CD RECEIVER
RECEPTOR CON CD
RECEPTEUR CD
KD-S6250/S580
KD-S6250
FM
DIRECT
TRACK
ACCESS
KD-S6250
CD
SSM
AM
MO
RPT
RND
MODE
SCM
31
KD-S580
FM
DIRECT
TRACK
ACCESS
KD-S580
MODE
CD
SSM
AM
MO
RPT
RND
SCM
COMPACT
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
Model No.
Serial No.
GET0064-001A
[J]
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit .................................. 2
How to use the number buttons ................... 3
Selecting CD playback modes ................... 12
Prohibiting CD ejection .............................. 13
LOCATION OF THE BUTTONS ...............4
Control panel ............................................... 4
Remote controller (only for KD-S6250) ....... 5
Preparing the remote controller
SOUND ADJUSTMENTS .................... 14
Adjusting the sound ................................... 14
Turning on/off the loudness function ............. 14
Using the Sound Control Memory (SCM) .. 15
Storing your own sound adjustments......... 16
(only for KD-S6250) ................................. 6
BASIC OPERATIONS ..........................7
OTHER MAIN FUNCTIONS ................. 17
Setting the clock ........................................ 17
To cancel advanced SCM .......................... 17
Selecting the level display.......................... 18
Detaching the control panel ....................... 19
Turning on the power ................................... 7
RADIO BASIC OPERATIONS .................8
Listening to the radio ................................... 8
Storing stations in memory .......................... 9
Tuning into a preset station ....................... 10
MAINTENANCE .............................. 20
Handling CDs ............................................ 20
CD OPERATIONS ............................ 11
Playing a CD .............................................. 11
Locating a track or a particular portion
TROUBLESHOOTING ....................... 21
SPECIFICATIONS ............................ 22
on a CD.................................................. 12
How to use the number buttons:
If you press MODE, the unit goes into functions mode and the number buttons work as different
function buttons.
MODE
8
MO
10
12
RND
7
9
11
RPT
Time countdown indicator
To use these buttons as number buttons again after pressing MODE, wait for 5 seconds without
pressing any number button until the functions mode is cleared.
• Pressing MODE again also clears the functions mode.
BEFORE USE
* For safety....
* Temperature inside the car....
• Do not raise the volume level too much, as this If you have parked the car for a long time in hot
will block outside sounds, making driving or cold weather, wait until the temperature in the
dangerous.
car becomes normal before operating the unit.
• Stop the car before performing any complicated
operations.
3
LOCATION OF THE BUTTONS
Control panel
; a
s
d fg
h j
l
k
Display window
5
34
6789
12
FM
DIRECT TRACCESS
CD
SSM
AM
MO
RPT
RND
MODE
SCM
pq
w
e
r t y u i
o
1
(Standby/On/Attenuator) button
Display window
; "SCM" indicator
a CD indicator
s Band indicators
FM1, FM2, FM3
2 +/– button
3 LOUD (Loudness) button
4 SEL (Select) button
5 Loading slot
6 AM button
7 0 (Eject) button
AM
d Tuner reception indicators
MO (Monaural), ST (Stereo)
f RND (Random) indicator
g RPT (Repeat) indicator
h LOUD indicator
j CD-in indicator
8 CD button
9 FM button
p Remote sensor (only for KD-S6250)
q DISP (Display) button
w MO (Monaural) button
e RPT (Repeat) button
r RND (Random) button
t Number buttons
k Main display
l Volume level indicator
y MODE button
u SCM (Sound control memory) button
i
o 4
(Control panel release) button
¢ buttons
/
• Also functions as SSM buttons when
pressed together.
4
4 Functions the same as the + and – buttons on
the main unit.
Remote controller
Note: These buttons cannot be used for the clock
(CLOCK H, CLOCK M), SCM LINK and
LEVEL (see pages 17 and 18).
(only for KD-S6250)
This section is only for KD-S6250.
5 Selects the sound mode.
Each time you press the button, the mode
changes.
6 Selects the source.
5
6
1
2
3
4
Each time you press the button, the source
changes.
7 • Searches stations while listening to the radio.
7
•
Fast -forwards or reverses the track if pressed
and held while listening to a CD.
•
Skips to the beginning of the next tracks or
goes back to the beginning of the current (or
previous tracks) if pressed briefly while
listening to a CD.
RM-RK31
1 • Turns on the unit if pressed when the unit is
turned off.
•
•
Turns off the unit if pressed and held until
“SEE YOU” appears on the display.
Drops the volume level in a moment if
pressed briefly.
Press again to resume the volume.
2 • Functions as the BAND button while listening
to the FM broadcast.
Each time you press the button, the band
changes.
•
Does not function as the PROG/DISC +
button.
3 • Functions as the PRESET button while
listening to the radio.
Each time you press the button, the preset
station number increases, and the selected
station is tuned into.
•
Does not function as the DISC – button.
5
Preparing the remote controller
This section is ONLY FOR KD-S6250.
3 Return the battery holder.
Insert again the battery holder pushing it until
you hear a clicking sound.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the main unit. Make sure there is no
obstacle in between.
(back side)
Remote sensor
WARNING:
•
•
•
•
•
Store the batteries in a place which children
cannot reach.
If a child accidentally swallows the battery,
consult a doctor immediately.
Do not recharge, short, disassemble or heat the
batteries or dispose it in a fire.
Doing any of these things may cause the
batteries to give off heat, crack or start a fire.
Do not leave the batteries with other metallic
materials.
Doing this may cause the batteries to give off
heat, crack or start a fire.
When throwing away or saving the batteries,
wrap it in tape and insulate; otherwise, the
batteries may start to give off heat, crack or start
a fire.
Do not poke the batteries with tweezers or
similar tools.
Doing this may cause the batteries to give off
heat, crack or start a fire.
• Do not expose the remote sensor to strong light
(direct sunlight or artificial lighting).
Installing the battery
When the controllable range or effectiveness of
the remote controller decreases, replace the
battery.
1 Remove the battery holder.
1) Push out the battery holder in the direction
indicated by the arrow using a ball point
pen or a similar tool.
2) Remove the battery holder.
(back side)
1)
2)
2 Place the battery.
Slide the battery into the holder with the +
side facing upwards so that the battery is fixed
in the holder.
Lithium coin battery
(product number:
CR2025)
6
BASIC OPERATIONS
1
FM
DIRECT
TRACK
ACCESS
CD
SSM
2
AM
MO
RPT
RND
MODE
SCM
3
4 Adjust the sound as you want (see
Turning on the power
pages 14 – 16).
1 Turn on the power.
To drop the volume in a moment
Press
briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
To turn off the power
Press and hold
appears on the display.
2 Select the source.
until "SEE YOU"
FM
CD
Note:
When you use this unit for the first time, set the built-
in clock correctly, see page 17.
AM
To operate the tuner (FM or AM),
see pages 8 – 10.
To operate the CD,
CAUTION on volume setting
CDs produce very little noise compared with other
sources. If the volume level is adjusted for the tuner,
for example, the speakers may be damaged by the
sudden increase in the output level. Therefore, lower
the volume before playing a disc and adjust it as
required during playback.
see pages 11 – 13.
3 Adjust the volume.
To increase the volume.
To decrease the volume.
Volume level appears
Volume level indicator
(see page 18)
7
RADIO BASIC OPERATIONS
FM
DIRECT
TRACK
ACCESS
CD
SSM
AM
MO
RPT
RND
MODE
SCM
To stop searching before a station is received,
press the same button you have pressed for
searching.
Listening to the radio
You can use either automatic searching or manual
searching to tune into a particular station.
Searching a station manually:
Manual search
Searching a station automatically:
Auto search
1 Select the band (FM 1 – 3, AM).
1 Select the band (FM 1 – 3, AM).
FM
FM1
FM3
FM2
FM
FM1
FM3
FM2
AM
AM
AM
AM
Note:
Selected band appears
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2 Press and hold
¢ or 4
“M” starts flashing on the display.
until
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
SSM
2 Start searching a station.
Press
¢ to search
stations of higher
frequencies.
SSM
Press 4
stations of lower
frequencies.
to search
Selected band appears
When a station is received, searching stops.
8
Storing stations in memory
3 Tune into a station you want while “M”
is flashing.
You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
Press
stations of higher
frequencies.
¢ to search
SSM
• Manual preset of both FM and AM stations
Press 4
to search
stations of lower
frequencies.
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band
(FM1, FM2 and FM3).
• If you release your finger from the button, the
manual mode will automatically turn off after 5
seconds.
• If you hold down the button, the frequency keeps
changing until you release the button.
1 Select the band (FM1 – 3) you want
to store FM stations into.
• Each time you press the button, the FM
band changes as follows:
When an FM stereo broadcast is hard
to receive:
1 Press MODE to enter the functions mode while
listening to an FM stereo broadcast.
2 Press MO (monaural), while still in the functions
mode, so that the MO indicator lights up on
the display.
FM
FM1
FM3
FM2
Each time you press the button, the MO indicator
lights up and goes off alternately.
2 Press and hold both buttons for
more than 2 seconds.
MODE
MO
SSM
“SSM” appears, then disappears when automatic
preset is over.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved (the ST indicator
goes off).
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3.)
These stations are preset in the number buttons –
No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
9
Notes:
Manual preset
• A previously preset station is erased when a new station
is stored in the same preset number.
• Preset stations are erased whent the power supply to
the memory circuit is interrupted (for example, during
battery replacement). If this occurs, preset the stations
again.
You can preset up to 6 stations in each band (FM1,
FM2, FM3 and AM) manually.
Ex: Storing an FM station of 88.3 MHz into the
preset number 1 of the FM1 band.
1 Select the band (FM1 – 3, AM) you
want to store FM stations into (in
this example, FM1).
Tuning into a preset station
• Each time you press the button, the FM
band changes as follows:
You can easily tune into a preset station.
Remember that you must store stations first. If you
have not stored them yet, see “Storing stations in
memory” on page 9 and 10.
FM
FM1
FM3
FM2
1 Select the band (FM1 – 3, AM).
AM
AM
FM
FM1
FM3
FM2
2 Tune into a station of 88.3 MHz.
Press
stations of higher
frequencies.
¢ to tune
AM
AM
SSM
Press 4
stations of lower
frequencies.
to tune
2 Select the number (1 – 6) for the preset
station you want.
8
MO
10
12
RND
7
9
11 RPT
3 Press and hold the number button (in
this example, 1) for more than 2
seconds.
“P1” flashes for a few seconds.
4 Repeat the above procedure to store
other stations into other preset
numbers.
10
CD OPERATIONS
FM
DIRECT
TRACK
ACCESS
CD
SSM
AM
MO
RPT
RND
MODE
SCM
To stop play and eject the CD
Press 0.
Playing a CD
CD play stops and the CD automatically ejects
from the loading slot.
If you change the source, the CD play also stops
(without ejecting the CD this time).
1 Insert a disc into the loading slot.
The unit turns on,
draws a CD and starts
playback automatically.
Notes:
Note:
• If the ejected disc is not removed for about 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust. (CD play will not
start this time.)
When a CD is inserted
upside down, the CD
automatically ejects.
• You can eject the CD even when the unit is turned off.
The CD-in indicator lights up
Total playing time of
the inserted disc
Total track number of
the inserted disc
Elapsed playing time
Current track
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing CD
turns on the unit and starts playback automatically.
11
Locating a track or a particular
portion on a CD
Selecting CD playback modes
To play back tracks at random (Random Play)
1 Press MODE to enter the functions mode
while playing a CD. This unit enters the
functions mode.
2 Press RND (Random), while still in the functions
mode, so that the RND indicator lights up on
the display.
To fast-forward or reverse the track
Press and hold
while playing a CD, to fast
forward the track.
¢,
SSM
Press and hold 4
while playing a CD, to
reverse the track.
,
Then, each time you press the button, CD
random play mode turns on and off alternately.
MODE
RND
To go to the next tracks or the previous
tracks
Press
¢ briefly, while
playing a CD, to go ahead
to the beginning of the next
track. Each time you press
the button consecutively,
the beginning of the next
tracks is located and played
back.
The RND indicator
SSM
When the random mode is turned on, the RND
indicator lights up on the display and a track
randomly selected starts playing.
Press 4
briefly, while
playing a CD, to go back to
the beginning of the current
track. Each time you press
the button consecutively,
the beginning of the
To play back tracks repeatedly (Repeat Play)
1 Press MODE to enter the functions mode
while playing a CD. This unit enters the
functions mode.
2 Press RPT (Repeat), while still in the functions
mode, so that the RPT indicator lights up on
the display.
previous tracks is located
and played back.
To go to a particular track directly
Then, each time you press the button, CD
repeat play mode turns on and off alternately.
8
MO
10
12
RND
7
9
11 RPT
MODE
RPT
Press the number button corresponding to the
track number to start its playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than
1 second.
Track number
of the currently
playing track
The RPT indicator
When the repeat mode is turned on, the RPT
indicator lights up on the display.
12
Prohibiting CD ejection
You can prohibit the CD ejection and can lock a
CD in the loading slot.
Press and hold CD and 0 for more than 2
seconds.
CD
“EJECT” flashes on the display for about 5
seconds, and the CD is locked and cannot be
ejected.
To cancel the prohibition and “unlock” the CD,
press and hold CD and 0 again for more than
2 seconds. “EJECT” appears on the display, and
the CD ejects from the loading slot.
13
SOUND ADJUSTMENTS
Adjusting the sound
2 Adjust the level
You can adjust the sound characteristics to your
preference.
To increase the level.
1 Select the item you want to adjust.
To decrease the level.
Each time you press the
button, the adjustable
items change as follows:
Bass level indicator
Treble level indicator
Indication
To do:
Range
BAS
(Bass)
Adjust the bass.
–06 (min.)
|
Note:
Normally the + and – buttons work as the volume
control. So you do not have to select “VOL” to adjust
the volume level.
+06 (max.)
TRE
(Treble)
Adjust the treble.
–06 (min.)
|
+06 (max.)
FAD
(Fader)*
Adjust the front
and rear speaker
balance.
R06 (Rear only)
|
F06 (Front only)
Turning on/off the loudness
function
BAL
Adjust the left
L06 (Left only)
(Balance) and right speaker
balance.
|
The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these frequencies
to produce well-balanced sound at low volume level.
Each time you press LOUD, the loudness function
turns on and off alternatively.
R06 (Right only)
VOL
Adjust the volume. 00 (min.)
(Volume)
|
50 (max.)
* If you are using a two-speaker system, set the fader
level to “00.”
14
Recalling the sound modes
Using the Sound Control
Memory (SCM)
When “SCM LINK” is set to “LINK ON,”
select the source.
You can select and store a preset sound adjustment
suitable to each playback source. (Advanced SCM)
FM
CD
Selecting and storing the sound modes
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source and will be shown on the display.
A sound mode can be stored for each of the
following sources — FM1, FM2, FM3, AM, CD.
• If you do not want to store the sound mode
separately for each playback source, but want
to use the same sound mode for all the sources,
see “To cancel Advanced SCM” on page 17.
AM
Each time you change the playback source, the
SCM indicator flashes on the display.
The sound mode stored in memory for the
selected source is recalled.
Notes:
Select the sound mode you want.
• Each time you press the button, the sound mode
changes as follows.
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustment” on
page 16.
SCM
• To adjust the bass and treble reinforcement levels or
to turn on/off the loudness function temporarily, see
page 14. (Your adjustments will be cancelled if another
source is selected.)
• When “SCM LINK” is set to “LINK ON”, the
selected sound mode can be stored in memory
for the current source and the effect applies only
to the current source.
• When “SCM LINK” is set to “LINK OFF”, the
selected sound mode effect applies to any source.
Indication
For:
Preset values
Bas
TRE
LOUD
SCM OFF (Flat sound)
00
00
On
On
BEAT
SOFT
Rock or disco +02
music
00
Quiet
+01
–03
Off
Off
background
music
POP
Light music
+04
+01
15
5 To turn ON/OFF the loudness function.
Storing your own sound
adjustment
See page 14 for details.
You can adjust the sound modes (BEAT, SOFT,
POP: see page 15) to your preference and store
your own adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is cancelled before you
finish, start from step 1 again.
6 Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
1 Call up the sound mode you want to
adjust.
Your adjustment made for the selected sound
mode is stored in memory.
See page 15 for details.
SCM
SCM
7 Repeat the same procedure to store
2 Select “BAS” (bass) or “TRE” (treble).
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset
values listed in the table on page 15.
3 Adjust the bass or treble level.
See page 14 for details.
4 Repeat steps 2 and 3 to adjust the
other items.
16
OTHER MAIN FUNCTIONS
To Cancel Advanced SCM
Setting the clock
You can cancel theAdvanced SCM (Sound Control
Memory), and unlink the sound modes and the
playback sources.
When shipped from the factory, a different sound
mode can be stored in memory for each source so
that you can change the sound modes simply by
changing the sources.
1 Press and hold SEL (Select) for more
than 2 seconds.
“CLOCK H”, “CLOCK M”, “SCM LINK” or
“LEVEL” appears on the display.
LINK ON:
Advanced SCM (different SCM for
different sources)
2 Set the hour.
1 Select “CLOCK H” if not shown on the
display.
LINK OFF: Conventional SCM (one SCM for all
sources)
2 Adjust the hour.
1 Press and hold SEL for more than 2
seconds.
2
1
“CLOCK H”, “CLOCK M”, “SCM LINK” or
“LEVEL” appears on the display.
SSM
3 Set the minute.
1 Select “CLOCK M.”
2 Adjust the minute.
2 Select "SCM LINK" if not shown on the
display.
2
1
SSM
SSM
4 Press SEL (select) to finish the setting.
To check the current clock time (changing
the display mode)
Press DISP repeatedly. Each time you press the
button, the display mode changes as follows.
3 Select the desire mode — "LINK ON"
or "LINK OFF".
During tuner operation:
Clock
Frequency
During CD operation:
4 Press SEL (select) to finish the setting.
Elapsed
playing time
Clock
• If the unit is not in use when you press DISP, the
power turns on, the clock time is shown for
5 seconds, then the power turns off.
17
Selecting the level display
3 Select the desired mode — “VOL 1”,
“VOL 2” or “OFF”.
You can select the level display according to your
preference.
When shipped from the factory, “VOL 2” is selected.
VOL 1 : Shows the volume level indicator.
VOL 2 : Alternates “VOL 1” setting and
illumination display.
OFF
: Erase the volume level indicator.
4 Press SEL (select) to finish the setting.
1 Press and hold SEL for more than 2
seconds.
“CLOCK H”, “CLOCK M”, “SCM LINK” or
“LEVEL” appears on the display.
2 Select “LEVEL” if not shown on the
display.
“CLOCK H”, “CLOCK M”, “SCM LINK” or
“LEVEL” appears on the display.
SSM
18
How to attach the control panel
Detaching the control panel
You can detach the control panel when leaving the
car.
When detaching or attaching the control panel, be
careful not to damage the connectors on the back
of the control panel and on the panel holder.
1 Insert the left side of the control panel
into the groove on the panel holder.
How to detach the control panel
Before detaching the control panel, be sure to
turn off the power.
1 Unlock the control panel.
2 Press the right side of the control
panel to fix it to the panel holder.
2 Lift and pull the control panel out of
the unit.
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe the
connectors with a cotton swab or cloth moistened
with alcohol, being careful not to damage the
connectors.
3 Put the detached control panel into
the case provided.
Connectors
19
MAINTENANCE
Handling CDs
Moisture condensation
Moisture may condense on the lens inside the
CD player in the following cases:
This unit has been designed only to reproduce the
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may
malfunction. In this case, eject the CD and leave
the unit turned on for a few hours until the
moisture evaporates.
COMPACT
CDs bearing the
mark.
DIGITAL AUDIO
• Other discs cannot be played back.
How to handle CDs
Center holder
When removing a CD from its
case, press down the center
holder of the case and lift the
CD out, holding it by the edges.
• Always hold the CD by the edges. Do not touch
its recording surface.
When playing a CD-R (Recordable)
You can playback your original CD-Rs on this
receiver.
• Before playing back CD-Rs, read their
instructions or cautions carefully.
• Some CD-Rs recorded on CD recorders may not
be played back on this receiver because of their
disc characteristics, and of the following reasons:
– Discs are dirty or scratched.
When storing a CD into its case, gently
insert the CD around the center holder (with the
printed surface facing up).
• Make sure to store CDs into the cases after
use.
– Moisture condensation occurs on the lens
inside the unit.
– The pickup lens inside the CD player is dirty.
• Use only “finalized” CD-Rs.
• CD-RWs (Rewritable) cannot be played back on
this receiver.
• Do not use CD-Rs with stickers or sticking labels
on the surface. They may cause malfunctions.
To keep CDs clean
A dirty CD may not play
correctly. If a CD does
becomes dirty, wipe it with a
soft cloth in a straight line
from center to edge.
CAUTIONS:
• Do not insert 8cm (3 3/16") CDs (single CDs)
into the loading slot. (Such CDs cannot be
ejected.)
To play new CDs
New CDs may have some
rough spots around the
• Do not insert any CD of unusual shape – like a
heart or flower; otherwise, it will cause a
malfunction.
• Do not expose CDs to direct sunlight or any
heat source or place them in a place subject to
high temperature and humidity. Do not leave
them in a car.
inner and outer edges. If
such a CD is used, this unit
may reject the CD.
To remove these rough spots, rub the edges with
a pencil or ball-point pen, etc.
• Do not use any solvent (for example,
conventional record cleaner, spray, thinner,
benzine, etc.) to clean CDs.
About mistracking:
Mistracking may result from driving on extremely
rough roads. This does not damage the unit and the
CD, but will be annoying.
We recommend that you stop CD play while driving
on such rough roads.
20
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Causes
Remedies
• CD cannot be played back.
CD is inserted upside down.
You are driving on rough roads.
Insert the CD correctly.
• CD sound is sometimes
interrupted.
Stop CD play while driving
rough roads.
CD is scratched.
Change the CD.
Connections are incorrect.
Check the cords and
connections.
• “NO DISC” appears on the
display.
No CD is in the loading slot.
CD is inserted incorrectly.
Insert a CD into the loading slot.
Insert it correctly.
• Sound cannot be heard from
the speakers.
The volume control is turned to
the minimum level.
Adjust it to the optimum level.
Connections are incorrect.
Signals are too weak.
Check the cords and
connections.
• SSM (Strong-station
Store stations manually.
Sequential Memory) automatic
preset does not work.
• Static noise while listening to
the radio.
The antenna is not connected
firmly.
Connect the antenna firmly.
• CD can be neither played back The CD player may function
Press
and 0 at the
nor ejected.
incorrectly.
same time for more than 2
seconds. Be careful not to drop
CD when it is ejected.
• The unit does not work at all.
The built-in microcomputer may Press
and SEL at the
function incorrectly due to noise, same time for more than 2
etc.
seconds to reset the unit. (The
clock setting and preset stations
stored in memory are erased.)
(See page 2.)
21
SPECIFICATIONS
AUDIO AMPLIFIER SECTION
CD PLAYER SECTION
Type: Compact disc player
Maximum Power Output:
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Front: 45 watts per channel
Rear: 45 watts per channel
Number of channels: 2 channels (stereo)
Frequency Response: 5 Hz to 20 000 Hz
Continuous Power Output (RMS):
Front: 17 watts per channel into 4 Ω,
40 Hz to 20 000 Hz at no more than
0.8% total harmonic distortion.
Rear: 17 watts per channel into 4 Ω,
40 Hz to 20 000 Hz at no more than
0.8% total harmonic distortion.
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range
Dynamic Range:
90 dB
Signal-to-Noise Ratio: 95 dB
Wow and Flutter: Less than measurable limit
GENERAL
Power Requirement
Operating Voltage: DC 14.4 volts (11 volts to 16
volts allowance)
Allowable Working Temperature:
0°C to +40°C (32°F to 104°F)
Grounding System: Negative ground
Dimensions (W x H x D)
Bass:
10 dB at 100 Hz
Treble: 10 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance: 2.0 V/20 kΩ load
(full scale)
Installation Size:
Output Impedance: 1 kΩ
182 mm x 52 mm x 150 mm
(7-3/16" x 2-1/16" x 5-15/16")
Panel Size: 188 mm x 58 mm x 14 mm
(7-7/16" x 2-5/16" x 5/8")
TUNER SECTION
Frequency Range
Mass: 1.3 kg (2.9 lbs) (excluding accessories)
FM: 87.5 MHz to 107.9 MHz
AM: 530 kHz to 1 710 kHz
Design and specifications subject to change
without notice.
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Alternate Channel Selectivity (400 kHz):
65 dB
If a kit is necessary for your car, consult your
telephone directory for the nearest car audio
speciality shop.
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 35 dB
Capture Ratio: 1.5 dB
[AM Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
22
.jvcmobile.com
Visit us on-line for
Technical Support & Customer Satisfaction Survey.
US RESIDENTS ONLY
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to Reset
Still having trouble??
USA ONLY
Call 1-800-252-5722
We can help you!
VICTOR COMPANY OF JAPAN, LIMITED
EN, SP, FR
1001KKSFLEJEIN
J
C
V
|