What is the WinTV-DCR-2650?
Installation instructions for the WinTV-DCR-2650
WinTV-DCR-2650
WinTV-DCR-2650 is a cable TV box which, unlike a cable TV box you might get from your cable
TV company and which connects to a TV set, uses Windows Media Center to watch and
record your favorite TV programs. WinTV-DCR-2650 has two cable TV tuners built-in, so with
Windows Media Center you can record two programs at the same time, or you can watch one
program while recording another.
Installation overview (see below for details on each step)
A CableCARD receiver for
Windows Media Center
Step 1. Run the Windows Digital Cable Advisor to make sure your PC is compatible with the
WinTV-DCR-2650.
Step 2. Plug the WinTV-DCR-2650 into your PC via the USB cable.
Plug in the power to WinTV-DCR-2650.
Like a normal cable box, the WinTV-DCR-2650 allows you to watch and record all of the cable
TV programs you subscribe to. This includes premium channels such as HBO and ESPN. The
only cable TV programs you cannot watch with the WinTV-DCR-2650 are Pay-per-View and
Video on Demand programs.
Quick Installation Guide
Install the Windows driver from the WinTV-DCR-2650 Installation CD-ROM.
Install your cable TV tuning adapter (if necessary) you received from your cable oper-
ator on your PC.
Connect cable TV to the WinTV-DCR-2650.
Insert the CableCARD you received from your cable operator into the back of WinTV-
DCR-2650.
©2011 Hauppauge Computer Works, Inc.
QI-wintv-dcr-2650_v1.1_ENG September 15, 2011
Hauppauge Computer Works, Inc.
91 Cabot Court
Telephone: 631-434-1600
Fax: 631-434-3198
Unlike a cable TV box, you buy WinTV-DCR-2650 instead of renting it from your local cable TV
company.
Hauppauge, NY 11788
Tech Support: 631-434-3197
Hours: M-F 9:00AM to 6:30PM EST
To operate, WinTV-DCR-2650 requires two things:
-
WinTV-DCR-2650 needs to be connected to a Windows 7 PC in order to operate. At this
time, WinTV-DCR-2650 will only work with Windows 7 and will only work with Windows
Media Center which is included in Windows 7.
Step 3. Run the Windows Media Center TV Tuner setup and select your cable TV operator.
Sales: [email protected]
Step 4. Call your cable TV company to activate your cable card and “pair” it to the
WinTV-DCR-2650
Included with WinTV-DCR-2650:
-
The WinTV-DCR-2650 requires a “cable card” to operate. All cable TV operators in the U.S.
have cable cards you can rent for a price of around $5 per month. Most cable TV opera-
tors can either mail you a cable card, or you can pick one up from your cable operators
customer service center.
Installation notes
•
•
•
•
WinTV-DCR-2650 Digital CableCARD receiver dual tuner, USB connected
USB cable 1 meter
-
You cannot install the WinTV-DCR-2650 unless you have first run the Windows Digital
Cable Advisor
Wall mounted power adapter 5v @ 2a
WinTV-DCR-2650 can
be installed by you. It
does not require a
technician to install or
activate.
WinTV-DCR-2650 installation CD, with drivers for Windows 7
Step 1. Run the Windows Digital Cable Advisor
To run Digital Cable Advisor, follow these steps:
1a. Start Windows Media Center
ote: It is recommended to run the Digital Cable Advisor in a reduced size window
N(not Maximized) in order to view all system prompts more easily. If this is your
first time running Windows Media Center, you will be requested to complete a quick
Media Center setup process at this point. If asked, do not setup the TV tuners until
the Digital Cable Advisor has been completed.
System indi-
cator from
your PC
Cable TV
indicator
Tuner 1
in use
Tuner 2
in use
page 1
page 2
page 3
1b. Navigate to Extras / Extras Gallery
-
-
Read the End User License Agreement and choose to Accept
operator into the connector marked M-Card only on the back of WinTV-DCR-2650.
If you do not see the Extras Gallery, it can be
downloaded manually from the following
Internet links:
If you accepted the End User License Agreement, the Digital Cable Advisor will install,
which can take a couple of minutes.
ote: the label on the cable card should face up. If you plug the cable card in
Nupside down, the green Cable light on the front of WinTV-DCR-2650 will not light.
-
-
-
Click Next on the Welcome to the Digital Cable Advisor screen.
Then plug the USB cable into the back
of WinTV-DCR-2650 and plug the other
end into an open USB port on your PC.
x86 - 32 bit Windows 7:
Select I Agree and click Next on the Digital Cable Advisor Terms of Service screen.
Click Start Test on the Welcome to the Digital Cable Advisor / Analyze System screen.
The Digital Cable Advisor will begin testing your system which can take several minutes to
complete. Your screen may flash several times as a normal part of the test.
x64 - 64 bit Windows 7:
Next, plug the power supply into WinTV-
DCR-2650.
If you are downloading the Extras Gallery,
and you don’t see the Extras Gallery
icon, it is probably still downloading.
Wait a few minutes and check back.
-
Click Next on the Welcome to the Digital Cable Advisor / Analyze System screen
once it says System analysis complete.
Windows 7 should recognize that a new
hardware device has been connected.
Insert the “WinTV-DCR-2650
Installation CD” into your CD drive
and install the Windows driver.
Step 2.
Install the WinTV-DCR-2650 and plug into your PC
Click on extras gallery.
Plug in your cable TV wire to Cable In and insert the CableCARD you received from your cable
You should see a picture of a coax
cable as part of the extras gallery.
Click Step 1. Chose your language and
click Next. Once the Windows driver
has been installed, you will see a mes-
sage Drivers have been updated
Sucessfully.
Click the picture of the COAX cable
to run the Digital Cable Advisor.
ote: if you get an error mes-
Nsage Unable to launch,
then wait about 15 minutes and
try again. This normally means
that Windows Media Center is
still loading the Digital Cable
Advisor.
After the Windows driver has been
installed, click Step 2. Click Next to
update firmware. You will receive a con-
firmation that the firmware has been
updated or it is already up to date.
You will see a message Are you using
a tuning adapter?. If you cable TV
operator requires you to use a tuning
adapter to see all of your cable chan-
nels, click Yes, then Next and Finish to
install the tuning adapter support.
Once the Digital Cable Advisor starts,
you will see the Welcome message:
Cable card
Power
plugs in here
Cable TV
USB cable to
your PC
supply
-
Click Install to download the
Digital Cable Advisor and Confirm
you want to download the file.
plugs in here
Once the Windows driver is loaded and
the WinTV-DCR-2650 firmware has been
page 4
page 5
page 6
|