM9022HD.
Bluetooth Setup
Auto Answer
NOTE: Song information (e.g. elapsed playing time, song
title, song index, etc.) cannot be displayed on this unit.
You can choose to have the VM9022HD automatically
answer incoming calls to your paired Bluetooth phone. To
turn “Auto answer” on:
Since there are a number of Bluetooth audio players
available on the market, operations with your Bluetooth audio
player using this unit vary greatly.
1. Touch the
button to view the SETUP menu.
Please refer to the instruction manual that came with your
Bluetooth audio player as well as this manual while operating
your player with the VM9022HD.
2. Select the “Bluetooth” sub-menu.
3. Touch the area to the right of “Auto answer” to select
“On”.
Refer to the MUSIC INTERFACE instructions under
“Bluetooth User Interface” on page 31 for information about
on-screen indicators and touch screen functions that may be
available during audio playback.
Auto Connect
The auto Connect option will allow the VM9022HD to
automatically connect to your previously paired Bluetooth
when it is in range. When the Connect option is set to
“Manual”, you must press the
button to re-establish a
connection with your phone. To turn auto “Connect” on:
1. Touch the
button to view the SETUP menu.
2. Select the “Bluetooth” sub-menu.
3. Touch the area to the right of “Connect” to select “Auto”.
Advanced Audio Distribution Profile
(A2DP)
The VM9022HD allows you to play back audio files from your
phone, PDA or personal music player using a Bluetooth
connection.
Before using an audio player, it may be necessary to enter a
PIN code into the unit. Enter the PIN code referring to
“Bluetooth Sub-menu Features” on page 18.
NOTE: Please quit A2DP mode before attempting to
make a phone call, as unexpected results may occur
depending on your mobile phone model.
The VM9022HD can control a Bluetooth audio player via
Advanced Audio Distribution Profile (A2DP) or Audio/Video
Remote Control Profile (AVRCP). Bluetooth audio players (or
Bluetooth adapters) compatible with these profiles can be
connected to this unit. Functionality varies depending on the
profile used:
33
VM9022HD
TROUBLESHOOTING
Table 7: Troubleshooting
Problem
Cause
Corrective Action
GENERAL
Unit will not power on
Radio Fuse blown
Car battery fuse blown
Illegal operation
Install new fuse with correct rating
Install new fuse with correct rating
Press the RESET button located in the bottom right corner of the front panel
Replace battery with new one
Remote control does not function
No/low audio output
Battery depleted
Battery installed incorrectly
Improper audio output connection
Volume set too low
Remove battery and install correctly
Check wiring and correct
Increase volume level
Improper “MUTE” connection
Speakers damaged
Review wiring diagram and check “MUTE” connection
Replace speakers
Heavily biased volume balance
Speaker wiring is in contact with metal part of car
Pirated disc is in use
Adjust the channel balance to the center position
Insulate all speaker wiring connections
Use original copy
Poor sound quality or distortion
Speaker power rating not compatible with unit
Speaker is shorted
Connect proper speakers
Check speaker contact
Tel-Mute malfunction
“MUTE” wire is grounded
Check that the “MUTE” connection is not grounded and that it’s properly insulated
Unit resets itself when engine is off
Incorrect connection between ACC and positive battery Check wiring and correct
wire
TFT MONITOR
No image
Incorrect connection to parking brake wire
Check wiring and correct
PRK SW is activated and parking brake is not engaged
DVD is not compatible with current TV system settings
Improper video signal connections
Stop vehicle in safe place and apply parking brake
Change setup to accommodate disc
Check wiring and correct
Flashing image or interference appears on screen
Prolonged image or improper height/width ratio dis- Improper aspect ratio setup
play
Use correct aspect ratio setting
Monitor stops at incorrect position
TUNER
Moving path is blocked
Press OPEN key to restart monitor movement
Weak station searching
Auto antenna is not fully extended
Auto antenna not properly connected
LOCAL function is activated
Connect the auto antenna control cable properly
Connect the auto antenna control cable properly
Turn LOCAL function off
CD/DVD
Cannot insert disc
Disc already inside unit
Eject current disc and insert new one
34
VM9022HD
Table 7: Troubleshooting
Problem
Cause
Corrective Action
Disc does not play back
Disc is warped or scratched
Use disc in good condition
Disc is dirty or wet
Clean disc with soft cloth
Clean laser pickup with cleaning disc
Use compatible disc
Laser pickup is dirty
Incompatible disc is used
Disc rating exceeds Parental Lock rating limit
Disc region code is not compatible with unit
Disc is inserted upside down
Disc is illegally copied
Change Parental Lock settings to lower restriction
Use disc with proper region code
Insert disc with label side up
Image blurred, distorted, or dark
PBC cannot be used during VCD playback
No repeat or searching while playing VCD
MP3
Use original disc
PCB is not available on the disc
PCB is on
Turn PCB off
Interruption occurred during playback
Disc is dirty or scratched
Clean disc or replace
File is damaged/bad recording
Message is longer than screen can display
Recreate disc with good files
Incorrect playback message displayed
SAT RADIO
No Sound
Incorrect cable connections
Incorrect cable connections
Check RCA cables
Satellite source not available
IPOD
Check Satellite Data cable
iPod source not available
Incorrect cable connections
Check jLink and MediaLink cables
Cannot see video and photo media on TFT screen Wrong iPod Video Settings
Change iPod video settings to TV Out = On
Error Messages
Table 8: Error Messages
Message Displayed
Cause
Corrective Action
Loading
No Disc
Disc is being read
Disc is dirty
Clean disc with soft cloth
Insert disc with label side up
Insert disc
Disc is upside down
Disc not present in loading compartment
Disc is dirty
Bad Disc
Clean disc with soft cloth
Insert disc with label side up
Disc is upside down
Unknown disc
Region Error
Error
Disc format is not compatible with this unit
DVD is not compatible with region code of unit
Illegal mechanism operation
Press EJECT key for 5 seconds to reset loading mechanism
35
VM9022HD
Care and Maintenance
1. Use only a clean silicone cloth and neutral detergent to
clean the front panel or monitor. A rough cloth and non-
neutral detergent (such as alcohol) may result in
scratching or discoloration.
2. Do not get water or cleaning fluids on the unit.
3. If the temperature inside the player gets too hot, a
protective circuit automatically stops play of the disc. If
this occurs, allow the unit to cool before operating the
player again.
4. Never insert anything other than a 5” (12 cm) disc into
the player as the mechanism can be damaged by
foreign objects.
5. Do not attempt to use a 3” (8 cm) CD-Single disc in this
unit, either with or without an adaptor, as damage to the
player and/or disc may occur. Such damage is not
covered by the Warranty on this product.
6. The CD player may not operate properly in extreme hot
or cold. If such conditions occur, allow the interior of the
vehicle to reach a normal temperature before using
player.
7. When the vehicle warms up during cold weather or
under damp conditions, condensation may appear on
the screen. Should this occur, the screen will not
operate properly until the moisture has evaporated.
8. We suggest you use a cleaning disc in this unit more
frequently than in the unit in your home due to the
environmental conditions of the vehicle.
36
VM9022HD
SPECIFICATIONS
DVD/CD Player
•
55 degrees down
Compatible Disc Media: DVD + R / RW (Single and Dual
Layer) and CD-R / RW
Compatible Formats: CD-DA, MP3, WMA, VCD, SVCD, AVI,
MPEG 2, XviD and Kodak picture CD (JPEG)
Signal to Noise Ratio: >95dBA
General
Auxiliary Input Impedance: 10k-ohm
Power Supply: 11 to 16VDC, Negative Ground
Power Antenna (Blue): 500mA max, Current Limited
Protection
Amplifier Remote (Blue / White): 500mA max, Current
Limited Protection
Operating Temperature: -20C ~ 65C
Fuse: 20-Amp, Mini ATM Type
DIN Chassis Dimensions: 7" X 7" X 4" (178mm x 178mm x
100mm)
Dynamic Range: >95dB
Frequency Response: 20Hz to 20 kHz, -3dB
Channel Separation: > 60dB @ 1 kHz
D/A Converter: High performance 24-bit / 192 kHz sample
rate, Multi-Bit Sigma-Delta Modulator
Video
Format: NTSC / PAL
Output: 1Vp-p, 75-ohm
Input: 1Vp-p, 75-ohm
CEA Power Ratings
FM Analog Tuner
Tuning Range: 87.5MHz - 107.9MHz
Mono Sensitivity (-30dB): 9dBf
Quieting Sensitivity (-50dB): 15dBf
Alternate Channel Selectivity: 70dB
Signal to Noise Ratio @ 1 kHz: 58dB
Image Rejection: 80dB
Main Amplifier Power Output:
Stereo Separation @ 1 kHz: >30dB
Frequency Response: 30Hz - 15 kHz, -3dB
18 Watts RMS x 4 channels into 4-Ohms @ < 1% THD+N
Signal to Noise Ratio: 70dBA below reference (Reference: 1
Watt, 4-Ohms)
HD Radio Tuner
Frequency Response: 20 Hz - 20 kHz, -3dB.
Reference Supply Voltage: 14.4VDC
FM: Hybrid -89 dbm, (40 dBf), All Digital -112 dBm (17dBf)
AM: Hybrid -93, dBm, (36 dBf) All Digital -103 dBm (25dBf)
Stereo Separation: 70 dB
Center Amplifier Power Output:
Audio THD: .4%
22 watts RMS X 1 channels into 4-Ohms @ < 1% THD+N
Signal to Noise Ratio: 70dBA below reference. (Reference: 1
watt, 4-Ohms)
Frequency Response: 20Hz to 20 kHz, -3dB
Reference Supply Voltage: 14.4VDC
Frequency Response (+/-3dB) 20 Hz - 18 kHz
Signal-to-Noise Ratio (Stereo): 70 dB
AM Tuner
Tuning Range: 530 kHz - 1710 kHz
Sensitivity (-20dB): 15uV
Signal to Noise Ratio @ 1 kHz: 50dB
Image Rejection: 60dB
*Specifications subject to change without notice.
Frequency Response: 50Hz - 2 kHz, -3dB
Monitor
Screen Size: 6.5" (Measured diagonally), 16:9 Widescreen
•
6.1" (155mm) W X 3.51" (89.2mm) H
Screen Type: TFT Liquid Crystal Display (LCD) active matrix
Response Time: 30mSec rise time, 50mSec fall time
Resolution:
•
280,800 sub pixels, 1200 (W) X 234 (H)
Viewing angle:
•
•
60 degrees left or right
40 degrees up
37
VM9022HD
38
Limited Warranty
DO NOT RETURN THIS PRODUCT TO THE STORE
CD or Multimedia Radios/Headunits
Audiovox Electronics Corporation (“the Company”) is committed to
quality and customer service, and are pleased to offer you this
Warranty. Please read it thoroughly and contact the Company at 1-800-
323-4815 with any questions.
Limitations
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY
IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND,
IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
Who is covered?
The Company extends this warranty to the original retail purchaser of products
purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or
Canada. This warranty is not transferable or assignable. Proof of purchase is
required in the form of an original sales receipt.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES,
INCLUDING
ANY
IMPLIED
WARRANTY
OF
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS
WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY
HEREUNDER
INCLUDING
ANY
IMPLIED
WARRANTY
OF
What is covered?
MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24
MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER. No person or representative is authorized to
assume for the Company any liability other than expressed herein in connection
with the sale of this product.
The Company warrants that should this product or any part thereof, under normal
use, be proven defective in material or workmanship within 12 months from the
date of original purchase, such defect(s) will be repaired or replaced with a new or
reconditioned product (at the Company's option) without charge for parts and
repair labor.
What is not covered?
This Warranty does not cover the following:
Some states do not allow limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential damage so the above
limitations or exclusions may not apply to you. This Warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
•
Damage incurred during shipping or transporting the product to the
Company or a service center
•
•
•
•
•
Elimination of car static or motor noise
Defects in cosmetic, decorative or non-operative structural parts
Correction of antenna problems
Costs incurred for installation, removal or reinstallation of the product
Consequential damage to compact discs, USB devices, digital media
cards, accessories or vehicle electrical systems
Obtaining Warranty Service
•
To obtain repair or replacement within the terms of this Warranty,
call 1-800-323-4815 for the location of a warranty station serving
your area.
•
•
•
Damage caused by improper installation, mishandling, misuse, neglect,
accident, blown fuse, battery leakage, theft or improper storage
Products whose factory serial number/bar code label(s) or markings
have been removed or defaced
Damage resulting from moisture, humidity, excessive temperature,
extreme environmental conditions or external natural causes
•
You must prepay the initial shipping charges to the Company.
The Company will pay the return shipping charges for all
warranteed products returned to an address within the U.S.A.,
Puerto Rico or Canada.
Please package the product securely to avoid shipping damage.
We recommend using a carrier that provides tracking service to
prevent lost packages. Lost or damaged packages are not
covered by this warranty.
•
•
Please review the “Care and Maintenance” section of your Installation
and Operation Manual for additional information regarding the proper
use of your product.
Provide a detailed description of the problem(s) for which you
require service.
Audiovox Electronics Corporation
Hauppauge, NY 11788
Technical Assistance: 1-800-323-4815
© 2008 Audiovox
Ver. 060108
Printed in China
•
•
Choose from over 2 million songs
Transfer to your iPod or
other digital audio player
•
•
Burn unlimited CDs
No confusing restrictions —
own your music
Get up to 35 music downloads with a free 14-day eMusic trial subscription. Offer available to first-time eMusic customers only. Credit card required. Offer and eMusic prices are
subject to change without notice and are subject to eMusic's Terms of Use. eMusic is a registered trademark of eMusic.com Inc. in the U.S.A. and other countries.
iPod is a registered trademark of Apple, Inc. Apple is not a partner, sponsor, or owner of eMusic.
|