User Guide
Mini Bluetooth Headset
MODEL:HB200M
Table of Contents
Thank you
Thank You
3
3-5
5-6
6
Thank you for purchasing the Hisense HB200M Bluetooth®
Headset. We hope you enjoy it! This instruction manual will
get you started and ready to make the most of your headset.
Safety Guidelines
Introducing the HB200M
What Your Headset can do
Specifications
7
WARNING!
Headsets are capable of delivering sounds at loud
volumes and high pitched tones. Exposure to such
sounds can result in permanent hearing loss or damage.
The volume level may vary based on conditions such
as the phone you are using, its reception and volume
settings, and the environment. Please read the safety
guidelines below prior to using this headset.
GETTING STARTEd
7
7-8
7-8
9
Turning Your Headset On & OFF
Pairing it with Your Phone
Wear It How You like It
left or Right Ear use
Adjusting Earplug
Wearing the Headset as a Pendant
charging your Headset
Answer a call
End a call
Make a call
Reject a call*
A c t i v a t e voice dialing*
Redial last Number*
A d j u s t Sound and volume
c a l l Waiting and Placing a call on Hold*
9
10
10
11
12
12
12
12
12
12
13
13
Safety Guidelines
1. Prior to using this product follow these steps:
Before putting on the headset, turn the volume
control to its lowest level, put the headset on,
and then slowly adjust the volume control to a
comfortable level.
2. during the use of this product:
What the lights Mean
using the HB200M with Two Mobile Phones
Troubleshooting
Taking care of Your Headset
Glossary
14
15
16
Keep the volume at the lowest level possible and
avoid using the headset in noisy environments
where you may be inclined to turn up the volume.
If increased volume is necessary, adjust the volume
17
17-18
2
3
control slowly, and if you experience any discomfort
or ringing in your ears, immediately discontinue use
and consult a physician.
Avoid exposing the product to rain or other liquids.
dispose of the product according to local standards and
regulations.
do not use the Headset in environments where there is a
danger of ignition of flammable gases.
With continued use at high volume, your ears may
become accustomed to the sound level, which may
result in permanent damage to your hearing without
any noticeable discomfort.
The headset is equipped with a magnetic pendant.
The magnet in the pendant can harm other
electronic devices. handle the magnetic pendant
with care and keep away from electronic devices
such as speakers, Tv, lcd screens Etc.
using the headset while operating a motor vehicle,
motorcycle, watercraft or bicycle may be dangerous,
and is illegal in some jurisdictions. check your local
laws. use caution while using your headset when
you are engaging in any activity that requires your
full attention. While engaging in any such activity,
removing the headset from your ear area or turning
off your headset will keep you from being distracted,
so as to avoid accident or injury.
Introducing the HB200M
1. Microphone
3. Keep out of reach of children:
2. Multi-Function Button (MFB)
The plastic bags the product and its parts are
wrapped in are not toys for children. The bags
themselves or the many small parts they contain
may cause choking if ingested.
•
Pairing Button – press and hold for 5 sec to put
headset into pairing mode
•
•
Answer/End Button
Press to turn headset on (blue and red lights flash
for 1sec)
4. Never try to dismantle the product yourself. None of the
internal components can be replaced or repaired by
users.
•
•
Press and hold to turn headset off (blue and red
lights flash for 1sec and then power will shut down)
Press to answer or end a call
Only authorized dealers or service centers may open
the product. If any parts of your product require
replacement for any reason, including normal wear
and tear or breakage, contact your dealer.
3. lEd light
4. charging Socket
4
5
5. Speaker
6. Ear Hook
Specifications
•
•
up to 5.5 Hours talk time/Standby Time up to 150
hours
Rechargeable battery with charging option from Ac
power supply or Pc via uSB cable
•
•
•
•
Weight: 7.5 gr.
Operating range up to 10 meters (approx. 33 feet)
Headset and hands-free Bluetooth profiles
Bluetooth Specification (see glossary) version 2.1
What your Headset Can Do
GETTING STARTED
Your Hisense HB200S lets you do the following:
The Hisense HB200M is easy to operate.
•
•
•
•
•
•
•
Answer calls
End calls
Turning your headset on and off
To turn on your headset press and hold the MFB for 5
seconds. Release the button when the indicator lights
flash (both blue and red lights) once.
Reject calls*
voice dialing*
last Number Redialing*
call Waiting*
Note: blue led light indicates that the headset is connected
to a mobile phone. When the headset is powered on but is
not connected to any Bluetooth device, the red indiction
light will keep on flashing.
Put call on Hold*
* Phone dependent
6
7
To turn off your headset, press and hold the MFB for 5
seconds. Release when the indicator lights flash once
(both red and blue lights) and then off again together
with an indication tone
The MFB (multi function button) on the headset performs
different functions depending on how long you press it.
5. Your phone will find the Hisense HB200M.
6. Your phone will then ask if you want to pair with it.
Accept by pressing ‘Yes’ or ‘OK’ on the phone and
confirm with the passkey or PIN = 0000 (4 zeros).
Your phone will confirm when pairing is complete.
Pairing with your Phone or other Device
Before using your Hisense HB200M, you need to pair it
with your mobile phone.
In case of unsuccessful pairing, repeat steps 1 to 6.
1. Make sure that the headset is turned off
2. Hold the headset’s MFB for 8 seconds till the blue
and red indication light flash alternatively, meaning
that the headset has entered into pairing mode.
3. Activate Bluetooth function of the mobile phone to
search for Bluetooth devices (please refer to the
phone’s manual).
Wear It How you like It
left or Right Ear Use
The Hisense HB200M is ready to wear on your right ear. If
you prefer the left, gently remove the ear hook and rotate
to fit left ear.
4. Set your Bluetooth phone to ‘discover’ the Hisense
HB200M.
follow your phone’s instruction guide. This usually
involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’
menu on your phone and selecting the option to
‘discover’ or ‘add’ a Bluetooth device.
* (See example from a typical mobile phone).
8
9
Adjusting the Ear Bud
CAUTIoN
1. The in-ear bud is assembled by default. You can
change different ear bud sizes according.
2. Rotate the in-ear bud clockwise or counter clockwise
about 45 degrees to remove the ear bud, then replace
with desired ear bud.
The Magnetic clip is delicate and doesn’t hold the
headset tight. Handle with care!! do not use the
Magnetic clip for sport or other activities that can
cause the headset to fall down.
STRoNG MAGNET!
It can be harmful to pacemaker wearers and others
with medical implants. Stay clear! Keep tools and
other metal objects away. To avoid damage, keep
magnetic media such as memory disks/chips,
credit cards and tapes away.
Wearing the Headset as a Pendant
Charging your Headset
charging
use the supplied magnetic clip, you can attach the headset
using the metal part around the charging socket, it will
connect easily to the magnet of the pendant.
Socket Port
Make sure that your Hisense
HB200S headset is fully charged
before first use. use the Ac adaptor
to charge from a power socket, or
charge directly from your Pc with
the uSB cable provided.
connect your headset to the Ac
adaptor or uSB cable After connecting to the power
source. The red lEd light will blink twice and then solid
red, your headset is charging. After charging ends the
lEd color will turn from red to solid blue.
clip
charging Port
10
11
Adjust Sound and volume
How to…
volume adjustment can be done by the volume control
in your mobile phone, we canceled the volume button on
the headset In order to reduce the size of the HB200M.
Answer a Call
Press the MFB on your headset to answer a call.
Call Waiting and Placing a Call on Hold*
This lets you put a call on hold during a conversation and
answer a waiting call.
Press the MFB twice to put the active call on hold and
answer the waiting call.
End a Call
Press the MFB to end an active call.
Make a Call
When you make a call from your mobile phone, the call
will (subject to phone settings) automatically transfer to
your headset. If your phone does not allow this feature,
press on the Hisense HB200M’s MFB to transfer the call
to the headset.
Press the MFB twice to switch between the two calls.
Press the MFB to end the active conversation.
Functions marked with * are dependent on your phone
supporting these features.
check your phone’s user manual for further information.
Reject a Call*
Press the MFB for approximately 2 seconds when the
phone rings to reject an incoming call. depending on your
phone settings, the person who called you will either be
forwarded to your voice mail or hear a busy signal.
Activate voice Dialing*
Press the MFB once. Wait for the beep and then
announce the name you wish to call
For best results, record the voice-dialing tag through your
headset. Please consult your phone’s user manual for
more information about using this feature.
Redial last Number*
Press the MFB twice when the headset is on and not in use.
12
13
What the lights Mean
Using the HB200M with 2 Mobile Phones
Hisense HB200M is capable of having two mobile phones
connected to the headset at the same time. This will give
you the freedom of having only one headset to operate
both your mobile phones and the operation of the func-
tions in the headset functions as described above.
What you see
What does this
mean about your
headset
When
Red light flashes
twice and then
on continuously
charging
headset is
connected
to charger
How to pair a second mobile phone
1. Turn off Bluetooth function of the first connected
phone temporarily
ץ Solid Blue
charging
completed
2. launch the pairing steps (the same pairing steps as
in the first phone) for the second mobile phone;
3. After the second phone is paired, turn off the
Bluetooth headset, then turn on the first paired
phone’s Bluetooth function.
When
headset
is not
connected
to charger
Red and Blue
light flashes
alternativly
Pairing
4. Restart the headset. The headset will connect to
Blue light flashes connected or
3 times quickly
both phones automatically.
standby
Red light flashes
3 times quickly
Awaiting for
connection
NoTE: last Number Redial will dial the number from
the last outgoing call, independent of the mobile
phones, and the voice dialing function only will
work on the last paired mobile phone.
In connection or
standby mode,
red light flashes
3 times quickly
low battery alert
14
15
Troubleshooting
Taking Care of your Headset
I hear crackling noises
For the best audio quality, always wear your headset on
the same side of the body as your mobile phone.
•
•
Always store the Hisense HB200M with the power
off and safely protected.
Avoid storage at extreme temperatures (above
45°c/113°F – including direct sunlight – or below
-10°c/14°F). This can shorten battery life and may
affect operation. High temperatures may also de-
grade performance.
I cannot hear anything in my headset
Increase the volume on the mobile phone.
Ensure that the headset is paired with the phone.
Make sure that the phone is connected to the headset – if
it does not either connect from the phone’s Bluetooth menu
or by pressing the MFB, follow the pairing procedure.
•
do not expose the Hisense HB200M to rain or other
liquids.
I have pairing problems even though my phone indicates
otherwise
You may have deleted your headset pairing connection in
your mobile phone.
Glossary
Bluetooth
Follow the pairing instructions in page 8.
The Bluetooth® trademark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Hisense
is under license. Other trademarks and trade names are
those of their respective owners.
Will the Hisense HB200M work with other Bluetooth
equipment?
The Hisense HB200M is designed to work with Bluetooth
mobile phones. It can also work with other Bluetooth
devices that are compliant with Bluetooth version 2.1
and support a headset and/or hands-free profile.
1 . Bluetooth is a radio technology that connects
devices, such as mobile phones and headsets,
without wires or cords over a short distance (approx.
2. Bluetooth profiles are the different ways that
Bluetooth devices communicate with other devices.
16
17
Bluetooth phones support either the headset profile,
the hands-free profile or both. In order to support
a certain profile, a phone manufacturer must
implement certain mandatory features within the
phone’s software.
3. Pairing creates a unique and encrypted link between
two Bluetooth devices and lets them communicate
with each other. Bluetooth devices will not work if
the devices have not been paired successfully.
4. Passkey or PIN is a code that you enter on your
mobile phone to pair it with your Hisense HB200M.
This makes your phone and the Hisense HB200M
recognize each other and automatically work
together.
5. Standby mode is when the Hisense HB200M is
passively waiting for a call. When you ‘end’ a call
on your mobile phone, the headset goes into
standby mode.
dispose of the product according to local standards and
regulations or local laws.
18
19
|