Jensen Phase Linear UV8020 User Manual

UV8020

Installation and Operation Manual

CONTENTS

Thank you for choosing a Phase Linear product. We hope you will find the instructions in this

owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll

learn how to use all the features of your new Phase Linear UV8020 Mobile Multimedia

Receiver for maximum enjoyment.

Preparation............................................................................................................................ 1

Installation............................................................................................................................. 2

Controls and Indicators ......................................................................................................... 5

Remote Control..................................................................................................................... 6

Using the TFT Monitor .......................................................................................................... 8

Operating Instructions........................................................................................................... 9

DVD Setup Menu ................................................................................................................ 11

Tuner Operation.................................................................................................................. 12

DVD/VCD Video Operation................................................................................................. 13

DVD/CD Audio Operation ................................................................................................... 16

MP3/WMA Operation .......................................................................................................... 18

Troubleshooting .................................................................................................................. 21

Specifications...................................................................................................................... 23

UV8020

PREPARATION

Congratulations on your purchase of the Phase Linear

UV8020 Mobile Multimedia Receiver.

What’s in the Box

1. Left and Right Double DIN Mounting Brackets

2. Double DIN Sleeve

3. Remote Control with Battery

4. Two Custom Cosmetic Trim Rings

5. Screen Cleaning Cloth

6. M5x6 and M3x4 Screws to Mount Radio to Brackets

7. Speaker Output Harness

8. Power Input Harness

9. 2.5mm to 3.5mm Accessory Cable

10. 2.5mm to RCA Accessory Cable

WARNING! To prevent damage to the mechanism inside

this unit, avoid impact to the TFT monitor.

It’s a good idea to read all of the instructions before beginning

the installation. We recommend having your Phase Linear

UV8020 installed by a reputable installation shop.

WARNING! Using an improper fuse may cause damage

to the unit and result in a fire.

Features

DVD

•

Aspect Ratio - Full and Normal

Fast Forward/Backward - 2X, 4X, 8X and 20X

Play, Pause, Stop, Next Chapter and Previous Chapter

WARNING! The monitor employs an automatic motorized

mechanism. To prevent damage to the core mechanism,

please do not push, pull or swivel the monitor manually.

CD / MP3 / WMA

Tools and Supplies

You will need these tools and supplies to install your UV8020:

•

ID3 Tag Compatible

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and

remove the negative (-) battery cable prior to installation.

Directory Search (MP3 / WMA Only)

Direct Track Access via Remote Control

Burn up to 1500 MP3 and WMA Files onto a DVD+R /

•

Torx type, flat-head and Philips screwdrivers

Wire cutters and strippers

Tools to remove existing radio (screwdriver, socket

wrench set or other tools)

Electrical tape

Crimping tool

Volt meter/test light

Crimp connections

18 gauge wire for power connections

16 – 18 gauge speaker wire

NOTE: If the UV8020 is to be installed in a car equipped

with an on-board drive or navigation computer, do not

disconnect the battery cable. If the cable is

disconnected, the computer memory may be lost. Under

these conditions, use extra caution during installation to

avoid causing a short circuit.

•

Random, Repeat and Intro

Play, Pause, Stop, Next Track and Previous Track

•

AM-FM

•

30 Station Presets (18 FM / 12 AM)

Auto Stereo / Mono

Auto Store / Preview Scan

Auxiliary Input

•

Front Auxiliary Input (audio and video)

2.5mm to 3.5mm A/V Cable Included

2.5mm to RCA A/V Cable Included

WARNING! Only connect the unit to a12-volt power

supply with proper grounding.

Chassis

•

2.0 DIN (Import / ISO-DIN Mountable)

WARNING! Never install this unit where operation and

viewing could interfere with safe driving conditions.

Motorized Slide Down LCD Screen

7" TFT Active Matrix LCD w/ Anti-Glare Coating

336,960 Sub Pixels (1440W X 234H)

Pixel Pitch - 0.107 X 0.370

Screen Tilt / Angle Adjustment

Beep Tone Confirmation (On-OFF Option)

WARNING! To reduce the risk of a traffic accident (except

when using for rear view video camera) never use the

video display function while driving the vehicle. This is a

violation of federal law.

General

•

44-Key Infrared Remote Control

Two Composite Video Outputs for Additional Screens

Three Preset EQ Curves

Front, Rear and Subwoofer Line Output

Programmable Volume Control

Rear Camera Input (Normal and Mirror Image View)

Touch Screen Calibration Mode

WARNING! Never disassemble or adjust the unit.

WARNING! To prevent injury from shock or fire, never

expose this unit to moisture or water.

2VRMS Line Output - All Channels

WARNING! Never use irregular discs.

UV8020

INSTALLATION

ISO DIN Installation

CAUTION: For proper operation of the CD player, the

chassis must be mounted within 30° of horizontal. Make

sure the unit is mounted within this limitation.

This unit is designed to fit into a 2.0 DIN dashboard opening,

found in many imported cars. The unit has threaded holes in

the chassis side panels which may be used with the original

factory mounting brackets of some Toyota, Nissan,

Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the

radio to the dashboard. Please consult with your local car

stereo specialty shop for assistance on this type of

installation.

TAB

NOTE: It is the end-users responsibility to install and

operate this unit in a manner in accordance with local,

state and federal laws. The PARKING BRAKE wire MUST

BE CONNECTED as directed in the manual.

TAB

1. Remove the existing factory radio from the dashboard or

center console mounting. Save all hardware and brack-

ets as they will be used to mount the new radio.

2. Remove the four screws at the front of the radio that

attach the mounting sleeve to the radio chassis (two at

the top and two at the bottom). Remove the Half Sleeve.

3. Remove the factory mounting brackets and hardware

from the existing radio and attach them to the new radio.

Installation Using Mounting Sleeve

1. Press the metal levers on both sides to remove the

mounting sleeve from the radio.

DASHBOARD

2. Install the sleeve.

a. Install adapter if necessary (optional).

b. Install sleeve into adapter or dashboard (use only the

supplied screws). Do not force the sleeve into the

opening or cause it to bend or bow.

3. Use the M5 x 6 screws (provided) to install the mounting

brackets to each side of the radio using the holes

indicated below.

ISO INSTALLATION

INSTALL HALF SLEEVE

Install Bracket Here

CAUTION: Do not exceed M5 X 6MM screw size. Longer

screws may touch and damage components inside the

chassis.

Non-Designated

Screw Prohibited

c. Locate the series of bend-tabs along the top, bottom

and sides of the mounting sleeve. With the sleeve fully

inserted into the dashboard opening, bend as many of

the tabs outward as necessary so that the sleeve is

firmly secured to the dashboard.

M5X6

SCREW

4. Place the radio in front of the dashboard opening so the

wiring can be brought through the dash. Follow the

wiring diagram carefully and make certain all

connections are secure and insulated with wire nuts or

electrical tape. After completing the wiring connections,

plug the ISO connectors into the mating sockets on the

rear of the chassis. Turn the unit on to confirm operation

(vehicle ignition switch must be “on”). If the unit does not

operate, re-check all wiring until the problem is

corrected.

BRACKET

4. Place the radio in front of the dashboard opening so the

wiring can be brought through the mounting sleeve.

5. Mount the new radio assembly to the dashboard or

center console using the reverse procedure in step 1.

UV8020

The 4 tabs on the trim ring will snap into four holes on top and

bottom of the mounting sleeve.

CAUTION! Be careful not to damage the car wiring.

5. Complete wiring as illustrated in the wiring diagram on

page 3. Once the wiring is complete, reconnect the

battery negative terminal. If there is no ACC available,

connect the ACC lead to the power supply with a switch.

TRIM RING

OPTIONAL

MOUNTING SLEEVE

MOUNTING

TRIM RING

SLEEVE

Replacing the Fuse

The fuse is located next to the wiring harness. When

replacing the fuse, use a new 15A replacement fuse. Using a

fuse with an improper rating could damage the unit and

cause a fire.

M3x4

SCREW

After completing the wiring connections, turn the unit on to

confirm operation (ignition switch must be on). If unit does not

operate, recheck all wiring until problem is corrected. Once

proper operation is achieved, turn off the ignition switch and

proceed with final mounting of the chassis.

1. Connect wiring adapter to existing wiring harness.

2. Connect antenna lead.

3. Carefully slide the radio into the sleeve, making sure it is

right-side-up, until it is fully seated and the spring clips

lock it into place.

Using the Cosmetic Trim Ring

Two cosmetic trim rings are packaged with the UV8020 for

installation flexibility. The UV8020 will fit into most import

dashes with little or no modification to the dash board/cavity.

Some US domestic vehicle dashes will accept a Double-DIN

chassis, but there is usually a small gap between the radio

and dash piece after installation is complete. In this case, use

the appropriate trim ring to conceal any gaps that may be

present.

UV8020

WIRING DIAGRAM

Rear View

Video Camera

Auto Antenna

BATTERY

External Power Amplifier

UV8020

CONTROLS AND INDICATORS

1. POWER/MUTE

Press to turn the unit on. Press and hold to turn the unit off.

MultiMedia Receiver

UV8020

When on, press to silence the receiver. Press again to

resume the previous volume level.

2. SRC

Press to select playing mode (SD, AV IN, DISC, Tuner).

3. VOL–

Press to adjust the volume lower.

4. VOL+

Press to adjust the volume higher.

5. OPEN/EJECT

Press to activate the automatic mechanical system and move

the TFT monitor down to reveal the CD and SD Card slots.

Press again to close the TFT.

Press and hold to view the on-screen tilt controls.

6. DIM

Press repeatedly to dim the TFT screen or return to the

brightness setting specified in the Setup menu.

7. A/V AUX IN

8. IR Remote Control Receiver

9. RESET

SRC

DIM

Press to reset system settings to factory default.

10. TFT Display

11. Disc Slot

12. Disc Slot Indicator

13. EJECT Disc

14. SD Card Slot

DISC IN

LABEL SIDE UP

EJECT

UV8020

REMOTE CONTROL

Table 1: Remote Control Functions

Button

Function

VCD

MODE

Name

Ref#

DVD

TUNER

CD/MP3

SUBTITLE

Enters the main menu of

the disc

TITLE

MUTE

Enters the title menu of the

disc

BAND

REPT A-B

Toggles audio output on/off Toggles audio output on/off Toggles audio output on/off Toggles audio output on/off

DVD SETUP

OSD

TIME

Turns the power on/off

POWER/

AUDIO

Changes the audio lan-

guage for disc playback

Select STEREO, MONO L

or MONO R output

TILT

REPT A-B

REPT

Setup to repeat playback

from time frame A to time

frame B

Setup to repeat playback

from time frame A to time

frame B

Setup to repeat playback

from time frame A to time

frame B

PROG

Repeats playback of cur-

rent title/chapter

Repeats playback of cur-

rent title/chapter

Repeats playback of cur-

rent track/album/directory

SRC

Selects playing mode

SUBTITLE

Selects subtitle language,

if available

MUTE

OSD

Displays playing informa-

tion

Displays playing informa-

tion

Displays playing informa-

tion

Display playing information

ANGLE

Plays back disc in differ-

ent angle for a scene

Plays back Picture CD with

different angle of picture

displayed

MODE

SEL

Displays SOURCE Menu

10+

Displays Audio/Display

Stops playback

VOL -

VOL +

Decreases volume

Increases volume

Decreases volume

Increases volume

Decreases volume

Increases volume

Decreases volume

Increases volume

Selects the previous track

Selects the previous chap- Selects the previous chap- Searches an available

ter for playback, press and ter for playback, press and radio station by decreasing for playback, press and

hold for fast reverse

tuning frequency

hold for fast reverse

Selects the next chapter

for playback, press and

hold for fast forward

Selects the next chapter

for playback, press and

hold for fast forward

Searches an available

radio station by increasing

tuning frequency

Selects the next track for

playback, press and hold

for fast forward

Pauses playback/starts

playback

Pauses playback/starts

playback

Pauses playback/starts

playback

GOTO

ZOOM

BAND

EJECT

Enter chapter directly

Enter track directly

NOTE: Your remote control may differ slightly from the

one pictured here. The above diagram is for illustrative

purposes only.

Zooms in/out on an image

Selects AM/FM Band

Opens Front Panel

UV8020

Table 1: Remote Control Functions

Button

Name

Function

VCD

Ref#

DVD

TUNER

CD/MP3

Decreases monitor tilt

angle

Decreases monitor tilt

angle

Decreases monitor tilt

angle

Decreases monitor tilt

angle

Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle

Confirms Entry

1, 2, 3, 4, 5, 27

6, 7, 8, 9, 0,

10+

Directly accesses chapter

(press 10+ to move for-

ward in increments of ten

and then press a single

number for the final digit)

Directly accesses track

(press 10+ to move for-

ward in increments of ten

and then press a single

number for the final digit)

(Numeric

Keypad)

TIME

Displays clock on TFT

DVD

SETUP

Displays DVD Setup menu Displays DVD Setup menu

Displays DVD Setup menu

Navigates on-screen menu Navigates on-screen menu Navigates on-screen menu Navigates on-screen menu

PROG

Displays Programmed

Playback Screen

Displays Programmed

Playback Screen

Displays Programmed

Playback Screen

UV8020

USING THE TFT MONITOR

Open/Close TFT Monitor

Image Setting

Open TFT Monitor

Table 2 shows the video output mode for each playing

source.

Press the EJECT button on the front panel (5) or remote

control (23) to slide the monitor panel down and reveal the

disc and SD card slots.

Table 2: Video Output Modes

Close TFT Monitor

Playing Source

Video Output Modes

Press the EJECT button on the front panel (5) or remote

AM/FM TUNER

RGB Mode

CVBS Mode

control (23) to close the monitor panel.

DVD

Monitor Tilt Angle Adjustment

AUX IN

A known characteristic of LCD panels is the quality of the

display in relationship to the viewing angle. The monitor

angle can be adjusted for optimum viewing using one of the

following methods.

*CVBS – Composite Video Baseband Signal

Parking Brake Inhibit

When the pink "Parking" wire is connected to the vehicle

brake switch, the front TFT monitor will display video

only when the parking brake is engaged.

Step by Step Angle Adjustment

Press the ( ) or ( ) button on the remote control (25, 24)

to adjust the tilt angle of the screen one step at a time.

Continuous Angle Adjustment

Press and hold the ( ) or ( ) button on the remote control

to adjust the tilt angle in a continuous motion.

On-Screen Panel Controls

Press and hold the /EJECT button (5) on the control panel

to display the on-screen tilt control menu.

TILT+

TILT -

EXIT

•

TILT+: Touch repeatedly to tilt the bottom of the screen

outward.

TILT-: Touch repeatedly to tilt the bottom of the screen

inward.

EXIT: Touch to exit the on-screen tilt control menu.

Reverse Driving Use

If a review video camera is connected, the monitor

automatically switches to CAMERA mode when the vehicle is

put into reverse. When the vehicle is taken out of reverse, the

monitor returns to the source in use previously.

UV8020

OPERATING INSTRUCTIONS

The Audio menu will automatically exit after a few seconds of

inactivity. To exit quickly, touch the bottom left corner of the

screen.

Power On / Off

Volume Adjustment

To increase or decrease the volume level, press the VOL-/+

buttons on the unit (3, 4) or on the remote control (15, 16).

When the volume level reaches “0” or “40”, a beep sounds,

indicating that the adjustment limit has been reached. The

volume ranges from “0” to “40”. The TFT screen displays the

volume level for 3 seconds.

Press the

button (1) on the unit (or the button (4) on

the remote control) to turn the unit on.

Setup Menu (SET)

To access the Setup Menu, touch the top left corner of the

screen to view the SOURCE menu, and then select the “SET”

option. The SET menu options are as follows:

Press and hold the button to power off the unit. The

monitor is drawn back into the main compartment (if the Tilt

function is in use).

Audible Beep Confirmation

An audible beep tone confirms each function selection. The

Beep tone can be disabled through the Setup menu.

Audio/Display Menu

•

LOUD OFF/ON: When listening to music at low

volumes, this feature will boost the bass and treble

ranges to compensate for the characteristics of human

hearing. Touch the arrows to turn LOUD OFF/ON.

BEEP OFF/ON: Touch the arrows to turn the audible

BEEP confirmation OFF/ON.

24 HOURS/12 HOURS: Select 12 or 24-hour clock

display.

Clock: Touch the left arrow to set the hour and the right

arrow to set the minutes.

The Audio/Display menu feature allows you to easily adjust

your audio system to meet the acoustical characteristics of

your vehicle, which vary depending on the type of vehicle and

its measurements. Proper setting of the Fader and Balance

boosts the effects of the cabin equalizer.

Mute

•

Press the

button (3) on the remote to mute the volume from the unit.

MUTE” is displayed on the screen. Press the button

button (1) on the front panel or the MUTE

Press the SEL button on the remote control (13) or on screen

(or touch the bottom left corner of the screen) to view the

audio menu. To adjust an audio feature:

again to restore the volume. “ Adjusting the volume or using

any of the audio setup features cancels the mute function.

•

Use the arrow keys on the remote control to move left/

right to select an option or up/down to modify settings

for the selected option.

SUB OFF/ON: Select “ON” if an external subwoofer is

connected.

Playing Source Selection

CAMERA OFF/ON: When a rear-view camera is

properly installed, the System will automatically display

the rear camera image when the vehicle is placed in

reverse gear. To view the camera image regardless of

the gear setting, select “ON”.

MIRROR OFF/ON: Select “ON” to reverse the screen

image for rear view camera use.

LCD CALIBRATE: Touch and hold to initiate screen

calibration. Touch the + marks when prompted.

VOL LAST/ADJUST

Press the SRC button (2) on the front panel or the SRC

button (8) on the remote to change between available playing

sources in the following order: SD, AUX (AV-IN), DISC and

BAND (Radio). The playing mode is displayed on the TFT

screen.

•

Touch the arrows on the TFT screen at the top or bottom

of each option to adjust the settings.

Table 3: Audio Adjustments

•

Audio Function

Adjustable Range

Source Menu

You can also use the touch screen to change the source

through the SOURCE MENU. To access the SOURCE

MENU, touch the top left corner of the screen (or press the

MODE button (12) on the remote control).

EQ (graphic equalizer)

User

Flat

Clas (classical)

Pop

•

VOL LAST: When turned on, the unit will resume

the same volume level that was set when the unit

was last turned off.

Touch the SD, AUX, DISC or BAND button to select the

corresponding source.

Rock

BAS (bass)

-7 to +7

F7 to R7

L7 to R7

-8 to +8

33 to 0

•

VOL ADJUST: Select this option if you want to set

a turn-on volume (A-VOL) regardless of the volume

setting prior to turning the unit off.

External Devices

TRE (treble)

External peripheral devices, including a game console,

camcorder, navigation unit, iPod, Zune, etc. can be

connected to the front of this unit using one of the A/V Media

Adapter Cables (included). Select “AUX” mode to access

auxiliary devices. You cannot directly control external devices

connected to the AUX IN inputs.

FAD (fader)

•

A VOL: Touch the arrows to set the desired turn-on

volume when VOL ADJUST is selected.

US BAND/EURO BAND: Touch and hold to select

“EURO BAND”. The unit will automatically turn off and

re-boot when the tuner band is changed.

BAL (balance)

BRI (brightness)

CON (contrast)

COL (color)

SUB (subwoofer volume)

NOTE: External sources will be displayed incorrectly if

the MIRROR function is activated. To correct this

problem, access the setup menu and set the MIRROR

function to “OFF”.

System Reset

To correct a system halt or other

illegal operation, use the tip of a pen

to press the reset button (9) located

on the front bottom-left corner of the unit. After a system

reset, the unit restores all factory default settings.

[RESET] Button

NOTE: The EQ mode will automatically change to

“USER” when individual audio functions are adjusted. If

the USER settings correspond with a preset curve, that

EQ option will be displayed.

UV8020

NOTE: If the unit is reset while a DVD is playing, the DVD

resumes play once the reset is complete.

UV8020

DVD SETUP MENU

During disc play, press the DVD SETUP button (29) on the

Table 4: System Setup Menu

remote control to access the SYSTEM SETUP menu.

ASPECT RATIO 4: 3 PS

With 16:9 display,

AUDIO LAN-

GUAGE

ENGLISH

Choose from

the left and right

sides are cut off.

audio languages

contained on the

DVD If you are

watching a disc

recorded in multi-

ple languages

FRENCH

SYSTEM LANGUAGE VIDEO

SPANISH

4:3 LB

16:9

With 16:9 display,

the top and bot-

tom are cut off.

PORTUGUESE

GERMAN

Image is pre-

sented in wide

view with a 16:9

aspect ratio.

NOTE: Lan-

guages are DVD

dependent and

not all languages

may be supported.

VIDEO FORMAT

SCREEN SAVER

ASPECT RATIO

PASSWORD

RATING

PASSWORD

RATING

_ _ _ _

Enter a 4-digit

password to acti-

vate the “Rating”

feature. The origi-

nal password is

“8888”.

SUBTITLE

LANG

ENGLISH

Choose the lan-

guage you would

like subtitles to

appear in (if avail-

able)

FRENCH

DEFAULT

SPANISH

EXIT SETUP

1 KID SAFE

2 G

Select the appro-

priate rating level

for the intended

audience.

PORTUGUESE

GERMAN

NOTE: Subtitles

are DVD depen-

dent and not all

languages may be

supported.

3 PG

Use the

cursor buttons to choose between

You may override

higher ratings by

using your pass-

word.

4 PG13

5 PG-R

6 R

SYSTEM, LANGUAGE, or VIDEO setup options.

Table 4: System Setup Menu

SYSTEM SETUP

OFF

Turn subtitles off

MENU LANG

ENGLISH

FRENCH

SPANISH

PORTUGUESE

GERMAN

Select the default

language in which

you would like the

DVD menu (if

applicable) to be

displayed.

7 NC-17

8 ADULT

RESTORE

VIDEO FOR-

MAT

NTSC

The color signals

are output in the

standard NTSC

format.

DEFAULT

Select “Reset” to

restore the fac-

tory default set-

tings for the

Rating system

only.

VIDEO SETUP

BRIGHTNESS

CONTRAST

HUE

PAL

The color signals

are output in the

standard PAL for-

mat.

12 - 0

+6 to -6

12 - 0

8 - 0

Use the

cur-

sor buttons to set

the video output

options

LANGUAGE SETUP

AUTO

The color signal

output is switched

automatically

OSD LAN-

GUAGE

ENGLISH

Select the appro-

priate on-screen

language for the

DVD

SATURATION

SHARPNESS

GERMAN

SPANISH

FRENCH

based on the cur-

rent video input

signal - NTSC or

PAL.

EXIT SETUP

SCREEN

SAVER

Turn screen saver

on/off.

OFF

UV8020

TUNER OPERATION

Recalling a Station

1. Select a band (if needed).

2. Touch an on-screen preset button (4) to select the

corresponding stored station.

Tuner TFT Display

Seek Tuning

To seek the next higher station:

•

Touch the >>| button on screen.

Press the >>| button (18) on remote control.

SRC

To seek the next lower station:

87.50

101.10

98.90

106.70

107.90

104.10

•

Touch the |<<| button on screen.

Press the |<< button (17) on the remote control.

87.50

101.10

98.90

106.70

107.90

104.10

EQ USER

Manual Tuning

To increase or decrease the tuning frequency one step:

•

Press the /\ or V buttons on screen.

Press and hold the |<< or >>| button on the screen or

remote control (17, 18).

01:13

SEL

BAND

Auto Store (AS)

To select six strong stations and store them in the current

band:

Using Preset Stations

Six numbered preset buttons store and recall stations for

each band. All six stored stations (P1-P6) for the current

band appear on the screen.

1. Select a band (if needed).

1. Current radio band indicator

2. Radio frequency indicator

3. Clock

4. Preset radio stations: Touch to recall preset stations

5. Current Equalizer Mode

6. |<<: Touch to seek backward

7. >>|: Touch to seek forward

8. Touch to tune forward one step

9. Touch to tune backward one step

10. AS: Touch to automatically store stations

11. PS (Preset Scan): Touch to scan all stored preset

stations, stopping for 5 seconds at each and continuing

until a station is selected

12. BAND: Touch to change between AM/FM bands

13. Touch to adjust Equalizer/Audio and Display settings

14. Touch to view the SOURCE menu and select a new

playback source

2. Touch AS button on the screen (10) for to activate the

Auto Store function.

Storing a Station

1. Select a band (if needed), then select a station.

2. Press and hold the preset station position 1-6 on the

screen (4) or press and hold the number 1-6 button (27)

on the remote control.

The new stations replace stations already stored in that band.

Preset Scan (PS)

Touch the PS button (11) on screen to scan all stored preset

stations, stopping for 5 seconds at each and continuing until

a station is selected. Touch again to stop preview scan.

87.50

101.10

98.90

106.70

107.90

104.10

3. The new preset station (4) appears highlighted and the

preset station indicator (15) displays the new current

preset position.

15. Current preset station indicator

Switching to Radio Tuner Source

•

Touch the top left corner of the screen (SRC), or press

the MODE button (12) on the remote control, to view the

SOURCE menu. Touch “BAND”.

•

Press the SRC button (2) on the front panel or remote

control (8) to switch to the AM/FM or RADIO source.

Selecting FM/AM Band

Touch the BAND button (22) on the screen or remote control

(18) to change between the following bands: FM1, FM2,

FM3, AM1, and AM2.

UV8020

DVD/VCD VIDEO OPERATION

also change the source by touching the top left corner to

display the “SOURCE” menu. Select “DISC” to access DVD

mode.

Stopping Playback

NOTE: When properly installed, DVD video cannot be

Touch the button on screen or on the remote control (14) to

stop disc play.

displayed on the main TFT screen unless the parking

brake is applied. If you attempt to play a DVD while the

vehicle is moving, the TFT screen displays “DO NOT

WATCH VIDEO WHILE DRIVING” with a black

background. Rear video screens, if applicable, will

operate normally.

To resume playback, touch the /|| button on screen or on the

remote control (19).

Controlling Disc Playback

During DVD/VCD playback, press the center of the screen to

display the on-screen playback controls.

Pausing Playback

Touch the /|| button on screen or on the remote control (19)

to suspend or resume disc play.

NOTE: INT and L/R are only available for VCDs.

Inserting a Disc

Moving Through Tracks

To insert a disc, you must first press the /EJECT button (5)

on the control panel or remote control (23) to reveal the disc

slot (11). Insert a disc, label side up, into the disc slot. The

front panel will close automatically and disc play begins.

Press the >>| button on the remote control (18) or on screen

to advance to the next chapter on the disc.

INT

L/R

SRC

Press the |<< button on the remote control (17) or on screen

to move to the previous chapter.

NOTE: If Parental Lock (Rating) is activated and the disc

inserted is not authorized, the 4-digit code must be

entered and/or the disc must be authorized (see “System

Setup Menu” on page 11).

Fast Forward/Reverse

Press and hold the >>| or |<< buttons on the remote control

or on screen to fast forward or fast reverse. Press and hold

once for X 2. Press and hold additional times for X 4, X 8, X

20 or PLAY. Press the play/pause >/|| button to end fast

forward or reverse and resume normal playback.

You cannot insert a disc if there is already a disc in the unit or

if the power is off.

Repeat Chapter/Title (REPT)

SEL

AUDIO

SUBTITLE

Press the REPT button (7) on the remote control multiple

times during playback to select from the following repeat play

options:

NOTE: The unit is designed for play of standard 5” (12

cm.) discs only. Do not attempt to use 3” (8 cm.) CD

singles in this unit, either with or without an adaptor, as

damage to the player and/or the disc may occur. Such

damage will not be covered by the warranty on this

product.

•

SRC: Touch to view the SOURCE menu and select a

new playback source.

INT: During VCD playback, touch to play the first 15

seconds of each track. When a desired track is reached,

press the INT button again to cancel the function and

play the selected track.

•

VCD: REP ONE (track), REP ALL (disc), REP OFF

DVD: REP Chapter, REP Title, REP OFF

Repeat Section (REPT A-B)

To repeat a specified section of a track (chapter), perform the

following steps:

NOTE: DVD-R and DVD-RW will not play unless the

recording session is finalized and the DVD is closed.

•

: No function.

•

Press the A->B button on the remote control (6) to

select the starting point. The display will show “REPEAT

A-”.

L/R: During VCD playback, touch to choose between

Mono Left Channel, Mono Right Channel, and Stereo.

: Press to stop and retain playback position. Press

again to stop and return to beginning of disc.

: Touch to move to the previous track.

: Touch to move to the next track.

NOTE: If you do not insert a disc or SD card, you must

press the EJECT button to close the control panel.

•

Press A->B when you reach the desired ending point.

The display shows “REPEAT A-B” and the selected

section will play repeatedly.

•

Ejecting a Disc

To cancel section repeat, press the A->B button again. “A-B

CANCEL” appears on the display.

SEL: Touch to adjust Equalizer/Audio and Display

settings.

To eject a disc, you must first press the /EJECT button (5)

on the control panel or remote control (23) to reveal the disc

slot (11). Press the /EJECT button (13) behind the TFT

panel to eject the disc. The unit automatically reverts to Tuner

mode.

DVD Playback Features

The following remote control features are available during

DVD playback:

•

AUDIO: Touch to choose an alternate audio language, if

available.

: No function.

•

SUBTITLE: Touch to activate subtitles, change subtitle

language or disable subtitles, if available.

: Touch to suspend playback. Touch again to resume

playback.

•

AUDIO: Press to choose an alternate audio language, if

available.

SUBTITLE: Press to select an alternate subtitle

language, if available.

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted,

press the SRC button (2) on the front panel or remote control

(8) until “READ” appears near the top of the screen. You can a

•

UV8020

•

TITLE: Press to display the title or chapter list. Use the

or cursor buttons or the numeric buttons to

enter a title or chapter number, and then press OK to

play.

ANGLE: Press to select an alternate viewing angle, if

available.

ZOOM: Press to zoom the picture at ZOOM 2, ZOOM 3,

ZOOM 4, ZOOM 1/2, ZOOM 1/3 or ZOOM 1/4, or select

OFF to return to normal view.

To delete the list, highlight “CLEAR” and then press OK.

Press PROG to exit the programmed playback screen.

•

1/4 ENG – English is the selected subtitle language

out of 4 possible choices

OFF – There are no alternate angles recorded for

this scene

Remote Control Direct Track Entry

To select a track directly, use the number pad on the remote

control (27). For single digit entries, press the corresponding

number. For two digit entries, press the 10+ button followed

by the last digit (i.e., for track 16, press 10+ and then 6).

•

VCD Playback Information

The following information is displayed at the top of the screen

during VCD playback:

GOTO Direct Track/Chapter Access

Use the GOTO function to access a track (chapter) directly.

NOTE: Feature availability is dependent upon DVD

embedded information.

•

TRK ##/## – “1/18” indicates the first of 18 tracks on the

VCD is currently playing.

1. Press the GOTO button (20) on the remote control. The

On Screen Display information will appear with the track

number highlighted.

2. Use the number keys on the remote control to enter the

3-digit track number directly (i.e. for track 10, enter

“010”.

– “X” indicates repeat play is OFF, “1” indicates

repeat track, “D” indicates repeat directory, and “A”

indicates repeat disc.

Programmed Playback

1. Press the PROG button (34) on the remote control to

•

Press OSD repeatedly to view the following information:

for elapsed/remaining playing time:

access the programmed playback screen:

3. Press the OK button to confirm and begin playback.

•

00:02:18 – total elapsed playing time for disc

C –00 :34 :37 – remaining playing time

T 00:02:18 – total elapsed playing time for current

track

C –00 :34 :37 – remaining playing time for current

track

Playback Information

During DVD and VCD playback, press the OSD button (10)

on the remote control to display playback information on the

screen, including the media playing and current playback

time. Continue pressing the OSD button to display additional

information, as indicated below.

•

General Disc Information

DVD Playback Information

The following information is displayed at the top of the screen

during DVD playback:

Table 5: Disc Properties

Max Play

Time

Symbol

12cm Disc Properties

Single side single layer

(DVD-5)

(MPEG 2

Method)

133 minutes

242 minutes

266 minutes

484 minutes

Single side double layer

(DVD-9)

•

TT 5/8 – “5 / 8" indicates the fifth of 8 titles on the DVD is

currently playing.

CH 2/16 – “2 / 16" indicates that the second of 16 titles

on the DVD is currently playing.

Press OSD repeatedly to view the following information:

for elapsed/remaining playing time:

Double side single layer

(DVD-10)

Double side double layer

(DVD-18)

2. Use the

cursor buttons to access the

fields on the “PROG” screen.

PROG

Single side single layer

(VCD)

(MPEG 1

Method)

74 minutes

•

00:02:18 – total elapsed playing time for disc

C –00 :34 :37 – remaining playing time

T 00:02:18 – total elapsed playing time for current

track

Single side single layer

74 minutes

•

C –00 :34 :37 – remaining playing time for current

track

3. Use the number buttons on the remote control to enter a

track number in each field.

4. Press the >/|| button (19) on the remote control or

highlight “PLAY” on screen and then press OK to begin

playback in the numbered order indicated.

•

1/5 ENG – English is the selected audio language

out of 5 possible choices

5.1 CH – The current language is recorded in 5.1

surround sound

UV8020

Table 6: Disc Symbols

Meaning

Symbol

Number of voice languages recorded. The

number inside the icon indicates the number

languages on the disc (maximum of 8).

Number of subtitle languages available on

the disc (maximum of 32).

Number of angles provided (maximum of 9).

Aspect ratios available. “LB” stands for Let-

ter Box and “PS” stands for Pan/Scan. In the

example on the left, the 16:9 video can be

converted to Letter Box video.

Indicates the region code where the disc

can be played.

•

Region 1: USA, Canada, East Pacific

Ocean Islands

•

Region 2: Japan, Western Europe,

Northern Europe, Egypt, South Africa,

Middle East

•

Region 3: Taiwan, Hong Kong, South

Korea, Thailand, Indonesia, South-East

Asia

Region 4: Australia, New Zealand,

Middle and South America, South Pacific

Ocean Islands/Oceania

Region 5: Russia, Mongolia, India,

Middle Asia, Eastern Europe, North

Korea, North Africa, North-West Asia

Region 6: Mainland China

•

ALL: All regions

UV8020

DVD/CD AUDIO OPERATION

Instructions for TFT control and Insert/Eject are the same for

DVD and CD operation. Please see the DVD/Disc Video

Operation section for information about these topics.

•

RDM: Touch to activate/deactivate Random play mode.

: Touch to suspend playback. Touch again to resume

playback.

Programmed Playback

1. Press the PROG button (34) on the remote control to

•

access the programmed playback screen:

The UV8020 will play music or other audio files from the

following disc media:

Controlling Playback

Stopping Playback

•

CD-DA

CD-R/RW

DVD

DVD+R/RW

Touch the button on screen or on the remote control (14) to

stop disc play.

To resume playback, touch the /|| button on screen or on the

remote control (19).

DVD-R/RW

SD Card (see “MP3/WMA Operation” on page 18)

Pausing Playback

Upon inserting a disc, the TFT screen will close automatically

and the track number and elapsed playing time will appear at

the top of the screen (see “CD Playback Information” on

page 17).

Touch the /|| button on screen or on the remote control (19)

to suspend or resume disc play.

2. Use the

cursor buttons to access the

fields on the “PROG” screen.

Moving Through Tracks

PROG

Press the >>| button on the remote control (18) or on screen

to advance to the next track on the disc.

CD Player User Interface

The on-screen indicators and touch key areas for CD

playback are outlined below.

Press the |<< button on the remote control (17) or on screen

to move to the previous track.

Repeat Chapter/Title (REPT)

Touch the RPT button on screen or press the REPT button

(7) on the remote control multiple times during playback to

select from the following repeat play options: REP ONE

(track), REP ALL (disc), REP OFF.

INT

SRC

3. Use the number buttons on the remote control to enter a

track number in each field.

Repeat Section (REPT A-B)

4. Press the || button (19) on the remote control or

highlight “PLAY” on screen and then press OK to begin

playback in the numbered order indicated.

To repeat a specified section of a track (chapter), perform the

following steps:

•

Press the A->B button on the remote control to select

the starting point. The display will show “REPEAT A-”.

Press A->B when you reach the desired ending point.

The display shows “REPEAT A-B” and the selected

section will play repeatedly.

To delete the list, highlight “CLEAR” and then press OK.

Press PROG to exit the programmed playback screen.

•

SEL

RPT

RDM

Remote Control Direct Track Entry

To select a track directly, use the number pad on the remote

control (27). For single digit entries, press the corresponding

number. For two digit entries, press the 10+ button followed

by the last digit (i.e., for track 16, press 10+ and then 6).

To cancel section repeat, press the A->B button again. “A-B

CANCEL” appears on the display.

•

SRC: Touch to view the SOURCE menu and select a

new playback source.

INT: Touch to play the first 15 seconds of each track.

When a desired track is reached, press the INT button

again to cancel the function and play the selected track.

: No function.

NOTE: CD-R and CD-RW will not play unless the

recording session is finalized.

GOTO Direct Track/Chapter Access

Use the GOTO function to access a track (chapter) directly.

•

1. Press the GOTO button (20) on the remote control. The

On Screen Display information will appear with the track

number highlighted.

2. Use the number keys on the remote control to enter the

3-digit track number directly (i.e. for track 10, enter

“010”.

Fast Forward/Reverse

Press and hold the >>| or |<< buttons on the remote control

(18, 17) or on screen to fast forward or fast reverse. Press

and hold once for X 2. Press and hold additional times for X

: Press to stop playback.

: Touch to move to the previous track.

: Touch to move to the next track.

SEL: Touch to adjust Equalizer/Audio and Display

settings

RPT: Touch to activate/deactivate Repeat play mode

: No function.

4, X 8, X 20 or PLAY. Press the play/pause /|| button to end

fast forward or reverse and resume normal playback.

•

3. Press the OK button (26) to confirm and begin playback.

UV8020

CD Playback Information

The following information is displayed at the top of the screen

during CD playback:

•

TRK ##/## – “1/18” indicates the first of 18 tracks on the

CD is currently playing.

•

– “X” indicates repeat play is OFF, “1” indicates

repeat track, and “A” indicates repeat disc.

Press OSD repeatedly to view the following information:

for elapsed/remaining playing time:

•

00:02:18 – total elapsed playing time for disc

C –00 :34 :37 – remaining playing time

T 00:02:18 – total elapsed playing time for current

track

•

C –00 :34 :37 – remaining playing time for current

track

UV8020

MP3/WMA OPERATION

Instructions for TFT control and Insert/Eject are the same for

DVD and MP3 operation. Please see the DVD/Disc Video

Operation section for information about these topics.

MP3 Playing Order

Loading an SD Card

When selected for play, files and folders (Folder Search, File

Search or Folder Select) are accessed in the order they were

written by the CD writer. As a result, the order in which they

are expected to be played may not match the order in which

they are actually played. You may be able to set the order in

which MP3/WMA files are to be played by writing them onto a

medium such as a CD-R with their file names beginning with

play sequence numbers such as "01" to "99".

To Insert an SD card, you must first press the /EJECT

button on the control panel (5) or remote control (23) to

reveal the SD card slot (14). Insert the SD card into the card

slot and the unit will read the audio media files on the card

automatically.

Media and File Requirements

This player allows you to play back MP3 and WMA files

recorded onto CD-R/RWs, DVD+R/RWs, DVD-R/RWs and

SD cards. For CD-RW discs, please make sure it is formatted

using the full method and not the quick method to prevent

illegal disc operation.

For example, a medium with the following folder/file hierarchy

is subject to Folder Search, File Search or Folder Select, as

shown below.

Up to 1500 songs/files can be burned onto a disc/card for a

MEGA DVD music mix. Do not exceed this number of songs/

files or readability problems may occur.

DISC IN

LABEL SIDE UP

EJECT

MP3 Format Compatibility

The file naming formats listed below are compatible with this

unit:

•

ISO 9660 – file name: 12 characters, file extension: 3

characters

ISO 9660 – file name: 31 characters, file extension: 3

characters

Joliet – 64 characters

To remove the card, first press the SRC button (6) to switch to

another mode and stop SD playback. Push in and release to

pop the card out. Grasp the SD card and pull it straight out.

Most cards have a thin recess that helps with removal.

If the file or folder name does not conform to ISO 9660 file

system standards, it may not be displayed or played back

correctly. Use the following settings when compressing audio

data for your MP3 disc:

•

Transfer Bit Rate: 128kbps

Sampling Frequency: 48kHz

When recording MP3 up to the maximum disc capacity,

disable additional writing. For recording on an empty disc up

to maximum disc capacity, use the "Disc at once" setting.

The UV8020 player will only recognize three folder levels and

does not display folders containing only other folders. In the

example above, the unit will display folders 3, 4, 6, and 8, but

not 2 and 7 since they do not contain any tracks directly.

Folder 5 is not recognized at all since it is at the fourth level.

UV8020

MP3 Player User Interface

Controlling Playback

Programmed Playback

The on-screen indicators and touch key areas for MP3

Playing MP3/WMA Files

1. Press the PROG button (34) on the remote control to

playback are outlined below.

access the programmed playback screen:

After inserting a MP3/WMA disc or SD card, files will play in

the sequence of the “Root” directory.

NOTE: When burning MP3 / WMA files onto a DVD disc,

use the 2X or 4X burning option, if available. This slower

burning speed will help eliminate buffer errors and

increase disc reading reliability. Also, use folders when

burning large numbers of songs / files to a disc for easy

music navigation. Select the "Disc at Once" option and

close your disc.

SRC

OSD

[ – ] NEVER LET ME DOWN AGAIN

001.01 – Cherr

002.02 – Chris

003.03 – Crazy

004.04 – Phish

005.05 – Phish

006.06 – Phish

2. Use the

cursor buttons to access the

Stopping Playback

fields on the “PROG” screen.

Touch the button on screen or on the remote control (14) to

stop playback.

PROG

SEL

RPT

RDM

To resume playback, touch the /|| button on screen or on the

remote control (19).

Pausing Playback

Touch the /|| button on screen or on the remote control (19)

to suspend or resume playback.

1. SRC: Touch to view the SOURCE MENU and select a

Moving Through Tracks

new playback source.

: Touch to move up a folder.

: Navigate song list up.

Press the >>| button on the remote control (18) or on screen

to advance to the next file on the disc.

3. Use the number buttons on the remote control to enter a

track number in each field.

4. Press the >/|| button (19) on the remote control or

highlight “PLAY” on screen and then press OK to begin

playback in the numbered order indicated.

4. OSD: Touch to view On Screen Display information.

Press the |<< button on the remote control (17) or on screen

to move to the previous file.

: Touch to stop disc playback.

: Touch to move to the next track.

/||: Touch to play/pause disc playback.

Repeat Playback

Press the REPT button (7) on the remote control to alter

repeat mode according to the following: REP ONE (Single),

REP DIR (Directory), REP OFF.

8. RDM: Touch to activate/deactivate Random play mode.

9. : Navigate song list down.

10. RPT: Touch to activate/deactivate Repeat play mode.

11. SEL: Touch to adjust Equalizer/Audio and Display

settings.

To delete the list, highlight “CLEAR” and then press OK.

Press PROG to exit the programmed playback screen.

Remote Control Direct Track Entry

NOTE: CD-R and CD-RW will not play unless the

recording session is finalized.

To select a track directly, use the number pad on the remote

control (27). For single digit entries, press the corresponding

number. For two digit entries, press the 10+ button followed

by the last digit (i.e., for track 16, press 10+ and then 6).

12. Touch song to play.

13.

: Touch to move to the previous track.

Fast Forward/Reverse

14. View ID3 information.

15. Touch these icons to access the corresponding media

on your disc or SD card. If the media type is not present

on the disc or card, the icon will not appear.

Press and hold the >>| or |<< buttons on the remote control

or on screen to fast forward or fast reverse. Press and hold

once for X 2. Press and hold additional times for X 4, X 8, X

20 or PLAY. Press the play/pause >/|| button to end fast

forward or reverse and resume normal playback.

GOTO Direct Track/Chapter Access

Use the GOTO function to access a track (chapter) directly.

1. Press the GOTO button on the remote control. The On

Screen Display information will appear with the track

number highlighted.

2. Use the number keys on the remote control to enter the

4-digit track number directly (i.e. for track 10, enter

“0010”. Continue pressing the 10+ for multiples of ten

into the 1000’s.

•

: Audio

: Photos

: Video

3. Press the OK button to confirm and begin playback.

UV8020

MP3 Playback Information

The following information is displayed at the top of the screen

during CD playback:

•

TRK ##/## – “9/150” indicates the ninth of 150 tracks on

the disc is currently playing.

•

– “X” indicates repeat play is OFF, “1” indicates

repeat song, and “D” indicates repeat directory (folder).

Press OSD repeatedly to view the following information:

for elapsed/remaining playing time:

•

00:02:18 – total elapsed playing time for disc

C –00 :34 :37 – remaining playing time for disc

UV8020

TROUBLESHOOTING

Table 7: Troubleshooting

Problem

Cause

Corrective Action

GENERAL

Unit will not power on

Radio Fuse blown

Install new fuse with correct rating

Car battery fuse blown

Illegal operation

Press the RESET button located in the bottom right corner of the front panel

Replace battery with new one

Remote control does not function

No/low audio output

Battery depleted

Battery installed incorrectly

Improper audio output connection

Volume set too low

Remove battery and install correctly

Check wiring and correct

Increase volume level

Speakers damaged

Replace speakers

Heavily biased volume balance

Adjust the channel balance to the center position

Speaker wiring is in contact with metal part of car Insulate all speaker wiring connections

Poor sound quality or distortion

Pirated disc is in use

Use original copy

Speaker power rating not compatible with unit

Speaker is shorted

Connect proper speakers

Check speaker contact

Check wiring and correct

Unit resets itself when engine is off

Incorrect connection between ACC and positive

battery wire

TFT MONITOR

No image

Incorrect connection to parking brake wire

Parking brake is not engaged

Check wiring and correct

Stop vehicle in safe place and apply parking brake

Change setup to accommodate disc

Flashing image or interference appears on

screen

DVD is not compatible with current “Video For-

mat” settings

Improper video signal connections

Improper aspect ratio setup

Check wiring and correct

Prolonged image or improper height/width

ratio display

Use correct aspect ratio setting

TUNER

Weak station searching

Auto antenna is not fully extended

Auto antenna not properly connected

Connect the auto antenna control cable properly

CD/DVD

Cannot insert disc

Image blurred, distorted, or dark

Disc already inside unit

Disc is illegally copied

Eject current disc and insert new one

Use original disc

UV8020

Table 7: Troubleshooting

Problem

Cause

Corrective Action

Disc does not play back

Disc is warped or scratched

Disc is dirty or wet

Use disc in good condition

Clean disc with soft cloth

Clean laser pickup with cleaning disc

Use compatible disc

Laser pickup is dirty

Incompatible disc is used

Disc rating exceeds Parental Lock rating limit

Disc region code is not compatible with unit

Disc is inserted upside down

Change Parental Lock settings to lower restriction

Use disc with proper region code

Insert disc with label side up

MP3

Interruption occurred during playback

Disc is dirty or scratched

Clean disc or replace

File is damaged/bad recording

Message is longer than LCD can display

Recreate disc with good files

Incorrect playback message displayed

Care and Maintenance

1. Use only a clean silicone cloth and neutral detergent to

clean the front panel or monitor. A rough cloth and non-

neutral detergent (such as alcohol) may result in

scratching or discoloration.

2. Do not get water or cleaning fluids on the unit.

3. If the temperature inside the player gets too hot, a

protective circuit automatically stops play of the disc. If

this occurs, allow the unit to cool before operating the

player again.

4. Never insert anything other than a 5” (12 cm) compact

disc into the player as the mechanism can be damaged

by foreign objects.

5. Do not attempt to use a 3” (8 cm) CD-Single disc in this

unit, either with or without an adaptor, as damage to the

player and/or disc may occur. Such damage is not

covered by the Warranty on this product.

6. The CD player may not operate properly in extreme hot

or cold. If such conditions occur, allow the interior of the

vehicle to reach a normal temperature before using

player.

7. When the vehicle warms up during cold weather or

under damp conditions, condensation may appear on

the LCD panel. Should this occur, the screen will not

operate properly until the moisture has evaporated.

8. We suggest you use a cleaning disc in this unit more

frequently than in the unit in your home due to the

environmental conditions of the vehicle.

UV8020

SPECIFICATIONS

DVD/CD Player

CEA Power Ratings

Compatible Disc Media: DVD + R / RW (Single and Dual

Layer) and CD-R / RW

Compatible Media Formats: CD-DA, MP3, WMA, VCD,

SVCD, AVI, MPEG1 / 2, XviD, and Kodak picture CD (JPEG).

Signal to Noise Ratio: > 95dBA

Dynamic Range: > 90dB

Frequency Response: 20Hz to 20 kHz, -3dB

Channel Separation: > 60dB @ 1 kHz

D/A Converter: Multi-Bit Sigma-Delta Modulator

Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ <

1% THD+N

Signal to Noise Ratio: 70dBA below reference (Reference: 1

Watt, 4-Ohms)

Frequency Response: 20 Hz - 20 kHz, -3dB. (Aux Input used

as reference input)

Reference Supply Voltage: 14.4VDC

Video

Format: NTSC, PAL (auto-detection)

Output: 1Vp-p (75-ohm)

Input: 1Vp-p (75-ohm)

FM Tuner

Tuning Range (USA): 87.5MHz - 107.9MHz

Tuning range (Europe): 87.50MHz-108.00MHz

Mono Sensitivity (-30dB): 9dBf

*Specifications subject to change without notice.

Quieting Sensitivity (-50dB): 15dBf

Alternate Channel Selectivity: 70dB

Signal to Noise Ratio @ 1 kHz: 58dB

Image Rejection: 80dB

Stereo Separation @ 1 kHz: >30dB

Frequency Response: 30Hz - 15 kHz, -3dB

AM Tuner

Tuning Range (USA): 530 kHz - 1720 kHz

Tuning range (Europe): 522kHz-1620kHz

Sensitivity (-20dB): 15uV

Signal to Noise Ratio @ 1 kHz: 50dB

Image Rejection: 60dB

Frequency Response: 50Hz - 2 kHz, -3dB

Monitor

Screen Size: 7.0" (Measured diagonally), 16:9 Widescreen,

6.06" (154.1mm) W X 3.42" (87mm) H

Screen Type: TFT Liquid Crystal Display (LCD) active matrix

Resolution: 336,960 sub pixels, 1440 (W) X 234 (H)

General

Auxiliary Input impedance: 10k

Power Supply: 11 to 16VDC, negative ground

Amplifier Remote (Blue/White): 500mA max, current limited

protection

Operating Temperature: -20C ~ 65C

Fuse: 15-amp, ATO type

2.0 DIN chassis dimensions: 7" X 7" X 4" (178mm x 178mm x

100mm)

UV8020

Limited Warranty

DO NOT RETURN THIS PRODUCT TO THE STORE

CD or Multimedia Radios/Headunits

Audiovox Electronics Corporation (“the Company”) is committed to

quality and customer service, and are pleased to offer you this

Warranty. Please read it thoroughly and contact the Company at 1-800-

323-4815 with any questions.

Limitations

THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY

IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND,

IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE

PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.

Who is covered?

The Company extends this warranty to the original retail purchaser of products

purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or

Canada. This warranty is not transferable or assignable. Proof of purchase is

required in the form of an original sales receipt.

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED

WARRANTIES,

INCLUDING

ANY

IMPLIED

WARRANTY

MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS

WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY

HEREUNDER

INCLUDING

ANY

IMPLIED

WARRANTY

What is covered?

MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24

MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE

COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL

DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS

OR IMPLIED, WHATSOEVER. No person or representative is authorized to

assume for the Company any liability other than expressed herein in connection

with the sale of this product.

The Company warrants that should this product or any part thereof, under normal

use, be proven defective in material or workmanship within 12 months from the

date of original purchase, such defect(s) will be repaired or replaced with a new or

reconditioned product (at the Company's option) without charge for parts and

repair labor.

What is not covered?

This Warranty does not cover the following:

Some states do not allow limitations on how long an implied warranty lasts or the

exclusion or limitation of incidental or consequential damage so the above

limitations or exclusions may not apply to you. This Warranty gives you specific

legal rights and you may also have other rights which vary from state to state.

•

Damage incurred during shipping or transporting the product to the

Company or a service center

•

Elimination of car static or motor noise

Defects in cosmetic, decorative or non-operative structural parts

Correction of antenna problems

Costs incurred for installation, removal or reinstallation of the product

Consequential damage to compact discs, USB devices, digital media

cards, accessories or vehicle electrical systems

Obtaining Warranty Service

•

To obtain repair or replacement within the terms of this Warranty,

call 1-800-323-4815 for the location of a warranty station serving

your area.

•

Damage caused by improper installation, mishandling, misuse, neglect,

accident, blown fuse, battery leakage, theft or improper storage

Products whose factory serial number/bar code label(s) or markings

have been removed or defaced

Damage resulting from moisture, humidity, excessive temperature,

extreme environmental conditions or external natural causes

•

You must prepay the initial shipping charges to the Company.

The Company will pay the return shipping charges for all

warranteed products returned to an address within the U.S.A.,

Puerto Rico or Canada.

Please package the product securely to avoid shipping damage.

We recommend using a carrier that provides tracking service to

prevent lost packages. Lost or damaged packages are not

covered by this warranty.

•

Please review the “Care and Maintenance” section of your Installation

and Operation Manual for additional information regarding the proper

use of your product.

Provide a detailed description of the problem(s) for which you

require service.

Audiovox Electronics Corporation

Hauppauge, NY 11788

Technical Assistance: 1-800-323-4815

www.audiovox.com

Ver. 121207

Printed in China

Arcam Blu Ray Disc Player BDP300 User Manual
Blaupunkt AUSTIN CD41 User Manual
Blaupunkt BRIGHTON MP35 User Manual
Burnham LE 2 User Manual
Canon 8806A002 User Manual
Canon HF M40 User Manual
Dual ILLUMINITE TS65 User Manual
FujiFilm Digital Camera 16228393 User Manual
HP (Hewlett Packard) Photosmart 6221 User Manual
JVC GR SX26 User Manual