CD RECEIVER
CD-RECEIVER
RECEPTEUR CD
CD-RECEIVER
KD-G401
KD-G401
• This unit is equipped with the display demonstration. To cancel it, see page 6.
• Dieses Gerät ist mit einer Demonstrationsfunktion für das Display ausgestattet. Auf
Seite 6 wird beschrieben, wie Sie diese Demonstrationsfunktion deaktivieren können.
• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler,
référez-vous à la page 6.
• Dit toestel heeft een display-demonstratiefunctie. Zie bladzijde 6 voor het annuleren van
deze functie.
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de
desbetreffende handleiding.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJZING
GET0195-001A
[E/EX]
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit ...............................
How to use the MODE button ...................
2
2
MP3 INTRODUCTION ...................... 23
What is MP3?............................................ 23
How are MP3 files recorded and played
LOCATION OF THE BUTTONS ............
4
4
back? ...................................................... 23
Control panel.............................................
MP3 OPERATIONS ......................... 24
Playing an MP3 disc ................................. 24
Locating a file or a particular portion
BASIC OPERATIONS .......................
Turning on the power ................................
Canceling the display demonstration ........
Setting the clock........................................
5
5
6
7
on a disc ................................................. 25
Selecting MP3 playback modes ................ 27
RADIO OPERATIONS ......................
8
SOUND ADJUSTMENTS ................... 28
Selecting preset sound modes
Listening to the radio.................................
8
Storing stations in memory ....................... 10
Tuning in to a preset station ...................... 11
(C-EQ: custom equalizer) ....................... 28
Adjusting the sound .................................. 29
RDS OPERATIONS ......................... 12
What you can do with RDS ....................... 12
Other convenient RDS functions and
OTHER MAIN FUNCTIONS ................ 30
Changing the general settings (PSM) ....... 30
Detaching the control panel ...................... 33
adjustments ............................................ 17
USING THE REMOTE CONTROLLER ..... 34
CD OPERATIONS ........................... 19
Playing a CD ............................................. 19
Locating a track or a particular portion
Location of the buttons.............................. 35
TROUBLESHOOTING ...................... 36
on a CD .................................................. 20
Selecting CD playback modes .................. 21
Playing a CD Text ...................................... 22
Prohibiting disc ejection ............................ 22
MAINTENANCE ............................. 38
Handling discs........................................... 38
SPECIFICATIONS ........................... 39
Note:
For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on
the unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.
BEFORE USE
*For safety....
*Temperature inside the car....
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
3
LOCATION OF THE BUTTONS
Control panel
Display window
KD-G401
1
(standby/on attenuator) button
s ∞ (down) button
2 SEL (select) button
3 FM/AM button
–10 button
4 CD button
5 Loading slot
6 Display window
7 0 (eject) button
8 TP PTY (traffic programme/programme type)
button
9 Remote sensor
• You can control this unit with an optionally
purchased remote controller.
p 5 (up) button
+10 button
q Control dial
w Number buttons
e EQ (equalizer) button
r MO (monaural) button
t SSM (Strong-station Sequential Memory)
button
y RPT (repeat) button
u RND (random) button
i MODE button
Display window
d Tuner reception indicators
MO (monaural), ST (stereo)
f RDS indicators
TP, PTY, AF, REG
g MP3 indicator
h CD indicator
j Playback mode/item indicators
RND (random),
RPT (repeat)
k LOUD (loudness) indicator
l EQ (equalizer) indicator
/ Sound mode (C-EQ: custom equalizer)
indicators
ROCK, CLASSIC, POPS, HIP HOP, JAZZ,
USER
z Disc information indicators
TAG (ID3 Tag),
x Main display
c Source display
Volume level indicator
v Tr (track) indicator
(disc),
(folder),
(folder),
(track/file)
o DISP (display) button
;
a
4/¢
(control panel release) button
buttons
4
BASIC OPERATIONS
1
3
2
Turning on the power
4 Adjust the sound as you want.
(See pages 28 and 29.)
1 Turn on the power.
To drop the volume in a moment
Press
briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2 Select the source.
To turn off the power
Press and hold
second.
for more than one
To operate the tuner (FM or AM),
see pages 8 – 18.
To play a CD,
see pages 19 – 22.
To play an MP3 disc,
see pages 24 – 27.
“SEE YOU” appears, then the unit turns off.
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
3 Adjust the volume.
To increase the volume
To decrease the volume
CAUTION on Volume Setting:
Discs produce very little noise compared with
other sources. If the volume level is adjusted for
the tuner, for example, the speakers may be
damaged by the sudden increase in the output
level. Therefore, lower the volume before playing a
disc and adjust it as required during playback.
Volume level appears.
Volume level indicator
5
Canceling the display
demonstration
3 Select “DEMO OFF.”
When shipped from the factory, display
demonstration has been activated, and starts
automatically when no operations are done for
about 20 seconds.
DEMO OFF
DEMO ON
• It is recommended to cancel the display
demonstration before you use the unit for the
first time.
To cancel the display demonstration, follow
the procedure below:
4 Finish the setting.
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 31.)
To activate the display demonstration, repeat
the same procedure and select “DEMO ON” in
step 3.
2 Select “DEMO” if not shown on the
display.
6
Setting the clock
5 Finish the setting.
You can also set the clock system to either
24 hours or 12 hours.
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 31.)
To check the current clock time or change the
display mode
Press DISP (display) repeatedly.
Each time you press the button, the
display changes as follows:
• During AM and FM non-RDS station
operation:
2 Set the hour.
1 Select “CLOCK H” (hour) if not shown on
the display.
Frequency
Clock
2 Adjust the hour.
1
2
• During FM RDS Station operation:
Station name Station frequency
Clock
Programme type
3 Set the minute.
• During disc operation:
1 Select “CLOCK M” (minute).
Elapsed
playing time
2 Adjust the minute.
Clock
1
2
Disc title /
performer
Track title
Notes:
• While playing a conventional CD, “NO NAME”
appears for the disc title/performer and the track
title.
• For indication change while playing a CD Text or
an MP3 disc, see also pages 22 and 25.
4 Set the clock system.
1 Select “24H/12H.”
2 Select “24H” or “12H.”
1
2
• During power off:
The power turns on and the clock time is
shown for 5 seconds, then the power turns off.
7
RADIO OPERATIONS
Listening to the radio
2 Start searching for a station.
To search for stations of
higher frequencies
You can use either automatic searching or manual
searching to tune in to a particular station.
To search for stations of lower frequencies
When a station is received, searching stops.
Searching for a station automatically:
Auto search
1 Select the band (FM1 – 3, AM).
To stop searching before a station is
received, press the same button you have
pressed for searching.
Each time you press the
button, the band changes as
follows:
FM1
FM2
FM3
AM
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
Selected band appears.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
8
When an FM stereo broadcast is hard to
receive
Searching for a station manually:
Manual search
1 Press MODE to enter the
functions mode while listening
to an FM stereo broadcast.
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
2 Press MO (monaural), while
“MODE” is still flashing on the
display, so that “MONO”
appears on the display.
FM1
FM2
FM3
AM
Each time you press the button,
monaural mode turns on and off
alternately.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
MO (monaural) indicator
2 Press and hold ¢
or
4
until “M” (manual) starts flashing on
the display.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.
3 Tune in to a station you want while
“M” (manual) is still flashing.
To tune in to stations of
higher frequencies
To tune in to stations of lower frequencies
• If you release your finger from the button,
the manual mode will automatically turns
off after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for
FM and 9 kHz for AM—MW/LW) until you
release the button.
9
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number
buttons—No.1 (lowest frequency) to No.6
(highest frequency).
Storing stations in memory
You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
Manual preset
You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.
1 Select the FM band (FM1 – 3) you
Ex.: Storing FM station of 92.5 MHz into the
preset number 1 of the FM1 band.
want to store FM stations into.
Each time you press the
button, the band changes as
follows:
1 Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
FM1
FM2
FM3
AM
Each time you press the
button, the band changes as
follows:
2 Press MODE to enter the functions
FM1
FM2
FM3
AM
mode.
2 Tune in to a station (in this example,
of 92.5 MHz).
To tune in to stations of
higher frequencies
3 Press and hold SSM for about
2 seconds.
To tune in to stations of lower frequencies
“SSM” flashes, then disappears when
automatic preset is over.
10
Tuning in to a preset station
3 Press and hold the number button
(in this example, 1) for more than
2 seconds.
You can easily tune in to a preset station.
Remember that you must store stations first. If
you have not stored them yet, see “Storing
stations in memory” on pages 10 and 11.
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
FM1
FM2
FM3
AM
Preset number flashes for a while.
4 Repeat the above procedure to store
other stations into other preset
numbers.
2 Select the number (1 – 6) for the
preset station you want.
Notes:
• A previously preset station is erased when a new
station is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset
the stations again.
Note:
You can also use the 5 (up) or ∞ (down) button on
the unit to select the next or previous preset stations.
Each time you press the 5 (up) or ∞ (down) button,
the next or previous preset station is tuned in.
11
RDS OPERATIONS
What you can do with RDS
To use Network-Tracking Reception
You can select the different modes of network-
tracking reception to continue listening to the
same programme in its finest reception.
RDS (Radio Data System) allows FM stations to
send an additional signal along with their regular
programme signals. For example, the stations
send their station names, as well as information
about what type of programme they broadcast,
such as sports or music, etc.
Another advantage of RDS function is called
“Enhanced Other Networks.” By using the
Enhanced Other Networks data sent from a
station, you can tune in to a different station of a
different network broadcasting your favorite
programme or traffic announcement while
listening to another programme or to another
source such as CD.
When shipped from the factory, “AF” is selected.
• AF:
Network-Tracking Reception is
activated with Regionalization set to
“off.”
With this setting, the unit switches to
another station within the same
network when the received signals
from the current station become
weak. (In this mode, the programme
may differ from the one currently
received.)
The AF indicator lights up but the
REG indicator does not.
By receiving the RDS data, this unit can do the
following:
• Tracing the same programme automatically
(Network-Tracking Reception)
• Standby Reception of TA (Traffic
Announcement) or your favorite programme
• PTY (Programme Type) search
• Programme search
• AF REG: Network-Tracking Reception is
activated with Regionalization set to
“on.”
With this setting, the unit switches to
another station, within the same
network, broadcasting the same
programme when the received
signals from the current station
become weak.
• And some other functions
Tracing the same programme
automatically (Network-Tracking
Reception)
Both the AF indicator and the REG
indicator light up.
• OFF:
Network-Tracking Reception is
deactivated.
Neither the AF indicator nor the REG
indicator lights up.
When driving in an area where FM reception is
not good, the tuner built in this unit automatically
tunes in to another RDS station, broadcasting the
same programme with stronger signals. So, you
can continue to listen to the same programme in
its finest reception, no matter where you drive.
(See the illustration on page 18.)
AF indicator
REG indicator
Two types of the RDS data are used to make
Network-Tracking Reception work correctly
—PI (Programme Identification) and AF
(Alternative Frequency).
Without receiving these data correctly from the
RDS station you are listening to, Network-
Tracking Reception will not operate.
12
Using TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from
the current source (another FM station or CD).
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 31.)
• TA Standby Reception will not work if you are
listening to an AM station.
Press TP PTY to activate TA Standby Reception.
2 Select “AF-REG” (alternative
frequency/regionalization reception)
if not shown on the display.
7 When the current source is FM, the TP
indicator either lights up or flashes.
• If the TP indicator lights up, TA Standby
Reception is activated.
If a station starts broadcasting a traffic
announcement, “TRAFFIC” appears on the
display, and this unit automatically tunes in to
the station. The volume changes to the
preset TA volume level (see page 17) and the
traffic announcement can be heard.
3 Select the desired mode—“AF,”
“AF REG,” or “OFF.”
• If the TP indicator flashes, TA Standby
Reception is not yet activated since the
station being received does not provide the
signals used for TA Standby Reception.
To activate TA Standby Reception, you need
to tune in to another station providing these
4 Finish the setting.
signals. Press ¢
or
4 to search
for such a station.
When a station providing these signals is
tuned in, the TP indicator stops flashing and
remains lit. Now TA Standby Reception is
activated.
7 When the current source is other than FM,
the TP indicator lights up.
If a station starts broadcasting a traffic
announcement, “TRAFFIC” appears on the
display, and this unit automatically changes the
source and tunes in to the station.
To deactivate the TA Standby Reception,
press TP PTY again. The TP indicator
disappears.
13
Using PTY Standby Reception
4 Finish the setting.
PTY Standby Reception allows the unit to switch
temporarily to your favorite programme (PTY:
Programme Type) from the current source
(another FM station or CD).
• PTY Standby Reception will not work if you are
listening to an AM station.
7 When the current source is FM, the PTY
indicator either lights up or flashes.
• If the PTY indicator lights up, PTY Standby
Reception is activated.
You can select your favorite programme type for
PTY Standby Reception.
If a station starts broadcasting the selected
PTY programme, this unit automatically
tunes in to the station.
When shipped from the factory, PTY Standby
Reception is turned off. (“OFF” is selected for
PTY Standby Reception.)
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated since the
station being received does not provide the
signals used for PTY Standby Reception.
To activate PTY Standby Reception, you
need to tune in to another station providing
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 31.)
these signals. Press ¢
or
4 to
search for such a station.
When a station providing these signals is
tuned in, the PTY indicator stops flashing
and remains lit. Now PTY Standby Reception
is activated.
2 Select “PTY STBY” (standby) if not
7 When the current source is other than FM,
the PTY indicator lights up.
shown on the display.
If a station starts broadcasting the selected
PTY programme, this unit automatically
changes the source and tunes in to the station.
To deactivate the PTY Standby Reception,
select “OFF” in step 3 on the left column. The
PTY indicator disappears.
3 Select one of the twenty-nine PTY
codes. (See page 18.)
Selected code name
appears on the display
and is stored into
memory.
14
Searching your favorite programme
3 Press and hold the number button
for more than 2 seconds to store the
PTY code selected into the preset
number you want.
You can search any one of the PTY codes.
In addition, you can store your 6 favorite
programme types in the number buttons.
When shipped from the factory, the following
6 programme types have been stored in the
number buttons (1 to 6).
To store your favorite programme types, see
below.
To search for your favorite programme type,
see page 16.
3
1
2
POP M
ROCK M
EASY M
Selected PTY code and
“MEMORY” appear
6
4
5
CLASSICS
AFFAIRS
VARIED
alternately for a while.
To store your favorite programme types
1 Press and hold TP PTY for more
than 2 seconds while listening to an
FM station.
4 Press and hold TP PTY for more
than 2 seconds to exit from this
mode.
The last selected PTY code appears.
2 Select one of the twenty-nine PTY
codes. (See page 18.)
Selected code name
appears on the display.
15
To search for your favorite programme type
3 Press ¢
or
4 to start PTY
search for your favorite programme.
1 Press and hold TP PTY for more
than 2 seconds while listening to an
FM station.
• If there is a station broadcasting a programme
of the same PTY code as you selected, that
station is tuned in.
The last selected PTY code appears.
• If there is no station broadcasting a
programme of the same PTY code as you
selected, the station will not change.
2 To select one of your favorite
programme type
Note:
In some areas, the PTY search will not work correctly.
or
To select any one of the twenty-nine
PTY codes.
Ex.: When “ROCK M” is selected
16
Setting the TA volume level
Other convenient RDS
You can preset the volume level for TA Standby
Reception. When a traffic programme is received,
the volume level automatically changes to the
preset level.
• See also “Changing the general settings
(PSM)” on page 30.
functions and adjustments
Automatic selection of the station
when using the number buttons
Usually when you press the number button, the
preset station is tuned in.
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
However, when the preset station is an RDS
station, something different will happen. If the
signals from that preset station are not sufficient
for good reception, this unit, using the AF data,
tunes in to another frequency broadcasting the
same programme as the original preset station is
broadcasting. (Programme search)
2 Press ¢
(volume).
or
4 to select “TA VOL”
3 Turn the control dial to set to the desired
volume.
You can set it from “VOL 00” to “VOL 30” or
“VOL 50” (depending on the amplifier gain
control setting: see page 32).
• The unit takes some time to tune in to another
station using programme search.
4 Press SEL (select) to finish the setting.
To activate programme search, follow the
procedure below.
• See also “Changing the general settings
(PSM)” on page 30.
Automatic clock adjustment
When shipped from the factory, the clock built in
this unit is set to be readjusted automatically
using the CT (Clock Time) data in the RDS
signal.
If you do not want to use automatic clock
adjustment, follow the procedure below.
• See also “Changing the general settings
(PSM)” on page 30.
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
2 Press ¢
or
4 to select
“P(Programme)-SEARCH.”
3 Turn the control dial clockwise to select “ON.”
Now programme search is activated.
4 Press SEL (select) to finish the setting.
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
To cancel programme search, repeat the same
procedure and select “OFF” in step 3 by turning
the control dial counterclockwise.
2 Press ¢
or
4 to select “AUTO
ADJ” (adjustment).
3 Turn the control dial counterclockwise to select
“OFF.”
Now automatic clock adjustment is canceled.
4 Press SEL (select) to finish the setting.
To reactivate clock adjustment, repeat the
same procedure and select “ON” in step 3 by
turning the control dial clockwise.
Note:
You must stay tuned to the same station for more than
2 minutes after setting “AUTO ADJ” to “ON.”
Otherwise, the clock time will not be adjusted. (This is
because the unit takes up to 2 minutes to capture the
CT data in the RDS signal.)
17
PTY codes
NEWS:
AFFAIRS:
News
SOCIAL:
Programmes on social
activities
Topical programmes expanding
on current news or affairs
Programmes which impart
advice on a wide variety of topics
Sport events
RELIGION: Programmes dealing with any
aspect of belief or faith, or the
INFO:
nature of existence or ethics
SPORT:
PHONE IN: Programmes where people can
express their views either by
EDUCATE: Educational programmes
DRAMA: Radio plays
phone or in a public forum
CULTURE: Programmes on national or
regional culture
TRAVEL:
LEISURE:
JAZZ:
Programmes about travel
destinations, package tours,
and travel ideas and
opportunities
Programmes concerned with
recreational activities such as
gardening, cooking, fishing,
etc.
SCIENCE:
Programmes on natural science
and technology
VARIED:
Other programmes like comedies
or ceremonies
POP M:
Pop music
ROCK M:
EASY M:
LIGHT M:
Rock music
Easy-listening music
Light music
Jazz music
COUNTRY: Country music
NATION M: Current popular music from
another nation or region, in that
country’s language
OLDIES:
FOLK M:
CLASSICS: Classical music
OTHER M: Other music
WEATHER: Weather information
FINANCE: Reports on commerce, trading,
the Stock Market, etc.
Classic pop music
Folk music
CHILDREN: Entertainment programmes for
children
DOCUMENT: Programmes dealing with
factual matters, presented in an
investigative style
The same programme can be received on different frequencies.
Programme 1
broadcasting on
frequency A
Programme 1
broadcasting on
frequency E
Programme 1
broadcasting on
frequency B
Programme 1
broadcasting on
frequency C
Programme 1
broadcasting on
frequency D
18
CD OPERATIONS
Refer “MP3 OPERATIONS” on pages 24 to 27 for
operating MP3 discs.
Notes:
• When a CD is inserted upside down, “EJECT”
appears on the display and the CD automatically
ejects.
• If there is no CD in the loading slot, you cannot
select CD as the source. “NO DISC” appears on
the display.
Playing a CD
Insert a CD into the loading slot.
The unit turns on, draws
the CD and starts
• If the current disc is a CD Text, disc title/performer
and then track title will automatically appear.
playback automatically.
To stop play and eject the CD
Press 0.
Note on One-Touch Operation:
CD play stops and the CD automatically ejects
from the loading slot. The source changes to the
tuner (you will hear the last received station).
• If you change the source, CD play also stops
(without ejecting the CD).
Next time you select “CD” as the source, CD
play starts from where playback has been
stopped previously.
When a CD is already in the loading slot, pressing
CD turns on the unit and starts playback
automatically.
CD indicator
Current source indication
Notes:
• If the ejected disc is not removed for about 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust.
(Disc play will not start this time.)
• You can eject the disc even when the unit is turned
off.
Total playing time
of the inserted disc of the inserted disc
Total track number
Elapsed playing time Current track
number
All tracks will be played repeatedly until you stop
playback.
19
To go to a track quickly (+10 and –10 buttons)
Locating a track or a
particular portion on a CD
1
Press MODE to enter the functions mode
while playing a CD.
To fast-forward or reverse the track
Press and hold ¢
playing a CD, to fast-forward the
track.
, while
2
Press +10 or –10.
To skip 10 tracks* forwards
to the last track
Press and hold
reverse the track.
4, while playing a CD, to
To skip 10 tracks* backwards
to the first track
To go to the next or previous tracks
* First time you press +10 or –10 button, the
track skips to the nearest higher or lower
track with a track number of multiple ten (ex.
10th, 20th, 30th).
Then each time you press the button, you can
skip 10 tracks (see “How to use the +10 and
–10 buttons” below).
Press ¢
briefly, while
playing a CD, to go ahead to the
beginning of the next track.
Each time you press the button
consecutively, the beginning of
the next tracks is located and
played back.
• After the last track, the first track will be
selected, and vice versa.
Press
4 briefly, while playing a CD, to go
back to the beginning of the current track.
Each time you press the button consecutively,
the beginning of the previous tracks is located
and played back.
How to use the +10 and –10 buttons
• Ex. 1: To select track number 32 while
playing track number 6
To go to a particular track directly
Press the number button corresponding to the
track number to start its playback.
(Three times)
(Twice)
Track 6
\ 10 \ 20 \ 30 \ 31 \ 32
• Ex. 2 :To select track number 8 while
playing track number 36
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than one
second.
(Three times)
(Twice)
Track 36
\ 30 \ 20 \ 10 \ 9 \ 8
20
To play back tracks repeatedly
(Track Repeat Play)
Selecting CD playback modes
To play back tracks at random
(Disc Random Play)
You can play back the current track repeatedly.
1 Press MODE to enter the
functions mode while playing a
CD.
You can play back all tracks on the CD at random.
1 Press MODE to enter the
functions mode while playing a
CD.
2 Press RPT (repeat), while
“MODE” is still flashing on the
display, so that “TRK RPT”
appears on the display.
2 Press RND (random), while
“MODE” is still flashing on the
display, so that “DISC RND”
appears on the display.
Each time you press the button,
track repeat play mode turns on
and off alternately.
Each time you press the button,
disc random play mode turns on
and off alternately.
RPT indicator
RND and
(disc) indicators
When track repeat play is turned on, the RPT
indicator lights up on the display. The current
track starts playing repeatedly.
When disc random play is turned on, the
RND and indicators light up on the display. A
track randomly selected starts playing.
21
Prohibiting disc ejection
Playing a CD Text
In a CD Text, some information about the disc (its
disc title, performer, and track title) is recorded.
This CD Text information will be shown
You can prohibit disc ejection and can lock a disc
in the loading slot.
automatically when you play a CD Text.
While pressing CD, press and hold 0 for
more than 2 seconds.
To change the CD Text information
manually, select text display mode while
playing a CD Text.
Press DISP (display) repeatedly.
Each time you press the button,
the display changes as follows:
“EJECT”flashes on the display for about 5 seconds,
and the disc is locked and cannot be ejected.
Disc title / performer
Track title
To cancel the prohibition and unlock the
disc
(
lights up on the display)
While pressing CD, press and hold 0 again for
more than 2 seconds.
“EJECT” appears on the display, and the disc
ejects from the loading slot.
Elapsed playing time and
Current track number
Clock and
Current track number
Notes:
• The display shows up to 8 characters at one time
and scrolls if there are more than 8 characters.
See also “To select the scroll mode—SCROLL” on
page 32.
Some characters or symbols will not be shown (and
be blanked) on the display.
(Ex. “ABCå!d#” ]“ABCA D ”)
• When you press DISP (display) while playing a
conventional CD, “NO NAME” appears for the
disc title/performer and the track title.
• When track title is shown, the Tr indicator and
current track number also appear on the right side
of the display.
22
MP3 INTRODUCTION
What is MP3?
How are MP3 files recorded
and played back?
MP3 is an abbreviation of Motion Picture Experts
Group (or MPEG) Audio Layer 3. MP3 is simply a
file format with a data compression ratio of 1:10
(128 Kbps*).
MP3 “files (tracks)” can be recorded in “folders”
—in PC terminology.
During recording, the files and folders can be
arranged in a way similar to arranging files and
folders of computer data.
“Root” is similar to the root of a tree. Every file
and folder can be linked to and be accessed from
the root.
* Bit rate is the average number of bits that one
second of audio data will consume. The unit used is
Kbps. To get a better audio quality, choose a higher
bit rate. The most popular bit rate for encoding is
128 Kbps.
The illustration below shows an example of how
MP3 files are recorded on a CD-R or CD-RW,
how they are played back, and how they are
searched for on this unit.
• For details information about the MP3
discs, refer to “A Guide to MP3/WMA”
(separate volume).
Notes:
Compatible with ID3 Tag
• This unit can read a CD-ROM containing MP3
files. However, if non-MP3 files are recorded
together with MP3 files, this unit will take a longer
time to scan the disc. It may also cause the unit to
malfunction.
Extra information data such as album title,
performer name, song title, recording year, music
genre and a brief comment can be stored within
an MP3 file.
• This unit cannot read or play an MP3 file without
the extension code <.mp3>.
• This unit is not compatible with MP3 file encoded
with Layer 1 and Layer 2 formats.
This unit can show both ID3v1 (Version 1) and
ID3v2 (Version 2) tags on the display. (See page
25.)
• This unit is not compatible with Playlist**.
• Some characters cannot be shown correctly.
• If both ID3v1 and ID3v2 are recorded on a
disc, ID3v2 information will be shown.
**A playlist is a simple text file, used on a PC, which
enables users to make their own playback order
without physically rearranging the files.
Hierarchy
Level 1
ROOT
Level 2
Level 3
Level 4
Level 5
6
7
01
02
03
4
3
05
10
5
: Folder and their playback
order
01
11
12
04
1
8
9
: MP3 files and their playback
order
1
2
23
MP3 OPERATIONS
Refer also to “CD OPERATIONS” on pages
19 to 22.
Notes:
• MP3 discs require a longer readout time.
(It differs due to the complexity of the folder/file
configuration.)
• When playback starts, folder and file names (or ID3
tags) will automatically appear. (See also page 25.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select the CD player as the source or
turn the power on, disc play starts from where
playback has been stopped previously.
Playing an MP3 disc
Insert an MP3 disc into the loading slot.
Note on One-Touch operation:
When a disc is already in the loading slot, pressing CD
To stop play and eject the disc
Press 0.
turns on the unit and starts playback automatically.
Playback stops and the disc automatically ejects
from the loading slot.
CD indicator
Current source indication
MP3 indicator
Total folder
number
Total file
number
Ex.: When the disc contains 19 folders and
144 MP3 files
All files will be played repeatedly until you stop
playback.
24
Notes:
To change the display information
• The display shows up to 8 characters at a time and
scrolls if there are more than 8 characters.
See also “To select the scroll mode—SCROLL” on
page 32.
• When folder or file name is shown, current folder
number or the Tr indicator and current file number
also appear on the right side of the display.
While playing back an MP3 file, you can change
the disc information shown on the display.
Press DISP (display) repeatedly.
Each time you press the button,
the display changes to show the
following:
• When “TAG DISP” is set to “TAG ON”
(initial setting: see page 32)
Locating a file or a particular
portion on a disc
Album name / performer
(folder name*)
(TAG lights up on the display)
To fast-forward or reverse the file
Press and hold ¢
while
playing a disc, to fast-forward
the file.
Track title (file name*)
(TAG lights up on the display)
Elapsed playing time and
Current file number
Press and hold
reverse the file.
4 while playing a disc, to
Clock and
Current file number
Note:
During this operation, you can only hear intermittent
sounds. (The elapsed playing time also changes
intermittently on the display.)
* If an MP3 file does not have ID3 tags, folder
name and file name appear. In this case, the
TAG indicator will not light up on the display.
To skip to the next or previous files
• When“TAG DISP”is set to“TAG OFF”
Press ¢
briefly while
playing, to skip ahead to the
beginning of the next file.
Each time you press the button
consecutively, the beginning of
the next files is located and
played back.
Folder name
(
(
lights up on the display)
File name
lights up on the display)
Press
4 briefly, while playing, to skip back
Elapsed playing time and
Current file number
to the beginning of the current file.
Each time you press the button consecutively,
the beginning of the previous files is located and
played back.
Clock and
Current file number
CONTINUED ON THE NEXT PAGE
25
To go to a particular file quickly within the
current folder (+10 and –10 buttons)
To go to a particular folder directly
IMPORTANT:
1
Press MODE to enter the functions mode
while playing a disc.
To directly select the folders using the number
button(s), it is required that folders are
assigned 2 digit numbers at the beginning of
their folder names. (This can only be done
during the recording of CD-Rs or CD-RWs.)
Ex.: If folder name is “01 ABC”
= Press 1 to go to Folder 01 ABC.
If folder name is “1 ABC,” pressing 1
does not work.
2
Press +10 or –10.
To skip 10 files* forwards to
the last file
If folder name is “12 ABC”
= Press and hold 6 (12) to go to Folder
12 ABC.
To skip 10 files* backwards to
the first file
* First time you press +10 or –10 button, the
file skips to the nearest higher or lower file
with a file number of multiple ten (ex. 10th,
20th, 30th).
Then each time you press the button, you
can skip 10 files (see “How to use the +10
and –10 buttons” below).
Press the number button corresponding to the
folder number to start playing the first file in the
selected folder.
• After the last file, the first file will be
selected, and vice versa.
• To select a folder number from 01 – 06:
Press 1 (7) – 6 (12) briefly.
• To select a folder number from 07 – 12:
Press and hold 1 (7) – 6 (12) for more than one
second.
How to use the +10 and –10 buttons
• Ex. 1: To select file number 32 while playing
file number 6
Notes:
• If
indicator flashes on the display after you
(Three times)
(Twice)
have selected a folder, it means that the folder does
not contain any MP3 files.
File 6
\ 10 \ 20 \ 30 \ 31 \ 32
• You cannot directly select a folder with a number
greater than 12.
• Ex. 2 :To select file number 8 while playing
file number 36
To select a particular file in a folder, press
¢
or
4 after selecting the folder.
(Three times)
(Twice)
File 36 \ 30 \ 20 \ 10 \ 9 \ 8
26
To skip to the next or previous folder
Active
indicator
Mode
Plays at random
Press 5 (up) while playing an
MP3 disc to skip to the next
folder.
Each time you press the button
consecutively, the next folder is
located (and the first file in the
folder starts playing, if recorded).
FLDR RND RND and
indicators
All files of the
current folder, then
files of the next
folder and so on.
light up.
DISC RND RND and
indicators
All files on the disc.
light up.
Press ∞ (down) while playing an MP3 disc to
skip back to the previous folder.
Each time you press the button consecutively,
the previous folder is located (and the first file in
the folder starts playing, if recorded).
To play back files repeatedly
(Track Repeat/Folder Repeat Play)
You can play back the current file or all the files
in the current folder repeatedly.
Note:
1 Press MODE to enter the
functions mode while playing an
MP3 disc.
If the folder does not contain any MP3 files, it is
skipped.
2 Press RPT (repeat), while
“MODE” is still flashing on the
display, so that “TRK RPT” or
“FLDR RPT” appears on the
display.
Selecting MP3 playback modes
To play back files at random
(Folder Random/Disc Random Play)
You can play back all files of the current folder or
all files on the MP3 disc at random.
Each time you press the button,
the repeat play mode changes
as follows:
1 Press MODE to enter the
functions mode while playing an
MP3 disc.
TRK RPT
Canceled
RPT indicator
FLDR RPT
2 Press RND (random), while
“MODE” is still flashing on the
display, so that “FLDR RND” or
“DISC RND” appears on the
display.
Each time you press the button,
the random play mode changes
as follows:
Ex.: When you select “TRK RPT”
Active
Mode
Plays repeatedly
FLDR RND
DISC RND
indicator
Canceled
TRK RPT RPT indicator The current (or
lights up.
specified) file.
RND and
(folder) indicators
FLDR RPT
and RPT All files of the
indicators
light up.
current (or
specified) folder.
Ex.: When you select “FLDR RND”
27
SOUND ADJUSTMENTS
Selecting preset sound modes
(C-EQ: custom equalizer)
Indication pattern changes for each
sound mode except for “USER.”
You can select a preset sound mode (C-EQ:
custom equalizer) suitable to the music genre.
Ex.: When you select “ROCK”
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
Indication
For:
Preset values
BAS TRE LOUD
1 Press MODE to enter the functions
USER
ROCK
(Flat sound)
00
00
OFF
ON
mode.
Rock or
+03
+01
disco music
CLASSIC Classical
music
+01
–02
OFF
POPS
Light music
+04
+02
+01
00
OFF
ON
2 Select the sound mode you want.
HIP HOP Funk or rap
music
Each time you press the
button, the sound modes
change as follows:
JAZZ
Jazz music
+02
+03
OFF
Note:
USER
ROCK
CLASSIC
You can adjust each sound mode to your preference.
Once you make an adjustment, it is automatically
stored for the currently selected sound mode. See
“Adjusting the sound” on page 29.
JAZZ
HIP HOP
ROCK
POPS
USER
CLASSIC
JAZZ
HIP HOP
POPS
28
1
*
When you adjust the bass, treble, or loudness, the
adjustment you have made is stored for the
currently selected sound mode (C-EQ) including
“USER.”
If you are using a two-speaker system, set the fader
level to “00.”
Normally the control dial works as the volume
control. So you do not have to select “VOL” to
adjust the volume level.
Depending on the amplifier gain control setting.
(See page 32 for details.)
Adjusting the sound
You can adjust the sound characteristics to your
preference.
2
3
*
1 Select the item you want to adjust.
*
Each time you press the
button, the adjustable items
change as follows:
4
*
2 Adjust the setting.
BAS
TRE
FAD
(bass)
(treble)
(fader)
To increase the level or
turn on the loudness
VOL
LOUD
BAL
(volume)
(loudness)
(balance)
To decrease the level or
turn off the loudness
Indication
To do:
Adjust the bass.
Range
BAS*1
TRE*1
FAD*2
BAL
–06 (min.)
|
Indication pattern changes as
you adjust the bass or treble.
+06 (max.)
Adjust the treble. –06 (min.)
|
+06 (max.)
Adjust the front
and rear speaker
balance.
R06 (Rear only)
Ex. 1: When you adjust “TRE” (treble)
|
F06 (Front only)
Adjust the left
and right speaker
balance.
L06 (Left only)
|
R06 (Right only)
LOUD*1
Boost low and high
frequencies to
produce a well-
balanced sound
at low volume
level.
Ex. 2: When you turn on the loudness
LOUD ON
|
LOUD OFF
3 Repeat steps 1 and 2 to adjust the
other items.
VOL*3
Adjust the volume. 00 (min.)
|
To reset each sound mode to the factory
settings, repeat the same procedure and
reassign the preset values listed in the table on
page 28.
30 or 50 (max.)*4
29
OTHER MAIN FUNCTIONS
Changing the general settings
(PSM)
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the setting.
You can change the items listed in the table on
page 31 by using the PSM (Preferred Setting
Mode) control.
Basic Procedure
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See page 31.)
2 Select the PSM item you want to
adjust.
Ex.: When you select “DIMMER”
3 Adjust the PSM item selected.
30
Preferred Setting Mode (PSM) items
• For detailed operations of each PSM items, refer to the pages listed in the table.
Factory-preset See
Indications
Selectable values/items
DEMO OFF DEMO ON
0 — 23 (1 — 12)
00 — 59
settings
page
DEMO
Display demonstration
Hour adjustment
DEMO ON
6
CLOCK H
CLOCK M
24H/12H
0 (0:00)
00 (0:00)
24H
Minute adjustment
24/12-hour time display
7
12H
OFF
24H
ON
AUTO ADJ Automatic clock setting
ON
17
AF
AF REG
AF-REG
Alternative frequency/
Regionalization reception
AF
12, 13
OFF
29 programme types
(see page 18)
OFF
PTY STBY PTY standby
OFF
14
17
TA VOL
Traffic announcement
volume
VOL 00 — VOL 30 or 50*
VOL 20
OFF
OFF
ON
ON
OFF
OFF
17
32
P-SEARCH Programme search
DIMMER
TEL
Dimmer mode
OFF
MUTING 1
Telephone muting
OFF
32
32
MUTING 2
SCROLL
Scroll mode
Tag display
ONCE
AUTO
ONCE
OFF
TAG DISP
TAG OFF
TAG ON
TAG ON
32
32
AMP GAIN Amplifier gain control
LOW PWR
HIGH PWR
HIGH PWR
* Depending on the amplifier gain control setting. (See page 32 for details.)
31
To select the dimmer mode—DIMMER
You can dim the display at night (according to
your preference).
When shipped from the factory, dimmer is
deactivated.
To turn the tag display on or off
—TAG DISP
An MP3 file can contain file information called
“ID3 Tag” where its album name, performer, track
title, etc. are recorded.
There are two versions–ID3v1 (ID3 Tag version
1) and ID3v2 (ID3 Tag version 2). If both ID3v1
and ID3v2 are recorded on a disc, ID3v2
information will be shown.
• OFF:
• ON:
Cancels the dimmer.
Activates the dimmer.
When shipped from the factory, “TAG ON” is
selected.
To select the telephone muting—TEL
• TAG ON:
Turns on the ID3 tag display while
playing MP3 files.
This mode is used when a cellular phone system
is connected. Depending on the phone system
used, select either “MUTING 1” or “MUTING 2”
whichever mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.
• If an MP3 file does not have ID3
tags, folder name and file name
appear.
• TAG OFF: Turns off the ID3 tag display while
playing MP3 files. (Only the folder
name and file name can be
shown.)
• MUTING 1: Select if this setting can mute the
sounds while using the cellular
phone.
• MUTING 2: Select if this setting can mute the
sounds while using the cellular
phone.
To select the amplifier gain control
—AMP GAIN
• OFF:
Cancels the telephone muting.
You can change the maximum volume level of
this unit. When the maximum power of the
speakers is less than 50 W, select “LOW PWR”
to prevent them from being damaged.
When shipped from the factory, “HIGH PWR” is
selected.
To select the scroll mode—SCROLL
You can select the scroll mode for the disc
information (when the entire text cannot be
shown at once).
• LOW PWR: You can adjust the volume level
from “VOL 00” to “VOL 30.”
When shipped from the factory, scroll mode is set
to “ONCE.”
Note:
• ONCE:
• AUTO:
Scrolls only once.
If you change the setting from
“HIGH PWR” to “LOW PWR” while
listening at a volume level more than
30, the unit automatically changes the
volume level to “VOL 30.”
Repeats the scroll (5-second
intervals in between).
Cancels scroll mode.
• OFF:
Note:
Even if the scroll mode is set to “OFF,” you can scroll
the display by pressing DISP (display) for more than
one second.
• HIGH PWR:You can adjust the volume level
from “VOL 00” to “VOL 50.”
32
Attaching the control panel
Detaching the control panel
1 Insert the left side of the control
panel into the groove on the panel
holder.
You can detach the control panel when leaving
the car.
When detaching or attaching the control panel,
be careful not to damage the connectors on the
back of the control panel and on the panel
holder.
Detaching the control panel
Before detaching the control panel, be sure to
turn off the power.
1 Unlock the control panel.
2 Press the right side of the control
panel to fix it to the panel holder.
2 Lift and pull the control panel out of
the unit.
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe the
connectors with a cotton swab or cloth moistened
with alcohol, being careful not to damage the
connectors.
3 Put the detached control panel into
the provided case.
Connectors
33
USING THE REMOTE CONTROLLER
This unit can be remotely controlled as instructed
3. Return the battery holder.
here (with an optionally purchased remote
controller). We recommend that you use remote
controller RM-RK50 or RM-RK60 with your unit.
(Ex.: When you are using RM-RK60)
Insert again the battery holder by pushing it
until you hear a clicking sound.
(back side)
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the main unit. Make sure there is no
obstacle in between.
Remote sensor
WARNING:
• Store the battery in a place where children
cannot reach.
If a child accidentally swallows the battery,
consult a doctor immediately.
• Do not recharge, short, disassemble, or heat the
battery or dispose of it in a fire.
Doing any of these things may cause the battery
to give off heat, crack, or start a fire.
• Do not leave the battery with other metallic
materials.
Doing this may cause the battery to give off
heat, crack, or start a fire.
• When throwing away or saving the battery,
wrap it in tape and insulate; otherwise, the
battery may start to give off heat, crack, or start
a fire.
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
Installing the battery
When the controllable range or effectiveness
of the remote controller decreases, replace
the battery.
1. Remove the battery holder.
1) Push out the battery holder in the
direction indicated by the arrow using a
ball point pen or a similar tool.
• Do not poke the battery with tweezers or similar
tools.
Doing this may cause the battery to give off
heat, crack, or start a fire.
2) Remove the battery holder.
CAUTION:
DO NOT leave the remote controller in a place
(such as dashboards) exposed to direct sunlight
for a long time. Otherwise, it may be damaged.
(back side)
2. Place the battery.
Slide the battery into the holder with the
+ side facing upwards so that the battery
is fixed in the holder.
Lithium coin
battery (product
number: CR2025)
34
3 • Selects the preset stations while listening to
the radio.
Location of the buttons
Each time you press the button, the preset
station number increases, and the selected
station is tuned in.
RM-RK60
• Skips to the first file of the previous folder
while listening to an MP3 disc.
Each time you press the button, you can
move to the previous folder and start playing
the first file.
4 Selects the sound mode (C-EQ: custom
equalizer).
Each time you press the button, the sound
mode (C-EQ) changes.
S
5 • Selects the band while listening to the radio.
Each time you press the button, the band
changes.
• Skips to the first file of the next folder while
listening to an MP3 disc.
Each time you press the button, you can
move to the next folder and start playing the
first file.
6 Selects the source.
1 • Turns on the unit if pressed when the unit is
turned off.
Each time you press the button, the source
changes.
• Turns off the unit if pressed and held until
“SEE YOU” appears on the display.
• Drops the volume level in a moment if
pressed briefly.
7 Functions the same as the control dial on the
main unit.
Note: These buttons do not function for the
preferred setting mode adjustment.
Press again to resume the volume.
2 • Searches for stations while listening to the
radio.
• Fast-forwards or reverses the track/file if
pressed and held while listening to a disc.
• Skips to the beginning of the next track/file
or goes back to the beginning of the current
(or previous) tracks/files if pressed briefly
while listening to a disc.
KD-G401 is equipped with the steering wheel
remote control function.
If your car is equipped with the steering wheel
remote controller, you can operate this unit
using the controller.
• See the Installation/Connection Manual
(separate volume) for connection to utilize
this function.
35
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Causes
Remedies
• Sound cannot be heard
from the speakers.
The volume level is set to the
minimum level.
Adjust it to the optimum level.
Connections are incorrect.
Check the cords and
connections.
• This unit does not work
at all.
The built-in microcomputer may
have functioned incorrectly due
to noise, etc.
While holding SEL (select),
press
(standby/on
attenuator) for more than
2 seconds to reset the unit. (The
clock setting and preset stations
stored in memory are erased.)
(See page 2.)
• SSM (Strong-station
Sequential Memory)
automatic preset does
not work.
Signals are too weak.
Store stations manually.
• Static noise while
listening to the radio.
The aerial is not connected
firmly.
Connect the aerial firmly.
Insert the CD correctly.
• CD automatically ejects.
CD is inserted upside down.
• CD-R/CD-RW cannot be CD-R/CD-RW is not finalized.
played back.
• Tracks on the CD-R/CD-
• Insert a finalized CD-R/
CD-RW.
• Finalize the CD-R/CD-RW
with the component which
you used for recording.
RW cannot be skipped.
• CD can be neither
played back nor ejected.
CD is locked.
Unlock the CD.
(See page 22.)
The CD player may have
functioned incorrectly.
While holding
(standby/on attenuator), press
0 (eject) for more than
2 seconds. Be careful not to
drop the CD when it is ejected.
• CD sound is sometimes
interrupted.
You are driving on rough roads.
Stop playback while driving on
rough roads.
CD is scratched.
Change the CD.
Connections are incorrect.
Check the cords and
connections.
• “NO DISC” appears on
the display.
No CD in the loading slot.
CD is inserted incorrectly.
Insert a CD into the loading slot.
Insert the CD correctly.
36
Symptoms
Causes
Remedies
• Disc cannot be played
back.
No MP3 files are recorded on
the disc.
Change the disc.
MP3 files do not have the
extension code <.mp3> in their
file names.
Add the extension code
<.mp3> to their file names.
MP3 files are not recorded in
the format compliant with ISO
9660 Level 1, Level 2, Romeo,
or Joliet.
Change the disc.
(Record MP3 files using a
compliant application.)
• Noise is generated.
The file played back is not an
MP3 file (although it has the
extension code <.mp3>).
Skip to another file or change
the disc. (Do not add the
extension code <.mp3> to non-
MP3 files.)
• A longer readout time is
required (“CHECK”
keeps flashing on the
display).
Readout time varies due to the
complexity of the folder/file
configuration.
Do not use too many hierarchies
and folders. Also, do not record
any other types of audio tracks
together with MP3 files.
• Files cannot be played
back as you have
Playback order is determined
when the files are recorded.
intended them to play.
• Elapsed playing time is
not correct.
This sometimes occurs during
play. This is caused by how the
files are recorded on the disc.
•
indicator flashes on
the display.
The current folder does not
contain any MP3 file.
Select another folder.
• “NO FILES” appears on
the display.
The current disc does not
contain any MP3 file.
Insert a disc that contains MP3
files.
• Correct characters are
This unit can only display
not displayed (e.g. album alphabets (capital: A–Z),
name).
numbers, and a limited number
of symbols.
About mistracking:
Mistracking may result from driving on extremely rough roads. This does not damage the unit and the disc,
but will be annoying.
We recommend that you stop disc play while driving on such rough roads.
37
MAINTENANCE
When playing a CD-R or CD-RW
Handling discs
Before playing back CD-Rs or CD-RWs, read
their instructions or cautions carefully.
• Use only “finalized” CD-Rs or CD-RWs.
• Some CD-Rs or CD-RWs may not be played
back on this unit because of their disc
characteristics, and for the following reasons:
– Discs are dirty or scratched.
– Moisture condensation on the lens inside the
unit.
– The pickup lens inside the unit is dirty.
• CD-RWs may require a longer readout time
since the reflectance of CD-RWs is lower than
that of regular CDs.
• CD-Rs or CD-RWs are susceptible to high
temperatures or high humidity, so do not leave
them inside your car.
• Do not use following CD-Rs or CD-RWs:
– Discs with stickers, labels, or protective seal
stuck to the surface.
This unit has been designed to reproduce CDs,
CD-Rs (Recordable), CD-RWs (Rewritable), and
CD Texts.
• This unit is also compatible with MP3 discs.
How to handle discs
When removing a disc
from its case, press down
the center holder of the case
and lift the disc out, holding
it by the edges.
Center holder
• Always hold the disc by the edges. Do not
touch its recording surface.
When storing a disc into its case, gently insert
the disc around the center holder (with the
printed surface facing up).
• Make sure to store discs into the cases after
use.
– Discs on which labels can be directly printed
by an ink jet printer.
To keep discs clean
Using these discs under high temperatures or
high humidity may cause malfunctions or
damage to discs. For example,
– Stickers or labels may shrink and warp a
disc.
– Stickers or labels may be peeled off so discs
cannot be ejected.
– Print on discs may get sticky.
A dirty disc may not be played
correctly. If a disc does become
dirty, wipe it with a soft cloth in a
straight line from center to edge.
To play new discs
New discs may have some rough
spots around the inner and outer
edges. If such a disc is used, this
unit may reject the disc.
To remove these rough spots, rub
the edges with a pencil or ball-point pen, etc.
Read instructions or cautions about labels and
printable discs carefully.
CAUTIONS:
• Do not insert 8 cm discs (single CDs) into the
loading slot. (Such discs cannot be ejected.)
• Do not insert any disc of unusual shape—like a
heart or flower; otherwise, it will cause a
malfunction.
• Do not expose discs to direct sunlight or any
heat source or place them in a place subject to
high temperature and humidity. Do not leave
them in a car.
Moisture condensation
Moisture may condense on the lens inside the
CD player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may
malfunction. In this case, eject the disc and leave
the unit turned on for a few hours until the
moisture evaporates.
• Do not use any solvent (for example,
conventional record cleaner, spray, thinner,
benzine, etc.) to clean discs.
Sticker
Stick-on
label
Sticker
Disc
Warped
disc
residue
38
SPECIFICATIONS
CD PLAYER SECTION
AUDIO AMPLIFIER SECTION
Maximum Power Output:
Type: Compact disc player
Front:
Rear:
50 W per channel
50 W per channel
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Continuous Power Output (RMS):
Number of channels: 2 channels (stereo)
Frequency Response: 5 Hz to 20 000 Hz
Front:
19 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than
0.8% total harmonic distortion.
19 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than
0.8% total harmonic distortion.
Dynamic Range:
96 dB
Signal-to-Noise Ratio: 98 dB
Wow and Flutter: Less than measurable limit
MP3 decoding format:
Rear:
MPEG 1/2 Audio Layer 3
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Max. Bit Rate:
320 Kbps
Bass:
Treble:
10 dB at 100 Hz
10 dB at 10 kHz
GENERAL
Power Requirement:
Operating Voltage:
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
DC 14.4 V (11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature:
0°C to +40°C
2.0 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
Dimensions (W × H × D):
Installation Size (approx.):
182 mm × 52 mm × 150 mm
Panel Size (approx.):
TUNER SECTION
Frequency Range:
FM:
AM:
87.5 MHz to 108.0 MHz
(MW) 522 kHz to 1 620 kHz
(LW) 144 kHz to 279 kHz
188 mm × 58 mm × 11 mm
Mass (approx.):
[FM Tuner]
1.3 kg (excluding accessories)
Usable Sensitivity:
11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Design and specifications are subject to change
without notice.
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 30 dB
Capture Ratio: 1.5 dB
[MW Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
[LW Tuner]
Sensitivity: 50 µV
39
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Haben Sie PROBLEME mit dem Betrieb?
Bitte setzen Sie Ihr Gerät zurück
Siehe Seite Zurücksetzen des Geräts
Vous avez des PROBLÈMES de fonctionnement?
Réinitialisez votre appareil
Référez-vous à la page intitulée Comment réinitialiser votre appareil
Hebt u PROBLEMEN met de bediening?
Stel het apparaat terug
Zie de pagina met de paragraaf Het apparaat terugstellen
1103KKSMDTJEIN
EN, GE, FR, NL
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
KD-G401
Installation/Connection Manual
Einbau/Anschlußanleitung
Manuel d’installation/raccordement
Handleiding voor installatie/aansluiting
GET0195-005A
[E/EX]
1103KKSMDTJEIN
EN, GE, FR, NL
ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
This unit is designed to operate on 12 V DC,
NEGATIVE ground electrical systems. If your
vehicle does not have this system, a voltage
inverter is required, which can be purchased at
JVC IN-CAR ENTERTAINMENT dealers.
Dieses Gerät ist für einen Betrieb in
Cet appareil est conçu pour fonctionner sur des
sources de courant continu de 12 V à masse
NEGATIVE. Si votre véhicule n’offre pas ce type
d’alimentation, il vous faut un convertisseur de
tension, que vous pouvez acheter chez un
revendeur d’autoradios JVC.
Dit apparaat mag worden gebruikt bij elektrische
systemen die werken op 12 V gelijkstroom met
negatieve aarding. Als uw auto niet is uitgerust
met een dergelijk systeem, is een spanningsomzetter
vereist. Dit instrument kan worden aangeschaft bij
JVC car audio dealers.
elektrischen Anlagen mit 12 V Gleichstrom
und (–) Erdung ausgelegt. Verfügt Ihr
Fahrzeug nicht über diese Anlage, ist ein
Spannungsinverter erforderlich, der bei JVC
Autoradiohändler erworben werden kann.
Teileliste für den Einbau und Anschluß
Die folgenden Teile werden zusammen mit
diesem Gerät geliefert.
Lijst van onderdelen die u bij
installatie en aansluiting nodig hebt
De volgende onderdelen worden bij het apparaat
geleverd.
Liste des pièces pour l’installation et
raccordement
Les pièces suivantes sont fournies avec cet
appareil.
Parts list for installation and
connection
The following parts are provided for this unit.
After checking them, please set them correctly.
Nach ihrer Überprüfung, die Teile richtig einsetzen.
Installeer ze op de juiste wijze, nadat u ze hebt
gecontroleerd.
Après vérification, veuillez les placer correctement.
D
A / B
C
Trim plate
Frontrahmen
Plaque d’assemblage
Sierplaat
Hard case/Control panel
Etui/Schalttafel
Etui de transport/Panneau de
commande
Sleeve
Halterung
Manchon
Huis
Behuizing/Bedieningspaneel
E
F
G
Power cord
Stromkable
Cordon d’alimentation
Stroomkabel
Washer (ø5)
Unterlegscheibe (ø5)
Rondelle (ø5)
Sluitring (ø5)
Lock nut (M5)
Sicherungsmutter (M5)
Ecrou d’arrêt (M5)
Contra-moer (M5)
H
I
J
Mounting bolt (M5 x 20 mm)
Befestigungsschraube (M5 x 20 mm)
Boulon de montage (M5 x 20 mm)
Bevestigingsbout (M5 x 20 mm)
Rubber cushion
Gummipuffer
Amortisseur en caoutchouc
Rubberdop
Handles
Griffe
Poignées
Hendels
INSTALLATION
EINBAU
INSTALLATION (MONTAGE
INSTALLATIE (INBOUW IN
(IN-DASH MOUNTING)
The following illustration shows a typical
(IM ARMATURENBRETT)
Die folgende Abbildung zeigt einen typischen
DANS LE TABLEAU DE BORD) HET DASHBOARD)
L’illustration suivante est un exemple
d’installation typique. Si vous avez des
Op de volgende afbeelding kunt u zien hoe de
installation. If you have any questions or require Einbau. Bei irgendwelchen Fragen oder wenn
installatie, normaal gesproken, in zijn werk gaat.
Neem bij vragen of voor meer bijzonderheden over
inbouwpakketten contact op met uw JVC car audio
dealer of een dealer of een bedrijf dat
information regarding installation kits, consult
your JVC IN-CAR ENTERTAINMENT dealer or
a company supplying kits.
• If you are not sure how to install this unit
correctly, have it installed by a qualified
technician.
Sie Informationen hinsichtlich des Einbausatzes questions ou avez besoin d’information sur des
brauchen, wenden Sie sich an ihren JVC
Autoradiohändler oder ein Unternehmen das
diese Einbausätze vertreibt.
• Sind Sie sich über den richtigen Einbau des
Geräts nicht sicher, lassen Sie es von einem
qualifizierten Techniker einbauen.
kits d’installation, consulter votre revendeur
d’autoradios JVC ou une compagnie
d’approvisionnement.
• Si l’on n’est pas sûr de pouvoir installer
correctement cet appareil, le faire installer par
un technicien qualifié.
inbouwpakketten levert.
• Als u niet zeker weet hoe u dit apparaat moet
installeren, kunt u dit beter door een daartoe
gekwalificeerde technicus laten doen.
4
!
2
1
Do the required electrical connections.
Nehmen Sie die erforderlichen
elektrischen Anschlüsse vor.
Réalisez les connexions électriques.
Breng de vereiste elektrische verbindingen
tot stand.
B
D
184 mm
I
53 mm
C
~
Ÿ
H
3
J
*1 When you stand the unit, be careful
not to damage the fuse on the rear.
*1 Beim Aufstellen des Geräts darauf
achten, daß die Sicherung auf der
Rückseite nicht beschädigt wird.
*1 Lorsque vous mettez l’appareil à la
verticale, faire attention de ne pas
endommager le fusible situé sur
⁄
@
Bend the appropriate tabs to hold the
sleeve firmly in place.
Die geeigneten Zapfen biegen, um
die Manschette sicher festzuhalten.
Tordez les languettes appropriées
pour maintenir le manchon en place.
Buig de vereiste lipjes zodat de huls goed
op zijn plaats wordt gehouden.
¤
C
l’arrière.
D
1
*
Wanneer u het apparaat rechtop zet,
moet u erop letten dat u de zekering
aan de achterkant niet beschadigt.
*1
B
1
Removing the unit
Before removing the unit, release the rear
section.
Ausbau des Geräts
Vor dem Ausbau des Geräts den hinteren Teil
freigeben.
Retrait de l’appareil
Avant de retirer l’appareil, libérer la section
arrière.
Verwijderen van het apparaat
Voordat u het apparaat verwijdert, moet u het
achtergedeelte losmaken.
Insert the two handles, then pull them as illustrated so that the
unit can be removed.
Die beiden Handgriffe einsetzen und dann ziehen wie in der
Abbildung gezeigt, so daß das Gerät entfernt werden kann.
Insérez les deux poignées, puis tirez de la façon illustrée de
façon à retirer l’appareil.
1
2
3
B
D
Plaats de twee hendels en trek ze vervolgens zoals afgebeeld naar
voren zodat het toestel kan worden verwijderd.
J
When using the optional stay / Beim Verwenden der
Anker-Option / Lors de l’utilisation du hauban en option /
Wanneer u de steun gebruikt (facultatief)
When installing the unit without using the sleeve / Beim Einbau des Geräts ohne
Halterung / Lors de l’installation de l’appareil scans utiliser de manchon / Wanneer u
het apparaat zonder huis installeert
In a Toyota for example, first remove the car radio and install the unit in its place.
Zum Beispiel in einem Toyota zuerst das Autoradio ausbauen und dann das Gerät an seinem Platz einbauen.
Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.
Voorbeeld: Bij een Toyota moet u eerst de autoradio verwijderen en daarna het apparaat installeren.
Fire wall
Feuerwand
Cloison
Brandscherm
Stay (option)
Flat type screws (M5 x 8 mm)*
* Not included with this unit.
Anker (Option)
Hauban (en option)
Steun (facultatief)
Senkkopfschrauben (M5 x 8 mm)*
* Nicht Teil dieses Geräts.
* Non fourni avec cet appareil.
Vis à tête plate (M5 x 8 mm) *
Platkopschroeven (M5 x 8 mm)*
F
H
* Niet meegeleverd.
G
Dashboard
Bracket*
Konsole*
Support *
Armaturenbrett
Tableau de bord
Dashboard
Screw (option)
Schraube (Option)
Vis (en option)
Flat type screws (M5 x 8 mm)*
Senkkopfschrauben (M5 x 8 mm)*
Vis à tête plate (M5 x 8 mm) *
Platkopschroeven (M5 x 8 mm)*
Console*
Pocket
Taschen
Poche
Zak
Schroef (facultatief)
C
Bracket*
Konsole*
Support *
Console*
Note
:When installing the unit on the mounting bracket, make sure to use the 8 mm-long screws. If longer
screws are used, they could damage the unit.
Install the unit at an angle of less than 30˚.
Stellen Sie das Gerät mit einem Winkel von
weniger als 30˚ auf.
Installez l’appareil avec un angle de moins de
30˚.
Hinweis
:Beim Anbringen des Gerät an der Konsole sicherstellen, daß 8 mm lange Schrauben verwendet
werden. Werden längere Schrauben verwendet, können sie das Gerät beschädigen.
Remarque :Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des vis d’une
longueur de 8 mm. Si des vis plus longues sont utilisées, elles peuvent endommager l’appareil.
Opmerking :Wanneer u het apparaat aan de bevestigingsklem vastmaakt, moet u de 8 mm lange schroeven gebruiken. Als u
langere schroeven gebruikt, kan het apparaat worden beschadigd.
Installeer het toestel met een hoek kleiner dan 30˚.
ELECTRICAL CONNECTIONS ELEKTRISCHE ANSCHLÜSSE RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN
To prevent short circuits, we recommend that
you disconnect the battery’s negative terminal
and make all electrical connections before
installing the unit.
Zur Vermeidung von Kurzschlüssen empfehlen
wir, daß Sie den negativen Batterieanschluß
abtrennen und alle elektrischen Anschlüsse
herstellen, bevor das Gerät eingebaut wird.
Pour éviter tout court-circuit, nous vous
recommandons de débrancher la borne
négative de la batterie et d’effectuer tous les
raccordements électriques avant d’installer
Om kortsluiting te voorkomen adviseren wij u om de
minpool van de accu los te maken en alle elektrische
verbindingen tot stand te brengen voordat u het
apparaat in de auto installeert.
• Be sure to ground this unit to the car’s
chassis again after installation.
• Sicherstellen,daß das Gerät nach dem Einbau l’appareil.
• Aard dit toestel beslist weer op het chassis
van de auto na het installeren.
a Chassis des Fahrzeugs geerdet wird.
• Assurez-vous de raccorder de nouveau la
mise à la masse de cet appareil au châssis
de la voiture après l’installation.
Notes:
Hinweise:
Opmerkingen:
• Replace the fuse with one of the specified
rating. If the fuse blows frequently, consult your
JVC IN-CAR ENTERTAINMENT dealer.
• It is recommended to connect to the speakers
• Die Sicherung mit einer der entsprechenden
Nennleistung ersetzen. Brennt die Sicherung
häufig durch, wenden Sie sich an ihren JVC
Autoradiohändler.
• Vervang de zekering door een exemplaar met het
aangegeven vermogen. Als de zekering vaak
doorslaat, moet u uw JVC car audio dealer
raadplegen.
• Sluit bij voorkeur luidsprekers met een hoger
maximaal vermogen dan 50 W (zowel achter als
voor, met een impedantie van 4 Ω t/m 8 Ω) aan.
Indien het maximale vermogen lager dan 50 W is,
moet u “AMP GAIN” in de andere stand stellen
zodat de luidsprekers niet kunnen worden
beschadigd (zie bladzijde 32 van de
Remarques:
• Remplacer le fusible par un de la valeur
précisée. Si le fusible saute souvent, consulter
votre revendeur d’autoradios JVC.
with maximum power of more than 50 W (both • Es wird empfohlen, Lautsprecher mit einer
at the rear and at the front, with an impedance
of 4 Ω to 8 Ω). If the maximum power is less
than 50 W, change “AMP GAIN” setting to
prevent the speakers from being damaged
(see page 32 of the INSTRUCTIONS).
• To prevent short-circuit, cover the terminals of
the UNUSED leads with insulating tape.
• The heat sink becomes very hot after use. Be
careful not to touch it when removing this unit.
Maximalleistung von mehr als 50 W
anzuschließen (sowohl hinten als auch vorne,
mit einer Impedanz von 4 Ω bis 8 Ω). Wenn die
Maximalleistung weniger als 50 W beträgt,
stellen Sie „AMP GAIN“ anders ein, um Schäden
an den Lautsprechern zu vermeiden (siehe Seite
32 der BEDIENUNGSANLEITUNG).
• Zur Vermeidung eines Kurzschlusses die
Anschlußklemmen der NICHT
VERWENDETEN Leitungen mit
• Il est recommandé de connecter des
enceintes avec une puissance de plus de 50
W (les enceintes arrière et les enceintes
avant, avec une impédance comprise entre
4 Ω et 8 Ω). Si la puissance maximum est
inférieure à 50 W, changez “AMP GAIN” pour
éviter d’endommager vos enceintes (voir page
32 du MANUEL D’INSTRUCTIONS).
• Pour éviter les court-circuits, couvrir les
bornes des fils qui ne sont PAS UTILISÉS
avec de la bande isolante.
GEBRUIKSAANWIJZING).
• Om kortsluiting te voorkomen, moet u de
aansluitklemmen van ONGEBRUIKTE gekleurde
draden met isolatieband bedekken.
• De warmte-opnemer kan na gebruik erg heet
worden. Raak de warmte-opnemer niet aan
wanneer u dit apparaat van zijn plaats haalt.
Isolierklebeband umwickeln.
Heat sink
Abstrahlblech
Dissipateur de chaleur
Warmte-opnemer
• Das Abstrahlblech wird nach dem Gebrauch
sehr heiß. Beim Ausbau des Geräts darauf
achten, das Abstrahlblech nicht zu berühren.
• Le dissipateur de chaleur devient très chaud
après usage. Faire attention de ne pas le
toucher en retirant cet appareil.
TROUBLESHOOTING
FEHLERSUCHE
• Die Sicherung brennt durch.
* Sind die roten und schwarzen Leitungen
richtig angeschlossen?
EN CAS DE DIFFICULTES
PROBLEMEN OPLOSSEN
• The fuse blows.
• Le fusible saute.
• De zekering slaat door.
* Are the red and black leads connected
correctly?
* Les fils rouge et noir sont-ils racordés
correctement?
* Zijn de rode en de zwarte draden op de juiste
manier aangesloten?
• Stromversorgung kann nicht eingeschaltet
werden.
* Ist die gelbe Leitung angeschlossen?
• Power cannot be turned on.
* Is the yellow lead connected?
• L’appareil ne peut pas être mise sous
tension.
* Le fil jaune est-elle raccordée?
• De stroom kan niet worden ingeschakeld.
* Is de gele draad aangesloten?
• No sound from the speakers.
* Is the speaker output lead short-circuited?
• Er komt geen geluid uit de speakers.
* Is de uitgaande speakerdraad kortgesloten?
• Kein Ton aus den Lautsprechern.
• Pas de son des enceintes.
* Le fil de sortie d’enceinte est-il court-circuité?
*
Ist die Lautsprecherausgangsleitung
• Sound is distorted.
• Het geluid wordt vervormd.
kurzgeschlossen?
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers
grounded in common?
• Le son est déformé.
* Is de uitgaande speakerdraad geaard?
* Zijn de “–” polen van de linker- en de
rechterspeakers gemeenschappelijk geaard?
• Ton verzerrt.
* Le fil de sortie d’enceinte est-il à la masse?
* Les bornes “–” des enceintes gauche et droit
sont-elles mises ensemble à la masse?
* Ist die Lautsprecherausgangsleitung geerdet?
* Sind die (–) Anschlußklemmen der linken und
rechten Lautsprecher zusammen geerdet?
• Noise interfere with sounds.
* Is the rear ground terminal connected to the
car’s chassis using shorter and thicker cords?
• Geluid wordt door ruis gestoord.
* Is de aarde-aansluiting achter met gebruik van
kortere en dikkere snoeren met het chassis van de
auto verbonden?
• Interférence avec les sons
• Störgeräusche im Klang.
* La prise arrière de mise à la terre est-elle
connectée au châssis de la voiture avec un
cordon court et épais?
* Ist die hintere Erdungsklemme mit kürzeren
und dickeren Kabeln an das Fahrzeugchassis
angeschlossen?
• Unit becomes hot.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers
grounded in common?
• Het apparaat raakt verhit.
• L’appareil devient chaud.
* Is de uitgaande speakerdraad geaard?
* Zijn de “–” polen van de linker- en de
rechterspeakers gemeenschappelijk geaard?
• Gerät wird heiß.
* Le fil de sortie d’enceinte est-il à la masse?
* Les bornes “–” des enceintes gauche et droit
sont-elles mises ensemble à la masse?
* Ist die Lautsprecherausgangsleitung geerdet?
* Sind die (–) Anschlußklemmen der linken und
rechten Lautsprecher zusammen geerdet?
2
ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
Typical Connections / Typische Anschlüsse / Raccordements typiques / Normale verbindingen
A
Before connecting: Check the wiring in the
vehicle carefully. Incorrect connection may
cause serious damage to this unit.
The leads of the power cord and those of the
connector from the car body may be different in Die Leiter des Stromkabels und die Leiter des
Vor dem Anschließen: Die Verdrahtung im
Fahrzeug sorgfältig überprüfen. Falsche
Anschlüsse können ernsthafte Schäden am
Gerät hervorrufen.
Avant de commencer la connexion: Vérifiez
attentivement le câblage du véhicule. Une
connexion incorrecte peut endommager
sérieusement l’appareil.
Le fil du cordon d’alimentation et ceux des
connecteurs du châssis de la voiture peuvent
être différents en couleur.
Alvorens de verbindingen tot stand te
brengen: Moet u de bedrading in de auto
zorgvuldig. Het apparaat kan door verkeerde
verbindingen ernstige schade oplopen.
De draden van het stroomsnoer verschillen mogelijk
van kleur metde aansluitingen op het chassis van de
auto.
color.
Anschlusses im Fahrzeug können sich farblich
unterscheiden.
1 Connect the colored leads of the power cord
in the order specified in the illustration
below.
1 Die farbigen Adern des Stromkabels in der
Reihenfolge anschließen, wie in der
Abbildung unten gezeigt.
1 Connectez les fils colorés du cordon
d’alimentation dans l’ordre spécifié sur
l’illustration ci-dessous.
1 Verbind de gekleurde draden van het
stroomsnoer in de afbeelding hieronder
aangegeven volgorde.
2 Connect the aerial cord.
2 Das Antennenkabel anschließen.
3 Die Kabelbäume am Gerät anschließen.
Hinweis: Verfügt Ihr Fahrzeug nicht über eine
Zubehöranschlußklemme, die Sicherung von
2 Connectez le cordon d’antenne.
2 Sluit de antenne aan.
3 Finally connect the wiring harness to the unit.
Note: If your vehicle does not have any
3 Finalement, connectez le faisceau de fils à
3 Verbind de draadbundel daarna met het apparaat.
accessory terminal, move the fuse from the
fuse position 1 (initial position) to fuse position
l’appareil.
Opmerking: Als uw voertuig niet beschikt over
Remarque: Si votre véhicule ne possède pas de een aansluitklem, moet u de zekering verplaatsen
2, and connect the red lead (A7) to the positive der 1. Sicherungsposition (Erstposition) in die 2. borne accessoire, déplacez le fusible de la
van stand 1 (beginstand) naar stand 2 en moet u de
rode draad (A7) met de pluspool (+) van de accu
verbinden.
(+) battery terminal.
Sicherungsposition versetzen, die rote Leitung
position de fusible 1 (position originale) à la
position de fusible 2 et connectez le fil rouge
(A7) à la borne positive (+) de la batterie.
• Le fil jaune (A4) n’est pas utilisé dans ce cas.
• The yellow lead (A4) is not used in this case. (A7) an der (+) Batterieanschlußklemme
• In dit geval wordt de gele draad (A4) niet gebruikt.
anschließen.
• Die gelbe Leitung (A4) wird in diesem Fall
nicht verwendet.
To steering wheel remote controller (see diagram
An Lenkradfernbedienung (siehe Schaltplan
Pour la télécommande de volant (voir le diagramme
)
Line out (see diagram
Schutz kappen Signalausgang
)
)
B1 B3 B5 B7
)
(siehe Schaltplan
Sortie de ligne
)
Fuse position 2 / 2. Sicherungsposition / Position de fusible 2 / Zekering, stand 2
B2 B4 B6 B8
A5 A7
Naar stuurwiel-afstandsbediening (zie schema
)
(voir le diagramme
Uitgang (zie schema
)
)
Fuse position 1 / 1. Sicherungsposition /Position de fusible 1 / Zekering, stand 1
A2 A4
A8
15 A fuse
Rear ground terminal
Hintere Erdungscan–
schlußklemme
15 A Sicherung
Fusible 15 A
Zekering 15 A
B1 B3 B5 B7
B2 B4 B6 B8
1
A5 A7
Borne arrière de masse
A2 A4
A8
Massaklem aan de achterkant
1
*
*
*
*
Not included for this unit
1
1
1
Wird nicht mit Gerät mitgeliefert
Non fourni avec cet appareil
Niet bij het apparaat inbegrepen
Ignition switch
Zündschalter
Interrupteur d’allumage
Ontstekingsschakelaar
Black
Schwarz
Noir
1
To metallic body or chassis of the car
*
A8
Zwart
Zur metallenen Karosserie oder zum Fahrwerk des Autos
Vers corps métallique ou châssis de la voiture
Naar metalen ondergrond of chassis van de auto
Aerial terminal
1
*
1
Antennenanschlußklemme
Borne de l’antenne
Aansluitpunt antenne
3
2
To a live terminal in the fuse block connecting to the car battery
(bypassing the ignition switch) (constant 12 V)
Zur einer stromführenden Anschlußklemme im Sicherungsblock zum
Anschließen an die Autobatterie (Umgehen des Zündschalters)
(konstant 12 V)
Yellow*2
Gelb*2
Jaune *2
Geel *2
A4
2
À une borne sous tension du porte-fusible connectée à la batterie de
la voiture (en dérivant l’interrupteur d’allumage) (12 V constant)
Naar een onder spanning staande aansluitklem in het zekeringblok die is
aangesloten op de accu van de auto (u passeert de ontstekingsschakelaar)
(constant 12 V)
Fuse block
Sicherungsblock
Porte-fusible
Zekeringblok
Red
Rot
Rouge
Rood
To an accessory terminal in the fuse block
Zur einer Zubehöranschlußklemme im Sicherungsblock
Vers borne accessoire du porte-fusible
Naar een aansluitklem in het zekeringblok
A7
3
2
*
Before checking the operation of this unit prior to
installation, this lead must be connected, otherwise power
cannot be turned on.
Vor der Überprüfung der Funktionsfähigkeit des Geräts
vor dem Einbau, muß diese Leitung angeschlossen
werden, da sonst die Stromversorgung nicht
eingeschaltet werden kann.
Pour vérifier le fonctionnement de cet appareil avant
installation, ce fil doit être raccordé, sinon l’appareil ne
peut pas être mis sous tension.
Blue with white stripe
Blau mit weißem Streifen
Bleu avec bande blanche
Blauw met witte streep
2
*
To the remote lead of other equipment or power aerial if any (200 mA max.)
Zum Zusatzkabel des anderen Geräts oder der Motorantenne, sofern vorhanden
(max. 200 mA)
Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une
(200 mA max.)
A5
4
2
2
*
Naar afstandsdraad van andere apparatuur of antenne met circuit indien aanwezig (200 mA max.)
*
Voordat u controleert of het apparaat werkt (alvorens het te
D
installeren), moet deze draad aangesloten zijn. Als dit niet het
geval is, kan de stroom niet worden ingeschakeld.
Brown
Braun
Marron
Bruin
To cellular phone system
Zur Mobiltelefon
A2
5
À un système de téléphone cellulaire
Naar het mobiele-telefoonsysteem
6
B6
B5
B4
B3
B2
B1
B8
B7
White with black stripe
Weiß mit schwarzem
Streifen
Blanc avec bande noire
Wit met zwarte streep
White
Weiß
Blanc
Wit
Gray with black stripe
Grau mit schwarzem
Streifen
Gris avec bande noire
Grijs met zwarte streep
Gray
Grau
Gris
Green with black stripe
Grün mit schwarzem
Streifen
Vert avec bande noire
Groen met zwarte streep
Green
Grün
Vert
Purple with black stripe
Lila mit schwarzem
Streifen
Violet avec bande noire
Paars met zwarte streep
Purple
Lila
Violet
Paars
Grijs
Groen
Left speaker (front)
Right speaker (front)
Left speaker (rear)
Right speaker (rear)
Linker Lautsprecher (vorne)
Enceinte gauche (avant)
Linkerspeaker (voorin)
Rechter Lautsprecher (vorne)
Enceinte droit (avant)
Rechterspeaker (voorin)
Linker Lautsprecher (hinten)
Enceinte gauche (arrière)
Linkerspeaker (achterin)
Rechter Lautsprecher (hinten)
Enceinte droit (arrière)
Rechterspeaker (achterin)
3
Connections Adding Other Equipment / Anschlüsse zum Hinzufügen von anderer Ausrüstung / Raccordement pour ajouter d’autres appareils /
Aansluitingen voor het toevoegen van andere apparatuur
B
Amplifier / Verstärker / Amplificateur / Versterker
You can connect an amplifier and other
equipment to upgrade your car stereo system.
• Connect the remote lead (blue with white
stripe) to the remote lead of the other
equipment so that it can be controlled
through this unit.
Sie können einen Verstärker oder ein anderes
Gerät anschließen, um Ihre Autostereoanlage
zu erweitern.
• Schließen Sie das Fernbedienungskabel (blau • Connectez le fil de commande à distance
mit weißem Streifen) an das
Fernbedienungskabel des anderen Geräts an,
so daß es über dieses Gerät gesteuert
werden kann.
Vous pouvez connecter un amplificateur ou
autre appareil pour améliorer votre système
autoradio.
Het is mogelijk om uw autostereosysteem uit te
breiden met een versterker of andere apparatuur.
• Verbind de externe kabel (blauw met witte streep)
met de externe kabel van het andere apparatuur
zodat deze op afstand vanaf deze apparaat kan
worden bediend.
(bleu avec bande blanche) au fil de commande
à distance de l’autre appareil de façon qu’il
puisse être commandé via cet appareil.
• Pour l’amplificateur seulement:
Déconnectez les enceintes de cet appareil
et connectez-les à l’amplificateur. Laissez
les fils d’enceintes de cet appareil
inutilisés.
• Alleen voor een versterker:
• For amplifier only:
Koppel de speakers van dit apparaat los
en verbind ze aan de versterker. Gebruik
de speakerdraden van dit apparaat niet.
Disconnect the speakers from this unit,
connect them to the amplifier. Leave the
speaker leads of this unit unused.
• Nur für den Verstärker:
Die Lautsprecher von diesem Gerät
abtrennen und am Verstärker anschließen.
Die Lautsprecherleitungen dieses Geräts
unbenutzt lassen.
Rear speakers
Hintere Lautsprecher
Enceintes arrière
Achterspeakers
Remote lead
Y-connector (not supplied with this unit)
Y-Anschluß (nicht mit diesem Gerät mitgeliefert)
Connecteur Y (non fourni avec cet appareil)
Fernbedienungsleitung
Fil d’alimentation à distance
Afstandbedieningsdraad
Y-connector (wordt niet bij dit apparaat geleverd)
INPUT
JVC Amplifier
JVC Verstärker
L
L
JVC Amplificateur
JVC Versterker
R
R
Remote lead (Blue with white stripe)
Fernbedienungsleitung (Blau mit weißem Streifen)
Fil d’alimentation à distance (Bleu avec bande blanche)
Afstandbedieningsdraad (Blauw met witte streep)
3
*
To the remote lead of other equipment or power aerial if any
Zum Zusatzkabel des anderen Geräts oder der Motorantenne,
sofern vorhanden
OUT
LINE
Au fil de télécommande de l’autre appareil ou à l’antenne
automatique s’il y en a une
Naar afstandsdraad van andere apparatuur of antenne met circuit
indien aanwezig
L
L
KD-G401
R
R
FRONT
REAR
Front speakers
Vordere Lautsprecher
Enceintes avant
Voorspeakers
Signal cord (not supplied with this unit)
Einzelleitung (nicht mit diesem Gerät mitgeliefert)
Cordon de signal (non fourni avec cet appareil)
Signaalkabel (wordt niet bij dit apparaat geleverd)
3
*3 Firmly attach the ground wire to the
metallic body or to the chassis of the car—
to the place not coated with paint (if coated
with paint, remove the paint before
attaching the wire). Failure to do so may
cause damage to the unit.
*3 Verbinden Sie den Erdungsleiter mit der
Karosserie oder dem Rahmen des
*3 Attachez solidement le fil de mise à la masse
au châssis métallique de la voiture—à un
*
Bevestig de aardedraad goed met een metalen
onderdeel of het chassis van de auto—bevestig
op een niet-gelakt gedeelte (indien gelakt,
schuur dan af alvorens de draad te bevestigen).
Het toestel kan worden beschadigd indien de
aardedraad niet goed is aangesloten.
Fahrzeugs. Die Kontaktstelle darf nicht
lackiert sein (sollte die Kontaktstelle lackiert
sein, entfernen Sie den Lack der
endroit qui n’est pas recouvert de peinture
(s’il est recouvert de peinture, enlevez
d’abord la peinture avant d’attacher le fil).
L’appareil peut être endommagé si cela n’est
pas fait correctement.
Kontaktstelle, bevor Sie den Leiter
befestigen). Wenn der Erdungsleiter nicht
ordnungsgemäß angeschlossen wird, kann
dieses Gerät beschädigt werden.
Connecting to the steering wheel remote controller / Anschluß an die Lenkradfernbedienung / Connexion de la télécommande de volant /
Verbinden met de stuurwiel-afstandsbediening
C
If your car is equipped with the steering wheel remote controller, you can operate this receiver using the
controller. To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required.
Consult your JVC IN-CAR ENTERTAINMENT dealer for details.
Wenn Ihr Fahrzeug mit einer Lenkradferndienung ausgestattet ist, können Sie damit diesen Receiver
steuern. Hierfür ist ein für Ihr Fahrzeug passender Radio-Lenkrad-Fernbedienungsadaption von JVC (nicht
im Lieferumfang enthalten) erforderlich. Für weitere Einzelheiten wenden Sie sich an Ihren JVC
Autoradiohändler.
OE remote adapter (not supplied)
Radio-Lenkrad-Fernbedienungsadaption
(nicht im Lieferumfang enthalten)
Steering wheel remote input
Eingang für Lenkradfernbedienung
Entrée de la télécommande de volant Adaptateur pour télécommande au volant (non fourni)
Ingang stuurwiel-afstandsbediening
Adapter voor stuurwiel-afstandsbediening (niet bijgeleverd)
Si votre voiture est munie d’une télécommande de volant, vous pouvez commander cet autoradio en utilisant
la télécommande. Pour le faire, un adaptateur pour télécommande au volant JVC (non fourni) correspondant
à votre voiture est nécessaire. Consultez votre revendeur d’autoradio JVC pour les détails.
Indien uw auto een stuurwiel-afstandsbediening heeft, kunt u deze receiver met die afstandsbediening bedienen.
Hiervoor heeft u echter een JVC adapter (niet bijgeleverd) nodig die geschikt is voor de stuurwiel-afstandsbediening van
uw auto. Raadpleeg uw JVC car audio dealer voor details.
KD-G401
Steering wheel remote controller (equipped in the car)
Lenkradfernbedienung (im Fahrzeug installiert)
Télécommande de volant (installée dans la voiture)
Stuurwiel-afstandsbediening (in de auto)
PRECAUTIONS on power supply
and speaker connections:
VORSICHTSMASSREGELN beim
Anschließen der Stromversorgung
und Lautsprecher:
• Die Lautsprecherleitungen des Netzkabels
NICHT an der Autobatterie anschließen, da
sonst das Gerät schwer beschädigt wird.
• VOR dem Anschließen der
PRECAUTIONS sur l’alimentation et
la connexion des enceintes:
• NE CONNECTEZ PAS les fils d’enceintes
du cordon d’alimentation à la batterie;
sinon, l’appareil serait sérieusement
endommagé.
• AVANT de connecter les fils d’enceintes du
cordon d’alimentation aux enceintes, vérifiez
le câblage des enceintes de votre voiture.
VOORZORGSMAATREGELEN bij het
verbinden van de stroomkabeldraad
met de speakers:
• DO NOT connect the speaker leads of the
power cord to the car battery; otherwise,
the unit will be seriously damaged.
• BEFORE connecting the speaker leads of the
power cord to the speakers, check the
speaker wiring in your car.
• Verbind de speakerdraden van de
stroomkabel NIET met de accu van de
auto; als u dit wel doet, zal het apparaat
ernstige schade oplopen.
• VOORDAT u de speakerdraden van de
stroomkabel met de speakers verbindt, moet u de
bedrading van de speakers in uw auto controleren.
Lautsprecherleitungen des
Spannunsgversorgungskabels an die
Lautsprecher, die Lautsprecherverdrahtung in
Ihrem Auto überprüfen.
+
+
+
+
-
+
-
+
-
L
L
L
-
-
-
+
+
+
+
-
+
-
+
-
R
R
R
-
-
-
4
|